[GitHub/mt8127/android_kernel_alcatel_ttab.git] / include / acpi / actbl.h

/******************************************************************************
 *
 * Name: actbl.h - Table data structures defined in ACPI specification
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2005, R. Byron Moore
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#ifndef __ACTBL_H__
#define __ACTBL_H__


/*
 *  Values for description table header signatures
 */
#define RSDP_NAME               "RSDP"
#define RSDP_SIG                "RSD PTR "  /* RSDT Pointer signature */
#define APIC_SIG                "APIC"      /* Multiple APIC Description Table */
#define DSDT_SIG                "DSDT"      /* Differentiated System Description Table */
#define FADT_SIG                "FACP"      /* Fixed ACPI Description Table */
#define FACS_SIG                "FACS"      /* Firmware ACPI Control Structure */
#define PSDT_SIG                "PSDT"      /* Persistent System Description Table */
#define RSDT_SIG                "RSDT"      /* Root System Description Table */
#define XSDT_SIG                "XSDT"      /* Extended  System Description Table */
#define SSDT_SIG                "SSDT"      /* Secondary System Description Table */
#define SBST_SIG                "SBST"      /* Smart Battery Specification Table */
#define SPIC_SIG                "SPIC"      /* IOSAPIC table */
#define BOOT_SIG                "BOOT"      /* Boot table */


#define GL_OWNED                0x02        /* Ownership of global lock is bit 1 */


/*
 * Common table types.  The base code can remain
 * constant if the underlying tables are changed
 */
#define RSDT_DESCRIPTOR         struct rsdt_descriptor_rev2
#define XSDT_DESCRIPTOR         struct xsdt_descriptor_rev2
#define FACS_DESCRIPTOR         struct facs_descriptor_rev2
#define FADT_DESCRIPTOR         struct fadt_descriptor_rev2


#pragma pack(1)

/*
 * ACPI Version-independent tables
 *
 * NOTE: The tables that are specific to ACPI versions (1.0, 2.0, etc.)
 * are in separate files.
 */
struct rsdp_descriptor         /* Root System Descriptor Pointer */
{
	char                            signature[8];           /* ACPI signature, contains "RSD PTR " */
	u8                              checksum;               /* ACPI 1.0 checksum */
	char                            oem_id[6];              /* OEM identification */
	u8                              revision;               /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
	u32                             rsdt_physical_address;  /* 32-bit physical address of the RSDT */
	u32                             length;                 /* XSDT Length in bytes, including header */
	u64                             xsdt_physical_address;  /* 64-bit physical address of the XSDT */
	u8                              extended_checksum;      /* Checksum of entire table (ACPI 2.0) */
	char                            reserved[3];            /* Reserved, must be zero */
};


struct acpi_common_facs          /* Common FACS for internal use */
{
	u32                             *global_lock;
	u64                             *firmware_waking_vector;
	u8                              vector_width;
};


#define ACPI_TABLE_HEADER_DEF   /* ACPI common table header */ \
	char                            signature[4];           /* ASCII table signature */\
	u32                             length;                 /* Length of table in bytes, including this header */\
	u8                              revision;               /* ACPI Specification minor version # */\
	u8                              checksum;               /* To make sum of entire table == 0 */\
	char                            oem_id[6];              /* ASCII OEM identification */\
	char                            oem_table_id[8];        /* ASCII OEM table identification */\
	u32                             oem_revision;           /* OEM revision number */\
	char                            asl_compiler_id [4];    /* ASCII ASL compiler vendor ID */\
	u32                             asl_compiler_revision;  /* ASL compiler version */


struct acpi_table_header         /* ACPI common table header */
{
	ACPI_TABLE_HEADER_DEF
};


/*
 * MADT values and structures
 */

/* Values for MADT PCATCompat */

#define DUAL_PIC                0
#define MULTIPLE_APIC           1

/* Master MADT */

struct multiple_apic_table
{
	ACPI_TABLE_HEADER_DEF                           /* ACPI common table header */
	u32                             local_apic_address;     /* Physical address of local APIC */

	/* Flags (32 bits) */

	u8                              PCATcompat      : 1;    /* 00:    System also has dual 8259s */
	u8                                              : 7;    /* 01-07: Reserved, must be zero */
	u8                              reserved1[3];           /* 08-31: Reserved, must be zero */
};

/* Values for Type in APIC_HEADER_DEF */

#define APIC_PROCESSOR          0
#define APIC_IO                 1
#define APIC_XRUPT_OVERRIDE     2
#define APIC_NMI                3
#define APIC_LOCAL_NMI          4
#define APIC_ADDRESS_OVERRIDE   5
#define APIC_IO_SAPIC           6
#define APIC_LOCAL_SAPIC        7
#define APIC_XRUPT_SOURCE       8
#define APIC_RESERVED           9           /* 9 and greater are reserved */

/*
 * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
 */
#define APIC_HEADER_DEF                     /* Common APIC sub-structure header */\
	u8                              type; \
	u8                              length;

struct apic_header
{
	APIC_HEADER_DEF
};

/* Values for MPS INTI flags */

#define POLARITY_CONFORMS       0
#define POLARITY_ACTIVE_HIGH    1
#define POLARITY_RESERVED       2
#define POLARITY_ACTIVE_LOW     3

#define TRIGGER_CONFORMS        0
#define TRIGGER_EDGE            1
#define TRIGGER_RESERVED        2
#define TRIGGER_LEVEL           3

/* Common flag definitions (16 bits each) */

#define MPS_INTI_FLAGS \
	u8                              polarity        : 2;    /* 00-01: Polarity of APIC I/O input signals */\
	u8                              trigger_mode    : 2;    /* 02-03: Trigger mode of APIC input signals */\
	u8                                              : 4;    /* 04-07: Reserved, must be zero */\
	u8                              reserved1;              /* 08-15: Reserved, must be zero */

#define LOCAL_APIC_FLAGS \
	u8                              processor_enabled: 1;   /* 00:    Processor is usable if set */\
	u8                                              : 7;    /* 01-07: Reserved, must be zero */\
	u8                              reserved2;              /* 08-15: Reserved, must be zero */

/* Sub-structures for MADT */

struct madt_processor_apic
{
	APIC_HEADER_DEF
	u8                              processor_id;           /* ACPI processor id */
	u8                              local_apic_id;          /* Processor's local APIC id */
	LOCAL_APIC_FLAGS
};

struct madt_io_apic
{
	APIC_HEADER_DEF
	u8                              io_apic_id;             /* I/O APIC ID */
	u8                              reserved;               /* Reserved - must be zero */
	u32                             address;                /* APIC physical address */
	u32                             interrupt;              /* Global system interrupt where INTI
			  * lines start */
};

struct madt_interrupt_override
{
	APIC_HEADER_DEF
	u8                              bus;                    /* 0 - ISA */
	u8                              source;                 /* Interrupt source (IRQ) */
	u32                             interrupt;              /* Global system interrupt */
	MPS_INTI_FLAGS
};

struct madt_nmi_source
{
	APIC_HEADER_DEF
	MPS_INTI_FLAGS
	u32                             interrupt;              /* Global system interrupt */
};

struct madt_local_apic_nmi
{
	APIC_HEADER_DEF
	u8                              processor_id;           /* ACPI processor id */
	MPS_INTI_FLAGS
	u8                              lint;                   /* LINTn to which NMI is connected */
};

struct madt_address_override
{
	APIC_HEADER_DEF
	u16                             reserved;               /* Reserved, must be zero */
	u64                             address;                /* APIC physical address */
};

struct madt_io_sapic
{
	APIC_HEADER_DEF
	u8                              io_sapic_id;            /* I/O SAPIC ID */
	u8                              reserved;               /* Reserved, must be zero */
	u32                             interrupt_base;         /* Glocal interrupt for SAPIC start */
	u64                             address;                /* SAPIC physical address */
};

struct madt_local_sapic
{
	APIC_HEADER_DEF
	u8                              processor_id;           /* ACPI processor id */
	u8                              local_sapic_id;         /* SAPIC ID */
	u8                              local_sapic_eid;        /* SAPIC EID */
	u8                              reserved[3];            /* Reserved, must be zero */
	LOCAL_APIC_FLAGS
	u32                             processor_uID;          /* Numeric UID - ACPI 3.0 */
	char                            processor_uIDstring[1]; /* String UID  - ACPI 3.0 */
};

struct madt_interrupt_source
{
	APIC_HEADER_DEF
	MPS_INTI_FLAGS
	u8                              interrupt_type;         /* 1=PMI, 2=INIT, 3=corrected */
	u8                              processor_id;           /* Processor ID */
	u8                              processor_eid;          /* Processor EID */
	u8                              io_sapic_vector;        /* Vector value for PMI interrupts */
	u32                             interrupt;              /* Global system interrupt */
	u32                             flags;                  /* Interrupt Source Flags */
};


/*
 * Smart Battery
 */
struct smart_battery_table
{
	ACPI_TABLE_HEADER_DEF
	u32                             warning_level;
	u32                             low_level;
	u32                             critical_level;
};


#pragma pack()


/*
 * ACPI Table information.  We save the table address, length,
 * and type of memory allocation (mapped or allocated) for each
 * table for 1) when we exit, and 2) if a new table is installed
 */
#define ACPI_MEM_NOT_ALLOCATED  0
#define ACPI_MEM_ALLOCATED      1
#define ACPI_MEM_MAPPED         2

/* Definitions for the Flags bitfield member of struct acpi_table_support */

#define ACPI_TABLE_SINGLE       0x00
#define ACPI_TABLE_MULTIPLE     0x01
#define ACPI_TABLE_EXECUTABLE   0x02

#define ACPI_TABLE_ROOT         0x00
#define ACPI_TABLE_PRIMARY      0x10
#define ACPI_TABLE_SECONDARY    0x20
#define ACPI_TABLE_ALL          0x30
#define ACPI_TABLE_TYPE_MASK    0x30

/* Data about each known table type */

struct acpi_table_support
{
	char                            *name;
	char                            *signature;
	void                            **global_ptr;
	u8                              sig_length;
	u8                              flags;
};


/*
 * Get the ACPI version-specific tables
 */
#include "actbl1.h"   /* Acpi 1.0 table definitions */
#include "actbl2.h"   /* Acpi 2.0 table definitions */

extern u8 acpi_fadt_is_v1; /* is set to 1 if FADT is revision 1,
			    * needed for certain workarounds */

#pragma pack(1)
/*
 * High performance timer
 */
struct hpet_table
{
	ACPI_TABLE_HEADER_DEF
	u32                             hardware_id;
	struct acpi_generic_address     base_address;
	u8                              hpet_number;
	u16                             clock_tick;
	u8                              attributes;
};

#pragma pack()

#endif /* __ACTBL_H__ */
Commit	Line	Data
1da177e4 LT	1	/******************************************************************************
	2	*
	3	* Name: actbl.h - Table data structures defined in ACPI specification
	4	*
	5	*****************************************************************************/
	6
	7	/*
	8	* Copyright (C) 2000 - 2005, R. Byron Moore
	9	* All rights reserved.
	10	*
	11	* Redistribution and use in source and binary forms, with or without
	12	* modification, are permitted provided that the following conditions
	13	* are met:
	14	* 1. Redistributions of source code must retain the above copyright
	15	* notice, this list of conditions, and the following disclaimer,
	16	* without modification.
	17	* 2. Redistributions in binary form must reproduce at minimum a disclaimer
	18	* substantially similar to the "NO WARRANTY" disclaimer below
	19	* ("Disclaimer") and any redistribution must be conditioned upon
	20	* including a substantially similar Disclaimer requirement for further
	21	* binary redistribution.
	22	* 3. Neither the names of the above-listed copyright holders nor the names
	23	* of any contributors may be used to endorse or promote products derived
	24	* from this software without specific prior written permission.
	25	*
	26	* Alternatively, this software may be distributed under the terms of the
	27	* GNU General Public License ("GPL") version 2 as published by the Free
	28	* Software Foundation.
	29	*
	30	* NO WARRANTY
	31	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	32	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	33	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
	34	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	35	* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	36	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
	37	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	38	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
	39	* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
	40	* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	41	* POSSIBILITY OF SUCH DAMAGES.
	42	*/
	43
	44	#ifndef __ACTBL_H__
	45	#define __ACTBL_H__
	46
	47
	48	/*
	49	* Values for description table header signatures
	50	*/
	51	#define RSDP_NAME "RSDP"
	52	#define RSDP_SIG "RSD PTR " /* RSDT Pointer signature */
	53	#define APIC_SIG "APIC" /* Multiple APIC Description Table */
	54	#define DSDT_SIG "DSDT" /* Differentiated System Description Table */
	55	#define FADT_SIG "FACP" /* Fixed ACPI Description Table */
	56	#define FACS_SIG "FACS" /* Firmware ACPI Control Structure */
	57	#define PSDT_SIG "PSDT" /* Persistent System Description Table */
	58	#define RSDT_SIG "RSDT" /* Root System Description Table */
	59	#define XSDT_SIG "XSDT" /* Extended System Description Table */
	60	#define SSDT_SIG "SSDT" /* Secondary System Description Table */
	61	#define SBST_SIG "SBST" /* Smart Battery Specification Table */
	62	#define SPIC_SIG "SPIC" /* IOSAPIC table */
	63	#define BOOT_SIG "BOOT" /* Boot table */
	64
65
66	#define GL_OWNED 0x02 /* Ownership of global lock is bit 1 */
67
68
69	/*
70	* Common table types. The base code can remain
71	* constant if the underlying tables are changed
72	*/
73	#define RSDT_DESCRIPTOR struct rsdt_descriptor_rev2
74	#define XSDT_DESCRIPTOR struct xsdt_descriptor_rev2
75	#define FACS_DESCRIPTOR struct facs_descriptor_rev2
76	#define FADT_DESCRIPTOR struct fadt_descriptor_rev2
77
78
79	#pragma pack(1)
80
81	/*
82	* ACPI Version-independent tables
83	*
84	* NOTE: The tables that are specific to ACPI versions (1.0, 2.0, etc.)
85	* are in separate files.
86	*/
87	struct rsdp_descriptor /* Root System Descriptor Pointer */
88	{
f9f4601f RM	89	char signature[8]; /* ACPI signature, contains "RSD PTR " */
	90	u8 checksum; /* ACPI 1.0 checksum */
	91	char oem_id[6]; /* OEM identification */
	92	u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
	93	u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */
	94	u32 length; /* XSDT Length in bytes, including header */
	95	u64 xsdt_physical_address; /* 64-bit physical address of the XSDT */
	96	u8 extended_checksum; /* Checksum of entire table (ACPI 2.0) */
	97	char reserved[3]; /* Reserved, must be zero */
1da177e4 LT	98	};
	99
	100
	101	struct acpi_common_facs /* Common FACS for internal use */
	102	{
	103	u32 *global_lock;
	104	u64 *firmware_waking_vector;
	105	u8 vector_width;
	106	};
	107
	108
	109	#define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \
f9f4601f RM	110	char signature[4]; /* ASCII table signature */\
f9f4601f RM	111	u32 length; /* Length of table in bytes, including this header */\
1da177e4 LT	112	u8 revision; /* ACPI Specification minor version # */\
1da177e4 LT	113	u8 checksum; /* To make sum of entire table == 0 */\
f9f4601f RM	114	char oem_id[6]; /* ASCII OEM identification */\
f9f4601f RM	115	char oem_table_id[8]; /* ASCII OEM table identification */\
1da177e4	116	u32 oem_revision; /* OEM revision number */\
f9f4601f RM	117	char asl_compiler_id [4]; /* ASCII ASL compiler vendor ID */\
f9f4601f RM	118	u32 asl_compiler_revision; /* ASL compiler version */
1da177e4 LT	119
	120
	121	struct acpi_table_header /* ACPI common table header */
	122	{
	123	ACPI_TABLE_HEADER_DEF
	124	};
	125
	126
	127	/*
	128	* MADT values and structures
	129	*/
	130
	131	/* Values for MADT PCATCompat */
	132
	133	#define DUAL_PIC 0
	134	#define MULTIPLE_APIC 1
	135
1da177e4 LT	136	/* Master MADT */
	137
	138	struct multiple_apic_table
	139	{
	140	ACPI_TABLE_HEADER_DEF /* ACPI common table header */
	141	u32 local_apic_address; /* Physical address of local APIC */
f9f4601f RM	142
	143	/* Flags (32 bits) */
	144
	145	u8 PCATcompat : 1; /* 00: System also has dual 8259s */
	146	u8 : 7; /* 01-07: Reserved, must be zero */
	147	u8 reserved1[3]; /* 08-31: Reserved, must be zero */
1da177e4 LT	148	};
1da177e4 LT	149
1da177e4 LT	150	/* Values for Type in APIC_HEADER_DEF */
	151
	152	#define APIC_PROCESSOR 0
	153	#define APIC_IO 1
	154	#define APIC_XRUPT_OVERRIDE 2
	155	#define APIC_NMI 3
	156	#define APIC_LOCAL_NMI 4
	157	#define APIC_ADDRESS_OVERRIDE 5
	158	#define APIC_IO_SAPIC 6
	159	#define APIC_LOCAL_SAPIC 7
	160	#define APIC_XRUPT_SOURCE 8
	161	#define APIC_RESERVED 9 /* 9 and greater are reserved */
	162
	163	/*
	164	* MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
	165	*/
	166	#define APIC_HEADER_DEF /* Common APIC sub-structure header */\
	167	u8 type; \
	168	u8 length;
	169
	170	struct apic_header
	171	{
	172	APIC_HEADER_DEF
	173	};
	174
	175	/* Values for MPS INTI flags */
	176
	177	#define POLARITY_CONFORMS 0
	178	#define POLARITY_ACTIVE_HIGH 1
	179	#define POLARITY_RESERVED 2
	180	#define POLARITY_ACTIVE_LOW 3
	181
	182	#define TRIGGER_CONFORMS 0
	183	#define TRIGGER_EDGE 1
	184	#define TRIGGER_RESERVED 2
	185	#define TRIGGER_LEVEL 3
	186
f9f4601f	187	/* Common flag definitions (16 bits each) */
1da177e4 LT	188
1da177e4 LT	189	#define MPS_INTI_FLAGS \
f9f4601f RM	190	u8 polarity : 2; /* 00-01: Polarity of APIC I/O input signals */\
	191	u8 trigger_mode : 2; /* 02-03: Trigger mode of APIC input signals */\
	192	u8 : 4; /* 04-07: Reserved, must be zero */\
	193	u8 reserved1; /* 08-15: Reserved, must be zero */
1da177e4 LT	194
1da177e4 LT	195	#define LOCAL_APIC_FLAGS \
f9f4601f RM	196	u8 processor_enabled: 1; /* 00: Processor is usable if set */\
	197	u8 : 7; /* 01-07: Reserved, must be zero */\
	198	u8 reserved2; /* 08-15: Reserved, must be zero */
1da177e4 LT	199
	200	/* Sub-structures for MADT */
	201
	202	struct madt_processor_apic
	203	{
	204	APIC_HEADER_DEF
	205	u8 processor_id; /* ACPI processor id */
	206	u8 local_apic_id; /* Processor's local APIC id */
	207	LOCAL_APIC_FLAGS
	208	};
	209
	210	struct madt_io_apic
	211	{
	212	APIC_HEADER_DEF
	213	u8 io_apic_id; /* I/O APIC ID */
	214	u8 reserved; /* Reserved - must be zero */
	215	u32 address; /* APIC physical address */
	216	u32 interrupt; /* Global system interrupt where INTI
	217	* lines start */
	218	};
	219
	220	struct madt_interrupt_override
	221	{
	222	APIC_HEADER_DEF
	223	u8 bus; /* 0 - ISA */
	224	u8 source; /* Interrupt source (IRQ) */
	225	u32 interrupt; /* Global system interrupt */
	226	MPS_INTI_FLAGS
	227	};
	228
	229	struct madt_nmi_source
	230	{
	231	APIC_HEADER_DEF
	232	MPS_INTI_FLAGS
	233	u32 interrupt; /* Global system interrupt */
	234	};
	235
	236	struct madt_local_apic_nmi
	237	{
	238	APIC_HEADER_DEF
	239	u8 processor_id; /* ACPI processor id */
	240	MPS_INTI_FLAGS
	241	u8 lint; /* LINTn to which NMI is connected */
	242	};
	243
	244	struct madt_address_override
	245	{
	246	APIC_HEADER_DEF
f9f4601f	247	u16 reserved; /* Reserved, must be zero */
1da177e4 LT	248	u64 address; /* APIC physical address */
	249	};
	250
	251	struct madt_io_sapic
	252	{
	253	APIC_HEADER_DEF
	254	u8 io_sapic_id; /* I/O SAPIC ID */
f9f4601f	255	u8 reserved; /* Reserved, must be zero */
1da177e4 LT	256	u32 interrupt_base; /* Glocal interrupt for SAPIC start */
	257	u64 address; /* SAPIC physical address */
	258	};
	259
	260	struct madt_local_sapic
	261	{
	262	APIC_HEADER_DEF
	263	u8 processor_id; /* ACPI processor id */
	264	u8 local_sapic_id; /* SAPIC ID */
	265	u8 local_sapic_eid; /* SAPIC EID */
f9f4601f	266	u8 reserved[3]; /* Reserved, must be zero */
1da177e4 LT	267	LOCAL_APIC_FLAGS
	268	u32 processor_uID; /* Numeric UID - ACPI 3.0 */
	269	char processor_uIDstring[1]; /* String UID - ACPI 3.0 */
	270	};
	271
	272	struct madt_interrupt_source
	273	{
	274	APIC_HEADER_DEF
	275	MPS_INTI_FLAGS
	276	u8 interrupt_type; /* 1=PMI, 2=INIT, 3=corrected */
	277	u8 processor_id; /* Processor ID */
	278	u8 processor_eid; /* Processor EID */
	279	u8 io_sapic_vector; /* Vector value for PMI interrupts */
	280	u32 interrupt; /* Global system interrupt */
	281	u32 flags; /* Interrupt Source Flags */
	282	};
	283
	284
	285	/*
	286	* Smart Battery
	287	*/
	288	struct smart_battery_table
	289	{
	290	ACPI_TABLE_HEADER_DEF
	291	u32 warning_level;
	292	u32 low_level;
	293	u32 critical_level;
	294	};
	295
	296
	297	#pragma pack()
	298
	299
	300	/*
	301	* ACPI Table information. We save the table address, length,
	302	* and type of memory allocation (mapped or allocated) for each
	303	* table for 1) when we exit, and 2) if a new table is installed
	304	*/
	305	#define ACPI_MEM_NOT_ALLOCATED 0
	306	#define ACPI_MEM_ALLOCATED 1
	307	#define ACPI_MEM_MAPPED 2
	308
	309	/* Definitions for the Flags bitfield member of struct acpi_table_support */
	310
	311	#define ACPI_TABLE_SINGLE 0x00
	312	#define ACPI_TABLE_MULTIPLE 0x01
	313	#define ACPI_TABLE_EXECUTABLE 0x02
	314
	315	#define ACPI_TABLE_ROOT 0x00
	316	#define ACPI_TABLE_PRIMARY 0x10
	317	#define ACPI_TABLE_SECONDARY 0x20
	318	#define ACPI_TABLE_ALL 0x30
	319	#define ACPI_TABLE_TYPE_MASK 0x30
	320
	321	/* Data about each known table type */
	322
	323	struct acpi_table_support
	324	{
	325	char *name;
	326	char *signature;
	327	void **global_ptr;
	328	u8 sig_length;
	329	u8 flags;
	330	};
331
332
333	/*
334	* Get the ACPI version-specific tables
335	*/
336	#include "actbl1.h" /* Acpi 1.0 table definitions */
337	#include "actbl2.h" /* Acpi 2.0 table definitions */
338
339	extern u8 acpi_fadt_is_v1; /* is set to 1 if FADT is revision 1,
340	* needed for certain workarounds */
341
342	#pragma pack(1)
343	/*
344	* High performance timer
345	*/
346	struct hpet_table
347	{
348	ACPI_TABLE_HEADER_DEF
349	u32 hardware_id;
350	struct acpi_generic_address base_address;
351	u8 hpet_number;
352	u16 clock_tick;
353	u8 attributes;
354	};
355
356	#pragma pack()
357
358	#endif /* __ACTBL_H__ */