Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | 3w-xxxx.c -- 3ware Storage Controller device driver for Linux. | |
3 | ||
4deedd84 | 4 | Written By: Adam Radford <linuxraid@lsi.com> |
1da177e4 LT |
5 | Modifications By: Joel Jacobson <linux@3ware.com> |
6 | Arnaldo Carvalho de Melo <acme@conectiva.com.br> | |
7 | Brad Strand <linux@3ware.com> | |
8 | ||
4deedd84 | 9 | Copyright (C) 1999-2010 3ware Inc. |
1da177e4 | 10 | |
06fe9fb4 | 11 | Kernel compatibility By: Andre Hedrick <andre@suse.com> |
1da177e4 LT |
12 | Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com> |
13 | ||
14 | Further tiny build fixes and trivial hoovering Alan Cox | |
15 | ||
16 | This program is free software; you can redistribute it and/or modify | |
17 | it under the terms of the GNU General Public License as published by | |
18 | the Free Software Foundation; version 2 of the License. | |
19 | ||
20 | This program is distributed in the hope that it will be useful, | |
21 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | GNU General Public License for more details. | |
24 | ||
25 | NO WARRANTY | |
26 | THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
27 | CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
28 | LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
29 | MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
30 | solely responsible for determining the appropriateness of using and | |
31 | distributing the Program and assumes all risks associated with its | |
32 | exercise of rights under this Agreement, including but not limited to | |
33 | the risks and costs of program errors, damage to or loss of data, | |
34 | programs or equipment, and unavailability or interruption of operations. | |
35 | ||
36 | DISCLAIMER OF LIABILITY | |
37 | NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
38 | DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
39 | DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
40 | ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
41 | TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
42 | USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
43 | HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
44 | ||
45 | You should have received a copy of the GNU General Public License | |
46 | along with this program; if not, write to the Free Software | |
47 | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
48 | ||
49 | Bugs/Comments/Suggestions should be mailed to: | |
4deedd84 | 50 | linuxraid@lsi.com |
1da177e4 LT |
51 | |
52 | For more information, goto: | |
4deedd84 | 53 | http://www.lsi.com |
1da177e4 LT |
54 | |
55 | History | |
56 | ------- | |
57 | 0.1.000 - Initial release. | |
58 | 0.4.000 - Added support for Asynchronous Event Notification through | |
59 | ioctls for 3DM. | |
60 | 1.0.000 - Added DPO & FUA bit support for WRITE_10 & WRITE_6 cdb | |
61 | to disable drive write-cache before writes. | |
62 | 1.1.000 - Fixed performance bug with DPO & FUA not existing for WRITE_6. | |
63 | 1.2.000 - Added support for clean shutdown notification/feature table. | |
64 | 1.02.00.001 - Added support for full command packet posts through ioctls | |
65 | for 3DM. | |
66 | Bug fix so hot spare drives don't show up. | |
67 | 1.02.00.002 - Fix bug with tw_setfeature() call that caused oops on some | |
68 | systems. | |
69 | 08/21/00 - release previously allocated resources on failure at | |
70 | tw_allocate_memory (acme) | |
71 | 1.02.00.003 - Fix tw_interrupt() to report error to scsi layer when | |
72 | controller status is non-zero. | |
73 | Added handling of request_sense opcode. | |
74 | Fix possible null pointer dereference in | |
75 | tw_reset_device_extension() | |
76 | 1.02.00.004 - Add support for device id of 3ware 7000 series controllers. | |
77 | Make tw_setfeature() call with interrupts disabled. | |
78 | Register interrupt handler before enabling interrupts. | |
79 | Clear attention interrupt before draining aen queue. | |
80 | 1.02.00.005 - Allocate bounce buffers and custom queue depth for raid5 for | |
81 | 6000 and 5000 series controllers. | |
82 | Reduce polling mdelays causing problems on some systems. | |
83 | Fix use_sg = 1 calculation bug. | |
84 | Check for scsi_register returning NULL. | |
85 | Add aen count to /proc/scsi/3w-xxxx. | |
86 | Remove aen code unit masking in tw_aen_complete(). | |
87 | 1.02.00.006 - Remove unit from printk in tw_scsi_eh_abort(), causing | |
88 | possible oops. | |
89 | Fix possible null pointer dereference in tw_scsi_queue() | |
90 | if done function pointer was invalid. | |
91 | 1.02.00.007 - Fix possible null pointer dereferences in tw_ioctl(). | |
92 | Remove check for invalid done function pointer from | |
93 | tw_scsi_queue(). | |
94 | 1.02.00.008 - Set max sectors per io to TW_MAX_SECTORS in tw_findcards(). | |
95 | Add tw_decode_error() for printing readable error messages. | |
96 | Print some useful information on certain aen codes. | |
97 | Add tw_decode_bits() for interpreting status register output. | |
98 | Make scsi_set_pci_device() for kernels >= 2.4.4 | |
99 | Fix bug where aen's could be lost before a reset. | |
100 | Re-add spinlocks in tw_scsi_detect(). | |
101 | Fix possible null pointer dereference in tw_aen_drain_queue() | |
102 | during initialization. | |
103 | Clear pci parity errors during initialization and during io. | |
104 | 1.02.00.009 - Remove redundant increment in tw_state_request_start(). | |
105 | Add ioctl support for direct ATA command passthru. | |
106 | Add entire aen code string list. | |
107 | 1.02.00.010 - Cleanup queueing code, fix jbod thoughput. | |
108 | Fix get_param for specific units. | |
109 | 1.02.00.011 - Fix bug in tw_aen_complete() where aen's could be lost. | |
110 | Fix tw_aen_drain_queue() to display useful info at init. | |
111 | Set tw_host->max_id for 12 port cards. | |
112 | Add ioctl support for raw command packet post from userspace | |
113 | with sglist fragments (parameter and io). | |
114 | 1.02.00.012 - Fix read capacity to under report by 1 sector to fix get | |
115 | last sector ioctl. | |
116 | 1.02.00.013 - Fix bug where more AEN codes weren't coming out during | |
117 | driver initialization. | |
118 | Improved handling of PCI aborts. | |
119 | 1.02.00.014 - Fix bug in tw_findcards() where AEN code could be lost. | |
120 | Increase timeout in tw_aen_drain_queue() to 30 seconds. | |
121 | 1.02.00.015 - Re-write raw command post with data ioctl method. | |
122 | Remove raid5 bounce buffers for raid5 for 6XXX for kernel 2.5 | |
123 | Add tw_map/unmap_scsi_sg/single_data() for kernel 2.5 | |
124 | Replace io_request_lock with host_lock for kernel 2.5 | |
125 | Set max_cmd_len to 16 for 3dm for kernel 2.5 | |
126 | 1.02.00.016 - Set host->max_sectors back up to 256. | |
127 | 1.02.00.017 - Modified pci parity error handling/clearing from config space | |
128 | during initialization. | |
129 | 1.02.00.018 - Better handling of request sense opcode and sense information | |
130 | for failed commands. Add tw_decode_sense(). | |
131 | Replace all mdelay()'s with scsi_sleep(). | |
132 | 1.02.00.019 - Revert mdelay's and scsi_sleep's, this caused problems on | |
133 | some SMP systems. | |
134 | 1.02.00.020 - Add pci_set_dma_mask(), rewrite kmalloc()/virt_to_bus() to | |
135 | pci_alloc/free_consistent(). | |
136 | Better alignment checking in tw_allocate_memory(). | |
137 | Cleanup tw_initialize_device_extension(). | |
138 | 1.02.00.021 - Bump cmd_per_lun in SHT to 255 for better jbod performance. | |
139 | Improve handling of errors in tw_interrupt(). | |
140 | Add handling/clearing of controller queue error. | |
141 | Empty stale responses before draining aen queue. | |
142 | Fix tw_scsi_eh_abort() to not reset on every io abort. | |
143 | Set can_queue in SHT to 255 to prevent hang from AEN. | |
144 | 1.02.00.022 - Fix possible null pointer dereference in tw_scsi_release(). | |
145 | 1.02.00.023 - Fix bug in tw_aen_drain_queue() where unit # was always zero. | |
146 | 1.02.00.024 - Add severity levels to AEN strings. | |
147 | 1.02.00.025 - Fix command interrupt spurious error messages. | |
148 | Fix bug in raw command post with data ioctl method. | |
149 | Fix bug where rollcall sometimes failed with cable errors. | |
150 | Print unit # on all command timeouts. | |
151 | 1.02.00.026 - Fix possible infinite retry bug with power glitch induced | |
152 | drive timeouts. | |
153 | Cleanup some AEN severity levels. | |
154 | 1.02.00.027 - Add drive not supported AEN code for SATA controllers. | |
155 | Remove spurious unknown ioctl error message. | |
156 | 1.02.00.028 - Fix bug where multiple controllers with no units were the | |
157 | same card number. | |
158 | Fix bug where cards were being shut down more than once. | |
159 | 1.02.00.029 - Add missing pci_free_consistent() in tw_allocate_memory(). | |
160 | Replace pci_map_single() with pci_map_page() for highmem. | |
161 | Check for tw_setfeature() failure. | |
162 | 1.02.00.030 - Make driver 64-bit clean. | |
163 | 1.02.00.031 - Cleanup polling timeouts/routines in several places. | |
164 | Add support for mode sense opcode. | |
165 | Add support for cache mode page. | |
166 | Add support for synchronize cache opcode. | |
167 | 1.02.00.032 - Fix small multicard rollcall bug. | |
168 | Make driver stay loaded with no units for hot add/swap. | |
169 | Add support for "twe" character device for ioctls. | |
170 | Clean up request_id queueing code. | |
171 | Fix tw_scsi_queue() spinlocks. | |
172 | 1.02.00.033 - Fix tw_aen_complete() to not queue 'queue empty' AEN's. | |
173 | Initialize queues correctly when loading with no valid units. | |
174 | 1.02.00.034 - Fix tw_decode_bits() to handle multiple errors. | |
175 | Add support for user configurable cmd_per_lun. | |
176 | Add support for sht->slave_configure(). | |
177 | 1.02.00.035 - Improve tw_allocate_memory() memory allocation. | |
178 | Fix tw_chrdev_ioctl() to sleep correctly. | |
179 | 1.02.00.036 - Increase character ioctl timeout to 60 seconds. | |
180 | 1.02.00.037 - Fix tw_ioctl() to handle all non-data ATA passthru cmds | |
181 | for 'smartmontools' support. | |
182 | 1.26.00.038 - Roll driver minor version to 26 to denote kernel 2.6. | |
183 | Add support for cmds_per_lun module parameter. | |
184 | 1.26.00.039 - Fix bug in tw_chrdev_ioctl() polling code. | |
185 | Fix data_buffer_length usage in tw_chrdev_ioctl(). | |
186 | Update contact information. | |
187 | 1.26.02.000 - Convert driver to pci_driver format. | |
188 | 1.26.02.001 - Increase max ioctl buffer size to 512 sectors. | |
189 | Make tw_scsi_queue() return 0 for 'Unknown scsi opcode'. | |
190 | Fix tw_remove() to free irq handler/unregister_chrdev() | |
191 | before shutting down card. | |
192 | Change to new 'change_queue_depth' api. | |
193 | Fix 'handled=1' ISR usage, remove bogus IRQ check. | |
4fe48187 AR |
194 | 1.26.02.002 - Free irq handler in __tw_shutdown(). |
195 | Turn on RCD bit for caching mode page. | |
196 | Serialize reset code. | |
4deedd84 | 197 | 1.26.02.003 - Force 60 second timeout default. |
1da177e4 LT |
198 | */ |
199 | ||
200 | #include <linux/module.h> | |
201 | #include <linux/reboot.h> | |
202 | #include <linux/spinlock.h> | |
203 | #include <linux/interrupt.h> | |
204 | #include <linux/moduleparam.h> | |
205 | #include <linux/errno.h> | |
206 | #include <linux/types.h> | |
207 | #include <linux/delay.h> | |
5a0e3ad6 | 208 | #include <linux/gfp.h> |
1da177e4 LT |
209 | #include <linux/pci.h> |
210 | #include <linux/time.h> | |
a12e25bd | 211 | #include <linux/mutex.h> |
1da177e4 LT |
212 | #include <asm/io.h> |
213 | #include <asm/irq.h> | |
214 | #include <asm/uaccess.h> | |
215 | #include <scsi/scsi.h> | |
216 | #include <scsi/scsi_host.h> | |
217 | #include <scsi/scsi_tcq.h> | |
218 | #include <scsi/scsi_cmnd.h> | |
219 | #include "3w-xxxx.h" | |
220 | ||
221 | /* Globals */ | |
4deedd84 | 222 | #define TW_DRIVER_VERSION "1.26.02.003" |
c45d15d2 | 223 | static DEFINE_MUTEX(tw_mutex); |
1da177e4 LT |
224 | static TW_Device_Extension *tw_device_extension_list[TW_MAX_SLOT]; |
225 | static int tw_device_extension_count = 0; | |
226 | static int twe_major = -1; | |
227 | ||
228 | /* Module parameters */ | |
4deedd84 | 229 | MODULE_AUTHOR("LSI"); |
1da177e4 LT |
230 | MODULE_DESCRIPTION("3ware Storage Controller Linux Driver"); |
231 | MODULE_LICENSE("GPL"); | |
232 | MODULE_VERSION(TW_DRIVER_VERSION); | |
233 | ||
234 | /* Function prototypes */ | |
4fe48187 | 235 | static int tw_reset_device_extension(TW_Device_Extension *tw_dev); |
1da177e4 LT |
236 | |
237 | /* Functions */ | |
238 | ||
239 | /* This function will check the status register for unexpected bits */ | |
240 | static int tw_check_bits(u32 status_reg_value) | |
241 | { | |
242 | if ((status_reg_value & TW_STATUS_EXPECTED_BITS) != TW_STATUS_EXPECTED_BITS) { | |
243 | dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): No expected bits (0x%x).\n", status_reg_value); | |
244 | return 1; | |
245 | } | |
246 | if ((status_reg_value & TW_STATUS_UNEXPECTED_BITS) != 0) { | |
247 | dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): Found unexpected bits (0x%x).\n", status_reg_value); | |
248 | return 1; | |
249 | } | |
250 | ||
251 | return 0; | |
252 | } /* End tw_check_bits() */ | |
253 | ||
254 | /* This function will print readable messages from status register errors */ | |
255 | static int tw_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value, int print_host) | |
256 | { | |
257 | char host[16]; | |
258 | ||
259 | dprintk(KERN_WARNING "3w-xxxx: tw_decode_bits()\n"); | |
260 | ||
261 | if (print_host) | |
262 | sprintf(host, " scsi%d:", tw_dev->host->host_no); | |
263 | else | |
264 | host[0] = '\0'; | |
265 | ||
266 | if (status_reg_value & TW_STATUS_PCI_PARITY_ERROR) { | |
267 | printk(KERN_WARNING "3w-xxxx:%s PCI Parity Error: clearing.\n", host); | |
268 | outl(TW_CONTROL_CLEAR_PARITY_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); | |
269 | } | |
270 | ||
271 | if (status_reg_value & TW_STATUS_PCI_ABORT) { | |
272 | printk(KERN_WARNING "3w-xxxx:%s PCI Abort: clearing.\n", host); | |
273 | outl(TW_CONTROL_CLEAR_PCI_ABORT, TW_CONTROL_REG_ADDR(tw_dev)); | |
274 | pci_write_config_word(tw_dev->tw_pci_dev, PCI_STATUS, TW_PCI_CLEAR_PCI_ABORT); | |
275 | } | |
276 | ||
277 | if (status_reg_value & TW_STATUS_QUEUE_ERROR) { | |
278 | printk(KERN_WARNING "3w-xxxx:%s Controller Queue Error: clearing.\n", host); | |
279 | outl(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); | |
280 | } | |
281 | ||
282 | if (status_reg_value & TW_STATUS_SBUF_WRITE_ERROR) { | |
283 | printk(KERN_WARNING "3w-xxxx:%s SBUF Write Error: clearing.\n", host); | |
284 | outl(TW_CONTROL_CLEAR_SBUF_WRITE_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); | |
285 | } | |
286 | ||
287 | if (status_reg_value & TW_STATUS_MICROCONTROLLER_ERROR) { | |
288 | if (tw_dev->reset_print == 0) { | |
289 | printk(KERN_WARNING "3w-xxxx:%s Microcontroller Error: clearing.\n", host); | |
290 | tw_dev->reset_print = 1; | |
291 | } | |
292 | return 1; | |
293 | } | |
294 | ||
295 | return 0; | |
296 | } /* End tw_decode_bits() */ | |
297 | ||
298 | /* This function will poll the status register for a flag */ | |
299 | static int tw_poll_status(TW_Device_Extension *tw_dev, u32 flag, int seconds) | |
300 | { | |
301 | u32 status_reg_value; | |
302 | unsigned long before; | |
303 | int retval = 1; | |
304 | ||
305 | status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); | |
306 | before = jiffies; | |
307 | ||
308 | if (tw_check_bits(status_reg_value)) | |
309 | tw_decode_bits(tw_dev, status_reg_value, 0); | |
310 | ||
311 | while ((status_reg_value & flag) != flag) { | |
312 | status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); | |
313 | ||
314 | if (tw_check_bits(status_reg_value)) | |
315 | tw_decode_bits(tw_dev, status_reg_value, 0); | |
316 | ||
317 | if (time_after(jiffies, before + HZ * seconds)) | |
318 | goto out; | |
319 | ||
320 | msleep(50); | |
321 | } | |
322 | retval = 0; | |
323 | out: | |
324 | return retval; | |
325 | } /* End tw_poll_status() */ | |
326 | ||
327 | /* This function will poll the status register for disappearance of a flag */ | |
328 | static int tw_poll_status_gone(TW_Device_Extension *tw_dev, u32 flag, int seconds) | |
329 | { | |
330 | u32 status_reg_value; | |
331 | unsigned long before; | |
332 | int retval = 1; | |
333 | ||
334 | status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); | |
335 | before = jiffies; | |
336 | ||
337 | if (tw_check_bits(status_reg_value)) | |
338 | tw_decode_bits(tw_dev, status_reg_value, 0); | |
339 | ||
340 | while ((status_reg_value & flag) != 0) { | |
341 | status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); | |
342 | ||
343 | if (tw_check_bits(status_reg_value)) | |
344 | tw_decode_bits(tw_dev, status_reg_value, 0); | |
345 | ||
346 | if (time_after(jiffies, before + HZ * seconds)) | |
347 | goto out; | |
348 | ||
349 | msleep(50); | |
350 | } | |
351 | retval = 0; | |
352 | out: | |
353 | return retval; | |
354 | } /* End tw_poll_status_gone() */ | |
355 | ||
356 | /* This function will attempt to post a command packet to the board */ | |
357 | static int tw_post_command_packet(TW_Device_Extension *tw_dev, int request_id) | |
358 | { | |
359 | u32 status_reg_value; | |
360 | unsigned long command_que_value; | |
361 | ||
362 | dprintk(KERN_NOTICE "3w-xxxx: tw_post_command_packet()\n"); | |
363 | command_que_value = tw_dev->command_packet_physical_address[request_id]; | |
364 | status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); | |
365 | ||
366 | if (tw_check_bits(status_reg_value)) { | |
367 | dprintk(KERN_WARNING "3w-xxxx: tw_post_command_packet(): Unexpected bits.\n"); | |
368 | tw_decode_bits(tw_dev, status_reg_value, 1); | |
369 | } | |
370 | ||
371 | if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) { | |
372 | /* We successfully posted the command packet */ | |
373 | outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev)); | |
374 | tw_dev->state[request_id] = TW_S_POSTED; | |
375 | tw_dev->posted_request_count++; | |
376 | if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) { | |
377 | tw_dev->max_posted_request_count = tw_dev->posted_request_count; | |
378 | } | |
379 | } else { | |
380 | /* Couldn't post the command packet, so we do it in the isr */ | |
381 | if (tw_dev->state[request_id] != TW_S_PENDING) { | |
382 | tw_dev->state[request_id] = TW_S_PENDING; | |
383 | tw_dev->pending_request_count++; | |
384 | if (tw_dev->pending_request_count > tw_dev->max_pending_request_count) { | |
385 | tw_dev->max_pending_request_count = tw_dev->pending_request_count; | |
386 | } | |
387 | tw_dev->pending_queue[tw_dev->pending_tail] = request_id; | |
388 | if (tw_dev->pending_tail == TW_Q_LENGTH-1) { | |
389 | tw_dev->pending_tail = TW_Q_START; | |
390 | } else { | |
391 | tw_dev->pending_tail = tw_dev->pending_tail + 1; | |
392 | } | |
393 | } | |
394 | TW_UNMASK_COMMAND_INTERRUPT(tw_dev); | |
395 | return 1; | |
396 | } | |
397 | return 0; | |
398 | } /* End tw_post_command_packet() */ | |
399 | ||
400 | /* This function will return valid sense buffer information for failed cmds */ | |
401 | static int tw_decode_sense(TW_Device_Extension *tw_dev, int request_id, int fill_sense) | |
402 | { | |
403 | int i; | |
404 | TW_Command *command; | |
405 | ||
406 | dprintk(KERN_WARNING "3w-xxxx: tw_decode_sense()\n"); | |
407 | command = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
408 | ||
409 | printk(KERN_WARNING "3w-xxxx: scsi%d: Command failed: status = 0x%x, flags = 0x%x, unit #%d.\n", tw_dev->host->host_no, command->status, command->flags, TW_UNIT_OUT(command->unit__hostid)); | |
410 | ||
411 | /* Attempt to return intelligent sense information */ | |
412 | if (fill_sense) { | |
413 | if ((command->status == 0xc7) || (command->status == 0xcb)) { | |
6391a113 | 414 | for (i = 0; i < ARRAY_SIZE(tw_sense_table); i++) { |
1da177e4 LT |
415 | if (command->flags == tw_sense_table[i][0]) { |
416 | ||
417 | /* Valid bit and 'current errors' */ | |
418 | tw_dev->srb[request_id]->sense_buffer[0] = (0x1 << 7 | 0x70); | |
419 | ||
420 | /* Sense key */ | |
421 | tw_dev->srb[request_id]->sense_buffer[2] = tw_sense_table[i][1]; | |
422 | ||
423 | /* Additional sense length */ | |
424 | tw_dev->srb[request_id]->sense_buffer[7] = 0xa; /* 10 bytes */ | |
425 | ||
426 | /* Additional sense code */ | |
427 | tw_dev->srb[request_id]->sense_buffer[12] = tw_sense_table[i][2]; | |
428 | ||
429 | /* Additional sense code qualifier */ | |
430 | tw_dev->srb[request_id]->sense_buffer[13] = tw_sense_table[i][3]; | |
431 | ||
432 | tw_dev->srb[request_id]->result = (DID_OK << 16) | (CHECK_CONDITION << 1); | |
433 | return TW_ISR_DONT_RESULT; /* Special case for isr to not over-write result */ | |
434 | } | |
435 | } | |
436 | } | |
437 | ||
438 | /* If no table match, error so we get a reset */ | |
439 | return 1; | |
440 | } | |
441 | ||
442 | return 0; | |
443 | } /* End tw_decode_sense() */ | |
444 | ||
445 | /* This function will report controller error status */ | |
446 | static int tw_check_errors(TW_Device_Extension *tw_dev) | |
447 | { | |
448 | u32 status_reg_value; | |
449 | ||
450 | status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); | |
451 | ||
452 | if (TW_STATUS_ERRORS(status_reg_value) || tw_check_bits(status_reg_value)) { | |
453 | tw_decode_bits(tw_dev, status_reg_value, 0); | |
454 | return 1; | |
455 | } | |
456 | ||
457 | return 0; | |
458 | } /* End tw_check_errors() */ | |
459 | ||
460 | /* This function will empty the response que */ | |
461 | static void tw_empty_response_que(TW_Device_Extension *tw_dev) | |
462 | { | |
463 | u32 status_reg_value, response_que_value; | |
464 | ||
465 | status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); | |
466 | ||
467 | while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) { | |
468 | response_que_value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev)); | |
469 | status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); | |
470 | } | |
471 | } /* End tw_empty_response_que() */ | |
472 | ||
473 | /* This function will free a request_id */ | |
474 | static void tw_state_request_finish(TW_Device_Extension *tw_dev, int request_id) | |
475 | { | |
476 | tw_dev->free_queue[tw_dev->free_tail] = request_id; | |
477 | tw_dev->state[request_id] = TW_S_FINISHED; | |
478 | tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH; | |
479 | } /* End tw_state_request_finish() */ | |
480 | ||
481 | /* This function will assign an available request_id */ | |
482 | static void tw_state_request_start(TW_Device_Extension *tw_dev, int *request_id) | |
483 | { | |
484 | *request_id = tw_dev->free_queue[tw_dev->free_head]; | |
485 | tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH; | |
486 | tw_dev->state[*request_id] = TW_S_STARTED; | |
487 | } /* End tw_state_request_start() */ | |
488 | ||
489 | /* Show some statistics about the card */ | |
ee959b00 TJ |
490 | static ssize_t tw_show_stats(struct device *dev, struct device_attribute *attr, |
491 | char *buf) | |
1da177e4 | 492 | { |
ee959b00 | 493 | struct Scsi_Host *host = class_to_shost(dev); |
1da177e4 LT |
494 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; |
495 | unsigned long flags = 0; | |
496 | ssize_t len; | |
497 | ||
498 | spin_lock_irqsave(tw_dev->host->host_lock, flags); | |
499 | len = snprintf(buf, PAGE_SIZE, "3w-xxxx Driver version: %s\n" | |
500 | "Current commands posted: %4d\n" | |
501 | "Max commands posted: %4d\n" | |
502 | "Current pending commands: %4d\n" | |
503 | "Max pending commands: %4d\n" | |
504 | "Last sgl length: %4d\n" | |
505 | "Max sgl length: %4d\n" | |
506 | "Last sector count: %4d\n" | |
507 | "Max sector count: %4d\n" | |
508 | "SCSI Host Resets: %4d\n" | |
509 | "AEN's: %4d\n", | |
510 | TW_DRIVER_VERSION, | |
511 | tw_dev->posted_request_count, | |
512 | tw_dev->max_posted_request_count, | |
513 | tw_dev->pending_request_count, | |
514 | tw_dev->max_pending_request_count, | |
515 | tw_dev->sgl_entries, | |
516 | tw_dev->max_sgl_entries, | |
517 | tw_dev->sector_count, | |
518 | tw_dev->max_sector_count, | |
519 | tw_dev->num_resets, | |
520 | tw_dev->aen_count); | |
521 | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); | |
522 | return len; | |
523 | } /* End tw_show_stats() */ | |
524 | ||
525 | /* This function will set a devices queue depth */ | |
e881a172 MC |
526 | static int tw_change_queue_depth(struct scsi_device *sdev, int queue_depth, |
527 | int reason) | |
1da177e4 | 528 | { |
e881a172 MC |
529 | if (reason != SCSI_QDEPTH_DEFAULT) |
530 | return -EOPNOTSUPP; | |
531 | ||
1da177e4 LT |
532 | if (queue_depth > TW_Q_LENGTH-2) |
533 | queue_depth = TW_Q_LENGTH-2; | |
534 | scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth); | |
535 | return queue_depth; | |
536 | } /* End tw_change_queue_depth() */ | |
537 | ||
538 | /* Create sysfs 'stats' entry */ | |
ee959b00 | 539 | static struct device_attribute tw_host_stats_attr = { |
1da177e4 LT |
540 | .attr = { |
541 | .name = "stats", | |
542 | .mode = S_IRUGO, | |
543 | }, | |
544 | .show = tw_show_stats | |
545 | }; | |
546 | ||
547 | /* Host attributes initializer */ | |
ee959b00 | 548 | static struct device_attribute *tw_host_attrs[] = { |
1da177e4 LT |
549 | &tw_host_stats_attr, |
550 | NULL, | |
551 | }; | |
552 | ||
553 | /* This function will read the aen queue from the isr */ | |
554 | static int tw_aen_read_queue(TW_Device_Extension *tw_dev, int request_id) | |
555 | { | |
556 | TW_Command *command_packet; | |
557 | TW_Param *param; | |
558 | unsigned long command_que_value; | |
559 | u32 status_reg_value; | |
560 | unsigned long param_value = 0; | |
561 | ||
562 | dprintk(KERN_NOTICE "3w-xxxx: tw_aen_read_queue()\n"); | |
563 | ||
564 | status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); | |
565 | if (tw_check_bits(status_reg_value)) { | |
566 | dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Unexpected bits.\n"); | |
567 | tw_decode_bits(tw_dev, status_reg_value, 1); | |
568 | return 1; | |
569 | } | |
570 | if (tw_dev->command_packet_virtual_address[request_id] == NULL) { | |
571 | printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet virtual address.\n"); | |
572 | return 1; | |
573 | } | |
574 | command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
575 | memset(command_packet, 0, sizeof(TW_Sector)); | |
576 | command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); | |
577 | command_packet->size = 4; | |
578 | command_packet->request_id = request_id; | |
579 | command_packet->status = 0; | |
580 | command_packet->flags = 0; | |
581 | command_packet->byte6.parameter_count = 1; | |
582 | command_que_value = tw_dev->command_packet_physical_address[request_id]; | |
583 | if (command_que_value == 0) { | |
584 | printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet physical address.\n"); | |
585 | return 1; | |
586 | } | |
587 | /* Now setup the param */ | |
588 | if (tw_dev->alignment_virtual_address[request_id] == NULL) { | |
589 | printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment virtual address.\n"); | |
590 | return 1; | |
591 | } | |
592 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; | |
593 | memset(param, 0, sizeof(TW_Sector)); | |
594 | param->table_id = 0x401; /* AEN table */ | |
595 | param->parameter_id = 2; /* Unit code */ | |
596 | param->parameter_size_bytes = 2; | |
597 | param_value = tw_dev->alignment_physical_address[request_id]; | |
598 | if (param_value == 0) { | |
599 | printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment physical address.\n"); | |
600 | return 1; | |
601 | } | |
602 | command_packet->byte8.param.sgl[0].address = param_value; | |
603 | command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); | |
604 | ||
605 | /* Now post the command packet */ | |
606 | if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) { | |
607 | dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post succeeded.\n"); | |
608 | tw_dev->srb[request_id] = NULL; /* Flag internal command */ | |
609 | tw_dev->state[request_id] = TW_S_POSTED; | |
610 | outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev)); | |
611 | } else { | |
612 | printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post failed, will retry.\n"); | |
613 | return 1; | |
614 | } | |
615 | ||
616 | return 0; | |
617 | } /* End tw_aen_read_queue() */ | |
618 | ||
619 | /* This function will complete an aen request from the isr */ | |
620 | static int tw_aen_complete(TW_Device_Extension *tw_dev, int request_id) | |
621 | { | |
622 | TW_Param *param; | |
623 | unsigned short aen; | |
624 | int error = 0, table_max = 0; | |
625 | ||
626 | dprintk(KERN_WARNING "3w-xxxx: tw_aen_complete()\n"); | |
627 | if (tw_dev->alignment_virtual_address[request_id] == NULL) { | |
628 | printk(KERN_WARNING "3w-xxxx: tw_aen_complete(): Bad alignment virtual address.\n"); | |
629 | return 1; | |
630 | } | |
631 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; | |
632 | aen = *(unsigned short *)(param->data); | |
633 | dprintk(KERN_NOTICE "3w-xxxx: tw_aen_complete(): Queue'd code 0x%x\n", aen); | |
634 | ||
635 | /* Print some useful info when certain aen codes come out */ | |
636 | if (aen == 0x0ff) { | |
637 | printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: INFO: AEN queue overflow.\n", tw_dev->host->host_no); | |
638 | } else { | |
6391a113 | 639 | table_max = ARRAY_SIZE(tw_aen_string); |
1da177e4 LT |
640 | if ((aen & 0x0ff) < table_max) { |
641 | if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') { | |
642 | printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s%d.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff], aen >> 8); | |
643 | } else { | |
644 | if (aen != 0x0) | |
645 | printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff]); | |
646 | } | |
647 | } else { | |
648 | printk(KERN_WARNING "3w-xxxx: scsi%d: Received AEN %d.\n", tw_dev->host->host_no, aen); | |
649 | } | |
650 | } | |
651 | if (aen != TW_AEN_QUEUE_EMPTY) { | |
652 | tw_dev->aen_count++; | |
653 | ||
654 | /* Now queue the code */ | |
655 | tw_dev->aen_queue[tw_dev->aen_tail] = aen; | |
656 | if (tw_dev->aen_tail == TW_Q_LENGTH - 1) { | |
657 | tw_dev->aen_tail = TW_Q_START; | |
658 | } else { | |
659 | tw_dev->aen_tail = tw_dev->aen_tail + 1; | |
660 | } | |
661 | if (tw_dev->aen_head == tw_dev->aen_tail) { | |
662 | if (tw_dev->aen_head == TW_Q_LENGTH - 1) { | |
663 | tw_dev->aen_head = TW_Q_START; | |
664 | } else { | |
665 | tw_dev->aen_head = tw_dev->aen_head + 1; | |
666 | } | |
667 | } | |
668 | ||
669 | error = tw_aen_read_queue(tw_dev, request_id); | |
670 | if (error) { | |
671 | printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing AEN.\n", tw_dev->host->host_no); | |
672 | tw_dev->state[request_id] = TW_S_COMPLETED; | |
673 | tw_state_request_finish(tw_dev, request_id); | |
674 | } | |
675 | } else { | |
676 | tw_dev->state[request_id] = TW_S_COMPLETED; | |
677 | tw_state_request_finish(tw_dev, request_id); | |
678 | } | |
679 | ||
680 | return 0; | |
681 | } /* End tw_aen_complete() */ | |
682 | ||
683 | /* This function will drain the aen queue after a soft reset */ | |
684 | static int tw_aen_drain_queue(TW_Device_Extension *tw_dev) | |
685 | { | |
686 | TW_Command *command_packet; | |
687 | TW_Param *param; | |
688 | int request_id = 0; | |
689 | unsigned long command_que_value; | |
690 | unsigned long param_value; | |
691 | TW_Response_Queue response_queue; | |
692 | unsigned short aen; | |
693 | unsigned short aen_code; | |
694 | int finished = 0; | |
695 | int first_reset = 0; | |
696 | int queue = 0; | |
697 | int found = 0, table_max = 0; | |
698 | ||
699 | dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue()\n"); | |
700 | ||
701 | if (tw_poll_status(tw_dev, TW_STATUS_ATTENTION_INTERRUPT | TW_STATUS_MICROCONTROLLER_READY, 30)) { | |
702 | dprintk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): No attention interrupt for card %d.\n", tw_device_extension_count); | |
703 | return 1; | |
704 | } | |
705 | TW_CLEAR_ATTENTION_INTERRUPT(tw_dev); | |
706 | ||
707 | /* Empty response queue */ | |
708 | tw_empty_response_que(tw_dev); | |
709 | ||
710 | /* Initialize command packet */ | |
711 | if (tw_dev->command_packet_virtual_address[request_id] == NULL) { | |
712 | printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet virtual address.\n"); | |
713 | return 1; | |
714 | } | |
715 | command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
716 | memset(command_packet, 0, sizeof(TW_Sector)); | |
717 | command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); | |
718 | command_packet->size = 4; | |
719 | command_packet->request_id = request_id; | |
720 | command_packet->status = 0; | |
721 | command_packet->flags = 0; | |
722 | command_packet->byte6.parameter_count = 1; | |
723 | command_que_value = tw_dev->command_packet_physical_address[request_id]; | |
724 | if (command_que_value == 0) { | |
725 | printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet physical address.\n"); | |
726 | return 1; | |
727 | } | |
728 | ||
729 | /* Now setup the param */ | |
730 | if (tw_dev->alignment_virtual_address[request_id] == NULL) { | |
731 | printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment virtual address.\n"); | |
732 | return 1; | |
733 | } | |
734 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; | |
735 | memset(param, 0, sizeof(TW_Sector)); | |
736 | param->table_id = 0x401; /* AEN table */ | |
737 | param->parameter_id = 2; /* Unit code */ | |
738 | param->parameter_size_bytes = 2; | |
739 | param_value = tw_dev->alignment_physical_address[request_id]; | |
740 | if (param_value == 0) { | |
741 | printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment physical address.\n"); | |
742 | return 1; | |
743 | } | |
744 | command_packet->byte8.param.sgl[0].address = param_value; | |
745 | command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); | |
746 | ||
747 | /* Now drain the controller's aen queue */ | |
748 | do { | |
749 | /* Post command packet */ | |
750 | outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev)); | |
751 | ||
752 | /* Now poll for completion */ | |
753 | if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) { | |
754 | response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev)); | |
755 | request_id = TW_RESID_OUT(response_queue.response_id); | |
756 | ||
757 | if (request_id != 0) { | |
758 | /* Unexpected request id */ | |
759 | printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Unexpected request id.\n"); | |
760 | return 1; | |
761 | } | |
762 | ||
763 | if (command_packet->status != 0) { | |
764 | if (command_packet->flags != TW_AEN_TABLE_UNDEFINED) { | |
765 | /* Bad response */ | |
766 | tw_decode_sense(tw_dev, request_id, 0); | |
767 | return 1; | |
768 | } else { | |
769 | /* We know this is a 3w-1x00, and doesn't support aen's */ | |
770 | return 0; | |
771 | } | |
772 | } | |
773 | ||
774 | /* Now check the aen */ | |
775 | aen = *(unsigned short *)(param->data); | |
776 | aen_code = (aen & 0x0ff); | |
777 | queue = 0; | |
778 | switch (aen_code) { | |
779 | case TW_AEN_QUEUE_EMPTY: | |
780 | dprintk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]); | |
781 | if (first_reset != 1) { | |
782 | return 1; | |
783 | } else { | |
784 | finished = 1; | |
785 | } | |
786 | break; | |
787 | case TW_AEN_SOFT_RESET: | |
788 | if (first_reset == 0) { | |
789 | first_reset = 1; | |
790 | } else { | |
791 | printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]); | |
792 | tw_dev->aen_count++; | |
793 | queue = 1; | |
794 | } | |
795 | break; | |
796 | default: | |
797 | if (aen == 0x0ff) { | |
798 | printk(KERN_WARNING "3w-xxxx: AEN: INFO: AEN queue overflow.\n"); | |
799 | } else { | |
6391a113 | 800 | table_max = ARRAY_SIZE(tw_aen_string); |
1da177e4 LT |
801 | if ((aen & 0x0ff) < table_max) { |
802 | if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') { | |
803 | printk(KERN_WARNING "3w-xxxx: AEN: %s%d.\n", tw_aen_string[aen & 0xff], aen >> 8); | |
804 | } else { | |
805 | printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]); | |
806 | } | |
807 | } else | |
808 | printk(KERN_WARNING "3w-xxxx: Received AEN %d.\n", aen); | |
809 | } | |
810 | tw_dev->aen_count++; | |
811 | queue = 1; | |
812 | } | |
813 | ||
814 | /* Now put the aen on the aen_queue */ | |
815 | if (queue == 1) { | |
816 | tw_dev->aen_queue[tw_dev->aen_tail] = aen; | |
817 | if (tw_dev->aen_tail == TW_Q_LENGTH - 1) { | |
818 | tw_dev->aen_tail = TW_Q_START; | |
819 | } else { | |
820 | tw_dev->aen_tail = tw_dev->aen_tail + 1; | |
821 | } | |
822 | if (tw_dev->aen_head == tw_dev->aen_tail) { | |
823 | if (tw_dev->aen_head == TW_Q_LENGTH - 1) { | |
824 | tw_dev->aen_head = TW_Q_START; | |
825 | } else { | |
826 | tw_dev->aen_head = tw_dev->aen_head + 1; | |
827 | } | |
828 | } | |
829 | } | |
830 | found = 1; | |
831 | } | |
832 | if (found == 0) { | |
833 | printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Response never received.\n"); | |
834 | return 1; | |
835 | } | |
836 | } while (finished == 0); | |
837 | ||
838 | return 0; | |
839 | } /* End tw_aen_drain_queue() */ | |
840 | ||
841 | /* This function will allocate memory */ | |
842 | static int tw_allocate_memory(TW_Device_Extension *tw_dev, int size, int which) | |
843 | { | |
844 | int i; | |
845 | dma_addr_t dma_handle; | |
846 | unsigned long *cpu_addr = NULL; | |
847 | ||
848 | dprintk(KERN_NOTICE "3w-xxxx: tw_allocate_memory()\n"); | |
849 | ||
850 | cpu_addr = pci_alloc_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, &dma_handle); | |
851 | if (cpu_addr == NULL) { | |
852 | printk(KERN_WARNING "3w-xxxx: pci_alloc_consistent() failed.\n"); | |
853 | return 1; | |
854 | } | |
855 | ||
856 | if ((unsigned long)cpu_addr % (tw_dev->tw_pci_dev->device == TW_DEVICE_ID ? TW_ALIGNMENT_6000 : TW_ALIGNMENT_7000)) { | |
857 | printk(KERN_WARNING "3w-xxxx: Couldn't allocate correctly aligned memory.\n"); | |
858 | pci_free_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, cpu_addr, dma_handle); | |
859 | return 1; | |
860 | } | |
861 | ||
862 | memset(cpu_addr, 0, size*TW_Q_LENGTH); | |
863 | ||
864 | for (i=0;i<TW_Q_LENGTH;i++) { | |
865 | switch(which) { | |
866 | case 0: | |
867 | tw_dev->command_packet_physical_address[i] = dma_handle+(i*size); | |
868 | tw_dev->command_packet_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size)); | |
869 | break; | |
870 | case 1: | |
871 | tw_dev->alignment_physical_address[i] = dma_handle+(i*size); | |
872 | tw_dev->alignment_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size)); | |
873 | break; | |
874 | default: | |
875 | printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): case slip in tw_allocate_memory()\n"); | |
876 | return 1; | |
877 | } | |
878 | } | |
879 | ||
880 | return 0; | |
881 | } /* End tw_allocate_memory() */ | |
882 | ||
883 | /* This function handles ioctl for the character device */ | |
f4927c45 | 884 | static long tw_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
1da177e4 LT |
885 | { |
886 | int request_id; | |
887 | dma_addr_t dma_handle; | |
888 | unsigned short tw_aen_code; | |
889 | unsigned long flags; | |
890 | unsigned int data_buffer_length = 0; | |
891 | unsigned long data_buffer_length_adjusted = 0; | |
496ad9aa | 892 | struct inode *inode = file_inode(file); |
1da177e4 LT |
893 | unsigned long *cpu_addr; |
894 | long timeout; | |
895 | TW_New_Ioctl *tw_ioctl; | |
896 | TW_Passthru *passthru; | |
897 | TW_Device_Extension *tw_dev = tw_device_extension_list[iminor(inode)]; | |
898 | int retval = -EFAULT; | |
899 | void __user *argp = (void __user *)arg; | |
900 | ||
901 | dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl()\n"); | |
902 | ||
c45d15d2 | 903 | mutex_lock(&tw_mutex); |
1da177e4 | 904 | /* Only let one of these through at a time */ |
f4927c45 | 905 | if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) { |
c45d15d2 | 906 | mutex_unlock(&tw_mutex); |
1da177e4 | 907 | return -EINTR; |
f4927c45 | 908 | } |
1da177e4 LT |
909 | |
910 | /* First copy down the buffer length */ | |
911 | if (copy_from_user(&data_buffer_length, argp, sizeof(unsigned int))) | |
912 | goto out; | |
913 | ||
914 | /* Check size */ | |
915 | if (data_buffer_length > TW_MAX_IOCTL_SECTORS * 512) { | |
916 | retval = -EINVAL; | |
917 | goto out; | |
918 | } | |
919 | ||
920 | /* Hardware can only do multiple of 512 byte transfers */ | |
921 | data_buffer_length_adjusted = (data_buffer_length + 511) & ~511; | |
922 | ||
923 | /* Now allocate ioctl buf memory */ | |
924 | cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, &dma_handle, GFP_KERNEL); | |
925 | if (cpu_addr == NULL) { | |
926 | retval = -ENOMEM; | |
927 | goto out; | |
928 | } | |
929 | ||
930 | tw_ioctl = (TW_New_Ioctl *)cpu_addr; | |
931 | ||
932 | /* Now copy down the entire ioctl */ | |
933 | if (copy_from_user(tw_ioctl, argp, data_buffer_length + sizeof(TW_New_Ioctl) - 1)) | |
934 | goto out2; | |
935 | ||
936 | passthru = (TW_Passthru *)&tw_ioctl->firmware_command; | |
937 | ||
938 | /* See which ioctl we are doing */ | |
939 | switch (cmd) { | |
940 | case TW_OP_NOP: | |
941 | dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_OP_NOP.\n"); | |
942 | break; | |
943 | case TW_OP_AEN_LISTEN: | |
944 | dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_AEN_LISTEN.\n"); | |
945 | memset(tw_ioctl->data_buffer, 0, data_buffer_length); | |
946 | ||
947 | spin_lock_irqsave(tw_dev->host->host_lock, flags); | |
948 | if (tw_dev->aen_head == tw_dev->aen_tail) { | |
949 | tw_aen_code = TW_AEN_QUEUE_EMPTY; | |
950 | } else { | |
951 | tw_aen_code = tw_dev->aen_queue[tw_dev->aen_head]; | |
952 | if (tw_dev->aen_head == TW_Q_LENGTH - 1) { | |
953 | tw_dev->aen_head = TW_Q_START; | |
954 | } else { | |
955 | tw_dev->aen_head = tw_dev->aen_head + 1; | |
956 | } | |
957 | } | |
958 | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); | |
959 | memcpy(tw_ioctl->data_buffer, &tw_aen_code, sizeof(tw_aen_code)); | |
960 | break; | |
961 | case TW_CMD_PACKET_WITH_DATA: | |
962 | dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_CMD_PACKET_WITH_DATA.\n"); | |
963 | spin_lock_irqsave(tw_dev->host->host_lock, flags); | |
964 | ||
965 | tw_state_request_start(tw_dev, &request_id); | |
966 | ||
967 | /* Flag internal command */ | |
968 | tw_dev->srb[request_id] = NULL; | |
969 | ||
970 | /* Flag chrdev ioctl */ | |
971 | tw_dev->chrdev_request_id = request_id; | |
972 | ||
973 | tw_ioctl->firmware_command.request_id = request_id; | |
974 | ||
975 | /* Load the sg list */ | |
976 | switch (TW_SGL_OUT(tw_ioctl->firmware_command.opcode__sgloffset)) { | |
977 | case 2: | |
978 | tw_ioctl->firmware_command.byte8.param.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1; | |
979 | tw_ioctl->firmware_command.byte8.param.sgl[0].length = data_buffer_length_adjusted; | |
980 | break; | |
981 | case 3: | |
982 | tw_ioctl->firmware_command.byte8.io.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1; | |
983 | tw_ioctl->firmware_command.byte8.io.sgl[0].length = data_buffer_length_adjusted; | |
984 | break; | |
985 | case 5: | |
986 | passthru->sg_list[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1; | |
987 | passthru->sg_list[0].length = data_buffer_length_adjusted; | |
988 | break; | |
989 | } | |
990 | ||
991 | memcpy(tw_dev->command_packet_virtual_address[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command)); | |
992 | ||
993 | /* Now post the command packet to the controller */ | |
994 | tw_post_command_packet(tw_dev, request_id); | |
995 | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); | |
996 | ||
997 | timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ; | |
998 | ||
999 | /* Now wait for the command to complete */ | |
1000 | timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout); | |
1001 | ||
1da177e4 LT |
1002 | /* We timed out, and didn't get an interrupt */ |
1003 | if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) { | |
1004 | /* Now we need to reset the board */ | |
1005 | printk(KERN_WARNING "3w-xxxx: scsi%d: Character ioctl (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, cmd); | |
1006 | retval = -EIO; | |
4fe48187 | 1007 | if (tw_reset_device_extension(tw_dev)) { |
1da177e4 LT |
1008 | printk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): Reset failed for card %d.\n", tw_dev->host->host_no); |
1009 | } | |
1010 | goto out2; | |
1011 | } | |
1012 | ||
1013 | /* Now copy in the command packet response */ | |
1014 | memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virtual_address[request_id], sizeof(TW_Command)); | |
1015 | ||
1016 | /* Now complete the io */ | |
1017 | spin_lock_irqsave(tw_dev->host->host_lock, flags); | |
1018 | tw_dev->posted_request_count--; | |
1019 | tw_dev->state[request_id] = TW_S_COMPLETED; | |
1020 | tw_state_request_finish(tw_dev, request_id); | |
1021 | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); | |
1022 | break; | |
1023 | default: | |
1024 | retval = -ENOTTY; | |
1025 | goto out2; | |
1026 | } | |
1027 | ||
1028 | /* Now copy the response to userspace */ | |
1029 | if (copy_to_user(argp, tw_ioctl, sizeof(TW_New_Ioctl) + data_buffer_length - 1)) | |
1030 | goto out2; | |
1031 | retval = 0; | |
1032 | out2: | |
1033 | /* Now free ioctl buf memory */ | |
1034 | dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, cpu_addr, dma_handle); | |
1035 | out: | |
a12e25bd | 1036 | mutex_unlock(&tw_dev->ioctl_lock); |
c45d15d2 | 1037 | mutex_unlock(&tw_mutex); |
1da177e4 LT |
1038 | return retval; |
1039 | } /* End tw_chrdev_ioctl() */ | |
1040 | ||
1041 | /* This function handles open for the character device */ | |
f2b9857e | 1042 | /* NOTE that this function races with remove. */ |
1da177e4 LT |
1043 | static int tw_chrdev_open(struct inode *inode, struct file *file) |
1044 | { | |
1045 | unsigned int minor_number; | |
1046 | ||
1047 | dprintk(KERN_WARNING "3w-xxxx: tw_ioctl_open()\n"); | |
1048 | ||
1049 | minor_number = iminor(inode); | |
1050 | if (minor_number >= tw_device_extension_count) | |
1051 | return -ENODEV; | |
1052 | ||
1053 | return 0; | |
1054 | } /* End tw_chrdev_open() */ | |
1055 | ||
1056 | /* File operations struct for character device */ | |
00977a59 | 1057 | static const struct file_operations tw_fops = { |
1da177e4 | 1058 | .owner = THIS_MODULE, |
f4927c45 | 1059 | .unlocked_ioctl = tw_chrdev_ioctl, |
1da177e4 | 1060 | .open = tw_chrdev_open, |
6038f373 AB |
1061 | .release = NULL, |
1062 | .llseek = noop_llseek, | |
1da177e4 LT |
1063 | }; |
1064 | ||
1065 | /* This function will free up device extension resources */ | |
1066 | static void tw_free_device_extension(TW_Device_Extension *tw_dev) | |
1067 | { | |
1068 | dprintk(KERN_NOTICE "3w-xxxx: tw_free_device_extension()\n"); | |
1069 | ||
1070 | /* Free command packet and generic buffer memory */ | |
1071 | if (tw_dev->command_packet_virtual_address[0]) | |
1072 | pci_free_consistent(tw_dev->tw_pci_dev, sizeof(TW_Command)*TW_Q_LENGTH, tw_dev->command_packet_virtual_address[0], tw_dev->command_packet_physical_address[0]); | |
1073 | ||
1074 | if (tw_dev->alignment_virtual_address[0]) | |
1075 | pci_free_consistent(tw_dev->tw_pci_dev, sizeof(TW_Sector)*TW_Q_LENGTH, tw_dev->alignment_virtual_address[0], tw_dev->alignment_physical_address[0]); | |
1076 | } /* End tw_free_device_extension() */ | |
1077 | ||
1078 | /* This function will send an initconnection command to controller */ | |
1079 | static int tw_initconnection(TW_Device_Extension *tw_dev, int message_credits) | |
1080 | { | |
1081 | unsigned long command_que_value; | |
1082 | TW_Command *command_packet; | |
1083 | TW_Response_Queue response_queue; | |
1084 | int request_id = 0; | |
1085 | ||
1086 | dprintk(KERN_NOTICE "3w-xxxx: tw_initconnection()\n"); | |
1087 | ||
1088 | /* Initialize InitConnection command packet */ | |
1089 | if (tw_dev->command_packet_virtual_address[request_id] == NULL) { | |
1090 | printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet virtual address.\n"); | |
1091 | return 1; | |
1092 | } | |
1093 | ||
1094 | command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
1095 | memset(command_packet, 0, sizeof(TW_Sector)); | |
1096 | command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_INIT_CONNECTION); | |
1097 | command_packet->size = TW_INIT_COMMAND_PACKET_SIZE; | |
1098 | command_packet->request_id = request_id; | |
1099 | command_packet->status = 0x0; | |
1100 | command_packet->flags = 0x0; | |
1101 | command_packet->byte6.message_credits = message_credits; | |
1102 | command_packet->byte8.init_connection.response_queue_pointer = 0x0; | |
1103 | command_que_value = tw_dev->command_packet_physical_address[request_id]; | |
1104 | ||
1105 | if (command_que_value == 0) { | |
1106 | printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet physical address.\n"); | |
1107 | return 1; | |
1108 | } | |
1109 | ||
1110 | /* Send command packet to the board */ | |
1111 | outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev)); | |
1112 | ||
1113 | /* Poll for completion */ | |
1114 | if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) { | |
1115 | response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev)); | |
1116 | request_id = TW_RESID_OUT(response_queue.response_id); | |
1117 | ||
1118 | if (request_id != 0) { | |
1119 | /* unexpected request id */ | |
1120 | printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Unexpected request id.\n"); | |
1121 | return 1; | |
1122 | } | |
1123 | if (command_packet->status != 0) { | |
1124 | /* bad response */ | |
1125 | tw_decode_sense(tw_dev, request_id, 0); | |
1126 | return 1; | |
1127 | } | |
1128 | } | |
1129 | return 0; | |
1130 | } /* End tw_initconnection() */ | |
1131 | ||
1132 | /* Set a value in the features table */ | |
1133 | static int tw_setfeature(TW_Device_Extension *tw_dev, int parm, int param_size, | |
1134 | unsigned char *val) | |
1135 | { | |
1136 | TW_Param *param; | |
1137 | TW_Command *command_packet; | |
1138 | TW_Response_Queue response_queue; | |
1139 | int request_id = 0; | |
1140 | unsigned long command_que_value; | |
1141 | unsigned long param_value; | |
1142 | ||
1143 | /* Initialize SetParam command packet */ | |
1144 | if (tw_dev->command_packet_virtual_address[request_id] == NULL) { | |
1145 | printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet virtual address.\n"); | |
1146 | return 1; | |
1147 | } | |
1148 | command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
1149 | memset(command_packet, 0, sizeof(TW_Sector)); | |
1150 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; | |
1151 | ||
1152 | command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM); | |
1153 | param->table_id = 0x404; /* Features table */ | |
1154 | param->parameter_id = parm; | |
1155 | param->parameter_size_bytes = param_size; | |
1156 | memcpy(param->data, val, param_size); | |
1157 | ||
1158 | param_value = tw_dev->alignment_physical_address[request_id]; | |
1159 | if (param_value == 0) { | |
1160 | printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad alignment physical address.\n"); | |
1161 | tw_dev->state[request_id] = TW_S_COMPLETED; | |
1162 | tw_state_request_finish(tw_dev, request_id); | |
1163 | tw_dev->srb[request_id]->result = (DID_OK << 16); | |
1164 | tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); | |
1165 | } | |
1166 | command_packet->byte8.param.sgl[0].address = param_value; | |
1167 | command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); | |
1168 | ||
1169 | command_packet->size = 4; | |
1170 | command_packet->request_id = request_id; | |
1171 | command_packet->byte6.parameter_count = 1; | |
1172 | ||
1173 | command_que_value = tw_dev->command_packet_physical_address[request_id]; | |
1174 | if (command_que_value == 0) { | |
1175 | printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet physical address.\n"); | |
1176 | return 1; | |
1177 | } | |
1178 | ||
1179 | /* Send command packet to the board */ | |
1180 | outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev)); | |
1181 | ||
1182 | /* Poll for completion */ | |
1183 | if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) { | |
1184 | response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev)); | |
1185 | request_id = TW_RESID_OUT(response_queue.response_id); | |
1186 | ||
1187 | if (request_id != 0) { | |
1188 | /* unexpected request id */ | |
1189 | printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Unexpected request id.\n"); | |
1190 | return 1; | |
1191 | } | |
1192 | if (command_packet->status != 0) { | |
1193 | /* bad response */ | |
1194 | tw_decode_sense(tw_dev, request_id, 0); | |
1195 | return 1; | |
1196 | } | |
1197 | } | |
1198 | ||
1199 | return 0; | |
1200 | } /* End tw_setfeature() */ | |
1201 | ||
1202 | /* This function will reset a controller */ | |
1203 | static int tw_reset_sequence(TW_Device_Extension *tw_dev) | |
1204 | { | |
1205 | int error = 0; | |
1206 | int tries = 0; | |
1207 | unsigned char c = 1; | |
1208 | ||
1209 | /* Reset the board */ | |
1210 | while (tries < TW_MAX_RESET_TRIES) { | |
1211 | TW_SOFT_RESET(tw_dev); | |
1212 | ||
1213 | error = tw_aen_drain_queue(tw_dev); | |
1214 | if (error) { | |
1215 | printk(KERN_WARNING "3w-xxxx: scsi%d: AEN drain failed, retrying.\n", tw_dev->host->host_no); | |
1216 | tries++; | |
1217 | continue; | |
1218 | } | |
1219 | ||
1220 | /* Check for controller errors */ | |
1221 | if (tw_check_errors(tw_dev)) { | |
1222 | printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors found, retrying.\n", tw_dev->host->host_no); | |
1223 | tries++; | |
1224 | continue; | |
1225 | } | |
1226 | ||
1227 | /* Now the controller is in a good state */ | |
1228 | break; | |
1229 | } | |
1230 | ||
1231 | if (tries >= TW_MAX_RESET_TRIES) { | |
1232 | printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors, card not responding, check all cabling.\n", tw_dev->host->host_no); | |
1233 | return 1; | |
1234 | } | |
1235 | ||
1236 | error = tw_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS); | |
1237 | if (error) { | |
1238 | printk(KERN_WARNING "3w-xxxx: scsi%d: Connection initialization failed.\n", tw_dev->host->host_no); | |
1239 | return 1; | |
1240 | } | |
1241 | ||
1242 | error = tw_setfeature(tw_dev, 2, 1, &c); | |
1243 | if (error) { | |
1244 | printk(KERN_WARNING "3w-xxxx: Unable to set features for card, probable old firmware or card.\n"); | |
1245 | } | |
1246 | ||
1247 | return 0; | |
1248 | } /* End tw_reset_sequence() */ | |
1249 | ||
1250 | /* This function will initialize the fields of a device extension */ | |
1251 | static int tw_initialize_device_extension(TW_Device_Extension *tw_dev) | |
1252 | { | |
1253 | int i, error=0; | |
1254 | ||
1255 | dprintk(KERN_NOTICE "3w-xxxx: tw_initialize_device_extension()\n"); | |
1256 | ||
1257 | /* Initialize command packet buffers */ | |
1258 | error = tw_allocate_memory(tw_dev, sizeof(TW_Command), 0); | |
1259 | if (error) { | |
1260 | printk(KERN_WARNING "3w-xxxx: Command packet memory allocation failed.\n"); | |
1261 | return 1; | |
1262 | } | |
1263 | ||
1264 | /* Initialize generic buffer */ | |
1265 | error = tw_allocate_memory(tw_dev, sizeof(TW_Sector), 1); | |
1266 | if (error) { | |
1267 | printk(KERN_WARNING "3w-xxxx: Generic memory allocation failed.\n"); | |
1268 | return 1; | |
1269 | } | |
1270 | ||
1271 | for (i=0;i<TW_Q_LENGTH;i++) { | |
1272 | tw_dev->free_queue[i] = i; | |
1273 | tw_dev->state[i] = TW_S_INITIAL; | |
1274 | } | |
1275 | ||
1276 | tw_dev->pending_head = TW_Q_START; | |
1277 | tw_dev->pending_tail = TW_Q_START; | |
1278 | tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; | |
1279 | ||
a12e25bd | 1280 | mutex_init(&tw_dev->ioctl_lock); |
1da177e4 LT |
1281 | init_waitqueue_head(&tw_dev->ioctl_wqueue); |
1282 | ||
1283 | return 0; | |
1284 | } /* End tw_initialize_device_extension() */ | |
1285 | ||
1da177e4 | 1286 | /* This function will reset a device extension */ |
4fe48187 | 1287 | static int tw_reset_device_extension(TW_Device_Extension *tw_dev) |
1da177e4 LT |
1288 | { |
1289 | int i = 0; | |
1290 | struct scsi_cmnd *srb; | |
1291 | unsigned long flags = 0; | |
1292 | ||
1293 | dprintk(KERN_NOTICE "3w-xxxx: tw_reset_device_extension()\n"); | |
1294 | ||
1295 | set_bit(TW_IN_RESET, &tw_dev->flags); | |
1296 | TW_DISABLE_INTERRUPTS(tw_dev); | |
1297 | TW_MASK_COMMAND_INTERRUPT(tw_dev); | |
1298 | spin_lock_irqsave(tw_dev->host->host_lock, flags); | |
1299 | ||
1300 | /* Abort all requests that are in progress */ | |
1301 | for (i=0;i<TW_Q_LENGTH;i++) { | |
1302 | if ((tw_dev->state[i] != TW_S_FINISHED) && | |
1303 | (tw_dev->state[i] != TW_S_INITIAL) && | |
1304 | (tw_dev->state[i] != TW_S_COMPLETED)) { | |
1305 | srb = tw_dev->srb[i]; | |
1306 | if (srb != NULL) { | |
1307 | srb->result = (DID_RESET << 16); | |
572a1518 CH |
1308 | scsi_dma_unmap(srb); |
1309 | srb->scsi_done(srb); | |
1da177e4 LT |
1310 | } |
1311 | } | |
1312 | } | |
1313 | ||
1314 | /* Reset queues and counts */ | |
1315 | for (i=0;i<TW_Q_LENGTH;i++) { | |
1316 | tw_dev->free_queue[i] = i; | |
1317 | tw_dev->state[i] = TW_S_INITIAL; | |
1318 | } | |
1319 | tw_dev->free_head = TW_Q_START; | |
1320 | tw_dev->free_tail = TW_Q_START; | |
1321 | tw_dev->posted_request_count = 0; | |
1322 | tw_dev->pending_request_count = 0; | |
1323 | tw_dev->pending_head = TW_Q_START; | |
1324 | tw_dev->pending_tail = TW_Q_START; | |
1325 | tw_dev->reset_print = 0; | |
1326 | ||
1327 | spin_unlock_irqrestore(tw_dev->host->host_lock, flags); | |
1328 | ||
1329 | if (tw_reset_sequence(tw_dev)) { | |
1330 | printk(KERN_WARNING "3w-xxxx: scsi%d: Reset sequence failed.\n", tw_dev->host->host_no); | |
1331 | return 1; | |
1332 | } | |
1da177e4 | 1333 | |
4fe48187 AR |
1334 | TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev); |
1335 | clear_bit(TW_IN_RESET, &tw_dev->flags); | |
1336 | tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; | |
1da177e4 LT |
1337 | |
1338 | return 0; | |
1339 | } /* End tw_reset_device_extension() */ | |
1340 | ||
1341 | /* This funciton returns unit geometry in cylinders/heads/sectors */ | |
1342 | static int tw_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev, | |
1343 | sector_t capacity, int geom[]) | |
1344 | { | |
1345 | int heads, sectors, cylinders; | |
1346 | TW_Device_Extension *tw_dev; | |
1347 | ||
1348 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam()\n"); | |
1349 | tw_dev = (TW_Device_Extension *)sdev->host->hostdata; | |
1350 | ||
1351 | heads = 64; | |
1352 | sectors = 32; | |
1353 | cylinders = sector_div(capacity, heads * sectors); | |
1354 | ||
1355 | if (capacity >= 0x200000) { | |
1356 | heads = 255; | |
1357 | sectors = 63; | |
1358 | cylinders = sector_div(capacity, heads * sectors); | |
1359 | } | |
1360 | ||
1361 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam(): heads = %d, sectors = %d, cylinders = %d\n", heads, sectors, cylinders); | |
1362 | geom[0] = heads; | |
1363 | geom[1] = sectors; | |
1364 | geom[2] = cylinders; | |
1365 | ||
1366 | return 0; | |
1367 | } /* End tw_scsi_biosparam() */ | |
1368 | ||
1369 | /* This is the new scsi eh reset function */ | |
1370 | static int tw_scsi_eh_reset(struct scsi_cmnd *SCpnt) | |
1371 | { | |
1372 | TW_Device_Extension *tw_dev=NULL; | |
1373 | int retval = FAILED; | |
1374 | ||
1375 | tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; | |
1376 | ||
1da177e4 LT |
1377 | tw_dev->num_resets++; |
1378 | ||
017560fc JG |
1379 | sdev_printk(KERN_WARNING, SCpnt->device, |
1380 | "WARNING: Command (0x%x) timed out, resetting card.\n", | |
1381 | SCpnt->cmnd[0]); | |
1da177e4 | 1382 | |
4fe48187 AR |
1383 | /* Make sure we are not issuing an ioctl or resetting from ioctl */ |
1384 | mutex_lock(&tw_dev->ioctl_lock); | |
1385 | ||
1da177e4 | 1386 | /* Now reset the card and some of the device extension data */ |
4fe48187 | 1387 | if (tw_reset_device_extension(tw_dev)) { |
1da177e4 LT |
1388 | printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no); |
1389 | goto out; | |
1390 | } | |
1391 | ||
1392 | retval = SUCCESS; | |
1393 | out: | |
4fe48187 | 1394 | mutex_unlock(&tw_dev->ioctl_lock); |
1da177e4 LT |
1395 | return retval; |
1396 | } /* End tw_scsi_eh_reset() */ | |
1397 | ||
1398 | /* This function handles scsi inquiry commands */ | |
1399 | static int tw_scsiop_inquiry(TW_Device_Extension *tw_dev, int request_id) | |
1400 | { | |
1401 | TW_Param *param; | |
1402 | TW_Command *command_packet; | |
1403 | unsigned long command_que_value; | |
1404 | unsigned long param_value; | |
1405 | ||
1406 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry()\n"); | |
1407 | ||
1408 | /* Initialize command packet */ | |
1409 | command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
1410 | if (command_packet == NULL) { | |
1411 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet virtual address.\n"); | |
1412 | return 1; | |
1413 | } | |
1414 | memset(command_packet, 0, sizeof(TW_Sector)); | |
1415 | command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); | |
1416 | command_packet->size = 4; | |
1417 | command_packet->request_id = request_id; | |
1418 | command_packet->status = 0; | |
1419 | command_packet->flags = 0; | |
1420 | command_packet->byte6.parameter_count = 1; | |
1421 | ||
1422 | /* Now setup the param */ | |
1423 | if (tw_dev->alignment_virtual_address[request_id] == NULL) { | |
1424 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment virtual address.\n"); | |
1425 | return 1; | |
1426 | } | |
1427 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; | |
1428 | memset(param, 0, sizeof(TW_Sector)); | |
1429 | param->table_id = 3; /* unit summary table */ | |
1430 | param->parameter_id = 3; /* unitsstatus parameter */ | |
1431 | param->parameter_size_bytes = TW_MAX_UNITS; | |
1432 | param_value = tw_dev->alignment_physical_address[request_id]; | |
1433 | if (param_value == 0) { | |
1434 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment physical address.\n"); | |
1435 | return 1; | |
1436 | } | |
1437 | ||
1438 | command_packet->byte8.param.sgl[0].address = param_value; | |
1439 | command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); | |
1440 | command_que_value = tw_dev->command_packet_physical_address[request_id]; | |
1441 | if (command_que_value == 0) { | |
1442 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet physical address.\n"); | |
1443 | return 1; | |
1444 | } | |
1445 | ||
1446 | /* Now try to post the command packet */ | |
1447 | tw_post_command_packet(tw_dev, request_id); | |
1448 | ||
1449 | return 0; | |
1450 | } /* End tw_scsiop_inquiry() */ | |
1451 | ||
c9d297c5 JB |
1452 | static void tw_transfer_internal(TW_Device_Extension *tw_dev, int request_id, |
1453 | void *data, unsigned int len) | |
1454 | { | |
0723d4a8 | 1455 | scsi_sg_copy_from_buffer(tw_dev->srb[request_id], data, len); |
c9d297c5 JB |
1456 | } |
1457 | ||
1da177e4 LT |
1458 | /* This function is called by the isr to complete an inquiry command */ |
1459 | static int tw_scsiop_inquiry_complete(TW_Device_Extension *tw_dev, int request_id) | |
1460 | { | |
1461 | unsigned char *is_unit_present; | |
c9d297c5 | 1462 | unsigned char request_buffer[36]; |
1da177e4 LT |
1463 | TW_Param *param; |
1464 | ||
1465 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry_complete()\n"); | |
1466 | ||
c9d297c5 | 1467 | memset(request_buffer, 0, sizeof(request_buffer)); |
1da177e4 LT |
1468 | request_buffer[0] = TYPE_DISK; /* Peripheral device type */ |
1469 | request_buffer[1] = 0; /* Device type modifier */ | |
1470 | request_buffer[2] = 0; /* No ansi/iso compliance */ | |
1471 | request_buffer[4] = 31; /* Additional length */ | |
1472 | memcpy(&request_buffer[8], "3ware ", 8); /* Vendor ID */ | |
1473 | sprintf(&request_buffer[16], "Logical Disk %-2d ", tw_dev->srb[request_id]->device->id); | |
1474 | memcpy(&request_buffer[32], TW_DRIVER_VERSION, 3); | |
c9d297c5 JB |
1475 | tw_transfer_internal(tw_dev, request_id, request_buffer, |
1476 | sizeof(request_buffer)); | |
1da177e4 LT |
1477 | |
1478 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; | |
1479 | if (param == NULL) { | |
1480 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry_complete(): Bad alignment virtual address.\n"); | |
1481 | return 1; | |
1482 | } | |
1483 | is_unit_present = &(param->data[0]); | |
1484 | ||
1485 | if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) { | |
1486 | tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1; | |
1487 | } else { | |
1488 | tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0; | |
1489 | tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16); | |
1490 | return TW_ISR_DONT_RESULT; | |
1491 | } | |
1492 | ||
1493 | return 0; | |
1494 | } /* End tw_scsiop_inquiry_complete() */ | |
1495 | ||
1496 | /* This function handles scsi mode_sense commands */ | |
1497 | static int tw_scsiop_mode_sense(TW_Device_Extension *tw_dev, int request_id) | |
1498 | { | |
1499 | TW_Param *param; | |
1500 | TW_Command *command_packet; | |
1501 | unsigned long command_que_value; | |
1502 | unsigned long param_value; | |
1503 | ||
1504 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense()\n"); | |
1505 | ||
1506 | /* Only page control = 0, page code = 0x8 (cache page) supported */ | |
1507 | if (tw_dev->srb[request_id]->cmnd[2] != 0x8) { | |
1508 | tw_dev->state[request_id] = TW_S_COMPLETED; | |
1509 | tw_state_request_finish(tw_dev, request_id); | |
1510 | tw_dev->srb[request_id]->result = (DID_OK << 16); | |
1511 | tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); | |
1512 | return 0; | |
1513 | } | |
1514 | ||
1515 | /* Now read firmware cache setting for this unit */ | |
1516 | command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
1517 | if (command_packet == NULL) { | |
1518 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet virtual address.\n"); | |
1519 | return 1; | |
1520 | } | |
1521 | ||
1522 | /* Setup the command packet */ | |
1523 | memset(command_packet, 0, sizeof(TW_Sector)); | |
1524 | command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); | |
1525 | command_packet->size = 4; | |
1526 | command_packet->request_id = request_id; | |
1527 | command_packet->status = 0; | |
1528 | command_packet->flags = 0; | |
1529 | command_packet->byte6.parameter_count = 1; | |
1530 | ||
1531 | /* Setup the param */ | |
1532 | if (tw_dev->alignment_virtual_address[request_id] == NULL) { | |
1533 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment virtual address.\n"); | |
1534 | return 1; | |
1535 | } | |
1536 | ||
1537 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; | |
1538 | memset(param, 0, sizeof(TW_Sector)); | |
1539 | param->table_id = TW_UNIT_INFORMATION_TABLE_BASE + tw_dev->srb[request_id]->device->id; | |
1540 | param->parameter_id = 7; /* unit flags */ | |
1541 | param->parameter_size_bytes = 1; | |
1542 | param_value = tw_dev->alignment_physical_address[request_id]; | |
1543 | if (param_value == 0) { | |
1544 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment physical address.\n"); | |
1545 | return 1; | |
1546 | } | |
1547 | ||
1548 | command_packet->byte8.param.sgl[0].address = param_value; | |
1549 | command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); | |
1550 | command_que_value = tw_dev->command_packet_physical_address[request_id]; | |
1551 | if (command_que_value == 0) { | |
1552 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet physical address.\n"); | |
1553 | return 1; | |
1554 | } | |
1555 | ||
1556 | /* Now try to post the command packet */ | |
1557 | tw_post_command_packet(tw_dev, request_id); | |
1558 | ||
1559 | return 0; | |
1560 | } /* End tw_scsiop_mode_sense() */ | |
1561 | ||
1562 | /* This function is called by the isr to complete a mode sense command */ | |
1563 | static int tw_scsiop_mode_sense_complete(TW_Device_Extension *tw_dev, int request_id) | |
1564 | { | |
1565 | TW_Param *param; | |
1566 | unsigned char *flags; | |
c9d297c5 | 1567 | unsigned char request_buffer[8]; |
1da177e4 LT |
1568 | |
1569 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense_complete()\n"); | |
1570 | ||
1571 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; | |
1572 | if (param == NULL) { | |
1573 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense_complete(): Bad alignment virtual address.\n"); | |
1574 | return 1; | |
1575 | } | |
1576 | flags = (char *)&(param->data[0]); | |
c9d297c5 | 1577 | memset(request_buffer, 0, sizeof(request_buffer)); |
1da177e4 LT |
1578 | |
1579 | request_buffer[0] = 0xf; /* mode data length */ | |
1580 | request_buffer[1] = 0; /* default medium type */ | |
1581 | request_buffer[2] = 0x10; /* dpo/fua support on */ | |
1582 | request_buffer[3] = 0; /* no block descriptors */ | |
1583 | request_buffer[4] = 0x8; /* caching page */ | |
1584 | request_buffer[5] = 0xa; /* page length */ | |
1585 | if (*flags & 0x1) | |
4fe48187 | 1586 | request_buffer[6] = 0x5; /* WCE on, RCD on */ |
1da177e4 | 1587 | else |
4fe48187 | 1588 | request_buffer[6] = 0x1; /* WCE off, RCD on */ |
c9d297c5 JB |
1589 | tw_transfer_internal(tw_dev, request_id, request_buffer, |
1590 | sizeof(request_buffer)); | |
1da177e4 LT |
1591 | |
1592 | return 0; | |
1593 | } /* End tw_scsiop_mode_sense_complete() */ | |
1594 | ||
1595 | /* This function handles scsi read_capacity commands */ | |
1596 | static int tw_scsiop_read_capacity(TW_Device_Extension *tw_dev, int request_id) | |
1597 | { | |
1598 | TW_Param *param; | |
1599 | TW_Command *command_packet; | |
1600 | unsigned long command_que_value; | |
1601 | unsigned long param_value; | |
1602 | ||
1603 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity()\n"); | |
1604 | ||
1605 | /* Initialize command packet */ | |
1606 | command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
1607 | ||
1608 | if (command_packet == NULL) { | |
1609 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet virtual address.\n"); | |
1610 | return 1; | |
1611 | } | |
1612 | memset(command_packet, 0, sizeof(TW_Sector)); | |
1613 | command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); | |
1614 | command_packet->size = 4; | |
1615 | command_packet->request_id = request_id; | |
1616 | command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id); | |
1617 | command_packet->status = 0; | |
1618 | command_packet->flags = 0; | |
1619 | command_packet->byte6.block_count = 1; | |
1620 | ||
1621 | /* Now setup the param */ | |
1622 | if (tw_dev->alignment_virtual_address[request_id] == NULL) { | |
1623 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment virtual address.\n"); | |
1624 | return 1; | |
1625 | } | |
1626 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; | |
1627 | memset(param, 0, sizeof(TW_Sector)); | |
1628 | param->table_id = TW_UNIT_INFORMATION_TABLE_BASE + | |
1629 | tw_dev->srb[request_id]->device->id; | |
1630 | param->parameter_id = 4; /* unitcapacity parameter */ | |
1631 | param->parameter_size_bytes = 4; | |
1632 | param_value = tw_dev->alignment_physical_address[request_id]; | |
1633 | if (param_value == 0) { | |
1634 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment physical address.\n"); | |
1635 | return 1; | |
1636 | } | |
1637 | ||
1638 | command_packet->byte8.param.sgl[0].address = param_value; | |
1639 | command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); | |
1640 | command_que_value = tw_dev->command_packet_physical_address[request_id]; | |
1641 | if (command_que_value == 0) { | |
1642 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet physical address.\n"); | |
1643 | return 1; | |
1644 | } | |
1645 | ||
1646 | /* Now try to post the command to the board */ | |
1647 | tw_post_command_packet(tw_dev, request_id); | |
1648 | ||
1649 | return 0; | |
1650 | } /* End tw_scsiop_read_capacity() */ | |
1651 | ||
1652 | /* This function is called by the isr to complete a readcapacity command */ | |
1653 | static int tw_scsiop_read_capacity_complete(TW_Device_Extension *tw_dev, int request_id) | |
1654 | { | |
1655 | unsigned char *param_data; | |
1656 | u32 capacity; | |
c9d297c5 | 1657 | char buff[8]; |
1da177e4 LT |
1658 | TW_Param *param; |
1659 | ||
1660 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete()\n"); | |
1661 | ||
c9d297c5 | 1662 | memset(buff, 0, sizeof(buff)); |
1da177e4 LT |
1663 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; |
1664 | if (param == NULL) { | |
1665 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_capacity_complete(): Bad alignment virtual address.\n"); | |
1666 | return 1; | |
1667 | } | |
1668 | param_data = &(param->data[0]); | |
1669 | ||
1670 | capacity = (param_data[3] << 24) | (param_data[2] << 16) | | |
1671 | (param_data[1] << 8) | param_data[0]; | |
1672 | ||
1673 | /* Subtract one sector to fix get last sector ioctl */ | |
1674 | capacity -= 1; | |
1675 | ||
1676 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete(): Capacity = 0x%x.\n", capacity); | |
1677 | ||
1678 | /* Number of LBA's */ | |
1679 | buff[0] = (capacity >> 24); | |
1680 | buff[1] = (capacity >> 16) & 0xff; | |
1681 | buff[2] = (capacity >> 8) & 0xff; | |
1682 | buff[3] = capacity & 0xff; | |
1683 | ||
1684 | /* Block size in bytes (512) */ | |
1685 | buff[4] = (TW_BLOCK_SIZE >> 24); | |
1686 | buff[5] = (TW_BLOCK_SIZE >> 16) & 0xff; | |
1687 | buff[6] = (TW_BLOCK_SIZE >> 8) & 0xff; | |
1688 | buff[7] = TW_BLOCK_SIZE & 0xff; | |
1689 | ||
c9d297c5 JB |
1690 | tw_transfer_internal(tw_dev, request_id, buff, sizeof(buff)); |
1691 | ||
1da177e4 LT |
1692 | return 0; |
1693 | } /* End tw_scsiop_read_capacity_complete() */ | |
1694 | ||
1695 | /* This function handles scsi read or write commands */ | |
1696 | static int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id) | |
1697 | { | |
1698 | TW_Command *command_packet; | |
1699 | unsigned long command_que_value; | |
6edae708 | 1700 | u32 lba = 0x0, num_sectors = 0x0; |
1da177e4 LT |
1701 | int i, use_sg; |
1702 | struct scsi_cmnd *srb; | |
6edae708 | 1703 | struct scatterlist *sglist, *sg; |
1da177e4 LT |
1704 | |
1705 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write()\n"); | |
1706 | ||
6edae708 FT |
1707 | srb = tw_dev->srb[request_id]; |
1708 | ||
1709 | sglist = scsi_sglist(srb); | |
1710 | if (!sglist) { | |
1da177e4 LT |
1711 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Request buffer NULL.\n"); |
1712 | return 1; | |
1713 | } | |
1da177e4 LT |
1714 | |
1715 | /* Initialize command packet */ | |
1716 | command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
1717 | if (command_packet == NULL) { | |
1718 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): Bad command packet virtual address.\n"); | |
1719 | return 1; | |
1720 | } | |
1721 | ||
1722 | if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == READ_10) { | |
1723 | command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_READ); | |
1724 | } else { | |
1725 | command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_WRITE); | |
1726 | } | |
1727 | ||
1728 | command_packet->size = 3; | |
1729 | command_packet->request_id = request_id; | |
1730 | command_packet->unit__hostid = TW_UNITHOST_IN(0, srb->device->id); | |
1731 | command_packet->status = 0; | |
1732 | command_packet->flags = 0; | |
1733 | ||
1734 | if (srb->cmnd[0] == WRITE_10) { | |
1735 | if ((srb->cmnd[1] & 0x8) || (srb->cmnd[1] & 0x10)) | |
1736 | command_packet->flags = 1; | |
1737 | } | |
1738 | ||
1739 | if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == WRITE_6) { | |
1740 | lba = ((u32)srb->cmnd[1] << 16) | ((u32)srb->cmnd[2] << 8) | (u32)srb->cmnd[3]; | |
1741 | num_sectors = (u32)srb->cmnd[4]; | |
1742 | } else { | |
1743 | lba = ((u32)srb->cmnd[2] << 24) | ((u32)srb->cmnd[3] << 16) | ((u32)srb->cmnd[4] << 8) | (u32)srb->cmnd[5]; | |
1744 | num_sectors = (u32)srb->cmnd[8] | ((u32)srb->cmnd[7] << 8); | |
1745 | } | |
1746 | ||
1747 | /* Update sector statistic */ | |
1748 | tw_dev->sector_count = num_sectors; | |
1749 | if (tw_dev->sector_count > tw_dev->max_sector_count) | |
1750 | tw_dev->max_sector_count = tw_dev->sector_count; | |
1751 | ||
1752 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): lba = 0x%x num_sectors = 0x%x\n", lba, num_sectors); | |
1753 | command_packet->byte8.io.lba = lba; | |
1754 | command_packet->byte6.block_count = num_sectors; | |
1755 | ||
572a1518 CH |
1756 | use_sg = scsi_dma_map(srb); |
1757 | if (use_sg <= 0) | |
6edae708 | 1758 | return 1; |
1da177e4 | 1759 | |
6edae708 FT |
1760 | scsi_for_each_sg(tw_dev->srb[request_id], sg, use_sg, i) { |
1761 | command_packet->byte8.io.sgl[i].address = sg_dma_address(sg); | |
1762 | command_packet->byte8.io.sgl[i].length = sg_dma_len(sg); | |
1da177e4 LT |
1763 | command_packet->size+=2; |
1764 | } | |
1765 | ||
1da177e4 | 1766 | /* Update SG statistics */ |
6edae708 | 1767 | tw_dev->sgl_entries = scsi_sg_count(tw_dev->srb[request_id]); |
1da177e4 LT |
1768 | if (tw_dev->sgl_entries > tw_dev->max_sgl_entries) |
1769 | tw_dev->max_sgl_entries = tw_dev->sgl_entries; | |
1770 | ||
1771 | command_que_value = tw_dev->command_packet_physical_address[request_id]; | |
1772 | if (command_que_value == 0) { | |
1773 | dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Bad command packet physical address.\n"); | |
1774 | return 1; | |
1775 | } | |
1776 | ||
1777 | /* Now try to post the command to the board */ | |
1778 | tw_post_command_packet(tw_dev, request_id); | |
1779 | ||
1780 | return 0; | |
1781 | } /* End tw_scsiop_read_write() */ | |
1782 | ||
1783 | /* This function will handle the request sense scsi command */ | |
1784 | static int tw_scsiop_request_sense(TW_Device_Extension *tw_dev, int request_id) | |
1785 | { | |
6e3b2bbb JB |
1786 | char request_buffer[18]; |
1787 | ||
1da177e4 LT |
1788 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_request_sense()\n"); |
1789 | ||
6e3b2bbb JB |
1790 | memset(request_buffer, 0, sizeof(request_buffer)); |
1791 | request_buffer[0] = 0x70; /* Immediate fixed format */ | |
1792 | request_buffer[7] = 10; /* minimum size per SPC: 18 bytes */ | |
1793 | /* leave all other fields zero, giving effectively NO_SENSE return */ | |
1794 | tw_transfer_internal(tw_dev, request_id, request_buffer, | |
1795 | sizeof(request_buffer)); | |
1796 | ||
1da177e4 LT |
1797 | tw_dev->state[request_id] = TW_S_COMPLETED; |
1798 | tw_state_request_finish(tw_dev, request_id); | |
1799 | ||
1800 | /* If we got a request_sense, we probably want a reset, return error */ | |
1801 | tw_dev->srb[request_id]->result = (DID_ERROR << 16); | |
1802 | tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); | |
1803 | ||
1804 | return 0; | |
1805 | } /* End tw_scsiop_request_sense() */ | |
1806 | ||
1807 | /* This function will handle synchronize cache scsi command */ | |
1808 | static int tw_scsiop_synchronize_cache(TW_Device_Extension *tw_dev, int request_id) | |
1809 | { | |
1810 | TW_Command *command_packet; | |
1811 | unsigned long command_que_value; | |
1812 | ||
1813 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_synchronize_cache()\n"); | |
1814 | ||
1815 | /* Send firmware flush command for this unit */ | |
1816 | command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
1817 | if (command_packet == NULL) { | |
1818 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet virtual address.\n"); | |
1819 | return 1; | |
1820 | } | |
1821 | ||
1822 | /* Setup the command packet */ | |
1823 | memset(command_packet, 0, sizeof(TW_Sector)); | |
1824 | command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_FLUSH_CACHE); | |
1825 | command_packet->size = 2; | |
1826 | command_packet->request_id = request_id; | |
1827 | command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id); | |
1828 | command_packet->status = 0; | |
1829 | command_packet->flags = 0; | |
1830 | command_packet->byte6.parameter_count = 1; | |
1831 | command_que_value = tw_dev->command_packet_physical_address[request_id]; | |
1832 | if (command_que_value == 0) { | |
1833 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet physical address.\n"); | |
1834 | return 1; | |
1835 | } | |
1836 | ||
1837 | /* Now try to post the command packet */ | |
1838 | tw_post_command_packet(tw_dev, request_id); | |
1839 | ||
1840 | return 0; | |
1841 | } /* End tw_scsiop_synchronize_cache() */ | |
1842 | ||
1843 | /* This function will handle test unit ready scsi command */ | |
1844 | static int tw_scsiop_test_unit_ready(TW_Device_Extension *tw_dev, int request_id) | |
1845 | { | |
1846 | TW_Param *param; | |
1847 | TW_Command *command_packet; | |
1848 | unsigned long command_que_value; | |
1849 | unsigned long param_value; | |
1850 | ||
1851 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_test_unit_ready()\n"); | |
1852 | ||
1853 | /* Initialize command packet */ | |
1854 | command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
1855 | if (command_packet == NULL) { | |
1856 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet virtual address.\n"); | |
1857 | return 1; | |
1858 | } | |
1859 | memset(command_packet, 0, sizeof(TW_Sector)); | |
1860 | command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM); | |
1861 | command_packet->size = 4; | |
1862 | command_packet->request_id = request_id; | |
1863 | command_packet->status = 0; | |
1864 | command_packet->flags = 0; | |
1865 | command_packet->byte6.parameter_count = 1; | |
1866 | ||
1867 | /* Now setup the param */ | |
1868 | if (tw_dev->alignment_virtual_address[request_id] == NULL) { | |
1869 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment virtual address.\n"); | |
1870 | return 1; | |
1871 | } | |
1872 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; | |
1873 | memset(param, 0, sizeof(TW_Sector)); | |
1874 | param->table_id = 3; /* unit summary table */ | |
1875 | param->parameter_id = 3; /* unitsstatus parameter */ | |
1876 | param->parameter_size_bytes = TW_MAX_UNITS; | |
1877 | param_value = tw_dev->alignment_physical_address[request_id]; | |
1878 | if (param_value == 0) { | |
1879 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment physical address.\n"); | |
1880 | return 1; | |
1881 | } | |
1882 | ||
1883 | command_packet->byte8.param.sgl[0].address = param_value; | |
1884 | command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector); | |
1885 | command_que_value = tw_dev->command_packet_physical_address[request_id]; | |
1886 | if (command_que_value == 0) { | |
1887 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet physical address.\n"); | |
1888 | return 1; | |
1889 | } | |
1890 | ||
1891 | /* Now try to post the command packet */ | |
1892 | tw_post_command_packet(tw_dev, request_id); | |
1893 | ||
1894 | return 0; | |
1895 | } /* End tw_scsiop_test_unit_ready() */ | |
1896 | ||
1897 | /* This function is called by the isr to complete a testunitready command */ | |
1898 | static int tw_scsiop_test_unit_ready_complete(TW_Device_Extension *tw_dev, int request_id) | |
1899 | { | |
1900 | unsigned char *is_unit_present; | |
1901 | TW_Param *param; | |
1902 | ||
1903 | dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete()\n"); | |
1904 | ||
1905 | param = (TW_Param *)tw_dev->alignment_virtual_address[request_id]; | |
1906 | if (param == NULL) { | |
1907 | printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete(): Bad alignment virtual address.\n"); | |
1908 | return 1; | |
1909 | } | |
1910 | is_unit_present = &(param->data[0]); | |
1911 | ||
1912 | if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) { | |
1913 | tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1; | |
1914 | } else { | |
1915 | tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0; | |
1916 | tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16); | |
1917 | return TW_ISR_DONT_RESULT; | |
1918 | } | |
1919 | ||
1920 | return 0; | |
1921 | } /* End tw_scsiop_test_unit_ready_complete() */ | |
1922 | ||
1923 | /* This is the main scsi queue function to handle scsi opcodes */ | |
f281233d | 1924 | static int tw_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) |
1da177e4 LT |
1925 | { |
1926 | unsigned char *command = SCpnt->cmnd; | |
1927 | int request_id = 0; | |
1928 | int retval = 1; | |
1929 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata; | |
1930 | ||
4fe48187 AR |
1931 | /* If we are resetting due to timed out ioctl, report as busy */ |
1932 | if (test_bit(TW_IN_RESET, &tw_dev->flags)) | |
1933 | return SCSI_MLQUEUE_HOST_BUSY; | |
1934 | ||
1da177e4 LT |
1935 | /* Save done function into Scsi_Cmnd struct */ |
1936 | SCpnt->scsi_done = done; | |
1937 | ||
1938 | /* Queue the command and get a request id */ | |
1939 | tw_state_request_start(tw_dev, &request_id); | |
1940 | ||
1941 | /* Save the scsi command for use by the ISR */ | |
1942 | tw_dev->srb[request_id] = SCpnt; | |
1943 | ||
1da177e4 LT |
1944 | switch (*command) { |
1945 | case READ_10: | |
1946 | case READ_6: | |
1947 | case WRITE_10: | |
1948 | case WRITE_6: | |
1949 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ/WRITE.\n"); | |
1950 | retval = tw_scsiop_read_write(tw_dev, request_id); | |
1951 | break; | |
1952 | case TEST_UNIT_READY: | |
1953 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught TEST_UNIT_READY.\n"); | |
1954 | retval = tw_scsiop_test_unit_ready(tw_dev, request_id); | |
1955 | break; | |
1956 | case INQUIRY: | |
1957 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught INQUIRY.\n"); | |
1958 | retval = tw_scsiop_inquiry(tw_dev, request_id); | |
1959 | break; | |
1960 | case READ_CAPACITY: | |
1961 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ_CAPACITY.\n"); | |
1962 | retval = tw_scsiop_read_capacity(tw_dev, request_id); | |
1963 | break; | |
1964 | case REQUEST_SENSE: | |
1965 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught REQUEST_SENSE.\n"); | |
1966 | retval = tw_scsiop_request_sense(tw_dev, request_id); | |
1967 | break; | |
1968 | case MODE_SENSE: | |
1969 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught MODE_SENSE.\n"); | |
1970 | retval = tw_scsiop_mode_sense(tw_dev, request_id); | |
1971 | break; | |
1972 | case SYNCHRONIZE_CACHE: | |
1973 | dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught SYNCHRONIZE_CACHE.\n"); | |
1974 | retval = tw_scsiop_synchronize_cache(tw_dev, request_id); | |
1975 | break; | |
1976 | case TW_IOCTL: | |
1977 | printk(KERN_WARNING "3w-xxxx: SCSI_IOCTL_SEND_COMMAND deprecated, please update your 3ware tools.\n"); | |
1978 | break; | |
1979 | default: | |
1980 | printk(KERN_NOTICE "3w-xxxx: scsi%d: Unknown scsi opcode: 0x%x\n", tw_dev->host->host_no, *command); | |
1981 | tw_dev->state[request_id] = TW_S_COMPLETED; | |
1982 | tw_state_request_finish(tw_dev, request_id); | |
1983 | SCpnt->result = (DID_BAD_TARGET << 16); | |
1984 | done(SCpnt); | |
1985 | retval = 0; | |
1986 | } | |
1987 | if (retval) { | |
1988 | tw_dev->state[request_id] = TW_S_COMPLETED; | |
1989 | tw_state_request_finish(tw_dev, request_id); | |
1990 | SCpnt->result = (DID_ERROR << 16); | |
1991 | done(SCpnt); | |
1992 | retval = 0; | |
1993 | } | |
1994 | return retval; | |
1995 | } /* End tw_scsi_queue() */ | |
1996 | ||
f281233d JG |
1997 | static DEF_SCSI_QCMD(tw_scsi_queue) |
1998 | ||
1da177e4 | 1999 | /* This function is the interrupt service routine */ |
7d12e780 | 2000 | static irqreturn_t tw_interrupt(int irq, void *dev_instance) |
1da177e4 LT |
2001 | { |
2002 | int request_id; | |
2003 | u32 status_reg_value; | |
2004 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance; | |
2005 | TW_Response_Queue response_que; | |
2006 | int error = 0, retval = 0; | |
2007 | TW_Command *command_packet; | |
2008 | int handled = 0; | |
2009 | ||
2010 | /* Get the host lock for io completions */ | |
2011 | spin_lock(tw_dev->host->host_lock); | |
2012 | ||
2013 | /* Read the registers */ | |
2014 | status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); | |
2015 | ||
2016 | /* Check if this is our interrupt, otherwise bail */ | |
2017 | if (!(status_reg_value & TW_STATUS_VALID_INTERRUPT)) | |
2018 | goto tw_interrupt_bail; | |
2019 | ||
2020 | handled = 1; | |
2021 | ||
4fe48187 AR |
2022 | /* If we are resetting, bail */ |
2023 | if (test_bit(TW_IN_RESET, &tw_dev->flags)) | |
2024 | goto tw_interrupt_bail; | |
2025 | ||
1da177e4 LT |
2026 | /* Check controller for errors */ |
2027 | if (tw_check_bits(status_reg_value)) { | |
2028 | dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n"); | |
2029 | if (tw_decode_bits(tw_dev, status_reg_value, 1)) { | |
2030 | TW_CLEAR_ALL_INTERRUPTS(tw_dev); | |
2031 | goto tw_interrupt_bail; | |
2032 | } | |
2033 | } | |
2034 | ||
2035 | /* Handle host interrupt */ | |
2036 | if (status_reg_value & TW_STATUS_HOST_INTERRUPT) { | |
2037 | dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received host interrupt.\n"); | |
2038 | TW_CLEAR_HOST_INTERRUPT(tw_dev); | |
2039 | } | |
2040 | ||
2041 | /* Handle attention interrupt */ | |
2042 | if (status_reg_value & TW_STATUS_ATTENTION_INTERRUPT) { | |
2043 | dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received attention interrupt.\n"); | |
2044 | TW_CLEAR_ATTENTION_INTERRUPT(tw_dev); | |
2045 | tw_state_request_start(tw_dev, &request_id); | |
2046 | error = tw_aen_read_queue(tw_dev, request_id); | |
2047 | if (error) { | |
2048 | printk(KERN_WARNING "3w-xxxx: scsi%d: Error reading aen queue.\n", tw_dev->host->host_no); | |
2049 | tw_dev->state[request_id] = TW_S_COMPLETED; | |
2050 | tw_state_request_finish(tw_dev, request_id); | |
2051 | } | |
2052 | } | |
2053 | ||
2054 | /* Handle command interrupt */ | |
2055 | if (status_reg_value & TW_STATUS_COMMAND_INTERRUPT) { | |
2056 | /* Drain as many pending commands as we can */ | |
2057 | while (tw_dev->pending_request_count > 0) { | |
2058 | request_id = tw_dev->pending_queue[tw_dev->pending_head]; | |
2059 | if (tw_dev->state[request_id] != TW_S_PENDING) { | |
2060 | printk(KERN_WARNING "3w-xxxx: scsi%d: Found request id that wasn't pending.\n", tw_dev->host->host_no); | |
2061 | break; | |
2062 | } | |
2063 | if (tw_post_command_packet(tw_dev, request_id)==0) { | |
2064 | if (tw_dev->pending_head == TW_Q_LENGTH-1) { | |
2065 | tw_dev->pending_head = TW_Q_START; | |
2066 | } else { | |
2067 | tw_dev->pending_head = tw_dev->pending_head + 1; | |
2068 | } | |
2069 | tw_dev->pending_request_count--; | |
2070 | } else { | |
2071 | /* If we get here, we will continue re-posting on the next command interrupt */ | |
2072 | break; | |
2073 | } | |
2074 | } | |
2075 | /* If there are no more pending requests, we mask command interrupt */ | |
2076 | if (tw_dev->pending_request_count == 0) | |
2077 | TW_MASK_COMMAND_INTERRUPT(tw_dev); | |
2078 | } | |
2079 | ||
2080 | /* Handle response interrupt */ | |
2081 | if (status_reg_value & TW_STATUS_RESPONSE_INTERRUPT) { | |
2082 | /* Drain the response queue from the board */ | |
2083 | while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) { | |
2084 | /* Read response queue register */ | |
2085 | response_que.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev)); | |
2086 | request_id = TW_RESID_OUT(response_que.response_id); | |
2087 | command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; | |
2088 | error = 0; | |
2089 | ||
2090 | /* Check for bad response */ | |
2091 | if (command_packet->status != 0) { | |
2092 | /* If internal command, don't error, don't fill sense */ | |
2093 | if (tw_dev->srb[request_id] == NULL) { | |
2094 | tw_decode_sense(tw_dev, request_id, 0); | |
2095 | } else { | |
2096 | error = tw_decode_sense(tw_dev, request_id, 1); | |
2097 | } | |
2098 | } | |
2099 | ||
2100 | /* Check for correct state */ | |
2101 | if (tw_dev->state[request_id] != TW_S_POSTED) { | |
2102 | if (tw_dev->srb[request_id] != NULL) { | |
2103 | printk(KERN_WARNING "3w-xxxx: scsi%d: Received a request id that wasn't posted.\n", tw_dev->host->host_no); | |
2104 | error = 1; | |
2105 | } | |
2106 | } | |
2107 | ||
2108 | dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Response queue request id: %d.\n", request_id); | |
2109 | ||
2110 | /* Check for internal command completion */ | |
2111 | if (tw_dev->srb[request_id] == NULL) { | |
2112 | dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Found internally posted command.\n"); | |
2113 | /* Check for chrdev ioctl completion */ | |
2114 | if (request_id != tw_dev->chrdev_request_id) { | |
2115 | retval = tw_aen_complete(tw_dev, request_id); | |
2116 | if (retval) { | |
2117 | printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing aen.\n", tw_dev->host->host_no); | |
2118 | } | |
2119 | } else { | |
2120 | tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE; | |
2121 | wake_up(&tw_dev->ioctl_wqueue); | |
2122 | } | |
2123 | } else { | |
2124 | switch (tw_dev->srb[request_id]->cmnd[0]) { | |
2125 | case READ_10: | |
2126 | case READ_6: | |
2127 | dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_10/READ_6\n"); | |
2128 | break; | |
2129 | case WRITE_10: | |
2130 | case WRITE_6: | |
2131 | dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught WRITE_10/WRITE_6\n"); | |
2132 | break; | |
2133 | case TEST_UNIT_READY: | |
2134 | dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught TEST_UNIT_READY\n"); | |
2135 | error = tw_scsiop_test_unit_ready_complete(tw_dev, request_id); | |
2136 | break; | |
2137 | case INQUIRY: | |
2138 | dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught INQUIRY\n"); | |
2139 | error = tw_scsiop_inquiry_complete(tw_dev, request_id); | |
2140 | break; | |
2141 | case READ_CAPACITY: | |
2142 | dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_CAPACITY\n"); | |
2143 | error = tw_scsiop_read_capacity_complete(tw_dev, request_id); | |
2144 | break; | |
2145 | case MODE_SENSE: | |
2146 | dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught MODE_SENSE\n"); | |
2147 | error = tw_scsiop_mode_sense_complete(tw_dev, request_id); | |
2148 | break; | |
2149 | case SYNCHRONIZE_CACHE: | |
2150 | dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught SYNCHRONIZE_CACHE\n"); | |
2151 | break; | |
2152 | default: | |
2153 | printk(KERN_WARNING "3w-xxxx: case slip in tw_interrupt()\n"); | |
2154 | error = 1; | |
2155 | } | |
2156 | ||
2157 | /* If no error command was a success */ | |
2158 | if (error == 0) { | |
2159 | tw_dev->srb[request_id]->result = (DID_OK << 16); | |
2160 | } | |
2161 | ||
2162 | /* If error, command failed */ | |
2163 | if (error == 1) { | |
2164 | /* Ask for a host reset */ | |
2165 | tw_dev->srb[request_id]->result = (DID_OK << 16) | (CHECK_CONDITION << 1); | |
2166 | } | |
2167 | ||
2168 | /* Now complete the io */ | |
2169 | if ((error != TW_ISR_DONT_COMPLETE)) { | |
572a1518 CH |
2170 | scsi_dma_unmap(tw_dev->srb[request_id]); |
2171 | tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]); | |
1da177e4 LT |
2172 | tw_dev->state[request_id] = TW_S_COMPLETED; |
2173 | tw_state_request_finish(tw_dev, request_id); | |
2174 | tw_dev->posted_request_count--; | |
1da177e4 LT |
2175 | } |
2176 | } | |
2177 | ||
2178 | /* Check for valid status after each drain */ | |
2179 | status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev)); | |
2180 | if (tw_check_bits(status_reg_value)) { | |
2181 | dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n"); | |
2182 | if (tw_decode_bits(tw_dev, status_reg_value, 1)) { | |
2183 | TW_CLEAR_ALL_INTERRUPTS(tw_dev); | |
2184 | goto tw_interrupt_bail; | |
2185 | } | |
2186 | } | |
2187 | } | |
2188 | } | |
2189 | ||
2190 | tw_interrupt_bail: | |
2191 | spin_unlock(tw_dev->host->host_lock); | |
2192 | return IRQ_RETVAL(handled); | |
2193 | } /* End tw_interrupt() */ | |
2194 | ||
2195 | /* This function tells the controller to shut down */ | |
2196 | static void __tw_shutdown(TW_Device_Extension *tw_dev) | |
2197 | { | |
2198 | /* Disable interrupts */ | |
2199 | TW_DISABLE_INTERRUPTS(tw_dev); | |
2200 | ||
4fe48187 AR |
2201 | /* Free up the IRQ */ |
2202 | free_irq(tw_dev->tw_pci_dev->irq, tw_dev); | |
2203 | ||
1da177e4 LT |
2204 | printk(KERN_WARNING "3w-xxxx: Shutting down host %d.\n", tw_dev->host->host_no); |
2205 | ||
2206 | /* Tell the card we are shutting down */ | |
2207 | if (tw_initconnection(tw_dev, 1)) { | |
2208 | printk(KERN_WARNING "3w-xxxx: Connection shutdown failed.\n"); | |
2209 | } else { | |
2210 | printk(KERN_WARNING "3w-xxxx: Shutdown complete.\n"); | |
2211 | } | |
2212 | ||
2213 | /* Clear all interrupts just before exit */ | |
2214 | TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev); | |
2215 | } /* End __tw_shutdown() */ | |
2216 | ||
2217 | /* Wrapper for __tw_shutdown */ | |
d18c3db5 | 2218 | static void tw_shutdown(struct pci_dev *pdev) |
1da177e4 | 2219 | { |
d18c3db5 | 2220 | struct Scsi_Host *host = pci_get_drvdata(pdev); |
1da177e4 LT |
2221 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; |
2222 | ||
2223 | __tw_shutdown(tw_dev); | |
2224 | } /* End tw_shutdown() */ | |
2225 | ||
4deedd84 AR |
2226 | /* This function gets called when a disk is coming online */ |
2227 | static int tw_slave_configure(struct scsi_device *sdev) | |
2228 | { | |
2229 | /* Force 60 second timeout */ | |
2230 | blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); | |
2231 | ||
2232 | return 0; | |
2233 | } /* End tw_slave_configure() */ | |
2234 | ||
1da177e4 LT |
2235 | static struct scsi_host_template driver_template = { |
2236 | .module = THIS_MODULE, | |
2237 | .name = "3ware Storage Controller", | |
2238 | .queuecommand = tw_scsi_queue, | |
2239 | .eh_host_reset_handler = tw_scsi_eh_reset, | |
2240 | .bios_param = tw_scsi_biosparam, | |
2241 | .change_queue_depth = tw_change_queue_depth, | |
2242 | .can_queue = TW_Q_LENGTH-2, | |
4deedd84 | 2243 | .slave_configure = tw_slave_configure, |
1da177e4 LT |
2244 | .this_id = -1, |
2245 | .sg_tablesize = TW_MAX_SGL_LENGTH, | |
2246 | .max_sectors = TW_MAX_SECTORS, | |
2247 | .cmd_per_lun = TW_MAX_CMDS_PER_LUN, | |
2248 | .use_clustering = ENABLE_CLUSTERING, | |
2249 | .shost_attrs = tw_host_attrs, | |
8562d028 MP |
2250 | .emulated = 1, |
2251 | .no_write_same = 1, | |
1da177e4 LT |
2252 | }; |
2253 | ||
2254 | /* This function will probe and initialize a card */ | |
6f039790 | 2255 | static int tw_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) |
1da177e4 LT |
2256 | { |
2257 | struct Scsi_Host *host = NULL; | |
2258 | TW_Device_Extension *tw_dev; | |
2259 | int retval = -ENODEV; | |
2260 | ||
2261 | retval = pci_enable_device(pdev); | |
2262 | if (retval) { | |
2263 | printk(KERN_WARNING "3w-xxxx: Failed to enable pci device."); | |
2264 | goto out_disable_device; | |
2265 | } | |
2266 | ||
2267 | pci_set_master(pdev); | |
2268 | ||
2269 | retval = pci_set_dma_mask(pdev, TW_DMA_MASK); | |
2270 | if (retval) { | |
2271 | printk(KERN_WARNING "3w-xxxx: Failed to set dma mask."); | |
2272 | goto out_disable_device; | |
2273 | } | |
2274 | ||
2275 | host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension)); | |
2276 | if (!host) { | |
2277 | printk(KERN_WARNING "3w-xxxx: Failed to allocate memory for device extension."); | |
2278 | retval = -ENOMEM; | |
2279 | goto out_disable_device; | |
2280 | } | |
2281 | tw_dev = (TW_Device_Extension *)host->hostdata; | |
2282 | ||
1da177e4 LT |
2283 | /* Save values to device extension */ |
2284 | tw_dev->host = host; | |
2285 | tw_dev->tw_pci_dev = pdev; | |
2286 | ||
2287 | if (tw_initialize_device_extension(tw_dev)) { | |
2288 | printk(KERN_WARNING "3w-xxxx: Failed to initialize device extension."); | |
2289 | goto out_free_device_extension; | |
2290 | } | |
2291 | ||
2292 | /* Request IO regions */ | |
2293 | retval = pci_request_regions(pdev, "3w-xxxx"); | |
2294 | if (retval) { | |
2295 | printk(KERN_WARNING "3w-xxxx: Failed to get mem region."); | |
2296 | goto out_free_device_extension; | |
2297 | } | |
2298 | ||
2299 | /* Save base address */ | |
2300 | tw_dev->base_addr = pci_resource_start(pdev, 0); | |
2301 | if (!tw_dev->base_addr) { | |
2302 | printk(KERN_WARNING "3w-xxxx: Failed to get io address."); | |
2303 | goto out_release_mem_region; | |
2304 | } | |
2305 | ||
2306 | /* Disable interrupts on the card */ | |
2307 | TW_DISABLE_INTERRUPTS(tw_dev); | |
2308 | ||
2309 | /* Initialize the card */ | |
2310 | if (tw_reset_sequence(tw_dev)) | |
2311 | goto out_release_mem_region; | |
2312 | ||
2313 | /* Set host specific parameters */ | |
2314 | host->max_id = TW_MAX_UNITS; | |
2315 | host->max_cmd_len = TW_MAX_CDB_LEN; | |
2316 | ||
2317 | /* Luns and channels aren't supported by adapter */ | |
2318 | host->max_lun = 0; | |
2319 | host->max_channel = 0; | |
2320 | ||
2321 | /* Register the card with the kernel SCSI layer */ | |
2322 | retval = scsi_add_host(host, &pdev->dev); | |
2323 | if (retval) { | |
2324 | printk(KERN_WARNING "3w-xxxx: scsi add host failed"); | |
2325 | goto out_release_mem_region; | |
2326 | } | |
2327 | ||
2328 | pci_set_drvdata(pdev, host); | |
2329 | ||
2330 | printk(KERN_WARNING "3w-xxxx: scsi%d: Found a 3ware Storage Controller at 0x%x, IRQ: %d.\n", host->host_no, tw_dev->base_addr, pdev->irq); | |
2331 | ||
2332 | /* Now setup the interrupt handler */ | |
1d6f359a | 2333 | retval = request_irq(pdev->irq, tw_interrupt, IRQF_SHARED, "3w-xxxx", tw_dev); |
1da177e4 LT |
2334 | if (retval) { |
2335 | printk(KERN_WARNING "3w-xxxx: Error requesting IRQ."); | |
2336 | goto out_remove_host; | |
2337 | } | |
2338 | ||
2339 | tw_device_extension_list[tw_device_extension_count] = tw_dev; | |
2340 | tw_device_extension_count++; | |
2341 | ||
2342 | /* Re-enable interrupts on the card */ | |
2343 | TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev); | |
2344 | ||
2345 | /* Finally, scan the host */ | |
2346 | scsi_scan_host(host); | |
2347 | ||
2348 | if (twe_major == -1) { | |
2349 | if ((twe_major = register_chrdev (0, "twe", &tw_fops)) < 0) | |
2350 | printk(KERN_WARNING "3w-xxxx: Failed to register character device."); | |
2351 | } | |
2352 | return 0; | |
2353 | ||
2354 | out_remove_host: | |
2355 | scsi_remove_host(host); | |
2356 | out_release_mem_region: | |
2357 | pci_release_regions(pdev); | |
2358 | out_free_device_extension: | |
2359 | tw_free_device_extension(tw_dev); | |
2360 | scsi_host_put(host); | |
2361 | out_disable_device: | |
2362 | pci_disable_device(pdev); | |
2363 | ||
2364 | return retval; | |
2365 | } /* End tw_probe() */ | |
2366 | ||
2367 | /* This function is called to remove a device */ | |
2368 | static void tw_remove(struct pci_dev *pdev) | |
2369 | { | |
2370 | struct Scsi_Host *host = pci_get_drvdata(pdev); | |
2371 | TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; | |
2372 | ||
2373 | scsi_remove_host(tw_dev->host); | |
2374 | ||
2375 | /* Unregister character device */ | |
2376 | if (twe_major >= 0) { | |
2377 | unregister_chrdev(twe_major, "twe"); | |
2378 | twe_major = -1; | |
2379 | } | |
2380 | ||
1da177e4 LT |
2381 | /* Shutdown the card */ |
2382 | __tw_shutdown(tw_dev); | |
2383 | ||
2384 | /* Free up the mem region */ | |
2385 | pci_release_regions(pdev); | |
2386 | ||
2387 | /* Free up device extension resources */ | |
2388 | tw_free_device_extension(tw_dev); | |
2389 | ||
2390 | scsi_host_put(tw_dev->host); | |
2391 | pci_disable_device(pdev); | |
2392 | tw_device_extension_count--; | |
2393 | } /* End tw_remove() */ | |
2394 | ||
2395 | /* PCI Devices supported by this driver */ | |
6f039790 | 2396 | static struct pci_device_id tw_pci_tbl[] = { |
1da177e4 LT |
2397 | { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_1000, |
2398 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
2399 | { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_7000, | |
2400 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
2401 | { } | |
2402 | }; | |
2403 | MODULE_DEVICE_TABLE(pci, tw_pci_tbl); | |
2404 | ||
2405 | /* pci_driver initializer */ | |
2406 | static struct pci_driver tw_driver = { | |
2407 | .name = "3w-xxxx", | |
2408 | .id_table = tw_pci_tbl, | |
2409 | .probe = tw_probe, | |
2410 | .remove = tw_remove, | |
d18c3db5 | 2411 | .shutdown = tw_shutdown, |
1da177e4 LT |
2412 | }; |
2413 | ||
2414 | /* This function is called on driver initialization */ | |
2415 | static int __init tw_init(void) | |
2416 | { | |
2417 | printk(KERN_WARNING "3ware Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION); | |
2418 | ||
dcbccbde | 2419 | return pci_register_driver(&tw_driver); |
1da177e4 LT |
2420 | } /* End tw_init() */ |
2421 | ||
2422 | /* This function is called on driver exit */ | |
2423 | static void __exit tw_exit(void) | |
2424 | { | |
2425 | pci_unregister_driver(&tw_driver); | |
2426 | } /* End tw_exit() */ | |
2427 | ||
2428 | module_init(tw_init); | |
2429 | module_exit(tw_exit); | |
2430 |