[GitHub/mt8127/android_kernel_alcatel_ttab.git] / include / asm-ia64 / system.h

#ifndef _ASM_IA64_SYSTEM_H
#define _ASM_IA64_SYSTEM_H

/*
 * System defines. Note that this is included both from .c and .S
 * files, so it does only defines, not any C code.  This is based
 * on information published in the Processor Abstraction Layer
 * and the System Abstraction Layer manual.
 *
 * Copyright (C) 1998-2003 Hewlett-Packard Co
 *	David Mosberger-Tang <davidm@hpl.hp.com>
 * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
 * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
 */

#include <asm/kregs.h>
#include <asm/page.h>
#include <asm/pal.h>
#include <asm/percpu.h>

#define GATE_ADDR		RGN_BASE(RGN_GATE)

/*
 * 0xa000000000000000+2*PERCPU_PAGE_SIZE
 * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
 */
#define KERNEL_START		 (GATE_ADDR+__IA64_UL_CONST(0x100000000))
#define PERCPU_ADDR		(-PERCPU_PAGE_SIZE)

#ifndef __ASSEMBLY__

#include <linux/kernel.h>
#include <linux/types.h>

struct pci_vector_struct {
	__u16 segment;	/* PCI Segment number */
	__u16 bus;	/* PCI Bus number */
	__u32 pci_id;	/* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
	__u8 pin;	/* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
	__u32 irq;	/* IRQ assigned */
};

extern struct ia64_boot_param {
	__u64 command_line;		/* physical address of command line arguments */
	__u64 efi_systab;		/* physical address of EFI system table */
	__u64 efi_memmap;		/* physical address of EFI memory map */
	__u64 efi_memmap_size;		/* size of EFI memory map */
	__u64 efi_memdesc_size;		/* size of an EFI memory map descriptor */
	__u32 efi_memdesc_version;	/* memory descriptor version */
	struct {
		__u16 num_cols;	/* number of columns on console output device */
		__u16 num_rows;	/* number of rows on console output device */
		__u16 orig_x;	/* cursor's x position */
		__u16 orig_y;	/* cursor's y position */
	} console_info;
	__u64 fpswa;		/* physical address of the fpswa interface */
	__u64 initrd_start;
	__u64 initrd_size;
} *ia64_boot_param;

/*
 * Macros to force memory ordering.  In these descriptions, "previous"
 * and "subsequent" refer to program order; "visible" means that all
 * architecturally visible effects of a memory access have occurred
 * (at a minimum, this means the memory has been read or written).
 *
 *   wmb():	Guarantees that all preceding stores to memory-
 *		like regions are visible before any subsequent
 *		stores and that all following stores will be
 *		visible only after all previous stores.
 *   rmb():	Like wmb(), but for reads.
 *   mb():	wmb()/rmb() combo, i.e., all previous memory
 *		accesses are visible before all subsequent
 *		accesses and vice versa.  This is also known as
 *		a "fence."
 *
 * Note: "mb()" and its variants cannot be used as a fence to order
 * accesses to memory mapped I/O registers.  For that, mf.a needs to
 * be used.  However, we don't want to always use mf.a because (a)
 * it's (presumably) much slower than mf and (b) mf.a is supported for
 * sequential memory pages only.
 */
#define mb()	ia64_mf()
#define rmb()	mb()
#define wmb()	mb()
#define read_barrier_depends()	do { } while(0)

#ifdef CONFIG_SMP
# define smp_mb()	mb()
# define smp_rmb()	rmb()
# define smp_wmb()	wmb()
# define smp_read_barrier_depends()	read_barrier_depends()
#else
# define smp_mb()	barrier()
# define smp_rmb()	barrier()
# define smp_wmb()	barrier()
# define smp_read_barrier_depends()	do { } while(0)
#endif

/*
 * XXX check on this ---I suspect what Linus really wants here is
 * acquire vs release semantics but we can't discuss this stuff with
 * Linus just yet.  Grrr...
 */
#define set_mb(var, value)	do { (var) = (value); mb(); } while (0)

#define safe_halt()         ia64_pal_halt_light()    /* PAL_HALT_LIGHT */

/*
 * The group barrier in front of the rsm & ssm are necessary to ensure
 * that none of the previous instructions in the same group are
 * affected by the rsm/ssm.
 */
/* For spinlocks etc */

/*
 * - clearing psr.i is implicitly serialized (visible by next insn)
 * - setting psr.i requires data serialization
 * - we need a stop-bit before reading PSR because we sometimes
 *   write a floating-point register right before reading the PSR
 *   and that writes to PSR.mfl
 */
#define __local_irq_save(x)			\
do {						\
	ia64_stop();				\
	(x) = ia64_getreg(_IA64_REG_PSR);	\
	ia64_stop();				\
	ia64_rsm(IA64_PSR_I);			\
} while (0)

#define __local_irq_disable()			\
do {						\
	ia64_stop();				\
	ia64_rsm(IA64_PSR_I);			\
} while (0)

#define __local_irq_restore(x)	ia64_intrin_local_irq_restore((x) & IA64_PSR_I)

#ifdef CONFIG_IA64_DEBUG_IRQ

  extern unsigned long last_cli_ip;

# define __save_ip()		last_cli_ip = ia64_getreg(_IA64_REG_IP)

# define local_irq_save(x)					\
do {								\
	unsigned long psr;					\
								\
	__local_irq_save(psr);					\
	if (psr & IA64_PSR_I)					\
		__save_ip();					\
	(x) = psr;						\
} while (0)

# define local_irq_disable()	do { unsigned long x; local_irq_save(x); } while (0)

# define local_irq_restore(x)					\
do {								\
	unsigned long old_psr, psr = (x);			\
								\
	local_save_flags(old_psr);				\
	__local_irq_restore(psr);				\
	if ((old_psr & IA64_PSR_I) && !(psr & IA64_PSR_I))	\
		__save_ip();					\
} while (0)

#else /* !CONFIG_IA64_DEBUG_IRQ */
# define local_irq_save(x)	__local_irq_save(x)
# define local_irq_disable()	__local_irq_disable()
# define local_irq_restore(x)	__local_irq_restore(x)
#endif /* !CONFIG_IA64_DEBUG_IRQ */

#define local_irq_enable()	({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); })
#define local_save_flags(flags)	({ ia64_stop(); (flags) = ia64_getreg(_IA64_REG_PSR); })

#define irqs_disabled()				\
({						\
	unsigned long __ia64_id_flags;		\
	local_save_flags(__ia64_id_flags);	\
	(__ia64_id_flags & IA64_PSR_I) == 0;	\
})

#ifdef __KERNEL__

#ifdef CONFIG_IA32_SUPPORT
# define IS_IA32_PROCESS(regs)	(ia64_psr(regs)->is != 0)
#else
# define IS_IA32_PROCESS(regs)		0
struct task_struct;
static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
#endif

/*
 * Context switch from one thread to another.  If the two threads have
 * different address spaces, schedule() has already taken care of
 * switching to the new address space by calling switch_mm().
 *
 * Disabling access to the fph partition and the debug-register
 * context switch MUST be done before calling ia64_switch_to() since a
 * newly created thread returns directly to
 * ia64_ret_from_syscall_clear_r8.
 */
extern struct task_struct *ia64_switch_to (void *next_task);

struct task_struct;

extern void ia64_save_extra (struct task_struct *task);
extern void ia64_load_extra (struct task_struct *task);

#ifdef CONFIG_PERFMON
  DECLARE_PER_CPU(unsigned long, pfm_syst_info);
# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
#else
# define PERFMON_IS_SYSWIDE() (0)
#endif

#define IA64_HAS_EXTRA_STATE(t)							\
	((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID)	\
	 || IS_IA32_PROCESS(task_pt_regs(t)) || PERFMON_IS_SYSWIDE())

#define __switch_to(prev,next,last) do {							 \
	if (IA64_HAS_EXTRA_STATE(prev))								 \
		ia64_save_extra(prev);								 \
	if (IA64_HAS_EXTRA_STATE(next))								 \
		ia64_load_extra(next);								 \
	ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next);			 \
	(last) = ia64_switch_to((next));							 \
} while (0)

#ifdef CONFIG_SMP
/*
 * In the SMP case, we save the fph state when context-switching away from a thread that
 * modified fph.  This way, when the thread gets scheduled on another CPU, the CPU can
 * pick up the state from task->thread.fph, avoiding the complication of having to fetch
 * the latest fph state from another CPU.  In other words: eager save, lazy restore.
 */
# define switch_to(prev,next,last) do {						\
	if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) {				\
		ia64_psr(task_pt_regs(prev))->mfh = 0;			\
		(prev)->thread.flags |= IA64_THREAD_FPH_VALID;			\
		__ia64_save_fpu((prev)->thread.fph);				\
	}									\
	__switch_to(prev, next, last);						\
	/* "next" in old context is "current" in new context */			\
	if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) &&	       \
		     (task_cpu(current) !=				       \
		      		      task_thread_info(current)->last_cpu))) { \
		platform_migrate(current);				       \
		task_thread_info(current)->last_cpu = task_cpu(current);       \
	}								       \
} while (0)
#else
# define switch_to(prev,next,last)	__switch_to(prev, next, last)
#endif

#define __ARCH_WANT_UNLOCKED_CTXSW
#define ARCH_HAS_PREFETCH_SWITCH_STACK
#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)

void cpu_idle_wait(void);

#define arch_align_stack(x) (x)

void default_idle(void);

#endif /* __KERNEL__ */

#endif /* __ASSEMBLY__ */

#endif /* _ASM_IA64_SYSTEM_H */
Commit	Line	Data
1da177e4 LT	1	#ifndef _ASM_IA64_SYSTEM_H
	2	#define _ASM_IA64_SYSTEM_H
	3
	4	/*
	5	* System defines. Note that this is included both from .c and .S
	6	* files, so it does only defines, not any C code. This is based
	7	* on information published in the Processor Abstraction Layer
	8	* and the System Abstraction Layer manual.
	9	*
	10	* Copyright (C) 1998-2003 Hewlett-Packard Co
	11	* David Mosberger-Tang <davidm@hpl.hp.com>
	12	* Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
	13	* Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
	14	*/
1da177e4 LT	15
	16	#include <asm/kregs.h>
	17	#include <asm/page.h>
	18	#include <asm/pal.h>
	19	#include <asm/percpu.h>
	20
0a41e250 PC	21	#define GATE_ADDR RGN_BASE(RGN_GATE)
0a41e250 PC	22
1da177e4 LT	23	/*
	24	* 0xa000000000000000+2*PERCPU_PAGE_SIZE
	25	* - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
	26	*/
e037cda5	27	#define KERNEL_START (GATE_ADDR+__IA64_UL_CONST(0x100000000))
1da177e4 LT	28	#define PERCPU_ADDR (-PERCPU_PAGE_SIZE)
	29
	30	#ifndef __ASSEMBLY__
	31
	32	#include <linux/kernel.h>
	33	#include <linux/types.h>
	34
	35	struct pci_vector_struct {
	36	__u16 segment; /* PCI Segment number */
	37	__u16 bus; /* PCI Bus number */
	38	__u32 pci_id; /* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
	39	__u8 pin; /* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
	40	__u32 irq; /* IRQ assigned */
	41	};
	42
	43	extern struct ia64_boot_param {
	44	__u64 command_line; /* physical address of command line arguments */
	45	__u64 efi_systab; /* physical address of EFI system table */
	46	__u64 efi_memmap; /* physical address of EFI memory map */
	47	__u64 efi_memmap_size; /* size of EFI memory map */
	48	__u64 efi_memdesc_size; /* size of an EFI memory map descriptor */
	49	__u32 efi_memdesc_version; /* memory descriptor version */
	50	struct {
	51	__u16 num_cols; /* number of columns on console output device */
	52	__u16 num_rows; /* number of rows on console output device */
	53	__u16 orig_x; /* cursor's x position */
	54	__u16 orig_y; /* cursor's y position */
	55	} console_info;
	56	__u64 fpswa; /* physical address of the fpswa interface */
	57	__u64 initrd_start;
	58	__u64 initrd_size;
	59	} *ia64_boot_param;
	60
	61	/*
	62	* Macros to force memory ordering. In these descriptions, "previous"
	63	* and "subsequent" refer to program order; "visible" means that all
	64	* architecturally visible effects of a memory access have occurred
	65	* (at a minimum, this means the memory has been read or written).
	66	*
	67	* wmb(): Guarantees that all preceding stores to memory-
	68	* like regions are visible before any subsequent
	69	* stores and that all following stores will be
	70	* visible only after all previous stores.
	71	* rmb(): Like wmb(), but for reads.
	72	* mb(): wmb()/rmb() combo, i.e., all previous memory
	73	* accesses are visible before all subsequent
	74	* accesses and vice versa. This is also known as
	75	* a "fence."
	76	*
	77	* Note: "mb()" and its variants cannot be used as a fence to order
	78	* accesses to memory mapped I/O registers. For that, mf.a needs to
	79	* be used. However, we don't want to always use mf.a because (a)
	80	* it's (presumably) much slower than mf and (b) mf.a is supported for
	81	* sequential memory pages only.
	82	*/
	83	#define mb() ia64_mf()
	84	#define rmb() mb()
	85	#define wmb() mb()
	86	#define read_barrier_depends() do { } while(0)
	87
	88	#ifdef CONFIG_SMP
	89	# define smp_mb() mb()
	90	# define smp_rmb() rmb()
	91	# define smp_wmb() wmb()
92	# define smp_read_barrier_depends() read_barrier_depends()
93	#else
94	# define smp_mb() barrier()
95	# define smp_rmb() barrier()
96	# define smp_wmb() barrier()
97	# define smp_read_barrier_depends() do { } while(0)
98	#endif
99
100	/*
52393ccc	101	* XXX check on this ---I suspect what Linus really wants here is
1da177e4 LT	102	* acquire vs release semantics but we can't discuss this stuff with
	103	* Linus just yet. Grrr...
	104	*/
	105	#define set_mb(var, value) do { (var) = (value); mb(); } while (0)
1da177e4 LT	106
	107	#define safe_halt() ia64_pal_halt_light() /* PAL_HALT_LIGHT */
	108
	109	/*
	110	* The group barrier in front of the rsm & ssm are necessary to ensure
	111	* that none of the previous instructions in the same group are
	112	* affected by the rsm/ssm.
	113	*/
	114	/* For spinlocks etc */
	115
	116	/*
	117	* - clearing psr.i is implicitly serialized (visible by next insn)
	118	* - setting psr.i requires data serialization
	119	* - we need a stop-bit before reading PSR because we sometimes
	120	* write a floating-point register right before reading the PSR
	121	* and that writes to PSR.mfl
	122	*/
	123	#define __local_irq_save(x) \
	124	do { \
	125	ia64_stop(); \
	126	(x) = ia64_getreg(_IA64_REG_PSR); \
	127	ia64_stop(); \
	128	ia64_rsm(IA64_PSR_I); \
	129	} while (0)
	130
	131	#define __local_irq_disable() \
	132	do { \
	133	ia64_stop(); \
	134	ia64_rsm(IA64_PSR_I); \
	135	} while (0)
	136
	137	#define __local_irq_restore(x) ia64_intrin_local_irq_restore((x) & IA64_PSR_I)
	138
	139	#ifdef CONFIG_IA64_DEBUG_IRQ
	140
	141	extern unsigned long last_cli_ip;
	142
	143	# define __save_ip() last_cli_ip = ia64_getreg(_IA64_REG_IP)
	144
	145	# define local_irq_save(x) \
	146	do { \
	147	unsigned long psr; \
	148	\
	149	__local_irq_save(psr); \
	150	if (psr & IA64_PSR_I) \
	151	__save_ip(); \
	152	(x) = psr; \
	153	} while (0)
	154
	155	# define local_irq_disable() do { unsigned long x; local_irq_save(x); } while (0)
	156
	157	# define local_irq_restore(x) \
	158	do { \
	159	unsigned long old_psr, psr = (x); \
	160	\
	161	local_save_flags(old_psr); \
	162	__local_irq_restore(psr); \
	163	if ((old_psr & IA64_PSR_I) && !(psr & IA64_PSR_I)) \
	164	__save_ip(); \
	165	} while (0)
	166
	167	#else /* !CONFIG_IA64_DEBUG_IRQ */
	168	# define local_irq_save(x) __local_irq_save(x)
	169	# define local_irq_disable() __local_irq_disable()
170	# define local_irq_restore(x) __local_irq_restore(x)
171	#endif /* !CONFIG_IA64_DEBUG_IRQ */
172
173	#define local_irq_enable() ({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); })
174	#define local_save_flags(flags) ({ ia64_stop(); (flags) = ia64_getreg(_IA64_REG_PSR); })
175
176	#define irqs_disabled() \
177	({ \
178	unsigned long __ia64_id_flags; \
179	local_save_flags(__ia64_id_flags); \
180	(__ia64_id_flags & IA64_PSR_I) == 0; \
181	})
182
183	#ifdef __KERNEL__
184
1da177e4 LT	185	#ifdef CONFIG_IA32_SUPPORT
	186	# define IS_IA32_PROCESS(regs) (ia64_psr(regs)->is != 0)
	187	#else
	188	# define IS_IA32_PROCESS(regs) 0
	189	struct task_struct;
	190	static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
	191	static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
	192	#endif
	193
	194	/*
	195	* Context switch from one thread to another. If the two threads have
	196	* different address spaces, schedule() has already taken care of
	197	* switching to the new address space by calling switch_mm().
	198	*
	199	* Disabling access to the fph partition and the debug-register
	200	* context switch MUST be done before calling ia64_switch_to() since a
	201	* newly created thread returns directly to
	202	* ia64_ret_from_syscall_clear_r8.
	203	*/
	204	extern struct task_struct ia64_switch_to (void next_task);
	205
	206	struct task_struct;
	207
	208	extern void ia64_save_extra (struct task_struct *task);
	209	extern void ia64_load_extra (struct task_struct *task);
	210
	211	#ifdef CONFIG_PERFMON
	212	DECLARE_PER_CPU(unsigned long, pfm_syst_info);
	213	# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
	214	#else
	215	# define PERFMON_IS_SYSWIDE() (0)
	216	#endif
	217
	218	#define IA64_HAS_EXTRA_STATE(t) \
	219	((t)->thread.flags & (IA64_THREAD_DBG_VALID\|IA64_THREAD_PM_VALID) \
6450578f	220	\|\| IS_IA32_PROCESS(task_pt_regs(t)) \|\| PERFMON_IS_SYSWIDE())
1da177e4 LT	221
	222	#define __switch_to(prev,next,last) do { \
	223	if (IA64_HAS_EXTRA_STATE(prev)) \
	224	ia64_save_extra(prev); \
	225	if (IA64_HAS_EXTRA_STATE(next)) \
	226	ia64_load_extra(next); \
6450578f	227	ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next); \
1da177e4 LT	228	(last) = ia64_switch_to((next)); \
	229	} while (0)
	230
	231	#ifdef CONFIG_SMP
	232	/*
	233	* In the SMP case, we save the fph state when context-switching away from a thread that
	234	* modified fph. This way, when the thread gets scheduled on another CPU, the CPU can
	235	* pick up the state from task->thread.fph, avoiding the complication of having to fetch
	236	* the latest fph state from another CPU. In other words: eager save, lazy restore.
	237	*/
	238	# define switch_to(prev,next,last) do { \
6450578f AV	239	if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) { \
6450578f AV	240	ia64_psr(task_pt_regs(prev))->mfh = 0; \
1da177e4 LT	241	(prev)->thread.flags \|= IA64_THREAD_FPH_VALID; \
	242	__ia64_save_fpu((prev)->thread.fph); \
	243	} \
	244	__switch_to(prev, next, last); \
e08e6c52 BC	245	/* "next" in old context is "current" in new context */ \
	246	if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) && \
	247	(task_cpu(current) != \
	248	task_thread_info(current)->last_cpu))) { \
	249	platform_migrate(current); \
	250	task_thread_info(current)->last_cpu = task_cpu(current); \
	251	} \
1da177e4 LT	252	} while (0)
	253	#else
	254	# define switch_to(prev,next,last) __switch_to(prev, next, last)
	255	#endif
	256
4866cde0	257	#define __ARCH_WANT_UNLOCKED_CTXSW
383f2835	258	#define ARCH_HAS_PREFETCH_SWITCH_STACK
1da177e4 LT	259	#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
	260
	261	void cpu_idle_wait(void);
	262
	263	#define arch_align_stack(x) (x)
	264
cdb04527 AB	265	void default_idle(void);
cdb04527 AB	266
1da177e4 LT	267	#endif /* __KERNEL__ */
	268
	269	#endif /* __ASSEMBLY__ */
	270
	271	#endif /* _ASM_IA64_SYSTEM_H */