Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*====================================================================== |
2 | ||
3 | NinjaSCSI-3 / NinjaSCSI-32Bi PCMCIA SCSI host adapter card driver | |
4 | By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> | |
5 | ||
6 | Ver.2.8 Support 32bit MMIO mode | |
7 | Support Synchronous Data Transfer Request (SDTR) mode | |
8 | Ver.2.0 Support 32bit PIO mode | |
9 | Ver.1.1.2 Fix for scatter list buffer exceeds | |
10 | Ver.1.1 Support scatter list | |
11 | Ver.0.1 Initial version | |
12 | ||
13 | This software may be used and distributed according to the terms of | |
14 | the GNU General Public License. | |
15 | ||
16 | ======================================================================*/ | |
17 | ||
18 | /*********************************************************************** | |
19 | This driver is for these PCcards. | |
20 | ||
21 | I-O DATA PCSC-F (Workbit NinjaSCSI-3) | |
22 | "WBT", "NinjaSCSI-3", "R1.0" | |
23 | I-O DATA CBSC-II (Workbit NinjaSCSI-32Bi in 16bit mode) | |
24 | "IO DATA", "CBSC16 ", "1" | |
25 | ||
26 | ***********************************************************************/ | |
27 | ||
1da177e4 LT |
28 | #include <linux/module.h> |
29 | #include <linux/kernel.h> | |
30 | #include <linux/init.h> | |
1da177e4 LT |
31 | #include <linux/slab.h> |
32 | #include <linux/string.h> | |
33 | #include <linux/timer.h> | |
34 | #include <linux/ioport.h> | |
35 | #include <linux/delay.h> | |
36 | #include <linux/interrupt.h> | |
37 | #include <linux/major.h> | |
38 | #include <linux/blkdev.h> | |
39 | #include <linux/stat.h> | |
40 | ||
41 | #include <asm/io.h> | |
42 | #include <asm/irq.h> | |
43 | ||
44 | #include <../drivers/scsi/scsi.h> | |
45 | #include <scsi/scsi_host.h> | |
46 | ||
47 | #include <scsi/scsi.h> | |
48 | #include <scsi/scsi_ioctl.h> | |
49 | ||
1da177e4 LT |
50 | #include <pcmcia/cistpl.h> |
51 | #include <pcmcia/cisreg.h> | |
52 | #include <pcmcia/ds.h> | |
53 | ||
54 | #include "nsp_cs.h" | |
55 | ||
56 | MODULE_AUTHOR("YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>"); | |
774251ef | 57 | MODULE_DESCRIPTION("WorkBit NinjaSCSI-3 / NinjaSCSI-32Bi(16bit) PCMCIA SCSI host adapter module"); |
1da177e4 LT |
58 | MODULE_SUPPORTED_DEVICE("sd,sr,sg,st"); |
59 | #ifdef MODULE_LICENSE | |
60 | MODULE_LICENSE("GPL"); | |
61 | #endif | |
62 | ||
63 | #include "nsp_io.h" | |
64 | ||
65 | /*====================================================================*/ | |
66 | /* Parameters that can be set with 'insmod' */ | |
67 | ||
68 | static int nsp_burst_mode = BURST_MEM32; | |
69 | module_param(nsp_burst_mode, int, 0); | |
70 | MODULE_PARM_DESC(nsp_burst_mode, "Burst transfer mode (0=io8, 1=io32, 2=mem32(default))"); | |
71 | ||
72 | /* Release IO ports after configuration? */ | |
73 | static int free_ports = 0; | |
74 | module_param(free_ports, bool, 0); | |
75 | MODULE_PARM_DESC(free_ports, "Release IO ports after configuration? (default: 0 (=no))"); | |
76 | ||
d0be4a7d | 77 | static struct scsi_host_template nsp_driver_template = { |
1da177e4 LT |
78 | .proc_name = "nsp_cs", |
79 | .proc_info = nsp_proc_info, | |
80 | .name = "WorkBit NinjaSCSI-3/32Bi(16bit)", | |
1da177e4 LT |
81 | .info = nsp_info, |
82 | .queuecommand = nsp_queuecommand, | |
1da177e4 | 83 | /* .eh_abort_handler = nsp_eh_abort,*/ |
1da177e4 LT |
84 | .eh_bus_reset_handler = nsp_eh_bus_reset, |
85 | .eh_host_reset_handler = nsp_eh_host_reset, | |
86 | .can_queue = 1, | |
87 | .this_id = NSP_INITIATOR_ID, | |
88 | .sg_tablesize = SG_ALL, | |
89 | .cmd_per_lun = 1, | |
90 | .use_clustering = DISABLE_CLUSTERING, | |
1da177e4 LT |
91 | }; |
92 | ||
1da177e4 LT |
93 | static nsp_hw_data nsp_data_base; /* attach <-> detect glue */ |
94 | ||
95 | ||
96 | ||
97 | /* | |
98 | * debug, error print | |
99 | */ | |
100 | #ifndef NSP_DEBUG | |
101 | # define NSP_DEBUG_MASK 0x000000 | |
102 | # define nsp_msg(type, args...) nsp_cs_message("", 0, (type), args) | |
103 | # define nsp_dbg(mask, args...) /* */ | |
104 | #else | |
105 | # define NSP_DEBUG_MASK 0xffffff | |
106 | # define nsp_msg(type, args...) \ | |
cadbd4a5 | 107 | nsp_cs_message (__func__, __LINE__, (type), args) |
1da177e4 | 108 | # define nsp_dbg(mask, args...) \ |
cadbd4a5 | 109 | nsp_cs_dmessage(__func__, __LINE__, (mask), args) |
1da177e4 LT |
110 | #endif |
111 | ||
112 | #define NSP_DEBUG_QUEUECOMMAND BIT(0) | |
113 | #define NSP_DEBUG_REGISTER BIT(1) | |
114 | #define NSP_DEBUG_AUTOSCSI BIT(2) | |
115 | #define NSP_DEBUG_INTR BIT(3) | |
116 | #define NSP_DEBUG_SGLIST BIT(4) | |
117 | #define NSP_DEBUG_BUSFREE BIT(5) | |
118 | #define NSP_DEBUG_CDB_CONTENTS BIT(6) | |
119 | #define NSP_DEBUG_RESELECTION BIT(7) | |
120 | #define NSP_DEBUG_MSGINOCCUR BIT(8) | |
121 | #define NSP_DEBUG_EEPROM BIT(9) | |
122 | #define NSP_DEBUG_MSGOUTOCCUR BIT(10) | |
123 | #define NSP_DEBUG_BUSRESET BIT(11) | |
124 | #define NSP_DEBUG_RESTART BIT(12) | |
125 | #define NSP_DEBUG_SYNC BIT(13) | |
126 | #define NSP_DEBUG_WAIT BIT(14) | |
127 | #define NSP_DEBUG_TARGETFLAG BIT(15) | |
128 | #define NSP_DEBUG_PROC BIT(16) | |
129 | #define NSP_DEBUG_INIT BIT(17) | |
130 | #define NSP_DEBUG_DATA_IO BIT(18) | |
131 | #define NSP_SPECIAL_PRINT_REGISTER BIT(20) | |
132 | ||
133 | #define NSP_DEBUG_BUF_LEN 150 | |
134 | ||
040cd232 BH |
135 | static inline void nsp_inc_resid(struct scsi_cmnd *SCpnt, int residInc) |
136 | { | |
137 | scsi_set_resid(SCpnt, scsi_get_resid(SCpnt) + residInc); | |
138 | } | |
139 | ||
1da177e4 LT |
140 | static void nsp_cs_message(const char *func, int line, char *type, char *fmt, ...) |
141 | { | |
142 | va_list args; | |
143 | char buf[NSP_DEBUG_BUF_LEN]; | |
144 | ||
145 | va_start(args, fmt); | |
146 | vsnprintf(buf, sizeof(buf), fmt, args); | |
147 | va_end(args); | |
148 | ||
149 | #ifndef NSP_DEBUG | |
150 | printk("%snsp_cs: %s\n", type, buf); | |
151 | #else | |
152 | printk("%snsp_cs: %s (%d): %s\n", type, func, line, buf); | |
153 | #endif | |
154 | } | |
155 | ||
156 | #ifdef NSP_DEBUG | |
157 | static void nsp_cs_dmessage(const char *func, int line, int mask, char *fmt, ...) | |
158 | { | |
159 | va_list args; | |
160 | char buf[NSP_DEBUG_BUF_LEN]; | |
161 | ||
162 | va_start(args, fmt); | |
163 | vsnprintf(buf, sizeof(buf), fmt, args); | |
164 | va_end(args); | |
165 | ||
166 | if (mask & NSP_DEBUG_MASK) { | |
167 | printk("nsp_cs-debug: 0x%x %s (%d): %s\n", mask, func, line, buf); | |
168 | } | |
169 | } | |
170 | #endif | |
171 | ||
172 | /***********************************************************/ | |
173 | ||
174 | /*==================================================== | |
175 | * Clenaup parameters and call done() functions. | |
176 | * You must be set SCpnt->result before call this function. | |
177 | */ | |
0fc82d5e | 178 | static void nsp_scsi_done(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
179 | { |
180 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
181 | ||
182 | data->CurrentSC = NULL; | |
183 | ||
184 | SCpnt->scsi_done(SCpnt); | |
185 | } | |
186 | ||
0fc82d5e HK |
187 | static int nsp_queuecommand(struct scsi_cmnd *SCpnt, |
188 | void (*done)(struct scsi_cmnd *)) | |
1da177e4 LT |
189 | { |
190 | #ifdef NSP_DEBUG | |
191 | /*unsigned int host_id = SCpnt->device->host->this_id;*/ | |
192 | /*unsigned int base = SCpnt->device->host->io_port;*/ | |
422c0d61 | 193 | unsigned char target = scmd_id(SCpnt); |
1da177e4 LT |
194 | #endif |
195 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
196 | ||
040cd232 BH |
197 | nsp_dbg(NSP_DEBUG_QUEUECOMMAND, |
198 | "SCpnt=0x%p target=%d lun=%d sglist=0x%p bufflen=%d sg_count=%d", | |
199 | SCpnt, target, SCpnt->device->lun, scsi_sglist(SCpnt), | |
200 | scsi_bufflen(SCpnt), scsi_sg_count(SCpnt)); | |
1da177e4 LT |
201 | //nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "before CurrentSC=0x%p", data->CurrentSC); |
202 | ||
203 | SCpnt->scsi_done = done; | |
204 | ||
205 | if (data->CurrentSC != NULL) { | |
206 | nsp_msg(KERN_DEBUG, "CurrentSC!=NULL this can't be happen"); | |
207 | SCpnt->result = DID_BAD_TARGET << 16; | |
208 | nsp_scsi_done(SCpnt); | |
209 | return 0; | |
210 | } | |
211 | ||
212 | #if 0 | |
213 | /* XXX: pcmcia-cs generates SCSI command with "scsi_info" utility. | |
214 | This makes kernel crash when suspending... */ | |
215 | if (data->ScsiInfo->stop != 0) { | |
216 | nsp_msg(KERN_INFO, "suspending device. reject command."); | |
217 | SCpnt->result = DID_BAD_TARGET << 16; | |
218 | nsp_scsi_done(SCpnt); | |
219 | return SCSI_MLQUEUE_HOST_BUSY; | |
220 | } | |
221 | #endif | |
222 | ||
223 | show_command(SCpnt); | |
224 | ||
225 | data->CurrentSC = SCpnt; | |
226 | ||
227 | SCpnt->SCp.Status = CHECK_CONDITION; | |
228 | SCpnt->SCp.Message = 0; | |
229 | SCpnt->SCp.have_data_in = IO_UNKNOWN; | |
230 | SCpnt->SCp.sent_command = 0; | |
231 | SCpnt->SCp.phase = PH_UNDETERMINED; | |
040cd232 | 232 | scsi_set_resid(SCpnt, scsi_bufflen(SCpnt)); |
1da177e4 LT |
233 | |
234 | /* setup scratch area | |
235 | SCp.ptr : buffer pointer | |
236 | SCp.this_residual : buffer length | |
237 | SCp.buffer : next buffer | |
238 | SCp.buffers_residual : left buffers in list | |
239 | SCp.phase : current state of the command */ | |
040cd232 BH |
240 | if (scsi_bufflen(SCpnt)) { |
241 | SCpnt->SCp.buffer = scsi_sglist(SCpnt); | |
1da177e4 LT |
242 | SCpnt->SCp.ptr = BUFFER_ADDR; |
243 | SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length; | |
040cd232 | 244 | SCpnt->SCp.buffers_residual = scsi_sg_count(SCpnt) - 1; |
1da177e4 | 245 | } else { |
040cd232 BH |
246 | SCpnt->SCp.ptr = NULL; |
247 | SCpnt->SCp.this_residual = 0; | |
1da177e4 LT |
248 | SCpnt->SCp.buffer = NULL; |
249 | SCpnt->SCp.buffers_residual = 0; | |
250 | } | |
251 | ||
252 | if (nsphw_start_selection(SCpnt) == FALSE) { | |
253 | nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "selection fail"); | |
254 | SCpnt->result = DID_BUS_BUSY << 16; | |
255 | nsp_scsi_done(SCpnt); | |
256 | return 0; | |
257 | } | |
258 | ||
259 | ||
260 | //nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "out"); | |
261 | #ifdef NSP_DEBUG | |
262 | data->CmdId++; | |
263 | #endif | |
264 | return 0; | |
265 | } | |
266 | ||
267 | /* | |
268 | * setup PIO FIFO transfer mode and enable/disable to data out | |
269 | */ | |
270 | static void nsp_setup_fifo(nsp_hw_data *data, int enabled) | |
271 | { | |
272 | unsigned int base = data->BaseAddress; | |
273 | unsigned char transfer_mode_reg; | |
274 | ||
275 | //nsp_dbg(NSP_DEBUG_DATA_IO, "enabled=%d", enabled); | |
276 | ||
277 | if (enabled != FALSE) { | |
278 | transfer_mode_reg = TRANSFER_GO | BRAIND; | |
279 | } else { | |
280 | transfer_mode_reg = 0; | |
281 | } | |
282 | ||
283 | transfer_mode_reg |= data->TransferMode; | |
284 | ||
285 | nsp_index_write(base, TRANSFERMODE, transfer_mode_reg); | |
286 | } | |
287 | ||
288 | static void nsphw_init_sync(nsp_hw_data *data) | |
289 | { | |
290 | sync_data tmp_sync = { .SyncNegotiation = SYNC_NOT_YET, | |
291 | .SyncPeriod = 0, | |
292 | .SyncOffset = 0 | |
293 | }; | |
294 | int i; | |
295 | ||
296 | /* setup sync data */ | |
297 | for ( i = 0; i < ARRAY_SIZE(data->Sync); i++ ) { | |
298 | data->Sync[i] = tmp_sync; | |
299 | } | |
300 | } | |
301 | ||
302 | /* | |
303 | * Initialize Ninja hardware | |
304 | */ | |
305 | static int nsphw_init(nsp_hw_data *data) | |
306 | { | |
307 | unsigned int base = data->BaseAddress; | |
308 | ||
309 | nsp_dbg(NSP_DEBUG_INIT, "in base=0x%x", base); | |
310 | ||
311 | data->ScsiClockDiv = CLOCK_40M | FAST_20; | |
312 | data->CurrentSC = NULL; | |
313 | data->FifoCount = 0; | |
314 | data->TransferMode = MODE_IO8; | |
315 | ||
316 | nsphw_init_sync(data); | |
317 | ||
318 | /* block all interrupts */ | |
319 | nsp_write(base, IRQCONTROL, IRQCONTROL_ALLMASK); | |
320 | ||
321 | /* setup SCSI interface */ | |
322 | nsp_write(base, IFSELECT, IF_IFSEL); | |
323 | ||
324 | nsp_index_write(base, SCSIIRQMODE, 0); | |
325 | ||
326 | nsp_index_write(base, TRANSFERMODE, MODE_IO8); | |
327 | nsp_index_write(base, CLOCKDIV, data->ScsiClockDiv); | |
328 | ||
329 | nsp_index_write(base, PARITYCTRL, 0); | |
330 | nsp_index_write(base, POINTERCLR, POINTER_CLEAR | | |
331 | ACK_COUNTER_CLEAR | | |
332 | REQ_COUNTER_CLEAR | | |
333 | HOST_COUNTER_CLEAR); | |
334 | ||
335 | /* setup fifo asic */ | |
336 | nsp_write(base, IFSELECT, IF_REGSEL); | |
337 | nsp_index_write(base, TERMPWRCTRL, 0); | |
338 | if ((nsp_index_read(base, OTHERCONTROL) & TPWR_SENSE) == 0) { | |
339 | nsp_msg(KERN_INFO, "terminator power on"); | |
340 | nsp_index_write(base, TERMPWRCTRL, POWER_ON); | |
341 | } | |
342 | ||
343 | nsp_index_write(base, TIMERCOUNT, 0); | |
344 | nsp_index_write(base, TIMERCOUNT, 0); /* requires 2 times!! */ | |
345 | ||
346 | nsp_index_write(base, SYNCREG, 0); | |
347 | nsp_index_write(base, ACKWIDTH, 0); | |
348 | ||
349 | /* enable interrupts and ack them */ | |
350 | nsp_index_write(base, SCSIIRQMODE, SCSI_PHASE_CHANGE_EI | | |
351 | RESELECT_EI | | |
352 | SCSI_RESET_IRQ_EI ); | |
353 | nsp_write(base, IRQCONTROL, IRQCONTROL_ALLCLEAR); | |
354 | ||
355 | nsp_setup_fifo(data, FALSE); | |
356 | ||
357 | return TRUE; | |
358 | } | |
359 | ||
360 | /* | |
361 | * Start selection phase | |
362 | */ | |
0fc82d5e | 363 | static int nsphw_start_selection(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
364 | { |
365 | unsigned int host_id = SCpnt->device->host->this_id; | |
366 | unsigned int base = SCpnt->device->host->io_port; | |
422c0d61 | 367 | unsigned char target = scmd_id(SCpnt); |
1da177e4 LT |
368 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; |
369 | int time_out; | |
370 | unsigned char phase, arbit; | |
371 | ||
372 | //nsp_dbg(NSP_DEBUG_RESELECTION, "in"); | |
373 | ||
374 | phase = nsp_index_read(base, SCSIBUSMON); | |
375 | if(phase != BUSMON_BUS_FREE) { | |
376 | //nsp_dbg(NSP_DEBUG_RESELECTION, "bus busy"); | |
377 | return FALSE; | |
378 | } | |
379 | ||
380 | /* start arbitration */ | |
381 | //nsp_dbg(NSP_DEBUG_RESELECTION, "start arbit"); | |
382 | SCpnt->SCp.phase = PH_ARBSTART; | |
383 | nsp_index_write(base, SETARBIT, ARBIT_GO); | |
384 | ||
385 | time_out = 1000; | |
386 | do { | |
387 | /* XXX: what a stupid chip! */ | |
388 | arbit = nsp_index_read(base, ARBITSTATUS); | |
389 | //nsp_dbg(NSP_DEBUG_RESELECTION, "arbit=%d, wait_count=%d", arbit, wait_count); | |
390 | udelay(1); /* hold 1.2us */ | |
391 | } while((arbit & (ARBIT_WIN | ARBIT_FAIL)) == 0 && | |
392 | (time_out-- != 0)); | |
393 | ||
394 | if (!(arbit & ARBIT_WIN)) { | |
395 | //nsp_dbg(NSP_DEBUG_RESELECTION, "arbit fail"); | |
396 | nsp_index_write(base, SETARBIT, ARBIT_FLAG_CLEAR); | |
397 | return FALSE; | |
398 | } | |
399 | ||
400 | /* assert select line */ | |
401 | //nsp_dbg(NSP_DEBUG_RESELECTION, "assert SEL line"); | |
402 | SCpnt->SCp.phase = PH_SELSTART; | |
403 | udelay(3); /* wait 2.4us */ | |
404 | nsp_index_write(base, SCSIDATALATCH, BIT(host_id) | BIT(target)); | |
405 | nsp_index_write(base, SCSIBUSCTRL, SCSI_SEL | SCSI_BSY | SCSI_ATN); | |
406 | udelay(2); /* wait >1.2us */ | |
407 | nsp_index_write(base, SCSIBUSCTRL, SCSI_SEL | SCSI_BSY | SCSI_DATAOUT_ENB | SCSI_ATN); | |
408 | nsp_index_write(base, SETARBIT, ARBIT_FLAG_CLEAR); | |
409 | /*udelay(1);*/ /* wait >90ns */ | |
410 | nsp_index_write(base, SCSIBUSCTRL, SCSI_SEL | SCSI_DATAOUT_ENB | SCSI_ATN); | |
411 | ||
412 | /* check selection timeout */ | |
413 | nsp_start_timer(SCpnt, 1000/51); | |
414 | data->SelectionTimeOut = 1; | |
415 | ||
416 | return TRUE; | |
417 | } | |
418 | ||
419 | struct nsp_sync_table { | |
420 | unsigned int min_period; | |
421 | unsigned int max_period; | |
422 | unsigned int chip_period; | |
423 | unsigned int ack_width; | |
424 | }; | |
425 | ||
426 | static struct nsp_sync_table nsp_sync_table_40M[] = { | |
427 | {0x0c, 0x0c, 0x1, 0}, /* 20MB 50ns*/ | |
428 | {0x19, 0x19, 0x3, 1}, /* 10MB 100ns*/ | |
429 | {0x1a, 0x25, 0x5, 2}, /* 7.5MB 150ns*/ | |
430 | {0x26, 0x32, 0x7, 3}, /* 5MB 200ns*/ | |
431 | { 0, 0, 0, 0}, | |
432 | }; | |
433 | ||
434 | static struct nsp_sync_table nsp_sync_table_20M[] = { | |
435 | {0x19, 0x19, 0x1, 0}, /* 10MB 100ns*/ | |
436 | {0x1a, 0x25, 0x2, 0}, /* 7.5MB 150ns*/ | |
437 | {0x26, 0x32, 0x3, 1}, /* 5MB 200ns*/ | |
438 | { 0, 0, 0, 0}, | |
439 | }; | |
440 | ||
441 | /* | |
442 | * setup synchronous data transfer mode | |
443 | */ | |
0fc82d5e | 444 | static int nsp_analyze_sdtr(struct scsi_cmnd *SCpnt) |
1da177e4 | 445 | { |
422c0d61 | 446 | unsigned char target = scmd_id(SCpnt); |
1da177e4 LT |
447 | // unsigned char lun = SCpnt->device->lun; |
448 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
449 | sync_data *sync = &(data->Sync[target]); | |
450 | struct nsp_sync_table *sync_table; | |
451 | unsigned int period, offset; | |
452 | int i; | |
453 | ||
454 | ||
455 | nsp_dbg(NSP_DEBUG_SYNC, "in"); | |
456 | ||
457 | period = sync->SyncPeriod; | |
458 | offset = sync->SyncOffset; | |
459 | ||
460 | nsp_dbg(NSP_DEBUG_SYNC, "period=0x%x, offset=0x%x", period, offset); | |
461 | ||
462 | if ((data->ScsiClockDiv & (BIT(0)|BIT(1))) == CLOCK_20M) { | |
463 | sync_table = nsp_sync_table_20M; | |
464 | } else { | |
465 | sync_table = nsp_sync_table_40M; | |
466 | } | |
467 | ||
468 | for ( i = 0; sync_table->max_period != 0; i++, sync_table++) { | |
469 | if ( period >= sync_table->min_period && | |
470 | period <= sync_table->max_period ) { | |
471 | break; | |
472 | } | |
473 | } | |
474 | ||
475 | if (period != 0 && sync_table->max_period == 0) { | |
476 | /* | |
477 | * No proper period/offset found | |
478 | */ | |
479 | nsp_dbg(NSP_DEBUG_SYNC, "no proper period/offset"); | |
480 | ||
481 | sync->SyncPeriod = 0; | |
482 | sync->SyncOffset = 0; | |
483 | sync->SyncRegister = 0; | |
484 | sync->AckWidth = 0; | |
485 | ||
486 | return FALSE; | |
487 | } | |
488 | ||
489 | sync->SyncRegister = (sync_table->chip_period << SYNCREG_PERIOD_SHIFT) | | |
490 | (offset & SYNCREG_OFFSET_MASK); | |
491 | sync->AckWidth = sync_table->ack_width; | |
492 | ||
493 | nsp_dbg(NSP_DEBUG_SYNC, "sync_reg=0x%x, ack_width=0x%x", sync->SyncRegister, sync->AckWidth); | |
494 | ||
495 | return TRUE; | |
496 | } | |
497 | ||
498 | ||
499 | /* | |
500 | * start ninja hardware timer | |
501 | */ | |
0fc82d5e | 502 | static void nsp_start_timer(struct scsi_cmnd *SCpnt, int time) |
1da177e4 LT |
503 | { |
504 | unsigned int base = SCpnt->device->host->io_port; | |
505 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
506 | ||
507 | //nsp_dbg(NSP_DEBUG_INTR, "in SCpnt=0x%p, time=%d", SCpnt, time); | |
508 | data->TimerCount = time; | |
509 | nsp_index_write(base, TIMERCOUNT, time); | |
510 | } | |
511 | ||
512 | /* | |
513 | * wait for bus phase change | |
514 | */ | |
0fc82d5e HK |
515 | static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask, |
516 | char *str) | |
1da177e4 LT |
517 | { |
518 | unsigned int base = SCpnt->device->host->io_port; | |
519 | unsigned char reg; | |
520 | int time_out; | |
521 | ||
522 | //nsp_dbg(NSP_DEBUG_INTR, "in"); | |
523 | ||
524 | time_out = 100; | |
525 | ||
526 | do { | |
527 | reg = nsp_index_read(base, SCSIBUSMON); | |
528 | if (reg == 0xff) { | |
529 | break; | |
530 | } | |
0454c740 | 531 | } while ((--time_out != 0) && (reg & mask) != 0); |
1da177e4 LT |
532 | |
533 | if (time_out == 0) { | |
534 | nsp_msg(KERN_DEBUG, " %s signal off timeut", str); | |
535 | } | |
536 | ||
537 | return 0; | |
538 | } | |
539 | ||
540 | /* | |
541 | * expect Ninja Irq | |
542 | */ | |
0fc82d5e HK |
543 | static int nsp_expect_signal(struct scsi_cmnd *SCpnt, |
544 | unsigned char current_phase, | |
545 | unsigned char mask) | |
1da177e4 LT |
546 | { |
547 | unsigned int base = SCpnt->device->host->io_port; | |
548 | int time_out; | |
549 | unsigned char phase, i_src; | |
550 | ||
551 | //nsp_dbg(NSP_DEBUG_INTR, "current_phase=0x%x, mask=0x%x", current_phase, mask); | |
552 | ||
553 | time_out = 100; | |
554 | do { | |
555 | phase = nsp_index_read(base, SCSIBUSMON); | |
556 | if (phase == 0xff) { | |
557 | //nsp_dbg(NSP_DEBUG_INTR, "ret -1"); | |
558 | return -1; | |
559 | } | |
560 | i_src = nsp_read(base, IRQSTATUS); | |
561 | if (i_src & IRQSTATUS_SCSI) { | |
562 | //nsp_dbg(NSP_DEBUG_INTR, "ret 0 found scsi signal"); | |
563 | return 0; | |
564 | } | |
565 | if ((phase & mask) != 0 && (phase & BUSMON_PHASE_MASK) == current_phase) { | |
566 | //nsp_dbg(NSP_DEBUG_INTR, "ret 1 phase=0x%x", phase); | |
567 | return 1; | |
568 | } | |
569 | } while(time_out-- != 0); | |
570 | ||
571 | //nsp_dbg(NSP_DEBUG_INTR, "timeout"); | |
572 | return -1; | |
573 | } | |
574 | ||
575 | /* | |
576 | * transfer SCSI message | |
577 | */ | |
0fc82d5e | 578 | static int nsp_xfer(struct scsi_cmnd *SCpnt, int phase) |
1da177e4 LT |
579 | { |
580 | unsigned int base = SCpnt->device->host->io_port; | |
581 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
582 | char *buf = data->MsgBuffer; | |
583 | int len = min(MSGBUF_SIZE, data->MsgLen); | |
584 | int ptr; | |
585 | int ret; | |
586 | ||
587 | //nsp_dbg(NSP_DEBUG_DATA_IO, "in"); | |
588 | for (ptr = 0; len > 0; len--, ptr++) { | |
589 | ||
590 | ret = nsp_expect_signal(SCpnt, phase, BUSMON_REQ); | |
591 | if (ret <= 0) { | |
592 | nsp_dbg(NSP_DEBUG_DATA_IO, "xfer quit"); | |
593 | return 0; | |
594 | } | |
595 | ||
596 | /* if last byte, negate ATN */ | |
597 | if (len == 1 && SCpnt->SCp.phase == PH_MSG_OUT) { | |
598 | nsp_index_write(base, SCSIBUSCTRL, AUTODIRECTION | ACKENB); | |
599 | } | |
600 | ||
601 | /* read & write message */ | |
602 | if (phase & BUSMON_IO) { | |
603 | nsp_dbg(NSP_DEBUG_DATA_IO, "read msg"); | |
604 | buf[ptr] = nsp_index_read(base, SCSIDATAWITHACK); | |
605 | } else { | |
606 | nsp_dbg(NSP_DEBUG_DATA_IO, "write msg"); | |
607 | nsp_index_write(base, SCSIDATAWITHACK, buf[ptr]); | |
608 | } | |
609 | nsp_negate_signal(SCpnt, BUSMON_ACK, "xfer<ack>"); | |
610 | ||
611 | } | |
612 | return len; | |
613 | } | |
614 | ||
615 | /* | |
616 | * get extra SCSI data from fifo | |
617 | */ | |
0fc82d5e | 618 | static int nsp_dataphase_bypass(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
619 | { |
620 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
621 | unsigned int count; | |
622 | ||
623 | //nsp_dbg(NSP_DEBUG_DATA_IO, "in"); | |
624 | ||
625 | if (SCpnt->SCp.have_data_in != IO_IN) { | |
626 | return 0; | |
627 | } | |
628 | ||
629 | count = nsp_fifo_count(SCpnt); | |
630 | if (data->FifoCount == count) { | |
631 | //nsp_dbg(NSP_DEBUG_DATA_IO, "not use bypass quirk"); | |
632 | return 0; | |
633 | } | |
634 | ||
635 | /* | |
636 | * XXX: NSP_QUIRK | |
637 | * data phase skip only occures in case of SCSI_LOW_READ | |
638 | */ | |
639 | nsp_dbg(NSP_DEBUG_DATA_IO, "use bypass quirk"); | |
640 | SCpnt->SCp.phase = PH_DATA; | |
641 | nsp_pio_read(SCpnt); | |
642 | nsp_setup_fifo(data, FALSE); | |
643 | ||
644 | return 0; | |
645 | } | |
646 | ||
647 | /* | |
648 | * accept reselection | |
649 | */ | |
0fc82d5e | 650 | static int nsp_reselected(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
651 | { |
652 | unsigned int base = SCpnt->device->host->io_port; | |
653 | unsigned int host_id = SCpnt->device->host->this_id; | |
654 | //nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
655 | unsigned char bus_reg; | |
656 | unsigned char id_reg, tmp; | |
657 | int target; | |
658 | ||
659 | nsp_dbg(NSP_DEBUG_RESELECTION, "in"); | |
660 | ||
661 | id_reg = nsp_index_read(base, RESELECTID); | |
662 | tmp = id_reg & (~BIT(host_id)); | |
663 | target = 0; | |
664 | while(tmp != 0) { | |
665 | if (tmp & BIT(0)) { | |
666 | break; | |
667 | } | |
668 | tmp >>= 1; | |
669 | target++; | |
670 | } | |
671 | ||
422c0d61 | 672 | if (scmd_id(SCpnt) != target) { |
1da177e4 LT |
673 | nsp_msg(KERN_ERR, "XXX: reselect ID must be %d in this implementation.", target); |
674 | } | |
675 | ||
676 | nsp_negate_signal(SCpnt, BUSMON_SEL, "reselect<SEL>"); | |
677 | ||
678 | nsp_nexus(SCpnt); | |
679 | bus_reg = nsp_index_read(base, SCSIBUSCTRL) & ~(SCSI_BSY | SCSI_ATN); | |
680 | nsp_index_write(base, SCSIBUSCTRL, bus_reg); | |
681 | nsp_index_write(base, SCSIBUSCTRL, bus_reg | AUTODIRECTION | ACKENB); | |
682 | ||
683 | return TRUE; | |
684 | } | |
685 | ||
686 | /* | |
687 | * count how many data transferd | |
688 | */ | |
0fc82d5e | 689 | static int nsp_fifo_count(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
690 | { |
691 | unsigned int base = SCpnt->device->host->io_port; | |
692 | unsigned int count; | |
693 | unsigned int l, m, h, dummy; | |
694 | ||
695 | nsp_index_write(base, POINTERCLR, POINTER_CLEAR | ACK_COUNTER); | |
696 | ||
697 | l = nsp_index_read(base, TRANSFERCOUNT); | |
698 | m = nsp_index_read(base, TRANSFERCOUNT); | |
699 | h = nsp_index_read(base, TRANSFERCOUNT); | |
700 | dummy = nsp_index_read(base, TRANSFERCOUNT); /* required this! */ | |
701 | ||
702 | count = (h << 16) | (m << 8) | (l << 0); | |
703 | ||
704 | //nsp_dbg(NSP_DEBUG_DATA_IO, "count=0x%x", count); | |
705 | ||
706 | return count; | |
707 | } | |
708 | ||
709 | /* fifo size */ | |
710 | #define RFIFO_CRIT 64 | |
711 | #define WFIFO_CRIT 64 | |
712 | ||
713 | /* | |
714 | * read data in DATA IN phase | |
715 | */ | |
0fc82d5e | 716 | static void nsp_pio_read(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
717 | { |
718 | unsigned int base = SCpnt->device->host->io_port; | |
719 | unsigned long mmio_base = SCpnt->device->host->base; | |
720 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
721 | long time_out; | |
722 | int ocount, res; | |
723 | unsigned char stat, fifo_stat; | |
724 | ||
725 | ocount = data->FifoCount; | |
726 | ||
727 | nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p resid=%d ocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d", | |
040cd232 BH |
728 | SCpnt, scsi_get_resid(SCpnt), ocount, SCpnt->SCp.ptr, |
729 | SCpnt->SCp.this_residual, SCpnt->SCp.buffer, | |
730 | SCpnt->SCp.buffers_residual); | |
1da177e4 LT |
731 | |
732 | time_out = 1000; | |
733 | ||
734 | while ((time_out-- != 0) && | |
735 | (SCpnt->SCp.this_residual > 0 || SCpnt->SCp.buffers_residual > 0 ) ) { | |
736 | ||
737 | stat = nsp_index_read(base, SCSIBUSMON); | |
738 | stat &= BUSMON_PHASE_MASK; | |
739 | ||
740 | ||
741 | res = nsp_fifo_count(SCpnt) - ocount; | |
742 | //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x ocount=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount, res); | |
743 | if (res == 0) { /* if some data avilable ? */ | |
744 | if (stat == BUSPHASE_DATA_IN) { /* phase changed? */ | |
745 | //nsp_dbg(NSP_DEBUG_DATA_IO, " wait for data this=%d", SCpnt->SCp.this_residual); | |
746 | continue; | |
747 | } else { | |
748 | nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x", stat); | |
749 | break; | |
750 | } | |
751 | } | |
752 | ||
753 | fifo_stat = nsp_read(base, FIFOSTATUS); | |
754 | if ((fifo_stat & FIFOSTATUS_FULL_EMPTY) == 0 && | |
755 | stat == BUSPHASE_DATA_IN) { | |
756 | continue; | |
757 | } | |
758 | ||
759 | res = min(res, SCpnt->SCp.this_residual); | |
760 | ||
761 | switch (data->TransferMode) { | |
762 | case MODE_IO32: | |
763 | res &= ~(BIT(1)|BIT(0)); /* align 4 */ | |
764 | nsp_fifo32_read(base, SCpnt->SCp.ptr, res >> 2); | |
765 | break; | |
766 | case MODE_IO8: | |
767 | nsp_fifo8_read (base, SCpnt->SCp.ptr, res ); | |
768 | break; | |
769 | ||
770 | case MODE_MEM32: | |
771 | res &= ~(BIT(1)|BIT(0)); /* align 4 */ | |
772 | nsp_mmio_fifo32_read(mmio_base, SCpnt->SCp.ptr, res >> 2); | |
773 | break; | |
774 | ||
775 | default: | |
776 | nsp_dbg(NSP_DEBUG_DATA_IO, "unknown read mode"); | |
777 | return; | |
778 | } | |
779 | ||
040cd232 | 780 | nsp_inc_resid(SCpnt, -res); |
1da177e4 LT |
781 | SCpnt->SCp.ptr += res; |
782 | SCpnt->SCp.this_residual -= res; | |
783 | ocount += res; | |
784 | //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this_residual=0x%x ocount=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount); | |
785 | ||
786 | /* go to next scatter list if available */ | |
787 | if (SCpnt->SCp.this_residual == 0 && | |
788 | SCpnt->SCp.buffers_residual != 0 ) { | |
789 | //nsp_dbg(NSP_DEBUG_DATA_IO, "scatterlist next timeout=%d", time_out); | |
790 | SCpnt->SCp.buffers_residual--; | |
791 | SCpnt->SCp.buffer++; | |
792 | SCpnt->SCp.ptr = BUFFER_ADDR; | |
793 | SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length; | |
794 | time_out = 1000; | |
795 | ||
796 | //nsp_dbg(NSP_DEBUG_DATA_IO, "page: 0x%p, off: 0x%x", SCpnt->SCp.buffer->page, SCpnt->SCp.buffer->offset); | |
797 | } | |
798 | } | |
799 | ||
800 | data->FifoCount = ocount; | |
801 | ||
0454c740 | 802 | if (time_out < 0) { |
1da177e4 | 803 | nsp_msg(KERN_DEBUG, "pio read timeout resid=%d this_residual=%d buffers_residual=%d", |
040cd232 BH |
804 | scsi_get_resid(SCpnt), SCpnt->SCp.this_residual, |
805 | SCpnt->SCp.buffers_residual); | |
1da177e4 LT |
806 | } |
807 | nsp_dbg(NSP_DEBUG_DATA_IO, "read ocount=0x%x", ocount); | |
040cd232 BH |
808 | nsp_dbg(NSP_DEBUG_DATA_IO, "r cmd=%d resid=0x%x\n", data->CmdId, |
809 | scsi_get_resid(SCpnt)); | |
1da177e4 LT |
810 | } |
811 | ||
812 | /* | |
813 | * write data in DATA OUT phase | |
814 | */ | |
0fc82d5e | 815 | static void nsp_pio_write(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
816 | { |
817 | unsigned int base = SCpnt->device->host->io_port; | |
818 | unsigned long mmio_base = SCpnt->device->host->base; | |
819 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
820 | int time_out; | |
821 | int ocount, res; | |
822 | unsigned char stat; | |
823 | ||
824 | ocount = data->FifoCount; | |
825 | ||
826 | nsp_dbg(NSP_DEBUG_DATA_IO, "in fifocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d resid=0x%x", | |
040cd232 BH |
827 | data->FifoCount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, |
828 | SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual, | |
829 | scsi_get_resid(SCpnt)); | |
1da177e4 LT |
830 | |
831 | time_out = 1000; | |
832 | ||
833 | while ((time_out-- != 0) && | |
834 | (SCpnt->SCp.this_residual > 0 || SCpnt->SCp.buffers_residual > 0)) { | |
835 | stat = nsp_index_read(base, SCSIBUSMON); | |
836 | stat &= BUSMON_PHASE_MASK; | |
837 | ||
838 | if (stat != BUSPHASE_DATA_OUT) { | |
839 | res = ocount - nsp_fifo_count(SCpnt); | |
840 | ||
841 | nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x, res=%d\n", stat, res); | |
842 | /* Put back pointer */ | |
040cd232 | 843 | nsp_inc_resid(SCpnt, res); |
1da177e4 LT |
844 | SCpnt->SCp.ptr -= res; |
845 | SCpnt->SCp.this_residual += res; | |
846 | ocount -= res; | |
847 | ||
848 | break; | |
849 | } | |
850 | ||
851 | res = ocount - nsp_fifo_count(SCpnt); | |
852 | if (res > 0) { /* write all data? */ | |
853 | nsp_dbg(NSP_DEBUG_DATA_IO, "wait for all data out. ocount=0x%x res=%d", ocount, res); | |
854 | continue; | |
855 | } | |
856 | ||
857 | res = min(SCpnt->SCp.this_residual, WFIFO_CRIT); | |
858 | ||
859 | //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, res); | |
860 | switch (data->TransferMode) { | |
861 | case MODE_IO32: | |
862 | res &= ~(BIT(1)|BIT(0)); /* align 4 */ | |
863 | nsp_fifo32_write(base, SCpnt->SCp.ptr, res >> 2); | |
864 | break; | |
865 | case MODE_IO8: | |
866 | nsp_fifo8_write (base, SCpnt->SCp.ptr, res ); | |
867 | break; | |
868 | ||
869 | case MODE_MEM32: | |
870 | res &= ~(BIT(1)|BIT(0)); /* align 4 */ | |
871 | nsp_mmio_fifo32_write(mmio_base, SCpnt->SCp.ptr, res >> 2); | |
872 | break; | |
873 | ||
874 | default: | |
875 | nsp_dbg(NSP_DEBUG_DATA_IO, "unknown write mode"); | |
876 | break; | |
877 | } | |
878 | ||
040cd232 | 879 | nsp_inc_resid(SCpnt, -res); |
1da177e4 LT |
880 | SCpnt->SCp.ptr += res; |
881 | SCpnt->SCp.this_residual -= res; | |
882 | ocount += res; | |
883 | ||
884 | /* go to next scatter list if available */ | |
885 | if (SCpnt->SCp.this_residual == 0 && | |
886 | SCpnt->SCp.buffers_residual != 0 ) { | |
887 | //nsp_dbg(NSP_DEBUG_DATA_IO, "scatterlist next"); | |
888 | SCpnt->SCp.buffers_residual--; | |
889 | SCpnt->SCp.buffer++; | |
890 | SCpnt->SCp.ptr = BUFFER_ADDR; | |
891 | SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length; | |
892 | time_out = 1000; | |
893 | } | |
894 | } | |
895 | ||
896 | data->FifoCount = ocount; | |
897 | ||
0454c740 | 898 | if (time_out < 0) { |
040cd232 BH |
899 | nsp_msg(KERN_DEBUG, "pio write timeout resid=0x%x", |
900 | scsi_get_resid(SCpnt)); | |
1da177e4 LT |
901 | } |
902 | nsp_dbg(NSP_DEBUG_DATA_IO, "write ocount=0x%x", ocount); | |
040cd232 BH |
903 | nsp_dbg(NSP_DEBUG_DATA_IO, "w cmd=%d resid=0x%x\n", data->CmdId, |
904 | scsi_get_resid(SCpnt)); | |
1da177e4 LT |
905 | } |
906 | #undef RFIFO_CRIT | |
907 | #undef WFIFO_CRIT | |
908 | ||
909 | /* | |
910 | * setup synchronous/asynchronous data transfer mode | |
911 | */ | |
0fc82d5e | 912 | static int nsp_nexus(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
913 | { |
914 | unsigned int base = SCpnt->device->host->io_port; | |
422c0d61 | 915 | unsigned char target = scmd_id(SCpnt); |
1da177e4 LT |
916 | // unsigned char lun = SCpnt->device->lun; |
917 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
918 | sync_data *sync = &(data->Sync[target]); | |
919 | ||
920 | //nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p", SCpnt); | |
921 | ||
922 | /* setup synch transfer registers */ | |
923 | nsp_index_write(base, SYNCREG, sync->SyncRegister); | |
924 | nsp_index_write(base, ACKWIDTH, sync->AckWidth); | |
925 | ||
040cd232 BH |
926 | if (scsi_get_resid(SCpnt) % 4 != 0 || |
927 | scsi_get_resid(SCpnt) <= PAGE_SIZE ) { | |
1da177e4 LT |
928 | data->TransferMode = MODE_IO8; |
929 | } else if (nsp_burst_mode == BURST_MEM32) { | |
930 | data->TransferMode = MODE_MEM32; | |
931 | } else if (nsp_burst_mode == BURST_IO32) { | |
932 | data->TransferMode = MODE_IO32; | |
933 | } else { | |
934 | data->TransferMode = MODE_IO8; | |
935 | } | |
936 | ||
937 | /* setup pdma fifo */ | |
938 | nsp_setup_fifo(data, TRUE); | |
939 | ||
940 | /* clear ack counter */ | |
941 | data->FifoCount = 0; | |
942 | nsp_index_write(base, POINTERCLR, POINTER_CLEAR | | |
943 | ACK_COUNTER_CLEAR | | |
944 | REQ_COUNTER_CLEAR | | |
945 | HOST_COUNTER_CLEAR); | |
946 | ||
947 | return 0; | |
948 | } | |
949 | ||
950 | #include "nsp_message.c" | |
951 | /* | |
952 | * interrupt handler | |
953 | */ | |
7d12e780 | 954 | static irqreturn_t nspintr(int irq, void *dev_id) |
1da177e4 LT |
955 | { |
956 | unsigned int base; | |
957 | unsigned char irq_status, irq_phase, phase; | |
0fc82d5e | 958 | struct scsi_cmnd *tmpSC; |
1da177e4 LT |
959 | unsigned char target, lun; |
960 | unsigned int *sync_neg; | |
961 | int i, tmp; | |
962 | nsp_hw_data *data; | |
963 | ||
964 | ||
965 | //nsp_dbg(NSP_DEBUG_INTR, "dev_id=0x%p", dev_id); | |
966 | //nsp_dbg(NSP_DEBUG_INTR, "host=0x%p", ((scsi_info_t *)dev_id)->host); | |
967 | ||
968 | if ( dev_id != NULL && | |
969 | ((scsi_info_t *)dev_id)->host != NULL ) { | |
970 | scsi_info_t *info = (scsi_info_t *)dev_id; | |
971 | ||
972 | data = (nsp_hw_data *)info->host->hostdata; | |
973 | } else { | |
974 | nsp_dbg(NSP_DEBUG_INTR, "host data wrong"); | |
975 | return IRQ_NONE; | |
976 | } | |
977 | ||
978 | //nsp_dbg(NSP_DEBUG_INTR, "&nsp_data_base=0x%p, dev_id=0x%p", &nsp_data_base, dev_id); | |
979 | ||
980 | base = data->BaseAddress; | |
981 | //nsp_dbg(NSP_DEBUG_INTR, "base=0x%x", base); | |
982 | ||
983 | /* | |
984 | * interrupt check | |
985 | */ | |
986 | nsp_write(base, IRQCONTROL, IRQCONTROL_IRQDISABLE); | |
987 | irq_status = nsp_read(base, IRQSTATUS); | |
988 | //nsp_dbg(NSP_DEBUG_INTR, "irq_status=0x%x", irq_status); | |
989 | if ((irq_status == 0xff) || ((irq_status & IRQSTATUS_MASK) == 0)) { | |
990 | nsp_write(base, IRQCONTROL, 0); | |
991 | //nsp_dbg(NSP_DEBUG_INTR, "no irq/shared irq"); | |
992 | return IRQ_NONE; | |
993 | } | |
994 | ||
995 | /* XXX: IMPORTANT | |
996 | * Do not read an irq_phase register if no scsi phase interrupt. | |
997 | * Unless, you should lose a scsi phase interrupt. | |
998 | */ | |
999 | phase = nsp_index_read(base, SCSIBUSMON); | |
1000 | if((irq_status & IRQSTATUS_SCSI) != 0) { | |
1001 | irq_phase = nsp_index_read(base, IRQPHASESENCE); | |
1002 | } else { | |
1003 | irq_phase = 0; | |
1004 | } | |
1005 | ||
1006 | //nsp_dbg(NSP_DEBUG_INTR, "irq_phase=0x%x", irq_phase); | |
1007 | ||
1008 | /* | |
1009 | * timer interrupt handler (scsi vs timer interrupts) | |
1010 | */ | |
1011 | //nsp_dbg(NSP_DEBUG_INTR, "timercount=%d", data->TimerCount); | |
1012 | if (data->TimerCount != 0) { | |
1013 | //nsp_dbg(NSP_DEBUG_INTR, "stop timer"); | |
1014 | nsp_index_write(base, TIMERCOUNT, 0); | |
1015 | nsp_index_write(base, TIMERCOUNT, 0); | |
1016 | data->TimerCount = 0; | |
1017 | } | |
1018 | ||
1019 | if ((irq_status & IRQSTATUS_MASK) == IRQSTATUS_TIMER && | |
1020 | data->SelectionTimeOut == 0) { | |
1021 | //nsp_dbg(NSP_DEBUG_INTR, "timer start"); | |
1022 | nsp_write(base, IRQCONTROL, IRQCONTROL_TIMER_CLEAR); | |
1023 | return IRQ_HANDLED; | |
1024 | } | |
1025 | ||
1026 | nsp_write(base, IRQCONTROL, IRQCONTROL_TIMER_CLEAR | IRQCONTROL_FIFO_CLEAR); | |
1027 | ||
1028 | if ((irq_status & IRQSTATUS_SCSI) && | |
1029 | (irq_phase & SCSI_RESET_IRQ)) { | |
1030 | nsp_msg(KERN_ERR, "bus reset (power off?)"); | |
1031 | ||
1032 | nsphw_init(data); | |
1033 | nsp_bus_reset(data); | |
1034 | ||
1035 | if(data->CurrentSC != NULL) { | |
1036 | tmpSC = data->CurrentSC; | |
1037 | tmpSC->result = (DID_RESET << 16) | | |
1038 | ((tmpSC->SCp.Message & 0xff) << 8) | | |
1039 | ((tmpSC->SCp.Status & 0xff) << 0); | |
1040 | nsp_scsi_done(tmpSC); | |
1041 | } | |
1042 | return IRQ_HANDLED; | |
1043 | } | |
1044 | ||
1045 | if (data->CurrentSC == NULL) { | |
1046 | nsp_msg(KERN_ERR, "CurrentSC==NULL irq_status=0x%x phase=0x%x irq_phase=0x%x this can't be happen. reset everything", irq_status, phase, irq_phase); | |
1047 | nsphw_init(data); | |
1048 | nsp_bus_reset(data); | |
1049 | return IRQ_HANDLED; | |
1050 | } | |
1051 | ||
1052 | tmpSC = data->CurrentSC; | |
1053 | target = tmpSC->device->id; | |
1054 | lun = tmpSC->device->lun; | |
1055 | sync_neg = &(data->Sync[target].SyncNegotiation); | |
1056 | ||
1057 | /* | |
1058 | * parse hardware SCSI irq reasons register | |
1059 | */ | |
1060 | if (irq_status & IRQSTATUS_SCSI) { | |
1061 | if (irq_phase & RESELECT_IRQ) { | |
1062 | nsp_dbg(NSP_DEBUG_INTR, "reselect"); | |
1063 | nsp_write(base, IRQCONTROL, IRQCONTROL_RESELECT_CLEAR); | |
1064 | if (nsp_reselected(tmpSC) != FALSE) { | |
1065 | return IRQ_HANDLED; | |
1066 | } | |
1067 | } | |
1068 | ||
1069 | if ((irq_phase & (PHASE_CHANGE_IRQ | LATCHED_BUS_FREE)) == 0) { | |
1070 | return IRQ_HANDLED; | |
1071 | } | |
1072 | } | |
1073 | ||
1074 | //show_phase(tmpSC); | |
1075 | ||
1076 | switch(tmpSC->SCp.phase) { | |
1077 | case PH_SELSTART: | |
1078 | // *sync_neg = SYNC_NOT_YET; | |
1079 | if ((phase & BUSMON_BSY) == 0) { | |
1080 | //nsp_dbg(NSP_DEBUG_INTR, "selection count=%d", data->SelectionTimeOut); | |
1081 | if (data->SelectionTimeOut >= NSP_SELTIMEOUT) { | |
1082 | nsp_dbg(NSP_DEBUG_INTR, "selection time out"); | |
1083 | data->SelectionTimeOut = 0; | |
1084 | nsp_index_write(base, SCSIBUSCTRL, 0); | |
1085 | ||
1086 | tmpSC->result = DID_TIME_OUT << 16; | |
1087 | nsp_scsi_done(tmpSC); | |
1088 | ||
1089 | return IRQ_HANDLED; | |
1090 | } | |
1091 | data->SelectionTimeOut += 1; | |
1092 | nsp_start_timer(tmpSC, 1000/51); | |
1093 | return IRQ_HANDLED; | |
1094 | } | |
1095 | ||
1096 | /* attention assert */ | |
1097 | //nsp_dbg(NSP_DEBUG_INTR, "attention assert"); | |
1098 | data->SelectionTimeOut = 0; | |
1099 | tmpSC->SCp.phase = PH_SELECTED; | |
1100 | nsp_index_write(base, SCSIBUSCTRL, SCSI_ATN); | |
1101 | udelay(1); | |
1102 | nsp_index_write(base, SCSIBUSCTRL, SCSI_ATN | AUTODIRECTION | ACKENB); | |
1103 | return IRQ_HANDLED; | |
1104 | ||
1105 | break; | |
1106 | ||
1107 | case PH_RESELECT: | |
1108 | //nsp_dbg(NSP_DEBUG_INTR, "phase reselect"); | |
1109 | // *sync_neg = SYNC_NOT_YET; | |
1110 | if ((phase & BUSMON_PHASE_MASK) != BUSPHASE_MESSAGE_IN) { | |
1111 | ||
1112 | tmpSC->result = DID_ABORT << 16; | |
1113 | nsp_scsi_done(tmpSC); | |
1114 | return IRQ_HANDLED; | |
1115 | } | |
1116 | /* fall thru */ | |
1117 | default: | |
1118 | if ((irq_status & (IRQSTATUS_SCSI | IRQSTATUS_FIFO)) == 0) { | |
1119 | return IRQ_HANDLED; | |
1120 | } | |
1121 | break; | |
1122 | } | |
1123 | ||
1124 | /* | |
1125 | * SCSI sequencer | |
1126 | */ | |
1127 | //nsp_dbg(NSP_DEBUG_INTR, "start scsi seq"); | |
1128 | ||
1129 | /* normal disconnect */ | |
1130 | if (((tmpSC->SCp.phase == PH_MSG_IN) || (tmpSC->SCp.phase == PH_MSG_OUT)) && | |
1131 | (irq_phase & LATCHED_BUS_FREE) != 0 ) { | |
1132 | nsp_dbg(NSP_DEBUG_INTR, "normal disconnect irq_status=0x%x, phase=0x%x, irq_phase=0x%x", irq_status, phase, irq_phase); | |
1133 | ||
1134 | //*sync_neg = SYNC_NOT_YET; | |
1135 | ||
1136 | if ((tmpSC->SCp.Message == MSG_COMMAND_COMPLETE)) { /* all command complete and return status */ | |
1137 | tmpSC->result = (DID_OK << 16) | | |
1138 | ((tmpSC->SCp.Message & 0xff) << 8) | | |
1139 | ((tmpSC->SCp.Status & 0xff) << 0); | |
1140 | nsp_dbg(NSP_DEBUG_INTR, "command complete result=0x%x", tmpSC->result); | |
1141 | nsp_scsi_done(tmpSC); | |
1142 | ||
1143 | return IRQ_HANDLED; | |
1144 | } | |
1145 | ||
1146 | return IRQ_HANDLED; | |
1147 | } | |
1148 | ||
1149 | ||
1150 | /* check unexpected bus free state */ | |
1151 | if (phase == 0) { | |
1152 | nsp_msg(KERN_DEBUG, "unexpected bus free. irq_status=0x%x, phase=0x%x, irq_phase=0x%x", irq_status, phase, irq_phase); | |
1153 | ||
1154 | *sync_neg = SYNC_NG; | |
1155 | tmpSC->result = DID_ERROR << 16; | |
1156 | nsp_scsi_done(tmpSC); | |
1157 | return IRQ_HANDLED; | |
1158 | } | |
1159 | ||
1160 | switch (phase & BUSMON_PHASE_MASK) { | |
1161 | case BUSPHASE_COMMAND: | |
1162 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_COMMAND"); | |
1163 | if ((phase & BUSMON_REQ) == 0) { | |
1164 | nsp_dbg(NSP_DEBUG_INTR, "REQ == 0"); | |
1165 | return IRQ_HANDLED; | |
1166 | } | |
1167 | ||
1168 | tmpSC->SCp.phase = PH_COMMAND; | |
1169 | ||
1170 | nsp_nexus(tmpSC); | |
1171 | ||
1172 | /* write scsi command */ | |
1173 | nsp_dbg(NSP_DEBUG_INTR, "cmd_len=%d", tmpSC->cmd_len); | |
1174 | nsp_index_write(base, COMMANDCTRL, CLEAR_COMMAND_POINTER); | |
1175 | for (i = 0; i < tmpSC->cmd_len; i++) { | |
1176 | nsp_index_write(base, COMMANDDATA, tmpSC->cmnd[i]); | |
1177 | } | |
1178 | nsp_index_write(base, COMMANDCTRL, CLEAR_COMMAND_POINTER | AUTO_COMMAND_GO); | |
1179 | break; | |
1180 | ||
1181 | case BUSPHASE_DATA_OUT: | |
1182 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_DATA_OUT"); | |
1183 | ||
1184 | tmpSC->SCp.phase = PH_DATA; | |
1185 | tmpSC->SCp.have_data_in = IO_OUT; | |
1186 | ||
1187 | nsp_pio_write(tmpSC); | |
1188 | ||
1189 | break; | |
1190 | ||
1191 | case BUSPHASE_DATA_IN: | |
1192 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_DATA_IN"); | |
1193 | ||
1194 | tmpSC->SCp.phase = PH_DATA; | |
1195 | tmpSC->SCp.have_data_in = IO_IN; | |
1196 | ||
1197 | nsp_pio_read(tmpSC); | |
1198 | ||
1199 | break; | |
1200 | ||
1201 | case BUSPHASE_STATUS: | |
1202 | nsp_dataphase_bypass(tmpSC); | |
1203 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_STATUS"); | |
1204 | ||
1205 | tmpSC->SCp.phase = PH_STATUS; | |
1206 | ||
1207 | tmpSC->SCp.Status = nsp_index_read(base, SCSIDATAWITHACK); | |
1208 | nsp_dbg(NSP_DEBUG_INTR, "message=0x%x status=0x%x", tmpSC->SCp.Message, tmpSC->SCp.Status); | |
1209 | ||
1210 | break; | |
1211 | ||
1212 | case BUSPHASE_MESSAGE_OUT: | |
1213 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_MESSAGE_OUT"); | |
1214 | if ((phase & BUSMON_REQ) == 0) { | |
1215 | goto timer_out; | |
1216 | } | |
1217 | ||
1218 | tmpSC->SCp.phase = PH_MSG_OUT; | |
1219 | ||
1220 | //*sync_neg = SYNC_NOT_YET; | |
1221 | ||
1222 | data->MsgLen = i = 0; | |
1223 | data->MsgBuffer[i] = IDENTIFY(TRUE, lun); i++; | |
1224 | ||
1225 | if (*sync_neg == SYNC_NOT_YET) { | |
1226 | data->Sync[target].SyncPeriod = 0; | |
1227 | data->Sync[target].SyncOffset = 0; | |
1228 | ||
1229 | /**/ | |
1230 | data->MsgBuffer[i] = MSG_EXTENDED; i++; | |
1231 | data->MsgBuffer[i] = 3; i++; | |
1232 | data->MsgBuffer[i] = MSG_EXT_SDTR; i++; | |
1233 | data->MsgBuffer[i] = 0x0c; i++; | |
1234 | data->MsgBuffer[i] = 15; i++; | |
1235 | /**/ | |
1236 | } | |
1237 | data->MsgLen = i; | |
1238 | ||
1239 | nsp_analyze_sdtr(tmpSC); | |
1240 | show_message(data); | |
1241 | nsp_message_out(tmpSC); | |
1242 | break; | |
1243 | ||
1244 | case BUSPHASE_MESSAGE_IN: | |
1245 | nsp_dataphase_bypass(tmpSC); | |
1246 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_MESSAGE_IN"); | |
1247 | if ((phase & BUSMON_REQ) == 0) { | |
1248 | goto timer_out; | |
1249 | } | |
1250 | ||
1251 | tmpSC->SCp.phase = PH_MSG_IN; | |
1252 | nsp_message_in(tmpSC); | |
1253 | ||
1254 | /**/ | |
1255 | if (*sync_neg == SYNC_NOT_YET) { | |
1256 | //nsp_dbg(NSP_DEBUG_INTR, "sync target=%d,lun=%d",target,lun); | |
1257 | ||
1258 | if (data->MsgLen >= 5 && | |
1259 | data->MsgBuffer[0] == MSG_EXTENDED && | |
1260 | data->MsgBuffer[1] == 3 && | |
1261 | data->MsgBuffer[2] == MSG_EXT_SDTR ) { | |
1262 | data->Sync[target].SyncPeriod = data->MsgBuffer[3]; | |
1263 | data->Sync[target].SyncOffset = data->MsgBuffer[4]; | |
1264 | //nsp_dbg(NSP_DEBUG_INTR, "sync ok, %d %d", data->MsgBuffer[3], data->MsgBuffer[4]); | |
1265 | *sync_neg = SYNC_OK; | |
1266 | } else { | |
1267 | data->Sync[target].SyncPeriod = 0; | |
1268 | data->Sync[target].SyncOffset = 0; | |
1269 | *sync_neg = SYNC_NG; | |
1270 | } | |
1271 | nsp_analyze_sdtr(tmpSC); | |
1272 | } | |
1273 | /**/ | |
1274 | ||
1275 | /* search last messeage byte */ | |
1276 | tmp = -1; | |
1277 | for (i = 0; i < data->MsgLen; i++) { | |
1278 | tmp = data->MsgBuffer[i]; | |
1279 | if (data->MsgBuffer[i] == MSG_EXTENDED) { | |
1280 | i += (1 + data->MsgBuffer[i+1]); | |
1281 | } | |
1282 | } | |
1283 | tmpSC->SCp.Message = tmp; | |
1284 | ||
1285 | nsp_dbg(NSP_DEBUG_INTR, "message=0x%x len=%d", tmpSC->SCp.Message, data->MsgLen); | |
1286 | show_message(data); | |
1287 | ||
1288 | break; | |
1289 | ||
1290 | case BUSPHASE_SELECT: | |
1291 | default: | |
1292 | nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE other"); | |
1293 | ||
1294 | break; | |
1295 | } | |
1296 | ||
1297 | //nsp_dbg(NSP_DEBUG_INTR, "out"); | |
1298 | return IRQ_HANDLED; | |
1299 | ||
1300 | timer_out: | |
1301 | nsp_start_timer(tmpSC, 1000/102); | |
1302 | return IRQ_HANDLED; | |
1303 | } | |
1304 | ||
1305 | #ifdef NSP_DEBUG | |
1306 | #include "nsp_debug.c" | |
1307 | #endif /* NSP_DEBUG */ | |
1308 | ||
1309 | /*----------------------------------------------------------------*/ | |
1310 | /* look for ninja3 card and init if found */ | |
1311 | /*----------------------------------------------------------------*/ | |
d0be4a7d | 1312 | static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht) |
1da177e4 LT |
1313 | { |
1314 | struct Scsi_Host *host; /* registered host structure */ | |
1315 | nsp_hw_data *data_b = &nsp_data_base, *data; | |
1316 | ||
1317 | nsp_dbg(NSP_DEBUG_INIT, "this_id=%d", sht->this_id); | |
1da177e4 | 1318 | host = scsi_host_alloc(&nsp_driver_template, sizeof(nsp_hw_data)); |
1da177e4 LT |
1319 | if (host == NULL) { |
1320 | nsp_dbg(NSP_DEBUG_INIT, "host failed"); | |
1321 | return NULL; | |
1322 | } | |
1323 | ||
1324 | memcpy(host->hostdata, data_b, sizeof(nsp_hw_data)); | |
1325 | data = (nsp_hw_data *)host->hostdata; | |
1326 | data->ScsiInfo->host = host; | |
1327 | #ifdef NSP_DEBUG | |
1328 | data->CmdId = 0; | |
1329 | #endif | |
1330 | ||
1331 | nsp_dbg(NSP_DEBUG_INIT, "irq=%d,%d", data_b->IrqNumber, ((nsp_hw_data *)host->hostdata)->IrqNumber); | |
1332 | ||
1333 | host->unique_id = data->BaseAddress; | |
1334 | host->io_port = data->BaseAddress; | |
1335 | host->n_io_port = data->NumAddress; | |
1336 | host->irq = data->IrqNumber; | |
1337 | host->base = data->MmioAddress; | |
1338 | ||
1339 | spin_lock_init(&(data->Lock)); | |
1340 | ||
1341 | snprintf(data->nspinfo, | |
1342 | sizeof(data->nspinfo), | |
1343 | "NinjaSCSI-3/32Bi Driver $Revision: 1.23 $ IO:0x%04lx-0x%04lx MMIO(virt addr):0x%04lx IRQ:%02d", | |
1344 | host->io_port, host->io_port + host->n_io_port - 1, | |
1345 | host->base, | |
1346 | host->irq); | |
1347 | sht->name = data->nspinfo; | |
1348 | ||
1349 | nsp_dbg(NSP_DEBUG_INIT, "end"); | |
1350 | ||
1351 | ||
1352 | return host; /* detect done. */ | |
1353 | } | |
1354 | ||
1da177e4 LT |
1355 | /*----------------------------------------------------------------*/ |
1356 | /* return info string */ | |
1357 | /*----------------------------------------------------------------*/ | |
1358 | static const char *nsp_info(struct Scsi_Host *shpnt) | |
1359 | { | |
1360 | nsp_hw_data *data = (nsp_hw_data *)shpnt->hostdata; | |
1361 | ||
1362 | return data->nspinfo; | |
1363 | } | |
1364 | ||
1365 | #undef SPRINTF | |
1366 | #define SPRINTF(args...) \ | |
1367 | do { \ | |
1368 | if(length > (pos - buffer)) { \ | |
1369 | pos += snprintf(pos, length - (pos - buffer) + 1, ## args); \ | |
1370 | nsp_dbg(NSP_DEBUG_PROC, "buffer=0x%p pos=0x%p length=%d %d\n", buffer, pos, length, length - (pos - buffer));\ | |
1371 | } \ | |
1372 | } while(0) | |
774251ef AB |
1373 | |
1374 | static int nsp_proc_info(struct Scsi_Host *host, char *buffer, char **start, | |
1375 | off_t offset, int length, int inout) | |
1da177e4 LT |
1376 | { |
1377 | int id; | |
1378 | char *pos = buffer; | |
1379 | int thislength; | |
1380 | int speed; | |
1381 | unsigned long flags; | |
1382 | nsp_hw_data *data; | |
1da177e4 | 1383 | int hostno; |
774251ef | 1384 | |
1da177e4 LT |
1385 | if (inout) { |
1386 | return -EINVAL; | |
1387 | } | |
1388 | ||
1da177e4 | 1389 | hostno = host->host_no; |
1da177e4 LT |
1390 | data = (nsp_hw_data *)host->hostdata; |
1391 | ||
1392 | ||
1393 | SPRINTF("NinjaSCSI status\n\n"); | |
1394 | SPRINTF("Driver version: $Revision: 1.23 $\n"); | |
1395 | SPRINTF("SCSI host No.: %d\n", hostno); | |
1396 | SPRINTF("IRQ: %d\n", host->irq); | |
1397 | SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1); | |
1398 | SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1); | |
1399 | SPRINTF("sg_tablesize: %d\n", host->sg_tablesize); | |
1400 | ||
1401 | SPRINTF("burst transfer mode: "); | |
1402 | switch (nsp_burst_mode) { | |
1403 | case BURST_IO8: | |
1404 | SPRINTF("io8"); | |
1405 | break; | |
1406 | case BURST_IO32: | |
1407 | SPRINTF("io32"); | |
1408 | break; | |
1409 | case BURST_MEM32: | |
1410 | SPRINTF("mem32"); | |
1411 | break; | |
1412 | default: | |
1413 | SPRINTF("???"); | |
1414 | break; | |
1415 | } | |
1416 | SPRINTF("\n"); | |
1417 | ||
1418 | ||
1419 | spin_lock_irqsave(&(data->Lock), flags); | |
1420 | SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC); | |
1421 | spin_unlock_irqrestore(&(data->Lock), flags); | |
1422 | ||
1423 | SPRINTF("SDTR status\n"); | |
1424 | for(id = 0; id < ARRAY_SIZE(data->Sync); id++) { | |
1425 | ||
1426 | SPRINTF("id %d: ", id); | |
1427 | ||
1428 | if (id == host->this_id) { | |
1429 | SPRINTF("----- NinjaSCSI-3 host adapter\n"); | |
1430 | continue; | |
1431 | } | |
1432 | ||
1433 | switch(data->Sync[id].SyncNegotiation) { | |
1434 | case SYNC_OK: | |
1435 | SPRINTF(" sync"); | |
1436 | break; | |
1437 | case SYNC_NG: | |
1438 | SPRINTF("async"); | |
1439 | break; | |
1440 | case SYNC_NOT_YET: | |
1441 | SPRINTF(" none"); | |
1442 | break; | |
1443 | default: | |
1444 | SPRINTF("?????"); | |
1445 | break; | |
1446 | } | |
1447 | ||
1448 | if (data->Sync[id].SyncPeriod != 0) { | |
1449 | speed = 1000000 / (data->Sync[id].SyncPeriod * 4); | |
1450 | ||
1451 | SPRINTF(" transfer %d.%dMB/s, offset %d", | |
1452 | speed / 1000, | |
1453 | speed % 1000, | |
1454 | data->Sync[id].SyncOffset | |
1455 | ); | |
1456 | } | |
1457 | SPRINTF("\n"); | |
1458 | } | |
1459 | ||
1460 | thislength = pos - (buffer + offset); | |
1461 | ||
1462 | if(thislength < 0) { | |
1463 | *start = NULL; | |
1464 | return 0; | |
1465 | } | |
1466 | ||
1467 | ||
1468 | thislength = min(thislength, length); | |
1469 | *start = buffer + offset; | |
1470 | ||
1471 | return thislength; | |
1472 | } | |
1473 | #undef SPRINTF | |
1474 | ||
1475 | /*---------------------------------------------------------------*/ | |
1476 | /* error handler */ | |
1477 | /*---------------------------------------------------------------*/ | |
1478 | ||
1da177e4 | 1479 | /* |
0fc82d5e | 1480 | static int nsp_eh_abort(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
1481 | { |
1482 | nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt); | |
1483 | ||
1484 | return nsp_eh_bus_reset(SCpnt); | |
1485 | }*/ | |
1486 | ||
1da177e4 LT |
1487 | static int nsp_bus_reset(nsp_hw_data *data) |
1488 | { | |
1489 | unsigned int base = data->BaseAddress; | |
1490 | int i; | |
1491 | ||
1492 | nsp_write(base, IRQCONTROL, IRQCONTROL_ALLMASK); | |
1493 | ||
1494 | nsp_index_write(base, SCSIBUSCTRL, SCSI_RST); | |
1495 | mdelay(100); /* 100ms */ | |
1496 | nsp_index_write(base, SCSIBUSCTRL, 0); | |
1497 | for(i = 0; i < 5; i++) { | |
1498 | nsp_index_read(base, IRQPHASESENCE); /* dummy read */ | |
1499 | } | |
1500 | ||
1501 | nsphw_init_sync(data); | |
1502 | ||
1503 | nsp_write(base, IRQCONTROL, IRQCONTROL_ALLCLEAR); | |
1504 | ||
1505 | return SUCCESS; | |
1506 | } | |
1507 | ||
0fc82d5e | 1508 | static int nsp_eh_bus_reset(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
1509 | { |
1510 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
1511 | ||
1512 | nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt); | |
1513 | ||
1514 | return nsp_bus_reset(data); | |
1515 | } | |
1516 | ||
0fc82d5e | 1517 | static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
1518 | { |
1519 | nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; | |
1520 | ||
1521 | nsp_dbg(NSP_DEBUG_BUSRESET, "in"); | |
1522 | ||
1523 | nsphw_init(data); | |
1524 | ||
1525 | return SUCCESS; | |
1526 | } | |
1527 | ||
1528 | ||
1529 | /********************************************************************** | |
1530 | PCMCIA functions | |
1531 | **********************************************************************/ | |
1532 | ||
1533 | /*====================================================================== | |
1534 | nsp_cs_attach() creates an "instance" of the driver, allocating | |
1535 | local data structures for one device. The device is registered | |
1536 | with Card Services. | |
1537 | ||
1538 | The dev_link structure is initialized, but we don't actually | |
1539 | configure the card at this point -- we wait until we receive a | |
1540 | card insertion event. | |
1541 | ======================================================================*/ | |
15b99ac1 | 1542 | static int nsp_cs_probe(struct pcmcia_device *link) |
1da177e4 LT |
1543 | { |
1544 | scsi_info_t *info; | |
1da177e4 | 1545 | nsp_hw_data *data = &nsp_data_base; |
15b99ac1 | 1546 | int ret; |
1da177e4 LT |
1547 | |
1548 | nsp_dbg(NSP_DEBUG_INIT, "in"); | |
1549 | ||
1550 | /* Create new SCSI device */ | |
dd00cc48 | 1551 | info = kzalloc(sizeof(*info), GFP_KERNEL); |
f8cfa618 | 1552 | if (info == NULL) { return -ENOMEM; } |
fba395ee | 1553 | info->p_dev = link; |
1da177e4 LT |
1554 | link->priv = info; |
1555 | data->ScsiInfo = info; | |
1556 | ||
1557 | nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info); | |
1558 | ||
15b99ac1 | 1559 | ret = nsp_cs_config(link); |
1da177e4 LT |
1560 | |
1561 | nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link); | |
15b99ac1 | 1562 | return ret; |
1da177e4 LT |
1563 | } /* nsp_cs_attach */ |
1564 | ||
1565 | ||
1566 | /*====================================================================== | |
1567 | This deletes a driver "instance". The device is de-registered | |
1568 | with Card Services. If it has been released, all local data | |
1569 | structures are freed. Otherwise, the structures will be freed | |
1570 | when the device is released. | |
1571 | ======================================================================*/ | |
fba395ee | 1572 | static void nsp_cs_detach(struct pcmcia_device *link) |
1da177e4 | 1573 | { |
1da177e4 LT |
1574 | nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link); |
1575 | ||
e2d40963 DB |
1576 | ((scsi_info_t *)link->priv)->stop = 1; |
1577 | nsp_cs_release(link); | |
1da177e4 | 1578 | |
1da177e4 LT |
1579 | kfree(link->priv); |
1580 | link->priv = NULL; | |
1da177e4 LT |
1581 | } /* nsp_cs_detach */ |
1582 | ||
1583 | ||
1584 | /*====================================================================== | |
1585 | nsp_cs_config() is scheduled to run after a CARD_INSERTION event | |
1586 | is received, to configure the PCMCIA socket, and to make the | |
1587 | ethernet device available to the system. | |
1588 | ======================================================================*/ | |
1da177e4 | 1589 | |
00990e7c | 1590 | static int nsp_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) |
0e6f9d27 | 1591 | { |
cdb13808 | 1592 | nsp_hw_data *data = priv_data; |
1da177e4 | 1593 | |
00990e7c | 1594 | if (p_dev->config_index == 0) |
0e6f9d27 | 1595 | return -ENODEV; |
1da177e4 | 1596 | |
00990e7c DB |
1597 | /* This reserves IO space but doesn't actually enable it */ |
1598 | if (pcmcia_request_io(p_dev) != 0) | |
1599 | goto next_entry; | |
1da177e4 | 1600 | |
00990e7c | 1601 | if (resource_size(p_dev->resource[2])) { |
440eed43 DB |
1602 | p_dev->resource[2]->flags |= (WIN_DATA_WIDTH_16 | |
1603 | WIN_MEMORY_TYPE_CM | | |
1604 | WIN_ENABLE); | |
440eed43 DB |
1605 | if (p_dev->resource[2]->end < 0x1000) |
1606 | p_dev->resource[2]->end = 0x1000; | |
1607 | if (pcmcia_request_window(p_dev, p_dev->resource[2], 0) != 0) | |
1608 | goto next_entry; | |
1609 | if (pcmcia_map_mem_page(p_dev, p_dev->resource[2], | |
00990e7c | 1610 | p_dev->card_addr) != 0) |
440eed43 DB |
1611 | goto next_entry; |
1612 | ||
1613 | data->MmioAddress = (unsigned long) | |
1614 | ioremap_nocache(p_dev->resource[2]->start, | |
cdb13808 | 1615 | resource_size(p_dev->resource[2])); |
440eed43 | 1616 | data->MmioLength = resource_size(p_dev->resource[2]); |
1da177e4 | 1617 | } |
440eed43 DB |
1618 | /* If we got this far, we're cool! */ |
1619 | return 0; | |
1da177e4 | 1620 | |
0e6f9d27 DB |
1621 | next_entry: |
1622 | nsp_dbg(NSP_DEBUG_INIT, "next"); | |
1623 | pcmcia_disable_device(p_dev); | |
1624 | return -ENODEV; | |
1625 | } | |
1626 | ||
1627 | static int nsp_cs_config(struct pcmcia_device *link) | |
1628 | { | |
1629 | int ret; | |
1630 | scsi_info_t *info = link->priv; | |
0e6f9d27 DB |
1631 | struct Scsi_Host *host; |
1632 | nsp_hw_data *data = &nsp_data_base; | |
1633 | ||
1634 | nsp_dbg(NSP_DEBUG_INIT, "in"); | |
1635 | ||
440eed43 | 1636 | link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC | |
00990e7c DB |
1637 | CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IOMEM | |
1638 | CONF_AUTO_SET_IO; | |
440eed43 | 1639 | |
cdb13808 | 1640 | ret = pcmcia_loop_config(link, nsp_cs_config_check, data); |
e794c01b | 1641 | if (ret) |
0e6f9d27 DB |
1642 | goto cs_failed; |
1643 | ||
eb14120f DB |
1644 | if (pcmcia_request_irq(link, nspintr)) |
1645 | goto cs_failed; | |
0e6f9d27 | 1646 | |
1ac71e5a | 1647 | ret = pcmcia_enable_device(link); |
0e6f9d27 DB |
1648 | if (ret) |
1649 | goto cs_failed; | |
1da177e4 LT |
1650 | |
1651 | if (free_ports) { | |
9a017a91 DB |
1652 | if (link->resource[0]) { |
1653 | release_region(link->resource[0]->start, | |
1654 | resource_size(link->resource[0])); | |
1da177e4 | 1655 | } |
9a017a91 DB |
1656 | if (link->resource[1]) { |
1657 | release_region(link->resource[1]->start, | |
1658 | resource_size(link->resource[1])); | |
1da177e4 LT |
1659 | } |
1660 | } | |
1661 | ||
1662 | /* Set port and IRQ */ | |
9a017a91 DB |
1663 | data->BaseAddress = link->resource[0]->start; |
1664 | data->NumAddress = resource_size(link->resource[0]); | |
eb14120f | 1665 | data->IrqNumber = link->irq; |
1da177e4 LT |
1666 | |
1667 | nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d", | |
1668 | data->BaseAddress, data->NumAddress, data->IrqNumber); | |
1669 | ||
1670 | if(nsphw_init(data) == FALSE) { | |
1671 | goto cs_failed; | |
1672 | } | |
1673 | ||
1da177e4 | 1674 | host = nsp_detect(&nsp_driver_template); |
1da177e4 LT |
1675 | |
1676 | if (host == NULL) { | |
1677 | nsp_dbg(NSP_DEBUG_INIT, "detect failed"); | |
1678 | goto cs_failed; | |
1679 | } | |
1680 | ||
1681 | ||
15b99ac1 DB |
1682 | ret = scsi_add_host (host, NULL); |
1683 | if (ret) | |
1684 | goto cs_failed; | |
1685 | ||
1da177e4 LT |
1686 | scsi_scan_host(host); |
1687 | ||
1da177e4 LT |
1688 | info->host = host; |
1689 | ||
1da177e4 | 1690 | /* Finally, report what we've done */ |
70294b46 | 1691 | printk(KERN_INFO "nsp_cs: index 0x%02x: ", |
7feabb64 | 1692 | link->config_index); |
e8405f0f DB |
1693 | if (link->vpp) { |
1694 | printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); | |
1da177e4 | 1695 | } |
1ac71e5a | 1696 | printk(", irq %d", link->irq); |
9a017a91 DB |
1697 | if (link->resource[0]) |
1698 | printk(", io %pR", link->resource[0]); | |
1699 | if (link->resource[1]) | |
1700 | printk(" & %pR", link->resource[1]); | |
cdb13808 DB |
1701 | if (link->resource[2]) |
1702 | printk(", mem %pR", link->resource[2]); | |
1da177e4 LT |
1703 | printk("\n"); |
1704 | ||
15b99ac1 | 1705 | return 0; |
1da177e4 LT |
1706 | |
1707 | cs_failed: | |
1708 | nsp_dbg(NSP_DEBUG_INIT, "config fail"); | |
1da177e4 LT |
1709 | nsp_cs_release(link); |
1710 | ||
15b99ac1 | 1711 | return -ENODEV; |
1da177e4 | 1712 | } /* nsp_cs_config */ |
1da177e4 LT |
1713 | |
1714 | ||
1715 | /*====================================================================== | |
1716 | After a card is removed, nsp_cs_release() will unregister the net | |
1717 | device, and release the PCMCIA configuration. If the device is | |
1718 | still open, this will be postponed until it is closed. | |
1719 | ======================================================================*/ | |
fba395ee | 1720 | static void nsp_cs_release(struct pcmcia_device *link) |
1da177e4 LT |
1721 | { |
1722 | scsi_info_t *info = link->priv; | |
1723 | nsp_hw_data *data = NULL; | |
1724 | ||
1725 | if (info->host == NULL) { | |
1726 | nsp_msg(KERN_DEBUG, "unexpected card release call."); | |
1727 | } else { | |
1728 | data = (nsp_hw_data *)info->host->hostdata; | |
1729 | } | |
1730 | ||
1731 | nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link); | |
1732 | ||
1733 | /* Unlink the device chain */ | |
1da177e4 LT |
1734 | if (info->host != NULL) { |
1735 | scsi_remove_host(info->host); | |
1736 | } | |
1da177e4 | 1737 | |
cdb13808 | 1738 | if (resource_size(link->resource[2])) { |
1da177e4 LT |
1739 | if (data != NULL) { |
1740 | iounmap((void *)(data->MmioAddress)); | |
1741 | } | |
1da177e4 | 1742 | } |
fba395ee | 1743 | pcmcia_disable_device(link); |
5f2a71fc | 1744 | |
1da177e4 LT |
1745 | if (info->host != NULL) { |
1746 | scsi_host_put(info->host); | |
1747 | } | |
1da177e4 LT |
1748 | } /* nsp_cs_release */ |
1749 | ||
fba395ee | 1750 | static int nsp_cs_suspend(struct pcmcia_device *link) |
98e4c28b | 1751 | { |
98e4c28b DB |
1752 | scsi_info_t *info = link->priv; |
1753 | nsp_hw_data *data; | |
1754 | ||
98e4c28b DB |
1755 | nsp_dbg(NSP_DEBUG_INIT, "event: suspend"); |
1756 | ||
1757 | if (info->host != NULL) { | |
1758 | nsp_msg(KERN_INFO, "clear SDTR status"); | |
1759 | ||
1760 | data = (nsp_hw_data *)info->host->hostdata; | |
1761 | ||
1762 | nsphw_init_sync(data); | |
1763 | } | |
1764 | ||
1765 | info->stop = 1; | |
1766 | ||
98e4c28b DB |
1767 | return 0; |
1768 | } | |
1769 | ||
fba395ee | 1770 | static int nsp_cs_resume(struct pcmcia_device *link) |
98e4c28b | 1771 | { |
98e4c28b DB |
1772 | scsi_info_t *info = link->priv; |
1773 | nsp_hw_data *data; | |
1774 | ||
1775 | nsp_dbg(NSP_DEBUG_INIT, "event: resume"); | |
1776 | ||
98e4c28b DB |
1777 | info->stop = 0; |
1778 | ||
1779 | if (info->host != NULL) { | |
1780 | nsp_msg(KERN_INFO, "reset host and bus"); | |
1781 | ||
1782 | data = (nsp_hw_data *)info->host->hostdata; | |
1783 | ||
1784 | nsphw_init (data); | |
1785 | nsp_bus_reset(data); | |
1786 | } | |
1787 | ||
1788 | return 0; | |
1789 | } | |
1790 | ||
1da177e4 LT |
1791 | /*======================================================================* |
1792 | * module entry point | |
1793 | *====================================================================*/ | |
aba14100 DB |
1794 | static struct pcmcia_device_id nsp_cs_ids[] = { |
1795 | PCMCIA_DEVICE_PROD_ID123("IO DATA", "CBSC16 ", "1", 0x547e66dc, 0x0d63a3fd, 0x51de003a), | |
1796 | PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-001", "1", 0x534c02bc, 0x52008408, 0x51de003a), | |
1797 | PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-002", "1", 0x534c02bc, 0xcb09d5b2, 0x51de003a), | |
1798 | PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-003", "1", 0x534c02bc, 0xbc0ee524, 0x51de003a), | |
1799 | PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-004", "1", 0x534c02bc, 0x226a7087, 0x51de003a), | |
1800 | PCMCIA_DEVICE_PROD_ID123("WBT", "NinjaSCSI-3", "R1.0", 0xc7ba805f, 0xfdc7c97d, 0x6973710e), | |
1801 | PCMCIA_DEVICE_PROD_ID123("WORKBIT", "UltraNinja-16", "1", 0x28191418, 0xb70f4b09, 0x51de003a), | |
1802 | PCMCIA_DEVICE_NULL | |
1803 | }; | |
1804 | MODULE_DEVICE_TABLE(pcmcia, nsp_cs_ids); | |
1805 | ||
1da177e4 | 1806 | static struct pcmcia_driver nsp_driver = { |
1e212f36 DB |
1807 | .owner = THIS_MODULE, |
1808 | .drv = { | |
1809 | .name = "nsp_cs", | |
1da177e4 | 1810 | }, |
15b99ac1 | 1811 | .probe = nsp_cs_probe, |
cc3b4866 | 1812 | .remove = nsp_cs_detach, |
aba14100 | 1813 | .id_table = nsp_cs_ids, |
98e4c28b DB |
1814 | .suspend = nsp_cs_suspend, |
1815 | .resume = nsp_cs_resume, | |
1da177e4 | 1816 | }; |
1da177e4 LT |
1817 | |
1818 | static int __init nsp_cs_init(void) | |
1819 | { | |
1da177e4 LT |
1820 | nsp_msg(KERN_INFO, "loading..."); |
1821 | ||
1822 | return pcmcia_register_driver(&nsp_driver); | |
1da177e4 LT |
1823 | } |
1824 | ||
1825 | static void __exit nsp_cs_exit(void) | |
1826 | { | |
1827 | nsp_msg(KERN_INFO, "unloading..."); | |
1da177e4 | 1828 | pcmcia_unregister_driver(&nsp_driver); |
1da177e4 LT |
1829 | } |
1830 | ||
1831 | ||
1832 | module_init(nsp_cs_init) | |
1833 | module_exit(nsp_cs_exit) | |
1834 | ||
1835 | /* end */ |