Commit | Line | Data |
---|---|---|
3f542974 PS |
1 | /* |
2 | * This program is free software; you can redistribute it and/or modify | |
3 | * it under the terms of the GNU General Public License as published by | |
4 | * the Free Software Foundation; either version 2 of the License, or | |
5 | * (at your option) any later version. | |
6 | * | |
7 | * This program is distributed in the hope that it will be useful, | |
8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
10 | * GNU General Public License for more details. | |
11 | * | |
12 | * You should have received a copy of the GNU General Public License | |
13 | * along with this program; if not, write to the Free Software | |
14 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
15 | * | |
16 | * Clean ups from Moschip version and a few ioctl implementations by: | |
17 | * Paul B Schroeder <pschroeder "at" uplogix "dot" com> | |
18 | * | |
19 | * Originally based on drivers/usb/serial/io_edgeport.c which is: | |
20 | * Copyright (C) 2000 Inside Out Networks, All rights reserved. | |
21 | * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> | |
22 | * | |
23 | */ | |
24 | ||
25 | #include <linux/kernel.h> | |
26 | #include <linux/errno.h> | |
27 | #include <linux/init.h> | |
28 | #include <linux/slab.h> | |
29 | #include <linux/tty.h> | |
30 | #include <linux/tty_driver.h> | |
31 | #include <linux/tty_flip.h> | |
32 | #include <linux/module.h> | |
33 | #include <linux/serial.h> | |
34 | #include <linux/usb.h> | |
35 | #include <linux/usb/serial.h> | |
880af9db | 36 | #include <linux/uaccess.h> |
3f542974 PS |
37 | |
38 | /* | |
39 | * Version Information | |
40 | */ | |
37768adf | 41 | #define DRIVER_VERSION "1.3.2" |
3f542974 PS |
42 | #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver" |
43 | ||
44 | /* | |
45 | * 16C50 UART register defines | |
46 | */ | |
47 | ||
48 | #define LCR_BITS_5 0x00 /* 5 bits/char */ | |
49 | #define LCR_BITS_6 0x01 /* 6 bits/char */ | |
50 | #define LCR_BITS_7 0x02 /* 7 bits/char */ | |
51 | #define LCR_BITS_8 0x03 /* 8 bits/char */ | |
52 | #define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ | |
53 | ||
54 | #define LCR_STOP_1 0x00 /* 1 stop bit */ | |
55 | #define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */ | |
56 | #define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */ | |
57 | #define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ | |
58 | ||
59 | #define LCR_PAR_NONE 0x00 /* No parity */ | |
60 | #define LCR_PAR_ODD 0x08 /* Odd parity */ | |
61 | #define LCR_PAR_EVEN 0x18 /* Even parity */ | |
62 | #define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */ | |
63 | #define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */ | |
64 | #define LCR_PAR_MASK 0x38 /* Mask for parity field */ | |
65 | ||
66 | #define LCR_SET_BREAK 0x40 /* Set Break condition */ | |
67 | #define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */ | |
68 | ||
69 | #define MCR_DTR 0x01 /* Assert DTR */ | |
70 | #define MCR_RTS 0x02 /* Assert RTS */ | |
71 | #define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */ | |
72 | #define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */ | |
73 | #define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */ | |
74 | #define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */ | |
75 | ||
76 | #define MOS7840_MSR_CTS 0x10 /* Current state of CTS */ | |
77 | #define MOS7840_MSR_DSR 0x20 /* Current state of DSR */ | |
78 | #define MOS7840_MSR_RI 0x40 /* Current state of RI */ | |
79 | #define MOS7840_MSR_CD 0x80 /* Current state of CD */ | |
80 | ||
81 | /* | |
82 | * Defines used for sending commands to port | |
83 | */ | |
84 | ||
880af9db AC |
85 | #define WAIT_FOR_EVER (HZ * 0) /* timeout urb is wait for ever */ |
86 | #define MOS_WDR_TIMEOUT (HZ * 5) /* default urb timeout */ | |
3f542974 PS |
87 | |
88 | #define MOS_PORT1 0x0200 | |
89 | #define MOS_PORT2 0x0300 | |
90 | #define MOS_VENREG 0x0000 | |
91 | #define MOS_MAX_PORT 0x02 | |
92 | #define MOS_WRITE 0x0E | |
93 | #define MOS_READ 0x0D | |
94 | ||
95 | /* Requests */ | |
96 | #define MCS_RD_RTYPE 0xC0 | |
97 | #define MCS_WR_RTYPE 0x40 | |
98 | #define MCS_RDREQ 0x0D | |
99 | #define MCS_WRREQ 0x0E | |
100 | #define MCS_CTRL_TIMEOUT 500 | |
101 | #define VENDOR_READ_LENGTH (0x01) | |
102 | ||
103 | #define MAX_NAME_LEN 64 | |
104 | ||
880af9db AC |
105 | #define ZLP_REG1 0x3A /* Zero_Flag_Reg1 58 */ |
106 | #define ZLP_REG5 0x3E /* Zero_Flag_Reg5 62 */ | |
3f542974 PS |
107 | |
108 | /* For higher baud Rates use TIOCEXBAUD */ | |
109 | #define TIOCEXBAUD 0x5462 | |
110 | ||
111 | /* vendor id and device id defines */ | |
112 | ||
11e1abb4 | 113 | /* The native mos7840/7820 component */ |
3f542974 PS |
114 | #define USB_VENDOR_ID_MOSCHIP 0x9710 |
115 | #define MOSCHIP_DEVICE_ID_7840 0x7840 | |
116 | #define MOSCHIP_DEVICE_ID_7820 0x7820 | |
11e1abb4 DL |
117 | /* The native component can have its vendor/device id's overridden |
118 | * in vendor-specific implementations. Such devices can be handled | |
119 | * by making a change here, in moschip_port_id_table, and in | |
120 | * moschip_id_table_combined | |
121 | */ | |
122 | #define USB_VENDOR_ID_BANDB 0x0856 | |
123 | #define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 | |
124 | #define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 | |
3f542974 | 125 | |
e9b8cffa TC |
126 | /* This driver also supports the ATEN UC2324 device since it is mos7840 based |
127 | * - if I knew the device id it would also support the ATEN UC2322 */ | |
128 | #define USB_VENDOR_ID_ATENINTL 0x0557 | |
129 | #define ATENINTL_DEVICE_ID_UC2324 0x2011 | |
130 | ||
11e1abb4 | 131 | /* Interrupt Routine Defines */ |
3f542974 PS |
132 | |
133 | #define SERIAL_IIR_RLS 0x06 | |
134 | #define SERIAL_IIR_MS 0x00 | |
135 | ||
136 | /* | |
137 | * Emulation of the bit mask on the LINE STATUS REGISTER. | |
138 | */ | |
139 | #define SERIAL_LSR_DR 0x0001 | |
140 | #define SERIAL_LSR_OE 0x0002 | |
141 | #define SERIAL_LSR_PE 0x0004 | |
142 | #define SERIAL_LSR_FE 0x0008 | |
143 | #define SERIAL_LSR_BI 0x0010 | |
144 | ||
145 | #define MOS_MSR_DELTA_CTS 0x10 | |
146 | #define MOS_MSR_DELTA_DSR 0x20 | |
147 | #define MOS_MSR_DELTA_RI 0x40 | |
148 | #define MOS_MSR_DELTA_CD 0x80 | |
149 | ||
880af9db | 150 | /* Serial Port register Address */ |
3f542974 PS |
151 | #define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01)) |
152 | #define FIFO_CONTROL_REGISTER ((__u16)(0x02)) | |
153 | #define LINE_CONTROL_REGISTER ((__u16)(0x03)) | |
154 | #define MODEM_CONTROL_REGISTER ((__u16)(0x04)) | |
155 | #define LINE_STATUS_REGISTER ((__u16)(0x05)) | |
156 | #define MODEM_STATUS_REGISTER ((__u16)(0x06)) | |
157 | #define SCRATCH_PAD_REGISTER ((__u16)(0x07)) | |
158 | #define DIVISOR_LATCH_LSB ((__u16)(0x00)) | |
159 | #define DIVISOR_LATCH_MSB ((__u16)(0x01)) | |
160 | ||
161 | #define CLK_MULTI_REGISTER ((__u16)(0x02)) | |
162 | #define CLK_START_VALUE_REGISTER ((__u16)(0x03)) | |
163 | ||
164 | #define SERIAL_LCR_DLAB ((__u16)(0x0080)) | |
165 | ||
166 | /* | |
167 | * URB POOL related defines | |
168 | */ | |
169 | #define NUM_URBS 16 /* URB Count */ | |
170 | #define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ | |
171 | ||
172 | ||
173 | static struct usb_device_id moschip_port_id_table[] = { | |
174 | {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, | |
175 | {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, | |
11e1abb4 DL |
176 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, |
177 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, | |
e9b8cffa | 178 | {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, |
3f542974 PS |
179 | {} /* terminating entry */ |
180 | }; | |
181 | ||
182 | static __devinitdata struct usb_device_id moschip_id_table_combined[] = { | |
183 | {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, | |
184 | {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, | |
11e1abb4 DL |
185 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, |
186 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, | |
e9b8cffa | 187 | {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, |
3f542974 PS |
188 | {} /* terminating entry */ |
189 | }; | |
190 | ||
191 | MODULE_DEVICE_TABLE(usb, moschip_id_table_combined); | |
192 | ||
193 | /* This structure holds all of the local port information */ | |
194 | ||
195 | struct moschip_port { | |
196 | int port_num; /*Actual port number in the device(1,2,etc) */ | |
197 | struct urb *write_urb; /* write URB for this port */ | |
198 | struct urb *read_urb; /* read URB for this port */ | |
0de9a702 | 199 | struct urb *int_urb; |
3f542974 PS |
200 | __u8 shadowLCR; /* last LCR value received */ |
201 | __u8 shadowMCR; /* last MCR value received */ | |
202 | char open; | |
0de9a702 ON |
203 | char open_ports; |
204 | char zombie; | |
3f542974 PS |
205 | wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ |
206 | wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */ | |
207 | int delta_msr_cond; | |
208 | struct async_icount icount; | |
209 | struct usb_serial_port *port; /* loop back to the owner of this object */ | |
210 | ||
880af9db | 211 | /* Offsets */ |
3f542974 PS |
212 | __u8 SpRegOffset; |
213 | __u8 ControlRegOffset; | |
214 | __u8 DcrRegOffset; | |
880af9db | 215 | /* for processing control URBS in interrupt context */ |
3f542974 | 216 | struct urb *control_urb; |
0de9a702 | 217 | struct usb_ctrlrequest *dr; |
3f542974 PS |
218 | char *ctrl_buf; |
219 | int MsrLsr; | |
220 | ||
0de9a702 | 221 | spinlock_t pool_lock; |
3f542974 | 222 | struct urb *write_urb_pool[NUM_URBS]; |
0de9a702 | 223 | char busy[NUM_URBS]; |
50de36f7 | 224 | bool read_urb_busy; |
3f542974 PS |
225 | }; |
226 | ||
227 | ||
228 | static int debug; | |
3f542974 PS |
229 | |
230 | /* | |
231 | * mos7840_set_reg_sync | |
232 | * To set the Control register by calling usb_fill_control_urb function | |
233 | * by passing usb_sndctrlpipe function as parameter. | |
234 | */ | |
235 | ||
236 | static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg, | |
237 | __u16 val) | |
238 | { | |
239 | struct usb_device *dev = port->serial->dev; | |
240 | val = val & 0x00ff; | |
241 | dbg("mos7840_set_reg_sync offset is %x, value %x\n", reg, val); | |
242 | ||
243 | return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, | |
244 | MCS_WR_RTYPE, val, reg, NULL, 0, | |
245 | MOS_WDR_TIMEOUT); | |
246 | } | |
247 | ||
248 | /* | |
249 | * mos7840_get_reg_sync | |
250 | * To set the Uart register by calling usb_fill_control_urb function by | |
251 | * passing usb_rcvctrlpipe function as parameter. | |
252 | */ | |
253 | ||
254 | static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, | |
880af9db | 255 | __u16 *val) |
3f542974 PS |
256 | { |
257 | struct usb_device *dev = port->serial->dev; | |
258 | int ret = 0; | |
259 | ||
260 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, | |
261 | MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH, | |
262 | MOS_WDR_TIMEOUT); | |
263 | dbg("mos7840_get_reg_sync offset is %x, return val %x\n", reg, *val); | |
264 | *val = (*val) & 0x00ff; | |
265 | return ret; | |
266 | } | |
267 | ||
268 | /* | |
269 | * mos7840_set_uart_reg | |
270 | * To set the Uart register by calling usb_fill_control_urb function by | |
271 | * passing usb_sndctrlpipe function as parameter. | |
272 | */ | |
273 | ||
274 | static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, | |
275 | __u16 val) | |
276 | { | |
277 | ||
278 | struct usb_device *dev = port->serial->dev; | |
279 | val = val & 0x00ff; | |
880af9db AC |
280 | /* For the UART control registers, the application number need |
281 | to be Or'ed */ | |
0de9a702 | 282 | if (port->serial->num_ports == 4) { |
880af9db AC |
283 | val |= (((__u16) port->number - |
284 | (__u16) (port->serial->minor)) + 1) << 8; | |
3f542974 PS |
285 | dbg("mos7840_set_uart_reg application number is %x\n", val); |
286 | } else { | |
287 | if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { | |
880af9db | 288 | val |= (((__u16) port->number - |
3f542974 PS |
289 | (__u16) (port->serial->minor)) + 1) << 8; |
290 | dbg("mos7840_set_uart_reg application number is %x\n", | |
291 | val); | |
292 | } else { | |
293 | val |= | |
294 | (((__u16) port->number - | |
295 | (__u16) (port->serial->minor)) + 2) << 8; | |
296 | dbg("mos7840_set_uart_reg application number is %x\n", | |
297 | val); | |
298 | } | |
299 | } | |
300 | return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, | |
301 | MCS_WR_RTYPE, val, reg, NULL, 0, | |
302 | MOS_WDR_TIMEOUT); | |
303 | ||
304 | } | |
305 | ||
306 | /* | |
307 | * mos7840_get_uart_reg | |
308 | * To set the Control register by calling usb_fill_control_urb function | |
309 | * by passing usb_rcvctrlpipe function as parameter. | |
310 | */ | |
311 | static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, | |
880af9db | 312 | __u16 *val) |
3f542974 PS |
313 | { |
314 | struct usb_device *dev = port->serial->dev; | |
315 | int ret = 0; | |
316 | __u16 Wval; | |
317 | ||
880af9db AC |
318 | /* dbg("application number is %4x \n", |
319 | (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */ | |
320 | /* Wval is same as application number */ | |
0de9a702 | 321 | if (port->serial->num_ports == 4) { |
3f542974 PS |
322 | Wval = |
323 | (((__u16) port->number - (__u16) (port->serial->minor)) + | |
324 | 1) << 8; | |
325 | dbg("mos7840_get_uart_reg application number is %x\n", Wval); | |
326 | } else { | |
327 | if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { | |
880af9db | 328 | Wval = (((__u16) port->number - |
3f542974 PS |
329 | (__u16) (port->serial->minor)) + 1) << 8; |
330 | dbg("mos7840_get_uart_reg application number is %x\n", | |
331 | Wval); | |
332 | } else { | |
880af9db | 333 | Wval = (((__u16) port->number - |
3f542974 PS |
334 | (__u16) (port->serial->minor)) + 2) << 8; |
335 | dbg("mos7840_get_uart_reg application number is %x\n", | |
336 | Wval); | |
337 | } | |
338 | } | |
339 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, | |
340 | MCS_RD_RTYPE, Wval, reg, val, VENDOR_READ_LENGTH, | |
341 | MOS_WDR_TIMEOUT); | |
342 | *val = (*val) & 0x00ff; | |
343 | return ret; | |
344 | } | |
345 | ||
346 | static void mos7840_dump_serial_port(struct moschip_port *mos7840_port) | |
347 | { | |
348 | ||
349 | dbg("***************************************\n"); | |
350 | dbg("SpRegOffset is %2x\n", mos7840_port->SpRegOffset); | |
351 | dbg("ControlRegOffset is %2x \n", mos7840_port->ControlRegOffset); | |
352 | dbg("DCRRegOffset is %2x \n", mos7840_port->DcrRegOffset); | |
353 | dbg("***************************************\n"); | |
354 | ||
355 | } | |
356 | ||
357 | /************************************************************************/ | |
358 | /************************************************************************/ | |
359 | /* I N T E R F A C E F U N C T I O N S */ | |
360 | /* I N T E R F A C E F U N C T I O N S */ | |
361 | /************************************************************************/ | |
362 | /************************************************************************/ | |
363 | ||
364 | static inline void mos7840_set_port_private(struct usb_serial_port *port, | |
365 | struct moschip_port *data) | |
366 | { | |
367 | usb_set_serial_port_data(port, (void *)data); | |
368 | } | |
369 | ||
370 | static inline struct moschip_port *mos7840_get_port_private(struct | |
371 | usb_serial_port | |
372 | *port) | |
373 | { | |
374 | return (struct moschip_port *)usb_get_serial_port_data(port); | |
375 | } | |
376 | ||
0de9a702 | 377 | static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) |
3f542974 PS |
378 | { |
379 | struct moschip_port *mos7840_port; | |
380 | struct async_icount *icount; | |
381 | mos7840_port = port; | |
382 | icount = &mos7840_port->icount; | |
383 | if (new_msr & | |
384 | (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI | | |
385 | MOS_MSR_DELTA_CD)) { | |
386 | icount = &mos7840_port->icount; | |
387 | ||
388 | /* update input line counters */ | |
389 | if (new_msr & MOS_MSR_DELTA_CTS) { | |
390 | icount->cts++; | |
0de9a702 | 391 | smp_wmb(); |
3f542974 PS |
392 | } |
393 | if (new_msr & MOS_MSR_DELTA_DSR) { | |
394 | icount->dsr++; | |
0de9a702 | 395 | smp_wmb(); |
3f542974 PS |
396 | } |
397 | if (new_msr & MOS_MSR_DELTA_CD) { | |
398 | icount->dcd++; | |
0de9a702 | 399 | smp_wmb(); |
3f542974 PS |
400 | } |
401 | if (new_msr & MOS_MSR_DELTA_RI) { | |
402 | icount->rng++; | |
0de9a702 | 403 | smp_wmb(); |
3f542974 PS |
404 | } |
405 | } | |
3f542974 PS |
406 | } |
407 | ||
0de9a702 | 408 | static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) |
3f542974 PS |
409 | { |
410 | struct async_icount *icount; | |
411 | ||
441b62c1 | 412 | dbg("%s - %02x", __func__, new_lsr); |
3f542974 PS |
413 | |
414 | if (new_lsr & SERIAL_LSR_BI) { | |
880af9db AC |
415 | /* |
416 | * Parity and Framing errors only count if they | |
417 | * occur exclusive of a break being | |
418 | * received. | |
419 | */ | |
3f542974 PS |
420 | new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI); |
421 | } | |
422 | ||
423 | /* update input line counters */ | |
424 | icount = &port->icount; | |
425 | if (new_lsr & SERIAL_LSR_BI) { | |
426 | icount->brk++; | |
0de9a702 | 427 | smp_wmb(); |
3f542974 PS |
428 | } |
429 | if (new_lsr & SERIAL_LSR_OE) { | |
430 | icount->overrun++; | |
0de9a702 | 431 | smp_wmb(); |
3f542974 PS |
432 | } |
433 | if (new_lsr & SERIAL_LSR_PE) { | |
434 | icount->parity++; | |
0de9a702 | 435 | smp_wmb(); |
3f542974 PS |
436 | } |
437 | if (new_lsr & SERIAL_LSR_FE) { | |
438 | icount->frame++; | |
0de9a702 | 439 | smp_wmb(); |
3f542974 | 440 | } |
3f542974 PS |
441 | } |
442 | ||
443 | /************************************************************************/ | |
444 | /************************************************************************/ | |
445 | /* U S B C A L L B A C K F U N C T I O N S */ | |
446 | /* U S B C A L L B A C K F U N C T I O N S */ | |
447 | /************************************************************************/ | |
448 | /************************************************************************/ | |
449 | ||
7d12e780 | 450 | static void mos7840_control_callback(struct urb *urb) |
3f542974 PS |
451 | { |
452 | unsigned char *data; | |
453 | struct moschip_port *mos7840_port; | |
454 | __u8 regval = 0x0; | |
0de9a702 | 455 | int result = 0; |
0643c724 | 456 | int status = urb->status; |
3f542974 | 457 | |
cdc97792 | 458 | mos7840_port = urb->context; |
0de9a702 | 459 | |
0643c724 | 460 | switch (status) { |
3f542974 PS |
461 | case 0: |
462 | /* success */ | |
463 | break; | |
464 | case -ECONNRESET: | |
465 | case -ENOENT: | |
466 | case -ESHUTDOWN: | |
467 | /* this urb is terminated, clean up */ | |
441b62c1 | 468 | dbg("%s - urb shutting down with status: %d", __func__, |
0643c724 | 469 | status); |
3f542974 PS |
470 | return; |
471 | default: | |
441b62c1 | 472 | dbg("%s - nonzero urb status received: %d", __func__, |
0643c724 | 473 | status); |
3f542974 PS |
474 | goto exit; |
475 | } | |
476 | ||
441b62c1 HH |
477 | dbg("%s urb buffer size is %d\n", __func__, urb->actual_length); |
478 | dbg("%s mos7840_port->MsrLsr is %d port %d\n", __func__, | |
3f542974 PS |
479 | mos7840_port->MsrLsr, mos7840_port->port_num); |
480 | data = urb->transfer_buffer; | |
481 | regval = (__u8) data[0]; | |
441b62c1 | 482 | dbg("%s data is %x\n", __func__, regval); |
3f542974 PS |
483 | if (mos7840_port->MsrLsr == 0) |
484 | mos7840_handle_new_msr(mos7840_port, regval); | |
485 | else if (mos7840_port->MsrLsr == 1) | |
486 | mos7840_handle_new_lsr(mos7840_port, regval); | |
487 | ||
0de9a702 ON |
488 | exit: |
489 | spin_lock(&mos7840_port->pool_lock); | |
490 | if (!mos7840_port->zombie) | |
491 | result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC); | |
492 | spin_unlock(&mos7840_port->pool_lock); | |
493 | if (result) { | |
494 | dev_err(&urb->dev->dev, | |
495 | "%s - Error %d submitting interrupt urb\n", | |
441b62c1 | 496 | __func__, result); |
0de9a702 | 497 | } |
3f542974 PS |
498 | } |
499 | ||
500 | static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, | |
880af9db | 501 | __u16 *val) |
3f542974 PS |
502 | { |
503 | struct usb_device *dev = mcs->port->serial->dev; | |
0de9a702 ON |
504 | struct usb_ctrlrequest *dr = mcs->dr; |
505 | unsigned char *buffer = mcs->ctrl_buf; | |
506 | int ret; | |
3f542974 | 507 | |
3f542974 PS |
508 | dr->bRequestType = MCS_RD_RTYPE; |
509 | dr->bRequest = MCS_RDREQ; | |
880af9db | 510 | dr->wValue = cpu_to_le16(Wval); /* 0 */ |
3f542974 PS |
511 | dr->wIndex = cpu_to_le16(reg); |
512 | dr->wLength = cpu_to_le16(2); | |
513 | ||
514 | usb_fill_control_urb(mcs->control_urb, dev, usb_rcvctrlpipe(dev, 0), | |
515 | (unsigned char *)dr, buffer, 2, | |
516 | mos7840_control_callback, mcs); | |
517 | mcs->control_urb->transfer_buffer_length = 2; | |
518 | ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC); | |
519 | return ret; | |
520 | } | |
521 | ||
522 | /***************************************************************************** | |
523 | * mos7840_interrupt_callback | |
524 | * this is the callback function for when we have received data on the | |
525 | * interrupt endpoint. | |
526 | *****************************************************************************/ | |
527 | ||
7d12e780 | 528 | static void mos7840_interrupt_callback(struct urb *urb) |
3f542974 PS |
529 | { |
530 | int result; | |
531 | int length; | |
532 | struct moschip_port *mos7840_port; | |
533 | struct usb_serial *serial; | |
534 | __u16 Data; | |
535 | unsigned char *data; | |
536 | __u8 sp[5], st; | |
0de9a702 ON |
537 | int i, rv = 0; |
538 | __u16 wval, wreg = 0; | |
0643c724 | 539 | int status = urb->status; |
3f542974 PS |
540 | |
541 | dbg("%s", " : Entering\n"); | |
3f542974 | 542 | |
0643c724 | 543 | switch (status) { |
3f542974 PS |
544 | case 0: |
545 | /* success */ | |
546 | break; | |
547 | case -ECONNRESET: | |
548 | case -ENOENT: | |
549 | case -ESHUTDOWN: | |
550 | /* this urb is terminated, clean up */ | |
441b62c1 | 551 | dbg("%s - urb shutting down with status: %d", __func__, |
0643c724 | 552 | status); |
3f542974 PS |
553 | return; |
554 | default: | |
441b62c1 | 555 | dbg("%s - nonzero urb status received: %d", __func__, |
0643c724 | 556 | status); |
3f542974 PS |
557 | goto exit; |
558 | } | |
559 | ||
560 | length = urb->actual_length; | |
561 | data = urb->transfer_buffer; | |
562 | ||
cdc97792 | 563 | serial = urb->context; |
3f542974 PS |
564 | |
565 | /* Moschip get 5 bytes | |
566 | * Byte 1 IIR Port 1 (port.number is 0) | |
567 | * Byte 2 IIR Port 2 (port.number is 1) | |
568 | * Byte 3 IIR Port 3 (port.number is 2) | |
569 | * Byte 4 IIR Port 4 (port.number is 3) | |
570 | * Byte 5 FIFO status for both */ | |
571 | ||
572 | if (length && length > 5) { | |
573 | dbg("%s \n", "Wrong data !!!"); | |
574 | return; | |
575 | } | |
576 | ||
577 | sp[0] = (__u8) data[0]; | |
578 | sp[1] = (__u8) data[1]; | |
579 | sp[2] = (__u8) data[2]; | |
580 | sp[3] = (__u8) data[3]; | |
581 | st = (__u8) data[4]; | |
582 | ||
583 | for (i = 0; i < serial->num_ports; i++) { | |
584 | mos7840_port = mos7840_get_port_private(serial->port[i]); | |
585 | wval = | |
586 | (((__u16) serial->port[i]->number - | |
587 | (__u16) (serial->minor)) + 1) << 8; | |
588 | if (mos7840_port->open) { | |
589 | if (sp[i] & 0x01) { | |
590 | dbg("SP%d No Interrupt !!!\n", i); | |
591 | } else { | |
592 | switch (sp[i] & 0x0f) { | |
593 | case SERIAL_IIR_RLS: | |
594 | dbg("Serial Port %d: Receiver status error or ", i); | |
595 | dbg("address bit detected in 9-bit mode\n"); | |
596 | mos7840_port->MsrLsr = 1; | |
0de9a702 | 597 | wreg = LINE_STATUS_REGISTER; |
3f542974 PS |
598 | break; |
599 | case SERIAL_IIR_MS: | |
600 | dbg("Serial Port %d: Modem status change\n", i); | |
601 | mos7840_port->MsrLsr = 0; | |
0de9a702 | 602 | wreg = MODEM_STATUS_REGISTER; |
3f542974 PS |
603 | break; |
604 | } | |
0de9a702 ON |
605 | spin_lock(&mos7840_port->pool_lock); |
606 | if (!mos7840_port->zombie) { | |
607 | rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); | |
608 | } else { | |
609 | spin_unlock(&mos7840_port->pool_lock); | |
610 | return; | |
611 | } | |
612 | spin_unlock(&mos7840_port->pool_lock); | |
3f542974 PS |
613 | } |
614 | } | |
615 | } | |
880af9db AC |
616 | if (!(rv < 0)) |
617 | /* the completion handler for the control urb will resubmit */ | |
0de9a702 ON |
618 | return; |
619 | exit: | |
3f542974 PS |
620 | result = usb_submit_urb(urb, GFP_ATOMIC); |
621 | if (result) { | |
622 | dev_err(&urb->dev->dev, | |
623 | "%s - Error %d submitting interrupt urb\n", | |
441b62c1 | 624 | __func__, result); |
3f542974 | 625 | } |
3f542974 PS |
626 | } |
627 | ||
628 | static int mos7840_port_paranoia_check(struct usb_serial_port *port, | |
629 | const char *function) | |
630 | { | |
631 | if (!port) { | |
632 | dbg("%s - port == NULL", function); | |
633 | return -1; | |
634 | } | |
635 | if (!port->serial) { | |
636 | dbg("%s - port->serial == NULL", function); | |
637 | return -1; | |
638 | } | |
639 | ||
640 | return 0; | |
641 | } | |
642 | ||
643 | /* Inline functions to check the sanity of a pointer that is passed to us */ | |
644 | static int mos7840_serial_paranoia_check(struct usb_serial *serial, | |
645 | const char *function) | |
646 | { | |
647 | if (!serial) { | |
648 | dbg("%s - serial == NULL", function); | |
649 | return -1; | |
650 | } | |
651 | if (!serial->type) { | |
652 | dbg("%s - serial->type == NULL!", function); | |
653 | return -1; | |
654 | } | |
655 | ||
656 | return 0; | |
657 | } | |
658 | ||
659 | static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port, | |
660 | const char *function) | |
661 | { | |
662 | /* if no port was specified, or it fails a paranoia check */ | |
663 | if (!port || | |
664 | mos7840_port_paranoia_check(port, function) || | |
665 | mos7840_serial_paranoia_check(port->serial, function)) { | |
880af9db AC |
666 | /* then say that we don't have a valid usb_serial thing, |
667 | * which will end up genrating -ENODEV return values */ | |
3f542974 PS |
668 | return NULL; |
669 | } | |
670 | ||
671 | return port->serial; | |
672 | } | |
673 | ||
674 | /***************************************************************************** | |
675 | * mos7840_bulk_in_callback | |
676 | * this is the callback function for when we have received data on the | |
677 | * bulk in endpoint. | |
678 | *****************************************************************************/ | |
679 | ||
7d12e780 | 680 | static void mos7840_bulk_in_callback(struct urb *urb) |
3f542974 | 681 | { |
0643c724 | 682 | int retval; |
3f542974 PS |
683 | unsigned char *data; |
684 | struct usb_serial *serial; | |
685 | struct usb_serial_port *port; | |
686 | struct moschip_port *mos7840_port; | |
687 | struct tty_struct *tty; | |
0643c724 | 688 | int status = urb->status; |
3f542974 | 689 | |
cdc97792 | 690 | mos7840_port = urb->context; |
3f542974 PS |
691 | if (!mos7840_port) { |
692 | dbg("%s", "NULL mos7840_port pointer \n"); | |
50de36f7 GKH |
693 | mos7840_port->read_urb_busy = false; |
694 | return; | |
695 | } | |
696 | ||
697 | if (status) { | |
698 | dbg("nonzero read bulk status received: %d", status); | |
699 | mos7840_port->read_urb_busy = false; | |
3f542974 PS |
700 | return; |
701 | } | |
702 | ||
703 | port = (struct usb_serial_port *)mos7840_port->port; | |
441b62c1 | 704 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 | 705 | dbg("%s", "Port Paranoia failed \n"); |
50de36f7 | 706 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
707 | return; |
708 | } | |
709 | ||
441b62c1 | 710 | serial = mos7840_get_usb_serial(port, __func__); |
3f542974 PS |
711 | if (!serial) { |
712 | dbg("%s\n", "Bad serial pointer "); | |
50de36f7 | 713 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
714 | return; |
715 | } | |
716 | ||
717 | dbg("%s\n", "Entering... \n"); | |
718 | ||
719 | data = urb->transfer_buffer; | |
720 | ||
721 | dbg("%s", "Entering ........... \n"); | |
722 | ||
723 | if (urb->actual_length) { | |
4a90f09b | 724 | tty = tty_port_tty_get(&mos7840_port->port->port); |
3f542974 PS |
725 | if (tty) { |
726 | tty_buffer_request_room(tty, urb->actual_length); | |
727 | tty_insert_flip_string(tty, data, urb->actual_length); | |
728 | dbg(" %s \n", data); | |
729 | tty_flip_buffer_push(tty); | |
4a90f09b | 730 | tty_kref_put(tty); |
3f542974 PS |
731 | } |
732 | mos7840_port->icount.rx += urb->actual_length; | |
0de9a702 | 733 | smp_wmb(); |
3f542974 PS |
734 | dbg("mos7840_port->icount.rx is %d:\n", |
735 | mos7840_port->icount.rx); | |
736 | } | |
737 | ||
738 | if (!mos7840_port->read_urb) { | |
739 | dbg("%s", "URB KILLED !!!\n"); | |
50de36f7 | 740 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
741 | return; |
742 | } | |
743 | ||
3f542974 | 744 | |
0de9a702 | 745 | mos7840_port->read_urb->dev = serial->dev; |
3f542974 | 746 | |
50de36f7 | 747 | mos7840_port->read_urb_busy = true; |
0643c724 | 748 | retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); |
0de9a702 | 749 | |
0643c724 | 750 | if (retval) { |
50de36f7 GKH |
751 | dbg("usb_submit_urb(read bulk) failed, retval = %d", retval); |
752 | mos7840_port->read_urb_busy = false; | |
3f542974 PS |
753 | } |
754 | } | |
755 | ||
756 | /***************************************************************************** | |
757 | * mos7840_bulk_out_data_callback | |
880af9db AC |
758 | * this is the callback function for when we have finished sending |
759 | * serial data on the bulk out endpoint. | |
3f542974 PS |
760 | *****************************************************************************/ |
761 | ||
7d12e780 | 762 | static void mos7840_bulk_out_data_callback(struct urb *urb) |
3f542974 PS |
763 | { |
764 | struct moschip_port *mos7840_port; | |
765 | struct tty_struct *tty; | |
0643c724 | 766 | int status = urb->status; |
0de9a702 ON |
767 | int i; |
768 | ||
cdc97792 | 769 | mos7840_port = urb->context; |
0de9a702 ON |
770 | spin_lock(&mos7840_port->pool_lock); |
771 | for (i = 0; i < NUM_URBS; i++) { | |
772 | if (urb == mos7840_port->write_urb_pool[i]) { | |
773 | mos7840_port->busy[i] = 0; | |
774 | break; | |
775 | } | |
776 | } | |
777 | spin_unlock(&mos7840_port->pool_lock); | |
778 | ||
0643c724 GKH |
779 | if (status) { |
780 | dbg("nonzero write bulk status received:%d\n", status); | |
3f542974 PS |
781 | return; |
782 | } | |
783 | ||
441b62c1 | 784 | if (mos7840_port_paranoia_check(mos7840_port->port, __func__)) { |
3f542974 PS |
785 | dbg("%s", "Port Paranoia failed \n"); |
786 | return; | |
787 | } | |
788 | ||
789 | dbg("%s \n", "Entering ........."); | |
790 | ||
4a90f09b | 791 | tty = tty_port_tty_get(&mos7840_port->port->port); |
b963a844 JS |
792 | if (tty && mos7840_port->open) |
793 | tty_wakeup(tty); | |
4a90f09b | 794 | tty_kref_put(tty); |
3f542974 PS |
795 | |
796 | } | |
797 | ||
798 | /************************************************************************/ | |
799 | /* D R I V E R T T Y I N T E R F A C E F U N C T I O N S */ | |
800 | /************************************************************************/ | |
801 | #ifdef MCSSerialProbe | |
802 | static int mos7840_serial_probe(struct usb_serial *serial, | |
803 | const struct usb_device_id *id) | |
804 | { | |
805 | ||
806 | /*need to implement the mode_reg reading and updating\ | |
807 | structures usb_serial_ device_type\ | |
808 | (i.e num_ports, num_bulkin,bulkout etc) */ | |
809 | /* Also we can update the changes attach */ | |
810 | return 1; | |
811 | } | |
812 | #endif | |
813 | ||
814 | /***************************************************************************** | |
815 | * mos7840_open | |
816 | * this function is called by the tty driver when a port is opened | |
817 | * If successful, we return 0 | |
818 | * Otherwise we return a negative error number. | |
819 | *****************************************************************************/ | |
820 | ||
95da310e AC |
821 | static int mos7840_open(struct tty_struct *tty, |
822 | struct usb_serial_port *port, struct file *filp) | |
3f542974 PS |
823 | { |
824 | int response; | |
825 | int j; | |
826 | struct usb_serial *serial; | |
827 | struct urb *urb; | |
828 | __u16 Data; | |
829 | int status; | |
830 | struct moschip_port *mos7840_port; | |
0de9a702 | 831 | struct moschip_port *port0; |
3f542974 | 832 | |
441b62c1 | 833 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
834 | dbg("%s", "Port Paranoia failed \n"); |
835 | return -ENODEV; | |
836 | } | |
837 | ||
3f542974 PS |
838 | serial = port->serial; |
839 | ||
441b62c1 | 840 | if (mos7840_serial_paranoia_check(serial, __func__)) { |
3f542974 PS |
841 | dbg("%s", "Serial Paranoia failed \n"); |
842 | return -ENODEV; | |
843 | } | |
844 | ||
845 | mos7840_port = mos7840_get_port_private(port); | |
0de9a702 | 846 | port0 = mos7840_get_port_private(serial->port[0]); |
3f542974 | 847 | |
0de9a702 | 848 | if (mos7840_port == NULL || port0 == NULL) |
3f542974 PS |
849 | return -ENODEV; |
850 | ||
851 | usb_clear_halt(serial->dev, port->write_urb->pipe); | |
852 | usb_clear_halt(serial->dev, port->read_urb->pipe); | |
0de9a702 | 853 | port0->open_ports++; |
3f542974 PS |
854 | |
855 | /* Initialising the write urb pool */ | |
856 | for (j = 0; j < NUM_URBS; ++j) { | |
0de9a702 | 857 | urb = usb_alloc_urb(0, GFP_KERNEL); |
3f542974 PS |
858 | mos7840_port->write_urb_pool[j] = urb; |
859 | ||
860 | if (urb == NULL) { | |
194343d9 | 861 | dev_err(&port->dev, "No more urbs???\n"); |
3f542974 PS |
862 | continue; |
863 | } | |
864 | ||
880af9db AC |
865 | urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, |
866 | GFP_KERNEL); | |
3f542974 | 867 | if (!urb->transfer_buffer) { |
0de9a702 ON |
868 | usb_free_urb(urb); |
869 | mos7840_port->write_urb_pool[j] = NULL; | |
194343d9 GKH |
870 | dev_err(&port->dev, |
871 | "%s-out of memory for urb buffers.\n", | |
872 | __func__); | |
3f542974 PS |
873 | continue; |
874 | } | |
875 | } | |
876 | ||
877 | /***************************************************************************** | |
878 | * Initialize MCS7840 -- Write Init values to corresponding Registers | |
879 | * | |
880 | * Register Index | |
881 | * 1 : IER | |
882 | * 2 : FCR | |
883 | * 3 : LCR | |
884 | * 4 : MCR | |
885 | * | |
886 | * 0x08 : SP1/2 Control Reg | |
887 | *****************************************************************************/ | |
888 | ||
880af9db | 889 | /* NEED to check the following Block */ |
3f542974 | 890 | |
3f542974 PS |
891 | Data = 0x0; |
892 | status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); | |
893 | if (status < 0) { | |
894 | dbg("Reading Spreg failed\n"); | |
895 | return -1; | |
896 | } | |
897 | Data |= 0x80; | |
898 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); | |
899 | if (status < 0) { | |
900 | dbg("writing Spreg failed\n"); | |
901 | return -1; | |
902 | } | |
903 | ||
904 | Data &= ~0x80; | |
905 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); | |
906 | if (status < 0) { | |
907 | dbg("writing Spreg failed\n"); | |
908 | return -1; | |
909 | } | |
880af9db | 910 | /* End of block to be checked */ |
3f542974 | 911 | |
3f542974 | 912 | Data = 0x0; |
880af9db AC |
913 | status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, |
914 | &Data); | |
3f542974 PS |
915 | if (status < 0) { |
916 | dbg("Reading Controlreg failed\n"); | |
917 | return -1; | |
918 | } | |
880af9db AC |
919 | Data |= 0x08; /* Driver done bit */ |
920 | Data |= 0x20; /* rx_disable */ | |
921 | status = mos7840_set_reg_sync(port, | |
922 | mos7840_port->ControlRegOffset, Data); | |
3f542974 PS |
923 | if (status < 0) { |
924 | dbg("writing Controlreg failed\n"); | |
925 | return -1; | |
926 | } | |
880af9db AC |
927 | /* do register settings here */ |
928 | /* Set all regs to the device default values. */ | |
929 | /*********************************** | |
930 | * First Disable all interrupts. | |
931 | ***********************************/ | |
3f542974 | 932 | Data = 0x00; |
3f542974 PS |
933 | status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); |
934 | if (status < 0) { | |
935 | dbg("disableing interrupts failed\n"); | |
936 | return -1; | |
937 | } | |
880af9db | 938 | /* Set FIFO_CONTROL_REGISTER to the default value */ |
3f542974 | 939 | Data = 0x00; |
3f542974 PS |
940 | status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); |
941 | if (status < 0) { | |
942 | dbg("Writing FIFO_CONTROL_REGISTER failed\n"); | |
943 | return -1; | |
944 | } | |
945 | ||
946 | Data = 0xcf; | |
3f542974 PS |
947 | status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); |
948 | if (status < 0) { | |
949 | dbg("Writing FIFO_CONTROL_REGISTER failed\n"); | |
950 | return -1; | |
951 | } | |
952 | ||
953 | Data = 0x03; | |
3f542974 PS |
954 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
955 | mos7840_port->shadowLCR = Data; | |
956 | ||
957 | Data = 0x0b; | |
3f542974 PS |
958 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); |
959 | mos7840_port->shadowMCR = Data; | |
960 | ||
961 | Data = 0x00; | |
3f542974 PS |
962 | status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); |
963 | mos7840_port->shadowLCR = Data; | |
964 | ||
880af9db | 965 | Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ |
3f542974 PS |
966 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
967 | ||
968 | Data = 0x0c; | |
3f542974 PS |
969 | status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); |
970 | ||
971 | Data = 0x0; | |
3f542974 PS |
972 | status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); |
973 | ||
974 | Data = 0x00; | |
3f542974 PS |
975 | status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); |
976 | ||
977 | Data = Data & ~SERIAL_LCR_DLAB; | |
3f542974 PS |
978 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
979 | mos7840_port->shadowLCR = Data; | |
980 | ||
880af9db | 981 | /* clearing Bulkin and Bulkout Fifo */ |
3f542974 | 982 | Data = 0x0; |
3f542974 PS |
983 | status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); |
984 | ||
985 | Data = Data | 0x0c; | |
3f542974 PS |
986 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); |
987 | ||
988 | Data = Data & ~0x0c; | |
3f542974 | 989 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); |
880af9db | 990 | /* Finally enable all interrupts */ |
3f542974 | 991 | Data = 0x0c; |
3f542974 PS |
992 | status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); |
993 | ||
880af9db | 994 | /* clearing rx_disable */ |
3f542974 | 995 | Data = 0x0; |
880af9db AC |
996 | status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, |
997 | &Data); | |
3f542974 | 998 | Data = Data & ~0x20; |
880af9db AC |
999 | status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, |
1000 | Data); | |
3f542974 | 1001 | |
880af9db | 1002 | /* rx_negate */ |
3f542974 | 1003 | Data = 0x0; |
880af9db AC |
1004 | status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, |
1005 | &Data); | |
3f542974 | 1006 | Data = Data | 0x10; |
880af9db AC |
1007 | status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, |
1008 | Data); | |
3f542974 | 1009 | |
880af9db AC |
1010 | /* Check to see if we've set up our endpoint info yet * |
1011 | * (can't set it up in mos7840_startup as the structures * | |
1012 | * were not set up at that time.) */ | |
0de9a702 | 1013 | if (port0->open_ports == 1) { |
3f542974 | 1014 | if (serial->port[0]->interrupt_in_buffer == NULL) { |
3f542974 | 1015 | /* set up interrupt urb */ |
3f542974 | 1016 | usb_fill_int_urb(serial->port[0]->interrupt_in_urb, |
880af9db AC |
1017 | serial->dev, |
1018 | usb_rcvintpipe(serial->dev, | |
1019 | serial->port[0]->interrupt_in_endpointAddress), | |
1020 | serial->port[0]->interrupt_in_buffer, | |
1021 | serial->port[0]->interrupt_in_urb-> | |
1022 | transfer_buffer_length, | |
1023 | mos7840_interrupt_callback, | |
1024 | serial, | |
1025 | serial->port[0]->interrupt_in_urb->interval); | |
3f542974 PS |
1026 | |
1027 | /* start interrupt read for mos7840 * | |
1028 | * will continue as long as mos7840 is connected */ | |
1029 | ||
1030 | response = | |
1031 | usb_submit_urb(serial->port[0]->interrupt_in_urb, | |
1032 | GFP_KERNEL); | |
1033 | if (response) { | |
194343d9 GKH |
1034 | dev_err(&port->dev, "%s - Error %d submitting " |
1035 | "interrupt urb\n", __func__, response); | |
3f542974 PS |
1036 | } |
1037 | ||
1038 | } | |
1039 | ||
1040 | } | |
1041 | ||
1042 | /* see if we've set up our endpoint info yet * | |
1043 | * (can't set it up in mos7840_startup as the * | |
1044 | * structures were not set up at that time.) */ | |
1045 | ||
1046 | dbg("port number is %d \n", port->number); | |
1047 | dbg("serial number is %d \n", port->serial->minor); | |
1048 | dbg("Bulkin endpoint is %d \n", port->bulk_in_endpointAddress); | |
1049 | dbg("BulkOut endpoint is %d \n", port->bulk_out_endpointAddress); | |
1050 | dbg("Interrupt endpoint is %d \n", port->interrupt_in_endpointAddress); | |
1051 | dbg("port's number in the device is %d\n", mos7840_port->port_num); | |
1052 | mos7840_port->read_urb = port->read_urb; | |
1053 | ||
1054 | /* set up our bulk in urb */ | |
1055 | ||
1056 | usb_fill_bulk_urb(mos7840_port->read_urb, | |
1057 | serial->dev, | |
1058 | usb_rcvbulkpipe(serial->dev, | |
1059 | port->bulk_in_endpointAddress), | |
1060 | port->bulk_in_buffer, | |
1061 | mos7840_port->read_urb->transfer_buffer_length, | |
1062 | mos7840_bulk_in_callback, mos7840_port); | |
1063 | ||
1064 | dbg("mos7840_open: bulkin endpoint is %d\n", | |
1065 | port->bulk_in_endpointAddress); | |
50de36f7 | 1066 | mos7840_port->read_urb_busy = true; |
3f542974 PS |
1067 | response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); |
1068 | if (response) { | |
194343d9 GKH |
1069 | dev_err(&port->dev, "%s - Error %d submitting control urb\n", |
1070 | __func__, response); | |
50de36f7 | 1071 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
1072 | } |
1073 | ||
1074 | /* initialize our wait queues */ | |
1075 | init_waitqueue_head(&mos7840_port->wait_chase); | |
1076 | init_waitqueue_head(&mos7840_port->delta_msr_wait); | |
1077 | ||
1078 | /* initialize our icount structure */ | |
1079 | memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount)); | |
1080 | ||
1081 | /* initialize our port settings */ | |
880af9db AC |
1082 | /* Must set to enable ints! */ |
1083 | mos7840_port->shadowMCR = MCR_MASTER_IE; | |
3f542974 PS |
1084 | /* send a open port command */ |
1085 | mos7840_port->open = 1; | |
880af9db | 1086 | /* mos7840_change_port_settings(mos7840_port,old_termios); */ |
3f542974 PS |
1087 | mos7840_port->icount.tx = 0; |
1088 | mos7840_port->icount.rx = 0; | |
1089 | ||
880af9db AC |
1090 | dbg("\n\nusb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p\n\n", |
1091 | serial, mos7840_port, port); | |
3f542974 PS |
1092 | |
1093 | return 0; | |
1094 | ||
1095 | } | |
1096 | ||
1097 | /***************************************************************************** | |
1098 | * mos7840_chars_in_buffer | |
1099 | * this function is called by the tty driver when it wants to know how many | |
1100 | * bytes of data we currently have outstanding in the port (data that has | |
1101 | * been written, but hasn't made it out the port yet) | |
1102 | * If successful, we return the number of bytes left to be written in the | |
1103 | * system, | |
95da310e | 1104 | * Otherwise we return zero. |
3f542974 PS |
1105 | *****************************************************************************/ |
1106 | ||
95da310e | 1107 | static int mos7840_chars_in_buffer(struct tty_struct *tty) |
3f542974 | 1108 | { |
95da310e | 1109 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1110 | int i; |
1111 | int chars = 0; | |
0de9a702 | 1112 | unsigned long flags; |
3f542974 PS |
1113 | struct moschip_port *mos7840_port; |
1114 | ||
1115 | dbg("%s \n", " mos7840_chars_in_buffer:entering ..........."); | |
1116 | ||
441b62c1 | 1117 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 | 1118 | dbg("%s", "Invalid port \n"); |
95da310e | 1119 | return 0; |
3f542974 PS |
1120 | } |
1121 | ||
1122 | mos7840_port = mos7840_get_port_private(port); | |
1123 | if (mos7840_port == NULL) { | |
1124 | dbg("%s \n", "mos7840_break:leaving ..........."); | |
95da310e | 1125 | return 0; |
3f542974 PS |
1126 | } |
1127 | ||
880af9db | 1128 | spin_lock_irqsave(&mos7840_port->pool_lock, flags); |
95da310e AC |
1129 | for (i = 0; i < NUM_URBS; ++i) |
1130 | if (mos7840_port->busy[i]) | |
3f542974 | 1131 | chars += URB_TRANSFER_BUFFER_SIZE; |
880af9db | 1132 | spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); |
441b62c1 | 1133 | dbg("%s - returns %d", __func__, chars); |
0de9a702 | 1134 | return chars; |
3f542974 PS |
1135 | |
1136 | } | |
1137 | ||
3f542974 PS |
1138 | /***************************************************************************** |
1139 | * mos7840_close | |
1140 | * this function is called by the tty driver when a port is closed | |
1141 | *****************************************************************************/ | |
1142 | ||
335f8514 | 1143 | static void mos7840_close(struct usb_serial_port *port) |
3f542974 PS |
1144 | { |
1145 | struct usb_serial *serial; | |
1146 | struct moschip_port *mos7840_port; | |
0de9a702 | 1147 | struct moschip_port *port0; |
3f542974 PS |
1148 | int j; |
1149 | __u16 Data; | |
1150 | ||
1151 | dbg("%s\n", "mos7840_close:entering..."); | |
1152 | ||
441b62c1 | 1153 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
1154 | dbg("%s", "Port Paranoia failed \n"); |
1155 | return; | |
1156 | } | |
1157 | ||
441b62c1 | 1158 | serial = mos7840_get_usb_serial(port, __func__); |
3f542974 PS |
1159 | if (!serial) { |
1160 | dbg("%s", "Serial Paranoia failed \n"); | |
1161 | return; | |
1162 | } | |
1163 | ||
1164 | mos7840_port = mos7840_get_port_private(port); | |
0de9a702 | 1165 | port0 = mos7840_get_port_private(serial->port[0]); |
3f542974 | 1166 | |
0de9a702 | 1167 | if (mos7840_port == NULL || port0 == NULL) |
3f542974 | 1168 | return; |
3f542974 PS |
1169 | |
1170 | for (j = 0; j < NUM_URBS; ++j) | |
1171 | usb_kill_urb(mos7840_port->write_urb_pool[j]); | |
1172 | ||
1173 | /* Freeing Write URBs */ | |
1174 | for (j = 0; j < NUM_URBS; ++j) { | |
1175 | if (mos7840_port->write_urb_pool[j]) { | |
1176 | if (mos7840_port->write_urb_pool[j]->transfer_buffer) | |
1177 | kfree(mos7840_port->write_urb_pool[j]-> | |
1178 | transfer_buffer); | |
1179 | ||
1180 | usb_free_urb(mos7840_port->write_urb_pool[j]); | |
1181 | } | |
1182 | } | |
1183 | ||
3f542974 PS |
1184 | /* While closing port, shutdown all bulk read, write * |
1185 | * and interrupt read if they exists */ | |
1186 | if (serial->dev) { | |
3f542974 PS |
1187 | if (mos7840_port->write_urb) { |
1188 | dbg("%s", "Shutdown bulk write\n"); | |
1189 | usb_kill_urb(mos7840_port->write_urb); | |
1190 | } | |
3f542974 PS |
1191 | if (mos7840_port->read_urb) { |
1192 | dbg("%s", "Shutdown bulk read\n"); | |
1193 | usb_kill_urb(mos7840_port->read_urb); | |
50de36f7 | 1194 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
1195 | } |
1196 | if ((&mos7840_port->control_urb)) { | |
1197 | dbg("%s", "Shutdown control read\n"); | |
880af9db | 1198 | /*/ usb_kill_urb (mos7840_port->control_urb); */ |
3f542974 PS |
1199 | } |
1200 | } | |
880af9db AC |
1201 | /* if(mos7840_port->ctrl_buf != NULL) */ |
1202 | /* kfree(mos7840_port->ctrl_buf); */ | |
0de9a702 | 1203 | port0->open_ports--; |
3f542974 | 1204 | dbg("mos7840_num_open_ports in close%d:in port%d\n", |
0de9a702 ON |
1205 | port0->open_ports, port->number); |
1206 | if (port0->open_ports == 0) { | |
3f542974 PS |
1207 | if (serial->port[0]->interrupt_in_urb) { |
1208 | dbg("%s", "Shutdown interrupt_in_urb\n"); | |
0de9a702 | 1209 | usb_kill_urb(serial->port[0]->interrupt_in_urb); |
3f542974 PS |
1210 | } |
1211 | } | |
1212 | ||
1213 | if (mos7840_port->write_urb) { | |
1214 | /* if this urb had a transfer buffer already (old tx) free it */ | |
880af9db | 1215 | if (mos7840_port->write_urb->transfer_buffer != NULL) |
3f542974 | 1216 | kfree(mos7840_port->write_urb->transfer_buffer); |
3f542974 PS |
1217 | usb_free_urb(mos7840_port->write_urb); |
1218 | } | |
1219 | ||
1220 | Data = 0x0; | |
1221 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
1222 | ||
1223 | Data = 0x00; | |
1224 | mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); | |
1225 | ||
1226 | mos7840_port->open = 0; | |
1227 | ||
1228 | dbg("%s \n", "Leaving ............"); | |
1229 | } | |
1230 | ||
1231 | /************************************************************************ | |
1232 | * | |
1233 | * mos7840_block_until_chase_response | |
1234 | * | |
1235 | * This function will block the close until one of the following: | |
1236 | * 1. Response to our Chase comes from mos7840 | |
dc0d5c1e | 1237 | * 2. A timeout of 10 seconds without activity has expired |
3f542974 PS |
1238 | * (1K of mos7840 data @ 2400 baud ==> 4 sec to empty) |
1239 | * | |
1240 | ************************************************************************/ | |
1241 | ||
95da310e AC |
1242 | static void mos7840_block_until_chase_response(struct tty_struct *tty, |
1243 | struct moschip_port *mos7840_port) | |
3f542974 PS |
1244 | { |
1245 | int timeout = 1 * HZ; | |
1246 | int wait = 10; | |
1247 | int count; | |
1248 | ||
1249 | while (1) { | |
95da310e | 1250 | count = mos7840_chars_in_buffer(tty); |
3f542974 PS |
1251 | |
1252 | /* Check for Buffer status */ | |
880af9db | 1253 | if (count <= 0) |
3f542974 | 1254 | return; |
3f542974 PS |
1255 | |
1256 | /* Block the thread for a while */ | |
1257 | interruptible_sleep_on_timeout(&mos7840_port->wait_chase, | |
1258 | timeout); | |
1259 | /* No activity.. count down section */ | |
1260 | wait--; | |
1261 | if (wait == 0) { | |
441b62c1 | 1262 | dbg("%s - TIMEOUT", __func__); |
3f542974 PS |
1263 | return; |
1264 | } else { | |
dc0d5c1e | 1265 | /* Reset timeout value back to seconds */ |
3f542974 PS |
1266 | wait = 10; |
1267 | } | |
1268 | } | |
1269 | ||
1270 | } | |
1271 | ||
1272 | /***************************************************************************** | |
1273 | * mos7840_break | |
1274 | * this function sends a break to the port | |
1275 | *****************************************************************************/ | |
95da310e | 1276 | static void mos7840_break(struct tty_struct *tty, int break_state) |
3f542974 | 1277 | { |
95da310e | 1278 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1279 | unsigned char data; |
1280 | struct usb_serial *serial; | |
1281 | struct moschip_port *mos7840_port; | |
1282 | ||
1283 | dbg("%s \n", "Entering ..........."); | |
1284 | dbg("mos7840_break: Start\n"); | |
1285 | ||
441b62c1 | 1286 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
1287 | dbg("%s", "Port Paranoia failed \n"); |
1288 | return; | |
1289 | } | |
1290 | ||
441b62c1 | 1291 | serial = mos7840_get_usb_serial(port, __func__); |
3f542974 PS |
1292 | if (!serial) { |
1293 | dbg("%s", "Serial Paranoia failed \n"); | |
1294 | return; | |
1295 | } | |
1296 | ||
1297 | mos7840_port = mos7840_get_port_private(port); | |
1298 | ||
880af9db | 1299 | if (mos7840_port == NULL) |
3f542974 | 1300 | return; |
3f542974 | 1301 | |
95da310e | 1302 | if (serial->dev) |
3f542974 | 1303 | /* flush and block until tx is empty */ |
95da310e | 1304 | mos7840_block_until_chase_response(tty, mos7840_port); |
3f542974 | 1305 | |
95da310e | 1306 | if (break_state == -1) |
3f542974 | 1307 | data = mos7840_port->shadowLCR | LCR_SET_BREAK; |
95da310e | 1308 | else |
3f542974 | 1309 | data = mos7840_port->shadowLCR & ~LCR_SET_BREAK; |
3f542974 | 1310 | |
6b447f04 | 1311 | /* FIXME: no locking on shadowLCR anywhere in driver */ |
3f542974 PS |
1312 | mos7840_port->shadowLCR = data; |
1313 | dbg("mcs7840_break mos7840_port->shadowLCR is %x\n", | |
1314 | mos7840_port->shadowLCR); | |
1315 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, | |
1316 | mos7840_port->shadowLCR); | |
1317 | ||
1318 | return; | |
1319 | } | |
1320 | ||
1321 | /***************************************************************************** | |
1322 | * mos7840_write_room | |
1323 | * this function is called by the tty driver when it wants to know how many | |
1324 | * bytes of data we can accept for a specific port. | |
1325 | * If successful, we return the amount of room that we have for this port | |
1326 | * Otherwise we return a negative error number. | |
1327 | *****************************************************************************/ | |
1328 | ||
95da310e | 1329 | static int mos7840_write_room(struct tty_struct *tty) |
3f542974 | 1330 | { |
95da310e | 1331 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1332 | int i; |
1333 | int room = 0; | |
0de9a702 | 1334 | unsigned long flags; |
3f542974 PS |
1335 | struct moschip_port *mos7840_port; |
1336 | ||
1337 | dbg("%s \n", " mos7840_write_room:entering ..........."); | |
1338 | ||
441b62c1 | 1339 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
1340 | dbg("%s", "Invalid port \n"); |
1341 | dbg("%s \n", " mos7840_write_room:leaving ..........."); | |
1342 | return -1; | |
1343 | } | |
1344 | ||
1345 | mos7840_port = mos7840_get_port_private(port); | |
1346 | if (mos7840_port == NULL) { | |
1347 | dbg("%s \n", "mos7840_break:leaving ..........."); | |
1348 | return -1; | |
1349 | } | |
1350 | ||
0de9a702 | 1351 | spin_lock_irqsave(&mos7840_port->pool_lock, flags); |
3f542974 | 1352 | for (i = 0; i < NUM_URBS; ++i) { |
880af9db | 1353 | if (!mos7840_port->busy[i]) |
3f542974 | 1354 | room += URB_TRANSFER_BUFFER_SIZE; |
3f542974 | 1355 | } |
0de9a702 | 1356 | spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); |
3f542974 | 1357 | |
0de9a702 | 1358 | room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1; |
441b62c1 | 1359 | dbg("%s - returns %d", __func__, room); |
0de9a702 | 1360 | return room; |
3f542974 PS |
1361 | |
1362 | } | |
1363 | ||
1364 | /***************************************************************************** | |
1365 | * mos7840_write | |
1366 | * this function is called by the tty driver when data should be written to | |
1367 | * the port. | |
1368 | * If successful, we return the number of bytes written, otherwise we | |
1369 | * return a negative error number. | |
1370 | *****************************************************************************/ | |
1371 | ||
95da310e | 1372 | static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, |
3f542974 PS |
1373 | const unsigned char *data, int count) |
1374 | { | |
1375 | int status; | |
1376 | int i; | |
1377 | int bytes_sent = 0; | |
1378 | int transfer_size; | |
0de9a702 | 1379 | unsigned long flags; |
3f542974 PS |
1380 | |
1381 | struct moschip_port *mos7840_port; | |
1382 | struct usb_serial *serial; | |
1383 | struct urb *urb; | |
880af9db | 1384 | /* __u16 Data; */ |
3f542974 PS |
1385 | const unsigned char *current_position = data; |
1386 | unsigned char *data1; | |
1387 | dbg("%s \n", "entering ..........."); | |
880af9db AC |
1388 | /* dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", |
1389 | mos7840_port->shadowLCR); */ | |
3f542974 PS |
1390 | |
1391 | #ifdef NOTMOS7840 | |
1392 | Data = 0x00; | |
3f542974 PS |
1393 | status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); |
1394 | mos7840_port->shadowLCR = Data; | |
1395 | dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data); | |
1396 | dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", | |
1397 | mos7840_port->shadowLCR); | |
1398 | ||
880af9db AC |
1399 | /* Data = 0x03; */ |
1400 | /* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */ | |
1401 | /* mos7840_port->shadowLCR=Data;//Need to add later */ | |
3f542974 | 1402 | |
880af9db | 1403 | Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ |
3f542974 PS |
1404 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
1405 | ||
880af9db AC |
1406 | /* Data = 0x0c; */ |
1407 | /* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */ | |
3f542974 | 1408 | Data = 0x00; |
3f542974 PS |
1409 | status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data); |
1410 | dbg("mos7840_write:DLL value is %x\n", Data); | |
1411 | ||
1412 | Data = 0x0; | |
3f542974 PS |
1413 | status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data); |
1414 | dbg("mos7840_write:DLM value is %x\n", Data); | |
1415 | ||
1416 | Data = Data & ~SERIAL_LCR_DLAB; | |
1417 | dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", | |
1418 | mos7840_port->shadowLCR); | |
3f542974 PS |
1419 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
1420 | #endif | |
1421 | ||
441b62c1 | 1422 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
1423 | dbg("%s", "Port Paranoia failed \n"); |
1424 | return -1; | |
1425 | } | |
1426 | ||
1427 | serial = port->serial; | |
441b62c1 | 1428 | if (mos7840_serial_paranoia_check(serial, __func__)) { |
3f542974 PS |
1429 | dbg("%s", "Serial Paranoia failed \n"); |
1430 | return -1; | |
1431 | } | |
1432 | ||
1433 | mos7840_port = mos7840_get_port_private(port); | |
1434 | if (mos7840_port == NULL) { | |
1435 | dbg("%s", "mos7840_port is NULL\n"); | |
1436 | return -1; | |
1437 | } | |
1438 | ||
1439 | /* try to find a free urb in the list */ | |
1440 | urb = NULL; | |
1441 | ||
0de9a702 | 1442 | spin_lock_irqsave(&mos7840_port->pool_lock, flags); |
3f542974 | 1443 | for (i = 0; i < NUM_URBS; ++i) { |
0de9a702 ON |
1444 | if (!mos7840_port->busy[i]) { |
1445 | mos7840_port->busy[i] = 1; | |
3f542974 PS |
1446 | urb = mos7840_port->write_urb_pool[i]; |
1447 | dbg("\nURB:%d", i); | |
1448 | break; | |
1449 | } | |
1450 | } | |
0de9a702 | 1451 | spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); |
3f542974 PS |
1452 | |
1453 | if (urb == NULL) { | |
441b62c1 | 1454 | dbg("%s - no more free urbs", __func__); |
3f542974 PS |
1455 | goto exit; |
1456 | } | |
1457 | ||
1458 | if (urb->transfer_buffer == NULL) { | |
1459 | urb->transfer_buffer = | |
1460 | kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); | |
1461 | ||
1462 | if (urb->transfer_buffer == NULL) { | |
194343d9 GKH |
1463 | dev_err(&port->dev, "%s no more kernel memory...\n", |
1464 | __func__); | |
3f542974 PS |
1465 | goto exit; |
1466 | } | |
1467 | } | |
1468 | transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); | |
1469 | ||
97c4965d | 1470 | memcpy(urb->transfer_buffer, current_position, transfer_size); |
3f542974 PS |
1471 | |
1472 | /* fill urb with data and submit */ | |
1473 | usb_fill_bulk_urb(urb, | |
1474 | serial->dev, | |
1475 | usb_sndbulkpipe(serial->dev, | |
1476 | port->bulk_out_endpointAddress), | |
1477 | urb->transfer_buffer, | |
1478 | transfer_size, | |
1479 | mos7840_bulk_out_data_callback, mos7840_port); | |
1480 | ||
1481 | data1 = urb->transfer_buffer; | |
1482 | dbg("\nbulkout endpoint is %d", port->bulk_out_endpointAddress); | |
1483 | ||
1484 | /* send it down the pipe */ | |
1485 | status = usb_submit_urb(urb, GFP_ATOMIC); | |
1486 | ||
1487 | if (status) { | |
0de9a702 | 1488 | mos7840_port->busy[i] = 0; |
194343d9 GKH |
1489 | dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " |
1490 | "with status = %d\n", __func__, status); | |
3f542974 PS |
1491 | bytes_sent = status; |
1492 | goto exit; | |
1493 | } | |
1494 | bytes_sent = transfer_size; | |
1495 | mos7840_port->icount.tx += transfer_size; | |
0de9a702 | 1496 | smp_wmb(); |
3f542974 | 1497 | dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx); |
95da310e | 1498 | exit: |
3f542974 PS |
1499 | return bytes_sent; |
1500 | ||
1501 | } | |
1502 | ||
1503 | /***************************************************************************** | |
1504 | * mos7840_throttle | |
1505 | * this function is called by the tty driver when it wants to stop the data | |
1506 | * being read from the port. | |
1507 | *****************************************************************************/ | |
1508 | ||
95da310e | 1509 | static void mos7840_throttle(struct tty_struct *tty) |
3f542974 | 1510 | { |
95da310e | 1511 | struct usb_serial_port *port = tty->driver_data; |
3f542974 | 1512 | struct moschip_port *mos7840_port; |
3f542974 PS |
1513 | int status; |
1514 | ||
441b62c1 | 1515 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
1516 | dbg("%s", "Invalid port \n"); |
1517 | return; | |
1518 | } | |
1519 | ||
1520 | dbg("- port %d\n", port->number); | |
1521 | ||
1522 | mos7840_port = mos7840_get_port_private(port); | |
1523 | ||
1524 | if (mos7840_port == NULL) | |
1525 | return; | |
1526 | ||
1527 | if (!mos7840_port->open) { | |
1528 | dbg("%s\n", "port not opened"); | |
1529 | return; | |
1530 | } | |
1531 | ||
1532 | dbg("%s", "Entering .......... \n"); | |
1533 | ||
3f542974 PS |
1534 | /* if we are implementing XON/XOFF, send the stop character */ |
1535 | if (I_IXOFF(tty)) { | |
1536 | unsigned char stop_char = STOP_CHAR(tty); | |
95da310e AC |
1537 | status = mos7840_write(tty, port, &stop_char, 1); |
1538 | if (status <= 0) | |
3f542974 | 1539 | return; |
3f542974 | 1540 | } |
3f542974 PS |
1541 | /* if we are implementing RTS/CTS, toggle that line */ |
1542 | if (tty->termios->c_cflag & CRTSCTS) { | |
1543 | mos7840_port->shadowMCR &= ~MCR_RTS; | |
95da310e | 1544 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, |
3f542974 | 1545 | mos7840_port->shadowMCR); |
95da310e | 1546 | if (status < 0) |
3f542974 | 1547 | return; |
3f542974 PS |
1548 | } |
1549 | ||
1550 | return; | |
1551 | } | |
1552 | ||
1553 | /***************************************************************************** | |
1554 | * mos7840_unthrottle | |
880af9db AC |
1555 | * this function is called by the tty driver when it wants to resume |
1556 | * the data being read from the port (called after mos7840_throttle is | |
1557 | * called) | |
3f542974 | 1558 | *****************************************************************************/ |
95da310e | 1559 | static void mos7840_unthrottle(struct tty_struct *tty) |
3f542974 | 1560 | { |
95da310e | 1561 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1562 | int status; |
1563 | struct moschip_port *mos7840_port = mos7840_get_port_private(port); | |
1564 | ||
441b62c1 | 1565 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
1566 | dbg("%s", "Invalid port \n"); |
1567 | return; | |
1568 | } | |
1569 | ||
1570 | if (mos7840_port == NULL) | |
1571 | return; | |
1572 | ||
1573 | if (!mos7840_port->open) { | |
441b62c1 | 1574 | dbg("%s - port not opened", __func__); |
3f542974 PS |
1575 | return; |
1576 | } | |
1577 | ||
1578 | dbg("%s", "Entering .......... \n"); | |
1579 | ||
3f542974 PS |
1580 | /* if we are implementing XON/XOFF, send the start character */ |
1581 | if (I_IXOFF(tty)) { | |
1582 | unsigned char start_char = START_CHAR(tty); | |
95da310e AC |
1583 | status = mos7840_write(tty, port, &start_char, 1); |
1584 | if (status <= 0) | |
3f542974 | 1585 | return; |
3f542974 PS |
1586 | } |
1587 | ||
1588 | /* if we are implementing RTS/CTS, toggle that line */ | |
1589 | if (tty->termios->c_cflag & CRTSCTS) { | |
1590 | mos7840_port->shadowMCR |= MCR_RTS; | |
95da310e | 1591 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, |
3f542974 | 1592 | mos7840_port->shadowMCR); |
95da310e | 1593 | if (status < 0) |
3f542974 | 1594 | return; |
3f542974 | 1595 | } |
3f542974 PS |
1596 | } |
1597 | ||
95da310e | 1598 | static int mos7840_tiocmget(struct tty_struct *tty, struct file *file) |
3f542974 | 1599 | { |
95da310e | 1600 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1601 | struct moschip_port *mos7840_port; |
1602 | unsigned int result; | |
1603 | __u16 msr; | |
1604 | __u16 mcr; | |
880af9db | 1605 | int status; |
3f542974 PS |
1606 | mos7840_port = mos7840_get_port_private(port); |
1607 | ||
441b62c1 | 1608 | dbg("%s - port %d", __func__, port->number); |
3f542974 PS |
1609 | |
1610 | if (mos7840_port == NULL) | |
1611 | return -ENODEV; | |
1612 | ||
1613 | status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr); | |
1614 | status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr); | |
1615 | result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) | |
1616 | | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) | |
1617 | | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0) | |
1618 | | ((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) | |
1619 | | ((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) | |
1620 | | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) | |
1621 | | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); | |
1622 | ||
441b62c1 | 1623 | dbg("%s - 0x%04X", __func__, result); |
3f542974 PS |
1624 | |
1625 | return result; | |
1626 | } | |
1627 | ||
95da310e | 1628 | static int mos7840_tiocmset(struct tty_struct *tty, struct file *file, |
3f542974 PS |
1629 | unsigned int set, unsigned int clear) |
1630 | { | |
95da310e | 1631 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1632 | struct moschip_port *mos7840_port; |
1633 | unsigned int mcr; | |
87521c46 | 1634 | int status; |
3f542974 | 1635 | |
441b62c1 | 1636 | dbg("%s - port %d", __func__, port->number); |
3f542974 PS |
1637 | |
1638 | mos7840_port = mos7840_get_port_private(port); | |
1639 | ||
1640 | if (mos7840_port == NULL) | |
1641 | return -ENODEV; | |
1642 | ||
e2984494 | 1643 | /* FIXME: What locks the port registers ? */ |
3f542974 PS |
1644 | mcr = mos7840_port->shadowMCR; |
1645 | if (clear & TIOCM_RTS) | |
1646 | mcr &= ~MCR_RTS; | |
1647 | if (clear & TIOCM_DTR) | |
1648 | mcr &= ~MCR_DTR; | |
1649 | if (clear & TIOCM_LOOP) | |
1650 | mcr &= ~MCR_LOOPBACK; | |
1651 | ||
1652 | if (set & TIOCM_RTS) | |
1653 | mcr |= MCR_RTS; | |
1654 | if (set & TIOCM_DTR) | |
1655 | mcr |= MCR_DTR; | |
1656 | if (set & TIOCM_LOOP) | |
1657 | mcr |= MCR_LOOPBACK; | |
1658 | ||
1659 | mos7840_port->shadowMCR = mcr; | |
1660 | ||
3f542974 PS |
1661 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr); |
1662 | if (status < 0) { | |
1663 | dbg("setting MODEM_CONTROL_REGISTER Failed\n"); | |
87521c46 | 1664 | return status; |
3f542974 PS |
1665 | } |
1666 | ||
1667 | return 0; | |
1668 | } | |
1669 | ||
1670 | /***************************************************************************** | |
1671 | * mos7840_calc_baud_rate_divisor | |
1672 | * this function calculates the proper baud rate divisor for the specified | |
1673 | * baud rate. | |
1674 | *****************************************************************************/ | |
1675 | static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, | |
880af9db | 1676 | __u16 *clk_sel_val) |
3f542974 PS |
1677 | { |
1678 | ||
441b62c1 | 1679 | dbg("%s - %d", __func__, baudRate); |
3f542974 PS |
1680 | |
1681 | if (baudRate <= 115200) { | |
1682 | *divisor = 115200 / baudRate; | |
1683 | *clk_sel_val = 0x0; | |
1684 | } | |
1685 | if ((baudRate > 115200) && (baudRate <= 230400)) { | |
1686 | *divisor = 230400 / baudRate; | |
1687 | *clk_sel_val = 0x10; | |
1688 | } else if ((baudRate > 230400) && (baudRate <= 403200)) { | |
1689 | *divisor = 403200 / baudRate; | |
1690 | *clk_sel_val = 0x20; | |
1691 | } else if ((baudRate > 403200) && (baudRate <= 460800)) { | |
1692 | *divisor = 460800 / baudRate; | |
1693 | *clk_sel_val = 0x30; | |
1694 | } else if ((baudRate > 460800) && (baudRate <= 806400)) { | |
1695 | *divisor = 806400 / baudRate; | |
1696 | *clk_sel_val = 0x40; | |
1697 | } else if ((baudRate > 806400) && (baudRate <= 921600)) { | |
1698 | *divisor = 921600 / baudRate; | |
1699 | *clk_sel_val = 0x50; | |
1700 | } else if ((baudRate > 921600) && (baudRate <= 1572864)) { | |
1701 | *divisor = 1572864 / baudRate; | |
1702 | *clk_sel_val = 0x60; | |
1703 | } else if ((baudRate > 1572864) && (baudRate <= 3145728)) { | |
1704 | *divisor = 3145728 / baudRate; | |
1705 | *clk_sel_val = 0x70; | |
1706 | } | |
1707 | return 0; | |
1708 | ||
1709 | #ifdef NOTMCS7840 | |
1710 | ||
1711 | for (i = 0; i < ARRAY_SIZE(mos7840_divisor_table); i++) { | |
1712 | if (mos7840_divisor_table[i].BaudRate == baudrate) { | |
1713 | *divisor = mos7840_divisor_table[i].Divisor; | |
1714 | return 0; | |
1715 | } | |
1716 | } | |
1717 | ||
1718 | /* After trying for all the standard baud rates * | |
1719 | * Try calculating the divisor for this baud rate */ | |
1720 | ||
1721 | if (baudrate > 75 && baudrate < 230400) { | |
1722 | /* get the divisor */ | |
1723 | custom = (__u16) (230400L / baudrate); | |
1724 | ||
1725 | /* Check for round off */ | |
1726 | round1 = (__u16) (2304000L / baudrate); | |
1727 | round = (__u16) (round1 - (custom * 10)); | |
880af9db | 1728 | if (round > 4) |
3f542974 | 1729 | custom++; |
3f542974 PS |
1730 | *divisor = custom; |
1731 | ||
1732 | dbg(" Baud %d = %d\n", baudrate, custom); | |
1733 | return 0; | |
1734 | } | |
1735 | ||
1736 | dbg("%s\n", " Baud calculation Failed..."); | |
1737 | return -1; | |
1738 | #endif | |
1739 | } | |
1740 | ||
1741 | /***************************************************************************** | |
1742 | * mos7840_send_cmd_write_baud_rate | |
1743 | * this function sends the proper command to change the baud rate of the | |
1744 | * specified port. | |
1745 | *****************************************************************************/ | |
1746 | ||
1747 | static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, | |
1748 | int baudRate) | |
1749 | { | |
1750 | int divisor = 0; | |
1751 | int status; | |
1752 | __u16 Data; | |
1753 | unsigned char number; | |
1754 | __u16 clk_sel_val; | |
1755 | struct usb_serial_port *port; | |
1756 | ||
1757 | if (mos7840_port == NULL) | |
1758 | return -1; | |
1759 | ||
1760 | port = (struct usb_serial_port *)mos7840_port->port; | |
441b62c1 | 1761 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
1762 | dbg("%s", "Invalid port \n"); |
1763 | return -1; | |
1764 | } | |
1765 | ||
441b62c1 | 1766 | if (mos7840_serial_paranoia_check(port->serial, __func__)) { |
3f542974 PS |
1767 | dbg("%s", "Invalid Serial \n"); |
1768 | return -1; | |
1769 | } | |
1770 | ||
1771 | dbg("%s", "Entering .......... \n"); | |
1772 | ||
1773 | number = mos7840_port->port->number - mos7840_port->port->serial->minor; | |
1774 | ||
441b62c1 | 1775 | dbg("%s - port = %d, baud = %d", __func__, |
3f542974 | 1776 | mos7840_port->port->number, baudRate); |
880af9db | 1777 | /* reset clk_uart_sel in spregOffset */ |
3f542974 PS |
1778 | if (baudRate > 115200) { |
1779 | #ifdef HW_flow_control | |
880af9db AC |
1780 | /* NOTE: need to see the pther register to modify */ |
1781 | /* setting h/w flow control bit to 1 */ | |
3f542974 PS |
1782 | Data = 0x2b; |
1783 | mos7840_port->shadowMCR = Data; | |
880af9db AC |
1784 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, |
1785 | Data); | |
3f542974 PS |
1786 | if (status < 0) { |
1787 | dbg("Writing spreg failed in set_serial_baud\n"); | |
1788 | return -1; | |
1789 | } | |
1790 | #endif | |
1791 | ||
1792 | } else { | |
1793 | #ifdef HW_flow_control | |
880af9db | 1794 | / *setting h/w flow control bit to 0 */ |
3f542974 PS |
1795 | Data = 0xb; |
1796 | mos7840_port->shadowMCR = Data; | |
880af9db AC |
1797 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, |
1798 | Data); | |
3f542974 PS |
1799 | if (status < 0) { |
1800 | dbg("Writing spreg failed in set_serial_baud\n"); | |
1801 | return -1; | |
1802 | } | |
1803 | #endif | |
1804 | ||
1805 | } | |
1806 | ||
880af9db | 1807 | if (1) { /* baudRate <= 115200) */ |
3f542974 PS |
1808 | clk_sel_val = 0x0; |
1809 | Data = 0x0; | |
880af9db | 1810 | status = mos7840_calc_baud_rate_divisor(baudRate, &divisor, |
3f542974 | 1811 | &clk_sel_val); |
880af9db AC |
1812 | status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, |
1813 | &Data); | |
3f542974 PS |
1814 | if (status < 0) { |
1815 | dbg("reading spreg failed in set_serial_baud\n"); | |
1816 | return -1; | |
1817 | } | |
1818 | Data = (Data & 0x8f) | clk_sel_val; | |
880af9db AC |
1819 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, |
1820 | Data); | |
3f542974 PS |
1821 | if (status < 0) { |
1822 | dbg("Writing spreg failed in set_serial_baud\n"); | |
1823 | return -1; | |
1824 | } | |
1825 | /* Calculate the Divisor */ | |
1826 | ||
1827 | if (status) { | |
194343d9 | 1828 | dev_err(&port->dev, "%s - bad baud rate\n", __func__); |
3f542974 PS |
1829 | return status; |
1830 | } | |
1831 | /* Enable access to divisor latch */ | |
1832 | Data = mos7840_port->shadowLCR | SERIAL_LCR_DLAB; | |
1833 | mos7840_port->shadowLCR = Data; | |
1834 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
1835 | ||
1836 | /* Write the divisor */ | |
1837 | Data = (unsigned char)(divisor & 0xff); | |
1838 | dbg("set_serial_baud Value to write DLL is %x\n", Data); | |
1839 | mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); | |
1840 | ||
1841 | Data = (unsigned char)((divisor & 0xff00) >> 8); | |
1842 | dbg("set_serial_baud Value to write DLM is %x\n", Data); | |
1843 | mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); | |
1844 | ||
1845 | /* Disable access to divisor latch */ | |
1846 | Data = mos7840_port->shadowLCR & ~SERIAL_LCR_DLAB; | |
1847 | mos7840_port->shadowLCR = Data; | |
1848 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
1849 | ||
1850 | } | |
3f542974 PS |
1851 | return status; |
1852 | } | |
1853 | ||
1854 | /***************************************************************************** | |
1855 | * mos7840_change_port_settings | |
1856 | * This routine is called to set the UART on the device to match | |
1857 | * the specified new settings. | |
1858 | *****************************************************************************/ | |
1859 | ||
95da310e AC |
1860 | static void mos7840_change_port_settings(struct tty_struct *tty, |
1861 | struct moschip_port *mos7840_port, struct ktermios *old_termios) | |
3f542974 | 1862 | { |
3f542974 PS |
1863 | int baud; |
1864 | unsigned cflag; | |
1865 | unsigned iflag; | |
1866 | __u8 lData; | |
1867 | __u8 lParity; | |
1868 | __u8 lStop; | |
1869 | int status; | |
1870 | __u16 Data; | |
1871 | struct usb_serial_port *port; | |
1872 | struct usb_serial *serial; | |
1873 | ||
1874 | if (mos7840_port == NULL) | |
1875 | return; | |
1876 | ||
1877 | port = (struct usb_serial_port *)mos7840_port->port; | |
1878 | ||
441b62c1 | 1879 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
1880 | dbg("%s", "Invalid port \n"); |
1881 | return; | |
1882 | } | |
1883 | ||
441b62c1 | 1884 | if (mos7840_serial_paranoia_check(port->serial, __func__)) { |
3f542974 PS |
1885 | dbg("%s", "Invalid Serial \n"); |
1886 | return; | |
1887 | } | |
1888 | ||
1889 | serial = port->serial; | |
1890 | ||
441b62c1 | 1891 | dbg("%s - port %d", __func__, mos7840_port->port->number); |
3f542974 PS |
1892 | |
1893 | if (!mos7840_port->open) { | |
441b62c1 | 1894 | dbg("%s - port not opened", __func__); |
3f542974 PS |
1895 | return; |
1896 | } | |
1897 | ||
3f542974 PS |
1898 | dbg("%s", "Entering .......... \n"); |
1899 | ||
1900 | lData = LCR_BITS_8; | |
1901 | lStop = LCR_STOP_1; | |
1902 | lParity = LCR_PAR_NONE; | |
1903 | ||
1904 | cflag = tty->termios->c_cflag; | |
1905 | iflag = tty->termios->c_iflag; | |
1906 | ||
1907 | /* Change the number of bits */ | |
1908 | if (cflag & CSIZE) { | |
1909 | switch (cflag & CSIZE) { | |
1910 | case CS5: | |
1911 | lData = LCR_BITS_5; | |
1912 | break; | |
1913 | ||
1914 | case CS6: | |
1915 | lData = LCR_BITS_6; | |
1916 | break; | |
1917 | ||
1918 | case CS7: | |
1919 | lData = LCR_BITS_7; | |
1920 | break; | |
1921 | default: | |
1922 | case CS8: | |
1923 | lData = LCR_BITS_8; | |
1924 | break; | |
1925 | } | |
1926 | } | |
1927 | /* Change the Parity bit */ | |
1928 | if (cflag & PARENB) { | |
1929 | if (cflag & PARODD) { | |
1930 | lParity = LCR_PAR_ODD; | |
441b62c1 | 1931 | dbg("%s - parity = odd", __func__); |
3f542974 PS |
1932 | } else { |
1933 | lParity = LCR_PAR_EVEN; | |
441b62c1 | 1934 | dbg("%s - parity = even", __func__); |
3f542974 PS |
1935 | } |
1936 | ||
1937 | } else { | |
441b62c1 | 1938 | dbg("%s - parity = none", __func__); |
3f542974 PS |
1939 | } |
1940 | ||
880af9db | 1941 | if (cflag & CMSPAR) |
3f542974 | 1942 | lParity = lParity | 0x20; |
3f542974 PS |
1943 | |
1944 | /* Change the Stop bit */ | |
1945 | if (cflag & CSTOPB) { | |
1946 | lStop = LCR_STOP_2; | |
441b62c1 | 1947 | dbg("%s - stop bits = 2", __func__); |
3f542974 PS |
1948 | } else { |
1949 | lStop = LCR_STOP_1; | |
441b62c1 | 1950 | dbg("%s - stop bits = 1", __func__); |
3f542974 PS |
1951 | } |
1952 | ||
1953 | /* Update the LCR with the correct value */ | |
1954 | mos7840_port->shadowLCR &= | |
1955 | ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); | |
1956 | mos7840_port->shadowLCR |= (lData | lParity | lStop); | |
1957 | ||
1958 | dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x\n", | |
1959 | mos7840_port->shadowLCR); | |
1960 | /* Disable Interrupts */ | |
1961 | Data = 0x00; | |
1962 | mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); | |
1963 | ||
1964 | Data = 0x00; | |
1965 | mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); | |
1966 | ||
1967 | Data = 0xcf; | |
1968 | mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); | |
1969 | ||
1970 | /* Send the updated LCR value to the mos7840 */ | |
1971 | Data = mos7840_port->shadowLCR; | |
1972 | ||
1973 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
1974 | ||
1975 | Data = 0x00b; | |
1976 | mos7840_port->shadowMCR = Data; | |
1977 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
1978 | Data = 0x00b; | |
1979 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
1980 | ||
1981 | /* set up the MCR register and send it to the mos7840 */ | |
1982 | ||
1983 | mos7840_port->shadowMCR = MCR_MASTER_IE; | |
880af9db | 1984 | if (cflag & CBAUD) |
3f542974 | 1985 | mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS); |
3f542974 | 1986 | |
880af9db | 1987 | if (cflag & CRTSCTS) |
3f542974 | 1988 | mos7840_port->shadowMCR |= (MCR_XON_ANY); |
880af9db | 1989 | else |
3f542974 | 1990 | mos7840_port->shadowMCR &= ~(MCR_XON_ANY); |
3f542974 PS |
1991 | |
1992 | Data = mos7840_port->shadowMCR; | |
1993 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
1994 | ||
1995 | /* Determine divisor based on baud rate */ | |
1996 | baud = tty_get_baud_rate(tty); | |
1997 | ||
1998 | if (!baud) { | |
1999 | /* pick a default, any default... */ | |
2000 | dbg("%s\n", "Picked default baud..."); | |
2001 | baud = 9600; | |
2002 | } | |
2003 | ||
441b62c1 | 2004 | dbg("%s - baud rate = %d", __func__, baud); |
3f542974 PS |
2005 | status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud); |
2006 | ||
2007 | /* Enable Interrupts */ | |
2008 | Data = 0x0c; | |
2009 | mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); | |
2010 | ||
50de36f7 | 2011 | if (mos7840_port->read_urb_busy == false) { |
3f542974 | 2012 | mos7840_port->read_urb->dev = serial->dev; |
50de36f7 | 2013 | mos7840_port->read_urb_busy = true; |
3f542974 | 2014 | status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); |
3f542974 | 2015 | if (status) { |
50de36f7 | 2016 | dbg("usb_submit_urb(read bulk) failed, status = %d", |
3f542974 | 2017 | status); |
50de36f7 | 2018 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
2019 | } |
2020 | } | |
2021 | wake_up(&mos7840_port->delta_msr_wait); | |
2022 | mos7840_port->delta_msr_cond = 1; | |
2023 | dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x\n", | |
2024 | mos7840_port->shadowLCR); | |
2025 | ||
2026 | return; | |
2027 | } | |
2028 | ||
2029 | /***************************************************************************** | |
2030 | * mos7840_set_termios | |
2031 | * this function is called by the tty driver when it wants to change | |
2032 | * the termios structure | |
2033 | *****************************************************************************/ | |
2034 | ||
95da310e AC |
2035 | static void mos7840_set_termios(struct tty_struct *tty, |
2036 | struct usb_serial_port *port, | |
606d099c | 2037 | struct ktermios *old_termios) |
3f542974 PS |
2038 | { |
2039 | int status; | |
2040 | unsigned int cflag; | |
2041 | struct usb_serial *serial; | |
2042 | struct moschip_port *mos7840_port; | |
3f542974 | 2043 | dbg("mos7840_set_termios: START\n"); |
441b62c1 | 2044 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
2045 | dbg("%s", "Invalid port \n"); |
2046 | return; | |
2047 | } | |
2048 | ||
2049 | serial = port->serial; | |
2050 | ||
441b62c1 | 2051 | if (mos7840_serial_paranoia_check(serial, __func__)) { |
3f542974 PS |
2052 | dbg("%s", "Invalid Serial \n"); |
2053 | return; | |
2054 | } | |
2055 | ||
2056 | mos7840_port = mos7840_get_port_private(port); | |
2057 | ||
2058 | if (mos7840_port == NULL) | |
2059 | return; | |
2060 | ||
3f542974 | 2061 | if (!mos7840_port->open) { |
441b62c1 | 2062 | dbg("%s - port not opened", __func__); |
3f542974 PS |
2063 | return; |
2064 | } | |
2065 | ||
2066 | dbg("%s\n", "setting termios - "); | |
2067 | ||
2068 | cflag = tty->termios->c_cflag; | |
2069 | ||
441b62c1 | 2070 | dbg("%s - clfag %08x iflag %08x", __func__, |
3f542974 | 2071 | tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); |
441b62c1 | 2072 | dbg("%s - old clfag %08x old iflag %08x", __func__, |
3d3ddce5 | 2073 | old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); |
441b62c1 | 2074 | dbg("%s - port %d", __func__, port->number); |
3f542974 PS |
2075 | |
2076 | /* change the port settings to the new ones specified */ | |
2077 | ||
95da310e | 2078 | mos7840_change_port_settings(tty, mos7840_port, old_termios); |
3f542974 PS |
2079 | |
2080 | if (!mos7840_port->read_urb) { | |
2081 | dbg("%s", "URB KILLED !!!!!\n"); | |
2082 | return; | |
2083 | } | |
2084 | ||
50de36f7 | 2085 | if (mos7840_port->read_urb_busy == false) { |
3f542974 | 2086 | mos7840_port->read_urb->dev = serial->dev; |
50de36f7 | 2087 | mos7840_port->read_urb_busy = true; |
3f542974 PS |
2088 | status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); |
2089 | if (status) { | |
50de36f7 | 2090 | dbg("usb_submit_urb(read bulk) failed, status = %d", |
3f542974 | 2091 | status); |
50de36f7 | 2092 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
2093 | } |
2094 | } | |
2095 | return; | |
2096 | } | |
2097 | ||
2098 | /***************************************************************************** | |
2099 | * mos7840_get_lsr_info - get line status register info | |
2100 | * | |
2101 | * Purpose: Let user call ioctl() to get info when the UART physically | |
2102 | * is emptied. On bus types like RS485, the transmitter must | |
2103 | * release the bus after transmitting. This must be done when | |
2104 | * the transmit shift register is empty, not be done when the | |
2105 | * transmit holding register is empty. This functionality | |
2106 | * allows an RS485 driver to be written in user space. | |
2107 | *****************************************************************************/ | |
2108 | ||
95da310e | 2109 | static int mos7840_get_lsr_info(struct tty_struct *tty, |
97c4965d | 2110 | unsigned int __user *value) |
3f542974 PS |
2111 | { |
2112 | int count; | |
2113 | unsigned int result = 0; | |
2114 | ||
95da310e | 2115 | count = mos7840_chars_in_buffer(tty); |
3f542974 | 2116 | if (count == 0) { |
441b62c1 | 2117 | dbg("%s -- Empty", __func__); |
3f542974 PS |
2118 | result = TIOCSER_TEMT; |
2119 | } | |
2120 | ||
2121 | if (copy_to_user(value, &result, sizeof(int))) | |
2122 | return -EFAULT; | |
2123 | return 0; | |
2124 | } | |
2125 | ||
3f542974 PS |
2126 | /***************************************************************************** |
2127 | * mos7840_set_modem_info | |
2128 | * function to set modem info | |
2129 | *****************************************************************************/ | |
2130 | ||
95da310e AC |
2131 | /* FIXME: Should be using the model control hooks */ |
2132 | ||
3f542974 | 2133 | static int mos7840_set_modem_info(struct moschip_port *mos7840_port, |
97c4965d | 2134 | unsigned int cmd, unsigned int __user *value) |
3f542974 PS |
2135 | { |
2136 | unsigned int mcr; | |
2137 | unsigned int arg; | |
2138 | __u16 Data; | |
2139 | int status; | |
2140 | struct usb_serial_port *port; | |
2141 | ||
2142 | if (mos7840_port == NULL) | |
2143 | return -1; | |
2144 | ||
2145 | port = (struct usb_serial_port *)mos7840_port->port; | |
441b62c1 | 2146 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
2147 | dbg("%s", "Invalid port \n"); |
2148 | return -1; | |
2149 | } | |
2150 | ||
2151 | mcr = mos7840_port->shadowMCR; | |
2152 | ||
2153 | if (copy_from_user(&arg, value, sizeof(int))) | |
2154 | return -EFAULT; | |
2155 | ||
2156 | switch (cmd) { | |
2157 | case TIOCMBIS: | |
2158 | if (arg & TIOCM_RTS) | |
2159 | mcr |= MCR_RTS; | |
2160 | if (arg & TIOCM_DTR) | |
2161 | mcr |= MCR_RTS; | |
2162 | if (arg & TIOCM_LOOP) | |
2163 | mcr |= MCR_LOOPBACK; | |
2164 | break; | |
2165 | ||
2166 | case TIOCMBIC: | |
2167 | if (arg & TIOCM_RTS) | |
2168 | mcr &= ~MCR_RTS; | |
2169 | if (arg & TIOCM_DTR) | |
2170 | mcr &= ~MCR_RTS; | |
2171 | if (arg & TIOCM_LOOP) | |
2172 | mcr &= ~MCR_LOOPBACK; | |
2173 | break; | |
2174 | ||
2175 | case TIOCMSET: | |
2176 | /* turn off the RTS and DTR and LOOPBACK | |
2177 | * and then only turn on what was asked to */ | |
2178 | mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK); | |
2179 | mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0); | |
2180 | mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0); | |
2181 | mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0); | |
2182 | break; | |
2183 | } | |
2184 | ||
6b447f04 | 2185 | lock_kernel(); |
3f542974 PS |
2186 | mos7840_port->shadowMCR = mcr; |
2187 | ||
2188 | Data = mos7840_port->shadowMCR; | |
3f542974 | 2189 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); |
6b447f04 | 2190 | unlock_kernel(); |
3f542974 PS |
2191 | if (status < 0) { |
2192 | dbg("setting MODEM_CONTROL_REGISTER Failed\n"); | |
2193 | return -1; | |
2194 | } | |
2195 | ||
2196 | return 0; | |
2197 | } | |
2198 | ||
2199 | /***************************************************************************** | |
2200 | * mos7840_get_modem_info | |
2201 | * function to get modem info | |
2202 | *****************************************************************************/ | |
2203 | ||
2204 | static int mos7840_get_modem_info(struct moschip_port *mos7840_port, | |
97c4965d | 2205 | unsigned int __user *value) |
3f542974 PS |
2206 | { |
2207 | unsigned int result = 0; | |
2208 | __u16 msr; | |
2209 | unsigned int mcr = mos7840_port->shadowMCR; | |
880af9db | 2210 | mos7840_get_uart_reg(mos7840_port->port, |
95da310e | 2211 | MODEM_STATUS_REGISTER, &msr); |
3f542974 PS |
2212 | result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */ |
2213 | |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */ | |
2214 | |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */ | |
2215 | |((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) /* 0x040 */ | |
2216 | |((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ | |
2217 | |((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ | |
2218 | ||
441b62c1 | 2219 | dbg("%s -- %x", __func__, result); |
3f542974 PS |
2220 | |
2221 | if (copy_to_user(value, &result, sizeof(int))) | |
2222 | return -EFAULT; | |
2223 | return 0; | |
2224 | } | |
2225 | ||
2226 | /***************************************************************************** | |
2227 | * mos7840_get_serial_info | |
2228 | * function to get information about serial port | |
2229 | *****************************************************************************/ | |
2230 | ||
2231 | static int mos7840_get_serial_info(struct moschip_port *mos7840_port, | |
97c4965d | 2232 | struct serial_struct __user *retinfo) |
3f542974 PS |
2233 | { |
2234 | struct serial_struct tmp; | |
2235 | ||
2236 | if (mos7840_port == NULL) | |
2237 | return -1; | |
2238 | ||
2239 | if (!retinfo) | |
2240 | return -EFAULT; | |
2241 | ||
2242 | memset(&tmp, 0, sizeof(tmp)); | |
2243 | ||
2244 | tmp.type = PORT_16550A; | |
2245 | tmp.line = mos7840_port->port->serial->minor; | |
2246 | tmp.port = mos7840_port->port->number; | |
2247 | tmp.irq = 0; | |
2248 | tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; | |
2249 | tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; | |
2250 | tmp.baud_base = 9600; | |
2251 | tmp.close_delay = 5 * HZ; | |
2252 | tmp.closing_wait = 30 * HZ; | |
2253 | ||
2254 | if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) | |
2255 | return -EFAULT; | |
2256 | return 0; | |
2257 | } | |
2258 | ||
2259 | /***************************************************************************** | |
2260 | * SerialIoctl | |
2261 | * this function handles any ioctl calls to the driver | |
2262 | *****************************************************************************/ | |
2263 | ||
95da310e | 2264 | static int mos7840_ioctl(struct tty_struct *tty, struct file *file, |
3f542974 PS |
2265 | unsigned int cmd, unsigned long arg) |
2266 | { | |
95da310e | 2267 | struct usb_serial_port *port = tty->driver_data; |
97c4965d | 2268 | void __user *argp = (void __user *)arg; |
3f542974 | 2269 | struct moschip_port *mos7840_port; |
3f542974 PS |
2270 | |
2271 | struct async_icount cnow; | |
2272 | struct async_icount cprev; | |
2273 | struct serial_icounter_struct icount; | |
2274 | int mosret = 0; | |
3f542974 | 2275 | |
441b62c1 | 2276 | if (mos7840_port_paranoia_check(port, __func__)) { |
3f542974 PS |
2277 | dbg("%s", "Invalid port \n"); |
2278 | return -1; | |
2279 | } | |
2280 | ||
2281 | mos7840_port = mos7840_get_port_private(port); | |
3f542974 PS |
2282 | |
2283 | if (mos7840_port == NULL) | |
2284 | return -1; | |
2285 | ||
441b62c1 | 2286 | dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); |
3f542974 PS |
2287 | |
2288 | switch (cmd) { | |
2289 | /* return number of bytes available */ | |
2290 | ||
3f542974 | 2291 | case TIOCSERGETLSR: |
441b62c1 | 2292 | dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); |
95da310e | 2293 | return mos7840_get_lsr_info(tty, argp); |
3f542974 PS |
2294 | return 0; |
2295 | ||
95da310e | 2296 | /* FIXME: use the modem hooks and remove this */ |
3f542974 PS |
2297 | case TIOCMBIS: |
2298 | case TIOCMBIC: | |
2299 | case TIOCMSET: | |
441b62c1 | 2300 | dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__, |
3f542974 PS |
2301 | port->number); |
2302 | mosret = | |
97c4965d | 2303 | mos7840_set_modem_info(mos7840_port, cmd, argp); |
3f542974 PS |
2304 | return mosret; |
2305 | ||
2306 | case TIOCMGET: | |
441b62c1 | 2307 | dbg("%s (%d) TIOCMGET", __func__, port->number); |
97c4965d | 2308 | return mos7840_get_modem_info(mos7840_port, argp); |
3f542974 PS |
2309 | |
2310 | case TIOCGSERIAL: | |
441b62c1 | 2311 | dbg("%s (%d) TIOCGSERIAL", __func__, port->number); |
97c4965d | 2312 | return mos7840_get_serial_info(mos7840_port, argp); |
3f542974 PS |
2313 | |
2314 | case TIOCSSERIAL: | |
441b62c1 | 2315 | dbg("%s (%d) TIOCSSERIAL", __func__, port->number); |
3f542974 PS |
2316 | break; |
2317 | ||
2318 | case TIOCMIWAIT: | |
441b62c1 | 2319 | dbg("%s (%d) TIOCMIWAIT", __func__, port->number); |
3f542974 PS |
2320 | cprev = mos7840_port->icount; |
2321 | while (1) { | |
880af9db | 2322 | /* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */ |
3f542974 PS |
2323 | mos7840_port->delta_msr_cond = 0; |
2324 | wait_event_interruptible(mos7840_port->delta_msr_wait, | |
2325 | (mos7840_port-> | |
2326 | delta_msr_cond == 1)); | |
2327 | ||
2328 | /* see if a signal did it */ | |
2329 | if (signal_pending(current)) | |
2330 | return -ERESTARTSYS; | |
2331 | cnow = mos7840_port->icount; | |
0de9a702 | 2332 | smp_rmb(); |
3f542974 PS |
2333 | if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && |
2334 | cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) | |
2335 | return -EIO; /* no change => error */ | |
2336 | if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || | |
2337 | ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || | |
2338 | ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || | |
2339 | ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { | |
2340 | return 0; | |
2341 | } | |
2342 | cprev = cnow; | |
2343 | } | |
2344 | /* NOTREACHED */ | |
2345 | break; | |
2346 | ||
2347 | case TIOCGICOUNT: | |
2348 | cnow = mos7840_port->icount; | |
0de9a702 | 2349 | smp_rmb(); |
3f542974 PS |
2350 | icount.cts = cnow.cts; |
2351 | icount.dsr = cnow.dsr; | |
2352 | icount.rng = cnow.rng; | |
2353 | icount.dcd = cnow.dcd; | |
2354 | icount.rx = cnow.rx; | |
2355 | icount.tx = cnow.tx; | |
2356 | icount.frame = cnow.frame; | |
2357 | icount.overrun = cnow.overrun; | |
2358 | icount.parity = cnow.parity; | |
2359 | icount.brk = cnow.brk; | |
2360 | icount.buf_overrun = cnow.buf_overrun; | |
2361 | ||
441b62c1 | 2362 | dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, |
3f542974 | 2363 | port->number, icount.rx, icount.tx); |
97c4965d | 2364 | if (copy_to_user(argp, &icount, sizeof(icount))) |
3f542974 PS |
2365 | return -EFAULT; |
2366 | return 0; | |
3f542974 PS |
2367 | default: |
2368 | break; | |
2369 | } | |
3f542974 PS |
2370 | return -ENOIOCTLCMD; |
2371 | } | |
2372 | ||
2373 | static int mos7840_calc_num_ports(struct usb_serial *serial) | |
2374 | { | |
0de9a702 | 2375 | int mos7840_num_ports = 0; |
3f542974 PS |
2376 | |
2377 | dbg("numberofendpoints: %d \n", | |
2378 | (int)serial->interface->cur_altsetting->desc.bNumEndpoints); | |
2379 | dbg("numberofendpoints: %d \n", | |
2380 | (int)serial->interface->altsetting->desc.bNumEndpoints); | |
2381 | if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) { | |
0de9a702 | 2382 | mos7840_num_ports = serial->num_ports = 2; |
3f542974 | 2383 | } else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) { |
0de9a702 ON |
2384 | serial->num_bulk_in = 4; |
2385 | serial->num_bulk_out = 4; | |
2386 | mos7840_num_ports = serial->num_ports = 4; | |
3f542974 PS |
2387 | } |
2388 | ||
2389 | return mos7840_num_ports; | |
2390 | } | |
2391 | ||
2392 | /**************************************************************************** | |
2393 | * mos7840_startup | |
2394 | ****************************************************************************/ | |
2395 | ||
2396 | static int mos7840_startup(struct usb_serial *serial) | |
2397 | { | |
2398 | struct moschip_port *mos7840_port; | |
2399 | struct usb_device *dev; | |
2400 | int i, status; | |
2401 | ||
2402 | __u16 Data; | |
2403 | dbg("%s \n", " mos7840_startup :entering.........."); | |
2404 | ||
2405 | if (!serial) { | |
2406 | dbg("%s\n", "Invalid Handler"); | |
2407 | return -1; | |
2408 | } | |
2409 | ||
2410 | dev = serial->dev; | |
2411 | ||
2412 | dbg("%s\n", "Entering..."); | |
2413 | ||
2414 | /* we set up the pointers to the endpoints in the mos7840_open * | |
2415 | * function, as the structures aren't created yet. */ | |
2416 | ||
2417 | /* set up port private structures */ | |
2418 | for (i = 0; i < serial->num_ports; ++i) { | |
7ac9da10 | 2419 | mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); |
3f542974 | 2420 | if (mos7840_port == NULL) { |
194343d9 | 2421 | dev_err(&dev->dev, "%s - Out of memory\n", __func__); |
0de9a702 ON |
2422 | status = -ENOMEM; |
2423 | i--; /* don't follow NULL pointer cleaning up */ | |
2424 | goto error; | |
3f542974 | 2425 | } |
3f542974 | 2426 | |
880af9db AC |
2427 | /* Initialize all port interrupt end point to port 0 int |
2428 | * endpoint. Our device has only one interrupt end point | |
2429 | * common to all port */ | |
3f542974 PS |
2430 | |
2431 | mos7840_port->port = serial->port[i]; | |
2432 | mos7840_set_port_private(serial->port[i], mos7840_port); | |
0de9a702 | 2433 | spin_lock_init(&mos7840_port->pool_lock); |
3f542974 | 2434 | |
37768adf TC |
2435 | /* minor is not initialised until later by |
2436 | * usb-serial.c:get_free_serial() and cannot therefore be used | |
2437 | * to index device instances */ | |
2438 | mos7840_port->port_num = i + 1; | |
2439 | dbg ("serial->port[i]->number = %d", serial->port[i]->number); | |
2440 | dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor); | |
2441 | dbg ("mos7840_port->port_num = %d", mos7840_port->port_num); | |
2442 | dbg ("serial->minor = %d", serial->minor); | |
3f542974 PS |
2443 | |
2444 | if (mos7840_port->port_num == 1) { | |
2445 | mos7840_port->SpRegOffset = 0x0; | |
2446 | mos7840_port->ControlRegOffset = 0x1; | |
2447 | mos7840_port->DcrRegOffset = 0x4; | |
2448 | } else if ((mos7840_port->port_num == 2) | |
0de9a702 | 2449 | && (serial->num_ports == 4)) { |
3f542974 PS |
2450 | mos7840_port->SpRegOffset = 0x8; |
2451 | mos7840_port->ControlRegOffset = 0x9; | |
2452 | mos7840_port->DcrRegOffset = 0x16; | |
2453 | } else if ((mos7840_port->port_num == 2) | |
0de9a702 | 2454 | && (serial->num_ports == 2)) { |
3f542974 PS |
2455 | mos7840_port->SpRegOffset = 0xa; |
2456 | mos7840_port->ControlRegOffset = 0xb; | |
2457 | mos7840_port->DcrRegOffset = 0x19; | |
2458 | } else if ((mos7840_port->port_num == 3) | |
0de9a702 | 2459 | && (serial->num_ports == 4)) { |
3f542974 PS |
2460 | mos7840_port->SpRegOffset = 0xa; |
2461 | mos7840_port->ControlRegOffset = 0xb; | |
2462 | mos7840_port->DcrRegOffset = 0x19; | |
2463 | } else if ((mos7840_port->port_num == 4) | |
0de9a702 | 2464 | && (serial->num_ports == 4)) { |
3f542974 PS |
2465 | mos7840_port->SpRegOffset = 0xc; |
2466 | mos7840_port->ControlRegOffset = 0xd; | |
2467 | mos7840_port->DcrRegOffset = 0x1c; | |
2468 | } | |
2469 | mos7840_dump_serial_port(mos7840_port); | |
3f542974 PS |
2470 | mos7840_set_port_private(serial->port[i], mos7840_port); |
2471 | ||
880af9db AC |
2472 | /* enable rx_disable bit in control register */ |
2473 | status = mos7840_get_reg_sync(serial->port[i], | |
2474 | mos7840_port->ControlRegOffset, &Data); | |
3f542974 PS |
2475 | if (status < 0) { |
2476 | dbg("Reading ControlReg failed status-0x%x\n", status); | |
2477 | break; | |
2478 | } else | |
2479 | dbg("ControlReg Reading success val is %x, status%d\n", | |
2480 | Data, status); | |
880af9db AC |
2481 | Data |= 0x08; /* setting driver done bit */ |
2482 | Data |= 0x04; /* sp1_bit to have cts change reflect in | |
2483 | modem status reg */ | |
3f542974 | 2484 | |
880af9db AC |
2485 | /* Data |= 0x20; //rx_disable bit */ |
2486 | status = mos7840_set_reg_sync(serial->port[i], | |
3f542974 PS |
2487 | mos7840_port->ControlRegOffset, Data); |
2488 | if (status < 0) { | |
2489 | dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status); | |
2490 | break; | |
2491 | } else | |
2492 | dbg("ControlReg Writing success(rx_disable) status%d\n", | |
2493 | status); | |
2494 | ||
880af9db AC |
2495 | /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 |
2496 | and 0x24 in DCR3 */ | |
3f542974 | 2497 | Data = 0x01; |
880af9db AC |
2498 | status = mos7840_set_reg_sync(serial->port[i], |
2499 | (__u16) (mos7840_port->DcrRegOffset + 0), Data); | |
3f542974 PS |
2500 | if (status < 0) { |
2501 | dbg("Writing DCR0 failed status-0x%x\n", status); | |
2502 | break; | |
2503 | } else | |
2504 | dbg("DCR0 Writing success status%d\n", status); | |
2505 | ||
2506 | Data = 0x05; | |
880af9db AC |
2507 | status = mos7840_set_reg_sync(serial->port[i], |
2508 | (__u16) (mos7840_port->DcrRegOffset + 1), Data); | |
3f542974 PS |
2509 | if (status < 0) { |
2510 | dbg("Writing DCR1 failed status-0x%x\n", status); | |
2511 | break; | |
2512 | } else | |
2513 | dbg("DCR1 Writing success status%d\n", status); | |
2514 | ||
2515 | Data = 0x24; | |
880af9db AC |
2516 | status = mos7840_set_reg_sync(serial->port[i], |
2517 | (__u16) (mos7840_port->DcrRegOffset + 2), Data); | |
3f542974 PS |
2518 | if (status < 0) { |
2519 | dbg("Writing DCR2 failed status-0x%x\n", status); | |
2520 | break; | |
2521 | } else | |
2522 | dbg("DCR2 Writing success status%d\n", status); | |
2523 | ||
880af9db | 2524 | /* write values in clkstart0x0 and clkmulti 0x20 */ |
3f542974 | 2525 | Data = 0x0; |
880af9db | 2526 | status = mos7840_set_reg_sync(serial->port[i], |
3f542974 PS |
2527 | CLK_START_VALUE_REGISTER, Data); |
2528 | if (status < 0) { | |
2529 | dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); | |
2530 | break; | |
2531 | } else | |
2532 | dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status); | |
2533 | ||
2534 | Data = 0x20; | |
880af9db AC |
2535 | status = mos7840_set_reg_sync(serial->port[i], |
2536 | CLK_MULTI_REGISTER, Data); | |
3f542974 PS |
2537 | if (status < 0) { |
2538 | dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n", | |
2539 | status); | |
0de9a702 | 2540 | goto error; |
3f542974 PS |
2541 | } else |
2542 | dbg("CLK_MULTI_REGISTER Writing success status%d\n", | |
2543 | status); | |
2544 | ||
880af9db | 2545 | /* write value 0x0 to scratchpad register */ |
3f542974 | 2546 | Data = 0x00; |
880af9db AC |
2547 | status = mos7840_set_uart_reg(serial->port[i], |
2548 | SCRATCH_PAD_REGISTER, Data); | |
3f542974 PS |
2549 | if (status < 0) { |
2550 | dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", | |
2551 | status); | |
2552 | break; | |
2553 | } else | |
2554 | dbg("SCRATCH_PAD_REGISTER Writing success status%d\n", | |
2555 | status); | |
2556 | ||
880af9db | 2557 | /* Zero Length flag register */ |
3f542974 | 2558 | if ((mos7840_port->port_num != 1) |
0de9a702 | 2559 | && (serial->num_ports == 2)) { |
3f542974 PS |
2560 | |
2561 | Data = 0xff; | |
3f542974 | 2562 | status = mos7840_set_reg_sync(serial->port[i], |
880af9db AC |
2563 | (__u16) (ZLP_REG1 + |
2564 | ((__u16)mos7840_port->port_num)), Data); | |
3f542974 PS |
2565 | dbg("ZLIP offset%x\n", |
2566 | (__u16) (ZLP_REG1 + | |
880af9db | 2567 | ((__u16) mos7840_port->port_num))); |
3f542974 PS |
2568 | if (status < 0) { |
2569 | dbg("Writing ZLP_REG%d failed status-0x%x\n", | |
2570 | i + 2, status); | |
2571 | break; | |
2572 | } else | |
2573 | dbg("ZLP_REG%d Writing success status%d\n", | |
2574 | i + 2, status); | |
2575 | } else { | |
2576 | Data = 0xff; | |
3f542974 | 2577 | status = mos7840_set_reg_sync(serial->port[i], |
880af9db AC |
2578 | (__u16) (ZLP_REG1 + |
2579 | ((__u16)mos7840_port->port_num) - 0x1), Data); | |
3f542974 PS |
2580 | dbg("ZLIP offset%x\n", |
2581 | (__u16) (ZLP_REG1 + | |
2582 | ((__u16) mos7840_port->port_num) - 0x1)); | |
2583 | if (status < 0) { | |
2584 | dbg("Writing ZLP_REG%d failed status-0x%x\n", | |
2585 | i + 1, status); | |
2586 | break; | |
2587 | } else | |
2588 | dbg("ZLP_REG%d Writing success status%d\n", | |
2589 | i + 1, status); | |
2590 | ||
2591 | } | |
0de9a702 | 2592 | mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); |
3f542974 | 2593 | mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); |
880af9db AC |
2594 | mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), |
2595 | GFP_KERNEL); | |
2596 | if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || | |
2597 | !mos7840_port->dr) { | |
0de9a702 ON |
2598 | status = -ENOMEM; |
2599 | goto error; | |
2600 | } | |
3f542974 PS |
2601 | } |
2602 | ||
880af9db | 2603 | /* Zero Length flag enable */ |
3f542974 | 2604 | Data = 0x0f; |
3f542974 PS |
2605 | status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); |
2606 | if (status < 0) { | |
2607 | dbg("Writing ZLP_REG5 failed status-0x%x\n", status); | |
7ced46c3 | 2608 | goto error; |
3f542974 PS |
2609 | } else |
2610 | dbg("ZLP_REG5 Writing success status%d\n", status); | |
2611 | ||
2612 | /* setting configuration feature to one */ | |
2613 | usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
97c4965d | 2614 | (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ); |
3f542974 | 2615 | return 0; |
0de9a702 ON |
2616 | error: |
2617 | for (/* nothing */; i >= 0; i--) { | |
2618 | mos7840_port = mos7840_get_port_private(serial->port[i]); | |
2619 | ||
2620 | kfree(mos7840_port->dr); | |
2621 | kfree(mos7840_port->ctrl_buf); | |
2622 | usb_free_urb(mos7840_port->control_urb); | |
2623 | kfree(mos7840_port); | |
2624 | serial->port[i] = NULL; | |
2625 | } | |
2626 | return status; | |
3f542974 PS |
2627 | } |
2628 | ||
2629 | /**************************************************************************** | |
2630 | * mos7840_shutdown | |
2631 | * This function is called whenever the device is removed from the usb bus. | |
2632 | ****************************************************************************/ | |
2633 | ||
2634 | static void mos7840_shutdown(struct usb_serial *serial) | |
2635 | { | |
2636 | int i; | |
0de9a702 | 2637 | unsigned long flags; |
3f542974 PS |
2638 | struct moschip_port *mos7840_port; |
2639 | dbg("%s \n", " shutdown :entering.........."); | |
2640 | ||
2641 | if (!serial) { | |
2642 | dbg("%s", "Invalid Handler \n"); | |
2643 | return; | |
2644 | } | |
2645 | ||
880af9db | 2646 | /* check for the ports to be closed,close the ports and disconnect */ |
3f542974 PS |
2647 | |
2648 | /* free private structure allocated for serial port * | |
2649 | * stop reads and writes on all ports */ | |
2650 | ||
2651 | for (i = 0; i < serial->num_ports; ++i) { | |
2652 | mos7840_port = mos7840_get_port_private(serial->port[i]); | |
37768adf TC |
2653 | dbg ("mos7840_port %d = %p", i, mos7840_port); |
2654 | if (mos7840_port) { | |
2655 | spin_lock_irqsave(&mos7840_port->pool_lock, flags); | |
2656 | mos7840_port->zombie = 1; | |
2657 | spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); | |
2658 | usb_kill_urb(mos7840_port->control_urb); | |
2659 | kfree(mos7840_port->ctrl_buf); | |
2660 | kfree(mos7840_port->dr); | |
2661 | kfree(mos7840_port); | |
2662 | } | |
3f542974 PS |
2663 | mos7840_set_port_private(serial->port[i], NULL); |
2664 | } | |
2665 | ||
2666 | dbg("%s\n", "Thank u :: "); | |
2667 | ||
2668 | } | |
2669 | ||
d9b1b787 JH |
2670 | static struct usb_driver io_driver = { |
2671 | .name = "mos7840", | |
2672 | .probe = usb_serial_probe, | |
2673 | .disconnect = usb_serial_disconnect, | |
2674 | .id_table = moschip_id_table_combined, | |
2675 | .no_dynamic_id = 1, | |
2676 | }; | |
2677 | ||
3f542974 PS |
2678 | static struct usb_serial_driver moschip7840_4port_device = { |
2679 | .driver = { | |
2680 | .owner = THIS_MODULE, | |
2681 | .name = "mos7840", | |
2682 | }, | |
2683 | .description = DRIVER_DESC, | |
d9b1b787 | 2684 | .usb_driver = &io_driver, |
3f542974 | 2685 | .id_table = moschip_port_id_table, |
3f542974 | 2686 | .num_ports = 4, |
3f542974 PS |
2687 | .open = mos7840_open, |
2688 | .close = mos7840_close, | |
2689 | .write = mos7840_write, | |
2690 | .write_room = mos7840_write_room, | |
2691 | .chars_in_buffer = mos7840_chars_in_buffer, | |
2692 | .throttle = mos7840_throttle, | |
2693 | .unthrottle = mos7840_unthrottle, | |
2694 | .calc_num_ports = mos7840_calc_num_ports, | |
2695 | #ifdef MCSSerialProbe | |
2696 | .probe = mos7840_serial_probe, | |
2697 | #endif | |
2698 | .ioctl = mos7840_ioctl, | |
2699 | .set_termios = mos7840_set_termios, | |
2700 | .break_ctl = mos7840_break, | |
2701 | .tiocmget = mos7840_tiocmget, | |
2702 | .tiocmset = mos7840_tiocmset, | |
2703 | .attach = mos7840_startup, | |
2704 | .shutdown = mos7840_shutdown, | |
2705 | .read_bulk_callback = mos7840_bulk_in_callback, | |
2706 | .read_int_callback = mos7840_interrupt_callback, | |
2707 | }; | |
2708 | ||
3f542974 PS |
2709 | /**************************************************************************** |
2710 | * moschip7840_init | |
2711 | * This is called by the module subsystem, or on startup to initialize us | |
2712 | ****************************************************************************/ | |
2713 | static int __init moschip7840_init(void) | |
2714 | { | |
2715 | int retval; | |
2716 | ||
2717 | dbg("%s \n", " mos7840_init :entering.........."); | |
2718 | ||
2719 | /* Register with the usb serial */ | |
2720 | retval = usb_serial_register(&moschip7840_4port_device); | |
2721 | ||
2722 | if (retval) | |
2723 | goto failed_port_device_register; | |
2724 | ||
2725 | dbg("%s\n", "Entring..."); | |
c197a8db GKH |
2726 | printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" |
2727 | DRIVER_DESC "\n"); | |
3f542974 PS |
2728 | |
2729 | /* Register with the usb */ | |
2730 | retval = usb_register(&io_driver); | |
3f542974 PS |
2731 | if (retval == 0) { |
2732 | dbg("%s\n", "Leaving..."); | |
2733 | return 0; | |
2734 | } | |
3f542974 | 2735 | usb_serial_deregister(&moschip7840_4port_device); |
880af9db | 2736 | failed_port_device_register: |
3f542974 PS |
2737 | return retval; |
2738 | } | |
2739 | ||
2740 | /**************************************************************************** | |
2741 | * moschip7840_exit | |
2742 | * Called when the driver is about to be unloaded. | |
2743 | ****************************************************************************/ | |
2744 | static void __exit moschip7840_exit(void) | |
2745 | { | |
2746 | ||
2747 | dbg("%s \n", " mos7840_exit :entering.........."); | |
2748 | ||
2749 | usb_deregister(&io_driver); | |
2750 | ||
2751 | usb_serial_deregister(&moschip7840_4port_device); | |
2752 | ||
2753 | dbg("%s\n", "Entring..."); | |
2754 | } | |
2755 | ||
2756 | module_init(moschip7840_init); | |
2757 | module_exit(moschip7840_exit); | |
2758 | ||
2759 | /* Module information */ | |
2760 | MODULE_DESCRIPTION(DRIVER_DESC); | |
2761 | MODULE_LICENSE("GPL"); | |
2762 | ||
2763 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
2764 | MODULE_PARM_DESC(debug, "Debug enabled or not"); |