Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | #include <linux/types.h> |
2 | #include <linux/mm.h> | |
3 | #include <linux/blkdev.h> | |
1da177e4 LT |
4 | #include <linux/ioport.h> |
5 | #include <linux/init.h> | |
6 | #include <linux/spinlock.h> | |
7 | #include <linux/interrupt.h> | |
8 | ||
9 | #include <asm/setup.h> | |
10 | #include <asm/page.h> | |
11 | #include <asm/pgtable.h> | |
12 | #include <asm/amigaints.h> | |
13 | #include <asm/amigahw.h> | |
14 | #include <asm/irq.h> | |
15 | ||
16 | #include "scsi.h" | |
17 | #include <scsi/scsi_host.h> | |
18 | #include "wd33c93.h" | |
19 | #include "a3000.h" | |
20 | ||
21 | #include<linux/stat.h> | |
22 | ||
23 | #define DMA(ptr) ((a3000_scsiregs *)((ptr)->base)) | |
24 | #define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) | |
25 | ||
26 | static struct Scsi_Host *a3000_host = NULL; | |
27 | ||
7d12e780 | 28 | static irqreturn_t a3000_intr (int irq, void *dummy) |
1da177e4 LT |
29 | { |
30 | unsigned long flags; | |
31 | unsigned int status = DMA(a3000_host)->ISTR; | |
32 | ||
33 | if (!(status & ISTR_INT_P)) | |
34 | return IRQ_NONE; | |
35 | if (status & ISTR_INTS) | |
36 | { | |
37 | spin_lock_irqsave(a3000_host->host_lock, flags); | |
38 | wd33c93_intr (a3000_host); | |
39 | spin_unlock_irqrestore(a3000_host->host_lock, flags); | |
40 | return IRQ_HANDLED; | |
41 | } | |
42 | printk("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status); | |
43 | return IRQ_NONE; | |
44 | } | |
45 | ||
65396410 | 46 | static int dma_setup(struct scsi_cmnd *cmd, int dir_in) |
1da177e4 LT |
47 | { |
48 | unsigned short cntr = CNTR_PDMD | CNTR_INTEN; | |
49 | unsigned long addr = virt_to_bus(cmd->SCp.ptr); | |
50 | ||
51 | /* | |
52 | * if the physical address has the wrong alignment, or if | |
53 | * physical address is bad, or if it is a write and at the | |
54 | * end of a physical memory chunk, then allocate a bounce | |
55 | * buffer | |
56 | */ | |
7b892806 | 57 | if (addr & A3000_XFER_MASK) |
1da177e4 LT |
58 | { |
59 | HDATA(a3000_host)->dma_bounce_len = (cmd->SCp.this_residual + 511) | |
60 | & ~0x1ff; | |
61 | HDATA(a3000_host)->dma_bounce_buffer = | |
62 | kmalloc (HDATA(a3000_host)->dma_bounce_len, GFP_KERNEL); | |
63 | ||
64 | /* can't allocate memory; use PIO */ | |
65 | if (!HDATA(a3000_host)->dma_bounce_buffer) { | |
66 | HDATA(a3000_host)->dma_bounce_len = 0; | |
67 | return 1; | |
68 | } | |
69 | ||
70 | if (!dir_in) { | |
71 | /* copy to bounce buffer for a write */ | |
cc0455fa BH |
72 | memcpy (HDATA(a3000_host)->dma_bounce_buffer, |
73 | cmd->SCp.ptr, cmd->SCp.this_residual); | |
1da177e4 LT |
74 | } |
75 | ||
76 | addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer); | |
77 | } | |
78 | ||
79 | /* setup dma direction */ | |
80 | if (!dir_in) | |
81 | cntr |= CNTR_DDIR; | |
82 | ||
83 | /* remember direction */ | |
84 | HDATA(a3000_host)->dma_dir = dir_in; | |
85 | ||
86 | DMA(a3000_host)->CNTR = cntr; | |
87 | ||
88 | /* setup DMA *physical* address */ | |
89 | DMA(a3000_host)->ACR = addr; | |
90 | ||
91 | if (dir_in) | |
92 | /* invalidate any cache */ | |
93 | cache_clear (addr, cmd->SCp.this_residual); | |
94 | else | |
95 | /* push any dirty cache */ | |
96 | cache_push (addr, cmd->SCp.this_residual); | |
97 | ||
98 | /* start DMA */ | |
99 | mb(); /* make sure setup is completed */ | |
100 | DMA(a3000_host)->ST_DMA = 1; | |
101 | mb(); /* make sure DMA has started before next IO */ | |
102 | ||
103 | /* return success */ | |
104 | return 0; | |
105 | } | |
106 | ||
65396410 HK |
107 | static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, |
108 | int status) | |
1da177e4 LT |
109 | { |
110 | /* disable SCSI interrupts */ | |
111 | unsigned short cntr = CNTR_PDMD; | |
112 | ||
113 | if (!HDATA(instance)->dma_dir) | |
114 | cntr |= CNTR_DDIR; | |
115 | ||
116 | DMA(instance)->CNTR = cntr; | |
117 | mb(); /* make sure CNTR is updated before next IO */ | |
118 | ||
119 | /* flush if we were reading */ | |
120 | if (HDATA(instance)->dma_dir) { | |
121 | DMA(instance)->FLUSH = 1; | |
122 | mb(); /* don't allow prefetch */ | |
123 | while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) | |
124 | barrier(); | |
125 | mb(); /* no IO until FLUSH is done */ | |
126 | } | |
127 | ||
128 | /* clear a possible interrupt */ | |
129 | /* I think that this CINT is only necessary if you are | |
130 | * using the terminal count features. HM 7 Mar 1994 | |
131 | */ | |
132 | DMA(instance)->CINT = 1; | |
133 | ||
134 | /* stop DMA */ | |
135 | DMA(instance)->SP_DMA = 1; | |
136 | mb(); /* make sure DMA is stopped before next IO */ | |
137 | ||
138 | /* restore the CONTROL bits (minus the direction flag) */ | |
139 | DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; | |
140 | mb(); /* make sure CNTR is updated before next IO */ | |
141 | ||
142 | /* copy from a bounce buffer, if necessary */ | |
143 | if (status && HDATA(instance)->dma_bounce_buffer) { | |
cc0455fa | 144 | if (SCpnt) { |
1da177e4 LT |
145 | if (HDATA(instance)->dma_dir && SCpnt) |
146 | memcpy (SCpnt->SCp.ptr, | |
147 | HDATA(instance)->dma_bounce_buffer, | |
148 | SCpnt->SCp.this_residual); | |
149 | kfree (HDATA(instance)->dma_bounce_buffer); | |
150 | HDATA(instance)->dma_bounce_buffer = NULL; | |
151 | HDATA(instance)->dma_bounce_len = 0; | |
152 | } else { | |
1da177e4 LT |
153 | kfree (HDATA(instance)->dma_bounce_buffer); |
154 | HDATA(instance)->dma_bounce_buffer = NULL; | |
155 | HDATA(instance)->dma_bounce_len = 0; | |
156 | } | |
157 | } | |
158 | } | |
159 | ||
d0be4a7d | 160 | int __init a3000_detect(struct scsi_host_template *tpnt) |
1da177e4 LT |
161 | { |
162 | wd33c93_regs regs; | |
163 | ||
164 | if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI)) | |
165 | return 0; | |
166 | if (!request_mem_region(0xDD0000, 256, "wd33c93")) | |
167 | return 0; | |
168 | ||
169 | tpnt->proc_name = "A3000"; | |
170 | tpnt->proc_info = &wd33c93_proc_info; | |
171 | ||
172 | a3000_host = scsi_register (tpnt, sizeof(struct WD33C93_hostdata)); | |
173 | if (a3000_host == NULL) | |
174 | goto fail_register; | |
175 | ||
176 | a3000_host->base = ZTWO_VADDR(0xDD0000); | |
177 | a3000_host->irq = IRQ_AMIGA_PORTS; | |
178 | DMA(a3000_host)->DAWR = DAWR_A3000; | |
179 | regs.SASR = &(DMA(a3000_host)->SASR); | |
180 | regs.SCMD = &(DMA(a3000_host)->SCMD); | |
181 | wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15); | |
1d6f359a | 182 | if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI", |
1da177e4 LT |
183 | a3000_intr)) |
184 | goto fail_irq; | |
185 | DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN; | |
186 | ||
187 | return 1; | |
188 | ||
189 | fail_irq: | |
190 | wd33c93_release(); | |
191 | scsi_unregister(a3000_host); | |
192 | fail_register: | |
193 | release_mem_region(0xDD0000, 256); | |
194 | return 0; | |
195 | } | |
196 | ||
65396410 | 197 | static int a3000_bus_reset(struct scsi_cmnd *cmd) |
1da177e4 LT |
198 | { |
199 | /* FIXME perform bus-specific reset */ | |
df0ae249 JG |
200 | |
201 | /* FIXME 2: kill this entire function, which should | |
202 | cause mid-layer to call wd33c93_host_reset anyway? */ | |
68b3aa7c JG |
203 | |
204 | spin_lock_irq(cmd->device->host->host_lock); | |
1da177e4 | 205 | wd33c93_host_reset(cmd); |
68b3aa7c JG |
206 | spin_unlock_irq(cmd->device->host->host_lock); |
207 | ||
1da177e4 LT |
208 | return SUCCESS; |
209 | } | |
210 | ||
211 | #define HOSTS_C | |
212 | ||
d0be4a7d | 213 | static struct scsi_host_template driver_template = { |
1da177e4 LT |
214 | .proc_name = "A3000", |
215 | .name = "Amiga 3000 built-in SCSI", | |
216 | .detect = a3000_detect, | |
217 | .release = a3000_release, | |
218 | .queuecommand = wd33c93_queuecommand, | |
219 | .eh_abort_handler = wd33c93_abort, | |
220 | .eh_bus_reset_handler = a3000_bus_reset, | |
221 | .eh_host_reset_handler = wd33c93_host_reset, | |
222 | .can_queue = CAN_QUEUE, | |
223 | .this_id = 7, | |
224 | .sg_tablesize = SG_ALL, | |
225 | .cmd_per_lun = CMD_PER_LUN, | |
226 | .use_clustering = ENABLE_CLUSTERING | |
227 | }; | |
228 | ||
229 | ||
230 | #include "scsi_module.c" | |
231 | ||
232 | int a3000_release(struct Scsi_Host *instance) | |
233 | { | |
234 | wd33c93_release(); | |
235 | DMA(instance)->CNTR = 0; | |
236 | release_mem_region(0xDD0000, 256); | |
237 | free_irq(IRQ_AMIGA_PORTS, a3000_intr); | |
238 | return 1; | |
239 | } | |
240 | ||
241 | MODULE_LICENSE("GPL"); |