[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / video / auo_k1901fb.c

/*
 * auok190xfb.c -- FB driver for AUO-K1901 controllers
 *
 * Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de>
 *
 * based on broadsheetfb.c
 *
 * Copyright (C) 2008, Jaya Kumar
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
 *
 * This driver is written to be used with the AUO-K1901 display controller.
 *
 * It is intended to be architecture independent. A board specific driver
 * must be used to perform all the physical IO interactions.
 *
 * The controller supports different update modes:
 * mode0+1 16 step gray (4bit)
 * mode2+3 4 step gray (2bit)
 * mode4+5 2 step gray (1bit)
 * - mode4 is described as "without LUT"
 * mode7 automatic selection of update mode
 *
 * The most interesting difference to the K1900 is the ability to do screen
 * updates in an asynchronous fashion. Where the K1900 needs to wait for the
 * current update to complete, the K1901 can process later updates already.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/list.h>
#include <linux/firmware.h>
#include <linux/gpio.h>
#include <linux/pm_runtime.h>

#include <video/auo_k190xfb.h>

#include "auo_k190x.h"

/*
 * AUO-K1901 specific commands
 */

#define AUOK1901_CMD_LUT_INTERFACE	0x0005
#define AUOK1901_CMD_DMA_START		0x1001
#define AUOK1901_CMD_CURSOR_START	0x1007
#define AUOK1901_CMD_CURSOR_STOP	AUOK190X_CMD_DATA_STOP
#define AUOK1901_CMD_DDMA_START		0x1009

#define AUOK1901_INIT_GATE_PULSE_LOW	(0 << 14)
#define AUOK1901_INIT_GATE_PULSE_HIGH	(1 << 14)
#define AUOK1901_INIT_SINGLE_GATE	(0 << 13)
#define AUOK1901_INIT_DOUBLE_GATE	(1 << 13)

/* Bits to pixels
 *   Mode	15-12	11-8	7-4	3-0
 *   format2	2	T	1	T
 *   format3	1	T	2	T
 *   format4	T	2	T	1
 *   format5	T	1	T	2
 *
 *   halftone modes:
 *   format6	2	2	1	1
 *   format7	1	1	2	2
 */
#define AUOK1901_INIT_FORMAT2		(1 << 7)
#define AUOK1901_INIT_FORMAT3		((1 << 7) | (1 << 6))
#define AUOK1901_INIT_FORMAT4		(1 << 8)
#define AUOK1901_INIT_FORMAT5		((1 << 8) | (1 << 6))
#define AUOK1901_INIT_FORMAT6		((1 << 8) | (1 << 7))
#define AUOK1901_INIT_FORMAT7		((1 << 8) | (1 << 7) | (1 << 6))

/* res[4] to bit 10
 * res[3-0] to bits 5-2
 */
#define AUOK1901_INIT_RESOLUTION(_res)	(((_res & (1 << 4)) << 6) \
					 | ((_res & 0xf) << 2))

/*
 * portrait / landscape orientation in AUOK1901_CMD_DMA_START
 */
#define AUOK1901_DMA_ROTATE90(_rot)		((_rot & 1) << 13)

/*
 * equivalent to 1 << 11, needs the ~ to have same rotation like K1900
 */
#define AUOK1901_DDMA_ROTATE180(_rot)		((~_rot & 2) << 10)

static void auok1901_init(struct auok190xfb_par *par)
{
	struct auok190x_board *board = par->board;
	u16 init_param = 0;

	init_param |= AUOK190X_INIT_INVERSE_WHITE;
	init_param |= AUOK190X_INIT_FORMAT0;
	init_param |= AUOK1901_INIT_RESOLUTION(par->resolution);
	init_param |= AUOK190X_INIT_SHIFT_LEFT;

	auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param);

	/* let the controller finish */
	board->wait_for_rdy(par);
}

static void auok1901_update_region(struct auok190xfb_par *par, int mode,
						u16 y1, u16 y2)
{
	struct device *dev = par->info->device;
	unsigned char *buf = (unsigned char *)par->info->screen_base;
	int xres = par->info->var.xres;
	u16 args[5];

	pm_runtime_get_sync(dev);

	mutex_lock(&(par->io_lock));

	/* y1 and y2 must be a multiple of 2 so drop the lowest bit */
	y1 &= 0xfffe;
	y2 &= 0xfffe;

	dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n",
		1, y1+1, xres, y2-y1, mode);

	/* K1901: first transfer the region data */
	args[0] = AUOK1901_DMA_ROTATE90(par->rotation) | 1;
	args[1] = y1 + 1;
	args[2] = xres;
	args[3] = y2 - y1;
	buf += y1 * xres;
	auok190x_send_cmdargs_pixels_nowait(par, AUOK1901_CMD_DMA_START, 4,
					    args, ((y2 - y1) * xres)/2,
					    (u16 *) buf);
	auok190x_send_command_nowait(par, AUOK190X_CMD_DATA_STOP);

	/* K1901: second tell the controller to update the region with mode */
	args[0] = mode | AUOK1901_DDMA_ROTATE180(par->rotation);
	args[1] = 1;
	args[2] = y1 + 1;
	args[3] = xres;
	args[4] = y2 - y1;
	auok190x_send_cmdargs_nowait(par, AUOK1901_CMD_DDMA_START, 5, args);

	par->update_cnt++;

	mutex_unlock(&(par->io_lock));

	pm_runtime_mark_last_busy(dev);
	pm_runtime_put_autosuspend(dev);
}

static void auok1901fb_dpy_update_pages(struct auok190xfb_par *par,
						u16 y1, u16 y2)
{
	int mode;

	if (par->update_mode < 0) {
		mode = AUOK190X_UPDATE_MODE(1);
		par->last_mode = -1;
	} else {
		mode = AUOK190X_UPDATE_MODE(par->update_mode);
		par->last_mode = par->update_mode;
	}

	if (par->flash)
		mode |= AUOK190X_UPDATE_NONFLASH;

	auok1901_update_region(par, mode, y1, y2);
}

static void auok1901fb_dpy_update(struct auok190xfb_par *par)
{
	int mode;

	/* When doing full updates, wait for the controller to be ready
	 * This will hopefully catch some hangs of the K1901
	 */
	par->board->wait_for_rdy(par);

	if (par->update_mode < 0) {
		mode = AUOK190X_UPDATE_MODE(0);
		par->last_mode = -1;
	} else {
		mode = AUOK190X_UPDATE_MODE(par->update_mode);
		par->last_mode = par->update_mode;
	}

	if (par->flash)
		mode |= AUOK190X_UPDATE_NONFLASH;

	auok1901_update_region(par, mode, 0, par->info->var.yres);
	par->update_cnt = 0;
}

static bool auok1901fb_need_refresh(struct auok190xfb_par *par)
{
	return (par->update_cnt > 10);
}

static int auok1901fb_probe(struct platform_device *pdev)
{
	struct auok190x_init_data init;
	struct auok190x_board *board;

	/* pick up board specific routines */
	board = pdev->dev.platform_data;
	if (!board)
		return -EINVAL;

	/* fill temporary init struct for common init */
	init.id = "auo_k1901fb";
	init.board = board;
	init.update_partial = auok1901fb_dpy_update_pages;
	init.update_all = auok1901fb_dpy_update;
	init.need_refresh = auok1901fb_need_refresh;
	init.init = auok1901_init;

	return auok190x_common_probe(pdev, &init);
}

static int auok1901fb_remove(struct platform_device *pdev)
{
	return auok190x_common_remove(pdev);
}

static struct platform_driver auok1901fb_driver = {
	.probe	= auok1901fb_probe,
	.remove = auok1901fb_remove,
	.driver	= {
		.owner	= THIS_MODULE,
		.name	= "auo_k1901fb",
		.pm = &auok190x_pm,
	},
};
module_platform_driver(auok1901fb_driver);

MODULE_DESCRIPTION("framebuffer driver for the AUO-K1901 EPD controller");
MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
MODULE_LICENSE("GPL");
Commit	Line	Data
53027cdf HS	1	/*
	2	* auok190xfb.c -- FB driver for AUO-K1901 controllers
	3	*
	4	* Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de>
	5	*
	6	* based on broadsheetfb.c
	7	*
	8	* Copyright (C) 2008, Jaya Kumar
	9	*
	10	* This program is free software; you can redistribute it and/or modify
	11	* it under the terms of the GNU General Public License version 2 as
	12	* published by the Free Software Foundation.
	13	*
	14	* Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
	15	*
	16	* This driver is written to be used with the AUO-K1901 display controller.
	17	*
	18	* It is intended to be architecture independent. A board specific driver
	19	* must be used to perform all the physical IO interactions.
	20	*
	21	* The controller supports different update modes:
	22	* mode0+1 16 step gray (4bit)
	23	* mode2+3 4 step gray (2bit)
	24	* mode4+5 2 step gray (1bit)
	25	* - mode4 is described as "without LUT"
	26	* mode7 automatic selection of update mode
	27	*
	28	* The most interesting difference to the K1900 is the ability to do screen
	29	* updates in an asynchronous fashion. Where the K1900 needs to wait for the
	30	* current update to complete, the K1901 can process later updates already.
	31	*/
	32
	33	#include <linux/module.h>
	34	#include <linux/kernel.h>
	35	#include <linux/errno.h>
	36	#include <linux/string.h>
	37	#include <linux/mm.h>
	38	#include <linux/slab.h>
	39	#include <linux/delay.h>
	40	#include <linux/interrupt.h>
	41	#include <linux/fb.h>
	42	#include <linux/init.h>
	43	#include <linux/platform_device.h>
	44	#include <linux/list.h>
	45	#include <linux/firmware.h>
	46	#include <linux/gpio.h>
	47	#include <linux/pm_runtime.h>
	48
	49	#include <video/auo_k190xfb.h>
	50
	51	#include "auo_k190x.h"
	52
	53	/*
	54	* AUO-K1901 specific commands
	55	*/
	56
	57	#define AUOK1901_CMD_LUT_INTERFACE 0x0005
	58	#define AUOK1901_CMD_DMA_START 0x1001
	59	#define AUOK1901_CMD_CURSOR_START 0x1007
	60	#define AUOK1901_CMD_CURSOR_STOP AUOK190X_CMD_DATA_STOP
	61	#define AUOK1901_CMD_DDMA_START 0x1009
	62
	63	#define AUOK1901_INIT_GATE_PULSE_LOW (0 << 14)
	64	#define AUOK1901_INIT_GATE_PULSE_HIGH (1 << 14)
65	#define AUOK1901_INIT_SINGLE_GATE (0 << 13)
66	#define AUOK1901_INIT_DOUBLE_GATE (1 << 13)
67
68	/* Bits to pixels
69	* Mode 15-12 11-8 7-4 3-0
70	* format2 2 T 1 T
71	* format3 1 T 2 T
72	* format4 T 2 T 1
73	* format5 T 1 T 2
74	*
75	* halftone modes:
76	* format6 2 2 1 1
77	* format7 1 1 2 2
78	*/
79	#define AUOK1901_INIT_FORMAT2 (1 << 7)
80	#define AUOK1901_INIT_FORMAT3 ((1 << 7) \| (1 << 6))
81	#define AUOK1901_INIT_FORMAT4 (1 << 8)
82	#define AUOK1901_INIT_FORMAT5 ((1 << 8) \| (1 << 6))
83	#define AUOK1901_INIT_FORMAT6 ((1 << 8) \| (1 << 7))
84	#define AUOK1901_INIT_FORMAT7 ((1 << 8) \| (1 << 7) \| (1 << 6))
85
86	/* res[4] to bit 10
87	* res[3-0] to bits 5-2
88	*/
89	#define AUOK1901_INIT_RESOLUTION(_res) (((_res & (1 << 4)) << 6) \
90	\| ((_res & 0xf) << 2))
91
92	/*
93	* portrait / landscape orientation in AUOK1901_CMD_DMA_START
94	*/
95	#define AUOK1901_DMA_ROTATE90(_rot) ((_rot & 1) << 13)
96
97	/*
98	* equivalent to 1 << 11, needs the ~ to have same rotation like K1900
99	*/
100	#define AUOK1901_DDMA_ROTATE180(_rot) ((~_rot & 2) << 10)
101
102	static void auok1901_init(struct auok190xfb_par *par)
103	{
104	struct auok190x_board *board = par->board;
105	u16 init_param = 0;
106
107	init_param \|= AUOK190X_INIT_INVERSE_WHITE;
108	init_param \|= AUOK190X_INIT_FORMAT0;
109	init_param \|= AUOK1901_INIT_RESOLUTION(par->resolution);
110	init_param \|= AUOK190X_INIT_SHIFT_LEFT;
111
112	auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param);
113
114	/* let the controller finish */
115	board->wait_for_rdy(par);
116	}
117
118	static void auok1901_update_region(struct auok190xfb_par *par, int mode,
119	u16 y1, u16 y2)
120	{
121	struct device *dev = par->info->device;
122	unsigned char buf = (unsigned char )par->info->screen_base;
123	int xres = par->info->var.xres;
124	u16 args[5];
125
126	pm_runtime_get_sync(dev);
127
128	mutex_lock(&(par->io_lock));
129
130	/* y1 and y2 must be a multiple of 2 so drop the lowest bit */
131	y1 &= 0xfffe;
132	y2 &= 0xfffe;
133
134	dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n",
135	1, y1+1, xres, y2-y1, mode);
136
137	/* K1901: first transfer the region data */
138	args[0] = AUOK1901_DMA_ROTATE90(par->rotation) \| 1;
139	args[1] = y1 + 1;
140	args[2] = xres;
141	args[3] = y2 - y1;
142	buf += y1 * xres;
143	auok190x_send_cmdargs_pixels_nowait(par, AUOK1901_CMD_DMA_START, 4,
144	args, ((y2 - y1) * xres)/2,
145	(u16 *) buf);
146	auok190x_send_command_nowait(par, AUOK190X_CMD_DATA_STOP);
147
148	/* K1901: second tell the controller to update the region with mode */
149	args[0] = mode \| AUOK1901_DDMA_ROTATE180(par->rotation);
150	args[1] = 1;
151	args[2] = y1 + 1;
152	args[3] = xres;
153	args[4] = y2 - y1;
154	auok190x_send_cmdargs_nowait(par, AUOK1901_CMD_DDMA_START, 5, args);
155
156	par->update_cnt++;
157
158	mutex_unlock(&(par->io_lock));
159
160	pm_runtime_mark_last_busy(dev);
161	pm_runtime_put_autosuspend(dev);
162	}
163
164	static void auok1901fb_dpy_update_pages(struct auok190xfb_par *par,
165	u16 y1, u16 y2)
166	{
167	int mode;
168
169	if (par->update_mode < 0) {
170	mode = AUOK190X_UPDATE_MODE(1);
171	par->last_mode = -1;
172	} else {
173	mode = AUOK190X_UPDATE_MODE(par->update_mode);
174	par->last_mode = par->update_mode;
175	}
176
177	if (par->flash)
178	mode \|= AUOK190X_UPDATE_NONFLASH;
179
180	auok1901_update_region(par, mode, y1, y2);
181	}
182
183	static void auok1901fb_dpy_update(struct auok190xfb_par *par)
184	{
185	int mode;
186
187	/* When doing full updates, wait for the controller to be ready
188	* This will hopefully catch some hangs of the K1901
189	*/
190	par->board->wait_for_rdy(par);
191
192	if (par->update_mode < 0) {
193	mode = AUOK190X_UPDATE_MODE(0);
194	par->last_mode = -1;
195	} else {
196	mode = AUOK190X_UPDATE_MODE(par->update_mode);
197	par->last_mode = par->update_mode;
198	}
199
200	if (par->flash)
201	mode \|= AUOK190X_UPDATE_NONFLASH;
202
203	auok1901_update_region(par, mode, 0, par->info->var.yres);
204	par->update_cnt = 0;
205	}
206
207	static bool auok1901fb_need_refresh(struct auok190xfb_par *par)
208	{
209	return (par->update_cnt > 10);
210	}
211
48c68c4f	212	static int auok1901fb_probe(struct platform_device *pdev)
53027cdf HS	213	{
	214	struct auok190x_init_data init;
	215	struct auok190x_board *board;
	216
	217	/* pick up board specific routines */
	218	board = pdev->dev.platform_data;
	219	if (!board)
	220	return -EINVAL;
	221
	222	/* fill temporary init struct for common init */
	223	init.id = "auo_k1901fb";
	224	init.board = board;
	225	init.update_partial = auok1901fb_dpy_update_pages;
	226	init.update_all = auok1901fb_dpy_update;
	227	init.need_refresh = auok1901fb_need_refresh;
	228	init.init = auok1901_init;
	229
	230	return auok190x_common_probe(pdev, &init);
	231	}
	232
48c68c4f	233	static int auok1901fb_remove(struct platform_device *pdev)
53027cdf HS	234	{
	235	return auok190x_common_remove(pdev);
	236	}
	237
	238	static struct platform_driver auok1901fb_driver = {
	239	.probe = auok1901fb_probe,
48c68c4f	240	.remove = auok1901fb_remove,
53027cdf HS	241	.driver = {
	242	.owner = THIS_MODULE,
	243	.name = "auo_k1901fb",
	244	.pm = &auok190x_pm,
	245	},
	246	};
	247	module_platform_driver(auok1901fb_driver);
	248
	249	MODULE_DESCRIPTION("framebuffer driver for the AUO-K1901 EPD controller");
	250	MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
	251	MODULE_LICENSE("GPL");