[GitHub/mt8127/android_kernel_alcatel_ttab.git] / include / asm-x86 / serial.h

#ifndef _ASM_X86_SERIAL_H
#define _ASM_X86_SERIAL_H

/*
 * This assumes you have a 1.8432 MHz clock for your UART.
 *
 * It'd be nice if someone built a serial card with a 24.576 MHz
 * clock, since the 16550A is capable of handling a top speed of 1.5
 * megabits/second; but this requires the faster clock.
 */
#define BASE_BAUD ( 1843200 / 16 )

/* Standard COM flags (except for COM4, because of the 8514 problem) */
#ifdef CONFIG_SERIAL_DETECT_IRQ
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
#else
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
#endif

#define SERIAL_PORT_DFNS			\
	/* UART CLK   PORT IRQ     FLAGS        */			\
	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */

#endif /* _ASM_X86_SERIAL_H */
Commit	Line	Data
217d115c RD	1	#ifndef _ASM_X86_SERIAL_H
	2	#define _ASM_X86_SERIAL_H
	3
	4	/*
	5	* This assumes you have a 1.8432 MHz clock for your UART.
	6	*
	7	* It'd be nice if someone built a serial card with a 24.576 MHz
	8	* clock, since the 16550A is capable of handling a top speed of 1.5
	9	* megabits/second; but this requires the faster clock.
	10	*/
	11	#define BASE_BAUD ( 1843200 / 16 )
	12
	13	/* Standard COM flags (except for COM4, because of the 8514 problem) */
	14	#ifdef CONFIG_SERIAL_DETECT_IRQ
	15	#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF \| ASYNC_SKIP_TEST \| ASYNC_AUTO_IRQ)
	16	#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF \| ASYNC_AUTO_IRQ)
96a388de	17	#else
217d115c RD	18	#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF \| ASYNC_SKIP_TEST)
217d115c RD	19	#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
96a388de	20	#endif
217d115c RD	21
	22	#define SERIAL_PORT_DFNS \
	23	/* UART CLK PORT IRQ FLAGS */ \
	24	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
	25	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
	26	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
	27	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
	28
	29	#endif /* _ASM_X86_SERIAL_H */