Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Video configuration | |
3 | # | |
4 | ||
5 | menu "Graphics support" | |
e25df120 | 6 | depends on HAS_IOMEM |
1da177e4 | 7 | |
179b025f RD |
8 | source "drivers/char/agp/Kconfig" |
9 | ||
deb2d2ec BH |
10 | source "drivers/gpu/vga/Kconfig" |
11 | ||
c0e09200 | 12 | source "drivers/gpu/drm/Kconfig" |
ba70710e | 13 | |
b2f594fd AD |
14 | config VGASTATE |
15 | tristate | |
16 | default n | |
17 | ||
23b0f015 LY |
18 | config VIDEO_OUTPUT_CONTROL |
19 | tristate "Lowlevel video output switch controls" | |
23b0f015 LY |
20 | help |
21 | This framework adds support for low-level control of the video | |
22 | output switch. | |
23 | ||
179b025f | 24 | menuconfig FB |
1da177e4 LT |
25 | tristate "Support for frame buffer devices" |
26 | ---help--- | |
27 | The frame buffer device provides an abstraction for the graphics | |
28 | hardware. It represents the frame buffer of some video hardware and | |
29 | allows application software to access the graphics hardware through | |
30 | a well-defined interface, so the software doesn't need to know | |
31 | anything about the low-level (hardware register) stuff. | |
32 | ||
33 | Frame buffer devices work identically across the different | |
34 | architectures supported by Linux and make the implementation of | |
35 | application programs easier and more portable; at this point, an X | |
36 | server exists which uses the frame buffer device exclusively. | |
37 | On several non-X86 architectures, the frame buffer device is the | |
38 | only way to use the graphics hardware. | |
39 | ||
40 | The device is accessed through special device nodes, usually located | |
41 | in the /dev directory, i.e. /dev/fb*. | |
42 | ||
43 | You need an utility program called fbset to make full use of frame | |
44 | buffer devices. Please read <file:Documentation/fb/framebuffer.txt> | |
45 | and the Framebuffer-HOWTO at | |
248ae0d4 | 46 | <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more |
1da177e4 LT |
47 | information. |
48 | ||
49 | Say Y here and to the driver for your graphics board below if you | |
50 | are compiling a kernel for a non-x86 architecture. | |
51 | ||
52 | If you are compiling for the x86 architecture, you can say Y if you | |
53 | want to play with it, but it is not essential. Please note that | |
54 | running graphical applications that directly touch the hardware | |
55 | (e.g. an accelerated X server) and that are not frame buffer | |
56 | device-aware may cause unexpected results. If unsure, say N. | |
57 | ||
e0e34ef7 JS |
58 | config FIRMWARE_EDID |
59 | bool "Enable firmware EDID" | |
60 | depends on FB | |
61 | default n | |
62 | ---help--- | |
63 | This enables access to the EDID transferred from the firmware. | |
64 | On the i386, this is from the Video BIOS. Enable this if DDC/I2C | |
65 | transfers do not work for your driver and if you are using | |
66 | nvidiafb, i810fb or savagefb. | |
67 | ||
68 | In general, choosing Y for this option is safe. If you | |
69 | experience extremely long delays while booting before you get | |
70 | something on your display, try setting this to N. Matrox cards in | |
71 | combination with certain motherboards and monitors are known to | |
72 | suffer from this problem. | |
73 | ||
fc5891c8 DM |
74 | config FB_DDC |
75 | tristate | |
e0e34ef7 JS |
76 | depends on FB |
77 | select I2C_ALGOBIT | |
78 | select I2C | |
fc5891c8 DM |
79 | default n |
80 | ||
4d31a2b7 MJ |
81 | config FB_BOOT_VESA_SUPPORT |
82 | bool | |
83 | depends on FB | |
84 | default n | |
85 | ---help--- | |
86 | If true, at least one selected framebuffer driver can take advantage | |
87 | of VESA video modes set at an early boot stage via the vga= parameter. | |
88 | ||
1da177e4 LT |
89 | config FB_CFB_FILLRECT |
90 | tristate | |
91 | depends on FB | |
92 | default n | |
93 | ---help--- | |
94 | Include the cfb_fillrect function for generic software rectangle | |
95 | filling. This is used by drivers that don't provide their own | |
96 | (accelerated) version. | |
97 | ||
98 | config FB_CFB_COPYAREA | |
99 | tristate | |
100 | depends on FB | |
101 | default n | |
102 | ---help--- | |
103 | Include the cfb_copyarea function for generic software area copying. | |
104 | This is used by drivers that don't provide their own (accelerated) | |
105 | version. | |
106 | ||
107 | config FB_CFB_IMAGEBLIT | |
108 | tristate | |
109 | depends on FB | |
110 | default n | |
111 | ---help--- | |
112 | Include the cfb_imageblit function for generic software image | |
113 | blitting. This is used by drivers that don't provide their own | |
114 | (accelerated) version. | |
115 | ||
779121e9 PP |
116 | config FB_CFB_REV_PIXELS_IN_BYTE |
117 | bool | |
118 | depends on FB | |
119 | default n | |
120 | ---help--- | |
121 | Allow generic frame-buffer functions to work on displays with 1, 2 | |
122 | and 4 bits per pixel depths which has opposite order of pixels in | |
123 | byte order to bytes in long order. | |
124 | ||
68648ed1 AD |
125 | config FB_SYS_FILLRECT |
126 | tristate | |
127 | depends on FB | |
128 | default n | |
129 | ---help--- | |
130 | Include the sys_fillrect function for generic software rectangle | |
131 | filling. This is used by drivers that don't provide their own | |
132 | (accelerated) version and the framebuffer is in system RAM. | |
133 | ||
134 | config FB_SYS_COPYAREA | |
135 | tristate | |
136 | depends on FB | |
137 | default n | |
138 | ---help--- | |
139 | Include the sys_copyarea function for generic software area copying. | |
140 | This is used by drivers that don't provide their own (accelerated) | |
141 | version and the framebuffer is in system RAM. | |
142 | ||
143 | config FB_SYS_IMAGEBLIT | |
144 | tristate | |
145 | depends on FB | |
146 | default n | |
147 | ---help--- | |
148 | Include the sys_imageblit function for generic software image | |
149 | blitting. This is used by drivers that don't provide their own | |
150 | (accelerated) version and the framebuffer is in system RAM. | |
151 | ||
e4c690e0 AV |
152 | menuconfig FB_FOREIGN_ENDIAN |
153 | bool "Framebuffer foreign endianness support" | |
154 | depends on FB | |
155 | ---help--- | |
156 | This menu will let you enable support for the framebuffers with | |
157 | non-native endianness (e.g. Little-Endian framebuffer on a | |
158 | Big-Endian machine). Most probably you don't have such hardware, | |
159 | so it's safe to say "n" here. | |
160 | ||
161 | choice | |
162 | prompt "Choice endianness support" | |
163 | depends on FB_FOREIGN_ENDIAN | |
164 | ||
165 | config FB_BOTH_ENDIAN | |
166 | bool "Support for Big- and Little-Endian framebuffers" | |
167 | ||
168 | config FB_BIG_ENDIAN | |
169 | bool "Support for Big-Endian framebuffers only" | |
170 | ||
171 | config FB_LITTLE_ENDIAN | |
172 | bool "Support for Little-Endian framebuffers only" | |
173 | ||
174 | endchoice | |
175 | ||
09aaf268 AD |
176 | config FB_SYS_FOPS |
177 | tristate | |
178 | depends on FB | |
179 | default n | |
180 | ||
60b59bea JK |
181 | config FB_DEFERRED_IO |
182 | bool | |
183 | depends on FB | |
60b59bea | 184 | |
0e27aa3d JK |
185 | config FB_HECUBA |
186 | tristate | |
187 | depends on FB | |
188 | depends on FB_DEFERRED_IO | |
189 | ||
a268422d OZ |
190 | config FB_SVGALIB |
191 | tristate | |
192 | depends on FB | |
193 | default n | |
194 | ---help--- | |
195 | Common utility functions useful to fbdev drivers of VGA-based | |
196 | cards. | |
197 | ||
1da177e4 LT |
198 | config FB_MACMODES |
199 | tristate | |
200 | depends on FB | |
201 | default n | |
202 | ||
5474c120 | 203 | config FB_BACKLIGHT |
4b755999 MH |
204 | bool |
205 | depends on FB | |
206 | select BACKLIGHT_LCD_SUPPORT | |
207 | select BACKLIGHT_CLASS_DEVICE | |
208 | default n | |
5474c120 | 209 | |
1da177e4 LT |
210 | config FB_MODE_HELPERS |
211 | bool "Enable Video Mode Handling Helpers" | |
212 | depends on FB | |
213 | default n | |
214 | ---help--- | |
215 | This enables functions for handling video modes using the | |
216 | Generalized Timing Formula and the EDID parser. A few drivers rely | |
217 | on this feature such as the radeonfb, rivafb, and the i810fb. If | |
218 | your driver does not take advantage of this feature, choosing Y will | |
219 | just increase the kernel size by about 5K. | |
220 | ||
221 | config FB_TILEBLITTING | |
222 | bool "Enable Tile Blitting Support" | |
223 | depends on FB | |
224 | default n | |
225 | ---help--- | |
226 | This enables tile blitting. Tile blitting is a drawing technique | |
227 | where the screen is divided into rectangular sections (tiles), whereas | |
228 | the standard blitting divides the screen into pixels. Because the | |
229 | default drawing element is a tile, drawing functions will be passed | |
230 | parameters in terms of number of tiles instead of number of pixels. | |
231 | For example, to draw a single character, instead of using bitmaps, | |
232 | an index to an array of bitmaps will be used. To clear or move a | |
233 | rectangular section of a screen, the rectangle will be described in | |
234 | terms of number of tiles in the x- and y-axis. | |
235 | ||
236 | This is particularly important to one driver, matroxfb. If | |
237 | unsure, say N. | |
238 | ||
10ccaf4b | 239 | comment "Frame buffer hardware drivers" |
e0e34ef7 JS |
240 | depends on FB |
241 | ||
1da177e4 LT |
242 | config FB_CIRRUS |
243 | tristate "Cirrus Logic support" | |
244 | depends on FB && (ZORRO || PCI) | |
245 | select FB_CFB_FILLRECT | |
246 | select FB_CFB_COPYAREA | |
247 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
248 | ---help--- |
249 | This enables support for Cirrus Logic GD542x/543x based boards on | |
250 | Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. | |
251 | ||
252 | If you have a PCI-based system, this enables support for these | |
253 | chips: GD-543x, GD-544x, GD-5480. | |
254 | ||
255 | Please read the file <file:Documentation/fb/cirrusfb.txt>. | |
256 | ||
257 | Say N unless you have such a graphics board or plan to get one | |
258 | before you next recompile the kernel. | |
259 | ||
260 | config FB_PM2 | |
261 | tristate "Permedia2 support" | |
262 | depends on FB && ((AMIGA && BROKEN) || PCI) | |
263 | select FB_CFB_FILLRECT | |
264 | select FB_CFB_COPYAREA | |
265 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 266 | help |
4edad7f0 KH |
267 | This is the frame buffer device driver for cards based on |
268 | the 3D Labs Permedia, Permedia 2 and Permedia 2V chips. | |
269 | The driver was tested on the following cards: | |
270 | Diamond FireGL 1000 PRO AGP | |
271 | ELSA Gloria Synergy PCI | |
272 | Appian Jeronimo PRO (both heads) PCI | |
273 | 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI | |
274 | Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC | |
275 | ASK Graphic Blaster Exxtreme AGP | |
276 | ||
277 | To compile this driver as a module, choose M here: the | |
278 | module will be called pm2fb. | |
1da177e4 LT |
279 | |
280 | config FB_PM2_FIFO_DISCONNECT | |
281 | bool "enable FIFO disconnect feature" | |
282 | depends on FB_PM2 && PCI | |
283 | help | |
4edad7f0 | 284 | Support the Permedia2 FIFO disconnect feature. |
1da177e4 LT |
285 | |
286 | config FB_ARMCLCD | |
287 | tristate "ARM PrimeCell PL110 support" | |
288 | depends on FB && ARM && ARM_AMBA | |
289 | select FB_CFB_FILLRECT | |
290 | select FB_CFB_COPYAREA | |
291 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
292 | help |
293 | This framebuffer device driver is for the ARM PrimeCell PL110 | |
294 | Colour LCD controller. ARM PrimeCells provide the building | |
295 | blocks for System on a Chip devices. | |
296 | ||
297 | If you want to compile this as a module (=code which can be | |
298 | inserted into and removed from the running kernel), say M | |
39f5fb30 | 299 | here and read <file:Documentation/kbuild/modules.txt>. The module |
1da177e4 LT |
300 | will be called amba-clcd. |
301 | ||
903e2bbd MS |
302 | choice |
303 | ||
304 | depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) | |
305 | prompt "LCD Panel" | |
306 | default FB_ARMCLCD_SHARP_LQ035Q7DB02 | |
307 | ||
308 | config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT | |
309 | bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" | |
310 | help | |
311 | This is an implementation of the Sharp LQ035Q7DB02, a 3.5" | |
cab00891 | 312 | color QVGA, HRTFT panel. The LogicPD device includes |
903e2bbd MS |
313 | an integrated HRTFT controller IC. |
314 | The native resolution is 240x320. | |
315 | ||
316 | config FB_ARMCLCD_SHARP_LQ057Q3DC02 | |
317 | bool "LogicPD LCD 5.7\" QVGA" | |
318 | help | |
319 | This is an implementation of the Sharp LQ057Q3DC02, a 5.7" | |
320 | color QVGA, TFT panel. The LogicPD device includes an | |
321 | The native resolution is 320x240. | |
322 | ||
323 | config FB_ARMCLCD_SHARP_LQ64D343 | |
324 | bool "LogicPD LCD 6.4\" VGA" | |
325 | help | |
326 | This is an implementation of the Sharp LQ64D343, a 6.4" | |
327 | color VGA, TFT panel. The LogicPD device includes an | |
328 | The native resolution is 640x480. | |
329 | ||
330 | config FB_ARMCLCD_SHARP_LQ10D368 | |
331 | bool "LogicPD LCD 10.4\" VGA" | |
332 | help | |
333 | This is an implementation of the Sharp LQ10D368, a 10.4" | |
334 | color VGA, TFT panel. The LogicPD device includes an | |
335 | The native resolution is 640x480. | |
336 | ||
337 | ||
338 | config FB_ARMCLCD_SHARP_LQ121S1DG41 | |
339 | bool "LogicPD LCD 12.1\" SVGA" | |
340 | help | |
341 | This is an implementation of the Sharp LQ121S1DG41, a 12.1" | |
342 | color SVGA, TFT panel. The LogicPD device includes an | |
343 | The native resolution is 800x600. | |
344 | ||
345 | This panel requires a clock rate may be an integer fraction | |
346 | of the base LCDCLK frequency. The driver will select the | |
347 | highest frequency available that is lower than the maximum | |
348 | allowed. The panel may flicker if the clock rate is | |
349 | slower than the recommended minimum. | |
350 | ||
351 | config FB_ARMCLCD_AUO_A070VW01_WIDE | |
352 | bool "AU Optronics A070VW01 LCD 7.0\" WIDE" | |
353 | help | |
354 | This is an implementation of the AU Optronics, a 7.0" | |
355 | WIDE Color. The native resolution is 234x480. | |
356 | ||
357 | config FB_ARMCLCD_HITACHI | |
358 | bool "Hitachi Wide Screen 800x480" | |
359 | help | |
360 | This is an implementation of the Hitachi 800x480. | |
361 | ||
362 | endchoice | |
363 | ||
364 | ||
1da177e4 LT |
365 | config FB_ACORN |
366 | bool "Acorn VIDC support" | |
635f0258 | 367 | depends on (FB = y) && ARM && ARCH_ACORN |
1da177e4 LT |
368 | select FB_CFB_FILLRECT |
369 | select FB_CFB_COPYAREA | |
370 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
371 | help |
372 | This is the frame buffer device driver for the Acorn VIDC graphics | |
373 | hardware found in Acorn RISC PCs and other ARM-based machines. If | |
374 | unsure, say N. | |
375 | ||
376 | config FB_CLPS711X | |
377 | bool "CLPS711X LCD support" | |
378 | depends on (FB = y) && ARM && ARCH_CLPS711X | |
379 | select FB_CFB_FILLRECT | |
380 | select FB_CFB_COPYAREA | |
381 | select FB_CFB_IMAGEBLIT | |
e65c0850 RD |
382 | help |
383 | Say Y to enable the Framebuffer driver for the CLPS7111 and | |
384 | EP7212 processors. | |
1da177e4 LT |
385 | |
386 | config FB_SA1100 | |
387 | bool "SA-1100 LCD support" | |
388 | depends on (FB = y) && ARM && ARCH_SA1100 | |
389 | select FB_CFB_FILLRECT | |
390 | select FB_CFB_COPYAREA | |
391 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
392 | help |
393 | This is a framebuffer device for the SA-1100 LCD Controller. | |
394 | See <http://www.linux-fbdev.org/> for information on framebuffer | |
395 | devices. | |
396 | ||
397 | If you plan to use the LCD display with your SA-1100 system, say | |
398 | Y here. | |
399 | ||
7c2f891c SH |
400 | config FB_IMX |
401 | tristate "Motorola i.MX LCD support" | |
8c8fdbc9 | 402 | depends on FB && (ARCH_MX1 || ARCH_MX2) |
7c2f891c SH |
403 | select FB_CFB_FILLRECT |
404 | select FB_CFB_COPYAREA | |
405 | select FB_CFB_IMAGEBLIT | |
7c2f891c | 406 | |
1da177e4 LT |
407 | config FB_CYBER2000 |
408 | tristate "CyberPro 2000/2010/5000 support" | |
409 | depends on FB && PCI && (BROKEN || !SPARC64) | |
410 | select FB_CFB_FILLRECT | |
411 | select FB_CFB_COPYAREA | |
412 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
413 | help |
414 | This enables support for the Integraphics CyberPro 20x0 and 5000 | |
415 | VGA chips used in the Rebel.com Netwinder and other machines. | |
416 | Say Y if you have a NetWinder or a graphics card containing this | |
417 | device, otherwise say N. | |
418 | ||
419 | config FB_APOLLO | |
420 | bool | |
421 | depends on (FB = y) && APOLLO | |
422 | default y | |
423 | select FB_CFB_FILLRECT | |
424 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
425 | |
426 | config FB_Q40 | |
427 | bool | |
428 | depends on (FB = y) && Q40 | |
429 | default y | |
430 | select FB_CFB_FILLRECT | |
431 | select FB_CFB_COPYAREA | |
432 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
433 | |
434 | config FB_AMIGA | |
435 | tristate "Amiga native chipset support" | |
436 | depends on FB && AMIGA | |
1da177e4 LT |
437 | help |
438 | This is the frame buffer device driver for the builtin graphics | |
439 | chipset found in Amigas. | |
440 | ||
441 | To compile this driver as a module, choose M here: the | |
442 | module will be called amifb. | |
443 | ||
444 | config FB_AMIGA_OCS | |
445 | bool "Amiga OCS chipset support" | |
446 | depends on FB_AMIGA | |
447 | help | |
448 | This enables support for the original Agnus and Denise video chips, | |
449 | found in the Amiga 1000 and most A500's and A2000's. If you intend | |
450 | to run Linux on any of these systems, say Y; otherwise say N. | |
451 | ||
452 | config FB_AMIGA_ECS | |
453 | bool "Amiga ECS chipset support" | |
454 | depends on FB_AMIGA | |
455 | help | |
456 | This enables support for the Enhanced Chip Set, found in later | |
457 | A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If | |
458 | you intend to run Linux on any of these systems, say Y; otherwise | |
459 | say N. | |
460 | ||
461 | config FB_AMIGA_AGA | |
462 | bool "Amiga AGA chipset support" | |
463 | depends on FB_AMIGA | |
464 | help | |
465 | This enables support for the Advanced Graphics Architecture (also | |
466 | known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T | |
467 | and CD32. If you intend to run Linux on any of these systems, say Y; | |
468 | otherwise say N. | |
469 | ||
1da177e4 LT |
470 | config FB_FM2 |
471 | bool "Amiga FrameMaster II/Rainbow II support" | |
472 | depends on (FB = y) && ZORRO | |
473 | select FB_CFB_FILLRECT | |
474 | select FB_CFB_COPYAREA | |
475 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
476 | help |
477 | This is the frame buffer device driver for the Amiga FrameMaster | |
478 | card from BSC (exhibited 1992 but not shipped as a CBM product). | |
479 | ||
1154ea7d JK |
480 | config FB_ARC |
481 | tristate "Arc Monochrome LCD board support" | |
482 | depends on FB && X86 | |
922e6f9a AD |
483 | select FB_SYS_FILLRECT |
484 | select FB_SYS_COPYAREA | |
485 | select FB_SYS_IMAGEBLIT | |
d9a05f18 | 486 | select FB_SYS_FOPS |
1154ea7d JK |
487 | help |
488 | This enables support for the Arc Monochrome LCD board. The board | |
489 | is based on the KS-108 lcd controller and is typically a matrix | |
490 | of 2*n chips. This driver was tested with a 128x64 panel. This | |
491 | driver supports it for use with x86 SBCs through a 16 bit GPIO | |
09509603 | 492 | interface (8 bit data, 8 bit control). If you anticipate using |
1154ea7d JK |
493 | this driver, say Y or M; otherwise say N. You must specify the |
494 | GPIO IO address to be used for setting control and data. | |
495 | ||
1da177e4 LT |
496 | config FB_ATARI |
497 | bool "Atari native chipset support" | |
a1005012 MS |
498 | depends on (FB = y) && ATARI |
499 | select FB_CFB_FILLRECT | |
500 | select FB_CFB_COPYAREA | |
501 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
502 | help |
503 | This is the frame buffer device driver for the builtin graphics | |
504 | chipset found in Ataris. | |
505 | ||
506 | config FB_OF | |
507 | bool "Open Firmware frame buffer device support" | |
bed59275 | 508 | depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI) |
1da177e4 LT |
509 | select FB_CFB_FILLRECT |
510 | select FB_CFB_COPYAREA | |
511 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
512 | select FB_MACMODES |
513 | help | |
514 | Say Y if you want support with Open Firmware for your graphics | |
515 | board. | |
516 | ||
517 | config FB_CONTROL | |
518 | bool "Apple \"control\" display support" | |
a04b61d3 | 519 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
520 | select FB_CFB_FILLRECT |
521 | select FB_CFB_COPYAREA | |
522 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
523 | select FB_MACMODES |
524 | help | |
525 | This driver supports a frame buffer for the graphics adapter in the | |
526 | Power Macintosh 7300 and others. | |
527 | ||
528 | config FB_PLATINUM | |
529 | bool "Apple \"platinum\" display support" | |
a04b61d3 | 530 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
531 | select FB_CFB_FILLRECT |
532 | select FB_CFB_COPYAREA | |
533 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
534 | select FB_MACMODES |
535 | help | |
536 | This driver supports a frame buffer for the "platinum" graphics | |
537 | adapter in some Power Macintoshes. | |
538 | ||
539 | config FB_VALKYRIE | |
540 | bool "Apple \"valkyrie\" display support" | |
a04b61d3 | 541 | depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) |
1da177e4 LT |
542 | select FB_CFB_FILLRECT |
543 | select FB_CFB_COPYAREA | |
544 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
545 | select FB_MACMODES |
546 | help | |
547 | This driver supports a frame buffer for the "valkyrie" graphics | |
548 | adapter in some Power Macintoshes. | |
549 | ||
550 | config FB_CT65550 | |
551 | bool "Chips 65550 display support" | |
0f8c0234 | 552 | depends on (FB = y) && PPC32 && PCI |
1da177e4 LT |
553 | select FB_CFB_FILLRECT |
554 | select FB_CFB_COPYAREA | |
555 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
556 | help |
557 | This is the frame buffer device driver for the Chips & Technologies | |
558 | 65550 graphics chip in PowerBooks. | |
559 | ||
560 | config FB_ASILIANT | |
e65c0850 | 561 | bool "Asiliant (Chips) 69000 display support" |
1da177e4 LT |
562 | depends on (FB = y) && PCI |
563 | select FB_CFB_FILLRECT | |
564 | select FB_CFB_COPYAREA | |
565 | select FB_CFB_IMAGEBLIT | |
4de0b1ee AD |
566 | help |
567 | This is the frame buffer device driver for the Asiliant 69030 chipset | |
1da177e4 LT |
568 | |
569 | config FB_IMSTT | |
570 | bool "IMS Twin Turbo display support" | |
571 | depends on (FB = y) && PCI | |
572 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
573 | select FB_MACMODES if PPC |
574 | help | |
575 | The IMS Twin Turbo is a PCI-based frame buffer card bundled with | |
576 | many Macintosh and compatible computers. | |
577 | ||
1da177e4 LT |
578 | config FB_VGA16 |
579 | tristate "VGA 16-color graphics support" | |
580 | depends on FB && (X86 || PPC) | |
581 | select FB_CFB_FILLRECT | |
582 | select FB_CFB_COPYAREA | |
583 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 584 | select VGASTATE |
d60d2d8a | 585 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
1da177e4 LT |
586 | help |
587 | This is the frame buffer device driver for VGA 16 color graphic | |
588 | cards. Say Y if you have such a card. | |
589 | ||
590 | To compile this driver as a module, choose M here: the | |
591 | module will be called vga16fb. | |
592 | ||
e9fa7c43 MH |
593 | config FB_BF54X_LQ043 |
594 | tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)" | |
e7a05aa9 | 595 | depends on FB && (BF54x) && !BF542 |
e9fa7c43 MH |
596 | select FB_CFB_FILLRECT |
597 | select FB_CFB_COPYAREA | |
598 | select FB_CFB_IMAGEBLIT | |
599 | help | |
600 | This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD | |
601 | ||
99eeed47 MH |
602 | config FB_BFIN_T350MCQB |
603 | tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)" | |
604 | depends on FB && BLACKFIN | |
605 | select BFIN_GPTIMERS | |
606 | select FB_CFB_FILLRECT | |
607 | select FB_CFB_COPYAREA | |
608 | select FB_CFB_IMAGEBLIT | |
609 | help | |
610 | This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD | |
611 | This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI | |
612 | It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK. | |
613 | ||
614 | ||
1da177e4 LT |
615 | config FB_STI |
616 | tristate "HP STI frame buffer device support" | |
617 | depends on FB && PARISC | |
618 | select FB_CFB_FILLRECT | |
619 | select FB_CFB_COPYAREA | |
620 | select FB_CFB_IMAGEBLIT | |
17085a93 AB |
621 | select STI_CONSOLE |
622 | select VT | |
1da177e4 LT |
623 | default y |
624 | ---help--- | |
625 | STI refers to the HP "Standard Text Interface" which is a set of | |
626 | BIOS routines contained in a ROM chip in HP PA-RISC based machines. | |
627 | Enabling this option will implement the linux framebuffer device | |
628 | using calls to the STI BIOS routines for initialisation. | |
629 | ||
630 | If you enable this option, you will get a planar framebuffer device | |
631 | /dev/fb which will work on the most common HP graphic cards of the | |
632 | NGLE family, including the artist chips (in the 7xx and Bxxx series), | |
633 | HCRX, HCRX24, CRX, CRX24 and VisEG series. | |
634 | ||
635 | It is safe to enable this option, so you should probably say "Y". | |
636 | ||
637 | config FB_MAC | |
638 | bool "Generic Macintosh display support" | |
639 | depends on (FB = y) && MAC | |
640 | select FB_CFB_FILLRECT | |
641 | select FB_CFB_COPYAREA | |
642 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
643 | select FB_MACMODES |
644 | ||
1da177e4 LT |
645 | config FB_HP300 |
646 | bool | |
ad7e484f | 647 | depends on (FB = y) && DIO |
1da177e4 | 648 | select FB_CFB_IMAGEBLIT |
1da177e4 LT |
649 | default y |
650 | ||
651 | config FB_TGA | |
86c6f7d0 MR |
652 | tristate "TGA/SFB+ framebuffer support" |
653 | depends on FB && (ALPHA || TC) | |
1da177e4 LT |
654 | select FB_CFB_FILLRECT |
655 | select FB_CFB_COPYAREA | |
656 | select FB_CFB_IMAGEBLIT | |
1c667682 | 657 | select BITREVERSE |
86c6f7d0 MR |
658 | ---help--- |
659 | This is the frame buffer device driver for generic TGA and SFB+ | |
660 | graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, | |
661 | also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 | |
662 | TURBOchannel cards, also known as PMAGD-A, -B and -C. | |
663 | ||
664 | Due to hardware limitations ZLX-E2 and E3 cards are not supported | |
665 | for DECstation 5000/200 systems. Additionally due to firmware | |
666 | limitations these cards may cause troubles with booting DECstation | |
667 | 5000/240 and /260 systems, but are fully supported under Linux if | |
668 | you manage to get it going. ;-) | |
669 | ||
670 | Say Y if you have one of those. | |
1da177e4 | 671 | |
8bdb3a2d MJ |
672 | config FB_UVESA |
673 | tristate "Userspace VESA VGA graphics support" | |
674 | depends on FB && CONNECTOR | |
675 | select FB_CFB_FILLRECT | |
676 | select FB_CFB_COPYAREA | |
677 | select FB_CFB_IMAGEBLIT | |
678 | select FB_MODE_HELPERS | |
679 | help | |
680 | This is the frame buffer driver for generic VBE 2.0 compliant | |
681 | graphic cards. It can also take advantage of VBE 3.0 features, | |
682 | such as refresh rate adjustment. | |
683 | ||
684 | This driver generally provides more features than vesafb but | |
685 | requires a userspace helper application called 'v86d'. See | |
686 | <file:Documentation/fb/uvesafb.txt> for more information. | |
687 | ||
688 | If unsure, say N. | |
689 | ||
1da177e4 LT |
690 | config FB_VESA |
691 | bool "VESA VGA graphics support" | |
0d078f6f | 692 | depends on (FB = y) && X86 |
1da177e4 LT |
693 | select FB_CFB_FILLRECT |
694 | select FB_CFB_COPYAREA | |
695 | select FB_CFB_IMAGEBLIT | |
4d31a2b7 | 696 | select FB_BOOT_VESA_SUPPORT |
1da177e4 LT |
697 | help |
698 | This is the frame buffer device driver for generic VESA 2.0 | |
699 | compliant graphic cards. The older VESA 1.2 cards are not supported. | |
700 | You will get a boot time penguin logo at no additional cost. Please | |
701 | read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. | |
702 | ||
7c83172b HY |
703 | config FB_EFI |
704 | bool "EFI-based Framebuffer Support" | |
b64ef8af | 705 | depends on (FB = y) && X86 && EFI |
90b4f9ac EH |
706 | select FB_CFB_FILLRECT |
707 | select FB_CFB_COPYAREA | |
708 | select FB_CFB_IMAGEBLIT | |
709 | help | |
7c08c9ae PJ |
710 | This is the EFI frame buffer device driver. If the firmware on |
711 | your platform is EFI 1.10 or UEFI 2.0, select Y to add support for | |
712 | using the EFI framebuffer as your console. | |
90b4f9ac | 713 | |
0e27aa3d JK |
714 | config FB_N411 |
715 | tristate "N411 Apollo/Hecuba devkit support" | |
aad09e51 | 716 | depends on FB && X86 && MMU |
d6774935 AD |
717 | select FB_SYS_FILLRECT |
718 | select FB_SYS_COPYAREA | |
719 | select FB_SYS_IMAGEBLIT | |
28d4564b | 720 | select FB_SYS_FOPS |
aad09e51 | 721 | select FB_DEFERRED_IO |
0e27aa3d | 722 | select FB_HECUBA |
aad09e51 | 723 | help |
0e27aa3d JK |
724 | This enables support for the Apollo display controller in its |
725 | Hecuba form using the n411 devkit. | |
aad09e51 | 726 | |
1da177e4 LT |
727 | config FB_HGA |
728 | tristate "Hercules mono graphics support" | |
729 | depends on FB && X86 | |
730 | select FB_CFB_FILLRECT | |
731 | select FB_CFB_COPYAREA | |
732 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
733 | help |
734 | Say Y here if you have a Hercules mono graphics card. | |
735 | ||
736 | To compile this driver as a module, choose M here: the | |
737 | module will be called hgafb. | |
738 | ||
739 | As this card technology is 15 years old, most people will answer N | |
740 | here. | |
741 | ||
742 | config FB_HGA_ACCEL | |
743 | bool "Hercules mono Acceleration functions (EXPERIMENTAL)" | |
744 | depends on FB_HGA && EXPERIMENTAL | |
745 | ---help--- | |
746 | This will compile the Hercules mono graphics with | |
747 | acceleration functions. | |
748 | ||
1da177e4 LT |
749 | config FB_SGIVW |
750 | tristate "SGI Visual Workstation framebuffer support" | |
751 | depends on FB && X86_VISWS | |
752 | select FB_CFB_FILLRECT | |
753 | select FB_CFB_COPYAREA | |
754 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
755 | help |
756 | SGI Visual Workstation support for framebuffer graphics. | |
757 | ||
758 | config FB_GBE | |
759 | bool "SGI Graphics Backend frame buffer support" | |
760 | depends on (FB = y) && (SGI_IP32 || X86_VISWS) | |
761 | select FB_CFB_FILLRECT | |
762 | select FB_CFB_COPYAREA | |
763 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
764 | help |
765 | This is the frame buffer device driver for SGI Graphics Backend. | |
766 | This chip is used in SGI O2 and Visual Workstation 320/540. | |
767 | ||
768 | config FB_GBE_MEM | |
769 | int "Video memory size in MB" | |
770 | depends on FB_GBE | |
80c410dc | 771 | default 4 |
1da177e4 LT |
772 | help |
773 | This is the amount of memory reserved for the framebuffer, | |
774 | which can be any value between 1MB and 8MB. | |
775 | ||
1a571986 MF |
776 | config FB_SBUS |
777 | bool "SBUS and UPA framebuffers" | |
0b57ee9e | 778 | depends on (FB = y) && SPARC |
1a571986 MF |
779 | help |
780 | Say Y if you want support for SBUS or UPA based frame buffer device. | |
781 | ||
1da177e4 LT |
782 | config FB_BW2 |
783 | bool "BWtwo support" | |
e019630e | 784 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
785 | select FB_CFB_FILLRECT |
786 | select FB_CFB_COPYAREA | |
787 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
788 | help |
789 | This is the frame buffer device driver for the BWtwo frame buffer. | |
790 | ||
791 | config FB_CG3 | |
792 | bool "CGthree support" | |
e019630e | 793 | depends on (FB = y) && (SPARC && FB_SBUS) |
1a571986 | 794 | select FB_CFB_FILLRECT |
1da177e4 LT |
795 | select FB_CFB_COPYAREA |
796 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
797 | help |
798 | This is the frame buffer device driver for the CGthree frame buffer. | |
799 | ||
800 | config FB_CG6 | |
801 | bool "CGsix (GX,TurboGX) support" | |
e019630e | 802 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
803 | select FB_CFB_COPYAREA |
804 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
805 | help |
806 | This is the frame buffer device driver for the CGsix (GX, TurboGX) | |
807 | frame buffer. | |
808 | ||
8d74c1fd KH |
809 | config FB_FFB |
810 | bool "Creator/Creator3D/Elite3D support" | |
811 | depends on FB_SBUS && SPARC64 | |
812 | select FB_CFB_COPYAREA | |
813 | select FB_CFB_IMAGEBLIT | |
814 | help | |
815 | This is the frame buffer device driver for the Creator, Creator3D, | |
816 | and Elite3D graphics boards. | |
817 | ||
818 | config FB_TCX | |
819 | bool "TCX (SS4/SS5 only) support" | |
820 | depends on FB_SBUS | |
821 | select FB_CFB_FILLRECT | |
822 | select FB_CFB_COPYAREA | |
823 | select FB_CFB_IMAGEBLIT | |
824 | help | |
825 | This is the frame buffer device driver for the TCX 24/8bit frame | |
826 | buffer. | |
827 | ||
828 | config FB_CG14 | |
829 | bool "CGfourteen (SX) support" | |
830 | depends on FB_SBUS | |
831 | select FB_CFB_FILLRECT | |
832 | select FB_CFB_COPYAREA | |
833 | select FB_CFB_IMAGEBLIT | |
834 | help | |
835 | This is the frame buffer device driver for the CGfourteen frame | |
836 | buffer on Desktop SPARCsystems with the SX graphics option. | |
837 | ||
838 | config FB_P9100 | |
839 | bool "P9100 (Sparcbook 3 only) support" | |
840 | depends on FB_SBUS | |
841 | select FB_CFB_FILLRECT | |
842 | select FB_CFB_COPYAREA | |
843 | select FB_CFB_IMAGEBLIT | |
844 | help | |
845 | This is the frame buffer device driver for the P9100 card | |
846 | supported on Sparcbook 3 machines. | |
847 | ||
848 | config FB_LEO | |
849 | bool "Leo (ZX) support" | |
850 | depends on FB_SBUS | |
851 | select FB_CFB_FILLRECT | |
852 | select FB_CFB_COPYAREA | |
853 | select FB_CFB_IMAGEBLIT | |
854 | help | |
855 | This is the frame buffer device driver for the SBUS-based Sun ZX | |
856 | (leo) frame buffer cards. | |
857 | ||
858 | config FB_IGA | |
859 | bool "IGA 168x display support" | |
e11a6c23 | 860 | depends on (FB = y) && SPARC32 |
8d74c1fd KH |
861 | select FB_CFB_FILLRECT |
862 | select FB_CFB_COPYAREA | |
863 | select FB_CFB_IMAGEBLIT | |
864 | help | |
865 | This is the framebuffer device for the INTERGRAPHICS 1680 and | |
866 | successor frame buffer cards. | |
867 | ||
868 | config FB_XVR500 | |
869 | bool "Sun XVR-500 3DLABS Wildcat support" | |
e11a6c23 | 870 | depends on (FB = y) && PCI && SPARC64 |
8d74c1fd KH |
871 | select FB_CFB_FILLRECT |
872 | select FB_CFB_COPYAREA | |
873 | select FB_CFB_IMAGEBLIT | |
874 | help | |
875 | This is the framebuffer device for the Sun XVR-500 and similar | |
876 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
01dd2fbf | 877 | only works on sparc64 systems where the system firmware has |
8d74c1fd KH |
878 | mostly initialized the card already. It is treated as a |
879 | completely dumb framebuffer device. | |
880 | ||
881 | config FB_XVR2500 | |
882 | bool "Sun XVR-2500 3DLABS Wildcat support" | |
e11a6c23 | 883 | depends on (FB = y) && PCI && SPARC64 |
8d74c1fd KH |
884 | select FB_CFB_FILLRECT |
885 | select FB_CFB_COPYAREA | |
886 | select FB_CFB_IMAGEBLIT | |
887 | help | |
888 | This is the framebuffer device for the Sun XVR-2500 and similar | |
889 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
01dd2fbf | 890 | only works on sparc64 systems where the system firmware has |
8d74c1fd KH |
891 | mostly initialized the card already. It is treated as a |
892 | completely dumb framebuffer device. | |
893 | ||
1da177e4 LT |
894 | config FB_PVR2 |
895 | tristate "NEC PowerVR 2 display support" | |
896 | depends on FB && SH_DREAMCAST | |
897 | select FB_CFB_FILLRECT | |
898 | select FB_CFB_COPYAREA | |
899 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
900 | ---help--- |
901 | Say Y here if you have a PowerVR 2 card in your box. If you plan to | |
902 | run linux on your Dreamcast, you will have to say Y here. | |
903 | This driver may or may not work on other PowerVR 2 cards, but is | |
904 | totally untested. Use at your own risk. If unsure, say N. | |
905 | ||
906 | To compile this driver as a module, choose M here: the | |
907 | module will be called pvr2fb. | |
908 | ||
909 | You can pass several parameters to the driver at boot time or at | |
910 | module load time. The parameters look like "video=pvr2:XXX", where | |
911 | the meaning of XXX can be found at the end of the main source file | |
912 | (<file:drivers/video/pvr2fb.c>). Please see the file | |
913 | <file:Documentation/fb/pvr2fb.txt>. | |
914 | ||
915 | config FB_EPSON1355 | |
916 | bool "Epson 1355 framebuffer support" | |
1a3f2881 | 917 | depends on (FB = y) && ARCH_CEIVA |
1da177e4 LT |
918 | select FB_CFB_FILLRECT |
919 | select FB_CFB_COPYAREA | |
920 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
921 | help |
922 | Build in support for the SED1355 Epson Research Embedded RAMDAC | |
923 | LCD/CRT Controller (since redesignated as the S1D13505) as a | |
924 | framebuffer. Product specs at | |
925 | <http://www.erd.epson.com/vdc/html/products.htm>. | |
926 | ||
ecc41d5e RD |
927 | config FB_S1D13XXX |
928 | tristate "Epson S1D13XXX framebuffer support" | |
929 | depends on FB | |
930 | select FB_CFB_FILLRECT | |
931 | select FB_CFB_COPYAREA | |
932 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
933 | help |
934 | Support for S1D13XXX framebuffer device family (currently only | |
935 | working with S1D13806). Product specs at | |
936 | <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> | |
937 | ||
14340586 NF |
938 | config FB_ATMEL |
939 | tristate "AT91/AT32 LCD Controller support" | |
915190f7 | 940 | depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32) |
14340586 NF |
941 | select FB_CFB_FILLRECT |
942 | select FB_CFB_COPYAREA | |
943 | select FB_CFB_IMAGEBLIT | |
944 | help | |
945 | This enables support for the AT91/AT32 LCD Controller. | |
946 | ||
947 | config FB_INTSRAM | |
948 | bool "Frame Buffer in internal SRAM" | |
949 | depends on FB_ATMEL && ARCH_AT91SAM9261 | |
950 | help | |
951 | Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want | |
952 | to let frame buffer in external SDRAM. | |
953 | ||
250a269d NF |
954 | config FB_ATMEL_STN |
955 | bool "Use a STN display with AT91/AT32 LCD Controller" | |
915190f7 | 956 | depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK) |
250a269d NF |
957 | default n |
958 | help | |
959 | Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD | |
960 | Controller. Say N if you want to connect a TFT. | |
961 | ||
962 | If unsure, say N. | |
963 | ||
1da177e4 LT |
964 | config FB_NVIDIA |
965 | tristate "nVidia Framebuffer Support" | |
966 | depends on FB && PCI | |
e0e34ef7 | 967 | select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT |
1da177e4 LT |
968 | select FB_MODE_HELPERS |
969 | select FB_CFB_FILLRECT | |
970 | select FB_CFB_COPYAREA | |
971 | select FB_CFB_IMAGEBLIT | |
1c667682 | 972 | select BITREVERSE |
b2f594fd | 973 | select VGASTATE |
1da177e4 LT |
974 | help |
975 | This driver supports graphics boards with the nVidia chips, TNT | |
976 | and newer. For very old chipsets, such as the RIVA128, then use | |
977 | the rivafb. | |
978 | Say Y if you have such a graphics board. | |
979 | ||
980 | To compile this driver as a module, choose M here: the | |
981 | module will be called nvidiafb. | |
982 | ||
983 | config FB_NVIDIA_I2C | |
984 | bool "Enable DDC Support" | |
85f1503a | 985 | depends on FB_NVIDIA |
166f60dd | 986 | select FB_DDC |
1da177e4 LT |
987 | help |
988 | This enables I2C support for nVidia Chipsets. This is used | |
989 | only for getting EDID information from the attached display | |
990 | allowing for robust video mode handling and switching. | |
991 | ||
992 | Because fbdev-2.6 requires that drivers must be able to | |
993 | independently validate video mode parameters, you should say Y | |
994 | here. | |
995 | ||
647f2e7a JD |
996 | config FB_NVIDIA_DEBUG |
997 | bool "Lots of debug output" | |
998 | depends on FB_NVIDIA | |
999 | default n | |
1000 | help | |
1001 | Say Y here if you want the nVidia driver to output all sorts | |
1002 | of debugging information to provide to the maintainer when | |
1003 | something goes wrong. | |
1004 | ||
5474c120 MH |
1005 | config FB_NVIDIA_BACKLIGHT |
1006 | bool "Support for backlight control" | |
e0e34ef7 | 1007 | depends on FB_NVIDIA |
5474c120 MH |
1008 | default y |
1009 | help | |
1010 | Say Y here if you want to control the backlight of your display. | |
1011 | ||
1da177e4 LT |
1012 | config FB_RIVA |
1013 | tristate "nVidia Riva support" | |
1014 | depends on FB && PCI | |
e0e34ef7 | 1015 | select FB_BACKLIGHT if FB_RIVA_BACKLIGHT |
1da177e4 LT |
1016 | select FB_MODE_HELPERS |
1017 | select FB_CFB_FILLRECT | |
1018 | select FB_CFB_COPYAREA | |
1019 | select FB_CFB_IMAGEBLIT | |
1c667682 | 1020 | select BITREVERSE |
b2f594fd | 1021 | select VGASTATE |
1da177e4 LT |
1022 | help |
1023 | This driver supports graphics boards with the nVidia Riva/Geforce | |
1024 | chips. | |
1025 | Say Y if you have such a graphics board. | |
1026 | ||
1027 | To compile this driver as a module, choose M here: the | |
1028 | module will be called rivafb. | |
1029 | ||
1030 | config FB_RIVA_I2C | |
1031 | bool "Enable DDC Support" | |
1032 | depends on FB_RIVA | |
166f60dd | 1033 | select FB_DDC |
1da177e4 LT |
1034 | help |
1035 | This enables I2C support for nVidia Chipsets. This is used | |
1036 | only for getting EDID information from the attached display | |
1037 | allowing for robust video mode handling and switching. | |
1038 | ||
1039 | Because fbdev-2.6 requires that drivers must be able to | |
1040 | independently validate video mode parameters, you should say Y | |
1041 | here. | |
1042 | ||
1043 | config FB_RIVA_DEBUG | |
647f2e7a | 1044 | bool "Lots of debug output" |
1da177e4 LT |
1045 | depends on FB_RIVA |
1046 | default n | |
1047 | help | |
1048 | Say Y here if you want the Riva driver to output all sorts | |
09509603 | 1049 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1050 | something goes wrong. |
1051 | ||
5474c120 MH |
1052 | config FB_RIVA_BACKLIGHT |
1053 | bool "Support for backlight control" | |
e0e34ef7 | 1054 | depends on FB_RIVA |
5474c120 MH |
1055 | default y |
1056 | help | |
1057 | Say Y here if you want to control the backlight of your display. | |
1058 | ||
1da177e4 LT |
1059 | config FB_I810 |
1060 | tristate "Intel 810/815 support (EXPERIMENTAL)" | |
a1a5c3b9 | 1061 | depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL |
1da177e4 LT |
1062 | select FB_MODE_HELPERS |
1063 | select FB_CFB_FILLRECT | |
1064 | select FB_CFB_COPYAREA | |
1065 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1066 | select VGASTATE |
1da177e4 LT |
1067 | help |
1068 | This driver supports the on-board graphics built in to the Intel 810 | |
1069 | and 815 chipsets. Say Y if you have and plan to use such a board. | |
1070 | ||
1071 | To compile this driver as a module, choose M here: the | |
1072 | module will be called i810fb. | |
1073 | ||
1074 | For more information, please read | |
1075 | <file:Documentation/fb/intel810.txt> | |
1076 | ||
1077 | config FB_I810_GTF | |
1078 | bool "use VESA Generalized Timing Formula" | |
1079 | depends on FB_I810 | |
1080 | help | |
1081 | If you say Y, then the VESA standard, Generalized Timing Formula | |
1082 | or GTF, will be used to calculate the required video timing values | |
1083 | per video mode. Since the GTF allows nondiscrete timings | |
1084 | (nondiscrete being a range of values as opposed to discrete being a | |
1085 | set of values), you'll be able to use any combination of horizontal | |
1086 | and vertical resolutions, and vertical refresh rates without having | |
1087 | to specify your own timing parameters. This is especially useful | |
1088 | to maximize the performance of an aging display, or if you just | |
1089 | have a display with nonstandard dimensions. A VESA compliant | |
1090 | monitor is recommended, but can still work with non-compliant ones. | |
1091 | If you need or want this, then select this option. The timings may | |
1092 | not be compliant with Intel's recommended values. Use at your own | |
1093 | risk. | |
1094 | ||
1095 | If you say N, the driver will revert to discrete video timings | |
1096 | using a set recommended by Intel in their documentation. | |
1097 | ||
1098 | If unsure, say N. | |
1099 | ||
74f6ae84 AD |
1100 | config FB_I810_I2C |
1101 | bool "Enable DDC Support" | |
db84502b | 1102 | depends on FB_I810 && FB_I810_GTF |
e80987f8 | 1103 | select FB_DDC |
74f6ae84 AD |
1104 | help |
1105 | ||
dbe7e429 AH |
1106 | config FB_LE80578 |
1107 | tristate "Intel LE80578 (Vermilion) support" | |
1108 | depends on FB && PCI && X86 | |
1109 | select FB_MODE_HELPERS | |
1110 | select FB_CFB_FILLRECT | |
1111 | select FB_CFB_COPYAREA | |
1112 | select FB_CFB_IMAGEBLIT | |
1113 | help | |
1114 | This driver supports the LE80578 (Vermilion Range) chipset | |
1115 | ||
1116 | config FB_CARILLO_RANCH | |
1117 | tristate "Intel Carillo Ranch support" | |
1118 | depends on FB_LE80578 && FB && PCI && X86 | |
1119 | help | |
1120 | This driver supports the LE80578 (Carillo Ranch) board | |
1121 | ||
1da177e4 | 1122 | config FB_INTEL |
0e170c72 | 1123 | tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" |
ba0ab823 | 1124 | depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED |
1da177e4 LT |
1125 | select FB_MODE_HELPERS |
1126 | select FB_CFB_FILLRECT | |
1127 | select FB_CFB_COPYAREA | |
1128 | select FB_CFB_IMAGEBLIT | |
4b198289 | 1129 | select FB_BOOT_VESA_SUPPORT if FB_INTEL = y |
ba0ab823 | 1130 | depends on !DRM_I915 |
1da177e4 LT |
1131 | help |
1132 | This driver supports the on-board graphics built in to the Intel | |
0e170c72 | 1133 | 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. |
1da177e4 LT |
1134 | Say Y if you have and plan to use such a board. |
1135 | ||
4b198289 KH |
1136 | To make FB_INTELFB=Y work you need to say AGP_INTEL=y too. |
1137 | ||
1f6e8449 | 1138 | To compile this driver as a module, choose M here: the |
1da177e4 LT |
1139 | module will be called intelfb. |
1140 | ||
d463d34e CM |
1141 | For more information, please read <file:Documentation/fb/intelfb.txt> |
1142 | ||
1da177e4 | 1143 | config FB_INTEL_DEBUG |
1f6e8449 | 1144 | bool "Intel driver Debug Messages" |
1da177e4 LT |
1145 | depends on FB_INTEL |
1146 | ---help--- | |
1147 | Say Y here if you want the Intel driver to output all sorts | |
09509603 | 1148 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1149 | something goes wrong. |
1150 | ||
1f6e8449 DM |
1151 | config FB_INTEL_I2C |
1152 | bool "DDC/I2C for Intel framebuffer support" | |
1153 | depends on FB_INTEL | |
166f60dd | 1154 | select FB_DDC |
1f6e8449 DM |
1155 | default y |
1156 | help | |
1157 | Say Y here if you want DDC/I2C support for your on-board Intel graphics. | |
1158 | ||
1da177e4 LT |
1159 | config FB_MATROX |
1160 | tristate "Matrox acceleration" | |
1161 | depends on FB && PCI | |
1162 | select FB_CFB_FILLRECT | |
1163 | select FB_CFB_COPYAREA | |
1164 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1165 | select FB_TILEBLITTING |
1166 | select FB_MACMODES if PPC_PMAC | |
1167 | ---help--- | |
1168 | Say Y here if you have a Matrox Millennium, Matrox Millennium II, | |
1169 | Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox | |
1170 | Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, | |
1171 | Matrox G400, G450 or G550 card in your box. | |
1172 | ||
1173 | To compile this driver as a module, choose M here: the | |
1174 | module will be called matroxfb. | |
1175 | ||
1176 | You can pass several parameters to the driver at boot time or at | |
1177 | module load time. The parameters look like "video=matrox:XXX", and | |
1178 | are described in <file:Documentation/fb/matroxfb.txt>. | |
1179 | ||
1180 | config FB_MATROX_MILLENIUM | |
1181 | bool "Millennium I/II support" | |
1182 | depends on FB_MATROX | |
1183 | help | |
1184 | Say Y here if you have a Matrox Millennium or Matrox Millennium II | |
1185 | video card. If you select "Advanced lowlevel driver options" below, | |
1186 | you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp | |
1187 | packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can | |
1188 | also use font widths different from 8. | |
1189 | ||
1190 | config FB_MATROX_MYSTIQUE | |
1191 | bool "Mystique support" | |
1192 | depends on FB_MATROX | |
1193 | help | |
1194 | Say Y here if you have a Matrox Mystique or Matrox Mystique 220 | |
1195 | video card. If you select "Advanced lowlevel driver options" below, | |
1196 | you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp | |
1197 | packed pixel and 32 bpp packed pixel. You can also use font widths | |
1198 | different from 8. | |
1199 | ||
1200 | config FB_MATROX_G | |
1201 | bool "G100/G200/G400/G450/G550 support" | |
1202 | depends on FB_MATROX | |
1203 | ---help--- | |
1204 | Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based | |
1205 | video card. If you select "Advanced lowlevel driver options", you | |
1206 | should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed | |
1207 | pixel and 32 bpp packed pixel. You can also use font widths | |
1208 | different from 8. | |
1209 | ||
ee83126b JD |
1210 | If you need support for G400 secondary head, you must say Y to |
1211 | "Matrox I2C support" and "G400 second head support" right below. | |
1212 | G450/G550 secondary head and digital output are supported without | |
1213 | additional modules. | |
1da177e4 LT |
1214 | |
1215 | The driver starts in monitor mode. You must use the matroxset tool | |
1216 | (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to | |
1217 | swap primary and secondary head outputs, or to change output mode. | |
1218 | Secondary head driver always start in 640x480 resolution and you | |
1219 | must use fbset to change it. | |
1220 | ||
1221 | Do not forget that second head supports only 16 and 32 bpp | |
1222 | packed pixels, so it is a good idea to compile them into the kernel | |
1223 | too. You can use only some font widths, as the driver uses generic | |
1224 | painting procedures (the secondary head does not use acceleration | |
1225 | engine). | |
1226 | ||
1227 | G450/G550 hardware can display TV picture only from secondary CRTC, | |
1228 | and it performs no scaling, so picture must have 525 or 625 lines. | |
1229 | ||
1230 | config FB_MATROX_I2C | |
1231 | tristate "Matrox I2C support" | |
166f60dd JS |
1232 | depends on FB_MATROX |
1233 | select FB_DDC | |
1da177e4 LT |
1234 | ---help--- |
1235 | This drivers creates I2C buses which are needed for accessing the | |
1236 | DDC (I2C) bus present on all Matroxes, an I2C bus which | |
1237 | interconnects Matrox optional devices, like MGA-TVO on G200 and | |
1238 | G400, and the secondary head DDC bus, present on G400 only. | |
1239 | ||
1240 | You can say Y or M here if you want to experiment with monitor | |
1241 | detection code. You must say Y or M here if you want to use either | |
1242 | second head of G400 or MGA-TVO on G200 or G400. | |
1243 | ||
1244 | If you compile it as module, it will create a module named | |
1245 | i2c-matroxfb. | |
1246 | ||
1247 | config FB_MATROX_MAVEN | |
1248 | tristate "G400 second head support" | |
1249 | depends on FB_MATROX_G && FB_MATROX_I2C | |
1250 | ---help--- | |
1251 | WARNING !!! This support does not work with G450 !!! | |
1252 | ||
1253 | Say Y or M here if you want to use a secondary head (meaning two | |
1254 | monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary | |
1255 | head is not compatible with accelerated XFree 3.3.x SVGA servers - | |
1256 | secondary head output is blanked while you are in X. With XFree | |
1257 | 3.9.17 preview you can use both heads if you use SVGA over fbdev or | |
1258 | the fbdev driver on first head and the fbdev driver on second head. | |
1259 | ||
1260 | If you compile it as module, two modules are created, | |
1261 | matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for | |
1262 | both G200 and G400, matroxfb_crtc2 is needed only by G400. You must | |
1263 | also load i2c-matroxfb to get it to run. | |
1264 | ||
1265 | The driver starts in monitor mode and you must use the matroxset | |
1266 | tool (available at | |
1267 | <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to | |
1268 | PAL or NTSC or to swap primary and secondary head outputs. | |
1269 | Secondary head driver also always start in 640x480 resolution, you | |
1270 | must use fbset to change it. | |
1271 | ||
1272 | Also do not forget that second head supports only 16 and 32 bpp | |
1273 | packed pixels, so it is a good idea to compile them into the kernel | |
1274 | too. You can use only some font widths, as the driver uses generic | |
1275 | painting procedures (the secondary head does not use acceleration | |
1276 | engine). | |
1277 | ||
1da177e4 LT |
1278 | config FB_RADEON |
1279 | tristate "ATI Radeon display support" | |
1280 | depends on FB && PCI | |
e0e34ef7 | 1281 | select FB_BACKLIGHT if FB_RADEON_BACKLIGHT |
1da177e4 LT |
1282 | select FB_MODE_HELPERS |
1283 | select FB_CFB_FILLRECT | |
1284 | select FB_CFB_COPYAREA | |
1285 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1286 | select FB_MACMODES if PPC_OF |
1287 | help | |
1288 | Choose this option if you want to use an ATI Radeon graphics card as | |
1289 | a framebuffer device. There are both PCI and AGP versions. You | |
1290 | don't need to choose this to run the Radeon in plain VGA mode. | |
1291 | ||
1da177e4 | 1292 | There is a product page at |
f510a3c3 | 1293 | http://apps.ati.com/ATIcompare/ |
5474c120 | 1294 | |
1da177e4 LT |
1295 | config FB_RADEON_I2C |
1296 | bool "DDC/I2C for ATI Radeon support" | |
1297 | depends on FB_RADEON | |
166f60dd | 1298 | select FB_DDC |
1da177e4 LT |
1299 | default y |
1300 | help | |
1301 | Say Y here if you want DDC/I2C support for your Radeon board. | |
1302 | ||
5474c120 MH |
1303 | config FB_RADEON_BACKLIGHT |
1304 | bool "Support for backlight control" | |
e0e34ef7 | 1305 | depends on FB_RADEON |
5474c120 MH |
1306 | default y |
1307 | help | |
1308 | Say Y here if you want to control the backlight of your display. | |
1309 | ||
1da177e4 LT |
1310 | config FB_RADEON_DEBUG |
1311 | bool "Lots of debug output from Radeon driver" | |
1312 | depends on FB_RADEON | |
1313 | default n | |
1314 | help | |
1315 | Say Y here if you want the Radeon driver to output all sorts | |
09509603 | 1316 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1317 | something goes wrong. |
1318 | ||
1319 | config FB_ATY128 | |
1320 | tristate "ATI Rage128 display support" | |
1321 | depends on FB && PCI | |
1322 | select FB_CFB_FILLRECT | |
1323 | select FB_CFB_COPYAREA | |
1324 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1325 | select FB_BACKLIGHT if FB_ATY128_BACKLIGHT |
1da177e4 LT |
1326 | select FB_MACMODES if PPC_PMAC |
1327 | help | |
1328 | This driver supports graphics boards with the ATI Rage128 chips. | |
1329 | Say Y if you have such a graphics board and read | |
1330 | <file:Documentation/fb/aty128fb.txt>. | |
1331 | ||
1332 | To compile this driver as a module, choose M here: the | |
1333 | module will be called aty128fb. | |
1334 | ||
5474c120 MH |
1335 | config FB_ATY128_BACKLIGHT |
1336 | bool "Support for backlight control" | |
e0e34ef7 | 1337 | depends on FB_ATY128 |
5474c120 MH |
1338 | default y |
1339 | help | |
1340 | Say Y here if you want to control the backlight of your display. | |
1341 | ||
1da177e4 LT |
1342 | config FB_ATY |
1343 | tristate "ATI Mach64 display support" if PCI || ATARI | |
f2e782ef | 1344 | depends on FB && !SPARC32 |
1da177e4 LT |
1345 | select FB_CFB_FILLRECT |
1346 | select FB_CFB_COPYAREA | |
1347 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1348 | select FB_BACKLIGHT if FB_ATY_BACKLIGHT |
1da177e4 LT |
1349 | select FB_MACMODES if PPC |
1350 | help | |
1351 | This driver supports graphics boards with the ATI Mach64 chips. | |
1352 | Say Y if you have such a graphics board. | |
1353 | ||
1354 | To compile this driver as a module, choose M here: the | |
1355 | module will be called atyfb. | |
1356 | ||
1357 | config FB_ATY_CT | |
1358 | bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" | |
1359 | depends on PCI && FB_ATY | |
8d74c1fd | 1360 | default y if SPARC64 && PCI |
1da177e4 LT |
1361 | help |
1362 | Say Y here to support use of ATI's 64-bit Rage boards (or other | |
1363 | boards based on the Mach64 CT, VT, GT, and LT chipsets) as a | |
1364 | framebuffer device. The ATI product support page for these boards | |
1365 | is at <http://support.ati.com/products/pc/mach64/>. | |
1366 | ||
1367 | config FB_ATY_GENERIC_LCD | |
1368 | bool "Mach64 generic LCD support (EXPERIMENTAL)" | |
1369 | depends on FB_ATY_CT | |
1370 | help | |
1371 | Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, | |
1372 | Rage XC, or Rage XL chipset. | |
1373 | ||
1da177e4 LT |
1374 | config FB_ATY_GX |
1375 | bool "Mach64 GX support" if PCI | |
1376 | depends on FB_ATY | |
1377 | default y if ATARI | |
1378 | help | |
1379 | Say Y here to support use of the ATI Mach64 Graphics Expression | |
1380 | board (or other boards based on the Mach64 GX chipset) as a | |
1381 | framebuffer device. The ATI product support page for these boards | |
1382 | is at | |
1383 | <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. | |
1384 | ||
5474c120 MH |
1385 | config FB_ATY_BACKLIGHT |
1386 | bool "Support for backlight control" | |
e0e34ef7 | 1387 | depends on FB_ATY |
5474c120 MH |
1388 | default y |
1389 | help | |
1390 | Say Y here if you want to control the backlight of your display. | |
1391 | ||
a268422d OZ |
1392 | config FB_S3 |
1393 | tristate "S3 Trio/Virge support" | |
1394 | depends on FB && PCI | |
1395 | select FB_CFB_FILLRECT | |
1396 | select FB_CFB_COPYAREA | |
1397 | select FB_CFB_IMAGEBLIT | |
1398 | select FB_TILEBLITTING | |
1399 | select FB_SVGALIB | |
b2f594fd | 1400 | select VGASTATE |
8db51668 | 1401 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
a268422d OZ |
1402 | ---help--- |
1403 | Driver for graphics boards with S3 Trio / S3 Virge chip. | |
1404 | ||
1da177e4 LT |
1405 | config FB_SAVAGE |
1406 | tristate "S3 Savage support" | |
1407 | depends on FB && PCI && EXPERIMENTAL | |
1da177e4 LT |
1408 | select FB_MODE_HELPERS |
1409 | select FB_CFB_FILLRECT | |
1410 | select FB_CFB_COPYAREA | |
1411 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1412 | select VGASTATE |
1da177e4 LT |
1413 | help |
1414 | This driver supports notebooks and computers with S3 Savage PCI/AGP | |
1415 | chips. | |
1416 | ||
1417 | Say Y if you have such a graphics card. | |
1418 | ||
1419 | To compile this driver as a module, choose M here; the module | |
1420 | will be called savagefb. | |
1421 | ||
1422 | config FB_SAVAGE_I2C | |
1423 | bool "Enable DDC2 Support" | |
1424 | depends on FB_SAVAGE | |
166f60dd | 1425 | select FB_DDC |
1da177e4 LT |
1426 | help |
1427 | This enables I2C support for S3 Savage Chipsets. This is used | |
1428 | only for getting EDID information from the attached display | |
1429 | allowing for robust video mode handling and switching. | |
1430 | ||
1431 | Because fbdev-2.6 requires that drivers must be able to | |
1432 | independently validate video mode parameters, you should say Y | |
1433 | here. | |
1434 | ||
1435 | config FB_SAVAGE_ACCEL | |
1436 | bool "Enable Console Acceleration" | |
1437 | depends on FB_SAVAGE | |
1438 | default n | |
1439 | help | |
1440 | This option will compile in console acceleration support. If | |
1441 | the resulting framebuffer console has bothersome glitches, then | |
1442 | choose N here. | |
1443 | ||
1444 | config FB_SIS | |
544393fe | 1445 | tristate "SiS/XGI display support" |
1da177e4 LT |
1446 | depends on FB && PCI |
1447 | select FB_CFB_FILLRECT | |
1448 | select FB_CFB_COPYAREA | |
1449 | select FB_CFB_IMAGEBLIT | |
4b198289 | 1450 | select FB_BOOT_VESA_SUPPORT if FB_SIS = y |
1da177e4 | 1451 | help |
544393fe TW |
1452 | This is the frame buffer device driver for the SiS 300, 315, 330 |
1453 | and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. | |
1454 | Specs available at <http://www.sis.com> and <http://www.xgitech.com>. | |
1da177e4 LT |
1455 | |
1456 | To compile this driver as a module, choose M here; the module | |
1457 | will be called sisfb. | |
1458 | ||
1459 | config FB_SIS_300 | |
1460 | bool "SiS 300 series support" | |
1461 | depends on FB_SIS | |
1462 | help | |
1463 | Say Y here to support use of the SiS 300/305, 540, 630 and 730. | |
1464 | ||
1465 | config FB_SIS_315 | |
544393fe | 1466 | bool "SiS 315/330/340 series and XGI support" |
1da177e4 LT |
1467 | depends on FB_SIS |
1468 | help | |
544393fe TW |
1469 | Say Y here to support use of the SiS 315, 330 and 340 series |
1470 | (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well | |
1471 | as XGI V3XT, V5, V8 and Z7. | |
1da177e4 | 1472 | |
6bde3ed9 JC |
1473 | config FB_VIA |
1474 | tristate "VIA UniChrome (Pro) and Chrome9 display support" | |
1475 | depends on FB && PCI | |
1476 | select FB_CFB_FILLRECT | |
1477 | select FB_CFB_COPYAREA | |
1478 | select FB_CFB_IMAGEBLIT | |
1479 | select FB_SOFT_CURSOR | |
1480 | select I2C_ALGOBIT | |
1481 | select I2C | |
1482 | help | |
1483 | This is the frame buffer device driver for Graphics chips of VIA | |
1484 | UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/ | |
1485 | CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896 | |
1486 | /P4M900,VX800) | |
1487 | Say Y if you have a VIA UniChrome graphics board. | |
1488 | ||
1489 | To compile this driver as a module, choose M here: the | |
1490 | module will be called viafb. | |
1da177e4 LT |
1491 | config FB_NEOMAGIC |
1492 | tristate "NeoMagic display support" | |
1493 | depends on FB && PCI | |
1494 | select FB_MODE_HELPERS | |
1495 | select FB_CFB_FILLRECT | |
1496 | select FB_CFB_COPYAREA | |
1497 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1498 | select VGASTATE |
1da177e4 LT |
1499 | help |
1500 | This driver supports notebooks with NeoMagic PCI chips. | |
1501 | Say Y if you have such a graphics card. | |
1502 | ||
1503 | To compile this driver as a module, choose M here: the | |
1504 | module will be called neofb. | |
1505 | ||
1506 | config FB_KYRO | |
1507 | tristate "IMG Kyro support" | |
1508 | depends on FB && PCI | |
1509 | select FB_CFB_FILLRECT | |
1510 | select FB_CFB_COPYAREA | |
1511 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1512 | help |
1513 | Say Y here if you have a STG4000 / Kyro / PowerVR 3 based | |
1514 | graphics board. | |
1515 | ||
1516 | To compile this driver as a module, choose M here: the | |
1517 | module will be called kyrofb. | |
1518 | ||
1519 | config FB_3DFX | |
4edad7f0 | 1520 | tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support" |
1da177e4 LT |
1521 | depends on FB && PCI |
1522 | select FB_CFB_IMAGEBLIT | |
1523 | select FB_CFB_FILLRECT | |
1524 | select FB_CFB_COPYAREA | |
feff3880 | 1525 | select FB_MODE_HELPERS |
1da177e4 | 1526 | help |
4edad7f0 KH |
1527 | This driver supports graphics boards with the 3Dfx Banshee, |
1528 | Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have | |
1529 | such a graphics board. | |
1da177e4 LT |
1530 | |
1531 | To compile this driver as a module, choose M here: the | |
1532 | module will be called tdfxfb. | |
1533 | ||
1534 | config FB_3DFX_ACCEL | |
4edad7f0 | 1535 | bool "3Dfx Acceleration functions (EXPERIMENTAL)" |
1da177e4 LT |
1536 | depends on FB_3DFX && EXPERIMENTAL |
1537 | ---help--- | |
4edad7f0 KH |
1538 | This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer |
1539 | device driver with acceleration functions. | |
1da177e4 | 1540 | |
feff3880 KH |
1541 | config FB_3DFX_I2C |
1542 | bool "Enable DDC/I2C support" | |
1543 | depends on FB_3DFX && EXPERIMENTAL | |
1544 | select FB_DDC | |
1545 | default y | |
1546 | help | |
1547 | Say Y here if you want DDC/I2C support for your 3dfx Voodoo3. | |
1548 | ||
1da177e4 LT |
1549 | config FB_VOODOO1 |
1550 | tristate "3Dfx Voodoo Graphics (sst1) support" | |
1551 | depends on FB && PCI | |
1552 | select FB_CFB_FILLRECT | |
1553 | select FB_CFB_COPYAREA | |
1554 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1555 | ---help--- |
1556 | Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or | |
1557 | Voodoo2 (cvg) based graphics card. | |
1558 | ||
1559 | To compile this driver as a module, choose M here: the | |
1560 | module will be called sstfb. | |
1561 | ||
1562 | WARNING: Do not use any application that uses the 3D engine | |
1563 | (namely glide) while using this driver. | |
e403149c | 1564 | Please read the <file:Documentation/fb/sstfb.txt> for supported |
1da177e4 LT |
1565 | options and other important info support. |
1566 | ||
558b7bd8 OZ |
1567 | config FB_VT8623 |
1568 | tristate "VIA VT8623 support" | |
1569 | depends on FB && PCI | |
1570 | select FB_CFB_FILLRECT | |
1571 | select FB_CFB_COPYAREA | |
1572 | select FB_CFB_IMAGEBLIT | |
1573 | select FB_TILEBLITTING | |
1574 | select FB_SVGALIB | |
1575 | select VGASTATE | |
1576 | select FONT_8x16 if FRAMEBUFFER_CONSOLE | |
1577 | ---help--- | |
1578 | Driver for CastleRock integrated graphics core in the | |
1579 | VIA VT8623 [Apollo CLE266] chipset. | |
1580 | ||
1da177e4 | 1581 | config FB_TRIDENT |
04645fc3 | 1582 | tristate "Trident/CyberXXX/CyberBlade support" |
1da177e4 LT |
1583 | depends on FB && PCI |
1584 | select FB_CFB_FILLRECT | |
1585 | select FB_CFB_COPYAREA | |
1586 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 1587 | ---help--- |
4edad7f0 KH |
1588 | This is the frame buffer device driver for Trident PCI/AGP chipsets. |
1589 | Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D | |
1590 | and Blade XP. | |
1591 | There are also integrated versions of these chips called CyberXXXX, | |
1592 | CyberImage or CyberBlade. These chips are mostly found in laptops | |
ddb53d48 KH |
1593 | but also on some motherboards including early VIA EPIA motherboards. |
1594 | For more information, read <file:Documentation/fb/tridentfb.txt> | |
1da177e4 LT |
1595 | |
1596 | Say Y if you have such a graphics board. | |
1597 | ||
1598 | To compile this driver as a module, choose M here: the | |
1599 | module will be called tridentfb. | |
1600 | ||
681e1473 OZ |
1601 | config FB_ARK |
1602 | tristate "ARK 2000PV support" | |
1603 | depends on FB && PCI | |
1604 | select FB_CFB_FILLRECT | |
1605 | select FB_CFB_COPYAREA | |
1606 | select FB_CFB_IMAGEBLIT | |
1607 | select FB_TILEBLITTING | |
1608 | select FB_SVGALIB | |
1609 | select VGASTATE | |
1610 | select FONT_8x16 if FRAMEBUFFER_CONSOLE | |
1611 | ---help--- | |
1612 | Driver for PCI graphics boards with ARK 2000PV chip | |
1613 | and ICS 5342 RAMDAC. | |
1614 | ||
1da177e4 | 1615 | config FB_PM3 |
f23a06f0 KH |
1616 | tristate "Permedia3 support (EXPERIMENTAL)" |
1617 | depends on FB && PCI && EXPERIMENTAL | |
1618 | select FB_CFB_FILLRECT | |
1619 | select FB_CFB_COPYAREA | |
1620 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1621 | help |
1622 | This is the frame buffer device driver for the 3DLabs Permedia3 | |
1623 | chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & | |
1624 | similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 | |
1625 | and maybe other boards. | |
1626 | ||
2ece5f43 SS |
1627 | config FB_CARMINE |
1628 | tristate "Fujitsu carmine frame buffer support" | |
1629 | depends on FB && PCI | |
1630 | select FB_CFB_FILLRECT | |
1631 | select FB_CFB_COPYAREA | |
1632 | select FB_CFB_IMAGEBLIT | |
1633 | help | |
1634 | This is the frame buffer device driver for the Fujitsu Carmine chip. | |
1635 | The driver provides two independent frame buffer devices. | |
1636 | ||
1637 | choice | |
1638 | depends on FB_CARMINE | |
1639 | prompt "DRAM timing" | |
1640 | default FB_CARMINE_DRAM_EVAL | |
1641 | ||
1642 | config FB_CARMINE_DRAM_EVAL | |
1643 | bool "Eval board timings" | |
1644 | help | |
1645 | Use timings which work on the eval card. | |
1646 | ||
1647 | config CARMINE_DRAM_CUSTOM | |
1648 | bool "Custom board timings" | |
1649 | help | |
1650 | Use custom board timings. | |
1651 | endchoice | |
1652 | ||
1da177e4 LT |
1653 | config FB_AU1100 |
1654 | bool "Au1100 LCD Driver" | |
d1709e47 RB |
1655 | depends on (FB = y) && MIPS && SOC_AU1100 |
1656 | select FB_CFB_FILLRECT | |
1657 | select FB_CFB_COPYAREA | |
1658 | select FB_CFB_IMAGEBLIT | |
1659 | help | |
1660 | This is the framebuffer driver for the AMD Au1100 SOC. It can drive | |
1661 | various panels and CRTs by passing in kernel cmd line option | |
1662 | au1100fb:panel=<name>. | |
1da177e4 | 1663 | |
f95ec3c6 RB |
1664 | config FB_AU1200 |
1665 | bool "Au1200 LCD Driver" | |
833f8062 | 1666 | depends on (FB = y) && MIPS && SOC_AU1200 |
f95ec3c6 RB |
1667 | select FB_CFB_FILLRECT |
1668 | select FB_CFB_COPYAREA | |
1669 | select FB_CFB_IMAGEBLIT | |
1670 | help | |
1671 | This is the framebuffer driver for the AMD Au1200 SOC. It can drive | |
1672 | various panels and CRTs by passing in kernel cmd line option | |
1673 | au1200fb:panel=<name>. | |
1674 | ||
1da177e4 LT |
1675 | source "drivers/video/geode/Kconfig" |
1676 | ||
1da177e4 LT |
1677 | config FB_HIT |
1678 | tristate "HD64461 Frame Buffer support" | |
1679 | depends on FB && HD64461 | |
1680 | select FB_CFB_FILLRECT | |
1681 | select FB_CFB_COPYAREA | |
1682 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1683 | help |
1684 | This is the frame buffer device driver for the Hitachi HD64461 LCD | |
1685 | frame buffer card. | |
1686 | ||
1687 | config FB_PMAG_AA | |
1688 | bool "PMAG-AA TURBOchannel framebuffer support" | |
a9350003 | 1689 | depends on (FB = y) && TC |
1da177e4 LT |
1690 | select FB_CFB_FILLRECT |
1691 | select FB_CFB_COPYAREA | |
1692 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1693 | help |
1694 | Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) | |
1695 | used mainly in the MIPS-based DECstation series. | |
1696 | ||
1697 | config FB_PMAG_BA | |
335dc50c MR |
1698 | tristate "PMAG-BA TURBOchannel framebuffer support" |
1699 | depends on FB && TC | |
1da177e4 LT |
1700 | select FB_CFB_FILLRECT |
1701 | select FB_CFB_COPYAREA | |
1702 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1703 | help |
1704 | Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) | |
1705 | used mainly in the MIPS-based DECstation series. | |
1706 | ||
1707 | config FB_PMAGB_B | |
9084b005 | 1708 | tristate "PMAGB-B TURBOchannel framebuffer support" |
28ea28a6 | 1709 | depends on FB && TC |
1da177e4 LT |
1710 | select FB_CFB_FILLRECT |
1711 | select FB_CFB_COPYAREA | |
1712 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1713 | help |
1714 | Support for the PMAGB-B TURBOchannel framebuffer card used mainly | |
1715 | in the MIPS-based DECstation series. The card is currently only | |
1716 | supported in 1280x1024x8 mode. | |
1717 | ||
1718 | config FB_MAXINE | |
1719 | bool "Maxine (Personal DECstation) onboard framebuffer support" | |
a9350003 | 1720 | depends on (FB = y) && MACH_DECSTATION |
1da177e4 LT |
1721 | select FB_CFB_FILLRECT |
1722 | select FB_CFB_COPYAREA | |
1723 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1724 | help |
1725 | Support for the onboard framebuffer (1024x768x8) in the Personal | |
1726 | DECstation series (Personal DECstation 5000/20, /25, /33, /50, | |
1727 | Codename "Maxine"). | |
1728 | ||
1da177e4 | 1729 | config FB_G364 |
b38817dd YY |
1730 | bool "G364 frame buffer support" |
1731 | depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) | |
1da177e4 LT |
1732 | select FB_CFB_FILLRECT |
1733 | select FB_CFB_COPYAREA | |
1734 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1735 | help |
1736 | The G364 driver is the framebuffer used in MIPS Magnum 4000 and | |
1737 | Olivetti M700-10 systems. | |
1738 | ||
1739 | config FB_68328 | |
1740 | bool "Motorola 68328 native frame buffer support" | |
833f8062 | 1741 | depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) |
1da177e4 LT |
1742 | select FB_CFB_FILLRECT |
1743 | select FB_CFB_COPYAREA | |
1744 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1745 | help |
1746 | Say Y here if you want to support the built-in frame buffer of | |
1747 | the Motorola 68328 CPU family. | |
1748 | ||
638772c7 LB |
1749 | config FB_PXA168 |
1750 | tristate "PXA168/910 LCD framebuffer support" | |
1751 | depends on FB && (CPU_PXA168 || CPU_PXA910) | |
1752 | select FB_CFB_FILLRECT | |
1753 | select FB_CFB_COPYAREA | |
1754 | select FB_CFB_IMAGEBLIT | |
1755 | ---help--- | |
1756 | Frame buffer driver for the built-in LCD controller in the Marvell | |
1757 | MMP processor. | |
1758 | ||
1da177e4 LT |
1759 | config FB_PXA |
1760 | tristate "PXA LCD framebuffer support" | |
1761 | depends on FB && ARCH_PXA | |
1762 | select FB_CFB_FILLRECT | |
1763 | select FB_CFB_COPYAREA | |
1764 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1765 | ---help--- |
1766 | Frame buffer driver for the built-in LCD controller in the Intel | |
1767 | PXA2x0 processor. | |
1768 | ||
1769 | This driver is also available as a module ( = code which can be | |
1770 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1771 | module will be called pxafb. If you want to compile it as a module, |
39f5fb30 | 1772 | say M here and read <file:Documentation/kbuild/modules.txt>. |
1da177e4 LT |
1773 | |
1774 | If unsure, say N. | |
1775 | ||
198fc108 EM |
1776 | config FB_PXA_OVERLAY |
1777 | bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer" | |
1778 | default n | |
1779 | depends on FB_PXA && (PXA27x || PXA3xx) | |
1780 | ||
3c42a449 EM |
1781 | config FB_PXA_SMARTPANEL |
1782 | bool "PXA Smartpanel LCD support" | |
7f1133cb | 1783 | default n |
3c42a449 EM |
1784 | depends on FB_PXA |
1785 | ||
1da177e4 LT |
1786 | config FB_PXA_PARAMETERS |
1787 | bool "PXA LCD command line parameters" | |
1788 | default n | |
1789 | depends on FB_PXA | |
1790 | ---help--- | |
1791 | Enable the use of kernel command line or module parameters | |
1792 | to configure the physical properties of the LCD panel when | |
1793 | using the PXA LCD driver. | |
1794 | ||
1795 | This option allows you to override the panel parameters | |
1796 | supplied by the platform in order to support multiple | |
1797 | different models of flatpanel. If you will only be using a | |
1798 | single model of flatpanel then you can safely leave this | |
1799 | option disabled. | |
1800 | ||
1801 | <file:Documentation/fb/pxafb.txt> describes the available parameters. | |
1802 | ||
22caf042 MR |
1803 | config FB_MBX |
1804 | tristate "2700G LCD framebuffer support" | |
1805 | depends on FB && ARCH_PXA | |
1806 | select FB_CFB_FILLRECT | |
1807 | select FB_CFB_COPYAREA | |
1808 | select FB_CFB_IMAGEBLIT | |
1809 | ---help--- | |
1810 | Framebuffer driver for the Intel 2700G (Marathon) Graphics | |
1811 | Accelerator | |
1812 | ||
1813 | config FB_MBX_DEBUG | |
1814 | bool "Enable debugging info via debugfs" | |
1815 | depends on FB_MBX && DEBUG_FS | |
1816 | default n | |
1817 | ---help--- | |
1818 | Enable this if you want debugging information using the debug | |
1819 | filesystem (debugfs) | |
1820 | ||
1821 | If unsure, say N. | |
1822 | ||
9b53a9e2 YS |
1823 | config FB_FSL_DIU |
1824 | tristate "Freescale DIU framebuffer support" | |
1825 | depends on FB && FSL_SOC | |
1826 | select FB_CFB_FILLRECT | |
1827 | select FB_CFB_COPYAREA | |
1828 | select FB_CFB_IMAGEBLIT | |
1829 | select PPC_LIB_RHEAP | |
1830 | ---help--- | |
1831 | Framebuffer driver for the Freescale SoC DIU | |
1832 | ||
ecc41d5e RD |
1833 | config FB_W100 |
1834 | tristate "W100 frame buffer support" | |
e5dd3cbd | 1835 | depends on FB && ARCH_PXA |
ecc41d5e RD |
1836 | select FB_CFB_FILLRECT |
1837 | select FB_CFB_COPYAREA | |
1838 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
1839 | ---help--- |
1840 | Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. | |
e5dd3cbd | 1841 | It can also drive the w3220 chip found on iPAQ hx4700. |
ecc41d5e RD |
1842 | |
1843 | This driver is also available as a module ( = code which can be | |
1844 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1845 | module will be called w100fb. If you want to compile it as a module, |
39f5fb30 | 1846 | say M here and read <file:Documentation/kbuild/modules.txt>. |
ecc41d5e RD |
1847 | |
1848 | If unsure, say N. | |
1da177e4 | 1849 | |
cfb4f5d1 MD |
1850 | config FB_SH_MOBILE_LCDC |
1851 | tristate "SuperH Mobile LCDC framebuffer support" | |
727dc3fd | 1852 | depends on FB && SUPERH && HAVE_CLK |
2540c111 MD |
1853 | select FB_SYS_FILLRECT |
1854 | select FB_SYS_COPYAREA | |
1855 | select FB_SYS_IMAGEBLIT | |
1856 | select FB_SYS_FOPS | |
8564557a | 1857 | select FB_DEFERRED_IO |
cfb4f5d1 MD |
1858 | ---help--- |
1859 | Frame buffer driver for the on-chip SH-Mobile LCD controller. | |
1860 | ||
b53cde35 DES |
1861 | config FB_TMIO |
1862 | tristate "Toshiba Mobile IO FrameBuffer support" | |
1863 | depends on FB && MFD_CORE | |
1864 | select FB_CFB_FILLRECT | |
1865 | select FB_CFB_COPYAREA | |
1866 | select FB_CFB_IMAGEBLIT | |
1867 | ---help--- | |
1868 | Frame buffer driver for the Toshiba Mobile IO integrated as found | |
1869 | on the Sharp SL-6000 series | |
1870 | ||
1871 | This driver is also available as a module ( = code which can be | |
1872 | inserted and removed from the running kernel whenever you want). The | |
1873 | module will be called tmiofb. If you want to compile it as a module, | |
1874 | say M here and read <file:Documentation/kbuild/modules.txt>. | |
1875 | ||
1876 | If unsure, say N. | |
1877 | ||
1878 | config FB_TMIO_ACCELL | |
1879 | bool "tmiofb acceleration" | |
1880 | depends on FB_TMIO | |
1881 | default y | |
1882 | ||
ec549a0f BD |
1883 | config FB_S3C |
1884 | tristate "Samsung S3C framebuffer support" | |
1885 | depends on FB && ARCH_S3C64XX | |
1886 | select FB_CFB_FILLRECT | |
1887 | select FB_CFB_COPYAREA | |
1888 | select FB_CFB_IMAGEBLIT | |
1889 | ---help--- | |
1890 | Frame buffer driver for the built-in FB controller in the Samsung | |
1891 | SoC line from the S3C2443 onwards, including the S3C2416, S3C2450, | |
1892 | and the S3C64XX series such as the S3C6400 and S3C6410. | |
1893 | ||
1894 | These chips all have the same basic framebuffer design with the | |
1895 | actual capabilities depending on the chip. For instance the S3C6400 | |
1896 | and S3C6410 support 4 hardware windows whereas the S3C24XX series | |
1897 | currently only have two. | |
1898 | ||
1899 | Currently the support is only for the S3C6400 and S3C6410 SoCs. | |
1900 | ||
1901 | config FB_S3C_DEBUG_REGWRITE | |
1902 | bool "Debug register writes" | |
1903 | depends on FB_S3C | |
1904 | ---help--- | |
1905 | Show all register writes via printk(KERN_DEBUG) | |
1906 | ||
20fd5767 AP |
1907 | config FB_S3C2410 |
1908 | tristate "S3C2410 LCD framebuffer support" | |
1909 | depends on FB && ARCH_S3C2410 | |
1910 | select FB_CFB_FILLRECT | |
1911 | select FB_CFB_COPYAREA | |
1912 | select FB_CFB_IMAGEBLIT | |
20fd5767 AP |
1913 | ---help--- |
1914 | Frame buffer driver for the built-in LCD controller in the Samsung | |
1915 | S3C2410 processor. | |
1916 | ||
1917 | This driver is also available as a module ( = code which can be | |
1918 | inserted and removed from the running kernel whenever you want). The | |
1919 | module will be called s3c2410fb. If you want to compile it as a module, | |
39f5fb30 | 1920 | say M here and read <file:Documentation/kbuild/modules.txt>. |
20fd5767 AP |
1921 | |
1922 | If unsure, say N. | |
1923 | config FB_S3C2410_DEBUG | |
1924 | bool "S3C2410 lcd debug messages" | |
1925 | depends on FB_S3C2410 | |
1926 | help | |
1927 | Turn on debugging messages. Note that you can set/unset at run time | |
1928 | through sysfs | |
1929 | ||
5fc404e4 BD |
1930 | config FB_SM501 |
1931 | tristate "Silicon Motion SM501 framebuffer support" | |
1932 | depends on FB && MFD_SM501 | |
1933 | select FB_CFB_FILLRECT | |
1934 | select FB_CFB_COPYAREA | |
1935 | select FB_CFB_IMAGEBLIT | |
1936 | ---help--- | |
1937 | Frame buffer driver for the CRT and LCD controllers in the Silicon | |
1938 | Motion SM501. | |
1939 | ||
1940 | This driver is also available as a module ( = code which can be | |
1941 | inserted and removed from the running kernel whenever you want). The | |
1942 | module will be called sm501fb. If you want to compile it as a module, | |
e403149c | 1943 | say M here and read <file:Documentation/kbuild/modules.txt>. |
5fc404e4 BD |
1944 | |
1945 | If unsure, say N. | |
1946 | ||
1947 | ||
36c9366e VW |
1948 | config FB_PNX4008_DUM |
1949 | tristate "Display Update Module support on Philips PNX4008 board" | |
1950 | depends on FB && ARCH_PNX4008 | |
1951 | ---help--- | |
1952 | Say Y here to enable support for PNX4008 Display Update Module (DUM) | |
1953 | ||
1954 | config FB_PNX4008_DUM_RGB | |
1955 | tristate "RGB Framebuffer support on Philips PNX4008 board" | |
1956 | depends on FB_PNX4008_DUM | |
1957 | select FB_CFB_FILLRECT | |
1958 | select FB_CFB_COPYAREA | |
1959 | select FB_CFB_IMAGEBLIT | |
1960 | ---help--- | |
1961 | Say Y here to enable support for PNX4008 RGB Framebuffer | |
1962 | ||
a3d89983 PM |
1963 | config FB_IBM_GXT4500 |
1964 | tristate "Framebuffer support for IBM GXT4500P adaptor" | |
0058f479 | 1965 | depends on FB && PPC |
a3d89983 PM |
1966 | select FB_CFB_FILLRECT |
1967 | select FB_CFB_COPYAREA | |
1968 | select FB_CFB_IMAGEBLIT | |
1969 | ---help--- | |
1970 | Say Y here to enable support for the IBM GXT4500P display | |
1971 | adaptor, found on some IBM System P (pSeries) machines. | |
1972 | ||
310d8c11 | 1973 | config FB_PS3 |
9e6b99bd GU |
1974 | tristate "PS3 GPU framebuffer driver" |
1975 | depends on FB && PS3_PS3AV | |
92c4579d GU |
1976 | select FB_SYS_FILLRECT |
1977 | select FB_SYS_COPYAREA | |
1978 | select FB_SYS_IMAGEBLIT | |
1979 | select FB_SYS_FOPS | |
23e9c94c | 1980 | select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE |
310d8c11 GU |
1981 | ---help--- |
1982 | Include support for the virtual frame buffer in the PS3 platform. | |
1983 | ||
1984 | config FB_PS3_DEFAULT_SIZE_M | |
1985 | int "PS3 default frame buffer size (in MiB)" | |
1986 | depends on FB_PS3 | |
50b2529e | 1987 | default 9 |
310d8c11 GU |
1988 | ---help--- |
1989 | This is the default size (in MiB) of the virtual frame buffer in | |
1990 | the PS3. | |
1991 | The default value can be overridden on the kernel command line | |
1992 | using the "ps3fb" option (e.g. "ps3fb=9M"); | |
1993 | ||
147394c8 AK |
1994 | config FB_XILINX |
1995 | tristate "Xilinx frame buffer support" | |
6fa612b5 | 1996 | depends on FB && (XILINX_VIRTEX || MICROBLAZE) |
147394c8 AK |
1997 | select FB_CFB_FILLRECT |
1998 | select FB_CFB_COPYAREA | |
1999 | select FB_CFB_IMAGEBLIT | |
2000 | ---help--- | |
2001 | Include support for the Xilinx ML300/ML403 reference design | |
2002 | framebuffer. ML300 carries a 640*480 LCD display on the board, | |
2003 | ML403 uses a standard DB15 VGA connector. | |
2004 | ||
5abe3b40 YY |
2005 | config FB_COBALT |
2006 | tristate "Cobalt server LCD frame buffer support" | |
2007 | depends on FB && MIPS_COBALT | |
2008 | ||
4a25e418 | 2009 | config FB_SH7760 |
5c72f303 NI |
2010 | bool "SH7760/SH7763/SH7720/SH7721 LCDC support" |
2011 | depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \ | |
2012 | || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721) | |
2013 | select FB_CFB_FILLRECT | |
2014 | select FB_CFB_COPYAREA | |
2015 | select FB_CFB_IMAGEBLIT | |
2016 | ---help--- | |
2017 | Support for the SH7760/SH7763/SH7720/SH7721 integrated | |
2018 | (D)STN/TFT LCD Controller. | |
2019 | Supports display resolutions up to 1024x1024 pixel, grayscale and | |
2020 | color operation, with depths ranging from 1 bpp to 8 bpp monochrome | |
2021 | and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for | |
2022 | panels <= 320 pixel horizontal resolution. | |
4a25e418 | 2023 | |
4ed824d9 SR |
2024 | config FB_DA8XX |
2025 | tristate "DA8xx/OMAP-L1xx Framebuffer support" | |
2026 | depends on FB && ARCH_DAVINCI_DA8XX | |
2027 | select FB_CFB_FILLRECT | |
2028 | select FB_CFB_COPYAREA | |
2029 | select FB_CFB_IMAGEBLIT | |
2030 | ---help--- | |
2031 | This is the frame buffer device driver for the TI LCD controller | |
2032 | found on DA8xx/OMAP-L1xx SoCs. | |
2033 | If unsure, say N. | |
2034 | ||
1da177e4 LT |
2035 | config FB_VIRTUAL |
2036 | tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" | |
2037 | depends on FB | |
87b48849 AD |
2038 | select FB_SYS_FILLRECT |
2039 | select FB_SYS_COPYAREA | |
2040 | select FB_SYS_IMAGEBLIT | |
52102c07 | 2041 | select FB_SYS_FOPS |
1da177e4 LT |
2042 | ---help--- |
2043 | This is a `virtual' frame buffer device. It operates on a chunk of | |
2044 | unswappable kernel memory instead of on the memory of a graphics | |
2045 | board. This means you cannot see any output sent to this frame | |
2046 | buffer device, while it does consume precious memory. The main use | |
2047 | of this frame buffer device is testing and debugging the frame | |
2048 | buffer subsystem. Do NOT enable it for normal systems! To protect | |
2049 | the innocent, it has to be enabled explicitly at boot time using the | |
2050 | kernel option `video=vfb:'. | |
2051 | ||
2052 | To compile this driver as a module, choose M here: the | |
66cf7512 MF |
2053 | module will be called vfb. In order to load it, you must use |
2054 | the vfb_enable=1 option. | |
1da177e4 LT |
2055 | |
2056 | If unsure, say N. | |
e0e34ef7 | 2057 | |
4ee36dc0 MA |
2058 | config XEN_FBDEV_FRONTEND |
2059 | tristate "Xen virtual frame buffer support" | |
2060 | depends on FB && XEN | |
2061 | select FB_SYS_FILLRECT | |
2062 | select FB_SYS_COPYAREA | |
2063 | select FB_SYS_IMAGEBLIT | |
2064 | select FB_SYS_FOPS | |
2065 | select FB_DEFERRED_IO | |
2066 | default y | |
2067 | help | |
2068 | This driver implements the front-end of the Xen virtual | |
2069 | frame buffer driver. It communicates with a back-end | |
2070 | in another domain. | |
2071 | ||
e9355085 JK |
2072 | config FB_METRONOME |
2073 | tristate "E-Ink Metronome/8track controller support" | |
2074 | depends on FB | |
2075 | select FB_SYS_FILLRECT | |
2076 | select FB_SYS_COPYAREA | |
2077 | select FB_SYS_IMAGEBLIT | |
2078 | select FB_SYS_FOPS | |
2079 | select FB_DEFERRED_IO | |
2080 | help | |
2081 | This driver implements support for the E-Ink Metronome | |
2082 | controller. The pre-release name for this device was 8track | |
2083 | and could also have been called by some vendors as PVI-nnnn. | |
2084 | ||
17a1217e AG |
2085 | config FB_MB862XX |
2086 | tristate "Fujitsu MB862xx GDC support" | |
2087 | depends on FB | |
2088 | select FB_CFB_FILLRECT | |
2089 | select FB_CFB_COPYAREA | |
2090 | select FB_CFB_IMAGEBLIT | |
2091 | ---help--- | |
2092 | Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers. | |
2093 | ||
2094 | config FB_MB862XX_PCI_GDC | |
2095 | bool "Carmine/Coral-P(A) GDC" | |
2096 | depends on PCI && FB_MB862XX | |
2097 | ---help--- | |
2098 | This enables framebuffer support for Fujitsu Carmine/Coral-P(A) | |
2099 | PCI graphics controller devices. | |
2100 | ||
2101 | config FB_MB862XX_LIME | |
2102 | bool "Lime GDC" | |
2103 | depends on FB_MB862XX | |
2104 | depends on OF && !FB_MB862XX_PCI_GDC | |
336e747e | 2105 | depends on PPC |
17a1217e AG |
2106 | select FB_FOREIGN_ENDIAN |
2107 | select FB_LITTLE_ENDIAN | |
2108 | ---help--- | |
2109 | Framebuffer support for Fujitsu Lime GDC on host CPU bus. | |
2110 | ||
88017bda RM |
2111 | config FB_EP93XX |
2112 | tristate "EP93XX frame buffer support" | |
2113 | depends on FB && ARCH_EP93XX | |
2114 | select FB_CFB_FILLRECT | |
2115 | select FB_CFB_COPYAREA | |
2116 | select FB_CFB_IMAGEBLIT | |
2117 | ---help--- | |
2118 | Framebuffer driver for the Cirrus Logic EP93XX series of processors. | |
2119 | This driver is also available as a module. The module will be called | |
2120 | ep93xx-fb. | |
2121 | ||
17a1217e AG |
2122 | config FB_PRE_INIT_FB |
2123 | bool "Don't reinitialize, use bootloader's GDC/Display configuration" | |
93f40e6f | 2124 | depends on FB && FB_MB862XX_LIME |
17a1217e AG |
2125 | ---help--- |
2126 | Select this option if display contents should be inherited as set by | |
2127 | the bootloader. | |
2128 | ||
d480ace0 PM |
2129 | config FB_MSM |
2130 | tristate | |
2131 | depends on FB && ARCH_MSM | |
2132 | select FB_CFB_FILLRECT | |
2133 | select FB_CFB_COPYAREA | |
2134 | select FB_CFB_IMAGEBLIT | |
2135 | default y | |
2136 | ||
86528da2 | 2137 | config FB_MX3 |
6e1588cb GL |
2138 | tristate "MX3 Framebuffer support" |
2139 | depends on FB && MX3_IPU | |
2140 | select FB_CFB_FILLRECT | |
2141 | select FB_CFB_COPYAREA | |
2142 | select FB_CFB_IMAGEBLIT | |
2143 | default y | |
2144 | help | |
2145 | This is a framebuffer device for the i.MX31 LCD Controller. So | |
2146 | far only synchronous displays are supported. If you plan to use | |
2147 | an LCD display with your i.MX31 system, say Y here. | |
86528da2 | 2148 | |
0d4ff4df JK |
2149 | config FB_BROADSHEET |
2150 | tristate "E-Ink Broadsheet/Epson S1D13521 controller support" | |
2151 | depends on FB | |
2152 | select FB_SYS_FILLRECT | |
2153 | select FB_SYS_COPYAREA | |
2154 | select FB_SYS_IMAGEBLIT | |
2155 | select FB_SYS_FOPS | |
2156 | select FB_DEFERRED_IO | |
2157 | help | |
2158 | This driver implements support for the E-Ink Broadsheet | |
2159 | controller. The release name for this device was Epson S1D13521 | |
2160 | and could also have been called by other names when coupled with | |
2161 | a bridge adapter. | |
2162 | ||
f08f3895 | 2163 | source "drivers/video/omap/Kconfig" |
0058f479 | 2164 | |
179b025f RD |
2165 | source "drivers/video/backlight/Kconfig" |
2166 | source "drivers/video/display/Kconfig" | |
2167 | ||
1da177e4 LT |
2168 | if VT |
2169 | source "drivers/video/console/Kconfig" | |
2170 | endif | |
2171 | ||
2172 | if FB || SGI_NEWPORT_CONSOLE | |
2173 | source "drivers/video/logo/Kconfig" | |
2174 | endif | |
2175 | ||
1da177e4 | 2176 | endmenu |