Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* Driver for USB Mass Storage compliant devices |
1da177e4 LT |
2 | * |
3 | * Current development and maintenance by: | |
4 | * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) | |
5 | * | |
6 | * Developed with the assistance of: | |
7 | * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) | |
8 | * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov) | |
9 | * (c) 2002 Alan Stern <stern@rowland.org> | |
10 | * | |
11 | * Initial work by: | |
12 | * (c) 1999 Michael Gee (michael@linuxspecific.com) | |
13 | * | |
14 | * This driver is based on the 'USB Mass Storage Class' document. This | |
15 | * describes in detail the protocol used to communicate with such | |
16 | * devices. Clearly, the designers had SCSI and ATAPI commands in | |
17 | * mind when they created this document. The commands are all very | |
18 | * similar to commands in the SCSI-II and ATAPI specifications. | |
19 | * | |
20 | * It is important to note that in a number of cases this class | |
21 | * exhibits class-specific exemptions from the USB specification. | |
22 | * Notably the usage of NAK, STALL and ACK differs from the norm, in | |
23 | * that they are used to communicate wait, failed and OK on commands. | |
24 | * | |
25 | * Also, for certain devices, the interrupt endpoint is used to convey | |
26 | * status of a command. | |
27 | * | |
28 | * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more | |
29 | * information about this driver. | |
30 | * | |
31 | * This program is free software; you can redistribute it and/or modify it | |
32 | * under the terms of the GNU General Public License as published by the | |
33 | * Free Software Foundation; either version 2, or (at your option) any | |
34 | * later version. | |
35 | * | |
36 | * This program is distributed in the hope that it will be useful, but | |
37 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
38 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
39 | * General Public License for more details. | |
40 | * | |
41 | * You should have received a copy of the GNU General Public License along | |
42 | * with this program; if not, write to the Free Software Foundation, Inc., | |
43 | * 675 Mass Ave, Cambridge, MA 02139, USA. | |
44 | */ | |
45 | ||
1da177e4 LT |
46 | #include <linux/sched.h> |
47 | #include <linux/errno.h> | |
48 | #include <linux/slab.h> | |
49 | ||
50 | #include <scsi/scsi.h> | |
dff6de73 | 51 | #include <scsi/scsi_eh.h> |
1da177e4 LT |
52 | #include <scsi/scsi_device.h> |
53 | ||
54 | #include "usb.h" | |
55 | #include "transport.h" | |
56 | #include "protocol.h" | |
57 | #include "scsiglue.h" | |
58 | #include "debug.h" | |
59 | ||
25ff1c31 AS |
60 | #include <linux/blkdev.h> |
61 | #include "../../scsi/sd.h" | |
62 | ||
1da177e4 LT |
63 | |
64 | /*********************************************************************** | |
65 | * Data transfer routines | |
66 | ***********************************************************************/ | |
67 | ||
68 | /* | |
69 | * This is subtle, so pay attention: | |
70 | * --------------------------------- | |
71 | * We're very concerned about races with a command abort. Hanging this code | |
72 | * is a sure fire way to hang the kernel. (Note that this discussion applies | |
73 | * only to transactions resulting from a scsi queued-command, since only | |
74 | * these transactions are subject to a scsi abort. Other transactions, such | |
75 | * as those occurring during device-specific initialization, must be handled | |
76 | * by a separate code path.) | |
77 | * | |
78 | * The abort function (usb_storage_command_abort() in scsiglue.c) first | |
7e4d6c38 | 79 | * sets the machine state and the ABORTING bit in us->dflags to prevent |
1da177e4 | 80 | * new URBs from being submitted. It then calls usb_stor_stop_transport() |
7e4d6c38 | 81 | * below, which atomically tests-and-clears the URB_ACTIVE bit in us->dflags |
1da177e4 LT |
82 | * to see if the current_urb needs to be stopped. Likewise, the SG_ACTIVE |
83 | * bit is tested to see if the current_sg scatter-gather request needs to be | |
84 | * stopped. The timeout callback routine does much the same thing. | |
85 | * | |
7e4d6c38 | 86 | * When a disconnect occurs, the DISCONNECTING bit in us->dflags is set to |
1da177e4 LT |
87 | * prevent new URBs from being submitted, and usb_stor_stop_transport() is |
88 | * called to stop any ongoing requests. | |
89 | * | |
90 | * The submit function first verifies that the submitting is allowed | |
91 | * (neither ABORTING nor DISCONNECTING bits are set) and that the submit | |
92 | * completes without errors, and only then sets the URB_ACTIVE bit. This | |
93 | * prevents the stop_transport() function from trying to cancel the URB | |
94 | * while the submit call is underway. Next, the submit function must test | |
95 | * the flags to see if an abort or disconnect occurred during the submission | |
96 | * or before the URB_ACTIVE bit was set. If so, it's essential to cancel | |
97 | * the URB if it hasn't been cancelled already (i.e., if the URB_ACTIVE bit | |
98 | * is still set). Either way, the function must then wait for the URB to | |
b375a049 AS |
99 | * finish. Note that the URB can still be in progress even after a call to |
100 | * usb_unlink_urb() returns. | |
1da177e4 LT |
101 | * |
102 | * The idea is that (1) once the ABORTING or DISCONNECTING bit is set, | |
103 | * either the stop_transport() function or the submitting function | |
104 | * is guaranteed to call usb_unlink_urb() for an active URB, | |
105 | * and (2) test_and_clear_bit() prevents usb_unlink_urb() from being | |
106 | * called more than once or from being called during usb_submit_urb(). | |
107 | */ | |
108 | ||
109 | /* This is the completion handler which will wake us up when an URB | |
110 | * completes. | |
111 | */ | |
7d12e780 | 112 | static void usb_stor_blocking_completion(struct urb *urb) |
1da177e4 | 113 | { |
cdc97792 | 114 | struct completion *urb_done_ptr = urb->context; |
1da177e4 LT |
115 | |
116 | complete(urb_done_ptr); | |
117 | } | |
1da177e4 LT |
118 | |
119 | /* This is the common part of the URB message submission code | |
120 | * | |
121 | * All URBs from the usb-storage driver involved in handling a queued scsi | |
122 | * command _must_ pass through this function (or something like it) for the | |
123 | * abort mechanisms to work properly. | |
124 | */ | |
125 | static int usb_stor_msg_common(struct us_data *us, int timeout) | |
126 | { | |
127 | struct completion urb_done; | |
3428cc43 | 128 | long timeleft; |
1da177e4 LT |
129 | int status; |
130 | ||
543f7810 AS |
131 | /* don't submit URBs during abort processing */ |
132 | if (test_bit(US_FLIDX_ABORTING, &us->dflags)) | |
1da177e4 LT |
133 | return -EIO; |
134 | ||
135 | /* set up data structures for the wakeup system */ | |
136 | init_completion(&urb_done); | |
137 | ||
138 | /* fill the common fields in the URB */ | |
139 | us->current_urb->context = &urb_done; | |
140 | us->current_urb->actual_length = 0; | |
141 | us->current_urb->error_count = 0; | |
142 | us->current_urb->status = 0; | |
143 | ||
144 | /* we assume that if transfer_buffer isn't us->iobuf then it | |
145 | * hasn't been mapped for DMA. Yes, this is clunky, but it's | |
146 | * easier than always having the caller tell us whether the | |
147 | * transfer buffer has already been mapped. */ | |
b375a049 | 148 | us->current_urb->transfer_flags = URB_NO_SETUP_DMA_MAP; |
1da177e4 LT |
149 | if (us->current_urb->transfer_buffer == us->iobuf) |
150 | us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
151 | us->current_urb->transfer_dma = us->iobuf_dma; | |
152 | us->current_urb->setup_dma = us->cr_dma; | |
153 | ||
154 | /* submit the URB */ | |
155 | status = usb_submit_urb(us->current_urb, GFP_NOIO); | |
156 | if (status) { | |
157 | /* something went wrong */ | |
158 | return status; | |
159 | } | |
160 | ||
161 | /* since the URB has been submitted successfully, it's now okay | |
162 | * to cancel it */ | |
7e4d6c38 | 163 | set_bit(US_FLIDX_URB_ACTIVE, &us->dflags); |
1da177e4 | 164 | |
543f7810 AS |
165 | /* did an abort occur during the submission? */ |
166 | if (test_bit(US_FLIDX_ABORTING, &us->dflags)) { | |
1da177e4 LT |
167 | |
168 | /* cancel the URB, if it hasn't been cancelled already */ | |
7e4d6c38 | 169 | if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) { |
1da177e4 LT |
170 | US_DEBUGP("-- cancelling URB\n"); |
171 | usb_unlink_urb(us->current_urb); | |
172 | } | |
173 | } | |
174 | ||
1da177e4 | 175 | /* wait for the completion of the URB */ |
3428cc43 FBH |
176 | timeleft = wait_for_completion_interruptible_timeout( |
177 | &urb_done, timeout ? : MAX_SCHEDULE_TIMEOUT); | |
1da177e4 | 178 | |
7e4d6c38 | 179 | clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags); |
3428cc43 FBH |
180 | |
181 | if (timeleft <= 0) { | |
182 | US_DEBUGP("%s -- cancelling URB\n", | |
183 | timeleft == 0 ? "Timeout" : "Signal"); | |
d6b7d3b6 | 184 | usb_kill_urb(us->current_urb); |
3428cc43 | 185 | } |
1da177e4 LT |
186 | |
187 | /* return the URB status */ | |
188 | return us->current_urb->status; | |
189 | } | |
190 | ||
191 | /* | |
192 | * Transfer one control message, with timeouts, and allowing early | |
193 | * termination. Return codes are usual -Exxx, *not* USB_STOR_XFER_xxx. | |
194 | */ | |
195 | int usb_stor_control_msg(struct us_data *us, unsigned int pipe, | |
196 | u8 request, u8 requesttype, u16 value, u16 index, | |
197 | void *data, u16 size, int timeout) | |
198 | { | |
199 | int status; | |
200 | ||
201 | US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", | |
441b62c1 | 202 | __func__, request, requesttype, |
1da177e4 LT |
203 | value, index, size); |
204 | ||
205 | /* fill in the devrequest structure */ | |
206 | us->cr->bRequestType = requesttype; | |
207 | us->cr->bRequest = request; | |
208 | us->cr->wValue = cpu_to_le16(value); | |
209 | us->cr->wIndex = cpu_to_le16(index); | |
210 | us->cr->wLength = cpu_to_le16(size); | |
211 | ||
212 | /* fill and submit the URB */ | |
213 | usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe, | |
214 | (unsigned char*) us->cr, data, size, | |
215 | usb_stor_blocking_completion, NULL); | |
216 | status = usb_stor_msg_common(us, timeout); | |
217 | ||
218 | /* return the actual length of the data transferred if no error */ | |
219 | if (status == 0) | |
220 | status = us->current_urb->actual_length; | |
221 | return status; | |
222 | } | |
e6e244b6 | 223 | EXPORT_SYMBOL_GPL(usb_stor_control_msg); |
1da177e4 LT |
224 | |
225 | /* This is a version of usb_clear_halt() that allows early termination and | |
226 | * doesn't read the status from the device -- this is because some devices | |
227 | * crash their internal firmware when the status is requested after a halt. | |
228 | * | |
229 | * A definitive list of these 'bad' devices is too difficult to maintain or | |
230 | * make complete enough to be useful. This problem was first observed on the | |
231 | * Hagiwara FlashGate DUAL unit. However, bus traces reveal that neither | |
232 | * MacOS nor Windows checks the status after clearing a halt. | |
233 | * | |
234 | * Since many vendors in this space limit their testing to interoperability | |
235 | * with these two OSes, specification violations like this one are common. | |
236 | */ | |
237 | int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) | |
238 | { | |
239 | int result; | |
240 | int endp = usb_pipeendpoint(pipe); | |
241 | ||
242 | if (usb_pipein (pipe)) | |
243 | endp |= USB_DIR_IN; | |
244 | ||
245 | result = usb_stor_control_msg(us, us->send_ctrl_pipe, | |
246 | USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, | |
247 | USB_ENDPOINT_HALT, endp, | |
248 | NULL, 0, 3*HZ); | |
249 | ||
5203ad44 | 250 | if (result >= 0) |
3444b26a | 251 | usb_reset_endpoint(us->pusb_dev, endp); |
1da177e4 | 252 | |
441b62c1 | 253 | US_DEBUGP("%s: result = %d\n", __func__, result); |
1da177e4 LT |
254 | return result; |
255 | } | |
e6e244b6 | 256 | EXPORT_SYMBOL_GPL(usb_stor_clear_halt); |
1da177e4 LT |
257 | |
258 | ||
259 | /* | |
260 | * Interpret the results of a URB transfer | |
261 | * | |
262 | * This function prints appropriate debugging messages, clears halts on | |
263 | * non-control endpoints, and translates the status to the corresponding | |
264 | * USB_STOR_XFER_xxx return code. | |
265 | */ | |
266 | static int interpret_urb_result(struct us_data *us, unsigned int pipe, | |
267 | unsigned int length, int result, unsigned int partial) | |
268 | { | |
269 | US_DEBUGP("Status code %d; transferred %u/%u\n", | |
270 | result, partial, length); | |
271 | switch (result) { | |
272 | ||
273 | /* no error code; did we send all the data? */ | |
274 | case 0: | |
275 | if (partial != length) { | |
276 | US_DEBUGP("-- short transfer\n"); | |
277 | return USB_STOR_XFER_SHORT; | |
278 | } | |
279 | ||
280 | US_DEBUGP("-- transfer complete\n"); | |
281 | return USB_STOR_XFER_GOOD; | |
282 | ||
283 | /* stalled */ | |
284 | case -EPIPE: | |
285 | /* for control endpoints, (used by CB[I]) a stall indicates | |
286 | * a failed command */ | |
287 | if (usb_pipecontrol(pipe)) { | |
288 | US_DEBUGP("-- stall on control pipe\n"); | |
289 | return USB_STOR_XFER_STALLED; | |
290 | } | |
291 | ||
292 | /* for other sorts of endpoint, clear the stall */ | |
293 | US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe); | |
294 | if (usb_stor_clear_halt(us, pipe) < 0) | |
295 | return USB_STOR_XFER_ERROR; | |
296 | return USB_STOR_XFER_STALLED; | |
297 | ||
1da177e4 LT |
298 | /* babble - the device tried to send more than we wanted to read */ |
299 | case -EOVERFLOW: | |
300 | US_DEBUGP("-- babble\n"); | |
301 | return USB_STOR_XFER_LONG; | |
302 | ||
303 | /* the transfer was cancelled by abort, disconnect, or timeout */ | |
304 | case -ECONNRESET: | |
305 | US_DEBUGP("-- transfer cancelled\n"); | |
306 | return USB_STOR_XFER_ERROR; | |
307 | ||
308 | /* short scatter-gather read transfer */ | |
309 | case -EREMOTEIO: | |
310 | US_DEBUGP("-- short read transfer\n"); | |
311 | return USB_STOR_XFER_SHORT; | |
312 | ||
313 | /* abort or disconnect in progress */ | |
314 | case -EIO: | |
315 | US_DEBUGP("-- abort or disconnect in progress\n"); | |
316 | return USB_STOR_XFER_ERROR; | |
317 | ||
318 | /* the catch-all error case */ | |
319 | default: | |
320 | US_DEBUGP("-- unknown error\n"); | |
321 | return USB_STOR_XFER_ERROR; | |
322 | } | |
323 | } | |
324 | ||
325 | /* | |
326 | * Transfer one control message, without timeouts, but allowing early | |
327 | * termination. Return codes are USB_STOR_XFER_xxx. | |
328 | */ | |
329 | int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, | |
330 | u8 request, u8 requesttype, u16 value, u16 index, | |
331 | void *data, u16 size) | |
332 | { | |
333 | int result; | |
334 | ||
335 | US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", | |
441b62c1 | 336 | __func__, request, requesttype, |
1da177e4 LT |
337 | value, index, size); |
338 | ||
339 | /* fill in the devrequest structure */ | |
340 | us->cr->bRequestType = requesttype; | |
341 | us->cr->bRequest = request; | |
342 | us->cr->wValue = cpu_to_le16(value); | |
343 | us->cr->wIndex = cpu_to_le16(index); | |
344 | us->cr->wLength = cpu_to_le16(size); | |
345 | ||
346 | /* fill and submit the URB */ | |
347 | usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe, | |
348 | (unsigned char*) us->cr, data, size, | |
349 | usb_stor_blocking_completion, NULL); | |
350 | result = usb_stor_msg_common(us, 0); | |
351 | ||
352 | return interpret_urb_result(us, pipe, size, result, | |
353 | us->current_urb->actual_length); | |
354 | } | |
e6e244b6 | 355 | EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer); |
1da177e4 LT |
356 | |
357 | /* | |
358 | * Receive one interrupt buffer, without timeouts, but allowing early | |
359 | * termination. Return codes are USB_STOR_XFER_xxx. | |
360 | * | |
361 | * This routine always uses us->recv_intr_pipe as the pipe and | |
362 | * us->ep_bInterval as the interrupt interval. | |
363 | */ | |
364 | static int usb_stor_intr_transfer(struct us_data *us, void *buf, | |
365 | unsigned int length) | |
366 | { | |
367 | int result; | |
368 | unsigned int pipe = us->recv_intr_pipe; | |
369 | unsigned int maxp; | |
370 | ||
441b62c1 | 371 | US_DEBUGP("%s: xfer %u bytes\n", __func__, length); |
1da177e4 LT |
372 | |
373 | /* calculate the max packet size */ | |
374 | maxp = usb_maxpacket(us->pusb_dev, pipe, usb_pipeout(pipe)); | |
375 | if (maxp > length) | |
376 | maxp = length; | |
377 | ||
378 | /* fill and submit the URB */ | |
379 | usb_fill_int_urb(us->current_urb, us->pusb_dev, pipe, buf, | |
380 | maxp, usb_stor_blocking_completion, NULL, | |
381 | us->ep_bInterval); | |
382 | result = usb_stor_msg_common(us, 0); | |
383 | ||
384 | return interpret_urb_result(us, pipe, length, result, | |
385 | us->current_urb->actual_length); | |
386 | } | |
387 | ||
388 | /* | |
389 | * Transfer one buffer via bulk pipe, without timeouts, but allowing early | |
390 | * termination. Return codes are USB_STOR_XFER_xxx. If the bulk pipe | |
391 | * stalls during the transfer, the halt is automatically cleared. | |
392 | */ | |
393 | int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, | |
394 | void *buf, unsigned int length, unsigned int *act_len) | |
395 | { | |
396 | int result; | |
397 | ||
441b62c1 | 398 | US_DEBUGP("%s: xfer %u bytes\n", __func__, length); |
1da177e4 LT |
399 | |
400 | /* fill and submit the URB */ | |
401 | usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length, | |
402 | usb_stor_blocking_completion, NULL); | |
403 | result = usb_stor_msg_common(us, 0); | |
404 | ||
405 | /* store the actual length of the data transferred */ | |
406 | if (act_len) | |
407 | *act_len = us->current_urb->actual_length; | |
408 | return interpret_urb_result(us, pipe, length, result, | |
409 | us->current_urb->actual_length); | |
410 | } | |
e6e244b6 | 411 | EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf); |
1da177e4 LT |
412 | |
413 | /* | |
414 | * Transfer a scatter-gather list via bulk transfer | |
415 | * | |
416 | * This function does basically the same thing as usb_stor_bulk_transfer_buf() | |
417 | * above, but it uses the usbcore scatter-gather library. | |
418 | */ | |
419 | static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe, | |
420 | struct scatterlist *sg, int num_sg, unsigned int length, | |
421 | unsigned int *act_len) | |
422 | { | |
423 | int result; | |
424 | ||
543f7810 AS |
425 | /* don't submit s-g requests during abort processing */ |
426 | if (test_bit(US_FLIDX_ABORTING, &us->dflags)) | |
1da177e4 LT |
427 | return USB_STOR_XFER_ERROR; |
428 | ||
429 | /* initialize the scatter-gather request block */ | |
441b62c1 | 430 | US_DEBUGP("%s: xfer %u bytes, %d entries\n", __func__, |
1da177e4 LT |
431 | length, num_sg); |
432 | result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0, | |
55acbda0 | 433 | sg, num_sg, length, GFP_NOIO); |
1da177e4 LT |
434 | if (result) { |
435 | US_DEBUGP("usb_sg_init returned %d\n", result); | |
436 | return USB_STOR_XFER_ERROR; | |
437 | } | |
438 | ||
439 | /* since the block has been initialized successfully, it's now | |
440 | * okay to cancel it */ | |
7e4d6c38 | 441 | set_bit(US_FLIDX_SG_ACTIVE, &us->dflags); |
1da177e4 | 442 | |
543f7810 AS |
443 | /* did an abort occur during the submission? */ |
444 | if (test_bit(US_FLIDX_ABORTING, &us->dflags)) { | |
1da177e4 LT |
445 | |
446 | /* cancel the request, if it hasn't been cancelled already */ | |
7e4d6c38 | 447 | if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) { |
1da177e4 LT |
448 | US_DEBUGP("-- cancelling sg request\n"); |
449 | usb_sg_cancel(&us->current_sg); | |
450 | } | |
451 | } | |
452 | ||
453 | /* wait for the completion of the transfer */ | |
454 | usb_sg_wait(&us->current_sg); | |
7e4d6c38 | 455 | clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags); |
1da177e4 LT |
456 | |
457 | result = us->current_sg.status; | |
458 | if (act_len) | |
459 | *act_len = us->current_sg.bytes; | |
460 | return interpret_urb_result(us, pipe, length, result, | |
461 | us->current_sg.bytes); | |
462 | } | |
463 | ||
6d416e61 BH |
464 | /* |
465 | * Common used function. Transfer a complete command | |
466 | * via usb_stor_bulk_transfer_sglist() above. Set cmnd resid | |
467 | */ | |
468 | int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe, | |
469 | struct scsi_cmnd* srb) | |
470 | { | |
471 | unsigned int partial; | |
472 | int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb), | |
473 | scsi_sg_count(srb), scsi_bufflen(srb), | |
474 | &partial); | |
475 | ||
476 | scsi_set_resid(srb, scsi_bufflen(srb) - partial); | |
477 | return result; | |
478 | } | |
e6e244b6 | 479 | EXPORT_SYMBOL_GPL(usb_stor_bulk_srb); |
6d416e61 | 480 | |
1da177e4 LT |
481 | /* |
482 | * Transfer an entire SCSI command's worth of data payload over the bulk | |
483 | * pipe. | |
484 | * | |
485 | * Note that this uses usb_stor_bulk_transfer_buf() and | |
486 | * usb_stor_bulk_transfer_sglist() to achieve its goals -- | |
487 | * this function simply determines whether we're going to use | |
488 | * scatter-gather or not, and acts appropriately. | |
489 | */ | |
490 | int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe, | |
491 | void *buf, unsigned int length_left, int use_sg, int *residual) | |
492 | { | |
493 | int result; | |
494 | unsigned int partial; | |
495 | ||
496 | /* are we scatter-gathering? */ | |
497 | if (use_sg) { | |
498 | /* use the usb core scatter-gather primitives */ | |
499 | result = usb_stor_bulk_transfer_sglist(us, pipe, | |
500 | (struct scatterlist *) buf, use_sg, | |
501 | length_left, &partial); | |
502 | length_left -= partial; | |
503 | } else { | |
504 | /* no scatter-gather, just make the request */ | |
505 | result = usb_stor_bulk_transfer_buf(us, pipe, buf, | |
506 | length_left, &partial); | |
507 | length_left -= partial; | |
508 | } | |
509 | ||
510 | /* store the residual and return the error code */ | |
511 | if (residual) | |
512 | *residual = length_left; | |
513 | return result; | |
514 | } | |
e6e244b6 | 515 | EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg); |
1da177e4 LT |
516 | |
517 | /*********************************************************************** | |
518 | * Transport routines | |
519 | ***********************************************************************/ | |
520 | ||
25ff1c31 AS |
521 | /* There are so many devices that report the capacity incorrectly, |
522 | * this routine was written to counteract some of the resulting | |
523 | * problems. | |
524 | */ | |
525 | static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb) | |
526 | { | |
527 | struct gendisk *disk; | |
528 | struct scsi_disk *sdkp; | |
529 | u32 sector; | |
530 | ||
531 | /* To Report "Medium Error: Record Not Found */ | |
532 | static unsigned char record_not_found[18] = { | |
533 | [0] = 0x70, /* current error */ | |
534 | [2] = MEDIUM_ERROR, /* = 0x03 */ | |
535 | [7] = 0x0a, /* additional length */ | |
536 | [12] = 0x14 /* Record Not Found */ | |
537 | }; | |
538 | ||
539 | /* If last-sector problems can't occur, whether because the | |
540 | * capacity was already decremented or because the device is | |
541 | * known to report the correct capacity, then we don't need | |
542 | * to do anything. | |
543 | */ | |
544 | if (!us->use_last_sector_hacks) | |
545 | return; | |
546 | ||
547 | /* Was this command a READ(10) or a WRITE(10)? */ | |
548 | if (srb->cmnd[0] != READ_10 && srb->cmnd[0] != WRITE_10) | |
549 | goto done; | |
550 | ||
551 | /* Did this command access the last sector? */ | |
552 | sector = (srb->cmnd[2] << 24) | (srb->cmnd[3] << 16) | | |
553 | (srb->cmnd[4] << 8) | (srb->cmnd[5]); | |
554 | disk = srb->request->rq_disk; | |
555 | if (!disk) | |
556 | goto done; | |
557 | sdkp = scsi_disk(disk); | |
558 | if (!sdkp) | |
559 | goto done; | |
560 | if (sector + 1 != sdkp->capacity) | |
561 | goto done; | |
562 | ||
563 | if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) { | |
564 | ||
0d020aae AS |
565 | /* The command succeeded. We know this device doesn't |
566 | * have the last-sector bug, so stop checking it. | |
25ff1c31 | 567 | */ |
0d020aae | 568 | us->use_last_sector_hacks = 0; |
25ff1c31 AS |
569 | |
570 | } else { | |
571 | /* The command failed. Allow up to 3 retries in case this | |
572 | * is some normal sort of failure. After that, assume the | |
573 | * capacity is wrong and we're trying to access the sector | |
574 | * beyond the end. Replace the result code and sense data | |
575 | * with values that will cause the SCSI core to fail the | |
576 | * command immediately, instead of going into an infinite | |
577 | * (or even just a very long) retry loop. | |
578 | */ | |
579 | if (++us->last_sector_retries < 3) | |
580 | return; | |
581 | srb->result = SAM_STAT_CHECK_CONDITION; | |
582 | memcpy(srb->sense_buffer, record_not_found, | |
583 | sizeof(record_not_found)); | |
25ff1c31 AS |
584 | } |
585 | ||
586 | done: | |
587 | /* Don't reset the retry counter for TEST UNIT READY commands, | |
588 | * because they get issued after device resets which might be | |
589 | * caused by a failed last-sector access. | |
590 | */ | |
591 | if (srb->cmnd[0] != TEST_UNIT_READY) | |
592 | us->last_sector_retries = 0; | |
593 | } | |
594 | ||
1da177e4 LT |
595 | /* Invoke the transport and basic error-handling/recovery methods |
596 | * | |
597 | * This is used by the protocol layers to actually send the message to | |
598 | * the device and receive the response. | |
599 | */ | |
600 | void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) | |
601 | { | |
602 | int need_auto_sense; | |
603 | int result; | |
604 | ||
605 | /* send the command to the transport layer */ | |
6d416e61 | 606 | scsi_set_resid(srb, 0); |
1da177e4 LT |
607 | result = us->transport(srb, us); |
608 | ||
609 | /* if the command gets aborted by the higher layers, we need to | |
610 | * short-circuit all other processing | |
611 | */ | |
7e4d6c38 | 612 | if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { |
1da177e4 | 613 | US_DEBUGP("-- command was aborted\n"); |
4d07ef76 MD |
614 | srb->result = DID_ABORT << 16; |
615 | goto Handle_Errors; | |
1da177e4 LT |
616 | } |
617 | ||
618 | /* if there is a transport error, reset and don't auto-sense */ | |
619 | if (result == USB_STOR_TRANSPORT_ERROR) { | |
620 | US_DEBUGP("-- transport indicates error, resetting\n"); | |
1da177e4 | 621 | srb->result = DID_ERROR << 16; |
4d07ef76 | 622 | goto Handle_Errors; |
1da177e4 LT |
623 | } |
624 | ||
625 | /* if the transport provided its own sense data, don't auto-sense */ | |
626 | if (result == USB_STOR_TRANSPORT_NO_SENSE) { | |
627 | srb->result = SAM_STAT_CHECK_CONDITION; | |
25ff1c31 | 628 | last_sector_hacks(us, srb); |
1da177e4 LT |
629 | return; |
630 | } | |
631 | ||
632 | srb->result = SAM_STAT_GOOD; | |
633 | ||
634 | /* Determine if we need to auto-sense | |
635 | * | |
636 | * I normally don't use a flag like this, but it's almost impossible | |
637 | * to understand what's going on here if I don't. | |
638 | */ | |
639 | need_auto_sense = 0; | |
640 | ||
641 | /* | |
642 | * If we're running the CB transport, which is incapable | |
643 | * of determining status on its own, we will auto-sense | |
644 | * unless the operation involved a data-in transfer. Devices | |
645 | * can signal most data-in errors by stalling the bulk-in pipe. | |
646 | */ | |
647 | if ((us->protocol == US_PR_CB || us->protocol == US_PR_DPCM_USB) && | |
648 | srb->sc_data_direction != DMA_FROM_DEVICE) { | |
649 | US_DEBUGP("-- CB transport device requiring auto-sense\n"); | |
650 | need_auto_sense = 1; | |
651 | } | |
652 | ||
653 | /* | |
654 | * If we have a failure, we're going to do a REQUEST_SENSE | |
655 | * automatically. Note that we differentiate between a command | |
656 | * "failure" and an "error" in the transport mechanism. | |
657 | */ | |
658 | if (result == USB_STOR_TRANSPORT_FAILED) { | |
659 | US_DEBUGP("-- transport indicates command failure\n"); | |
660 | need_auto_sense = 1; | |
661 | } | |
662 | ||
1537e0ad BE |
663 | /* |
664 | * Determine if this device is SAT by seeing if the | |
665 | * command executed successfully. Otherwise we'll have | |
666 | * to wait for at least one CHECK_CONDITION to determine | |
667 | * SANE_SENSE support | |
668 | */ | |
669 | if ((srb->cmnd[0] == ATA_16 || srb->cmnd[0] == ATA_12) && | |
670 | result == USB_STOR_TRANSPORT_GOOD && | |
671 | !(us->fflags & US_FL_SANE_SENSE) && | |
672 | !(srb->cmnd[2] & 0x20)) { | |
673 | US_DEBUGP("-- SAT supported, increasing auto-sense\n"); | |
674 | us->fflags |= US_FL_SANE_SENSE; | |
675 | } | |
676 | ||
1da177e4 LT |
677 | /* |
678 | * A short transfer on a command where we don't expect it | |
679 | * is unusual, but it doesn't mean we need to auto-sense. | |
680 | */ | |
6d416e61 | 681 | if ((scsi_get_resid(srb) > 0) && |
1da177e4 LT |
682 | !((srb->cmnd[0] == REQUEST_SENSE) || |
683 | (srb->cmnd[0] == INQUIRY) || | |
684 | (srb->cmnd[0] == MODE_SENSE) || | |
685 | (srb->cmnd[0] == LOG_SENSE) || | |
686 | (srb->cmnd[0] == MODE_SENSE_10))) { | |
687 | US_DEBUGP("-- unexpectedly short transfer\n"); | |
688 | } | |
689 | ||
690 | /* Now, if we need to do the auto-sense, let's do it */ | |
691 | if (need_auto_sense) { | |
692 | int temp_result; | |
dff6de73 | 693 | struct scsi_eh_save ses; |
1537e0ad BE |
694 | int sense_size = US_SENSE_SIZE; |
695 | ||
696 | /* device supports and needs bigger sense buffer */ | |
697 | if (us->fflags & US_FL_SANE_SENSE) | |
698 | sense_size = ~0; | |
1da177e4 LT |
699 | |
700 | US_DEBUGP("Issuing auto-REQUEST_SENSE\n"); | |
701 | ||
1537e0ad | 702 | scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size); |
1da177e4 LT |
703 | |
704 | /* FIXME: we must do the protocol translation here */ | |
d277064e MC |
705 | if (us->subclass == US_SC_RBC || us->subclass == US_SC_SCSI || |
706 | us->subclass == US_SC_CYP_ATACB) | |
1da177e4 LT |
707 | srb->cmd_len = 6; |
708 | else | |
709 | srb->cmd_len = 12; | |
710 | ||
1da177e4 | 711 | /* issue the auto-sense command */ |
6d416e61 | 712 | scsi_set_resid(srb, 0); |
1da177e4 LT |
713 | temp_result = us->transport(us->srb, us); |
714 | ||
715 | /* let's clean up right away */ | |
dff6de73 | 716 | scsi_eh_restore_cmnd(srb, &ses); |
1da177e4 | 717 | |
7e4d6c38 | 718 | if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { |
1da177e4 | 719 | US_DEBUGP("-- auto-sense aborted\n"); |
4d07ef76 MD |
720 | srb->result = DID_ABORT << 16; |
721 | goto Handle_Errors; | |
1da177e4 LT |
722 | } |
723 | if (temp_result != USB_STOR_TRANSPORT_GOOD) { | |
724 | US_DEBUGP("-- auto-sense failure\n"); | |
725 | ||
726 | /* we skip the reset if this happens to be a | |
727 | * multi-target device, since failure of an | |
728 | * auto-sense is perfectly valid | |
729 | */ | |
1da177e4 | 730 | srb->result = DID_ERROR << 16; |
7e4d6c38 | 731 | if (!(us->fflags & US_FL_SCM_MULT_TARG)) |
4d07ef76 | 732 | goto Handle_Errors; |
1da177e4 LT |
733 | return; |
734 | } | |
735 | ||
1537e0ad BE |
736 | /* If the sense data returned is larger than 18-bytes then we |
737 | * assume this device supports requesting more in the future. | |
738 | * The response code must be 70h through 73h inclusive. | |
739 | */ | |
740 | if (srb->sense_buffer[7] > (US_SENSE_SIZE - 8) && | |
741 | !(us->fflags & US_FL_SANE_SENSE) && | |
742 | (srb->sense_buffer[0] & 0x7C) == 0x70) { | |
743 | US_DEBUGP("-- SANE_SENSE support enabled\n"); | |
744 | us->fflags |= US_FL_SANE_SENSE; | |
745 | ||
746 | /* Indicate to the user that we truncated their sense | |
747 | * because we didn't know it supported larger sense. | |
748 | */ | |
749 | US_DEBUGP("-- Sense data truncated to %i from %i\n", | |
750 | US_SENSE_SIZE, | |
751 | srb->sense_buffer[7] + 8); | |
752 | srb->sense_buffer[7] = (US_SENSE_SIZE - 8); | |
753 | } | |
754 | ||
1da177e4 LT |
755 | US_DEBUGP("-- Result from auto-sense is %d\n", temp_result); |
756 | US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n", | |
757 | srb->sense_buffer[0], | |
758 | srb->sense_buffer[2] & 0xf, | |
759 | srb->sense_buffer[12], | |
760 | srb->sense_buffer[13]); | |
761 | #ifdef CONFIG_USB_STORAGE_DEBUG | |
762 | usb_stor_show_sense( | |
763 | srb->sense_buffer[2] & 0xf, | |
764 | srb->sense_buffer[12], | |
765 | srb->sense_buffer[13]); | |
766 | #endif | |
767 | ||
768 | /* set the result so the higher layers expect this data */ | |
769 | srb->result = SAM_STAT_CHECK_CONDITION; | |
770 | ||
771 | /* If things are really okay, then let's show that. Zero | |
772 | * out the sense buffer so the higher layers won't realize | |
773 | * we did an unsolicited auto-sense. */ | |
774 | if (result == USB_STOR_TRANSPORT_GOOD && | |
775 | /* Filemark 0, ignore EOM, ILI 0, no sense */ | |
776 | (srb->sense_buffer[2] & 0xaf) == 0 && | |
777 | /* No ASC or ASCQ */ | |
778 | srb->sense_buffer[12] == 0 && | |
779 | srb->sense_buffer[13] == 0) { | |
780 | srb->result = SAM_STAT_GOOD; | |
781 | srb->sense_buffer[0] = 0x0; | |
782 | } | |
783 | } | |
784 | ||
785 | /* Did we transfer less than the minimum amount required? */ | |
8bfa2472 | 786 | if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) && |
6d416e61 | 787 | scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow) |
1c9fbafc | 788 | srb->result = DID_ERROR << 16; |
1da177e4 | 789 | |
25ff1c31 | 790 | last_sector_hacks(us, srb); |
1da177e4 LT |
791 | return; |
792 | ||
4d07ef76 MD |
793 | /* Error and abort processing: try to resynchronize with the device |
794 | * by issuing a port reset. If that fails, try a class-specific | |
795 | * device reset. */ | |
796 | Handle_Errors: | |
797 | ||
47104b0d AS |
798 | /* Set the RESETTING bit, and clear the ABORTING bit so that |
799 | * the reset may proceed. */ | |
4d07ef76 | 800 | scsi_lock(us_to_host(us)); |
7e4d6c38 AS |
801 | set_bit(US_FLIDX_RESETTING, &us->dflags); |
802 | clear_bit(US_FLIDX_ABORTING, &us->dflags); | |
4d07ef76 MD |
803 | scsi_unlock(us_to_host(us)); |
804 | ||
47104b0d AS |
805 | /* We must release the device lock because the pre_reset routine |
806 | * will want to acquire it. */ | |
807 | mutex_unlock(&us->dev_mutex); | |
4d07ef76 | 808 | result = usb_stor_port_reset(us); |
47104b0d AS |
809 | mutex_lock(&us->dev_mutex); |
810 | ||
4d07ef76 MD |
811 | if (result < 0) { |
812 | scsi_lock(us_to_host(us)); | |
813 | usb_stor_report_device_reset(us); | |
814 | scsi_unlock(us_to_host(us)); | |
1da177e4 | 815 | us->transport_reset(us); |
4d07ef76 | 816 | } |
7e4d6c38 | 817 | clear_bit(US_FLIDX_RESETTING, &us->dflags); |
25ff1c31 | 818 | last_sector_hacks(us, srb); |
1da177e4 LT |
819 | } |
820 | ||
821 | /* Stop the current URB transfer */ | |
822 | void usb_stor_stop_transport(struct us_data *us) | |
823 | { | |
441b62c1 | 824 | US_DEBUGP("%s called\n", __func__); |
1da177e4 LT |
825 | |
826 | /* If the state machine is blocked waiting for an URB, | |
827 | * let's wake it up. The test_and_clear_bit() call | |
828 | * guarantees that if a URB has just been submitted, | |
829 | * it won't be cancelled more than once. */ | |
7e4d6c38 | 830 | if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) { |
1da177e4 LT |
831 | US_DEBUGP("-- cancelling URB\n"); |
832 | usb_unlink_urb(us->current_urb); | |
833 | } | |
834 | ||
835 | /* If we are waiting for a scatter-gather operation, cancel it. */ | |
7e4d6c38 | 836 | if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) { |
1da177e4 LT |
837 | US_DEBUGP("-- cancelling sg request\n"); |
838 | usb_sg_cancel(&us->current_sg); | |
839 | } | |
840 | } | |
841 | ||
842 | /* | |
64648a9d | 843 | * Control/Bulk and Control/Bulk/Interrupt transport |
1da177e4 LT |
844 | */ |
845 | ||
64648a9d | 846 | int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) |
1da177e4 | 847 | { |
6d416e61 | 848 | unsigned int transfer_length = scsi_bufflen(srb); |
1da177e4 LT |
849 | unsigned int pipe = 0; |
850 | int result; | |
851 | ||
852 | /* COMMAND STAGE */ | |
853 | /* let's send the command via the control pipe */ | |
854 | result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, | |
855 | US_CBI_ADSC, | |
856 | USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, | |
857 | us->ifnum, srb->cmnd, srb->cmd_len); | |
858 | ||
859 | /* check the return code for the command */ | |
860 | US_DEBUGP("Call to usb_stor_ctrl_transfer() returned %d\n", result); | |
861 | ||
862 | /* if we stalled the command, it means command failed */ | |
863 | if (result == USB_STOR_XFER_STALLED) { | |
864 | return USB_STOR_TRANSPORT_FAILED; | |
865 | } | |
866 | ||
867 | /* Uh oh... serious problem here */ | |
868 | if (result != USB_STOR_XFER_GOOD) { | |
869 | return USB_STOR_TRANSPORT_ERROR; | |
870 | } | |
871 | ||
872 | /* DATA STAGE */ | |
873 | /* transfer the data payload for this command, if one exists*/ | |
874 | if (transfer_length) { | |
875 | pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? | |
876 | us->recv_bulk_pipe : us->send_bulk_pipe; | |
6d416e61 | 877 | result = usb_stor_bulk_srb(us, pipe, srb); |
1da177e4 LT |
878 | US_DEBUGP("CBI data stage result is 0x%x\n", result); |
879 | ||
880 | /* if we stalled the data transfer it means command failed */ | |
881 | if (result == USB_STOR_XFER_STALLED) | |
882 | return USB_STOR_TRANSPORT_FAILED; | |
883 | if (result > USB_STOR_XFER_STALLED) | |
884 | return USB_STOR_TRANSPORT_ERROR; | |
885 | } | |
886 | ||
887 | /* STATUS STAGE */ | |
64648a9d AS |
888 | |
889 | /* NOTE: CB does not have a status stage. Silly, I know. So | |
890 | * we have to catch this at a higher level. | |
891 | */ | |
892 | if (us->protocol != US_PR_CBI) | |
893 | return USB_STOR_TRANSPORT_GOOD; | |
894 | ||
1da177e4 LT |
895 | result = usb_stor_intr_transfer(us, us->iobuf, 2); |
896 | US_DEBUGP("Got interrupt data (0x%x, 0x%x)\n", | |
897 | us->iobuf[0], us->iobuf[1]); | |
898 | if (result != USB_STOR_XFER_GOOD) | |
899 | return USB_STOR_TRANSPORT_ERROR; | |
900 | ||
901 | /* UFI gives us ASC and ASCQ, like a request sense | |
902 | * | |
903 | * REQUEST_SENSE and INQUIRY don't affect the sense data on UFI | |
904 | * devices, so we ignore the information for those commands. Note | |
905 | * that this means we could be ignoring a real error on these | |
906 | * commands, but that can't be helped. | |
907 | */ | |
908 | if (us->subclass == US_SC_UFI) { | |
909 | if (srb->cmnd[0] == REQUEST_SENSE || | |
910 | srb->cmnd[0] == INQUIRY) | |
911 | return USB_STOR_TRANSPORT_GOOD; | |
912 | if (us->iobuf[0]) | |
913 | goto Failed; | |
914 | return USB_STOR_TRANSPORT_GOOD; | |
915 | } | |
916 | ||
917 | /* If not UFI, we interpret the data as a result code | |
918 | * The first byte should always be a 0x0. | |
919 | * | |
920 | * Some bogus devices don't follow that rule. They stuff the ASC | |
921 | * into the first byte -- so if it's non-zero, call it a failure. | |
922 | */ | |
923 | if (us->iobuf[0]) { | |
924 | US_DEBUGP("CBI IRQ data showed reserved bType 0x%x\n", | |
925 | us->iobuf[0]); | |
926 | goto Failed; | |
927 | ||
928 | } | |
929 | ||
930 | /* The second byte & 0x0F should be 0x0 for good, otherwise error */ | |
931 | switch (us->iobuf[1] & 0x0F) { | |
932 | case 0x00: | |
933 | return USB_STOR_TRANSPORT_GOOD; | |
934 | case 0x01: | |
935 | goto Failed; | |
936 | } | |
937 | return USB_STOR_TRANSPORT_ERROR; | |
938 | ||
939 | /* the CBI spec requires that the bulk pipe must be cleared | |
940 | * following any data-in/out command failure (section 2.4.3.1.3) | |
941 | */ | |
942 | Failed: | |
943 | if (pipe) | |
944 | usb_stor_clear_halt(us, pipe); | |
945 | return USB_STOR_TRANSPORT_FAILED; | |
946 | } | |
e6e244b6 | 947 | EXPORT_SYMBOL_GPL(usb_stor_CB_transport); |
1da177e4 | 948 | |
1da177e4 LT |
949 | /* |
950 | * Bulk only transport | |
951 | */ | |
952 | ||
953 | /* Determine what the maximum LUN supported is */ | |
954 | int usb_stor_Bulk_max_lun(struct us_data *us) | |
955 | { | |
956 | int result; | |
957 | ||
958 | /* issue the command */ | |
b876aef7 | 959 | us->iobuf[0] = 0; |
1da177e4 LT |
960 | result = usb_stor_control_msg(us, us->recv_ctrl_pipe, |
961 | US_BULK_GET_MAX_LUN, | |
962 | USB_DIR_IN | USB_TYPE_CLASS | | |
963 | USB_RECIP_INTERFACE, | |
7a777919 | 964 | 0, us->ifnum, us->iobuf, 1, 10*HZ); |
1da177e4 LT |
965 | |
966 | US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", | |
967 | result, us->iobuf[0]); | |
968 | ||
969 | /* if we have a successful request, return the result */ | |
970 | if (result > 0) | |
971 | return us->iobuf[0]; | |
972 | ||
1da177e4 LT |
973 | /* |
974 | * Some devices don't like GetMaxLUN. They may STALL the control | |
975 | * pipe, they may return a zero-length result, they may do nothing at | |
976 | * all and timeout, or they may fail in even more bizarrely creative | |
977 | * ways. In these cases the best approach is to use the default | |
978 | * value: only one LUN. | |
979 | */ | |
980 | return 0; | |
981 | } | |
982 | ||
983 | int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) | |
984 | { | |
985 | struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; | |
986 | struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; | |
6d416e61 | 987 | unsigned int transfer_length = scsi_bufflen(srb); |
1da177e4 LT |
988 | unsigned int residue; |
989 | int result; | |
990 | int fake_sense = 0; | |
991 | unsigned int cswlen; | |
992 | unsigned int cbwlen = US_BULK_CB_WRAP_LEN; | |
993 | ||
994 | /* Take care of BULK32 devices; set extra byte to 0 */ | |
7e4d6c38 | 995 | if (unlikely(us->fflags & US_FL_BULK32)) { |
1da177e4 LT |
996 | cbwlen = 32; |
997 | us->iobuf[31] = 0; | |
998 | } | |
999 | ||
1000 | /* set up the command wrapper */ | |
1001 | bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); | |
1002 | bcb->DataTransferLength = cpu_to_le32(transfer_length); | |
1003 | bcb->Flags = srb->sc_data_direction == DMA_FROM_DEVICE ? 1 << 7 : 0; | |
0f64e078 | 1004 | bcb->Tag = ++us->tag; |
1da177e4 | 1005 | bcb->Lun = srb->device->lun; |
7e4d6c38 | 1006 | if (us->fflags & US_FL_SCM_MULT_TARG) |
1da177e4 LT |
1007 | bcb->Lun |= srb->device->id << 4; |
1008 | bcb->Length = srb->cmd_len; | |
1009 | ||
1010 | /* copy the command payload */ | |
1011 | memset(bcb->CDB, 0, sizeof(bcb->CDB)); | |
1012 | memcpy(bcb->CDB, srb->cmnd, bcb->Length); | |
1013 | ||
1014 | /* send it to out endpoint */ | |
1015 | US_DEBUGP("Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n", | |
1016 | le32_to_cpu(bcb->Signature), bcb->Tag, | |
1017 | le32_to_cpu(bcb->DataTransferLength), bcb->Flags, | |
1018 | (bcb->Lun >> 4), (bcb->Lun & 0x0F), | |
1019 | bcb->Length); | |
1020 | result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | |
1021 | bcb, cbwlen, NULL); | |
1022 | US_DEBUGP("Bulk command transfer result=%d\n", result); | |
1023 | if (result != USB_STOR_XFER_GOOD) | |
1024 | return USB_STOR_TRANSPORT_ERROR; | |
1025 | ||
1026 | /* DATA STAGE */ | |
1027 | /* send/receive data payload, if there is any */ | |
1028 | ||
1029 | /* Some USB-IDE converter chips need a 100us delay between the | |
1030 | * command phase and the data phase. Some devices need a little | |
1031 | * more than that, probably because of clock rate inaccuracies. */ | |
7e4d6c38 | 1032 | if (unlikely(us->fflags & US_FL_GO_SLOW)) |
e4334fa4 | 1033 | udelay(125); |
1da177e4 LT |
1034 | |
1035 | if (transfer_length) { | |
1036 | unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? | |
1037 | us->recv_bulk_pipe : us->send_bulk_pipe; | |
6d416e61 | 1038 | result = usb_stor_bulk_srb(us, pipe, srb); |
1da177e4 LT |
1039 | US_DEBUGP("Bulk data transfer result 0x%x\n", result); |
1040 | if (result == USB_STOR_XFER_ERROR) | |
1041 | return USB_STOR_TRANSPORT_ERROR; | |
1042 | ||
1043 | /* If the device tried to send back more data than the | |
1044 | * amount requested, the spec requires us to transfer | |
1045 | * the CSW anyway. Since there's no point retrying the | |
1046 | * the command, we'll return fake sense data indicating | |
1047 | * Illegal Request, Invalid Field in CDB. | |
1048 | */ | |
1049 | if (result == USB_STOR_XFER_LONG) | |
1050 | fake_sense = 1; | |
1051 | } | |
1052 | ||
1053 | /* See flow chart on pg 15 of the Bulk Only Transport spec for | |
1054 | * an explanation of how this code works. | |
1055 | */ | |
1056 | ||
1057 | /* get CSW for device status */ | |
1058 | US_DEBUGP("Attempting to get CSW...\n"); | |
1059 | result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, | |
1060 | bcs, US_BULK_CS_WRAP_LEN, &cswlen); | |
1061 | ||
1062 | /* Some broken devices add unnecessary zero-length packets to the | |
1063 | * end of their data transfers. Such packets show up as 0-length | |
1064 | * CSWs. If we encounter such a thing, try to read the CSW again. | |
1065 | */ | |
1066 | if (result == USB_STOR_XFER_SHORT && cswlen == 0) { | |
1067 | US_DEBUGP("Received 0-length CSW; retrying...\n"); | |
1068 | result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, | |
1069 | bcs, US_BULK_CS_WRAP_LEN, &cswlen); | |
1070 | } | |
1071 | ||
1072 | /* did the attempt to read the CSW fail? */ | |
1073 | if (result == USB_STOR_XFER_STALLED) { | |
1074 | ||
1075 | /* get the status again */ | |
1076 | US_DEBUGP("Attempting to get CSW (2nd try)...\n"); | |
1077 | result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, | |
1078 | bcs, US_BULK_CS_WRAP_LEN, NULL); | |
1079 | } | |
1080 | ||
1081 | /* if we still have a failure at this point, we're in trouble */ | |
1082 | US_DEBUGP("Bulk status result = %d\n", result); | |
1083 | if (result != USB_STOR_XFER_GOOD) | |
1084 | return USB_STOR_TRANSPORT_ERROR; | |
1085 | ||
1086 | /* check bulk status */ | |
1087 | residue = le32_to_cpu(bcs->Residue); | |
1088 | US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", | |
1089 | le32_to_cpu(bcs->Signature), bcs->Tag, | |
1090 | residue, bcs->Status); | |
7e4d6c38 | 1091 | if (!(bcs->Tag == us->tag || (us->fflags & US_FL_BULK_IGNORE_TAG)) || |
cc36bdd4 | 1092 | bcs->Status > US_BULK_STAT_PHASE) { |
1da177e4 LT |
1093 | US_DEBUGP("Bulk logical error\n"); |
1094 | return USB_STOR_TRANSPORT_ERROR; | |
1095 | } | |
1096 | ||
1097 | /* Some broken devices report odd signatures, so we do not check them | |
1098 | * for validity against the spec. We store the first one we see, | |
1099 | * and check subsequent transfers for validity against this signature. | |
1100 | */ | |
1101 | if (!us->bcs_signature) { | |
1102 | us->bcs_signature = bcs->Signature; | |
1103 | if (us->bcs_signature != cpu_to_le32(US_BULK_CS_SIGN)) | |
1104 | US_DEBUGP("Learnt BCS signature 0x%08X\n", | |
1105 | le32_to_cpu(us->bcs_signature)); | |
1106 | } else if (bcs->Signature != us->bcs_signature) { | |
1107 | US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n", | |
1108 | le32_to_cpu(bcs->Signature), | |
1109 | le32_to_cpu(us->bcs_signature)); | |
1110 | return USB_STOR_TRANSPORT_ERROR; | |
1111 | } | |
1112 | ||
1113 | /* try to compute the actual residue, based on how much data | |
1114 | * was really transferred and what the device tells us */ | |
59f4ff2e AS |
1115 | if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) { |
1116 | ||
1117 | /* Heuristically detect devices that generate bogus residues | |
1118 | * by seeing what happens with INQUIRY and READ CAPACITY | |
1119 | * commands. | |
1120 | */ | |
1121 | if (bcs->Status == US_BULK_STAT_OK && | |
1122 | scsi_get_resid(srb) == 0 && | |
1123 | ((srb->cmnd[0] == INQUIRY && | |
1124 | transfer_length == 36) || | |
1125 | (srb->cmnd[0] == READ_CAPACITY && | |
1126 | transfer_length == 8))) { | |
1127 | us->fflags |= US_FL_IGNORE_RESIDUE; | |
1128 | ||
1129 | } else { | |
1da177e4 | 1130 | residue = min(residue, transfer_length); |
6d416e61 BH |
1131 | scsi_set_resid(srb, max(scsi_get_resid(srb), |
1132 | (int) residue)); | |
1da177e4 LT |
1133 | } |
1134 | } | |
1135 | ||
1136 | /* based on the status code, we report good or bad */ | |
1137 | switch (bcs->Status) { | |
1138 | case US_BULK_STAT_OK: | |
1139 | /* device babbled -- return fake sense data */ | |
1140 | if (fake_sense) { | |
1141 | memcpy(srb->sense_buffer, | |
1142 | usb_stor_sense_invalidCDB, | |
1143 | sizeof(usb_stor_sense_invalidCDB)); | |
1144 | return USB_STOR_TRANSPORT_NO_SENSE; | |
1145 | } | |
1146 | ||
1147 | /* command good -- note that data could be short */ | |
1148 | return USB_STOR_TRANSPORT_GOOD; | |
1149 | ||
1150 | case US_BULK_STAT_FAIL: | |
1151 | /* command failed */ | |
1152 | return USB_STOR_TRANSPORT_FAILED; | |
1153 | ||
1154 | case US_BULK_STAT_PHASE: | |
1155 | /* phase error -- note that a transport reset will be | |
1156 | * invoked by the invoke_transport() function | |
1157 | */ | |
1158 | return USB_STOR_TRANSPORT_ERROR; | |
1159 | } | |
1160 | ||
1161 | /* we should never get here, but if we do, we're in trouble */ | |
1162 | return USB_STOR_TRANSPORT_ERROR; | |
1163 | } | |
e6e244b6 | 1164 | EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport); |
1da177e4 LT |
1165 | |
1166 | /*********************************************************************** | |
1167 | * Reset routines | |
1168 | ***********************************************************************/ | |
1169 | ||
1170 | /* This is the common part of the device reset code. | |
1171 | * | |
1172 | * It's handy that every transport mechanism uses the control endpoint for | |
1173 | * resets. | |
1174 | * | |
5203ad44 | 1175 | * Basically, we send a reset with a 5-second timeout, so we don't get |
1da177e4 LT |
1176 | * jammed attempting to do the reset. |
1177 | */ | |
1178 | static int usb_stor_reset_common(struct us_data *us, | |
1179 | u8 request, u8 requesttype, | |
1180 | u16 value, u16 index, void *data, u16 size) | |
1181 | { | |
1182 | int result; | |
1183 | int result2; | |
1da177e4 | 1184 | |
7e4d6c38 | 1185 | if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { |
4d07ef76 MD |
1186 | US_DEBUGP("No reset during disconnect\n"); |
1187 | return -EIO; | |
1188 | } | |
1da177e4 | 1189 | |
1da177e4 LT |
1190 | result = usb_stor_control_msg(us, us->send_ctrl_pipe, |
1191 | request, requesttype, value, index, data, size, | |
5203ad44 | 1192 | 5*HZ); |
1da177e4 LT |
1193 | if (result < 0) { |
1194 | US_DEBUGP("Soft reset failed: %d\n", result); | |
4d07ef76 | 1195 | return result; |
1da177e4 LT |
1196 | } |
1197 | ||
7e4d6c38 AS |
1198 | /* Give the device some time to recover from the reset, |
1199 | * but don't delay disconnect processing. */ | |
1200 | wait_event_interruptible_timeout(us->delay_wait, | |
1201 | test_bit(US_FLIDX_DISCONNECTING, &us->dflags), | |
1202 | HZ*6); | |
1203 | if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { | |
1da177e4 | 1204 | US_DEBUGP("Reset interrupted by disconnect\n"); |
4d07ef76 | 1205 | return -EIO; |
1da177e4 LT |
1206 | } |
1207 | ||
1208 | US_DEBUGP("Soft reset: clearing bulk-in endpoint halt\n"); | |
1209 | result = usb_stor_clear_halt(us, us->recv_bulk_pipe); | |
1210 | ||
1211 | US_DEBUGP("Soft reset: clearing bulk-out endpoint halt\n"); | |
1212 | result2 = usb_stor_clear_halt(us, us->send_bulk_pipe); | |
1213 | ||
5203ad44 MD |
1214 | /* return a result code based on the result of the clear-halts */ |
1215 | if (result >= 0) | |
1216 | result = result2; | |
4d07ef76 | 1217 | if (result < 0) |
1da177e4 | 1218 | US_DEBUGP("Soft reset failed\n"); |
4d07ef76 MD |
1219 | else |
1220 | US_DEBUGP("Soft reset done\n"); | |
1221 | return result; | |
1da177e4 LT |
1222 | } |
1223 | ||
1224 | /* This issues a CB[I] Reset to the device in question | |
1225 | */ | |
1226 | #define CB_RESET_CMD_SIZE 12 | |
1227 | ||
1228 | int usb_stor_CB_reset(struct us_data *us) | |
1229 | { | |
441b62c1 | 1230 | US_DEBUGP("%s called\n", __func__); |
1da177e4 LT |
1231 | |
1232 | memset(us->iobuf, 0xFF, CB_RESET_CMD_SIZE); | |
1233 | us->iobuf[0] = SEND_DIAGNOSTIC; | |
1234 | us->iobuf[1] = 4; | |
1235 | return usb_stor_reset_common(us, US_CBI_ADSC, | |
1236 | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | |
1237 | 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE); | |
1238 | } | |
e6e244b6 | 1239 | EXPORT_SYMBOL_GPL(usb_stor_CB_reset); |
1da177e4 LT |
1240 | |
1241 | /* This issues a Bulk-only Reset to the device in question, including | |
1242 | * clearing the subsequent endpoint halts that may occur. | |
1243 | */ | |
1244 | int usb_stor_Bulk_reset(struct us_data *us) | |
1245 | { | |
441b62c1 | 1246 | US_DEBUGP("%s called\n", __func__); |
1da177e4 LT |
1247 | |
1248 | return usb_stor_reset_common(us, US_BULK_RESET_REQUEST, | |
1249 | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | |
1250 | 0, us->ifnum, NULL, 0); | |
1251 | } | |
e6e244b6 | 1252 | EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset); |
4d07ef76 | 1253 | |
47104b0d AS |
1254 | /* Issue a USB port reset to the device. The caller must not hold |
1255 | * us->dev_mutex. | |
1256 | */ | |
4d07ef76 MD |
1257 | int usb_stor_port_reset(struct us_data *us) |
1258 | { | |
011b15df | 1259 | int result; |
4d07ef76 | 1260 | |
011b15df | 1261 | result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf); |
47104b0d AS |
1262 | if (result < 0) |
1263 | US_DEBUGP("unable to lock device for reset: %d\n", result); | |
1264 | else { | |
1265 | /* Were we disconnected while waiting for the lock? */ | |
7e4d6c38 | 1266 | if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { |
47104b0d AS |
1267 | result = -EIO; |
1268 | US_DEBUGP("No reset during disconnect\n"); | |
4d07ef76 | 1269 | } else { |
742120c6 ML |
1270 | result = usb_reset_device(us->pusb_dev); |
1271 | US_DEBUGP("usb_reset_device returns %d\n", | |
47104b0d | 1272 | result); |
4d07ef76 | 1273 | } |
011b15df | 1274 | usb_unlock_device(us->pusb_dev); |
4d07ef76 MD |
1275 | } |
1276 | return result; | |
1277 | } |