Commit | Line | Data |
---|---|---|
a8aceccb TK |
1 | /* |
2 | * TI clock drivers support | |
3 | * | |
4 | * Copyright (C) 2013 Texas Instruments, Inc. | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | * | |
10 | * This program is distributed "as is" WITHOUT ANY WARRANTY of any | |
11 | * kind, whether express or implied; without even the implied warranty | |
12 | * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | * GNU General Public License for more details. | |
14 | */ | |
15 | #ifndef __LINUX_CLK_TI_H__ | |
16 | #define __LINUX_CLK_TI_H__ | |
17 | ||
e387088a | 18 | #include <linux/clk-provider.h> |
a8aceccb TK |
19 | #include <linux/clkdev.h> |
20 | ||
f38b0dd6 TK |
21 | /** |
22 | * struct dpll_data - DPLL registers and integration data | |
23 | * @mult_div1_reg: register containing the DPLL M and N bitfields | |
24 | * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg | |
25 | * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg | |
26 | * @clk_bypass: struct clk pointer to the clock's bypass clock input | |
27 | * @clk_ref: struct clk pointer to the clock's reference clock input | |
28 | * @control_reg: register containing the DPLL mode bitfield | |
29 | * @enable_mask: mask of the DPLL mode bitfield in @control_reg | |
30 | * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() | |
31 | * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() | |
32 | * @last_rounded_m4xen: cache of the last M4X result of | |
33 | * omap4_dpll_regm4xen_round_rate() | |
34 | * @last_rounded_lpmode: cache of the last lpmode result of | |
35 | * omap4_dpll_lpmode_recalc() | |
36 | * @max_multiplier: maximum valid non-bypass multiplier value (actual) | |
37 | * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() | |
38 | * @min_divider: minimum valid non-bypass divider value (actual) | |
39 | * @max_divider: maximum valid non-bypass divider value (actual) | |
40 | * @modes: possible values of @enable_mask | |
41 | * @autoidle_reg: register containing the DPLL autoidle mode bitfield | |
42 | * @idlest_reg: register containing the DPLL idle status bitfield | |
43 | * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg | |
44 | * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg | |
ce369a54 AT |
45 | * @dcc_mask: mask of the DPLL DCC correction bitfield @mult_div1_reg |
46 | * @dcc_rate: rate atleast which DCC @dcc_mask must be set | |
f38b0dd6 TK |
47 | * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg |
48 | * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg | |
49 | * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg | |
50 | * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg | |
51 | * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs | |
52 | * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs | |
53 | * @flags: DPLL type/features (see below) | |
54 | * | |
55 | * Possible values for @flags: | |
56 | * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) | |
57 | * | |
58 | * @freqsel_mask is only used on the OMAP34xx family and AM35xx. | |
59 | * | |
60 | * XXX Some DPLLs have multiple bypass inputs, so it's not technically | |
61 | * correct to only have one @clk_bypass pointer. | |
62 | * | |
63 | * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, | |
64 | * @last_rounded_n) should be separated from the runtime-fixed fields | |
65 | * and placed into a different structure, so that the runtime-fixed data | |
66 | * can be placed into read-only space. | |
67 | */ | |
68 | struct dpll_data { | |
69 | void __iomem *mult_div1_reg; | |
70 | u32 mult_mask; | |
71 | u32 div1_mask; | |
72 | struct clk *clk_bypass; | |
73 | struct clk *clk_ref; | |
74 | void __iomem *control_reg; | |
75 | u32 enable_mask; | |
76 | unsigned long last_rounded_rate; | |
77 | u16 last_rounded_m; | |
78 | u8 last_rounded_m4xen; | |
79 | u8 last_rounded_lpmode; | |
80 | u16 max_multiplier; | |
81 | u8 last_rounded_n; | |
82 | u8 min_divider; | |
83 | u16 max_divider; | |
84 | u8 modes; | |
85 | void __iomem *autoidle_reg; | |
86 | void __iomem *idlest_reg; | |
87 | u32 autoidle_mask; | |
88 | u32 freqsel_mask; | |
89 | u32 idlest_mask; | |
90 | u32 dco_mask; | |
91 | u32 sddiv_mask; | |
ce369a54 AT |
92 | u32 dcc_mask; |
93 | unsigned long dcc_rate; | |
f38b0dd6 TK |
94 | u32 lpmode_mask; |
95 | u32 m4xen_mask; | |
96 | u8 auto_recal_bit; | |
97 | u8 recal_en_bit; | |
98 | u8 recal_st_bit; | |
99 | u8 flags; | |
100 | }; | |
101 | ||
4d008589 TK |
102 | struct clk_hw_omap; |
103 | ||
104 | /** | |
105 | * struct clk_hw_omap_ops - OMAP clk ops | |
106 | * @find_idlest: find idlest register information for a clock | |
107 | * @find_companion: find companion clock register information for a clock, | |
108 | * basically converts CM_ICLKEN* <-> CM_FCLKEN* | |
109 | * @allow_idle: enables autoidle hardware functionality for a clock | |
110 | * @deny_idle: prevent autoidle hardware functionality for a clock | |
111 | */ | |
112 | struct clk_hw_omap_ops { | |
113 | void (*find_idlest)(struct clk_hw_omap *oclk, | |
114 | void __iomem **idlest_reg, | |
115 | u8 *idlest_bit, u8 *idlest_val); | |
116 | void (*find_companion)(struct clk_hw_omap *oclk, | |
117 | void __iomem **other_reg, | |
118 | u8 *other_bit); | |
119 | void (*allow_idle)(struct clk_hw_omap *oclk); | |
120 | void (*deny_idle)(struct clk_hw_omap *oclk); | |
121 | }; | |
f38b0dd6 TK |
122 | |
123 | /** | |
124 | * struct clk_hw_omap - OMAP struct clk | |
125 | * @node: list_head connecting this clock into the full clock list | |
126 | * @enable_reg: register to write to enable the clock (see @enable_bit) | |
127 | * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) | |
128 | * @flags: see "struct clk.flags possibilities" above | |
129 | * @clksel_reg: for clksel clks, register va containing src/divisor select | |
130 | * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector | |
131 | * @clksel: for clksel clks, pointer to struct clksel for this clock | |
132 | * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock | |
133 | * @clkdm_name: clockdomain name that this clock is contained in | |
134 | * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime | |
135 | * @ops: clock ops for this clock | |
136 | */ | |
137 | struct clk_hw_omap { | |
138 | struct clk_hw hw; | |
139 | struct list_head node; | |
140 | unsigned long fixed_rate; | |
141 | u8 fixed_div; | |
142 | void __iomem *enable_reg; | |
143 | u8 enable_bit; | |
144 | u8 flags; | |
145 | void __iomem *clksel_reg; | |
146 | u32 clksel_mask; | |
147 | const struct clksel *clksel; | |
148 | struct dpll_data *dpll_data; | |
149 | const char *clkdm_name; | |
150 | struct clockdomain *clkdm; | |
151 | const struct clk_hw_omap_ops *ops; | |
152 | }; | |
153 | ||
154 | /* | |
155 | * struct clk_hw_omap.flags possibilities | |
156 | * | |
157 | * XXX document the rest of the clock flags here | |
158 | * | |
159 | * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed | |
160 | * with 32bit ops, by default OMAP1 uses 16bit ops. | |
161 | * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support. | |
162 | * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent | |
163 | * clock is put to no-idle mode. | |
164 | * ENABLE_ON_INIT: Clock is enabled on init. | |
165 | * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0' | |
166 | * disable. This inverts the behavior making '0' enable and '1' disable. | |
167 | * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL | |
168 | * bits share the same register. This flag allows the | |
169 | * omap4_dpllmx*() code to determine which GATE_CTRL bit field | |
170 | * should be used. This is a temporary solution - a better approach | |
171 | * would be to associate clock type-specific data with the clock, | |
172 | * similar to the struct dpll_data approach. | |
173 | * MEMMAP_ADDRESSING: Use memmap addressing to access clock registers. | |
174 | */ | |
175 | #define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ | |
176 | #define CLOCK_IDLE_CONTROL (1 << 1) | |
177 | #define CLOCK_NO_IDLE_PARENT (1 << 2) | |
178 | #define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ | |
179 | #define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ | |
180 | #define CLOCK_CLKOUTX2 (1 << 5) | |
181 | #define MEMMAP_ADDRESSING (1 << 6) | |
182 | ||
183 | /* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ | |
184 | #define DPLL_LOW_POWER_STOP 0x1 | |
185 | #define DPLL_LOW_POWER_BYPASS 0x5 | |
186 | #define DPLL_LOCKED 0x7 | |
187 | ||
188 | /* DPLL Type and DCO Selection Flags */ | |
189 | #define DPLL_J_TYPE 0x1 | |
190 | ||
975e1548 TK |
191 | /* Composite clock component types */ |
192 | enum { | |
193 | CLK_COMPONENT_TYPE_GATE = 0, | |
194 | CLK_COMPONENT_TYPE_DIVIDER, | |
195 | CLK_COMPONENT_TYPE_MUX, | |
196 | CLK_COMPONENT_TYPE_MAX, | |
197 | }; | |
198 | ||
a8aceccb TK |
199 | /** |
200 | * struct ti_dt_clk - OMAP DT clock alias declarations | |
201 | * @lk: clock lookup definition | |
202 | * @node_name: clock DT node to map to | |
203 | */ | |
204 | struct ti_dt_clk { | |
205 | struct clk_lookup lk; | |
206 | char *node_name; | |
207 | }; | |
208 | ||
209 | #define DT_CLK(dev, con, name) \ | |
210 | { \ | |
211 | .lk = { \ | |
212 | .dev_id = dev, \ | |
213 | .con_id = con, \ | |
214 | }, \ | |
215 | .node_name = name, \ | |
216 | } | |
217 | ||
74807dff TK |
218 | /* Static memmap indices */ |
219 | enum { | |
220 | TI_CLKM_CM = 0, | |
3a3e1c88 | 221 | TI_CLKM_CM2, |
74807dff TK |
222 | TI_CLKM_PRM, |
223 | TI_CLKM_SCRM, | |
fe87414f TK |
224 | TI_CLKM_CTRL, |
225 | CLK_MAX_MEMMAPS | |
74807dff TK |
226 | }; |
227 | ||
819b4861 TK |
228 | typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *); |
229 | ||
230 | /** | |
231 | * struct clk_omap_reg - OMAP register declaration | |
232 | * @offset: offset from the master IP module base address | |
233 | * @index: index of the master IP module | |
234 | */ | |
235 | struct clk_omap_reg { | |
236 | u16 offset; | |
237 | u16 index; | |
238 | }; | |
239 | ||
240 | /** | |
241 | * struct ti_clk_ll_ops - low-level register access ops for a clock | |
242 | * @clk_readl: pointer to register read function | |
243 | * @clk_writel: pointer to register write function | |
244 | * | |
245 | * Low-level register access ops are generally used by the basic clock types | |
246 | * (clk-gate, clk-mux, clk-divider etc.) to provide support for various | |
247 | * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be | |
248 | * used by other hardware-specific clock drivers if needed. | |
249 | */ | |
250 | struct ti_clk_ll_ops { | |
251 | u32 (*clk_readl)(void __iomem *reg); | |
252 | void (*clk_writel)(u32 val, void __iomem *reg); | |
253 | }; | |
254 | ||
255 | extern struct ti_clk_ll_ops *ti_clk_ll_ops; | |
256 | ||
b4761198 | 257 | extern const struct clk_ops ti_clk_divider_ops; |
6a369c58 | 258 | extern const struct clk_ops ti_clk_mux_ops; |
b4761198 | 259 | |
f38b0dd6 TK |
260 | #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) |
261 | ||
262 | void omap2_init_clk_hw_omap_clocks(struct clk *clk); | |
263 | int omap3_noncore_dpll_enable(struct clk_hw *hw); | |
264 | void omap3_noncore_dpll_disable(struct clk_hw *hw); | |
d539efa3 | 265 | int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index); |
f38b0dd6 TK |
266 | int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, |
267 | unsigned long parent_rate); | |
d539efa3 TK |
268 | int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw, |
269 | unsigned long rate, | |
270 | unsigned long parent_rate, | |
271 | u8 index); | |
0817b62c BB |
272 | int omap3_noncore_dpll_determine_rate(struct clk_hw *hw, |
273 | struct clk_rate_request *req); | |
f38b0dd6 TK |
274 | unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, |
275 | unsigned long parent_rate); | |
276 | long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, | |
277 | unsigned long target_rate, | |
278 | unsigned long *parent_rate); | |
0817b62c BB |
279 | int omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, |
280 | struct clk_rate_request *req); | |
f38b0dd6 TK |
281 | u8 omap2_init_dpll_parent(struct clk_hw *hw); |
282 | unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); | |
283 | long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, | |
284 | unsigned long *parent_rate); | |
285 | void omap2_init_clk_clkdm(struct clk_hw *clk); | |
286 | unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, | |
287 | unsigned long parent_rate); | |
994c41ee TV |
288 | int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate, |
289 | unsigned long parent_rate); | |
290 | long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate, | |
291 | unsigned long *prate); | |
f60b1ea5 TK |
292 | int omap2_clkops_enable_clkdm(struct clk_hw *hw); |
293 | void omap2_clkops_disable_clkdm(struct clk_hw *hw); | |
21876ea5 | 294 | int omap2_clk_disable_autoidle_all(void); |
45622e21 | 295 | void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); |
f38b0dd6 TK |
296 | int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, |
297 | unsigned long parent_rate); | |
e3ab6013 TK |
298 | int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, |
299 | unsigned long parent_rate, u8 index); | |
975e1548 TK |
300 | int omap2_dflt_clk_enable(struct clk_hw *hw); |
301 | void omap2_dflt_clk_disable(struct clk_hw *hw); | |
302 | int omap2_dflt_clk_is_enabled(struct clk_hw *hw); | |
aafd900c | 303 | void omap3_clk_lock_dpll5(void); |
aa76fcf4 TK |
304 | unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, |
305 | unsigned long parent_rate); | |
306 | int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, | |
307 | unsigned long parent_rate); | |
308 | void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); | |
61f25ca7 | 309 | void omap2xxx_clkt_vps_init(void); |
f38b0dd6 | 310 | |
819b4861 | 311 | void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); |
a8aceccb | 312 | void ti_dt_clocks_register(struct ti_dt_clk *oclks); |
819b4861 | 313 | void ti_dt_clk_init_provider(struct device_node *np, int index); |
c08ee14c | 314 | void ti_dt_clk_init_retry_clks(void); |
3cd4a596 | 315 | void ti_dt_clockdomains_setup(void); |
819b4861 TK |
316 | int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw, |
317 | ti_of_clk_init_cb_t func); | |
b1a07b47 | 318 | int of_ti_clk_autoidle_setup(struct device_node *node); |
975e1548 | 319 | int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type); |
b1a07b47 | 320 | |
aafd900c TK |
321 | int omap3430_dt_clk_init(void); |
322 | int omap3630_dt_clk_init(void); | |
323 | int am35xx_dt_clk_init(void); | |
324 | int ti81xx_dt_clk_init(void); | |
21876ea5 | 325 | int omap4xxx_dt_clk_init(void); |
52b14728 | 326 | int omap5xxx_dt_clk_init(void); |
251a449d | 327 | int dra7xx_dt_clk_init(void); |
45622e21 | 328 | int am33xx_dt_clk_init(void); |
ffab2399 | 329 | int am43xx_dt_clk_init(void); |
be67c3bf TK |
330 | int omap2420_dt_clk_init(void); |
331 | int omap2430_dt_clk_init(void); | |
21876ea5 | 332 | |
b1a07b47 TK |
333 | #ifdef CONFIG_OF |
334 | void of_ti_clk_allow_autoidle_all(void); | |
335 | void of_ti_clk_deny_autoidle_all(void); | |
336 | #else | |
337 | static inline void of_ti_clk_allow_autoidle_all(void) { } | |
338 | static inline void of_ti_clk_deny_autoidle_all(void) { } | |
339 | #endif | |
a8aceccb | 340 | |
aa76fcf4 | 341 | extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; |
de742570 | 342 | extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; |
f38b0dd6 TK |
343 | extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; |
344 | extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; | |
f60b1ea5 TK |
345 | extern const struct clk_hw_omap_ops clkhwops_wait; |
346 | extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; | |
347 | extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; | |
24582b34 TK |
348 | extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait; |
349 | extern const struct clk_hw_omap_ops clkhwops_iclk; | |
f60b1ea5 | 350 | extern const struct clk_hw_omap_ops clkhwops_iclk_wait; |
24582b34 TK |
351 | extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait; |
352 | extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait; | |
353 | extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait; | |
f38b0dd6 | 354 | |
6793a30a | 355 | #ifdef CONFIG_ATAGS |
74807dff TK |
356 | int omap3430_clk_legacy_init(void); |
357 | int omap3430es1_clk_legacy_init(void); | |
358 | int omap36xx_clk_legacy_init(void); | |
359 | int am35xx_clk_legacy_init(void); | |
6793a30a AB |
360 | #else |
361 | static inline int omap3430_clk_legacy_init(void) { return -ENXIO; } | |
362 | static inline int omap3430es1_clk_legacy_init(void) { return -ENXIO; } | |
363 | static inline int omap36xx_clk_legacy_init(void) { return -ENXIO; } | |
364 | static inline int am35xx_clk_legacy_init(void) { return -ENXIO; } | |
365 | #endif | |
366 | ||
74807dff | 367 | |
a8aceccb | 368 | #endif |