[GitHub/exynos8895/android_kernel_samsung_universal8895.git] / drivers / scsi / device_handler / scsi_dh_emc.c

/*
 * Target driver for EMC CLARiiON AX/CX-series hardware.
 * Based on code from Lars Marowsky-Bree <lmb@suse.de>
 * and Ed Goggin <egoggin@emc.com>.
 *
 * Copyright (C) 2006 Red Hat, Inc.  All rights reserved.
 * Copyright (C) 2006 Mike Christie
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, write to
 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 */
#include <linux/slab.h>
#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
#include <scsi/scsi_device.h>

#define CLARIION_NAME			"emc"

#define CLARIION_TRESPASS_PAGE		0x22
#define CLARIION_BUFFER_SIZE		0xFC
#define CLARIION_TIMEOUT		(60 * HZ)
#define CLARIION_RETRIES		3
#define CLARIION_UNBOUND_LU		-1
#define CLARIION_SP_A			0
#define CLARIION_SP_B			1

/* Flags */
#define CLARIION_SHORT_TRESPASS		1
#define CLARIION_HONOR_RESERVATIONS	2

/* LUN states */
#define CLARIION_LUN_UNINITIALIZED	-1
#define CLARIION_LUN_UNBOUND		0
#define CLARIION_LUN_BOUND		1
#define CLARIION_LUN_OWNED		2

static unsigned char long_trespass[] = {
	0, 0, 0, 0, 0, 0, 0, 0,
	CLARIION_TRESPASS_PAGE,	/* Page code */
	0x09,			/* Page length - 2 */
	0x01,			/* Trespass code */
	0xff, 0xff,		/* Trespass target */
	0, 0, 0, 0, 0, 0	/* Reserved bytes / unknown */
};

static unsigned char short_trespass[] = {
	0, 0, 0, 0,
	CLARIION_TRESPASS_PAGE,	/* Page code */
	0x02,			/* Page length - 2 */
	0x01,			/* Trespass code */
	0xff,			/* Trespass target */
};

static const char * lun_state[] =
{
    "not bound",
    "bound",
    "owned",
};

struct clariion_dh_data {
	/*
	 * Flags:
	 *  CLARIION_SHORT_TRESPASS
	 * Use short trespass command (FC-series) or the long version
	 * (default for AX/CX CLARiiON arrays).
	 *
	 *  CLARIION_HONOR_RESERVATIONS
	 * Whether or not (default) to honor SCSI reservations when
	 * initiating a switch-over.
	 */
	unsigned flags;
	/*
	 * I/O buffer for both MODE_SELECT and INQUIRY commands.
	 */
	unsigned char buffer[CLARIION_BUFFER_SIZE];
	/*
	 * SCSI sense buffer for commands -- assumes serial issuance
	 * and completion sequence of all commands for same multipath.
	 */
	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
	unsigned int senselen;
	/*
	 * LUN state
	 */
	int lun_state;
	/*
	 * SP Port number
	 */
	int port;
	/*
	 * which SP (A=0,B=1,UNBOUND=-1) is the default SP for this
	 * path's mapped LUN
	 */
	int default_sp;
	/*
	 * which SP (A=0,B=1,UNBOUND=-1) is the active SP for this
	 * path's mapped LUN
	 */
	int current_sp;
};

/*
 * Parse MODE_SELECT cmd reply.
 */
static int trespass_endio(struct scsi_device *sdev, char *sense)
{
	int err = SCSI_DH_IO;
	struct scsi_sense_hdr sshdr;

	if (!scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) {
		sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
			    "0x%2x, 0x%2x while sending CLARiiON trespass "
			    "command.\n", CLARIION_NAME, sshdr.sense_key,
			    sshdr.asc, sshdr.ascq);

		if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) &&
		     (sshdr.ascq == 0x00)) {
			/*
			 * Array based copy in progress -- do not send
			 * mode_select or copy will be aborted mid-stream.
			 */
			sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
				    "progress while sending CLARiiON trespass "
				    "command.\n", CLARIION_NAME);
			err = SCSI_DH_DEV_TEMP_BUSY;
		} else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) &&
			    (sshdr.ascq == 0x03)) {
			/*
			 * LUN Not Ready - Manual Intervention Required
			 * indicates in-progress ucode upgrade (NDU).
			 */
			sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
				    "ucode upgrade NDU operation while sending "
				    "CLARiiON trespass command.\n", CLARIION_NAME);
			err = SCSI_DH_DEV_TEMP_BUSY;
		} else
			err = SCSI_DH_DEV_FAILED;
	} else {
		sdev_printk(KERN_INFO, sdev,
			    "%s: failed to send MODE SELECT, no sense available\n",
			    CLARIION_NAME);
	}
	return err;
}

static int parse_sp_info_reply(struct scsi_device *sdev,
			       struct clariion_dh_data *csdev)
{
	int err = SCSI_DH_OK;

	/* check for in-progress ucode upgrade (NDU) */
	if (csdev->buffer[48] != 0) {
		sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "
			    "ucode upgrade NDU operation while finding "
			    "current active SP.", CLARIION_NAME);
		err = SCSI_DH_DEV_TEMP_BUSY;
		goto out;
	}
	if (csdev->buffer[4] > 2) {
		/* Invalid buffer format */
		sdev_printk(KERN_NOTICE, sdev,
			    "%s: invalid VPD page 0xC0 format\n",
			    CLARIION_NAME);
		err = SCSI_DH_NOSYS;
		goto out;
	}
	switch (csdev->buffer[28] & 0x0f) {
	case 6:
		sdev_printk(KERN_NOTICE, sdev,
			    "%s: ALUA failover mode detected\n",
			    CLARIION_NAME);
		break;
	case 4:
		/* Linux failover */
		break;
	default:
		sdev_printk(KERN_WARNING, sdev,
			    "%s: Invalid failover mode %d\n",
			    CLARIION_NAME, csdev->buffer[28] & 0x0f);
		err = SCSI_DH_NOSYS;
		goto out;
	}

	csdev->default_sp = csdev->buffer[5];
	csdev->lun_state = csdev->buffer[4];
	csdev->current_sp = csdev->buffer[8];
	csdev->port = csdev->buffer[7];

out:
	return err;
}

#define emc_default_str "FC (Legacy)"

static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer)
{
	unsigned char len = buffer[4] + 5;
	char *sp_model = NULL;
	unsigned char sp_len, serial_len;

	if (len < 160) {
		sdev_printk(KERN_WARNING, sdev,
			    "%s: Invalid information section length %d\n",
			    CLARIION_NAME, len);
		/* Check for old FC arrays */
		if (!strncmp(buffer + 8, "DGC", 3)) {
			/* Old FC array, not supporting extended information */
			sp_model = emc_default_str;
		}
		goto out;
	}

	/*
	 * Parse extended information for SP model number
	 */
	serial_len = buffer[160];
	if (serial_len == 0 || serial_len + 161 > len) {
		sdev_printk(KERN_WARNING, sdev,
			    "%s: Invalid array serial number length %d\n",
			    CLARIION_NAME, serial_len);
		goto out;
	}
	sp_len = buffer[99];
	if (sp_len == 0 || serial_len + sp_len + 161 > len) {
		sdev_printk(KERN_WARNING, sdev,
			    "%s: Invalid model number length %d\n",
			    CLARIION_NAME, sp_len);
		goto out;
	}
	sp_model = &buffer[serial_len + 161];
	/* Strip whitespace at the end */
	while (sp_len > 1 && sp_model[sp_len - 1] == ' ')
		sp_len--;

	sp_model[sp_len] = '\0';

out:
	return sp_model;
}

/*
 * Get block request for REQ_BLOCK_PC command issued to path.  Currently
 * limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
 *
 * Uses data and sense buffers in hardware handler context structure and
 * assumes serial servicing of commands, both issuance and completion.
 */
static struct request *get_req(struct scsi_device *sdev, int cmd,
				unsigned char *buffer)
{
	struct request *rq;
	int len = 0;

	rq = blk_get_request(sdev->request_queue,
			(cmd != INQUIRY) ? WRITE : READ, GFP_NOIO);
	if (IS_ERR(rq)) {
		sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed");
		return NULL;
	}

	blk_rq_set_block_pc(rq);
	rq->cmd_len = COMMAND_SIZE(cmd);
	rq->cmd[0] = cmd;

	switch (cmd) {
	case MODE_SELECT:
		len = sizeof(short_trespass);
		rq->cmd[1] = 0x10;
		rq->cmd[4] = len;
		break;
	case MODE_SELECT_10:
		len = sizeof(long_trespass);
		rq->cmd[1] = 0x10;
		rq->cmd[8] = len;
		break;
	case INQUIRY:
		len = CLARIION_BUFFER_SIZE;
		rq->cmd[4] = len;
		memset(buffer, 0, len);
		break;
	default:
		BUG_ON(1);
		break;
	}

	rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
			 REQ_FAILFAST_DRIVER;
	rq->timeout = CLARIION_TIMEOUT;
	rq->retries = CLARIION_RETRIES;

	if (blk_rq_map_kern(rq->q, rq, buffer, len, GFP_NOIO)) {
		blk_put_request(rq);
		return NULL;
	}

	return rq;
}

static int send_inquiry_cmd(struct scsi_device *sdev, int page,
			    struct clariion_dh_data *csdev)
{
	struct request *rq = get_req(sdev, INQUIRY, csdev->buffer);
	int err;

	if (!rq)
		return SCSI_DH_RES_TEMP_UNAVAIL;

	rq->sense = csdev->sense;
	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
	rq->sense_len = csdev->senselen = 0;

	rq->cmd[0] = INQUIRY;
	if (page != 0) {
		rq->cmd[1] = 1;
		rq->cmd[2] = page;
	}
	err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
	if (err == -EIO) {
		sdev_printk(KERN_INFO, sdev,
			    "%s: failed to send %s INQUIRY: %x\n",
			    CLARIION_NAME, page?"EVPD":"standard",
			    rq->errors);
		csdev->senselen = rq->sense_len;
		err = SCSI_DH_IO;
	}

	blk_put_request(rq);

	return err;
}

static int send_trespass_cmd(struct scsi_device *sdev,
			    struct clariion_dh_data *csdev)
{
	struct request *rq;
	unsigned char *page22;
	int err, len, cmd;

	if (csdev->flags & CLARIION_SHORT_TRESPASS) {
		page22 = short_trespass;
		if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
			/* Set Honor Reservations bit */
			page22[6] |= 0x80;
		len = sizeof(short_trespass);
		cmd = MODE_SELECT;
	} else {
		page22 = long_trespass;
		if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
			/* Set Honor Reservations bit */
			page22[10] |= 0x80;
		len = sizeof(long_trespass);
		cmd = MODE_SELECT_10;
	}
	BUG_ON((len > CLARIION_BUFFER_SIZE));
	memcpy(csdev->buffer, page22, len);

	rq = get_req(sdev, cmd, csdev->buffer);
	if (!rq)
		return SCSI_DH_RES_TEMP_UNAVAIL;

	rq->sense = csdev->sense;
	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
	rq->sense_len = csdev->senselen = 0;

	err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
	if (err == -EIO) {
		if (rq->sense_len) {
			err = trespass_endio(sdev, csdev->sense);
		} else {
			sdev_printk(KERN_INFO, sdev,
				    "%s: failed to send MODE SELECT: %x\n",
				    CLARIION_NAME, rq->errors);
		}
	}

	blk_put_request(rq);

	return err;
}

static int clariion_check_sense(struct scsi_device *sdev,
				struct scsi_sense_hdr *sense_hdr)
{
	switch (sense_hdr->sense_key) {
	case NOT_READY:
		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03)
			/*
			 * LUN Not Ready - Manual Intervention Required
			 * indicates this is a passive path.
			 *
			 * FIXME: However, if this is seen and EVPD C0
			 * indicates that this is due to a NDU in
			 * progress, we should set FAIL_PATH too.
			 * This indicates we might have to do a SCSI
			 * inquiry in the end_io path. Ugh.
			 *
			 * Can return FAILED only when we want the error
			 * recovery process to kick in.
			 */
			return SUCCESS;
		break;
	case ILLEGAL_REQUEST:
		if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01)
			/*
			 * An array based copy is in progress. Do not
			 * fail the path, do not bypass to another PG,
			 * do not retry. Fail the IO immediately.
			 * (Actually this is the same conclusion as in
			 * the default handler, but lets make sure.)
			 *
			 * Can return FAILED only when we want the error
			 * recovery process to kick in.
			 */
			return SUCCESS;
		break;
	case UNIT_ATTENTION:
		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
			/*
			 * Unit Attention Code. This is the first IO
			 * to the new path, so just retry.
			 */
			return ADD_TO_MLQUEUE;
		break;
	}

	return SCSI_RETURN_NOT_HANDLED;
}

static int clariion_prep_fn(struct scsi_device *sdev, struct request *req)
{
	struct clariion_dh_data *h = sdev->handler_data;
	int ret = BLKPREP_OK;

	if (h->lun_state != CLARIION_LUN_OWNED) {
		ret = BLKPREP_KILL;
		req->cmd_flags |= REQ_QUIET;
	}
	return ret;

}

static int clariion_std_inquiry(struct scsi_device *sdev,
				struct clariion_dh_data *csdev)
{
	int err = SCSI_DH_OK;
	char *sp_model;

	err = send_inquiry_cmd(sdev, 0, csdev);
	if (err != SCSI_DH_OK && csdev->senselen) {
		struct scsi_sense_hdr sshdr;

		if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
					 &sshdr)) {
			sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
				    "%02x/%02x/%02x\n", CLARIION_NAME,
				    sshdr.sense_key, sshdr.asc, sshdr.ascq);
		}
		err = SCSI_DH_IO;
		goto out;
	}

	sp_model = parse_sp_model(sdev, csdev->buffer);
	if (!sp_model) {
		err = SCSI_DH_DEV_UNSUPP;
		goto out;
	}

	/*
	 * FC Series arrays do not support long trespass
	 */
	if (!strlen(sp_model) || !strncmp(sp_model, "FC",2))
		csdev->flags |= CLARIION_SHORT_TRESPASS;

	sdev_printk(KERN_INFO, sdev,
		    "%s: detected Clariion %s, flags %x\n",
		    CLARIION_NAME, sp_model, csdev->flags);
out:
	return err;
}

static int clariion_send_inquiry(struct scsi_device *sdev,
				 struct clariion_dh_data *csdev)
{
	int err, retry = CLARIION_RETRIES;

retry:
	err = send_inquiry_cmd(sdev, 0xC0, csdev);
	if (err != SCSI_DH_OK && csdev->senselen) {
		struct scsi_sense_hdr sshdr;

		err = scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
					   &sshdr);
		if (!err)
			return SCSI_DH_IO;

		err = clariion_check_sense(sdev, &sshdr);
		if (retry > 0 && err == ADD_TO_MLQUEUE) {
			retry--;
			goto retry;
		}
		sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
			    "%02x/%02x/%02x\n", CLARIION_NAME,
			      sshdr.sense_key, sshdr.asc, sshdr.ascq);
		err = SCSI_DH_IO;
	} else {
		err = parse_sp_info_reply(sdev, csdev);
	}
	return err;
}

static int clariion_activate(struct scsi_device *sdev,
				activate_complete fn, void *data)
{
	struct clariion_dh_data *csdev = sdev->handler_data;
	int result;

	result = clariion_send_inquiry(sdev, csdev);
	if (result != SCSI_DH_OK)
		goto done;

	if (csdev->lun_state == CLARIION_LUN_OWNED)
		goto done;

	result = send_trespass_cmd(sdev, csdev);
	if (result != SCSI_DH_OK)
		goto done;
	sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n",
		    CLARIION_NAME,
		    csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" );

	/* Update status */
	result = clariion_send_inquiry(sdev, csdev);
	if (result != SCSI_DH_OK)
		goto done;

done:
	sdev_printk(KERN_INFO, sdev,
		    "%s: at SP %c Port %d (%s, default SP %c)\n",
		    CLARIION_NAME, csdev->current_sp + 'A',
		    csdev->port, lun_state[csdev->lun_state],
		    csdev->default_sp + 'A');

	if (fn)
		fn(data, result);
	return 0;
}
/*
 * params - parameters in the following format
 *      "no_of_params\0param1\0param2\0param3\0...\0"
 *      for example, string for 2 parameters with value 10 and 21
 *      is specified as "2\010\021\0".
 */
static int clariion_set_params(struct scsi_device *sdev, const char *params)
{
	struct clariion_dh_data *csdev = sdev->handler_data;
	unsigned int hr = 0, st = 0, argc;
	const char *p = params;
	int result = SCSI_DH_OK;

	if ((sscanf(params, "%u", &argc) != 1) || (argc != 2))
		return -EINVAL;

	while (*p++)
		;
	if ((sscanf(p, "%u", &st) != 1) || (st > 1))
		return -EINVAL;

	while (*p++)
		;
	if ((sscanf(p, "%u", &hr) != 1) || (hr > 1))
		return -EINVAL;

	if (st)
		csdev->flags |= CLARIION_SHORT_TRESPASS;
	else
		csdev->flags &= ~CLARIION_SHORT_TRESPASS;

	if (hr)
		csdev->flags |= CLARIION_HONOR_RESERVATIONS;
	else
		csdev->flags &= ~CLARIION_HONOR_RESERVATIONS;

	/*
	 * If this path is owned, we have to send a trespass command
	 * with the new parameters. If not, simply return. Next trespass
	 * command would use the parameters.
	 */
	if (csdev->lun_state != CLARIION_LUN_OWNED)
		goto done;

	csdev->lun_state = CLARIION_LUN_UNINITIALIZED;
	result = send_trespass_cmd(sdev, csdev);
	if (result != SCSI_DH_OK)
		goto done;

	/* Update status */
	result = clariion_send_inquiry(sdev, csdev);

done:
	return result;
}

static int clariion_bus_attach(struct scsi_device *sdev)
{
	struct clariion_dh_data *h;
	int err;

	h = kzalloc(sizeof(*h) , GFP_KERNEL);
	if (!h)
		return -ENOMEM;
	h->lun_state = CLARIION_LUN_UNINITIALIZED;
	h->default_sp = CLARIION_UNBOUND_LU;
	h->current_sp = CLARIION_UNBOUND_LU;

	err = clariion_std_inquiry(sdev, h);
	if (err != SCSI_DH_OK)
		goto failed;

	err = clariion_send_inquiry(sdev, h);
	if (err != SCSI_DH_OK)
		goto failed;

	sdev_printk(KERN_INFO, sdev,
		    "%s: connected to SP %c Port %d (%s, default SP %c)\n",
		    CLARIION_NAME, h->current_sp + 'A',
		    h->port, lun_state[h->lun_state],
		    h->default_sp + 'A');

	sdev->handler_data = h;
	return 0;

failed:
	kfree(h);
	return -EINVAL;
}

static void clariion_bus_detach(struct scsi_device *sdev)
{
	kfree(sdev->handler_data);
	sdev->handler_data = NULL;
}

static struct scsi_device_handler clariion_dh = {
	.name		= CLARIION_NAME,
	.module		= THIS_MODULE,
	.attach		= clariion_bus_attach,
	.detach		= clariion_bus_detach,
	.check_sense	= clariion_check_sense,
	.activate	= clariion_activate,
	.prep_fn	= clariion_prep_fn,
	.set_params	= clariion_set_params,
};

static int __init clariion_init(void)
{
	int r;

	r = scsi_register_device_handler(&clariion_dh);
	if (r != 0)
		printk(KERN_ERR "%s: Failed to register scsi device handler.",
			CLARIION_NAME);
	return r;
}

static void __exit clariion_exit(void)
{
	scsi_unregister_device_handler(&clariion_dh);
}

module_init(clariion_init);
module_exit(clariion_exit);

MODULE_DESCRIPTION("EMC CX/AX/FC-family driver");
MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, Chandra Seetharaman <sekharan@us.ibm.com>");
MODULE_LICENSE("GPL");
Commit	Line	Data
5e7dccad CS	1	/*
	2	* Target driver for EMC CLARiiON AX/CX-series hardware.
	3	* Based on code from Lars Marowsky-Bree <lmb@suse.de>
	4	* and Ed Goggin <egoggin@emc.com>.
	5	*
	6	* Copyright (C) 2006 Red Hat, Inc. All rights reserved.
	7	* Copyright (C) 2006 Mike Christie
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License as published by
	11	* the Free Software Foundation; either version 2, or (at your option)
	12	* any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with this program; see the file COPYING. If not, write to
	21	* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
	22	*/
5a0e3ad6	23	#include <linux/slab.h>
acf3368f	24	#include <linux/module.h>
5e7dccad CS	25	#include <scsi/scsi.h>
	26	#include <scsi/scsi_eh.h>
	27	#include <scsi/scsi_dh.h>
	28	#include <scsi/scsi_device.h>
	29
b6ff1b14	30	#define CLARIION_NAME "emc"
5e7dccad CS	31
5e7dccad CS	32	#define CLARIION_TRESPASS_PAGE 0x22
b6ff1b14	33	#define CLARIION_BUFFER_SIZE 0xFC
5e7dccad CS	34	#define CLARIION_TIMEOUT (60 * HZ)
	35	#define CLARIION_RETRIES 3
	36	#define CLARIION_UNBOUND_LU -1
b6ff1b14 HR	37	#define CLARIION_SP_A 0
b6ff1b14 HR	38	#define CLARIION_SP_B 1
5e7dccad	39
b6ff1b14 HR	40	/* Flags */
	41	#define CLARIION_SHORT_TRESPASS 1
	42	#define CLARIION_HONOR_RESERVATIONS 2
5e7dccad	43
b6ff1b14 HR	44	/* LUN states */
	45	#define CLARIION_LUN_UNINITIALIZED -1
	46	#define CLARIION_LUN_UNBOUND 0
	47	#define CLARIION_LUN_BOUND 1
	48	#define CLARIION_LUN_OWNED 2
	49
	50	static unsigned char long_trespass[] = {
	51	0, 0, 0, 0, 0, 0, 0, 0,
5e7dccad CS	52	CLARIION_TRESPASS_PAGE, /* Page code */
5e7dccad CS	53	0x09, /* Page length - 2 */
b6ff1b14	54	0x01, /* Trespass code */
5e7dccad CS	55	0xff, 0xff, /* Trespass target */
	56	0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */
	57	};
	58
	59	static unsigned char short_trespass[] = {
	60	0, 0, 0, 0,
	61	CLARIION_TRESPASS_PAGE, /* Page code */
	62	0x02, /* Page length - 2 */
b6ff1b14	63	0x01, /* Trespass code */
5e7dccad CS	64	0xff, /* Trespass target */
	65	};
	66
b6ff1b14 HR	67	static const char * lun_state[] =
	68	{
	69	"not bound",
	70	"bound",
	71	"owned",
5e7dccad CS	72	};
	73
	74	struct clariion_dh_data {
	75	/*
b6ff1b14 HR	76	* Flags:
b6ff1b14 HR	77	* CLARIION_SHORT_TRESPASS
5e7dccad CS	78	* Use short trespass command (FC-series) or the long version
5e7dccad CS	79	* (default for AX/CX CLARiiON arrays).
b6ff1b14 HR	80	*
b6ff1b14 HR	81	* CLARIION_HONOR_RESERVATIONS
5e7dccad CS	82	* Whether or not (default) to honor SCSI reservations when
	83	* initiating a switch-over.
	84	*/
b6ff1b14 HR	85	unsigned flags;
	86	/*
	87	* I/O buffer for both MODE_SELECT and INQUIRY commands.
	88	*/
7ae628d9	89	unsigned char buffer[CLARIION_BUFFER_SIZE];
5e7dccad CS	90	/*
	91	* SCSI sense buffer for commands -- assumes serial issuance
	92	* and completion sequence of all commands for same multipath.
	93	*/
	94	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
b6ff1b14 HR	95	unsigned int senselen;
	96	/*
	97	* LUN state
	98	*/
	99	int lun_state;
	100	/*
	101	* SP Port number
	102	*/
	103	int port;
	104	/*
	105	* which SP (A=0,B=1,UNBOUND=-1) is the default SP for this
	106	* path's mapped LUN
	107	*/
5e7dccad	108	int default_sp;
b6ff1b14 HR	109	/*
	110	* which SP (A=0,B=1,UNBOUND=-1) is the active SP for this
	111	* path's mapped LUN
	112	*/
5e7dccad CS	113	int current_sp;
	114	};
	115
5e7dccad CS	116	/*
	117	* Parse MODE_SELECT cmd reply.
	118	*/
b6ff1b14	119	static int trespass_endio(struct scsi_device sdev, char sense)
5e7dccad	120	{
b6ff1b14	121	int err = SCSI_DH_IO;
5e7dccad	122	struct scsi_sense_hdr sshdr;
5e7dccad	123
b6ff1b14 HR	124	if (!scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) {
b6ff1b14 HR	125	sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
5e7dccad	126	"0x%2x, 0x%2x while sending CLARiiON trespass "
b6ff1b14 HR	127	"command.\n", CLARIION_NAME, sshdr.sense_key,
b6ff1b14 HR	128	sshdr.asc, sshdr.ascq);
5e7dccad CS	129
	130	if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) &&
	131	(sshdr.ascq == 0x00)) {
	132	/*
	133	* Array based copy in progress -- do not send
	134	* mode_select or copy will be aborted mid-stream.
	135	*/
b6ff1b14	136	sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
5e7dccad	137	"progress while sending CLARiiON trespass "
b6ff1b14	138	"command.\n", CLARIION_NAME);
5e7dccad CS	139	err = SCSI_DH_DEV_TEMP_BUSY;
	140	} else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) &&
	141	(sshdr.ascq == 0x03)) {
	142	/*
	143	* LUN Not Ready - Manual Intervention Required
	144	* indicates in-progress ucode upgrade (NDU).
	145	*/
b6ff1b14	146	sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
5e7dccad	147	"ucode upgrade NDU operation while sending "
b6ff1b14	148	"CLARiiON trespass command.\n", CLARIION_NAME);
5e7dccad CS	149	err = SCSI_DH_DEV_TEMP_BUSY;
	150	} else
	151	err = SCSI_DH_DEV_FAILED;
b6ff1b14 HR	152	} else {
	153	sdev_printk(KERN_INFO, sdev,
	154	"%s: failed to send MODE SELECT, no sense available\n",
	155	CLARIION_NAME);
5e7dccad	156	}
5e7dccad CS	157	return err;
	158	}
	159
b6ff1b14 HR	160	static int parse_sp_info_reply(struct scsi_device *sdev,
b6ff1b14 HR	161	struct clariion_dh_data *csdev)
5e7dccad CS	162	{
5e7dccad CS	163	int err = SCSI_DH_OK;
5e7dccad	164
b6ff1b14 HR	165	/* check for in-progress ucode upgrade (NDU) */
	166	if (csdev->buffer[48] != 0) {
	167	sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "
	168	"ucode upgrade NDU operation while finding "
	169	"current active SP.", CLARIION_NAME);
	170	err = SCSI_DH_DEV_TEMP_BUSY;
	171	goto out;
	172	}
7ae628d9	173	if (csdev->buffer[4] > 2) {
b6ff1b14 HR	174	/* Invalid buffer format */
	175	sdev_printk(KERN_NOTICE, sdev,
	176	"%s: invalid VPD page 0xC0 format\n",
	177	CLARIION_NAME);
	178	err = SCSI_DH_NOSYS;
	179	goto out;
	180	}
	181	switch (csdev->buffer[28] & 0x0f) {
	182	case 6:
	183	sdev_printk(KERN_NOTICE, sdev,
	184	"%s: ALUA failover mode detected\n",
	185	CLARIION_NAME);
	186	break;
	187	case 4:
	188	/* Linux failover */
	189	break;
	190	default:
	191	sdev_printk(KERN_WARNING, sdev,
	192	"%s: Invalid failover mode %d\n",
	193	CLARIION_NAME, csdev->buffer[28] & 0x0f);
	194	err = SCSI_DH_NOSYS;
	195	goto out;
5e7dccad CS	196	}
5e7dccad CS	197
b6ff1b14 HR	198	csdev->default_sp = csdev->buffer[5];
	199	csdev->lun_state = csdev->buffer[4];
	200	csdev->current_sp = csdev->buffer[8];
	201	csdev->port = csdev->buffer[7];
	202
	203	out:
5e7dccad CS	204	return err;
	205	}
	206
b6ff1b14 HR	207	#define emc_default_str "FC (Legacy)"
	208
	209	static char * parse_sp_model(struct scsi_device sdev, unsigned char buffer)
5e7dccad	210	{
b6ff1b14 HR	211	unsigned char len = buffer[4] + 5;
	212	char *sp_model = NULL;
	213	unsigned char sp_len, serial_len;
	214
	215	if (len < 160) {
	216	sdev_printk(KERN_WARNING, sdev,
	217	"%s: Invalid information section length %d\n",
	218	CLARIION_NAME, len);
	219	/* Check for old FC arrays */
	220	if (!strncmp(buffer + 8, "DGC", 3)) {
	221	/* Old FC array, not supporting extended information */
	222	sp_model = emc_default_str;
	223	}
	224	goto out;
	225	}
5e7dccad	226
b6ff1b14 HR	227	/*
	228	* Parse extended information for SP model number
	229	*/
	230	serial_len = buffer[160];
	231	if (serial_len == 0 \|\| serial_len + 161 > len) {
	232	sdev_printk(KERN_WARNING, sdev,
	233	"%s: Invalid array serial number length %d\n",
	234	CLARIION_NAME, serial_len);
	235	goto out;
	236	}
	237	sp_len = buffer[99];
	238	if (sp_len == 0 \|\| serial_len + sp_len + 161 > len) {
	239	sdev_printk(KERN_WARNING, sdev,
	240	"%s: Invalid model number length %d\n",
	241	CLARIION_NAME, sp_len);
	242	goto out;
	243	}
	244	sp_model = &buffer[serial_len + 161];
	245	/* Strip whitespace at the end */
	246	while (sp_len > 1 && sp_model[sp_len - 1] == ' ')
	247	sp_len--;
5e7dccad	248
b6ff1b14	249	sp_model[sp_len] = '\0';
5e7dccad	250
b6ff1b14 HR	251	out:
b6ff1b14 HR	252	return sp_model;
5e7dccad CS	253	}
	254
	255	/*
765cbc6d HR	256	* Get block request for REQ_BLOCK_PC command issued to path. Currently
	257	* limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
	258	*
	259	* Uses data and sense buffers in hardware handler context structure and
	260	* assumes serial servicing of commands, both issuance and completion.
	261	*/
b6ff1b14 HR	262	static struct request get_req(struct scsi_device sdev, int cmd,
b6ff1b14 HR	263	unsigned char *buffer)
5e7dccad	264	{
5e7dccad	265	struct request *rq;
5e7dccad CS	266	int len = 0;
	267
	268	rq = blk_get_request(sdev->request_queue,
6c71dcb2	269	(cmd != INQUIRY) ? WRITE : READ, GFP_NOIO);
a492f075	270	if (IS_ERR(rq)) {
5e7dccad CS	271	sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed");
	272	return NULL;
	273	}
	274
f27b087b	275	blk_rq_set_block_pc(rq);
b6ff1b14	276	rq->cmd_len = COMMAND_SIZE(cmd);
5e7dccad	277	rq->cmd[0] = cmd;
5e7dccad CS	278
	279	switch (cmd) {
	280	case MODE_SELECT:
b6ff1b14	281	len = sizeof(short_trespass);
b6ff1b14	282	rq->cmd[1] = 0x10;
6c71dcb2	283	rq->cmd[4] = len;
b6ff1b14 HR	284	break;
	285	case MODE_SELECT_10:
	286	len = sizeof(long_trespass);
5e7dccad	287	rq->cmd[1] = 0x10;
6c71dcb2	288	rq->cmd[8] = len;
5e7dccad CS	289	break;
5e7dccad CS	290	case INQUIRY:
5e7dccad	291	len = CLARIION_BUFFER_SIZE;
6c71dcb2	292	rq->cmd[4] = len;
b6ff1b14	293	memset(buffer, 0, len);
5e7dccad CS	294	break;
	295	default:
	296	BUG_ON(1);
	297	break;
	298	}
	299
6000a368 MC	300	rq->cmd_flags \|= REQ_FAILFAST_DEV \| REQ_FAILFAST_TRANSPORT \|
6000a368 MC	301	REQ_FAILFAST_DRIVER;
5e7dccad CS	302	rq->timeout = CLARIION_TIMEOUT;
	303	rq->retries = CLARIION_RETRIES;
	304
b6ff1b14 HR	305	if (blk_rq_map_kern(rq->q, rq, buffer, len, GFP_NOIO)) {
b6ff1b14 HR	306	blk_put_request(rq);
5e7dccad CS	307	return NULL;
	308	}
	309
	310	return rq;
	311	}
	312
b6ff1b14 HR	313	static int send_inquiry_cmd(struct scsi_device *sdev, int page,
b6ff1b14 HR	314	struct clariion_dh_data *csdev)
5e7dccad	315	{
b6ff1b14 HR	316	struct request *rq = get_req(sdev, INQUIRY, csdev->buffer);
b6ff1b14 HR	317	int err;
5e7dccad CS	318
	319	if (!rq)
	320	return SCSI_DH_RES_TEMP_UNAVAIL;
	321
b6ff1b14 HR	322	rq->sense = csdev->sense;
	323	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
	324	rq->sense_len = csdev->senselen = 0;
	325
	326	rq->cmd[0] = INQUIRY;
	327	if (page != 0) {
	328	rq->cmd[1] = 1;
	329	rq->cmd[2] = page;
	330	}
	331	err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
	332	if (err == -EIO) {
	333	sdev_printk(KERN_INFO, sdev,
	334	"%s: failed to send %s INQUIRY: %x\n",
	335	CLARIION_NAME, page?"EVPD":"standard",
	336	rq->errors);
	337	csdev->senselen = rq->sense_len;
	338	err = SCSI_DH_IO;
	339	}
	340
	341	blk_put_request(rq);
	342
	343	return err;
5e7dccad CS	344	}
5e7dccad CS	345
b6ff1b14 HR	346	static int send_trespass_cmd(struct scsi_device *sdev,
b6ff1b14 HR	347	struct clariion_dh_data *csdev)
5e7dccad	348	{
b6ff1b14 HR	349	struct request *rq;
	350	unsigned char *page22;
	351	int err, len, cmd;
	352
	353	if (csdev->flags & CLARIION_SHORT_TRESPASS) {
	354	page22 = short_trespass;
	355	if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
	356	/* Set Honor Reservations bit */
	357	page22[6] \|= 0x80;
	358	len = sizeof(short_trespass);
	359	cmd = MODE_SELECT;
	360	} else {
	361	page22 = long_trespass;
	362	if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
	363	/* Set Honor Reservations bit */
	364	page22[10] \|= 0x80;
	365	len = sizeof(long_trespass);
	366	cmd = MODE_SELECT_10;
	367	}
	368	BUG_ON((len > CLARIION_BUFFER_SIZE));
	369	memcpy(csdev->buffer, page22, len);
5e7dccad	370
b6ff1b14 HR	371	rq = get_req(sdev, cmd, csdev->buffer);
	372	if (!rq)
	373	return SCSI_DH_RES_TEMP_UNAVAIL;
5e7dccad	374
b6ff1b14 HR	375	rq->sense = csdev->sense;
	376	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
	377	rq->sense_len = csdev->senselen = 0;
5e7dccad	378
b6ff1b14 HR	379	err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
	380	if (err == -EIO) {
	381	if (rq->sense_len) {
	382	err = trespass_endio(sdev, csdev->sense);
	383	} else {
	384	sdev_printk(KERN_INFO, sdev,
	385	"%s: failed to send MODE SELECT: %x\n",
	386	CLARIION_NAME, rq->errors);
	387	}
	388	}
	389
	390	blk_put_request(rq);
	391
	392	return err;
5e7dccad CS	393	}
	394
	395	static int clariion_check_sense(struct scsi_device *sdev,
	396	struct scsi_sense_hdr *sense_hdr)
	397	{
	398	switch (sense_hdr->sense_key) {
	399	case NOT_READY:
	400	if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03)
	401	/*
	402	* LUN Not Ready - Manual Intervention Required
	403	* indicates this is a passive path.
	404	*
	405	* FIXME: However, if this is seen and EVPD C0
	406	* indicates that this is due to a NDU in
	407	* progress, we should set FAIL_PATH too.
	408	* This indicates we might have to do a SCSI
	409	* inquiry in the end_io path. Ugh.
	410	*
	411	* Can return FAILED only when we want the error
	412	* recovery process to kick in.
	413	*/
	414	return SUCCESS;
	415	break;
	416	case ILLEGAL_REQUEST:
	417	if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01)
	418	/*
	419	* An array based copy is in progress. Do not
	420	* fail the path, do not bypass to another PG,
	421	* do not retry. Fail the IO immediately.
	422	* (Actually this is the same conclusion as in
	423	* the default handler, but lets make sure.)
	424	*
	425	* Can return FAILED only when we want the error
	426	* recovery process to kick in.
	427	*/
	428	return SUCCESS;
	429	break;
	430	case UNIT_ATTENTION:
	431	if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
	432	/*
	433	* Unit Attention Code. This is the first IO
	434	* to the new path, so just retry.
	435	*/
c7dbb627	436	return ADD_TO_MLQUEUE;
5e7dccad CS	437	break;
	438	}
	439
b6ff1b14 HR	440	return SCSI_RETURN_NOT_HANDLED;
	441	}
	442
	443	static int clariion_prep_fn(struct scsi_device sdev, struct request req)
	444	{
ee14c674	445	struct clariion_dh_data *h = sdev->handler_data;
b6ff1b14 HR	446	int ret = BLKPREP_OK;
	447
	448	if (h->lun_state != CLARIION_LUN_OWNED) {
	449	ret = BLKPREP_KILL;
	450	req->cmd_flags \|= REQ_QUIET;
	451	}
	452	return ret;
	453
	454	}
	455
	456	static int clariion_std_inquiry(struct scsi_device *sdev,
	457	struct clariion_dh_data *csdev)
	458	{
693e6513	459	int err = SCSI_DH_OK;
b6ff1b14 HR	460	char *sp_model;
	461
	462	err = send_inquiry_cmd(sdev, 0, csdev);
	463	if (err != SCSI_DH_OK && csdev->senselen) {
	464	struct scsi_sense_hdr sshdr;
	465
	466	if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
	467	&sshdr)) {
	468	sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
	469	"%02x/%02x/%02x\n", CLARIION_NAME,
	470	sshdr.sense_key, sshdr.asc, sshdr.ascq);
	471	}
	472	err = SCSI_DH_IO;
	473	goto out;
	474	}
	475
	476	sp_model = parse_sp_model(sdev, csdev->buffer);
	477	if (!sp_model) {
	478	err = SCSI_DH_DEV_UNSUPP;
	479	goto out;
	480	}
	481
	482	/*
	483	* FC Series arrays do not support long trespass
	484	*/
	485	if (!strlen(sp_model) \|\| !strncmp(sp_model, "FC",2))
	486	csdev->flags \|= CLARIION_SHORT_TRESPASS;
	487
	488	sdev_printk(KERN_INFO, sdev,
	489	"%s: detected Clariion %s, flags %x\n",
	490	CLARIION_NAME, sp_model, csdev->flags);
	491	out:
	492	return err;
	493	}
	494
	495	static int clariion_send_inquiry(struct scsi_device *sdev,
	496	struct clariion_dh_data *csdev)
	497	{
	498	int err, retry = CLARIION_RETRIES;
	499
	500	retry:
	501	err = send_inquiry_cmd(sdev, 0xC0, csdev);
	502	if (err != SCSI_DH_OK && csdev->senselen) {
	503	struct scsi_sense_hdr sshdr;
	504
	505	err = scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
	506	&sshdr);
	507	if (!err)
	508	return SCSI_DH_IO;
	509
	510	err = clariion_check_sense(sdev, &sshdr);
c7dbb627	511	if (retry > 0 && err == ADD_TO_MLQUEUE) {
b6ff1b14 HR	512	retry--;
	513	goto retry;
	514	}
	515	sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
	516	"%02x/%02x/%02x\n", CLARIION_NAME,
	517	sshdr.sense_key, sshdr.asc, sshdr.ascq);
	518	err = SCSI_DH_IO;
	519	} else {
	520	err = parse_sp_info_reply(sdev, csdev);
	521	}
	522	return err;
	523	}
	524
3ae31f6a CS	525	static int clariion_activate(struct scsi_device *sdev,
3ae31f6a CS	526	activate_complete fn, void *data)
b6ff1b14	527	{
ee14c674	528	struct clariion_dh_data *csdev = sdev->handler_data;
b6ff1b14 HR	529	int result;
	530
	531	result = clariion_send_inquiry(sdev, csdev);
	532	if (result != SCSI_DH_OK)
	533	goto done;
	534
	535	if (csdev->lun_state == CLARIION_LUN_OWNED)
	536	goto done;
	537
	538	result = send_trespass_cmd(sdev, csdev);
	539	if (result != SCSI_DH_OK)
	540	goto done;
	541	sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n",
	542	CLARIION_NAME,
	543	csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" );
	544
	545	/* Update status */
	546	result = clariion_send_inquiry(sdev, csdev);
	547	if (result != SCSI_DH_OK)
	548	goto done;
	549
	550	done:
	551	sdev_printk(KERN_INFO, sdev,
	552	"%s: at SP %c Port %d (%s, default SP %c)\n",
	553	CLARIION_NAME, csdev->current_sp + 'A',
	554	csdev->port, lun_state[csdev->lun_state],
	555	csdev->default_sp + 'A');
	556
3ae31f6a CS	557	if (fn)
	558	fn(data, result);
	559	return 0;
5e7dccad	560	}
14d9cb5f CS	561	/*
	562	* params - parameters in the following format
	563	* "no_of_params\0param1\0param2\0param3\0...\0"
	564	* for example, string for 2 parameters with value 10 and 21
	565	* is specified as "2\010\021\0".
	566	*/
	567	static int clariion_set_params(struct scsi_device sdev, const char params)
	568	{
ee14c674	569	struct clariion_dh_data *csdev = sdev->handler_data;
14d9cb5f CS	570	unsigned int hr = 0, st = 0, argc;
	571	const char *p = params;
	572	int result = SCSI_DH_OK;
	573
	574	if ((sscanf(params, "%u", &argc) != 1) \|\| (argc != 2))
	575	return -EINVAL;
	576
	577	while (*p++)
	578	;
	579	if ((sscanf(p, "%u", &st) != 1) \|\| (st > 1))
	580	return -EINVAL;
	581
	582	while (*p++)
	583	;
	584	if ((sscanf(p, "%u", &hr) != 1) \|\| (hr > 1))
	585	return -EINVAL;
	586
	587	if (st)
	588	csdev->flags \|= CLARIION_SHORT_TRESPASS;
	589	else
	590	csdev->flags &= ~CLARIION_SHORT_TRESPASS;
	591
	592	if (hr)
	593	csdev->flags \|= CLARIION_HONOR_RESERVATIONS;
	594	else
	595	csdev->flags &= ~CLARIION_HONOR_RESERVATIONS;
	596
	597	/*
	598	* If this path is owned, we have to send a trespass command
	599	* with the new parameters. If not, simply return. Next trespass
	600	* command would use the parameters.
	601	*/
	602	if (csdev->lun_state != CLARIION_LUN_OWNED)
	603	goto done;
	604
	605	csdev->lun_state = CLARIION_LUN_UNINITIALIZED;
	606	result = send_trespass_cmd(sdev, csdev);
	607	if (result != SCSI_DH_OK)
	608	goto done;
	609
	610	/* Update status */
	611	result = clariion_send_inquiry(sdev, csdev);
	612
	613	done:
	614	return result;
	615	}
5e7dccad	616
ee14c674	617	static int clariion_bus_attach(struct scsi_device *sdev)
5e7dccad	618	{
5e7dccad	619	struct clariion_dh_data *h;
b6ff1b14	620	int err;
5e7dccad	621
cd37743f	622	h = kzalloc(sizeof(*h) , GFP_KERNEL);
1d520328	623	if (!h)
ee14c674	624	return -ENOMEM;
b6ff1b14	625	h->lun_state = CLARIION_LUN_UNINITIALIZED;
765cbc6d HR	626	h->default_sp = CLARIION_UNBOUND_LU;
765cbc6d HR	627	h->current_sp = CLARIION_UNBOUND_LU;
5e7dccad	628
b6ff1b14 HR	629	err = clariion_std_inquiry(sdev, h);
	630	if (err != SCSI_DH_OK)
	631	goto failed;
	632
	633	err = clariion_send_inquiry(sdev, h);
	634	if (err != SCSI_DH_OK)
	635	goto failed;
	636
b6ff1b14 HR	637	sdev_printk(KERN_INFO, sdev,
	638	"%s: connected to SP %c Port %d (%s, default SP %c)\n",
	639	CLARIION_NAME, h->current_sp + 'A',
	640	h->port, lun_state[h->lun_state],
	641	h->default_sp + 'A');
ee14c674 CH	642
	643	sdev->handler_data = h;
	644	return 0;
b6ff1b14 HR	645
b6ff1b14 HR	646	failed:
cd37743f	647	kfree(h);
ee14c674	648	return -EINVAL;
765cbc6d	649	}
5e7dccad	650
765cbc6d HR	651	static void clariion_bus_detach(struct scsi_device *sdev)
765cbc6d HR	652	{
ee14c674 CH	653	kfree(sdev->handler_data);
ee14c674 CH	654	sdev->handler_data = NULL;
5e7dccad CS	655	}
5e7dccad CS	656
1d520328 CH	657	static struct scsi_device_handler clariion_dh = {
	658	.name = CLARIION_NAME,
	659	.module = THIS_MODULE,
	660	.attach = clariion_bus_attach,
	661	.detach = clariion_bus_detach,
	662	.check_sense = clariion_check_sense,
	663	.activate = clariion_activate,
	664	.prep_fn = clariion_prep_fn,
	665	.set_params = clariion_set_params,
1d520328 CH	666	};
1d520328 CH	667
5e7dccad CS	668	static int __init clariion_init(void)
	669	{
	670	int r;
	671
	672	r = scsi_register_device_handler(&clariion_dh);
	673	if (r != 0)
b6ff1b14 HR	674	printk(KERN_ERR "%s: Failed to register scsi device handler.",
b6ff1b14 HR	675	CLARIION_NAME);
5e7dccad CS	676	return r;
	677	}
	678
	679	static void __exit clariion_exit(void)
	680	{
	681	scsi_unregister_device_handler(&clariion_dh);
	682	}
	683
	684	module_init(clariion_init);
	685	module_exit(clariion_exit);
	686
	687	MODULE_DESCRIPTION("EMC CX/AX/FC-family driver");
	688	MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, Chandra Seetharaman <sekharan@us.ibm.com>");
	689	MODULE_LICENSE("GPL");