Commit | Line | Data |
---|---|---|
5d304358 YS |
1 | /* |
2 | * R8A66597 HCD (Host Controller Driver) | |
3 | * | |
4 | * Copyright (C) 2006-2007 Renesas Solutions Corp. | |
5 | * Portions Copyright (C) 2004 Psion Teklogix (for NetBook PRO) | |
6 | * Portions Copyright (C) 2004-2005 David Brownell | |
7 | * Portions Copyright (C) 1999 Roman Weissgaerber | |
8 | * | |
9 | * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License as published by | |
13 | * the Free Software Foundation; version 2 of the License. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
23 | * | |
24 | */ | |
25 | ||
26 | #ifndef __R8A66597_H__ | |
27 | #define __R8A66597_H__ | |
28 | ||
765786e0 MD |
29 | #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) |
30 | #include <linux/clk.h> | |
31 | #endif | |
32 | ||
5effabbe YS |
33 | #include <linux/usb/r8a66597.h> |
34 | ||
5d304358 YS |
35 | #define SYSCFG0 0x00 |
36 | #define SYSCFG1 0x02 | |
37 | #define SYSSTS0 0x04 | |
38 | #define SYSSTS1 0x06 | |
39 | #define DVSTCTR0 0x08 | |
40 | #define DVSTCTR1 0x0A | |
41 | #define TESTMODE 0x0C | |
42 | #define PINCFG 0x0E | |
43 | #define DMA0CFG 0x10 | |
44 | #define DMA1CFG 0x12 | |
45 | #define CFIFO 0x14 | |
46 | #define D0FIFO 0x18 | |
47 | #define D1FIFO 0x1C | |
48 | #define CFIFOSEL 0x20 | |
49 | #define CFIFOCTR 0x22 | |
50 | #define CFIFOSIE 0x24 | |
51 | #define D0FIFOSEL 0x28 | |
52 | #define D0FIFOCTR 0x2A | |
53 | #define D1FIFOSEL 0x2C | |
54 | #define D1FIFOCTR 0x2E | |
55 | #define INTENB0 0x30 | |
56 | #define INTENB1 0x32 | |
57 | #define INTENB2 0x34 | |
58 | #define BRDYENB 0x36 | |
59 | #define NRDYENB 0x38 | |
60 | #define BEMPENB 0x3A | |
61 | #define SOFCFG 0x3C | |
62 | #define INTSTS0 0x40 | |
63 | #define INTSTS1 0x42 | |
64 | #define INTSTS2 0x44 | |
65 | #define BRDYSTS 0x46 | |
66 | #define NRDYSTS 0x48 | |
67 | #define BEMPSTS 0x4A | |
68 | #define FRMNUM 0x4C | |
69 | #define UFRMNUM 0x4E | |
70 | #define USBADDR 0x50 | |
71 | #define USBREQ 0x54 | |
72 | #define USBVAL 0x56 | |
73 | #define USBINDX 0x58 | |
74 | #define USBLENG 0x5A | |
75 | #define DCPCFG 0x5C | |
76 | #define DCPMAXP 0x5E | |
77 | #define DCPCTR 0x60 | |
78 | #define PIPESEL 0x64 | |
79 | #define PIPECFG 0x68 | |
80 | #define PIPEBUF 0x6A | |
81 | #define PIPEMAXP 0x6C | |
82 | #define PIPEPERI 0x6E | |
83 | #define PIPE1CTR 0x70 | |
84 | #define PIPE2CTR 0x72 | |
85 | #define PIPE3CTR 0x74 | |
86 | #define PIPE4CTR 0x76 | |
87 | #define PIPE5CTR 0x78 | |
88 | #define PIPE6CTR 0x7A | |
89 | #define PIPE7CTR 0x7C | |
90 | #define PIPE8CTR 0x7E | |
91 | #define PIPE9CTR 0x80 | |
92 | #define PIPE1TRE 0x90 | |
93 | #define PIPE1TRN 0x92 | |
94 | #define PIPE2TRE 0x94 | |
95 | #define PIPE2TRN 0x96 | |
96 | #define PIPE3TRE 0x98 | |
97 | #define PIPE3TRN 0x9A | |
98 | #define PIPE4TRE 0x9C | |
99 | #define PIPE4TRN 0x9E | |
100 | #define PIPE5TRE 0xA0 | |
101 | #define PIPE5TRN 0xA2 | |
102 | #define DEVADD0 0xD0 | |
103 | #define DEVADD1 0xD2 | |
104 | #define DEVADD2 0xD4 | |
105 | #define DEVADD3 0xD6 | |
106 | #define DEVADD4 0xD8 | |
107 | #define DEVADD5 0xDA | |
108 | #define DEVADD6 0xDC | |
109 | #define DEVADD7 0xDE | |
110 | #define DEVADD8 0xE0 | |
111 | #define DEVADD9 0xE2 | |
112 | #define DEVADDA 0xE4 | |
113 | ||
114 | /* System Configuration Control Register */ | |
115 | #define XTAL 0xC000 /* b15-14: Crystal selection */ | |
116 | #define XTAL48 0x8000 /* 48MHz */ | |
117 | #define XTAL24 0x4000 /* 24MHz */ | |
118 | #define XTAL12 0x0000 /* 12MHz */ | |
119 | #define XCKE 0x2000 /* b13: External clock enable */ | |
120 | #define PLLC 0x0800 /* b11: PLL control */ | |
121 | #define SCKE 0x0400 /* b10: USB clock enable */ | |
122 | #define PCSDIS 0x0200 /* b9: not CS wakeup */ | |
123 | #define LPSME 0x0100 /* b8: Low power sleep mode */ | |
124 | #define HSE 0x0080 /* b7: Hi-speed enable */ | |
125 | #define DCFM 0x0040 /* b6: Controller function select */ | |
126 | #define DRPD 0x0020 /* b5: D+/- pull down control */ | |
127 | #define DPRPU 0x0010 /* b4: D+ pull up control */ | |
128 | #define USBE 0x0001 /* b0: USB module operation enable */ | |
129 | ||
130 | /* System Configuration Status Register */ | |
131 | #define OVCBIT 0x8000 /* b15-14: Over-current bit */ | |
132 | #define OVCMON 0xC000 /* b15-14: Over-current monitor */ | |
133 | #define SOFEA 0x0020 /* b5: SOF monitor */ | |
134 | #define IDMON 0x0004 /* b3: ID-pin monitor */ | |
135 | #define LNST 0x0003 /* b1-0: D+, D- line status */ | |
136 | #define SE1 0x0003 /* SE1 */ | |
137 | #define FS_KSTS 0x0002 /* Full-Speed K State */ | |
138 | #define FS_JSTS 0x0001 /* Full-Speed J State */ | |
139 | #define LS_JSTS 0x0002 /* Low-Speed J State */ | |
140 | #define LS_KSTS 0x0001 /* Low-Speed K State */ | |
141 | #define SE0 0x0000 /* SE0 */ | |
142 | ||
143 | /* Device State Control Register */ | |
144 | #define EXTLP0 0x0400 /* b10: External port */ | |
145 | #define VBOUT 0x0200 /* b9: VBUS output */ | |
146 | #define WKUP 0x0100 /* b8: Remote wakeup */ | |
147 | #define RWUPE 0x0080 /* b7: Remote wakeup sense */ | |
148 | #define USBRST 0x0040 /* b6: USB reset enable */ | |
149 | #define RESUME 0x0020 /* b5: Resume enable */ | |
150 | #define UACT 0x0010 /* b4: USB bus enable */ | |
151 | #define RHST 0x0007 /* b1-0: Reset handshake status */ | |
152 | #define HSPROC 0x0004 /* HS handshake is processing */ | |
153 | #define HSMODE 0x0003 /* Hi-Speed mode */ | |
154 | #define FSMODE 0x0002 /* Full-Speed mode */ | |
155 | #define LSMODE 0x0001 /* Low-Speed mode */ | |
156 | #define UNDECID 0x0000 /* Undecided */ | |
157 | ||
158 | /* Test Mode Register */ | |
159 | #define UTST 0x000F /* b3-0: Test select */ | |
160 | #define H_TST_PACKET 0x000C /* HOST TEST Packet */ | |
161 | #define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */ | |
162 | #define H_TST_K 0x000A /* HOST TEST K */ | |
163 | #define H_TST_J 0x0009 /* HOST TEST J */ | |
164 | #define H_TST_NORMAL 0x0000 /* HOST Normal Mode */ | |
165 | #define P_TST_PACKET 0x0004 /* PERI TEST Packet */ | |
166 | #define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */ | |
167 | #define P_TST_K 0x0002 /* PERI TEST K */ | |
168 | #define P_TST_J 0x0001 /* PERI TEST J */ | |
169 | #define P_TST_NORMAL 0x0000 /* PERI Normal Mode */ | |
170 | ||
171 | /* Data Pin Configuration Register */ | |
172 | #define LDRV 0x8000 /* b15: Drive Current Adjust */ | |
173 | #define VIF1 0x0000 /* VIF = 1.8V */ | |
174 | #define VIF3 0x8000 /* VIF = 3.3V */ | |
175 | #define INTA 0x0001 /* b1: USB INT-pin active */ | |
176 | ||
177 | /* DMAx Pin Configuration Register */ | |
178 | #define DREQA 0x4000 /* b14: Dreq active select */ | |
179 | #define BURST 0x2000 /* b13: Burst mode */ | |
180 | #define DACKA 0x0400 /* b10: Dack active select */ | |
181 | #define DFORM 0x0380 /* b9-7: DMA mode select */ | |
182 | #define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */ | |
183 | #define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */ | |
184 | #define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */ | |
185 | #define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */ | |
186 | #define DENDA 0x0040 /* b6: Dend active select */ | |
187 | #define PKTM 0x0020 /* b5: Packet mode */ | |
188 | #define DENDE 0x0010 /* b4: Dend enable */ | |
189 | #define OBUS 0x0004 /* b2: OUTbus mode */ | |
190 | ||
191 | /* CFIFO/DxFIFO Port Select Register */ | |
192 | #define RCNT 0x8000 /* b15: Read count mode */ | |
193 | #define REW 0x4000 /* b14: Buffer rewind */ | |
194 | #define DCLRM 0x2000 /* b13: DMA buffer clear mode */ | |
195 | #define DREQE 0x1000 /* b12: DREQ output enable */ | |
9424ea29 YS |
196 | #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) |
197 | #define MBW 0x0800 | |
198 | #else | |
5d304358 | 199 | #define MBW 0x0400 /* b10: Maximum bit width for FIFO access */ |
9424ea29 | 200 | #endif |
5d304358 YS |
201 | #define MBW_8 0x0000 /* 8bit */ |
202 | #define MBW_16 0x0400 /* 16bit */ | |
203 | #define BIGEND 0x0100 /* b8: Big endian mode */ | |
204 | #define BYTE_LITTLE 0x0000 /* little dendian */ | |
205 | #define BYTE_BIG 0x0100 /* big endifan */ | |
206 | #define ISEL 0x0020 /* b5: DCP FIFO port direction select */ | |
207 | #define CURPIPE 0x000F /* b2-0: PIPE select */ | |
208 | ||
209 | /* CFIFO/DxFIFO Port Control Register */ | |
210 | #define BVAL 0x8000 /* b15: Buffer valid flag */ | |
211 | #define BCLR 0x4000 /* b14: Buffer clear */ | |
212 | #define FRDY 0x2000 /* b13: FIFO ready */ | |
213 | #define DTLN 0x0FFF /* b11-0: FIFO received data length */ | |
214 | ||
215 | /* Interrupt Enable Register 0 */ | |
e294531d YS |
216 | #define VBSE 0x8000 /* b15: VBUS interrupt */ |
217 | #define RSME 0x4000 /* b14: Resume interrupt */ | |
218 | #define SOFE 0x2000 /* b13: Frame update interrupt */ | |
219 | #define DVSE 0x1000 /* b12: Device state transition interrupt */ | |
220 | #define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */ | |
221 | #define BEMPE 0x0400 /* b10: Buffer empty interrupt */ | |
222 | #define NRDYE 0x0200 /* b9: Buffer not ready interrupt */ | |
223 | #define BRDYE 0x0100 /* b8: Buffer ready interrupt */ | |
5d304358 YS |
224 | |
225 | /* Interrupt Enable Register 1 */ | |
226 | #define OVRCRE 0x8000 /* b15: Over-current interrupt */ | |
227 | #define BCHGE 0x4000 /* b14: USB us chenge interrupt */ | |
228 | #define DTCHE 0x1000 /* b12: Detach sense interrupt */ | |
229 | #define ATTCHE 0x0800 /* b11: Attach sense interrupt */ | |
230 | #define EOFERRE 0x0040 /* b6: EOF error interrupt */ | |
231 | #define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */ | |
232 | #define SACKE 0x0010 /* b4: SETUP ACK interrupt */ | |
233 | ||
234 | /* BRDY Interrupt Enable/Status Register */ | |
235 | #define BRDY9 0x0200 /* b9: PIPE9 */ | |
236 | #define BRDY8 0x0100 /* b8: PIPE8 */ | |
237 | #define BRDY7 0x0080 /* b7: PIPE7 */ | |
238 | #define BRDY6 0x0040 /* b6: PIPE6 */ | |
239 | #define BRDY5 0x0020 /* b5: PIPE5 */ | |
240 | #define BRDY4 0x0010 /* b4: PIPE4 */ | |
241 | #define BRDY3 0x0008 /* b3: PIPE3 */ | |
242 | #define BRDY2 0x0004 /* b2: PIPE2 */ | |
243 | #define BRDY1 0x0002 /* b1: PIPE1 */ | |
244 | #define BRDY0 0x0001 /* b1: PIPE0 */ | |
245 | ||
246 | /* NRDY Interrupt Enable/Status Register */ | |
247 | #define NRDY9 0x0200 /* b9: PIPE9 */ | |
248 | #define NRDY8 0x0100 /* b8: PIPE8 */ | |
249 | #define NRDY7 0x0080 /* b7: PIPE7 */ | |
250 | #define NRDY6 0x0040 /* b6: PIPE6 */ | |
251 | #define NRDY5 0x0020 /* b5: PIPE5 */ | |
252 | #define NRDY4 0x0010 /* b4: PIPE4 */ | |
253 | #define NRDY3 0x0008 /* b3: PIPE3 */ | |
254 | #define NRDY2 0x0004 /* b2: PIPE2 */ | |
255 | #define NRDY1 0x0002 /* b1: PIPE1 */ | |
256 | #define NRDY0 0x0001 /* b1: PIPE0 */ | |
257 | ||
258 | /* BEMP Interrupt Enable/Status Register */ | |
259 | #define BEMP9 0x0200 /* b9: PIPE9 */ | |
260 | #define BEMP8 0x0100 /* b8: PIPE8 */ | |
261 | #define BEMP7 0x0080 /* b7: PIPE7 */ | |
262 | #define BEMP6 0x0040 /* b6: PIPE6 */ | |
263 | #define BEMP5 0x0020 /* b5: PIPE5 */ | |
264 | #define BEMP4 0x0010 /* b4: PIPE4 */ | |
265 | #define BEMP3 0x0008 /* b3: PIPE3 */ | |
266 | #define BEMP2 0x0004 /* b2: PIPE2 */ | |
267 | #define BEMP1 0x0002 /* b1: PIPE1 */ | |
268 | #define BEMP0 0x0001 /* b0: PIPE0 */ | |
269 | ||
270 | /* SOF Pin Configuration Register */ | |
271 | #define TRNENSEL 0x0100 /* b8: Select transaction enable period */ | |
272 | #define BRDYM 0x0040 /* b6: BRDY clear timing */ | |
273 | #define INTL 0x0020 /* b5: Interrupt sense select */ | |
274 | #define EDGESTS 0x0010 /* b4: */ | |
275 | #define SOFMODE 0x000C /* b3-2: SOF pin select */ | |
276 | #define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */ | |
277 | #define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */ | |
278 | #define SOF_DISABLE 0x0000 /* SOF OUT Disable */ | |
279 | ||
280 | /* Interrupt Status Register 0 */ | |
e294531d YS |
281 | #define VBINT 0x8000 /* b15: VBUS interrupt */ |
282 | #define RESM 0x4000 /* b14: Resume interrupt */ | |
283 | #define SOFR 0x2000 /* b13: SOF frame update interrupt */ | |
284 | #define DVST 0x1000 /* b12: Device state transition interrupt */ | |
285 | #define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */ | |
286 | #define BEMP 0x0400 /* b10: Buffer empty interrupt */ | |
287 | #define NRDY 0x0200 /* b9: Buffer not ready interrupt */ | |
288 | #define BRDY 0x0100 /* b8: Buffer ready interrupt */ | |
289 | #define VBSTS 0x0080 /* b7: VBUS input port */ | |
290 | #define DVSQ 0x0070 /* b6-4: Device state */ | |
5d304358 YS |
291 | #define DS_SPD_CNFG 0x0070 /* Suspend Configured */ |
292 | #define DS_SPD_ADDR 0x0060 /* Suspend Address */ | |
293 | #define DS_SPD_DFLT 0x0050 /* Suspend Default */ | |
294 | #define DS_SPD_POWR 0x0040 /* Suspend Powered */ | |
295 | #define DS_SUSP 0x0040 /* Suspend */ | |
296 | #define DS_CNFG 0x0030 /* Configured */ | |
297 | #define DS_ADDS 0x0020 /* Address */ | |
298 | #define DS_DFLT 0x0010 /* Default */ | |
299 | #define DS_POWR 0x0000 /* Powered */ | |
300 | #define DVSQS 0x0030 /* b5-4: Device state */ | |
301 | #define VALID 0x0008 /* b3: Setup packet detected flag */ | |
302 | #define CTSQ 0x0007 /* b2-0: Control transfer stage */ | |
303 | #define CS_SQER 0x0006 /* Sequence error */ | |
304 | #define CS_WRND 0x0005 /* Control write nodata status stage */ | |
305 | #define CS_WRSS 0x0004 /* Control write status stage */ | |
306 | #define CS_WRDS 0x0003 /* Control write data stage */ | |
307 | #define CS_RDSS 0x0002 /* Control read status stage */ | |
308 | #define CS_RDDS 0x0001 /* Control read data stage */ | |
309 | #define CS_IDST 0x0000 /* Idle or setup stage */ | |
310 | ||
311 | /* Interrupt Status Register 1 */ | |
312 | #define OVRCR 0x8000 /* b15: Over-current interrupt */ | |
313 | #define BCHG 0x4000 /* b14: USB bus chenge interrupt */ | |
314 | #define DTCH 0x1000 /* b12: Detach sense interrupt */ | |
315 | #define ATTCH 0x0800 /* b11: Attach sense interrupt */ | |
316 | #define EOFERR 0x0040 /* b6: EOF-error interrupt */ | |
317 | #define SIGN 0x0020 /* b5: Setup ignore interrupt */ | |
318 | #define SACK 0x0010 /* b4: Setup acknowledge interrupt */ | |
319 | ||
320 | /* Frame Number Register */ | |
321 | #define OVRN 0x8000 /* b15: Overrun error */ | |
322 | #define CRCE 0x4000 /* b14: Received data error */ | |
323 | #define FRNM 0x07FF /* b10-0: Frame number */ | |
324 | ||
325 | /* Micro Frame Number Register */ | |
326 | #define UFRNM 0x0007 /* b2-0: Micro frame number */ | |
327 | ||
5d304358 YS |
328 | /* Default Control Pipe Maxpacket Size Register */ |
329 | /* Pipe Maxpacket Size Register */ | |
e294531d YS |
330 | #define DEVSEL 0xF000 /* b15-14: Device address select */ |
331 | #define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */ | |
5d304358 YS |
332 | |
333 | /* Default Control Pipe Control Register */ | |
334 | #define BSTS 0x8000 /* b15: Buffer status */ | |
335 | #define SUREQ 0x4000 /* b14: Send USB request */ | |
336 | #define CSCLR 0x2000 /* b13: complete-split status clear */ | |
337 | #define CSSTS 0x1000 /* b12: complete-split status */ | |
338 | #define SUREQCLR 0x0800 /* b11: stop setup request */ | |
339 | #define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ | |
340 | #define SQSET 0x0080 /* b7: Sequence toggle bit set */ | |
341 | #define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ | |
342 | #define PBUSY 0x0020 /* b5: pipe busy */ | |
343 | #define PINGE 0x0010 /* b4: ping enable */ | |
344 | #define CCPL 0x0004 /* b2: Enable control transfer complete */ | |
345 | #define PID 0x0003 /* b1-0: Response PID */ | |
346 | #define PID_STALL11 0x0003 /* STALL */ | |
347 | #define PID_STALL 0x0002 /* STALL */ | |
348 | #define PID_BUF 0x0001 /* BUF */ | |
349 | #define PID_NAK 0x0000 /* NAK */ | |
350 | ||
351 | /* Pipe Window Select Register */ | |
352 | #define PIPENM 0x0007 /* b2-0: Pipe select */ | |
353 | ||
354 | /* Pipe Configuration Register */ | |
355 | #define R8A66597_TYP 0xC000 /* b15-14: Transfer type */ | |
356 | #define R8A66597_ISO 0xC000 /* Isochronous */ | |
357 | #define R8A66597_INT 0x8000 /* Interrupt */ | |
358 | #define R8A66597_BULK 0x4000 /* Bulk */ | |
359 | #define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */ | |
360 | #define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */ | |
361 | #define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */ | |
362 | #define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */ | |
363 | #define R8A66597_DIR 0x0010 /* b4: Transfer direction select */ | |
364 | #define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */ | |
365 | ||
366 | /* Pipe Buffer Configuration Register */ | |
367 | #define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */ | |
368 | #define BUFNMB 0x007F /* b6-0: Pipe buffer number */ | |
369 | #define PIPE0BUF 256 | |
370 | #define PIPExBUF 64 | |
371 | ||
372 | /* Pipe Maxpacket Size Register */ | |
373 | #define MXPS 0x07FF /* b10-0: Maxpacket size */ | |
374 | ||
375 | /* Pipe Cycle Configuration Register */ | |
e294531d YS |
376 | #define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */ |
377 | #define IITV 0x0007 /* b2-0: Isochronous interval */ | |
5d304358 YS |
378 | |
379 | /* Pipex Control Register */ | |
e294531d YS |
380 | #define BSTS 0x8000 /* b15: Buffer status */ |
381 | #define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */ | |
382 | #define CSCLR 0x2000 /* b13: complete-split status clear */ | |
383 | #define CSSTS 0x1000 /* b12: complete-split status */ | |
384 | #define ATREPM 0x0400 /* b10: Auto repeat mode */ | |
385 | #define ACLRM 0x0200 /* b9: Out buffer auto clear mode */ | |
386 | #define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ | |
387 | #define SQSET 0x0080 /* b7: Sequence toggle bit set */ | |
388 | #define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ | |
389 | #define PBUSY 0x0020 /* b5: pipe busy */ | |
390 | #define PID 0x0003 /* b1-0: Response PID */ | |
5d304358 YS |
391 | |
392 | /* PIPExTRE */ | |
393 | #define TRENB 0x0200 /* b9: Transaction counter enable */ | |
394 | #define TRCLR 0x0100 /* b8: Transaction counter clear */ | |
395 | ||
396 | /* PIPExTRN */ | |
397 | #define TRNCNT 0xFFFF /* b15-0: Transaction counter */ | |
398 | ||
399 | /* DEVADDx */ | |
400 | #define UPPHUB 0x7800 | |
401 | #define HUBPORT 0x0700 | |
402 | #define USBSPD 0x00C0 | |
403 | #define RTPORT 0x0001 | |
404 | ||
405 | #define R8A66597_MAX_NUM_PIPE 10 | |
406 | #define R8A66597_BUF_BSIZE 8 | |
407 | #define R8A66597_MAX_DEVICE 10 | |
9424ea29 YS |
408 | #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) |
409 | #define R8A66597_MAX_ROOT_HUB 1 | |
410 | #else | |
5d304358 | 411 | #define R8A66597_MAX_ROOT_HUB 2 |
9424ea29 | 412 | #endif |
29fab0cd YS |
413 | #define R8A66597_MAX_SAMPLING 5 |
414 | #define R8A66597_RH_POLL_TIME 10 | |
5d304358 YS |
415 | #define R8A66597_MAX_DMA_CHANNEL 2 |
416 | #define R8A66597_PIPE_NO_DMA R8A66597_MAX_DMA_CHANNEL | |
417 | #define check_bulk_or_isoc(pipenum) ((pipenum >= 1 && pipenum <= 5)) | |
418 | #define check_interrupt(pipenum) ((pipenum >= 6 && pipenum <= 9)) | |
419 | #define make_devsel(addr) (addr << 12) | |
420 | ||
421 | struct r8a66597_pipe_info { | |
6d879107 | 422 | unsigned long timer_interval; |
e294531d | 423 | u16 pipenum; |
dc0d5c1e | 424 | u16 address; /* R8A66597 HCD usb address */ |
e294531d YS |
425 | u16 epnum; |
426 | u16 maxpacket; | |
427 | u16 type; | |
428 | u16 bufnum; | |
429 | u16 buf_bsize; | |
430 | u16 interval; | |
431 | u16 dir_in; | |
5d304358 YS |
432 | }; |
433 | ||
434 | struct r8a66597_pipe { | |
435 | struct r8a66597_pipe_info info; | |
436 | ||
437 | unsigned long fifoaddr; | |
438 | unsigned long fifosel; | |
439 | unsigned long fifoctr; | |
440 | unsigned long pipectr; | |
441 | unsigned long pipetre; | |
442 | unsigned long pipetrn; | |
443 | }; | |
444 | ||
445 | struct r8a66597_td { | |
446 | struct r8a66597_pipe *pipe; | |
447 | struct urb *urb; | |
448 | struct list_head queue; | |
449 | ||
450 | u16 type; | |
451 | u16 pipenum; | |
452 | int iso_cnt; | |
453 | ||
454 | u16 address; /* R8A66597's USB address */ | |
455 | u16 maxpacket; | |
456 | ||
457 | unsigned zero_packet:1; | |
458 | unsigned short_packet:1; | |
459 | unsigned set_address:1; | |
460 | }; | |
461 | ||
462 | struct r8a66597_device { | |
463 | u16 address; /* R8A66597's USB address */ | |
464 | u16 hub_port; | |
465 | u16 root_port; | |
466 | ||
467 | unsigned short ep_in_toggle; | |
468 | unsigned short ep_out_toggle; | |
469 | unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE]; | |
470 | unsigned char dma_map; | |
471 | ||
472 | enum usb_device_state state; | |
473 | ||
474 | struct usb_device *udev; | |
475 | int usb_address; | |
476 | struct list_head device_list; | |
477 | }; | |
478 | ||
479 | struct r8a66597_root_hub { | |
480 | u32 port; | |
481 | u16 old_syssts; | |
482 | int scount; | |
483 | ||
484 | struct r8a66597_device *dev; | |
485 | }; | |
486 | ||
487 | struct r8a66597 { | |
488 | spinlock_t lock; | |
489 | unsigned long reg; | |
765786e0 MD |
490 | #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK) |
491 | struct clk *clk; | |
492 | #endif | |
5effabbe | 493 | struct r8a66597_platdata *pdata; |
5d304358 YS |
494 | struct r8a66597_device device0; |
495 | struct r8a66597_root_hub root_hub[R8A66597_MAX_ROOT_HUB]; | |
496 | struct list_head pipe_queue[R8A66597_MAX_NUM_PIPE]; | |
497 | ||
498 | struct timer_list rh_timer; | |
499 | struct timer_list td_timer[R8A66597_MAX_NUM_PIPE]; | |
6d879107 | 500 | struct timer_list interval_timer[R8A66597_MAX_NUM_PIPE]; |
5d304358 YS |
501 | |
502 | unsigned short address_map; | |
503 | unsigned short timeout_map; | |
6d879107 | 504 | unsigned short interval_map; |
5d304358 YS |
505 | unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE]; |
506 | unsigned char dma_map; | |
507 | ||
508 | struct list_head child_device; | |
509 | unsigned long child_connect_map[4]; | |
e1e609be YS |
510 | |
511 | unsigned bus_suspended:1; | |
5effabbe | 512 | unsigned irq_sense_low:1; |
5d304358 YS |
513 | }; |
514 | ||
515 | static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd) | |
516 | { | |
517 | return (struct r8a66597 *)(hcd->hcd_priv); | |
518 | } | |
519 | ||
520 | static inline struct usb_hcd *r8a66597_to_hcd(struct r8a66597 *r8a66597) | |
521 | { | |
522 | return container_of((void *)r8a66597, struct usb_hcd, hcd_priv); | |
523 | } | |
524 | ||
525 | static inline struct r8a66597_td *r8a66597_get_td(struct r8a66597 *r8a66597, | |
526 | u16 pipenum) | |
527 | { | |
528 | if (unlikely(list_empty(&r8a66597->pipe_queue[pipenum]))) | |
529 | return NULL; | |
530 | ||
531 | return list_entry(r8a66597->pipe_queue[pipenum].next, | |
532 | struct r8a66597_td, queue); | |
533 | } | |
534 | ||
535 | static inline struct urb *r8a66597_get_urb(struct r8a66597 *r8a66597, | |
536 | u16 pipenum) | |
537 | { | |
538 | struct r8a66597_td *td; | |
539 | ||
540 | td = r8a66597_get_td(r8a66597, pipenum); | |
541 | return (td ? td->urb : NULL); | |
542 | } | |
543 | ||
544 | static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset) | |
545 | { | |
546 | return inw(r8a66597->reg + offset); | |
547 | } | |
548 | ||
549 | static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597, | |
550 | unsigned long offset, u16 *buf, | |
551 | int len) | |
552 | { | |
9424ea29 YS |
553 | #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) |
554 | unsigned long fifoaddr = r8a66597->reg + offset; | |
555 | unsigned long count; | |
556 | ||
557 | count = len / 4; | |
558 | insl(fifoaddr, buf, count); | |
559 | ||
560 | if (len & 0x00000003) { | |
561 | unsigned long tmp = inl(fifoaddr); | |
562 | memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03); | |
563 | } | |
564 | #else | |
5d304358 YS |
565 | len = (len + 1) / 2; |
566 | insw(r8a66597->reg + offset, buf, len); | |
9424ea29 | 567 | #endif |
5d304358 YS |
568 | } |
569 | ||
570 | static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val, | |
571 | unsigned long offset) | |
572 | { | |
573 | outw(val, r8a66597->reg + offset); | |
574 | } | |
575 | ||
576 | static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, | |
577 | unsigned long offset, u16 *buf, | |
578 | int len) | |
579 | { | |
580 | unsigned long fifoaddr = r8a66597->reg + offset; | |
9424ea29 YS |
581 | #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) |
582 | unsigned long count; | |
583 | unsigned char *pb; | |
584 | int i; | |
585 | ||
586 | count = len / 4; | |
587 | outsl(fifoaddr, buf, count); | |
588 | ||
589 | if (len & 0x00000003) { | |
590 | pb = (unsigned char *)buf + count * 4; | |
591 | for (i = 0; i < (len & 0x00000003); i++) { | |
592 | if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND) | |
593 | outb(pb[i], fifoaddr + i); | |
594 | else | |
595 | outb(pb[i], fifoaddr + 3 - i); | |
596 | } | |
597 | } | |
598 | #else | |
5d304358 YS |
599 | int odd = len & 0x0001; |
600 | ||
601 | len = len / 2; | |
602 | outsw(fifoaddr, buf, len); | |
603 | if (unlikely(odd)) { | |
604 | buf = &buf[len]; | |
605 | outb((unsigned char)*buf, fifoaddr); | |
606 | } | |
9424ea29 | 607 | #endif |
5d304358 YS |
608 | } |
609 | ||
610 | static inline void r8a66597_mdfy(struct r8a66597 *r8a66597, | |
611 | u16 val, u16 pat, unsigned long offset) | |
612 | { | |
613 | u16 tmp; | |
614 | tmp = r8a66597_read(r8a66597, offset); | |
615 | tmp = tmp & (~pat); | |
616 | tmp = tmp | val; | |
617 | r8a66597_write(r8a66597, tmp, offset); | |
618 | } | |
619 | ||
620 | #define r8a66597_bclr(r8a66597, val, offset) \ | |
621 | r8a66597_mdfy(r8a66597, 0, val, offset) | |
622 | #define r8a66597_bset(r8a66597, val, offset) \ | |
623 | r8a66597_mdfy(r8a66597, val, 0, offset) | |
624 | ||
625 | static inline unsigned long get_syscfg_reg(int port) | |
626 | { | |
627 | return port == 0 ? SYSCFG0 : SYSCFG1; | |
628 | } | |
629 | ||
630 | static inline unsigned long get_syssts_reg(int port) | |
631 | { | |
632 | return port == 0 ? SYSSTS0 : SYSSTS1; | |
633 | } | |
634 | ||
635 | static inline unsigned long get_dvstctr_reg(int port) | |
636 | { | |
637 | return port == 0 ? DVSTCTR0 : DVSTCTR1; | |
638 | } | |
639 | ||
9424ea29 YS |
640 | static inline unsigned long get_dmacfg_reg(int port) |
641 | { | |
642 | return port == 0 ? DMA0CFG : DMA1CFG; | |
643 | } | |
644 | ||
5d304358 YS |
645 | static inline unsigned long get_intenb_reg(int port) |
646 | { | |
647 | return port == 0 ? INTENB1 : INTENB2; | |
648 | } | |
649 | ||
650 | static inline unsigned long get_intsts_reg(int port) | |
651 | { | |
652 | return port == 0 ? INTSTS1 : INTSTS2; | |
653 | } | |
654 | ||
655 | static inline u16 get_rh_usb_speed(struct r8a66597 *r8a66597, int port) | |
656 | { | |
657 | unsigned long dvstctr_reg = get_dvstctr_reg(port); | |
658 | ||
659 | return r8a66597_read(r8a66597, dvstctr_reg) & RHST; | |
660 | } | |
661 | ||
662 | static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port, | |
663 | int power) | |
664 | { | |
665 | unsigned long dvstctr_reg = get_dvstctr_reg(port); | |
666 | ||
5effabbe YS |
667 | if (r8a66597->pdata->port_power) { |
668 | r8a66597->pdata->port_power(port, power); | |
669 | } else { | |
670 | if (power) | |
671 | r8a66597_bset(r8a66597, VBOUT, dvstctr_reg); | |
672 | else | |
673 | r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg); | |
674 | } | |
675 | } | |
676 | ||
677 | static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata) | |
678 | { | |
679 | u16 clock = 0; | |
680 | ||
681 | switch (pdata->xtal) { | |
682 | case R8A66597_PLATDATA_XTAL_12MHZ: | |
683 | clock = XTAL12; | |
684 | break; | |
685 | case R8A66597_PLATDATA_XTAL_24MHZ: | |
686 | clock = XTAL24; | |
687 | break; | |
688 | case R8A66597_PLATDATA_XTAL_48MHZ: | |
689 | clock = XTAL48; | |
690 | break; | |
691 | default: | |
692 | printk(KERN_ERR "r8a66597: platdata clock is wrong.\n"); | |
693 | break; | |
694 | } | |
695 | ||
696 | return clock; | |
5d304358 YS |
697 | } |
698 | ||
699 | #define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2) | |
700 | #define get_pipetre_addr(pipenum) (PIPE1TRE + (pipenum - 1) * 4) | |
701 | #define get_pipetrn_addr(pipenum) (PIPE1TRN + (pipenum - 1) * 4) | |
702 | #define get_devadd_addr(address) (DEVADD0 + address * 2) | |
703 | ||
704 | #define enable_irq_ready(r8a66597, pipenum) \ | |
705 | enable_pipe_irq(r8a66597, pipenum, BRDYENB) | |
706 | #define disable_irq_ready(r8a66597, pipenum) \ | |
707 | disable_pipe_irq(r8a66597, pipenum, BRDYENB) | |
708 | #define enable_irq_empty(r8a66597, pipenum) \ | |
709 | enable_pipe_irq(r8a66597, pipenum, BEMPENB) | |
710 | #define disable_irq_empty(r8a66597, pipenum) \ | |
711 | disable_pipe_irq(r8a66597, pipenum, BEMPENB) | |
712 | #define enable_irq_nrdy(r8a66597, pipenum) \ | |
713 | enable_pipe_irq(r8a66597, pipenum, NRDYENB) | |
714 | #define disable_irq_nrdy(r8a66597, pipenum) \ | |
715 | disable_pipe_irq(r8a66597, pipenum, NRDYENB) | |
716 | ||
717 | #endif /* __R8A66597_H__ */ | |
718 |