[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / usb / serial / ti_usb_3410_5052.h

/* vi: ts=8 sw=8
 *
 * TI 3410/5052 USB Serial Driver Header
 *
 * Copyright (C) 2004 Texas Instruments
 *
 * This driver is based on the Linux io_ti driver, which is
 *   Copyright (C) 2000-2002 Inside Out Networks
 *   Copyright (C) 2001-2002 Greg Kroah-Hartman
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * For questions or problems with this driver, contact Texas Instruments
 * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
 * Peter Berger <pberger@brimson.com>.
 */

#ifndef _TI_3410_5052_H_
#define _TI_3410_5052_H_

/* Configuration ids */
#define TI_BOOT_CONFIG			1
#define TI_ACTIVE_CONFIG		2

/* Vendor and product ids */
#define TI_VENDOR_ID			0x0451
#define IBM_VENDOR_ID			0x04b3
#define TI_3410_PRODUCT_ID		0x3410
#define IBM_4543_PRODUCT_ID		0x4543
#define IBM_454B_PRODUCT_ID		0x454b
#define IBM_454C_PRODUCT_ID		0x454c
#define TI_3410_EZ430_ID		0xF430  /* TI ez430 development tool */
#define TI_5052_BOOT_PRODUCT_ID		0x5052	/* no EEPROM, no firmware */
#define TI_5152_BOOT_PRODUCT_ID		0x5152	/* no EEPROM, no firmware */
#define TI_5052_EEPROM_PRODUCT_ID	0x505A	/* EEPROM, no firmware */
#define TI_5052_FIRMWARE_PRODUCT_ID	0x505F	/* firmware is running */
#define FRI2_PRODUCT_ID			0x5053  /* Fish River Island II */

/* Multi-Tech vendor and product ids */
#define MTS_VENDOR_ID			0x06E0
#define MTS_GSM_NO_FW_PRODUCT_ID	0xF108
#define MTS_CDMA_NO_FW_PRODUCT_ID	0xF109
#define MTS_CDMA_PRODUCT_ID		0xF110
#define MTS_GSM_PRODUCT_ID		0xF111
#define MTS_EDGE_PRODUCT_ID		0xF112
#define MTS_MT9234MU_PRODUCT_ID		0xF114
#define MTS_MT9234ZBA_PRODUCT_ID	0xF115
#define MTS_MT9234ZBAOLD_PRODUCT_ID	0x0319

/* Abbott Diabetics vendor and product ids */
#define ABBOTT_VENDOR_ID		0x1a61
#define ABBOTT_STEREO_PLUG_ID		0x3410
#define ABBOTT_PRODUCT_ID		ABBOTT_STEREO_PLUG_ID
#define ABBOTT_STRIP_PORT_ID		0x3420

/* Commands */
#define TI_GET_VERSION			0x01
#define TI_GET_PORT_STATUS		0x02
#define TI_GET_PORT_DEV_INFO		0x03
#define TI_GET_CONFIG			0x04
#define TI_SET_CONFIG			0x05
#define TI_OPEN_PORT			0x06
#define TI_CLOSE_PORT			0x07
#define TI_START_PORT			0x08
#define TI_STOP_PORT			0x09
#define TI_TEST_PORT			0x0A
#define TI_PURGE_PORT			0x0B
#define TI_RESET_EXT_DEVICE		0x0C
#define TI_WRITE_DATA			0x80
#define TI_READ_DATA			0x81
#define TI_REQ_TYPE_CLASS		0x82

/* Module identifiers */
#define TI_I2C_PORT			0x01
#define TI_IEEE1284_PORT		0x02
#define TI_UART1_PORT			0x03
#define TI_UART2_PORT			0x04
#define TI_RAM_PORT			0x05

/* Modem status */
#define TI_MSR_DELTA_CTS		0x01
#define TI_MSR_DELTA_DSR		0x02
#define TI_MSR_DELTA_RI			0x04
#define TI_MSR_DELTA_CD			0x08
#define TI_MSR_CTS			0x10
#define TI_MSR_DSR			0x20
#define TI_MSR_RI			0x40
#define TI_MSR_CD			0x80
#define TI_MSR_DELTA_MASK		0x0F
#define TI_MSR_MASK			0xF0

/* Line status */
#define TI_LSR_OVERRUN_ERROR		0x01
#define TI_LSR_PARITY_ERROR		0x02
#define TI_LSR_FRAMING_ERROR		0x04
#define TI_LSR_BREAK			0x08
#define TI_LSR_ERROR			0x0F
#define TI_LSR_RX_FULL			0x10
#define TI_LSR_TX_EMPTY			0x20

/* Line control */
#define TI_LCR_BREAK			0x40

/* Modem control */
#define TI_MCR_LOOP			0x04
#define TI_MCR_DTR			0x10
#define TI_MCR_RTS			0x20

/* Mask settings */
#define TI_UART_ENABLE_RTS_IN		0x0001
#define TI_UART_DISABLE_RTS		0x0002
#define TI_UART_ENABLE_PARITY_CHECKING	0x0008
#define TI_UART_ENABLE_DSR_OUT		0x0010
#define TI_UART_ENABLE_CTS_OUT		0x0020
#define TI_UART_ENABLE_X_OUT		0x0040
#define TI_UART_ENABLE_XA_OUT		0x0080
#define TI_UART_ENABLE_X_IN		0x0100
#define TI_UART_ENABLE_DTR_IN		0x0800
#define TI_UART_DISABLE_DTR		0x1000
#define TI_UART_ENABLE_MS_INTS		0x2000
#define TI_UART_ENABLE_AUTO_START_DMA	0x4000

/* Parity */
#define TI_UART_NO_PARITY		0x00
#define TI_UART_ODD_PARITY		0x01
#define TI_UART_EVEN_PARITY		0x02
#define TI_UART_MARK_PARITY		0x03
#define TI_UART_SPACE_PARITY		0x04

/* Stop bits */
#define TI_UART_1_STOP_BITS		0x00
#define TI_UART_1_5_STOP_BITS		0x01
#define TI_UART_2_STOP_BITS		0x02

/* Bits per character */
#define TI_UART_5_DATA_BITS		0x00
#define TI_UART_6_DATA_BITS		0x01
#define TI_UART_7_DATA_BITS		0x02
#define TI_UART_8_DATA_BITS		0x03

/* 232/485 modes */
#define TI_UART_232			0x00
#define TI_UART_485_RECEIVER_DISABLED	0x01
#define TI_UART_485_RECEIVER_ENABLED	0x02

/* Pipe transfer mode and timeout */
#define TI_PIPE_MODE_CONTINOUS		0x01
#define TI_PIPE_MODE_MASK		0x03
#define TI_PIPE_TIMEOUT_MASK		0x7C
#define TI_PIPE_TIMEOUT_ENABLE		0x80

/* Config struct */
struct ti_uart_config {
	__u16	wBaudRate;
	__u16	wFlags;
	__u8	bDataBits;
	__u8	bParity;
	__u8	bStopBits;
	char	cXon;
	char	cXoff;
	__u8	bUartMode;
} __attribute__((packed));

/* Get port status */
struct ti_port_status {
	__u8	bCmdCode;
	__u8	bModuleId;
	__u8	bErrorCode;
	__u8	bMSR;
	__u8	bLSR;
} __attribute__((packed));

/* Purge modes */
#define TI_PURGE_OUTPUT			0x00
#define TI_PURGE_INPUT			0x80

/* Read/Write data */
#define TI_RW_DATA_ADDR_SFR		0x10
#define TI_RW_DATA_ADDR_IDATA		0x20
#define TI_RW_DATA_ADDR_XDATA		0x30
#define TI_RW_DATA_ADDR_CODE		0x40
#define TI_RW_DATA_ADDR_GPIO		0x50
#define TI_RW_DATA_ADDR_I2C		0x60
#define TI_RW_DATA_ADDR_FLASH		0x70
#define TI_RW_DATA_ADDR_DSP		0x80

#define TI_RW_DATA_UNSPECIFIED		0x00
#define TI_RW_DATA_BYTE			0x01
#define TI_RW_DATA_WORD			0x02
#define TI_RW_DATA_DOUBLE_WORD		0x04

struct ti_write_data_bytes {
	__u8	bAddrType;
	__u8	bDataType;
	__u8	bDataCounter;
	__be16	wBaseAddrHi;
	__be16	wBaseAddrLo;
	__u8	bData[0];
} __attribute__((packed));

struct ti_read_data_request {
	__u8	bAddrType;
	__u8	bDataType;
	__u8	bDataCounter;
	__be16	wBaseAddrHi;
	__be16	wBaseAddrLo;
} __attribute__((packed));

struct ti_read_data_bytes {
	__u8	bCmdCode;
	__u8	bModuleId;
	__u8	bErrorCode;
	__u8	bData[0];
} __attribute__((packed));

/* Interrupt struct */
struct ti_interrupt {
	__u8	bICode;
	__u8	bIInfo;
} __attribute__((packed));

/* Interrupt codes */
#define TI_GET_PORT_FROM_CODE(c)	(((c) >> 4) - 3)
#define TI_GET_FUNC_FROM_CODE(c)	((c) & 0x0f)
#define TI_CODE_HARDWARE_ERROR		0xFF
#define TI_CODE_DATA_ERROR		0x03
#define TI_CODE_MODEM_STATUS		0x04

/* Download firmware max packet size */
#define TI_DOWNLOAD_MAX_PACKET_SIZE	64

/* Firmware image header */
struct ti_firmware_header {
	__le16	wLength;
	__u8	bCheckSum;
} __attribute__((packed));

/* UART addresses */
#define TI_UART1_BASE_ADDR		0xFFA0	/* UART 1 base address */
#define TI_UART2_BASE_ADDR		0xFFB0	/* UART 2 base address */
#define TI_UART_OFFSET_LCR		0x0002	/* UART MCR register offset */
#define TI_UART_OFFSET_MCR		0x0004	/* UART MCR register offset */

#endif /* _TI_3410_5052_H_ */
Commit	Line	Data
1da177e4 LT	1	/* vi: ts=8 sw=8
	2	*
	3	* TI 3410/5052 USB Serial Driver Header
	4	*
	5	* Copyright (C) 2004 Texas Instruments
	6	*
	7	* This driver is based on the Linux io_ti driver, which is
	8	* Copyright (C) 2000-2002 Inside Out Networks
	9	* Copyright (C) 2001-2002 Greg Kroah-Hartman
	10	*
	11	* This program is free software; you can redistribute it and/or modify
	12	* it under the terms of the GNU General Public License as published by
	13	* the Free Software Foundation; either version 2 of the License, or
	14	* (at your option) any later version.
	15	*
	16	* For questions or problems with this driver, contact Texas Instruments
	17	* technical support, or Al Borchers <alborchers@steinerpoint.com>, or
	18	* Peter Berger <pberger@brimson.com>.
	19	*/
	20
	21	#ifndef _TI_3410_5052_H_
	22	#define _TI_3410_5052_H_
	23
	24	/* Configuration ids */
	25	#define TI_BOOT_CONFIG 1
	26	#define TI_ACTIVE_CONFIG 2
	27
	28	/* Vendor and product ids */
	29	#define TI_VENDOR_ID 0x0451
1a1fab51	30	#define IBM_VENDOR_ID 0x04b3
1da177e4	31	#define TI_3410_PRODUCT_ID 0x3410
1a1fab51	32	#define IBM_4543_PRODUCT_ID 0x4543
97dcf041 ON	33	#define IBM_454B_PRODUCT_ID 0x454b
97dcf041 ON	34	#define IBM_454C_PRODUCT_ID 0x454c
1f54a6ae	35	#define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */
1da177e4 LT	36	#define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */
	37	#define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */
	38	#define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */
	39	#define TI_5052_FIRMWARE_PRODUCT_ID 0x505F /* firmware is running */
975dc33b	40	#define FRI2_PRODUCT_ID 0x5053 /* Fish River Island II */
1da177e4	41
cb7a7c6a CA	42	/* Multi-Tech vendor and product ids */
	43	#define MTS_VENDOR_ID 0x06E0
	44	#define MTS_GSM_NO_FW_PRODUCT_ID 0xF108
	45	#define MTS_CDMA_NO_FW_PRODUCT_ID 0xF109
	46	#define MTS_CDMA_PRODUCT_ID 0xF110
	47	#define MTS_GSM_PRODUCT_ID 0xF111
	48	#define MTS_EDGE_PRODUCT_ID 0xF112
cdc04834 AM	49	#define MTS_MT9234MU_PRODUCT_ID 0xF114
	50	#define MTS_MT9234ZBA_PRODUCT_ID 0xF115
	51	#define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
cb7a7c6a	52
7fd25702 AL	53	/* Abbott Diabetics vendor and product ids */
7fd25702 AL	54	#define ABBOTT_VENDOR_ID 0x1a61
35a2fbc9 AH	55	#define ABBOTT_STEREO_PLUG_ID 0x3410
	56	#define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID
	57	#define ABBOTT_STRIP_PORT_ID 0x3420
7fd25702	58
1da177e4 LT	59	/* Commands */
	60	#define TI_GET_VERSION 0x01
	61	#define TI_GET_PORT_STATUS 0x02
	62	#define TI_GET_PORT_DEV_INFO 0x03
	63	#define TI_GET_CONFIG 0x04
	64	#define TI_SET_CONFIG 0x05
	65	#define TI_OPEN_PORT 0x06
	66	#define TI_CLOSE_PORT 0x07
	67	#define TI_START_PORT 0x08
	68	#define TI_STOP_PORT 0x09
	69	#define TI_TEST_PORT 0x0A
	70	#define TI_PURGE_PORT 0x0B
	71	#define TI_RESET_EXT_DEVICE 0x0C
	72	#define TI_WRITE_DATA 0x80
	73	#define TI_READ_DATA 0x81
	74	#define TI_REQ_TYPE_CLASS 0x82
	75
	76	/* Module identifiers */
	77	#define TI_I2C_PORT 0x01
	78	#define TI_IEEE1284_PORT 0x02
	79	#define TI_UART1_PORT 0x03
	80	#define TI_UART2_PORT 0x04
	81	#define TI_RAM_PORT 0x05
	82
	83	/* Modem status */
	84	#define TI_MSR_DELTA_CTS 0x01
	85	#define TI_MSR_DELTA_DSR 0x02
	86	#define TI_MSR_DELTA_RI 0x04
	87	#define TI_MSR_DELTA_CD 0x08
	88	#define TI_MSR_CTS 0x10
	89	#define TI_MSR_DSR 0x20
	90	#define TI_MSR_RI 0x40
	91	#define TI_MSR_CD 0x80
	92	#define TI_MSR_DELTA_MASK 0x0F
	93	#define TI_MSR_MASK 0xF0
	94
	95	/* Line status */
	96	#define TI_LSR_OVERRUN_ERROR 0x01
	97	#define TI_LSR_PARITY_ERROR 0x02
	98	#define TI_LSR_FRAMING_ERROR 0x04
	99	#define TI_LSR_BREAK 0x08
	100	#define TI_LSR_ERROR 0x0F
	101	#define TI_LSR_RX_FULL 0x10
	102	#define TI_LSR_TX_EMPTY 0x20
	103
	104	/* Line control */
	105	#define TI_LCR_BREAK 0x40
	106
	107	/* Modem control */
	108	#define TI_MCR_LOOP 0x04
	109	#define TI_MCR_DTR 0x10
	110	#define TI_MCR_RTS 0x20
	111
	112	/* Mask settings */
	113	#define TI_UART_ENABLE_RTS_IN 0x0001
	114	#define TI_UART_DISABLE_RTS 0x0002
	115	#define TI_UART_ENABLE_PARITY_CHECKING 0x0008
	116	#define TI_UART_ENABLE_DSR_OUT 0x0010
	117	#define TI_UART_ENABLE_CTS_OUT 0x0020
	118	#define TI_UART_ENABLE_X_OUT 0x0040
	119	#define TI_UART_ENABLE_XA_OUT 0x0080
	120	#define TI_UART_ENABLE_X_IN 0x0100
	121	#define TI_UART_ENABLE_DTR_IN 0x0800
	122	#define TI_UART_DISABLE_DTR 0x1000
123	#define TI_UART_ENABLE_MS_INTS 0x2000
124	#define TI_UART_ENABLE_AUTO_START_DMA 0x4000
125
126	/* Parity */
127	#define TI_UART_NO_PARITY 0x00
128	#define TI_UART_ODD_PARITY 0x01
129	#define TI_UART_EVEN_PARITY 0x02
130	#define TI_UART_MARK_PARITY 0x03
131	#define TI_UART_SPACE_PARITY 0x04
132
133	/* Stop bits */
134	#define TI_UART_1_STOP_BITS 0x00
135	#define TI_UART_1_5_STOP_BITS 0x01
136	#define TI_UART_2_STOP_BITS 0x02
137
138	/* Bits per character */
139	#define TI_UART_5_DATA_BITS 0x00
140	#define TI_UART_6_DATA_BITS 0x01
141	#define TI_UART_7_DATA_BITS 0x02
142	#define TI_UART_8_DATA_BITS 0x03
143
144	/* 232/485 modes */
145	#define TI_UART_232 0x00
146	#define TI_UART_485_RECEIVER_DISABLED 0x01
147	#define TI_UART_485_RECEIVER_ENABLED 0x02
148
149	/* Pipe transfer mode and timeout */
150	#define TI_PIPE_MODE_CONTINOUS 0x01
151	#define TI_PIPE_MODE_MASK 0x03
152	#define TI_PIPE_TIMEOUT_MASK 0x7C
153	#define TI_PIPE_TIMEOUT_ENABLE 0x80
154
155	/* Config struct */
156	struct ti_uart_config {
157	__u16 wBaudRate;
158	__u16 wFlags;
159	__u8 bDataBits;
160	__u8 bParity;
161	__u8 bStopBits;
162	char cXon;
163	char cXoff;
164	__u8 bUartMode;
165	} __attribute__((packed));
166
167	/* Get port status */
168	struct ti_port_status {
169	__u8 bCmdCode;
170	__u8 bModuleId;
171	__u8 bErrorCode;
172	__u8 bMSR;
173	__u8 bLSR;
174	} __attribute__((packed));
175
176	/* Purge modes */
177	#define TI_PURGE_OUTPUT 0x00
178	#define TI_PURGE_INPUT 0x80
179
180	/* Read/Write data */
181	#define TI_RW_DATA_ADDR_SFR 0x10
182	#define TI_RW_DATA_ADDR_IDATA 0x20
183	#define TI_RW_DATA_ADDR_XDATA 0x30
184	#define TI_RW_DATA_ADDR_CODE 0x40
185	#define TI_RW_DATA_ADDR_GPIO 0x50
186	#define TI_RW_DATA_ADDR_I2C 0x60
187	#define TI_RW_DATA_ADDR_FLASH 0x70
188	#define TI_RW_DATA_ADDR_DSP 0x80
189
190	#define TI_RW_DATA_UNSPECIFIED 0x00
191	#define TI_RW_DATA_BYTE 0x01
192	#define TI_RW_DATA_WORD 0x02
193	#define TI_RW_DATA_DOUBLE_WORD 0x04
194
195	struct ti_write_data_bytes {
196	__u8 bAddrType;
197	__u8 bDataType;
198	__u8 bDataCounter;
199	__be16 wBaseAddrHi;
200	__be16 wBaseAddrLo;
201	__u8 bData[0];
202	} __attribute__((packed));
203
204	struct ti_read_data_request {
205	__u8 bAddrType;
206	__u8 bDataType;
207	__u8 bDataCounter;
208	__be16 wBaseAddrHi;
209	__be16 wBaseAddrLo;
210	} __attribute__((packed));
211
212	struct ti_read_data_bytes {
213	__u8 bCmdCode;
214	__u8 bModuleId;
215	__u8 bErrorCode;
216	__u8 bData[0];
217	} __attribute__((packed));
218
219	/* Interrupt struct */
220	struct ti_interrupt {
221	__u8 bICode;
222	__u8 bIInfo;
223	} __attribute__((packed));
224
225	/* Interrupt codes */
226	#define TI_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3)
227	#define TI_GET_FUNC_FROM_CODE(c) ((c) & 0x0f)
228	#define TI_CODE_HARDWARE_ERROR 0xFF
229	#define TI_CODE_DATA_ERROR 0x03
230	#define TI_CODE_MODEM_STATUS 0x04
231
232	/* Download firmware max packet size */
233	#define TI_DOWNLOAD_MAX_PACKET_SIZE 64
234
235	/* Firmware image header */
236	struct ti_firmware_header {
237	__le16 wLength;
238	__u8 bCheckSum;
239	} __attribute__((packed));
240
241	/* UART addresses */
242	#define TI_UART1_BASE_ADDR 0xFFA0 /* UART 1 base address */
243	#define TI_UART2_BASE_ADDR 0xFFB0 /* UART 2 base address */
244	#define TI_UART_OFFSET_LCR 0x0002 /* UART MCR register offset */
245	#define TI_UART_OFFSET_MCR 0x0004 /* UART MCR register offset */
246
247	#endif /* _TI_3410_5052_H_ */