Commit | Line | Data |
---|---|---|
635374e7 EM |
1 | /* |
2 | * This is the Fusion MPT base driver providing common API layer interface | |
3 | * for access to MPT (Message Passing Technology) firmware. | |
4 | * | |
5 | * This code is based on drivers/scsi/mpt2sas/mpt2_base.c | |
31b7f2e2 | 6 | * Copyright (C) 2007-2010 LSI Corporation |
635374e7 EM |
7 | * (mailto:DL-MPTFusionLinux@lsi.com) |
8 | * | |
9 | * This program is free software; you can redistribute it and/or | |
10 | * modify it under the terms of the GNU General Public License | |
11 | * as published by the Free Software Foundation; either version 2 | |
12 | * of the License, or (at your option) any later version. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * NO WARRANTY | |
20 | * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
21 | * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
22 | * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
23 | * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
24 | * solely responsible for determining the appropriateness of using and | |
25 | * distributing the Program and assumes all risks associated with its | |
26 | * exercise of rights under this Agreement, including but not limited to | |
27 | * the risks and costs of program errors, damage to or loss of data, | |
28 | * programs or equipment, and unavailability or interruption of operations. | |
29 | ||
30 | * DISCLAIMER OF LIABILITY | |
31 | * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
32 | * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
33 | * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
34 | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
35 | * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
36 | * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
37 | * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
38 | ||
39 | * You should have received a copy of the GNU General Public License | |
40 | * along with this program; if not, write to the Free Software | |
41 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, | |
42 | * USA. | |
43 | */ | |
44 | ||
45 | #include <linux/version.h> | |
46 | #include <linux/kernel.h> | |
47 | #include <linux/module.h> | |
48 | #include <linux/errno.h> | |
49 | #include <linux/init.h> | |
50 | #include <linux/slab.h> | |
51 | #include <linux/types.h> | |
52 | #include <linux/pci.h> | |
53 | #include <linux/kdev_t.h> | |
54 | #include <linux/blkdev.h> | |
55 | #include <linux/delay.h> | |
56 | #include <linux/interrupt.h> | |
57 | #include <linux/dma-mapping.h> | |
58 | #include <linux/sort.h> | |
59 | #include <linux/io.h> | |
a8ebd76c | 60 | #include <linux/time.h> |
ef7c80c1 | 61 | #include <linux/aer.h> |
635374e7 EM |
62 | |
63 | #include "mpt2sas_base.h" | |
64 | ||
65 | static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS]; | |
66 | ||
67 | #define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */ | |
635374e7 EM |
68 | |
69 | static int max_queue_depth = -1; | |
70 | module_param(max_queue_depth, int, 0); | |
71 | MODULE_PARM_DESC(max_queue_depth, " max controller queue depth "); | |
72 | ||
73 | static int max_sgl_entries = -1; | |
74 | module_param(max_sgl_entries, int, 0); | |
75 | MODULE_PARM_DESC(max_sgl_entries, " max sg entries "); | |
76 | ||
77 | static int msix_disable = -1; | |
78 | module_param(msix_disable, int, 0); | |
79 | MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); | |
80 | ||
6cb8ef57 KD |
81 | static int missing_delay[2] = {-1, -1}; |
82 | module_param_array(missing_delay, int, NULL, 0); | |
83 | MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay"); | |
84 | ||
32e0eb56 | 85 | /* diag_buffer_enable is bitwise |
1b01fe3a KD |
86 | * bit 0 set = TRACE |
87 | * bit 1 set = SNAPSHOT | |
88 | * bit 2 set = EXTENDED | |
32e0eb56 KD |
89 | * |
90 | * Either bit can be set, or both | |
91 | */ | |
92 | static int diag_buffer_enable; | |
93 | module_param(diag_buffer_enable, int, 0); | |
1b01fe3a KD |
94 | MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers " |
95 | "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)"); | |
32e0eb56 | 96 | |
fa7f3167 KD |
97 | int mpt2sas_fwfault_debug; |
98 | MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault " | |
99 | "and halt firmware - (default=0)"); | |
100 | ||
dd5fd332 KD |
101 | static int disable_discovery = -1; |
102 | module_param(disable_discovery, int, 0); | |
103 | MODULE_PARM_DESC(disable_discovery, " disable discovery "); | |
104 | ||
fa7f3167 KD |
105 | /** |
106 | * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug. | |
107 | * | |
108 | */ | |
109 | static int | |
110 | _scsih_set_fwfault_debug(const char *val, struct kernel_param *kp) | |
111 | { | |
112 | int ret = param_set_int(val, kp); | |
113 | struct MPT2SAS_ADAPTER *ioc; | |
114 | ||
115 | if (ret) | |
116 | return ret; | |
117 | ||
e75b9b6d | 118 | printk(KERN_INFO "setting fwfault_debug(%d)\n", mpt2sas_fwfault_debug); |
fa7f3167 KD |
119 | list_for_each_entry(ioc, &mpt2sas_ioc_list, list) |
120 | ioc->fwfault_debug = mpt2sas_fwfault_debug; | |
121 | return 0; | |
122 | } | |
123 | module_param_call(mpt2sas_fwfault_debug, _scsih_set_fwfault_debug, | |
124 | param_get_int, &mpt2sas_fwfault_debug, 0644); | |
125 | ||
635374e7 EM |
126 | /** |
127 | * _base_fault_reset_work - workq handling ioc fault conditions | |
128 | * @work: input argument, used to derive ioc | |
129 | * Context: sleep. | |
130 | * | |
131 | * Return nothing. | |
132 | */ | |
133 | static void | |
134 | _base_fault_reset_work(struct work_struct *work) | |
135 | { | |
136 | struct MPT2SAS_ADAPTER *ioc = | |
137 | container_of(work, struct MPT2SAS_ADAPTER, fault_reset_work.work); | |
138 | unsigned long flags; | |
139 | u32 doorbell; | |
140 | int rc; | |
141 | ||
142 | spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); | |
155dd4c7 | 143 | if (ioc->shost_recovery) |
635374e7 EM |
144 | goto rearm_timer; |
145 | spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); | |
146 | ||
147 | doorbell = mpt2sas_base_get_iocstate(ioc, 0); | |
148 | if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { | |
149 | rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, | |
150 | FORCE_BIG_HAMMER); | |
151 | printk(MPT2SAS_WARN_FMT "%s: hard reset: %s\n", ioc->name, | |
152 | __func__, (rc == 0) ? "success" : "failed"); | |
153 | doorbell = mpt2sas_base_get_iocstate(ioc, 0); | |
154 | if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) | |
155 | mpt2sas_base_fault_info(ioc, doorbell & | |
156 | MPI2_DOORBELL_DATA_MASK); | |
157 | } | |
158 | ||
159 | spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); | |
160 | rearm_timer: | |
161 | if (ioc->fault_reset_work_q) | |
162 | queue_delayed_work(ioc->fault_reset_work_q, | |
163 | &ioc->fault_reset_work, | |
164 | msecs_to_jiffies(FAULT_POLLING_INTERVAL)); | |
165 | spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); | |
166 | } | |
167 | ||
e4750c98 KD |
168 | /** |
169 | * mpt2sas_base_start_watchdog - start the fault_reset_work_q | |
cef7a12c | 170 | * @ioc: per adapter object |
e4750c98 KD |
171 | * Context: sleep. |
172 | * | |
173 | * Return nothing. | |
174 | */ | |
175 | void | |
176 | mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc) | |
177 | { | |
178 | unsigned long flags; | |
179 | ||
180 | if (ioc->fault_reset_work_q) | |
181 | return; | |
182 | ||
183 | /* initialize fault polling */ | |
184 | INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); | |
185 | snprintf(ioc->fault_reset_work_q_name, | |
186 | sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id); | |
187 | ioc->fault_reset_work_q = | |
188 | create_singlethread_workqueue(ioc->fault_reset_work_q_name); | |
189 | if (!ioc->fault_reset_work_q) { | |
190 | printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n", | |
191 | ioc->name, __func__, __LINE__); | |
192 | return; | |
193 | } | |
194 | spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); | |
195 | if (ioc->fault_reset_work_q) | |
196 | queue_delayed_work(ioc->fault_reset_work_q, | |
197 | &ioc->fault_reset_work, | |
198 | msecs_to_jiffies(FAULT_POLLING_INTERVAL)); | |
199 | spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); | |
200 | } | |
201 | ||
202 | /** | |
203 | * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q | |
cef7a12c | 204 | * @ioc: per adapter object |
e4750c98 KD |
205 | * Context: sleep. |
206 | * | |
207 | * Return nothing. | |
208 | */ | |
209 | void | |
210 | mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc) | |
211 | { | |
212 | unsigned long flags; | |
213 | struct workqueue_struct *wq; | |
214 | ||
215 | spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); | |
216 | wq = ioc->fault_reset_work_q; | |
217 | ioc->fault_reset_work_q = NULL; | |
218 | spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); | |
219 | if (wq) { | |
220 | if (!cancel_delayed_work(&ioc->fault_reset_work)) | |
221 | flush_workqueue(wq); | |
222 | destroy_workqueue(wq); | |
223 | } | |
224 | } | |
225 | ||
fa7f3167 KD |
226 | /** |
227 | * mpt2sas_base_fault_info - verbose translation of firmware FAULT code | |
228 | * @ioc: per adapter object | |
229 | * @fault_code: fault code | |
230 | * | |
231 | * Return nothing. | |
232 | */ | |
233 | void | |
234 | mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code) | |
235 | { | |
236 | printk(MPT2SAS_ERR_FMT "fault_state(0x%04x)!\n", | |
237 | ioc->name, fault_code); | |
238 | } | |
239 | ||
240 | /** | |
241 | * mpt2sas_halt_firmware - halt's mpt controller firmware | |
242 | * @ioc: per adapter object | |
243 | * | |
244 | * For debugging timeout related issues. Writing 0xCOFFEE00 | |
245 | * to the doorbell register will halt controller firmware. With | |
246 | * the purpose to stop both driver and firmware, the enduser can | |
247 | * obtain a ring buffer from controller UART. | |
248 | */ | |
249 | void | |
250 | mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc) | |
251 | { | |
252 | u32 doorbell; | |
253 | ||
254 | if (!ioc->fwfault_debug) | |
255 | return; | |
256 | ||
257 | dump_stack(); | |
258 | ||
259 | doorbell = readl(&ioc->chip->Doorbell); | |
260 | if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) | |
261 | mpt2sas_base_fault_info(ioc , doorbell); | |
262 | else { | |
263 | writel(0xC0FFEE00, &ioc->chip->Doorbell); | |
264 | printk(MPT2SAS_ERR_FMT "Firmware is halted due to command " | |
265 | "timeout\n", ioc->name); | |
266 | } | |
267 | ||
268 | panic("panic in %s\n", __func__); | |
269 | } | |
270 | ||
635374e7 EM |
271 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
272 | /** | |
273 | * _base_sas_ioc_info - verbose translation of the ioc status | |
cef7a12c | 274 | * @ioc: per adapter object |
635374e7 EM |
275 | * @mpi_reply: reply mf payload returned from firmware |
276 | * @request_hdr: request mf | |
277 | * | |
278 | * Return nothing. | |
279 | */ | |
280 | static void | |
281 | _base_sas_ioc_info(struct MPT2SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply, | |
282 | MPI2RequestHeader_t *request_hdr) | |
283 | { | |
284 | u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & | |
285 | MPI2_IOCSTATUS_MASK; | |
286 | char *desc = NULL; | |
287 | u16 frame_sz; | |
288 | char *func_str = NULL; | |
289 | ||
290 | /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */ | |
291 | if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || | |
292 | request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || | |
293 | request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION) | |
294 | return; | |
295 | ||
e94f6747 KD |
296 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) |
297 | return; | |
298 | ||
635374e7 EM |
299 | switch (ioc_status) { |
300 | ||
301 | /**************************************************************************** | |
302 | * Common IOCStatus values for all replies | |
303 | ****************************************************************************/ | |
304 | ||
305 | case MPI2_IOCSTATUS_INVALID_FUNCTION: | |
306 | desc = "invalid function"; | |
307 | break; | |
308 | case MPI2_IOCSTATUS_BUSY: | |
309 | desc = "busy"; | |
310 | break; | |
311 | case MPI2_IOCSTATUS_INVALID_SGL: | |
312 | desc = "invalid sgl"; | |
313 | break; | |
314 | case MPI2_IOCSTATUS_INTERNAL_ERROR: | |
315 | desc = "internal error"; | |
316 | break; | |
317 | case MPI2_IOCSTATUS_INVALID_VPID: | |
318 | desc = "invalid vpid"; | |
319 | break; | |
320 | case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: | |
321 | desc = "insufficient resources"; | |
322 | break; | |
323 | case MPI2_IOCSTATUS_INVALID_FIELD: | |
324 | desc = "invalid field"; | |
325 | break; | |
326 | case MPI2_IOCSTATUS_INVALID_STATE: | |
327 | desc = "invalid state"; | |
328 | break; | |
329 | case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED: | |
330 | desc = "op state not supported"; | |
331 | break; | |
332 | ||
333 | /**************************************************************************** | |
334 | * Config IOCStatus values | |
335 | ****************************************************************************/ | |
336 | ||
337 | case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION: | |
338 | desc = "config invalid action"; | |
339 | break; | |
340 | case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE: | |
341 | desc = "config invalid type"; | |
342 | break; | |
343 | case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE: | |
344 | desc = "config invalid page"; | |
345 | break; | |
346 | case MPI2_IOCSTATUS_CONFIG_INVALID_DATA: | |
347 | desc = "config invalid data"; | |
348 | break; | |
349 | case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS: | |
350 | desc = "config no defaults"; | |
351 | break; | |
352 | case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT: | |
353 | desc = "config cant commit"; | |
354 | break; | |
355 | ||
356 | /**************************************************************************** | |
357 | * SCSI IO Reply | |
358 | ****************************************************************************/ | |
359 | ||
360 | case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: | |
361 | case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: | |
362 | case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: | |
363 | case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: | |
364 | case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: | |
365 | case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: | |
366 | case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: | |
367 | case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: | |
368 | case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: | |
369 | case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: | |
370 | case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: | |
371 | case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: | |
372 | break; | |
373 | ||
374 | /**************************************************************************** | |
375 | * For use by SCSI Initiator and SCSI Target end-to-end data protection | |
376 | ****************************************************************************/ | |
377 | ||
378 | case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: | |
379 | desc = "eedp guard error"; | |
380 | break; | |
381 | case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: | |
382 | desc = "eedp ref tag error"; | |
383 | break; | |
384 | case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: | |
385 | desc = "eedp app tag error"; | |
386 | break; | |
387 | ||
388 | /**************************************************************************** | |
389 | * SCSI Target values | |
390 | ****************************************************************************/ | |
391 | ||
392 | case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX: | |
393 | desc = "target invalid io index"; | |
394 | break; | |
395 | case MPI2_IOCSTATUS_TARGET_ABORTED: | |
396 | desc = "target aborted"; | |
397 | break; | |
398 | case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: | |
399 | desc = "target no conn retryable"; | |
400 | break; | |
401 | case MPI2_IOCSTATUS_TARGET_NO_CONNECTION: | |
402 | desc = "target no connection"; | |
403 | break; | |
404 | case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: | |
405 | desc = "target xfer count mismatch"; | |
406 | break; | |
407 | case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: | |
408 | desc = "target data offset error"; | |
409 | break; | |
410 | case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: | |
411 | desc = "target too much write data"; | |
412 | break; | |
413 | case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT: | |
414 | desc = "target iu too short"; | |
415 | break; | |
416 | case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: | |
417 | desc = "target ack nak timeout"; | |
418 | break; | |
419 | case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED: | |
420 | desc = "target nak received"; | |
421 | break; | |
422 | ||
423 | /**************************************************************************** | |
424 | * Serial Attached SCSI values | |
425 | ****************************************************************************/ | |
426 | ||
427 | case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED: | |
428 | desc = "smp request failed"; | |
429 | break; | |
430 | case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN: | |
431 | desc = "smp data overrun"; | |
432 | break; | |
433 | ||
434 | /**************************************************************************** | |
435 | * Diagnostic Buffer Post / Diagnostic Release values | |
436 | ****************************************************************************/ | |
437 | ||
438 | case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED: | |
439 | desc = "diagnostic released"; | |
440 | break; | |
441 | default: | |
442 | break; | |
443 | } | |
444 | ||
445 | if (!desc) | |
446 | return; | |
447 | ||
448 | switch (request_hdr->Function) { | |
449 | case MPI2_FUNCTION_CONFIG: | |
450 | frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size; | |
451 | func_str = "config_page"; | |
452 | break; | |
453 | case MPI2_FUNCTION_SCSI_TASK_MGMT: | |
454 | frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t); | |
455 | func_str = "task_mgmt"; | |
456 | break; | |
457 | case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: | |
458 | frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t); | |
459 | func_str = "sas_iounit_ctl"; | |
460 | break; | |
461 | case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR: | |
462 | frame_sz = sizeof(Mpi2SepRequest_t); | |
463 | func_str = "enclosure"; | |
464 | break; | |
465 | case MPI2_FUNCTION_IOC_INIT: | |
466 | frame_sz = sizeof(Mpi2IOCInitRequest_t); | |
467 | func_str = "ioc_init"; | |
468 | break; | |
469 | case MPI2_FUNCTION_PORT_ENABLE: | |
470 | frame_sz = sizeof(Mpi2PortEnableRequest_t); | |
471 | func_str = "port_enable"; | |
472 | break; | |
473 | case MPI2_FUNCTION_SMP_PASSTHROUGH: | |
474 | frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size; | |
475 | func_str = "smp_passthru"; | |
476 | break; | |
477 | default: | |
478 | frame_sz = 32; | |
479 | func_str = "unknown"; | |
480 | break; | |
481 | } | |
482 | ||
483 | printk(MPT2SAS_WARN_FMT "ioc_status: %s(0x%04x), request(0x%p)," | |
484 | " (%s)\n", ioc->name, desc, ioc_status, request_hdr, func_str); | |
485 | ||
486 | _debug_dump_mf(request_hdr, frame_sz/4); | |
487 | } | |
488 | ||
489 | /** | |
490 | * _base_display_event_data - verbose translation of firmware asyn events | |
cef7a12c | 491 | * @ioc: per adapter object |
635374e7 EM |
492 | * @mpi_reply: reply mf payload returned from firmware |
493 | * | |
494 | * Return nothing. | |
495 | */ | |
496 | static void | |
497 | _base_display_event_data(struct MPT2SAS_ADAPTER *ioc, | |
498 | Mpi2EventNotificationReply_t *mpi_reply) | |
499 | { | |
500 | char *desc = NULL; | |
501 | u16 event; | |
502 | ||
503 | if (!(ioc->logging_level & MPT_DEBUG_EVENTS)) | |
504 | return; | |
505 | ||
506 | event = le16_to_cpu(mpi_reply->Event); | |
507 | ||
508 | switch (event) { | |
509 | case MPI2_EVENT_LOG_DATA: | |
510 | desc = "Log Data"; | |
511 | break; | |
512 | case MPI2_EVENT_STATE_CHANGE: | |
513 | desc = "Status Change"; | |
514 | break; | |
515 | case MPI2_EVENT_HARD_RESET_RECEIVED: | |
516 | desc = "Hard Reset Received"; | |
517 | break; | |
518 | case MPI2_EVENT_EVENT_CHANGE: | |
519 | desc = "Event Change"; | |
520 | break; | |
635374e7 EM |
521 | case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: |
522 | desc = "Device Status Change"; | |
523 | break; | |
524 | case MPI2_EVENT_IR_OPERATION_STATUS: | |
525 | desc = "IR Operation Status"; | |
526 | break; | |
527 | case MPI2_EVENT_SAS_DISCOVERY: | |
e94f6747 KD |
528 | { |
529 | Mpi2EventDataSasDiscovery_t *event_data = | |
530 | (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData; | |
531 | printk(MPT2SAS_INFO_FMT "Discovery: (%s)", ioc->name, | |
532 | (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? | |
533 | "start" : "stop"); | |
534 | if (event_data->DiscoveryStatus) | |
535 | printk("discovery_status(0x%08x)", | |
536 | le32_to_cpu(event_data->DiscoveryStatus)); | |
7968f194 | 537 | printk("\n"); |
e94f6747 KD |
538 | return; |
539 | } | |
635374e7 EM |
540 | case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: |
541 | desc = "SAS Broadcast Primitive"; | |
542 | break; | |
543 | case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: | |
544 | desc = "SAS Init Device Status Change"; | |
545 | break; | |
546 | case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW: | |
547 | desc = "SAS Init Table Overflow"; | |
548 | break; | |
549 | case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: | |
550 | desc = "SAS Topology Change List"; | |
551 | break; | |
552 | case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: | |
553 | desc = "SAS Enclosure Device Status Change"; | |
554 | break; | |
555 | case MPI2_EVENT_IR_VOLUME: | |
556 | desc = "IR Volume"; | |
557 | break; | |
558 | case MPI2_EVENT_IR_PHYSICAL_DISK: | |
559 | desc = "IR Physical Disk"; | |
560 | break; | |
561 | case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: | |
562 | desc = "IR Configuration Change List"; | |
563 | break; | |
564 | case MPI2_EVENT_LOG_ENTRY_ADDED: | |
565 | desc = "Log Entry Added"; | |
566 | break; | |
567 | } | |
568 | ||
569 | if (!desc) | |
570 | return; | |
571 | ||
572 | printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, desc); | |
573 | } | |
574 | #endif | |
575 | ||
576 | /** | |
577 | * _base_sas_log_info - verbose translation of firmware log info | |
cef7a12c | 578 | * @ioc: per adapter object |
635374e7 EM |
579 | * @log_info: log info |
580 | * | |
581 | * Return nothing. | |
582 | */ | |
583 | static void | |
584 | _base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info) | |
585 | { | |
586 | union loginfo_type { | |
587 | u32 loginfo; | |
588 | struct { | |
589 | u32 subcode:16; | |
590 | u32 code:8; | |
591 | u32 originator:4; | |
592 | u32 bus_type:4; | |
593 | } dw; | |
594 | }; | |
595 | union loginfo_type sas_loginfo; | |
596 | char *originator_str = NULL; | |
597 | ||
598 | sas_loginfo.loginfo = log_info; | |
599 | if (sas_loginfo.dw.bus_type != 3 /*SAS*/) | |
600 | return; | |
601 | ||
be9e8cd7 KD |
602 | /* each nexus loss loginfo */ |
603 | if (log_info == 0x31170000) | |
604 | return; | |
605 | ||
635374e7 EM |
606 | /* eat the loginfos associated with task aborts */ |
607 | if (ioc->ignore_loginfos && (log_info == 30050000 || log_info == | |
608 | 0x31140000 || log_info == 0x31130000)) | |
609 | return; | |
610 | ||
611 | switch (sas_loginfo.dw.originator) { | |
612 | case 0: | |
613 | originator_str = "IOP"; | |
614 | break; | |
615 | case 1: | |
616 | originator_str = "PL"; | |
617 | break; | |
618 | case 2: | |
619 | originator_str = "IR"; | |
620 | break; | |
621 | } | |
622 | ||
623 | printk(MPT2SAS_WARN_FMT "log_info(0x%08x): originator(%s), " | |
624 | "code(0x%02x), sub_code(0x%04x)\n", ioc->name, log_info, | |
625 | originator_str, sas_loginfo.dw.code, | |
626 | sas_loginfo.dw.subcode); | |
627 | } | |
628 | ||
635374e7 EM |
629 | /** |
630 | * _base_display_reply_info - | |
cef7a12c | 631 | * @ioc: per adapter object |
635374e7 | 632 | * @smid: system request message index |
7b936b02 | 633 | * @msix_index: MSIX table index supplied by the OS |
635374e7 EM |
634 | * @reply: reply message frame(lower 32bit addr) |
635 | * | |
636 | * Return nothing. | |
637 | */ | |
638 | static void | |
7b936b02 | 639 | _base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, |
635374e7 EM |
640 | u32 reply) |
641 | { | |
642 | MPI2DefaultReply_t *mpi_reply; | |
643 | u16 ioc_status; | |
644 | ||
645 | mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); | |
646 | ioc_status = le16_to_cpu(mpi_reply->IOCStatus); | |
647 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING | |
648 | if ((ioc_status & MPI2_IOCSTATUS_MASK) && | |
649 | (ioc->logging_level & MPT_DEBUG_REPLY)) { | |
650 | _base_sas_ioc_info(ioc , mpi_reply, | |
651 | mpt2sas_base_get_msg_frame(ioc, smid)); | |
652 | } | |
653 | #endif | |
654 | if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) | |
655 | _base_sas_log_info(ioc, le32_to_cpu(mpi_reply->IOCLogInfo)); | |
656 | } | |
657 | ||
658 | /** | |
659 | * mpt2sas_base_done - base internal command completion routine | |
cef7a12c | 660 | * @ioc: per adapter object |
635374e7 | 661 | * @smid: system request message index |
7b936b02 | 662 | * @msix_index: MSIX table index supplied by the OS |
635374e7 EM |
663 | * @reply: reply message frame(lower 32bit addr) |
664 | * | |
77e63ed4 KD |
665 | * Return 1 meaning mf should be freed from _base_interrupt |
666 | * 0 means the mf is freed from this function. | |
635374e7 | 667 | */ |
77e63ed4 | 668 | u8 |
7b936b02 KD |
669 | mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, |
670 | u32 reply) | |
635374e7 EM |
671 | { |
672 | MPI2DefaultReply_t *mpi_reply; | |
673 | ||
674 | mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); | |
675 | if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK) | |
77e63ed4 | 676 | return 1; |
635374e7 EM |
677 | |
678 | if (ioc->base_cmds.status == MPT2_CMD_NOT_USED) | |
77e63ed4 | 679 | return 1; |
635374e7 EM |
680 | |
681 | ioc->base_cmds.status |= MPT2_CMD_COMPLETE; | |
682 | if (mpi_reply) { | |
683 | ioc->base_cmds.status |= MPT2_CMD_REPLY_VALID; | |
684 | memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); | |
685 | } | |
686 | ioc->base_cmds.status &= ~MPT2_CMD_PENDING; | |
687 | complete(&ioc->base_cmds.done); | |
77e63ed4 | 688 | return 1; |
635374e7 EM |
689 | } |
690 | ||
691 | /** | |
692 | * _base_async_event - main callback handler for firmware asyn events | |
cef7a12c | 693 | * @ioc: per adapter object |
7b936b02 | 694 | * @msix_index: MSIX table index supplied by the OS |
635374e7 EM |
695 | * @reply: reply message frame(lower 32bit addr) |
696 | * | |
77e63ed4 KD |
697 | * Return 1 meaning mf should be freed from _base_interrupt |
698 | * 0 means the mf is freed from this function. | |
635374e7 | 699 | */ |
77e63ed4 | 700 | static u8 |
7b936b02 | 701 | _base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply) |
635374e7 EM |
702 | { |
703 | Mpi2EventNotificationReply_t *mpi_reply; | |
704 | Mpi2EventAckRequest_t *ack_request; | |
705 | u16 smid; | |
706 | ||
707 | mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); | |
708 | if (!mpi_reply) | |
77e63ed4 | 709 | return 1; |
635374e7 | 710 | if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION) |
77e63ed4 | 711 | return 1; |
635374e7 EM |
712 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
713 | _base_display_event_data(ioc, mpi_reply); | |
714 | #endif | |
715 | if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED)) | |
716 | goto out; | |
717 | smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); | |
718 | if (!smid) { | |
719 | printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", | |
720 | ioc->name, __func__); | |
721 | goto out; | |
722 | } | |
723 | ||
724 | ack_request = mpt2sas_base_get_msg_frame(ioc, smid); | |
725 | memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t)); | |
726 | ack_request->Function = MPI2_FUNCTION_EVENT_ACK; | |
727 | ack_request->Event = mpi_reply->Event; | |
728 | ack_request->EventContext = mpi_reply->EventContext; | |
7b936b02 KD |
729 | ack_request->VF_ID = 0; /* TODO */ |
730 | ack_request->VP_ID = 0; | |
731 | mpt2sas_base_put_smid_default(ioc, smid); | |
635374e7 EM |
732 | |
733 | out: | |
734 | ||
735 | /* scsih callback handler */ | |
7b936b02 | 736 | mpt2sas_scsih_event_callback(ioc, msix_index, reply); |
635374e7 EM |
737 | |
738 | /* ctl callback handler */ | |
7b936b02 | 739 | mpt2sas_ctl_event_callback(ioc, msix_index, reply); |
77e63ed4 KD |
740 | |
741 | return 1; | |
635374e7 EM |
742 | } |
743 | ||
595bb0bd KD |
744 | /** |
745 | * _base_get_cb_idx - obtain the callback index | |
746 | * @ioc: per adapter object | |
747 | * @smid: system request message index | |
748 | * | |
749 | * Return callback index. | |
750 | */ | |
751 | static u8 | |
752 | _base_get_cb_idx(struct MPT2SAS_ADAPTER *ioc, u16 smid) | |
753 | { | |
754 | int i; | |
755 | u8 cb_idx = 0xFF; | |
756 | ||
757 | if (smid >= ioc->hi_priority_smid) { | |
758 | if (smid < ioc->internal_smid) { | |
759 | i = smid - ioc->hi_priority_smid; | |
760 | cb_idx = ioc->hpr_lookup[i].cb_idx; | |
dd3741d3 | 761 | } else if (smid <= ioc->hba_queue_depth) { |
595bb0bd KD |
762 | i = smid - ioc->internal_smid; |
763 | cb_idx = ioc->internal_lookup[i].cb_idx; | |
764 | } | |
765 | } else { | |
766 | i = smid - 1; | |
767 | cb_idx = ioc->scsi_lookup[i].cb_idx; | |
768 | } | |
769 | return cb_idx; | |
770 | } | |
771 | ||
635374e7 EM |
772 | /** |
773 | * _base_mask_interrupts - disable interrupts | |
cef7a12c | 774 | * @ioc: per adapter object |
635374e7 EM |
775 | * |
776 | * Disabling ResetIRQ, Reply and Doorbell Interrupts | |
777 | * | |
778 | * Return nothing. | |
779 | */ | |
780 | static void | |
781 | _base_mask_interrupts(struct MPT2SAS_ADAPTER *ioc) | |
782 | { | |
783 | u32 him_register; | |
784 | ||
785 | ioc->mask_interrupts = 1; | |
786 | him_register = readl(&ioc->chip->HostInterruptMask); | |
787 | him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK; | |
788 | writel(him_register, &ioc->chip->HostInterruptMask); | |
789 | readl(&ioc->chip->HostInterruptMask); | |
790 | } | |
791 | ||
792 | /** | |
793 | * _base_unmask_interrupts - enable interrupts | |
cef7a12c | 794 | * @ioc: per adapter object |
635374e7 EM |
795 | * |
796 | * Enabling only Reply Interrupts | |
797 | * | |
798 | * Return nothing. | |
799 | */ | |
800 | static void | |
801 | _base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc) | |
802 | { | |
803 | u32 him_register; | |
804 | ||
635374e7 EM |
805 | him_register = readl(&ioc->chip->HostInterruptMask); |
806 | him_register &= ~MPI2_HIM_RIM; | |
807 | writel(him_register, &ioc->chip->HostInterruptMask); | |
808 | ioc->mask_interrupts = 0; | |
809 | } | |
810 | ||
5b768581 KD |
811 | union reply_descriptor { |
812 | u64 word; | |
813 | struct { | |
814 | u32 low; | |
815 | u32 high; | |
816 | } u; | |
817 | }; | |
818 | ||
635374e7 EM |
819 | /** |
820 | * _base_interrupt - MPT adapter (IOC) specific interrupt handler. | |
821 | * @irq: irq number (not used) | |
822 | * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure | |
823 | * @r: pt_regs pointer (not used) | |
824 | * | |
825 | * Return IRQ_HANDLE if processed, else IRQ_NONE. | |
826 | */ | |
827 | static irqreturn_t | |
828 | _base_interrupt(int irq, void *bus_id) | |
829 | { | |
03ea1115 | 830 | union reply_descriptor rd; |
5b768581 | 831 | u32 completed_cmds; |
635374e7 EM |
832 | u8 request_desript_type; |
833 | u16 smid; | |
834 | u8 cb_idx; | |
835 | u32 reply; | |
7b936b02 | 836 | u8 msix_index; |
635374e7 | 837 | struct MPT2SAS_ADAPTER *ioc = bus_id; |
5b768581 | 838 | Mpi2ReplyDescriptorsUnion_t *rpf; |
77e63ed4 | 839 | u8 rc; |
635374e7 EM |
840 | |
841 | if (ioc->mask_interrupts) | |
842 | return IRQ_NONE; | |
843 | ||
5b768581 KD |
844 | rpf = &ioc->reply_post_free[ioc->reply_post_host_index]; |
845 | request_desript_type = rpf->Default.ReplyFlags | |
846 | & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; | |
635374e7 EM |
847 | if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) |
848 | return IRQ_NONE; | |
849 | ||
850 | completed_cmds = 0; | |
dd3741d3 | 851 | cb_idx = 0xFF; |
635374e7 | 852 | do { |
5b768581 | 853 | rd.word = rpf->Words; |
03ea1115 | 854 | if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX) |
635374e7 EM |
855 | goto out; |
856 | reply = 0; | |
857 | cb_idx = 0xFF; | |
5b768581 | 858 | smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1); |
7b936b02 | 859 | msix_index = rpf->Default.MSIxIndex; |
635374e7 EM |
860 | if (request_desript_type == |
861 | MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) { | |
5b768581 KD |
862 | reply = le32_to_cpu |
863 | (rpf->AddressReply.ReplyFrameAddress); | |
dd3741d3 KD |
864 | if (reply > ioc->reply_dma_max_address || |
865 | reply < ioc->reply_dma_min_address) | |
866 | reply = 0; | |
635374e7 EM |
867 | } else if (request_desript_type == |
868 | MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER) | |
869 | goto next; | |
870 | else if (request_desript_type == | |
871 | MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS) | |
872 | goto next; | |
873 | if (smid) | |
595bb0bd | 874 | cb_idx = _base_get_cb_idx(ioc, smid); |
635374e7 | 875 | if (smid && cb_idx != 0xFF) { |
77e63ed4 | 876 | rc = mpt_callbacks[cb_idx](ioc, smid, msix_index, |
595bb0bd | 877 | reply); |
635374e7 | 878 | if (reply) |
7b936b02 | 879 | _base_display_reply_info(ioc, smid, msix_index, |
635374e7 | 880 | reply); |
77e63ed4 KD |
881 | if (rc) |
882 | mpt2sas_base_free_smid(ioc, smid); | |
635374e7 EM |
883 | } |
884 | if (!smid) | |
7b936b02 | 885 | _base_async_event(ioc, msix_index, reply); |
635374e7 EM |
886 | |
887 | /* reply free queue handling */ | |
888 | if (reply) { | |
889 | ioc->reply_free_host_index = | |
890 | (ioc->reply_free_host_index == | |
891 | (ioc->reply_free_queue_depth - 1)) ? | |
892 | 0 : ioc->reply_free_host_index + 1; | |
893 | ioc->reply_free[ioc->reply_free_host_index] = | |
894 | cpu_to_le32(reply); | |
5b768581 | 895 | wmb(); |
635374e7 EM |
896 | writel(ioc->reply_free_host_index, |
897 | &ioc->chip->ReplyFreeHostIndex); | |
635374e7 EM |
898 | } |
899 | ||
900 | next: | |
5b768581 KD |
901 | |
902 | rpf->Words = ULLONG_MAX; | |
903 | ioc->reply_post_host_index = (ioc->reply_post_host_index == | |
904 | (ioc->reply_post_queue_depth - 1)) ? 0 : | |
905 | ioc->reply_post_host_index + 1; | |
635374e7 | 906 | request_desript_type = |
5b768581 KD |
907 | ioc->reply_post_free[ioc->reply_post_host_index].Default. |
908 | ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; | |
635374e7 EM |
909 | completed_cmds++; |
910 | if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) | |
911 | goto out; | |
5b768581 KD |
912 | if (!ioc->reply_post_host_index) |
913 | rpf = ioc->reply_post_free; | |
914 | else | |
915 | rpf++; | |
635374e7 EM |
916 | } while (1); |
917 | ||
918 | out: | |
919 | ||
920 | if (!completed_cmds) | |
921 | return IRQ_NONE; | |
922 | ||
635374e7 | 923 | wmb(); |
5b768581 | 924 | writel(ioc->reply_post_host_index, &ioc->chip->ReplyPostHostIndex); |
635374e7 EM |
925 | return IRQ_HANDLED; |
926 | } | |
927 | ||
928 | /** | |
929 | * mpt2sas_base_release_callback_handler - clear interupt callback handler | |
930 | * @cb_idx: callback index | |
931 | * | |
932 | * Return nothing. | |
933 | */ | |
934 | void | |
935 | mpt2sas_base_release_callback_handler(u8 cb_idx) | |
936 | { | |
937 | mpt_callbacks[cb_idx] = NULL; | |
938 | } | |
939 | ||
940 | /** | |
941 | * mpt2sas_base_register_callback_handler - obtain index for the interrupt callback handler | |
942 | * @cb_func: callback function | |
943 | * | |
944 | * Returns cb_func. | |
945 | */ | |
946 | u8 | |
947 | mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func) | |
948 | { | |
949 | u8 cb_idx; | |
950 | ||
951 | for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--) | |
952 | if (mpt_callbacks[cb_idx] == NULL) | |
953 | break; | |
954 | ||
955 | mpt_callbacks[cb_idx] = cb_func; | |
956 | return cb_idx; | |
957 | } | |
958 | ||
959 | /** | |
960 | * mpt2sas_base_initialize_callback_handler - initialize the interrupt callback handler | |
961 | * | |
962 | * Return nothing. | |
963 | */ | |
964 | void | |
965 | mpt2sas_base_initialize_callback_handler(void) | |
966 | { | |
967 | u8 cb_idx; | |
968 | ||
969 | for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++) | |
970 | mpt2sas_base_release_callback_handler(cb_idx); | |
971 | } | |
972 | ||
973 | /** | |
974 | * mpt2sas_base_build_zero_len_sge - build zero length sg entry | |
975 | * @ioc: per adapter object | |
976 | * @paddr: virtual address for SGE | |
977 | * | |
978 | * Create a zero length scatter gather entry to insure the IOCs hardware has | |
979 | * something to use if the target device goes brain dead and tries | |
980 | * to send data even when none is asked for. | |
981 | * | |
982 | * Return nothing. | |
983 | */ | |
984 | void | |
985 | mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr) | |
986 | { | |
987 | u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT | | |
988 | MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST | | |
989 | MPI2_SGE_FLAGS_SIMPLE_ELEMENT) << | |
990 | MPI2_SGE_FLAGS_SHIFT); | |
991 | ioc->base_add_sg_single(paddr, flags_length, -1); | |
992 | } | |
993 | ||
994 | /** | |
995 | * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr. | |
996 | * @paddr: virtual address for SGE | |
997 | * @flags_length: SGE flags and data transfer length | |
998 | * @dma_addr: Physical address | |
999 | * | |
1000 | * Return nothing. | |
1001 | */ | |
1002 | static void | |
1003 | _base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr) | |
1004 | { | |
1005 | Mpi2SGESimple32_t *sgel = paddr; | |
1006 | ||
1007 | flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING | | |
1008 | MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; | |
1009 | sgel->FlagsLength = cpu_to_le32(flags_length); | |
1010 | sgel->Address = cpu_to_le32(dma_addr); | |
1011 | } | |
1012 | ||
1013 | ||
1014 | /** | |
1015 | * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr. | |
1016 | * @paddr: virtual address for SGE | |
1017 | * @flags_length: SGE flags and data transfer length | |
1018 | * @dma_addr: Physical address | |
1019 | * | |
1020 | * Return nothing. | |
1021 | */ | |
1022 | static void | |
1023 | _base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr) | |
1024 | { | |
1025 | Mpi2SGESimple64_t *sgel = paddr; | |
1026 | ||
1027 | flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING | | |
1028 | MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; | |
1029 | sgel->FlagsLength = cpu_to_le32(flags_length); | |
1030 | sgel->Address = cpu_to_le64(dma_addr); | |
1031 | } | |
1032 | ||
1033 | #define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10)) | |
1034 | ||
1035 | /** | |
1036 | * _base_config_dma_addressing - set dma addressing | |
1037 | * @ioc: per adapter object | |
1038 | * @pdev: PCI device struct | |
1039 | * | |
1040 | * Returns 0 for success, non-zero for failure. | |
1041 | */ | |
1042 | static int | |
1043 | _base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev) | |
1044 | { | |
1045 | struct sysinfo s; | |
1046 | char *desc = NULL; | |
1047 | ||
1048 | if (sizeof(dma_addr_t) > 4) { | |
1049 | const uint64_t required_mask = | |
1050 | dma_get_required_mask(&pdev->dev); | |
e930438c YH |
1051 | if ((required_mask > DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev, |
1052 | DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev, | |
1053 | DMA_BIT_MASK(64))) { | |
635374e7 EM |
1054 | ioc->base_add_sg_single = &_base_add_sg_single_64; |
1055 | ioc->sge_size = sizeof(Mpi2SGESimple64_t); | |
1056 | desc = "64"; | |
1057 | goto out; | |
1058 | } | |
1059 | } | |
1060 | ||
e930438c YH |
1061 | if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) |
1062 | && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { | |
635374e7 EM |
1063 | ioc->base_add_sg_single = &_base_add_sg_single_32; |
1064 | ioc->sge_size = sizeof(Mpi2SGESimple32_t); | |
1065 | desc = "32"; | |
1066 | } else | |
1067 | return -ENODEV; | |
1068 | ||
1069 | out: | |
1070 | si_meminfo(&s); | |
1071 | printk(MPT2SAS_INFO_FMT "%s BIT PCI BUS DMA ADDRESSING SUPPORTED, " | |
1072 | "total mem (%ld kB)\n", ioc->name, desc, convert_to_kb(s.totalram)); | |
1073 | ||
1074 | return 0; | |
1075 | } | |
1076 | ||
1077 | /** | |
1078 | * _base_save_msix_table - backup msix vector table | |
1079 | * @ioc: per adapter object | |
1080 | * | |
1081 | * This address an errata where diag reset clears out the table | |
1082 | */ | |
1083 | static void | |
1084 | _base_save_msix_table(struct MPT2SAS_ADAPTER *ioc) | |
1085 | { | |
1086 | int i; | |
1087 | ||
1088 | if (!ioc->msix_enable || ioc->msix_table_backup == NULL) | |
1089 | return; | |
1090 | ||
1091 | for (i = 0; i < ioc->msix_vector_count; i++) | |
1092 | ioc->msix_table_backup[i] = ioc->msix_table[i]; | |
1093 | } | |
1094 | ||
1095 | /** | |
1096 | * _base_restore_msix_table - this restores the msix vector table | |
1097 | * @ioc: per adapter object | |
1098 | * | |
1099 | */ | |
1100 | static void | |
1101 | _base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc) | |
1102 | { | |
1103 | int i; | |
1104 | ||
1105 | if (!ioc->msix_enable || ioc->msix_table_backup == NULL) | |
1106 | return; | |
1107 | ||
1108 | for (i = 0; i < ioc->msix_vector_count; i++) | |
1109 | ioc->msix_table[i] = ioc->msix_table_backup[i]; | |
1110 | } | |
1111 | ||
1112 | /** | |
1113 | * _base_check_enable_msix - checks MSIX capabable. | |
1114 | * @ioc: per adapter object | |
1115 | * | |
1116 | * Check to see if card is capable of MSIX, and set number | |
1117 | * of avaliable msix vectors | |
1118 | */ | |
1119 | static int | |
1120 | _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc) | |
1121 | { | |
1122 | int base; | |
1123 | u16 message_control; | |
1124 | u32 msix_table_offset; | |
1125 | ||
1126 | base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); | |
1127 | if (!base) { | |
1128 | dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not " | |
1129 | "supported\n", ioc->name)); | |
1130 | return -EINVAL; | |
1131 | } | |
1132 | ||
1133 | /* get msix vector count */ | |
1134 | pci_read_config_word(ioc->pdev, base + 2, &message_control); | |
1135 | ioc->msix_vector_count = (message_control & 0x3FF) + 1; | |
1136 | ||
1137 | /* get msix table */ | |
1138 | pci_read_config_dword(ioc->pdev, base + 4, &msix_table_offset); | |
1139 | msix_table_offset &= 0xFFFFFFF8; | |
1140 | ioc->msix_table = (u32 *)((void *)ioc->chip + msix_table_offset); | |
1141 | ||
1142 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "msix is supported, " | |
1143 | "vector_count(%d), table_offset(0x%08x), table(%p)\n", ioc->name, | |
1144 | ioc->msix_vector_count, msix_table_offset, ioc->msix_table)); | |
1145 | return 0; | |
1146 | } | |
1147 | ||
1148 | /** | |
1149 | * _base_disable_msix - disables msix | |
1150 | * @ioc: per adapter object | |
1151 | * | |
1152 | */ | |
1153 | static void | |
1154 | _base_disable_msix(struct MPT2SAS_ADAPTER *ioc) | |
1155 | { | |
1156 | if (ioc->msix_enable) { | |
1157 | pci_disable_msix(ioc->pdev); | |
1158 | kfree(ioc->msix_table_backup); | |
1159 | ioc->msix_table_backup = NULL; | |
1160 | ioc->msix_enable = 0; | |
1161 | } | |
1162 | } | |
1163 | ||
1164 | /** | |
1165 | * _base_enable_msix - enables msix, failback to io_apic | |
1166 | * @ioc: per adapter object | |
1167 | * | |
1168 | */ | |
1169 | static int | |
1170 | _base_enable_msix(struct MPT2SAS_ADAPTER *ioc) | |
1171 | { | |
1172 | struct msix_entry entries; | |
1173 | int r; | |
1174 | u8 try_msix = 0; | |
1175 | ||
1176 | if (msix_disable == -1 || msix_disable == 0) | |
1177 | try_msix = 1; | |
1178 | ||
1179 | if (!try_msix) | |
1180 | goto try_ioapic; | |
1181 | ||
1182 | if (_base_check_enable_msix(ioc) != 0) | |
1183 | goto try_ioapic; | |
1184 | ||
1185 | ioc->msix_table_backup = kcalloc(ioc->msix_vector_count, | |
1186 | sizeof(u32), GFP_KERNEL); | |
1187 | if (!ioc->msix_table_backup) { | |
1188 | dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for " | |
1189 | "msix_table_backup failed!!!\n", ioc->name)); | |
1190 | goto try_ioapic; | |
1191 | } | |
1192 | ||
1193 | memset(&entries, 0, sizeof(struct msix_entry)); | |
1194 | r = pci_enable_msix(ioc->pdev, &entries, 1); | |
1195 | if (r) { | |
1196 | dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "pci_enable_msix " | |
1197 | "failed (r=%d) !!!\n", ioc->name, r)); | |
1198 | goto try_ioapic; | |
1199 | } | |
1200 | ||
1201 | r = request_irq(entries.vector, _base_interrupt, IRQF_SHARED, | |
1202 | ioc->name, ioc); | |
1203 | if (r) { | |
1204 | dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "unable to allocate " | |
1205 | "interrupt %d !!!\n", ioc->name, entries.vector)); | |
1206 | pci_disable_msix(ioc->pdev); | |
1207 | goto try_ioapic; | |
1208 | } | |
1209 | ||
1210 | ioc->pci_irq = entries.vector; | |
1211 | ioc->msix_enable = 1; | |
1212 | return 0; | |
1213 | ||
1214 | /* failback to io_apic interrupt routing */ | |
1215 | try_ioapic: | |
1216 | ||
1217 | r = request_irq(ioc->pdev->irq, _base_interrupt, IRQF_SHARED, | |
1218 | ioc->name, ioc); | |
1219 | if (r) { | |
1220 | printk(MPT2SAS_ERR_FMT "unable to allocate interrupt %d!\n", | |
1221 | ioc->name, ioc->pdev->irq); | |
1222 | r = -EBUSY; | |
1223 | goto out_fail; | |
1224 | } | |
1225 | ||
1226 | ioc->pci_irq = ioc->pdev->irq; | |
1227 | return 0; | |
1228 | ||
1229 | out_fail: | |
1230 | return r; | |
1231 | } | |
1232 | ||
1233 | /** | |
1234 | * mpt2sas_base_map_resources - map in controller resources (io/irq/memap) | |
1235 | * @ioc: per adapter object | |
1236 | * | |
1237 | * Returns 0 for success, non-zero for failure. | |
1238 | */ | |
1239 | int | |
1240 | mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc) | |
1241 | { | |
1242 | struct pci_dev *pdev = ioc->pdev; | |
1243 | u32 memap_sz; | |
1244 | u32 pio_sz; | |
1245 | int i, r = 0; | |
6846e75c KD |
1246 | u64 pio_chip = 0; |
1247 | u64 chip_phys = 0; | |
635374e7 | 1248 | |
eabb08ad | 1249 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", |
635374e7 EM |
1250 | ioc->name, __func__)); |
1251 | ||
1252 | ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); | |
1253 | if (pci_enable_device_mem(pdev)) { | |
1254 | printk(MPT2SAS_WARN_FMT "pci_enable_device_mem: " | |
1255 | "failed\n", ioc->name); | |
1256 | return -ENODEV; | |
1257 | } | |
1258 | ||
1259 | ||
1260 | if (pci_request_selected_regions(pdev, ioc->bars, | |
1261 | MPT2SAS_DRIVER_NAME)) { | |
1262 | printk(MPT2SAS_WARN_FMT "pci_request_selected_regions: " | |
1263 | "failed\n", ioc->name); | |
1264 | r = -ENODEV; | |
1265 | goto out_fail; | |
1266 | } | |
1267 | ||
ef7c80c1 KD |
1268 | /* AER (Advanced Error Reporting) hooks */ |
1269 | pci_enable_pcie_error_reporting(pdev); | |
1270 | ||
635374e7 EM |
1271 | pci_set_master(pdev); |
1272 | ||
1273 | if (_base_config_dma_addressing(ioc, pdev) != 0) { | |
1274 | printk(MPT2SAS_WARN_FMT "no suitable DMA mask for %s\n", | |
1275 | ioc->name, pci_name(pdev)); | |
1276 | r = -ENODEV; | |
1277 | goto out_fail; | |
1278 | } | |
1279 | ||
1280 | for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) { | |
fc193172 | 1281 | if (pci_resource_flags(pdev, i) & IORESOURCE_IO) { |
635374e7 EM |
1282 | if (pio_sz) |
1283 | continue; | |
6846e75c | 1284 | pio_chip = (u64)pci_resource_start(pdev, i); |
635374e7 EM |
1285 | pio_sz = pci_resource_len(pdev, i); |
1286 | } else { | |
1287 | if (memap_sz) | |
1288 | continue; | |
fc193172 RL |
1289 | /* verify memory resource is valid before using */ |
1290 | if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { | |
1291 | ioc->chip_phys = pci_resource_start(pdev, i); | |
1292 | chip_phys = (u64)ioc->chip_phys; | |
1293 | memap_sz = pci_resource_len(pdev, i); | |
1294 | ioc->chip = ioremap(ioc->chip_phys, memap_sz); | |
1295 | if (ioc->chip == NULL) { | |
1296 | printk(MPT2SAS_ERR_FMT "unable to map " | |
1297 | "adapter memory!\n", ioc->name); | |
1298 | r = -EINVAL; | |
1299 | goto out_fail; | |
1300 | } | |
635374e7 EM |
1301 | } |
1302 | } | |
1303 | } | |
1304 | ||
635374e7 EM |
1305 | _base_mask_interrupts(ioc); |
1306 | r = _base_enable_msix(ioc); | |
1307 | if (r) | |
1308 | goto out_fail; | |
1309 | ||
1310 | printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n", | |
1311 | ioc->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" : | |
1312 | "IO-APIC enabled"), ioc->pci_irq); | |
6846e75c KD |
1313 | printk(MPT2SAS_INFO_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n", |
1314 | ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz); | |
1315 | printk(MPT2SAS_INFO_FMT "ioport(0x%016llx), size(%d)\n", | |
1316 | ioc->name, (unsigned long long)pio_chip, pio_sz); | |
635374e7 | 1317 | |
3cb5469a EM |
1318 | /* Save PCI configuration state for recovery from PCI AER/EEH errors */ |
1319 | pci_save_state(pdev); | |
1320 | ||
635374e7 EM |
1321 | return 0; |
1322 | ||
1323 | out_fail: | |
1324 | if (ioc->chip_phys) | |
1325 | iounmap(ioc->chip); | |
1326 | ioc->chip_phys = 0; | |
1327 | ioc->pci_irq = -1; | |
1328 | pci_release_selected_regions(ioc->pdev, ioc->bars); | |
ef7c80c1 | 1329 | pci_disable_pcie_error_reporting(pdev); |
635374e7 | 1330 | pci_disable_device(pdev); |
635374e7 EM |
1331 | return r; |
1332 | } | |
1333 | ||
635374e7 EM |
1334 | /** |
1335 | * mpt2sas_base_get_msg_frame - obtain request mf pointer | |
1336 | * @ioc: per adapter object | |
1337 | * @smid: system request message index(smid zero is invalid) | |
1338 | * | |
1339 | * Returns virt pointer to message frame. | |
1340 | */ | |
1341 | void * | |
1342 | mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid) | |
1343 | { | |
1344 | return (void *)(ioc->request + (smid * ioc->request_sz)); | |
1345 | } | |
1346 | ||
1347 | /** | |
1348 | * mpt2sas_base_get_sense_buffer - obtain a sense buffer assigned to a mf request | |
1349 | * @ioc: per adapter object | |
1350 | * @smid: system request message index | |
1351 | * | |
1352 | * Returns virt pointer to sense buffer. | |
1353 | */ | |
1354 | void * | |
1355 | mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid) | |
1356 | { | |
1357 | return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE)); | |
1358 | } | |
1359 | ||
1360 | /** | |
1361 | * mpt2sas_base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request | |
1362 | * @ioc: per adapter object | |
1363 | * @smid: system request message index | |
1364 | * | |
ec9472c7 | 1365 | * Returns phys pointer to the low 32bit address of the sense buffer. |
635374e7 | 1366 | */ |
ec9472c7 | 1367 | __le32 |
635374e7 EM |
1368 | mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid) |
1369 | { | |
ec9472c7 KD |
1370 | return cpu_to_le32(ioc->sense_dma + |
1371 | ((smid - 1) * SCSI_SENSE_BUFFERSIZE)); | |
635374e7 EM |
1372 | } |
1373 | ||
1374 | /** | |
1375 | * mpt2sas_base_get_reply_virt_addr - obtain reply frames virt address | |
1376 | * @ioc: per adapter object | |
1377 | * @phys_addr: lower 32 physical addr of the reply | |
1378 | * | |
1379 | * Converts 32bit lower physical addr into a virt address. | |
1380 | */ | |
1381 | void * | |
1382 | mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr) | |
1383 | { | |
1384 | if (!phys_addr) | |
1385 | return NULL; | |
1386 | return ioc->reply + (phys_addr - (u32)ioc->reply_dma); | |
1387 | } | |
1388 | ||
1389 | /** | |
595bb0bd | 1390 | * mpt2sas_base_get_smid - obtain a free smid from internal queue |
635374e7 EM |
1391 | * @ioc: per adapter object |
1392 | * @cb_idx: callback index | |
1393 | * | |
1394 | * Returns smid (zero is invalid) | |
1395 | */ | |
1396 | u16 | |
1397 | mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx) | |
1398 | { | |
1399 | unsigned long flags; | |
1400 | struct request_tracker *request; | |
1401 | u16 smid; | |
1402 | ||
595bb0bd KD |
1403 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
1404 | if (list_empty(&ioc->internal_free_list)) { | |
1405 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
1406 | printk(MPT2SAS_ERR_FMT "%s: smid not available\n", | |
1407 | ioc->name, __func__); | |
1408 | return 0; | |
1409 | } | |
1410 | ||
1411 | request = list_entry(ioc->internal_free_list.next, | |
1412 | struct request_tracker, tracker_list); | |
1413 | request->cb_idx = cb_idx; | |
1414 | smid = request->smid; | |
1415 | list_del(&request->tracker_list); | |
1416 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
1417 | return smid; | |
1418 | } | |
1419 | ||
1420 | /** | |
1421 | * mpt2sas_base_get_smid_scsiio - obtain a free smid from scsiio queue | |
1422 | * @ioc: per adapter object | |
1423 | * @cb_idx: callback index | |
1424 | * @scmd: pointer to scsi command object | |
1425 | * | |
1426 | * Returns smid (zero is invalid) | |
1427 | */ | |
1428 | u16 | |
1429 | mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx, | |
1430 | struct scsi_cmnd *scmd) | |
1431 | { | |
1432 | unsigned long flags; | |
1433 | struct request_tracker *request; | |
1434 | u16 smid; | |
1435 | ||
635374e7 EM |
1436 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
1437 | if (list_empty(&ioc->free_list)) { | |
1438 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
1439 | printk(MPT2SAS_ERR_FMT "%s: smid not available\n", | |
1440 | ioc->name, __func__); | |
1441 | return 0; | |
1442 | } | |
1443 | ||
1444 | request = list_entry(ioc->free_list.next, | |
1445 | struct request_tracker, tracker_list); | |
595bb0bd KD |
1446 | request->scmd = scmd; |
1447 | request->cb_idx = cb_idx; | |
1448 | smid = request->smid; | |
1449 | list_del(&request->tracker_list); | |
1450 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
1451 | return smid; | |
1452 | } | |
1453 | ||
1454 | /** | |
1455 | * mpt2sas_base_get_smid_hpr - obtain a free smid from hi-priority queue | |
1456 | * @ioc: per adapter object | |
1457 | * @cb_idx: callback index | |
1458 | * | |
1459 | * Returns smid (zero is invalid) | |
1460 | */ | |
1461 | u16 | |
1462 | mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx) | |
1463 | { | |
1464 | unsigned long flags; | |
1465 | struct request_tracker *request; | |
1466 | u16 smid; | |
1467 | ||
1468 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); | |
1469 | if (list_empty(&ioc->hpr_free_list)) { | |
1470 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
1471 | return 0; | |
1472 | } | |
1473 | ||
1474 | request = list_entry(ioc->hpr_free_list.next, | |
1475 | struct request_tracker, tracker_list); | |
635374e7 EM |
1476 | request->cb_idx = cb_idx; |
1477 | smid = request->smid; | |
1478 | list_del(&request->tracker_list); | |
1479 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
1480 | return smid; | |
1481 | } | |
1482 | ||
1483 | ||
1484 | /** | |
1485 | * mpt2sas_base_free_smid - put smid back on free_list | |
1486 | * @ioc: per adapter object | |
1487 | * @smid: system request message index | |
1488 | * | |
1489 | * Return nothing. | |
1490 | */ | |
1491 | void | |
1492 | mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid) | |
1493 | { | |
1494 | unsigned long flags; | |
595bb0bd | 1495 | int i; |
35f805b5 | 1496 | struct chain_tracker *chain_req, *next; |
635374e7 EM |
1497 | |
1498 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); | |
595bb0bd KD |
1499 | if (smid >= ioc->hi_priority_smid) { |
1500 | if (smid < ioc->internal_smid) { | |
1501 | /* hi-priority */ | |
1502 | i = smid - ioc->hi_priority_smid; | |
1503 | ioc->hpr_lookup[i].cb_idx = 0xFF; | |
1504 | list_add_tail(&ioc->hpr_lookup[i].tracker_list, | |
1505 | &ioc->hpr_free_list); | |
1506 | } else { | |
1507 | /* internal queue */ | |
1508 | i = smid - ioc->internal_smid; | |
1509 | ioc->internal_lookup[i].cb_idx = 0xFF; | |
1510 | list_add_tail(&ioc->internal_lookup[i].tracker_list, | |
1511 | &ioc->internal_free_list); | |
1512 | } | |
1513 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
1514 | return; | |
1515 | } | |
1516 | ||
1517 | /* scsiio queue */ | |
1518 | i = smid - 1; | |
35f805b5 KD |
1519 | if (!list_empty(&ioc->scsi_lookup[i].chain_list)) { |
1520 | list_for_each_entry_safe(chain_req, next, | |
1521 | &ioc->scsi_lookup[i].chain_list, tracker_list) { | |
1522 | list_del_init(&chain_req->tracker_list); | |
1523 | list_add_tail(&chain_req->tracker_list, | |
1524 | &ioc->free_chain_list); | |
1525 | } | |
1526 | } | |
595bb0bd KD |
1527 | ioc->scsi_lookup[i].cb_idx = 0xFF; |
1528 | ioc->scsi_lookup[i].scmd = NULL; | |
1529 | list_add_tail(&ioc->scsi_lookup[i].tracker_list, | |
635374e7 EM |
1530 | &ioc->free_list); |
1531 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
1532 | ||
1533 | /* | |
1534 | * See _wait_for_commands_to_complete() call with regards to this code. | |
1535 | */ | |
1536 | if (ioc->shost_recovery && ioc->pending_io_count) { | |
1537 | if (ioc->pending_io_count == 1) | |
1538 | wake_up(&ioc->reset_wq); | |
1539 | ioc->pending_io_count--; | |
1540 | } | |
1541 | } | |
1542 | ||
1543 | /** | |
1544 | * _base_writeq - 64 bit write to MMIO | |
1545 | * @ioc: per adapter object | |
1546 | * @b: data payload | |
1547 | * @addr: address in MMIO space | |
1548 | * @writeq_lock: spin lock | |
1549 | * | |
1550 | * Glue for handling an atomic 64 bit word to MMIO. This special handling takes | |
1551 | * care of 32 bit environment where its not quarenteed to send the entire word | |
1552 | * in one transfer. | |
1553 | */ | |
1554 | #ifndef writeq | |
1555 | static inline void _base_writeq(__u64 b, volatile void __iomem *addr, | |
1556 | spinlock_t *writeq_lock) | |
1557 | { | |
1558 | unsigned long flags; | |
1559 | __u64 data_out = cpu_to_le64(b); | |
1560 | ||
1561 | spin_lock_irqsave(writeq_lock, flags); | |
1562 | writel((u32)(data_out), addr); | |
1563 | writel((u32)(data_out >> 32), (addr + 4)); | |
1564 | spin_unlock_irqrestore(writeq_lock, flags); | |
1565 | } | |
1566 | #else | |
1567 | static inline void _base_writeq(__u64 b, volatile void __iomem *addr, | |
1568 | spinlock_t *writeq_lock) | |
1569 | { | |
1570 | writeq(cpu_to_le64(b), addr); | |
1571 | } | |
1572 | #endif | |
1573 | ||
1574 | /** | |
1575 | * mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware | |
1576 | * @ioc: per adapter object | |
1577 | * @smid: system request message index | |
635374e7 EM |
1578 | * @handle: device handle |
1579 | * | |
1580 | * Return nothing. | |
1581 | */ | |
1582 | void | |
7b936b02 | 1583 | mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle) |
635374e7 EM |
1584 | { |
1585 | Mpi2RequestDescriptorUnion_t descriptor; | |
1586 | u64 *request = (u64 *)&descriptor; | |
1587 | ||
1588 | ||
1589 | descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; | |
7b936b02 | 1590 | descriptor.SCSIIO.MSIxIndex = 0; /* TODO */ |
635374e7 EM |
1591 | descriptor.SCSIIO.SMID = cpu_to_le16(smid); |
1592 | descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); | |
1593 | descriptor.SCSIIO.LMID = 0; | |
1594 | _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, | |
1595 | &ioc->scsi_lookup_lock); | |
1596 | } | |
1597 | ||
1598 | ||
1599 | /** | |
1600 | * mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware | |
1601 | * @ioc: per adapter object | |
1602 | * @smid: system request message index | |
635374e7 EM |
1603 | * |
1604 | * Return nothing. | |
1605 | */ | |
1606 | void | |
7b936b02 | 1607 | mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid) |
635374e7 EM |
1608 | { |
1609 | Mpi2RequestDescriptorUnion_t descriptor; | |
1610 | u64 *request = (u64 *)&descriptor; | |
1611 | ||
1612 | descriptor.HighPriority.RequestFlags = | |
1613 | MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY; | |
7b936b02 | 1614 | descriptor.HighPriority.MSIxIndex = 0; /* TODO */ |
635374e7 EM |
1615 | descriptor.HighPriority.SMID = cpu_to_le16(smid); |
1616 | descriptor.HighPriority.LMID = 0; | |
1617 | descriptor.HighPriority.Reserved1 = 0; | |
1618 | _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, | |
1619 | &ioc->scsi_lookup_lock); | |
1620 | } | |
1621 | ||
1622 | /** | |
1623 | * mpt2sas_base_put_smid_default - Default, primarily used for config pages | |
1624 | * @ioc: per adapter object | |
1625 | * @smid: system request message index | |
635374e7 EM |
1626 | * |
1627 | * Return nothing. | |
1628 | */ | |
1629 | void | |
7b936b02 | 1630 | mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid) |
635374e7 EM |
1631 | { |
1632 | Mpi2RequestDescriptorUnion_t descriptor; | |
1633 | u64 *request = (u64 *)&descriptor; | |
1634 | ||
1635 | descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; | |
7b936b02 | 1636 | descriptor.Default.MSIxIndex = 0; /* TODO */ |
635374e7 EM |
1637 | descriptor.Default.SMID = cpu_to_le16(smid); |
1638 | descriptor.Default.LMID = 0; | |
1639 | descriptor.Default.DescriptorTypeDependent = 0; | |
1640 | _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, | |
1641 | &ioc->scsi_lookup_lock); | |
1642 | } | |
1643 | ||
1644 | /** | |
1645 | * mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware | |
1646 | * @ioc: per adapter object | |
1647 | * @smid: system request message index | |
635374e7 EM |
1648 | * @io_index: value used to track the IO |
1649 | * | |
1650 | * Return nothing. | |
1651 | */ | |
1652 | void | |
1653 | mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid, | |
7b936b02 | 1654 | u16 io_index) |
635374e7 EM |
1655 | { |
1656 | Mpi2RequestDescriptorUnion_t descriptor; | |
1657 | u64 *request = (u64 *)&descriptor; | |
1658 | ||
1659 | descriptor.SCSITarget.RequestFlags = | |
1660 | MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET; | |
7b936b02 | 1661 | descriptor.SCSITarget.MSIxIndex = 0; /* TODO */ |
635374e7 EM |
1662 | descriptor.SCSITarget.SMID = cpu_to_le16(smid); |
1663 | descriptor.SCSITarget.LMID = 0; | |
1664 | descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index); | |
1665 | _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, | |
1666 | &ioc->scsi_lookup_lock); | |
1667 | } | |
1668 | ||
f0f9cc1f EM |
1669 | /** |
1670 | * _base_display_dell_branding - Disply branding string | |
1671 | * @ioc: per adapter object | |
1672 | * | |
1673 | * Return nothing. | |
1674 | */ | |
1675 | static void | |
1676 | _base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc) | |
1677 | { | |
1678 | char dell_branding[MPT2SAS_DELL_BRANDING_SIZE]; | |
1679 | ||
1680 | if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL) | |
1681 | return; | |
1682 | ||
1683 | memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE); | |
1684 | switch (ioc->pdev->subsystem_device) { | |
1685 | case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID: | |
1686 | strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING, | |
1687 | MPT2SAS_DELL_BRANDING_SIZE - 1); | |
1688 | break; | |
1689 | case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID: | |
1690 | strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING, | |
1691 | MPT2SAS_DELL_BRANDING_SIZE - 1); | |
1692 | break; | |
1693 | case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID: | |
1694 | strncpy(dell_branding, | |
1695 | MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING, | |
1696 | MPT2SAS_DELL_BRANDING_SIZE - 1); | |
1697 | break; | |
1698 | case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID: | |
1699 | strncpy(dell_branding, | |
1700 | MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING, | |
1701 | MPT2SAS_DELL_BRANDING_SIZE - 1); | |
1702 | break; | |
1703 | case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID: | |
1704 | strncpy(dell_branding, | |
1705 | MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING, | |
1706 | MPT2SAS_DELL_BRANDING_SIZE - 1); | |
1707 | break; | |
1708 | case MPT2SAS_DELL_PERC_H200_SSDID: | |
1709 | strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING, | |
1710 | MPT2SAS_DELL_BRANDING_SIZE - 1); | |
1711 | break; | |
1712 | case MPT2SAS_DELL_6GBPS_SAS_SSDID: | |
1713 | strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING, | |
1714 | MPT2SAS_DELL_BRANDING_SIZE - 1); | |
1715 | break; | |
1716 | default: | |
1717 | sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device); | |
1718 | break; | |
1719 | } | |
1720 | ||
1721 | printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X)," | |
1722 | " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding, | |
1723 | ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor, | |
1724 | ioc->pdev->subsystem_device); | |
1725 | } | |
1726 | ||
635374e7 EM |
1727 | /** |
1728 | * _base_display_ioc_capabilities - Disply IOC's capabilities. | |
1729 | * @ioc: per adapter object | |
1730 | * | |
1731 | * Return nothing. | |
1732 | */ | |
1733 | static void | |
1734 | _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) | |
1735 | { | |
1736 | int i = 0; | |
1737 | char desc[16]; | |
1738 | u8 revision; | |
1739 | u32 iounit_pg1_flags; | |
1740 | ||
1741 | pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision); | |
1742 | strncpy(desc, ioc->manu_pg0.ChipName, 16); | |
1743 | printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), " | |
1744 | "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n", | |
1745 | ioc->name, desc, | |
1746 | (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, | |
1747 | (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, | |
1748 | (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, | |
1749 | ioc->facts.FWVersion.Word & 0x000000FF, | |
1750 | revision, | |
1751 | (ioc->bios_pg3.BiosVersion & 0xFF000000) >> 24, | |
1752 | (ioc->bios_pg3.BiosVersion & 0x00FF0000) >> 16, | |
1753 | (ioc->bios_pg3.BiosVersion & 0x0000FF00) >> 8, | |
1754 | ioc->bios_pg3.BiosVersion & 0x000000FF); | |
1755 | ||
ed79f128 KD |
1756 | _base_display_dell_branding(ioc); |
1757 | ||
635374e7 EM |
1758 | printk(MPT2SAS_INFO_FMT "Protocol=(", ioc->name); |
1759 | ||
1760 | if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) { | |
1761 | printk("Initiator"); | |
1762 | i++; | |
1763 | } | |
1764 | ||
1765 | if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) { | |
1766 | printk("%sTarget", i ? "," : ""); | |
1767 | i++; | |
1768 | } | |
1769 | ||
1770 | i = 0; | |
1771 | printk("), "); | |
1772 | printk("Capabilities=("); | |
1773 | ||
1774 | if (ioc->facts.IOCCapabilities & | |
1775 | MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) { | |
1776 | printk("Raid"); | |
1777 | i++; | |
1778 | } | |
1779 | ||
1780 | if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) { | |
1781 | printk("%sTLR", i ? "," : ""); | |
1782 | i++; | |
1783 | } | |
1784 | ||
1785 | if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) { | |
1786 | printk("%sMulticast", i ? "," : ""); | |
1787 | i++; | |
1788 | } | |
1789 | ||
1790 | if (ioc->facts.IOCCapabilities & | |
1791 | MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) { | |
1792 | printk("%sBIDI Target", i ? "," : ""); | |
1793 | i++; | |
1794 | } | |
1795 | ||
1796 | if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) { | |
1797 | printk("%sEEDP", i ? "," : ""); | |
1798 | i++; | |
1799 | } | |
1800 | ||
1801 | if (ioc->facts.IOCCapabilities & | |
1802 | MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) { | |
1803 | printk("%sSnapshot Buffer", i ? "," : ""); | |
1804 | i++; | |
1805 | } | |
1806 | ||
1807 | if (ioc->facts.IOCCapabilities & | |
1808 | MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) { | |
1809 | printk("%sDiag Trace Buffer", i ? "," : ""); | |
1810 | i++; | |
1811 | } | |
1812 | ||
1b01fe3a KD |
1813 | if (ioc->facts.IOCCapabilities & |
1814 | MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) { | |
1815 | printk(KERN_INFO "%sDiag Extended Buffer", i ? "," : ""); | |
1816 | i++; | |
1817 | } | |
1818 | ||
635374e7 EM |
1819 | if (ioc->facts.IOCCapabilities & |
1820 | MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) { | |
1821 | printk("%sTask Set Full", i ? "," : ""); | |
1822 | i++; | |
1823 | } | |
1824 | ||
1825 | iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); | |
1826 | if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) { | |
1827 | printk("%sNCQ", i ? "," : ""); | |
1828 | i++; | |
1829 | } | |
1830 | ||
1831 | printk(")\n"); | |
1832 | } | |
1833 | ||
6cb8ef57 KD |
1834 | /** |
1835 | * _base_update_missing_delay - change the missing delay timers | |
1836 | * @ioc: per adapter object | |
1837 | * @device_missing_delay: amount of time till device is reported missing | |
1838 | * @io_missing_delay: interval IO is returned when there is a missing device | |
1839 | * | |
1840 | * Return nothing. | |
1841 | * | |
1842 | * Passed on the command line, this function will modify the device missing | |
1843 | * delay, as well as the io missing delay. This should be called at driver | |
1844 | * load time. | |
1845 | */ | |
1846 | static void | |
1847 | _base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc, | |
1848 | u16 device_missing_delay, u8 io_missing_delay) | |
1849 | { | |
1850 | u16 dmd, dmd_new, dmd_orignal; | |
1851 | u8 io_missing_delay_original; | |
1852 | u16 sz; | |
1853 | Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; | |
1854 | Mpi2ConfigReply_t mpi_reply; | |
1855 | u8 num_phys = 0; | |
1856 | u16 ioc_status; | |
1857 | ||
1858 | mpt2sas_config_get_number_hba_phys(ioc, &num_phys); | |
1859 | if (!num_phys) | |
1860 | return; | |
1861 | ||
1862 | sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys * | |
1863 | sizeof(Mpi2SasIOUnit1PhyData_t)); | |
1864 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | |
1865 | if (!sas_iounit_pg1) { | |
1866 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
1867 | ioc->name, __FILE__, __LINE__, __func__); | |
1868 | goto out; | |
1869 | } | |
1870 | if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, | |
1871 | sas_iounit_pg1, sz))) { | |
1872 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
1873 | ioc->name, __FILE__, __LINE__, __func__); | |
1874 | goto out; | |
1875 | } | |
1876 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
1877 | MPI2_IOCSTATUS_MASK; | |
1878 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
1879 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
1880 | ioc->name, __FILE__, __LINE__, __func__); | |
1881 | goto out; | |
1882 | } | |
1883 | ||
1884 | /* device missing delay */ | |
1885 | dmd = sas_iounit_pg1->ReportDeviceMissingDelay; | |
1886 | if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) | |
1887 | dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; | |
1888 | else | |
1889 | dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; | |
1890 | dmd_orignal = dmd; | |
1891 | if (device_missing_delay > 0x7F) { | |
1892 | dmd = (device_missing_delay > 0x7F0) ? 0x7F0 : | |
1893 | device_missing_delay; | |
1894 | dmd = dmd / 16; | |
1895 | dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16; | |
1896 | } else | |
1897 | dmd = device_missing_delay; | |
1898 | sas_iounit_pg1->ReportDeviceMissingDelay = dmd; | |
1899 | ||
1900 | /* io missing delay */ | |
1901 | io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay; | |
1902 | sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay; | |
1903 | ||
1904 | if (!mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, | |
1905 | sz)) { | |
1906 | if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) | |
1907 | dmd_new = (dmd & | |
1908 | MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; | |
1909 | else | |
1910 | dmd_new = | |
1911 | dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; | |
1912 | printk(MPT2SAS_INFO_FMT "device_missing_delay: old(%d), " | |
1913 | "new(%d)\n", ioc->name, dmd_orignal, dmd_new); | |
1914 | printk(MPT2SAS_INFO_FMT "ioc_missing_delay: old(%d), " | |
1915 | "new(%d)\n", ioc->name, io_missing_delay_original, | |
1916 | io_missing_delay); | |
1917 | ioc->device_missing_delay = dmd_new; | |
1918 | ioc->io_missing_delay = io_missing_delay; | |
1919 | } | |
1920 | ||
1921 | out: | |
1922 | kfree(sas_iounit_pg1); | |
1923 | } | |
1924 | ||
635374e7 EM |
1925 | /** |
1926 | * _base_static_config_pages - static start of day config pages | |
1927 | * @ioc: per adapter object | |
1928 | * | |
1929 | * Return nothing. | |
1930 | */ | |
1931 | static void | |
1932 | _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc) | |
1933 | { | |
1934 | Mpi2ConfigReply_t mpi_reply; | |
1935 | u32 iounit_pg1_flags; | |
1936 | ||
1937 | mpt2sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0); | |
ed79f128 KD |
1938 | if (ioc->ir_firmware) |
1939 | mpt2sas_config_get_manufacturing_pg10(ioc, &mpi_reply, | |
1940 | &ioc->manu_pg10); | |
635374e7 EM |
1941 | mpt2sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); |
1942 | mpt2sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); | |
1943 | mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); | |
1944 | mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); | |
1945 | mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); | |
1946 | _base_display_ioc_capabilities(ioc); | |
1947 | ||
1948 | /* | |
1949 | * Enable task_set_full handling in iounit_pg1 when the | |
1950 | * facts capabilities indicate that its supported. | |
1951 | */ | |
1952 | iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); | |
1953 | if ((ioc->facts.IOCCapabilities & | |
1954 | MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING)) | |
1955 | iounit_pg1_flags &= | |
1956 | ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; | |
1957 | else | |
1958 | iounit_pg1_flags |= | |
1959 | MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; | |
1960 | ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags); | |
5b768581 | 1961 | mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); |
6cb8ef57 | 1962 | |
635374e7 EM |
1963 | } |
1964 | ||
1965 | /** | |
1966 | * _base_release_memory_pools - release memory | |
1967 | * @ioc: per adapter object | |
1968 | * | |
1969 | * Free memory allocated from _base_allocate_memory_pools. | |
1970 | * | |
1971 | * Return nothing. | |
1972 | */ | |
1973 | static void | |
1974 | _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc) | |
1975 | { | |
35f805b5 KD |
1976 | int i; |
1977 | ||
eabb08ad | 1978 | dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
1979 | __func__)); |
1980 | ||
1981 | if (ioc->request) { | |
1982 | pci_free_consistent(ioc->pdev, ioc->request_dma_sz, | |
1983 | ioc->request, ioc->request_dma); | |
1984 | dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "request_pool(0x%p)" | |
1985 | ": free\n", ioc->name, ioc->request)); | |
1986 | ioc->request = NULL; | |
1987 | } | |
1988 | ||
1989 | if (ioc->sense) { | |
1990 | pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma); | |
1991 | if (ioc->sense_dma_pool) | |
1992 | pci_pool_destroy(ioc->sense_dma_pool); | |
1993 | dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_pool(0x%p)" | |
1994 | ": free\n", ioc->name, ioc->sense)); | |
1995 | ioc->sense = NULL; | |
1996 | } | |
1997 | ||
1998 | if (ioc->reply) { | |
1999 | pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma); | |
2000 | if (ioc->reply_dma_pool) | |
2001 | pci_pool_destroy(ioc->reply_dma_pool); | |
2002 | dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_pool(0x%p)" | |
2003 | ": free\n", ioc->name, ioc->reply)); | |
2004 | ioc->reply = NULL; | |
2005 | } | |
2006 | ||
2007 | if (ioc->reply_free) { | |
2008 | pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free, | |
2009 | ioc->reply_free_dma); | |
2010 | if (ioc->reply_free_dma_pool) | |
2011 | pci_pool_destroy(ioc->reply_free_dma_pool); | |
2012 | dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_pool" | |
2013 | "(0x%p): free\n", ioc->name, ioc->reply_free)); | |
2014 | ioc->reply_free = NULL; | |
2015 | } | |
2016 | ||
2017 | if (ioc->reply_post_free) { | |
2018 | pci_pool_free(ioc->reply_post_free_dma_pool, | |
2019 | ioc->reply_post_free, ioc->reply_post_free_dma); | |
2020 | if (ioc->reply_post_free_dma_pool) | |
2021 | pci_pool_destroy(ioc->reply_post_free_dma_pool); | |
2022 | dexitprintk(ioc, printk(MPT2SAS_INFO_FMT | |
2023 | "reply_post_free_pool(0x%p): free\n", ioc->name, | |
2024 | ioc->reply_post_free)); | |
2025 | ioc->reply_post_free = NULL; | |
2026 | } | |
2027 | ||
2028 | if (ioc->config_page) { | |
2029 | dexitprintk(ioc, printk(MPT2SAS_INFO_FMT | |
2030 | "config_page(0x%p): free\n", ioc->name, | |
2031 | ioc->config_page)); | |
2032 | pci_free_consistent(ioc->pdev, ioc->config_page_sz, | |
2033 | ioc->config_page, ioc->config_page_dma); | |
2034 | } | |
2035 | ||
66a67936 KD |
2036 | if (ioc->scsi_lookup) { |
2037 | free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages); | |
2038 | ioc->scsi_lookup = NULL; | |
2039 | } | |
595bb0bd KD |
2040 | kfree(ioc->hpr_lookup); |
2041 | kfree(ioc->internal_lookup); | |
35f805b5 KD |
2042 | if (ioc->chain_lookup) { |
2043 | for (i = 0; i < ioc->chain_depth; i++) { | |
2044 | if (ioc->chain_lookup[i].chain_buffer) | |
2045 | pci_pool_free(ioc->chain_dma_pool, | |
2046 | ioc->chain_lookup[i].chain_buffer, | |
2047 | ioc->chain_lookup[i].chain_buffer_dma); | |
2048 | } | |
2049 | if (ioc->chain_dma_pool) | |
2050 | pci_pool_destroy(ioc->chain_dma_pool); | |
2051 | } | |
2052 | if (ioc->chain_lookup) { | |
2053 | free_pages((ulong)ioc->chain_lookup, ioc->chain_pages); | |
2054 | ioc->chain_lookup = NULL; | |
2055 | } | |
635374e7 EM |
2056 | } |
2057 | ||
2058 | ||
2059 | /** | |
2060 | * _base_allocate_memory_pools - allocate start of day memory pools | |
2061 | * @ioc: per adapter object | |
2062 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
2063 | * | |
2064 | * Returns 0 success, anything else error | |
2065 | */ | |
2066 | static int | |
2067 | _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) | |
2068 | { | |
2069 | Mpi2IOCFactsReply_t *facts; | |
2070 | u32 queue_size, queue_diff; | |
2071 | u16 max_sge_elements; | |
2072 | u16 num_of_reply_frames; | |
2073 | u16 chains_needed_per_io; | |
2074 | u32 sz, total_sz; | |
635374e7 EM |
2075 | u32 retry_sz; |
2076 | u16 max_request_credit; | |
35f805b5 | 2077 | int i; |
635374e7 | 2078 | |
eabb08ad | 2079 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
2080 | __func__)); |
2081 | ||
2082 | retry_sz = 0; | |
2083 | facts = &ioc->facts; | |
2084 | ||
2085 | /* command line tunables for max sgl entries */ | |
2086 | if (max_sgl_entries != -1) { | |
2087 | ioc->shost->sg_tablesize = (max_sgl_entries < | |
2088 | MPT2SAS_SG_DEPTH) ? max_sgl_entries : | |
2089 | MPT2SAS_SG_DEPTH; | |
2090 | } else { | |
2091 | ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH; | |
2092 | } | |
2093 | ||
2094 | /* command line tunables for max controller queue depth */ | |
35f805b5 | 2095 | if (max_queue_depth != -1) |
635374e7 EM |
2096 | max_request_credit = (max_queue_depth < facts->RequestCredit) |
2097 | ? max_queue_depth : facts->RequestCredit; | |
35f805b5 KD |
2098 | else |
2099 | max_request_credit = facts->RequestCredit; | |
595bb0bd KD |
2100 | |
2101 | ioc->hba_queue_depth = max_request_credit; | |
2102 | ioc->hi_priority_depth = facts->HighPriorityCredit; | |
2103 | ioc->internal_depth = ioc->hi_priority_depth + 5; | |
635374e7 EM |
2104 | |
2105 | /* request frame size */ | |
2106 | ioc->request_sz = facts->IOCRequestFrameSize * 4; | |
2107 | ||
2108 | /* reply frame size */ | |
2109 | ioc->reply_sz = facts->ReplyFrameSize * 4; | |
2110 | ||
2111 | retry_allocation: | |
2112 | total_sz = 0; | |
2113 | /* calculate number of sg elements left over in the 1st frame */ | |
2114 | max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) - | |
2115 | sizeof(Mpi2SGEIOUnion_t)) + ioc->sge_size); | |
2116 | ioc->max_sges_in_main_message = max_sge_elements/ioc->sge_size; | |
2117 | ||
2118 | /* now do the same for a chain buffer */ | |
2119 | max_sge_elements = ioc->request_sz - ioc->sge_size; | |
2120 | ioc->max_sges_in_chain_message = max_sge_elements/ioc->sge_size; | |
2121 | ||
2122 | ioc->chain_offset_value_for_main_message = | |
2123 | ((sizeof(Mpi2SCSIIORequest_t) - sizeof(Mpi2SGEIOUnion_t)) + | |
2124 | (ioc->max_sges_in_chain_message * ioc->sge_size)) / 4; | |
2125 | ||
2126 | /* | |
2127 | * MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE | |
2128 | */ | |
2129 | chains_needed_per_io = ((ioc->shost->sg_tablesize - | |
2130 | ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message) | |
2131 | + 1; | |
2132 | if (chains_needed_per_io > facts->MaxChainDepth) { | |
2133 | chains_needed_per_io = facts->MaxChainDepth; | |
2134 | ioc->shost->sg_tablesize = min_t(u16, | |
2135 | ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message | |
2136 | * chains_needed_per_io), ioc->shost->sg_tablesize); | |
2137 | } | |
2138 | ioc->chains_needed_per_io = chains_needed_per_io; | |
2139 | ||
2140 | /* reply free queue sizing - taking into account for events */ | |
595bb0bd | 2141 | num_of_reply_frames = ioc->hba_queue_depth + 32; |
635374e7 EM |
2142 | |
2143 | /* number of replies frames can't be a multiple of 16 */ | |
2144 | /* decrease number of reply frames by 1 */ | |
2145 | if (!(num_of_reply_frames % 16)) | |
2146 | num_of_reply_frames--; | |
2147 | ||
2148 | /* calculate number of reply free queue entries | |
2149 | * (must be multiple of 16) | |
2150 | */ | |
2151 | ||
2152 | /* (we know reply_free_queue_depth is not a multiple of 16) */ | |
2153 | queue_size = num_of_reply_frames; | |
2154 | queue_size += 16 - (queue_size % 16); | |
2155 | ioc->reply_free_queue_depth = queue_size; | |
2156 | ||
2157 | /* reply descriptor post queue sizing */ | |
2158 | /* this size should be the number of request frames + number of reply | |
2159 | * frames | |
2160 | */ | |
2161 | ||
595bb0bd | 2162 | queue_size = ioc->hba_queue_depth + num_of_reply_frames + 1; |
635374e7 EM |
2163 | /* round up to 16 byte boundary */ |
2164 | if (queue_size % 16) | |
2165 | queue_size += 16 - (queue_size % 16); | |
2166 | ||
2167 | /* check against IOC maximum reply post queue depth */ | |
2168 | if (queue_size > facts->MaxReplyDescriptorPostQueueDepth) { | |
2169 | queue_diff = queue_size - | |
2170 | facts->MaxReplyDescriptorPostQueueDepth; | |
2171 | ||
2172 | /* round queue_diff up to multiple of 16 */ | |
2173 | if (queue_diff % 16) | |
2174 | queue_diff += 16 - (queue_diff % 16); | |
2175 | ||
595bb0bd | 2176 | /* adjust hba_queue_depth, reply_free_queue_depth, |
635374e7 EM |
2177 | * and queue_size |
2178 | */ | |
595bb0bd | 2179 | ioc->hba_queue_depth -= queue_diff; |
635374e7 EM |
2180 | ioc->reply_free_queue_depth -= queue_diff; |
2181 | queue_size -= queue_diff; | |
2182 | } | |
2183 | ioc->reply_post_queue_depth = queue_size; | |
2184 | ||
635374e7 EM |
2185 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: " |
2186 | "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), " | |
2187 | "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message, | |
2188 | ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize, | |
2189 | ioc->chains_needed_per_io)); | |
2190 | ||
595bb0bd KD |
2191 | ioc->scsiio_depth = ioc->hba_queue_depth - |
2192 | ioc->hi_priority_depth - ioc->internal_depth; | |
2193 | ||
2194 | /* set the scsi host can_queue depth | |
2195 | * with some internal commands that could be outstanding | |
2196 | */ | |
2197 | ioc->shost->can_queue = ioc->scsiio_depth - (2); | |
2198 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: " | |
2199 | "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue)); | |
2200 | ||
635374e7 EM |
2201 | /* contiguous pool for request and chains, 16 byte align, one extra " |
2202 | * "frame for smid=0 | |
2203 | */ | |
595bb0bd | 2204 | ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth; |
35f805b5 | 2205 | sz = ((ioc->scsiio_depth + 1) * ioc->request_sz); |
595bb0bd KD |
2206 | |
2207 | /* hi-priority queue */ | |
2208 | sz += (ioc->hi_priority_depth * ioc->request_sz); | |
2209 | ||
2210 | /* internal queue */ | |
2211 | sz += (ioc->internal_depth * ioc->request_sz); | |
635374e7 EM |
2212 | |
2213 | ioc->request_dma_sz = sz; | |
2214 | ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma); | |
2215 | if (!ioc->request) { | |
2216 | printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent " | |
595bb0bd KD |
2217 | "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), " |
2218 | "total(%d kB)\n", ioc->name, ioc->hba_queue_depth, | |
635374e7 | 2219 | ioc->chains_needed_per_io, ioc->request_sz, sz/1024); |
595bb0bd | 2220 | if (ioc->scsiio_depth < MPT2SAS_SAS_QUEUE_DEPTH) |
635374e7 EM |
2221 | goto out; |
2222 | retry_sz += 64; | |
595bb0bd | 2223 | ioc->hba_queue_depth = max_request_credit - retry_sz; |
635374e7 EM |
2224 | goto retry_allocation; |
2225 | } | |
2226 | ||
2227 | if (retry_sz) | |
2228 | printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent " | |
595bb0bd KD |
2229 | "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), " |
2230 | "total(%d kb)\n", ioc->name, ioc->hba_queue_depth, | |
635374e7 EM |
2231 | ioc->chains_needed_per_io, ioc->request_sz, sz/1024); |
2232 | ||
595bb0bd KD |
2233 | |
2234 | /* hi-priority queue */ | |
2235 | ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) * | |
635374e7 | 2236 | ioc->request_sz); |
595bb0bd KD |
2237 | ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) * |
2238 | ioc->request_sz); | |
2239 | ||
2240 | /* internal queue */ | |
2241 | ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth * | |
635374e7 | 2242 | ioc->request_sz); |
595bb0bd KD |
2243 | ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth * |
2244 | ioc->request_sz); | |
2245 | ||
595bb0bd | 2246 | |
635374e7 EM |
2247 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): " |
2248 | "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, | |
595bb0bd KD |
2249 | ioc->request, ioc->hba_queue_depth, ioc->request_sz, |
2250 | (ioc->hba_queue_depth * ioc->request_sz)/1024)); | |
635374e7 EM |
2251 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool: dma(0x%llx)\n", |
2252 | ioc->name, (unsigned long long) ioc->request_dma)); | |
2253 | total_sz += sz; | |
2254 | ||
89009fbb KD |
2255 | sz = ioc->scsiio_depth * sizeof(struct request_tracker); |
2256 | ioc->scsi_lookup_pages = get_order(sz); | |
2257 | ioc->scsi_lookup = (struct request_tracker *)__get_free_pages( | |
2258 | GFP_KERNEL, ioc->scsi_lookup_pages); | |
635374e7 | 2259 | if (!ioc->scsi_lookup) { |
89009fbb KD |
2260 | printk(MPT2SAS_ERR_FMT "scsi_lookup: get_free_pages failed, " |
2261 | "sz(%d)\n", ioc->name, (int)sz); | |
635374e7 EM |
2262 | goto out; |
2263 | } | |
2264 | ||
595bb0bd KD |
2265 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsiio(0x%p): " |
2266 | "depth(%d)\n", ioc->name, ioc->request, | |
2267 | ioc->scsiio_depth)); | |
2268 | ||
35f805b5 KD |
2269 | /* loop till the allocation succeeds */ |
2270 | do { | |
2271 | sz = ioc->chain_depth * sizeof(struct chain_tracker); | |
2272 | ioc->chain_pages = get_order(sz); | |
2273 | ioc->chain_lookup = (struct chain_tracker *)__get_free_pages( | |
2274 | GFP_KERNEL, ioc->chain_pages); | |
2275 | if (ioc->chain_lookup == NULL) | |
2276 | ioc->chain_depth -= 100; | |
2277 | } while (ioc->chain_lookup == NULL); | |
2278 | ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev, | |
2279 | ioc->request_sz, 16, 0); | |
2280 | if (!ioc->chain_dma_pool) { | |
2281 | printk(MPT2SAS_ERR_FMT "chain_dma_pool: pci_pool_create " | |
2282 | "failed\n", ioc->name); | |
2283 | goto out; | |
2284 | } | |
2285 | for (i = 0; i < ioc->chain_depth; i++) { | |
2286 | ioc->chain_lookup[i].chain_buffer = pci_pool_alloc( | |
2287 | ioc->chain_dma_pool , GFP_KERNEL, | |
2288 | &ioc->chain_lookup[i].chain_buffer_dma); | |
2289 | if (!ioc->chain_lookup[i].chain_buffer) { | |
2290 | ioc->chain_depth = i; | |
2291 | goto chain_done; | |
2292 | } | |
2293 | total_sz += ioc->request_sz; | |
2294 | } | |
2295 | chain_done: | |
2296 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool depth" | |
2297 | "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, | |
2298 | ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth * | |
2299 | ioc->request_sz))/1024)); | |
2300 | ||
595bb0bd KD |
2301 | /* initialize hi-priority queue smid's */ |
2302 | ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth, | |
2303 | sizeof(struct request_tracker), GFP_KERNEL); | |
2304 | if (!ioc->hpr_lookup) { | |
2305 | printk(MPT2SAS_ERR_FMT "hpr_lookup: kcalloc failed\n", | |
2306 | ioc->name); | |
2307 | goto out; | |
2308 | } | |
2309 | ioc->hi_priority_smid = ioc->scsiio_depth + 1; | |
2310 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hi_priority(0x%p): " | |
2311 | "depth(%d), start smid(%d)\n", ioc->name, ioc->hi_priority, | |
2312 | ioc->hi_priority_depth, ioc->hi_priority_smid)); | |
2313 | ||
2314 | /* initialize internal queue smid's */ | |
2315 | ioc->internal_lookup = kcalloc(ioc->internal_depth, | |
2316 | sizeof(struct request_tracker), GFP_KERNEL); | |
2317 | if (!ioc->internal_lookup) { | |
2318 | printk(MPT2SAS_ERR_FMT "internal_lookup: kcalloc failed\n", | |
2319 | ioc->name); | |
2320 | goto out; | |
2321 | } | |
2322 | ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth; | |
2323 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "internal(0x%p): " | |
2324 | "depth(%d), start smid(%d)\n", ioc->name, ioc->internal, | |
2325 | ioc->internal_depth, ioc->internal_smid)); | |
635374e7 EM |
2326 | |
2327 | /* sense buffers, 4 byte align */ | |
595bb0bd | 2328 | sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE; |
635374e7 EM |
2329 | ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4, |
2330 | 0); | |
2331 | if (!ioc->sense_dma_pool) { | |
2332 | printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_create failed\n", | |
2333 | ioc->name); | |
2334 | goto out; | |
2335 | } | |
2336 | ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL, | |
2337 | &ioc->sense_dma); | |
2338 | if (!ioc->sense) { | |
2339 | printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_alloc failed\n", | |
2340 | ioc->name); | |
2341 | goto out; | |
2342 | } | |
2343 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT | |
2344 | "sense pool(0x%p): depth(%d), element_size(%d), pool_size" | |
595bb0bd | 2345 | "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth, |
635374e7 EM |
2346 | SCSI_SENSE_BUFFERSIZE, sz/1024)); |
2347 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_dma(0x%llx)\n", | |
2348 | ioc->name, (unsigned long long)ioc->sense_dma)); | |
2349 | total_sz += sz; | |
2350 | ||
2351 | /* reply pool, 4 byte align */ | |
2352 | sz = ioc->reply_free_queue_depth * ioc->reply_sz; | |
2353 | ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4, | |
2354 | 0); | |
2355 | if (!ioc->reply_dma_pool) { | |
2356 | printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_create failed\n", | |
2357 | ioc->name); | |
2358 | goto out; | |
2359 | } | |
2360 | ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL, | |
2361 | &ioc->reply_dma); | |
2362 | if (!ioc->reply) { | |
2363 | printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_alloc failed\n", | |
2364 | ioc->name); | |
2365 | goto out; | |
2366 | } | |
dd3741d3 KD |
2367 | ioc->reply_dma_min_address = (u32)(ioc->reply_dma); |
2368 | ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz; | |
635374e7 EM |
2369 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply pool(0x%p): depth" |
2370 | "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->reply, | |
2371 | ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024)); | |
2372 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_dma(0x%llx)\n", | |
2373 | ioc->name, (unsigned long long)ioc->reply_dma)); | |
2374 | total_sz += sz; | |
2375 | ||
2376 | /* reply free queue, 16 byte align */ | |
2377 | sz = ioc->reply_free_queue_depth * 4; | |
2378 | ioc->reply_free_dma_pool = pci_pool_create("reply_free pool", | |
2379 | ioc->pdev, sz, 16, 0); | |
2380 | if (!ioc->reply_free_dma_pool) { | |
2381 | printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_create " | |
2382 | "failed\n", ioc->name); | |
2383 | goto out; | |
2384 | } | |
2385 | ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL, | |
2386 | &ioc->reply_free_dma); | |
2387 | if (!ioc->reply_free) { | |
2388 | printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_alloc " | |
2389 | "failed\n", ioc->name); | |
2390 | goto out; | |
2391 | } | |
2392 | memset(ioc->reply_free, 0, sz); | |
2393 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free pool(0x%p): " | |
2394 | "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name, | |
2395 | ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024)); | |
2396 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_dma" | |
2397 | "(0x%llx)\n", ioc->name, (unsigned long long)ioc->reply_free_dma)); | |
2398 | total_sz += sz; | |
2399 | ||
2400 | /* reply post queue, 16 byte align */ | |
2401 | sz = ioc->reply_post_queue_depth * sizeof(Mpi2DefaultReplyDescriptor_t); | |
2402 | ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool", | |
2403 | ioc->pdev, sz, 16, 0); | |
2404 | if (!ioc->reply_post_free_dma_pool) { | |
2405 | printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_create " | |
2406 | "failed\n", ioc->name); | |
2407 | goto out; | |
2408 | } | |
2409 | ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool , | |
2410 | GFP_KERNEL, &ioc->reply_post_free_dma); | |
2411 | if (!ioc->reply_post_free) { | |
2412 | printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_alloc " | |
2413 | "failed\n", ioc->name); | |
2414 | goto out; | |
2415 | } | |
2416 | memset(ioc->reply_post_free, 0, sz); | |
2417 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply post free pool" | |
2418 | "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n", | |
2419 | ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8, | |
2420 | sz/1024)); | |
2421 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_post_free_dma = " | |
2422 | "(0x%llx)\n", ioc->name, (unsigned long long) | |
2423 | ioc->reply_post_free_dma)); | |
2424 | total_sz += sz; | |
2425 | ||
2426 | ioc->config_page_sz = 512; | |
2427 | ioc->config_page = pci_alloc_consistent(ioc->pdev, | |
2428 | ioc->config_page_sz, &ioc->config_page_dma); | |
2429 | if (!ioc->config_page) { | |
2430 | printk(MPT2SAS_ERR_FMT "config page: pci_pool_alloc " | |
2431 | "failed\n", ioc->name); | |
2432 | goto out; | |
2433 | } | |
2434 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config page(0x%p): size" | |
2435 | "(%d)\n", ioc->name, ioc->config_page, ioc->config_page_sz)); | |
2436 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config_page_dma" | |
2437 | "(0x%llx)\n", ioc->name, (unsigned long long)ioc->config_page_dma)); | |
2438 | total_sz += ioc->config_page_sz; | |
2439 | ||
2440 | printk(MPT2SAS_INFO_FMT "Allocated physical memory: size(%d kB)\n", | |
2441 | ioc->name, total_sz/1024); | |
2442 | printk(MPT2SAS_INFO_FMT "Current Controller Queue Depth(%d), " | |
2443 | "Max Controller Queue Depth(%d)\n", | |
2444 | ioc->name, ioc->shost->can_queue, facts->RequestCredit); | |
2445 | printk(MPT2SAS_INFO_FMT "Scatter Gather Elements per IO(%d)\n", | |
2446 | ioc->name, ioc->shost->sg_tablesize); | |
2447 | return 0; | |
2448 | ||
2449 | out: | |
635374e7 EM |
2450 | return -ENOMEM; |
2451 | } | |
2452 | ||
2453 | ||
2454 | /** | |
2455 | * mpt2sas_base_get_iocstate - Get the current state of a MPT adapter. | |
2456 | * @ioc: Pointer to MPT_ADAPTER structure | |
2457 | * @cooked: Request raw or cooked IOC state | |
2458 | * | |
2459 | * Returns all IOC Doorbell register bits if cooked==0, else just the | |
2460 | * Doorbell bits in MPI_IOC_STATE_MASK. | |
2461 | */ | |
2462 | u32 | |
2463 | mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked) | |
2464 | { | |
2465 | u32 s, sc; | |
2466 | ||
2467 | s = readl(&ioc->chip->Doorbell); | |
2468 | sc = s & MPI2_IOC_STATE_MASK; | |
2469 | return cooked ? sc : s; | |
2470 | } | |
2471 | ||
2472 | /** | |
2473 | * _base_wait_on_iocstate - waiting on a particular ioc state | |
2474 | * @ioc_state: controller state { READY, OPERATIONAL, or RESET } | |
2475 | * @timeout: timeout in second | |
2476 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
2477 | * | |
2478 | * Returns 0 for success, non-zero for failure. | |
2479 | */ | |
2480 | static int | |
2481 | _base_wait_on_iocstate(struct MPT2SAS_ADAPTER *ioc, u32 ioc_state, int timeout, | |
2482 | int sleep_flag) | |
2483 | { | |
2484 | u32 count, cntdn; | |
2485 | u32 current_state; | |
2486 | ||
2487 | count = 0; | |
2488 | cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; | |
2489 | do { | |
2490 | current_state = mpt2sas_base_get_iocstate(ioc, 1); | |
2491 | if (current_state == ioc_state) | |
2492 | return 0; | |
2493 | if (count && current_state == MPI2_IOC_STATE_FAULT) | |
2494 | break; | |
2495 | if (sleep_flag == CAN_SLEEP) | |
2496 | msleep(1); | |
2497 | else | |
2498 | udelay(500); | |
2499 | count++; | |
2500 | } while (--cntdn); | |
2501 | ||
2502 | return current_state; | |
2503 | } | |
2504 | ||
2505 | /** | |
2506 | * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by | |
2507 | * a write to the doorbell) | |
2508 | * @ioc: per adapter object | |
2509 | * @timeout: timeout in second | |
2510 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
2511 | * | |
2512 | * Returns 0 for success, non-zero for failure. | |
2513 | * | |
2514 | * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell. | |
2515 | */ | |
2516 | static int | |
2517 | _base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout, | |
2518 | int sleep_flag) | |
2519 | { | |
2520 | u32 cntdn, count; | |
2521 | u32 int_status; | |
2522 | ||
2523 | count = 0; | |
2524 | cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; | |
2525 | do { | |
2526 | int_status = readl(&ioc->chip->HostInterruptStatus); | |
2527 | if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { | |
eabb08ad | 2528 | dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
635374e7 EM |
2529 | "successfull count(%d), timeout(%d)\n", ioc->name, |
2530 | __func__, count, timeout)); | |
2531 | return 0; | |
2532 | } | |
2533 | if (sleep_flag == CAN_SLEEP) | |
2534 | msleep(1); | |
2535 | else | |
2536 | udelay(500); | |
2537 | count++; | |
2538 | } while (--cntdn); | |
2539 | ||
2540 | printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), " | |
2541 | "int_status(%x)!\n", ioc->name, __func__, count, int_status); | |
2542 | return -EFAULT; | |
2543 | } | |
2544 | ||
2545 | /** | |
2546 | * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell. | |
2547 | * @ioc: per adapter object | |
2548 | * @timeout: timeout in second | |
2549 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
2550 | * | |
2551 | * Returns 0 for success, non-zero for failure. | |
2552 | * | |
2553 | * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to | |
2554 | * doorbell. | |
2555 | */ | |
2556 | static int | |
2557 | _base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout, | |
2558 | int sleep_flag) | |
2559 | { | |
2560 | u32 cntdn, count; | |
2561 | u32 int_status; | |
2562 | u32 doorbell; | |
2563 | ||
2564 | count = 0; | |
2565 | cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; | |
2566 | do { | |
2567 | int_status = readl(&ioc->chip->HostInterruptStatus); | |
2568 | if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { | |
eabb08ad | 2569 | dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
635374e7 EM |
2570 | "successfull count(%d), timeout(%d)\n", ioc->name, |
2571 | __func__, count, timeout)); | |
2572 | return 0; | |
2573 | } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { | |
2574 | doorbell = readl(&ioc->chip->Doorbell); | |
2575 | if ((doorbell & MPI2_IOC_STATE_MASK) == | |
2576 | MPI2_IOC_STATE_FAULT) { | |
2577 | mpt2sas_base_fault_info(ioc , doorbell); | |
2578 | return -EFAULT; | |
2579 | } | |
2580 | } else if (int_status == 0xFFFFFFFF) | |
2581 | goto out; | |
2582 | ||
2583 | if (sleep_flag == CAN_SLEEP) | |
2584 | msleep(1); | |
2585 | else | |
2586 | udelay(500); | |
2587 | count++; | |
2588 | } while (--cntdn); | |
2589 | ||
2590 | out: | |
2591 | printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), " | |
2592 | "int_status(%x)!\n", ioc->name, __func__, count, int_status); | |
2593 | return -EFAULT; | |
2594 | } | |
2595 | ||
2596 | /** | |
2597 | * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use | |
2598 | * @ioc: per adapter object | |
2599 | * @timeout: timeout in second | |
2600 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
2601 | * | |
2602 | * Returns 0 for success, non-zero for failure. | |
2603 | * | |
2604 | */ | |
2605 | static int | |
2606 | _base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout, | |
2607 | int sleep_flag) | |
2608 | { | |
2609 | u32 cntdn, count; | |
2610 | u32 doorbell_reg; | |
2611 | ||
2612 | count = 0; | |
2613 | cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; | |
2614 | do { | |
2615 | doorbell_reg = readl(&ioc->chip->Doorbell); | |
2616 | if (!(doorbell_reg & MPI2_DOORBELL_USED)) { | |
eabb08ad | 2617 | dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
635374e7 EM |
2618 | "successfull count(%d), timeout(%d)\n", ioc->name, |
2619 | __func__, count, timeout)); | |
2620 | return 0; | |
2621 | } | |
2622 | if (sleep_flag == CAN_SLEEP) | |
2623 | msleep(1); | |
2624 | else | |
2625 | udelay(500); | |
2626 | count++; | |
2627 | } while (--cntdn); | |
2628 | ||
2629 | printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), " | |
2630 | "doorbell_reg(%x)!\n", ioc->name, __func__, count, doorbell_reg); | |
2631 | return -EFAULT; | |
2632 | } | |
2633 | ||
2634 | /** | |
2635 | * _base_send_ioc_reset - send doorbell reset | |
2636 | * @ioc: per adapter object | |
2637 | * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET | |
2638 | * @timeout: timeout in second | |
2639 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
2640 | * | |
2641 | * Returns 0 for success, non-zero for failure. | |
2642 | */ | |
2643 | static int | |
2644 | _base_send_ioc_reset(struct MPT2SAS_ADAPTER *ioc, u8 reset_type, int timeout, | |
2645 | int sleep_flag) | |
2646 | { | |
2647 | u32 ioc_state; | |
2648 | int r = 0; | |
2649 | ||
2650 | if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) { | |
2651 | printk(MPT2SAS_ERR_FMT "%s: unknown reset_type\n", | |
2652 | ioc->name, __func__); | |
2653 | return -EFAULT; | |
2654 | } | |
2655 | ||
2656 | if (!(ioc->facts.IOCCapabilities & | |
2657 | MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY)) | |
2658 | return -EFAULT; | |
2659 | ||
2660 | printk(MPT2SAS_INFO_FMT "sending message unit reset !!\n", ioc->name); | |
2661 | ||
2662 | writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT, | |
2663 | &ioc->chip->Doorbell); | |
2664 | if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) { | |
2665 | r = -EFAULT; | |
2666 | goto out; | |
2667 | } | |
2668 | ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, | |
2669 | timeout, sleep_flag); | |
2670 | if (ioc_state) { | |
2671 | printk(MPT2SAS_ERR_FMT "%s: failed going to ready state " | |
2672 | " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); | |
2673 | r = -EFAULT; | |
2674 | goto out; | |
2675 | } | |
2676 | out: | |
2677 | printk(MPT2SAS_INFO_FMT "message unit reset: %s\n", | |
2678 | ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); | |
2679 | return r; | |
2680 | } | |
2681 | ||
2682 | /** | |
2683 | * _base_handshake_req_reply_wait - send request thru doorbell interface | |
2684 | * @ioc: per adapter object | |
2685 | * @request_bytes: request length | |
2686 | * @request: pointer having request payload | |
2687 | * @reply_bytes: reply length | |
2688 | * @reply: pointer to reply payload | |
2689 | * @timeout: timeout in second | |
2690 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
2691 | * | |
2692 | * Returns 0 for success, non-zero for failure. | |
2693 | */ | |
2694 | static int | |
2695 | _base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes, | |
2696 | u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag) | |
2697 | { | |
2698 | MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply; | |
2699 | int i; | |
2700 | u8 failed; | |
2701 | u16 dummy; | |
2702 | u32 *mfp; | |
2703 | ||
2704 | /* make sure doorbell is not in use */ | |
2705 | if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { | |
2706 | printk(MPT2SAS_ERR_FMT "doorbell is in use " | |
2707 | " (line=%d)\n", ioc->name, __LINE__); | |
2708 | return -EFAULT; | |
2709 | } | |
2710 | ||
2711 | /* clear pending doorbell interrupts from previous state changes */ | |
2712 | if (readl(&ioc->chip->HostInterruptStatus) & | |
2713 | MPI2_HIS_IOC2SYS_DB_STATUS) | |
2714 | writel(0, &ioc->chip->HostInterruptStatus); | |
2715 | ||
2716 | /* send message to ioc */ | |
2717 | writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) | | |
2718 | ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)), | |
2719 | &ioc->chip->Doorbell); | |
2720 | ||
29786e19 | 2721 | if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) { |
635374e7 EM |
2722 | printk(MPT2SAS_ERR_FMT "doorbell handshake " |
2723 | "int failed (line=%d)\n", ioc->name, __LINE__); | |
2724 | return -EFAULT; | |
2725 | } | |
2726 | writel(0, &ioc->chip->HostInterruptStatus); | |
2727 | ||
2728 | if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) { | |
2729 | printk(MPT2SAS_ERR_FMT "doorbell handshake " | |
2730 | "ack failed (line=%d)\n", ioc->name, __LINE__); | |
2731 | return -EFAULT; | |
2732 | } | |
2733 | ||
2734 | /* send message 32-bits at a time */ | |
2735 | for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) { | |
2736 | writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell); | |
2737 | if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) | |
2738 | failed = 1; | |
2739 | } | |
2740 | ||
2741 | if (failed) { | |
2742 | printk(MPT2SAS_ERR_FMT "doorbell handshake " | |
2743 | "sending request failed (line=%d)\n", ioc->name, __LINE__); | |
2744 | return -EFAULT; | |
2745 | } | |
2746 | ||
2747 | /* now wait for the reply */ | |
2748 | if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) { | |
2749 | printk(MPT2SAS_ERR_FMT "doorbell handshake " | |
2750 | "int failed (line=%d)\n", ioc->name, __LINE__); | |
2751 | return -EFAULT; | |
2752 | } | |
2753 | ||
2754 | /* read the first two 16-bits, it gives the total length of the reply */ | |
2755 | reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell) | |
2756 | & MPI2_DOORBELL_DATA_MASK); | |
2757 | writel(0, &ioc->chip->HostInterruptStatus); | |
2758 | if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { | |
2759 | printk(MPT2SAS_ERR_FMT "doorbell handshake " | |
2760 | "int failed (line=%d)\n", ioc->name, __LINE__); | |
2761 | return -EFAULT; | |
2762 | } | |
2763 | reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell) | |
2764 | & MPI2_DOORBELL_DATA_MASK); | |
2765 | writel(0, &ioc->chip->HostInterruptStatus); | |
2766 | ||
2767 | for (i = 2; i < default_reply->MsgLength * 2; i++) { | |
2768 | if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { | |
2769 | printk(MPT2SAS_ERR_FMT "doorbell " | |
2770 | "handshake int failed (line=%d)\n", ioc->name, | |
2771 | __LINE__); | |
2772 | return -EFAULT; | |
2773 | } | |
2774 | if (i >= reply_bytes/2) /* overflow case */ | |
2775 | dummy = readl(&ioc->chip->Doorbell); | |
2776 | else | |
2777 | reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell) | |
2778 | & MPI2_DOORBELL_DATA_MASK); | |
2779 | writel(0, &ioc->chip->HostInterruptStatus); | |
2780 | } | |
2781 | ||
2782 | _base_wait_for_doorbell_int(ioc, 5, sleep_flag); | |
2783 | if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) { | |
2784 | dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "doorbell is in use " | |
2785 | " (line=%d)\n", ioc->name, __LINE__)); | |
2786 | } | |
2787 | writel(0, &ioc->chip->HostInterruptStatus); | |
2788 | ||
2789 | if (ioc->logging_level & MPT_DEBUG_INIT) { | |
2790 | mfp = (u32 *)reply; | |
eabb08ad | 2791 | printk(KERN_INFO "\toffset:data\n"); |
635374e7 | 2792 | for (i = 0; i < reply_bytes/4; i++) |
eabb08ad | 2793 | printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4, |
635374e7 EM |
2794 | le32_to_cpu(mfp[i])); |
2795 | } | |
2796 | return 0; | |
2797 | } | |
2798 | ||
2799 | /** | |
2800 | * mpt2sas_base_sas_iounit_control - send sas iounit control to FW | |
2801 | * @ioc: per adapter object | |
2802 | * @mpi_reply: the reply payload from FW | |
2803 | * @mpi_request: the request payload sent to FW | |
2804 | * | |
2805 | * The SAS IO Unit Control Request message allows the host to perform low-level | |
2806 | * operations, such as resets on the PHYs of the IO Unit, also allows the host | |
2807 | * to obtain the IOC assigned device handles for a device if it has other | |
2808 | * identifying information about the device, in addition allows the host to | |
2809 | * remove IOC resources associated with the device. | |
2810 | * | |
2811 | * Returns 0 for success, non-zero for failure. | |
2812 | */ | |
2813 | int | |
2814 | mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc, | |
2815 | Mpi2SasIoUnitControlReply_t *mpi_reply, | |
2816 | Mpi2SasIoUnitControlRequest_t *mpi_request) | |
2817 | { | |
2818 | u16 smid; | |
2819 | u32 ioc_state; | |
2820 | unsigned long timeleft; | |
2821 | u8 issue_reset; | |
2822 | int rc; | |
2823 | void *request; | |
2824 | u16 wait_state_count; | |
2825 | ||
eabb08ad | 2826 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
2827 | __func__)); |
2828 | ||
2829 | mutex_lock(&ioc->base_cmds.mutex); | |
2830 | ||
2831 | if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) { | |
2832 | printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n", | |
2833 | ioc->name, __func__); | |
2834 | rc = -EAGAIN; | |
2835 | goto out; | |
2836 | } | |
2837 | ||
2838 | wait_state_count = 0; | |
2839 | ioc_state = mpt2sas_base_get_iocstate(ioc, 1); | |
2840 | while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { | |
2841 | if (wait_state_count++ == 10) { | |
2842 | printk(MPT2SAS_ERR_FMT | |
2843 | "%s: failed due to ioc not operational\n", | |
2844 | ioc->name, __func__); | |
2845 | rc = -EFAULT; | |
2846 | goto out; | |
2847 | } | |
2848 | ssleep(1); | |
2849 | ioc_state = mpt2sas_base_get_iocstate(ioc, 1); | |
2850 | printk(MPT2SAS_INFO_FMT "%s: waiting for " | |
2851 | "operational state(count=%d)\n", ioc->name, | |
2852 | __func__, wait_state_count); | |
2853 | } | |
2854 | ||
2855 | smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); | |
2856 | if (!smid) { | |
2857 | printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", | |
2858 | ioc->name, __func__); | |
2859 | rc = -EAGAIN; | |
2860 | goto out; | |
2861 | } | |
2862 | ||
2863 | rc = 0; | |
2864 | ioc->base_cmds.status = MPT2_CMD_PENDING; | |
2865 | request = mpt2sas_base_get_msg_frame(ioc, smid); | |
2866 | ioc->base_cmds.smid = smid; | |
2867 | memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)); | |
2868 | if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || | |
2869 | mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) | |
2870 | ioc->ioc_link_reset_in_progress = 1; | |
7b936b02 | 2871 | mpt2sas_base_put_smid_default(ioc, smid); |
bcfb6e6e | 2872 | init_completion(&ioc->base_cmds.done); |
635374e7 EM |
2873 | timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, |
2874 | msecs_to_jiffies(10000)); | |
2875 | if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || | |
2876 | mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) && | |
2877 | ioc->ioc_link_reset_in_progress) | |
2878 | ioc->ioc_link_reset_in_progress = 0; | |
2879 | if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { | |
2880 | printk(MPT2SAS_ERR_FMT "%s: timeout\n", | |
2881 | ioc->name, __func__); | |
2882 | _debug_dump_mf(mpi_request, | |
2883 | sizeof(Mpi2SasIoUnitControlRequest_t)/4); | |
2884 | if (!(ioc->base_cmds.status & MPT2_CMD_RESET)) | |
2885 | issue_reset = 1; | |
2886 | goto issue_host_reset; | |
2887 | } | |
2888 | if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID) | |
2889 | memcpy(mpi_reply, ioc->base_cmds.reply, | |
2890 | sizeof(Mpi2SasIoUnitControlReply_t)); | |
2891 | else | |
2892 | memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t)); | |
2893 | ioc->base_cmds.status = MPT2_CMD_NOT_USED; | |
2894 | goto out; | |
2895 | ||
2896 | issue_host_reset: | |
2897 | if (issue_reset) | |
2898 | mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, | |
2899 | FORCE_BIG_HAMMER); | |
2900 | ioc->base_cmds.status = MPT2_CMD_NOT_USED; | |
2901 | rc = -EFAULT; | |
2902 | out: | |
2903 | mutex_unlock(&ioc->base_cmds.mutex); | |
2904 | return rc; | |
2905 | } | |
2906 | ||
2907 | ||
2908 | /** | |
2909 | * mpt2sas_base_scsi_enclosure_processor - sending request to sep device | |
2910 | * @ioc: per adapter object | |
2911 | * @mpi_reply: the reply payload from FW | |
2912 | * @mpi_request: the request payload sent to FW | |
2913 | * | |
2914 | * The SCSI Enclosure Processor request message causes the IOC to | |
2915 | * communicate with SES devices to control LED status signals. | |
2916 | * | |
2917 | * Returns 0 for success, non-zero for failure. | |
2918 | */ | |
2919 | int | |
2920 | mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc, | |
2921 | Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request) | |
2922 | { | |
2923 | u16 smid; | |
2924 | u32 ioc_state; | |
2925 | unsigned long timeleft; | |
2926 | u8 issue_reset; | |
2927 | int rc; | |
2928 | void *request; | |
2929 | u16 wait_state_count; | |
2930 | ||
eabb08ad | 2931 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
2932 | __func__)); |
2933 | ||
2934 | mutex_lock(&ioc->base_cmds.mutex); | |
2935 | ||
2936 | if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) { | |
2937 | printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n", | |
2938 | ioc->name, __func__); | |
2939 | rc = -EAGAIN; | |
2940 | goto out; | |
2941 | } | |
2942 | ||
2943 | wait_state_count = 0; | |
2944 | ioc_state = mpt2sas_base_get_iocstate(ioc, 1); | |
2945 | while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { | |
2946 | if (wait_state_count++ == 10) { | |
2947 | printk(MPT2SAS_ERR_FMT | |
2948 | "%s: failed due to ioc not operational\n", | |
2949 | ioc->name, __func__); | |
2950 | rc = -EFAULT; | |
2951 | goto out; | |
2952 | } | |
2953 | ssleep(1); | |
2954 | ioc_state = mpt2sas_base_get_iocstate(ioc, 1); | |
2955 | printk(MPT2SAS_INFO_FMT "%s: waiting for " | |
2956 | "operational state(count=%d)\n", ioc->name, | |
2957 | __func__, wait_state_count); | |
2958 | } | |
2959 | ||
2960 | smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); | |
2961 | if (!smid) { | |
2962 | printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", | |
2963 | ioc->name, __func__); | |
2964 | rc = -EAGAIN; | |
2965 | goto out; | |
2966 | } | |
2967 | ||
2968 | rc = 0; | |
2969 | ioc->base_cmds.status = MPT2_CMD_PENDING; | |
2970 | request = mpt2sas_base_get_msg_frame(ioc, smid); | |
2971 | ioc->base_cmds.smid = smid; | |
2972 | memcpy(request, mpi_request, sizeof(Mpi2SepReply_t)); | |
7b936b02 | 2973 | mpt2sas_base_put_smid_default(ioc, smid); |
bcfb6e6e | 2974 | init_completion(&ioc->base_cmds.done); |
635374e7 EM |
2975 | timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, |
2976 | msecs_to_jiffies(10000)); | |
2977 | if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { | |
2978 | printk(MPT2SAS_ERR_FMT "%s: timeout\n", | |
2979 | ioc->name, __func__); | |
2980 | _debug_dump_mf(mpi_request, | |
2981 | sizeof(Mpi2SepRequest_t)/4); | |
2982 | if (!(ioc->base_cmds.status & MPT2_CMD_RESET)) | |
2983 | issue_reset = 1; | |
2984 | goto issue_host_reset; | |
2985 | } | |
2986 | if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID) | |
2987 | memcpy(mpi_reply, ioc->base_cmds.reply, | |
2988 | sizeof(Mpi2SepReply_t)); | |
2989 | else | |
2990 | memset(mpi_reply, 0, sizeof(Mpi2SepReply_t)); | |
2991 | ioc->base_cmds.status = MPT2_CMD_NOT_USED; | |
2992 | goto out; | |
2993 | ||
2994 | issue_host_reset: | |
2995 | if (issue_reset) | |
2996 | mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, | |
2997 | FORCE_BIG_HAMMER); | |
2998 | ioc->base_cmds.status = MPT2_CMD_NOT_USED; | |
2999 | rc = -EFAULT; | |
3000 | out: | |
3001 | mutex_unlock(&ioc->base_cmds.mutex); | |
3002 | return rc; | |
3003 | } | |
3004 | ||
3005 | /** | |
3006 | * _base_get_port_facts - obtain port facts reply and save in ioc | |
3007 | * @ioc: per adapter object | |
3008 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
3009 | * | |
3010 | * Returns 0 for success, non-zero for failure. | |
3011 | */ | |
3012 | static int | |
3013 | _base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag) | |
3014 | { | |
3015 | Mpi2PortFactsRequest_t mpi_request; | |
3016 | Mpi2PortFactsReply_t mpi_reply, *pfacts; | |
3017 | int mpi_reply_sz, mpi_request_sz, r; | |
3018 | ||
eabb08ad | 3019 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
3020 | __func__)); |
3021 | ||
3022 | mpi_reply_sz = sizeof(Mpi2PortFactsReply_t); | |
3023 | mpi_request_sz = sizeof(Mpi2PortFactsRequest_t); | |
3024 | memset(&mpi_request, 0, mpi_request_sz); | |
3025 | mpi_request.Function = MPI2_FUNCTION_PORT_FACTS; | |
3026 | mpi_request.PortNumber = port; | |
3027 | r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, | |
3028 | (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); | |
3029 | ||
3030 | if (r != 0) { | |
3031 | printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", | |
3032 | ioc->name, __func__, r); | |
3033 | return r; | |
3034 | } | |
3035 | ||
3036 | pfacts = &ioc->pfacts[port]; | |
3037 | memset(pfacts, 0, sizeof(Mpi2PortFactsReply_t)); | |
3038 | pfacts->PortNumber = mpi_reply.PortNumber; | |
3039 | pfacts->VP_ID = mpi_reply.VP_ID; | |
3040 | pfacts->VF_ID = mpi_reply.VF_ID; | |
3041 | pfacts->MaxPostedCmdBuffers = | |
3042 | le16_to_cpu(mpi_reply.MaxPostedCmdBuffers); | |
3043 | ||
3044 | return 0; | |
3045 | } | |
3046 | ||
3047 | /** | |
3048 | * _base_get_ioc_facts - obtain ioc facts reply and save in ioc | |
3049 | * @ioc: per adapter object | |
3050 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
3051 | * | |
3052 | * Returns 0 for success, non-zero for failure. | |
3053 | */ | |
3054 | static int | |
3055 | _base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) | |
3056 | { | |
3057 | Mpi2IOCFactsRequest_t mpi_request; | |
3058 | Mpi2IOCFactsReply_t mpi_reply, *facts; | |
3059 | int mpi_reply_sz, mpi_request_sz, r; | |
3060 | ||
eabb08ad | 3061 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
3062 | __func__)); |
3063 | ||
3064 | mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t); | |
3065 | mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t); | |
3066 | memset(&mpi_request, 0, mpi_request_sz); | |
3067 | mpi_request.Function = MPI2_FUNCTION_IOC_FACTS; | |
3068 | r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, | |
3069 | (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); | |
3070 | ||
3071 | if (r != 0) { | |
3072 | printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", | |
3073 | ioc->name, __func__, r); | |
3074 | return r; | |
3075 | } | |
3076 | ||
3077 | facts = &ioc->facts; | |
3078 | memset(facts, 0, sizeof(Mpi2IOCFactsReply_t)); | |
3079 | facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion); | |
3080 | facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion); | |
3081 | facts->VP_ID = mpi_reply.VP_ID; | |
3082 | facts->VF_ID = mpi_reply.VF_ID; | |
3083 | facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions); | |
3084 | facts->MaxChainDepth = mpi_reply.MaxChainDepth; | |
3085 | facts->WhoInit = mpi_reply.WhoInit; | |
3086 | facts->NumberOfPorts = mpi_reply.NumberOfPorts; | |
3087 | facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit); | |
3088 | facts->MaxReplyDescriptorPostQueueDepth = | |
3089 | le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth); | |
3090 | facts->ProductID = le16_to_cpu(mpi_reply.ProductID); | |
3091 | facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities); | |
3092 | if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID)) | |
3093 | ioc->ir_firmware = 1; | |
3094 | facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word); | |
3095 | facts->IOCRequestFrameSize = | |
3096 | le16_to_cpu(mpi_reply.IOCRequestFrameSize); | |
3097 | facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators); | |
3098 | facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets); | |
3099 | ioc->shost->max_id = -1; | |
3100 | facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders); | |
3101 | facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures); | |
3102 | facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags); | |
3103 | facts->HighPriorityCredit = | |
3104 | le16_to_cpu(mpi_reply.HighPriorityCredit); | |
3105 | facts->ReplyFrameSize = mpi_reply.ReplyFrameSize; | |
3106 | facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle); | |
3107 | ||
3108 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hba queue depth(%d), " | |
3109 | "max chains per io(%d)\n", ioc->name, facts->RequestCredit, | |
3110 | facts->MaxChainDepth)); | |
3111 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request frame size(%d), " | |
3112 | "reply frame size(%d)\n", ioc->name, | |
3113 | facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4)); | |
3114 | return 0; | |
3115 | } | |
3116 | ||
3117 | /** | |
3118 | * _base_send_ioc_init - send ioc_init to firmware | |
3119 | * @ioc: per adapter object | |
635374e7 EM |
3120 | * @sleep_flag: CAN_SLEEP or NO_SLEEP |
3121 | * | |
3122 | * Returns 0 for success, non-zero for failure. | |
3123 | */ | |
3124 | static int | |
7b936b02 | 3125 | _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) |
635374e7 EM |
3126 | { |
3127 | Mpi2IOCInitRequest_t mpi_request; | |
3128 | Mpi2IOCInitReply_t mpi_reply; | |
3129 | int r; | |
a8ebd76c | 3130 | struct timeval current_time; |
463217bf | 3131 | u16 ioc_status; |
635374e7 | 3132 | |
eabb08ad | 3133 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
3134 | __func__)); |
3135 | ||
3136 | memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t)); | |
3137 | mpi_request.Function = MPI2_FUNCTION_IOC_INIT; | |
3138 | mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER; | |
7b936b02 KD |
3139 | mpi_request.VF_ID = 0; /* TODO */ |
3140 | mpi_request.VP_ID = 0; | |
635374e7 EM |
3141 | mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION); |
3142 | mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION); | |
3143 | ||
3144 | /* In MPI Revision I (0xA), the SystemReplyFrameSize(offset 0x18) was | |
3145 | * removed and made reserved. For those with older firmware will need | |
3146 | * this fix. It was decided that the Reply and Request frame sizes are | |
3147 | * the same. | |
3148 | */ | |
3149 | if ((ioc->facts.HeaderVersion >> 8) < 0xA) { | |
3150 | mpi_request.Reserved7 = cpu_to_le16(ioc->reply_sz); | |
3151 | /* mpi_request.SystemReplyFrameSize = | |
3152 | * cpu_to_le16(ioc->reply_sz); | |
3153 | */ | |
3154 | } | |
3155 | ||
3156 | mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4); | |
3157 | mpi_request.ReplyDescriptorPostQueueDepth = | |
3158 | cpu_to_le16(ioc->reply_post_queue_depth); | |
3159 | mpi_request.ReplyFreeQueueDepth = | |
3160 | cpu_to_le16(ioc->reply_free_queue_depth); | |
3161 | ||
3162 | #if BITS_PER_LONG > 32 | |
3163 | mpi_request.SenseBufferAddressHigh = | |
3164 | cpu_to_le32(ioc->sense_dma >> 32); | |
3165 | mpi_request.SystemReplyAddressHigh = | |
3166 | cpu_to_le32(ioc->reply_dma >> 32); | |
3167 | mpi_request.SystemRequestFrameBaseAddress = | |
3168 | cpu_to_le64(ioc->request_dma); | |
3169 | mpi_request.ReplyFreeQueueAddress = | |
3170 | cpu_to_le64(ioc->reply_free_dma); | |
3171 | mpi_request.ReplyDescriptorPostQueueAddress = | |
3172 | cpu_to_le64(ioc->reply_post_free_dma); | |
3173 | #else | |
3174 | mpi_request.SystemRequestFrameBaseAddress = | |
3175 | cpu_to_le32(ioc->request_dma); | |
3176 | mpi_request.ReplyFreeQueueAddress = | |
3177 | cpu_to_le32(ioc->reply_free_dma); | |
3178 | mpi_request.ReplyDescriptorPostQueueAddress = | |
3179 | cpu_to_le32(ioc->reply_post_free_dma); | |
3180 | #endif | |
3181 | ||
a8ebd76c KD |
3182 | /* This time stamp specifies number of milliseconds |
3183 | * since epoch ~ midnight January 1, 1970. | |
3184 | */ | |
3185 | do_gettimeofday(¤t_time); | |
7921b35c KD |
3186 | mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 + |
3187 | (current_time.tv_usec / 1000)); | |
a8ebd76c | 3188 | |
635374e7 EM |
3189 | if (ioc->logging_level & MPT_DEBUG_INIT) { |
3190 | u32 *mfp; | |
3191 | int i; | |
3192 | ||
3193 | mfp = (u32 *)&mpi_request; | |
eabb08ad | 3194 | printk(KERN_INFO "\toffset:data\n"); |
635374e7 | 3195 | for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++) |
eabb08ad | 3196 | printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4, |
635374e7 EM |
3197 | le32_to_cpu(mfp[i])); |
3198 | } | |
3199 | ||
3200 | r = _base_handshake_req_reply_wait(ioc, | |
3201 | sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request, | |
3202 | sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10, | |
3203 | sleep_flag); | |
3204 | ||
3205 | if (r != 0) { | |
3206 | printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", | |
3207 | ioc->name, __func__, r); | |
3208 | return r; | |
3209 | } | |
3210 | ||
463217bf KD |
3211 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; |
3212 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS || | |
635374e7 EM |
3213 | mpi_reply.IOCLogInfo) { |
3214 | printk(MPT2SAS_ERR_FMT "%s: failed\n", ioc->name, __func__); | |
3215 | r = -EIO; | |
3216 | } | |
3217 | ||
3218 | return 0; | |
3219 | } | |
3220 | ||
3221 | /** | |
3222 | * _base_send_port_enable - send port_enable(discovery stuff) to firmware | |
3223 | * @ioc: per adapter object | |
635374e7 EM |
3224 | * @sleep_flag: CAN_SLEEP or NO_SLEEP |
3225 | * | |
3226 | * Returns 0 for success, non-zero for failure. | |
3227 | */ | |
3228 | static int | |
7b936b02 | 3229 | _base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) |
635374e7 EM |
3230 | { |
3231 | Mpi2PortEnableRequest_t *mpi_request; | |
3232 | u32 ioc_state; | |
3233 | unsigned long timeleft; | |
3234 | int r = 0; | |
3235 | u16 smid; | |
3236 | ||
3237 | printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name); | |
3238 | ||
3239 | if (ioc->base_cmds.status & MPT2_CMD_PENDING) { | |
3240 | printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n", | |
3241 | ioc->name, __func__); | |
3242 | return -EAGAIN; | |
3243 | } | |
3244 | ||
3245 | smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); | |
3246 | if (!smid) { | |
3247 | printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", | |
3248 | ioc->name, __func__); | |
3249 | return -EAGAIN; | |
3250 | } | |
3251 | ||
3252 | ioc->base_cmds.status = MPT2_CMD_PENDING; | |
3253 | mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); | |
3254 | ioc->base_cmds.smid = smid; | |
3255 | memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); | |
3256 | mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; | |
7b936b02 KD |
3257 | mpi_request->VF_ID = 0; /* TODO */ |
3258 | mpi_request->VP_ID = 0; | |
635374e7 | 3259 | |
7b936b02 | 3260 | mpt2sas_base_put_smid_default(ioc, smid); |
bcfb6e6e | 3261 | init_completion(&ioc->base_cmds.done); |
635374e7 EM |
3262 | timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, |
3263 | 300*HZ); | |
3264 | if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { | |
3265 | printk(MPT2SAS_ERR_FMT "%s: timeout\n", | |
3266 | ioc->name, __func__); | |
3267 | _debug_dump_mf(mpi_request, | |
3268 | sizeof(Mpi2PortEnableRequest_t)/4); | |
3269 | if (ioc->base_cmds.status & MPT2_CMD_RESET) | |
3270 | r = -EFAULT; | |
3271 | else | |
3272 | r = -ETIME; | |
3273 | goto out; | |
3274 | } else | |
eabb08ad | 3275 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n", |
635374e7 EM |
3276 | ioc->name, __func__)); |
3277 | ||
3278 | ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL, | |
3279 | 60, sleep_flag); | |
3280 | if (ioc_state) { | |
3281 | printk(MPT2SAS_ERR_FMT "%s: failed going to operational state " | |
3282 | " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); | |
3283 | r = -EFAULT; | |
3284 | } | |
3285 | out: | |
3286 | ioc->base_cmds.status = MPT2_CMD_NOT_USED; | |
3287 | printk(MPT2SAS_INFO_FMT "port enable: %s\n", | |
3288 | ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); | |
3289 | return r; | |
3290 | } | |
3291 | ||
3292 | /** | |
3293 | * _base_unmask_events - turn on notification for this event | |
3294 | * @ioc: per adapter object | |
3295 | * @event: firmware event | |
3296 | * | |
3297 | * The mask is stored in ioc->event_masks. | |
3298 | */ | |
3299 | static void | |
3300 | _base_unmask_events(struct MPT2SAS_ADAPTER *ioc, u16 event) | |
3301 | { | |
3302 | u32 desired_event; | |
3303 | ||
3304 | if (event >= 128) | |
3305 | return; | |
3306 | ||
3307 | desired_event = (1 << (event % 32)); | |
3308 | ||
3309 | if (event < 32) | |
3310 | ioc->event_masks[0] &= ~desired_event; | |
3311 | else if (event < 64) | |
3312 | ioc->event_masks[1] &= ~desired_event; | |
3313 | else if (event < 96) | |
3314 | ioc->event_masks[2] &= ~desired_event; | |
3315 | else if (event < 128) | |
3316 | ioc->event_masks[3] &= ~desired_event; | |
3317 | } | |
3318 | ||
3319 | /** | |
3320 | * _base_event_notification - send event notification | |
3321 | * @ioc: per adapter object | |
635374e7 EM |
3322 | * @sleep_flag: CAN_SLEEP or NO_SLEEP |
3323 | * | |
3324 | * Returns 0 for success, non-zero for failure. | |
3325 | */ | |
3326 | static int | |
7b936b02 | 3327 | _base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) |
635374e7 EM |
3328 | { |
3329 | Mpi2EventNotificationRequest_t *mpi_request; | |
3330 | unsigned long timeleft; | |
3331 | u16 smid; | |
3332 | int r = 0; | |
3333 | int i; | |
3334 | ||
eabb08ad | 3335 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
3336 | __func__)); |
3337 | ||
3338 | if (ioc->base_cmds.status & MPT2_CMD_PENDING) { | |
3339 | printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n", | |
3340 | ioc->name, __func__); | |
3341 | return -EAGAIN; | |
3342 | } | |
3343 | ||
3344 | smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); | |
3345 | if (!smid) { | |
3346 | printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", | |
3347 | ioc->name, __func__); | |
3348 | return -EAGAIN; | |
3349 | } | |
3350 | ioc->base_cmds.status = MPT2_CMD_PENDING; | |
3351 | mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); | |
3352 | ioc->base_cmds.smid = smid; | |
3353 | memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t)); | |
3354 | mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; | |
7b936b02 KD |
3355 | mpi_request->VF_ID = 0; /* TODO */ |
3356 | mpi_request->VP_ID = 0; | |
635374e7 EM |
3357 | for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) |
3358 | mpi_request->EventMasks[i] = | |
e94f6747 | 3359 | cpu_to_le32(ioc->event_masks[i]); |
7b936b02 | 3360 | mpt2sas_base_put_smid_default(ioc, smid); |
bcfb6e6e | 3361 | init_completion(&ioc->base_cmds.done); |
635374e7 EM |
3362 | timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ); |
3363 | if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { | |
3364 | printk(MPT2SAS_ERR_FMT "%s: timeout\n", | |
3365 | ioc->name, __func__); | |
3366 | _debug_dump_mf(mpi_request, | |
3367 | sizeof(Mpi2EventNotificationRequest_t)/4); | |
3368 | if (ioc->base_cmds.status & MPT2_CMD_RESET) | |
3369 | r = -EFAULT; | |
3370 | else | |
3371 | r = -ETIME; | |
3372 | } else | |
eabb08ad | 3373 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n", |
635374e7 EM |
3374 | ioc->name, __func__)); |
3375 | ioc->base_cmds.status = MPT2_CMD_NOT_USED; | |
3376 | return r; | |
3377 | } | |
3378 | ||
3379 | /** | |
3380 | * mpt2sas_base_validate_event_type - validating event types | |
3381 | * @ioc: per adapter object | |
3382 | * @event: firmware event | |
3383 | * | |
3384 | * This will turn on firmware event notification when application | |
3385 | * ask for that event. We don't mask events that are already enabled. | |
3386 | */ | |
3387 | void | |
3388 | mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type) | |
3389 | { | |
3390 | int i, j; | |
3391 | u32 event_mask, desired_event; | |
3392 | u8 send_update_to_fw; | |
3393 | ||
3394 | for (i = 0, send_update_to_fw = 0; i < | |
3395 | MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) { | |
3396 | event_mask = ~event_type[i]; | |
3397 | desired_event = 1; | |
3398 | for (j = 0; j < 32; j++) { | |
3399 | if (!(event_mask & desired_event) && | |
3400 | (ioc->event_masks[i] & desired_event)) { | |
3401 | ioc->event_masks[i] &= ~desired_event; | |
3402 | send_update_to_fw = 1; | |
3403 | } | |
3404 | desired_event = (desired_event << 1); | |
3405 | } | |
3406 | } | |
3407 | ||
3408 | if (!send_update_to_fw) | |
3409 | return; | |
3410 | ||
3411 | mutex_lock(&ioc->base_cmds.mutex); | |
7b936b02 | 3412 | _base_event_notification(ioc, CAN_SLEEP); |
635374e7 EM |
3413 | mutex_unlock(&ioc->base_cmds.mutex); |
3414 | } | |
3415 | ||
3416 | /** | |
3417 | * _base_diag_reset - the "big hammer" start of day reset | |
3418 | * @ioc: per adapter object | |
3419 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
3420 | * | |
3421 | * Returns 0 for success, non-zero for failure. | |
3422 | */ | |
3423 | static int | |
3424 | _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) | |
3425 | { | |
3426 | u32 host_diagnostic; | |
3427 | u32 ioc_state; | |
3428 | u32 count; | |
3429 | u32 hcb_size; | |
3430 | ||
3431 | printk(MPT2SAS_INFO_FMT "sending diag reset !!\n", ioc->name); | |
3432 | ||
3433 | _base_save_msix_table(ioc); | |
3434 | ||
eabb08ad | 3435 | drsprintk(ioc, printk(MPT2SAS_INFO_FMT "clear interrupts\n", |
635374e7 | 3436 | ioc->name)); |
635374e7 EM |
3437 | |
3438 | count = 0; | |
3439 | do { | |
3440 | /* Write magic sequence to WriteSequence register | |
3441 | * Loop until in diagnostic mode | |
3442 | */ | |
eabb08ad | 3443 | drsprintk(ioc, printk(MPT2SAS_INFO_FMT "write magic " |
635374e7 EM |
3444 | "sequence\n", ioc->name)); |
3445 | writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); | |
3446 | writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence); | |
3447 | writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence); | |
3448 | writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence); | |
3449 | writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence); | |
3450 | writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence); | |
3451 | writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence); | |
3452 | ||
3453 | /* wait 100 msec */ | |
3454 | if (sleep_flag == CAN_SLEEP) | |
3455 | msleep(100); | |
3456 | else | |
3457 | mdelay(100); | |
3458 | ||
3459 | if (count++ > 20) | |
3460 | goto out; | |
3461 | ||
3462 | host_diagnostic = readl(&ioc->chip->HostDiagnostic); | |
eabb08ad | 3463 | drsprintk(ioc, printk(MPT2SAS_INFO_FMT "wrote magic " |
635374e7 EM |
3464 | "sequence: count(%d), host_diagnostic(0x%08x)\n", |
3465 | ioc->name, count, host_diagnostic)); | |
3466 | ||
3467 | } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0); | |
3468 | ||
3469 | hcb_size = readl(&ioc->chip->HCBSize); | |
3470 | ||
eabb08ad | 3471 | drsprintk(ioc, printk(MPT2SAS_INFO_FMT "diag reset: issued\n", |
635374e7 EM |
3472 | ioc->name)); |
3473 | writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, | |
3474 | &ioc->chip->HostDiagnostic); | |
3475 | ||
3476 | /* don't access any registers for 50 milliseconds */ | |
3477 | msleep(50); | |
3478 | ||
3479 | /* 300 second max wait */ | |
3480 | for (count = 0; count < 3000000 ; count++) { | |
3481 | ||
3482 | host_diagnostic = readl(&ioc->chip->HostDiagnostic); | |
3483 | ||
3484 | if (host_diagnostic == 0xFFFFFFFF) | |
3485 | goto out; | |
3486 | if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER)) | |
3487 | break; | |
3488 | ||
3489 | /* wait 100 msec */ | |
3490 | if (sleep_flag == CAN_SLEEP) | |
3491 | msleep(1); | |
3492 | else | |
3493 | mdelay(1); | |
3494 | } | |
3495 | ||
3496 | if (host_diagnostic & MPI2_DIAG_HCB_MODE) { | |
3497 | ||
eabb08ad | 3498 | drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter " |
635374e7 EM |
3499 | "assuming the HCB Address points to good F/W\n", |
3500 | ioc->name)); | |
3501 | host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK; | |
3502 | host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW; | |
3503 | writel(host_diagnostic, &ioc->chip->HostDiagnostic); | |
3504 | ||
eabb08ad | 3505 | drsprintk(ioc, printk(MPT2SAS_INFO_FMT |
635374e7 EM |
3506 | "re-enable the HCDW\n", ioc->name)); |
3507 | writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE, | |
3508 | &ioc->chip->HCBSize); | |
3509 | } | |
3510 | ||
eabb08ad | 3511 | drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter\n", |
635374e7 EM |
3512 | ioc->name)); |
3513 | writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET, | |
3514 | &ioc->chip->HostDiagnostic); | |
3515 | ||
eabb08ad | 3516 | drsprintk(ioc, printk(MPT2SAS_INFO_FMT "disable writes to the " |
635374e7 EM |
3517 | "diagnostic register\n", ioc->name)); |
3518 | writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); | |
3519 | ||
eabb08ad | 3520 | drsprintk(ioc, printk(MPT2SAS_INFO_FMT "Wait for FW to go to the " |
635374e7 EM |
3521 | "READY state\n", ioc->name)); |
3522 | ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20, | |
3523 | sleep_flag); | |
3524 | if (ioc_state) { | |
3525 | printk(MPT2SAS_ERR_FMT "%s: failed going to ready state " | |
3526 | " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); | |
3527 | goto out; | |
3528 | } | |
3529 | ||
3530 | _base_restore_msix_table(ioc); | |
3531 | printk(MPT2SAS_INFO_FMT "diag reset: SUCCESS\n", ioc->name); | |
3532 | return 0; | |
3533 | ||
3534 | out: | |
3535 | printk(MPT2SAS_ERR_FMT "diag reset: FAILED\n", ioc->name); | |
3536 | return -EFAULT; | |
3537 | } | |
3538 | ||
3539 | /** | |
3540 | * _base_make_ioc_ready - put controller in READY state | |
3541 | * @ioc: per adapter object | |
3542 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
3543 | * @type: FORCE_BIG_HAMMER or SOFT_RESET | |
3544 | * | |
3545 | * Returns 0 for success, non-zero for failure. | |
3546 | */ | |
3547 | static int | |
3548 | _base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, | |
3549 | enum reset_type type) | |
3550 | { | |
3551 | u32 ioc_state; | |
d32a8c15 | 3552 | int rc; |
635374e7 | 3553 | |
eabb08ad | 3554 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
3555 | __func__)); |
3556 | ||
3cb5469a EM |
3557 | if (ioc->pci_error_recovery) |
3558 | return 0; | |
3559 | ||
635374e7 | 3560 | ioc_state = mpt2sas_base_get_iocstate(ioc, 0); |
eabb08ad | 3561 | dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: ioc_state(0x%08x)\n", |
635374e7 EM |
3562 | ioc->name, __func__, ioc_state)); |
3563 | ||
3564 | if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) | |
3565 | return 0; | |
3566 | ||
3567 | if (ioc_state & MPI2_DOORBELL_USED) { | |
eabb08ad | 3568 | dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell " |
635374e7 EM |
3569 | "active!\n", ioc->name)); |
3570 | goto issue_diag_reset; | |
3571 | } | |
3572 | ||
3573 | if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { | |
3574 | mpt2sas_base_fault_info(ioc, ioc_state & | |
3575 | MPI2_DOORBELL_DATA_MASK); | |
3576 | goto issue_diag_reset; | |
3577 | } | |
3578 | ||
3579 | if (type == FORCE_BIG_HAMMER) | |
3580 | goto issue_diag_reset; | |
3581 | ||
3582 | if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL) | |
3583 | if (!(_base_send_ioc_reset(ioc, | |
d32a8c15 KD |
3584 | MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) { |
3585 | ioc->ioc_reset_count++; | |
635374e7 | 3586 | return 0; |
d32a8c15 | 3587 | } |
635374e7 EM |
3588 | |
3589 | issue_diag_reset: | |
d32a8c15 KD |
3590 | rc = _base_diag_reset(ioc, CAN_SLEEP); |
3591 | ioc->ioc_reset_count++; | |
3592 | return rc; | |
635374e7 EM |
3593 | } |
3594 | ||
3595 | /** | |
3596 | * _base_make_ioc_operational - put controller in OPERATIONAL state | |
3597 | * @ioc: per adapter object | |
635374e7 EM |
3598 | * @sleep_flag: CAN_SLEEP or NO_SLEEP |
3599 | * | |
3600 | * Returns 0 for success, non-zero for failure. | |
3601 | */ | |
3602 | static int | |
7b936b02 | 3603 | _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) |
635374e7 EM |
3604 | { |
3605 | int r, i; | |
3606 | unsigned long flags; | |
3607 | u32 reply_address; | |
595bb0bd | 3608 | u16 smid; |
77e63ed4 | 3609 | struct _tr_list *delayed_tr, *delayed_tr_next; |
635374e7 | 3610 | |
eabb08ad | 3611 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
3612 | __func__)); |
3613 | ||
77e63ed4 KD |
3614 | /* clean the delayed target reset list */ |
3615 | list_for_each_entry_safe(delayed_tr, delayed_tr_next, | |
3616 | &ioc->delayed_tr_list, list) { | |
3617 | list_del(&delayed_tr->list); | |
3618 | kfree(delayed_tr); | |
3619 | } | |
3620 | ||
f3eedd69 KD |
3621 | list_for_each_entry_safe(delayed_tr, delayed_tr_next, |
3622 | &ioc->delayed_tr_volume_list, list) { | |
3623 | list_del(&delayed_tr->list); | |
3624 | kfree(delayed_tr); | |
3625 | } | |
3626 | ||
635374e7 EM |
3627 | /* initialize the scsi lookup free list */ |
3628 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); | |
3629 | INIT_LIST_HEAD(&ioc->free_list); | |
595bb0bd KD |
3630 | smid = 1; |
3631 | for (i = 0; i < ioc->scsiio_depth; i++, smid++) { | |
35f805b5 | 3632 | INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list); |
635374e7 | 3633 | ioc->scsi_lookup[i].cb_idx = 0xFF; |
595bb0bd KD |
3634 | ioc->scsi_lookup[i].smid = smid; |
3635 | ioc->scsi_lookup[i].scmd = NULL; | |
635374e7 EM |
3636 | list_add_tail(&ioc->scsi_lookup[i].tracker_list, |
3637 | &ioc->free_list); | |
3638 | } | |
595bb0bd KD |
3639 | |
3640 | /* hi-priority queue */ | |
3641 | INIT_LIST_HEAD(&ioc->hpr_free_list); | |
3642 | smid = ioc->hi_priority_smid; | |
3643 | for (i = 0; i < ioc->hi_priority_depth; i++, smid++) { | |
3644 | ioc->hpr_lookup[i].cb_idx = 0xFF; | |
3645 | ioc->hpr_lookup[i].smid = smid; | |
3646 | list_add_tail(&ioc->hpr_lookup[i].tracker_list, | |
3647 | &ioc->hpr_free_list); | |
3648 | } | |
3649 | ||
3650 | /* internal queue */ | |
3651 | INIT_LIST_HEAD(&ioc->internal_free_list); | |
3652 | smid = ioc->internal_smid; | |
3653 | for (i = 0; i < ioc->internal_depth; i++, smid++) { | |
3654 | ioc->internal_lookup[i].cb_idx = 0xFF; | |
3655 | ioc->internal_lookup[i].smid = smid; | |
3656 | list_add_tail(&ioc->internal_lookup[i].tracker_list, | |
3657 | &ioc->internal_free_list); | |
3658 | } | |
35f805b5 KD |
3659 | |
3660 | /* chain pool */ | |
3661 | INIT_LIST_HEAD(&ioc->free_chain_list); | |
3662 | for (i = 0; i < ioc->chain_depth; i++) | |
3663 | list_add_tail(&ioc->chain_lookup[i].tracker_list, | |
3664 | &ioc->free_chain_list); | |
3665 | ||
635374e7 EM |
3666 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
3667 | ||
3668 | /* initialize Reply Free Queue */ | |
3669 | for (i = 0, reply_address = (u32)ioc->reply_dma ; | |
3670 | i < ioc->reply_free_queue_depth ; i++, reply_address += | |
3671 | ioc->reply_sz) | |
3672 | ioc->reply_free[i] = cpu_to_le32(reply_address); | |
3673 | ||
3674 | /* initialize Reply Post Free Queue */ | |
3675 | for (i = 0; i < ioc->reply_post_queue_depth; i++) | |
03ea1115 | 3676 | ioc->reply_post_free[i].Words = ULLONG_MAX; |
635374e7 | 3677 | |
7b936b02 | 3678 | r = _base_send_ioc_init(ioc, sleep_flag); |
635374e7 EM |
3679 | if (r) |
3680 | return r; | |
3681 | ||
3682 | /* initialize the index's */ | |
3683 | ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1; | |
3684 | ioc->reply_post_host_index = 0; | |
3685 | writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex); | |
3686 | writel(0, &ioc->chip->ReplyPostHostIndex); | |
3687 | ||
3688 | _base_unmask_interrupts(ioc); | |
7b936b02 | 3689 | r = _base_event_notification(ioc, sleep_flag); |
635374e7 EM |
3690 | if (r) |
3691 | return r; | |
3692 | ||
3693 | if (sleep_flag == CAN_SLEEP) | |
3694 | _base_static_config_pages(ioc); | |
3695 | ||
570c67ac KD |
3696 | if (ioc->wait_for_port_enable_to_complete) { |
3697 | if (diag_buffer_enable != 0) | |
3698 | mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable); | |
3699 | if (disable_discovery > 0) | |
3700 | return r; | |
3701 | } | |
dd5fd332 | 3702 | |
7b936b02 | 3703 | r = _base_send_port_enable(ioc, sleep_flag); |
635374e7 EM |
3704 | if (r) |
3705 | return r; | |
3706 | ||
3707 | return r; | |
3708 | } | |
3709 | ||
3710 | /** | |
3711 | * mpt2sas_base_free_resources - free resources controller resources (io/irq/memap) | |
3712 | * @ioc: per adapter object | |
3713 | * | |
3714 | * Return nothing. | |
3715 | */ | |
3716 | void | |
3717 | mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc) | |
3718 | { | |
3719 | struct pci_dev *pdev = ioc->pdev; | |
3720 | ||
eabb08ad | 3721 | dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
3722 | __func__)); |
3723 | ||
3724 | _base_mask_interrupts(ioc); | |
6558bbb1 | 3725 | ioc->shost_recovery = 1; |
635374e7 | 3726 | _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); |
6558bbb1 | 3727 | ioc->shost_recovery = 0; |
635374e7 EM |
3728 | if (ioc->pci_irq) { |
3729 | synchronize_irq(pdev->irq); | |
3730 | free_irq(ioc->pci_irq, ioc); | |
3731 | } | |
3732 | _base_disable_msix(ioc); | |
3733 | if (ioc->chip_phys) | |
3734 | iounmap(ioc->chip); | |
3735 | ioc->pci_irq = -1; | |
3736 | ioc->chip_phys = 0; | |
3737 | pci_release_selected_regions(ioc->pdev, ioc->bars); | |
ef7c80c1 | 3738 | pci_disable_pcie_error_reporting(pdev); |
635374e7 | 3739 | pci_disable_device(pdev); |
635374e7 EM |
3740 | return; |
3741 | } | |
3742 | ||
3743 | /** | |
3744 | * mpt2sas_base_attach - attach controller instance | |
3745 | * @ioc: per adapter object | |
3746 | * | |
3747 | * Returns 0 for success, non-zero for failure. | |
3748 | */ | |
3749 | int | |
3750 | mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) | |
3751 | { | |
3752 | int r, i; | |
635374e7 | 3753 | |
eabb08ad | 3754 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
3755 | __func__)); |
3756 | ||
3757 | r = mpt2sas_base_map_resources(ioc); | |
3758 | if (r) | |
3759 | return r; | |
3760 | ||
fcfe6392 | 3761 | pci_set_drvdata(ioc->pdev, ioc->shost); |
96b681c6 | 3762 | r = _base_get_ioc_facts(ioc, CAN_SLEEP); |
635374e7 EM |
3763 | if (r) |
3764 | goto out_free_resources; | |
3765 | ||
96b681c6 | 3766 | r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); |
635374e7 EM |
3767 | if (r) |
3768 | goto out_free_resources; | |
3769 | ||
595bb0bd KD |
3770 | ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts, |
3771 | sizeof(Mpi2PortFactsReply_t), GFP_KERNEL); | |
f6aee7b9 KD |
3772 | if (!ioc->pfacts) { |
3773 | r = -ENOMEM; | |
595bb0bd | 3774 | goto out_free_resources; |
f6aee7b9 | 3775 | } |
595bb0bd KD |
3776 | |
3777 | for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) { | |
3778 | r = _base_get_port_facts(ioc, i, CAN_SLEEP); | |
3779 | if (r) | |
3780 | goto out_free_resources; | |
3781 | } | |
3782 | ||
635374e7 EM |
3783 | r = _base_allocate_memory_pools(ioc, CAN_SLEEP); |
3784 | if (r) | |
3785 | goto out_free_resources; | |
3786 | ||
3787 | init_waitqueue_head(&ioc->reset_wq); | |
3788 | ||
f3eedd69 KD |
3789 | /* allocate memory pd handle bitmask list */ |
3790 | ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8); | |
3791 | if (ioc->facts.MaxDevHandle % 8) | |
3792 | ioc->pd_handles_sz++; | |
3793 | ioc->pd_handles = kzalloc(ioc->pd_handles_sz, | |
3794 | GFP_KERNEL); | |
3e2e833a KD |
3795 | if (!ioc->pd_handles) { |
3796 | r = -ENOMEM; | |
f3eedd69 | 3797 | goto out_free_resources; |
3e2e833a | 3798 | } |
f3eedd69 | 3799 | |
e75b9b6d KD |
3800 | ioc->fwfault_debug = mpt2sas_fwfault_debug; |
3801 | ||
635374e7 EM |
3802 | /* base internal command bits */ |
3803 | mutex_init(&ioc->base_cmds.mutex); | |
635374e7 EM |
3804 | ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
3805 | ioc->base_cmds.status = MPT2_CMD_NOT_USED; | |
3806 | ||
3807 | /* transport internal command bits */ | |
3808 | ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); | |
3809 | ioc->transport_cmds.status = MPT2_CMD_NOT_USED; | |
3810 | mutex_init(&ioc->transport_cmds.mutex); | |
635374e7 | 3811 | |
d685c262 KD |
3812 | /* scsih internal command bits */ |
3813 | ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); | |
3814 | ioc->scsih_cmds.status = MPT2_CMD_NOT_USED; | |
3815 | mutex_init(&ioc->scsih_cmds.mutex); | |
3816 | ||
635374e7 EM |
3817 | /* task management internal command bits */ |
3818 | ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); | |
3819 | ioc->tm_cmds.status = MPT2_CMD_NOT_USED; | |
3820 | mutex_init(&ioc->tm_cmds.mutex); | |
635374e7 EM |
3821 | |
3822 | /* config page internal command bits */ | |
3823 | ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); | |
3824 | ioc->config_cmds.status = MPT2_CMD_NOT_USED; | |
3825 | mutex_init(&ioc->config_cmds.mutex); | |
635374e7 EM |
3826 | |
3827 | /* ctl module internal command bits */ | |
3828 | ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); | |
769578ff | 3829 | ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); |
635374e7 EM |
3830 | ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; |
3831 | mutex_init(&ioc->ctl_cmds.mutex); | |
635374e7 | 3832 | |
f6aee7b9 KD |
3833 | if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply || |
3834 | !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply || | |
769578ff KD |
3835 | !ioc->config_cmds.reply || !ioc->ctl_cmds.reply || |
3836 | !ioc->ctl_cmds.sense) { | |
f6aee7b9 KD |
3837 | r = -ENOMEM; |
3838 | goto out_free_resources; | |
3839 | } | |
3840 | ||
3e2e833a KD |
3841 | if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply || |
3842 | !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply || | |
3843 | !ioc->config_cmds.reply || !ioc->ctl_cmds.reply) { | |
3844 | r = -ENOMEM; | |
3845 | goto out_free_resources; | |
3846 | } | |
3847 | ||
f1c35e6a KD |
3848 | init_completion(&ioc->shost_recovery_done); |
3849 | ||
635374e7 EM |
3850 | for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) |
3851 | ioc->event_masks[i] = -1; | |
3852 | ||
3853 | /* here we enable the events we care about */ | |
3854 | _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY); | |
3855 | _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE); | |
3856 | _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST); | |
3857 | _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); | |
3858 | _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE); | |
3859 | _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST); | |
3860 | _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME); | |
3861 | _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK); | |
3862 | _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS); | |
635374e7 | 3863 | _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED); |
7b936b02 | 3864 | r = _base_make_ioc_operational(ioc, CAN_SLEEP); |
635374e7 EM |
3865 | if (r) |
3866 | goto out_free_resources; | |
3867 | ||
6cb8ef57 KD |
3868 | if (missing_delay[0] != -1 && missing_delay[1] != -1) |
3869 | _base_update_missing_delay(ioc, missing_delay[0], | |
3870 | missing_delay[1]); | |
3871 | ||
e4750c98 | 3872 | mpt2sas_base_start_watchdog(ioc); |
635374e7 EM |
3873 | return 0; |
3874 | ||
3875 | out_free_resources: | |
3876 | ||
3877 | ioc->remove_host = 1; | |
3878 | mpt2sas_base_free_resources(ioc); | |
3879 | _base_release_memory_pools(ioc); | |
fcfe6392 | 3880 | pci_set_drvdata(ioc->pdev, NULL); |
f3eedd69 | 3881 | kfree(ioc->pd_handles); |
635374e7 EM |
3882 | kfree(ioc->tm_cmds.reply); |
3883 | kfree(ioc->transport_cmds.reply); | |
e94f6747 | 3884 | kfree(ioc->scsih_cmds.reply); |
635374e7 EM |
3885 | kfree(ioc->config_cmds.reply); |
3886 | kfree(ioc->base_cmds.reply); | |
3887 | kfree(ioc->ctl_cmds.reply); | |
769578ff | 3888 | kfree(ioc->ctl_cmds.sense); |
635374e7 EM |
3889 | kfree(ioc->pfacts); |
3890 | ioc->ctl_cmds.reply = NULL; | |
3891 | ioc->base_cmds.reply = NULL; | |
3892 | ioc->tm_cmds.reply = NULL; | |
e94f6747 | 3893 | ioc->scsih_cmds.reply = NULL; |
635374e7 EM |
3894 | ioc->transport_cmds.reply = NULL; |
3895 | ioc->config_cmds.reply = NULL; | |
3896 | ioc->pfacts = NULL; | |
3897 | return r; | |
3898 | } | |
3899 | ||
3900 | ||
3901 | /** | |
3902 | * mpt2sas_base_detach - remove controller instance | |
3903 | * @ioc: per adapter object | |
3904 | * | |
3905 | * Return nothing. | |
3906 | */ | |
3907 | void | |
3908 | mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc) | |
3909 | { | |
635374e7 | 3910 | |
eabb08ad | 3911 | dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, |
635374e7 EM |
3912 | __func__)); |
3913 | ||
e4750c98 | 3914 | mpt2sas_base_stop_watchdog(ioc); |
635374e7 EM |
3915 | mpt2sas_base_free_resources(ioc); |
3916 | _base_release_memory_pools(ioc); | |
fcfe6392 | 3917 | pci_set_drvdata(ioc->pdev, NULL); |
f3eedd69 | 3918 | kfree(ioc->pd_handles); |
635374e7 EM |
3919 | kfree(ioc->pfacts); |
3920 | kfree(ioc->ctl_cmds.reply); | |
769578ff | 3921 | kfree(ioc->ctl_cmds.sense); |
635374e7 EM |
3922 | kfree(ioc->base_cmds.reply); |
3923 | kfree(ioc->tm_cmds.reply); | |
3924 | kfree(ioc->transport_cmds.reply); | |
e94f6747 | 3925 | kfree(ioc->scsih_cmds.reply); |
635374e7 EM |
3926 | kfree(ioc->config_cmds.reply); |
3927 | } | |
3928 | ||
3929 | /** | |
3930 | * _base_reset_handler - reset callback handler (for base) | |
3931 | * @ioc: per adapter object | |
3932 | * @reset_phase: phase | |
3933 | * | |
3934 | * The handler for doing any required cleanup or initialization. | |
3935 | * | |
3936 | * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, | |
3937 | * MPT2_IOC_DONE_RESET | |
3938 | * | |
3939 | * Return nothing. | |
3940 | */ | |
3941 | static void | |
3942 | _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) | |
3943 | { | |
3944 | switch (reset_phase) { | |
3945 | case MPT2_IOC_PRE_RESET: | |
eabb08ad | 3946 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
635374e7 EM |
3947 | "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); |
3948 | break; | |
3949 | case MPT2_IOC_AFTER_RESET: | |
eabb08ad | 3950 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
635374e7 EM |
3951 | "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); |
3952 | if (ioc->transport_cmds.status & MPT2_CMD_PENDING) { | |
3953 | ioc->transport_cmds.status |= MPT2_CMD_RESET; | |
3954 | mpt2sas_base_free_smid(ioc, ioc->transport_cmds.smid); | |
3955 | complete(&ioc->transport_cmds.done); | |
3956 | } | |
3957 | if (ioc->base_cmds.status & MPT2_CMD_PENDING) { | |
3958 | ioc->base_cmds.status |= MPT2_CMD_RESET; | |
3959 | mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid); | |
3960 | complete(&ioc->base_cmds.done); | |
3961 | } | |
3962 | if (ioc->config_cmds.status & MPT2_CMD_PENDING) { | |
3963 | ioc->config_cmds.status |= MPT2_CMD_RESET; | |
3964 | mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid); | |
4be929be | 3965 | ioc->config_cmds.smid = USHRT_MAX; |
635374e7 EM |
3966 | complete(&ioc->config_cmds.done); |
3967 | } | |
3968 | break; | |
3969 | case MPT2_IOC_DONE_RESET: | |
eabb08ad | 3970 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
635374e7 EM |
3971 | "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); |
3972 | break; | |
3973 | } | |
3974 | mpt2sas_scsih_reset_handler(ioc, reset_phase); | |
3975 | mpt2sas_ctl_reset_handler(ioc, reset_phase); | |
3976 | } | |
3977 | ||
3978 | /** | |
3979 | * _wait_for_commands_to_complete - reset controller | |
3980 | * @ioc: Pointer to MPT_ADAPTER structure | |
3981 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
3982 | * | |
3983 | * This function waiting(3s) for all pending commands to complete | |
3984 | * prior to putting controller in reset. | |
3985 | */ | |
3986 | static void | |
3987 | _wait_for_commands_to_complete(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) | |
3988 | { | |
3989 | u32 ioc_state; | |
3990 | unsigned long flags; | |
3991 | u16 i; | |
3992 | ||
3993 | ioc->pending_io_count = 0; | |
3994 | if (sleep_flag != CAN_SLEEP) | |
3995 | return; | |
3996 | ||
3997 | ioc_state = mpt2sas_base_get_iocstate(ioc, 0); | |
3998 | if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) | |
3999 | return; | |
4000 | ||
4001 | /* pending command count */ | |
4002 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); | |
595bb0bd | 4003 | for (i = 0; i < ioc->scsiio_depth; i++) |
635374e7 EM |
4004 | if (ioc->scsi_lookup[i].cb_idx != 0xFF) |
4005 | ioc->pending_io_count++; | |
4006 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
4007 | ||
4008 | if (!ioc->pending_io_count) | |
4009 | return; | |
4010 | ||
4011 | /* wait for pending commands to complete */ | |
d274213a | 4012 | wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ); |
635374e7 EM |
4013 | } |
4014 | ||
4015 | /** | |
4016 | * mpt2sas_base_hard_reset_handler - reset controller | |
4017 | * @ioc: Pointer to MPT_ADAPTER structure | |
4018 | * @sleep_flag: CAN_SLEEP or NO_SLEEP | |
4019 | * @type: FORCE_BIG_HAMMER or SOFT_RESET | |
4020 | * | |
4021 | * Returns 0 for success, non-zero for failure. | |
4022 | */ | |
4023 | int | |
4024 | mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, | |
4025 | enum reset_type type) | |
4026 | { | |
7b936b02 | 4027 | int r; |
635374e7 EM |
4028 | unsigned long flags; |
4029 | ||
eabb08ad | 4030 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, |
635374e7 EM |
4031 | __func__)); |
4032 | ||
3cb5469a EM |
4033 | if (ioc->pci_error_recovery) { |
4034 | printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n", | |
4035 | ioc->name, __func__); | |
4036 | r = 0; | |
4037 | goto out; | |
4038 | } | |
4039 | ||
fa7f3167 KD |
4040 | if (mpt2sas_fwfault_debug) |
4041 | mpt2sas_halt_firmware(ioc); | |
4042 | ||
d274213a KD |
4043 | /* TODO - What we really should be doing is pulling |
4044 | * out all the code associated with NO_SLEEP; its never used. | |
4045 | * That is legacy code from mpt fusion driver, ported over. | |
4046 | * I will leave this BUG_ON here for now till its been resolved. | |
4047 | */ | |
4048 | BUG_ON(sleep_flag == NO_SLEEP); | |
4049 | ||
4050 | /* wait for an active reset in progress to complete */ | |
4051 | if (!mutex_trylock(&ioc->reset_in_progress_mutex)) { | |
4052 | do { | |
4053 | ssleep(1); | |
4054 | } while (ioc->shost_recovery == 1); | |
eabb08ad | 4055 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name, |
d274213a KD |
4056 | __func__)); |
4057 | return ioc->ioc_reset_in_progress_status; | |
635374e7 | 4058 | } |
d274213a KD |
4059 | |
4060 | spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); | |
635374e7 | 4061 | ioc->shost_recovery = 1; |
635374e7 EM |
4062 | spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
4063 | ||
4064 | _base_reset_handler(ioc, MPT2_IOC_PRE_RESET); | |
4065 | _wait_for_commands_to_complete(ioc, sleep_flag); | |
4066 | _base_mask_interrupts(ioc); | |
4067 | r = _base_make_ioc_ready(ioc, sleep_flag, type); | |
4068 | if (r) | |
4069 | goto out; | |
4070 | _base_reset_handler(ioc, MPT2_IOC_AFTER_RESET); | |
7b936b02 | 4071 | r = _base_make_ioc_operational(ioc, sleep_flag); |
635374e7 EM |
4072 | if (!r) |
4073 | _base_reset_handler(ioc, MPT2_IOC_DONE_RESET); | |
4074 | out: | |
eabb08ad | 4075 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %s\n", |
635374e7 EM |
4076 | ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED"))); |
4077 | ||
4078 | spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); | |
d274213a | 4079 | ioc->ioc_reset_in_progress_status = r; |
155dd4c7 | 4080 | ioc->shost_recovery = 0; |
f1c35e6a | 4081 | complete(&ioc->shost_recovery_done); |
635374e7 | 4082 | spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
d274213a | 4083 | mutex_unlock(&ioc->reset_in_progress_mutex); |
cd4e12e8 | 4084 | |
eabb08ad | 4085 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name, |
d274213a | 4086 | __func__)); |
635374e7 EM |
4087 | return r; |
4088 | } |