Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Watchdog device configuration | |
3 | # | |
4 | ||
261259b2 | 5 | menuconfig WATCHDOG |
1da177e4 LT |
6 | bool "Watchdog Timer Support" |
7 | ---help--- | |
8 | If you say Y here (and to one of the following options) and create a | |
9 | character special file /dev/watchdog with major number 10 and minor | |
10 | number 130 using mknod ("man mknod"), you will get a watchdog, i.e.: | |
11 | subsequently opening the file and then failing to write to it for | |
12 | longer than 1 minute will result in rebooting the machine. This | |
13 | could be useful for a networked machine that needs to come back | |
e0845bf4 | 14 | on-line as fast as possible after a lock-up. There's both a watchdog |
1da177e4 LT |
15 | implementation entirely in software (which can sometimes fail to |
16 | reboot the machine) and a driver for hardware watchdog boards, which | |
17 | are more robust and can also keep track of the temperature inside | |
e403149c DH |
18 | your computer. For details, read |
19 | <file:Documentation/watchdog/watchdog-api.txt> in the kernel source. | |
1da177e4 LT |
20 | |
21 | The watchdog is usually used together with the watchdog daemon | |
22 | which is available from | |
23 | <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can | |
24 | also monitor NFS connections and can reboot the machine when the process | |
25 | table is full. | |
26 | ||
27 | If unsure, say N. | |
28 | ||
261259b2 JE |
29 | if WATCHDOG |
30 | ||
43316044 WVS |
31 | config WATCHDOG_CORE |
32 | bool "WatchDog Timer Driver Core" | |
33 | ---help--- | |
34 | Say Y here if you want to use the new watchdog timer driver core. | |
35 | This driver provides a framework for all watchdog timer drivers | |
36 | and gives them the /dev/watchdog interface (and later also the | |
37 | sysfs interface). | |
38 | ||
1da177e4 LT |
39 | config WATCHDOG_NOWAYOUT |
40 | bool "Disable watchdog shutdown on close" | |
1da177e4 LT |
41 | help |
42 | The default watchdog behaviour (which you get if you say N here) is | |
43 | to stop the timer if the process managing it closes the file | |
44 | /dev/watchdog. It's always remotely possible that this process might | |
45 | get killed. If you say Y here, the watchdog cannot be stopped once | |
46 | it has been started. | |
47 | ||
48 | # | |
49 | # General Watchdog drivers | |
50 | # | |
51 | ||
52 | comment "Watchdog Device Drivers" | |
1da177e4 | 53 | |
2621e2a1 | 54 | # Architecture Independent |
1da177e4 LT |
55 | |
56 | config SOFT_WATCHDOG | |
57 | tristate "Software watchdog" | |
a5132caf | 58 | select WATCHDOG_CORE |
1da177e4 LT |
59 | help |
60 | A software monitoring watchdog. This will fail to reboot your system | |
61 | from some situations that the hardware watchdog will recover | |
62 | from. Equally it's a lot cheaper to install. | |
63 | ||
64 | To compile this driver as a module, choose M here: the | |
65 | module will be called softdog. | |
66 | ||
664a0d78 AJ |
67 | config DA9052_WATCHDOG |
68 | tristate "Dialog DA9052 Watchdog" | |
69 | depends on PMIC_DA9052 | |
70 | select WATCHDOG_CORE | |
71 | help | |
72 | Support for the watchdog in the DA9052 PMIC. Watchdog trigger | |
73 | cause system reset. | |
74 | ||
75 | Say Y here to include support for the DA9052 watchdog. | |
76 | Alternatively say M to compile the driver as a module, | |
77 | which will be called da9052_wdt. | |
78 | ||
312b00e1 AJ |
79 | config DA9055_WATCHDOG |
80 | tristate "Dialog Semiconductor DA9055 Watchdog" | |
81 | depends on MFD_DA9055 | |
12a5c05c | 82 | select WATCHDOG_CORE |
312b00e1 AJ |
83 | help |
84 | If you say yes here you get support for watchdog on the Dialog | |
85 | Semiconductor DA9055 PMIC. | |
86 | ||
87 | This driver can also be built as a module. If so, the module | |
88 | will be called da9055_wdt. | |
89 | ||
502a0106 MB |
90 | config WM831X_WATCHDOG |
91 | tristate "WM831x watchdog" | |
92 | depends on MFD_WM831X | |
00411ee9 | 93 | select WATCHDOG_CORE |
502a0106 MB |
94 | help |
95 | Support for the watchdog in the WM831x AudioPlus PMICs. When | |
96 | the watchdog triggers the system will be reset. | |
97 | ||
006948ba MB |
98 | config WM8350_WATCHDOG |
99 | tristate "WM8350 watchdog" | |
100 | depends on MFD_WM8350 | |
2e51d90f | 101 | select WATCHDOG_CORE |
006948ba MB |
102 | help |
103 | Support for the watchdog in the WM8350 AudioPlus PMIC. When | |
104 | the watchdog triggers the system will be reset. | |
105 | ||
c0e962f9 WVS |
106 | # ALPHA Architecture |
107 | ||
1da177e4 LT |
108 | # ARM Architecture |
109 | ||
4a370278 VK |
110 | config ARM_SP805_WATCHDOG |
111 | tristate "ARM SP805 Watchdog" | |
41e9f3f7 | 112 | depends on ARM && ARM_AMBA |
4a516539 | 113 | select WATCHDOG_CORE |
4a370278 VK |
114 | help |
115 | ARM Primecell SP805 Watchdog timer. This will reboot your system when | |
116 | the timeout is reached. | |
117 | ||
bdcff345 | 118 | config AT91RM9200_WATCHDOG |
853807fb | 119 | tristate "AT91RM9200 watchdog" |
09549cd0 | 120 | depends on ARCH_AT91RM9200 |
853807fb AV |
121 | help |
122 | Watchdog timer embedded into AT91RM9200 chips. This will reboot your | |
123 | system when the timeout is reached. | |
124 | ||
e6bb42e3 | 125 | config AT91SAM9X_WATCHDOG |
f0e625c1 AV |
126 | tristate "AT91SAM9X / AT91CAP9 watchdog" |
127 | depends on ARCH_AT91 && !ARCH_AT91RM9200 | |
490ac7af | 128 | select WATCHDOG_CORE |
e6bb42e3 | 129 | help |
f0e625c1 AV |
130 | Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will |
131 | reboot your system when the timeout is reached. | |
e6bb42e3 | 132 | |
1da177e4 LT |
133 | config 21285_WATCHDOG |
134 | tristate "DC21285 watchdog" | |
261259b2 | 135 | depends on FOOTBRIDGE |
1da177e4 | 136 | help |
e0845bf4 | 137 | The Intel Footbridge chip contains a built-in watchdog circuit. Say Y |
1da177e4 LT |
138 | here if you wish to use this. Alternatively say M to compile the |
139 | driver as a module, which will be called wdt285. | |
140 | ||
141 | This driver does not work on all machines. In particular, early CATS | |
142 | boards have hardware problems that will cause the machine to simply | |
143 | lock up if the watchdog fires. | |
144 | ||
145 | "If in doubt, leave it out" - say N. | |
146 | ||
147 | config 977_WATCHDOG | |
148 | tristate "NetWinder WB83C977 watchdog" | |
261259b2 | 149 | depends on FOOTBRIDGE && ARCH_NETWINDER |
1da177e4 LT |
150 | help |
151 | Say Y here to include support for the WB977 watchdog included in | |
152 | NetWinder machines. Alternatively say M to compile the driver as | |
153 | a module, which will be called wdt977. | |
154 | ||
155 | Not sure? It's safe to say N. | |
156 | ||
157 | config IXP4XX_WATCHDOG | |
158 | tristate "IXP4xx Watchdog" | |
261259b2 | 159 | depends on ARCH_IXP4XX |
1da177e4 LT |
160 | help |
161 | Say Y here if to include support for the watchdog timer | |
162 | in the Intel IXP4xx network processors. This driver can | |
163 | be built as a module by choosing M. The module will | |
164 | be called ixp4xx_wdt. | |
165 | ||
166 | Note: The internal IXP4xx watchdog does a soft CPU reset | |
167 | which doesn't reset any peripherals. There are circumstances | |
168 | where the watchdog will fail to reset the board correctly | |
169 | (e.g., if the boot ROM is in an unreadable state). | |
170 | ||
171 | Say N if you are unsure. | |
172 | ||
ccb8f430 AV |
173 | config KS8695_WATCHDOG |
174 | tristate "KS8695 watchdog" | |
175 | depends on ARCH_KS8695 | |
176 | help | |
177 | Watchdog timer embedded into KS8695 processor. This will reboot your | |
178 | system when the timeout is reached. | |
179 | ||
8740f71d BG |
180 | config HAVE_S3C2410_WATCHDOG |
181 | bool | |
182 | help | |
183 | This will include watchdog timer support for Samsung SoCs. If | |
184 | you want to include watchdog support for any machine, kindly | |
185 | select this in the respective mach-XXXX/Kconfig file. | |
186 | ||
1da177e4 LT |
187 | config S3C2410_WATCHDOG |
188 | tristate "S3C2410 Watchdog" | |
b130d5c2 | 189 | depends on HAVE_S3C2410_WATCHDOG |
25dc46e3 | 190 | select WATCHDOG_CORE |
1da177e4 | 191 | help |
8740f71d BG |
192 | Watchdog timer block in the Samsung SoCs. This will reboot |
193 | the system when the timer expires with the watchdog enabled. | |
1da177e4 LT |
194 | |
195 | The driver is limited by the speed of the system's PCLK | |
2621e2a1 | 196 | signal, so with reasonably fast systems (PCLK around 50-66MHz) |
1da177e4 LT |
197 | then watchdog intervals of over approximately 20seconds are |
198 | unavailable. | |
199 | ||
200 | The driver can be built as a module by choosing M, and will | |
201 | be called s3c2410_wdt | |
202 | ||
203 | config SA1100_WATCHDOG | |
204 | tristate "SA1100/PXA2xx watchdog" | |
261259b2 | 205 | depends on ARCH_SA1100 || ARCH_PXA |
1da177e4 LT |
206 | help |
207 | Watchdog timer embedded into SA11x0 and PXA2xx chips. This will | |
208 | reboot your system when timeout is reached. | |
209 | ||
210 | NOTE: once enabled, this timer cannot be disabled. | |
211 | ||
212 | To compile this driver as a module, choose M here: the | |
213 | module will be called sa1100_wdt. | |
214 | ||
c9353ae1 JI |
215 | config DW_WATCHDOG |
216 | tristate "Synopsys DesignWare watchdog" | |
217 | depends on ARM && HAVE_CLK | |
218 | help | |
219 | Say Y here if to include support for the Synopsys DesignWare | |
220 | watchdog timer found in many ARM chips. | |
221 | To compile this driver as a module, choose M here: the | |
222 | module will be called dw_wdt. | |
223 | ||
b9d36b85 RK |
224 | config MPCORE_WATCHDOG |
225 | tristate "MPcore watchdog" | |
98af0570 | 226 | depends on HAVE_ARM_TWD |
b9d36b85 RK |
227 | help |
228 | Watchdog timer embedded into the MPcore system. | |
229 | ||
230 | To compile this driver as a module, choose M here: the | |
231 | module will be called mpcore_wdt. | |
232 | ||
f52ac8fe AZ |
233 | config EP93XX_WATCHDOG |
234 | tristate "EP93xx Watchdog" | |
261259b2 | 235 | depends on ARCH_EP93XX |
e12a679d | 236 | select WATCHDOG_CORE |
f52ac8fe AZ |
237 | help |
238 | Say Y here if to include support for the watchdog timer | |
239 | embedded in the Cirrus Logic EP93xx family of devices. | |
240 | ||
241 | To compile this driver as a module, choose M here: the | |
242 | module will be called ep93xx_wdt. | |
243 | ||
7768a13c KS |
244 | config OMAP_WATCHDOG |
245 | tristate "OMAP Watchdog" | |
77165a48 | 246 | depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS |
67c0f554 | 247 | select WATCHDOG_CORE |
7768a13c | 248 | help |
77165a48 SS |
249 | Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog. Say 'Y' |
250 | here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer. | |
7768a13c | 251 | |
9325fa36 | 252 | config PNX4008_WATCHDOG |
d684f05f RS |
253 | tristate "LPC32XX Watchdog" |
254 | depends on ARCH_LPC32XX | |
6b1e8386 | 255 | select WATCHDOG_CORE |
9325fa36 VW |
256 | help |
257 | Say Y here if to include support for the watchdog timer | |
d684f05f | 258 | in the LPC32XX processor. |
9325fa36 VW |
259 | This driver can be built as a module by choosing M. The module |
260 | will be called pnx4008_wdt. | |
261 | ||
262 | Say N if you are unsure. | |
263 | ||
70c14ff0 DW |
264 | config IOP_WATCHDOG |
265 | tristate "IOP Watchdog" | |
c0e962f9 | 266 | depends on PLAT_IOP |
70c14ff0 DW |
267 | select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X) |
268 | help | |
269 | Say Y here if to include support for the watchdog timer | |
270 | in the Intel IOP3XX & IOP13XX I/O Processors. This driver can | |
271 | be built as a module by choosing M. The module will | |
272 | be called iop_wdt. | |
273 | ||
274 | Note: The IOP13XX watchdog does an Internal Bus Reset which will | |
275 | affect both cores and the peripherals of the IOP. The ATU-X | |
276 | and/or ATUe configuration registers will remain intact, but if | |
277 | operating as an Root Complex and/or Central Resource, the PCI-X | |
278 | and/or PCIe busses will also be reset. THIS IS A VERY BIG HAMMER. | |
279 | ||
7d831bf5 VB |
280 | config DAVINCI_WATCHDOG |
281 | tristate "DaVinci watchdog" | |
c0e962f9 | 282 | depends on ARCH_DAVINCI |
7d831bf5 VB |
283 | help |
284 | Say Y here if to include support for the watchdog timer | |
285 | in the DaVinci DM644x/DM646x processors. | |
286 | To compile this driver as a module, choose M here: the | |
287 | module will be called davinci_wdt. | |
288 | ||
289 | NOTE: once enabled, this timer cannot be disabled. | |
290 | Say N if you are unsure. | |
291 | ||
3b937a7d NP |
292 | config ORION_WATCHDOG |
293 | tristate "Orion watchdog" | |
054bd3f0 | 294 | depends on ARCH_ORION5X || ARCH_KIRKWOOD |
0dd6e484 | 295 | select WATCHDOG_CORE |
22ac9232 SB |
296 | help |
297 | Say Y here if to include support for the watchdog timer | |
3b937a7d | 298 | in the Marvell Orion5x and Kirkwood ARM SoCs. |
22ac9232 | 299 | To compile this driver as a module, choose M here: the |
3b937a7d | 300 | module will be called orion_wdt. |
22ac9232 | 301 | |
01480701 LW |
302 | config COH901327_WATCHDOG |
303 | bool "ST-Ericsson COH 901 327 watchdog" | |
304 | depends on ARCH_U300 | |
305 | default y if MACH_U300 | |
15b25701 | 306 | select WATCHDOG_CORE |
01480701 LW |
307 | help |
308 | Say Y here to include Watchdog timer support for the | |
309 | watchdog embedded into the ST-Ericsson U300 series platforms. | |
310 | This watchdog is used to reset the system and thus cannot be | |
311 | compiled as a module. | |
312 | ||
80e45b1e TK |
313 | config TWL4030_WATCHDOG |
314 | tristate "TWL4030 Watchdog" | |
315 | depends on TWL4030_CORE | |
b2c4e4b2 | 316 | select WATCHDOG_CORE |
80e45b1e TK |
317 | help |
318 | Support for TI TWL4030 watchdog. Say 'Y' here to enable the | |
319 | watchdog timer support for TWL4030 chips. | |
320 | ||
de6303ab WS |
321 | config STMP3XXX_RTC_WATCHDOG |
322 | tristate "Freescale STMP3XXX & i.MX23/28 watchdog" | |
323 | depends on RTC_DRV_STMP | |
324 | select WATCHDOG_CORE | |
325 | help | |
326 | Say Y here to include support for the watchdog timer inside | |
327 | the RTC for the STMP37XX/378X or i.MX23/28 SoC. | |
328 | To compile this driver as a module, choose M here: the | |
329 | module will be called stmp3xxx_rtc_wdt. | |
330 | ||
0400e313 WZ |
331 | config NUC900_WATCHDOG |
332 | tristate "Nuvoton NUC900 watchdog" | |
333 | depends on ARCH_W90X900 | |
334 | help | |
335 | Say Y here if to include support for the watchdog timer | |
336 | for the Nuvoton NUC900 series SoCs. | |
337 | To compile this driver as a module, choose M here: the | |
338 | module will be called nuc900_wdt. | |
339 | ||
c90bf2aa MW |
340 | config TS72XX_WATCHDOG |
341 | tristate "TS-72XX SBC Watchdog" | |
342 | depends on MACH_TS72XX | |
343 | help | |
344 | Technologic Systems TS-7200, TS-7250 and TS-7260 boards have | |
345 | watchdog timer implemented in a external CPLD chip. Say Y here | |
346 | if you want to support for the watchdog timer on TS-72XX boards. | |
347 | ||
348 | To compile this driver as a module, choose M here: the | |
349 | module will be called ts72xx_wdt. | |
350 | ||
5e803716 MZ |
351 | config MAX63XX_WATCHDOG |
352 | tristate "Max63xx watchdog" | |
aebaec97 | 353 | depends on ARM && HAS_IOMEM |
a0f36833 | 354 | select WATCHDOG_CORE |
5e803716 MZ |
355 | help |
356 | Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. | |
357 | ||
bb2fd8a8 WS |
358 | config IMX2_WDT |
359 | tristate "IMX2+ Watchdog" | |
2d076bb8 | 360 | depends on ARCH_MXC |
bb2fd8a8 WS |
361 | help |
362 | This is the driver for the hardware watchdog | |
363 | on the Freescale IMX2 and later processors. | |
364 | If you have one of these processors and wish to have | |
365 | watchdog support enabled, say Y, otherwise say N. | |
366 | ||
367 | To compile this driver as a module, choose M here: the | |
368 | module will be called imx2_wdt. | |
369 | ||
f0e5bd41 FB |
370 | config UX500_WATCHDOG |
371 | tristate "ST-Ericsson Ux500 watchdog" | |
372 | depends on MFD_DB8500_PRCMU | |
373 | select WATCHDOG_CORE | |
374 | default y | |
375 | help | |
376 | Say Y here to include Watchdog timer support for the watchdog | |
377 | existing in the prcmu of ST-Ericsson Ux500 series platforms. | |
378 | ||
379 | To compile this driver as a module, choose M here: the | |
380 | module will be called ux500_wdt. | |
381 | ||
3d3a6d18 AK |
382 | config RETU_WATCHDOG |
383 | tristate "Retu watchdog" | |
384 | depends on MFD_RETU | |
385 | select WATCHDOG_CORE | |
386 | help | |
387 | Retu watchdog driver for Nokia Internet Tablets (770, N800, | |
388 | N810). At least on N800 the watchdog cannot be disabled, so | |
389 | this driver is essential and you should enable it. | |
390 | ||
391 | To compile this driver as a module, choose M here: the | |
392 | module will be called retu_wdt. | |
393 | ||
a9cb3959 HCE |
394 | # AVR32 Architecture |
395 | ||
396 | config AT32AP700X_WDT | |
397 | tristate "AT32AP700x watchdog" | |
438ff3f3 | 398 | depends on CPU_AT32AP700X |
a9cb3959 HCE |
399 | help |
400 | Watchdog timer embedded into AT32AP700x devices. This will reboot | |
401 | your system when the timeout is reached. | |
402 | ||
c0e962f9 | 403 | # BLACKFIN Architecture |
1e6d320f BW |
404 | |
405 | config BFIN_WDT | |
406 | tristate "Blackfin On-Chip Watchdog Timer" | |
c0e962f9 | 407 | depends on BLACKFIN |
1e6d320f BW |
408 | ---help--- |
409 | If you say yes here you will get support for the Blackfin On-Chip | |
410 | Watchdog Timer. If you have one of these processors and wish to | |
411 | have watchdog support enabled, say Y, otherwise say N. | |
412 | ||
413 | To compile this driver as a module, choose M here: the | |
414 | module will be called bfin_wdt. | |
415 | ||
c0e962f9 WVS |
416 | # CRIS Architecture |
417 | ||
418 | # FRV Architecture | |
419 | ||
420 | # H8300 Architecture | |
421 | ||
1da177e4 LT |
422 | # X86 (i386 + ia64 + x86_64) Architecture |
423 | ||
424 | config ACQUIRE_WDT | |
425 | tristate "Acquire SBC Watchdog Timer" | |
261259b2 | 426 | depends on X86 |
1da177e4 LT |
427 | ---help--- |
428 | This is the driver for the hardware watchdog on Single Board | |
429 | Computers produced by Acquire Inc (and others). This watchdog | |
430 | simply watches your kernel to make sure it doesn't freeze, and if | |
431 | it does, it reboots your computer after a certain amount of time. | |
432 | ||
433 | To compile this driver as a module, choose M here: the | |
434 | module will be called acquirewdt. | |
435 | ||
436 | Most people will say N. | |
437 | ||
438 | config ADVANTECH_WDT | |
439 | tristate "Advantech SBC Watchdog Timer" | |
261259b2 | 440 | depends on X86 |
1da177e4 LT |
441 | help |
442 | If you are configuring a Linux kernel for the Advantech single-board | |
443 | computer, say `Y' here to support its built-in watchdog timer | |
444 | feature. More information can be found at | |
445 | <http://www.advantech.com.tw/products/> | |
446 | ||
447 | config ALIM1535_WDT | |
448 | tristate "ALi M1535 PMU Watchdog Timer" | |
261259b2 | 449 | depends on X86 && PCI |
1da177e4 LT |
450 | ---help--- |
451 | This is the driver for the hardware watchdog on the ALi M1535 PMU. | |
452 | ||
453 | To compile this driver as a module, choose M here: the | |
454 | module will be called alim1535_wdt. | |
455 | ||
456 | Most people will say N. | |
457 | ||
458 | config ALIM7101_WDT | |
459 | tristate "ALi M7101 PMU Computer Watchdog" | |
bdd87354 | 460 | depends on PCI |
1da177e4 LT |
461 | help |
462 | This is the driver for the hardware watchdog on the ALi M7101 PMU | |
bdd87354 AC |
463 | as used in the x86 Cobalt servers and also found in some |
464 | SPARC Netra servers too. | |
1da177e4 LT |
465 | |
466 | To compile this driver as a module, choose M here: the | |
467 | module will be called alim7101_wdt. | |
468 | ||
469 | Most people will say N. | |
470 | ||
96cb4eb0 | 471 | config F71808E_WDT |
e13752a1 | 472 | tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog" |
e1926349 | 473 | depends on X86 |
96cb4eb0 GS |
474 | help |
475 | This is the driver for the hardware watchdog on the Fintek | |
e13752a1 | 476 | F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers. |
96cb4eb0 GS |
477 | |
478 | You can compile this driver directly into the kernel, or use | |
479 | it as a module. The module will be called f71808e_wdt. | |
480 | ||
15e28bf1 PG |
481 | config SP5100_TCO |
482 | tristate "AMD/ATI SP5100 TCO Timer/Watchdog" | |
483 | depends on X86 && PCI | |
484 | ---help--- | |
485 | Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO | |
486 | (Total Cost of Ownership) timer is a watchdog timer that will reboot | |
487 | the machine after its expiration. The expiration time can be | |
488 | configured with the "heartbeat" parameter. | |
489 | ||
490 | To compile this driver as a module, choose M here: the | |
491 | module will be called sp5100_tco. | |
96cb4eb0 | 492 | |
0b36086b JC |
493 | config GEODE_WDT |
494 | tristate "AMD Geode CS5535/CS5536 Watchdog" | |
9b0fd114 | 495 | depends on CS5535_MFGPT |
0b36086b JC |
496 | help |
497 | This driver enables a watchdog capability built into the | |
498 | CS5535/CS5536 companion chips for the AMD Geode GX and LX | |
499 | processors. This watchdog watches your kernel to make sure | |
500 | it doesn't freeze, and if it does, it reboots your computer after | |
501 | a certain amount of time. | |
502 | ||
503 | You can compile this driver directly into the kernel, or use | |
504 | it as a module. The module will be called geodewdt. | |
505 | ||
1da177e4 LT |
506 | config SC520_WDT |
507 | tristate "AMD Elan SC520 processor Watchdog" | |
261259b2 | 508 | depends on X86 |
1da177e4 LT |
509 | help |
510 | This is the driver for the hardware watchdog built in to the | |
511 | AMD "Elan" SC520 microcomputer commonly used in embedded systems. | |
512 | This watchdog simply watches your kernel to make sure it doesn't | |
513 | freeze, and if it does, it reboots your computer after a certain | |
514 | amount of time. | |
515 | ||
516 | You can compile this driver directly into the kernel, or use | |
517 | it as a module. The module will be called sc520_wdt. | |
518 | ||
3a5f9000 DT |
519 | config SBC_FITPC2_WATCHDOG |
520 | tristate "Compulab SBC-FITPC2 watchdog" | |
521 | depends on X86 | |
522 | ---help--- | |
ef39a1bf DT |
523 | This is the driver for the built-in watchdog timer on the fit-PC2, |
524 | fit-PC2i, CM-iAM single-board computers made by Compulab. | |
3a5f9000 DT |
525 | |
526 | It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux. | |
527 | When "Watchdog Timer Value" enabled one can set 31-255 s operational range. | |
528 | ||
529 | Entering BIOS setup temporary disables watchdog operation regardless to current state, | |
530 | so system will not be restarted while user in BIOS setup. | |
531 | ||
532 | Once watchdog was enabled the system will be restarted every | |
533 | "Watchdog Timer Value" period, so to prevent it user can restart or | |
534 | disable the watchdog. | |
535 | ||
536 | To compile this driver as a module, choose M here: the | |
537 | module will be called sbc_fitpc2_wdt. | |
538 | ||
539 | Most people will say N. | |
540 | ||
1da177e4 LT |
541 | config EUROTECH_WDT |
542 | tristate "Eurotech CPU-1220/1410 Watchdog Timer" | |
261259b2 | 543 | depends on X86 |
1da177e4 LT |
544 | help |
545 | Enable support for the watchdog timer on the Eurotech CPU-1220 and | |
546 | CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product | |
547 | information are at <http://www.eurotech.it/>. | |
548 | ||
549 | config IB700_WDT | |
550 | tristate "IB700 SBC Watchdog Timer" | |
261259b2 | 551 | depends on X86 |
1da177e4 LT |
552 | ---help--- |
553 | This is the driver for the hardware watchdog on the IB700 Single | |
554 | Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog | |
555 | simply watches your kernel to make sure it doesn't freeze, and if | |
556 | it does, it reboots your computer after a certain amount of time. | |
557 | ||
558 | This driver is like the WDT501 driver but for slightly different hardware. | |
559 | ||
560 | To compile this driver as a module, choose M here: the | |
561 | module will be called ib700wdt. | |
562 | ||
563 | Most people will say N. | |
564 | ||
d532134d | 565 | config IBMASR |
c310e2b9 | 566 | tristate "IBM Automatic Server Restart" |
261259b2 | 567 | depends on X86 |
c310e2b9 | 568 | help |
d532134d | 569 | This is the driver for the IBM Automatic Server Restart watchdog |
e0845bf4 | 570 | timer built-in into some eServer xSeries machines. |
d532134d AP |
571 | |
572 | To compile this driver as a module, choose M here: the | |
573 | module will be called ibmasr. | |
574 | ||
1da177e4 | 575 | config WAFER_WDT |
01ed08c1 | 576 | tristate "ICP Single Board Computer Watchdog Timer" |
261259b2 | 577 | depends on X86 |
1da177e4 | 578 | help |
01ed08c1 VS |
579 | This is a driver for the hardware watchdog on the ICP Single |
580 | Board Computer. This driver is working on (at least) the following | |
581 | IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782. | |
1da177e4 LT |
582 | |
583 | To compile this driver as a module, choose M here: the | |
584 | module will be called wafer5823wdt. | |
585 | ||
cc90ef0f DH |
586 | config I6300ESB_WDT |
587 | tristate "Intel 6300ESB Timer/Watchdog" | |
7050bd54 | 588 | depends on PCI |
cc90ef0f DH |
589 | ---help--- |
590 | Hardware driver for the watchdog timer built into the Intel | |
591 | 6300ESB controller hub. | |
592 | ||
593 | To compile this driver as a module, choose M here: the | |
594 | module will be called i6300esb. | |
595 | ||
101ce87b AS |
596 | config IE6XX_WDT |
597 | tristate "Intel Atom E6xx Watchdog" | |
598 | depends on X86 && PCI | |
599 | select WATCHDOG_CORE | |
600 | select MFD_CORE | |
601 | select LPC_SCH | |
602 | ---help--- | |
603 | Hardware driver for the watchdog timer built into the Intel | |
604 | Atom E6XX (TunnelCreek) processor. | |
605 | ||
606 | To compile this driver as a module, choose M here: the | |
607 | module will be called ie6xx_wdt. | |
608 | ||
57539c1c DJ |
609 | config INTEL_SCU_WATCHDOG |
610 | bool "Intel SCU Watchdog for Mobile Platforms" | |
d1ec74ab | 611 | depends on X86_INTEL_MID |
57539c1c DJ |
612 | ---help--- |
613 | Hardware driver for the watchdog time built into the Intel SCU | |
614 | for Intel Mobile Platforms. | |
615 | ||
616 | To compile this driver as a module, choose M here. | |
617 | ||
9e0ea345 | 618 | config ITCO_WDT |
cbf40d3f | 619 | tristate "Intel TCO Timer/Watchdog" |
261259b2 | 620 | depends on (X86 || IA64) && PCI |
bff23431 | 621 | select WATCHDOG_CORE |
887c8ec7 | 622 | select LPC_ICH |
9e0ea345 WVS |
623 | ---help--- |
624 | Hardware driver for the intel TCO timer based watchdog devices. | |
625 | These drivers are included in the Intel 82801 I/O Controller | |
12d60e28 | 626 | Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB |
9e0ea345 WVS |
627 | controller hub. |
628 | ||
629 | The TCO (Total Cost of Ownership) timer is a watchdog timer | |
630 | that will reboot the machine after its second expiration. The | |
631 | expiration time can be configured with the "heartbeat" parameter. | |
632 | ||
633 | On some motherboards the driver may fail to reset the chipset's | |
634 | NO_REBOOT flag which prevents the watchdog from rebooting the | |
635 | machine. If this is the case you will get a kernel message like | |
636 | "failed to reset NO_REBOOT flag, reboot disabled by hardware". | |
637 | ||
638 | To compile this driver as a module, choose M here: the | |
639 | module will be called iTCO_wdt. | |
640 | ||
e033351d WVS |
641 | config ITCO_VENDOR_SUPPORT |
642 | bool "Intel TCO Timer/Watchdog Specific Vendor Support" | |
643 | depends on ITCO_WDT | |
644 | ---help--- | |
645 | Add vendor specific support to the intel TCO timer based watchdog | |
646 | devices. At this moment we only have additional support for some | |
647 | SuperMicro Inc. motherboards. | |
648 | ||
38ff6fd2 JBD |
649 | config IT8712F_WDT |
650 | tristate "IT8712F (Smart Guardian) Watchdog Timer" | |
651 | depends on X86 | |
652 | ---help--- | |
653 | This is the driver for the built-in watchdog timer on the IT8712F | |
654 | Super I/0 chipset used on many motherboards. | |
655 | ||
4fc36808 WVS |
656 | If the driver does not work, then make sure that the game port in |
657 | the BIOS is enabled. | |
658 | ||
38ff6fd2 JBD |
659 | To compile this driver as a module, choose M here: the |
660 | module will be called it8712f_wdt. | |
661 | ||
e1fee94f OS |
662 | config IT87_WDT |
663 | tristate "IT87 Watchdog Timer" | |
e1926349 | 664 | depends on X86 |
e1fee94f | 665 | ---help--- |
dfb0b8ea | 666 | This is the driver for the hardware watchdog on the ITE IT8702, |
198ca015 DEP |
667 | IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728 |
668 | Super I/O chips. | |
669 | ||
670 | If the driver does not work, then make sure that the game port in | |
671 | the BIOS is enabled. | |
672 | ||
dfb0b8ea OZ |
673 | This watchdog simply watches your kernel to make sure it doesn't |
674 | freeze, and if it does, it reboots your computer after a certain | |
675 | amount of time. | |
e1fee94f OS |
676 | |
677 | To compile this driver as a module, choose M here: the module will | |
678 | be called it87_wdt. | |
679 | ||
7f4da474 | 680 | config HP_WATCHDOG |
ea6649c7 | 681 | tristate "HP ProLiant iLO2+ Hardware Watchdog Timer" |
f71d26bb | 682 | depends on X86 && PCI |
7f4da474 TM |
683 | help |
684 | A software monitoring watchdog and NMI sourcing driver. This driver | |
86ded1f3 | 685 | will detect lockups and provide a stack trace. This is a driver that |
ea6649c7 | 686 | will only load on an HP ProLiant system with a minimum of iLO2 support. |
86ded1f3 | 687 | To compile this driver as a module, choose M here: the module will be |
688 | called hpwdt. | |
689 | ||
690 | config HPWDT_NMI_DECODING | |
691 | bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer" | |
692 | depends on HP_WATCHDOG | |
a4616153 | 693 | default y |
86ded1f3 | 694 | help |
695 | When an NMI occurs this feature will make the necessary BIOS calls to | |
696 | log the cause of the NMI. | |
7f4da474 | 697 | |
1da177e4 LT |
698 | config SC1200_WDT |
699 | tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" | |
261259b2 | 700 | depends on X86 |
1da177e4 LT |
701 | help |
702 | This is a driver for National Semiconductor PC87307/PC97307 hardware | |
703 | watchdog cards as found on the SC1200. This watchdog is mainly used | |
704 | for power management purposes and can be used to power down the device | |
705 | during inactivity periods (includes interrupt activity monitoring). | |
706 | ||
707 | To compile this driver as a module, choose M here: the | |
708 | module will be called sc1200wdt. | |
709 | ||
710 | Most people will say N. | |
711 | ||
712 | config SCx200_WDT | |
713 | tristate "National Semiconductor SCx200 Watchdog" | |
261259b2 | 714 | depends on SCx200 && PCI |
1da177e4 LT |
715 | help |
716 | Enable the built-in watchdog timer support on the National | |
717 | Semiconductor SCx200 processors. | |
718 | ||
719 | If compiled as a module, it will be called scx200_wdt. | |
720 | ||
789fc0ad SAMJ |
721 | config PC87413_WDT |
722 | tristate "NS PC87413 watchdog" | |
261259b2 | 723 | depends on X86 |
789fc0ad SAMJ |
724 | ---help--- |
725 | This is the driver for the hardware watchdog on the PC87413 chipset | |
726 | This watchdog simply watches your kernel to make sure it doesn't | |
727 | freeze, and if it does, it reboots your computer after a certain | |
728 | amount of time. | |
729 | ||
730 | To compile this driver as a module, choose M here: the | |
731 | module will be called pc87413_wdt. | |
732 | ||
733 | Most people will say N. | |
7944d3a5 | 734 | |
456c7301 MW |
735 | config NV_TCO |
736 | tristate "nVidia TCO Timer/Watchdog" | |
737 | depends on X86 && PCI | |
738 | ---help--- | |
739 | Hardware driver for the TCO timer built into the nVidia Hub family | |
740 | (such as the MCP51). The TCO (Total Cost of Ownership) timer is a | |
741 | watchdog timer that will reboot the machine after its second | |
742 | expiration. The expiration time can be configured with the | |
743 | "heartbeat" parameter. | |
744 | ||
745 | On some motherboards the driver may fail to reset the chipset's | |
746 | NO_REBOOT flag which prevents the watchdog from rebooting the | |
747 | machine. If this is the case you will get a kernel message like | |
748 | "failed to reset NO_REBOOT flag, reboot disabled by hardware". | |
749 | ||
750 | To compile this driver as a module, choose M here: the | |
751 | module will be called nv_tco. | |
752 | ||
b3e8f2c1 FF |
753 | config RDC321X_WDT |
754 | tristate "RDC R-321x SoC watchdog" | |
755 | depends on X86_RDC321X | |
756 | help | |
757 | This is the driver for the built in hardware watchdog | |
758 | in the RDC R-321x SoC. | |
759 | ||
760 | To compile this driver as a module, choose M here: the | |
761 | module will be called rdc321x_wdt. | |
762 | ||
1da177e4 LT |
763 | config 60XX_WDT |
764 | tristate "SBC-60XX Watchdog Timer" | |
261259b2 | 765 | depends on X86 |
1da177e4 LT |
766 | help |
767 | This driver can be used with the watchdog timer found on some | |
768 | single board computers, namely the 6010 PII based computer. | |
769 | It may well work with other cards. It reads port 0x443 to enable | |
770 | and re-set the watchdog timer, and reads port 0x45 to disable | |
771 | the watchdog. If you have a card that behave in similar ways, | |
772 | you can probably make this driver work with your card as well. | |
773 | ||
774 | You can compile this driver directly into the kernel, or use | |
775 | it as a module. The module will be called sbc60xxwdt. | |
776 | ||
3809ad38 IM |
777 | config SBC8360_WDT |
778 | tristate "SBC8360 Watchdog Timer" | |
261259b2 | 779 | depends on X86 |
3809ad38 IM |
780 | ---help--- |
781 | ||
782 | This is the driver for the hardware watchdog on the SBC8360 Single | |
783 | Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com). | |
784 | ||
785 | To compile this driver as a module, choose M here: the | |
4737f097 | 786 | module will be called sbc8360. |
3809ad38 IM |
787 | |
788 | Most people will say N. | |
789 | ||
c4c28335 GG |
790 | config SBC7240_WDT |
791 | tristate "SBC Nano 7240 Watchdog Timer" | |
3369465e | 792 | depends on X86_32 && !UML |
c4c28335 GG |
793 | ---help--- |
794 | This is the driver for the hardware watchdog found on the IEI | |
795 | single board computers EPIC Nano 7240 (and likely others). This | |
796 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
797 | and if it does, it reboots your computer after a certain amount of | |
798 | time. | |
799 | ||
800 | To compile this driver as a module, choose M here: the | |
801 | module will be called sbc7240_wdt. | |
802 | ||
1da177e4 LT |
803 | config CPU5_WDT |
804 | tristate "SMA CPU5 Watchdog" | |
261259b2 | 805 | depends on X86 |
1da177e4 LT |
806 | ---help--- |
807 | TBD. | |
808 | To compile this driver as a module, choose M here: the | |
809 | module will be called cpu5wdt. | |
810 | ||
4c6e63bd WVS |
811 | config SMSC_SCH311X_WDT |
812 | tristate "SMSC SCH311X Watchdog Timer" | |
813 | depends on X86 | |
814 | ---help--- | |
815 | This is the driver for the hardware watchdog timer on the | |
816 | SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset | |
817 | (LPC IO with 8042 KBC, Reset Generation, HWM and multiple | |
818 | serial ports). | |
819 | ||
820 | To compile this driver as a module, choose M here: the | |
821 | module will be called sch311x_wdt. | |
822 | ||
485ae77d SA |
823 | config SMSC37B787_WDT |
824 | tristate "Winbond SMsC37B787 Watchdog Timer" | |
261259b2 | 825 | depends on X86 |
485ae77d SA |
826 | ---help--- |
827 | This is the driver for the hardware watchdog component on the | |
828 | Winbond SMsC37B787 chipset as used on the NetRunner Mainboard | |
829 | from Vision Systems and maybe others. | |
830 | ||
831 | This watchdog simply watches your kernel to make sure it doesn't | |
832 | freeze, and if it does, it reboots your computer after a certain | |
833 | amount of time. | |
834 | ||
835 | Usually a userspace daemon will notify the kernel WDT driver that | |
836 | userspace is still alive, at regular intervals. | |
837 | ||
838 | To compile this driver as a module, choose M here: the | |
839 | module will be called smsc37b787_wdt. | |
840 | ||
841 | Most people will say N. | |
842 | ||
dc3c56b7 MV |
843 | config VIA_WDT |
844 | tristate "VIA Watchdog Timer" | |
690e7a70 | 845 | depends on X86 && PCI |
dc3c56b7 MV |
846 | select WATCHDOG_CORE |
847 | ---help--- | |
848 | This is the driver for the hardware watchdog timer on VIA | |
849 | southbridge chipset CX700, VX800/VX820 or VX855/VX875. | |
850 | ||
851 | To compile this driver as a module, choose M here; the module | |
852 | will be called via_wdt. | |
853 | ||
854 | Most people will say N. | |
855 | ||
1da177e4 | 856 | config W83627HF_WDT |
9c67bea4 | 857 | tristate "W83627HF/W83627DHG Watchdog Timer" |
261259b2 | 858 | depends on X86 |
1da177e4 LT |
859 | ---help--- |
860 | This is the driver for the hardware watchdog on the W83627HF chipset | |
861 | as used in Advantech PC-9578 and Tyan S2721-533 motherboards | |
9c67bea4 BLA |
862 | (and likely others). The driver also supports the W83627DHG chip. |
863 | This watchdog simply watches your kernel to make sure it doesn't | |
864 | freeze, and if it does, it reboots your computer after a certain | |
865 | amount of time. | |
1da177e4 LT |
866 | |
867 | To compile this driver as a module, choose M here: the | |
868 | module will be called w83627hf_wdt. | |
869 | ||
870 | Most people will say N. | |
871 | ||
f9a8c891 | 872 | config W83697HF_WDT |
ff02cfc7 | 873 | tristate "W83697HF/W83697HG Watchdog Timer" |
261259b2 | 874 | depends on X86 |
e0845bf4 | 875 | ---help--- |
ff02cfc7 ST |
876 | This is the driver for the hardware watchdog on the W83697HF/HG |
877 | chipset as used in Dedibox/VIA motherboards (and likely others). | |
878 | This watchdog simply watches your kernel to make sure it doesn't | |
879 | freeze, and if it does, it reboots your computer after a certain | |
880 | amount of time. | |
f9a8c891 | 881 | |
e0845bf4 WVS |
882 | To compile this driver as a module, choose M here: the |
883 | module will be called w83697hf_wdt. | |
f9a8c891 | 884 | |
e0845bf4 | 885 | Most people will say N. |
f9a8c891 | 886 | |
7d8b0906 FF |
887 | config W83697UG_WDT |
888 | tristate "W83697UG/W83697UF Watchdog Timer" | |
889 | depends on X86 | |
890 | ---help--- | |
891 | This is the driver for the hardware watchdog on the W83697UG/UF | |
892 | chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others). | |
893 | This watchdog simply watches your kernel to make sure it doesn't | |
894 | freeze, and if it does, it reboots your computer after a certain | |
895 | amount of time. | |
896 | ||
897 | To compile this driver as a module, choose M here: the | |
898 | module will be called w83697ug_wdt. | |
899 | ||
900 | Most people will say N. | |
901 | ||
1da177e4 LT |
902 | config W83877F_WDT |
903 | tristate "W83877F (EMACS) Watchdog Timer" | |
261259b2 | 904 | depends on X86 |
1da177e4 LT |
905 | ---help--- |
906 | This is the driver for the hardware watchdog on the W83877F chipset | |
907 | as used in EMACS PC-104 motherboards (and likely others). This | |
908 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
909 | and if it does, it reboots your computer after a certain amount of | |
910 | time. | |
911 | ||
912 | To compile this driver as a module, choose M here: the | |
913 | module will be called w83877f_wdt. | |
914 | ||
915 | Most people will say N. | |
916 | ||
b4cc4aa2 JMG |
917 | config W83977F_WDT |
918 | tristate "W83977F (PCM-5335) Watchdog Timer" | |
261259b2 | 919 | depends on X86 |
b4cc4aa2 JMG |
920 | ---help--- |
921 | This is the driver for the hardware watchdog on the W83977F I/O chip | |
922 | as used in AAEON's PCM-5335 SBC (and likely others). This | |
923 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
924 | and if it does, it reboots your computer after a certain amount of | |
925 | time. | |
926 | ||
927 | To compile this driver as a module, choose M here: the | |
928 | module will be called w83977f_wdt. | |
929 | ||
1da177e4 LT |
930 | config MACHZ_WDT |
931 | tristate "ZF MachZ Watchdog" | |
261259b2 | 932 | depends on X86 |
1da177e4 LT |
933 | ---help--- |
934 | If you are using a ZF Micro MachZ processor, say Y here, otherwise | |
e0845bf4 | 935 | N. This is the driver for the watchdog timer built-in on that |
1da177e4 LT |
936 | processor using ZF-Logic interface. This watchdog simply watches |
937 | your kernel to make sure it doesn't freeze, and if it does, it | |
938 | reboots your computer after a certain amount of time. | |
939 | ||
940 | To compile this driver as a module, choose M here: the | |
941 | module will be called machzwd. | |
942 | ||
eed6565f CC |
943 | config SBC_EPX_C3_WATCHDOG |
944 | tristate "Winsystems SBC EPX-C3 watchdog" | |
261259b2 | 945 | depends on X86 |
eed6565f CC |
946 | ---help--- |
947 | This is the driver for the built-in watchdog timer on the EPX-C3 | |
948 | Single-board computer made by Winsystems, Inc. | |
949 | ||
950 | *Note*: This hardware watchdog is not probeable and thus there | |
951 | is no way to know if writing to its IO address will corrupt | |
952 | your system or have any real effect. The only way to be sure | |
953 | that this driver does what you want is to make sure you | |
2621e2a1 | 954 | are running it on an EPX-C3 from Winsystems with the watchdog |
eed6565f CC |
955 | timer at IO address 0x1ee and 0x1ef. It will write to both those |
956 | IO ports. Basically, the assumption is made that if you compile | |
957 | this driver into your kernel and/or load it as a module, that you | |
958 | know what you are doing and that you are in fact running on an | |
959 | EPX-C3 board! | |
960 | ||
961 | To compile this driver as a module, choose M here: the | |
962 | module will be called sbc_epx_c3. | |
963 | ||
c0e962f9 | 964 | # M32R Architecture |
1da177e4 | 965 | |
c0e962f9 WVS |
966 | # M68K Architecture |
967 | ||
4157a04d PDM |
968 | config M54xx_WATCHDOG |
969 | tristate "MCF54xx watchdog support" | |
88cce427 PDM |
970 | depends on M548x |
971 | help | |
972 | To compile this driver as a module, choose M here: the | |
4157a04d | 973 | module will be called m54xx_wdt. |
c0e962f9 | 974 | |
e9659e69 AC |
975 | # MicroBlaze Architecture |
976 | ||
977 | config XILINX_WATCHDOG | |
978 | tristate "Xilinx Watchdog timer" | |
979 | depends on MICROBLAZE | |
980 | ---help--- | |
981 | Watchdog driver for the xps_timebase_wdt ip core. | |
982 | ||
983 | IMPORTANT: The xps_timebase_wdt parent must have the property | |
984 | "clock-frequency" at device tree. | |
985 | ||
986 | To compile this driver as a module, choose M here: the | |
987 | module will be called of_xilinx_wdt. | |
988 | ||
c0e962f9 WVS |
989 | # MIPS Architecture |
990 | ||
f8394f61 GJ |
991 | config ATH79_WDT |
992 | tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog" | |
993 | depends on ATH79 | |
994 | help | |
995 | Hardware driver for the built-in watchdog timer on the Atheros | |
996 | AR71XX/AR724X/AR913X SoCs. | |
997 | ||
90074dce MC |
998 | config BCM47XX_WDT |
999 | tristate "Broadcom BCM47xx Watchdog Timer" | |
1000 | depends on BCM47XX | |
5434a04d | 1001 | select WATCHDOG_CORE |
90074dce | 1002 | help |
6b2aac42 | 1003 | Hardware driver for the Broadcom BCM47xx Watchdog Timer. |
90074dce | 1004 | |
03ec5856 FF |
1005 | config RC32434_WDT |
1006 | tristate "IDT RC32434 SoC Watchdog Timer" | |
1007 | depends on MIKROTIK_RB532 | |
1008 | help | |
1009 | Hardware driver for the IDT RC32434 SoC built-in | |
1010 | watchdog timer. | |
1011 | ||
1012 | To compile this driver as a module, choose M here: the | |
1013 | module will be called rc32434_wdt. | |
1014 | ||
c0e962f9 WVS |
1015 | config INDYDOG |
1016 | tristate "Indy/I2 Hardware Watchdog" | |
1ceea824 | 1017 | depends on SGI_HAS_INDYDOG |
c0e962f9 WVS |
1018 | help |
1019 | Hardware driver for the Indy's/I2's watchdog. This is a | |
1020 | watchdog timer that will reboot the machine after a 60 second | |
1021 | timer expired and no process has written to /dev/watchdog during | |
1022 | that time. | |
1023 | ||
f865c352 PC |
1024 | config JZ4740_WDT |
1025 | tristate "Ingenic jz4740 SoC hardware watchdog" | |
1026 | depends on MACH_JZ4740 | |
85f6df14 | 1027 | select WATCHDOG_CORE |
f865c352 PC |
1028 | help |
1029 | Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs. | |
1030 | ||
c0e962f9 WVS |
1031 | config WDT_MTX1 |
1032 | tristate "MTX-1 Hardware Watchdog" | |
1033 | depends on MIPS_MTX1 | |
1034 | help | |
1035 | Hardware driver for the MTX-1 boards. This is a watchdog timer that | |
1036 | will reboot the machine after a 100 seconds timer expired. | |
1037 | ||
33c050c5 DL |
1038 | config PNX833X_WDT |
1039 | tristate "PNX833x Hardware Watchdog" | |
1040 | depends on SOC_PNX8335 | |
1041 | help | |
1042 | Hardware driver for the PNX833x's watchdog. This is a | |
25985edc | 1043 | watchdog timer that will reboot the machine after a programmable |
33c050c5 DL |
1044 | timer has expired and no process has written to /dev/watchdog during |
1045 | that time. | |
1046 | ||
75c752e6 AS |
1047 | config SIBYTE_WDOG |
1048 | tristate "Sibyte SoC hardware watchdog" | |
1049 | depends on CPU_SB1 | |
1050 | help | |
1051 | Watchdog driver for the built in watchdog hardware in Sibyte | |
1052 | SoC processors. There are apparently two watchdog timers | |
1053 | on such processors; this driver supports only the first one, | |
1054 | because currently Linux only supports exporting one watchdog | |
1055 | to userspace. | |
1056 | ||
1057 | To compile this driver as a loadable module, choose M here. | |
1058 | The module will be called sb_wdog. | |
1059 | ||
c283cf2c MC |
1060 | config AR7_WDT |
1061 | tristate "TI AR7 Watchdog Timer" | |
1062 | depends on AR7 | |
1063 | help | |
1064 | Hardware driver for the TI AR7 Watchdog Timer. | |
1065 | ||
6f702fce AN |
1066 | config TXX9_WDT |
1067 | tristate "Toshiba TXx9 Watchdog Timer" | |
1068 | depends on CPU_TX39XX || CPU_TX49XX | |
d6245842 | 1069 | select WATCHDOG_CORE |
6f702fce AN |
1070 | help |
1071 | Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. | |
1072 | ||
4c076fb4 DD |
1073 | config OCTEON_WDT |
1074 | tristate "Cavium OCTEON SOC family Watchdog Timer" | |
1075 | depends on CPU_CAVIUM_OCTEON | |
1076 | default y | |
1077 | select EXPORT_UASM if OCTEON_WDT = m | |
1078 | help | |
1079 | Hardware driver for OCTEON's on chip watchdog timer. | |
1080 | Enables the watchdog for all cores running Linux. It | |
1081 | installs a NMI handler and pokes the watchdog based on an | |
1082 | interrupt. On first expiration of the watchdog, the | |
1083 | interrupt handler pokes it. The second expiration causes an | |
1084 | NMI that prints a message. The third expiration causes a | |
1085 | global soft reset. | |
1086 | ||
1087 | When userspace has /dev/watchdog open, no poking is done | |
1088 | from the first interrupt, it is then only poked when the | |
1089 | device is written. | |
1090 | ||
b63aa731 FF |
1091 | config BCM63XX_WDT |
1092 | tristate "Broadcom BCM63xx hardware watchdog" | |
1093 | depends on BCM63XX | |
1094 | help | |
1095 | Watchdog driver for the built in watchdog hardware in Broadcom | |
1096 | BCM63xx SoC. | |
1097 | ||
1098 | To compile this driver as a loadable module, choose M here. | |
1099 | The module will be called bcm63xx_wdt. | |
1100 | ||
2f58b8d0 JC |
1101 | config LANTIQ_WDT |
1102 | tristate "Lantiq SoC watchdog" | |
1103 | depends on LANTIQ | |
1104 | help | |
1105 | Hardware driver for the Lantiq SoC Watchdog Timer. | |
1106 | ||
c0e962f9 WVS |
1107 | # PARISC Architecture |
1108 | ||
1109 | # POWERPC Architecture | |
1da177e4 | 1110 | |
3268b561 | 1111 | config GEF_WDT |
cda61c94 | 1112 | tristate "GE Watchdog Timer" |
330bbf48 | 1113 | depends on GE_FPGA |
3268b561 | 1114 | ---help--- |
cda61c94 | 1115 | Watchdog timer found in a number of GE single board computers. |
3268b561 | 1116 | |
8cf18971 | 1117 | config MPC5200_WDT |
6d535599 | 1118 | bool "MPC52xx Watchdog Timer" |
8cf18971 | 1119 | depends on PPC_MPC52xx |
6d535599 AD |
1120 | help |
1121 | Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog. | |
8cf18971 | 1122 | |
28acd02f AV |
1123 | config 8xxx_WDT |
1124 | tristate "MPC8xxx Platform Watchdog Timer" | |
0d7b1014 | 1125 | depends on PPC_8xx || PPC_83xx || PPC_86xx |
28acd02f AV |
1126 | help |
1127 | This driver is for a SoC level watchdog that exists on some | |
1128 | Freescale PowerPC processors. So far this driver supports: | |
0d7b1014 | 1129 | - MPC8xx watchdogs |
28acd02f AV |
1130 | - MPC83xx watchdogs |
1131 | - MPC86xx watchdogs | |
1132 | ||
1133 | For BookE processors (MPC85xx) use the BOOKE_WDT driver instead. | |
fabbfb9e | 1134 | |
3be10211 JC |
1135 | config MV64X60_WDT |
1136 | tristate "MV64X60 (Marvell Discovery) Watchdog Timer" | |
261259b2 | 1137 | depends on MV64X60 |
3be10211 | 1138 | |
618efba9 SM |
1139 | config PIKA_WDT |
1140 | tristate "PIKA FPGA Watchdog" | |
1141 | depends on WARP | |
1142 | default y | |
1143 | help | |
1144 | This enables the watchdog in the PIKA FPGA. Currently used on | |
1145 | the Warp platform. | |
1146 | ||
a2f40ccd | 1147 | config BOOKE_WDT |
fbdd7144 | 1148 | tristate "PowerPC Book-E Watchdog Timer" |
261259b2 | 1149 | depends on BOOKE || 4xx |
52e5cc4e | 1150 | select WATCHDOG_CORE |
39cdc4bf | 1151 | ---help--- |
fbdd7144 TT |
1152 | Watchdog driver for PowerPC Book-E chips, such as the Freescale |
1153 | MPC85xx SOCs and the IBM PowerPC 440. | |
1154 | ||
39cdc4bf KG |
1155 | Please see Documentation/watchdog/watchdog-api.txt for |
1156 | more information. | |
a2f40ccd | 1157 | |
e0dc09ff TT |
1158 | config BOOKE_WDT_DEFAULT_TIMEOUT |
1159 | int "PowerPC Book-E Watchdog Timer Default Timeout" | |
1160 | depends on BOOKE_WDT | |
be0884ce SX |
1161 | default 38 if PPC_FSL_BOOK3E |
1162 | range 0 63 if PPC_FSL_BOOK3E | |
1163 | default 3 if !PPC_FSL_BOOK3E | |
1164 | range 0 3 if !PPC_FSL_BOOK3E | |
e0dc09ff TT |
1165 | help |
1166 | Select the default watchdog timer period to be used by the PowerPC | |
1167 | Book-E watchdog driver. A watchdog "event" occurs when the bit | |
1168 | position represented by this number transitions from zero to one. | |
1169 | ||
1170 | For Freescale Book-E processors, this is a number between 0 and 63. | |
1171 | For other Book-E processors, this is a number between 0 and 3. | |
1172 | ||
e1d1d68a | 1173 | The value can be overridden by the wdt_period command-line parameter. |
e0dc09ff | 1174 | |
180536f8 WVS |
1175 | # PPC64 Architecture |
1176 | ||
1177 | config WATCHDOG_RTAS | |
1178 | tristate "RTAS watchdog" | |
261259b2 | 1179 | depends on PPC_RTAS |
180536f8 WVS |
1180 | help |
1181 | This driver adds watchdog support for the RTAS watchdog. | |
1182 | ||
c310e2b9 | 1183 | To compile this driver as a module, choose M here. The module |
180536f8 WVS |
1184 | will be called wdrtas. |
1185 | ||
1da177e4 LT |
1186 | # S390 Architecture |
1187 | ||
1188 | config ZVM_WATCHDOG | |
1189 | tristate "z/VM Watchdog Timer" | |
261259b2 | 1190 | depends on S390 |
1da177e4 LT |
1191 | help |
1192 | IBM s/390 and zSeries machines running under z/VM 5.1 or later | |
1193 | provide a virtual watchdog timer to their guest that cause a | |
1194 | user define Control Program command to be executed after a | |
1195 | timeout. | |
1196 | ||
1197 | To compile this driver as a module, choose M here. The module | |
1198 | will be called vmwatchdog. | |
1199 | ||
c0e962f9 | 1200 | # SUPERH (sh + sh64) Architecture |
1da177e4 LT |
1201 | |
1202 | config SH_WDT | |
1203 | tristate "SuperH Watchdog" | |
d0afa579 | 1204 | depends on SUPERH && (CPU_SH3 || CPU_SH4) |
1950f499 | 1205 | select WATCHDOG_CORE |
1da177e4 LT |
1206 | help |
1207 | This driver adds watchdog support for the integrated watchdog in the | |
1208 | SuperH processors. If you have one of these processors and wish | |
1209 | to have watchdog support enabled, say Y, otherwise say N. | |
1210 | ||
1211 | As a side note, saying Y here will automatically boost HZ to 1000 | |
1212 | so that the timer has a chance to clear the overflow counter. On | |
1213 | slower systems (such as the SH-2 and SH-3) this will likely yield | |
1214 | some performance issues. As such, the WDT should be avoided here | |
1215 | unless it is absolutely necessary. | |
1216 | ||
1217 | To compile this driver as a module, choose M here: the | |
1218 | module will be called shwdt. | |
1219 | ||
c0e962f9 WVS |
1220 | # SPARC Architecture |
1221 | ||
1da177e4 LT |
1222 | # SPARC64 Architecture |
1223 | ||
1224 | config WATCHDOG_CP1XXX | |
1225 | tristate "CP1XXX Hardware Watchdog support" | |
261259b2 | 1226 | depends on SPARC64 && PCI |
1da177e4 LT |
1227 | ---help--- |
1228 | This is the driver for the hardware watchdog timers present on | |
1229 | Sun Microsystems CompactPCI models CP1400 and CP1500. | |
1230 | ||
1231 | To compile this driver as a module, choose M here: the | |
1232 | module will be called cpwatchdog. | |
1233 | ||
1234 | If you do not have a CompactPCI model CP1400 or CP1500, or | |
1235 | another UltraSPARC-IIi-cEngine boardset with hardware watchdog, | |
1236 | you should say N to this option. | |
1237 | ||
1238 | config WATCHDOG_RIO | |
1239 | tristate "RIO Hardware Watchdog support" | |
261259b2 | 1240 | depends on SPARC64 && PCI |
1da177e4 LT |
1241 | help |
1242 | Say Y here to support the hardware watchdog capability on Sun RIO | |
1243 | machines. The watchdog timeout period is normally one minute but | |
1244 | can be changed with a boot-time parameter. | |
1245 | ||
c0e962f9 WVS |
1246 | # XTENSA Architecture |
1247 | ||
066d6c7f JB |
1248 | # Xen Architecture |
1249 | ||
1250 | config XEN_WDT | |
1251 | tristate "Xen Watchdog support" | |
1252 | depends on XEN | |
1253 | help | |
1254 | Say Y here to support the hypervisor watchdog capability provided | |
1255 | by Xen 4.0 and newer. The watchdog timeout period is normally one | |
1256 | minute but can be changed with a boot-time parameter. | |
1257 | ||
d805a786 AV |
1258 | config UML_WATCHDOG |
1259 | tristate "UML watchdog" | |
1260 | depends on UML | |
1261 | ||
1da177e4 LT |
1262 | # |
1263 | # ISA-based Watchdog Cards | |
1264 | # | |
1265 | ||
1266 | comment "ISA-based Watchdog Cards" | |
261259b2 | 1267 | depends on ISA |
1da177e4 LT |
1268 | |
1269 | config PCWATCHDOG | |
1270 | tristate "Berkshire Products ISA-PC Watchdog" | |
261259b2 | 1271 | depends on ISA |
1da177e4 LT |
1272 | ---help--- |
1273 | This is the driver for the Berkshire Products ISA-PC Watchdog card. | |
1274 | This card simply watches your kernel to make sure it doesn't freeze, | |
1275 | and if it does, it reboots your computer after a certain amount of | |
1276 | time. This driver is like the WDT501 driver but for different | |
1277 | hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC | |
1278 | watchdog cards can be ordered from <http://www.berkprod.com/>. | |
1279 | ||
1280 | To compile this driver as a module, choose M here: the | |
1281 | module will be called pcwd. | |
1282 | ||
1283 | Most people will say N. | |
1284 | ||
1285 | config MIXCOMWD | |
1286 | tristate "Mixcom Watchdog" | |
261259b2 | 1287 | depends on ISA |
1da177e4 LT |
1288 | ---help--- |
1289 | This is a driver for the Mixcom hardware watchdog cards. This | |
1290 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
1291 | and if it does, it reboots your computer after a certain amount of | |
1292 | time. | |
1293 | ||
1294 | To compile this driver as a module, choose M here: the | |
1295 | module will be called mixcomwd. | |
1296 | ||
1297 | Most people will say N. | |
1298 | ||
1299 | config WDT | |
1300 | tristate "WDT Watchdog timer" | |
261259b2 | 1301 | depends on ISA |
1da177e4 LT |
1302 | ---help--- |
1303 | If you have a WDT500P or WDT501P watchdog board, say Y here, | |
1304 | otherwise N. It is not possible to probe for this board, which means | |
1305 | that you have to inform the kernel about the IO port and IRQ that | |
1306 | is needed (you can do this via the io and irq parameters) | |
1307 | ||
1308 | To compile this driver as a module, choose M here: the | |
1309 | module will be called wdt. | |
1310 | ||
1da177e4 LT |
1311 | # |
1312 | # PCI-based Watchdog Cards | |
1313 | # | |
1314 | ||
1315 | comment "PCI-based Watchdog Cards" | |
261259b2 | 1316 | depends on PCI |
1da177e4 LT |
1317 | |
1318 | config PCIPCWATCHDOG | |
1319 | tristate "Berkshire Products PCI-PC Watchdog" | |
261259b2 | 1320 | depends on PCI |
1da177e4 LT |
1321 | ---help--- |
1322 | This is the driver for the Berkshire Products PCI-PC Watchdog card. | |
1323 | This card simply watches your kernel to make sure it doesn't freeze, | |
1324 | and if it does, it reboots your computer after a certain amount of | |
1325 | time. The card can also monitor the internal temperature of the PC. | |
1326 | More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>. | |
1327 | ||
1328 | To compile this driver as a module, choose M here: the | |
1329 | module will be called pcwd_pci. | |
1330 | ||
1331 | Most people will say N. | |
1332 | ||
1333 | config WDTPCI | |
1334 | tristate "PCI-WDT500/501 Watchdog timer" | |
261259b2 | 1335 | depends on PCI |
1da177e4 LT |
1336 | ---help--- |
1337 | If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N. | |
1338 | ||
9b901ee0 WVS |
1339 | If you have a PCI-WDT501 watchdog board then you can enable the |
1340 | temperature sensor by setting the type parameter to 501. | |
1da177e4 LT |
1341 | |
1342 | If you want to enable the Fan Tachometer on the PCI-WDT501, then you | |
1343 | can do this via the tachometer parameter. Only do this if you have a | |
1344 | fan tachometer actually set up. | |
1345 | ||
9b901ee0 WVS |
1346 | To compile this driver as a module, choose M here: the |
1347 | module will be called wdt_pci. | |
1348 | ||
1da177e4 LT |
1349 | # |
1350 | # USB-based Watchdog Cards | |
1351 | # | |
1352 | ||
1353 | comment "USB-based Watchdog Cards" | |
261259b2 | 1354 | depends on USB |
1da177e4 LT |
1355 | |
1356 | config USBPCWATCHDOG | |
1357 | tristate "Berkshire Products USB-PC Watchdog" | |
261259b2 | 1358 | depends on USB |
1da177e4 LT |
1359 | ---help--- |
1360 | This is the driver for the Berkshire Products USB-PC Watchdog card. | |
1361 | This card simply watches your kernel to make sure it doesn't freeze, | |
1362 | and if it does, it reboots your computer after a certain amount of | |
1363 | time. The card can also monitor the internal temperature of the PC. | |
1364 | More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>. | |
1365 | ||
1366 | To compile this driver as a module, choose M here: the | |
1367 | module will be called pcwd_usb. | |
1368 | ||
1369 | Most people will say N. | |
1370 | ||
261259b2 | 1371 | endif # WATCHDOG |