Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * sata_sil.c - Silicon Image SATA | |
3 | * | |
4 | * Maintained by: Jeff Garzik <jgarzik@pobox.com> | |
5 | * Please ALWAYS copy linux-ide@vger.kernel.org | |
6 | * on emails. | |
7 | * | |
8 | * Copyright 2003 Red Hat, Inc. | |
9 | * Copyright 2003 Benjamin Herrenschmidt | |
10 | * | |
11 | * The contents of this file are subject to the Open | |
12 | * Software License version 1.1 that can be found at | |
13 | * http://www.opensource.org/licenses/osl-1.1.txt and is included herein | |
14 | * by reference. | |
15 | * | |
16 | * Alternatively, the contents of this file may be used under the terms | |
17 | * of the GNU General Public License version 2 (the "GPL") as distributed | |
18 | * in the kernel source COPYING file, in which case the provisions of | |
19 | * the GPL are applicable instead of the above. If you wish to allow | |
20 | * the use of your version of this file only under the terms of the | |
21 | * GPL and not to allow others to use your version of this file under | |
22 | * the OSL, indicate your decision by deleting the provisions above and | |
23 | * replace them with the notice and other provisions required by the GPL. | |
24 | * If you do not delete the provisions above, a recipient may use your | |
25 | * version of this file under either the OSL or the GPL. | |
26 | * | |
27 | */ | |
28 | ||
29 | #include <linux/kernel.h> | |
30 | #include <linux/module.h> | |
31 | #include <linux/pci.h> | |
32 | #include <linux/init.h> | |
33 | #include <linux/blkdev.h> | |
34 | #include <linux/delay.h> | |
35 | #include <linux/interrupt.h> | |
36 | #include "scsi.h" | |
37 | #include <scsi/scsi_host.h> | |
38 | #include <linux/libata.h> | |
39 | ||
40 | #define DRV_NAME "sata_sil" | |
41 | #define DRV_VERSION "0.9" | |
42 | ||
43 | enum { | |
44 | sil_3112 = 0, | |
45 | sil_3114 = 1, | |
46 | ||
47 | SIL_FIFO_R0 = 0x40, | |
48 | SIL_FIFO_W0 = 0x41, | |
49 | SIL_FIFO_R1 = 0x44, | |
50 | SIL_FIFO_W1 = 0x45, | |
51 | SIL_FIFO_R2 = 0x240, | |
52 | SIL_FIFO_W2 = 0x241, | |
53 | SIL_FIFO_R3 = 0x244, | |
54 | SIL_FIFO_W3 = 0x245, | |
55 | ||
56 | SIL_SYSCFG = 0x48, | |
57 | SIL_MASK_IDE0_INT = (1 << 22), | |
58 | SIL_MASK_IDE1_INT = (1 << 23), | |
59 | SIL_MASK_IDE2_INT = (1 << 24), | |
60 | SIL_MASK_IDE3_INT = (1 << 25), | |
61 | SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT, | |
62 | SIL_MASK_4PORT = SIL_MASK_2PORT | | |
63 | SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, | |
64 | ||
65 | SIL_IDE2_BMDMA = 0x200, | |
66 | ||
67 | SIL_INTR_STEERING = (1 << 1), | |
68 | SIL_QUIRK_MOD15WRITE = (1 << 0), | |
69 | SIL_QUIRK_UDMA5MAX = (1 << 1), | |
70 | }; | |
71 | ||
72 | static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); | |
73 | static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); | |
74 | static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); | |
75 | static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); | |
76 | static void sil_post_set_mode (struct ata_port *ap); | |
77 | ||
78 | static struct pci_device_id sil_pci_tbl[] = { | |
79 | { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, | |
80 | { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, | |
81 | { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, | |
82 | { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, | |
83 | { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, | |
84 | { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, | |
525a0997 | 85 | { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, |
1da177e4 LT |
86 | { } /* terminate list */ |
87 | }; | |
88 | ||
89 | ||
90 | /* TODO firmware versions should be added - eric */ | |
91 | static const struct sil_drivelist { | |
92 | const char * product; | |
93 | unsigned int quirk; | |
94 | } sil_blacklist [] = { | |
95 | { "ST320012AS", SIL_QUIRK_MOD15WRITE }, | |
96 | { "ST330013AS", SIL_QUIRK_MOD15WRITE }, | |
97 | { "ST340017AS", SIL_QUIRK_MOD15WRITE }, | |
98 | { "ST360015AS", SIL_QUIRK_MOD15WRITE }, | |
99 | { "ST380013AS", SIL_QUIRK_MOD15WRITE }, | |
100 | { "ST380023AS", SIL_QUIRK_MOD15WRITE }, | |
101 | { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, | |
102 | { "ST3160023AS", SIL_QUIRK_MOD15WRITE }, | |
103 | { "ST3120026AS", SIL_QUIRK_MOD15WRITE }, | |
104 | { "ST3200822AS", SIL_QUIRK_MOD15WRITE }, | |
105 | { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, | |
106 | { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, | |
107 | { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, | |
108 | { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, | |
109 | { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, | |
110 | { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, | |
111 | { } | |
112 | }; | |
113 | ||
114 | static struct pci_driver sil_pci_driver = { | |
115 | .name = DRV_NAME, | |
116 | .id_table = sil_pci_tbl, | |
117 | .probe = sil_init_one, | |
118 | .remove = ata_pci_remove_one, | |
119 | }; | |
120 | ||
121 | static Scsi_Host_Template sil_sht = { | |
122 | .module = THIS_MODULE, | |
123 | .name = DRV_NAME, | |
124 | .ioctl = ata_scsi_ioctl, | |
125 | .queuecommand = ata_scsi_queuecmd, | |
126 | .eh_strategy_handler = ata_scsi_error, | |
127 | .can_queue = ATA_DEF_QUEUE, | |
128 | .this_id = ATA_SHT_THIS_ID, | |
129 | .sg_tablesize = LIBATA_MAX_PRD, | |
130 | .max_sectors = ATA_MAX_SECTORS, | |
131 | .cmd_per_lun = ATA_SHT_CMD_PER_LUN, | |
132 | .emulated = ATA_SHT_EMULATED, | |
133 | .use_clustering = ATA_SHT_USE_CLUSTERING, | |
134 | .proc_name = DRV_NAME, | |
135 | .dma_boundary = ATA_DMA_BOUNDARY, | |
136 | .slave_configure = ata_scsi_slave_config, | |
137 | .bios_param = ata_std_bios_param, | |
138 | .ordered_flush = 1, | |
139 | }; | |
140 | ||
141 | static struct ata_port_operations sil_ops = { | |
142 | .port_disable = ata_port_disable, | |
143 | .dev_config = sil_dev_config, | |
144 | .tf_load = ata_tf_load, | |
145 | .tf_read = ata_tf_read, | |
146 | .check_status = ata_check_status, | |
147 | .exec_command = ata_exec_command, | |
148 | .dev_select = ata_std_dev_select, | |
149 | .phy_reset = sata_phy_reset, | |
150 | .post_set_mode = sil_post_set_mode, | |
151 | .bmdma_setup = ata_bmdma_setup, | |
152 | .bmdma_start = ata_bmdma_start, | |
153 | .bmdma_stop = ata_bmdma_stop, | |
154 | .bmdma_status = ata_bmdma_status, | |
155 | .qc_prep = ata_qc_prep, | |
156 | .qc_issue = ata_qc_issue_prot, | |
157 | .eng_timeout = ata_eng_timeout, | |
158 | .irq_handler = ata_interrupt, | |
159 | .irq_clear = ata_bmdma_irq_clear, | |
160 | .scr_read = sil_scr_read, | |
161 | .scr_write = sil_scr_write, | |
162 | .port_start = ata_port_start, | |
163 | .port_stop = ata_port_stop, | |
aa8f0dc6 | 164 | .host_stop = ata_host_stop, |
1da177e4 LT |
165 | }; |
166 | ||
167 | static struct ata_port_info sil_port_info[] = { | |
168 | /* sil_3112 */ | |
169 | { | |
170 | .sht = &sil_sht, | |
171 | .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | | |
172 | ATA_FLAG_SRST | ATA_FLAG_MMIO, | |
173 | .pio_mask = 0x1f, /* pio0-4 */ | |
174 | .mwdma_mask = 0x07, /* mwdma0-2 */ | |
175 | .udma_mask = 0x3f, /* udma0-5 */ | |
176 | .port_ops = &sil_ops, | |
177 | }, /* sil_3114 */ | |
178 | { | |
179 | .sht = &sil_sht, | |
180 | .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | | |
181 | ATA_FLAG_SRST | ATA_FLAG_MMIO, | |
182 | .pio_mask = 0x1f, /* pio0-4 */ | |
183 | .mwdma_mask = 0x07, /* mwdma0-2 */ | |
184 | .udma_mask = 0x3f, /* udma0-5 */ | |
185 | .port_ops = &sil_ops, | |
186 | }, | |
187 | }; | |
188 | ||
189 | /* per-port register offsets */ | |
190 | /* TODO: we can probably calculate rather than use a table */ | |
191 | static const struct { | |
192 | unsigned long tf; /* ATA taskfile register block */ | |
193 | unsigned long ctl; /* ATA control/altstatus register block */ | |
194 | unsigned long bmdma; /* DMA register block */ | |
195 | unsigned long scr; /* SATA control register block */ | |
196 | unsigned long sien; /* SATA Interrupt Enable register */ | |
197 | unsigned long xfer_mode;/* data transfer mode register */ | |
198 | } sil_port[] = { | |
199 | /* port 0 ... */ | |
200 | { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 }, | |
201 | { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 }, | |
202 | { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 }, | |
203 | { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 }, | |
204 | /* ... port 3 */ | |
205 | }; | |
206 | ||
207 | MODULE_AUTHOR("Jeff Garzik"); | |
208 | MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller"); | |
209 | MODULE_LICENSE("GPL"); | |
210 | MODULE_DEVICE_TABLE(pci, sil_pci_tbl); | |
211 | MODULE_VERSION(DRV_VERSION); | |
212 | ||
213 | static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) | |
214 | { | |
215 | u8 cache_line = 0; | |
216 | pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line); | |
217 | return cache_line; | |
218 | } | |
219 | ||
220 | static void sil_post_set_mode (struct ata_port *ap) | |
221 | { | |
222 | struct ata_host_set *host_set = ap->host_set; | |
223 | struct ata_device *dev; | |
224 | void *addr = host_set->mmio_base + sil_port[ap->port_no].xfer_mode; | |
225 | u32 tmp, dev_mode[2]; | |
226 | unsigned int i; | |
227 | ||
228 | for (i = 0; i < 2; i++) { | |
229 | dev = &ap->device[i]; | |
230 | if (!ata_dev_present(dev)) | |
231 | dev_mode[i] = 0; /* PIO0/1/2 */ | |
232 | else if (dev->flags & ATA_DFLAG_PIO) | |
233 | dev_mode[i] = 1; /* PIO3/4 */ | |
234 | else | |
235 | dev_mode[i] = 3; /* UDMA */ | |
236 | /* value 2 indicates MDMA */ | |
237 | } | |
238 | ||
239 | tmp = readl(addr); | |
240 | tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0)); | |
241 | tmp |= dev_mode[0]; | |
242 | tmp |= (dev_mode[1] << 4); | |
243 | writel(tmp, addr); | |
244 | readl(addr); /* flush */ | |
245 | } | |
246 | ||
247 | static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_reg) | |
248 | { | |
249 | unsigned long offset = ap->ioaddr.scr_addr; | |
250 | ||
251 | switch (sc_reg) { | |
252 | case SCR_STATUS: | |
253 | return offset + 4; | |
254 | case SCR_ERROR: | |
255 | return offset + 8; | |
256 | case SCR_CONTROL: | |
257 | return offset; | |
258 | default: | |
259 | /* do nothing */ | |
260 | break; | |
261 | } | |
262 | ||
263 | return 0; | |
264 | } | |
265 | ||
266 | static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) | |
267 | { | |
268 | void *mmio = (void *) sil_scr_addr(ap, sc_reg); | |
269 | if (mmio) | |
270 | return readl(mmio); | |
271 | return 0xffffffffU; | |
272 | } | |
273 | ||
274 | static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) | |
275 | { | |
276 | void *mmio = (void *) sil_scr_addr(ap, sc_reg); | |
277 | if (mmio) | |
278 | writel(val, mmio); | |
279 | } | |
280 | ||
281 | /** | |
282 | * sil_dev_config - Apply device/host-specific errata fixups | |
283 | * @ap: Port containing device to be examined | |
284 | * @dev: Device to be examined | |
285 | * | |
286 | * After the IDENTIFY [PACKET] DEVICE step is complete, and a | |
287 | * device is known to be present, this function is called. | |
288 | * We apply two errata fixups which are specific to Silicon Image, | |
289 | * a Seagate and a Maxtor fixup. | |
290 | * | |
291 | * For certain Seagate devices, we must limit the maximum sectors | |
292 | * to under 8K. | |
293 | * | |
294 | * For certain Maxtor devices, we must not program the drive | |
295 | * beyond udma5. | |
296 | * | |
297 | * Both fixups are unfairly pessimistic. As soon as I get more | |
298 | * information on these errata, I will create a more exhaustive | |
299 | * list, and apply the fixups to only the specific | |
300 | * devices/hosts/firmwares that need it. | |
301 | * | |
302 | * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted | |
303 | * The Maxtor quirk is in the blacklist, but I'm keeping the original | |
304 | * pessimistic fix for the following reasons... | |
305 | * - There seems to be less info on it, only one device gleaned off the | |
306 | * Windows driver, maybe only one is affected. More info would be greatly | |
307 | * appreciated. | |
308 | * - But then again UDMA5 is hardly anything to complain about | |
309 | */ | |
310 | static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) | |
311 | { | |
312 | unsigned int n, quirks = 0; | |
313 | unsigned char model_num[40]; | |
314 | const char *s; | |
315 | unsigned int len; | |
316 | ||
317 | ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS, | |
318 | sizeof(model_num)); | |
319 | s = &model_num[0]; | |
320 | len = strnlen(s, sizeof(model_num)); | |
321 | ||
322 | /* ATAPI specifies that empty space is blank-filled; remove blanks */ | |
323 | while ((len > 0) && (s[len - 1] == ' ')) | |
324 | len--; | |
325 | ||
8a60a071 | 326 | for (n = 0; sil_blacklist[n].product; n++) |
1da177e4 LT |
327 | if (!memcmp(sil_blacklist[n].product, s, |
328 | strlen(sil_blacklist[n].product))) { | |
329 | quirks = sil_blacklist[n].quirk; | |
330 | break; | |
331 | } | |
8a60a071 | 332 | |
1da177e4 LT |
333 | /* limit requests to 15 sectors */ |
334 | if (quirks & SIL_QUIRK_MOD15WRITE) { | |
335 | printk(KERN_INFO "ata%u(%u): applying Seagate errata fix\n", | |
336 | ap->id, dev->devno); | |
337 | ap->host->max_sectors = 15; | |
338 | ap->host->hostt->max_sectors = 15; | |
339 | dev->flags |= ATA_DFLAG_LOCK_SECTORS; | |
340 | return; | |
341 | } | |
342 | ||
343 | /* limit to udma5 */ | |
344 | if (quirks & SIL_QUIRK_UDMA5MAX) { | |
345 | printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n", | |
346 | ap->id, dev->devno, s); | |
347 | ap->udma_mask &= ATA_UDMA5; | |
348 | return; | |
349 | } | |
350 | } | |
351 | ||
352 | static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) | |
353 | { | |
354 | static int printed_version; | |
355 | struct ata_probe_ent *probe_ent = NULL; | |
356 | unsigned long base; | |
357 | void *mmio_base; | |
358 | int rc; | |
359 | unsigned int i; | |
360 | int pci_dev_busy = 0; | |
361 | u32 tmp, irq_mask; | |
362 | u8 cls; | |
363 | ||
364 | if (!printed_version++) | |
365 | printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); | |
366 | ||
367 | /* | |
368 | * If this driver happens to only be useful on Apple's K2, then | |
369 | * we should check that here as it has a normal Serverworks ID | |
370 | */ | |
371 | rc = pci_enable_device(pdev); | |
372 | if (rc) | |
373 | return rc; | |
374 | ||
375 | rc = pci_request_regions(pdev, DRV_NAME); | |
376 | if (rc) { | |
377 | pci_dev_busy = 1; | |
378 | goto err_out; | |
379 | } | |
380 | ||
381 | rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); | |
382 | if (rc) | |
383 | goto err_out_regions; | |
384 | rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); | |
385 | if (rc) | |
386 | goto err_out_regions; | |
387 | ||
388 | probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); | |
389 | if (probe_ent == NULL) { | |
390 | rc = -ENOMEM; | |
391 | goto err_out_regions; | |
392 | } | |
393 | ||
394 | memset(probe_ent, 0, sizeof(*probe_ent)); | |
395 | INIT_LIST_HEAD(&probe_ent->node); | |
396 | probe_ent->dev = pci_dev_to_dev(pdev); | |
397 | probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops; | |
398 | probe_ent->sht = sil_port_info[ent->driver_data].sht; | |
399 | probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2; | |
400 | probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask; | |
401 | probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask; | |
402 | probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask; | |
403 | probe_ent->irq = pdev->irq; | |
404 | probe_ent->irq_flags = SA_SHIRQ; | |
405 | probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags; | |
406 | ||
407 | mmio_base = ioremap(pci_resource_start(pdev, 5), | |
408 | pci_resource_len(pdev, 5)); | |
409 | if (mmio_base == NULL) { | |
410 | rc = -ENOMEM; | |
411 | goto err_out_free_ent; | |
412 | } | |
413 | ||
414 | probe_ent->mmio_base = mmio_base; | |
415 | ||
416 | base = (unsigned long) mmio_base; | |
417 | ||
418 | for (i = 0; i < probe_ent->n_ports; i++) { | |
419 | probe_ent->port[i].cmd_addr = base + sil_port[i].tf; | |
420 | probe_ent->port[i].altstatus_addr = | |
421 | probe_ent->port[i].ctl_addr = base + sil_port[i].ctl; | |
422 | probe_ent->port[i].bmdma_addr = base + sil_port[i].bmdma; | |
423 | probe_ent->port[i].scr_addr = base + sil_port[i].scr; | |
424 | ata_std_ports(&probe_ent->port[i]); | |
425 | } | |
426 | ||
427 | /* Initialize FIFO PCI bus arbitration */ | |
428 | cls = sil_get_device_cache_line(pdev); | |
429 | if (cls) { | |
430 | cls >>= 3; | |
431 | cls++; /* cls = (line_size/8)+1 */ | |
432 | writeb(cls, mmio_base + SIL_FIFO_R0); | |
433 | writeb(cls, mmio_base + SIL_FIFO_W0); | |
434 | writeb(cls, mmio_base + SIL_FIFO_R1); | |
e1dd23a0 JA |
435 | writeb(cls, mmio_base + SIL_FIFO_W1); |
436 | if (ent->driver_data == sil_3114) { | |
437 | writeb(cls, mmio_base + SIL_FIFO_R2); | |
438 | writeb(cls, mmio_base + SIL_FIFO_W2); | |
439 | writeb(cls, mmio_base + SIL_FIFO_R3); | |
440 | writeb(cls, mmio_base + SIL_FIFO_W3); | |
441 | } | |
1da177e4 LT |
442 | } else |
443 | printk(KERN_WARNING DRV_NAME "(%s): cache line size not set. Driver may not function\n", | |
444 | pci_name(pdev)); | |
445 | ||
446 | if (ent->driver_data == sil_3114) { | |
447 | irq_mask = SIL_MASK_4PORT; | |
448 | ||
449 | /* flip the magic "make 4 ports work" bit */ | |
450 | tmp = readl(mmio_base + SIL_IDE2_BMDMA); | |
451 | if ((tmp & SIL_INTR_STEERING) == 0) | |
452 | writel(tmp | SIL_INTR_STEERING, | |
453 | mmio_base + SIL_IDE2_BMDMA); | |
454 | ||
455 | } else { | |
456 | irq_mask = SIL_MASK_2PORT; | |
457 | } | |
458 | ||
459 | /* make sure IDE0/1/2/3 interrupts are not masked */ | |
460 | tmp = readl(mmio_base + SIL_SYSCFG); | |
461 | if (tmp & irq_mask) { | |
462 | tmp &= ~irq_mask; | |
463 | writel(tmp, mmio_base + SIL_SYSCFG); | |
464 | readl(mmio_base + SIL_SYSCFG); /* flush */ | |
465 | } | |
466 | ||
467 | /* mask all SATA phy-related interrupts */ | |
468 | /* TODO: unmask bit 6 (SError N bit) for hotplug */ | |
469 | for (i = 0; i < probe_ent->n_ports; i++) | |
470 | writel(0, mmio_base + sil_port[i].sien); | |
471 | ||
472 | pci_set_master(pdev); | |
473 | ||
474 | /* FIXME: check ata_device_add return value */ | |
475 | ata_device_add(probe_ent); | |
476 | kfree(probe_ent); | |
477 | ||
478 | return 0; | |
479 | ||
480 | err_out_free_ent: | |
481 | kfree(probe_ent); | |
482 | err_out_regions: | |
483 | pci_release_regions(pdev); | |
484 | err_out: | |
485 | if (!pci_dev_busy) | |
486 | pci_disable_device(pdev); | |
487 | return rc; | |
488 | } | |
489 | ||
490 | static int __init sil_init(void) | |
491 | { | |
492 | return pci_module_init(&sil_pci_driver); | |
493 | } | |
494 | ||
495 | static void __exit sil_exit(void) | |
496 | { | |
497 | pci_unregister_driver(&sil_pci_driver); | |
498 | } | |
499 | ||
500 | ||
501 | module_init(sil_init); | |
502 | module_exit(sil_exit); |