Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Edgeport USB Serial Converter driver | |
3 | * | |
4 | * Copyright (C) 2000 Inside Out Networks, All rights reserved. | |
5 | * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * Supports the following devices: | |
13 | * Edgeport/4 | |
14 | * Edgeport/4t | |
15 | * Edgeport/2 | |
16 | * Edgeport/4i | |
17 | * Edgeport/2i | |
18 | * Edgeport/421 | |
19 | * Edgeport/21 | |
20 | * Rapidport/4 | |
21 | * Edgeport/8 | |
22 | * Edgeport/2D8 | |
23 | * Edgeport/4D8 | |
24 | * Edgeport/8i | |
25 | * | |
26 | * For questions or problems with this driver, contact Inside Out | |
27 | * Networks technical support, or Peter Berger <pberger@brimson.com>, | |
28 | * or Al Borchers <alborchers@steinerpoint.com>. | |
29 | * | |
1da177e4 LT |
30 | */ |
31 | ||
1da177e4 LT |
32 | #include <linux/kernel.h> |
33 | #include <linux/jiffies.h> | |
34 | #include <linux/errno.h> | |
35 | #include <linux/init.h> | |
36 | #include <linux/slab.h> | |
37 | #include <linux/tty.h> | |
38 | #include <linux/tty_driver.h> | |
39 | #include <linux/tty_flip.h> | |
40 | #include <linux/module.h> | |
41 | #include <linux/spinlock.h> | |
42 | #include <linux/serial.h> | |
43 | #include <linux/ioctl.h> | |
44 | #include <linux/wait.h> | |
5b9ea932 JS |
45 | #include <linux/firmware.h> |
46 | #include <linux/ihex.h> | |
03f0dbf7 | 47 | #include <linux/uaccess.h> |
1da177e4 | 48 | #include <linux/usb.h> |
a969888c | 49 | #include <linux/usb/serial.h> |
1da177e4 LT |
50 | #include "io_edgeport.h" |
51 | #include "io_ionsp.h" /* info for the iosp messages */ | |
52 | #include "io_16654.h" /* 16654 UART defines */ | |
53 | ||
1da177e4 LT |
54 | #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli" |
55 | #define DRIVER_DESC "Edgeport USB Serial Driver" | |
56 | ||
1da177e4 LT |
57 | #define MAX_NAME_LEN 64 |
58 | ||
59 | #define CHASE_TIMEOUT (5*HZ) /* 5 seconds */ | |
60 | #define OPEN_TIMEOUT (5*HZ) /* 5 seconds */ | |
61 | #define COMMAND_TIMEOUT (5*HZ) /* 5 seconds */ | |
62 | ||
63 | /* receive port state */ | |
64 | enum RXSTATE { | |
03f0dbf7 AC |
65 | EXPECT_HDR1 = 0, /* Expect header byte 1 */ |
66 | EXPECT_HDR2 = 1, /* Expect header byte 2 */ | |
67 | EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */ | |
68 | EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */ | |
1da177e4 LT |
69 | }; |
70 | ||
71 | ||
03f0dbf7 AC |
72 | /* Transmit Fifo |
73 | * This Transmit queue is an extension of the edgeport Rx buffer. | |
74 | * The maximum amount of data buffered in both the edgeport | |
1da177e4 LT |
75 | * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits. |
76 | */ | |
77 | struct TxFifo { | |
78 | unsigned int head; /* index to head pointer (write) */ | |
79 | unsigned int tail; /* index to tail pointer (read) */ | |
80 | unsigned int count; /* Bytes in queue */ | |
81 | unsigned int size; /* Max size of queue (equal to Max number of TxCredits) */ | |
82 | unsigned char *fifo; /* allocated Buffer */ | |
83 | }; | |
84 | ||
85 | /* This structure holds all of the local port information */ | |
86 | struct edgeport_port { | |
87 | __u16 txCredits; /* our current credits for this port */ | |
88 | __u16 maxTxCredits; /* the max size of the port */ | |
89 | ||
90 | struct TxFifo txfifo; /* transmit fifo -- size will be maxTxCredits */ | |
91 | struct urb *write_urb; /* write URB for this port */ | |
cb8eaa8b | 92 | bool write_in_progress; /* 'true' while a write URB is outstanding */ |
1da177e4 LT |
93 | spinlock_t ep_lock; |
94 | ||
95 | __u8 shadowLCR; /* last LCR value received */ | |
96 | __u8 shadowMCR; /* last MCR value received */ | |
97 | __u8 shadowMSR; /* last MSR value received */ | |
98 | __u8 shadowLSR; /* last LSR value received */ | |
99 | __u8 shadowXonChar; /* last value set as XON char in Edgeport */ | |
100 | __u8 shadowXoffChar; /* last value set as XOFF char in Edgeport */ | |
101 | __u8 validDataMask; | |
102 | __u32 baudRate; | |
103 | ||
cb8eaa8b RK |
104 | bool open; |
105 | bool openPending; | |
106 | bool commandPending; | |
107 | bool closePending; | |
108 | bool chaseResponsePending; | |
1da177e4 LT |
109 | |
110 | wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ | |
111 | wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */ | |
112 | wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */ | |
1da177e4 | 113 | |
1da177e4 LT |
114 | struct usb_serial_port *port; /* loop back to the owner of this object */ |
115 | }; | |
116 | ||
117 | ||
118 | /* This structure holds all of the individual device information */ | |
119 | struct edgeport_serial { | |
ad93375a | 120 | char name[MAX_NAME_LEN+2]; /* string name of this device */ |
1da177e4 LT |
121 | |
122 | struct edge_manuf_descriptor manuf_descriptor; /* the manufacturer descriptor */ | |
123 | struct edge_boot_descriptor boot_descriptor; /* the boot firmware descriptor */ | |
124 | struct edgeport_product_info product_info; /* Product Info */ | |
6e8cf775 GKH |
125 | struct edge_compatibility_descriptor epic_descriptor; /* Edgeport compatible descriptor */ |
126 | int is_epic; /* flag if EPiC device or not */ | |
1da177e4 LT |
127 | |
128 | __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */ | |
03f0dbf7 AC |
129 | unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */ |
130 | struct urb *interrupt_read_urb; /* our interrupt urb */ | |
1da177e4 LT |
131 | |
132 | __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ | |
03f0dbf7 AC |
133 | unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ |
134 | struct urb *read_urb; /* our bulk read urb */ | |
cb8eaa8b | 135 | bool read_in_progress; |
1da177e4 LT |
136 | spinlock_t es_lock; |
137 | ||
138 | __u8 bulk_out_endpoint; /* the bulk out endpoint handle */ | |
139 | ||
140 | __s16 rxBytesAvail; /* the number of bytes that we need to read from this device */ | |
141 | ||
142 | enum RXSTATE rxState; /* the current state of the bulk receive processor */ | |
143 | __u8 rxHeader1; /* receive header byte 1 */ | |
144 | __u8 rxHeader2; /* receive header byte 2 */ | |
145 | __u8 rxHeader3; /* receive header byte 3 */ | |
146 | __u8 rxPort; /* the port that we are currently receiving data for */ | |
147 | __u8 rxStatusCode; /* the receive status code */ | |
148 | __u8 rxStatusParam; /* the receive status paramater */ | |
149 | __s16 rxBytesRemaining; /* the number of port bytes left to read */ | |
150 | struct usb_serial *serial; /* loop back to the owner of this object */ | |
151 | }; | |
152 | ||
153 | /* baud rate information */ | |
154 | struct divisor_table_entry { | |
155 | __u32 BaudRate; | |
156 | __u16 Divisor; | |
157 | }; | |
158 | ||
03f0dbf7 AC |
159 | /* |
160 | * Define table of divisors for Rev A EdgePort/4 hardware | |
161 | * These assume a 3.6864MHz crystal, the standard /16, and | |
162 | * MCR.7 = 0. | |
163 | */ | |
164 | ||
4c4c9432 | 165 | static const struct divisor_table_entry divisor_table[] = { |
03f0dbf7 AC |
166 | { 50, 4608}, |
167 | { 75, 3072}, | |
168 | { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ | |
169 | { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */ | |
1da177e4 LT |
170 | { 150, 1536}, |
171 | { 300, 768}, | |
172 | { 600, 384}, | |
173 | { 1200, 192}, | |
174 | { 1800, 128}, | |
175 | { 2400, 96}, | |
176 | { 4800, 48}, | |
177 | { 7200, 32}, | |
178 | { 9600, 24}, | |
179 | { 14400, 16}, | |
180 | { 19200, 12}, | |
181 | { 38400, 6}, | |
182 | { 57600, 4}, | |
183 | { 115200, 2}, | |
184 | { 230400, 1}, | |
185 | }; | |
186 | ||
36ccce49 GKH |
187 | /* Number of outstanding Command Write Urbs */ |
188 | static atomic_t CmdUrbs = ATOMIC_INIT(0); | |
1da177e4 LT |
189 | |
190 | ||
191 | /* local function prototypes */ | |
192 | ||
193 | /* function prototypes for all URB callbacks */ | |
03f0dbf7 AC |
194 | static void edge_interrupt_callback(struct urb *urb); |
195 | static void edge_bulk_in_callback(struct urb *urb); | |
196 | static void edge_bulk_out_data_callback(struct urb *urb); | |
197 | static void edge_bulk_out_cmd_callback(struct urb *urb); | |
1da177e4 LT |
198 | |
199 | /* function prototypes for the usbserial callbacks */ | |
a509a7e4 | 200 | static int edge_open(struct tty_struct *tty, struct usb_serial_port *port); |
335f8514 | 201 | static void edge_close(struct usb_serial_port *port); |
03f0dbf7 AC |
202 | static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, |
203 | const unsigned char *buf, int count); | |
204 | static int edge_write_room(struct tty_struct *tty); | |
205 | static int edge_chars_in_buffer(struct tty_struct *tty); | |
206 | static void edge_throttle(struct tty_struct *tty); | |
207 | static void edge_unthrottle(struct tty_struct *tty); | |
208 | static void edge_set_termios(struct tty_struct *tty, | |
209 | struct usb_serial_port *port, | |
210 | struct ktermios *old_termios); | |
00a0d0d6 | 211 | static int edge_ioctl(struct tty_struct *tty, |
03f0dbf7 AC |
212 | unsigned int cmd, unsigned long arg); |
213 | static void edge_break(struct tty_struct *tty, int break_state); | |
60b33c13 | 214 | static int edge_tiocmget(struct tty_struct *tty); |
20b9d177 | 215 | static int edge_tiocmset(struct tty_struct *tty, |
03f0dbf7 AC |
216 | unsigned int set, unsigned int clear); |
217 | static int edge_startup(struct usb_serial *serial); | |
f9c99bb8 AS |
218 | static void edge_disconnect(struct usb_serial *serial); |
219 | static void edge_release(struct usb_serial *serial); | |
c27f3efc JH |
220 | static int edge_port_probe(struct usb_serial_port *port); |
221 | static int edge_port_remove(struct usb_serial_port *port); | |
1da177e4 LT |
222 | |
223 | #include "io_tables.h" /* all of the devices that this driver supports */ | |
224 | ||
1da177e4 | 225 | /* function prototypes for all of our local functions */ |
03f0dbf7 AC |
226 | |
227 | static void process_rcvd_data(struct edgeport_serial *edge_serial, | |
228 | unsigned char *buffer, __u16 bufferLength); | |
229 | static void process_rcvd_status(struct edgeport_serial *edge_serial, | |
230 | __u8 byte2, __u8 byte3); | |
2e124b4a JS |
231 | static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, |
232 | int length); | |
03f0dbf7 AC |
233 | static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr); |
234 | static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, | |
235 | __u8 lsr, __u8 data); | |
236 | static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command, | |
237 | __u8 param); | |
984f6868 | 238 | static int calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor); |
03f0dbf7 AC |
239 | static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, |
240 | int baudRate); | |
241 | static void change_port_settings(struct tty_struct *tty, | |
242 | struct edgeport_port *edge_port, | |
243 | struct ktermios *old_termios); | |
244 | static int send_cmd_write_uart_register(struct edgeport_port *edge_port, | |
245 | __u8 regNum, __u8 regValue); | |
246 | static int write_cmd_usb(struct edgeport_port *edge_port, | |
247 | unsigned char *buffer, int writeLength); | |
248 | static void send_more_port_data(struct edgeport_serial *edge_serial, | |
249 | struct edgeport_port *edge_port); | |
250 | ||
251 | static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, | |
252 | __u16 length, const __u8 *data); | |
253 | static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr, | |
254 | __u16 length, __u8 *data); | |
255 | static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, | |
256 | __u16 length, const __u8 *data); | |
257 | static void get_manufacturing_desc(struct edgeport_serial *edge_serial); | |
258 | static void get_boot_desc(struct edgeport_serial *edge_serial); | |
259 | static void load_application_firmware(struct edgeport_serial *edge_serial); | |
260 | ||
261 | static void unicode_to_ascii(char *string, int buflen, | |
262 | __le16 *unicode, int unicode_size); | |
263 | ||
264 | ||
265 | /* ************************************************************************ */ | |
266 | /* ************************************************************************ */ | |
267 | /* ************************************************************************ */ | |
268 | /* ************************************************************************ */ | |
1da177e4 LT |
269 | |
270 | /************************************************************************ | |
271 | * * | |
272 | * update_edgeport_E2PROM() Compare current versions of * | |
273 | * Boot ROM and Manufacture * | |
274 | * Descriptors with versions * | |
275 | * embedded in this driver * | |
276 | * * | |
277 | ************************************************************************/ | |
03f0dbf7 | 278 | static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) |
1da177e4 | 279 | { |
984f6868 | 280 | struct device *dev = &edge_serial->serial->dev->dev; |
1da177e4 LT |
281 | __u32 BootCurVer; |
282 | __u32 BootNewVer; | |
5b9ea932 JS |
283 | __u8 BootMajorVersion; |
284 | __u8 BootMinorVersion; | |
285 | __u16 BootBuildNumber; | |
286 | __u32 Bootaddr; | |
287 | const struct ihex_binrec *rec; | |
288 | const struct firmware *fw; | |
289 | const char *fw_name; | |
1da177e4 LT |
290 | int response; |
291 | ||
1da177e4 | 292 | switch (edge_serial->product_info.iDownloadFile) { |
03f0dbf7 AC |
293 | case EDGE_DOWNLOAD_FILE_I930: |
294 | fw_name = "edgeport/boot.fw"; | |
295 | break; | |
296 | case EDGE_DOWNLOAD_FILE_80251: | |
297 | fw_name = "edgeport/boot2.fw"; | |
298 | break; | |
299 | default: | |
300 | return; | |
1da177e4 LT |
301 | } |
302 | ||
5b9ea932 JS |
303 | response = request_ihex_firmware(&fw, fw_name, |
304 | &edge_serial->serial->dev->dev); | |
305 | if (response) { | |
984f6868 | 306 | dev_err(dev, "Failed to load image \"%s\" err %d\n", |
5b9ea932 JS |
307 | fw_name, response); |
308 | return; | |
309 | } | |
310 | ||
311 | rec = (const struct ihex_binrec *)fw->data; | |
312 | BootMajorVersion = rec->data[0]; | |
313 | BootMinorVersion = rec->data[1]; | |
314 | BootBuildNumber = (rec->data[2] << 8) | rec->data[3]; | |
315 | ||
03f0dbf7 | 316 | /* Check Boot Image Version */ |
1da177e4 LT |
317 | BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) + |
318 | (edge_serial->boot_descriptor.MinorVersion << 16) + | |
319 | le16_to_cpu(edge_serial->boot_descriptor.BuildNumber); | |
320 | ||
321 | BootNewVer = (BootMajorVersion << 24) + | |
322 | (BootMinorVersion << 16) + | |
5b9ea932 | 323 | BootBuildNumber; |
1da177e4 | 324 | |
984f6868 | 325 | dev_dbg(dev, "Current Boot Image version %d.%d.%d\n", |
1da177e4 LT |
326 | edge_serial->boot_descriptor.MajorVersion, |
327 | edge_serial->boot_descriptor.MinorVersion, | |
328 | le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); | |
329 | ||
330 | ||
331 | if (BootNewVer > BootCurVer) { | |
984f6868 | 332 | dev_dbg(dev, "**Update Boot Image from %d.%d.%d to %d.%d.%d\n", |
1da177e4 LT |
333 | edge_serial->boot_descriptor.MajorVersion, |
334 | edge_serial->boot_descriptor.MinorVersion, | |
335 | le16_to_cpu(edge_serial->boot_descriptor.BuildNumber), | |
5b9ea932 | 336 | BootMajorVersion, BootMinorVersion, BootBuildNumber); |
1da177e4 | 337 | |
984f6868 | 338 | dev_dbg(dev, "Downloading new Boot Image\n"); |
1da177e4 | 339 | |
5b9ea932 JS |
340 | for (rec = ihex_next_binrec(rec); rec; |
341 | rec = ihex_next_binrec(rec)) { | |
342 | Bootaddr = be32_to_cpu(rec->addr); | |
343 | response = rom_write(edge_serial->serial, | |
344 | Bootaddr >> 16, | |
345 | Bootaddr & 0xFFFF, | |
346 | be16_to_cpu(rec->len), | |
347 | &rec->data[0]); | |
1da177e4 | 348 | if (response < 0) { |
5b9ea932 JS |
349 | dev_err(&edge_serial->serial->dev->dev, |
350 | "rom_write failed (%x, %x, %d)\n", | |
351 | Bootaddr >> 16, Bootaddr & 0xFFFF, | |
352 | be16_to_cpu(rec->len)); | |
1da177e4 LT |
353 | break; |
354 | } | |
355 | } | |
356 | } else { | |
984f6868 | 357 | dev_dbg(dev, "Boot Image -- already up to date\n"); |
1da177e4 | 358 | } |
5b9ea932 | 359 | release_firmware(fw); |
1da177e4 LT |
360 | } |
361 | ||
1da177e4 LT |
362 | #if 0 |
363 | /************************************************************************ | |
364 | * | |
365 | * Get string descriptor from device | |
366 | * | |
367 | ************************************************************************/ | |
03f0dbf7 AC |
368 | static int get_string_desc(struct usb_device *dev, int Id, |
369 | struct usb_string_descriptor **pRetDesc) | |
1da177e4 LT |
370 | { |
371 | struct usb_string_descriptor StringDesc; | |
372 | struct usb_string_descriptor *pStringDesc; | |
373 | ||
984f6868 | 374 | dev_dbg(&dev->dev, "%s - USB String ID = %d\n", __func__, Id); |
1da177e4 | 375 | |
03f0dbf7 AC |
376 | if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, |
377 | sizeof(StringDesc))) | |
1da177e4 | 378 | return 0; |
1da177e4 | 379 | |
03f0dbf7 AC |
380 | pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL); |
381 | if (!pStringDesc) | |
1da177e4 | 382 | return -1; |
1da177e4 | 383 | |
03f0dbf7 AC |
384 | if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, |
385 | StringDesc.bLength)) { | |
1da177e4 LT |
386 | kfree(pStringDesc); |
387 | return -1; | |
388 | } | |
389 | ||
390 | *pRetDesc = pStringDesc; | |
391 | return 0; | |
392 | } | |
393 | #endif | |
394 | ||
984f6868 GKH |
395 | static void dump_product_info(struct edgeport_serial *edge_serial, |
396 | struct edgeport_product_info *product_info) | |
6e8cf775 | 397 | { |
984f6868 GKH |
398 | struct device *dev = &edge_serial->serial->dev->dev; |
399 | ||
03f0dbf7 | 400 | /* Dump Product Info structure */ |
984f6868 GKH |
401 | dev_dbg(dev, "**Product Information:\n"); |
402 | dev_dbg(dev, " ProductId %x\n", product_info->ProductId); | |
403 | dev_dbg(dev, " NumPorts %d\n", product_info->NumPorts); | |
404 | dev_dbg(dev, " ProdInfoVer %d\n", product_info->ProdInfoVer); | |
405 | dev_dbg(dev, " IsServer %d\n", product_info->IsServer); | |
406 | dev_dbg(dev, " IsRS232 %d\n", product_info->IsRS232); | |
407 | dev_dbg(dev, " IsRS422 %d\n", product_info->IsRS422); | |
408 | dev_dbg(dev, " IsRS485 %d\n", product_info->IsRS485); | |
409 | dev_dbg(dev, " RomSize %d\n", product_info->RomSize); | |
410 | dev_dbg(dev, " RamSize %d\n", product_info->RamSize); | |
411 | dev_dbg(dev, " CpuRev %x\n", product_info->CpuRev); | |
412 | dev_dbg(dev, " BoardRev %x\n", product_info->BoardRev); | |
413 | dev_dbg(dev, " BootMajorVersion %d.%d.%d\n", | |
414 | product_info->BootMajorVersion, | |
415 | product_info->BootMinorVersion, | |
416 | le16_to_cpu(product_info->BootBuildNumber)); | |
417 | dev_dbg(dev, " FirmwareMajorVersion %d.%d.%d\n", | |
418 | product_info->FirmwareMajorVersion, | |
419 | product_info->FirmwareMinorVersion, | |
420 | le16_to_cpu(product_info->FirmwareBuildNumber)); | |
421 | dev_dbg(dev, " ManufactureDescDate %d/%d/%d\n", | |
422 | product_info->ManufactureDescDate[0], | |
423 | product_info->ManufactureDescDate[1], | |
424 | product_info->ManufactureDescDate[2]+1900); | |
425 | dev_dbg(dev, " iDownloadFile 0x%x\n", | |
426 | product_info->iDownloadFile); | |
427 | dev_dbg(dev, " EpicVer %d\n", product_info->EpicVer); | |
6e8cf775 GKH |
428 | } |
429 | ||
1da177e4 LT |
430 | static void get_product_info(struct edgeport_serial *edge_serial) |
431 | { | |
432 | struct edgeport_product_info *product_info = &edge_serial->product_info; | |
433 | ||
03f0dbf7 AC |
434 | memset(product_info, 0, sizeof(struct edgeport_product_info)); |
435 | ||
436 | product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP); | |
437 | product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts; | |
438 | product_info->ProdInfoVer = 0; | |
439 | ||
440 | product_info->RomSize = edge_serial->manuf_descriptor.RomSize; | |
441 | product_info->RamSize = edge_serial->manuf_descriptor.RamSize; | |
442 | product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev; | |
443 | product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev; | |
444 | ||
445 | product_info->BootMajorVersion = | |
446 | edge_serial->boot_descriptor.MajorVersion; | |
447 | product_info->BootMinorVersion = | |
448 | edge_serial->boot_descriptor.MinorVersion; | |
449 | product_info->BootBuildNumber = | |
450 | edge_serial->boot_descriptor.BuildNumber; | |
451 | ||
452 | memcpy(product_info->ManufactureDescDate, | |
453 | edge_serial->manuf_descriptor.DescDate, | |
454 | sizeof(edge_serial->manuf_descriptor.DescDate)); | |
455 | ||
456 | /* check if this is 2nd generation hardware */ | |
457 | if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) | |
458 | & ION_DEVICE_ID_80251_NETCHIP) | |
459 | product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; | |
460 | else | |
461 | product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; | |
984f6868 | 462 | |
03f0dbf7 | 463 | /* Determine Product type and set appropriate flags */ |
1da177e4 | 464 | switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) { |
03f0dbf7 AC |
465 | case ION_DEVICE_ID_EDGEPORT_COMPATIBLE: |
466 | case ION_DEVICE_ID_EDGEPORT_4T: | |
467 | case ION_DEVICE_ID_EDGEPORT_4: | |
468 | case ION_DEVICE_ID_EDGEPORT_2: | |
469 | case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU: | |
470 | case ION_DEVICE_ID_EDGEPORT_8: | |
471 | case ION_DEVICE_ID_EDGEPORT_421: | |
472 | case ION_DEVICE_ID_EDGEPORT_21: | |
473 | case ION_DEVICE_ID_EDGEPORT_2_DIN: | |
474 | case ION_DEVICE_ID_EDGEPORT_4_DIN: | |
475 | case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU: | |
476 | product_info->IsRS232 = 1; | |
477 | break; | |
1da177e4 | 478 | |
03f0dbf7 AC |
479 | case ION_DEVICE_ID_EDGEPORT_2I: /* Edgeport/2 RS422/RS485 */ |
480 | product_info->IsRS422 = 1; | |
481 | product_info->IsRS485 = 1; | |
482 | break; | |
1da177e4 | 483 | |
03f0dbf7 AC |
484 | case ION_DEVICE_ID_EDGEPORT_8I: /* Edgeport/4 RS422 */ |
485 | case ION_DEVICE_ID_EDGEPORT_4I: /* Edgeport/4 RS422 */ | |
486 | product_info->IsRS422 = 1; | |
487 | break; | |
1da177e4 LT |
488 | } |
489 | ||
984f6868 | 490 | dump_product_info(edge_serial, product_info); |
6e8cf775 | 491 | } |
1da177e4 | 492 | |
6e8cf775 GKH |
493 | static int get_epic_descriptor(struct edgeport_serial *ep) |
494 | { | |
495 | int result; | |
496 | struct usb_serial *serial = ep->serial; | |
497 | struct edgeport_product_info *product_info = &ep->product_info; | |
498 | struct edge_compatibility_descriptor *epic = &ep->epic_descriptor; | |
499 | struct edge_compatibility_bits *bits; | |
984f6868 | 500 | struct device *dev = &serial->dev->dev; |
6e8cf775 GKH |
501 | |
502 | ep->is_epic = 0; | |
503 | result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), | |
504 | USB_REQUEST_ION_GET_EPIC_DESC, | |
505 | 0xC0, 0x00, 0x00, | |
506 | &ep->epic_descriptor, | |
507 | sizeof(struct edge_compatibility_descriptor), | |
508 | 300); | |
509 | ||
6e8cf775 GKH |
510 | if (result > 0) { |
511 | ep->is_epic = 1; | |
512 | memset(product_info, 0, sizeof(struct edgeport_product_info)); | |
513 | ||
03f0dbf7 AC |
514 | product_info->NumPorts = epic->NumPorts; |
515 | product_info->ProdInfoVer = 0; | |
516 | product_info->FirmwareMajorVersion = epic->MajorVersion; | |
517 | product_info->FirmwareMinorVersion = epic->MinorVersion; | |
518 | product_info->FirmwareBuildNumber = epic->BuildNumber; | |
519 | product_info->iDownloadFile = epic->iDownloadFile; | |
520 | product_info->EpicVer = epic->EpicVer; | |
521 | product_info->Epic = epic->Supports; | |
522 | product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE; | |
984f6868 | 523 | dump_product_info(ep, product_info); |
6e8cf775 GKH |
524 | |
525 | bits = &ep->epic_descriptor.Supports; | |
984f6868 GKH |
526 | dev_dbg(dev, "**EPIC descriptor:\n"); |
527 | dev_dbg(dev, " VendEnableSuspend: %s\n", bits->VendEnableSuspend ? "TRUE": "FALSE"); | |
528 | dev_dbg(dev, " IOSPOpen : %s\n", bits->IOSPOpen ? "TRUE": "FALSE"); | |
529 | dev_dbg(dev, " IOSPClose : %s\n", bits->IOSPClose ? "TRUE": "FALSE"); | |
530 | dev_dbg(dev, " IOSPChase : %s\n", bits->IOSPChase ? "TRUE": "FALSE"); | |
531 | dev_dbg(dev, " IOSPSetRxFlow : %s\n", bits->IOSPSetRxFlow ? "TRUE": "FALSE"); | |
532 | dev_dbg(dev, " IOSPSetTxFlow : %s\n", bits->IOSPSetTxFlow ? "TRUE": "FALSE"); | |
533 | dev_dbg(dev, " IOSPSetXChar : %s\n", bits->IOSPSetXChar ? "TRUE": "FALSE"); | |
534 | dev_dbg(dev, " IOSPRxCheck : %s\n", bits->IOSPRxCheck ? "TRUE": "FALSE"); | |
535 | dev_dbg(dev, " IOSPSetClrBreak : %s\n", bits->IOSPSetClrBreak ? "TRUE": "FALSE"); | |
536 | dev_dbg(dev, " IOSPWriteMCR : %s\n", bits->IOSPWriteMCR ? "TRUE": "FALSE"); | |
537 | dev_dbg(dev, " IOSPWriteLCR : %s\n", bits->IOSPWriteLCR ? "TRUE": "FALSE"); | |
538 | dev_dbg(dev, " IOSPSetBaudRate : %s\n", bits->IOSPSetBaudRate ? "TRUE": "FALSE"); | |
539 | dev_dbg(dev, " TrueEdgeport : %s\n", bits->TrueEdgeport ? "TRUE": "FALSE"); | |
6e8cf775 GKH |
540 | } |
541 | ||
542 | return result; | |
1da177e4 LT |
543 | } |
544 | ||
545 | ||
546 | /************************************************************************/ | |
547 | /************************************************************************/ | |
548 | /* U S B C A L L B A C K F U N C T I O N S */ | |
549 | /* U S B C A L L B A C K F U N C T I O N S */ | |
550 | /************************************************************************/ | |
551 | /************************************************************************/ | |
552 | ||
553 | /***************************************************************************** | |
554 | * edge_interrupt_callback | |
03f0dbf7 | 555 | * this is the callback function for when we have received data on the |
1da177e4 LT |
556 | * interrupt endpoint. |
557 | *****************************************************************************/ | |
03f0dbf7 | 558 | static void edge_interrupt_callback(struct urb *urb) |
1da177e4 | 559 | { |
984f6868 GKH |
560 | struct edgeport_serial *edge_serial = urb->context; |
561 | struct device *dev; | |
1da177e4 LT |
562 | struct edgeport_port *edge_port; |
563 | struct usb_serial_port *port; | |
564 | unsigned char *data = urb->transfer_buffer; | |
565 | int length = urb->actual_length; | |
566 | int bytes_avail; | |
567 | int position; | |
568 | int txCredits; | |
569 | int portNumber; | |
570 | int result; | |
2a393f5f | 571 | int status = urb->status; |
1da177e4 | 572 | |
2a393f5f | 573 | switch (status) { |
1da177e4 LT |
574 | case 0: |
575 | /* success */ | |
576 | break; | |
577 | case -ECONNRESET: | |
578 | case -ENOENT: | |
579 | case -ESHUTDOWN: | |
580 | /* this urb is terminated, clean up */ | |
984f6868 | 581 | dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); |
1da177e4 LT |
582 | return; |
583 | default: | |
984f6868 | 584 | dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); |
1da177e4 LT |
585 | goto exit; |
586 | } | |
587 | ||
984f6868 GKH |
588 | dev = &edge_serial->serial->dev->dev; |
589 | ||
03f0dbf7 | 590 | /* process this interrupt-read even if there are no ports open */ |
1da177e4 | 591 | if (length) { |
59d33f2f | 592 | usb_serial_debug_data(dev, __func__, length, data); |
1da177e4 LT |
593 | |
594 | if (length > 1) { | |
595 | bytes_avail = data[0] | (data[1] << 8); | |
596 | if (bytes_avail) { | |
597 | spin_lock(&edge_serial->es_lock); | |
598 | edge_serial->rxBytesAvail += bytes_avail; | |
984f6868 GKH |
599 | dev_dbg(dev, |
600 | "%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d\n", | |
601 | __func__, bytes_avail, | |
602 | edge_serial->rxBytesAvail, | |
603 | edge_serial->read_in_progress); | |
1da177e4 LT |
604 | |
605 | if (edge_serial->rxBytesAvail > 0 && | |
606 | !edge_serial->read_in_progress) { | |
984f6868 | 607 | dev_dbg(dev, "%s - posting a read\n", __func__); |
cb8eaa8b | 608 | edge_serial->read_in_progress = true; |
1da177e4 | 609 | |
03f0dbf7 AC |
610 | /* we have pending bytes on the |
611 | bulk in pipe, send a request */ | |
1da177e4 LT |
612 | result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); |
613 | if (result) { | |
984f6868 GKH |
614 | dev_err(dev, |
615 | "%s - usb_submit_urb(read bulk) failed with result = %d\n", | |
616 | __func__, result); | |
cb8eaa8b | 617 | edge_serial->read_in_progress = false; |
1da177e4 LT |
618 | } |
619 | } | |
620 | spin_unlock(&edge_serial->es_lock); | |
621 | } | |
622 | } | |
623 | /* grab the txcredits for the ports if available */ | |
624 | position = 2; | |
625 | portNumber = 0; | |
03f0dbf7 AC |
626 | while ((position < length) && |
627 | (portNumber < edge_serial->serial->num_ports)) { | |
1da177e4 LT |
628 | txCredits = data[position] | (data[position+1] << 8); |
629 | if (txCredits) { | |
630 | port = edge_serial->serial->port[portNumber]; | |
631 | edge_port = usb_get_serial_port_data(port); | |
632 | if (edge_port->open) { | |
633 | spin_lock(&edge_port->ep_lock); | |
634 | edge_port->txCredits += txCredits; | |
635 | spin_unlock(&edge_port->ep_lock); | |
984f6868 GKH |
636 | dev_dbg(dev, "%s - txcredits for port%d = %d\n", |
637 | __func__, portNumber, | |
638 | edge_port->txCredits); | |
1da177e4 | 639 | |
03f0dbf7 AC |
640 | /* tell the tty driver that something |
641 | has changed */ | |
6aad04f2 | 642 | tty_port_tty_wakeup(&edge_port->port->port); |
03f0dbf7 AC |
643 | /* Since we have more credit, check |
644 | if more data can be sent */ | |
645 | send_more_port_data(edge_serial, | |
646 | edge_port); | |
1da177e4 LT |
647 | } |
648 | } | |
649 | position += 2; | |
650 | ++portNumber; | |
651 | } | |
652 | } | |
653 | ||
654 | exit: | |
03f0dbf7 AC |
655 | result = usb_submit_urb(urb, GFP_ATOMIC); |
656 | if (result) | |
657 | dev_err(&urb->dev->dev, | |
658 | "%s - Error %d submitting control urb\n", | |
659 | __func__, result); | |
1da177e4 LT |
660 | } |
661 | ||
662 | ||
663 | /***************************************************************************** | |
664 | * edge_bulk_in_callback | |
03f0dbf7 | 665 | * this is the callback function for when we have received data on the |
1da177e4 LT |
666 | * bulk in endpoint. |
667 | *****************************************************************************/ | |
03f0dbf7 | 668 | static void edge_bulk_in_callback(struct urb *urb) |
1da177e4 | 669 | { |
cdc97792 | 670 | struct edgeport_serial *edge_serial = urb->context; |
984f6868 | 671 | struct device *dev; |
1da177e4 | 672 | unsigned char *data = urb->transfer_buffer; |
2a393f5f | 673 | int retval; |
1da177e4 | 674 | __u16 raw_data_length; |
2a393f5f | 675 | int status = urb->status; |
1da177e4 | 676 | |
2a393f5f | 677 | if (status) { |
984f6868 GKH |
678 | dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", |
679 | __func__, status); | |
cb8eaa8b | 680 | edge_serial->read_in_progress = false; |
1da177e4 LT |
681 | return; |
682 | } | |
683 | ||
684 | if (urb->actual_length == 0) { | |
984f6868 | 685 | dev_dbg(&urb->dev->dev, "%s - read bulk callback with no data\n", __func__); |
cb8eaa8b | 686 | edge_serial->read_in_progress = false; |
1da177e4 LT |
687 | return; |
688 | } | |
689 | ||
984f6868 | 690 | dev = &edge_serial->serial->dev->dev; |
1da177e4 LT |
691 | raw_data_length = urb->actual_length; |
692 | ||
59d33f2f | 693 | usb_serial_debug_data(dev, __func__, raw_data_length, data); |
1da177e4 LT |
694 | |
695 | spin_lock(&edge_serial->es_lock); | |
696 | ||
697 | /* decrement our rxBytes available by the number that we just got */ | |
698 | edge_serial->rxBytesAvail -= raw_data_length; | |
699 | ||
984f6868 GKH |
700 | dev_dbg(dev, "%s - Received = %d, rxBytesAvail %d\n", __func__, |
701 | raw_data_length, edge_serial->rxBytesAvail); | |
1da177e4 | 702 | |
03f0dbf7 | 703 | process_rcvd_data(edge_serial, data, urb->actual_length); |
1da177e4 LT |
704 | |
705 | /* check to see if there's any more data for us to read */ | |
706 | if (edge_serial->rxBytesAvail > 0) { | |
984f6868 | 707 | dev_dbg(dev, "%s - posting a read\n", __func__); |
2a393f5f GKH |
708 | retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); |
709 | if (retval) { | |
984f6868 GKH |
710 | dev_err(dev, |
711 | "%s - usb_submit_urb(read bulk) failed, retval = %d\n", | |
712 | __func__, retval); | |
cb8eaa8b | 713 | edge_serial->read_in_progress = false; |
1da177e4 LT |
714 | } |
715 | } else { | |
cb8eaa8b | 716 | edge_serial->read_in_progress = false; |
1da177e4 LT |
717 | } |
718 | ||
719 | spin_unlock(&edge_serial->es_lock); | |
720 | } | |
721 | ||
722 | ||
723 | /***************************************************************************** | |
724 | * edge_bulk_out_data_callback | |
03f0dbf7 AC |
725 | * this is the callback function for when we have finished sending |
726 | * serial data on the bulk out endpoint. | |
1da177e4 | 727 | *****************************************************************************/ |
03f0dbf7 | 728 | static void edge_bulk_out_data_callback(struct urb *urb) |
1da177e4 | 729 | { |
cdc97792 | 730 | struct edgeport_port *edge_port = urb->context; |
2a393f5f | 731 | int status = urb->status; |
1da177e4 | 732 | |
2a393f5f | 733 | if (status) { |
984f6868 GKH |
734 | dev_dbg(&urb->dev->dev, |
735 | "%s - nonzero write bulk status received: %d\n", | |
736 | __func__, status); | |
1da177e4 LT |
737 | } |
738 | ||
6aad04f2 JS |
739 | if (edge_port->open) |
740 | tty_port_tty_wakeup(&edge_port->port->port); | |
1da177e4 | 741 | |
03f0dbf7 | 742 | /* Release the Write URB */ |
cb8eaa8b | 743 | edge_port->write_in_progress = false; |
1da177e4 | 744 | |
03f0dbf7 AC |
745 | /* Check if more data needs to be sent */ |
746 | send_more_port_data((struct edgeport_serial *) | |
747 | (usb_get_serial_data(edge_port->port->serial)), edge_port); | |
1da177e4 LT |
748 | } |
749 | ||
750 | ||
751 | /***************************************************************************** | |
752 | * BulkOutCmdCallback | |
03f0dbf7 AC |
753 | * this is the callback function for when we have finished sending a |
754 | * command on the bulk out endpoint. | |
1da177e4 | 755 | *****************************************************************************/ |
03f0dbf7 | 756 | static void edge_bulk_out_cmd_callback(struct urb *urb) |
1da177e4 | 757 | { |
cdc97792 | 758 | struct edgeport_port *edge_port = urb->context; |
1da177e4 LT |
759 | int status = urb->status; |
760 | ||
96c706ed | 761 | atomic_dec(&CmdUrbs); |
984f6868 GKH |
762 | dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n", |
763 | __func__, urb, atomic_read(&CmdUrbs)); | |
1da177e4 LT |
764 | |
765 | ||
766 | /* clean up the transfer buffer */ | |
1bc3c9e1 | 767 | kfree(urb->transfer_buffer); |
1da177e4 LT |
768 | |
769 | /* Free the command urb */ | |
03f0dbf7 | 770 | usb_free_urb(urb); |
1da177e4 LT |
771 | |
772 | if (status) { | |
984f6868 GKH |
773 | dev_dbg(&urb->dev->dev, |
774 | "%s - nonzero write bulk status received: %d\n", | |
775 | __func__, status); | |
1da177e4 LT |
776 | return; |
777 | } | |
778 | ||
1da177e4 | 779 | /* tell the tty driver that something has changed */ |
6aad04f2 JS |
780 | if (edge_port->open) |
781 | tty_port_tty_wakeup(&edge_port->port->port); | |
1da177e4 LT |
782 | |
783 | /* we have completed the command */ | |
cb8eaa8b | 784 | edge_port->commandPending = false; |
1da177e4 LT |
785 | wake_up(&edge_port->wait_command); |
786 | } | |
787 | ||
788 | ||
789 | /***************************************************************************** | |
790 | * Driver tty interface functions | |
791 | *****************************************************************************/ | |
792 | ||
793 | /***************************************************************************** | |
794 | * SerialOpen | |
795 | * this function is called by the tty driver when a port is opened | |
796 | * If successful, we return 0 | |
797 | * Otherwise we return a negative error number. | |
798 | *****************************************************************************/ | |
a509a7e4 | 799 | static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) |
1da177e4 LT |
800 | { |
801 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); | |
984f6868 | 802 | struct device *dev = &port->dev; |
1da177e4 LT |
803 | struct usb_serial *serial; |
804 | struct edgeport_serial *edge_serial; | |
805 | int response; | |
806 | ||
1da177e4 LT |
807 | if (edge_port == NULL) |
808 | return -ENODEV; | |
809 | ||
03f0dbf7 AC |
810 | /* see if we've set up our endpoint info yet (can't set it up |
811 | in edge_startup as the structures were not set up at that time.) */ | |
1da177e4 LT |
812 | serial = port->serial; |
813 | edge_serial = usb_get_serial_data(serial); | |
95da310e | 814 | if (edge_serial == NULL) |
1da177e4 | 815 | return -ENODEV; |
1da177e4 LT |
816 | if (edge_serial->interrupt_in_buffer == NULL) { |
817 | struct usb_serial_port *port0 = serial->port[0]; | |
03f0dbf7 | 818 | |
1da177e4 | 819 | /* not set up yet, so do it now */ |
03f0dbf7 AC |
820 | edge_serial->interrupt_in_buffer = |
821 | port0->interrupt_in_buffer; | |
822 | edge_serial->interrupt_in_endpoint = | |
823 | port0->interrupt_in_endpointAddress; | |
1da177e4 LT |
824 | edge_serial->interrupt_read_urb = port0->interrupt_in_urb; |
825 | edge_serial->bulk_in_buffer = port0->bulk_in_buffer; | |
03f0dbf7 AC |
826 | edge_serial->bulk_in_endpoint = |
827 | port0->bulk_in_endpointAddress; | |
1da177e4 | 828 | edge_serial->read_urb = port0->read_urb; |
03f0dbf7 AC |
829 | edge_serial->bulk_out_endpoint = |
830 | port0->bulk_out_endpointAddress; | |
831 | ||
1da177e4 LT |
832 | /* set up our interrupt urb */ |
833 | usb_fill_int_urb(edge_serial->interrupt_read_urb, | |
03f0dbf7 AC |
834 | serial->dev, |
835 | usb_rcvintpipe(serial->dev, | |
836 | port0->interrupt_in_endpointAddress), | |
837 | port0->interrupt_in_buffer, | |
838 | edge_serial->interrupt_read_urb->transfer_buffer_length, | |
839 | edge_interrupt_callback, edge_serial, | |
840 | edge_serial->interrupt_read_urb->interval); | |
841 | ||
1da177e4 LT |
842 | /* set up our bulk in urb */ |
843 | usb_fill_bulk_urb(edge_serial->read_urb, serial->dev, | |
03f0dbf7 AC |
844 | usb_rcvbulkpipe(serial->dev, |
845 | port0->bulk_in_endpointAddress), | |
846 | port0->bulk_in_buffer, | |
847 | edge_serial->read_urb->transfer_buffer_length, | |
848 | edge_bulk_in_callback, edge_serial); | |
cb8eaa8b | 849 | edge_serial->read_in_progress = false; |
1da177e4 LT |
850 | |
851 | /* start interrupt read for this edgeport | |
03f0dbf7 AC |
852 | * this interrupt will continue as long |
853 | * as the edgeport is connected */ | |
854 | response = usb_submit_urb(edge_serial->interrupt_read_urb, | |
855 | GFP_KERNEL); | |
1da177e4 | 856 | if (response) { |
984f6868 GKH |
857 | dev_err(dev, "%s - Error %d submitting control urb\n", |
858 | __func__, response); | |
1da177e4 LT |
859 | } |
860 | } | |
03f0dbf7 | 861 | |
1da177e4 LT |
862 | /* initialize our wait queues */ |
863 | init_waitqueue_head(&edge_port->wait_open); | |
864 | init_waitqueue_head(&edge_port->wait_chase); | |
1da177e4 LT |
865 | init_waitqueue_head(&edge_port->wait_command); |
866 | ||
1da177e4 | 867 | /* initialize our port settings */ |
03f0dbf7 AC |
868 | edge_port->txCredits = 0; /* Can't send any data yet */ |
869 | /* Must always set this bit to enable ints! */ | |
870 | edge_port->shadowMCR = MCR_MASTER_IE; | |
cb8eaa8b | 871 | edge_port->chaseResponsePending = false; |
1da177e4 LT |
872 | |
873 | /* send a open port command */ | |
cb8eaa8b RK |
874 | edge_port->openPending = true; |
875 | edge_port->open = false; | |
03f0dbf7 | 876 | response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0); |
1da177e4 LT |
877 | |
878 | if (response < 0) { | |
984f6868 | 879 | dev_err(dev, "%s - error sending open port command\n", __func__); |
cb8eaa8b | 880 | edge_port->openPending = false; |
1da177e4 LT |
881 | return -ENODEV; |
882 | } | |
883 | ||
884 | /* now wait for the port to be completely opened */ | |
03f0dbf7 AC |
885 | wait_event_timeout(edge_port->wait_open, !edge_port->openPending, |
886 | OPEN_TIMEOUT); | |
1da177e4 | 887 | |
cb8eaa8b | 888 | if (!edge_port->open) { |
1da177e4 | 889 | /* open timed out */ |
984f6868 | 890 | dev_dbg(dev, "%s - open timedout\n", __func__); |
cb8eaa8b | 891 | edge_port->openPending = false; |
1da177e4 LT |
892 | return -ENODEV; |
893 | } | |
894 | ||
895 | /* create the txfifo */ | |
896 | edge_port->txfifo.head = 0; | |
897 | edge_port->txfifo.tail = 0; | |
898 | edge_port->txfifo.count = 0; | |
899 | edge_port->txfifo.size = edge_port->maxTxCredits; | |
03f0dbf7 | 900 | edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL); |
1da177e4 LT |
901 | |
902 | if (!edge_port->txfifo.fifo) { | |
984f6868 | 903 | dev_dbg(dev, "%s - no memory\n", __func__); |
335f8514 | 904 | edge_close(port); |
1da177e4 LT |
905 | return -ENOMEM; |
906 | } | |
907 | ||
908 | /* Allocate a URB for the write */ | |
03f0dbf7 | 909 | edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL); |
cb8eaa8b | 910 | edge_port->write_in_progress = false; |
1da177e4 LT |
911 | |
912 | if (!edge_port->write_urb) { | |
984f6868 | 913 | dev_dbg(dev, "%s - no memory\n", __func__); |
335f8514 | 914 | edge_close(port); |
1da177e4 LT |
915 | return -ENOMEM; |
916 | } | |
917 | ||
984f6868 GKH |
918 | dev_dbg(dev, "%s(%d) - Initialize TX fifo to %d bytes\n", |
919 | __func__, port->number, edge_port->maxTxCredits); | |
1da177e4 LT |
920 | |
921 | return 0; | |
922 | } | |
923 | ||
924 | ||
925 | /************************************************************************ | |
926 | * | |
927 | * block_until_chase_response | |
928 | * | |
929 | * This function will block the close until one of the following: | |
930 | * 1. Response to our Chase comes from Edgeport | |
dc0d5c1e | 931 | * 2. A timeout of 10 seconds without activity has expired |
1da177e4 LT |
932 | * (1K of Edgeport data @ 2400 baud ==> 4 sec to empty) |
933 | * | |
934 | ************************************************************************/ | |
935 | static void block_until_chase_response(struct edgeport_port *edge_port) | |
936 | { | |
984f6868 | 937 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
938 | DEFINE_WAIT(wait); |
939 | __u16 lastCredits; | |
940 | int timeout = 1*HZ; | |
941 | int loop = 10; | |
942 | ||
943 | while (1) { | |
03f0dbf7 | 944 | /* Save Last credits */ |
1da177e4 LT |
945 | lastCredits = edge_port->txCredits; |
946 | ||
03f0dbf7 | 947 | /* Did we get our Chase response */ |
cb8eaa8b | 948 | if (!edge_port->chaseResponsePending) { |
984f6868 | 949 | dev_dbg(dev, "%s - Got Chase Response\n", __func__); |
1da177e4 | 950 | |
03f0dbf7 AC |
951 | /* did we get all of our credit back? */ |
952 | if (edge_port->txCredits == edge_port->maxTxCredits) { | |
984f6868 | 953 | dev_dbg(dev, "%s - Got all credits\n", __func__); |
1da177e4 LT |
954 | return; |
955 | } | |
956 | } | |
957 | ||
03f0dbf7 AC |
958 | /* Block the thread for a while */ |
959 | prepare_to_wait(&edge_port->wait_chase, &wait, | |
960 | TASK_UNINTERRUPTIBLE); | |
1da177e4 LT |
961 | schedule_timeout(timeout); |
962 | finish_wait(&edge_port->wait_chase, &wait); | |
963 | ||
964 | if (lastCredits == edge_port->txCredits) { | |
03f0dbf7 | 965 | /* No activity.. count down. */ |
1da177e4 LT |
966 | loop--; |
967 | if (loop == 0) { | |
cb8eaa8b | 968 | edge_port->chaseResponsePending = false; |
984f6868 | 969 | dev_dbg(dev, "%s - Chase TIMEOUT\n", __func__); |
1da177e4 LT |
970 | return; |
971 | } | |
972 | } else { | |
03f0dbf7 | 973 | /* Reset timeout value back to 10 seconds */ |
984f6868 | 974 | dev_dbg(dev, "%s - Last %d, Current %d\n", __func__, |
03f0dbf7 | 975 | lastCredits, edge_port->txCredits); |
1da177e4 LT |
976 | loop = 10; |
977 | } | |
978 | } | |
979 | } | |
980 | ||
981 | ||
982 | /************************************************************************ | |
983 | * | |
984 | * block_until_tx_empty | |
985 | * | |
986 | * This function will block the close until one of the following: | |
987 | * 1. TX count are 0 | |
988 | * 2. The edgeport has stopped | |
dc0d5c1e | 989 | * 3. A timeout of 3 seconds without activity has expired |
1da177e4 LT |
990 | * |
991 | ************************************************************************/ | |
03f0dbf7 | 992 | static void block_until_tx_empty(struct edgeport_port *edge_port) |
1da177e4 | 993 | { |
984f6868 | 994 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
995 | DEFINE_WAIT(wait); |
996 | struct TxFifo *fifo = &edge_port->txfifo; | |
997 | __u32 lastCount; | |
998 | int timeout = HZ/10; | |
999 | int loop = 30; | |
1000 | ||
1001 | while (1) { | |
03f0dbf7 | 1002 | /* Save Last count */ |
1da177e4 LT |
1003 | lastCount = fifo->count; |
1004 | ||
03f0dbf7 | 1005 | /* Is the Edgeport Buffer empty? */ |
1da177e4 | 1006 | if (lastCount == 0) { |
984f6868 | 1007 | dev_dbg(dev, "%s - TX Buffer Empty\n", __func__); |
1da177e4 LT |
1008 | return; |
1009 | } | |
1010 | ||
03f0dbf7 AC |
1011 | /* Block the thread for a while */ |
1012 | prepare_to_wait(&edge_port->wait_chase, &wait, | |
1013 | TASK_UNINTERRUPTIBLE); | |
1da177e4 LT |
1014 | schedule_timeout(timeout); |
1015 | finish_wait(&edge_port->wait_chase, &wait); | |
1016 | ||
984f6868 | 1017 | dev_dbg(dev, "%s wait\n", __func__); |
1da177e4 LT |
1018 | |
1019 | if (lastCount == fifo->count) { | |
03f0dbf7 | 1020 | /* No activity.. count down. */ |
1da177e4 LT |
1021 | loop--; |
1022 | if (loop == 0) { | |
984f6868 | 1023 | dev_dbg(dev, "%s - TIMEOUT\n", __func__); |
1da177e4 LT |
1024 | return; |
1025 | } | |
1026 | } else { | |
03f0dbf7 | 1027 | /* Reset timeout value back to seconds */ |
1da177e4 LT |
1028 | loop = 30; |
1029 | } | |
1030 | } | |
1031 | } | |
1032 | ||
1033 | ||
1034 | /***************************************************************************** | |
1035 | * edge_close | |
1036 | * this function is called by the tty driver when a port is closed | |
1037 | *****************************************************************************/ | |
335f8514 | 1038 | static void edge_close(struct usb_serial_port *port) |
1da177e4 LT |
1039 | { |
1040 | struct edgeport_serial *edge_serial; | |
1041 | struct edgeport_port *edge_port; | |
1042 | int status; | |
1043 | ||
1da177e4 LT |
1044 | edge_serial = usb_get_serial_data(port->serial); |
1045 | edge_port = usb_get_serial_port_data(port); | |
03f0dbf7 | 1046 | if (edge_serial == NULL || edge_port == NULL) |
1da177e4 | 1047 | return; |
03f0dbf7 AC |
1048 | |
1049 | /* block until tx is empty */ | |
1da177e4 LT |
1050 | block_until_tx_empty(edge_port); |
1051 | ||
cb8eaa8b | 1052 | edge_port->closePending = true; |
1da177e4 | 1053 | |
6e8cf775 GKH |
1054 | if ((!edge_serial->is_epic) || |
1055 | ((edge_serial->is_epic) && | |
1056 | (edge_serial->epic_descriptor.Supports.IOSPChase))) { | |
1057 | /* flush and chase */ | |
cb8eaa8b | 1058 | edge_port->chaseResponsePending = true; |
6e8cf775 | 1059 | |
984f6868 | 1060 | dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); |
03f0dbf7 AC |
1061 | status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); |
1062 | if (status == 0) | |
1063 | /* block until chase finished */ | |
6e8cf775 | 1064 | block_until_chase_response(edge_port); |
03f0dbf7 | 1065 | else |
cb8eaa8b | 1066 | edge_port->chaseResponsePending = false; |
1da177e4 LT |
1067 | } |
1068 | ||
6e8cf775 GKH |
1069 | if ((!edge_serial->is_epic) || |
1070 | ((edge_serial->is_epic) && | |
1071 | (edge_serial->epic_descriptor.Supports.IOSPClose))) { | |
1072 | /* close the port */ | |
984f6868 | 1073 | dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__); |
03f0dbf7 | 1074 | send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0); |
6e8cf775 | 1075 | } |
1da177e4 | 1076 | |
03f0dbf7 | 1077 | /* port->close = true; */ |
cb8eaa8b RK |
1078 | edge_port->closePending = false; |
1079 | edge_port->open = false; | |
1080 | edge_port->openPending = false; | |
1da177e4 | 1081 | |
9a25f44f | 1082 | usb_kill_urb(edge_port->write_urb); |
1da177e4 LT |
1083 | |
1084 | if (edge_port->write_urb) { | |
03f0dbf7 AC |
1085 | /* if this urb had a transfer buffer already |
1086 | (old transfer) free it */ | |
1bc3c9e1 JJ |
1087 | kfree(edge_port->write_urb->transfer_buffer); |
1088 | usb_free_urb(edge_port->write_urb); | |
1da177e4 LT |
1089 | edge_port->write_urb = NULL; |
1090 | } | |
1bc3c9e1 JJ |
1091 | kfree(edge_port->txfifo.fifo); |
1092 | edge_port->txfifo.fifo = NULL; | |
03f0dbf7 | 1093 | } |
1da177e4 LT |
1094 | |
1095 | /***************************************************************************** | |
1096 | * SerialWrite | |
03f0dbf7 AC |
1097 | * this function is called by the tty driver when data should be written |
1098 | * to the port. | |
1099 | * If successful, we return the number of bytes written, otherwise we | |
1100 | * return a negative error number. | |
1da177e4 | 1101 | *****************************************************************************/ |
95da310e AC |
1102 | static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, |
1103 | const unsigned char *data, int count) | |
1da177e4 LT |
1104 | { |
1105 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); | |
1106 | struct TxFifo *fifo; | |
1107 | int copySize; | |
1108 | int bytesleft; | |
1109 | int firsthalf; | |
1110 | int secondhalf; | |
1111 | unsigned long flags; | |
1112 | ||
1da177e4 LT |
1113 | if (edge_port == NULL) |
1114 | return -ENODEV; | |
1115 | ||
03f0dbf7 | 1116 | /* get a pointer to the Tx fifo */ |
1da177e4 LT |
1117 | fifo = &edge_port->txfifo; |
1118 | ||
1119 | spin_lock_irqsave(&edge_port->ep_lock, flags); | |
1120 | ||
03f0dbf7 AC |
1121 | /* calculate number of bytes to put in fifo */ |
1122 | copySize = min((unsigned int)count, | |
1123 | (edge_port->txCredits - fifo->count)); | |
1da177e4 | 1124 | |
984f6868 GKH |
1125 | dev_dbg(&port->dev, "%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes\n", |
1126 | __func__, port->number, count, | |
03f0dbf7 | 1127 | edge_port->txCredits - fifo->count, copySize); |
1da177e4 | 1128 | |
03f0dbf7 AC |
1129 | /* catch writes of 0 bytes which the tty driver likes to give us, |
1130 | and when txCredits is empty */ | |
1da177e4 | 1131 | if (copySize == 0) { |
984f6868 | 1132 | dev_dbg(&port->dev, "%s - copySize = Zero\n", __func__); |
1da177e4 LT |
1133 | goto finish_write; |
1134 | } | |
1135 | ||
03f0dbf7 AC |
1136 | /* queue the data |
1137 | * since we can never overflow the buffer we do not have to check for a | |
1138 | * full condition | |
1139 | * | |
1140 | * the copy is done is two parts -- first fill to the end of the buffer | |
1141 | * then copy the reset from the start of the buffer | |
1142 | */ | |
1da177e4 | 1143 | bytesleft = fifo->size - fifo->head; |
03f0dbf7 | 1144 | firsthalf = min(bytesleft, copySize); |
984f6868 GKH |
1145 | dev_dbg(&port->dev, "%s - copy %d bytes of %d into fifo \n", __func__, |
1146 | firsthalf, bytesleft); | |
1da177e4 LT |
1147 | |
1148 | /* now copy our data */ | |
1149 | memcpy(&fifo->fifo[fifo->head], data, firsthalf); | |
59d33f2f | 1150 | usb_serial_debug_data(&port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]); |
1da177e4 | 1151 | |
03f0dbf7 | 1152 | /* update the index and size */ |
1da177e4 LT |
1153 | fifo->head += firsthalf; |
1154 | fifo->count += firsthalf; | |
1155 | ||
03f0dbf7 AC |
1156 | /* wrap the index */ |
1157 | if (fifo->head == fifo->size) | |
1da177e4 | 1158 | fifo->head = 0; |
1da177e4 LT |
1159 | |
1160 | secondhalf = copySize-firsthalf; | |
1161 | ||
1162 | if (secondhalf) { | |
984f6868 | 1163 | dev_dbg(&port->dev, "%s - copy rest of data %d\n", __func__, secondhalf); |
1da177e4 | 1164 | memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf); |
59d33f2f | 1165 | usb_serial_debug_data(&port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]); |
03f0dbf7 | 1166 | /* update the index and size */ |
1da177e4 LT |
1167 | fifo->count += secondhalf; |
1168 | fifo->head += secondhalf; | |
03f0dbf7 AC |
1169 | /* No need to check for wrap since we can not get to end of |
1170 | * the fifo in this part | |
1171 | */ | |
1da177e4 LT |
1172 | } |
1173 | ||
1174 | finish_write: | |
1175 | spin_unlock_irqrestore(&edge_port->ep_lock, flags); | |
1176 | ||
03f0dbf7 AC |
1177 | send_more_port_data((struct edgeport_serial *) |
1178 | usb_get_serial_data(port->serial), edge_port); | |
1da177e4 | 1179 | |
984f6868 GKH |
1180 | dev_dbg(&port->dev, "%s wrote %d byte(s) TxCredits %d, Fifo %d\n", |
1181 | __func__, copySize, edge_port->txCredits, fifo->count); | |
1da177e4 | 1182 | |
03f0dbf7 | 1183 | return copySize; |
1da177e4 LT |
1184 | } |
1185 | ||
1186 | ||
1187 | /************************************************************************ | |
1188 | * | |
1189 | * send_more_port_data() | |
1190 | * | |
1191 | * This routine attempts to write additional UART transmit data | |
1192 | * to a port over the USB bulk pipe. It is called (1) when new | |
1193 | * data has been written to a port's TxBuffer from higher layers | |
1194 | * (2) when the peripheral sends us additional TxCredits indicating | |
1195 | * that it can accept more Tx data for a given port; and (3) when | |
1196 | * a bulk write completes successfully and we want to see if we | |
1197 | * can transmit more. | |
1198 | * | |
1199 | ************************************************************************/ | |
03f0dbf7 AC |
1200 | static void send_more_port_data(struct edgeport_serial *edge_serial, |
1201 | struct edgeport_port *edge_port) | |
1da177e4 LT |
1202 | { |
1203 | struct TxFifo *fifo = &edge_port->txfifo; | |
984f6868 | 1204 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
1205 | struct urb *urb; |
1206 | unsigned char *buffer; | |
1207 | int status; | |
1208 | int count; | |
1209 | int bytesleft; | |
1210 | int firsthalf; | |
1211 | int secondhalf; | |
1212 | unsigned long flags; | |
1213 | ||
1da177e4 LT |
1214 | spin_lock_irqsave(&edge_port->ep_lock, flags); |
1215 | ||
1216 | if (edge_port->write_in_progress || | |
1217 | !edge_port->open || | |
1218 | (fifo->count == 0)) { | |
984f6868 GKH |
1219 | dev_dbg(dev, "%s(%d) EXIT - fifo %d, PendingWrite = %d\n", |
1220 | __func__, edge_port->port->number, | |
1221 | fifo->count, edge_port->write_in_progress); | |
1da177e4 LT |
1222 | goto exit_send; |
1223 | } | |
1224 | ||
03f0dbf7 AC |
1225 | /* since the amount of data in the fifo will always fit into the |
1226 | * edgeport buffer we do not need to check the write length | |
1227 | * | |
1228 | * Do we have enough credits for this port to make it worthwhile | |
1229 | * to bother queueing a write. If it's too small, say a few bytes, | |
1230 | * it's better to wait for more credits so we can do a larger write. | |
1231 | */ | |
1232 | if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) { | |
984f6868 | 1233 | dev_dbg(dev, "%s(%d) Not enough credit - fifo %d TxCredit %d\n", |
03f0dbf7 AC |
1234 | __func__, edge_port->port->number, fifo->count, |
1235 | edge_port->txCredits); | |
1da177e4 LT |
1236 | goto exit_send; |
1237 | } | |
1238 | ||
03f0dbf7 | 1239 | /* lock this write */ |
cb8eaa8b | 1240 | edge_port->write_in_progress = true; |
1da177e4 | 1241 | |
03f0dbf7 | 1242 | /* get a pointer to the write_urb */ |
1da177e4 LT |
1243 | urb = edge_port->write_urb; |
1244 | ||
1bc3c9e1 JJ |
1245 | /* make sure transfer buffer is freed */ |
1246 | kfree(urb->transfer_buffer); | |
1247 | urb->transfer_buffer = NULL; | |
1da177e4 | 1248 | |
03f0dbf7 AC |
1249 | /* build the data header for the buffer and port that we are about |
1250 | to send out */ | |
1da177e4 | 1251 | count = fifo->count; |
03f0dbf7 | 1252 | buffer = kmalloc(count+2, GFP_ATOMIC); |
1da177e4 | 1253 | if (buffer == NULL) { |
22a416c4 | 1254 | dev_err_console(edge_port->port, |
03f0dbf7 | 1255 | "%s - no more kernel memory...\n", __func__); |
cb8eaa8b | 1256 | edge_port->write_in_progress = false; |
1da177e4 LT |
1257 | goto exit_send; |
1258 | } | |
03f0dbf7 AC |
1259 | buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->number |
1260 | - edge_port->port->serial->minor, count); | |
1261 | buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->number | |
1262 | - edge_port->port->serial->minor, count); | |
1da177e4 LT |
1263 | |
1264 | /* now copy our data */ | |
1265 | bytesleft = fifo->size - fifo->tail; | |
03f0dbf7 | 1266 | firsthalf = min(bytesleft, count); |
1da177e4 LT |
1267 | memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf); |
1268 | fifo->tail += firsthalf; | |
1269 | fifo->count -= firsthalf; | |
03f0dbf7 | 1270 | if (fifo->tail == fifo->size) |
1da177e4 | 1271 | fifo->tail = 0; |
1da177e4 LT |
1272 | |
1273 | secondhalf = count-firsthalf; | |
1274 | if (secondhalf) { | |
03f0dbf7 AC |
1275 | memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], |
1276 | secondhalf); | |
1da177e4 LT |
1277 | fifo->tail += secondhalf; |
1278 | fifo->count -= secondhalf; | |
1279 | } | |
1280 | ||
1281 | if (count) | |
59d33f2f | 1282 | usb_serial_debug_data(&edge_port->port->dev, __func__, count, &buffer[2]); |
1da177e4 LT |
1283 | |
1284 | /* fill up the urb with all of our data and submit it */ | |
03f0dbf7 AC |
1285 | usb_fill_bulk_urb(urb, edge_serial->serial->dev, |
1286 | usb_sndbulkpipe(edge_serial->serial->dev, | |
1287 | edge_serial->bulk_out_endpoint), | |
1288 | buffer, count+2, | |
1289 | edge_bulk_out_data_callback, edge_port); | |
1da177e4 LT |
1290 | |
1291 | /* decrement the number of credits we have by the number we just sent */ | |
1292 | edge_port->txCredits -= count; | |
d36a7712 | 1293 | edge_port->port->icount.tx += count; |
1da177e4 | 1294 | |
1da177e4 LT |
1295 | status = usb_submit_urb(urb, GFP_ATOMIC); |
1296 | if (status) { | |
1297 | /* something went wrong */ | |
22a416c4 | 1298 | dev_err_console(edge_port->port, |
03f0dbf7 AC |
1299 | "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", |
1300 | __func__, status); | |
cb8eaa8b | 1301 | edge_port->write_in_progress = false; |
1da177e4 LT |
1302 | |
1303 | /* revert the credits as something bad happened. */ | |
1304 | edge_port->txCredits += count; | |
d36a7712 | 1305 | edge_port->port->icount.tx -= count; |
1da177e4 | 1306 | } |
984f6868 GKH |
1307 | dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n", |
1308 | __func__, count, edge_port->txCredits, fifo->count); | |
1da177e4 LT |
1309 | |
1310 | exit_send: | |
1311 | spin_unlock_irqrestore(&edge_port->ep_lock, flags); | |
1312 | } | |
1313 | ||
1314 | ||
1315 | /***************************************************************************** | |
1316 | * edge_write_room | |
03f0dbf7 AC |
1317 | * this function is called by the tty driver when it wants to know how |
1318 | * many bytes of data we can accept for a specific port. If successful, | |
1319 | * we return the amount of room that we have for this port (the txCredits) | |
1320 | * otherwise we return a negative error number. | |
1da177e4 | 1321 | *****************************************************************************/ |
95da310e | 1322 | static int edge_write_room(struct tty_struct *tty) |
1da177e4 | 1323 | { |
95da310e | 1324 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 LT |
1325 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1326 | int room; | |
1327 | unsigned long flags; | |
1328 | ||
1da177e4 | 1329 | if (edge_port == NULL) |
d76f2f44 | 1330 | return 0; |
cb8eaa8b | 1331 | if (edge_port->closePending) |
d76f2f44 | 1332 | return 0; |
1da177e4 | 1333 | |
1da177e4 | 1334 | if (!edge_port->open) { |
984f6868 | 1335 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
d76f2f44 | 1336 | return 0; |
1da177e4 LT |
1337 | } |
1338 | ||
03f0dbf7 | 1339 | /* total of both buffers is still txCredit */ |
1da177e4 LT |
1340 | spin_lock_irqsave(&edge_port->ep_lock, flags); |
1341 | room = edge_port->txCredits - edge_port->txfifo.count; | |
1342 | spin_unlock_irqrestore(&edge_port->ep_lock, flags); | |
1343 | ||
984f6868 | 1344 | dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); |
1da177e4 LT |
1345 | return room; |
1346 | } | |
1347 | ||
1348 | ||
1349 | /***************************************************************************** | |
1350 | * edge_chars_in_buffer | |
03f0dbf7 AC |
1351 | * this function is called by the tty driver when it wants to know how |
1352 | * many bytes of data we currently have outstanding in the port (data that | |
1353 | * has been written, but hasn't made it out the port yet) | |
1354 | * If successful, we return the number of bytes left to be written in the | |
1355 | * system, | |
1da177e4 LT |
1356 | * Otherwise we return a negative error number. |
1357 | *****************************************************************************/ | |
95da310e | 1358 | static int edge_chars_in_buffer(struct tty_struct *tty) |
1da177e4 | 1359 | { |
95da310e | 1360 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 LT |
1361 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1362 | int num_chars; | |
1363 | unsigned long flags; | |
1364 | ||
1da177e4 | 1365 | if (edge_port == NULL) |
d76f2f44 | 1366 | return 0; |
cb8eaa8b | 1367 | if (edge_port->closePending) |
d76f2f44 | 1368 | return 0; |
1da177e4 LT |
1369 | |
1370 | if (!edge_port->open) { | |
984f6868 | 1371 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
d76f2f44 | 1372 | return 0; |
1da177e4 LT |
1373 | } |
1374 | ||
1375 | spin_lock_irqsave(&edge_port->ep_lock, flags); | |
03f0dbf7 AC |
1376 | num_chars = edge_port->maxTxCredits - edge_port->txCredits + |
1377 | edge_port->txfifo.count; | |
1da177e4 LT |
1378 | spin_unlock_irqrestore(&edge_port->ep_lock, flags); |
1379 | if (num_chars) { | |
984f6868 GKH |
1380 | dev_dbg(&port->dev, "%s(port %d) - returns %d\n", __func__, |
1381 | port->number, num_chars); | |
1da177e4 LT |
1382 | } |
1383 | ||
1384 | return num_chars; | |
1385 | } | |
1386 | ||
1387 | ||
1388 | /***************************************************************************** | |
1389 | * SerialThrottle | |
1390 | * this function is called by the tty driver when it wants to stop the data | |
1391 | * being read from the port. | |
1392 | *****************************************************************************/ | |
95da310e | 1393 | static void edge_throttle(struct tty_struct *tty) |
1da177e4 | 1394 | { |
95da310e | 1395 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 | 1396 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1da177e4 LT |
1397 | int status; |
1398 | ||
1da177e4 LT |
1399 | if (edge_port == NULL) |
1400 | return; | |
1401 | ||
1402 | if (!edge_port->open) { | |
984f6868 | 1403 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
1da177e4 LT |
1404 | return; |
1405 | } | |
1406 | ||
1da177e4 LT |
1407 | /* if we are implementing XON/XOFF, send the stop character */ |
1408 | if (I_IXOFF(tty)) { | |
1409 | unsigned char stop_char = STOP_CHAR(tty); | |
03f0dbf7 AC |
1410 | status = edge_write(tty, port, &stop_char, 1); |
1411 | if (status <= 0) | |
1da177e4 | 1412 | return; |
1da177e4 LT |
1413 | } |
1414 | ||
1415 | /* if we are implementing RTS/CTS, toggle that line */ | |
adc8d746 | 1416 | if (tty->termios.c_cflag & CRTSCTS) { |
1da177e4 | 1417 | edge_port->shadowMCR &= ~MCR_RTS; |
03f0dbf7 AC |
1418 | status = send_cmd_write_uart_register(edge_port, MCR, |
1419 | edge_port->shadowMCR); | |
1420 | if (status != 0) | |
1da177e4 | 1421 | return; |
1da177e4 | 1422 | } |
1da177e4 LT |
1423 | } |
1424 | ||
1425 | ||
1426 | /***************************************************************************** | |
1427 | * edge_unthrottle | |
03f0dbf7 AC |
1428 | * this function is called by the tty driver when it wants to resume the |
1429 | * data being read from the port (called after SerialThrottle is called) | |
1da177e4 | 1430 | *****************************************************************************/ |
95da310e | 1431 | static void edge_unthrottle(struct tty_struct *tty) |
1da177e4 | 1432 | { |
95da310e | 1433 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 | 1434 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1da177e4 LT |
1435 | int status; |
1436 | ||
1da177e4 LT |
1437 | if (edge_port == NULL) |
1438 | return; | |
1439 | ||
1440 | if (!edge_port->open) { | |
984f6868 | 1441 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
1da177e4 LT |
1442 | return; |
1443 | } | |
1444 | ||
1da177e4 LT |
1445 | /* if we are implementing XON/XOFF, send the start character */ |
1446 | if (I_IXOFF(tty)) { | |
1447 | unsigned char start_char = START_CHAR(tty); | |
95da310e AC |
1448 | status = edge_write(tty, port, &start_char, 1); |
1449 | if (status <= 0) | |
1da177e4 | 1450 | return; |
1da177e4 | 1451 | } |
1da177e4 | 1452 | /* if we are implementing RTS/CTS, toggle that line */ |
adc8d746 | 1453 | if (tty->termios.c_cflag & CRTSCTS) { |
1da177e4 | 1454 | edge_port->shadowMCR |= MCR_RTS; |
03f0dbf7 AC |
1455 | send_cmd_write_uart_register(edge_port, MCR, |
1456 | edge_port->shadowMCR); | |
1da177e4 | 1457 | } |
1da177e4 LT |
1458 | } |
1459 | ||
1460 | ||
1461 | /***************************************************************************** | |
1462 | * SerialSetTermios | |
03f0dbf7 AC |
1463 | * this function is called by the tty driver when it wants to change |
1464 | * the termios structure | |
1da177e4 | 1465 | *****************************************************************************/ |
95da310e AC |
1466 | static void edge_set_termios(struct tty_struct *tty, |
1467 | struct usb_serial_port *port, struct ktermios *old_termios) | |
1da177e4 LT |
1468 | { |
1469 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); | |
1da177e4 LT |
1470 | unsigned int cflag; |
1471 | ||
adc8d746 | 1472 | cflag = tty->termios.c_cflag; |
d9a80746 | 1473 | dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, tty->termios.c_cflag, tty->termios.c_iflag); |
984f6868 | 1474 | dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag); |
1da177e4 LT |
1475 | |
1476 | if (edge_port == NULL) | |
1477 | return; | |
1478 | ||
1479 | if (!edge_port->open) { | |
984f6868 | 1480 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
1da177e4 LT |
1481 | return; |
1482 | } | |
1483 | ||
1484 | /* change the port settings to the new ones specified */ | |
95da310e | 1485 | change_port_settings(tty, edge_port, old_termios); |
1da177e4 LT |
1486 | } |
1487 | ||
1488 | ||
1489 | /***************************************************************************** | |
1490 | * get_lsr_info - get line status register info | |
1491 | * | |
1492 | * Purpose: Let user call ioctl() to get info when the UART physically | |
1493 | * is emptied. On bus types like RS485, the transmitter must | |
1494 | * release the bus after transmitting. This must be done when | |
1495 | * the transmit shift register is empty, not be done when the | |
1496 | * transmit holding register is empty. This functionality | |
03f0dbf7 | 1497 | * allows an RS485 driver to be written in user space. |
1da177e4 | 1498 | *****************************************************************************/ |
03f0dbf7 AC |
1499 | static int get_lsr_info(struct edgeport_port *edge_port, |
1500 | unsigned int __user *value) | |
1da177e4 LT |
1501 | { |
1502 | unsigned int result = 0; | |
1503 | unsigned long flags; | |
1504 | ||
1505 | spin_lock_irqsave(&edge_port->ep_lock, flags); | |
1506 | if (edge_port->maxTxCredits == edge_port->txCredits && | |
1507 | edge_port->txfifo.count == 0) { | |
984f6868 | 1508 | dev_dbg(&edge_port->port->dev, "%s -- Empty\n", __func__); |
1da177e4 LT |
1509 | result = TIOCSER_TEMT; |
1510 | } | |
1511 | spin_unlock_irqrestore(&edge_port->ep_lock, flags); | |
1512 | ||
1513 | if (copy_to_user(value, &result, sizeof(int))) | |
1514 | return -EFAULT; | |
1515 | return 0; | |
1516 | } | |
1517 | ||
20b9d177 | 1518 | static int edge_tiocmset(struct tty_struct *tty, |
03f0dbf7 | 1519 | unsigned int set, unsigned int clear) |
1da177e4 | 1520 | { |
95da310e | 1521 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 LT |
1522 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1523 | unsigned int mcr; | |
1524 | ||
1da177e4 LT |
1525 | mcr = edge_port->shadowMCR; |
1526 | if (set & TIOCM_RTS) | |
1527 | mcr |= MCR_RTS; | |
1528 | if (set & TIOCM_DTR) | |
1529 | mcr |= MCR_DTR; | |
1530 | if (set & TIOCM_LOOP) | |
1531 | mcr |= MCR_LOOPBACK; | |
1532 | ||
1533 | if (clear & TIOCM_RTS) | |
1534 | mcr &= ~MCR_RTS; | |
1535 | if (clear & TIOCM_DTR) | |
1536 | mcr &= ~MCR_DTR; | |
1537 | if (clear & TIOCM_LOOP) | |
1538 | mcr &= ~MCR_LOOPBACK; | |
1539 | ||
1540 | edge_port->shadowMCR = mcr; | |
1541 | ||
1542 | send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); | |
1543 | ||
1544 | return 0; | |
1545 | } | |
1546 | ||
60b33c13 | 1547 | static int edge_tiocmget(struct tty_struct *tty) |
1da177e4 | 1548 | { |
95da310e | 1549 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 LT |
1550 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
1551 | unsigned int result = 0; | |
1552 | unsigned int msr; | |
1553 | unsigned int mcr; | |
1554 | ||
1da177e4 LT |
1555 | msr = edge_port->shadowMSR; |
1556 | mcr = edge_port->shadowMCR; | |
1557 | result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ | |
1558 | | ((mcr & MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */ | |
1559 | | ((msr & EDGEPORT_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */ | |
1560 | | ((msr & EDGEPORT_MSR_CD) ? TIOCM_CAR: 0) /* 0x040 */ | |
1561 | | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ | |
1562 | | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ | |
1563 | ||
1da177e4 LT |
1564 | return result; |
1565 | } | |
1566 | ||
03f0dbf7 AC |
1567 | static int get_serial_info(struct edgeport_port *edge_port, |
1568 | struct serial_struct __user *retinfo) | |
1da177e4 LT |
1569 | { |
1570 | struct serial_struct tmp; | |
1571 | ||
1572 | if (!retinfo) | |
1573 | return -EFAULT; | |
1574 | ||
1575 | memset(&tmp, 0, sizeof(tmp)); | |
1576 | ||
1577 | tmp.type = PORT_16550A; | |
1578 | tmp.line = edge_port->port->serial->minor; | |
1579 | tmp.port = edge_port->port->number; | |
1580 | tmp.irq = 0; | |
1581 | tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; | |
1582 | tmp.xmit_fifo_size = edge_port->maxTxCredits; | |
1583 | tmp.baud_base = 9600; | |
1584 | tmp.close_delay = 5*HZ; | |
1585 | tmp.closing_wait = 30*HZ; | |
1da177e4 LT |
1586 | |
1587 | if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) | |
1588 | return -EFAULT; | |
1589 | return 0; | |
1590 | } | |
1591 | ||
1592 | ||
1da177e4 LT |
1593 | /***************************************************************************** |
1594 | * SerialIoctl | |
1595 | * this function handles any ioctl calls to the driver | |
1596 | *****************************************************************************/ | |
00a0d0d6 | 1597 | static int edge_ioctl(struct tty_struct *tty, |
95da310e | 1598 | unsigned int cmd, unsigned long arg) |
1da177e4 | 1599 | { |
95da310e | 1600 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 LT |
1601 | DEFINE_WAIT(wait); |
1602 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); | |
1da177e4 | 1603 | |
984f6868 | 1604 | dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); |
1da177e4 LT |
1605 | |
1606 | switch (cmd) { | |
03f0dbf7 | 1607 | case TIOCSERGETLSR: |
984f6868 | 1608 | dev_dbg(&port->dev, "%s (%d) TIOCSERGETLSR\n", __func__, port->number); |
03f0dbf7 AC |
1609 | return get_lsr_info(edge_port, (unsigned int __user *) arg); |
1610 | ||
1611 | case TIOCGSERIAL: | |
984f6868 | 1612 | dev_dbg(&port->dev, "%s (%d) TIOCGSERIAL\n", __func__, port->number); |
03f0dbf7 | 1613 | return get_serial_info(edge_port, (struct serial_struct __user *) arg); |
1da177e4 | 1614 | } |
1da177e4 LT |
1615 | return -ENOIOCTLCMD; |
1616 | } | |
1617 | ||
1618 | ||
1619 | /***************************************************************************** | |
1620 | * SerialBreak | |
1621 | * this function sends a break to the port | |
1622 | *****************************************************************************/ | |
03f0dbf7 | 1623 | static void edge_break(struct tty_struct *tty, int break_state) |
1da177e4 | 1624 | { |
95da310e | 1625 | struct usb_serial_port *port = tty->driver_data; |
1da177e4 | 1626 | struct edgeport_port *edge_port = usb_get_serial_port_data(port); |
6e8cf775 | 1627 | struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial); |
1da177e4 LT |
1628 | int status; |
1629 | ||
6e8cf775 GKH |
1630 | if ((!edge_serial->is_epic) || |
1631 | ((edge_serial->is_epic) && | |
1632 | (edge_serial->epic_descriptor.Supports.IOSPChase))) { | |
1633 | /* flush and chase */ | |
cb8eaa8b | 1634 | edge_port->chaseResponsePending = true; |
6e8cf775 | 1635 | |
984f6868 | 1636 | dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); |
03f0dbf7 | 1637 | status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); |
6e8cf775 | 1638 | if (status == 0) { |
03f0dbf7 | 1639 | /* block until chase finished */ |
6e8cf775 GKH |
1640 | block_until_chase_response(edge_port); |
1641 | } else { | |
cb8eaa8b | 1642 | edge_port->chaseResponsePending = false; |
6e8cf775 | 1643 | } |
1da177e4 LT |
1644 | } |
1645 | ||
6e8cf775 GKH |
1646 | if ((!edge_serial->is_epic) || |
1647 | ((edge_serial->is_epic) && | |
1648 | (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) { | |
1649 | if (break_state == -1) { | |
984f6868 | 1650 | dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__); |
03f0dbf7 AC |
1651 | status = send_iosp_ext_cmd(edge_port, |
1652 | IOSP_CMD_SET_BREAK, 0); | |
6e8cf775 | 1653 | } else { |
984f6868 | 1654 | dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLEAR_BREAK\n", __func__); |
03f0dbf7 AC |
1655 | status = send_iosp_ext_cmd(edge_port, |
1656 | IOSP_CMD_CLEAR_BREAK, 0); | |
6e8cf775 | 1657 | } |
03f0dbf7 | 1658 | if (status) |
984f6868 | 1659 | dev_dbg(&port->dev, "%s - error sending break set/clear command.\n", |
03f0dbf7 | 1660 | __func__); |
1da177e4 | 1661 | } |
1da177e4 LT |
1662 | } |
1663 | ||
1664 | ||
1665 | /***************************************************************************** | |
1666 | * process_rcvd_data | |
1667 | * this function handles the data received on the bulk in pipe. | |
1668 | *****************************************************************************/ | |
03f0dbf7 AC |
1669 | static void process_rcvd_data(struct edgeport_serial *edge_serial, |
1670 | unsigned char *buffer, __u16 bufferLength) | |
1da177e4 | 1671 | { |
984f6868 | 1672 | struct device *dev = &edge_serial->serial->dev->dev; |
1da177e4 LT |
1673 | struct usb_serial_port *port; |
1674 | struct edgeport_port *edge_port; | |
1da177e4 LT |
1675 | __u16 lastBufferLength; |
1676 | __u16 rxLen; | |
1677 | ||
1da177e4 LT |
1678 | lastBufferLength = bufferLength + 1; |
1679 | ||
1680 | while (bufferLength > 0) { | |
1681 | /* failsafe incase we get a message that we don't understand */ | |
1682 | if (lastBufferLength == bufferLength) { | |
984f6868 | 1683 | dev_dbg(dev, "%s - stuck in loop, exiting it.\n", __func__); |
1da177e4 LT |
1684 | break; |
1685 | } | |
1686 | lastBufferLength = bufferLength; | |
1687 | ||
1688 | switch (edge_serial->rxState) { | |
03f0dbf7 AC |
1689 | case EXPECT_HDR1: |
1690 | edge_serial->rxHeader1 = *buffer; | |
1691 | ++buffer; | |
1692 | --bufferLength; | |
1da177e4 | 1693 | |
03f0dbf7 AC |
1694 | if (bufferLength == 0) { |
1695 | edge_serial->rxState = EXPECT_HDR2; | |
1696 | break; | |
1697 | } | |
1698 | /* otherwise, drop on through */ | |
1699 | case EXPECT_HDR2: | |
1700 | edge_serial->rxHeader2 = *buffer; | |
1701 | ++buffer; | |
1702 | --bufferLength; | |
1703 | ||
984f6868 GKH |
1704 | dev_dbg(dev, "%s - Hdr1=%02X Hdr2=%02X\n", __func__, |
1705 | edge_serial->rxHeader1, edge_serial->rxHeader2); | |
03f0dbf7 AC |
1706 | /* Process depending on whether this header is |
1707 | * data or status */ | |
1708 | ||
1709 | if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) { | |
1710 | /* Decode this status header and go to | |
1711 | * EXPECT_HDR1 (if we can process the status | |
1712 | * with only 2 bytes), or go to EXPECT_HDR3 to | |
1713 | * get the third byte. */ | |
1714 | edge_serial->rxPort = | |
1715 | IOSP_GET_HDR_PORT(edge_serial->rxHeader1); | |
1716 | edge_serial->rxStatusCode = | |
1717 | IOSP_GET_STATUS_CODE( | |
1718 | edge_serial->rxHeader1); | |
1719 | ||
1720 | if (!IOSP_STATUS_IS_2BYTE( | |
1721 | edge_serial->rxStatusCode)) { | |
1722 | /* This status needs additional bytes. | |
1723 | * Save what we have and then wait for | |
1724 | * more data. | |
1725 | */ | |
1726 | edge_serial->rxStatusParam | |
1727 | = edge_serial->rxHeader2; | |
1728 | edge_serial->rxState = EXPECT_HDR3; | |
1da177e4 LT |
1729 | break; |
1730 | } | |
03f0dbf7 AC |
1731 | /* We have all the header bytes, process the |
1732 | status now */ | |
1733 | process_rcvd_status(edge_serial, | |
1734 | edge_serial->rxHeader2, 0); | |
1735 | edge_serial->rxState = EXPECT_HDR1; | |
1736 | break; | |
1737 | } else { | |
1738 | edge_serial->rxPort = | |
1739 | IOSP_GET_HDR_PORT(edge_serial->rxHeader1); | |
1740 | edge_serial->rxBytesRemaining = | |
1741 | IOSP_GET_HDR_DATA_LEN( | |
1742 | edge_serial->rxHeader1, | |
1743 | edge_serial->rxHeader2); | |
984f6868 GKH |
1744 | dev_dbg(dev, "%s - Data for Port %u Len %u\n", |
1745 | __func__, | |
1746 | edge_serial->rxPort, | |
1747 | edge_serial->rxBytesRemaining); | |
03f0dbf7 AC |
1748 | |
1749 | /* ASSERT(DevExt->RxPort < DevExt->NumPorts); | |
1750 | * ASSERT(DevExt->RxBytesRemaining < | |
1751 | * IOSP_MAX_DATA_LENGTH); | |
1752 | */ | |
1da177e4 | 1753 | |
03f0dbf7 AC |
1754 | if (bufferLength == 0) { |
1755 | edge_serial->rxState = EXPECT_DATA; | |
1da177e4 | 1756 | break; |
1da177e4 | 1757 | } |
03f0dbf7 AC |
1758 | /* Else, drop through */ |
1759 | } | |
1760 | case EXPECT_DATA: /* Expect data */ | |
1761 | if (bufferLength < edge_serial->rxBytesRemaining) { | |
1762 | rxLen = bufferLength; | |
1763 | /* Expect data to start next buffer */ | |
1764 | edge_serial->rxState = EXPECT_DATA; | |
1765 | } else { | |
1766 | /* BufLen >= RxBytesRemaining */ | |
1767 | rxLen = edge_serial->rxBytesRemaining; | |
1768 | /* Start another header next time */ | |
1769 | edge_serial->rxState = EXPECT_HDR1; | |
1770 | } | |
1da177e4 | 1771 | |
03f0dbf7 AC |
1772 | bufferLength -= rxLen; |
1773 | edge_serial->rxBytesRemaining -= rxLen; | |
1da177e4 | 1774 | |
03f0dbf7 AC |
1775 | /* spit this data back into the tty driver if this |
1776 | port is open */ | |
1777 | if (rxLen) { | |
1778 | port = edge_serial->serial->port[ | |
1779 | edge_serial->rxPort]; | |
1780 | edge_port = usb_get_serial_port_data(port); | |
1781 | if (edge_port->open) { | |
2e124b4a JS |
1782 | dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", |
1783 | __func__, rxLen, | |
1784 | edge_serial->rxPort); | |
1785 | edge_tty_recv(edge_port->port, buffer, | |
1786 | rxLen); | |
d36a7712 | 1787 | edge_port->port->icount.rx += rxLen; |
1da177e4 | 1788 | } |
03f0dbf7 AC |
1789 | buffer += rxLen; |
1790 | } | |
1791 | break; | |
1da177e4 | 1792 | |
03f0dbf7 AC |
1793 | case EXPECT_HDR3: /* Expect 3rd byte of status header */ |
1794 | edge_serial->rxHeader3 = *buffer; | |
1795 | ++buffer; | |
1796 | --bufferLength; | |
1797 | ||
1798 | /* We have all the header bytes, process the | |
1799 | status now */ | |
1800 | process_rcvd_status(edge_serial, | |
1801 | edge_serial->rxStatusParam, | |
1802 | edge_serial->rxHeader3); | |
1803 | edge_serial->rxState = EXPECT_HDR1; | |
1804 | break; | |
1da177e4 LT |
1805 | } |
1806 | } | |
1807 | } | |
1808 | ||
1809 | ||
1810 | /***************************************************************************** | |
1811 | * process_rcvd_status | |
03f0dbf7 AC |
1812 | * this function handles the any status messages received on the |
1813 | * bulk in pipe. | |
1da177e4 | 1814 | *****************************************************************************/ |
03f0dbf7 AC |
1815 | static void process_rcvd_status(struct edgeport_serial *edge_serial, |
1816 | __u8 byte2, __u8 byte3) | |
1da177e4 LT |
1817 | { |
1818 | struct usb_serial_port *port; | |
1819 | struct edgeport_port *edge_port; | |
4a90f09b | 1820 | struct tty_struct *tty; |
984f6868 | 1821 | struct device *dev; |
1da177e4 LT |
1822 | __u8 code = edge_serial->rxStatusCode; |
1823 | ||
1824 | /* switch the port pointer to the one being currently talked about */ | |
1825 | port = edge_serial->serial->port[edge_serial->rxPort]; | |
1826 | edge_port = usb_get_serial_port_data(port); | |
1827 | if (edge_port == NULL) { | |
03f0dbf7 AC |
1828 | dev_err(&edge_serial->serial->dev->dev, |
1829 | "%s - edge_port == NULL for port %d\n", | |
1830 | __func__, edge_serial->rxPort); | |
1da177e4 LT |
1831 | return; |
1832 | } | |
984f6868 | 1833 | dev = &port->dev; |
1da177e4 LT |
1834 | |
1835 | if (code == IOSP_EXT_STATUS) { | |
1836 | switch (byte2) { | |
03f0dbf7 AC |
1837 | case IOSP_EXT_STATUS_CHASE_RSP: |
1838 | /* we want to do EXT status regardless of port | |
1839 | * open/closed */ | |
984f6868 GKH |
1840 | dev_dbg(dev, "%s - Port %u EXT CHASE_RSP Data = %02x\n", |
1841 | __func__, edge_serial->rxPort, byte3); | |
03f0dbf7 AC |
1842 | /* Currently, the only EXT_STATUS is Chase, so process |
1843 | * here instead of one more call to one more subroutine | |
1844 | * If/when more EXT_STATUS, there'll be more work to do | |
1845 | * Also, we currently clear flag and close the port | |
1846 | * regardless of content of above's Byte3. | |
1847 | * We could choose to do something else when Byte3 says | |
1848 | * Timeout on Chase from Edgeport, like wait longer in | |
1849 | * block_until_chase_response, but for now we don't. | |
1850 | */ | |
1851 | edge_port->chaseResponsePending = false; | |
1852 | wake_up(&edge_port->wait_chase); | |
1853 | return; | |
1da177e4 | 1854 | |
03f0dbf7 | 1855 | case IOSP_EXT_STATUS_RX_CHECK_RSP: |
984f6868 GKH |
1856 | dev_dbg(dev, "%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", |
1857 | __func__, edge_serial->rxPort, byte3); | |
03f0dbf7 AC |
1858 | /* Port->RxCheckRsp = true; */ |
1859 | return; | |
1da177e4 LT |
1860 | } |
1861 | } | |
1862 | ||
1863 | if (code == IOSP_STATUS_OPEN_RSP) { | |
1864 | edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3); | |
1865 | edge_port->maxTxCredits = edge_port->txCredits; | |
984f6868 GKH |
1866 | dev_dbg(dev, "%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d\n", |
1867 | __func__, edge_serial->rxPort, byte2, edge_port->txCredits); | |
03f0dbf7 | 1868 | handle_new_msr(edge_port, byte2); |
1da177e4 | 1869 | |
03f0dbf7 AC |
1870 | /* send the current line settings to the port so we are |
1871 | in sync with any further termios calls */ | |
4a90f09b AC |
1872 | tty = tty_port_tty_get(&edge_port->port->port); |
1873 | if (tty) { | |
1874 | change_port_settings(tty, | |
adc8d746 | 1875 | edge_port, &tty->termios); |
4a90f09b AC |
1876 | tty_kref_put(tty); |
1877 | } | |
1da177e4 LT |
1878 | |
1879 | /* we have completed the open */ | |
cb8eaa8b RK |
1880 | edge_port->openPending = false; |
1881 | edge_port->open = true; | |
1da177e4 LT |
1882 | wake_up(&edge_port->wait_open); |
1883 | return; | |
1884 | } | |
1885 | ||
03f0dbf7 AC |
1886 | /* If port is closed, silently discard all rcvd status. We can |
1887 | * have cases where buffered status is received AFTER the close | |
1888 | * port command is sent to the Edgeport. | |
1889 | */ | |
1890 | if (!edge_port->open || edge_port->closePending) | |
1da177e4 | 1891 | return; |
1da177e4 LT |
1892 | |
1893 | switch (code) { | |
03f0dbf7 AC |
1894 | /* Not currently sent by Edgeport */ |
1895 | case IOSP_STATUS_LSR: | |
984f6868 GKH |
1896 | dev_dbg(dev, "%s - Port %u LSR Status = %02x\n", |
1897 | __func__, edge_serial->rxPort, byte2); | |
03f0dbf7 AC |
1898 | handle_new_lsr(edge_port, false, byte2, 0); |
1899 | break; | |
1da177e4 | 1900 | |
03f0dbf7 | 1901 | case IOSP_STATUS_LSR_DATA: |
984f6868 GKH |
1902 | dev_dbg(dev, "%s - Port %u LSR Status = %02x, Data = %02x\n", |
1903 | __func__, edge_serial->rxPort, byte2, byte3); | |
03f0dbf7 AC |
1904 | /* byte2 is LSR Register */ |
1905 | /* byte3 is broken data byte */ | |
1906 | handle_new_lsr(edge_port, true, byte2, byte3); | |
1907 | break; | |
1908 | /* | |
1909 | * case IOSP_EXT_4_STATUS: | |
984f6868 | 1910 | * dev_dbg(dev, "%s - Port %u LSR Status = %02x Data = %02x\n", |
03f0dbf7 AC |
1911 | * __func__, edge_serial->rxPort, byte2, byte3); |
1912 | * break; | |
1913 | */ | |
1914 | case IOSP_STATUS_MSR: | |
984f6868 GKH |
1915 | dev_dbg(dev, "%s - Port %u MSR Status = %02x\n", |
1916 | __func__, edge_serial->rxPort, byte2); | |
03f0dbf7 AC |
1917 | /* |
1918 | * Process this new modem status and generate appropriate | |
1919 | * events, etc, based on the new status. This routine | |
1920 | * also saves the MSR in Port->ShadowMsr. | |
1921 | */ | |
1922 | handle_new_msr(edge_port, byte2); | |
1923 | break; | |
1da177e4 | 1924 | |
03f0dbf7 | 1925 | default: |
984f6868 | 1926 | dev_dbg(dev, "%s - Unrecognized IOSP status code %u\n", __func__, code); |
03f0dbf7 | 1927 | break; |
1da177e4 | 1928 | } |
1da177e4 LT |
1929 | } |
1930 | ||
1931 | ||
1932 | /***************************************************************************** | |
1933 | * edge_tty_recv | |
1934 | * this function passes data on to the tty flip buffer | |
1935 | *****************************************************************************/ | |
2e124b4a JS |
1936 | static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, |
1937 | int length) | |
1da177e4 LT |
1938 | { |
1939 | int cnt; | |
1940 | ||
05c7cd39 | 1941 | cnt = tty_insert_flip_string(&port->port, data, length); |
a108bfcb | 1942 | if (cnt < length) { |
05c7cd39 | 1943 | dev_err(&port->dev, "%s - dropping data, %d bytes lost\n", |
a108bfcb AC |
1944 | __func__, length - cnt); |
1945 | } | |
1946 | data += cnt; | |
1947 | length -= cnt; | |
1da177e4 | 1948 | |
2e124b4a | 1949 | tty_flip_buffer_push(&port->port); |
1da177e4 LT |
1950 | } |
1951 | ||
1952 | ||
1953 | /***************************************************************************** | |
1954 | * handle_new_msr | |
1955 | * this function handles any change to the msr register for a port. | |
1956 | *****************************************************************************/ | |
1957 | static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) | |
1958 | { | |
1959 | struct async_icount *icount; | |
1960 | ||
03f0dbf7 AC |
1961 | if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | |
1962 | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { | |
d36a7712 | 1963 | icount = &edge_port->port->icount; |
1da177e4 LT |
1964 | |
1965 | /* update input line counters */ | |
03f0dbf7 | 1966 | if (newMsr & EDGEPORT_MSR_DELTA_CTS) |
1da177e4 | 1967 | icount->cts++; |
03f0dbf7 | 1968 | if (newMsr & EDGEPORT_MSR_DELTA_DSR) |
1da177e4 | 1969 | icount->dsr++; |
03f0dbf7 | 1970 | if (newMsr & EDGEPORT_MSR_DELTA_CD) |
1da177e4 | 1971 | icount->dcd++; |
03f0dbf7 | 1972 | if (newMsr & EDGEPORT_MSR_DELTA_RI) |
1da177e4 | 1973 | icount->rng++; |
8b8070d8 | 1974 | wake_up_interruptible(&edge_port->port->port.delta_msr_wait); |
1da177e4 LT |
1975 | } |
1976 | ||
1977 | /* Save the new modem status */ | |
1978 | edge_port->shadowMSR = newMsr & 0xf0; | |
1da177e4 LT |
1979 | } |
1980 | ||
1981 | ||
1982 | /***************************************************************************** | |
1983 | * handle_new_lsr | |
1984 | * this function handles any change to the lsr register for a port. | |
1985 | *****************************************************************************/ | |
03f0dbf7 AC |
1986 | static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, |
1987 | __u8 lsr, __u8 data) | |
1da177e4 | 1988 | { |
03f0dbf7 AC |
1989 | __u8 newLsr = (__u8) (lsr & (__u8) |
1990 | (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); | |
1991 | struct async_icount *icount; | |
1da177e4 | 1992 | |
1da177e4 LT |
1993 | edge_port->shadowLSR = lsr; |
1994 | ||
1995 | if (newLsr & LSR_BREAK) { | |
03f0dbf7 AC |
1996 | /* |
1997 | * Parity and Framing errors only count if they | |
1998 | * occur exclusive of a break being | |
1999 | * received. | |
2000 | */ | |
1da177e4 LT |
2001 | newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); |
2002 | } | |
2003 | ||
2004 | /* Place LSR data byte into Rx buffer */ | |
2e124b4a JS |
2005 | if (lsrData) |
2006 | edge_tty_recv(edge_port->port, &data, 1); | |
2007 | ||
1da177e4 | 2008 | /* update input line counters */ |
d36a7712 | 2009 | icount = &edge_port->port->icount; |
03f0dbf7 | 2010 | if (newLsr & LSR_BREAK) |
1da177e4 | 2011 | icount->brk++; |
03f0dbf7 | 2012 | if (newLsr & LSR_OVER_ERR) |
1da177e4 | 2013 | icount->overrun++; |
03f0dbf7 | 2014 | if (newLsr & LSR_PAR_ERR) |
1da177e4 | 2015 | icount->parity++; |
03f0dbf7 | 2016 | if (newLsr & LSR_FRM_ERR) |
1da177e4 | 2017 | icount->frame++; |
1da177e4 LT |
2018 | } |
2019 | ||
2020 | ||
2021 | /**************************************************************************** | |
2022 | * sram_write | |
03f0dbf7 | 2023 | * writes a number of bytes to the Edgeport device's sram starting at the |
1da177e4 LT |
2024 | * given address. |
2025 | * If successful returns the number of bytes written, otherwise it returns | |
2026 | * a negative error number of the problem. | |
2027 | ****************************************************************************/ | |
03f0dbf7 AC |
2028 | static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, |
2029 | __u16 length, const __u8 *data) | |
1da177e4 LT |
2030 | { |
2031 | int result; | |
2032 | __u16 current_length; | |
2033 | unsigned char *transfer_buffer; | |
2034 | ||
984f6868 | 2035 | dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length); |
1da177e4 | 2036 | |
03f0dbf7 | 2037 | transfer_buffer = kmalloc(64, GFP_KERNEL); |
1da177e4 | 2038 | if (!transfer_buffer) { |
03f0dbf7 AC |
2039 | dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", |
2040 | __func__, 64); | |
1da177e4 LT |
2041 | return -ENOMEM; |
2042 | } | |
2043 | ||
2044 | /* need to split these writes up into 64 byte chunks */ | |
2045 | result = 0; | |
2046 | while (length > 0) { | |
03f0dbf7 | 2047 | if (length > 64) |
1da177e4 | 2048 | current_length = 64; |
03f0dbf7 | 2049 | else |
1da177e4 | 2050 | current_length = length; |
03f0dbf7 | 2051 | |
984f6868 | 2052 | /* dev_dbg(&serial->dev->dev, "%s - writing %x, %x, %d\n", __func__, extAddr, addr, current_length); */ |
03f0dbf7 AC |
2053 | memcpy(transfer_buffer, data, current_length); |
2054 | result = usb_control_msg(serial->dev, | |
2055 | usb_sndctrlpipe(serial->dev, 0), | |
2056 | USB_REQUEST_ION_WRITE_RAM, | |
2057 | 0x40, addr, extAddr, transfer_buffer, | |
2058 | current_length, 300); | |
1da177e4 LT |
2059 | if (result < 0) |
2060 | break; | |
2061 | length -= current_length; | |
2062 | addr += current_length; | |
2063 | data += current_length; | |
03f0dbf7 | 2064 | } |
1da177e4 | 2065 | |
03f0dbf7 | 2066 | kfree(transfer_buffer); |
1da177e4 LT |
2067 | return result; |
2068 | } | |
2069 | ||
2070 | ||
2071 | /**************************************************************************** | |
2072 | * rom_write | |
2073 | * writes a number of bytes to the Edgeport device's ROM starting at the | |
2074 | * given address. | |
2075 | * If successful returns the number of bytes written, otherwise it returns | |
2076 | * a negative error number of the problem. | |
2077 | ****************************************************************************/ | |
03f0dbf7 AC |
2078 | static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, |
2079 | __u16 length, const __u8 *data) | |
1da177e4 LT |
2080 | { |
2081 | int result; | |
2082 | __u16 current_length; | |
2083 | unsigned char *transfer_buffer; | |
2084 | ||
03f0dbf7 | 2085 | transfer_buffer = kmalloc(64, GFP_KERNEL); |
1da177e4 | 2086 | if (!transfer_buffer) { |
03f0dbf7 AC |
2087 | dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", |
2088 | __func__, 64); | |
1da177e4 LT |
2089 | return -ENOMEM; |
2090 | } | |
2091 | ||
2092 | /* need to split these writes up into 64 byte chunks */ | |
2093 | result = 0; | |
2094 | while (length > 0) { | |
03f0dbf7 | 2095 | if (length > 64) |
1da177e4 | 2096 | current_length = 64; |
03f0dbf7 | 2097 | else |
1da177e4 | 2098 | current_length = length; |
03f0dbf7 AC |
2099 | memcpy(transfer_buffer, data, current_length); |
2100 | result = usb_control_msg(serial->dev, | |
2101 | usb_sndctrlpipe(serial->dev, 0), | |
2102 | USB_REQUEST_ION_WRITE_ROM, 0x40, | |
2103 | addr, extAddr, | |
2104 | transfer_buffer, current_length, 300); | |
1da177e4 LT |
2105 | if (result < 0) |
2106 | break; | |
2107 | length -= current_length; | |
2108 | addr += current_length; | |
2109 | data += current_length; | |
03f0dbf7 | 2110 | } |
1da177e4 | 2111 | |
03f0dbf7 | 2112 | kfree(transfer_buffer); |
1da177e4 LT |
2113 | return result; |
2114 | } | |
2115 | ||
2116 | ||
2117 | /**************************************************************************** | |
2118 | * rom_read | |
2119 | * reads a number of bytes from the Edgeport device starting at the given | |
2120 | * address. | |
2121 | * If successful returns the number of bytes read, otherwise it returns | |
2122 | * a negative error number of the problem. | |
2123 | ****************************************************************************/ | |
03f0dbf7 AC |
2124 | static int rom_read(struct usb_serial *serial, __u16 extAddr, |
2125 | __u16 addr, __u16 length, __u8 *data) | |
1da177e4 LT |
2126 | { |
2127 | int result; | |
2128 | __u16 current_length; | |
2129 | unsigned char *transfer_buffer; | |
2130 | ||
03f0dbf7 | 2131 | transfer_buffer = kmalloc(64, GFP_KERNEL); |
1da177e4 | 2132 | if (!transfer_buffer) { |
03f0dbf7 AC |
2133 | dev_err(&serial->dev->dev, |
2134 | "%s - kmalloc(%d) failed.\n", __func__, 64); | |
1da177e4 LT |
2135 | return -ENOMEM; |
2136 | } | |
2137 | ||
2138 | /* need to split these reads up into 64 byte chunks */ | |
2139 | result = 0; | |
2140 | while (length > 0) { | |
03f0dbf7 | 2141 | if (length > 64) |
1da177e4 | 2142 | current_length = 64; |
03f0dbf7 | 2143 | else |
1da177e4 | 2144 | current_length = length; |
03f0dbf7 AC |
2145 | result = usb_control_msg(serial->dev, |
2146 | usb_rcvctrlpipe(serial->dev, 0), | |
2147 | USB_REQUEST_ION_READ_ROM, | |
2148 | 0xC0, addr, extAddr, transfer_buffer, | |
2149 | current_length, 300); | |
1da177e4 LT |
2150 | if (result < 0) |
2151 | break; | |
03f0dbf7 | 2152 | memcpy(data, transfer_buffer, current_length); |
1da177e4 LT |
2153 | length -= current_length; |
2154 | addr += current_length; | |
2155 | data += current_length; | |
03f0dbf7 | 2156 | } |
1da177e4 | 2157 | |
03f0dbf7 | 2158 | kfree(transfer_buffer); |
1da177e4 LT |
2159 | return result; |
2160 | } | |
2161 | ||
2162 | ||
2163 | /**************************************************************************** | |
2164 | * send_iosp_ext_cmd | |
2165 | * Is used to send a IOSP message to the Edgeport device | |
2166 | ****************************************************************************/ | |
03f0dbf7 AC |
2167 | static int send_iosp_ext_cmd(struct edgeport_port *edge_port, |
2168 | __u8 command, __u8 param) | |
1da177e4 LT |
2169 | { |
2170 | unsigned char *buffer; | |
2171 | unsigned char *currentCommand; | |
2172 | int length = 0; | |
2173 | int status = 0; | |
2174 | ||
03f0dbf7 | 2175 | buffer = kmalloc(10, GFP_ATOMIC); |
1da177e4 | 2176 | if (!buffer) { |
03f0dbf7 AC |
2177 | dev_err(&edge_port->port->dev, |
2178 | "%s - kmalloc(%d) failed.\n", __func__, 10); | |
1da177e4 LT |
2179 | return -ENOMEM; |
2180 | } | |
2181 | ||
2182 | currentCommand = buffer; | |
2183 | ||
03f0dbf7 AC |
2184 | MAKE_CMD_EXT_CMD(¤tCommand, &length, |
2185 | edge_port->port->number - edge_port->port->serial->minor, | |
2186 | command, param); | |
1da177e4 | 2187 | |
03f0dbf7 | 2188 | status = write_cmd_usb(edge_port, buffer, length); |
1da177e4 LT |
2189 | if (status) { |
2190 | /* something bad happened, let's free up the memory */ | |
2191 | kfree(buffer); | |
2192 | } | |
2193 | ||
2194 | return status; | |
2195 | } | |
2196 | ||
2197 | ||
2198 | /***************************************************************************** | |
2199 | * write_cmd_usb | |
2200 | * this function writes the given buffer out to the bulk write endpoint. | |
2201 | *****************************************************************************/ | |
03f0dbf7 AC |
2202 | static int write_cmd_usb(struct edgeport_port *edge_port, |
2203 | unsigned char *buffer, int length) | |
1da177e4 | 2204 | { |
03f0dbf7 AC |
2205 | struct edgeport_serial *edge_serial = |
2206 | usb_get_serial_data(edge_port->port->serial); | |
984f6868 | 2207 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
2208 | int status = 0; |
2209 | struct urb *urb; | |
1da177e4 | 2210 | |
59d33f2f | 2211 | usb_serial_debug_data(dev, __func__, length, buffer); |
1da177e4 LT |
2212 | |
2213 | /* Allocate our next urb */ | |
03f0dbf7 | 2214 | urb = usb_alloc_urb(0, GFP_ATOMIC); |
1da177e4 LT |
2215 | if (!urb) |
2216 | return -ENOMEM; | |
2217 | ||
96c706ed | 2218 | atomic_inc(&CmdUrbs); |
984f6868 GKH |
2219 | dev_dbg(dev, "%s - ALLOCATE URB %p (outstanding %d)\n", |
2220 | __func__, urb, atomic_read(&CmdUrbs)); | |
1da177e4 | 2221 | |
03f0dbf7 AC |
2222 | usb_fill_bulk_urb(urb, edge_serial->serial->dev, |
2223 | usb_sndbulkpipe(edge_serial->serial->dev, | |
2224 | edge_serial->bulk_out_endpoint), | |
2225 | buffer, length, edge_bulk_out_cmd_callback, edge_port); | |
1da177e4 | 2226 | |
cb8eaa8b | 2227 | edge_port->commandPending = true; |
1da177e4 LT |
2228 | status = usb_submit_urb(urb, GFP_ATOMIC); |
2229 | ||
2230 | if (status) { | |
2231 | /* something went wrong */ | |
984f6868 GKH |
2232 | dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n", |
2233 | __func__, status); | |
1da177e4 LT |
2234 | usb_kill_urb(urb); |
2235 | usb_free_urb(urb); | |
96c706ed | 2236 | atomic_dec(&CmdUrbs); |
1da177e4 LT |
2237 | return status; |
2238 | } | |
2239 | ||
1da177e4 | 2240 | #if 0 |
03f0dbf7 | 2241 | wait_event(&edge_port->wait_command, !edge_port->commandPending); |
1da177e4 | 2242 | |
cb8eaa8b | 2243 | if (edge_port->commandPending) { |
1da177e4 | 2244 | /* command timed out */ |
984f6868 | 2245 | dev_dbg(dev, "%s - command timed out\n", __func__); |
1da177e4 LT |
2246 | status = -EINVAL; |
2247 | } | |
2248 | #endif | |
2249 | return status; | |
2250 | } | |
2251 | ||
2252 | ||
2253 | /***************************************************************************** | |
2254 | * send_cmd_write_baud_rate | |
2255 | * this function sends the proper command to change the baud rate of the | |
2256 | * specified port. | |
2257 | *****************************************************************************/ | |
03f0dbf7 AC |
2258 | static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, |
2259 | int baudRate) | |
1da177e4 | 2260 | { |
03f0dbf7 AC |
2261 | struct edgeport_serial *edge_serial = |
2262 | usb_get_serial_data(edge_port->port->serial); | |
984f6868 | 2263 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
2264 | unsigned char *cmdBuffer; |
2265 | unsigned char *currCmd; | |
2266 | int cmdLen = 0; | |
2267 | int divisor; | |
2268 | int status; | |
03f0dbf7 AC |
2269 | unsigned char number = |
2270 | edge_port->port->number - edge_port->port->serial->minor; | |
1da177e4 | 2271 | |
bc71e479 AK |
2272 | if (edge_serial->is_epic && |
2273 | !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { | |
984f6868 GKH |
2274 | dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d\n", |
2275 | edge_port->port->number, baudRate); | |
6e8cf775 GKH |
2276 | return 0; |
2277 | } | |
2278 | ||
984f6868 GKH |
2279 | dev_dbg(dev, "%s - port = %d, baud = %d\n", __func__, |
2280 | edge_port->port->number, baudRate); | |
1da177e4 | 2281 | |
984f6868 | 2282 | status = calc_baud_rate_divisor(dev, baudRate, &divisor); |
1da177e4 | 2283 | if (status) { |
984f6868 | 2284 | dev_err(dev, "%s - bad baud rate\n", __func__); |
1da177e4 LT |
2285 | return status; |
2286 | } | |
2287 | ||
03f0dbf7 AC |
2288 | /* Alloc memory for the string of commands. */ |
2289 | cmdBuffer = kmalloc(0x100, GFP_ATOMIC); | |
1da177e4 | 2290 | if (!cmdBuffer) { |
984f6868 | 2291 | dev_err(dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100); |
1da177e4 LT |
2292 | return -ENOMEM; |
2293 | } | |
2294 | currCmd = cmdBuffer; | |
2295 | ||
03f0dbf7 AC |
2296 | /* Enable access to divisor latch */ |
2297 | MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE); | |
1da177e4 | 2298 | |
03f0dbf7 AC |
2299 | /* Write the divisor itself */ |
2300 | MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor)); | |
2301 | MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor)); | |
1da177e4 | 2302 | |
03f0dbf7 AC |
2303 | /* Restore original value to disable access to divisor latch */ |
2304 | MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, | |
2305 | edge_port->shadowLCR); | |
1da177e4 | 2306 | |
03f0dbf7 | 2307 | status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); |
1da177e4 LT |
2308 | if (status) { |
2309 | /* something bad happened, let's free up the memory */ | |
03f0dbf7 | 2310 | kfree(cmdBuffer); |
1da177e4 LT |
2311 | } |
2312 | ||
2313 | return status; | |
2314 | } | |
2315 | ||
2316 | ||
2317 | /***************************************************************************** | |
2318 | * calc_baud_rate_divisor | |
2319 | * this function calculates the proper baud rate divisor for the specified | |
2320 | * baud rate. | |
2321 | *****************************************************************************/ | |
984f6868 | 2322 | static int calc_baud_rate_divisor(struct device *dev, int baudrate, int *divisor) |
1da177e4 LT |
2323 | { |
2324 | int i; | |
2325 | __u16 custom; | |
2326 | ||
52950ed4 | 2327 | for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { |
03f0dbf7 | 2328 | if (divisor_table[i].BaudRate == baudrate) { |
1da177e4 LT |
2329 | *divisor = divisor_table[i].Divisor; |
2330 | return 0; | |
2331 | } | |
2332 | } | |
2333 | ||
03f0dbf7 AC |
2334 | /* We have tried all of the standard baud rates |
2335 | * lets try to calculate the divisor for this baud rate | |
2336 | * Make sure the baud rate is reasonable */ | |
1da177e4 | 2337 | if (baudrate > 50 && baudrate < 230400) { |
03f0dbf7 | 2338 | /* get divisor */ |
1da177e4 LT |
2339 | custom = (__u16)((230400L + baudrate/2) / baudrate); |
2340 | ||
2341 | *divisor = custom; | |
2342 | ||
984f6868 | 2343 | dev_dbg(dev, "%s - Baud %d = %d\n", __func__, baudrate, custom); |
1da177e4 LT |
2344 | return 0; |
2345 | } | |
2346 | ||
2347 | return -1; | |
2348 | } | |
2349 | ||
2350 | ||
2351 | /***************************************************************************** | |
2352 | * send_cmd_write_uart_register | |
fd589a8f | 2353 | * this function builds up a uart register message and sends to the device. |
1da177e4 | 2354 | *****************************************************************************/ |
03f0dbf7 AC |
2355 | static int send_cmd_write_uart_register(struct edgeport_port *edge_port, |
2356 | __u8 regNum, __u8 regValue) | |
1da177e4 | 2357 | { |
03f0dbf7 AC |
2358 | struct edgeport_serial *edge_serial = |
2359 | usb_get_serial_data(edge_port->port->serial); | |
984f6868 | 2360 | struct device *dev = &edge_port->port->dev; |
1da177e4 LT |
2361 | unsigned char *cmdBuffer; |
2362 | unsigned char *currCmd; | |
2363 | unsigned long cmdLen = 0; | |
2364 | int status; | |
2365 | ||
984f6868 GKH |
2366 | dev_dbg(dev, "%s - write to %s register 0x%02x\n", |
2367 | (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); | |
1da177e4 | 2368 | |
bc71e479 AK |
2369 | if (edge_serial->is_epic && |
2370 | !edge_serial->epic_descriptor.Supports.IOSPWriteMCR && | |
2371 | regNum == MCR) { | |
984f6868 | 2372 | dev_dbg(dev, "SendCmdWriteUartReg - Not writing to MCR Register\n"); |
6e8cf775 GKH |
2373 | return 0; |
2374 | } | |
2375 | ||
bc71e479 AK |
2376 | if (edge_serial->is_epic && |
2377 | !edge_serial->epic_descriptor.Supports.IOSPWriteLCR && | |
2378 | regNum == LCR) { | |
984f6868 | 2379 | dev_dbg(dev, "SendCmdWriteUartReg - Not writing to LCR Register\n"); |
6e8cf775 GKH |
2380 | return 0; |
2381 | } | |
2382 | ||
03f0dbf7 AC |
2383 | /* Alloc memory for the string of commands. */ |
2384 | cmdBuffer = kmalloc(0x10, GFP_ATOMIC); | |
2385 | if (cmdBuffer == NULL) | |
1da177e4 | 2386 | return -ENOMEM; |
1da177e4 LT |
2387 | |
2388 | currCmd = cmdBuffer; | |
2389 | ||
03f0dbf7 AC |
2390 | /* Build a cmd in the buffer to write the given register */ |
2391 | MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, | |
2392 | edge_port->port->number - edge_port->port->serial->minor, | |
2393 | regNum, regValue); | |
1da177e4 LT |
2394 | |
2395 | status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); | |
2396 | if (status) { | |
2397 | /* something bad happened, let's free up the memory */ | |
03f0dbf7 | 2398 | kfree(cmdBuffer); |
1da177e4 LT |
2399 | } |
2400 | ||
2401 | return status; | |
2402 | } | |
2403 | ||
2404 | ||
2405 | /***************************************************************************** | |
2406 | * change_port_settings | |
03f0dbf7 AC |
2407 | * This routine is called to set the UART on the device to match the |
2408 | * specified new settings. | |
1da177e4 | 2409 | *****************************************************************************/ |
95da310e AC |
2410 | |
2411 | static void change_port_settings(struct tty_struct *tty, | |
2412 | struct edgeport_port *edge_port, struct ktermios *old_termios) | |
1da177e4 | 2413 | { |
984f6868 | 2414 | struct device *dev = &edge_port->port->dev; |
03f0dbf7 AC |
2415 | struct edgeport_serial *edge_serial = |
2416 | usb_get_serial_data(edge_port->port->serial); | |
1da177e4 LT |
2417 | int baud; |
2418 | unsigned cflag; | |
2419 | __u8 mask = 0xff; | |
2420 | __u8 lData; | |
2421 | __u8 lParity; | |
2422 | __u8 lStop; | |
2423 | __u8 rxFlow; | |
2424 | __u8 txFlow; | |
2425 | int status; | |
2426 | ||
984f6868 | 2427 | dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number); |
1da177e4 | 2428 | |
cb8eaa8b RK |
2429 | if (!edge_port->open && |
2430 | !edge_port->openPending) { | |
984f6868 | 2431 | dev_dbg(dev, "%s - port not opened\n", __func__); |
1da177e4 LT |
2432 | return; |
2433 | } | |
2434 | ||
adc8d746 | 2435 | cflag = tty->termios.c_cflag; |
1da177e4 LT |
2436 | |
2437 | switch (cflag & CSIZE) { | |
03f0dbf7 AC |
2438 | case CS5: |
2439 | lData = LCR_BITS_5; mask = 0x1f; | |
984f6868 | 2440 | dev_dbg(dev, "%s - data bits = 5\n", __func__); |
03f0dbf7 AC |
2441 | break; |
2442 | case CS6: | |
2443 | lData = LCR_BITS_6; mask = 0x3f; | |
984f6868 | 2444 | dev_dbg(dev, "%s - data bits = 6\n", __func__); |
03f0dbf7 AC |
2445 | break; |
2446 | case CS7: | |
2447 | lData = LCR_BITS_7; mask = 0x7f; | |
984f6868 | 2448 | dev_dbg(dev, "%s - data bits = 7\n", __func__); |
03f0dbf7 AC |
2449 | break; |
2450 | default: | |
2451 | case CS8: | |
2452 | lData = LCR_BITS_8; | |
984f6868 | 2453 | dev_dbg(dev, "%s - data bits = 8\n", __func__); |
03f0dbf7 | 2454 | break; |
1da177e4 LT |
2455 | } |
2456 | ||
2457 | lParity = LCR_PAR_NONE; | |
2458 | if (cflag & PARENB) { | |
2459 | if (cflag & CMSPAR) { | |
2460 | if (cflag & PARODD) { | |
2461 | lParity = LCR_PAR_MARK; | |
984f6868 | 2462 | dev_dbg(dev, "%s - parity = mark\n", __func__); |
1da177e4 LT |
2463 | } else { |
2464 | lParity = LCR_PAR_SPACE; | |
984f6868 | 2465 | dev_dbg(dev, "%s - parity = space\n", __func__); |
1da177e4 LT |
2466 | } |
2467 | } else if (cflag & PARODD) { | |
2468 | lParity = LCR_PAR_ODD; | |
984f6868 | 2469 | dev_dbg(dev, "%s - parity = odd\n", __func__); |
1da177e4 LT |
2470 | } else { |
2471 | lParity = LCR_PAR_EVEN; | |
984f6868 | 2472 | dev_dbg(dev, "%s - parity = even\n", __func__); |
1da177e4 LT |
2473 | } |
2474 | } else { | |
984f6868 | 2475 | dev_dbg(dev, "%s - parity = none\n", __func__); |
1da177e4 LT |
2476 | } |
2477 | ||
2478 | if (cflag & CSTOPB) { | |
2479 | lStop = LCR_STOP_2; | |
984f6868 | 2480 | dev_dbg(dev, "%s - stop bits = 2\n", __func__); |
1da177e4 LT |
2481 | } else { |
2482 | lStop = LCR_STOP_1; | |
984f6868 | 2483 | dev_dbg(dev, "%s - stop bits = 1\n", __func__); |
1da177e4 LT |
2484 | } |
2485 | ||
2486 | /* figure out the flow control settings */ | |
2487 | rxFlow = txFlow = 0x00; | |
2488 | if (cflag & CRTSCTS) { | |
2489 | rxFlow |= IOSP_RX_FLOW_RTS; | |
2490 | txFlow |= IOSP_TX_FLOW_CTS; | |
984f6868 | 2491 | dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__); |
1da177e4 | 2492 | } else { |
984f6868 | 2493 | dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__); |
1da177e4 LT |
2494 | } |
2495 | ||
03f0dbf7 AC |
2496 | /* if we are implementing XON/XOFF, set the start and stop character |
2497 | in the device */ | |
1da177e4 LT |
2498 | if (I_IXOFF(tty) || I_IXON(tty)) { |
2499 | unsigned char stop_char = STOP_CHAR(tty); | |
2500 | unsigned char start_char = START_CHAR(tty); | |
2501 | ||
6e8cf775 GKH |
2502 | if ((!edge_serial->is_epic) || |
2503 | ((edge_serial->is_epic) && | |
2504 | (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) { | |
03f0dbf7 AC |
2505 | send_iosp_ext_cmd(edge_port, |
2506 | IOSP_CMD_SET_XON_CHAR, start_char); | |
2507 | send_iosp_ext_cmd(edge_port, | |
2508 | IOSP_CMD_SET_XOFF_CHAR, stop_char); | |
6e8cf775 | 2509 | } |
1da177e4 LT |
2510 | |
2511 | /* if we are implementing INBOUND XON/XOFF */ | |
2512 | if (I_IXOFF(tty)) { | |
2513 | rxFlow |= IOSP_RX_FLOW_XON_XOFF; | |
984f6868 GKH |
2514 | dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", |
2515 | __func__, start_char, stop_char); | |
1da177e4 | 2516 | } else { |
984f6868 | 2517 | dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__); |
1da177e4 LT |
2518 | } |
2519 | ||
2520 | /* if we are implementing OUTBOUND XON/XOFF */ | |
2521 | if (I_IXON(tty)) { | |
2522 | txFlow |= IOSP_TX_FLOW_XON_XOFF; | |
984f6868 GKH |
2523 | dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", |
2524 | __func__, start_char, stop_char); | |
1da177e4 | 2525 | } else { |
984f6868 | 2526 | dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__); |
1da177e4 LT |
2527 | } |
2528 | } | |
2529 | ||
2530 | /* Set flow control to the configured value */ | |
6e8cf775 GKH |
2531 | if ((!edge_serial->is_epic) || |
2532 | ((edge_serial->is_epic) && | |
2533 | (edge_serial->epic_descriptor.Supports.IOSPSetRxFlow))) | |
2534 | send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow); | |
2535 | if ((!edge_serial->is_epic) || | |
2536 | ((edge_serial->is_epic) && | |
2537 | (edge_serial->epic_descriptor.Supports.IOSPSetTxFlow))) | |
2538 | send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow); | |
1da177e4 LT |
2539 | |
2540 | ||
2541 | edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); | |
2542 | edge_port->shadowLCR |= (lData | lParity | lStop); | |
2543 | ||
2544 | edge_port->validDataMask = mask; | |
2545 | ||
2546 | /* Send the updated LCR value to the EdgePort */ | |
03f0dbf7 AC |
2547 | status = send_cmd_write_uart_register(edge_port, LCR, |
2548 | edge_port->shadowLCR); | |
2549 | if (status != 0) | |
1da177e4 | 2550 | return; |
1da177e4 LT |
2551 | |
2552 | /* set up the MCR register and send it to the EdgePort */ | |
2553 | edge_port->shadowMCR = MCR_MASTER_IE; | |
03f0dbf7 | 2554 | if (cflag & CBAUD) |
1da177e4 | 2555 | edge_port->shadowMCR |= (MCR_DTR | MCR_RTS); |
03f0dbf7 AC |
2556 | |
2557 | status = send_cmd_write_uart_register(edge_port, MCR, | |
2558 | edge_port->shadowMCR); | |
2559 | if (status != 0) | |
1da177e4 | 2560 | return; |
1da177e4 LT |
2561 | |
2562 | /* Determine divisor based on baud rate */ | |
2563 | baud = tty_get_baud_rate(tty); | |
2564 | if (!baud) { | |
2565 | /* pick a default, any default... */ | |
2566 | baud = 9600; | |
2567 | } | |
2568 | ||
984f6868 | 2569 | dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); |
03f0dbf7 | 2570 | status = send_cmd_write_baud_rate(edge_port, baud); |
6ce073bd AC |
2571 | if (status == -1) { |
2572 | /* Speed change was not possible - put back the old speed */ | |
2573 | baud = tty_termios_baud_rate(old_termios); | |
2574 | tty_encode_baud_rate(tty, baud, baud); | |
2575 | } | |
1da177e4 LT |
2576 | } |
2577 | ||
2578 | ||
2579 | /**************************************************************************** | |
2580 | * unicode_to_ascii | |
2581 | * Turns a string from Unicode into ASCII. | |
2582 | * Doesn't do a good job with any characters that are outside the normal | |
2583 | * ASCII range, but it's only for debugging... | |
2584 | * NOTE: expects the unicode in LE format | |
2585 | ****************************************************************************/ | |
03f0dbf7 AC |
2586 | static void unicode_to_ascii(char *string, int buflen, |
2587 | __le16 *unicode, int unicode_size) | |
1da177e4 LT |
2588 | { |
2589 | int i; | |
2590 | ||
ad93375a | 2591 | if (buflen <= 0) /* never happens, but... */ |
1da177e4 | 2592 | return; |
ad93375a | 2593 | --buflen; /* space for nul */ |
1da177e4 | 2594 | |
ad93375a PZ |
2595 | for (i = 0; i < unicode_size; i++) { |
2596 | if (i >= buflen) | |
2597 | break; | |
1da177e4 | 2598 | string[i] = (char)(le16_to_cpu(unicode[i])); |
ad93375a PZ |
2599 | } |
2600 | string[i] = 0x00; | |
1da177e4 LT |
2601 | } |
2602 | ||
2603 | ||
2604 | /**************************************************************************** | |
2605 | * get_manufacturing_desc | |
03f0dbf7 | 2606 | * reads in the manufacturing descriptor and stores it into the serial |
1da177e4 LT |
2607 | * structure. |
2608 | ****************************************************************************/ | |
03f0dbf7 | 2609 | static void get_manufacturing_desc(struct edgeport_serial *edge_serial) |
1da177e4 | 2610 | { |
984f6868 | 2611 | struct device *dev = &edge_serial->serial->dev->dev; |
1da177e4 LT |
2612 | int response; |
2613 | ||
984f6868 | 2614 | dev_dbg(dev, "getting manufacturer descriptor\n"); |
1da177e4 | 2615 | |
03f0dbf7 AC |
2616 | response = rom_read(edge_serial->serial, |
2617 | (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, | |
2618 | (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), | |
2619 | EDGE_MANUF_DESC_LEN, | |
2620 | (__u8 *)(&edge_serial->manuf_descriptor)); | |
1da177e4 | 2621 | |
03f0dbf7 | 2622 | if (response < 1) |
984f6868 | 2623 | dev_err(dev, "error in getting manufacturer descriptor\n"); |
03f0dbf7 | 2624 | else { |
1da177e4 | 2625 | char string[30]; |
984f6868 GKH |
2626 | dev_dbg(dev, "**Manufacturer Descriptor\n"); |
2627 | dev_dbg(dev, " RomSize: %dK\n", | |
03f0dbf7 | 2628 | edge_serial->manuf_descriptor.RomSize); |
984f6868 | 2629 | dev_dbg(dev, " RamSize: %dK\n", |
03f0dbf7 | 2630 | edge_serial->manuf_descriptor.RamSize); |
984f6868 | 2631 | dev_dbg(dev, " CpuRev: %d\n", |
03f0dbf7 | 2632 | edge_serial->manuf_descriptor.CpuRev); |
984f6868 | 2633 | dev_dbg(dev, " BoardRev: %d\n", |
03f0dbf7 | 2634 | edge_serial->manuf_descriptor.BoardRev); |
984f6868 | 2635 | dev_dbg(dev, " NumPorts: %d\n", |
03f0dbf7 | 2636 | edge_serial->manuf_descriptor.NumPorts); |
984f6868 | 2637 | dev_dbg(dev, " DescDate: %d/%d/%d\n", |
03f0dbf7 AC |
2638 | edge_serial->manuf_descriptor.DescDate[0], |
2639 | edge_serial->manuf_descriptor.DescDate[1], | |
2640 | edge_serial->manuf_descriptor.DescDate[2]+1900); | |
4bc203d9 | 2641 | unicode_to_ascii(string, sizeof(string), |
03f0dbf7 AC |
2642 | edge_serial->manuf_descriptor.SerialNumber, |
2643 | edge_serial->manuf_descriptor.SerNumLength/2); | |
984f6868 | 2644 | dev_dbg(dev, " SerialNumber: %s\n", string); |
4bc203d9 | 2645 | unicode_to_ascii(string, sizeof(string), |
03f0dbf7 AC |
2646 | edge_serial->manuf_descriptor.AssemblyNumber, |
2647 | edge_serial->manuf_descriptor.AssemblyNumLength/2); | |
984f6868 | 2648 | dev_dbg(dev, " AssemblyNumber: %s\n", string); |
4bc203d9 | 2649 | unicode_to_ascii(string, sizeof(string), |
ad93375a PZ |
2650 | edge_serial->manuf_descriptor.OemAssyNumber, |
2651 | edge_serial->manuf_descriptor.OemAssyNumLength/2); | |
984f6868 GKH |
2652 | dev_dbg(dev, " OemAssyNumber: %s\n", string); |
2653 | dev_dbg(dev, " UartType: %d\n", | |
03f0dbf7 | 2654 | edge_serial->manuf_descriptor.UartType); |
984f6868 | 2655 | dev_dbg(dev, " IonPid: %d\n", |
03f0dbf7 | 2656 | edge_serial->manuf_descriptor.IonPid); |
984f6868 | 2657 | dev_dbg(dev, " IonConfig: %d\n", |
03f0dbf7 | 2658 | edge_serial->manuf_descriptor.IonConfig); |
1da177e4 LT |
2659 | } |
2660 | } | |
2661 | ||
2662 | ||
2663 | /**************************************************************************** | |
2664 | * get_boot_desc | |
03f0dbf7 | 2665 | * reads in the bootloader descriptor and stores it into the serial |
1da177e4 LT |
2666 | * structure. |
2667 | ****************************************************************************/ | |
03f0dbf7 | 2668 | static void get_boot_desc(struct edgeport_serial *edge_serial) |
1da177e4 | 2669 | { |
984f6868 | 2670 | struct device *dev = &edge_serial->serial->dev->dev; |
1da177e4 LT |
2671 | int response; |
2672 | ||
984f6868 | 2673 | dev_dbg(dev, "getting boot descriptor\n"); |
1da177e4 | 2674 | |
03f0dbf7 AC |
2675 | response = rom_read(edge_serial->serial, |
2676 | (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, | |
2677 | (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), | |
2678 | EDGE_BOOT_DESC_LEN, | |
2679 | (__u8 *)(&edge_serial->boot_descriptor)); | |
1da177e4 | 2680 | |
03f0dbf7 | 2681 | if (response < 1) |
984f6868 | 2682 | dev_err(dev, "error in getting boot descriptor\n"); |
03f0dbf7 | 2683 | else { |
984f6868 GKH |
2684 | dev_dbg(dev, "**Boot Descriptor:\n"); |
2685 | dev_dbg(dev, " BootCodeLength: %d\n", | |
2686 | le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); | |
2687 | dev_dbg(dev, " MajorVersion: %d\n", | |
03f0dbf7 | 2688 | edge_serial->boot_descriptor.MajorVersion); |
984f6868 | 2689 | dev_dbg(dev, " MinorVersion: %d\n", |
03f0dbf7 | 2690 | edge_serial->boot_descriptor.MinorVersion); |
984f6868 | 2691 | dev_dbg(dev, " BuildNumber: %d\n", |
03f0dbf7 | 2692 | le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); |
984f6868 | 2693 | dev_dbg(dev, " Capabilities: 0x%x\n", |
03f0dbf7 | 2694 | le16_to_cpu(edge_serial->boot_descriptor.Capabilities)); |
984f6868 | 2695 | dev_dbg(dev, " UConfig0: %d\n", |
03f0dbf7 | 2696 | edge_serial->boot_descriptor.UConfig0); |
984f6868 | 2697 | dev_dbg(dev, " UConfig1: %d\n", |
03f0dbf7 | 2698 | edge_serial->boot_descriptor.UConfig1); |
1da177e4 LT |
2699 | } |
2700 | } | |
2701 | ||
2702 | ||
2703 | /**************************************************************************** | |
2704 | * load_application_firmware | |
2705 | * This is called to load the application firmware to the device | |
2706 | ****************************************************************************/ | |
03f0dbf7 | 2707 | static void load_application_firmware(struct edgeport_serial *edge_serial) |
1da177e4 | 2708 | { |
984f6868 | 2709 | struct device *dev = &edge_serial->serial->dev->dev; |
5b9ea932 JS |
2710 | const struct ihex_binrec *rec; |
2711 | const struct firmware *fw; | |
2712 | const char *fw_name; | |
2713 | const char *fw_info; | |
1da177e4 | 2714 | int response; |
5b9ea932 JS |
2715 | __u32 Operaddr; |
2716 | __u16 build; | |
1da177e4 LT |
2717 | |
2718 | switch (edge_serial->product_info.iDownloadFile) { | |
2719 | case EDGE_DOWNLOAD_FILE_I930: | |
5b9ea932 JS |
2720 | fw_info = "downloading firmware version (930)"; |
2721 | fw_name = "edgeport/down.fw"; | |
1da177e4 LT |
2722 | break; |
2723 | ||
2724 | case EDGE_DOWNLOAD_FILE_80251: | |
5b9ea932 JS |
2725 | fw_info = "downloading firmware version (80251)"; |
2726 | fw_name = "edgeport/down2.fw"; | |
1da177e4 LT |
2727 | break; |
2728 | ||
2729 | case EDGE_DOWNLOAD_FILE_NONE: | |
984f6868 | 2730 | dev_dbg(dev, "No download file specified, skipping download\n"); |
1da177e4 LT |
2731 | return; |
2732 | ||
2733 | default: | |
2734 | return; | |
2735 | } | |
2736 | ||
5b9ea932 JS |
2737 | response = request_ihex_firmware(&fw, fw_name, |
2738 | &edge_serial->serial->dev->dev); | |
2739 | if (response) { | |
984f6868 | 2740 | dev_err(dev, "Failed to load image \"%s\" err %d\n", |
5b9ea932 JS |
2741 | fw_name, response); |
2742 | return; | |
2743 | } | |
2744 | ||
2745 | rec = (const struct ihex_binrec *)fw->data; | |
2746 | build = (rec->data[2] << 8) | rec->data[3]; | |
2747 | ||
984f6868 | 2748 | dev_dbg(dev, "%s %d.%d.%d\n", fw_info, rec->data[0], rec->data[1], build); |
5b9ea932 | 2749 | |
271c1150 BM |
2750 | edge_serial->product_info.FirmwareMajorVersion = rec->data[0]; |
2751 | edge_serial->product_info.FirmwareMinorVersion = rec->data[1]; | |
5b9ea932 | 2752 | edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build); |
1da177e4 | 2753 | |
5b9ea932 JS |
2754 | for (rec = ihex_next_binrec(rec); rec; |
2755 | rec = ihex_next_binrec(rec)) { | |
2756 | Operaddr = be32_to_cpu(rec->addr); | |
2757 | response = sram_write(edge_serial->serial, | |
2758 | Operaddr >> 16, | |
2759 | Operaddr & 0xFFFF, | |
2760 | be16_to_cpu(rec->len), | |
2761 | &rec->data[0]); | |
1da177e4 | 2762 | if (response < 0) { |
5b9ea932 JS |
2763 | dev_err(&edge_serial->serial->dev->dev, |
2764 | "sram_write failed (%x, %x, %d)\n", | |
2765 | Operaddr >> 16, Operaddr & 0xFFFF, | |
2766 | be16_to_cpu(rec->len)); | |
1da177e4 LT |
2767 | break; |
2768 | } | |
2769 | } | |
2770 | ||
984f6868 GKH |
2771 | dev_dbg(dev, "sending exec_dl_code\n"); |
2772 | response = usb_control_msg (edge_serial->serial->dev, | |
2773 | usb_sndctrlpipe(edge_serial->serial->dev, 0), | |
2774 | USB_REQUEST_ION_EXEC_DL_CODE, | |
1da177e4 LT |
2775 | 0x40, 0x4000, 0x0001, NULL, 0, 3000); |
2776 | ||
5b9ea932 | 2777 | release_firmware(fw); |
1da177e4 LT |
2778 | } |
2779 | ||
2780 | ||
2781 | /**************************************************************************** | |
2782 | * edge_startup | |
2783 | ****************************************************************************/ | |
03f0dbf7 | 2784 | static int edge_startup(struct usb_serial *serial) |
1da177e4 LT |
2785 | { |
2786 | struct edgeport_serial *edge_serial; | |
1da177e4 | 2787 | struct usb_device *dev; |
984f6868 | 2788 | struct device *ddev = &serial->dev->dev; |
c27f3efc | 2789 | int i; |
6e8cf775 | 2790 | int response; |
cb8eaa8b RK |
2791 | bool interrupt_in_found; |
2792 | bool bulk_in_found; | |
2793 | bool bulk_out_found; | |
6e8cf775 GKH |
2794 | static __u32 descriptor[3] = { EDGE_COMPATIBILITY_MASK0, |
2795 | EDGE_COMPATIBILITY_MASK1, | |
2796 | EDGE_COMPATIBILITY_MASK2 }; | |
1da177e4 LT |
2797 | |
2798 | dev = serial->dev; | |
2799 | ||
2800 | /* create our private serial structure */ | |
80b6ca48 | 2801 | edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); |
1da177e4 | 2802 | if (edge_serial == NULL) { |
441b62c1 | 2803 | dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); |
1da177e4 LT |
2804 | return -ENOMEM; |
2805 | } | |
1da177e4 LT |
2806 | spin_lock_init(&edge_serial->es_lock); |
2807 | edge_serial->serial = serial; | |
2808 | usb_set_serial_data(serial, edge_serial); | |
2809 | ||
2810 | /* get the name for the device from the device */ | |
f10718f5 | 2811 | i = usb_string(dev, dev->descriptor.iManufacturer, |
ad93375a | 2812 | &edge_serial->name[0], MAX_NAME_LEN+1); |
f10718f5 DC |
2813 | if (i < 0) |
2814 | i = 0; | |
ad93375a | 2815 | edge_serial->name[i++] = ' '; |
f10718f5 | 2816 | usb_string(dev, dev->descriptor.iProduct, |
ad93375a | 2817 | &edge_serial->name[i], MAX_NAME_LEN+2 - i); |
1da177e4 LT |
2818 | |
2819 | dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name); | |
2820 | ||
6e8cf775 GKH |
2821 | /* Read the epic descriptor */ |
2822 | if (get_epic_descriptor(edge_serial) <= 0) { | |
2823 | /* memcpy descriptor to Supports structures */ | |
2824 | memcpy(&edge_serial->epic_descriptor.Supports, descriptor, | |
2825 | sizeof(struct edge_compatibility_bits)); | |
1da177e4 | 2826 | |
6e8cf775 | 2827 | /* get the manufacturing descriptor for this device */ |
03f0dbf7 | 2828 | get_manufacturing_desc(edge_serial); |
1da177e4 | 2829 | |
6e8cf775 | 2830 | /* get the boot descriptor */ |
03f0dbf7 | 2831 | get_boot_desc(edge_serial); |
6e8cf775 GKH |
2832 | |
2833 | get_product_info(edge_serial); | |
2834 | } | |
1da177e4 LT |
2835 | |
2836 | /* set the number of ports from the manufacturing description */ | |
2837 | /* serial->num_ports = serial->product_info.NumPorts; */ | |
6e8cf775 GKH |
2838 | if ((!edge_serial->is_epic) && |
2839 | (edge_serial->product_info.NumPorts != serial->num_ports)) { | |
984f6868 GKH |
2840 | dev_warn(ddev, |
2841 | "Device Reported %d serial ports vs. core thinking we have %d ports, email greg@kroah.com this information.\n", | |
6e8cf775 GKH |
2842 | edge_serial->product_info.NumPorts, |
2843 | serial->num_ports); | |
1da177e4 LT |
2844 | } |
2845 | ||
984f6868 | 2846 | dev_dbg(ddev, "%s - time 1 %ld\n", __func__, jiffies); |
1da177e4 | 2847 | |
6e8cf775 GKH |
2848 | /* If not an EPiC device */ |
2849 | if (!edge_serial->is_epic) { | |
2850 | /* now load the application firmware into this device */ | |
03f0dbf7 | 2851 | load_application_firmware(edge_serial); |
1da177e4 | 2852 | |
984f6868 | 2853 | dev_dbg(ddev, "%s - time 2 %ld\n", __func__, jiffies); |
1da177e4 | 2854 | |
6e8cf775 | 2855 | /* Check current Edgeport EEPROM and update if necessary */ |
03f0dbf7 | 2856 | update_edgeport_E2PROM(edge_serial); |
1da177e4 | 2857 | |
984f6868 | 2858 | dev_dbg(ddev, "%s - time 3 %ld\n", __func__, jiffies); |
6e8cf775 GKH |
2859 | |
2860 | /* set the configuration to use #1 */ | |
984f6868 | 2861 | /* dev_dbg(ddev, "set_configuration 1\n"); */ |
03f0dbf7 | 2862 | /* usb_set_configuration (dev, 1); */ |
6e8cf775 | 2863 | } |
984f6868 | 2864 | dev_dbg(ddev, " FirmwareMajorVersion %d.%d.%d\n", |
5b9ea932 JS |
2865 | edge_serial->product_info.FirmwareMajorVersion, |
2866 | edge_serial->product_info.FirmwareMinorVersion, | |
2867 | le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber)); | |
1da177e4 | 2868 | |
03f0dbf7 | 2869 | /* we set up the pointers to the endpoints in the edge_open function, |
1da177e4 LT |
2870 | * as the structures aren't created yet. */ |
2871 | ||
6e8cf775 GKH |
2872 | response = 0; |
2873 | ||
2874 | if (edge_serial->is_epic) { | |
03f0dbf7 AC |
2875 | /* EPIC thing, set up our interrupt polling now and our read |
2876 | * urb, so that the device knows it really is connected. */ | |
cb8eaa8b | 2877 | interrupt_in_found = bulk_in_found = bulk_out_found = false; |
03f0dbf7 AC |
2878 | for (i = 0; i < serial->interface->altsetting[0] |
2879 | .desc.bNumEndpoints; ++i) { | |
6e8cf775 GKH |
2880 | struct usb_endpoint_descriptor *endpoint; |
2881 | int buffer_size; | |
2882 | ||
03f0dbf7 AC |
2883 | endpoint = &serial->interface->altsetting[0]. |
2884 | endpoint[i].desc; | |
29cc8897 | 2885 | buffer_size = usb_endpoint_maxp(endpoint); |
cb8eaa8b | 2886 | if (!interrupt_in_found && |
6e8cf775 GKH |
2887 | (usb_endpoint_is_int_in(endpoint))) { |
2888 | /* we found a interrupt in endpoint */ | |
984f6868 | 2889 | dev_dbg(ddev, "found interrupt in\n"); |
6e8cf775 GKH |
2890 | |
2891 | /* not set up yet, so do it now */ | |
03f0dbf7 AC |
2892 | edge_serial->interrupt_read_urb = |
2893 | usb_alloc_urb(0, GFP_KERNEL); | |
6e8cf775 | 2894 | if (!edge_serial->interrupt_read_urb) { |
984f6868 | 2895 | dev_err(ddev, "out of memory\n"); |
6e8cf775 GKH |
2896 | return -ENOMEM; |
2897 | } | |
03f0dbf7 AC |
2898 | edge_serial->interrupt_in_buffer = |
2899 | kmalloc(buffer_size, GFP_KERNEL); | |
6e8cf775 | 2900 | if (!edge_serial->interrupt_in_buffer) { |
984f6868 | 2901 | dev_err(ddev, "out of memory\n"); |
6e8cf775 GKH |
2902 | usb_free_urb(edge_serial->interrupt_read_urb); |
2903 | return -ENOMEM; | |
2904 | } | |
03f0dbf7 AC |
2905 | edge_serial->interrupt_in_endpoint = |
2906 | endpoint->bEndpointAddress; | |
6e8cf775 GKH |
2907 | |
2908 | /* set up our interrupt urb */ | |
03f0dbf7 AC |
2909 | usb_fill_int_urb( |
2910 | edge_serial->interrupt_read_urb, | |
2911 | dev, | |
2912 | usb_rcvintpipe(dev, | |
2913 | endpoint->bEndpointAddress), | |
2914 | edge_serial->interrupt_in_buffer, | |
2915 | buffer_size, | |
2916 | edge_interrupt_callback, | |
2917 | edge_serial, | |
2918 | endpoint->bInterval); | |
6e8cf775 | 2919 | |
cb8eaa8b | 2920 | interrupt_in_found = true; |
6e8cf775 GKH |
2921 | } |
2922 | ||
cb8eaa8b | 2923 | if (!bulk_in_found && |
03f0dbf7 | 2924 | (usb_endpoint_is_bulk_in(endpoint))) { |
6e8cf775 | 2925 | /* we found a bulk in endpoint */ |
984f6868 | 2926 | dev_dbg(ddev, "found bulk in\n"); |
6e8cf775 GKH |
2927 | |
2928 | /* not set up yet, so do it now */ | |
03f0dbf7 AC |
2929 | edge_serial->read_urb = |
2930 | usb_alloc_urb(0, GFP_KERNEL); | |
6e8cf775 | 2931 | if (!edge_serial->read_urb) { |
984f6868 | 2932 | dev_err(ddev, "out of memory\n"); |
6e8cf775 GKH |
2933 | return -ENOMEM; |
2934 | } | |
03f0dbf7 AC |
2935 | edge_serial->bulk_in_buffer = |
2936 | kmalloc(buffer_size, GFP_KERNEL); | |
6e8cf775 | 2937 | if (!edge_serial->bulk_in_buffer) { |
194343d9 | 2938 | dev_err(&dev->dev, "out of memory\n"); |
6e8cf775 GKH |
2939 | usb_free_urb(edge_serial->read_urb); |
2940 | return -ENOMEM; | |
2941 | } | |
03f0dbf7 AC |
2942 | edge_serial->bulk_in_endpoint = |
2943 | endpoint->bEndpointAddress; | |
6e8cf775 GKH |
2944 | |
2945 | /* set up our bulk in urb */ | |
2946 | usb_fill_bulk_urb(edge_serial->read_urb, dev, | |
03f0dbf7 AC |
2947 | usb_rcvbulkpipe(dev, |
2948 | endpoint->bEndpointAddress), | |
2949 | edge_serial->bulk_in_buffer, | |
29cc8897 | 2950 | usb_endpoint_maxp(endpoint), |
03f0dbf7 AC |
2951 | edge_bulk_in_callback, |
2952 | edge_serial); | |
cb8eaa8b | 2953 | bulk_in_found = true; |
6e8cf775 GKH |
2954 | } |
2955 | ||
cb8eaa8b | 2956 | if (!bulk_out_found && |
6e8cf775 GKH |
2957 | (usb_endpoint_is_bulk_out(endpoint))) { |
2958 | /* we found a bulk out endpoint */ | |
984f6868 | 2959 | dev_dbg(ddev, "found bulk out\n"); |
03f0dbf7 AC |
2960 | edge_serial->bulk_out_endpoint = |
2961 | endpoint->bEndpointAddress; | |
cb8eaa8b | 2962 | bulk_out_found = true; |
6e8cf775 GKH |
2963 | } |
2964 | } | |
2965 | ||
cb8eaa8b | 2966 | if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) { |
984f6868 | 2967 | dev_err(ddev, "Error - the proper endpoints were not found!\n"); |
6e8cf775 GKH |
2968 | return -ENODEV; |
2969 | } | |
2970 | ||
2971 | /* start interrupt read for this edgeport this interrupt will | |
2972 | * continue as long as the edgeport is connected */ | |
03f0dbf7 AC |
2973 | response = usb_submit_urb(edge_serial->interrupt_read_urb, |
2974 | GFP_KERNEL); | |
6e8cf775 | 2975 | if (response) |
984f6868 | 2976 | dev_err(ddev, "%s - Error %d submitting control urb\n", |
194343d9 | 2977 | __func__, response); |
6e8cf775 GKH |
2978 | } |
2979 | return response; | |
1da177e4 LT |
2980 | } |
2981 | ||
2982 | ||
2983 | /**************************************************************************** | |
f9c99bb8 | 2984 | * edge_disconnect |
1da177e4 LT |
2985 | * This function is called whenever the device is removed from the usb bus. |
2986 | ****************************************************************************/ | |
f9c99bb8 | 2987 | static void edge_disconnect(struct usb_serial *serial) |
1da177e4 | 2988 | { |
6e8cf775 | 2989 | struct edgeport_serial *edge_serial = usb_get_serial_data(serial); |
1da177e4 | 2990 | |
1da177e4 | 2991 | /* stop reads and writes on all ports */ |
6e8cf775 GKH |
2992 | /* free up our endpoint stuff */ |
2993 | if (edge_serial->is_epic) { | |
74ac07e8 | 2994 | usb_kill_urb(edge_serial->interrupt_read_urb); |
6e8cf775 GKH |
2995 | usb_free_urb(edge_serial->interrupt_read_urb); |
2996 | kfree(edge_serial->interrupt_in_buffer); | |
2997 | ||
74ac07e8 | 2998 | usb_kill_urb(edge_serial->read_urb); |
6e8cf775 GKH |
2999 | usb_free_urb(edge_serial->read_urb); |
3000 | kfree(edge_serial->bulk_in_buffer); | |
3001 | } | |
f9c99bb8 AS |
3002 | } |
3003 | ||
3004 | ||
3005 | /**************************************************************************** | |
3006 | * edge_release | |
3007 | * This function is called when the device structure is deallocated. | |
3008 | ****************************************************************************/ | |
3009 | static void edge_release(struct usb_serial *serial) | |
3010 | { | |
3011 | struct edgeport_serial *edge_serial = usb_get_serial_data(serial); | |
6e8cf775 GKH |
3012 | |
3013 | kfree(edge_serial); | |
1da177e4 LT |
3014 | } |
3015 | ||
c27f3efc JH |
3016 | static int edge_port_probe(struct usb_serial_port *port) |
3017 | { | |
3018 | struct edgeport_port *edge_port; | |
3019 | ||
3020 | edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL); | |
3021 | if (!edge_port) | |
3022 | return -ENOMEM; | |
3023 | ||
3024 | spin_lock_init(&edge_port->ep_lock); | |
3025 | edge_port->port = port; | |
3026 | ||
3027 | usb_set_serial_port_data(port, edge_port); | |
3028 | ||
3029 | return 0; | |
3030 | } | |
3031 | ||
3032 | static int edge_port_remove(struct usb_serial_port *port) | |
3033 | { | |
3034 | struct edgeport_port *edge_port; | |
3035 | ||
3036 | edge_port = usb_get_serial_port_data(port); | |
3037 | kfree(edge_port); | |
3038 | ||
3039 | return 0; | |
3040 | } | |
3041 | ||
68e24113 | 3042 | module_usb_serial_driver(serial_drivers, id_table_combined); |
1da177e4 | 3043 | |
03f0dbf7 AC |
3044 | MODULE_AUTHOR(DRIVER_AUTHOR); |
3045 | MODULE_DESCRIPTION(DRIVER_DESC); | |
1da177e4 | 3046 | MODULE_LICENSE("GPL"); |
5b9ea932 JS |
3047 | MODULE_FIRMWARE("edgeport/boot.fw"); |
3048 | MODULE_FIRMWARE("edgeport/boot2.fw"); | |
3049 | MODULE_FIRMWARE("edgeport/down.fw"); | |
3050 | MODULE_FIRMWARE("edgeport/down2.fw"); |