[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / scsi / arm / fas216.h

/*
 *  linux/drivers/acorn/scsi/fas216.h
 *
 *  Copyright (C) 1997-2000 Russell King
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 *  FAS216 generic driver
 */
#ifndef FAS216_H
#define FAS216_H

#ifndef NO_IRQ
#define NO_IRQ 255
#endif

#include <scsi/scsi_eh.h>

#include "queue.h"
#include "msgqueue.h"

/* FAS register definitions */

/* transfer count low */
#define REG_CTCL		(0)
#define REG_STCL		(0)

/* transfer count medium */
#define REG_CTCM		(1)
#define REG_STCM		(1)

/* fifo data */
#define REG_FF			(2)

/* command */
#define REG_CMD			(3)
#define CMD_NOP			0x00
#define CMD_FLUSHFIFO		0x01
#define CMD_RESETCHIP		0x02
#define CMD_RESETSCSI		0x03

#define CMD_TRANSFERINFO	0x10
#define CMD_INITCMDCOMPLETE	0x11
#define CMD_MSGACCEPTED		0x12
#define CMD_PADBYTES		0x18
#define CMD_SETATN		0x1a
#define CMD_RSETATN		0x1b

#define CMD_SELECTWOATN		0x41
#define CMD_SELECTATN		0x42
#define CMD_SELECTATNSTOP	0x43
#define CMD_ENABLESEL		0x44
#define CMD_DISABLESEL		0x45
#define CMD_SELECTATN3		0x46
#define CMD_RESEL3		0x47

#define CMD_WITHDMA		0x80

/* status register (read) */
#define REG_STAT		(4)
#define STAT_IO			(1 << 0)			/* IO phase		*/
#define STAT_CD			(1 << 1)			/* CD phase		*/
#define STAT_MSG		(1 << 2)			/* MSG phase		*/
#define STAT_TRANSFERDONE	(1 << 3)			/* Transfer completed	*/
#define STAT_TRANSFERCNTZ	(1 << 4)			/* Transfer counter is zero */
#define STAT_PARITYERROR	(1 << 5)			/* Parity error		*/
#define STAT_REALBAD		(1 << 6)			/* Something bad	*/
#define STAT_INT		(1 << 7)			/* Interrupt		*/

#define STAT_BUSMASK		(STAT_MSG|STAT_CD|STAT_IO)
#define STAT_DATAOUT		(0)				/* Data out		*/
#define STAT_DATAIN		(STAT_IO)			/* Data in		*/
#define STAT_COMMAND		(STAT_CD)			/* Command out		*/
#define STAT_STATUS		(STAT_CD|STAT_IO)		/* Status In		*/
#define STAT_MESGOUT		(STAT_MSG|STAT_CD)		/* Message out		*/
#define STAT_MESGIN		(STAT_MSG|STAT_CD|STAT_IO)	/* Message In		*/

/* bus ID for select / reselect */
#define REG_SDID		(4)
#define BUSID(target)		((target) & 7)

/* Interrupt status register (read) */
#define REG_INST		(5)
#define INST_SELWOATN		(1 << 0)			/* Select w/o ATN	*/
#define INST_SELATN		(1 << 1)			/* Select w/ATN		*/
#define INST_RESELECTED		(1 << 2)			/* Reselected		*/
#define INST_FUNCDONE		(1 << 3)			/* Function done	*/
#define INST_BUSSERVICE		(1 << 4)			/* Bus service		*/
#define INST_DISCONNECT		(1 << 5)			/* Disconnect		*/
#define INST_ILLEGALCMD		(1 << 6)			/* Illegal command	*/
#define INST_BUSRESET		(1 << 7)			/* SCSI Bus reset	*/

/* Timeout register (write) */
#define REG_STIM		(5)

/* Sequence step register (read) */
#define REG_IS			(6)
#define IS_BITS			0x07
#define IS_SELARB		0x00				/* Select & Arb ok	*/
#define IS_MSGBYTESENT		0x01				/* One byte message sent*/
#define IS_NOTCOMMAND		0x02				/* Not in command state	*/
#define IS_EARLYPHASE		0x03				/* Early phase change	*/
#define IS_COMPLETE		0x04				/* Command ok		*/
#define IS_SOF			0x08				/* Sync off flag	*/

/* Transfer period step (write) */
#define REG_STP			(6)

/* Synchronous Offset (write) */
#define REG_SOF			(7)

/* Fifo state register (read) */
#define REG_CFIS		(7)
#define CFIS_CF			0x1f				/* Num bytes in FIFO	*/
#define CFIS_IS			0xe0				/* Step			*/

/* config register 1 */
#define REG_CNTL1		(8)
#define CNTL1_CID		(7 << 0)			/* Chip ID			*/
#define CNTL1_STE		(1 << 3)			/* Self test enable		*/
#define CNTL1_PERE		(1 << 4)			/* Parity enable reporting en.	*/
#define CNTL1_PTE		(1 << 5)			/* Parity test enable		*/
#define CNTL1_DISR		(1 << 6)			/* Disable Irq on SCSI reset	*/
#define CNTL1_ETM		(1 << 7)			/* Extended Timing Mode		*/

/* Clock conversion factor (read) */
#define REG_CLKF		(9)
#define CLKF_F37MHZ		0x00				/* 35.01 - 40 MHz		*/
#define CLKF_F10MHZ		0x02				/* 10 MHz			*/
#define CLKF_F12MHZ		0x03				/* 10.01 - 15 MHz		*/
#define CLKF_F17MHZ		0x04				/* 15.01 - 20 MHz		*/
#define CLKF_F22MHZ		0x05				/* 20.01 - 25 MHz		*/
#define CLKF_F27MHZ		0x06				/* 25.01 - 30 MHz		*/
#define CLKF_F32MHZ		0x07				/* 30.01 - 35 MHz		*/

/* Chip test register (write) */
#define REG_FTM			(10)
#define TEST_FTM		0x01				/* Force target mode		*/
#define TEST_FIM		0x02				/* Force initiator mode		*/
#define TEST_FHI		0x04				/* Force high impedance mode	*/

/* Configuration register 2 (read/write) */
#define REG_CNTL2		(11)
#define CNTL2_PGDP		(1 << 0)			/* Pass Th/Generate Data Parity	*/
#define CNTL2_PGRP		(1 << 1)			/* Pass Th/Generate Reg Parity	*/
#define CNTL2_ACDPE		(1 << 2)			/* Abort on Cmd/Data Parity Err	*/
#define CNTL2_S2FE		(1 << 3)			/* SCSI2 Features Enable	*/
#define CNTL2_TSDR		(1 << 4)			/* Tristate DREQ		*/
#define CNTL2_SBO		(1 << 5)			/* Select Byte Order		*/
#define CNTL2_ENF		(1 << 6)			/* Enable features		*/
#define CNTL2_DAE		(1 << 7)			/* Data Alignment Enable	*/

/* Configuration register 3 (read/write) */
#define REG_CNTL3		(12)
#define CNTL3_BS8		(1 << 0)			/* Burst size 8			*/
#define CNTL3_MDM		(1 << 1)			/* Modify DMA mode		*/
#define CNTL3_LBTM		(1 << 2)			/* Last Byte Transfer mode	*/
#define CNTL3_FASTCLK		(1 << 3)			/* Fast SCSI clocking		*/
#define CNTL3_FASTSCSI		(1 << 4)			/* Fast SCSI			*/
#define CNTL3_G2CB		(1 << 5)			/* Group2 SCSI support		*/
#define CNTL3_QTAG		(1 << 6)			/* Enable 3 byte msgs		*/
#define CNTL3_ADIDCHK		(1 << 7)			/* Additional ID check		*/

/* High transfer count (read/write) */
#define REG_CTCH		(14)
#define REG_STCH		(14)

/* ID register (read only) */
#define REG_ID			(14)

/* Data alignment */
#define REG_DAL			(15)

typedef enum {
	PHASE_IDLE,					/* we're not planning on doing anything	*/
	PHASE_SELECTION,				/* selecting a device			*/
	PHASE_SELSTEPS,					/* selection with command steps		*/
	PHASE_COMMAND,					/* command sent				*/
	PHASE_MESSAGESENT,				/* selected, and we're sending cmd	*/
	PHASE_DATAOUT,					/* data out to device			*/
	PHASE_DATAIN,					/* data in from device			*/
	PHASE_MSGIN,					/* message in from device		*/
	PHASE_MSGIN_DISCONNECT,				/* disconnecting from bus		*/
	PHASE_MSGOUT,					/* after message out phase		*/
	PHASE_MSGOUT_EXPECT,				/* expecting message out		*/
	PHASE_STATUS,					/* status from device			*/
	PHASE_DONE					/* Command complete			*/
} phase_t;

typedef enum {
	DMA_OUT,					/* DMA from memory to chip		*/
	DMA_IN						/* DMA from chip to memory		*/
} fasdmadir_t;

typedef enum {
	fasdma_none,					/* No dma				*/
	fasdma_pio,					/* PIO mode				*/
	fasdma_pseudo,					/* Pseudo DMA				*/
	fasdma_real_block,				/* Real DMA, on block by block basis	*/
	fasdma_real_all					/* Real DMA, on request by request	*/
} fasdmatype_t;

typedef enum {
	neg_wait,					/* Negotiate with device		*/
	neg_inprogress,					/* Negotiation sent			*/
	neg_complete,					/* Negotiation complete			*/
	neg_targcomplete,				/* Target completed negotiation		*/
	neg_invalid					/* Negotiation not supported		*/
} neg_t;

#define MAGIC	0x441296bdUL
#define NR_MSGS	8

#define FASCAP_DMA		(1 << 0)
#define FASCAP_PSEUDODMA	(1 << 1)

typedef struct {
	unsigned long		magic_start;
	spinlock_t		host_lock;
	struct Scsi_Host	*host;			/* host					*/
	struct scsi_cmnd	*SCpnt;			/* currently processing command		*/
	struct scsi_cmnd	*origSCpnt;		/* original connecting command		*/
	struct scsi_cmnd	*reqSCpnt;		/* request sense command		*/
	struct scsi_cmnd	*rstSCpnt;		/* reset command			*/
	struct scsi_cmnd	*pending_SCpnt[8];	/* per-device pending commands		*/
	int			next_pending;		/* next pending device			*/

	/*
	 * Error recovery
	 */
	wait_queue_head_t	eh_wait;
	struct timer_list	eh_timer;
	unsigned int		rst_dev_status;
	unsigned int		rst_bus_status;

	/* driver information */
	struct {
		phase_t		phase;			/* current phase			*/
		void __iomem	*io_base;		/* iomem base of FAS216			*/
		unsigned int	io_shift;		/* shift to adjust reg offsets by	*/
		unsigned char	cfg[4];			/* configuration registers		*/
		const char	*type;			/* chip type				*/
		unsigned int	irq;			/* interrupt				*/
		int		dma;			/* dma channel				*/

		struct scsi_pointer	SCp;			/* current commands data pointer	*/

		MsgQueue_t	msgs;			/* message queue for connected device	*/

		unsigned int	async_stp;		/* Async transfer STP value		*/
		unsigned char	msgin_fifo;		/* bytes in fifo at time of message in	*/
		unsigned char	message[256];		/* last message received from device	*/

		unsigned char	disconnectable:1;	/* this command can be disconnected	*/
		unsigned char	aborting:1;		/* aborting command			*/
	} scsi;

	/* statistics information */
	struct {
		unsigned int	queues;
		unsigned int	removes;
		unsigned int	fins;
		unsigned int	reads;
		unsigned int	writes;
		unsigned int	miscs;
		unsigned int	disconnects;
		unsigned int	aborts;
		unsigned int	bus_resets;
		unsigned int	host_resets;
	} stats;

	/* configuration information */
	struct {
		unsigned char	clockrate;		/* clock rate of FAS device (MHz)	*/
		unsigned char	select_timeout;		/* timeout (R5)				*/
		unsigned char	sync_max_depth;		/* Synchronous xfer max fifo depth	*/
		unsigned char	wide_max_size;		/* Maximum wide transfer size		*/
		unsigned char	cntl3;			/* Control Reg 3			*/
		unsigned int	asyncperiod;		/* Async transfer period (ns)		*/
		unsigned int	capabilities;		/* driver capabilities			*/
		unsigned int	disconnect_ok:1;	/* Disconnects allowed?			*/
	} ifcfg;

	/* queue handling */
	struct {
	    	Queue_t		issue;			/* issue queue				*/
    		Queue_t		disconnected;		/* disconnected command queue		*/
	} queues;

	/* per-device info */
	struct fas216_device {
		unsigned char	disconnect_ok:1;	/* device can disconnect		*/
		unsigned char	parity_enabled:1;	/* parity checking enabled		*/
		unsigned char	parity_check:1;		/* need to check parity checking	*/
		unsigned char	period;			/* sync xfer period in (*4ns)		*/
		unsigned char	stp;			/* synchronous transfer period		*/
		unsigned char	sof;			/* synchronous offset register		*/
		unsigned char	wide_xfer;		/* currently negociated wide transfer	*/
		neg_t		sync_state;		/* synchronous transfer mode		*/
		neg_t		wide_state;		/* wide transfer mode			*/
	} device[8];
	unsigned long	busyluns[64/sizeof(unsigned long)];/* array of bits indicating LUNs busy	*/

	/* dma */
	struct {
		fasdmatype_t	transfer_type;		/* current type of DMA transfer		*/
		fasdmatype_t	(*setup) (struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma);
		void		(*pseudo)(struct Scsi_Host *host, struct scsi_pointer *SCp, fasdmadir_t direction, int transfer);
		void		(*stop)  (struct Scsi_Host *host, struct scsi_pointer *SCp);
	} dma;

	/* miscellaneous */
	int			internal_done;		/* flag to indicate request done */
	struct scsi_eh_save	ses;		/* holds request sense restore info */
	unsigned long		magic_end;
} FAS216_Info;

/* Function: int fas216_init (struct Scsi_Host *instance)
 * Purpose : initialise FAS/NCR/AMD SCSI structures.
 * Params  : instance - a driver-specific filled-out structure
 * Returns : 0 on success
 */
extern int fas216_init (struct Scsi_Host *instance);

/* Function: int fas216_add (struct Scsi_Host *instance, struct device *dev)
 * Purpose : initialise FAS/NCR/AMD SCSI ic.
 * Params  : instance - a driver-specific filled-out structure
 * Returns : 0 on success
 */
extern int fas216_add (struct Scsi_Host *instance, struct device *dev);

/* Function: int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
 * Purpose : queue a command for adapter to process.
 * Params  : h - host adapter
 *	   : SCpnt - Command to queue
 * Returns : 0 - success, else error
 */
extern int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt);

/* Function: int fas216_noqueue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
 * Purpose : queue a command for adapter to process, and process it to completion.
 * Params  : h - host adapter
 *	   : SCpnt - Command to queue
 * Returns : 0 - success, else error
 */
extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *);

/* Function: irqreturn_t fas216_intr (FAS216_Info *info)
 * Purpose : handle interrupts from the interface to progress a command
 * Params  : info - interface to service
 */
extern irqreturn_t fas216_intr (FAS216_Info *info);

extern void fas216_remove (struct Scsi_Host *instance);

/* Function: void fas216_release (struct Scsi_Host *instance)
 * Purpose : release all resources and put everything to bed for FAS/NCR/AMD SCSI ic.
 * Params  : instance - a driver-specific filled-out structure
 * Returns : 0 on success
 */
extern void fas216_release (struct Scsi_Host *instance);

extern int fas216_print_host(FAS216_Info *info, char *buffer);
extern int fas216_print_stats(FAS216_Info *info, char *buffer);
extern int fas216_print_devices(FAS216_Info *info, char *buffer);

/* Function: int fas216_eh_abort(struct scsi_cmnd *SCpnt)
 * Purpose : abort this command
 * Params  : SCpnt - command to abort
 * Returns : FAILED if unable to abort
 */
extern int fas216_eh_abort(struct scsi_cmnd *SCpnt);

/* Function: int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
 * Purpose : Reset the device associated with this command
 * Params  : SCpnt - command specifing device to reset
 * Returns : FAILED if unable to reset
 */
extern int fas216_eh_device_reset(struct scsi_cmnd *SCpnt);

/* Function: int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt)
 * Purpose : Reset the complete bus associated with this command
 * Params  : SCpnt - command specifing bus to reset
 * Returns : FAILED if unable to reset
 */
extern int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt);

/* Function: int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
 * Purpose : Reset the host associated with this command
 * Params  : SCpnt - command specifing host to reset
 * Returns : FAILED if unable to reset
 */
extern int fas216_eh_host_reset(struct scsi_cmnd *SCpnt);

#endif /* FAS216_H */
Commit	Line	Data
1da177e4 LT	1	/*
	2	* linux/drivers/acorn/scsi/fas216.h
	3	*
	4	* Copyright (C) 1997-2000 Russell King
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License version 2 as
	8	* published by the Free Software Foundation.
	9	*
	10	* FAS216 generic driver
	11	*/
	12	#ifndef FAS216_H
	13	#define FAS216_H
	14
	15	#ifndef NO_IRQ
	16	#define NO_IRQ 255
	17	#endif
	18
ccf9ea91 BH	19	#include <scsi/scsi_eh.h>
ccf9ea91 BH	20
1da177e4 LT	21	#include "queue.h"
	22	#include "msgqueue.h"
	23
	24	/* FAS register definitions */
	25
	26	/* transfer count low */
	27	#define REG_CTCL (0)
	28	#define REG_STCL (0)
	29
	30	/* transfer count medium */
	31	#define REG_CTCM (1)
	32	#define REG_STCM (1)
	33
	34	/* fifo data */
	35	#define REG_FF (2)
	36
	37	/* command */
	38	#define REG_CMD (3)
	39	#define CMD_NOP 0x00
	40	#define CMD_FLUSHFIFO 0x01
	41	#define CMD_RESETCHIP 0x02
	42	#define CMD_RESETSCSI 0x03
	43
	44	#define CMD_TRANSFERINFO 0x10
	45	#define CMD_INITCMDCOMPLETE 0x11
	46	#define CMD_MSGACCEPTED 0x12
	47	#define CMD_PADBYTES 0x18
	48	#define CMD_SETATN 0x1a
	49	#define CMD_RSETATN 0x1b
	50
	51	#define CMD_SELECTWOATN 0x41
	52	#define CMD_SELECTATN 0x42
	53	#define CMD_SELECTATNSTOP 0x43
	54	#define CMD_ENABLESEL 0x44
	55	#define CMD_DISABLESEL 0x45
	56	#define CMD_SELECTATN3 0x46
	57	#define CMD_RESEL3 0x47
	58
	59	#define CMD_WITHDMA 0x80
	60
	61	/* status register (read) */
	62	#define REG_STAT (4)
	63	#define STAT_IO (1 << 0) /* IO phase */
	64	#define STAT_CD (1 << 1) /* CD phase */
	65	#define STAT_MSG (1 << 2) /* MSG phase */
	66	#define STAT_TRANSFERDONE (1 << 3) /* Transfer completed */
	67	#define STAT_TRANSFERCNTZ (1 << 4) /* Transfer counter is zero */
	68	#define STAT_PARITYERROR (1 << 5) /* Parity error */
	69	#define STAT_REALBAD (1 << 6) /* Something bad */
	70	#define STAT_INT (1 << 7) /* Interrupt */
	71
	72	#define STAT_BUSMASK (STAT_MSG\|STAT_CD\|STAT_IO)
	73	#define STAT_DATAOUT (0) /* Data out */
	74	#define STAT_DATAIN (STAT_IO) /* Data in */
	75	#define STAT_COMMAND (STAT_CD) /* Command out */
	76	#define STAT_STATUS (STAT_CD\|STAT_IO) /* Status In */
	77	#define STAT_MESGOUT (STAT_MSG\|STAT_CD) /* Message out */
	78	#define STAT_MESGIN (STAT_MSG\|STAT_CD\|STAT_IO) /* Message In */
	79
	80	/* bus ID for select / reselect */
	81	#define REG_SDID (4)
	82	#define BUSID(target) ((target) & 7)
	83
	84	/* Interrupt status register (read) */
85	#define REG_INST (5)
86	#define INST_SELWOATN (1 << 0) /* Select w/o ATN */
87	#define INST_SELATN (1 << 1) /* Select w/ATN */
88	#define INST_RESELECTED (1 << 2) /* Reselected */
89	#define INST_FUNCDONE (1 << 3) /* Function done */
90	#define INST_BUSSERVICE (1 << 4) /* Bus service */
91	#define INST_DISCONNECT (1 << 5) /* Disconnect */
92	#define INST_ILLEGALCMD (1 << 6) /* Illegal command */
93	#define INST_BUSRESET (1 << 7) /* SCSI Bus reset */
94
95	/* Timeout register (write) */
96	#define REG_STIM (5)
97
98	/* Sequence step register (read) */
99	#define REG_IS (6)
100	#define IS_BITS 0x07
101	#define IS_SELARB 0x00 /* Select & Arb ok */
102	#define IS_MSGBYTESENT 0x01 /* One byte message sent*/
103	#define IS_NOTCOMMAND 0x02 /* Not in command state */
104	#define IS_EARLYPHASE 0x03 /* Early phase change */
105	#define IS_COMPLETE 0x04 /* Command ok */
106	#define IS_SOF 0x08 /* Sync off flag */
107
108	/* Transfer period step (write) */
109	#define REG_STP (6)
110
111	/* Synchronous Offset (write) */
112	#define REG_SOF (7)
113
114	/* Fifo state register (read) */
115	#define REG_CFIS (7)
116	#define CFIS_CF 0x1f /* Num bytes in FIFO */
117	#define CFIS_IS 0xe0 /* Step */
118
119	/* config register 1 */
120	#define REG_CNTL1 (8)
121	#define CNTL1_CID (7 << 0) /* Chip ID */
122	#define CNTL1_STE (1 << 3) /* Self test enable */
123	#define CNTL1_PERE (1 << 4) /* Parity enable reporting en. */
124	#define CNTL1_PTE (1 << 5) /* Parity test enable */
125	#define CNTL1_DISR (1 << 6) /* Disable Irq on SCSI reset */
126	#define CNTL1_ETM (1 << 7) /* Extended Timing Mode */
127
128	/* Clock conversion factor (read) */
129	#define REG_CLKF (9)
130	#define CLKF_F37MHZ 0x00 /* 35.01 - 40 MHz */
131	#define CLKF_F10MHZ 0x02 /* 10 MHz */
132	#define CLKF_F12MHZ 0x03 /* 10.01 - 15 MHz */
133	#define CLKF_F17MHZ 0x04 /* 15.01 - 20 MHz */
134	#define CLKF_F22MHZ 0x05 /* 20.01 - 25 MHz */
135	#define CLKF_F27MHZ 0x06 /* 25.01 - 30 MHz */
136	#define CLKF_F32MHZ 0x07 /* 30.01 - 35 MHz */
137
138	/* Chip test register (write) */
139	#define REG_FTM (10)
140	#define TEST_FTM 0x01 /* Force target mode */
141	#define TEST_FIM 0x02 /* Force initiator mode */
142	#define TEST_FHI 0x04 /* Force high impedance mode */
143
144	/* Configuration register 2 (read/write) */
145	#define REG_CNTL2 (11)
146	#define CNTL2_PGDP (1 << 0) /* Pass Th/Generate Data Parity */
147	#define CNTL2_PGRP (1 << 1) /* Pass Th/Generate Reg Parity */
148	#define CNTL2_ACDPE (1 << 2) /* Abort on Cmd/Data Parity Err */
149	#define CNTL2_S2FE (1 << 3) /* SCSI2 Features Enable */
150	#define CNTL2_TSDR (1 << 4) /* Tristate DREQ */
151	#define CNTL2_SBO (1 << 5) /* Select Byte Order */
152	#define CNTL2_ENF (1 << 6) /* Enable features */
153	#define CNTL2_DAE (1 << 7) /* Data Alignment Enable */
154
155	/* Configuration register 3 (read/write) */
156	#define REG_CNTL3 (12)
157	#define CNTL3_BS8 (1 << 0) /* Burst size 8 */
158	#define CNTL3_MDM (1 << 1) /* Modify DMA mode */
159	#define CNTL3_LBTM (1 << 2) /* Last Byte Transfer mode */
160	#define CNTL3_FASTCLK (1 << 3) /* Fast SCSI clocking */
161	#define CNTL3_FASTSCSI (1 << 4) /* Fast SCSI */
162	#define CNTL3_G2CB (1 << 5) /* Group2 SCSI support */
163	#define CNTL3_QTAG (1 << 6) /* Enable 3 byte msgs */
164	#define CNTL3_ADIDCHK (1 << 7) /* Additional ID check */
165
166	/* High transfer count (read/write) */
167	#define REG_CTCH (14)
168	#define REG_STCH (14)
169
170	/* ID register (read only) */
171	#define REG_ID (14)
172
173	/* Data alignment */
174	#define REG_DAL (15)
175
176	typedef enum {
177	PHASE_IDLE, /* we're not planning on doing anything */
178	PHASE_SELECTION, /* selecting a device */
179	PHASE_SELSTEPS, /* selection with command steps */
180	PHASE_COMMAND, /* command sent */
181	PHASE_MESSAGESENT, /* selected, and we're sending cmd */
182	PHASE_DATAOUT, /* data out to device */
183	PHASE_DATAIN, /* data in from device */
184	PHASE_MSGIN, /* message in from device */
185	PHASE_MSGIN_DISCONNECT, /* disconnecting from bus */
186	PHASE_MSGOUT, /* after message out phase */
187	PHASE_MSGOUT_EXPECT, /* expecting message out */
188	PHASE_STATUS, /* status from device */
189	PHASE_DONE /* Command complete */
190	} phase_t;
191
192	typedef enum {
193	DMA_OUT, /* DMA from memory to chip */
194	DMA_IN /* DMA from chip to memory */
195	} fasdmadir_t;
196
197	typedef enum {
198	fasdma_none, /* No dma */
199	fasdma_pio, /* PIO mode */
200	fasdma_pseudo, /* Pseudo DMA */
201	fasdma_real_block, /* Real DMA, on block by block basis */
202	fasdma_real_all /* Real DMA, on request by request */
203	} fasdmatype_t;
204
205	typedef enum {
25985edc LDM	206	neg_wait, /* Negotiate with device */
	207	neg_inprogress, /* Negotiation sent */
	208	neg_complete, /* Negotiation complete */
	209	neg_targcomplete, /* Target completed negotiation */
	210	neg_invalid /* Negotiation not supported */
1da177e4 LT	211	} neg_t;
	212
	213	#define MAGIC 0x441296bdUL
	214	#define NR_MSGS 8
	215
	216	#define FASCAP_DMA (1 << 0)
	217	#define FASCAP_PSEUDODMA (1 << 1)
	218
	219	typedef struct {
	220	unsigned long magic_start;
	221	spinlock_t host_lock;
	222	struct Scsi_Host host; / host */
ee0ca6ba HK	223	struct scsi_cmnd SCpnt; / currently processing command */
	224	struct scsi_cmnd origSCpnt; / original connecting command */
	225	struct scsi_cmnd reqSCpnt; / request sense command */
	226	struct scsi_cmnd rstSCpnt; / reset command */
	227	struct scsi_cmnd pending_SCpnt[8]; / per-device pending commands */
1da177e4 LT	228	int next_pending; /* next pending device */
	229
	230	/*
	231	* Error recovery
	232	*/
	233	wait_queue_head_t eh_wait;
	234	struct timer_list eh_timer;
	235	unsigned int rst_dev_status;
	236	unsigned int rst_bus_status;
	237
	238	/* driver information */
	239	struct {
	240	phase_t phase; /* current phase */
	241	void __iomem io_base; / iomem base of FAS216 */
	242	unsigned int io_shift; /* shift to adjust reg offsets by */
	243	unsigned char cfg[4]; /* configuration registers */
	244	const char type; / chip type */
	245	unsigned int irq; /* interrupt */
	246	int dma; /* dma channel */
	247
0a04137e	248	struct scsi_pointer SCp; /* current commands data pointer */
1da177e4 LT	249
	250	MsgQueue_t msgs; /* message queue for connected device */
	251
	252	unsigned int async_stp; /* Async transfer STP value */
	253	unsigned char msgin_fifo; /* bytes in fifo at time of message in */
	254	unsigned char message[256]; /* last message received from device */
	255
	256	unsigned char disconnectable:1; /* this command can be disconnected */
	257	unsigned char aborting:1; /* aborting command */
	258	} scsi;
	259
	260	/* statistics information */
	261	struct {
	262	unsigned int queues;
	263	unsigned int removes;
	264	unsigned int fins;
	265	unsigned int reads;
	266	unsigned int writes;
	267	unsigned int miscs;
	268	unsigned int disconnects;
	269	unsigned int aborts;
	270	unsigned int bus_resets;
	271	unsigned int host_resets;
	272	} stats;
	273
	274	/* configuration information */
	275	struct {
	276	unsigned char clockrate; /* clock rate of FAS device (MHz) */
	277	unsigned char select_timeout; /* timeout (R5) */
	278	unsigned char sync_max_depth; /* Synchronous xfer max fifo depth */
	279	unsigned char wide_max_size; /* Maximum wide transfer size */
	280	unsigned char cntl3; /* Control Reg 3 */
	281	unsigned int asyncperiod; /* Async transfer period (ns) */
	282	unsigned int capabilities; /* driver capabilities */
	283	unsigned int disconnect_ok:1; /* Disconnects allowed? */
	284	} ifcfg;
	285
	286	/* queue handling */
	287	struct {
	288	Queue_t issue; /* issue queue */
	289	Queue_t disconnected; /* disconnected command queue */
	290	} queues;
	291
	292	/* per-device info */
	293	struct fas216_device {
	294	unsigned char disconnect_ok:1; /* device can disconnect */
	295	unsigned char parity_enabled:1; /* parity checking enabled */
	296	unsigned char parity_check:1; /* need to check parity checking */
	297	unsigned char period; /* sync xfer period in (4ns) /
	298	unsigned char stp; /* synchronous transfer period */
	299	unsigned char sof; /* synchronous offset register */
	300	unsigned char wide_xfer; /* currently negociated wide transfer */
	301	neg_t sync_state; /* synchronous transfer mode */
	302	neg_t wide_state; /* wide transfer mode */
	303	} device[8];
	304	unsigned long busyluns[64/sizeof(unsigned long)];/* array of bits indicating LUNs busy */
	305
	306	/* dma */
	307	struct {
	308	fasdmatype_t transfer_type; /* current type of DMA transfer */
0a04137e CH	309	fasdmatype_t (setup) (struct Scsi_Host host, struct scsi_pointer *SCp, fasdmadir_t direction, fasdmatype_t min_dma);
	310	void (pseudo)(struct Scsi_Host host, struct scsi_pointer *SCp, fasdmadir_t direction, int transfer);
	311	void (stop) (struct Scsi_Host host, struct scsi_pointer *SCp);
1da177e4 LT	312	} dma;
	313
	314	/* miscellaneous */
	315	int internal_done; /* flag to indicate request done */
0e935c9e	316	struct scsi_eh_save ses; /* holds request sense restore info */
1da177e4 LT	317	unsigned long magic_end;
	318	} FAS216_Info;
	319
	320	/* Function: int fas216_init (struct Scsi_Host *instance)
	321	* Purpose : initialise FAS/NCR/AMD SCSI structures.
	322	* Params : instance - a driver-specific filled-out structure
	323	* Returns : 0 on success
	324	*/
	325	extern int fas216_init (struct Scsi_Host *instance);
	326
	327	/* Function: int fas216_add (struct Scsi_Host instance, struct device dev)
	328	* Purpose : initialise FAS/NCR/AMD SCSI ic.
	329	* Params : instance - a driver-specific filled-out structure
	330	* Returns : 0 on success
	331	*/
	332	extern int fas216_add (struct Scsi_Host instance, struct device dev);
	333
f281233d	334	/* Function: int fas216_queue_command(struct Scsi_Host h, struct scsi_cmnd SCpnt)
1da177e4	335	* Purpose : queue a command for adapter to process.
f281233d JG	336	* Params : h - host adapter
f281233d JG	337	* : SCpnt - Command to queue
1da177e4 LT	338	* Returns : 0 - success, else error
1da177e4 LT	339	*/
f281233d	340	extern int fas216_queue_command(struct Scsi_Host h, struct scsi_cmnd SCpnt);
1da177e4	341
f281233d	342	/* Function: int fas216_noqueue_command(struct Scsi_Host h, struct scsi_cmnd SCpnt)
1da177e4	343	* Purpose : queue a command for adapter to process, and process it to completion.
f281233d JG	344	* Params : h - host adapter
f281233d JG	345	* : SCpnt - Command to queue
1da177e4 LT	346	* Returns : 0 - success, else error
1da177e4 LT	347	*/
5d61b718	348	extern int fas216_noqueue_command(struct Scsi_Host , struct scsi_cmnd );
1da177e4 LT	349
	350	/* Function: irqreturn_t fas216_intr (FAS216_Info *info)
	351	* Purpose : handle interrupts from the interface to progress a command
	352	* Params : info - interface to service
	353	*/
	354	extern irqreturn_t fas216_intr (FAS216_Info *info);
	355
	356	extern void fas216_remove (struct Scsi_Host *instance);
	357
	358	/* Function: void fas216_release (struct Scsi_Host *instance)
	359	* Purpose : release all resources and put everything to bed for FAS/NCR/AMD SCSI ic.
	360	* Params : instance - a driver-specific filled-out structure
	361	* Returns : 0 on success
	362	*/
	363	extern void fas216_release (struct Scsi_Host *instance);
	364
	365	extern int fas216_print_host(FAS216_Info info, char buffer);
	366	extern int fas216_print_stats(FAS216_Info info, char buffer);
	367	extern int fas216_print_devices(FAS216_Info info, char buffer);
	368
ee0ca6ba	369	/* Function: int fas216_eh_abort(struct scsi_cmnd *SCpnt)
1da177e4 LT	370	* Purpose : abort this command
	371	* Params : SCpnt - command to abort
	372	* Returns : FAILED if unable to abort
	373	*/
ee0ca6ba	374	extern int fas216_eh_abort(struct scsi_cmnd *SCpnt);
1da177e4	375
ee0ca6ba	376	/* Function: int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
1da177e4 LT	377	* Purpose : Reset the device associated with this command
	378	* Params : SCpnt - command specifing device to reset
	379	* Returns : FAILED if unable to reset
	380	*/
ee0ca6ba	381	extern int fas216_eh_device_reset(struct scsi_cmnd *SCpnt);
1da177e4	382
ee0ca6ba	383	/* Function: int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt)
1da177e4 LT	384	* Purpose : Reset the complete bus associated with this command
	385	* Params : SCpnt - command specifing bus to reset
	386	* Returns : FAILED if unable to reset
	387	*/
ee0ca6ba	388	extern int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt);
1da177e4	389
ee0ca6ba	390	/* Function: int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
1da177e4 LT	391	* Purpose : Reset the host associated with this command
	392	* Params : SCpnt - command specifing host to reset
	393	* Returns : FAILED if unable to reset
	394	*/
ee0ca6ba	395	extern int fas216_eh_host_reset(struct scsi_cmnd *SCpnt);
1da177e4 LT	396
1da177e4 LT	397	#endif /* FAS216_H */