Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * OHCI HCD (Host Controller Driver) for USB. | |
dd9048af | 3 | * |
1da177e4 LT |
4 | * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> |
5 | * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net> | |
dd9048af | 6 | * |
1da177e4 LT |
7 | * This file is licenced under GPL |
8 | */ | |
9 | ||
10 | /*-------------------------------------------------------------------------*/ | |
11 | ||
12 | /* | |
13 | * OHCI Root Hub ... the nonsharable stuff | |
14 | */ | |
15 | ||
16 | #define dbg_port(hc,label,num,value) \ | |
17 | ohci_dbg (hc, \ | |
18 | "%s roothub.portstatus [%d] " \ | |
19 | "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \ | |
20 | label, num, temp, \ | |
21 | (temp & RH_PS_PRSC) ? " PRSC" : "", \ | |
22 | (temp & RH_PS_OCIC) ? " OCIC" : "", \ | |
23 | (temp & RH_PS_PSSC) ? " PSSC" : "", \ | |
24 | (temp & RH_PS_PESC) ? " PESC" : "", \ | |
25 | (temp & RH_PS_CSC) ? " CSC" : "", \ | |
dd9048af | 26 | \ |
1da177e4 LT |
27 | (temp & RH_PS_LSDA) ? " LSDA" : "", \ |
28 | (temp & RH_PS_PPS) ? " PPS" : "", \ | |
29 | (temp & RH_PS_PRS) ? " PRS" : "", \ | |
30 | (temp & RH_PS_POCI) ? " POCI" : "", \ | |
31 | (temp & RH_PS_PSS) ? " PSS" : "", \ | |
dd9048af | 32 | \ |
1da177e4 LT |
33 | (temp & RH_PS_PES) ? " PES" : "", \ |
34 | (temp & RH_PS_CCS) ? " CCS" : "" \ | |
35 | ); | |
36 | ||
37 | /*-------------------------------------------------------------------------*/ | |
38 | ||
1da177e4 LT |
39 | #define OHCI_SCHED_ENABLES \ |
40 | (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE) | |
41 | ||
7d12e780 DH |
42 | static void dl_done_list (struct ohci_hcd *); |
43 | static void finish_unlinks (struct ohci_hcd *, u16); | |
1da177e4 | 44 | |
b1878440 | 45 | #ifdef CONFIG_PM |
8d1a243b AS |
46 | static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop) |
47 | __releases(ohci->lock) | |
48 | __acquires(ohci->lock) | |
1da177e4 | 49 | { |
1da177e4 | 50 | int status = 0; |
8de98402 | 51 | |
1da177e4 LT |
52 | ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); |
53 | switch (ohci->hc_control & OHCI_CTRL_HCFS) { | |
54 | case OHCI_USB_RESUME: | |
55 | ohci_dbg (ohci, "resume/suspend?\n"); | |
56 | ohci->hc_control &= ~OHCI_CTRL_HCFS; | |
57 | ohci->hc_control |= OHCI_USB_RESET; | |
58 | ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); | |
59 | (void) ohci_readl (ohci, &ohci->regs->control); | |
60 | /* FALL THROUGH */ | |
61 | case OHCI_USB_RESET: | |
62 | status = -EBUSY; | |
63 | ohci_dbg (ohci, "needs reinit!\n"); | |
64 | goto done; | |
65 | case OHCI_USB_SUSPEND: | |
8d1a243b AS |
66 | if (!ohci->autostop) { |
67 | ohci_dbg (ohci, "already suspended\n"); | |
68 | goto done; | |
69 | } | |
1da177e4 | 70 | } |
8d1a243b AS |
71 | ohci_dbg (ohci, "%s root hub\n", |
72 | autostop ? "auto-stop" : "suspend"); | |
1da177e4 LT |
73 | |
74 | /* First stop any processing */ | |
8d1a243b | 75 | if (!autostop && (ohci->hc_control & OHCI_SCHED_ENABLES)) { |
1da177e4 LT |
76 | ohci->hc_control &= ~OHCI_SCHED_ENABLES; |
77 | ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); | |
78 | ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); | |
79 | ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus); | |
80 | ||
81 | /* sched disables take effect on the next frame, | |
82 | * then the last WDH could take 6+ msec | |
83 | */ | |
84 | ohci_dbg (ohci, "stopping schedules ...\n"); | |
8d1a243b AS |
85 | ohci->autostop = 0; |
86 | spin_unlock_irq (&ohci->lock); | |
87 | msleep (8); | |
88 | spin_lock_irq (&ohci->lock); | |
1da177e4 | 89 | } |
7d12e780 DH |
90 | dl_done_list (ohci); |
91 | finish_unlinks (ohci, ohci_frame_no(ohci)); | |
1da177e4 | 92 | |
dee03770 AS |
93 | /* |
94 | * Some controllers don't handle "global" suspend properly if | |
95 | * there are unsuspended ports. For these controllers, put all | |
96 | * the enabled ports into suspend before suspending the root hub. | |
97 | */ | |
98 | if (ohci->flags & OHCI_QUIRK_GLOBAL_SUSPEND) { | |
99 | __hc32 __iomem *portstat = ohci->regs->roothub.portstatus; | |
100 | int i; | |
101 | unsigned temp; | |
102 | ||
103 | for (i = 0; i < ohci->num_ports; (++i, ++portstat)) { | |
104 | temp = ohci_readl(ohci, portstat); | |
105 | if ((temp & (RH_PS_PES | RH_PS_PSS)) == | |
106 | RH_PS_PES) | |
107 | ohci_writel(ohci, RH_PS_PSS, portstat); | |
108 | } | |
109 | } | |
110 | ||
1da177e4 | 111 | /* maybe resume can wake root hub */ |
58a97ffe | 112 | if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) { |
1da177e4 | 113 | ohci->hc_control |= OHCI_CTRL_RWE; |
58a97ffe | 114 | } else { |
5f47493c AS |
115 | ohci_writel(ohci, OHCI_INTR_RHSC | OHCI_INTR_RD, |
116 | &ohci->regs->intrdisable); | |
1da177e4 | 117 | ohci->hc_control &= ~OHCI_CTRL_RWE; |
1f7e1a3b | 118 | } |
1da177e4 | 119 | |
f197b2c5 DB |
120 | /* Suspend hub ... this is the "global (to this bus) suspend" mode, |
121 | * which doesn't imply ports will first be individually suspended. | |
122 | */ | |
1da177e4 LT |
123 | ohci->hc_control &= ~OHCI_CTRL_HCFS; |
124 | ohci->hc_control |= OHCI_USB_SUSPEND; | |
125 | ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); | |
126 | (void) ohci_readl (ohci, &ohci->regs->control); | |
127 | ||
128 | /* no resumes until devices finish suspending */ | |
8d1a243b AS |
129 | if (!autostop) { |
130 | ohci->next_statechange = jiffies + msecs_to_jiffies (5); | |
131 | ohci->autostop = 0; | |
b7463c71 | 132 | ohci->rh_state = OHCI_RH_SUSPENDED; |
8d1a243b | 133 | } |
d413984a | 134 | |
1da177e4 | 135 | done: |
1da177e4 LT |
136 | return status; |
137 | } | |
138 | ||
139 | static inline struct ed *find_head (struct ed *ed) | |
140 | { | |
141 | /* for bulk and control lists */ | |
142 | while (ed->ed_prev) | |
143 | ed = ed->ed_prev; | |
144 | return ed; | |
145 | } | |
146 | ||
147 | /* caller has locked the root hub */ | |
8d1a243b AS |
148 | static int ohci_rh_resume (struct ohci_hcd *ohci) |
149 | __releases(ohci->lock) | |
150 | __acquires(ohci->lock) | |
1da177e4 | 151 | { |
8d1a243b | 152 | struct usb_hcd *hcd = ohci_to_hcd (ohci); |
1da177e4 LT |
153 | u32 temp, enables; |
154 | int status = -EINPROGRESS; | |
8d1a243b | 155 | int autostopped = ohci->autostop; |
8de98402 | 156 | |
8d1a243b | 157 | ohci->autostop = 0; |
1da177e4 LT |
158 | ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); |
159 | ||
160 | if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { | |
f197b2c5 | 161 | /* this can happen after resuming a swsusp snapshot */ |
b7463c71 | 162 | if (ohci->rh_state != OHCI_RH_RUNNING) { |
1da177e4 LT |
163 | ohci_dbg (ohci, "BIOS/SMM active, control %03x\n", |
164 | ohci->hc_control); | |
165 | status = -EBUSY; | |
166 | /* this happens when pmcore resumes HC then root */ | |
167 | } else { | |
168 | ohci_dbg (ohci, "duplicate resume\n"); | |
169 | status = 0; | |
170 | } | |
171 | } else switch (ohci->hc_control & OHCI_CTRL_HCFS) { | |
172 | case OHCI_USB_SUSPEND: | |
173 | ohci->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES); | |
174 | ohci->hc_control |= OHCI_USB_RESUME; | |
175 | ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); | |
176 | (void) ohci_readl (ohci, &ohci->regs->control); | |
8d1a243b AS |
177 | ohci_dbg (ohci, "%s root hub\n", |
178 | autostopped ? "auto-start" : "resume"); | |
1da177e4 LT |
179 | break; |
180 | case OHCI_USB_RESUME: | |
181 | /* HCFS changes sometime after INTR_RD */ | |
1b7be3c0 | 182 | ohci_dbg(ohci, "%swakeup root hub\n", |
583ceada | 183 | autostopped ? "auto-" : ""); |
1da177e4 LT |
184 | break; |
185 | case OHCI_USB_OPER: | |
f197b2c5 DB |
186 | /* this can happen after resuming a swsusp snapshot */ |
187 | ohci_dbg (ohci, "snapshot resume? reinit\n"); | |
188 | status = -EBUSY; | |
1da177e4 LT |
189 | break; |
190 | default: /* RESET, we lost power */ | |
f197b2c5 | 191 | ohci_dbg (ohci, "lost power\n"); |
1da177e4 LT |
192 | status = -EBUSY; |
193 | } | |
1da177e4 | 194 | if (status == -EBUSY) { |
8d1a243b | 195 | if (!autostopped) { |
8d1a243b AS |
196 | spin_unlock_irq (&ohci->lock); |
197 | (void) ohci_init (ohci); | |
198 | status = ohci_restart (ohci); | |
d576bb9f MH |
199 | |
200 | usb_root_hub_lost_power(hcd->self.root_hub); | |
201 | ||
8d1a243b AS |
202 | spin_lock_irq (&ohci->lock); |
203 | } | |
204 | return status; | |
1da177e4 LT |
205 | } |
206 | if (status != -EINPROGRESS) | |
207 | return status; | |
8d1a243b AS |
208 | if (autostopped) |
209 | goto skip_resume; | |
210 | spin_unlock_irq (&ohci->lock); | |
1da177e4 | 211 | |
1da177e4 | 212 | /* Some controllers (lucent erratum) need extra-long delays */ |
f197b2c5 | 213 | msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1); |
1da177e4 LT |
214 | |
215 | temp = ohci_readl (ohci, &ohci->regs->control); | |
216 | temp &= OHCI_CTRL_HCFS; | |
217 | if (temp != OHCI_USB_RESUME) { | |
218 | ohci_err (ohci, "controller won't resume\n"); | |
565402ba | 219 | spin_lock_irq(&ohci->lock); |
1da177e4 LT |
220 | return -EBUSY; |
221 | } | |
222 | ||
223 | /* disable old schedule state, reinit from scratch */ | |
224 | ohci_writel (ohci, 0, &ohci->regs->ed_controlhead); | |
225 | ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent); | |
226 | ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead); | |
227 | ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent); | |
228 | ohci_writel (ohci, 0, &ohci->regs->ed_periodcurrent); | |
229 | ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca); | |
230 | ||
231 | /* Sometimes PCI D3 suspend trashes frame timings ... */ | |
232 | periodic_reinit (ohci); | |
233 | ||
8d1a243b AS |
234 | /* the following code is executed with ohci->lock held and |
235 | * irqs disabled if and only if autostopped is true | |
236 | */ | |
237 | ||
238 | skip_resume: | |
1da177e4 LT |
239 | /* interrupts might have been disabled */ |
240 | ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable); | |
241 | if (ohci->ed_rm_list) | |
242 | ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable); | |
1da177e4 LT |
243 | |
244 | /* Then re-enable operations */ | |
245 | ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control); | |
246 | (void) ohci_readl (ohci, &ohci->regs->control); | |
8d1a243b AS |
247 | if (!autostopped) |
248 | msleep (3); | |
1da177e4 | 249 | |
6a9062f3 DB |
250 | temp = ohci->hc_control; |
251 | temp &= OHCI_CTRL_RWC; | |
252 | temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER; | |
1da177e4 LT |
253 | ohci->hc_control = temp; |
254 | ohci_writel (ohci, temp, &ohci->regs->control); | |
255 | (void) ohci_readl (ohci, &ohci->regs->control); | |
256 | ||
257 | /* TRSMRCY */ | |
8d1a243b AS |
258 | if (!autostopped) { |
259 | msleep (10); | |
260 | spin_lock_irq (&ohci->lock); | |
261 | } | |
262 | /* now ohci->lock is always held and irqs are always disabled */ | |
1da177e4 | 263 | |
d413984a DB |
264 | /* keep it alive for more than ~5x suspend + resume costs */ |
265 | ohci->next_statechange = jiffies + STATECHANGE_DELAY; | |
1da177e4 LT |
266 | |
267 | /* maybe turn schedules back on */ | |
268 | enables = 0; | |
269 | temp = 0; | |
270 | if (!ohci->ed_rm_list) { | |
271 | if (ohci->ed_controltail) { | |
272 | ohci_writel (ohci, | |
273 | find_head (ohci->ed_controltail)->dma, | |
274 | &ohci->regs->ed_controlhead); | |
275 | enables |= OHCI_CTRL_CLE; | |
276 | temp |= OHCI_CLF; | |
277 | } | |
278 | if (ohci->ed_bulktail) { | |
279 | ohci_writel (ohci, find_head (ohci->ed_bulktail)->dma, | |
280 | &ohci->regs->ed_bulkhead); | |
281 | enables |= OHCI_CTRL_BLE; | |
282 | temp |= OHCI_BLF; | |
283 | } | |
284 | } | |
285 | if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs) | |
286 | enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE; | |
287 | if (enables) { | |
288 | ohci_dbg (ohci, "restarting schedules ... %08x\n", enables); | |
289 | ohci->hc_control |= enables; | |
290 | ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); | |
291 | if (temp) | |
292 | ohci_writel (ohci, temp, &ohci->regs->cmdstatus); | |
293 | (void) ohci_readl (ohci, &ohci->regs->control); | |
294 | } | |
295 | ||
b7463c71 | 296 | ohci->rh_state = OHCI_RH_RUNNING; |
1da177e4 LT |
297 | return 0; |
298 | } | |
299 | ||
8d1a243b AS |
300 | static int ohci_bus_suspend (struct usb_hcd *hcd) |
301 | { | |
302 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
303 | int rc; | |
304 | ||
305 | spin_lock_irq (&ohci->lock); | |
306 | ||
541c7d43 | 307 | if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) |
8d1a243b AS |
308 | rc = -ESHUTDOWN; |
309 | else | |
310 | rc = ohci_rh_suspend (ohci, 0); | |
311 | spin_unlock_irq (&ohci->lock); | |
312 | return rc; | |
313 | } | |
314 | ||
315 | static int ohci_bus_resume (struct usb_hcd *hcd) | |
316 | { | |
317 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
318 | int rc; | |
319 | ||
320 | if (time_before (jiffies, ohci->next_statechange)) | |
321 | msleep(5); | |
322 | ||
323 | spin_lock_irq (&ohci->lock); | |
324 | ||
541c7d43 | 325 | if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) |
8d1a243b AS |
326 | rc = -ESHUTDOWN; |
327 | else | |
328 | rc = ohci_rh_resume (ohci); | |
329 | spin_unlock_irq (&ohci->lock); | |
330 | ||
331 | /* poll until we know a device is connected or we autostop */ | |
332 | if (rc == 0) | |
333 | usb_hcd_poll_rh_status(hcd); | |
334 | return rc; | |
335 | } | |
336 | ||
1f9fc882 AS |
337 | /* Carry out polling-, autostop-, and autoresume-related state changes */ |
338 | static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, | |
71b7497c | 339 | int any_connected, int rhsc_status) |
1f9fc882 AS |
340 | { |
341 | int poll_rh = 1; | |
71b7497c | 342 | int rhsc_enable; |
1f9fc882 | 343 | |
ee0b9be8 | 344 | /* Some broken controllers never turn off RHSC in the interrupt |
4a511bc3 AS |
345 | * status register. For their sake we won't re-enable RHSC |
346 | * interrupts if the interrupt bit is already active. | |
347 | */ | |
4a511bc3 AS |
348 | rhsc_enable = ohci_readl(ohci, &ohci->regs->intrenable) & |
349 | OHCI_INTR_RHSC; | |
1f9fc882 | 350 | |
4a511bc3 | 351 | switch (ohci->hc_control & OHCI_CTRL_HCFS) { |
1f9fc882 | 352 | case OHCI_USB_OPER: |
4a511bc3 AS |
353 | /* If no status changes are pending, enable RHSC interrupts. */ |
354 | if (!rhsc_enable && !rhsc_status && !changed) { | |
355 | rhsc_enable = OHCI_INTR_RHSC; | |
356 | ohci_writel(ohci, rhsc_enable, &ohci->regs->intrenable); | |
b5fb454f AS |
357 | } |
358 | ||
359 | /* Keep on polling until we know a device is connected | |
360 | * and RHSC is enabled, or until we autostop. | |
361 | */ | |
1f9fc882 AS |
362 | if (!ohci->autostop) { |
363 | if (any_connected || | |
364 | !device_may_wakeup(&ohci_to_hcd(ohci) | |
365 | ->self.root_hub->dev)) { | |
4a511bc3 | 366 | if (rhsc_enable) |
1f9fc882 AS |
367 | poll_rh = 0; |
368 | } else { | |
369 | ohci->autostop = 1; | |
370 | ohci->next_statechange = jiffies + HZ; | |
371 | } | |
372 | ||
373 | /* if no devices have been attached for one second, autostop */ | |
374 | } else { | |
375 | if (changed || any_connected) { | |
376 | ohci->autostop = 0; | |
377 | ohci->next_statechange = jiffies + | |
378 | STATECHANGE_DELAY; | |
4a511bc3 | 379 | } else if (time_after_eq(jiffies, |
1f9fc882 AS |
380 | ohci->next_statechange) |
381 | && !ohci->ed_rm_list | |
382 | && !(ohci->hc_control & | |
383 | OHCI_SCHED_ENABLES)) { | |
384 | ohci_rh_suspend(ohci, 1); | |
4a511bc3 AS |
385 | if (rhsc_enable) |
386 | poll_rh = 0; | |
1f9fc882 AS |
387 | } |
388 | } | |
389 | break; | |
390 | ||
1f9fc882 AS |
391 | case OHCI_USB_SUSPEND: |
392 | case OHCI_USB_RESUME: | |
4a511bc3 | 393 | /* if there is a port change, autostart or ask to be resumed */ |
1f9fc882 AS |
394 | if (changed) { |
395 | if (ohci->autostop) | |
396 | ohci_rh_resume(ohci); | |
397 | else | |
398 | usb_hcd_resume_root_hub(ohci_to_hcd(ohci)); | |
71b7497c AS |
399 | |
400 | /* If remote wakeup is disabled, stop polling */ | |
401 | } else if (!ohci->autostop && | |
402 | !ohci_to_hcd(ohci)->self.root_hub-> | |
403 | do_remote_wakeup) { | |
404 | poll_rh = 0; | |
405 | ||
1f9fc882 | 406 | } else { |
71b7497c AS |
407 | /* If no status changes are pending, |
408 | * enable RHSC interrupts | |
409 | */ | |
410 | if (!rhsc_enable && !rhsc_status) { | |
4a511bc3 AS |
411 | rhsc_enable = OHCI_INTR_RHSC; |
412 | ohci_writel(ohci, rhsc_enable, | |
b5fb454f | 413 | &ohci->regs->intrenable); |
4a511bc3 | 414 | } |
71b7497c | 415 | /* Keep polling until RHSC is enabled */ |
4a511bc3 AS |
416 | if (rhsc_enable) |
417 | poll_rh = 0; | |
1f9fc882 AS |
418 | } |
419 | break; | |
420 | } | |
421 | return poll_rh; | |
422 | } | |
423 | ||
424 | #else /* CONFIG_PM */ | |
425 | ||
426 | static inline int ohci_rh_resume(struct ohci_hcd *ohci) | |
427 | { | |
428 | return 0; | |
429 | } | |
430 | ||
431 | /* Carry out polling-related state changes. | |
432 | * autostop isn't used when CONFIG_PM is turned off. | |
433 | */ | |
434 | static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, | |
71b7497c | 435 | int any_connected, int rhsc_status) |
1f9fc882 | 436 | { |
b5fb454f | 437 | /* If RHSC is enabled, don't poll */ |
09ca8adb | 438 | if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC) |
b5fb454f AS |
439 | return 0; |
440 | ||
71b7497c AS |
441 | /* If status changes are pending, continue polling. |
442 | * Conversely, if no status changes are pending but the RHSC | |
443 | * status bit was set, then RHSC may be broken so continue polling. | |
444 | */ | |
445 | if (changed || rhsc_status) | |
446 | return 1; | |
447 | ||
448 | /* It's safe to re-enable RHSC interrupts */ | |
449 | ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable); | |
450 | return 0; | |
1f9fc882 AS |
451 | } |
452 | ||
8ad7fe16 | 453 | #endif /* CONFIG_PM */ |
1da177e4 LT |
454 | |
455 | /*-------------------------------------------------------------------------*/ | |
456 | ||
457 | /* build "status change" packet (one or two bytes) from HC registers */ | |
458 | ||
459 | static int | |
460 | ohci_hub_status_data (struct usb_hcd *hcd, char *buf) | |
461 | { | |
462 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
fdd13b36 | 463 | int i, changed = 0, length = 1; |
052ac01a | 464 | int any_connected = 0; |
71b7497c | 465 | int rhsc_status; |
1da177e4 LT |
466 | unsigned long flags; |
467 | ||
468 | spin_lock_irqsave (&ohci->lock, flags); | |
541c7d43 | 469 | if (!HCD_HW_ACCESSIBLE(hcd)) |
6fd75b19 | 470 | goto done; |
1da177e4 | 471 | |
fdd13b36 DB |
472 | /* undocumented erratum seen on at least rev D */ |
473 | if ((ohci->flags & OHCI_QUIRK_AMD756) | |
474 | && (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) { | |
475 | ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n", | |
1da177e4 LT |
476 | ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP); |
477 | /* retry later; "should not happen" */ | |
478 | goto done; | |
479 | } | |
480 | ||
481 | /* init status */ | |
482 | if (roothub_status (ohci) & (RH_HS_LPSC | RH_HS_OCIC)) | |
483 | buf [0] = changed = 1; | |
484 | else | |
485 | buf [0] = 0; | |
fdd13b36 | 486 | if (ohci->num_ports > 7) { |
1da177e4 LT |
487 | buf [1] = 0; |
488 | length++; | |
489 | } | |
490 | ||
71b7497c AS |
491 | /* Clear the RHSC status flag before reading the port statuses */ |
492 | ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrstatus); | |
493 | rhsc_status = ohci_readl(ohci, &ohci->regs->intrstatus) & | |
494 | OHCI_INTR_RHSC; | |
495 | ||
1da177e4 | 496 | /* look at each port */ |
fdd13b36 | 497 | for (i = 0; i < ohci->num_ports; i++) { |
1da177e4 LT |
498 | u32 status = roothub_portstatus (ohci, i); |
499 | ||
8d1a243b AS |
500 | /* can't autostop if ports are connected */ |
501 | any_connected |= (status & RH_PS_CCS); | |
502 | ||
1da177e4 LT |
503 | if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC |
504 | | RH_PS_OCIC | RH_PS_PRSC)) { | |
505 | changed = 1; | |
506 | if (i < 7) | |
507 | buf [0] |= 1 << (i + 1); | |
508 | else | |
509 | buf [1] |= 1 << (i - 7); | |
1da177e4 | 510 | } |
d413984a | 511 | } |
1da177e4 | 512 | |
541c7d43 AS |
513 | if (ohci_root_hub_state_changes(ohci, changed, |
514 | any_connected, rhsc_status)) | |
515 | set_bit(HCD_FLAG_POLL_RH, &hcd->flags); | |
516 | else | |
517 | clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); | |
518 | ||
d413984a | 519 | |
1da177e4 LT |
520 | done: |
521 | spin_unlock_irqrestore (&ohci->lock, flags); | |
522 | ||
1da177e4 LT |
523 | return changed ? length : 0; |
524 | } | |
525 | ||
526 | /*-------------------------------------------------------------------------*/ | |
527 | ||
528 | static void | |
529 | ohci_hub_descriptor ( | |
530 | struct ohci_hcd *ohci, | |
531 | struct usb_hub_descriptor *desc | |
532 | ) { | |
533 | u32 rh = roothub_a (ohci); | |
1da177e4 LT |
534 | u16 temp; |
535 | ||
536 | desc->bDescriptorType = 0x29; | |
537 | desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24; | |
538 | desc->bHubContrCurrent = 0; | |
539 | ||
fdd13b36 DB |
540 | desc->bNbrPorts = ohci->num_ports; |
541 | temp = 1 + (ohci->num_ports / 8); | |
1da177e4 LT |
542 | desc->bDescLength = 7 + 2 * temp; |
543 | ||
544 | temp = 0; | |
545 | if (rh & RH_A_NPS) /* no power switching? */ | |
546 | temp |= 0x0002; | |
dd9048af | 547 | if (rh & RH_A_PSM) /* per-port power switching? */ |
1da177e4 LT |
548 | temp |= 0x0001; |
549 | if (rh & RH_A_NOCP) /* no overcurrent reporting? */ | |
550 | temp |= 0x0010; | |
551 | else if (rh & RH_A_OCPM) /* per-port overcurrent reporting? */ | |
552 | temp |= 0x0008; | |
553 | desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp); | |
554 | ||
da13051c | 555 | /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ |
1da177e4 | 556 | rh = roothub_b (ohci); |
dbe79bbe JY |
557 | memset(desc->u.hs.DeviceRemovable, 0xff, |
558 | sizeof(desc->u.hs.DeviceRemovable)); | |
559 | desc->u.hs.DeviceRemovable[0] = rh & RH_B_DR; | |
fdd13b36 | 560 | if (ohci->num_ports > 7) { |
dbe79bbe JY |
561 | desc->u.hs.DeviceRemovable[1] = (rh & RH_B_DR) >> 8; |
562 | desc->u.hs.DeviceRemovable[2] = 0xff; | |
1da177e4 | 563 | } else |
dbe79bbe | 564 | desc->u.hs.DeviceRemovable[1] = 0xff; |
1da177e4 LT |
565 | } |
566 | ||
567 | /*-------------------------------------------------------------------------*/ | |
568 | ||
569 | #ifdef CONFIG_USB_OTG | |
570 | ||
571 | static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port) | |
572 | { | |
573 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
574 | u32 status; | |
575 | ||
576 | if (!port) | |
577 | return -EINVAL; | |
578 | port--; | |
579 | ||
580 | /* start port reset before HNP protocol times out */ | |
581 | status = ohci_readl(ohci, &ohci->regs->roothub.portstatus [port]); | |
582 | if (!(status & RH_PS_CCS)) | |
583 | return -ENODEV; | |
584 | ||
585 | /* khubd will finish the reset later */ | |
586 | ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]); | |
587 | return 0; | |
588 | } | |
589 | ||
1da177e4 LT |
590 | #else |
591 | ||
592 | #define ohci_start_port_reset NULL | |
593 | ||
594 | #endif | |
595 | ||
596 | /*-------------------------------------------------------------------------*/ | |
597 | ||
598 | ||
599 | /* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling, | |
600 | * not necessarily continuous ... to guard against resume signaling. | |
1da177e4 | 601 | */ |
1da177e4 | 602 | #define PORT_RESET_MSEC 50 |
1da177e4 LT |
603 | |
604 | /* this timer value might be vendor-specific ... */ | |
605 | #define PORT_RESET_HW_MSEC 10 | |
606 | ||
607 | /* wrap-aware logic morphed from <linux/jiffies.h> */ | |
608 | #define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0) | |
609 | ||
610 | /* called from some task, normally khubd */ | |
23d10a9e | 611 | static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port) |
1da177e4 LT |
612 | { |
613 | __hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port]; | |
1b7b61c5 | 614 | u32 temp = 0; |
1da177e4 LT |
615 | u16 now = ohci_readl(ohci, &ohci->regs->fmnumber); |
616 | u16 reset_done = now + PORT_RESET_MSEC; | |
e01e7fe3 | 617 | int limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC); |
1da177e4 LT |
618 | |
619 | /* build a "continuous enough" reset signal, with up to | |
620 | * 3msec gap between pulses. scheduler HZ==100 must work; | |
621 | * this might need to be deadline-scheduled. | |
622 | */ | |
623 | do { | |
e01e7fe3 DB |
624 | int limit_2; |
625 | ||
1da177e4 | 626 | /* spin until any current reset finishes */ |
e01e7fe3 DB |
627 | limit_2 = PORT_RESET_HW_MSEC * 2; |
628 | while (--limit_2 >= 0) { | |
1da177e4 | 629 | temp = ohci_readl (ohci, portstat); |
23d10a9e TO |
630 | /* handle e.g. CardBus eject */ |
631 | if (temp == ~(u32)0) | |
632 | return -ESHUTDOWN; | |
1da177e4 LT |
633 | if (!(temp & RH_PS_PRS)) |
634 | break; | |
635 | udelay (500); | |
dd9048af | 636 | } |
1da177e4 | 637 | |
e01e7fe3 DB |
638 | /* timeout (a hardware error) has been observed when |
639 | * EHCI sets CF while this driver is resetting a port; | |
640 | * presumably other disconnect paths might do it too. | |
641 | */ | |
642 | if (limit_2 < 0) { | |
643 | ohci_dbg(ohci, | |
644 | "port[%d] reset timeout, stat %08x\n", | |
645 | port, temp); | |
646 | break; | |
647 | } | |
648 | ||
1da177e4 LT |
649 | if (!(temp & RH_PS_CCS)) |
650 | break; | |
651 | if (temp & RH_PS_PRSC) | |
652 | ohci_writel (ohci, RH_PS_PRSC, portstat); | |
653 | ||
654 | /* start the next reset, sleep till it's probably done */ | |
655 | ohci_writel (ohci, RH_PS_PRS, portstat); | |
656 | msleep(PORT_RESET_HW_MSEC); | |
657 | now = ohci_readl(ohci, &ohci->regs->fmnumber); | |
e01e7fe3 DB |
658 | } while (tick_before(now, reset_done) && --limit_1 >= 0); |
659 | ||
660 | /* caller synchronizes using PRSC ... and handles PRS | |
661 | * still being set when this returns. | |
662 | */ | |
23d10a9e TO |
663 | |
664 | return 0; | |
1da177e4 LT |
665 | } |
666 | ||
667 | static int ohci_hub_control ( | |
668 | struct usb_hcd *hcd, | |
669 | u16 typeReq, | |
670 | u16 wValue, | |
671 | u16 wIndex, | |
672 | char *buf, | |
673 | u16 wLength | |
674 | ) { | |
675 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
fcf7d214 | 676 | int ports = ohci->num_ports; |
1da177e4 LT |
677 | u32 temp; |
678 | int retval = 0; | |
679 | ||
541c7d43 | 680 | if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) |
8de98402 BH |
681 | return -ESHUTDOWN; |
682 | ||
1da177e4 LT |
683 | switch (typeReq) { |
684 | case ClearHubFeature: | |
685 | switch (wValue) { | |
686 | case C_HUB_OVER_CURRENT: | |
687 | ohci_writel (ohci, RH_HS_OCIC, | |
688 | &ohci->regs->roothub.status); | |
689 | case C_HUB_LOCAL_POWER: | |
690 | break; | |
691 | default: | |
692 | goto error; | |
693 | } | |
694 | break; | |
695 | case ClearPortFeature: | |
696 | if (!wIndex || wIndex > ports) | |
697 | goto error; | |
698 | wIndex--; | |
699 | ||
700 | switch (wValue) { | |
701 | case USB_PORT_FEAT_ENABLE: | |
702 | temp = RH_PS_CCS; | |
703 | break; | |
704 | case USB_PORT_FEAT_C_ENABLE: | |
705 | temp = RH_PS_PESC; | |
706 | break; | |
707 | case USB_PORT_FEAT_SUSPEND: | |
708 | temp = RH_PS_POCI; | |
1da177e4 LT |
709 | break; |
710 | case USB_PORT_FEAT_C_SUSPEND: | |
711 | temp = RH_PS_PSSC; | |
712 | break; | |
713 | case USB_PORT_FEAT_POWER: | |
714 | temp = RH_PS_LSDA; | |
715 | break; | |
716 | case USB_PORT_FEAT_C_CONNECTION: | |
717 | temp = RH_PS_CSC; | |
718 | break; | |
719 | case USB_PORT_FEAT_C_OVER_CURRENT: | |
720 | temp = RH_PS_OCIC; | |
721 | break; | |
722 | case USB_PORT_FEAT_C_RESET: | |
723 | temp = RH_PS_PRSC; | |
724 | break; | |
725 | default: | |
726 | goto error; | |
727 | } | |
728 | ohci_writel (ohci, temp, | |
729 | &ohci->regs->roothub.portstatus [wIndex]); | |
730 | // ohci_readl (ohci, &ohci->regs->roothub.portstatus [wIndex]); | |
731 | break; | |
732 | case GetHubDescriptor: | |
733 | ohci_hub_descriptor (ohci, (struct usb_hub_descriptor *) buf); | |
734 | break; | |
735 | case GetHubStatus: | |
736 | temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE); | |
a5abdeaf | 737 | put_unaligned_le32(temp, buf); |
1da177e4 LT |
738 | break; |
739 | case GetPortStatus: | |
740 | if (!wIndex || wIndex > ports) | |
741 | goto error; | |
742 | wIndex--; | |
743 | temp = roothub_portstatus (ohci, wIndex); | |
a5abdeaf | 744 | put_unaligned_le32(temp, buf); |
1da177e4 LT |
745 | |
746 | #ifndef OHCI_VERBOSE_DEBUG | |
747 | if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ | |
748 | #endif | |
749 | dbg_port (ohci, "GetStatus", wIndex, temp); | |
750 | break; | |
751 | case SetHubFeature: | |
752 | switch (wValue) { | |
753 | case C_HUB_OVER_CURRENT: | |
754 | // FIXME: this can be cleared, yes? | |
755 | case C_HUB_LOCAL_POWER: | |
756 | break; | |
757 | default: | |
758 | goto error; | |
759 | } | |
760 | break; | |
761 | case SetPortFeature: | |
762 | if (!wIndex || wIndex > ports) | |
763 | goto error; | |
764 | wIndex--; | |
765 | switch (wValue) { | |
766 | case USB_PORT_FEAT_SUSPEND: | |
767 | #ifdef CONFIG_USB_OTG | |
768 | if (hcd->self.otg_port == (wIndex + 1) | |
769 | && hcd->self.b_hnp_enable) | |
e8b24450 | 770 | ohci->start_hnp(ohci); |
1da177e4 LT |
771 | else |
772 | #endif | |
773 | ohci_writel (ohci, RH_PS_PSS, | |
774 | &ohci->regs->roothub.portstatus [wIndex]); | |
775 | break; | |
776 | case USB_PORT_FEAT_POWER: | |
777 | ohci_writel (ohci, RH_PS_PPS, | |
778 | &ohci->regs->roothub.portstatus [wIndex]); | |
779 | break; | |
780 | case USB_PORT_FEAT_RESET: | |
23d10a9e | 781 | retval = root_port_reset (ohci, wIndex); |
1da177e4 LT |
782 | break; |
783 | default: | |
784 | goto error; | |
785 | } | |
786 | break; | |
787 | ||
788 | default: | |
789 | error: | |
790 | /* "protocol stall" on error */ | |
791 | retval = -EPIPE; | |
792 | } | |
793 | return retval; | |
794 | } | |
795 |