Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # USB Gadget support on a system involves | |
3 | # (a) a peripheral controller, and | |
4 | # (b) the gadget driver using it. | |
5 | # | |
6 | # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! | |
7 | # | |
8 | # - Host systems (like PCs) need CONFIG_USB (with "A" jacks). | |
9 | # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). | |
cab00891 | 10 | # - Some systems have both kinds of controllers. |
1da177e4 LT |
11 | # |
12 | # With help from a special transceiver and a "Mini-AB" jack, systems with | |
13 | # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). | |
14 | # | |
1da177e4 | 15 | |
b75be4ab DC |
16 | menuconfig USB_GADGET |
17 | tristate "USB Gadget Support" | |
1da177e4 LT |
18 | help |
19 | USB is a master/slave protocol, organized with one master | |
20 | host (such as a PC) controlling up to 127 peripheral devices. | |
21 | The USB hardware is asymmetric, which makes it easier to set up: | |
22 | you can't connect a "to-the-host" connector to a peripheral. | |
23 | ||
24 | Linux can run in the host, or in the peripheral. In both cases | |
25 | you need a low level bus controller driver, and some software | |
26 | talking to it. Peripheral controllers are often discrete silicon, | |
27 | or are integrated with the CPU in a microcontroller. The more | |
e113f29c | 28 | familiar host side controllers have names like "EHCI", "OHCI", |
1da177e4 LT |
29 | or "UHCI", and are usually integrated into southbridges on PC |
30 | motherboards. | |
31 | ||
32 | Enable this configuration option if you want to run Linux inside | |
33 | a USB peripheral device. Configure one hardware driver for your | |
34 | peripheral/device side bus controller, and a "gadget driver" for | |
35 | your peripheral protocol. (If you use modular gadget drivers, | |
36 | you may configure more than one.) | |
37 | ||
38 | If in doubt, say "N" and don't enable these drivers; most people | |
39 | don't have this kind of hardware (except maybe inside Linux PDAs). | |
40 | ||
41 | For more information, see <http://www.linux-usb.org/gadget> and | |
42 | the kernel DocBook documentation for this API. | |
43 | ||
b75be4ab DC |
44 | if USB_GADGET |
45 | ||
70790f63 | 46 | config USB_GADGET_DEBUG |
afd0e0f2 | 47 | boolean "Debugging messages (DEVELOPMENT)" |
36e893d2 | 48 | depends on DEBUG_KERNEL |
70790f63 DB |
49 | help |
50 | Many controller and gadget drivers will print some debugging | |
51 | messages if you use this option to ask for those messages. | |
52 | ||
53 | Avoid enabling these messages, even if you're actively | |
54 | debugging such a driver. Many drivers will emit so many | |
55 | messages that the driver timings are affected, which will | |
56 | either create new failure modes or remove the one you're | |
57 | trying to track down. Never enable these messages for a | |
58 | production build. | |
59 | ||
1da177e4 | 60 | config USB_GADGET_DEBUG_FILES |
afd0e0f2 | 61 | boolean "Debugging information files (DEVELOPMENT)" |
36e893d2 | 62 | depends on PROC_FS |
1da177e4 LT |
63 | help |
64 | Some of the drivers in the "gadget" framework can expose | |
65 | debugging information in files such as /proc/driver/udc | |
66 | (for a peripheral controller). The information in these | |
67 | files may help when you're troubleshooting or bringing up a | |
68 | driver on a new board. Enable these files by choosing "Y" | |
69 | here. If in doubt, or to conserve kernel memory, say "N". | |
70 | ||
914a3f3b | 71 | config USB_GADGET_DEBUG_FS |
afd0e0f2 | 72 | boolean "Debugging information files in debugfs (DEVELOPMENT)" |
36e893d2 | 73 | depends on DEBUG_FS |
914a3f3b HS |
74 | help |
75 | Some of the drivers in the "gadget" framework can expose | |
76 | debugging information in files under /sys/kernel/debug/. | |
77 | The information in these files may help when you're | |
78 | troubleshooting or bringing up a driver on a new board. | |
79 | Enable these files by choosing "Y" here. If in doubt, or | |
80 | to conserve kernel memory, say "N". | |
81 | ||
36e893d2 DB |
82 | config USB_GADGET_VBUS_DRAW |
83 | int "Maximum VBUS Power usage (2-500 mA)" | |
84 | range 2 500 | |
85 | default 2 | |
86 | help | |
87 | Some devices need to draw power from USB when they are | |
88 | configured, perhaps to operate circuitry or to recharge | |
89 | batteries. This is in addition to any local power supply, | |
90 | such as an AC adapter or batteries. | |
91 | ||
92 | Enter the maximum power your device draws through USB, in | |
93 | milliAmperes. The permitted range of values is 2 - 500 mA; | |
94 | 0 mA would be legal, but can make some hosts misbehave. | |
95 | ||
96 | This value will be used except for system-specific gadget | |
97 | drivers that have more specific information. | |
98 | ||
028b271b DB |
99 | config USB_GADGET_SELECTED |
100 | boolean | |
101 | ||
1da177e4 LT |
102 | # |
103 | # USB Peripheral Controller Support | |
104 | # | |
a7a19fac DB |
105 | # The order here is alphabetical, except that integrated controllers go |
106 | # before discrete ones so they will be the initial/default value: | |
107 | # - integrated/SOC controllers first | |
108 | # - licensed IP used in both SOC and discrete versions | |
109 | # - discrete ones (including all PCI-only controllers) | |
110 | # - debug/dummy gadget+hcd is last. | |
111 | # | |
1da177e4 LT |
112 | choice |
113 | prompt "USB Peripheral Controller" | |
114 | depends on USB_GADGET | |
115 | help | |
116 | A USB device uses a controller to talk to its host. | |
117 | Systems should have only one such upstream link. | |
118 | Many controller drivers are platform-specific; these | |
119 | often need board-specific hooks. | |
120 | ||
a7a19fac DB |
121 | # |
122 | # Integrated controllers | |
123 | # | |
124 | ||
125 | config USB_GADGET_AT91 | |
126 | boolean "Atmel AT91 USB Device Port" | |
aa781af0 | 127 | depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45 |
a7a19fac | 128 | select USB_GADGET_SELECTED |
55d402d8 | 129 | help |
a7a19fac DB |
130 | Many Atmel AT91 processors (such as the AT91RM2000) have a |
131 | full speed USB Device Port with support for five configurable | |
132 | endpoints (plus endpoint zero). | |
55d402d8 TD |
133 | |
134 | Say "y" to link the driver statically, or "m" to build a | |
a7a19fac | 135 | dynamically linked module called "at91_udc" and force all |
55d402d8 TD |
136 | gadget drivers to also be dynamically linked. |
137 | ||
a7a19fac | 138 | config USB_AT91 |
55d402d8 | 139 | tristate |
a7a19fac | 140 | depends on USB_GADGET_AT91 |
55d402d8 | 141 | default USB_GADGET |
55d402d8 | 142 | |
914a3f3b HS |
143 | config USB_GADGET_ATMEL_USBA |
144 | boolean "Atmel USBA" | |
145 | select USB_GADGET_DUALSPEED | |
aa781af0 | 146 | depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 |
914a3f3b HS |
147 | help |
148 | USBA is the integrated high-speed USB Device controller on | |
ba45ca43 | 149 | the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. |
914a3f3b HS |
150 | |
151 | config USB_ATMEL_USBA | |
152 | tristate | |
153 | depends on USB_GADGET_ATMEL_USBA | |
154 | default USB_GADGET | |
155 | select USB_GADGET_SELECTED | |
156 | ||
b504882d LY |
157 | config USB_GADGET_FSL_USB2 |
158 | boolean "Freescale Highspeed USB DR Peripheral Controller" | |
54e4026b | 159 | depends on FSL_SOC || ARCH_MXC |
b504882d LY |
160 | select USB_GADGET_DUALSPEED |
161 | help | |
162 | Some of Freescale PowerPC processors have a High Speed | |
163 | Dual-Role(DR) USB controller, which supports device mode. | |
164 | ||
165 | The number of programmable endpoints is different through | |
166 | SOC revisions. | |
167 | ||
168 | Say "y" to link the driver statically, or "m" to build a | |
169 | dynamically linked module called "fsl_usb2_udc" and force | |
170 | all gadget drivers to also be dynamically linked. | |
171 | ||
172 | config USB_FSL_USB2 | |
173 | tristate | |
174 | depends on USB_GADGET_FSL_USB2 | |
175 | default USB_GADGET | |
176 | select USB_GADGET_SELECTED | |
177 | ||
a7a19fac DB |
178 | config USB_GADGET_LH7A40X |
179 | boolean "LH7A40X" | |
180 | depends on ARCH_LH7A40X | |
1da177e4 | 181 | help |
a7a19fac DB |
182 | This driver provides USB Device Controller driver for LH7A40x |
183 | ||
184 | config USB_LH7A40X | |
185 | tristate | |
186 | depends on USB_GADGET_LH7A40X | |
187 | default USB_GADGET | |
188 | select USB_GADGET_SELECTED | |
189 | ||
190 | config USB_GADGET_OMAP | |
191 | boolean "OMAP USB Device Controller" | |
192 | depends on ARCH_OMAP | |
f1c9e151 | 193 | select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG |
54b9ed35 | 194 | select USB_OTG_UTILS if ARCH_OMAP |
a7a19fac DB |
195 | help |
196 | Many Texas Instruments OMAP processors have flexible full | |
197 | speed USB device controllers, with support for up to 30 | |
198 | endpoints (plus endpoint zero). This driver supports the | |
199 | controller in the OMAP 1611, and should work with controllers | |
200 | in other OMAP processors too, given minor tweaks. | |
1da177e4 LT |
201 | |
202 | Say "y" to link the driver statically, or "m" to build a | |
a7a19fac | 203 | dynamically linked module called "omap_udc" and force all |
1da177e4 LT |
204 | gadget drivers to also be dynamically linked. |
205 | ||
a7a19fac | 206 | config USB_OMAP |
1da177e4 | 207 | tristate |
a7a19fac | 208 | depends on USB_GADGET_OMAP |
1da177e4 | 209 | default USB_GADGET |
028b271b | 210 | select USB_GADGET_SELECTED |
1da177e4 | 211 | |
a7a19fac DB |
212 | config USB_OTG |
213 | boolean "OTG Support" | |
214 | depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD | |
215 | help | |
216 | The most notable feature of USB OTG is support for a | |
217 | "Dual-Role" device, which can act as either a device | |
218 | or a host. The initial role choice can be changed | |
219 | later, when two dual-role devices talk to each other. | |
220 | ||
221 | Select this only if your OMAP board has a Mini-AB connector. | |
222 | ||
7a857620 | 223 | config USB_GADGET_PXA25X |
1da177e4 LT |
224 | boolean "PXA 25x or IXP 4xx" |
225 | depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX | |
09963911 | 226 | select USB_OTG_UTILS |
1da177e4 LT |
227 | help |
228 | Intel's PXA 25x series XScale ARM-5TE processors include | |
229 | an integrated full speed USB 1.1 device controller. The | |
230 | controller in the IXP 4xx series is register-compatible. | |
231 | ||
232 | It has fifteen fixed-function endpoints, as well as endpoint | |
233 | zero (for control transfers). | |
234 | ||
235 | Say "y" to link the driver statically, or "m" to build a | |
7a857620 | 236 | dynamically linked module called "pxa25x_udc" and force all |
1da177e4 LT |
237 | gadget drivers to also be dynamically linked. |
238 | ||
7a857620 | 239 | config USB_PXA25X |
1da177e4 | 240 | tristate |
7a857620 | 241 | depends on USB_GADGET_PXA25X |
1da177e4 | 242 | default USB_GADGET |
028b271b | 243 | select USB_GADGET_SELECTED |
1da177e4 LT |
244 | |
245 | # if there's only one gadget driver, using only two bulk endpoints, | |
246 | # don't waste memory for the other endpoints | |
7a857620 PZ |
247 | config USB_PXA25X_SMALL |
248 | depends on USB_GADGET_PXA25X | |
1da177e4 LT |
249 | bool |
250 | default n if USB_ETH_RNDIS | |
251 | default y if USB_ZERO | |
252 | default y if USB_ETH | |
253 | default y if USB_G_SERIAL | |
254 | ||
c4144247 YS |
255 | config USB_GADGET_R8A66597 |
256 | boolean "Renesas R8A66597 USB Peripheral Controller" | |
257 | select USB_GADGET_DUALSPEED | |
258 | help | |
259 | R8A66597 is a discrete USB host and peripheral controller chip that | |
260 | supports both full and high speed USB 2.0 data transfers. | |
261 | It has nine configurable endpoints, and endpoint zero. | |
262 | ||
263 | Say "y" to link the driver statically, or "m" to build a | |
264 | dynamically linked module called "r8a66597_udc" and force all | |
265 | gadget drivers to also be dynamically linked. | |
266 | ||
267 | config USB_R8A66597 | |
268 | tristate | |
269 | depends on USB_GADGET_R8A66597 | |
270 | default USB_GADGET | |
271 | select USB_GADGET_SELECTED | |
272 | ||
d75379a5 RJ |
273 | config USB_GADGET_PXA27X |
274 | boolean "PXA 27x" | |
9f5351b7 | 275 | depends on ARCH_PXA && (PXA27x || PXA3xx) |
7fec3c25 | 276 | select USB_OTG_UTILS |
d75379a5 RJ |
277 | help |
278 | Intel's PXA 27x series XScale ARM v5TE processors include | |
279 | an integrated full speed USB 1.1 device controller. | |
280 | ||
281 | It has up to 23 endpoints, as well as endpoint zero (for | |
282 | control transfers). | |
283 | ||
284 | Say "y" to link the driver statically, or "m" to build a | |
285 | dynamically linked module called "pxa27x_udc" and force all | |
286 | gadget drivers to also be dynamically linked. | |
287 | ||
288 | config USB_PXA27X | |
289 | tristate | |
290 | depends on USB_GADGET_PXA27X | |
291 | default USB_GADGET | |
292 | select USB_GADGET_SELECTED | |
293 | ||
5b7d70c6 BD |
294 | config USB_GADGET_S3C_HSOTG |
295 | boolean "S3C HS/OtG USB Device controller" | |
296 | depends on S3C_DEV_USB_HSOTG | |
297 | select USB_GADGET_S3C_HSOTG_PIO | |
298 | help | |
299 | The Samsung S3C64XX USB2.0 high-speed gadget controller | |
300 | integrated into the S3C64XX series SoC. | |
301 | ||
302 | config USB_S3C_HSOTG | |
303 | tristate | |
304 | depends on USB_GADGET_S3C_HSOTG | |
305 | default USB_GADGET | |
306 | select USB_GADGET_SELECTED | |
307 | ||
c03e7d4b PZ |
308 | config USB_GADGET_IMX |
309 | boolean "Freescale IMX USB Peripheral Controller" | |
310 | depends on ARCH_MX1 | |
311 | help | |
312 | Freescale's IMX series include an integrated full speed | |
313 | USB 1.1 device controller. The controller in the IMX series | |
314 | is register-compatible. | |
315 | ||
316 | It has Six fixed-function endpoints, as well as endpoint | |
317 | zero (for control transfers). | |
318 | ||
319 | Say "y" to link the driver statically, or "m" to build a | |
320 | dynamically linked module called "imx_udc" and force all | |
321 | gadget drivers to also be dynamically linked. | |
322 | ||
323 | config USB_IMX | |
324 | tristate | |
325 | depends on USB_GADGET_IMX | |
326 | default USB_GADGET | |
327 | select USB_GADGET_SELECTED | |
328 | ||
a7a19fac DB |
329 | config USB_GADGET_S3C2410 |
330 | boolean "S3C2410 USB Device Controller" | |
331 | depends on ARCH_S3C2410 | |
1da177e4 | 332 | help |
a7a19fac DB |
333 | Samsung's S3C2410 is an ARM-4 processor with an integrated |
334 | full speed USB 1.1 device controller. It has 4 configurable | |
335 | endpoints, as well as endpoint zero (for control transfers). | |
1da177e4 | 336 | |
a7a19fac DB |
337 | This driver has been tested on the S3C2410, S3C2412, and |
338 | S3C2440 processors. | |
1da177e4 | 339 | |
a7a19fac | 340 | config USB_S3C2410 |
1da177e4 | 341 | tristate |
a7a19fac | 342 | depends on USB_GADGET_S3C2410 |
1da177e4 | 343 | default USB_GADGET |
028b271b | 344 | select USB_GADGET_SELECTED |
1da177e4 | 345 | |
a7a19fac DB |
346 | config USB_S3C2410_DEBUG |
347 | boolean "S3C2410 udc debug messages" | |
348 | depends on USB_GADGET_S3C2410 | |
1da177e4 | 349 | |
a7a19fac DB |
350 | # |
351 | # Controllers available in both integrated and discrete versions | |
352 | # | |
1da177e4 | 353 | |
a7a19fac | 354 | # musb builds in ../musb along with host support |
550a7375 | 355 | config USB_GADGET_MUSB_HDRC |
085ad406 | 356 | boolean "Inventra HDRC USB Peripheral (TI, ADI, ...)" |
550a7375 FB |
357 | depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG) |
358 | select USB_GADGET_DUALSPEED | |
359 | select USB_GADGET_SELECTED | |
360 | help | |
361 | This OTG-capable silicon IP is used in dual designs including | |
085ad406 | 362 | the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin |
550a7375 | 363 | |
a7a19fac DB |
364 | config USB_GADGET_M66592 |
365 | boolean "Renesas M66592 USB Peripheral Controller" | |
366 | select USB_GADGET_DUALSPEED | |
1da177e4 | 367 | help |
a7a19fac DB |
368 | M66592 is a discrete USB peripheral controller chip that |
369 | supports both full and high speed USB 2.0 data transfers. | |
370 | It has seven configurable endpoints, and endpoint zero. | |
1da177e4 LT |
371 | |
372 | Say "y" to link the driver statically, or "m" to build a | |
a7a19fac | 373 | dynamically linked module called "m66592_udc" and force all |
1da177e4 LT |
374 | gadget drivers to also be dynamically linked. |
375 | ||
a7a19fac | 376 | config USB_M66592 |
1da177e4 | 377 | tristate |
a7a19fac | 378 | depends on USB_GADGET_M66592 |
1da177e4 | 379 | default USB_GADGET |
028b271b | 380 | select USB_GADGET_SELECTED |
1da177e4 | 381 | |
a7a19fac DB |
382 | # |
383 | # Controllers available only in discrete form (and all PCI controllers) | |
384 | # | |
385 | ||
386 | config USB_GADGET_AMD5536UDC | |
387 | boolean "AMD5536 UDC" | |
388 | depends on PCI | |
389 | select USB_GADGET_DUALSPEED | |
3fc154b6 | 390 | help |
a7a19fac DB |
391 | The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. |
392 | It is a USB Highspeed DMA capable USB device controller. Beside ep0 | |
393 | it provides 4 IN and 4 OUT endpoints (bulk or interrupt type). | |
394 | The UDC port supports OTG operation, and may be used as a host port | |
395 | if it's not being used to implement peripheral or OTG roles. | |
3fc154b6 | 396 | |
a7a19fac DB |
397 | Say "y" to link the driver statically, or "m" to build a |
398 | dynamically linked module called "amd5536udc" and force all | |
399 | gadget drivers to also be dynamically linked. | |
3fc154b6 | 400 | |
a7a19fac | 401 | config USB_AMD5536UDC |
3fc154b6 | 402 | tristate |
a7a19fac | 403 | depends on USB_GADGET_AMD5536UDC |
3fc154b6 AP |
404 | default USB_GADGET |
405 | select USB_GADGET_SELECTED | |
406 | ||
3948f0e0 LY |
407 | config USB_GADGET_FSL_QE |
408 | boolean "Freescale QE/CPM USB Device Controller" | |
409 | depends on FSL_SOC && (QUICC_ENGINE || CPM) | |
410 | help | |
411 | Some of Freescale PowerPC processors have a Full Speed | |
412 | QE/CPM2 USB controller, which support device mode with 4 | |
413 | programmable endpoints. This driver supports the | |
414 | controller in the MPC8360 and MPC8272, and should work with | |
415 | controllers having QE or CPM2, given minor tweaks. | |
416 | ||
417 | Set CONFIG_USB_GADGET to "m" to build this driver as a | |
692105b8 | 418 | dynamically linked module called "fsl_qe_udc". |
3948f0e0 LY |
419 | |
420 | config USB_FSL_QE | |
421 | tristate | |
422 | depends on USB_GADGET_FSL_QE | |
423 | default USB_GADGET | |
424 | select USB_GADGET_SELECTED | |
425 | ||
aa69a809 DL |
426 | config USB_GADGET_CI13XXX |
427 | boolean "MIPS USB CI13xxx" | |
428 | depends on PCI | |
429 | select USB_GADGET_DUALSPEED | |
430 | help | |
431 | MIPS USB IP core family device controller | |
432 | Currently it only supports IP part number CI13412 | |
433 | ||
434 | Say "y" to link the driver statically, or "m" to build a | |
435 | dynamically linked module called "ci13xxx_udc" and force all | |
436 | gadget drivers to also be dynamically linked. | |
437 | ||
438 | config USB_CI13XXX | |
439 | tristate | |
440 | depends on USB_GADGET_CI13XXX | |
441 | default USB_GADGET | |
442 | select USB_GADGET_SELECTED | |
443 | ||
a7a19fac DB |
444 | config USB_GADGET_NET2280 |
445 | boolean "NetChip 228x" | |
446 | depends on PCI | |
447 | select USB_GADGET_DUALSPEED | |
448 | help | |
449 | NetChip 2280 / 2282 is a PCI based USB peripheral controller which | |
450 | supports both full and high speed USB 2.0 data transfers. | |
3fc154b6 | 451 | |
a7a19fac DB |
452 | It has six configurable endpoints, as well as endpoint zero |
453 | (for control transfers) and several endpoints with dedicated | |
454 | functions. | |
455 | ||
456 | Say "y" to link the driver statically, or "m" to build a | |
457 | dynamically linked module called "net2280" and force all | |
458 | gadget drivers to also be dynamically linked. | |
459 | ||
460 | config USB_NET2280 | |
461 | tristate | |
462 | depends on USB_GADGET_NET2280 | |
463 | default USB_GADGET | |
bae4bd84 | 464 | select USB_GADGET_SELECTED |
a7a19fac DB |
465 | |
466 | config USB_GADGET_GOKU | |
467 | boolean "Toshiba TC86C001 'Goku-S'" | |
468 | depends on PCI | |
bae4bd84 | 469 | help |
a7a19fac DB |
470 | The Toshiba TC86C001 is a PCI device which includes controllers |
471 | for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). | |
472 | ||
473 | The device controller has three configurable (bulk or interrupt) | |
474 | endpoints, plus endpoint zero (for control transfers). | |
bae4bd84 DB |
475 | |
476 | Say "y" to link the driver statically, or "m" to build a | |
a7a19fac | 477 | dynamically linked module called "goku_udc" and to force all |
bae4bd84 DB |
478 | gadget drivers to also be dynamically linked. |
479 | ||
a7a19fac | 480 | config USB_GOKU |
bae4bd84 | 481 | tristate |
a7a19fac | 482 | depends on USB_GADGET_GOKU |
bae4bd84 | 483 | default USB_GADGET |
a7a19fac DB |
484 | select USB_GADGET_SELECTED |
485 | ||
5be19a9d XS |
486 | config USB_GADGET_LANGWELL |
487 | boolean "Intel Langwell USB Device Controller" | |
488 | depends on PCI | |
489 | select USB_GADGET_DUALSPEED | |
490 | help | |
491 | Intel Langwell USB Device Controller is a High-Speed USB | |
492 | On-The-Go device controller. | |
493 | ||
494 | The number of programmable endpoints is different through | |
495 | controller revision. | |
496 | ||
497 | Say "y" to link the driver statically, or "m" to build a | |
498 | dynamically linked module called "langwell_udc" and force all | |
499 | gadget drivers to also be dynamically linked. | |
500 | ||
501 | config USB_LANGWELL | |
502 | tristate | |
503 | depends on USB_GADGET_LANGWELL | |
504 | default USB_GADGET | |
505 | select USB_GADGET_SELECTED | |
506 | ||
a7a19fac DB |
507 | |
508 | # | |
509 | # LAST -- dummy/emulated controller | |
510 | # | |
1da177e4 LT |
511 | |
512 | config USB_GADGET_DUMMY_HCD | |
513 | boolean "Dummy HCD (DEVELOPMENT)" | |
afd0e0f2 | 514 | depends on USB=y || (USB=m && USB_GADGET=m) |
1da177e4 LT |
515 | select USB_GADGET_DUALSPEED |
516 | help | |
517 | This host controller driver emulates USB, looping all data transfer | |
518 | requests back to a USB "gadget driver" in the same host. The host | |
519 | side is the master; the gadget side is the slave. Gadget drivers | |
520 | can be high, full, or low speed; and they have access to endpoints | |
521 | like those from NET2280, PXA2xx, or SA1100 hardware. | |
522 | ||
523 | This may help in some stages of creating a driver to embed in a | |
524 | Linux device, since it lets you debug several parts of the gadget | |
525 | driver without its hardware or drivers being involved. | |
526 | ||
527 | Since such a gadget side driver needs to interoperate with a host | |
528 | side Linux-USB device driver, this may help to debug both sides | |
529 | of a USB protocol stack. | |
530 | ||
531 | Say "y" to link the driver statically, or "m" to build a | |
532 | dynamically linked module called "dummy_hcd" and force all | |
533 | gadget drivers to also be dynamically linked. | |
534 | ||
535 | config USB_DUMMY_HCD | |
536 | tristate | |
537 | depends on USB_GADGET_DUMMY_HCD | |
538 | default USB_GADGET | |
028b271b | 539 | select USB_GADGET_SELECTED |
1da177e4 LT |
540 | |
541 | # NOTE: Please keep dummy_hcd LAST so that "real hardware" appears | |
542 | # first and will be selected by default. | |
543 | ||
544 | endchoice | |
545 | ||
546 | config USB_GADGET_DUALSPEED | |
547 | bool | |
548 | depends on USB_GADGET | |
549 | default n | |
550 | help | |
551 | Means that gadget drivers should include extra descriptors | |
552 | and code to handle dual-speed controllers. | |
553 | ||
554 | # | |
555 | # USB Gadget Drivers | |
556 | # | |
557 | choice | |
558 | tristate "USB Gadget Drivers" | |
028b271b | 559 | depends on USB_GADGET && USB_GADGET_SELECTED |
1da177e4 LT |
560 | default USB_ETH |
561 | help | |
562 | A Linux "Gadget Driver" talks to the USB Peripheral Controller | |
563 | driver through the abstract "gadget" API. Some other operating | |
564 | systems call these "client" drivers, of which "class drivers" | |
565 | are a subset (implementing a USB device class specification). | |
566 | A gadget driver implements one or more USB functions using | |
567 | the peripheral hardware. | |
568 | ||
569 | Gadget drivers are hardware-neutral, or "platform independent", | |
570 | except that they sometimes must understand quirks or limitations | |
571 | of the particular controllers they work with. For example, when | |
572 | a controller doesn't support alternate configurations or provide | |
573 | enough of the right types of endpoints, the gadget driver might | |
574 | not be able work with that controller, or might need to implement | |
575 | a less common variant of a device class protocol. | |
576 | ||
577 | # this first set of drivers all depend on bulk-capable hardware. | |
578 | ||
579 | config USB_ZERO | |
580 | tristate "Gadget Zero (DEVELOPMENT)" | |
1da177e4 LT |
581 | help |
582 | Gadget Zero is a two-configuration device. It either sinks and | |
583 | sources bulk data; or it loops back a configurable number of | |
584 | transfers. It also implements control requests, for "chapter 9" | |
585 | conformance. The driver needs only two bulk-capable endpoints, so | |
586 | it can work on top of most device-side usb controllers. It's | |
587 | useful for testing, and is also a working example showing how | |
588 | USB "gadget drivers" can be written. | |
589 | ||
590 | Make this be the first driver you try using on top of any new | |
591 | USB peripheral controller driver. Then you can use host-side | |
592 | test software, like the "usbtest" driver, to put your hardware | |
593 | and its driver through a basic set of functional tests. | |
594 | ||
595 | Gadget Zero also works with the host-side "usb-skeleton" driver, | |
596 | and with many kinds of host-side test software. You may need | |
597 | to tweak product and vendor IDs before host software knows about | |
598 | this device, and arrange to select an appropriate configuration. | |
599 | ||
600 | Say "y" to link the driver statically, or "m" to build a | |
601 | dynamically linked module called "g_zero". | |
602 | ||
603 | config USB_ZERO_HNPTEST | |
604 | boolean "HNP Test Device" | |
605 | depends on USB_ZERO && USB_OTG | |
606 | help | |
607 | You can configure this device to enumerate using the device | |
608 | identifiers of the USB-OTG test device. That means that when | |
609 | this gadget connects to another OTG device, with this one using | |
610 | the "B-Peripheral" role, that device will use HNP to let this | |
611 | one serve as the USB host instead (in the "B-Host" role). | |
612 | ||
c6994e6f BW |
613 | config USB_AUDIO |
614 | tristate "Audio Gadget (EXPERIMENTAL)" | |
615 | depends on SND | |
04950737 | 616 | select SND_PCM |
c6994e6f BW |
617 | help |
618 | Gadget Audio is compatible with USB Audio Class specification 1.0. | |
619 | It will include at least one AudioControl interface, zero or more | |
620 | AudioStream interface and zero or more MIDIStream interface. | |
621 | ||
622 | Gadget Audio will use on-board ALSA (CONFIG_SND) audio card to | |
623 | playback or capture audio stream. | |
624 | ||
625 | Say "y" to link the driver statically, or "m" to build a | |
626 | dynamically linked module called "g_audio". | |
627 | ||
1da177e4 LT |
628 | config USB_ETH |
629 | tristate "Ethernet Gadget (with CDC Ethernet support)" | |
630 | depends on NET | |
9e221be8 | 631 | select CRC32 |
1da177e4 | 632 | help |
9b39e9dd BN |
633 | This driver implements Ethernet style communication, in one of |
634 | several ways: | |
1da177e4 LT |
635 | |
636 | - The "Communication Device Class" (CDC) Ethernet Control Model. | |
637 | That protocol is often avoided with pure Ethernet adapters, in | |
638 | favor of simpler vendor-specific hardware, but is widely | |
639 | supported by firmware for smart network devices. | |
640 | ||
641 | - On hardware can't implement that protocol, a simple CDC subset | |
642 | is used, placing fewer demands on USB. | |
643 | ||
9b39e9dd BN |
644 | - CDC Ethernet Emulation Model (EEM) is a newer standard that has |
645 | a simpler interface that can be used by more USB hardware. | |
646 | ||
647 | RNDIS support is an additional option, more demanding than than | |
648 | subset. | |
1da177e4 LT |
649 | |
650 | Within the USB device, this gadget driver exposes a network device | |
651 | "usbX", where X depends on what other networking devices you have. | |
652 | Treat it like a two-node Ethernet link: host, and gadget. | |
653 | ||
654 | The Linux-USB host-side "usbnet" driver interoperates with this | |
655 | driver, so that deep I/O queues can be supported. On 2.4 kernels, | |
656 | use "CDCEther" instead, if you're using the CDC option. That CDC | |
657 | mode should also interoperate with standard CDC Ethernet class | |
658 | drivers on other host operating systems. | |
659 | ||
660 | Say "y" to link the driver statically, or "m" to build a | |
661 | dynamically linked module called "g_ether". | |
662 | ||
663 | config USB_ETH_RNDIS | |
afd0e0f2 RD |
664 | bool "RNDIS support" |
665 | depends on USB_ETH | |
1da177e4 LT |
666 | default y |
667 | help | |
668 | Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, | |
669 | and Microsoft provides redistributable binary RNDIS drivers for | |
670 | older versions of Windows. | |
671 | ||
672 | If you say "y" here, the Ethernet gadget driver will try to provide | |
673 | a second device configuration, supporting RNDIS to talk to such | |
674 | Microsoft USB hosts. | |
675 | ||
676 | To make MS-Windows work with this, use Documentation/usb/linux.inf | |
677 | as the "driver info file". For versions of MS-Windows older than | |
678 | XP, you'll need to download drivers from Microsoft's website; a URL | |
679 | is given in comments found in that info file. | |
680 | ||
9b39e9dd BN |
681 | config USB_ETH_EEM |
682 | bool "Ethernet Emulation Model (EEM) support" | |
683 | depends on USB_ETH | |
684 | default n | |
685 | help | |
686 | CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM | |
687 | and therefore can be supported by more hardware. Technically ECM and | |
688 | EEM are designed for different applications. The ECM model extends | |
689 | the network interface to the target (e.g. a USB cable modem), and the | |
690 | EEM model is for mobile devices to communicate with hosts using | |
691 | ethernet over USB. For Linux gadgets, however, the interface with | |
692 | the host is the same (a usbX device), so the differences are minimal. | |
693 | ||
694 | If you say "y" here, the Ethernet gadget driver will use the EEM | |
695 | protocol rather than ECM. If unsure, say "n". | |
696 | ||
1da177e4 LT |
697 | config USB_GADGETFS |
698 | tristate "Gadget Filesystem (EXPERIMENTAL)" | |
699 | depends on EXPERIMENTAL | |
700 | help | |
701 | This driver provides a filesystem based API that lets user mode | |
702 | programs implement a single-configuration USB device, including | |
703 | endpoint I/O and control requests that don't relate to enumeration. | |
704 | All endpoints, transfer speeds, and transfer types supported by | |
705 | the hardware are available, through read() and write() calls. | |
706 | ||
afd0e0f2 RD |
707 | Currently, this option is still labelled as EXPERIMENTAL because |
708 | of existing race conditions in the underlying in-kernel AIO core. | |
709 | ||
1da177e4 LT |
710 | Say "y" to link the driver statically, or "m" to build a |
711 | dynamically linked module called "gadgetfs". | |
712 | ||
713 | config USB_FILE_STORAGE | |
714 | tristate "File-backed Storage Gadget" | |
87840289 | 715 | depends on BLOCK |
1da177e4 LT |
716 | help |
717 | The File-backed Storage Gadget acts as a USB Mass Storage | |
718 | disk drive. As its storage repository it can use a regular | |
719 | file or a block device (in much the same way as the "loop" | |
720 | device driver), specified as a module parameter. | |
721 | ||
722 | Say "y" to link the driver statically, or "m" to build a | |
723 | dynamically linked module called "g_file_storage". | |
724 | ||
725 | config USB_FILE_STORAGE_TEST | |
726 | bool "File-backed Storage Gadget testing version" | |
727 | depends on USB_FILE_STORAGE | |
728 | default n | |
729 | help | |
730 | Say "y" to generate the larger testing version of the | |
731 | File-backed Storage Gadget, useful for probing the | |
732 | behavior of USB Mass Storage hosts. Not needed for | |
733 | normal operation. | |
734 | ||
d23b0f08 MN |
735 | config USB_MASS_STORAGE |
736 | tristate "Mass Storage Gadget" | |
737 | depends on BLOCK | |
738 | help | |
739 | The Mass Storage Gadget acts as a USB Mass Storage disk drive. | |
740 | As its storage repository it can use a regular file or a block | |
741 | device (in much the same way as the "loop" device driver), | |
742 | specified as a module parameter or sysfs option. | |
743 | ||
744 | This is heavily based on File-backed Storage Gadget and in most | |
745 | cases you will want to use FSG instead. This gadget is mostly | |
746 | here to test the functionality of the Mass Storage Function | |
747 | which may be used with composite framework. | |
748 | ||
749 | Say "y" to link the driver statically, or "m" to build | |
11b10d99 | 750 | a dynamically linked module called "g_mass_storage". If unsure, |
d23b0f08 MN |
751 | consider File-backed Storage Gadget. |
752 | ||
1da177e4 | 753 | config USB_G_SERIAL |
3086775a | 754 | tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" |
1da177e4 LT |
755 | help |
756 | The Serial Gadget talks to the Linux-USB generic serial driver. | |
757 | This driver supports a CDC-ACM module option, which can be used | |
758 | to interoperate with MS-Windows hosts or with the Linux-USB | |
759 | "cdc-acm" driver. | |
760 | ||
3086775a FB |
761 | This driver also supports a CDC-OBEX option. You will need a |
762 | user space OBEX server talking to /dev/ttyGS*, since the kernel | |
763 | itself doesn't implement the OBEX protocol. | |
764 | ||
1da177e4 LT |
765 | Say "y" to link the driver statically, or "m" to build a |
766 | dynamically linked module called "g_serial". | |
767 | ||
768 | For more information, see Documentation/usb/gadget_serial.txt | |
769 | which includes instructions and a "driver info file" needed to | |
3086775a | 770 | make MS-Windows work with CDC ACM. |
1da177e4 | 771 | |
f2ebf92c BW |
772 | config USB_MIDI_GADGET |
773 | tristate "MIDI Gadget (EXPERIMENTAL)" | |
774 | depends on SND && EXPERIMENTAL | |
775 | select SND_RAWMIDI | |
776 | help | |
777 | The MIDI Gadget acts as a USB Audio device, with one MIDI | |
778 | input and one MIDI output. These MIDI jacks appear as | |
779 | a sound "card" in the ALSA sound system. Other MIDI | |
780 | connections can then be made on the gadget system, using | |
781 | ALSA's aconnect utility etc. | |
782 | ||
783 | Say "y" to link the driver statically, or "m" to build a | |
784 | dynamically linked module called "g_midi". | |
785 | ||
25a010c8 CN |
786 | config USB_G_PRINTER |
787 | tristate "Printer Gadget" | |
788 | help | |
789 | The Printer Gadget channels data between the USB host and a | |
790 | userspace program driving the print engine. The user space | |
791 | program reads and writes the device file /dev/g_printer to | |
792 | receive or send printer data. It can use ioctl calls to | |
793 | the device file to get or set printer status. | |
794 | ||
795 | Say "y" to link the driver statically, or "m" to build a | |
796 | dynamically linked module called "g_printer". | |
797 | ||
798 | For more information, see Documentation/usb/gadget_printer.txt | |
799 | which includes sample code for accessing the device file. | |
1da177e4 | 800 | |
19e20680 DB |
801 | config USB_CDC_COMPOSITE |
802 | tristate "CDC Composite Device (Ethernet and ACM)" | |
4ddd9ec1 | 803 | depends on NET |
19e20680 DB |
804 | help |
805 | This driver provides two functions in one configuration: | |
806 | a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link. | |
807 | ||
808 | This driver requires four bulk and two interrupt endpoints, | |
809 | plus the ability to handle altsettings. Not all peripheral | |
810 | controllers are that capable. | |
811 | ||
812 | Say "y" to link the driver statically, or "m" to build a | |
813 | dynamically linked module. | |
814 | ||
f358f5b4 FB |
815 | config USB_G_NOKIA |
816 | tristate "Nokia composite gadget" | |
817 | depends on PHONET | |
818 | help | |
819 | The Nokia composite gadget provides support for acm, obex | |
820 | and phonet in only one composite gadget driver. | |
821 | ||
822 | It's only really useful for N900 hardware. If you're building | |
823 | a kernel for N900, say Y or M here. If unsure, say N. | |
824 | ||
f176a5d8 MN |
825 | config USB_G_MULTI |
826 | tristate "Multifunction Composite Gadget (EXPERIMENTAL)" | |
5791e103 | 827 | depends on BLOCK && NET |
f176a5d8 MN |
828 | help |
829 | The Multifunction Composite Gadget provides Ethernet (RNDIS | |
830 | and/or CDC Ethernet), mass storage and ACM serial link | |
831 | interfaces. | |
832 | ||
5791e103 | 833 | You will be asked to choose which of the two configurations is |
f176a5d8 | 834 | to be available in the gadget. At least one configuration must |
5791e103 | 835 | be chosen to make the gadget usable. Selecting more than one |
f176a5d8 | 836 | configuration will prevent Windows from automatically detecting |
5791e103 | 837 | the gadget as a composite gadget, so an INF file will be needed to |
f176a5d8 MN |
838 | use the gadget. |
839 | ||
840 | Say "y" to link the driver statically, or "m" to build a | |
841 | dynamically linked module called "g_multi". | |
842 | ||
843 | config USB_G_MULTI_RNDIS | |
844 | bool "RNDIS + CDC Serial + Storage configuration" | |
845 | depends on USB_G_MULTI | |
846 | default y | |
847 | help | |
848 | This option enables a configuration with RNDIS, CDC Serial and | |
849 | Mass Storage functions available in the Multifunction Composite | |
5791e103 RD |
850 | Gadget. This is the configuration dedicated for Windows since RNDIS |
851 | is Microsoft's protocol. | |
f176a5d8 MN |
852 | |
853 | If unsure, say "y". | |
854 | ||
855 | config USB_G_MULTI_CDC | |
856 | bool "CDC Ethernet + CDC Serial + Storage configuration" | |
857 | depends on USB_G_MULTI | |
858 | default n | |
859 | help | |
860 | This option enables a configuration with CDC Ethernet (ECM), CDC | |
861 | Serial and Mass Storage functions available in the Multifunction | |
5791e103 | 862 | Composite Gadget. |
f176a5d8 MN |
863 | |
864 | If unsure, say "y". | |
865 | ||
866 | ||
1da177e4 LT |
867 | # put drivers that need isochronous transfer support (for audio |
868 | # or video class gadget drivers), or specific hardware, here. | |
869 | ||
870 | # - none yet | |
871 | ||
872 | endchoice | |
873 | ||
b75be4ab | 874 | endif # USB_GADGET |