Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/char/8250.c | |
3 | * | |
4 | * Driver for 8250/16550-type serial ports | |
5 | * | |
6 | * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. | |
7 | * | |
8 | * Copyright (C) 2001 Russell King. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2 of the License, or | |
13 | * (at your option) any later version. | |
14 | * | |
1da177e4 LT |
15 | * A note about mapbase / membase |
16 | * | |
17 | * mapbase is the physical address of the IO port. | |
18 | * membase is an 'ioremapped' cookie. | |
19 | */ | |
1da177e4 LT |
20 | |
21 | #if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | |
22 | #define SUPPORT_SYSRQ | |
23 | #endif | |
24 | ||
25 | #include <linux/module.h> | |
26 | #include <linux/moduleparam.h> | |
27 | #include <linux/ioport.h> | |
28 | #include <linux/init.h> | |
29 | #include <linux/console.h> | |
30 | #include <linux/sysrq.h> | |
1da177e4 | 31 | #include <linux/delay.h> |
d052d1be | 32 | #include <linux/platform_device.h> |
1da177e4 LT |
33 | #include <linux/tty.h> |
34 | #include <linux/tty_flip.h> | |
35 | #include <linux/serial_reg.h> | |
36 | #include <linux/serial_core.h> | |
37 | #include <linux/serial.h> | |
38 | #include <linux/serial_8250.h> | |
78512ece | 39 | #include <linux/nmi.h> |
f392ecfa | 40 | #include <linux/mutex.h> |
1da177e4 LT |
41 | |
42 | #include <asm/io.h> | |
43 | #include <asm/irq.h> | |
44 | ||
45 | #include "8250.h" | |
46 | ||
b70ac771 DM |
47 | #ifdef CONFIG_SPARC |
48 | #include "suncore.h" | |
49 | #endif | |
50 | ||
1da177e4 LT |
51 | /* |
52 | * Configuration: | |
40663cc7 | 53 | * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option |
1da177e4 LT |
54 | * is unsafe when used on edge-triggered interrupts. |
55 | */ | |
408b664a | 56 | static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; |
1da177e4 | 57 | |
a61c2d78 DJ |
58 | static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; |
59 | ||
8440838b DM |
60 | static struct uart_driver serial8250_reg; |
61 | ||
62 | static int serial_index(struct uart_port *port) | |
63 | { | |
64 | return (serial8250_reg.minor - 64) + port->line; | |
65 | } | |
66 | ||
1da177e4 LT |
67 | /* |
68 | * Debugging. | |
69 | */ | |
70 | #if 0 | |
71 | #define DEBUG_AUTOCONF(fmt...) printk(fmt) | |
72 | #else | |
73 | #define DEBUG_AUTOCONF(fmt...) do { } while (0) | |
74 | #endif | |
75 | ||
76 | #if 0 | |
77 | #define DEBUG_INTR(fmt...) printk(fmt) | |
78 | #else | |
79 | #define DEBUG_INTR(fmt...) do { } while (0) | |
80 | #endif | |
81 | ||
82 | #define PASS_LIMIT 256 | |
83 | ||
84 | /* | |
85 | * We default to IRQ0 for the "no irq" hack. Some | |
86 | * machine types want others as well - they're free | |
87 | * to redefine this in their header file. | |
88 | */ | |
89 | #define is_real_interrupt(irq) ((irq) != 0) | |
90 | ||
1da177e4 LT |
91 | #ifdef CONFIG_SERIAL_8250_DETECT_IRQ |
92 | #define CONFIG_SERIAL_DETECT_IRQ 1 | |
93 | #endif | |
1da177e4 LT |
94 | #ifdef CONFIG_SERIAL_8250_MANY_PORTS |
95 | #define CONFIG_SERIAL_MANY_PORTS 1 | |
96 | #endif | |
97 | ||
98 | /* | |
99 | * HUB6 is always on. This will be removed once the header | |
100 | * files have been cleaned. | |
101 | */ | |
102 | #define CONFIG_HUB6 1 | |
103 | ||
a4ed1e41 | 104 | #include <asm/serial.h> |
1da177e4 LT |
105 | /* |
106 | * SERIAL_PORT_DFNS tells us about built-in ports that have no | |
107 | * standard enumeration mechanism. Platforms that can find all | |
108 | * serial ports via mechanisms like ACPI or PCI need not supply it. | |
109 | */ | |
110 | #ifndef SERIAL_PORT_DFNS | |
111 | #define SERIAL_PORT_DFNS | |
112 | #endif | |
113 | ||
cb3592be | 114 | static const struct old_serial_port old_serial_port[] = { |
1da177e4 LT |
115 | SERIAL_PORT_DFNS /* defined in asm/serial.h */ |
116 | }; | |
117 | ||
026d02a2 | 118 | #define UART_NR CONFIG_SERIAL_8250_NR_UARTS |
1da177e4 LT |
119 | |
120 | #ifdef CONFIG_SERIAL_8250_RSA | |
121 | ||
122 | #define PORT_RSA_MAX 4 | |
123 | static unsigned long probe_rsa[PORT_RSA_MAX]; | |
124 | static unsigned int probe_rsa_count; | |
125 | #endif /* CONFIG_SERIAL_8250_RSA */ | |
126 | ||
127 | struct uart_8250_port { | |
128 | struct uart_port port; | |
129 | struct timer_list timer; /* "no irq" timer */ | |
130 | struct list_head list; /* ports on this IRQ */ | |
4ba5e35d RK |
131 | unsigned short capabilities; /* port capabilities */ |
132 | unsigned short bugs; /* port bugs */ | |
1da177e4 | 133 | unsigned int tx_loadsz; /* transmit fifo load size */ |
1da177e4 LT |
134 | unsigned char acr; |
135 | unsigned char ier; | |
136 | unsigned char lcr; | |
137 | unsigned char mcr; | |
138 | unsigned char mcr_mask; /* mask of user bits */ | |
139 | unsigned char mcr_force; /* mask of forced bits */ | |
ad4c2aa6 CM |
140 | |
141 | /* | |
142 | * Some bits in registers are cleared on a read, so they must | |
143 | * be saved whenever the register is read but the bits will not | |
144 | * be immediately processed. | |
145 | */ | |
146 | #define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS | |
147 | unsigned char lsr_saved_flags; | |
148 | #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA | |
149 | unsigned char msr_saved_flags; | |
1da177e4 LT |
150 | |
151 | /* | |
152 | * We provide a per-port pm hook. | |
153 | */ | |
154 | void (*pm)(struct uart_port *port, | |
155 | unsigned int state, unsigned int old); | |
156 | }; | |
157 | ||
158 | struct irq_info { | |
25db8ad5 AC |
159 | struct hlist_node node; |
160 | int irq; | |
161 | spinlock_t lock; /* Protects list not the hash */ | |
1da177e4 LT |
162 | struct list_head *head; |
163 | }; | |
164 | ||
25db8ad5 AC |
165 | #define NR_IRQ_HASH 32 /* Can be adjusted later */ |
166 | static struct hlist_head irq_lists[NR_IRQ_HASH]; | |
167 | static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */ | |
1da177e4 LT |
168 | |
169 | /* | |
170 | * Here we define the default xmit fifo size used for each type of UART. | |
171 | */ | |
172 | static const struct serial8250_config uart_config[] = { | |
173 | [PORT_UNKNOWN] = { | |
174 | .name = "unknown", | |
175 | .fifo_size = 1, | |
176 | .tx_loadsz = 1, | |
177 | }, | |
178 | [PORT_8250] = { | |
179 | .name = "8250", | |
180 | .fifo_size = 1, | |
181 | .tx_loadsz = 1, | |
182 | }, | |
183 | [PORT_16450] = { | |
184 | .name = "16450", | |
185 | .fifo_size = 1, | |
186 | .tx_loadsz = 1, | |
187 | }, | |
188 | [PORT_16550] = { | |
189 | .name = "16550", | |
190 | .fifo_size = 1, | |
191 | .tx_loadsz = 1, | |
192 | }, | |
193 | [PORT_16550A] = { | |
194 | .name = "16550A", | |
195 | .fifo_size = 16, | |
196 | .tx_loadsz = 16, | |
197 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
198 | .flags = UART_CAP_FIFO, | |
199 | }, | |
200 | [PORT_CIRRUS] = { | |
201 | .name = "Cirrus", | |
202 | .fifo_size = 1, | |
203 | .tx_loadsz = 1, | |
204 | }, | |
205 | [PORT_16650] = { | |
206 | .name = "ST16650", | |
207 | .fifo_size = 1, | |
208 | .tx_loadsz = 1, | |
209 | .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, | |
210 | }, | |
211 | [PORT_16650V2] = { | |
212 | .name = "ST16650V2", | |
213 | .fifo_size = 32, | |
214 | .tx_loadsz = 16, | |
215 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | | |
216 | UART_FCR_T_TRIG_00, | |
217 | .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, | |
218 | }, | |
219 | [PORT_16750] = { | |
220 | .name = "TI16750", | |
221 | .fifo_size = 64, | |
222 | .tx_loadsz = 64, | |
223 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | | |
224 | UART_FCR7_64BYTE, | |
225 | .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE, | |
226 | }, | |
227 | [PORT_STARTECH] = { | |
228 | .name = "Startech", | |
229 | .fifo_size = 1, | |
230 | .tx_loadsz = 1, | |
231 | }, | |
232 | [PORT_16C950] = { | |
233 | .name = "16C950/954", | |
234 | .fifo_size = 128, | |
235 | .tx_loadsz = 128, | |
236 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
237 | .flags = UART_CAP_FIFO, | |
238 | }, | |
239 | [PORT_16654] = { | |
240 | .name = "ST16654", | |
241 | .fifo_size = 64, | |
242 | .tx_loadsz = 32, | |
243 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | | |
244 | UART_FCR_T_TRIG_10, | |
245 | .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, | |
246 | }, | |
247 | [PORT_16850] = { | |
248 | .name = "XR16850", | |
249 | .fifo_size = 128, | |
250 | .tx_loadsz = 128, | |
251 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
252 | .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, | |
253 | }, | |
254 | [PORT_RSA] = { | |
255 | .name = "RSA", | |
256 | .fifo_size = 2048, | |
257 | .tx_loadsz = 2048, | |
258 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11, | |
259 | .flags = UART_CAP_FIFO, | |
260 | }, | |
261 | [PORT_NS16550A] = { | |
262 | .name = "NS16550A", | |
263 | .fifo_size = 16, | |
264 | .tx_loadsz = 16, | |
265 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
266 | .flags = UART_CAP_FIFO | UART_NATSEMI, | |
267 | }, | |
268 | [PORT_XSCALE] = { | |
269 | .name = "XScale", | |
270 | .fifo_size = 32, | |
271 | .tx_loadsz = 32, | |
272 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
273 | .flags = UART_CAP_FIFO | UART_CAP_UUE, | |
274 | }, | |
bd71c182 TK |
275 | [PORT_RM9000] = { |
276 | .name = "RM9000", | |
277 | .fifo_size = 16, | |
278 | .tx_loadsz = 16, | |
279 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
6b06f191 DD |
280 | .flags = UART_CAP_FIFO, |
281 | }, | |
282 | [PORT_OCTEON] = { | |
283 | .name = "OCTEON", | |
284 | .fifo_size = 64, | |
285 | .tx_loadsz = 64, | |
286 | .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, | |
bd71c182 TK |
287 | .flags = UART_CAP_FIFO, |
288 | }, | |
1da177e4 LT |
289 | }; |
290 | ||
bd71c182 | 291 | #if defined (CONFIG_SERIAL_8250_AU1X00) |
21c614a7 PA |
292 | |
293 | /* Au1x00 UART hardware has a weird register layout */ | |
294 | static const u8 au_io_in_map[] = { | |
295 | [UART_RX] = 0, | |
296 | [UART_IER] = 2, | |
297 | [UART_IIR] = 3, | |
298 | [UART_LCR] = 5, | |
299 | [UART_MCR] = 6, | |
300 | [UART_LSR] = 7, | |
301 | [UART_MSR] = 8, | |
302 | }; | |
303 | ||
304 | static const u8 au_io_out_map[] = { | |
305 | [UART_TX] = 1, | |
306 | [UART_IER] = 2, | |
307 | [UART_FCR] = 4, | |
308 | [UART_LCR] = 5, | |
309 | [UART_MCR] = 6, | |
310 | }; | |
311 | ||
312 | /* sane hardware needs no mapping */ | |
7d6a07d1 | 313 | static inline int map_8250_in_reg(struct uart_port *p, int offset) |
21c614a7 | 314 | { |
7d6a07d1 | 315 | if (p->iotype != UPIO_AU) |
21c614a7 PA |
316 | return offset; |
317 | return au_io_in_map[offset]; | |
318 | } | |
319 | ||
7d6a07d1 | 320 | static inline int map_8250_out_reg(struct uart_port *p, int offset) |
21c614a7 | 321 | { |
7d6a07d1 | 322 | if (p->iotype != UPIO_AU) |
21c614a7 PA |
323 | return offset; |
324 | return au_io_out_map[offset]; | |
325 | } | |
326 | ||
6f803cd0 | 327 | #elif defined(CONFIG_SERIAL_8250_RM9K) |
bd71c182 TK |
328 | |
329 | static const u8 | |
330 | regmap_in[8] = { | |
331 | [UART_RX] = 0x00, | |
332 | [UART_IER] = 0x0c, | |
333 | [UART_IIR] = 0x14, | |
334 | [UART_LCR] = 0x1c, | |
335 | [UART_MCR] = 0x20, | |
336 | [UART_LSR] = 0x24, | |
337 | [UART_MSR] = 0x28, | |
338 | [UART_SCR] = 0x2c | |
339 | }, | |
340 | regmap_out[8] = { | |
341 | [UART_TX] = 0x04, | |
342 | [UART_IER] = 0x0c, | |
343 | [UART_FCR] = 0x18, | |
344 | [UART_LCR] = 0x1c, | |
345 | [UART_MCR] = 0x20, | |
346 | [UART_LSR] = 0x24, | |
347 | [UART_MSR] = 0x28, | |
348 | [UART_SCR] = 0x2c | |
349 | }; | |
350 | ||
7d6a07d1 | 351 | static inline int map_8250_in_reg(struct uart_port *p, int offset) |
bd71c182 | 352 | { |
7d6a07d1 | 353 | if (p->iotype != UPIO_RM9000) |
bd71c182 TK |
354 | return offset; |
355 | return regmap_in[offset]; | |
356 | } | |
357 | ||
7d6a07d1 | 358 | static inline int map_8250_out_reg(struct uart_port *p, int offset) |
bd71c182 | 359 | { |
7d6a07d1 | 360 | if (p->iotype != UPIO_RM9000) |
bd71c182 TK |
361 | return offset; |
362 | return regmap_out[offset]; | |
363 | } | |
364 | ||
21c614a7 PA |
365 | #else |
366 | ||
367 | /* sane hardware needs no mapping */ | |
368 | #define map_8250_in_reg(up, offset) (offset) | |
369 | #define map_8250_out_reg(up, offset) (offset) | |
370 | ||
371 | #endif | |
372 | ||
7d6a07d1 | 373 | static unsigned int hub6_serial_in(struct uart_port *p, int offset) |
1da177e4 | 374 | { |
7d6a07d1 DD |
375 | offset = map_8250_in_reg(p, offset) << p->regshift; |
376 | outb(p->hub6 - 1 + offset, p->iobase); | |
377 | return inb(p->iobase + 1); | |
378 | } | |
1da177e4 | 379 | |
7d6a07d1 DD |
380 | static void hub6_serial_out(struct uart_port *p, int offset, int value) |
381 | { | |
382 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
383 | outb(p->hub6 - 1 + offset, p->iobase); | |
384 | outb(value, p->iobase + 1); | |
385 | } | |
1da177e4 | 386 | |
7d6a07d1 DD |
387 | static unsigned int mem_serial_in(struct uart_port *p, int offset) |
388 | { | |
389 | offset = map_8250_in_reg(p, offset) << p->regshift; | |
390 | return readb(p->membase + offset); | |
391 | } | |
1da177e4 | 392 | |
7d6a07d1 DD |
393 | static void mem_serial_out(struct uart_port *p, int offset, int value) |
394 | { | |
395 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
396 | writeb(value, p->membase + offset); | |
397 | } | |
398 | ||
399 | static void mem32_serial_out(struct uart_port *p, int offset, int value) | |
400 | { | |
401 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
402 | writel(value, p->membase + offset); | |
403 | } | |
404 | ||
405 | static unsigned int mem32_serial_in(struct uart_port *p, int offset) | |
406 | { | |
407 | offset = map_8250_in_reg(p, offset) << p->regshift; | |
408 | return readl(p->membase + offset); | |
409 | } | |
1da177e4 | 410 | |
21c614a7 | 411 | #ifdef CONFIG_SERIAL_8250_AU1X00 |
7d6a07d1 DD |
412 | static unsigned int au_serial_in(struct uart_port *p, int offset) |
413 | { | |
414 | offset = map_8250_in_reg(p, offset) << p->regshift; | |
415 | return __raw_readl(p->membase + offset); | |
416 | } | |
417 | ||
418 | static void au_serial_out(struct uart_port *p, int offset, int value) | |
419 | { | |
420 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
421 | __raw_writel(value, p->membase + offset); | |
422 | } | |
21c614a7 PA |
423 | #endif |
424 | ||
7d6a07d1 DD |
425 | static unsigned int tsi_serial_in(struct uart_port *p, int offset) |
426 | { | |
427 | unsigned int tmp; | |
428 | offset = map_8250_in_reg(p, offset) << p->regshift; | |
429 | if (offset == UART_IIR) { | |
430 | tmp = readl(p->membase + (UART_IIR & ~3)); | |
431 | return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ | |
432 | } else | |
433 | return readb(p->membase + offset); | |
434 | } | |
3be91ec7 | 435 | |
7d6a07d1 DD |
436 | static void tsi_serial_out(struct uart_port *p, int offset, int value) |
437 | { | |
438 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
439 | if (!((offset == UART_IER) && (value & UART_IER_UUE))) | |
440 | writeb(value, p->membase + offset); | |
1da177e4 LT |
441 | } |
442 | ||
7d6a07d1 | 443 | static void dwapb_serial_out(struct uart_port *p, int offset, int value) |
1da177e4 | 444 | { |
beab697a | 445 | int save_offset = offset; |
7d6a07d1 DD |
446 | offset = map_8250_out_reg(p, offset) << p->regshift; |
447 | /* Save the LCR value so it can be re-written when a | |
448 | * Busy Detect interrupt occurs. */ | |
449 | if (save_offset == UART_LCR) { | |
450 | struct uart_8250_port *up = (struct uart_8250_port *)p; | |
451 | up->lcr = value; | |
452 | } | |
453 | writeb(value, p->membase + offset); | |
454 | /* Read the IER to ensure any interrupt is cleared before | |
455 | * returning from ISR. */ | |
456 | if (save_offset == UART_TX || save_offset == UART_IER) | |
457 | value = p->serial_in(p, UART_IER); | |
458 | } | |
1da177e4 | 459 | |
7d6a07d1 DD |
460 | static unsigned int io_serial_in(struct uart_port *p, int offset) |
461 | { | |
462 | offset = map_8250_in_reg(p, offset) << p->regshift; | |
463 | return inb(p->iobase + offset); | |
464 | } | |
465 | ||
466 | static void io_serial_out(struct uart_port *p, int offset, int value) | |
467 | { | |
468 | offset = map_8250_out_reg(p, offset) << p->regshift; | |
469 | outb(value, p->iobase + offset); | |
470 | } | |
471 | ||
472 | static void set_io_from_upio(struct uart_port *p) | |
473 | { | |
474 | switch (p->iotype) { | |
1da177e4 | 475 | case UPIO_HUB6: |
7d6a07d1 DD |
476 | p->serial_in = hub6_serial_in; |
477 | p->serial_out = hub6_serial_out; | |
1da177e4 LT |
478 | break; |
479 | ||
480 | case UPIO_MEM: | |
7d6a07d1 DD |
481 | p->serial_in = mem_serial_in; |
482 | p->serial_out = mem_serial_out; | |
1da177e4 LT |
483 | break; |
484 | ||
bd71c182 | 485 | case UPIO_RM9000: |
1da177e4 | 486 | case UPIO_MEM32: |
7d6a07d1 DD |
487 | p->serial_in = mem32_serial_in; |
488 | p->serial_out = mem32_serial_out; | |
1da177e4 LT |
489 | break; |
490 | ||
21c614a7 PA |
491 | #ifdef CONFIG_SERIAL_8250_AU1X00 |
492 | case UPIO_AU: | |
7d6a07d1 DD |
493 | p->serial_in = au_serial_in; |
494 | p->serial_out = au_serial_out; | |
21c614a7 PA |
495 | break; |
496 | #endif | |
3be91ec7 | 497 | case UPIO_TSI: |
7d6a07d1 DD |
498 | p->serial_in = tsi_serial_in; |
499 | p->serial_out = tsi_serial_out; | |
3be91ec7 | 500 | break; |
21c614a7 | 501 | |
beab697a | 502 | case UPIO_DWAPB: |
7d6a07d1 DD |
503 | p->serial_in = mem_serial_in; |
504 | p->serial_out = dwapb_serial_out; | |
beab697a MSJ |
505 | break; |
506 | ||
1da177e4 | 507 | default: |
7d6a07d1 DD |
508 | p->serial_in = io_serial_in; |
509 | p->serial_out = io_serial_out; | |
510 | break; | |
1da177e4 LT |
511 | } |
512 | } | |
513 | ||
40b36daa AW |
514 | static void |
515 | serial_out_sync(struct uart_8250_port *up, int offset, int value) | |
516 | { | |
7d6a07d1 DD |
517 | struct uart_port *p = &up->port; |
518 | switch (p->iotype) { | |
40b36daa AW |
519 | case UPIO_MEM: |
520 | case UPIO_MEM32: | |
521 | #ifdef CONFIG_SERIAL_8250_AU1X00 | |
522 | case UPIO_AU: | |
523 | #endif | |
beab697a | 524 | case UPIO_DWAPB: |
7d6a07d1 DD |
525 | p->serial_out(p, offset, value); |
526 | p->serial_in(p, UART_LCR); /* safe, no side-effects */ | |
40b36daa AW |
527 | break; |
528 | default: | |
7d6a07d1 | 529 | p->serial_out(p, offset, value); |
40b36daa AW |
530 | } |
531 | } | |
532 | ||
7d6a07d1 DD |
533 | #define serial_in(up, offset) \ |
534 | (up->port.serial_in(&(up)->port, (offset))) | |
535 | #define serial_out(up, offset, value) \ | |
536 | (up->port.serial_out(&(up)->port, (offset), (value))) | |
1da177e4 LT |
537 | /* |
538 | * We used to support using pause I/O for certain machines. We | |
539 | * haven't supported this for a while, but just in case it's badly | |
540 | * needed for certain old 386 machines, I've left these #define's | |
541 | * in.... | |
542 | */ | |
543 | #define serial_inp(up, offset) serial_in(up, offset) | |
544 | #define serial_outp(up, offset, value) serial_out(up, offset, value) | |
545 | ||
b32b19b8 JAH |
546 | /* Uart divisor latch read */ |
547 | static inline int _serial_dl_read(struct uart_8250_port *up) | |
548 | { | |
549 | return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8; | |
550 | } | |
551 | ||
552 | /* Uart divisor latch write */ | |
553 | static inline void _serial_dl_write(struct uart_8250_port *up, int value) | |
554 | { | |
555 | serial_outp(up, UART_DLL, value & 0xff); | |
556 | serial_outp(up, UART_DLM, value >> 8 & 0xff); | |
557 | } | |
558 | ||
6f803cd0 | 559 | #if defined(CONFIG_SERIAL_8250_AU1X00) |
b32b19b8 JAH |
560 | /* Au1x00 haven't got a standard divisor latch */ |
561 | static int serial_dl_read(struct uart_8250_port *up) | |
562 | { | |
563 | if (up->port.iotype == UPIO_AU) | |
564 | return __raw_readl(up->port.membase + 0x28); | |
565 | else | |
566 | return _serial_dl_read(up); | |
567 | } | |
568 | ||
569 | static void serial_dl_write(struct uart_8250_port *up, int value) | |
570 | { | |
571 | if (up->port.iotype == UPIO_AU) | |
572 | __raw_writel(value, up->port.membase + 0x28); | |
573 | else | |
574 | _serial_dl_write(up, value); | |
575 | } | |
6f803cd0 | 576 | #elif defined(CONFIG_SERIAL_8250_RM9K) |
bd71c182 TK |
577 | static int serial_dl_read(struct uart_8250_port *up) |
578 | { | |
579 | return (up->port.iotype == UPIO_RM9000) ? | |
580 | (((__raw_readl(up->port.membase + 0x10) << 8) | | |
581 | (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) : | |
582 | _serial_dl_read(up); | |
583 | } | |
584 | ||
585 | static void serial_dl_write(struct uart_8250_port *up, int value) | |
586 | { | |
587 | if (up->port.iotype == UPIO_RM9000) { | |
588 | __raw_writel(value, up->port.membase + 0x08); | |
589 | __raw_writel(value >> 8, up->port.membase + 0x10); | |
590 | } else { | |
591 | _serial_dl_write(up, value); | |
592 | } | |
593 | } | |
b32b19b8 JAH |
594 | #else |
595 | #define serial_dl_read(up) _serial_dl_read(up) | |
596 | #define serial_dl_write(up, value) _serial_dl_write(up, value) | |
597 | #endif | |
1da177e4 LT |
598 | |
599 | /* | |
600 | * For the 16C950 | |
601 | */ | |
602 | static void serial_icr_write(struct uart_8250_port *up, int offset, int value) | |
603 | { | |
604 | serial_out(up, UART_SCR, offset); | |
605 | serial_out(up, UART_ICR, value); | |
606 | } | |
607 | ||
608 | static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) | |
609 | { | |
610 | unsigned int value; | |
611 | ||
612 | serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); | |
613 | serial_out(up, UART_SCR, offset); | |
614 | value = serial_in(up, UART_ICR); | |
615 | serial_icr_write(up, UART_ACR, up->acr); | |
616 | ||
617 | return value; | |
618 | } | |
619 | ||
620 | /* | |
621 | * FIFO support. | |
622 | */ | |
b5d674ab | 623 | static void serial8250_clear_fifos(struct uart_8250_port *p) |
1da177e4 LT |
624 | { |
625 | if (p->capabilities & UART_CAP_FIFO) { | |
626 | serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO); | |
627 | serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO | | |
628 | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); | |
629 | serial_outp(p, UART_FCR, 0); | |
630 | } | |
631 | } | |
632 | ||
633 | /* | |
634 | * IER sleep support. UARTs which have EFRs need the "extended | |
635 | * capability" bit enabled. Note that on XR16C850s, we need to | |
636 | * reset LCR to write to IER. | |
637 | */ | |
b5d674ab | 638 | static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) |
1da177e4 LT |
639 | { |
640 | if (p->capabilities & UART_CAP_SLEEP) { | |
641 | if (p->capabilities & UART_CAP_EFR) { | |
642 | serial_outp(p, UART_LCR, 0xBF); | |
643 | serial_outp(p, UART_EFR, UART_EFR_ECB); | |
644 | serial_outp(p, UART_LCR, 0); | |
645 | } | |
646 | serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); | |
647 | if (p->capabilities & UART_CAP_EFR) { | |
648 | serial_outp(p, UART_LCR, 0xBF); | |
649 | serial_outp(p, UART_EFR, 0); | |
650 | serial_outp(p, UART_LCR, 0); | |
651 | } | |
652 | } | |
653 | } | |
654 | ||
655 | #ifdef CONFIG_SERIAL_8250_RSA | |
656 | /* | |
657 | * Attempts to turn on the RSA FIFO. Returns zero on failure. | |
658 | * We set the port uart clock rate if we succeed. | |
659 | */ | |
660 | static int __enable_rsa(struct uart_8250_port *up) | |
661 | { | |
662 | unsigned char mode; | |
663 | int result; | |
664 | ||
665 | mode = serial_inp(up, UART_RSA_MSR); | |
666 | result = mode & UART_RSA_MSR_FIFO; | |
667 | ||
668 | if (!result) { | |
669 | serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); | |
670 | mode = serial_inp(up, UART_RSA_MSR); | |
671 | result = mode & UART_RSA_MSR_FIFO; | |
672 | } | |
673 | ||
674 | if (result) | |
675 | up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; | |
676 | ||
677 | return result; | |
678 | } | |
679 | ||
680 | static void enable_rsa(struct uart_8250_port *up) | |
681 | { | |
682 | if (up->port.type == PORT_RSA) { | |
683 | if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { | |
684 | spin_lock_irq(&up->port.lock); | |
685 | __enable_rsa(up); | |
686 | spin_unlock_irq(&up->port.lock); | |
687 | } | |
688 | if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) | |
689 | serial_outp(up, UART_RSA_FRR, 0); | |
690 | } | |
691 | } | |
692 | ||
693 | /* | |
694 | * Attempts to turn off the RSA FIFO. Returns zero on failure. | |
695 | * It is unknown why interrupts were disabled in here. However, | |
696 | * the caller is expected to preserve this behaviour by grabbing | |
697 | * the spinlock before calling this function. | |
698 | */ | |
699 | static void disable_rsa(struct uart_8250_port *up) | |
700 | { | |
701 | unsigned char mode; | |
702 | int result; | |
703 | ||
704 | if (up->port.type == PORT_RSA && | |
705 | up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { | |
706 | spin_lock_irq(&up->port.lock); | |
707 | ||
708 | mode = serial_inp(up, UART_RSA_MSR); | |
709 | result = !(mode & UART_RSA_MSR_FIFO); | |
710 | ||
711 | if (!result) { | |
712 | serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); | |
713 | mode = serial_inp(up, UART_RSA_MSR); | |
714 | result = !(mode & UART_RSA_MSR_FIFO); | |
715 | } | |
716 | ||
717 | if (result) | |
718 | up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; | |
719 | spin_unlock_irq(&up->port.lock); | |
720 | } | |
721 | } | |
722 | #endif /* CONFIG_SERIAL_8250_RSA */ | |
723 | ||
724 | /* | |
725 | * This is a quickie test to see how big the FIFO is. | |
726 | * It doesn't work at all the time, more's the pity. | |
727 | */ | |
728 | static int size_fifo(struct uart_8250_port *up) | |
729 | { | |
b32b19b8 JAH |
730 | unsigned char old_fcr, old_mcr, old_lcr; |
731 | unsigned short old_dl; | |
1da177e4 LT |
732 | int count; |
733 | ||
734 | old_lcr = serial_inp(up, UART_LCR); | |
735 | serial_outp(up, UART_LCR, 0); | |
736 | old_fcr = serial_inp(up, UART_FCR); | |
737 | old_mcr = serial_inp(up, UART_MCR); | |
738 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | | |
739 | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); | |
740 | serial_outp(up, UART_MCR, UART_MCR_LOOP); | |
741 | serial_outp(up, UART_LCR, UART_LCR_DLAB); | |
b32b19b8 JAH |
742 | old_dl = serial_dl_read(up); |
743 | serial_dl_write(up, 0x0001); | |
1da177e4 LT |
744 | serial_outp(up, UART_LCR, 0x03); |
745 | for (count = 0; count < 256; count++) | |
746 | serial_outp(up, UART_TX, count); | |
747 | mdelay(20);/* FIXME - schedule_timeout */ | |
748 | for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) && | |
749 | (count < 256); count++) | |
750 | serial_inp(up, UART_RX); | |
751 | serial_outp(up, UART_FCR, old_fcr); | |
752 | serial_outp(up, UART_MCR, old_mcr); | |
753 | serial_outp(up, UART_LCR, UART_LCR_DLAB); | |
b32b19b8 | 754 | serial_dl_write(up, old_dl); |
1da177e4 LT |
755 | serial_outp(up, UART_LCR, old_lcr); |
756 | ||
757 | return count; | |
758 | } | |
759 | ||
760 | /* | |
761 | * Read UART ID using the divisor method - set DLL and DLM to zero | |
762 | * and the revision will be in DLL and device type in DLM. We | |
763 | * preserve the device state across this. | |
764 | */ | |
765 | static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) | |
766 | { | |
767 | unsigned char old_dll, old_dlm, old_lcr; | |
768 | unsigned int id; | |
769 | ||
770 | old_lcr = serial_inp(p, UART_LCR); | |
771 | serial_outp(p, UART_LCR, UART_LCR_DLAB); | |
772 | ||
773 | old_dll = serial_inp(p, UART_DLL); | |
774 | old_dlm = serial_inp(p, UART_DLM); | |
775 | ||
776 | serial_outp(p, UART_DLL, 0); | |
777 | serial_outp(p, UART_DLM, 0); | |
778 | ||
779 | id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8; | |
780 | ||
781 | serial_outp(p, UART_DLL, old_dll); | |
782 | serial_outp(p, UART_DLM, old_dlm); | |
783 | serial_outp(p, UART_LCR, old_lcr); | |
784 | ||
785 | return id; | |
786 | } | |
787 | ||
788 | /* | |
789 | * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. | |
790 | * When this function is called we know it is at least a StarTech | |
791 | * 16650 V2, but it might be one of several StarTech UARTs, or one of | |
792 | * its clones. (We treat the broken original StarTech 16650 V1 as a | |
793 | * 16550, and why not? Startech doesn't seem to even acknowledge its | |
794 | * existence.) | |
bd71c182 | 795 | * |
1da177e4 LT |
796 | * What evil have men's minds wrought... |
797 | */ | |
798 | static void autoconfig_has_efr(struct uart_8250_port *up) | |
799 | { | |
800 | unsigned int id1, id2, id3, rev; | |
801 | ||
802 | /* | |
803 | * Everything with an EFR has SLEEP | |
804 | */ | |
805 | up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; | |
806 | ||
807 | /* | |
808 | * First we check to see if it's an Oxford Semiconductor UART. | |
809 | * | |
810 | * If we have to do this here because some non-National | |
811 | * Semiconductor clone chips lock up if you try writing to the | |
812 | * LSR register (which serial_icr_read does) | |
813 | */ | |
814 | ||
815 | /* | |
816 | * Check for Oxford Semiconductor 16C950. | |
817 | * | |
818 | * EFR [4] must be set else this test fails. | |
819 | * | |
820 | * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca) | |
821 | * claims that it's needed for 952 dual UART's (which are not | |
822 | * recommended for new designs). | |
823 | */ | |
824 | up->acr = 0; | |
825 | serial_out(up, UART_LCR, 0xBF); | |
826 | serial_out(up, UART_EFR, UART_EFR_ECB); | |
827 | serial_out(up, UART_LCR, 0x00); | |
828 | id1 = serial_icr_read(up, UART_ID1); | |
829 | id2 = serial_icr_read(up, UART_ID2); | |
830 | id3 = serial_icr_read(up, UART_ID3); | |
831 | rev = serial_icr_read(up, UART_REV); | |
832 | ||
833 | DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev); | |
834 | ||
835 | if (id1 == 0x16 && id2 == 0xC9 && | |
836 | (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { | |
837 | up->port.type = PORT_16C950; | |
4ba5e35d RK |
838 | |
839 | /* | |
840 | * Enable work around for the Oxford Semiconductor 952 rev B | |
841 | * chip which causes it to seriously miscalculate baud rates | |
842 | * when DLL is 0. | |
843 | */ | |
844 | if (id3 == 0x52 && rev == 0x01) | |
845 | up->bugs |= UART_BUG_QUOT; | |
1da177e4 LT |
846 | return; |
847 | } | |
bd71c182 | 848 | |
1da177e4 LT |
849 | /* |
850 | * We check for a XR16C850 by setting DLL and DLM to 0, and then | |
851 | * reading back DLL and DLM. The chip type depends on the DLM | |
852 | * value read back: | |
853 | * 0x10 - XR16C850 and the DLL contains the chip revision. | |
854 | * 0x12 - XR16C2850. | |
855 | * 0x14 - XR16C854. | |
856 | */ | |
857 | id1 = autoconfig_read_divisor_id(up); | |
858 | DEBUG_AUTOCONF("850id=%04x ", id1); | |
859 | ||
860 | id2 = id1 >> 8; | |
861 | if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { | |
1da177e4 LT |
862 | up->port.type = PORT_16850; |
863 | return; | |
864 | } | |
865 | ||
866 | /* | |
867 | * It wasn't an XR16C850. | |
868 | * | |
869 | * We distinguish between the '654 and the '650 by counting | |
870 | * how many bytes are in the FIFO. I'm using this for now, | |
871 | * since that's the technique that was sent to me in the | |
872 | * serial driver update, but I'm not convinced this works. | |
873 | * I've had problems doing this in the past. -TYT | |
874 | */ | |
875 | if (size_fifo(up) == 64) | |
876 | up->port.type = PORT_16654; | |
877 | else | |
878 | up->port.type = PORT_16650V2; | |
879 | } | |
880 | ||
881 | /* | |
882 | * We detected a chip without a FIFO. Only two fall into | |
883 | * this category - the original 8250 and the 16450. The | |
884 | * 16450 has a scratch register (accessible with LCR=0) | |
885 | */ | |
886 | static void autoconfig_8250(struct uart_8250_port *up) | |
887 | { | |
888 | unsigned char scratch, status1, status2; | |
889 | ||
890 | up->port.type = PORT_8250; | |
891 | ||
892 | scratch = serial_in(up, UART_SCR); | |
893 | serial_outp(up, UART_SCR, 0xa5); | |
894 | status1 = serial_in(up, UART_SCR); | |
895 | serial_outp(up, UART_SCR, 0x5a); | |
896 | status2 = serial_in(up, UART_SCR); | |
897 | serial_outp(up, UART_SCR, scratch); | |
898 | ||
899 | if (status1 == 0xa5 && status2 == 0x5a) | |
900 | up->port.type = PORT_16450; | |
901 | } | |
902 | ||
903 | static int broken_efr(struct uart_8250_port *up) | |
904 | { | |
905 | /* | |
906 | * Exar ST16C2550 "A2" devices incorrectly detect as | |
907 | * having an EFR, and report an ID of 0x0201. See | |
908 | * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf | |
909 | */ | |
910 | if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) | |
911 | return 1; | |
912 | ||
913 | return 0; | |
914 | } | |
915 | ||
916 | /* | |
917 | * We know that the chip has FIFOs. Does it have an EFR? The | |
918 | * EFR is located in the same register position as the IIR and | |
919 | * we know the top two bits of the IIR are currently set. The | |
920 | * EFR should contain zero. Try to read the EFR. | |
921 | */ | |
922 | static void autoconfig_16550a(struct uart_8250_port *up) | |
923 | { | |
924 | unsigned char status1, status2; | |
925 | unsigned int iersave; | |
926 | ||
927 | up->port.type = PORT_16550A; | |
928 | up->capabilities |= UART_CAP_FIFO; | |
929 | ||
930 | /* | |
931 | * Check for presence of the EFR when DLAB is set. | |
932 | * Only ST16C650V1 UARTs pass this test. | |
933 | */ | |
934 | serial_outp(up, UART_LCR, UART_LCR_DLAB); | |
935 | if (serial_in(up, UART_EFR) == 0) { | |
936 | serial_outp(up, UART_EFR, 0xA8); | |
937 | if (serial_in(up, UART_EFR) != 0) { | |
938 | DEBUG_AUTOCONF("EFRv1 "); | |
939 | up->port.type = PORT_16650; | |
940 | up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; | |
941 | } else { | |
942 | DEBUG_AUTOCONF("Motorola 8xxx DUART "); | |
943 | } | |
944 | serial_outp(up, UART_EFR, 0); | |
945 | return; | |
946 | } | |
947 | ||
948 | /* | |
949 | * Maybe it requires 0xbf to be written to the LCR. | |
950 | * (other ST16C650V2 UARTs, TI16C752A, etc) | |
951 | */ | |
952 | serial_outp(up, UART_LCR, 0xBF); | |
953 | if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { | |
954 | DEBUG_AUTOCONF("EFRv2 "); | |
955 | autoconfig_has_efr(up); | |
956 | return; | |
957 | } | |
958 | ||
959 | /* | |
960 | * Check for a National Semiconductor SuperIO chip. | |
961 | * Attempt to switch to bank 2, read the value of the LOOP bit | |
962 | * from EXCR1. Switch back to bank 0, change it in MCR. Then | |
963 | * switch back to bank 2, read it from EXCR1 again and check | |
964 | * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 | |
1da177e4 LT |
965 | */ |
966 | serial_outp(up, UART_LCR, 0); | |
967 | status1 = serial_in(up, UART_MCR); | |
968 | serial_outp(up, UART_LCR, 0xE0); | |
969 | status2 = serial_in(up, 0x02); /* EXCR1 */ | |
970 | ||
971 | if (!((status2 ^ status1) & UART_MCR_LOOP)) { | |
972 | serial_outp(up, UART_LCR, 0); | |
973 | serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP); | |
974 | serial_outp(up, UART_LCR, 0xE0); | |
975 | status2 = serial_in(up, 0x02); /* EXCR1 */ | |
976 | serial_outp(up, UART_LCR, 0); | |
977 | serial_outp(up, UART_MCR, status1); | |
978 | ||
979 | if ((status2 ^ status1) & UART_MCR_LOOP) { | |
857dde2e DW |
980 | unsigned short quot; |
981 | ||
1da177e4 | 982 | serial_outp(up, UART_LCR, 0xE0); |
857dde2e | 983 | |
b32b19b8 | 984 | quot = serial_dl_read(up); |
857dde2e DW |
985 | quot <<= 3; |
986 | ||
b5b82df6 | 987 | status1 = serial_in(up, 0x04); /* EXCR2 */ |
1da177e4 LT |
988 | status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ |
989 | status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ | |
990 | serial_outp(up, 0x04, status1); | |
bd71c182 | 991 | |
b32b19b8 | 992 | serial_dl_write(up, quot); |
857dde2e | 993 | |
1da177e4 | 994 | serial_outp(up, UART_LCR, 0); |
1da177e4 | 995 | |
857dde2e | 996 | up->port.uartclk = 921600*16; |
1da177e4 LT |
997 | up->port.type = PORT_NS16550A; |
998 | up->capabilities |= UART_NATSEMI; | |
999 | return; | |
1000 | } | |
1001 | } | |
1002 | ||
1003 | /* | |
1004 | * No EFR. Try to detect a TI16750, which only sets bit 5 of | |
1005 | * the IIR when 64 byte FIFO mode is enabled when DLAB is set. | |
1006 | * Try setting it with and without DLAB set. Cheap clones | |
1007 | * set bit 5 without DLAB set. | |
1008 | */ | |
1009 | serial_outp(up, UART_LCR, 0); | |
1010 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); | |
1011 | status1 = serial_in(up, UART_IIR) >> 5; | |
1012 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
1013 | serial_outp(up, UART_LCR, UART_LCR_DLAB); | |
1014 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); | |
1015 | status2 = serial_in(up, UART_IIR) >> 5; | |
1016 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
1017 | serial_outp(up, UART_LCR, 0); | |
1018 | ||
1019 | DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); | |
1020 | ||
1021 | if (status1 == 6 && status2 == 7) { | |
1022 | up->port.type = PORT_16750; | |
1023 | up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP; | |
1024 | return; | |
1025 | } | |
1026 | ||
1027 | /* | |
1028 | * Try writing and reading the UART_IER_UUE bit (b6). | |
1029 | * If it works, this is probably one of the Xscale platform's | |
1030 | * internal UARTs. | |
1031 | * We're going to explicitly set the UUE bit to 0 before | |
1032 | * trying to write and read a 1 just to make sure it's not | |
1033 | * already a 1 and maybe locked there before we even start start. | |
1034 | */ | |
1035 | iersave = serial_in(up, UART_IER); | |
1036 | serial_outp(up, UART_IER, iersave & ~UART_IER_UUE); | |
1037 | if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { | |
1038 | /* | |
1039 | * OK it's in a known zero state, try writing and reading | |
1040 | * without disturbing the current state of the other bits. | |
1041 | */ | |
1042 | serial_outp(up, UART_IER, iersave | UART_IER_UUE); | |
1043 | if (serial_in(up, UART_IER) & UART_IER_UUE) { | |
1044 | /* | |
1045 | * It's an Xscale. | |
1046 | * We'll leave the UART_IER_UUE bit set to 1 (enabled). | |
1047 | */ | |
1048 | DEBUG_AUTOCONF("Xscale "); | |
1049 | up->port.type = PORT_XSCALE; | |
1050 | up->capabilities |= UART_CAP_UUE; | |
1051 | return; | |
1052 | } | |
1053 | } else { | |
1054 | /* | |
1055 | * If we got here we couldn't force the IER_UUE bit to 0. | |
1056 | * Log it and continue. | |
1057 | */ | |
1058 | DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); | |
1059 | } | |
1060 | serial_outp(up, UART_IER, iersave); | |
1061 | } | |
1062 | ||
1063 | /* | |
1064 | * This routine is called by rs_init() to initialize a specific serial | |
1065 | * port. It determines what type of UART chip this serial port is | |
1066 | * using: 8250, 16450, 16550, 16550A. The important question is | |
1067 | * whether or not this UART is a 16550A or not, since this will | |
1068 | * determine whether or not we can use its FIFO features or not. | |
1069 | */ | |
1070 | static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) | |
1071 | { | |
1072 | unsigned char status1, scratch, scratch2, scratch3; | |
1073 | unsigned char save_lcr, save_mcr; | |
1074 | unsigned long flags; | |
1075 | ||
1076 | if (!up->port.iobase && !up->port.mapbase && !up->port.membase) | |
1077 | return; | |
1078 | ||
1079 | DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ", | |
8440838b | 1080 | serial_index(&up->port), up->port.iobase, up->port.membase); |
1da177e4 LT |
1081 | |
1082 | /* | |
1083 | * We really do need global IRQs disabled here - we're going to | |
1084 | * be frobbing the chips IRQ enable register to see if it exists. | |
1085 | */ | |
1086 | spin_lock_irqsave(&up->port.lock, flags); | |
1da177e4 LT |
1087 | |
1088 | up->capabilities = 0; | |
4ba5e35d | 1089 | up->bugs = 0; |
1da177e4 LT |
1090 | |
1091 | if (!(up->port.flags & UPF_BUGGY_UART)) { | |
1092 | /* | |
1093 | * Do a simple existence test first; if we fail this, | |
1094 | * there's no point trying anything else. | |
bd71c182 | 1095 | * |
1da177e4 LT |
1096 | * 0x80 is used as a nonsense port to prevent against |
1097 | * false positives due to ISA bus float. The | |
1098 | * assumption is that 0x80 is a non-existent port; | |
1099 | * which should be safe since include/asm/io.h also | |
1100 | * makes this assumption. | |
1101 | * | |
1102 | * Note: this is safe as long as MCR bit 4 is clear | |
1103 | * and the device is in "PC" mode. | |
1104 | */ | |
1105 | scratch = serial_inp(up, UART_IER); | |
1106 | serial_outp(up, UART_IER, 0); | |
1107 | #ifdef __i386__ | |
1108 | outb(0xff, 0x080); | |
1109 | #endif | |
48212008 TH |
1110 | /* |
1111 | * Mask out IER[7:4] bits for test as some UARTs (e.g. TL | |
1112 | * 16C754B) allow only to modify them if an EFR bit is set. | |
1113 | */ | |
1114 | scratch2 = serial_inp(up, UART_IER) & 0x0f; | |
1da177e4 LT |
1115 | serial_outp(up, UART_IER, 0x0F); |
1116 | #ifdef __i386__ | |
1117 | outb(0, 0x080); | |
1118 | #endif | |
48212008 | 1119 | scratch3 = serial_inp(up, UART_IER) & 0x0f; |
1da177e4 LT |
1120 | serial_outp(up, UART_IER, scratch); |
1121 | if (scratch2 != 0 || scratch3 != 0x0F) { | |
1122 | /* | |
1123 | * We failed; there's nothing here | |
1124 | */ | |
1125 | DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", | |
1126 | scratch2, scratch3); | |
1127 | goto out; | |
1128 | } | |
1129 | } | |
1130 | ||
1131 | save_mcr = serial_in(up, UART_MCR); | |
1132 | save_lcr = serial_in(up, UART_LCR); | |
1133 | ||
bd71c182 | 1134 | /* |
1da177e4 LT |
1135 | * Check to see if a UART is really there. Certain broken |
1136 | * internal modems based on the Rockwell chipset fail this | |
1137 | * test, because they apparently don't implement the loopback | |
1138 | * test mode. So this test is skipped on the COM 1 through | |
1139 | * COM 4 ports. This *should* be safe, since no board | |
1140 | * manufacturer would be stupid enough to design a board | |
1141 | * that conflicts with COM 1-4 --- we hope! | |
1142 | */ | |
1143 | if (!(up->port.flags & UPF_SKIP_TEST)) { | |
1144 | serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); | |
1145 | status1 = serial_inp(up, UART_MSR) & 0xF0; | |
1146 | serial_outp(up, UART_MCR, save_mcr); | |
1147 | if (status1 != 0x90) { | |
1148 | DEBUG_AUTOCONF("LOOP test failed (%02x) ", | |
1149 | status1); | |
1150 | goto out; | |
1151 | } | |
1152 | } | |
1153 | ||
1154 | /* | |
1155 | * We're pretty sure there's a port here. Lets find out what | |
1156 | * type of port it is. The IIR top two bits allows us to find | |
6f0d618f | 1157 | * out if it's 8250 or 16450, 16550, 16550A or later. This |
1da177e4 LT |
1158 | * determines what we test for next. |
1159 | * | |
1160 | * We also initialise the EFR (if any) to zero for later. The | |
1161 | * EFR occupies the same register location as the FCR and IIR. | |
1162 | */ | |
1163 | serial_outp(up, UART_LCR, 0xBF); | |
1164 | serial_outp(up, UART_EFR, 0); | |
1165 | serial_outp(up, UART_LCR, 0); | |
1166 | ||
1167 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
1168 | scratch = serial_in(up, UART_IIR) >> 6; | |
1169 | ||
1170 | DEBUG_AUTOCONF("iir=%d ", scratch); | |
1171 | ||
1172 | switch (scratch) { | |
1173 | case 0: | |
1174 | autoconfig_8250(up); | |
1175 | break; | |
1176 | case 1: | |
1177 | up->port.type = PORT_UNKNOWN; | |
1178 | break; | |
1179 | case 2: | |
1180 | up->port.type = PORT_16550; | |
1181 | break; | |
1182 | case 3: | |
1183 | autoconfig_16550a(up); | |
1184 | break; | |
1185 | } | |
1186 | ||
1187 | #ifdef CONFIG_SERIAL_8250_RSA | |
1188 | /* | |
1189 | * Only probe for RSA ports if we got the region. | |
1190 | */ | |
1191 | if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) { | |
1192 | int i; | |
1193 | ||
1194 | for (i = 0 ; i < probe_rsa_count; ++i) { | |
1195 | if (probe_rsa[i] == up->port.iobase && | |
1196 | __enable_rsa(up)) { | |
1197 | up->port.type = PORT_RSA; | |
1198 | break; | |
1199 | } | |
1200 | } | |
1201 | } | |
1202 | #endif | |
21c614a7 PA |
1203 | |
1204 | #ifdef CONFIG_SERIAL_8250_AU1X00 | |
1205 | /* if access method is AU, it is a 16550 with a quirk */ | |
1206 | if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) | |
1207 | up->bugs |= UART_BUG_NOMSR; | |
1208 | #endif | |
1209 | ||
1da177e4 LT |
1210 | serial_outp(up, UART_LCR, save_lcr); |
1211 | ||
1212 | if (up->capabilities != uart_config[up->port.type].flags) { | |
1213 | printk(KERN_WARNING | |
1214 | "ttyS%d: detected caps %08x should be %08x\n", | |
8440838b DM |
1215 | serial_index(&up->port), up->capabilities, |
1216 | uart_config[up->port.type].flags); | |
1da177e4 LT |
1217 | } |
1218 | ||
1219 | up->port.fifosize = uart_config[up->port.type].fifo_size; | |
1220 | up->capabilities = uart_config[up->port.type].flags; | |
1221 | up->tx_loadsz = uart_config[up->port.type].tx_loadsz; | |
1222 | ||
1223 | if (up->port.type == PORT_UNKNOWN) | |
1224 | goto out; | |
1225 | ||
1226 | /* | |
1227 | * Reset the UART. | |
1228 | */ | |
1229 | #ifdef CONFIG_SERIAL_8250_RSA | |
1230 | if (up->port.type == PORT_RSA) | |
1231 | serial_outp(up, UART_RSA_FRR, 0); | |
1232 | #endif | |
1233 | serial_outp(up, UART_MCR, save_mcr); | |
1234 | serial8250_clear_fifos(up); | |
40b36daa | 1235 | serial_in(up, UART_RX); |
5c8c755c LB |
1236 | if (up->capabilities & UART_CAP_UUE) |
1237 | serial_outp(up, UART_IER, UART_IER_UUE); | |
1238 | else | |
1239 | serial_outp(up, UART_IER, 0); | |
1da177e4 | 1240 | |
bd71c182 | 1241 | out: |
1da177e4 | 1242 | spin_unlock_irqrestore(&up->port.lock, flags); |
1da177e4 LT |
1243 | DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); |
1244 | } | |
1245 | ||
1246 | static void autoconfig_irq(struct uart_8250_port *up) | |
1247 | { | |
1248 | unsigned char save_mcr, save_ier; | |
1249 | unsigned char save_ICP = 0; | |
1250 | unsigned int ICP = 0; | |
1251 | unsigned long irqs; | |
1252 | int irq; | |
1253 | ||
1254 | if (up->port.flags & UPF_FOURPORT) { | |
1255 | ICP = (up->port.iobase & 0xfe0) | 0x1f; | |
1256 | save_ICP = inb_p(ICP); | |
1257 | outb_p(0x80, ICP); | |
1258 | (void) inb_p(ICP); | |
1259 | } | |
1260 | ||
1261 | /* forget possible initially masked and pending IRQ */ | |
1262 | probe_irq_off(probe_irq_on()); | |
1263 | save_mcr = serial_inp(up, UART_MCR); | |
1264 | save_ier = serial_inp(up, UART_IER); | |
1265 | serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); | |
bd71c182 | 1266 | |
1da177e4 LT |
1267 | irqs = probe_irq_on(); |
1268 | serial_outp(up, UART_MCR, 0); | |
6f803cd0 AC |
1269 | udelay(10); |
1270 | if (up->port.flags & UPF_FOURPORT) { | |
1da177e4 LT |
1271 | serial_outp(up, UART_MCR, |
1272 | UART_MCR_DTR | UART_MCR_RTS); | |
1273 | } else { | |
1274 | serial_outp(up, UART_MCR, | |
1275 | UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); | |
1276 | } | |
1277 | serial_outp(up, UART_IER, 0x0f); /* enable all intrs */ | |
1278 | (void)serial_inp(up, UART_LSR); | |
1279 | (void)serial_inp(up, UART_RX); | |
1280 | (void)serial_inp(up, UART_IIR); | |
1281 | (void)serial_inp(up, UART_MSR); | |
1282 | serial_outp(up, UART_TX, 0xFF); | |
6f803cd0 | 1283 | udelay(20); |
1da177e4 LT |
1284 | irq = probe_irq_off(irqs); |
1285 | ||
1286 | serial_outp(up, UART_MCR, save_mcr); | |
1287 | serial_outp(up, UART_IER, save_ier); | |
1288 | ||
1289 | if (up->port.flags & UPF_FOURPORT) | |
1290 | outb_p(save_ICP, ICP); | |
1291 | ||
1292 | up->port.irq = (irq > 0) ? irq : 0; | |
1293 | } | |
1294 | ||
e763b90c RK |
1295 | static inline void __stop_tx(struct uart_8250_port *p) |
1296 | { | |
1297 | if (p->ier & UART_IER_THRI) { | |
1298 | p->ier &= ~UART_IER_THRI; | |
1299 | serial_out(p, UART_IER, p->ier); | |
1300 | } | |
1301 | } | |
1302 | ||
b129a8cc | 1303 | static void serial8250_stop_tx(struct uart_port *port) |
1da177e4 LT |
1304 | { |
1305 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1306 | ||
e763b90c | 1307 | __stop_tx(up); |
1da177e4 LT |
1308 | |
1309 | /* | |
e763b90c | 1310 | * We really want to stop the transmitter from sending. |
1da177e4 | 1311 | */ |
e763b90c | 1312 | if (up->port.type == PORT_16C950) { |
1da177e4 LT |
1313 | up->acr |= UART_ACR_TXDIS; |
1314 | serial_icr_write(up, UART_ACR, up->acr); | |
1315 | } | |
1316 | } | |
1317 | ||
55d3b282 RK |
1318 | static void transmit_chars(struct uart_8250_port *up); |
1319 | ||
b129a8cc | 1320 | static void serial8250_start_tx(struct uart_port *port) |
1da177e4 LT |
1321 | { |
1322 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1323 | ||
1324 | if (!(up->ier & UART_IER_THRI)) { | |
1325 | up->ier |= UART_IER_THRI; | |
1326 | serial_out(up, UART_IER, up->ier); | |
55d3b282 | 1327 | |
67f7654e | 1328 | if (up->bugs & UART_BUG_TXEN) { |
55d3b282 RK |
1329 | unsigned char lsr, iir; |
1330 | lsr = serial_in(up, UART_LSR); | |
ad4c2aa6 | 1331 | up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; |
bd71c182 TK |
1332 | iir = serial_in(up, UART_IIR) & 0x0f; |
1333 | if ((up->port.type == PORT_RM9000) ? | |
1334 | (lsr & UART_LSR_THRE && | |
1335 | (iir == UART_IIR_NO_INT || iir == UART_IIR_THRI)) : | |
1336 | (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT)) | |
55d3b282 RK |
1337 | transmit_chars(up); |
1338 | } | |
1da177e4 | 1339 | } |
e763b90c | 1340 | |
1da177e4 | 1341 | /* |
e763b90c | 1342 | * Re-enable the transmitter if we disabled it. |
1da177e4 | 1343 | */ |
e763b90c | 1344 | if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { |
1da177e4 LT |
1345 | up->acr &= ~UART_ACR_TXDIS; |
1346 | serial_icr_write(up, UART_ACR, up->acr); | |
1347 | } | |
1348 | } | |
1349 | ||
1350 | static void serial8250_stop_rx(struct uart_port *port) | |
1351 | { | |
1352 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1353 | ||
1354 | up->ier &= ~UART_IER_RLSI; | |
1355 | up->port.read_status_mask &= ~UART_LSR_DR; | |
1356 | serial_out(up, UART_IER, up->ier); | |
1357 | } | |
1358 | ||
1359 | static void serial8250_enable_ms(struct uart_port *port) | |
1360 | { | |
1361 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1362 | ||
21c614a7 PA |
1363 | /* no MSR capabilities */ |
1364 | if (up->bugs & UART_BUG_NOMSR) | |
1365 | return; | |
1366 | ||
1da177e4 LT |
1367 | up->ier |= UART_IER_MSI; |
1368 | serial_out(up, UART_IER, up->ier); | |
1369 | } | |
1370 | ||
ea8874dc | 1371 | static void |
cc79aa9d | 1372 | receive_chars(struct uart_8250_port *up, unsigned int *status) |
1da177e4 | 1373 | { |
df4f4dd4 | 1374 | struct tty_struct *tty = up->port.info->port.tty; |
1da177e4 LT |
1375 | unsigned char ch, lsr = *status; |
1376 | int max_count = 256; | |
1377 | char flag; | |
1378 | ||
1379 | do { | |
7500b1f6 AR |
1380 | if (likely(lsr & UART_LSR_DR)) |
1381 | ch = serial_inp(up, UART_RX); | |
1382 | else | |
1383 | /* | |
1384 | * Intel 82571 has a Serial Over Lan device that will | |
1385 | * set UART_LSR_BI without setting UART_LSR_DR when | |
1386 | * it receives a break. To avoid reading from the | |
1387 | * receive buffer without UART_LSR_DR bit set, we | |
1388 | * just force the read character to be 0 | |
1389 | */ | |
1390 | ch = 0; | |
1391 | ||
1da177e4 LT |
1392 | flag = TTY_NORMAL; |
1393 | up->port.icount.rx++; | |
1394 | ||
ad4c2aa6 CM |
1395 | lsr |= up->lsr_saved_flags; |
1396 | up->lsr_saved_flags = 0; | |
1da177e4 | 1397 | |
ad4c2aa6 | 1398 | if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { |
1da177e4 LT |
1399 | /* |
1400 | * For statistics only | |
1401 | */ | |
1402 | if (lsr & UART_LSR_BI) { | |
1403 | lsr &= ~(UART_LSR_FE | UART_LSR_PE); | |
1404 | up->port.icount.brk++; | |
1405 | /* | |
1406 | * We do the SysRQ and SAK checking | |
1407 | * here because otherwise the break | |
1408 | * may get masked by ignore_status_mask | |
1409 | * or read_status_mask. | |
1410 | */ | |
1411 | if (uart_handle_break(&up->port)) | |
1412 | goto ignore_char; | |
1413 | } else if (lsr & UART_LSR_PE) | |
1414 | up->port.icount.parity++; | |
1415 | else if (lsr & UART_LSR_FE) | |
1416 | up->port.icount.frame++; | |
1417 | if (lsr & UART_LSR_OE) | |
1418 | up->port.icount.overrun++; | |
1419 | ||
1420 | /* | |
23907eb8 | 1421 | * Mask off conditions which should be ignored. |
1da177e4 LT |
1422 | */ |
1423 | lsr &= up->port.read_status_mask; | |
1424 | ||
1425 | if (lsr & UART_LSR_BI) { | |
1426 | DEBUG_INTR("handling break...."); | |
1427 | flag = TTY_BREAK; | |
1428 | } else if (lsr & UART_LSR_PE) | |
1429 | flag = TTY_PARITY; | |
1430 | else if (lsr & UART_LSR_FE) | |
1431 | flag = TTY_FRAME; | |
1432 | } | |
7d12e780 | 1433 | if (uart_handle_sysrq_char(&up->port, ch)) |
1da177e4 | 1434 | goto ignore_char; |
05ab3014 RK |
1435 | |
1436 | uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); | |
1437 | ||
6f803cd0 | 1438 | ignore_char: |
1da177e4 | 1439 | lsr = serial_inp(up, UART_LSR); |
7500b1f6 | 1440 | } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); |
1da177e4 LT |
1441 | spin_unlock(&up->port.lock); |
1442 | tty_flip_buffer_push(tty); | |
1443 | spin_lock(&up->port.lock); | |
1444 | *status = lsr; | |
1445 | } | |
1446 | ||
ea8874dc | 1447 | static void transmit_chars(struct uart_8250_port *up) |
1da177e4 LT |
1448 | { |
1449 | struct circ_buf *xmit = &up->port.info->xmit; | |
1450 | int count; | |
1451 | ||
1452 | if (up->port.x_char) { | |
1453 | serial_outp(up, UART_TX, up->port.x_char); | |
1454 | up->port.icount.tx++; | |
1455 | up->port.x_char = 0; | |
1456 | return; | |
1457 | } | |
b129a8cc RK |
1458 | if (uart_tx_stopped(&up->port)) { |
1459 | serial8250_stop_tx(&up->port); | |
1460 | return; | |
1461 | } | |
1462 | if (uart_circ_empty(xmit)) { | |
e763b90c | 1463 | __stop_tx(up); |
1da177e4 LT |
1464 | return; |
1465 | } | |
1466 | ||
1467 | count = up->tx_loadsz; | |
1468 | do { | |
1469 | serial_out(up, UART_TX, xmit->buf[xmit->tail]); | |
1470 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
1471 | up->port.icount.tx++; | |
1472 | if (uart_circ_empty(xmit)) | |
1473 | break; | |
1474 | } while (--count > 0); | |
1475 | ||
1476 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
1477 | uart_write_wakeup(&up->port); | |
1478 | ||
1479 | DEBUG_INTR("THRE..."); | |
1480 | ||
1481 | if (uart_circ_empty(xmit)) | |
e763b90c | 1482 | __stop_tx(up); |
1da177e4 LT |
1483 | } |
1484 | ||
2af7cd68 | 1485 | static unsigned int check_modem_status(struct uart_8250_port *up) |
1da177e4 | 1486 | { |
2af7cd68 RK |
1487 | unsigned int status = serial_in(up, UART_MSR); |
1488 | ||
ad4c2aa6 CM |
1489 | status |= up->msr_saved_flags; |
1490 | up->msr_saved_flags = 0; | |
fdc30b3d TI |
1491 | if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && |
1492 | up->port.info != NULL) { | |
2af7cd68 RK |
1493 | if (status & UART_MSR_TERI) |
1494 | up->port.icount.rng++; | |
1495 | if (status & UART_MSR_DDSR) | |
1496 | up->port.icount.dsr++; | |
1497 | if (status & UART_MSR_DDCD) | |
1498 | uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); | |
1499 | if (status & UART_MSR_DCTS) | |
1500 | uart_handle_cts_change(&up->port, status & UART_MSR_CTS); | |
1501 | ||
1502 | wake_up_interruptible(&up->port.info->delta_msr_wait); | |
1503 | } | |
1da177e4 | 1504 | |
2af7cd68 | 1505 | return status; |
1da177e4 LT |
1506 | } |
1507 | ||
1508 | /* | |
1509 | * This handles the interrupt from one port. | |
1510 | */ | |
b5d674ab | 1511 | static void serial8250_handle_port(struct uart_8250_port *up) |
1da177e4 | 1512 | { |
45e24601 | 1513 | unsigned int status; |
4bf3631c | 1514 | unsigned long flags; |
45e24601 | 1515 | |
4bf3631c | 1516 | spin_lock_irqsave(&up->port.lock, flags); |
45e24601 RK |
1517 | |
1518 | status = serial_inp(up, UART_LSR); | |
1da177e4 LT |
1519 | |
1520 | DEBUG_INTR("status = %x...", status); | |
1521 | ||
7500b1f6 | 1522 | if (status & (UART_LSR_DR | UART_LSR_BI)) |
7d12e780 | 1523 | receive_chars(up, &status); |
1da177e4 LT |
1524 | check_modem_status(up); |
1525 | if (status & UART_LSR_THRE) | |
1526 | transmit_chars(up); | |
45e24601 | 1527 | |
4bf3631c | 1528 | spin_unlock_irqrestore(&up->port.lock, flags); |
1da177e4 LT |
1529 | } |
1530 | ||
1531 | /* | |
1532 | * This is the serial driver's interrupt routine. | |
1533 | * | |
1534 | * Arjan thinks the old way was overly complex, so it got simplified. | |
1535 | * Alan disagrees, saying that need the complexity to handle the weird | |
1536 | * nature of ISA shared interrupts. (This is a special exception.) | |
1537 | * | |
1538 | * In order to handle ISA shared interrupts properly, we need to check | |
1539 | * that all ports have been serviced, and therefore the ISA interrupt | |
1540 | * line has been de-asserted. | |
1541 | * | |
1542 | * This means we need to loop through all ports. checking that they | |
1543 | * don't have an interrupt pending. | |
1544 | */ | |
7d12e780 | 1545 | static irqreturn_t serial8250_interrupt(int irq, void *dev_id) |
1da177e4 LT |
1546 | { |
1547 | struct irq_info *i = dev_id; | |
1548 | struct list_head *l, *end = NULL; | |
1549 | int pass_counter = 0, handled = 0; | |
1550 | ||
1551 | DEBUG_INTR("serial8250_interrupt(%d)...", irq); | |
1552 | ||
1553 | spin_lock(&i->lock); | |
1554 | ||
1555 | l = i->head; | |
1556 | do { | |
1557 | struct uart_8250_port *up; | |
1558 | unsigned int iir; | |
1559 | ||
1560 | up = list_entry(l, struct uart_8250_port, list); | |
1561 | ||
1562 | iir = serial_in(up, UART_IIR); | |
1563 | if (!(iir & UART_IIR_NO_INT)) { | |
7d12e780 | 1564 | serial8250_handle_port(up); |
1da177e4 LT |
1565 | |
1566 | handled = 1; | |
1567 | ||
beab697a MSJ |
1568 | end = NULL; |
1569 | } else if (up->port.iotype == UPIO_DWAPB && | |
1570 | (iir & UART_IIR_BUSY) == UART_IIR_BUSY) { | |
1571 | /* The DesignWare APB UART has an Busy Detect (0x07) | |
1572 | * interrupt meaning an LCR write attempt occured while the | |
1573 | * UART was busy. The interrupt must be cleared by reading | |
1574 | * the UART status register (USR) and the LCR re-written. */ | |
1575 | unsigned int status; | |
1576 | status = *(volatile u32 *)up->port.private_data; | |
1577 | serial_out(up, UART_LCR, up->lcr); | |
1578 | ||
1579 | handled = 1; | |
1580 | ||
1da177e4 LT |
1581 | end = NULL; |
1582 | } else if (end == NULL) | |
1583 | end = l; | |
1584 | ||
1585 | l = l->next; | |
1586 | ||
1587 | if (l == i->head && pass_counter++ > PASS_LIMIT) { | |
1588 | /* If we hit this, we're dead. */ | |
1589 | printk(KERN_ERR "serial8250: too much work for " | |
1590 | "irq%d\n", irq); | |
1591 | break; | |
1592 | } | |
1593 | } while (l != end); | |
1594 | ||
1595 | spin_unlock(&i->lock); | |
1596 | ||
1597 | DEBUG_INTR("end.\n"); | |
1598 | ||
1599 | return IRQ_RETVAL(handled); | |
1600 | } | |
1601 | ||
1602 | /* | |
1603 | * To support ISA shared interrupts, we need to have one interrupt | |
1604 | * handler that ensures that the IRQ line has been deasserted | |
1605 | * before returning. Failing to do this will result in the IRQ | |
1606 | * line being stuck active, and, since ISA irqs are edge triggered, | |
1607 | * no more IRQs will be seen. | |
1608 | */ | |
1609 | static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) | |
1610 | { | |
1611 | spin_lock_irq(&i->lock); | |
1612 | ||
1613 | if (!list_empty(i->head)) { | |
1614 | if (i->head == &up->list) | |
1615 | i->head = i->head->next; | |
1616 | list_del(&up->list); | |
1617 | } else { | |
1618 | BUG_ON(i->head != &up->list); | |
1619 | i->head = NULL; | |
1620 | } | |
1da177e4 | 1621 | spin_unlock_irq(&i->lock); |
25db8ad5 AC |
1622 | /* List empty so throw away the hash node */ |
1623 | if (i->head == NULL) { | |
1624 | hlist_del(&i->node); | |
1625 | kfree(i); | |
1626 | } | |
1da177e4 LT |
1627 | } |
1628 | ||
1629 | static int serial_link_irq_chain(struct uart_8250_port *up) | |
1630 | { | |
25db8ad5 AC |
1631 | struct hlist_head *h; |
1632 | struct hlist_node *n; | |
1633 | struct irq_info *i; | |
40663cc7 | 1634 | int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; |
1da177e4 | 1635 | |
25db8ad5 AC |
1636 | mutex_lock(&hash_mutex); |
1637 | ||
1638 | h = &irq_lists[up->port.irq % NR_IRQ_HASH]; | |
1639 | ||
1640 | hlist_for_each(n, h) { | |
1641 | i = hlist_entry(n, struct irq_info, node); | |
1642 | if (i->irq == up->port.irq) | |
1643 | break; | |
1644 | } | |
1645 | ||
1646 | if (n == NULL) { | |
1647 | i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); | |
1648 | if (i == NULL) { | |
1649 | mutex_unlock(&hash_mutex); | |
1650 | return -ENOMEM; | |
1651 | } | |
1652 | spin_lock_init(&i->lock); | |
1653 | i->irq = up->port.irq; | |
1654 | hlist_add_head(&i->node, h); | |
1655 | } | |
1656 | mutex_unlock(&hash_mutex); | |
1657 | ||
1da177e4 LT |
1658 | spin_lock_irq(&i->lock); |
1659 | ||
1660 | if (i->head) { | |
1661 | list_add(&up->list, i->head); | |
1662 | spin_unlock_irq(&i->lock); | |
1663 | ||
1664 | ret = 0; | |
1665 | } else { | |
1666 | INIT_LIST_HEAD(&up->list); | |
1667 | i->head = &up->list; | |
1668 | spin_unlock_irq(&i->lock); | |
1669 | ||
1670 | ret = request_irq(up->port.irq, serial8250_interrupt, | |
1671 | irq_flags, "serial", i); | |
1672 | if (ret < 0) | |
1673 | serial_do_unlink(i, up); | |
1674 | } | |
1675 | ||
1676 | return ret; | |
1677 | } | |
1678 | ||
1679 | static void serial_unlink_irq_chain(struct uart_8250_port *up) | |
1680 | { | |
25db8ad5 AC |
1681 | struct irq_info *i; |
1682 | struct hlist_node *n; | |
1683 | struct hlist_head *h; | |
1da177e4 | 1684 | |
25db8ad5 AC |
1685 | mutex_lock(&hash_mutex); |
1686 | ||
1687 | h = &irq_lists[up->port.irq % NR_IRQ_HASH]; | |
1688 | ||
1689 | hlist_for_each(n, h) { | |
1690 | i = hlist_entry(n, struct irq_info, node); | |
1691 | if (i->irq == up->port.irq) | |
1692 | break; | |
1693 | } | |
1694 | ||
1695 | BUG_ON(n == NULL); | |
1da177e4 LT |
1696 | BUG_ON(i->head == NULL); |
1697 | ||
1698 | if (list_empty(i->head)) | |
1699 | free_irq(up->port.irq, i); | |
1700 | ||
1701 | serial_do_unlink(i, up); | |
25db8ad5 | 1702 | mutex_unlock(&hash_mutex); |
1da177e4 LT |
1703 | } |
1704 | ||
40b36daa AW |
1705 | /* Base timer interval for polling */ |
1706 | static inline int poll_timeout(int timeout) | |
1707 | { | |
1708 | return timeout > 6 ? (timeout / 2 - 2) : 1; | |
1709 | } | |
1710 | ||
1da177e4 LT |
1711 | /* |
1712 | * This function is used to handle ports that do not have an | |
1713 | * interrupt. This doesn't work very well for 16450's, but gives | |
1714 | * barely passable results for a 16550A. (Although at the expense | |
1715 | * of much CPU overhead). | |
1716 | */ | |
1717 | static void serial8250_timeout(unsigned long data) | |
1718 | { | |
1719 | struct uart_8250_port *up = (struct uart_8250_port *)data; | |
1da177e4 LT |
1720 | unsigned int iir; |
1721 | ||
1722 | iir = serial_in(up, UART_IIR); | |
45e24601 | 1723 | if (!(iir & UART_IIR_NO_INT)) |
7d12e780 | 1724 | serial8250_handle_port(up); |
40b36daa AW |
1725 | mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout)); |
1726 | } | |
1727 | ||
1728 | static void serial8250_backup_timeout(unsigned long data) | |
1729 | { | |
1730 | struct uart_8250_port *up = (struct uart_8250_port *)data; | |
ad4c2aa6 CM |
1731 | unsigned int iir, ier = 0, lsr; |
1732 | unsigned long flags; | |
40b36daa AW |
1733 | |
1734 | /* | |
1735 | * Must disable interrupts or else we risk racing with the interrupt | |
1736 | * based handler. | |
1737 | */ | |
1738 | if (is_real_interrupt(up->port.irq)) { | |
1739 | ier = serial_in(up, UART_IER); | |
1740 | serial_out(up, UART_IER, 0); | |
1741 | } | |
1da177e4 | 1742 | |
40b36daa AW |
1743 | iir = serial_in(up, UART_IIR); |
1744 | ||
1745 | /* | |
1746 | * This should be a safe test for anyone who doesn't trust the | |
1747 | * IIR bits on their UART, but it's specifically designed for | |
1748 | * the "Diva" UART used on the management processor on many HP | |
1749 | * ia64 and parisc boxes. | |
1750 | */ | |
ad4c2aa6 CM |
1751 | spin_lock_irqsave(&up->port.lock, flags); |
1752 | lsr = serial_in(up, UART_LSR); | |
1753 | up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; | |
1754 | spin_unlock_irqrestore(&up->port.lock, flags); | |
40b36daa AW |
1755 | if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && |
1756 | (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) && | |
ad4c2aa6 | 1757 | (lsr & UART_LSR_THRE)) { |
40b36daa AW |
1758 | iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); |
1759 | iir |= UART_IIR_THRI; | |
1760 | } | |
1761 | ||
1762 | if (!(iir & UART_IIR_NO_INT)) | |
1763 | serial8250_handle_port(up); | |
1764 | ||
1765 | if (is_real_interrupt(up->port.irq)) | |
1766 | serial_out(up, UART_IER, ier); | |
1767 | ||
1768 | /* Standard timer interval plus 0.2s to keep the port running */ | |
6f803cd0 AC |
1769 | mod_timer(&up->timer, |
1770 | jiffies + poll_timeout(up->port.timeout) + HZ / 5); | |
1da177e4 LT |
1771 | } |
1772 | ||
1773 | static unsigned int serial8250_tx_empty(struct uart_port *port) | |
1774 | { | |
1775 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1776 | unsigned long flags; | |
ad4c2aa6 | 1777 | unsigned int lsr; |
1da177e4 LT |
1778 | |
1779 | spin_lock_irqsave(&up->port.lock, flags); | |
ad4c2aa6 CM |
1780 | lsr = serial_in(up, UART_LSR); |
1781 | up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; | |
1da177e4 LT |
1782 | spin_unlock_irqrestore(&up->port.lock, flags); |
1783 | ||
ad4c2aa6 | 1784 | return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0; |
1da177e4 LT |
1785 | } |
1786 | ||
1787 | static unsigned int serial8250_get_mctrl(struct uart_port *port) | |
1788 | { | |
1789 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2af7cd68 | 1790 | unsigned int status; |
1da177e4 LT |
1791 | unsigned int ret; |
1792 | ||
2af7cd68 | 1793 | status = check_modem_status(up); |
1da177e4 LT |
1794 | |
1795 | ret = 0; | |
1796 | if (status & UART_MSR_DCD) | |
1797 | ret |= TIOCM_CAR; | |
1798 | if (status & UART_MSR_RI) | |
1799 | ret |= TIOCM_RNG; | |
1800 | if (status & UART_MSR_DSR) | |
1801 | ret |= TIOCM_DSR; | |
1802 | if (status & UART_MSR_CTS) | |
1803 | ret |= TIOCM_CTS; | |
1804 | return ret; | |
1805 | } | |
1806 | ||
1807 | static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
1808 | { | |
1809 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1810 | unsigned char mcr = 0; | |
1811 | ||
1812 | if (mctrl & TIOCM_RTS) | |
1813 | mcr |= UART_MCR_RTS; | |
1814 | if (mctrl & TIOCM_DTR) | |
1815 | mcr |= UART_MCR_DTR; | |
1816 | if (mctrl & TIOCM_OUT1) | |
1817 | mcr |= UART_MCR_OUT1; | |
1818 | if (mctrl & TIOCM_OUT2) | |
1819 | mcr |= UART_MCR_OUT2; | |
1820 | if (mctrl & TIOCM_LOOP) | |
1821 | mcr |= UART_MCR_LOOP; | |
1822 | ||
1823 | mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; | |
1824 | ||
1825 | serial_out(up, UART_MCR, mcr); | |
1826 | } | |
1827 | ||
1828 | static void serial8250_break_ctl(struct uart_port *port, int break_state) | |
1829 | { | |
1830 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1831 | unsigned long flags; | |
1832 | ||
1833 | spin_lock_irqsave(&up->port.lock, flags); | |
1834 | if (break_state == -1) | |
1835 | up->lcr |= UART_LCR_SBC; | |
1836 | else | |
1837 | up->lcr &= ~UART_LCR_SBC; | |
1838 | serial_out(up, UART_LCR, up->lcr); | |
1839 | spin_unlock_irqrestore(&up->port.lock, flags); | |
1840 | } | |
1841 | ||
40b36daa AW |
1842 | #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) |
1843 | ||
1844 | /* | |
1845 | * Wait for transmitter & holding register to empty | |
1846 | */ | |
b5d674ab | 1847 | static void wait_for_xmitr(struct uart_8250_port *up, int bits) |
40b36daa AW |
1848 | { |
1849 | unsigned int status, tmout = 10000; | |
1850 | ||
1851 | /* Wait up to 10ms for the character(s) to be sent. */ | |
1852 | do { | |
1853 | status = serial_in(up, UART_LSR); | |
1854 | ||
ad4c2aa6 | 1855 | up->lsr_saved_flags |= status & LSR_SAVE_FLAGS; |
40b36daa AW |
1856 | |
1857 | if (--tmout == 0) | |
1858 | break; | |
1859 | udelay(1); | |
1860 | } while ((status & bits) != bits); | |
1861 | ||
1862 | /* Wait up to 1s for flow control if necessary */ | |
1863 | if (up->port.flags & UPF_CONS_FLOW) { | |
ad4c2aa6 CM |
1864 | unsigned int tmout; |
1865 | for (tmout = 1000000; tmout; tmout--) { | |
1866 | unsigned int msr = serial_in(up, UART_MSR); | |
1867 | up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; | |
1868 | if (msr & UART_MSR_CTS) | |
1869 | break; | |
40b36daa AW |
1870 | udelay(1); |
1871 | touch_nmi_watchdog(); | |
1872 | } | |
1873 | } | |
1874 | } | |
1875 | ||
f2d937f3 JW |
1876 | #ifdef CONFIG_CONSOLE_POLL |
1877 | /* | |
1878 | * Console polling routines for writing and reading from the uart while | |
1879 | * in an interrupt or debug context. | |
1880 | */ | |
1881 | ||
1882 | static int serial8250_get_poll_char(struct uart_port *port) | |
1883 | { | |
1884 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1885 | unsigned char lsr = serial_inp(up, UART_LSR); | |
1886 | ||
1887 | while (!(lsr & UART_LSR_DR)) | |
1888 | lsr = serial_inp(up, UART_LSR); | |
1889 | ||
1890 | return serial_inp(up, UART_RX); | |
1891 | } | |
1892 | ||
1893 | ||
1894 | static void serial8250_put_poll_char(struct uart_port *port, | |
1895 | unsigned char c) | |
1896 | { | |
1897 | unsigned int ier; | |
1898 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1899 | ||
1900 | /* | |
1901 | * First save the IER then disable the interrupts | |
1902 | */ | |
1903 | ier = serial_in(up, UART_IER); | |
1904 | if (up->capabilities & UART_CAP_UUE) | |
1905 | serial_out(up, UART_IER, UART_IER_UUE); | |
1906 | else | |
1907 | serial_out(up, UART_IER, 0); | |
1908 | ||
1909 | wait_for_xmitr(up, BOTH_EMPTY); | |
1910 | /* | |
1911 | * Send the character out. | |
1912 | * If a LF, also do CR... | |
1913 | */ | |
1914 | serial_out(up, UART_TX, c); | |
1915 | if (c == 10) { | |
1916 | wait_for_xmitr(up, BOTH_EMPTY); | |
1917 | serial_out(up, UART_TX, 13); | |
1918 | } | |
1919 | ||
1920 | /* | |
1921 | * Finally, wait for transmitter to become empty | |
1922 | * and restore the IER | |
1923 | */ | |
1924 | wait_for_xmitr(up, BOTH_EMPTY); | |
1925 | serial_out(up, UART_IER, ier); | |
1926 | } | |
1927 | ||
1928 | #endif /* CONFIG_CONSOLE_POLL */ | |
1929 | ||
1da177e4 LT |
1930 | static int serial8250_startup(struct uart_port *port) |
1931 | { | |
1932 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
1933 | unsigned long flags; | |
55d3b282 | 1934 | unsigned char lsr, iir; |
1da177e4 LT |
1935 | int retval; |
1936 | ||
1937 | up->capabilities = uart_config[up->port.type].flags; | |
1938 | up->mcr = 0; | |
1939 | ||
1940 | if (up->port.type == PORT_16C950) { | |
1941 | /* Wake up and initialize UART */ | |
1942 | up->acr = 0; | |
1943 | serial_outp(up, UART_LCR, 0xBF); | |
1944 | serial_outp(up, UART_EFR, UART_EFR_ECB); | |
1945 | serial_outp(up, UART_IER, 0); | |
1946 | serial_outp(up, UART_LCR, 0); | |
1947 | serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ | |
1948 | serial_outp(up, UART_LCR, 0xBF); | |
1949 | serial_outp(up, UART_EFR, UART_EFR_ECB); | |
1950 | serial_outp(up, UART_LCR, 0); | |
1951 | } | |
1952 | ||
1953 | #ifdef CONFIG_SERIAL_8250_RSA | |
1954 | /* | |
1955 | * If this is an RSA port, see if we can kick it up to the | |
1956 | * higher speed clock. | |
1957 | */ | |
1958 | enable_rsa(up); | |
1959 | #endif | |
1960 | ||
1961 | /* | |
1962 | * Clear the FIFO buffers and disable them. | |
7f927fcc | 1963 | * (they will be reenabled in set_termios()) |
1da177e4 LT |
1964 | */ |
1965 | serial8250_clear_fifos(up); | |
1966 | ||
1967 | /* | |
1968 | * Clear the interrupt registers. | |
1969 | */ | |
1970 | (void) serial_inp(up, UART_LSR); | |
1971 | (void) serial_inp(up, UART_RX); | |
1972 | (void) serial_inp(up, UART_IIR); | |
1973 | (void) serial_inp(up, UART_MSR); | |
1974 | ||
1975 | /* | |
1976 | * At this point, there's no way the LSR could still be 0xff; | |
1977 | * if it is, then bail out, because there's likely no UART | |
1978 | * here. | |
1979 | */ | |
1980 | if (!(up->port.flags & UPF_BUGGY_UART) && | |
1981 | (serial_inp(up, UART_LSR) == 0xff)) { | |
8440838b DM |
1982 | printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n", |
1983 | serial_index(&up->port)); | |
1da177e4 LT |
1984 | return -ENODEV; |
1985 | } | |
1986 | ||
1987 | /* | |
1988 | * For a XR16C850, we need to set the trigger levels | |
1989 | */ | |
1990 | if (up->port.type == PORT_16850) { | |
1991 | unsigned char fctr; | |
1992 | ||
1993 | serial_outp(up, UART_LCR, 0xbf); | |
1994 | ||
1995 | fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); | |
1996 | serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX); | |
1997 | serial_outp(up, UART_TRG, UART_TRG_96); | |
1998 | serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX); | |
1999 | serial_outp(up, UART_TRG, UART_TRG_96); | |
2000 | ||
2001 | serial_outp(up, UART_LCR, 0); | |
2002 | } | |
2003 | ||
40b36daa | 2004 | if (is_real_interrupt(up->port.irq)) { |
01c194d9 | 2005 | unsigned char iir1; |
40b36daa AW |
2006 | /* |
2007 | * Test for UARTs that do not reassert THRE when the | |
2008 | * transmitter is idle and the interrupt has already | |
2009 | * been cleared. Real 16550s should always reassert | |
2010 | * this interrupt whenever the transmitter is idle and | |
2011 | * the interrupt is enabled. Delays are necessary to | |
2012 | * allow register changes to become visible. | |
2013 | */ | |
c389d27b | 2014 | spin_lock_irqsave(&up->port.lock, flags); |
768aec0b AV |
2015 | if (up->port.flags & UPF_SHARE_IRQ) |
2016 | disable_irq_nosync(up->port.irq); | |
40b36daa AW |
2017 | |
2018 | wait_for_xmitr(up, UART_LSR_THRE); | |
2019 | serial_out_sync(up, UART_IER, UART_IER_THRI); | |
2020 | udelay(1); /* allow THRE to set */ | |
01c194d9 | 2021 | iir1 = serial_in(up, UART_IIR); |
40b36daa AW |
2022 | serial_out(up, UART_IER, 0); |
2023 | serial_out_sync(up, UART_IER, UART_IER_THRI); | |
2024 | udelay(1); /* allow a working UART time to re-assert THRE */ | |
2025 | iir = serial_in(up, UART_IIR); | |
2026 | serial_out(up, UART_IER, 0); | |
2027 | ||
768aec0b AV |
2028 | if (up->port.flags & UPF_SHARE_IRQ) |
2029 | enable_irq(up->port.irq); | |
c389d27b | 2030 | spin_unlock_irqrestore(&up->port.lock, flags); |
40b36daa AW |
2031 | |
2032 | /* | |
2033 | * If the interrupt is not reasserted, setup a timer to | |
2034 | * kick the UART on a regular basis. | |
2035 | */ | |
01c194d9 | 2036 | if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { |
363f66fe | 2037 | up->bugs |= UART_BUG_THRE; |
8440838b DM |
2038 | pr_debug("ttyS%d - using backup timer\n", |
2039 | serial_index(port)); | |
40b36daa AW |
2040 | } |
2041 | } | |
2042 | ||
363f66fe WN |
2043 | /* |
2044 | * The above check will only give an accurate result the first time | |
2045 | * the port is opened so this value needs to be preserved. | |
2046 | */ | |
2047 | if (up->bugs & UART_BUG_THRE) { | |
2048 | up->timer.function = serial8250_backup_timeout; | |
2049 | up->timer.data = (unsigned long)up; | |
2050 | mod_timer(&up->timer, jiffies + | |
2051 | poll_timeout(up->port.timeout) + HZ / 5); | |
2052 | } | |
2053 | ||
1da177e4 LT |
2054 | /* |
2055 | * If the "interrupt" for this port doesn't correspond with any | |
2056 | * hardware interrupt, we use a timer-based system. The original | |
2057 | * driver used to do this with IRQ0. | |
2058 | */ | |
2059 | if (!is_real_interrupt(up->port.irq)) { | |
1da177e4 | 2060 | up->timer.data = (unsigned long)up; |
40b36daa | 2061 | mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout)); |
1da177e4 LT |
2062 | } else { |
2063 | retval = serial_link_irq_chain(up); | |
2064 | if (retval) | |
2065 | return retval; | |
2066 | } | |
2067 | ||
2068 | /* | |
2069 | * Now, initialize the UART | |
2070 | */ | |
2071 | serial_outp(up, UART_LCR, UART_LCR_WLEN8); | |
2072 | ||
2073 | spin_lock_irqsave(&up->port.lock, flags); | |
2074 | if (up->port.flags & UPF_FOURPORT) { | |
2075 | if (!is_real_interrupt(up->port.irq)) | |
2076 | up->port.mctrl |= TIOCM_OUT1; | |
2077 | } else | |
2078 | /* | |
2079 | * Most PC uarts need OUT2 raised to enable interrupts. | |
2080 | */ | |
2081 | if (is_real_interrupt(up->port.irq)) | |
2082 | up->port.mctrl |= TIOCM_OUT2; | |
2083 | ||
2084 | serial8250_set_mctrl(&up->port, up->port.mctrl); | |
55d3b282 RK |
2085 | |
2086 | /* | |
2087 | * Do a quick test to see if we receive an | |
2088 | * interrupt when we enable the TX irq. | |
2089 | */ | |
2090 | serial_outp(up, UART_IER, UART_IER_THRI); | |
2091 | lsr = serial_in(up, UART_LSR); | |
2092 | iir = serial_in(up, UART_IIR); | |
2093 | serial_outp(up, UART_IER, 0); | |
2094 | ||
2095 | if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { | |
67f7654e RK |
2096 | if (!(up->bugs & UART_BUG_TXEN)) { |
2097 | up->bugs |= UART_BUG_TXEN; | |
55d3b282 | 2098 | pr_debug("ttyS%d - enabling bad tx status workarounds\n", |
8440838b | 2099 | serial_index(port)); |
55d3b282 RK |
2100 | } |
2101 | } else { | |
67f7654e | 2102 | up->bugs &= ~UART_BUG_TXEN; |
55d3b282 RK |
2103 | } |
2104 | ||
1da177e4 LT |
2105 | spin_unlock_irqrestore(&up->port.lock, flags); |
2106 | ||
ad4c2aa6 CM |
2107 | /* |
2108 | * Clear the interrupt registers again for luck, and clear the | |
2109 | * saved flags to avoid getting false values from polling | |
2110 | * routines or the previous session. | |
2111 | */ | |
2112 | serial_inp(up, UART_LSR); | |
2113 | serial_inp(up, UART_RX); | |
2114 | serial_inp(up, UART_IIR); | |
2115 | serial_inp(up, UART_MSR); | |
2116 | up->lsr_saved_flags = 0; | |
2117 | up->msr_saved_flags = 0; | |
2118 | ||
1da177e4 LT |
2119 | /* |
2120 | * Finally, enable interrupts. Note: Modem status interrupts | |
2121 | * are set via set_termios(), which will be occurring imminently | |
2122 | * anyway, so we don't enable them here. | |
2123 | */ | |
2124 | up->ier = UART_IER_RLSI | UART_IER_RDI; | |
2125 | serial_outp(up, UART_IER, up->ier); | |
2126 | ||
2127 | if (up->port.flags & UPF_FOURPORT) { | |
2128 | unsigned int icp; | |
2129 | /* | |
2130 | * Enable interrupts on the AST Fourport board | |
2131 | */ | |
2132 | icp = (up->port.iobase & 0xfe0) | 0x01f; | |
2133 | outb_p(0x80, icp); | |
2134 | (void) inb_p(icp); | |
2135 | } | |
2136 | ||
1da177e4 LT |
2137 | return 0; |
2138 | } | |
2139 | ||
2140 | static void serial8250_shutdown(struct uart_port *port) | |
2141 | { | |
2142 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2143 | unsigned long flags; | |
2144 | ||
2145 | /* | |
2146 | * Disable interrupts from this port | |
2147 | */ | |
2148 | up->ier = 0; | |
2149 | serial_outp(up, UART_IER, 0); | |
2150 | ||
2151 | spin_lock_irqsave(&up->port.lock, flags); | |
2152 | if (up->port.flags & UPF_FOURPORT) { | |
2153 | /* reset interrupts on the AST Fourport board */ | |
2154 | inb((up->port.iobase & 0xfe0) | 0x1f); | |
2155 | up->port.mctrl |= TIOCM_OUT1; | |
2156 | } else | |
2157 | up->port.mctrl &= ~TIOCM_OUT2; | |
2158 | ||
2159 | serial8250_set_mctrl(&up->port, up->port.mctrl); | |
2160 | spin_unlock_irqrestore(&up->port.lock, flags); | |
2161 | ||
2162 | /* | |
2163 | * Disable break condition and FIFOs | |
2164 | */ | |
2165 | serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); | |
2166 | serial8250_clear_fifos(up); | |
2167 | ||
2168 | #ifdef CONFIG_SERIAL_8250_RSA | |
2169 | /* | |
2170 | * Reset the RSA board back to 115kbps compat mode. | |
2171 | */ | |
2172 | disable_rsa(up); | |
2173 | #endif | |
2174 | ||
2175 | /* | |
2176 | * Read data port to reset things, and then unlink from | |
2177 | * the IRQ chain. | |
2178 | */ | |
2179 | (void) serial_in(up, UART_RX); | |
2180 | ||
40b36daa AW |
2181 | del_timer_sync(&up->timer); |
2182 | up->timer.function = serial8250_timeout; | |
2183 | if (is_real_interrupt(up->port.irq)) | |
1da177e4 LT |
2184 | serial_unlink_irq_chain(up); |
2185 | } | |
2186 | ||
2187 | static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) | |
2188 | { | |
2189 | unsigned int quot; | |
2190 | ||
2191 | /* | |
2192 | * Handle magic divisors for baud rates above baud_base on | |
2193 | * SMSC SuperIO chips. | |
2194 | */ | |
2195 | if ((port->flags & UPF_MAGIC_MULTIPLIER) && | |
2196 | baud == (port->uartclk/4)) | |
2197 | quot = 0x8001; | |
2198 | else if ((port->flags & UPF_MAGIC_MULTIPLIER) && | |
2199 | baud == (port->uartclk/8)) | |
2200 | quot = 0x8002; | |
2201 | else | |
2202 | quot = uart_get_divisor(port, baud); | |
2203 | ||
2204 | return quot; | |
2205 | } | |
2206 | ||
2207 | static void | |
606d099c AC |
2208 | serial8250_set_termios(struct uart_port *port, struct ktermios *termios, |
2209 | struct ktermios *old) | |
1da177e4 LT |
2210 | { |
2211 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2212 | unsigned char cval, fcr = 0; | |
2213 | unsigned long flags; | |
2214 | unsigned int baud, quot; | |
2215 | ||
2216 | switch (termios->c_cflag & CSIZE) { | |
2217 | case CS5: | |
0a8b80c5 | 2218 | cval = UART_LCR_WLEN5; |
1da177e4 LT |
2219 | break; |
2220 | case CS6: | |
0a8b80c5 | 2221 | cval = UART_LCR_WLEN6; |
1da177e4 LT |
2222 | break; |
2223 | case CS7: | |
0a8b80c5 | 2224 | cval = UART_LCR_WLEN7; |
1da177e4 LT |
2225 | break; |
2226 | default: | |
2227 | case CS8: | |
0a8b80c5 | 2228 | cval = UART_LCR_WLEN8; |
1da177e4 LT |
2229 | break; |
2230 | } | |
2231 | ||
2232 | if (termios->c_cflag & CSTOPB) | |
0a8b80c5 | 2233 | cval |= UART_LCR_STOP; |
1da177e4 LT |
2234 | if (termios->c_cflag & PARENB) |
2235 | cval |= UART_LCR_PARITY; | |
2236 | if (!(termios->c_cflag & PARODD)) | |
2237 | cval |= UART_LCR_EPAR; | |
2238 | #ifdef CMSPAR | |
2239 | if (termios->c_cflag & CMSPAR) | |
2240 | cval |= UART_LCR_SPAR; | |
2241 | #endif | |
2242 | ||
2243 | /* | |
2244 | * Ask the core to calculate the divisor for us. | |
2245 | */ | |
bd71c182 | 2246 | baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); |
1da177e4 LT |
2247 | quot = serial8250_get_divisor(port, baud); |
2248 | ||
2249 | /* | |
4ba5e35d | 2250 | * Oxford Semi 952 rev B workaround |
1da177e4 | 2251 | */ |
4ba5e35d | 2252 | if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) |
3e8d4e20 | 2253 | quot++; |
1da177e4 LT |
2254 | |
2255 | if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { | |
2256 | if (baud < 2400) | |
2257 | fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; | |
2258 | else | |
2259 | fcr = uart_config[up->port.type].fcr; | |
2260 | } | |
2261 | ||
2262 | /* | |
2263 | * MCR-based auto flow control. When AFE is enabled, RTS will be | |
2264 | * deasserted when the receive FIFO contains more characters than | |
2265 | * the trigger, or the MCR RTS bit is cleared. In the case where | |
2266 | * the remote UART is not using CTS auto flow control, we must | |
2267 | * have sufficient FIFO entries for the latency of the remote | |
2268 | * UART to respond. IOW, at least 32 bytes of FIFO. | |
2269 | */ | |
2270 | if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) { | |
2271 | up->mcr &= ~UART_MCR_AFE; | |
2272 | if (termios->c_cflag & CRTSCTS) | |
2273 | up->mcr |= UART_MCR_AFE; | |
2274 | } | |
2275 | ||
2276 | /* | |
2277 | * Ok, we're now changing the port state. Do it with | |
2278 | * interrupts disabled. | |
2279 | */ | |
2280 | spin_lock_irqsave(&up->port.lock, flags); | |
2281 | ||
2282 | /* | |
2283 | * Update the per-port timeout. | |
2284 | */ | |
2285 | uart_update_timeout(port, termios->c_cflag, baud); | |
2286 | ||
2287 | up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; | |
2288 | if (termios->c_iflag & INPCK) | |
2289 | up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; | |
2290 | if (termios->c_iflag & (BRKINT | PARMRK)) | |
2291 | up->port.read_status_mask |= UART_LSR_BI; | |
2292 | ||
2293 | /* | |
2294 | * Characteres to ignore | |
2295 | */ | |
2296 | up->port.ignore_status_mask = 0; | |
2297 | if (termios->c_iflag & IGNPAR) | |
2298 | up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; | |
2299 | if (termios->c_iflag & IGNBRK) { | |
2300 | up->port.ignore_status_mask |= UART_LSR_BI; | |
2301 | /* | |
2302 | * If we're ignoring parity and break indicators, | |
2303 | * ignore overruns too (for real raw support). | |
2304 | */ | |
2305 | if (termios->c_iflag & IGNPAR) | |
2306 | up->port.ignore_status_mask |= UART_LSR_OE; | |
2307 | } | |
2308 | ||
2309 | /* | |
2310 | * ignore all characters if CREAD is not set | |
2311 | */ | |
2312 | if ((termios->c_cflag & CREAD) == 0) | |
2313 | up->port.ignore_status_mask |= UART_LSR_DR; | |
2314 | ||
2315 | /* | |
2316 | * CTS flow control flag and modem status interrupts | |
2317 | */ | |
2318 | up->ier &= ~UART_IER_MSI; | |
21c614a7 PA |
2319 | if (!(up->bugs & UART_BUG_NOMSR) && |
2320 | UART_ENABLE_MS(&up->port, termios->c_cflag)) | |
1da177e4 LT |
2321 | up->ier |= UART_IER_MSI; |
2322 | if (up->capabilities & UART_CAP_UUE) | |
2323 | up->ier |= UART_IER_UUE | UART_IER_RTOIE; | |
2324 | ||
2325 | serial_out(up, UART_IER, up->ier); | |
2326 | ||
2327 | if (up->capabilities & UART_CAP_EFR) { | |
2328 | unsigned char efr = 0; | |
2329 | /* | |
2330 | * TI16C752/Startech hardware flow control. FIXME: | |
2331 | * - TI16C752 requires control thresholds to be set. | |
2332 | * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled. | |
2333 | */ | |
2334 | if (termios->c_cflag & CRTSCTS) | |
2335 | efr |= UART_EFR_CTS; | |
2336 | ||
2337 | serial_outp(up, UART_LCR, 0xBF); | |
2338 | serial_outp(up, UART_EFR, efr); | |
2339 | } | |
2340 | ||
f2eda27d | 2341 | #ifdef CONFIG_ARCH_OMAP |
255341c6 | 2342 | /* Workaround to enable 115200 baud on OMAP1510 internal ports */ |
5668545a | 2343 | if (cpu_is_omap1510() && is_omap_port(up)) { |
255341c6 JM |
2344 | if (baud == 115200) { |
2345 | quot = 1; | |
2346 | serial_out(up, UART_OMAP_OSC_12M_SEL, 1); | |
2347 | } else | |
2348 | serial_out(up, UART_OMAP_OSC_12M_SEL, 0); | |
2349 | } | |
2350 | #endif | |
2351 | ||
1da177e4 LT |
2352 | if (up->capabilities & UART_NATSEMI) { |
2353 | /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ | |
2354 | serial_outp(up, UART_LCR, 0xe0); | |
2355 | } else { | |
2356 | serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ | |
2357 | } | |
2358 | ||
b32b19b8 | 2359 | serial_dl_write(up, quot); |
1da177e4 LT |
2360 | |
2361 | /* | |
2362 | * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR | |
2363 | * is written without DLAB set, this mode will be disabled. | |
2364 | */ | |
2365 | if (up->port.type == PORT_16750) | |
2366 | serial_outp(up, UART_FCR, fcr); | |
2367 | ||
2368 | serial_outp(up, UART_LCR, cval); /* reset DLAB */ | |
2369 | up->lcr = cval; /* Save LCR */ | |
2370 | if (up->port.type != PORT_16750) { | |
2371 | if (fcr & UART_FCR_ENABLE_FIFO) { | |
2372 | /* emulated UARTs (Lucent Venus 167x) need two steps */ | |
2373 | serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); | |
2374 | } | |
2375 | serial_outp(up, UART_FCR, fcr); /* set fcr */ | |
2376 | } | |
2377 | serial8250_set_mctrl(&up->port, up->port.mctrl); | |
2378 | spin_unlock_irqrestore(&up->port.lock, flags); | |
e991a2bd AC |
2379 | /* Don't rewrite B0 */ |
2380 | if (tty_termios_baud_rate(termios)) | |
2381 | tty_termios_encode_baud_rate(termios, baud, baud); | |
1da177e4 LT |
2382 | } |
2383 | ||
2384 | static void | |
2385 | serial8250_pm(struct uart_port *port, unsigned int state, | |
2386 | unsigned int oldstate) | |
2387 | { | |
2388 | struct uart_8250_port *p = (struct uart_8250_port *)port; | |
2389 | ||
2390 | serial8250_set_sleep(p, state != 0); | |
2391 | ||
2392 | if (p->pm) | |
2393 | p->pm(port, state, oldstate); | |
2394 | } | |
2395 | ||
f2eda27d RK |
2396 | static unsigned int serial8250_port_size(struct uart_8250_port *pt) |
2397 | { | |
2398 | if (pt->port.iotype == UPIO_AU) | |
2399 | return 0x100000; | |
2400 | #ifdef CONFIG_ARCH_OMAP | |
2401 | if (is_omap_port(pt)) | |
2402 | return 0x16 << pt->port.regshift; | |
2403 | #endif | |
2404 | return 8 << pt->port.regshift; | |
2405 | } | |
2406 | ||
1da177e4 LT |
2407 | /* |
2408 | * Resource handling. | |
2409 | */ | |
2410 | static int serial8250_request_std_resource(struct uart_8250_port *up) | |
2411 | { | |
f2eda27d | 2412 | unsigned int size = serial8250_port_size(up); |
1da177e4 LT |
2413 | int ret = 0; |
2414 | ||
2415 | switch (up->port.iotype) { | |
85835f44 | 2416 | case UPIO_AU: |
0b30d668 SS |
2417 | case UPIO_TSI: |
2418 | case UPIO_MEM32: | |
1da177e4 | 2419 | case UPIO_MEM: |
beab697a | 2420 | case UPIO_DWAPB: |
1da177e4 LT |
2421 | if (!up->port.mapbase) |
2422 | break; | |
2423 | ||
2424 | if (!request_mem_region(up->port.mapbase, size, "serial")) { | |
2425 | ret = -EBUSY; | |
2426 | break; | |
2427 | } | |
2428 | ||
2429 | if (up->port.flags & UPF_IOREMAP) { | |
6f441fe9 AC |
2430 | up->port.membase = ioremap_nocache(up->port.mapbase, |
2431 | size); | |
1da177e4 LT |
2432 | if (!up->port.membase) { |
2433 | release_mem_region(up->port.mapbase, size); | |
2434 | ret = -ENOMEM; | |
2435 | } | |
2436 | } | |
2437 | break; | |
2438 | ||
2439 | case UPIO_HUB6: | |
2440 | case UPIO_PORT: | |
2441 | if (!request_region(up->port.iobase, size, "serial")) | |
2442 | ret = -EBUSY; | |
2443 | break; | |
2444 | } | |
2445 | return ret; | |
2446 | } | |
2447 | ||
2448 | static void serial8250_release_std_resource(struct uart_8250_port *up) | |
2449 | { | |
f2eda27d | 2450 | unsigned int size = serial8250_port_size(up); |
1da177e4 LT |
2451 | |
2452 | switch (up->port.iotype) { | |
85835f44 | 2453 | case UPIO_AU: |
0b30d668 SS |
2454 | case UPIO_TSI: |
2455 | case UPIO_MEM32: | |
1da177e4 | 2456 | case UPIO_MEM: |
beab697a | 2457 | case UPIO_DWAPB: |
1da177e4 LT |
2458 | if (!up->port.mapbase) |
2459 | break; | |
2460 | ||
2461 | if (up->port.flags & UPF_IOREMAP) { | |
2462 | iounmap(up->port.membase); | |
2463 | up->port.membase = NULL; | |
2464 | } | |
2465 | ||
2466 | release_mem_region(up->port.mapbase, size); | |
2467 | break; | |
2468 | ||
2469 | case UPIO_HUB6: | |
2470 | case UPIO_PORT: | |
2471 | release_region(up->port.iobase, size); | |
2472 | break; | |
2473 | } | |
2474 | } | |
2475 | ||
2476 | static int serial8250_request_rsa_resource(struct uart_8250_port *up) | |
2477 | { | |
2478 | unsigned long start = UART_RSA_BASE << up->port.regshift; | |
2479 | unsigned int size = 8 << up->port.regshift; | |
0b30d668 | 2480 | int ret = -EINVAL; |
1da177e4 LT |
2481 | |
2482 | switch (up->port.iotype) { | |
1da177e4 LT |
2483 | case UPIO_HUB6: |
2484 | case UPIO_PORT: | |
2485 | start += up->port.iobase; | |
0b30d668 SS |
2486 | if (request_region(start, size, "serial-rsa")) |
2487 | ret = 0; | |
2488 | else | |
1da177e4 LT |
2489 | ret = -EBUSY; |
2490 | break; | |
2491 | } | |
2492 | ||
2493 | return ret; | |
2494 | } | |
2495 | ||
2496 | static void serial8250_release_rsa_resource(struct uart_8250_port *up) | |
2497 | { | |
2498 | unsigned long offset = UART_RSA_BASE << up->port.regshift; | |
2499 | unsigned int size = 8 << up->port.regshift; | |
2500 | ||
2501 | switch (up->port.iotype) { | |
1da177e4 LT |
2502 | case UPIO_HUB6: |
2503 | case UPIO_PORT: | |
2504 | release_region(up->port.iobase + offset, size); | |
2505 | break; | |
2506 | } | |
2507 | } | |
2508 | ||
2509 | static void serial8250_release_port(struct uart_port *port) | |
2510 | { | |
2511 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2512 | ||
2513 | serial8250_release_std_resource(up); | |
2514 | if (up->port.type == PORT_RSA) | |
2515 | serial8250_release_rsa_resource(up); | |
2516 | } | |
2517 | ||
2518 | static int serial8250_request_port(struct uart_port *port) | |
2519 | { | |
2520 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2521 | int ret = 0; | |
2522 | ||
2523 | ret = serial8250_request_std_resource(up); | |
2524 | if (ret == 0 && up->port.type == PORT_RSA) { | |
2525 | ret = serial8250_request_rsa_resource(up); | |
2526 | if (ret < 0) | |
2527 | serial8250_release_std_resource(up); | |
2528 | } | |
2529 | ||
2530 | return ret; | |
2531 | } | |
2532 | ||
2533 | static void serial8250_config_port(struct uart_port *port, int flags) | |
2534 | { | |
2535 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2536 | int probeflags = PROBE_ANY; | |
2537 | int ret; | |
2538 | ||
1da177e4 LT |
2539 | /* |
2540 | * Find the region that we can probe for. This in turn | |
2541 | * tells us whether we can probe for the type of port. | |
2542 | */ | |
2543 | ret = serial8250_request_std_resource(up); | |
2544 | if (ret < 0) | |
2545 | return; | |
2546 | ||
2547 | ret = serial8250_request_rsa_resource(up); | |
2548 | if (ret < 0) | |
2549 | probeflags &= ~PROBE_RSA; | |
2550 | ||
2551 | if (flags & UART_CONFIG_TYPE) | |
2552 | autoconfig(up, probeflags); | |
2553 | if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) | |
2554 | autoconfig_irq(up); | |
2555 | ||
2556 | if (up->port.type != PORT_RSA && probeflags & PROBE_RSA) | |
2557 | serial8250_release_rsa_resource(up); | |
2558 | if (up->port.type == PORT_UNKNOWN) | |
2559 | serial8250_release_std_resource(up); | |
2560 | } | |
2561 | ||
2562 | static int | |
2563 | serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) | |
2564 | { | |
a62c4133 | 2565 | if (ser->irq >= nr_irqs || ser->irq < 0 || |
1da177e4 LT |
2566 | ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || |
2567 | ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || | |
2568 | ser->type == PORT_STARTECH) | |
2569 | return -EINVAL; | |
2570 | return 0; | |
2571 | } | |
2572 | ||
2573 | static const char * | |
2574 | serial8250_type(struct uart_port *port) | |
2575 | { | |
2576 | int type = port->type; | |
2577 | ||
2578 | if (type >= ARRAY_SIZE(uart_config)) | |
2579 | type = 0; | |
2580 | return uart_config[type].name; | |
2581 | } | |
2582 | ||
2583 | static struct uart_ops serial8250_pops = { | |
2584 | .tx_empty = serial8250_tx_empty, | |
2585 | .set_mctrl = serial8250_set_mctrl, | |
2586 | .get_mctrl = serial8250_get_mctrl, | |
2587 | .stop_tx = serial8250_stop_tx, | |
2588 | .start_tx = serial8250_start_tx, | |
2589 | .stop_rx = serial8250_stop_rx, | |
2590 | .enable_ms = serial8250_enable_ms, | |
2591 | .break_ctl = serial8250_break_ctl, | |
2592 | .startup = serial8250_startup, | |
2593 | .shutdown = serial8250_shutdown, | |
2594 | .set_termios = serial8250_set_termios, | |
2595 | .pm = serial8250_pm, | |
2596 | .type = serial8250_type, | |
2597 | .release_port = serial8250_release_port, | |
2598 | .request_port = serial8250_request_port, | |
2599 | .config_port = serial8250_config_port, | |
2600 | .verify_port = serial8250_verify_port, | |
f2d937f3 JW |
2601 | #ifdef CONFIG_CONSOLE_POLL |
2602 | .poll_get_char = serial8250_get_poll_char, | |
2603 | .poll_put_char = serial8250_put_poll_char, | |
2604 | #endif | |
1da177e4 LT |
2605 | }; |
2606 | ||
2607 | static struct uart_8250_port serial8250_ports[UART_NR]; | |
2608 | ||
2609 | static void __init serial8250_isa_init_ports(void) | |
2610 | { | |
2611 | struct uart_8250_port *up; | |
2612 | static int first = 1; | |
2613 | int i; | |
2614 | ||
2615 | if (!first) | |
2616 | return; | |
2617 | first = 0; | |
2618 | ||
a61c2d78 | 2619 | for (i = 0; i < nr_uarts; i++) { |
1da177e4 LT |
2620 | struct uart_8250_port *up = &serial8250_ports[i]; |
2621 | ||
2622 | up->port.line = i; | |
2623 | spin_lock_init(&up->port.lock); | |
2624 | ||
2625 | init_timer(&up->timer); | |
2626 | up->timer.function = serial8250_timeout; | |
2627 | ||
2628 | /* | |
2629 | * ALPHA_KLUDGE_MCR needs to be killed. | |
2630 | */ | |
2631 | up->mcr_mask = ~ALPHA_KLUDGE_MCR; | |
2632 | up->mcr_force = ALPHA_KLUDGE_MCR; | |
2633 | ||
2634 | up->port.ops = &serial8250_pops; | |
2635 | } | |
2636 | ||
44454bcd | 2637 | for (i = 0, up = serial8250_ports; |
a61c2d78 | 2638 | i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; |
1da177e4 LT |
2639 | i++, up++) { |
2640 | up->port.iobase = old_serial_port[i].port; | |
2641 | up->port.irq = irq_canonicalize(old_serial_port[i].irq); | |
2642 | up->port.uartclk = old_serial_port[i].baud_base * 16; | |
2643 | up->port.flags = old_serial_port[i].flags; | |
2644 | up->port.hub6 = old_serial_port[i].hub6; | |
2645 | up->port.membase = old_serial_port[i].iomem_base; | |
2646 | up->port.iotype = old_serial_port[i].io_type; | |
2647 | up->port.regshift = old_serial_port[i].iomem_reg_shift; | |
7d6a07d1 | 2648 | set_io_from_upio(&up->port); |
1da177e4 LT |
2649 | if (share_irqs) |
2650 | up->port.flags |= UPF_SHARE_IRQ; | |
2651 | } | |
2652 | } | |
2653 | ||
2654 | static void __init | |
2655 | serial8250_register_ports(struct uart_driver *drv, struct device *dev) | |
2656 | { | |
2657 | int i; | |
2658 | ||
2659 | serial8250_isa_init_ports(); | |
2660 | ||
a61c2d78 | 2661 | for (i = 0; i < nr_uarts; i++) { |
1da177e4 LT |
2662 | struct uart_8250_port *up = &serial8250_ports[i]; |
2663 | ||
2664 | up->port.dev = dev; | |
2665 | uart_add_one_port(drv, &up->port); | |
2666 | } | |
2667 | } | |
2668 | ||
2669 | #ifdef CONFIG_SERIAL_8250_CONSOLE | |
2670 | ||
d358788f RK |
2671 | static void serial8250_console_putchar(struct uart_port *port, int ch) |
2672 | { | |
2673 | struct uart_8250_port *up = (struct uart_8250_port *)port; | |
2674 | ||
2675 | wait_for_xmitr(up, UART_LSR_THRE); | |
2676 | serial_out(up, UART_TX, ch); | |
2677 | } | |
2678 | ||
1da177e4 LT |
2679 | /* |
2680 | * Print a string to the serial port trying not to disturb | |
2681 | * any possible real use of the port... | |
2682 | * | |
2683 | * The console_lock must be held when we get here. | |
2684 | */ | |
2685 | static void | |
2686 | serial8250_console_write(struct console *co, const char *s, unsigned int count) | |
2687 | { | |
2688 | struct uart_8250_port *up = &serial8250_ports[co->index]; | |
d8a5a8d7 | 2689 | unsigned long flags; |
1da177e4 | 2690 | unsigned int ier; |
d8a5a8d7 | 2691 | int locked = 1; |
1da177e4 | 2692 | |
78512ece AM |
2693 | touch_nmi_watchdog(); |
2694 | ||
68aa2c0d AM |
2695 | local_irq_save(flags); |
2696 | if (up->port.sysrq) { | |
2697 | /* serial8250_handle_port() already took the lock */ | |
2698 | locked = 0; | |
2699 | } else if (oops_in_progress) { | |
2700 | locked = spin_trylock(&up->port.lock); | |
d8a5a8d7 | 2701 | } else |
68aa2c0d | 2702 | spin_lock(&up->port.lock); |
d8a5a8d7 | 2703 | |
1da177e4 | 2704 | /* |
dc7bf130 | 2705 | * First save the IER then disable the interrupts |
1da177e4 LT |
2706 | */ |
2707 | ier = serial_in(up, UART_IER); | |
2708 | ||
2709 | if (up->capabilities & UART_CAP_UUE) | |
2710 | serial_out(up, UART_IER, UART_IER_UUE); | |
2711 | else | |
2712 | serial_out(up, UART_IER, 0); | |
2713 | ||
d358788f | 2714 | uart_console_write(&up->port, s, count, serial8250_console_putchar); |
1da177e4 LT |
2715 | |
2716 | /* | |
2717 | * Finally, wait for transmitter to become empty | |
2718 | * and restore the IER | |
2719 | */ | |
f91a3715 | 2720 | wait_for_xmitr(up, BOTH_EMPTY); |
a88d75b2 | 2721 | serial_out(up, UART_IER, ier); |
d8a5a8d7 | 2722 | |
ad4c2aa6 CM |
2723 | /* |
2724 | * The receive handling will happen properly because the | |
2725 | * receive ready bit will still be set; it is not cleared | |
2726 | * on read. However, modem control will not, we must | |
2727 | * call it if we have saved something in the saved flags | |
2728 | * while processing with interrupts off. | |
2729 | */ | |
2730 | if (up->msr_saved_flags) | |
2731 | check_modem_status(up); | |
2732 | ||
d8a5a8d7 | 2733 | if (locked) |
68aa2c0d AM |
2734 | spin_unlock(&up->port.lock); |
2735 | local_irq_restore(flags); | |
1da177e4 LT |
2736 | } |
2737 | ||
118c0ace | 2738 | static int __init serial8250_console_setup(struct console *co, char *options) |
1da177e4 LT |
2739 | { |
2740 | struct uart_port *port; | |
2741 | int baud = 9600; | |
2742 | int bits = 8; | |
2743 | int parity = 'n'; | |
2744 | int flow = 'n'; | |
2745 | ||
2746 | /* | |
2747 | * Check whether an invalid uart number has been specified, and | |
2748 | * if so, search for the first available port that does have | |
2749 | * console support. | |
2750 | */ | |
a61c2d78 | 2751 | if (co->index >= nr_uarts) |
1da177e4 LT |
2752 | co->index = 0; |
2753 | port = &serial8250_ports[co->index].port; | |
2754 | if (!port->iobase && !port->membase) | |
2755 | return -ENODEV; | |
2756 | ||
2757 | if (options) | |
2758 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
2759 | ||
2760 | return uart_set_options(port, co, baud, parity, bits, flow); | |
2761 | } | |
2762 | ||
b6b1d877 | 2763 | static int serial8250_console_early_setup(void) |
18a8bd94 YL |
2764 | { |
2765 | return serial8250_find_port_for_earlycon(); | |
2766 | } | |
2767 | ||
1da177e4 LT |
2768 | static struct console serial8250_console = { |
2769 | .name = "ttyS", | |
2770 | .write = serial8250_console_write, | |
2771 | .device = uart_console_device, | |
2772 | .setup = serial8250_console_setup, | |
18a8bd94 | 2773 | .early_setup = serial8250_console_early_setup, |
1da177e4 LT |
2774 | .flags = CON_PRINTBUFFER, |
2775 | .index = -1, | |
2776 | .data = &serial8250_reg, | |
2777 | }; | |
2778 | ||
2779 | static int __init serial8250_console_init(void) | |
2780 | { | |
05d81d22 EB |
2781 | if (nr_uarts > UART_NR) |
2782 | nr_uarts = UART_NR; | |
2783 | ||
1da177e4 LT |
2784 | serial8250_isa_init_ports(); |
2785 | register_console(&serial8250_console); | |
2786 | return 0; | |
2787 | } | |
2788 | console_initcall(serial8250_console_init); | |
2789 | ||
18a8bd94 | 2790 | int serial8250_find_port(struct uart_port *p) |
1da177e4 LT |
2791 | { |
2792 | int line; | |
2793 | struct uart_port *port; | |
2794 | ||
a61c2d78 | 2795 | for (line = 0; line < nr_uarts; line++) { |
1da177e4 | 2796 | port = &serial8250_ports[line].port; |
50aec3b5 | 2797 | if (uart_match_port(p, port)) |
1da177e4 LT |
2798 | return line; |
2799 | } | |
2800 | return -ENODEV; | |
2801 | } | |
2802 | ||
1da177e4 LT |
2803 | #define SERIAL8250_CONSOLE &serial8250_console |
2804 | #else | |
2805 | #define SERIAL8250_CONSOLE NULL | |
2806 | #endif | |
2807 | ||
2808 | static struct uart_driver serial8250_reg = { | |
2809 | .owner = THIS_MODULE, | |
2810 | .driver_name = "serial", | |
1da177e4 LT |
2811 | .dev_name = "ttyS", |
2812 | .major = TTY_MAJOR, | |
2813 | .minor = 64, | |
1da177e4 LT |
2814 | .cons = SERIAL8250_CONSOLE, |
2815 | }; | |
2816 | ||
d856c666 RK |
2817 | /* |
2818 | * early_serial_setup - early registration for 8250 ports | |
2819 | * | |
2820 | * Setup an 8250 port structure prior to console initialisation. Use | |
2821 | * after console initialisation will cause undefined behaviour. | |
2822 | */ | |
1da177e4 LT |
2823 | int __init early_serial_setup(struct uart_port *port) |
2824 | { | |
b430428a DD |
2825 | struct uart_port *p; |
2826 | ||
1da177e4 LT |
2827 | if (port->line >= ARRAY_SIZE(serial8250_ports)) |
2828 | return -ENODEV; | |
2829 | ||
2830 | serial8250_isa_init_ports(); | |
b430428a DD |
2831 | p = &serial8250_ports[port->line].port; |
2832 | p->iobase = port->iobase; | |
2833 | p->membase = port->membase; | |
2834 | p->irq = port->irq; | |
2835 | p->uartclk = port->uartclk; | |
2836 | p->fifosize = port->fifosize; | |
2837 | p->regshift = port->regshift; | |
2838 | p->iotype = port->iotype; | |
2839 | p->flags = port->flags; | |
2840 | p->mapbase = port->mapbase; | |
2841 | p->private_data = port->private_data; | |
125c97d8 HD |
2842 | p->type = port->type; |
2843 | p->line = port->line; | |
7d6a07d1 DD |
2844 | |
2845 | set_io_from_upio(p); | |
2846 | if (port->serial_in) | |
2847 | p->serial_in = port->serial_in; | |
2848 | if (port->serial_out) | |
2849 | p->serial_out = port->serial_out; | |
2850 | ||
1da177e4 LT |
2851 | return 0; |
2852 | } | |
2853 | ||
2854 | /** | |
2855 | * serial8250_suspend_port - suspend one serial port | |
2856 | * @line: serial line number | |
1da177e4 LT |
2857 | * |
2858 | * Suspend one serial port. | |
2859 | */ | |
2860 | void serial8250_suspend_port(int line) | |
2861 | { | |
2862 | uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); | |
2863 | } | |
2864 | ||
2865 | /** | |
2866 | * serial8250_resume_port - resume one serial port | |
2867 | * @line: serial line number | |
1da177e4 LT |
2868 | * |
2869 | * Resume one serial port. | |
2870 | */ | |
2871 | void serial8250_resume_port(int line) | |
2872 | { | |
b5b82df6 DW |
2873 | struct uart_8250_port *up = &serial8250_ports[line]; |
2874 | ||
2875 | if (up->capabilities & UART_NATSEMI) { | |
2876 | unsigned char tmp; | |
2877 | ||
2878 | /* Ensure it's still in high speed mode */ | |
2879 | serial_outp(up, UART_LCR, 0xE0); | |
2880 | ||
2881 | tmp = serial_in(up, 0x04); /* EXCR2 */ | |
2882 | tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ | |
2883 | tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ | |
2884 | serial_outp(up, 0x04, tmp); | |
2885 | ||
2886 | serial_outp(up, UART_LCR, 0); | |
2887 | } | |
2888 | uart_resume_port(&serial8250_reg, &up->port); | |
1da177e4 LT |
2889 | } |
2890 | ||
2891 | /* | |
2892 | * Register a set of serial devices attached to a platform device. The | |
2893 | * list is terminated with a zero flags entry, which means we expect | |
2894 | * all entries to have at least UPF_BOOT_AUTOCONF set. | |
2895 | */ | |
3ae5eaec | 2896 | static int __devinit serial8250_probe(struct platform_device *dev) |
1da177e4 | 2897 | { |
3ae5eaec | 2898 | struct plat_serial8250_port *p = dev->dev.platform_data; |
1da177e4 | 2899 | struct uart_port port; |
ec9f47cd | 2900 | int ret, i; |
1da177e4 LT |
2901 | |
2902 | memset(&port, 0, sizeof(struct uart_port)); | |
2903 | ||
ec9f47cd | 2904 | for (i = 0; p && p->flags != 0; p++, i++) { |
74a19741 WN |
2905 | port.iobase = p->iobase; |
2906 | port.membase = p->membase; | |
2907 | port.irq = p->irq; | |
2908 | port.uartclk = p->uartclk; | |
2909 | port.regshift = p->regshift; | |
2910 | port.iotype = p->iotype; | |
2911 | port.flags = p->flags; | |
2912 | port.mapbase = p->mapbase; | |
2913 | port.hub6 = p->hub6; | |
2914 | port.private_data = p->private_data; | |
8e23fcc8 | 2915 | port.type = p->type; |
7d6a07d1 DD |
2916 | port.serial_in = p->serial_in; |
2917 | port.serial_out = p->serial_out; | |
74a19741 | 2918 | port.dev = &dev->dev; |
1da177e4 LT |
2919 | if (share_irqs) |
2920 | port.flags |= UPF_SHARE_IRQ; | |
ec9f47cd RK |
2921 | ret = serial8250_register_port(&port); |
2922 | if (ret < 0) { | |
3ae5eaec | 2923 | dev_err(&dev->dev, "unable to register port at index %d " |
4f640efb JB |
2924 | "(IO%lx MEM%llx IRQ%d): %d\n", i, |
2925 | p->iobase, (unsigned long long)p->mapbase, | |
2926 | p->irq, ret); | |
ec9f47cd | 2927 | } |
1da177e4 LT |
2928 | } |
2929 | return 0; | |
2930 | } | |
2931 | ||
2932 | /* | |
2933 | * Remove serial ports registered against a platform device. | |
2934 | */ | |
3ae5eaec | 2935 | static int __devexit serial8250_remove(struct platform_device *dev) |
1da177e4 LT |
2936 | { |
2937 | int i; | |
2938 | ||
a61c2d78 | 2939 | for (i = 0; i < nr_uarts; i++) { |
1da177e4 LT |
2940 | struct uart_8250_port *up = &serial8250_ports[i]; |
2941 | ||
3ae5eaec | 2942 | if (up->port.dev == &dev->dev) |
1da177e4 LT |
2943 | serial8250_unregister_port(i); |
2944 | } | |
2945 | return 0; | |
2946 | } | |
2947 | ||
3ae5eaec | 2948 | static int serial8250_suspend(struct platform_device *dev, pm_message_t state) |
1da177e4 LT |
2949 | { |
2950 | int i; | |
2951 | ||
1da177e4 LT |
2952 | for (i = 0; i < UART_NR; i++) { |
2953 | struct uart_8250_port *up = &serial8250_ports[i]; | |
2954 | ||
3ae5eaec | 2955 | if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) |
1da177e4 LT |
2956 | uart_suspend_port(&serial8250_reg, &up->port); |
2957 | } | |
2958 | ||
2959 | return 0; | |
2960 | } | |
2961 | ||
3ae5eaec | 2962 | static int serial8250_resume(struct platform_device *dev) |
1da177e4 LT |
2963 | { |
2964 | int i; | |
2965 | ||
1da177e4 LT |
2966 | for (i = 0; i < UART_NR; i++) { |
2967 | struct uart_8250_port *up = &serial8250_ports[i]; | |
2968 | ||
3ae5eaec | 2969 | if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) |
b5b82df6 | 2970 | serial8250_resume_port(i); |
1da177e4 LT |
2971 | } |
2972 | ||
2973 | return 0; | |
2974 | } | |
2975 | ||
3ae5eaec | 2976 | static struct platform_driver serial8250_isa_driver = { |
1da177e4 LT |
2977 | .probe = serial8250_probe, |
2978 | .remove = __devexit_p(serial8250_remove), | |
2979 | .suspend = serial8250_suspend, | |
2980 | .resume = serial8250_resume, | |
3ae5eaec RK |
2981 | .driver = { |
2982 | .name = "serial8250", | |
7493a314 | 2983 | .owner = THIS_MODULE, |
3ae5eaec | 2984 | }, |
1da177e4 LT |
2985 | }; |
2986 | ||
2987 | /* | |
2988 | * This "device" covers _all_ ISA 8250-compatible serial devices listed | |
2989 | * in the table in include/asm/serial.h | |
2990 | */ | |
2991 | static struct platform_device *serial8250_isa_devs; | |
2992 | ||
2993 | /* | |
2994 | * serial8250_register_port and serial8250_unregister_port allows for | |
2995 | * 16x50 serial ports to be configured at run-time, to support PCMCIA | |
2996 | * modems and PCI multiport cards. | |
2997 | */ | |
f392ecfa | 2998 | static DEFINE_MUTEX(serial_mutex); |
1da177e4 LT |
2999 | |
3000 | static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) | |
3001 | { | |
3002 | int i; | |
3003 | ||
3004 | /* | |
3005 | * First, find a port entry which matches. | |
3006 | */ | |
a61c2d78 | 3007 | for (i = 0; i < nr_uarts; i++) |
1da177e4 LT |
3008 | if (uart_match_port(&serial8250_ports[i].port, port)) |
3009 | return &serial8250_ports[i]; | |
3010 | ||
3011 | /* | |
3012 | * We didn't find a matching entry, so look for the first | |
3013 | * free entry. We look for one which hasn't been previously | |
3014 | * used (indicated by zero iobase). | |
3015 | */ | |
a61c2d78 | 3016 | for (i = 0; i < nr_uarts; i++) |
1da177e4 LT |
3017 | if (serial8250_ports[i].port.type == PORT_UNKNOWN && |
3018 | serial8250_ports[i].port.iobase == 0) | |
3019 | return &serial8250_ports[i]; | |
3020 | ||
3021 | /* | |
3022 | * That also failed. Last resort is to find any entry which | |
3023 | * doesn't have a real port associated with it. | |
3024 | */ | |
a61c2d78 | 3025 | for (i = 0; i < nr_uarts; i++) |
1da177e4 LT |
3026 | if (serial8250_ports[i].port.type == PORT_UNKNOWN) |
3027 | return &serial8250_ports[i]; | |
3028 | ||
3029 | return NULL; | |
3030 | } | |
3031 | ||
3032 | /** | |
3033 | * serial8250_register_port - register a serial port | |
3034 | * @port: serial port template | |
3035 | * | |
3036 | * Configure the serial port specified by the request. If the | |
3037 | * port exists and is in use, it is hung up and unregistered | |
3038 | * first. | |
3039 | * | |
3040 | * The port is then probed and if necessary the IRQ is autodetected | |
3041 | * If this fails an error is returned. | |
3042 | * | |
3043 | * On success the port is ready to use and the line number is returned. | |
3044 | */ | |
3045 | int serial8250_register_port(struct uart_port *port) | |
3046 | { | |
3047 | struct uart_8250_port *uart; | |
3048 | int ret = -ENOSPC; | |
3049 | ||
3050 | if (port->uartclk == 0) | |
3051 | return -EINVAL; | |
3052 | ||
f392ecfa | 3053 | mutex_lock(&serial_mutex); |
1da177e4 LT |
3054 | |
3055 | uart = serial8250_find_match_or_unused(port); | |
3056 | if (uart) { | |
3057 | uart_remove_one_port(&serial8250_reg, &uart->port); | |
3058 | ||
74a19741 WN |
3059 | uart->port.iobase = port->iobase; |
3060 | uart->port.membase = port->membase; | |
3061 | uart->port.irq = port->irq; | |
3062 | uart->port.uartclk = port->uartclk; | |
3063 | uart->port.fifosize = port->fifosize; | |
3064 | uart->port.regshift = port->regshift; | |
3065 | uart->port.iotype = port->iotype; | |
3066 | uart->port.flags = port->flags | UPF_BOOT_AUTOCONF; | |
3067 | uart->port.mapbase = port->mapbase; | |
3068 | uart->port.private_data = port->private_data; | |
1da177e4 LT |
3069 | if (port->dev) |
3070 | uart->port.dev = port->dev; | |
8e23fcc8 DD |
3071 | |
3072 | if (port->flags & UPF_FIXED_TYPE) { | |
3073 | uart->port.type = port->type; | |
3074 | uart->port.fifosize = uart_config[port->type].fifo_size; | |
3075 | uart->capabilities = uart_config[port->type].flags; | |
3076 | uart->tx_loadsz = uart_config[port->type].tx_loadsz; | |
3077 | } | |
3078 | ||
7d6a07d1 DD |
3079 | set_io_from_upio(&uart->port); |
3080 | /* Possibly override default I/O functions. */ | |
3081 | if (port->serial_in) | |
3082 | uart->port.serial_in = port->serial_in; | |
3083 | if (port->serial_out) | |
3084 | uart->port.serial_out = port->serial_out; | |
1da177e4 LT |
3085 | |
3086 | ret = uart_add_one_port(&serial8250_reg, &uart->port); | |
3087 | if (ret == 0) | |
3088 | ret = uart->port.line; | |
3089 | } | |
f392ecfa | 3090 | mutex_unlock(&serial_mutex); |
1da177e4 LT |
3091 | |
3092 | return ret; | |
3093 | } | |
3094 | EXPORT_SYMBOL(serial8250_register_port); | |
3095 | ||
3096 | /** | |
3097 | * serial8250_unregister_port - remove a 16x50 serial port at runtime | |
3098 | * @line: serial line number | |
3099 | * | |
3100 | * Remove one serial port. This may not be called from interrupt | |
3101 | * context. We hand the port back to the our control. | |
3102 | */ | |
3103 | void serial8250_unregister_port(int line) | |
3104 | { | |
3105 | struct uart_8250_port *uart = &serial8250_ports[line]; | |
3106 | ||
f392ecfa | 3107 | mutex_lock(&serial_mutex); |
1da177e4 LT |
3108 | uart_remove_one_port(&serial8250_reg, &uart->port); |
3109 | if (serial8250_isa_devs) { | |
3110 | uart->port.flags &= ~UPF_BOOT_AUTOCONF; | |
3111 | uart->port.type = PORT_UNKNOWN; | |
3112 | uart->port.dev = &serial8250_isa_devs->dev; | |
3113 | uart_add_one_port(&serial8250_reg, &uart->port); | |
3114 | } else { | |
3115 | uart->port.dev = NULL; | |
3116 | } | |
f392ecfa | 3117 | mutex_unlock(&serial_mutex); |
1da177e4 LT |
3118 | } |
3119 | EXPORT_SYMBOL(serial8250_unregister_port); | |
3120 | ||
3121 | static int __init serial8250_init(void) | |
3122 | { | |
25db8ad5 | 3123 | int ret; |
1da177e4 | 3124 | |
a61c2d78 DJ |
3125 | if (nr_uarts > UART_NR) |
3126 | nr_uarts = UART_NR; | |
3127 | ||
f1fb9bb8 | 3128 | printk(KERN_INFO "Serial: 8250/16550 driver, " |
a61c2d78 | 3129 | "%d ports, IRQ sharing %sabled\n", nr_uarts, |
1da177e4 LT |
3130 | share_irqs ? "en" : "dis"); |
3131 | ||
b70ac771 DM |
3132 | #ifdef CONFIG_SPARC |
3133 | ret = sunserial_register_minors(&serial8250_reg, UART_NR); | |
3134 | #else | |
3135 | serial8250_reg.nr = UART_NR; | |
1da177e4 | 3136 | ret = uart_register_driver(&serial8250_reg); |
b70ac771 | 3137 | #endif |
1da177e4 LT |
3138 | if (ret) |
3139 | goto out; | |
3140 | ||
7493a314 DT |
3141 | serial8250_isa_devs = platform_device_alloc("serial8250", |
3142 | PLAT8250_DEV_LEGACY); | |
3143 | if (!serial8250_isa_devs) { | |
3144 | ret = -ENOMEM; | |
bc965a7f | 3145 | goto unreg_uart_drv; |
1da177e4 LT |
3146 | } |
3147 | ||
7493a314 DT |
3148 | ret = platform_device_add(serial8250_isa_devs); |
3149 | if (ret) | |
3150 | goto put_dev; | |
3151 | ||
1da177e4 LT |
3152 | serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); |
3153 | ||
bc965a7f RK |
3154 | ret = platform_driver_register(&serial8250_isa_driver); |
3155 | if (ret == 0) | |
3156 | goto out; | |
1da177e4 | 3157 | |
bc965a7f | 3158 | platform_device_del(serial8250_isa_devs); |
25db8ad5 | 3159 | put_dev: |
7493a314 | 3160 | platform_device_put(serial8250_isa_devs); |
25db8ad5 | 3161 | unreg_uart_drv: |
b70ac771 DM |
3162 | #ifdef CONFIG_SPARC |
3163 | sunserial_unregister_minors(&serial8250_reg, UART_NR); | |
3164 | #else | |
1da177e4 | 3165 | uart_unregister_driver(&serial8250_reg); |
b70ac771 | 3166 | #endif |
25db8ad5 | 3167 | out: |
1da177e4 LT |
3168 | return ret; |
3169 | } | |
3170 | ||
3171 | static void __exit serial8250_exit(void) | |
3172 | { | |
3173 | struct platform_device *isa_dev = serial8250_isa_devs; | |
3174 | ||
3175 | /* | |
3176 | * This tells serial8250_unregister_port() not to re-register | |
3177 | * the ports (thereby making serial8250_isa_driver permanently | |
3178 | * in use.) | |
3179 | */ | |
3180 | serial8250_isa_devs = NULL; | |
3181 | ||
3ae5eaec | 3182 | platform_driver_unregister(&serial8250_isa_driver); |
1da177e4 LT |
3183 | platform_device_unregister(isa_dev); |
3184 | ||
b70ac771 DM |
3185 | #ifdef CONFIG_SPARC |
3186 | sunserial_unregister_minors(&serial8250_reg, UART_NR); | |
3187 | #else | |
1da177e4 | 3188 | uart_unregister_driver(&serial8250_reg); |
b70ac771 | 3189 | #endif |
1da177e4 LT |
3190 | } |
3191 | ||
3192 | module_init(serial8250_init); | |
3193 | module_exit(serial8250_exit); | |
3194 | ||
3195 | EXPORT_SYMBOL(serial8250_suspend_port); | |
3196 | EXPORT_SYMBOL(serial8250_resume_port); | |
3197 | ||
3198 | MODULE_LICENSE("GPL"); | |
d87a6d95 | 3199 | MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); |
1da177e4 LT |
3200 | |
3201 | module_param(share_irqs, uint, 0644); | |
3202 | MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" | |
3203 | " (unsafe)"); | |
3204 | ||
a61c2d78 DJ |
3205 | module_param(nr_uarts, uint, 0644); |
3206 | MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); | |
3207 | ||
1da177e4 LT |
3208 | #ifdef CONFIG_SERIAL_8250_RSA |
3209 | module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); | |
3210 | MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); | |
3211 | #endif | |
3212 | MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); |