[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / usb / musb / musb_core.h

/*
 * MUSB OTG driver defines
 *
 * Copyright 2005 Mentor Graphics Corporation
 * Copyright (C) 2005-2006 by Texas Instruments
 * Copyright (C) 2006-2007 Nokia Corporation
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 *
 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

#ifndef __MUSB_CORE_H__
#define __MUSB_CORE_H__

#include <linux/slab.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
#include <linux/usb/musb.h>

struct musb;
struct musb_hw_ep;
struct musb_ep;


#include "musb_debug.h"
#include "musb_dma.h"

#include "musb_io.h"
#include "musb_regs.h"

#include "musb_gadget.h"
#include "../core/hcd.h"
#include "musb_host.h"


#ifdef CONFIG_USB_MUSB_OTG

#define	is_peripheral_enabled(musb)	((musb)->board_mode != MUSB_HOST)
#define	is_host_enabled(musb)		((musb)->board_mode != MUSB_PERIPHERAL)
#define	is_otg_enabled(musb)		((musb)->board_mode == MUSB_OTG)

/* NOTE:  otg and peripheral-only state machines start at B_IDLE.
 * OTG or host-only go to A_IDLE when ID is sensed.
 */
#define is_peripheral_active(m)		(!(m)->is_host)
#define is_host_active(m)		((m)->is_host)

#else
#define	is_peripheral_enabled(musb)	is_peripheral_capable()
#define	is_host_enabled(musb)		is_host_capable()
#define	is_otg_enabled(musb)		0

#define	is_peripheral_active(musb)	is_peripheral_capable()
#define	is_host_active(musb)		is_host_capable()
#endif

#if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL)
/* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always
 * override that choice selection (often USB_GADGET_DUMMY_HCD).
 */
#ifndef CONFIG_USB_GADGET_MUSB_HDRC
#error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC
#endif
#endif	/* need MUSB gadget selection */


#ifdef CONFIG_PROC_FS
#include <linux/fs.h>
#define MUSB_CONFIG_PROC_FS
#endif

/****************************** PERIPHERAL ROLE *****************************/

#ifdef CONFIG_USB_GADGET_MUSB_HDRC

#define	is_peripheral_capable()	(1)

extern irqreturn_t musb_g_ep0_irq(struct musb *);
extern void musb_g_tx(struct musb *, u8);
extern void musb_g_rx(struct musb *, u8);
extern void musb_g_reset(struct musb *);
extern void musb_g_suspend(struct musb *);
extern void musb_g_resume(struct musb *);
extern void musb_g_wakeup(struct musb *);
extern void musb_g_disconnect(struct musb *);

#else

#define	is_peripheral_capable()	(0)

static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; }
static inline void musb_g_reset(struct musb *m) {}
static inline void musb_g_suspend(struct musb *m) {}
static inline void musb_g_resume(struct musb *m) {}
static inline void musb_g_wakeup(struct musb *m) {}
static inline void musb_g_disconnect(struct musb *m) {}

#endif

/****************************** HOST ROLE ***********************************/

#ifdef CONFIG_USB_MUSB_HDRC_HCD

#define	is_host_capable()	(1)

extern irqreturn_t musb_h_ep0_irq(struct musb *);
extern void musb_host_tx(struct musb *, u8);
extern void musb_host_rx(struct musb *, u8);

#else

#define	is_host_capable()	(0)

static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; }
static inline void musb_host_tx(struct musb *m, u8 e) {}
static inline void musb_host_rx(struct musb *m, u8 e) {}

#endif


/****************************** CONSTANTS ********************************/

#ifndef MUSB_C_NUM_EPS
#define MUSB_C_NUM_EPS ((u8)16)
#endif

#ifndef MUSB_MAX_END0_PACKET
#define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
#endif

/* host side ep0 states */
enum musb_h_ep0_state {
	MUSB_EP0_IDLE,
	MUSB_EP0_START,			/* expect ack of setup */
	MUSB_EP0_IN,			/* expect IN DATA */
	MUSB_EP0_OUT,			/* expect ack of OUT DATA */
	MUSB_EP0_STATUS,		/* expect ack of STATUS */
} __attribute__ ((packed));

/* peripheral side ep0 states */
enum musb_g_ep0_state {
	MUSB_EP0_STAGE_SETUP,		/* idle, waiting for setup */
	MUSB_EP0_STAGE_TX,		/* IN data */
	MUSB_EP0_STAGE_RX,		/* OUT data */
	MUSB_EP0_STAGE_STATUSIN,	/* (after OUT data) */
	MUSB_EP0_STAGE_STATUSOUT,	/* (after IN data) */
	MUSB_EP0_STAGE_ACKWAIT,		/* after zlp, before statusin */
} __attribute__ ((packed));

/* OTG protocol constants */
#define OTG_TIME_A_WAIT_VRISE	100		/* msec (max) */
#define OTG_TIME_A_WAIT_BCON	0		/* 0=infinite; min 1000 msec */
#define OTG_TIME_A_IDLE_BDIS	200		/* msec (min) */

/*************************** REGISTER ACCESS ********************************/

/* Endpoint registers (other than dynfifo setup) can be accessed either
 * directly with the "flat" model, or after setting up an index register.
 */

#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \
		|| defined(CONFIG_ARCH_OMAP3430)
/* REVISIT indexed access seemed to
 * misbehave (on DaVinci) for at least peripheral IN ...
 */
#define	MUSB_FLAT_REG
#endif

/* TUSB mapping: "flat" plus ep0 special cases */
#if	defined(CONFIG_USB_TUSB6010)
#define musb_ep_select(_mbase, _epnum) \
	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
#define	MUSB_EP_OFFSET			MUSB_TUSB_OFFSET

/* "flat" mapping: each endpoint has its own i/o address */
#elif	defined(MUSB_FLAT_REG)
#define musb_ep_select(_mbase, _epnum)	(((void)(_mbase)), ((void)(_epnum)))
#define	MUSB_EP_OFFSET			MUSB_FLAT_OFFSET

/* "indexed" mapping: INDEX register controls register bank select */
#else
#define musb_ep_select(_mbase, _epnum) \
	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
#define	MUSB_EP_OFFSET			MUSB_INDEXED_OFFSET
#endif

/****************************** FUNCTIONS ********************************/

#define MUSB_HST_MODE(_musb)\
	{ (_musb)->is_host = true; }
#define MUSB_DEV_MODE(_musb) \
	{ (_musb)->is_host = false; }

#define test_devctl_hst_mode(_x) \
	(musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)

#define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")

/******************************** TYPES *************************************/

/*
 * struct musb_hw_ep - endpoint hardware (bidirectional)
 *
 * Ordered slightly for better cacheline locality.
 */
struct musb_hw_ep {
	struct musb		*musb;
	void __iomem		*fifo;
	void __iomem		*regs;

#ifdef CONFIG_USB_TUSB6010
	void __iomem		*conf;
#endif

	/* index in musb->endpoints[]  */
	u8			epnum;

	/* hardware configuration, possibly dynamic */
	bool			is_shared_fifo;
	bool			tx_double_buffered;
	bool			rx_double_buffered;
	u16			max_packet_sz_tx;
	u16			max_packet_sz_rx;

	struct dma_channel	*tx_channel;
	struct dma_channel	*rx_channel;

#ifdef CONFIG_USB_TUSB6010
	/* TUSB has "asynchronous" and "synchronous" dma modes */
	dma_addr_t		fifo_async;
	dma_addr_t		fifo_sync;
	void __iomem		*fifo_sync_va;
#endif

#ifdef CONFIG_USB_MUSB_HDRC_HCD
	void __iomem		*target_regs;

	/* currently scheduled peripheral endpoint */
	struct musb_qh		*in_qh;
	struct musb_qh		*out_qh;

	u8			rx_reinit;
	u8			tx_reinit;
#endif

#ifdef CONFIG_USB_GADGET_MUSB_HDRC
	/* peripheral side */
	struct musb_ep		ep_in;			/* TX */
	struct musb_ep		ep_out;			/* RX */
#endif
};

static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep)
{
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
	return next_request(&hw_ep->ep_in);
#else
	return NULL;
#endif
}

static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep)
{
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
	return next_request(&hw_ep->ep_out);
#else
	return NULL;
#endif
}

/*
 * struct musb - Driver instance data.
 */
struct musb {
	/* device lock */
	spinlock_t		lock;
	struct clk		*clock;
	irqreturn_t		(*isr)(int, void *);
	struct work_struct	irq_work;

/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
#define MUSB_PORT_STAT_RESUME	(1 << 31)

	u32			port1_status;

#ifdef CONFIG_USB_MUSB_HDRC_HCD
	unsigned long		rh_timer;

	enum musb_h_ep0_state	ep0_stage;

	/* bulk traffic normally dedicates endpoint hardware, and each
	 * direction has its own ring of host side endpoints.
	 * we try to progress the transfer at the head of each endpoint's
	 * queue until it completes or NAKs too much; then we try the next
	 * endpoint.
	 */
	struct musb_hw_ep	*bulk_ep;

	struct list_head	control;	/* of musb_qh */
	struct list_head	in_bulk;	/* of musb_qh */
	struct list_head	out_bulk;	/* of musb_qh */
	struct musb_qh		*periodic[32];	/* tree of interrupt+iso */
#endif

	/* called with IRQs blocked; ON/nonzero implies starting a session,
	 * and waiting at least a_wait_vrise_tmout.
	 */
	void			(*board_set_vbus)(struct musb *, int is_on);

	struct dma_controller	*dma_controller;

	struct device		*controller;
	void __iomem		*ctrl_base;
	void __iomem		*mregs;

#ifdef CONFIG_USB_TUSB6010
	dma_addr_t		async;
	dma_addr_t		sync;
	void __iomem		*sync_va;
#endif

	/* passed down from chip/board specific irq handlers */
	u8			int_usb;
	u16			int_rx;
	u16			int_tx;

	struct otg_transceiver	xceiv;

	int nIrq;
	unsigned		irq_wake:1;

	struct musb_hw_ep	 endpoints[MUSB_C_NUM_EPS];
#define control_ep		endpoints

#define VBUSERR_RETRY_COUNT	3
	u16			vbuserr_retry;
	u16 epmask;
	u8 nr_endpoints;

	u8 board_mode;		/* enum musb_mode */
	int			(*board_set_power)(int state);

	int			(*set_clock)(struct clk *clk, int is_active);

	u8			min_power;	/* vbus for periph, in mA/2 */

	bool			is_host;

	int			a_wait_bcon;	/* VBUS timeout in msecs */
	unsigned long		idle_timeout;	/* Next timeout in jiffies */

	/* active means connected and not suspended */
	unsigned		is_active:1;

	unsigned is_multipoint:1;
	unsigned ignore_disconnect:1;	/* during bus resets */

#ifdef C_MP_TX
	unsigned bulk_split:1;
#define	can_bulk_split(musb,type) \
		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
#else
#define	can_bulk_split(musb, type)	0
#endif

#ifdef C_MP_RX
	unsigned bulk_combine:1;
#define	can_bulk_combine(musb,type) \
		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
#else
#define	can_bulk_combine(musb, type)	0
#endif

#ifdef CONFIG_USB_GADGET_MUSB_HDRC
	/* is_suspended means USB B_PERIPHERAL suspend */
	unsigned		is_suspended:1;

	/* may_wakeup means remote wakeup is enabled */
	unsigned		may_wakeup:1;

	/* is_self_powered is reported in device status and the
	 * config descriptor.  is_bus_powered means B_PERIPHERAL
	 * draws some VBUS current; both can be true.
	 */
	unsigned		is_self_powered:1;
	unsigned		is_bus_powered:1;

	unsigned		set_address:1;
	unsigned		test_mode:1;
	unsigned		softconnect:1;

	u8			address;
	u8			test_mode_nr;
	u16			ackpend;		/* ep0 */
	enum musb_g_ep0_state	ep0_state;
	struct usb_gadget	g;			/* the gadget */
	struct usb_gadget_driver *gadget_driver;	/* its driver */
#endif

	struct musb_hdrc_config	*config;

#ifdef MUSB_CONFIG_PROC_FS
	struct proc_dir_entry *proc_entry;
#endif
};

static inline void musb_set_vbus(struct musb *musb, int is_on)
{
	musb->board_set_vbus(musb, is_on);
}

#ifdef CONFIG_USB_GADGET_MUSB_HDRC
static inline struct musb *gadget_to_musb(struct usb_gadget *g)
{
	return container_of(g, struct musb, g);
}
#endif


/***************************** Glue it together *****************************/

extern const char musb_driver_name[];

extern void musb_start(struct musb *musb);
extern void musb_stop(struct musb *musb);

extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);

extern void musb_load_testpacket(struct musb *);

extern irqreturn_t musb_interrupt(struct musb *);

extern void musb_platform_enable(struct musb *musb);
extern void musb_platform_disable(struct musb *musb);

extern void musb_hnp_stop(struct musb *musb);

extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);

#if defined(CONFIG_USB_TUSB6010) || \
	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
#else
#define musb_platform_try_idle(x, y)		do {} while (0)
#endif

#ifdef CONFIG_USB_TUSB6010
extern int musb_platform_get_vbus_status(struct musb *musb);
#else
#define musb_platform_get_vbus_status(x)	0
#endif

extern int __init musb_platform_init(struct musb *musb);
extern int musb_platform_exit(struct musb *musb);

#endif	/* __MUSB_CORE_H__ */
Commit	Line	Data
550a7375 FB	1	/*
	2	* MUSB OTG driver defines
	3	*
	4	* Copyright 2005 Mentor Graphics Corporation
	5	* Copyright (C) 2005-2006 by Texas Instruments
	6	* Copyright (C) 2006-2007 Nokia Corporation
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License
	10	* version 2 as published by the Free Software Foundation.
	11	*
	12	* This program is distributed in the hope that it will be useful, but
	13	* WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	15	* General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
	20	* 02110-1301 USA
	21	*
	22	* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
	23	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	24	* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
	25	* NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
	26	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
	27	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
	28	* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
	29	* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	30	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
	31	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	32	*
	33	*/
	34
	35	#ifndef __MUSB_CORE_H__
	36	#define __MUSB_CORE_H__
	37
	38	#include <linux/slab.h>
	39	#include <linux/list.h>
	40	#include <linux/interrupt.h>
	41	#include <linux/smp_lock.h>
	42	#include <linux/errno.h>
	43	#include <linux/clk.h>
	44	#include <linux/device.h>
	45	#include <linux/usb/ch9.h>
	46	#include <linux/usb/gadget.h>
	47	#include <linux/usb.h>
	48	#include <linux/usb/otg.h>
	49	#include <linux/usb/musb.h>
	50
	51	struct musb;
	52	struct musb_hw_ep;
	53	struct musb_ep;
	54
	55
	56	#include "musb_debug.h"
	57	#include "musb_dma.h"
	58
550a7375 FB	59	#include "musb_io.h"
	60	#include "musb_regs.h"
	61
	62	#include "musb_gadget.h"
	63	#include "../core/hcd.h"
	64	#include "musb_host.h"
	65
	66
	67
	68	#ifdef CONFIG_USB_MUSB_OTG
	69
	70	#define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST)
	71	#define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL)
	72	#define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG)
	73
	74	/* NOTE: otg and peripheral-only state machines start at B_IDLE.
	75	* OTG or host-only go to A_IDLE when ID is sensed.
	76	*/
	77	#define is_peripheral_active(m) (!(m)->is_host)
	78	#define is_host_active(m) ((m)->is_host)
	79
	80	#else
	81	#define is_peripheral_enabled(musb) is_peripheral_capable()
	82	#define is_host_enabled(musb) is_host_capable()
	83	#define is_otg_enabled(musb) 0
	84
	85	#define is_peripheral_active(musb) is_peripheral_capable()
	86	#define is_host_active(musb) is_host_capable()
	87	#endif
	88
	89	#if defined(CONFIG_USB_MUSB_OTG) \|\| defined(CONFIG_USB_MUSB_PERIPHERAL)
	90	/* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always
	91	* override that choice selection (often USB_GADGET_DUMMY_HCD).
	92	*/
	93	#ifndef CONFIG_USB_GADGET_MUSB_HDRC
	94	#error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC
	95	#endif
	96	#endif /* need MUSB gadget selection */
	97
	98
	99	#ifdef CONFIG_PROC_FS
	100	#include <linux/fs.h>
	101	#define MUSB_CONFIG_PROC_FS
	102	#endif
	103
	104	/**************************** PERIPHERAL ROLE ***************************/
	105
	106	#ifdef CONFIG_USB_GADGET_MUSB_HDRC
	107
	108	#define is_peripheral_capable() (1)
	109
	110	extern irqreturn_t musb_g_ep0_irq(struct musb *);
	111	extern void musb_g_tx(struct musb *, u8);
	112	extern void musb_g_rx(struct musb *, u8);
	113	extern void musb_g_reset(struct musb *);
	114	extern void musb_g_suspend(struct musb *);
	115	extern void musb_g_resume(struct musb *);
	116	extern void musb_g_wakeup(struct musb *);
	117	extern void musb_g_disconnect(struct musb *);
	118
	119	#else
	120
	121	#define is_peripheral_capable() (0)
	122
123	static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; }
124	static inline void musb_g_reset(struct musb *m) {}
125	static inline void musb_g_suspend(struct musb *m) {}
126	static inline void musb_g_resume(struct musb *m) {}
127	static inline void musb_g_wakeup(struct musb *m) {}
128	static inline void musb_g_disconnect(struct musb *m) {}
129
130	#endif
131
132	/**************************** HOST ROLE *********************************/
133
134	#ifdef CONFIG_USB_MUSB_HDRC_HCD
135
136	#define is_host_capable() (1)
137
138	extern irqreturn_t musb_h_ep0_irq(struct musb *);
139	extern void musb_host_tx(struct musb *, u8);
140	extern void musb_host_rx(struct musb *, u8);
141
142	#else
143
144	#define is_host_capable() (0)
145
146	static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; }
147	static inline void musb_host_tx(struct musb *m, u8 e) {}
148	static inline void musb_host_rx(struct musb *m, u8 e) {}
149
150	#endif
151
152
153	/**************************** CONSTANTS ******************************/
154
155	#ifndef MUSB_C_NUM_EPS
156	#define MUSB_C_NUM_EPS ((u8)16)
157	#endif
158
159	#ifndef MUSB_MAX_END0_PACKET
160	#define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
161	#endif
162
163	/* host side ep0 states */
164	enum musb_h_ep0_state {
165	MUSB_EP0_IDLE,
166	MUSB_EP0_START, /* expect ack of setup */
167	MUSB_EP0_IN, /* expect IN DATA */
168	MUSB_EP0_OUT, /* expect ack of OUT DATA */
169	MUSB_EP0_STATUS, /* expect ack of STATUS */
170	} __attribute__ ((packed));
171
172	/* peripheral side ep0 states */
173	enum musb_g_ep0_state {
174	MUSB_EP0_STAGE_SETUP, /* idle, waiting for setup */
175	MUSB_EP0_STAGE_TX, /* IN data */
176	MUSB_EP0_STAGE_RX, /* OUT data */
177	MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */
178	MUSB_EP0_STAGE_STATUSOUT, /* (after IN data) */
179	MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */
180	} __attribute__ ((packed));
181
182	/* OTG protocol constants */
183	#define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */
184	#define OTG_TIME_A_WAIT_BCON 0 /* 0=infinite; min 1000 msec */
185	#define OTG_TIME_A_IDLE_BDIS 200 /* msec (min) */
186
187	/************************* REGISTER ACCESS ******************************/
188
189	/* Endpoint registers (other than dynfifo setup) can be accessed either
190	* directly with the "flat" model, or after setting up an index register.
191	*/
192
193	#if defined(CONFIG_ARCH_DAVINCI) \|\| defined(CONFIG_ARCH_OMAP2430) \
194	\|\| defined(CONFIG_ARCH_OMAP3430)
195	/* REVISIT indexed access seemed to
196	* misbehave (on DaVinci) for at least peripheral IN ...
197	*/
198	#define MUSB_FLAT_REG
199	#endif
200
201	/* TUSB mapping: "flat" plus ep0 special cases */
202	#if defined(CONFIG_USB_TUSB6010)
203	#define musb_ep_select(_mbase, _epnum) \
204	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
205	#define MUSB_EP_OFFSET MUSB_TUSB_OFFSET
206
207	/* "flat" mapping: each endpoint has its own i/o address */
208	#elif defined(MUSB_FLAT_REG)
209	#define musb_ep_select(_mbase, _epnum) (((void)(_mbase)), ((void)(_epnum)))
210	#define MUSB_EP_OFFSET MUSB_FLAT_OFFSET
211
212	/* "indexed" mapping: INDEX register controls register bank select */
213	#else
214	#define musb_ep_select(_mbase, _epnum) \
215	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
216	#define MUSB_EP_OFFSET MUSB_INDEXED_OFFSET
217	#endif
218
219	/**************************** FUNCTIONS ******************************/
220
221	#define MUSB_HST_MODE(_musb)\
222	{ (_musb)->is_host = true; }
223	#define MUSB_DEV_MODE(_musb) \
224	{ (_musb)->is_host = false; }
225
226	#define test_devctl_hst_mode(_x) \
227	(musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)
228
229	#define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")
230
231	/****************************** TYPES ***********************************/
232
233	/*
234	* struct musb_hw_ep - endpoint hardware (bidirectional)
235	*
236	* Ordered slightly for better cacheline locality.
237	*/
238	struct musb_hw_ep {
239	struct musb *musb;
240	void __iomem *fifo;
241	void __iomem *regs;
242
243	#ifdef CONFIG_USB_TUSB6010
244	void __iomem *conf;
245	#endif
246
247	/* index in musb->endpoints[] */
248	u8 epnum;
249
250	/* hardware configuration, possibly dynamic */
251	bool is_shared_fifo;
252	bool tx_double_buffered;
253	bool rx_double_buffered;
254	u16 max_packet_sz_tx;
255	u16 max_packet_sz_rx;
256
257	struct dma_channel *tx_channel;
258	struct dma_channel *rx_channel;
259
260	#ifdef CONFIG_USB_TUSB6010
261	/* TUSB has "asynchronous" and "synchronous" dma modes */
262	dma_addr_t fifo_async;
263	dma_addr_t fifo_sync;
264	void __iomem *fifo_sync_va;
265	#endif
266
267	#ifdef CONFIG_USB_MUSB_HDRC_HCD
268	void __iomem *target_regs;
269
270	/* currently scheduled peripheral endpoint */
271	struct musb_qh *in_qh;
272	struct musb_qh *out_qh;
273
274	u8 rx_reinit;
275	u8 tx_reinit;
276	#endif
277
278	#ifdef CONFIG_USB_GADGET_MUSB_HDRC
279	/* peripheral side */
280	struct musb_ep ep_in; /* TX */
281	struct musb_ep ep_out; /* RX */
282	#endif
283	};
284
285	static inline struct usb_request next_in_request(struct musb_hw_ep hw_ep)
286	{
287	#ifdef CONFIG_USB_GADGET_MUSB_HDRC
288	return next_request(&hw_ep->ep_in);
289	#else
290	return NULL;
291	#endif
292	}
293
294	static inline struct usb_request next_out_request(struct musb_hw_ep hw_ep)
295	{
296	#ifdef CONFIG_USB_GADGET_MUSB_HDRC
297	return next_request(&hw_ep->ep_out);
298	#else
299	return NULL;
300	#endif
301	}
302
303	/*
304	* struct musb - Driver instance data.
305	*/
306	struct musb {
307	/* device lock */
308	spinlock_t lock;
309	struct clk *clock;
310	irqreturn_t (isr)(int, void );
311	struct work_struct irq_work;
312
313	/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
314	#define MUSB_PORT_STAT_RESUME (1 << 31)
315
316	u32 port1_status;
317
318	#ifdef CONFIG_USB_MUSB_HDRC_HCD
319	unsigned long rh_timer;
320
321	enum musb_h_ep0_state ep0_stage;
322
323	/* bulk traffic normally dedicates endpoint hardware, and each
324	* direction has its own ring of host side endpoints.
325	* we try to progress the transfer at the head of each endpoint's
326	* queue until it completes or NAKs too much; then we try the next
327	* endpoint.
328	*/
329	struct musb_hw_ep *bulk_ep;
330
331	struct list_head control; /* of musb_qh */
332	struct list_head in_bulk; /* of musb_qh */
333	struct list_head out_bulk; /* of musb_qh */
334	struct musb_qh periodic[32]; / tree of interrupt+iso */
335	#endif
336
337	/* called with IRQs blocked; ON/nonzero implies starting a session,
338	* and waiting at least a_wait_vrise_tmout.
339	*/
340	void (board_set_vbus)(struct musb , int is_on);
341
342	struct dma_controller *dma_controller;
343
344	struct device *controller;
345	void __iomem *ctrl_base;
346	void __iomem *mregs;
347
348	#ifdef CONFIG_USB_TUSB6010
349	dma_addr_t async;
350	dma_addr_t sync;
351	void __iomem *sync_va;
352	#endif
353
354	/* passed down from chip/board specific irq handlers */
355	u8 int_usb;
356	u16 int_rx;
357	u16 int_tx;
358
359	struct otg_transceiver xceiv;
360
361	int nIrq;
c48a5155	362	unsigned irq_wake:1;
550a7375 FB	363
	364	struct musb_hw_ep endpoints[MUSB_C_NUM_EPS];
	365	#define control_ep endpoints
	366
	367	#define VBUSERR_RETRY_COUNT 3
	368	u16 vbuserr_retry;
	369	u16 epmask;
	370	u8 nr_endpoints;
	371
	372	u8 board_mode; /* enum musb_mode */
	373	int (*board_set_power)(int state);
	374
	375	int (set_clock)(struct clk clk, int is_active);
	376
	377	u8 min_power; /* vbus for periph, in mA/2 */
	378
	379	bool is_host;
	380
	381	int a_wait_bcon; /* VBUS timeout in msecs */
	382	unsigned long idle_timeout; /* Next timeout in jiffies */
	383
	384	/* active means connected and not suspended */
	385	unsigned is_active:1;
	386
	387	unsigned is_multipoint:1;
	388	unsigned ignore_disconnect:1; /* during bus resets */
	389
	390	#ifdef C_MP_TX
	391	unsigned bulk_split:1;
	392	#define can_bulk_split(musb,type) \
	393	(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
	394	#else
	395	#define can_bulk_split(musb, type) 0
	396	#endif
	397
	398	#ifdef C_MP_RX
	399	unsigned bulk_combine:1;
	400	#define can_bulk_combine(musb,type) \
	401	(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
	402	#else
	403	#define can_bulk_combine(musb, type) 0
	404	#endif
	405
	406	#ifdef CONFIG_USB_GADGET_MUSB_HDRC
	407	/* is_suspended means USB B_PERIPHERAL suspend */
	408	unsigned is_suspended:1;
	409
	410	/* may_wakeup means remote wakeup is enabled */
	411	unsigned may_wakeup:1;
	412
	413	/* is_self_powered is reported in device status and the
	414	* config descriptor. is_bus_powered means B_PERIPHERAL
	415	* draws some VBUS current; both can be true.
	416	*/
	417	unsigned is_self_powered:1;
	418	unsigned is_bus_powered:1;
	419
	420	unsigned set_address:1;
	421	unsigned test_mode:1;
	422	unsigned softconnect:1;
	423
	424	u8 address;
	425	u8 test_mode_nr;
	426	u16 ackpend; /* ep0 */
427	enum musb_g_ep0_state ep0_state;
428	struct usb_gadget g; /* the gadget */
429	struct usb_gadget_driver gadget_driver; / its driver */
430	#endif
431
ca6d1b13 FB	432	struct musb_hdrc_config *config;
ca6d1b13 FB	433
550a7375 FB	434	#ifdef MUSB_CONFIG_PROC_FS
	435	struct proc_dir_entry *proc_entry;
	436	#endif
	437	};
	438
	439	static inline void musb_set_vbus(struct musb *musb, int is_on)
	440	{
	441	musb->board_set_vbus(musb, is_on);
	442	}
	443
	444	#ifdef CONFIG_USB_GADGET_MUSB_HDRC
	445	static inline struct musb gadget_to_musb(struct usb_gadget g)
	446	{
	447	return container_of(g, struct musb, g);
	448	}
	449	#endif
	450
	451
	452	/*************************** Glue it together ***************************/
	453
	454	extern const char musb_driver_name[];
	455
	456	extern void musb_start(struct musb *musb);
	457	extern void musb_stop(struct musb *musb);
	458
	459	extern void musb_write_fifo(struct musb_hw_ep ep, u16 len, const u8 src);
	460	extern void musb_read_fifo(struct musb_hw_ep ep, u16 len, u8 dst);
	461
	462	extern void musb_load_testpacket(struct musb *);
	463
	464	extern irqreturn_t musb_interrupt(struct musb *);
	465
	466	extern void musb_platform_enable(struct musb *musb);
	467	extern void musb_platform_disable(struct musb *musb);
	468
	469	extern void musb_hnp_stop(struct musb *musb);
	470
96a274d1	471	extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
550a7375 FB	472
	473	#if defined(CONFIG_USB_TUSB6010) \|\| \
	474	defined(CONFIG_ARCH_OMAP2430) \|\| defined(CONFIG_ARCH_OMAP34XX)
	475	extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
	476	#else
	477	#define musb_platform_try_idle(x, y) do {} while (0)
	478	#endif
	479
	480	#ifdef CONFIG_USB_TUSB6010
	481	extern int musb_platform_get_vbus_status(struct musb *musb);
	482	#else
	483	#define musb_platform_get_vbus_status(x) 0
	484	#endif
	485
	486	extern int __init musb_platform_init(struct musb *musb);
	487	extern int musb_platform_exit(struct musb *musb);
	488
550a7375	489	#endif /* __MUSB_CORE_H__ */