Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Copyright (c) 2001-2002 by David Brownell | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify it | |
5 | * under the terms of the GNU General Public License as published by the | |
6 | * Free Software Foundation; either version 2 of the License, or (at your | |
7 | * option) any later version. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, but | |
10 | * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
11 | * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
12 | * for more details. | |
13 | * | |
14 | * You should have received a copy of the GNU General Public License | |
15 | * along with this program; if not, write to the Free Software Foundation, | |
16 | * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
17 | */ | |
18 | ||
19 | ||
20 | #ifdef __KERNEL__ | |
21 | ||
22 | /* This file contains declarations of usbcore internals that are mostly | |
23 | * used or exposed by Host Controller Drivers. | |
24 | */ | |
25 | ||
26 | /* | |
27 | * USB Packet IDs (PIDs) | |
28 | */ | |
29 | #define USB_PID_UNDEF_0 0xf0 | |
30 | #define USB_PID_OUT 0xe1 | |
31 | #define USB_PID_ACK 0xd2 | |
32 | #define USB_PID_DATA0 0xc3 | |
33 | #define USB_PID_PING 0xb4 /* USB 2.0 */ | |
34 | #define USB_PID_SOF 0xa5 | |
35 | #define USB_PID_NYET 0x96 /* USB 2.0 */ | |
36 | #define USB_PID_DATA2 0x87 /* USB 2.0 */ | |
37 | #define USB_PID_SPLIT 0x78 /* USB 2.0 */ | |
38 | #define USB_PID_IN 0x69 | |
39 | #define USB_PID_NAK 0x5a | |
40 | #define USB_PID_DATA1 0x4b | |
41 | #define USB_PID_PREAMBLE 0x3c /* Token mode */ | |
42 | #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */ | |
43 | #define USB_PID_SETUP 0x2d | |
44 | #define USB_PID_STALL 0x1e | |
45 | #define USB_PID_MDATA 0x0f /* USB 2.0 */ | |
46 | ||
47 | /*-------------------------------------------------------------------------*/ | |
48 | ||
49 | /* | |
50 | * USB Host Controller Driver (usb_hcd) framework | |
51 | * | |
52 | * Since "struct usb_bus" is so thin, you can't share much code in it. | |
53 | * This framework is a layer over that, and should be more sharable. | |
5234ce1b IPG |
54 | * |
55 | * @authorized_default: Specifies if new devices are authorized to | |
56 | * connect by default or they require explicit | |
57 | * user space authorization; this bit is settable | |
58 | * through /sys/class/usb_host/X/authorized_default. | |
59 | * For the rest is RO, so we don't lock to r/w it. | |
1da177e4 LT |
60 | */ |
61 | ||
62 | /*-------------------------------------------------------------------------*/ | |
63 | ||
17200583 | 64 | struct usb_hcd { |
1da177e4 LT |
65 | |
66 | /* | |
67 | * housekeeping | |
68 | */ | |
69 | struct usb_bus self; /* hcd is-a bus */ | |
17200583 | 70 | struct kref kref; /* reference counter */ |
1da177e4 LT |
71 | |
72 | const char *product_desc; /* product/vendor string */ | |
73 | char irq_descr[24]; /* driver + bus # */ | |
74 | ||
d5926ae7 AS |
75 | struct timer_list rh_timer; /* drives root-hub polling */ |
76 | struct urb *status_urb; /* the current status urb */ | |
6b157c9b AS |
77 | #ifdef CONFIG_PM |
78 | struct work_struct wakeup_work; /* for remote wakeup */ | |
79 | #endif | |
1da177e4 LT |
80 | |
81 | /* | |
82 | * hardware info/state | |
83 | */ | |
84 | const struct hc_driver *driver; /* hw-specific hooks */ | |
8de98402 BH |
85 | |
86 | /* Flags that need to be manipulated atomically */ | |
87 | unsigned long flags; | |
88 | #define HCD_FLAG_HW_ACCESSIBLE 0x00000001 | |
89 | #define HCD_FLAG_SAW_IRQ 0x00000002 | |
90 | ||
1da177e4 LT |
91 | unsigned rh_registered:1;/* is root hub registered? */ |
92 | ||
d5926ae7 AS |
93 | /* The next flag is a stopgap, to be removed when all the HCDs |
94 | * support the new root-hub polling mechanism. */ | |
95 | unsigned uses_new_polling:1; | |
96 | unsigned poll_rh:1; /* poll for rh status? */ | |
97 | unsigned poll_pending:1; /* status has changed? */ | |
0165de09 | 98 | unsigned wireless:1; /* Wireless USB HCD */ |
5234ce1b | 99 | unsigned authorized_default:1; |
d5926ae7 | 100 | |
1da177e4 LT |
101 | int irq; /* irq allocated */ |
102 | void __iomem *regs; /* device memory/io */ | |
103 | u64 rsrc_start; /* memory/io resource start */ | |
104 | u64 rsrc_len; /* memory/io resource length */ | |
7d35b929 | 105 | unsigned power_budget; /* in mA, 0 = no limit */ |
1da177e4 LT |
106 | |
107 | #define HCD_BUFFER_POOLS 4 | |
108 | struct dma_pool *pool [HCD_BUFFER_POOLS]; | |
109 | ||
110 | int state; | |
111 | # define __ACTIVE 0x01 | |
112 | # define __SUSPEND 0x04 | |
113 | # define __TRANSIENT 0x80 | |
114 | ||
115 | # define HC_STATE_HALT 0 | |
116 | # define HC_STATE_RUNNING (__ACTIVE) | |
117 | # define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE) | |
118 | # define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT) | |
119 | # define HC_STATE_SUSPENDED (__SUSPEND) | |
120 | ||
121 | #define HC_IS_RUNNING(state) ((state) & __ACTIVE) | |
122 | #define HC_IS_SUSPENDED(state) ((state) & __SUSPEND) | |
123 | ||
124 | /* more shared queuing code would be good; it should support | |
125 | * smarter scheduling, handle transaction translators, etc; | |
126 | * input size of periodic table to an interrupt scheduler. | |
127 | * (ohci 32, uhci 1024, ehci 256/512/1024). | |
128 | */ | |
129 | ||
130 | /* The HC driver's private data is stored at the end of | |
131 | * this structure. | |
132 | */ | |
133 | unsigned long hcd_priv[0] | |
134 | __attribute__ ((aligned (sizeof(unsigned long)))); | |
135 | }; | |
136 | ||
137 | /* 2.4 does this a bit differently ... */ | |
138 | static inline struct usb_bus *hcd_to_bus (struct usb_hcd *hcd) | |
139 | { | |
140 | return &hcd->self; | |
141 | } | |
142 | ||
17200583 AS |
143 | static inline struct usb_hcd *bus_to_hcd (struct usb_bus *bus) |
144 | { | |
145 | return container_of(bus, struct usb_hcd, self); | |
146 | } | |
1da177e4 LT |
147 | |
148 | struct hcd_timeout { /* timeouts we allocate */ | |
149 | struct list_head timeout_list; | |
150 | struct timer_list timer; | |
151 | }; | |
152 | ||
153 | /*-------------------------------------------------------------------------*/ | |
154 | ||
1da177e4 | 155 | |
1da177e4 LT |
156 | struct hc_driver { |
157 | const char *description; /* "ehci-hcd" etc */ | |
158 | const char *product_desc; /* product/vendor string */ | |
159 | size_t hcd_priv_size; /* size of private data */ | |
160 | ||
161 | /* irq handler */ | |
7d12e780 | 162 | irqreturn_t (*irq) (struct usb_hcd *hcd); |
1da177e4 LT |
163 | |
164 | int flags; | |
165 | #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */ | |
166 | #define HCD_USB11 0x0010 /* USB 1.1 */ | |
167 | #define HCD_USB2 0x0020 /* USB 2.0 */ | |
168 | ||
169 | /* called to init HCD and root hub */ | |
170 | int (*reset) (struct usb_hcd *hcd); | |
171 | int (*start) (struct usb_hcd *hcd); | |
172 | ||
173 | /* NOTE: these suspend/resume calls relate to the HC as | |
5f827ea3 | 174 | * a whole, not just the root hub; they're for PCI bus glue. |
1da177e4 | 175 | */ |
5f827ea3 | 176 | /* called after suspending the hub, before entering D3 etc */ |
9a5d3e98 | 177 | int (*suspend) (struct usb_hcd *hcd, pm_message_t message); |
1da177e4 | 178 | |
5f827ea3 | 179 | /* called after entering D0 (etc), before resuming the hub */ |
1da177e4 LT |
180 | int (*resume) (struct usb_hcd *hcd); |
181 | ||
182 | /* cleanly make HCD stop writing memory and doing I/O */ | |
183 | void (*stop) (struct usb_hcd *hcd); | |
184 | ||
64a21d02 AG |
185 | /* shutdown HCD */ |
186 | void (*shutdown) (struct usb_hcd *hcd); | |
187 | ||
1da177e4 LT |
188 | /* return current frame number */ |
189 | int (*get_frame_number) (struct usb_hcd *hcd); | |
190 | ||
191 | /* manage i/o requests, device state */ | |
192 | int (*urb_enqueue) (struct usb_hcd *hcd, | |
193 | struct usb_host_endpoint *ep, | |
194 | struct urb *urb, | |
55016f10 | 195 | gfp_t mem_flags); |
1da177e4 LT |
196 | int (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb); |
197 | ||
198 | /* hw synch, freeing endpoint resources that urb_dequeue can't */ | |
199 | void (*endpoint_disable)(struct usb_hcd *hcd, | |
200 | struct usb_host_endpoint *ep); | |
201 | ||
202 | /* root hub support */ | |
203 | int (*hub_status_data) (struct usb_hcd *hcd, char *buf); | |
204 | int (*hub_control) (struct usb_hcd *hcd, | |
205 | u16 typeReq, u16 wValue, u16 wIndex, | |
206 | char *buf, u16 wLength); | |
0c0382e3 AS |
207 | int (*bus_suspend)(struct usb_hcd *); |
208 | int (*bus_resume)(struct usb_hcd *); | |
1da177e4 | 209 | int (*start_port_reset)(struct usb_hcd *, unsigned port_num); |
d5926ae7 AS |
210 | void (*hub_irq_enable)(struct usb_hcd *); |
211 | /* Needed only if port-change IRQs are level-triggered */ | |
1da177e4 LT |
212 | }; |
213 | ||
a6d2bb9f AS |
214 | extern int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags); |
215 | extern int usb_hcd_unlink_urb (struct urb *urb, int status); | |
7d12e780 | 216 | extern void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb); |
a6d2bb9f AS |
217 | extern void usb_hcd_endpoint_disable (struct usb_device *udev, |
218 | struct usb_host_endpoint *ep); | |
219 | extern int usb_hcd_get_frame_number (struct usb_device *udev); | |
1da177e4 LT |
220 | |
221 | extern struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, | |
222 | struct device *dev, char *bus_name); | |
17200583 | 223 | extern struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd); |
1da177e4 LT |
224 | extern void usb_put_hcd (struct usb_hcd *hcd); |
225 | extern int usb_add_hcd(struct usb_hcd *hcd, | |
226 | unsigned int irqnum, unsigned long irqflags); | |
227 | extern void usb_remove_hcd(struct usb_hcd *hcd); | |
228 | ||
64a21d02 AG |
229 | struct platform_device; |
230 | extern void usb_hcd_platform_shutdown(struct platform_device* dev); | |
231 | ||
1da177e4 LT |
232 | #ifdef CONFIG_PCI |
233 | struct pci_dev; | |
234 | struct pci_device_id; | |
235 | extern int usb_hcd_pci_probe (struct pci_dev *dev, | |
236 | const struct pci_device_id *id); | |
237 | extern void usb_hcd_pci_remove (struct pci_dev *dev); | |
238 | ||
239 | #ifdef CONFIG_PM | |
9a5d3e98 | 240 | extern int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t state); |
1da177e4 LT |
241 | extern int usb_hcd_pci_resume (struct pci_dev *dev); |
242 | #endif /* CONFIG_PM */ | |
243 | ||
64a21d02 AG |
244 | extern void usb_hcd_pci_shutdown (struct pci_dev *dev); |
245 | ||
1da177e4 LT |
246 | #endif /* CONFIG_PCI */ |
247 | ||
248 | /* pci-ish (pdev null is ok) buffer alloc/mapping support */ | |
249 | int hcd_buffer_create (struct usb_hcd *hcd); | |
250 | void hcd_buffer_destroy (struct usb_hcd *hcd); | |
251 | ||
252 | void *hcd_buffer_alloc (struct usb_bus *bus, size_t size, | |
55016f10 | 253 | gfp_t mem_flags, dma_addr_t *dma); |
1da177e4 LT |
254 | void hcd_buffer_free (struct usb_bus *bus, size_t size, |
255 | void *addr, dma_addr_t dma); | |
256 | ||
257 | /* generic bus glue, needed for host controllers that don't use PCI */ | |
7d12e780 | 258 | extern irqreturn_t usb_hcd_irq (int irq, void *__hcd); |
d5926ae7 | 259 | |
1da177e4 | 260 | extern void usb_hc_died (struct usb_hcd *hcd); |
d5926ae7 | 261 | extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); |
1da177e4 LT |
262 | |
263 | /* -------------------------------------------------------------------------- */ | |
264 | ||
265 | /* Enumeration is only for the hub driver, or HCD virtual root hubs */ | |
266 | extern struct usb_device *usb_alloc_dev(struct usb_device *parent, | |
267 | struct usb_bus *, unsigned port); | |
268 | extern int usb_new_device(struct usb_device *dev); | |
269 | extern void usb_disconnect(struct usb_device **); | |
270 | ||
271 | extern int usb_get_configuration(struct usb_device *dev); | |
272 | extern void usb_destroy_configuration(struct usb_device *dev); | |
273 | ||
274 | /*-------------------------------------------------------------------------*/ | |
275 | ||
276 | /* | |
277 | * HCD Root Hub support | |
278 | */ | |
279 | ||
280 | #include "hub.h" | |
281 | ||
282 | /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */ | |
283 | #define DeviceRequest \ | |
284 | ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) | |
285 | #define DeviceOutRequest \ | |
286 | ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) | |
287 | ||
288 | #define InterfaceRequest \ | |
289 | ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) | |
290 | ||
291 | #define EndpointRequest \ | |
292 | ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) | |
293 | #define EndpointOutRequest \ | |
294 | ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) | |
295 | ||
296 | /* class requests from the USB 2.0 hub spec, table 11-15 */ | |
297 | /* GetBusState and SetHubDescriptor are optional, omitted */ | |
298 | #define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE) | |
299 | #define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE) | |
300 | #define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR) | |
301 | #define GetHubStatus (0xa000 | USB_REQ_GET_STATUS) | |
302 | #define GetPortStatus (0xa300 | USB_REQ_GET_STATUS) | |
303 | #define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE) | |
304 | #define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE) | |
305 | ||
306 | ||
307 | /*-------------------------------------------------------------------------*/ | |
308 | ||
309 | /* | |
310 | * Generic bandwidth allocation constants/support | |
311 | */ | |
312 | #define FRAME_TIME_USECS 1000L | |
313 | #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */ | |
314 | /* Trying not to use worst-case bit-stuffing | |
315 | of (7/6 * 8 * bytecount) = 9.33 * bytecount */ | |
316 | /* bytecount = data payload byte count */ | |
317 | ||
318 | #define NS_TO_US(ns) ((ns + 500L) / 1000L) | |
319 | /* convert & round nanoseconds to microseconds */ | |
320 | ||
1da177e4 LT |
321 | |
322 | /* | |
323 | * Full/low speed bandwidth allocation constants/support. | |
324 | */ | |
325 | #define BW_HOST_DELAY 1000L /* nanoseconds */ | |
326 | #define BW_HUB_LS_SETUP 333L /* nanoseconds */ | |
327 | /* 4 full-speed bit times (est.) */ | |
328 | ||
329 | #define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */ | |
330 | #define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L) | |
331 | #define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L) | |
332 | ||
1da177e4 | 333 | /* |
498f78e6 | 334 | * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed |
1da177e4 LT |
335 | * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed |
336 | * to preallocate bandwidth) | |
337 | */ | |
338 | #define USB2_HOST_DELAY 5 /* nsec, guess */ | |
f956e7cd DB |
339 | #define HS_NSECS(bytes) ( ((55 * 8 * 2083) \ |
340 | + (2083UL * (3 + BitTime(bytes))))/1000 \ | |
1da177e4 | 341 | + USB2_HOST_DELAY) |
f956e7cd DB |
342 | #define HS_NSECS_ISO(bytes) ( ((38 * 8 * 2083) \ |
343 | + (2083UL * (3 + BitTime(bytes))))/1000 \ | |
1da177e4 | 344 | + USB2_HOST_DELAY) |
498f78e6 DS |
345 | #define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes)) |
346 | #define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes)) | |
1da177e4 LT |
347 | |
348 | extern long usb_calc_bus_time (int speed, int is_input, | |
349 | int isoc, int bytecount); | |
350 | ||
351 | /*-------------------------------------------------------------------------*/ | |
352 | ||
1da177e4 LT |
353 | extern void usb_set_device_state(struct usb_device *udev, |
354 | enum usb_device_state new_state); | |
355 | ||
356 | /*-------------------------------------------------------------------------*/ | |
357 | ||
358 | /* exported only within usbcore */ | |
359 | ||
360 | extern struct list_head usb_bus_list; | |
4186ecf8 | 361 | extern struct mutex usb_bus_list_lock; |
1da177e4 LT |
362 | extern wait_queue_head_t usb_kill_urb_queue; |
363 | ||
d5926ae7 AS |
364 | extern void usb_enable_root_hub_irq (struct usb_bus *bus); |
365 | ||
1da177e4 LT |
366 | extern int usb_find_interface_driver (struct usb_device *dev, |
367 | struct usb_interface *interface); | |
368 | ||
369 | #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) | |
370 | ||
0c0382e3 | 371 | #ifdef CONFIG_PM |
db2d55b7 | 372 | extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd); |
1c50c317 | 373 | extern void usb_root_hub_lost_power (struct usb_device *rhdev); |
686314cf AS |
374 | extern int hcd_bus_suspend(struct usb_device *rhdev); |
375 | extern int hcd_bus_resume(struct usb_device *rhdev); | |
0c0382e3 | 376 | #else |
db2d55b7 AM |
377 | static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) |
378 | { | |
379 | return; | |
380 | } | |
0c0382e3 AS |
381 | #endif /* CONFIG_PM */ |
382 | ||
1da177e4 LT |
383 | /* |
384 | * USB device fs stuff | |
385 | */ | |
386 | ||
387 | #ifdef CONFIG_USB_DEVICEFS | |
388 | ||
389 | /* | |
390 | * these are expected to be called from the USB core/hub thread | |
391 | * with the kernel lock held | |
392 | */ | |
1da177e4 | 393 | extern void usbfs_update_special (void); |
1da177e4 LT |
394 | extern int usbfs_init(void); |
395 | extern void usbfs_cleanup(void); | |
396 | ||
397 | #else /* CONFIG_USB_DEVICEFS */ | |
398 | ||
1da177e4 | 399 | static inline void usbfs_update_special (void) {} |
1da177e4 LT |
400 | static inline int usbfs_init(void) { return 0; } |
401 | static inline void usbfs_cleanup(void) { } | |
402 | ||
403 | #endif /* CONFIG_USB_DEVICEFS */ | |
404 | ||
405 | /*-------------------------------------------------------------------------*/ | |
406 | ||
4749f32d | 407 | #if defined(CONFIG_USB_MON) |
1da177e4 LT |
408 | |
409 | struct usb_mon_operations { | |
410 | void (*urb_submit)(struct usb_bus *bus, struct urb *urb); | |
411 | void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err); | |
412 | void (*urb_complete)(struct usb_bus *bus, struct urb *urb); | |
413 | /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */ | |
1da177e4 LT |
414 | }; |
415 | ||
416 | extern struct usb_mon_operations *mon_ops; | |
417 | ||
418 | static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) | |
419 | { | |
420 | if (bus->monitored) | |
421 | (*mon_ops->urb_submit)(bus, urb); | |
422 | } | |
423 | ||
424 | static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, | |
425 | int error) | |
426 | { | |
427 | if (bus->monitored) | |
428 | (*mon_ops->urb_submit_error)(bus, urb, error); | |
429 | } | |
430 | ||
431 | static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) | |
432 | { | |
433 | if (bus->monitored) | |
434 | (*mon_ops->urb_complete)(bus, urb); | |
435 | } | |
1da177e4 LT |
436 | |
437 | int usb_mon_register(struct usb_mon_operations *ops); | |
438 | void usb_mon_deregister(void); | |
439 | ||
440 | #else | |
441 | ||
442 | static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {} | |
443 | static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, | |
444 | int error) {} | |
445 | static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {} | |
1da177e4 LT |
446 | |
447 | #endif /* CONFIG_USB_MON */ | |
448 | ||
449 | /*-------------------------------------------------------------------------*/ | |
450 | ||
451 | /* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */ | |
452 | // bleech -- resurfaced in 2.4.11 or 2.4.12 | |
453 | #define bitmap DeviceRemovable | |
454 | ||
455 | ||
456 | /*-------------------------------------------------------------------------*/ | |
457 | ||
458 | /* random stuff */ | |
459 | ||
460 | #define RUN_CONTEXT (in_irq () ? "in_irq" \ | |
461 | : (in_interrupt () ? "in_interrupt" : "can sleep")) | |
462 | ||
463 | ||
464 | #endif /* __KERNEL__ */ | |
465 |