Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * | |
3 | * linux/drivers/s390/scsi/zfcp_fsf.c | |
4 | * | |
5 | * FCP adapter driver for IBM eServer zSeries | |
6 | * | |
7 | * (C) Copyright IBM Corp. 2002, 2004 | |
8 | * | |
9 | * Author(s): Martin Peschke <mpeschke@de.ibm.com> | |
10 | * Raimund Schroeder <raimund.schroeder@de.ibm.com> | |
11 | * Aron Zeh | |
12 | * Wolfgang Taphorn | |
13 | * Stefan Bader <stefan.bader@de.ibm.com> | |
14 | * Heiko Carstens <heiko.carstens@de.ibm.com> | |
15 | * Andreas Herrmann <aherrman@de.ibm.com> | |
16 | * Volker Sameske <sameske@de.ibm.com> | |
17 | * | |
18 | * This program is free software; you can redistribute it and/or modify | |
19 | * it under the terms of the GNU General Public License as published by | |
20 | * the Free Software Foundation; either version 2, or (at your option) | |
21 | * any later version. | |
22 | * | |
23 | * This program is distributed in the hope that it will be useful, | |
24 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
25 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
26 | * GNU General Public License for more details. | |
27 | * | |
28 | * You should have received a copy of the GNU General Public License | |
29 | * along with this program; if not, write to the Free Software | |
30 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
31 | */ | |
32 | ||
33 | #define ZFCP_FSF_C_REVISION "$Revision: 1.92 $" | |
34 | ||
35 | #include "zfcp_ext.h" | |
36 | ||
37 | static int zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *); | |
38 | static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *); | |
39 | static int zfcp_fsf_open_port_handler(struct zfcp_fsf_req *); | |
40 | static int zfcp_fsf_close_port_handler(struct zfcp_fsf_req *); | |
41 | static int zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *); | |
42 | static int zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *); | |
43 | static int zfcp_fsf_close_unit_handler(struct zfcp_fsf_req *); | |
44 | static int zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *); | |
45 | static int zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *); | |
46 | static int zfcp_fsf_send_fcp_command_task_management_handler( | |
47 | struct zfcp_fsf_req *); | |
48 | static int zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *); | |
49 | static int zfcp_fsf_status_read_handler(struct zfcp_fsf_req *); | |
50 | static int zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *); | |
51 | static int zfcp_fsf_send_els_handler(struct zfcp_fsf_req *); | |
52 | static int zfcp_fsf_control_file_handler(struct zfcp_fsf_req *); | |
53 | static inline int zfcp_fsf_req_sbal_check( | |
54 | unsigned long *, struct zfcp_qdio_queue *, int); | |
55 | static inline int zfcp_use_one_sbal( | |
56 | struct scatterlist *, int, struct scatterlist *, int); | |
57 | static struct zfcp_fsf_req *zfcp_fsf_req_alloc(mempool_t *, int); | |
58 | static int zfcp_fsf_req_send(struct zfcp_fsf_req *, struct timer_list *); | |
59 | static int zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *); | |
60 | static int zfcp_fsf_fsfstatus_eval(struct zfcp_fsf_req *); | |
61 | static int zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *); | |
62 | static int zfcp_fsf_req_dispatch(struct zfcp_fsf_req *); | |
63 | static void zfcp_fsf_req_dismiss(struct zfcp_fsf_req *); | |
1da177e4 LT |
64 | |
65 | /* association between FSF command and FSF QTCB type */ | |
66 | static u32 fsf_qtcb_type[] = { | |
67 | [FSF_QTCB_FCP_CMND] = FSF_IO_COMMAND, | |
68 | [FSF_QTCB_ABORT_FCP_CMND] = FSF_SUPPORT_COMMAND, | |
69 | [FSF_QTCB_OPEN_PORT_WITH_DID] = FSF_SUPPORT_COMMAND, | |
70 | [FSF_QTCB_OPEN_LUN] = FSF_SUPPORT_COMMAND, | |
71 | [FSF_QTCB_CLOSE_LUN] = FSF_SUPPORT_COMMAND, | |
72 | [FSF_QTCB_CLOSE_PORT] = FSF_SUPPORT_COMMAND, | |
73 | [FSF_QTCB_CLOSE_PHYSICAL_PORT] = FSF_SUPPORT_COMMAND, | |
74 | [FSF_QTCB_SEND_ELS] = FSF_SUPPORT_COMMAND, | |
75 | [FSF_QTCB_SEND_GENERIC] = FSF_SUPPORT_COMMAND, | |
76 | [FSF_QTCB_EXCHANGE_CONFIG_DATA] = FSF_CONFIG_COMMAND, | |
77 | [FSF_QTCB_EXCHANGE_PORT_DATA] = FSF_PORT_COMMAND, | |
78 | [FSF_QTCB_DOWNLOAD_CONTROL_FILE] = FSF_SUPPORT_COMMAND, | |
79 | [FSF_QTCB_UPLOAD_CONTROL_FILE] = FSF_SUPPORT_COMMAND | |
80 | }; | |
81 | ||
82 | static const char zfcp_act_subtable_type[5][8] = { | |
83 | "unknown", "OS", "WWPN", "DID", "LUN" | |
84 | }; | |
85 | ||
86 | /****************************************************************/ | |
87 | /*************** FSF related Functions *************************/ | |
88 | /****************************************************************/ | |
89 | ||
90 | #define ZFCP_LOG_AREA ZFCP_LOG_AREA_FSF | |
91 | ||
92 | /* | |
93 | * function: zfcp_fsf_req_alloc | |
94 | * | |
95 | * purpose: Obtains an fsf_req and potentially a qtcb (for all but | |
96 | * unsolicited requests) via helper functions | |
97 | * Does some initial fsf request set-up. | |
98 | * | |
99 | * returns: pointer to allocated fsf_req if successfull | |
100 | * NULL otherwise | |
101 | * | |
102 | * locks: none | |
103 | * | |
104 | */ | |
105 | static struct zfcp_fsf_req * | |
106 | zfcp_fsf_req_alloc(mempool_t *pool, int req_flags) | |
107 | { | |
108 | size_t size; | |
109 | void *ptr; | |
110 | struct zfcp_fsf_req *fsf_req = NULL; | |
111 | ||
112 | if (req_flags & ZFCP_REQ_NO_QTCB) | |
113 | size = sizeof(struct zfcp_fsf_req); | |
114 | else | |
115 | size = sizeof(struct zfcp_fsf_req_pool_element); | |
116 | ||
117 | if (likely(pool != NULL)) | |
118 | ptr = mempool_alloc(pool, GFP_ATOMIC); | |
119 | else | |
120 | ptr = kmalloc(size, GFP_ATOMIC); | |
121 | ||
122 | if (unlikely(NULL == ptr)) | |
123 | goto out; | |
124 | ||
125 | memset(ptr, 0, size); | |
126 | ||
127 | if (req_flags & ZFCP_REQ_NO_QTCB) { | |
128 | fsf_req = (struct zfcp_fsf_req *) ptr; | |
129 | } else { | |
130 | fsf_req = &((struct zfcp_fsf_req_pool_element *) ptr)->fsf_req; | |
131 | fsf_req->qtcb = | |
132 | &((struct zfcp_fsf_req_pool_element *) ptr)->qtcb; | |
133 | } | |
134 | ||
135 | fsf_req->pool = pool; | |
136 | ||
137 | out: | |
138 | return fsf_req; | |
139 | } | |
140 | ||
141 | /* | |
142 | * function: zfcp_fsf_req_free | |
143 | * | |
144 | * purpose: Frees the memory of an fsf_req (and potentially a qtcb) or | |
145 | * returns it into the pool via helper functions. | |
146 | * | |
147 | * returns: sod all | |
148 | * | |
149 | * locks: none | |
150 | */ | |
1db2c9c0 | 151 | void |
1da177e4 LT |
152 | zfcp_fsf_req_free(struct zfcp_fsf_req *fsf_req) |
153 | { | |
154 | if (likely(fsf_req->pool != NULL)) | |
155 | mempool_free(fsf_req, fsf_req->pool); | |
1db2c9c0 AH |
156 | else |
157 | kfree(fsf_req); | |
1da177e4 LT |
158 | } |
159 | ||
160 | /* | |
161 | * function: | |
162 | * | |
163 | * purpose: | |
164 | * | |
165 | * returns: | |
166 | * | |
167 | * note: qdio queues shall be down (no ongoing inbound processing) | |
168 | */ | |
169 | int | |
170 | zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter) | |
171 | { | |
1da177e4 | 172 | struct zfcp_fsf_req *fsf_req, *tmp; |
1db2c9c0 AH |
173 | unsigned long flags; |
174 | LIST_HEAD(remove_queue); | |
1da177e4 | 175 | |
1db2c9c0 AH |
176 | spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); |
177 | list_splice_init(&adapter->fsf_req_list_head, &remove_queue); | |
178 | atomic_set(&adapter->fsf_reqs_active, 0); | |
179 | spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); | |
1da177e4 | 180 | |
1db2c9c0 AH |
181 | list_for_each_entry_safe(fsf_req, tmp, &remove_queue, list) { |
182 | list_del(&fsf_req->list); | |
183 | zfcp_fsf_req_dismiss(fsf_req); | |
1da177e4 LT |
184 | } |
185 | ||
1db2c9c0 | 186 | return 0; |
1da177e4 LT |
187 | } |
188 | ||
189 | /* | |
190 | * function: | |
191 | * | |
192 | * purpose: | |
193 | * | |
194 | * returns: | |
195 | */ | |
196 | static void | |
197 | zfcp_fsf_req_dismiss(struct zfcp_fsf_req *fsf_req) | |
198 | { | |
199 | fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; | |
200 | zfcp_fsf_req_complete(fsf_req); | |
201 | } | |
202 | ||
203 | /* | |
204 | * function: zfcp_fsf_req_complete | |
205 | * | |
206 | * purpose: Updates active counts and timers for openfcp-reqs | |
207 | * May cleanup request after req_eval returns | |
208 | * | |
209 | * returns: 0 - success | |
210 | * !0 - failure | |
211 | * | |
212 | * context: | |
213 | */ | |
214 | int | |
215 | zfcp_fsf_req_complete(struct zfcp_fsf_req *fsf_req) | |
216 | { | |
217 | int retval = 0; | |
218 | int cleanup; | |
1da177e4 LT |
219 | |
220 | if (unlikely(fsf_req->fsf_command == FSF_QTCB_UNSOLICITED_STATUS)) { | |
221 | ZFCP_LOG_DEBUG("Status read response received\n"); | |
222 | /* | |
223 | * Note: all cleanup handling is done in the callchain of | |
224 | * the function call-chain below. | |
225 | */ | |
226 | zfcp_fsf_status_read_handler(fsf_req); | |
227 | goto out; | |
228 | } else | |
229 | zfcp_fsf_protstatus_eval(fsf_req); | |
230 | ||
231 | /* | |
232 | * fsf_req may be deleted due to waking up functions, so | |
233 | * cleanup is saved here and used later | |
234 | */ | |
235 | if (likely(fsf_req->status & ZFCP_STATUS_FSFREQ_CLEANUP)) | |
236 | cleanup = 1; | |
237 | else | |
238 | cleanup = 0; | |
239 | ||
240 | fsf_req->status |= ZFCP_STATUS_FSFREQ_COMPLETED; | |
241 | ||
242 | /* cleanup request if requested by initiator */ | |
243 | if (likely(cleanup)) { | |
244 | ZFCP_LOG_TRACE("removing FSF request %p\n", fsf_req); | |
245 | /* | |
246 | * lock must not be held here since it will be | |
247 | * grabed by the called routine, too | |
248 | */ | |
1db2c9c0 | 249 | zfcp_fsf_req_free(fsf_req); |
1da177e4 LT |
250 | } else { |
251 | /* notify initiator waiting for the requests completion */ | |
252 | ZFCP_LOG_TRACE("waking initiator of FSF request %p\n",fsf_req); | |
253 | /* | |
254 | * FIXME: Race! We must not access fsf_req here as it might have been | |
255 | * cleaned up already due to the set ZFCP_STATUS_FSFREQ_COMPLETED | |
256 | * flag. It's an improbable case. But, we have the same paranoia for | |
257 | * the cleanup flag already. | |
258 | * Might better be handled using complete()? | |
259 | * (setting the flag and doing wakeup ought to be atomic | |
260 | * with regard to checking the flag as long as waitqueue is | |
261 | * part of the to be released structure) | |
262 | */ | |
263 | wake_up(&fsf_req->completion_wq); | |
264 | } | |
265 | ||
266 | out: | |
267 | return retval; | |
268 | } | |
269 | ||
270 | /* | |
271 | * function: zfcp_fsf_protstatus_eval | |
272 | * | |
273 | * purpose: evaluates the QTCB of the finished FSF request | |
274 | * and initiates appropriate actions | |
275 | * (usually calling FSF command specific handlers) | |
276 | * | |
277 | * returns: | |
278 | * | |
279 | * context: | |
280 | * | |
281 | * locks: | |
282 | */ | |
283 | static int | |
284 | zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *fsf_req) | |
285 | { | |
286 | int retval = 0; | |
287 | struct zfcp_adapter *adapter = fsf_req->adapter; | |
8a36e453 MS |
288 | struct fsf_qtcb *qtcb = fsf_req->qtcb; |
289 | union fsf_prot_status_qual *prot_status_qual = | |
290 | &qtcb->prefix.prot_status_qual; | |
1da177e4 | 291 | |
8a36e453 | 292 | zfcp_hba_dbf_event_fsf_response(fsf_req); |
1da177e4 LT |
293 | |
294 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED) { | |
295 | ZFCP_LOG_DEBUG("fsf_req 0x%lx has been dismissed\n", | |
296 | (unsigned long) fsf_req); | |
297 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR | | |
298 | ZFCP_STATUS_FSFREQ_RETRY; /* only for SCSI cmnds. */ | |
1da177e4 LT |
299 | goto skip_protstatus; |
300 | } | |
301 | ||
302 | /* log additional information provided by FSF (if any) */ | |
8a36e453 | 303 | if (unlikely(qtcb->header.log_length)) { |
1da177e4 | 304 | /* do not trust them ;-) */ |
8a36e453 | 305 | if (qtcb->header.log_start > sizeof(struct fsf_qtcb)) { |
1da177e4 LT |
306 | ZFCP_LOG_NORMAL |
307 | ("bug: ULP (FSF logging) log data starts " | |
308 | "beyond end of packet header. Ignored. " | |
309 | "(start=%i, size=%li)\n", | |
8a36e453 | 310 | qtcb->header.log_start, |
1da177e4 LT |
311 | sizeof(struct fsf_qtcb)); |
312 | goto forget_log; | |
313 | } | |
8a36e453 | 314 | if ((size_t) (qtcb->header.log_start + qtcb->header.log_length) |
1da177e4 LT |
315 | > sizeof(struct fsf_qtcb)) { |
316 | ZFCP_LOG_NORMAL("bug: ULP (FSF logging) log data ends " | |
317 | "beyond end of packet header. Ignored. " | |
318 | "(start=%i, length=%i, size=%li)\n", | |
8a36e453 MS |
319 | qtcb->header.log_start, |
320 | qtcb->header.log_length, | |
1da177e4 LT |
321 | sizeof(struct fsf_qtcb)); |
322 | goto forget_log; | |
323 | } | |
324 | ZFCP_LOG_TRACE("ULP log data: \n"); | |
325 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, | |
8a36e453 MS |
326 | (char *) qtcb + qtcb->header.log_start, |
327 | qtcb->header.log_length); | |
1da177e4 LT |
328 | } |
329 | forget_log: | |
330 | ||
331 | /* evaluate FSF Protocol Status */ | |
8a36e453 | 332 | switch (qtcb->prefix.prot_status) { |
1da177e4 LT |
333 | |
334 | case FSF_PROT_GOOD: | |
1da177e4 | 335 | case FSF_PROT_FSF_STATUS_PRESENTED: |
1da177e4 LT |
336 | break; |
337 | ||
338 | case FSF_PROT_QTCB_VERSION_ERROR: | |
1da177e4 LT |
339 | ZFCP_LOG_NORMAL("error: The adapter %s contains " |
340 | "microcode of version 0x%x, the device driver " | |
341 | "only supports 0x%x. Aborting.\n", | |
342 | zfcp_get_busid_by_adapter(adapter), | |
8a36e453 MS |
343 | prot_status_qual->version_error.fsf_version, |
344 | ZFCP_QTCB_VERSION); | |
1da177e4 | 345 | zfcp_erp_adapter_shutdown(adapter, 0); |
1da177e4 LT |
346 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
347 | break; | |
348 | ||
349 | case FSF_PROT_SEQ_NUMB_ERROR: | |
1da177e4 LT |
350 | ZFCP_LOG_NORMAL("bug: Sequence number mismatch between " |
351 | "driver (0x%x) and adapter %s (0x%x). " | |
352 | "Restarting all operations on this adapter.\n", | |
8a36e453 | 353 | qtcb->prefix.req_seq_no, |
1da177e4 | 354 | zfcp_get_busid_by_adapter(adapter), |
8a36e453 | 355 | prot_status_qual->sequence_error.exp_req_seq_no); |
1da177e4 | 356 | zfcp_erp_adapter_reopen(adapter, 0); |
1da177e4 LT |
357 | fsf_req->status |= ZFCP_STATUS_FSFREQ_RETRY; |
358 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
359 | break; | |
360 | ||
361 | case FSF_PROT_UNSUPP_QTCB_TYPE: | |
1da177e4 LT |
362 | ZFCP_LOG_NORMAL("error: Packet header type used by the " |
363 | "device driver is incompatible with " | |
364 | "that used on adapter %s. " | |
365 | "Stopping all operations on this adapter.\n", | |
366 | zfcp_get_busid_by_adapter(adapter)); | |
1da177e4 | 367 | zfcp_erp_adapter_shutdown(adapter, 0); |
1da177e4 LT |
368 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
369 | break; | |
370 | ||
371 | case FSF_PROT_HOST_CONNECTION_INITIALIZING: | |
1da177e4 LT |
372 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
373 | atomic_set_mask(ZFCP_STATUS_ADAPTER_HOST_CON_INIT, | |
374 | &(adapter->status)); | |
1da177e4 LT |
375 | break; |
376 | ||
377 | case FSF_PROT_DUPLICATE_REQUEST_ID: | |
1da177e4 LT |
378 | if (fsf_req->qtcb) { |
379 | ZFCP_LOG_NORMAL("bug: The request identifier 0x%Lx " | |
380 | "to the adapter %s is ambiguous. " | |
381 | "Stopping all operations on this " | |
382 | "adapter.\n", | |
383 | *(unsigned long long *) | |
384 | (&fsf_req->qtcb->bottom.support. | |
385 | req_handle), | |
386 | zfcp_get_busid_by_adapter(adapter)); | |
387 | } else { | |
388 | ZFCP_LOG_NORMAL("bug: The request identifier %p " | |
389 | "to the adapter %s is ambiguous. " | |
390 | "Stopping all operations on this " | |
391 | "adapter. " | |
392 | "(bug: got this for an unsolicited " | |
393 | "status read request)\n", | |
394 | fsf_req, | |
395 | zfcp_get_busid_by_adapter(adapter)); | |
396 | } | |
1da177e4 | 397 | zfcp_erp_adapter_shutdown(adapter, 0); |
1da177e4 LT |
398 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
399 | break; | |
400 | ||
401 | case FSF_PROT_LINK_DOWN: | |
1da177e4 LT |
402 | /* |
403 | * 'test and set' is not atomic here - | |
404 | * it's ok as long as calls to our response queue handler | |
405 | * (and thus execution of this code here) are serialized | |
406 | * by the qdio module | |
407 | */ | |
408 | if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, | |
409 | &adapter->status)) { | |
410 | switch (fsf_req->qtcb->prefix.prot_status_qual. | |
411 | locallink_error.code) { | |
412 | case FSF_PSQ_LINK_NOLIGHT: | |
413 | ZFCP_LOG_INFO("The local link to adapter %s " | |
414 | "is down (no light detected).\n", | |
415 | zfcp_get_busid_by_adapter( | |
416 | adapter)); | |
417 | break; | |
418 | case FSF_PSQ_LINK_WRAPPLUG: | |
419 | ZFCP_LOG_INFO("The local link to adapter %s " | |
420 | "is down (wrap plug detected).\n", | |
421 | zfcp_get_busid_by_adapter( | |
422 | adapter)); | |
423 | break; | |
424 | case FSF_PSQ_LINK_NOFCP: | |
425 | ZFCP_LOG_INFO("The local link to adapter %s " | |
426 | "is down (adjacent node on " | |
427 | "link does not support FCP).\n", | |
428 | zfcp_get_busid_by_adapter( | |
429 | adapter)); | |
430 | break; | |
431 | default: | |
432 | ZFCP_LOG_INFO("The local link to adapter %s " | |
433 | "is down " | |
434 | "(warning: unknown reason " | |
435 | "code).\n", | |
436 | zfcp_get_busid_by_adapter( | |
437 | adapter)); | |
438 | break; | |
439 | ||
440 | } | |
441 | /* | |
442 | * Due to the 'erp failed' flag the adapter won't | |
443 | * be recovered but will be just set to 'blocked' | |
444 | * state. All subordinary devices will have state | |
445 | * 'blocked' and 'erp failed', too. | |
446 | * Thus the adapter is still able to provide | |
447 | * 'link up' status without being flooded with | |
448 | * requests. | |
449 | * (note: even 'close port' is not permitted) | |
450 | */ | |
451 | ZFCP_LOG_INFO("Stopping all operations for adapter " | |
452 | "%s.\n", | |
453 | zfcp_get_busid_by_adapter(adapter)); | |
454 | atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED | | |
455 | ZFCP_STATUS_COMMON_ERP_FAILED, | |
456 | &adapter->status); | |
457 | zfcp_erp_adapter_reopen(adapter, 0); | |
1da177e4 LT |
458 | } |
459 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
460 | break; | |
461 | ||
462 | case FSF_PROT_REEST_QUEUE: | |
8a36e453 | 463 | ZFCP_LOG_NORMAL("The local link to adapter with " |
1da177e4 LT |
464 | "%s was re-plugged. " |
465 | "Re-starting operations on this adapter.\n", | |
466 | zfcp_get_busid_by_adapter(adapter)); | |
467 | /* All ports should be marked as ready to run again */ | |
468 | zfcp_erp_modify_adapter_status(adapter, | |
469 | ZFCP_STATUS_COMMON_RUNNING, | |
470 | ZFCP_SET); | |
471 | zfcp_erp_adapter_reopen(adapter, | |
472 | ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED | |
473 | | ZFCP_STATUS_COMMON_ERP_FAILED); | |
1da177e4 LT |
474 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
475 | break; | |
476 | ||
477 | case FSF_PROT_ERROR_STATE: | |
1da177e4 LT |
478 | ZFCP_LOG_NORMAL("error: The adapter %s " |
479 | "has entered the error state. " | |
480 | "Restarting all operations on this " | |
481 | "adapter.\n", | |
482 | zfcp_get_busid_by_adapter(adapter)); | |
1da177e4 | 483 | zfcp_erp_adapter_reopen(adapter, 0); |
1da177e4 LT |
484 | fsf_req->status |= ZFCP_STATUS_FSFREQ_RETRY; |
485 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
486 | break; | |
487 | ||
488 | default: | |
489 | ZFCP_LOG_NORMAL("bug: Transfer protocol status information " | |
490 | "provided by the adapter %s " | |
491 | "is not compatible with the device driver. " | |
492 | "Stopping all operations on this adapter. " | |
493 | "(debug info 0x%x).\n", | |
494 | zfcp_get_busid_by_adapter(adapter), | |
8a36e453 | 495 | qtcb->prefix.prot_status); |
1da177e4 LT |
496 | zfcp_erp_adapter_shutdown(adapter, 0); |
497 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
498 | } | |
499 | ||
500 | skip_protstatus: | |
501 | /* | |
502 | * always call specific handlers to give them a chance to do | |
503 | * something meaningful even in error cases | |
504 | */ | |
505 | zfcp_fsf_fsfstatus_eval(fsf_req); | |
506 | return retval; | |
507 | } | |
508 | ||
509 | /* | |
510 | * function: zfcp_fsf_fsfstatus_eval | |
511 | * | |
512 | * purpose: evaluates FSF status of completed FSF request | |
513 | * and acts accordingly | |
514 | * | |
515 | * returns: | |
516 | */ | |
517 | static int | |
518 | zfcp_fsf_fsfstatus_eval(struct zfcp_fsf_req *fsf_req) | |
519 | { | |
520 | int retval = 0; | |
521 | ||
522 | if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) { | |
523 | goto skip_fsfstatus; | |
524 | } | |
525 | ||
526 | /* evaluate FSF Status */ | |
527 | switch (fsf_req->qtcb->header.fsf_status) { | |
528 | case FSF_UNKNOWN_COMMAND: | |
1da177e4 LT |
529 | ZFCP_LOG_NORMAL("bug: Command issued by the device driver is " |
530 | "not known by the adapter %s " | |
531 | "Stopping all operations on this adapter. " | |
532 | "(debug info 0x%x).\n", | |
533 | zfcp_get_busid_by_adapter(fsf_req->adapter), | |
534 | fsf_req->qtcb->header.fsf_command); | |
1da177e4 | 535 | zfcp_erp_adapter_shutdown(fsf_req->adapter, 0); |
1da177e4 LT |
536 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
537 | break; | |
538 | ||
539 | case FSF_FCP_RSP_AVAILABLE: | |
1da177e4 LT |
540 | ZFCP_LOG_DEBUG("FCP Sense data will be presented to the " |
541 | "SCSI stack.\n"); | |
1da177e4 LT |
542 | break; |
543 | ||
544 | case FSF_ADAPTER_STATUS_AVAILABLE: | |
1da177e4 LT |
545 | zfcp_fsf_fsfstatus_qual_eval(fsf_req); |
546 | break; | |
1da177e4 LT |
547 | } |
548 | ||
549 | skip_fsfstatus: | |
550 | /* | |
551 | * always call specific handlers to give them a chance to do | |
552 | * something meaningful even in error cases | |
553 | */ | |
554 | zfcp_fsf_req_dispatch(fsf_req); | |
555 | ||
556 | return retval; | |
557 | } | |
558 | ||
559 | /* | |
560 | * function: zfcp_fsf_fsfstatus_qual_eval | |
561 | * | |
562 | * purpose: evaluates FSF status-qualifier of completed FSF request | |
563 | * and acts accordingly | |
564 | * | |
565 | * returns: | |
566 | */ | |
567 | static int | |
568 | zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *fsf_req) | |
569 | { | |
570 | int retval = 0; | |
571 | ||
572 | switch (fsf_req->qtcb->header.fsf_status_qual.word[0]) { | |
573 | case FSF_SQ_FCP_RSP_AVAILABLE: | |
1da177e4 LT |
574 | break; |
575 | case FSF_SQ_RETRY_IF_POSSIBLE: | |
1da177e4 | 576 | /* The SCSI-stack may now issue retries or escalate */ |
1da177e4 LT |
577 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
578 | break; | |
579 | case FSF_SQ_COMMAND_ABORTED: | |
1da177e4 | 580 | /* Carry the aborted state on to upper layer */ |
1da177e4 LT |
581 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ABORTED; |
582 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
583 | break; | |
584 | case FSF_SQ_NO_RECOM: | |
1da177e4 LT |
585 | ZFCP_LOG_NORMAL("bug: No recommendation could be given for a" |
586 | "problem on the adapter %s " | |
587 | "Stopping all operations on this adapter. ", | |
588 | zfcp_get_busid_by_adapter(fsf_req->adapter)); | |
589 | zfcp_erp_adapter_shutdown(fsf_req->adapter, 0); | |
1da177e4 LT |
590 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
591 | break; | |
592 | case FSF_SQ_ULP_PROGRAMMING_ERROR: | |
1da177e4 LT |
593 | ZFCP_LOG_NORMAL("error: not enough SBALs for data transfer " |
594 | "(adapter %s)\n", | |
595 | zfcp_get_busid_by_adapter(fsf_req->adapter)); | |
1da177e4 LT |
596 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
597 | break; | |
598 | case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: | |
599 | case FSF_SQ_NO_RETRY_POSSIBLE: | |
600 | case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: | |
601 | /* dealt with in the respective functions */ | |
602 | break; | |
603 | default: | |
604 | ZFCP_LOG_NORMAL("bug: Additional status info could " | |
605 | "not be interpreted properly.\n"); | |
606 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, | |
607 | (char *) &fsf_req->qtcb->header.fsf_status_qual, | |
608 | sizeof (union fsf_status_qual)); | |
1da177e4 LT |
609 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
610 | break; | |
611 | } | |
612 | ||
613 | return retval; | |
614 | } | |
615 | ||
616 | /* | |
617 | * function: zfcp_fsf_req_dispatch | |
618 | * | |
619 | * purpose: calls the appropriate command specific handler | |
620 | * | |
621 | * returns: | |
622 | */ | |
623 | static int | |
624 | zfcp_fsf_req_dispatch(struct zfcp_fsf_req *fsf_req) | |
625 | { | |
626 | struct zfcp_erp_action *erp_action = fsf_req->erp_action; | |
627 | struct zfcp_adapter *adapter = fsf_req->adapter; | |
628 | int retval = 0; | |
629 | ||
1da177e4 LT |
630 | |
631 | switch (fsf_req->fsf_command) { | |
632 | ||
633 | case FSF_QTCB_FCP_CMND: | |
1da177e4 LT |
634 | zfcp_fsf_send_fcp_command_handler(fsf_req); |
635 | break; | |
636 | ||
637 | case FSF_QTCB_ABORT_FCP_CMND: | |
1da177e4 LT |
638 | zfcp_fsf_abort_fcp_command_handler(fsf_req); |
639 | break; | |
640 | ||
641 | case FSF_QTCB_SEND_GENERIC: | |
1da177e4 LT |
642 | zfcp_fsf_send_ct_handler(fsf_req); |
643 | break; | |
644 | ||
645 | case FSF_QTCB_OPEN_PORT_WITH_DID: | |
1da177e4 LT |
646 | zfcp_fsf_open_port_handler(fsf_req); |
647 | break; | |
648 | ||
649 | case FSF_QTCB_OPEN_LUN: | |
1da177e4 LT |
650 | zfcp_fsf_open_unit_handler(fsf_req); |
651 | break; | |
652 | ||
653 | case FSF_QTCB_CLOSE_LUN: | |
1da177e4 LT |
654 | zfcp_fsf_close_unit_handler(fsf_req); |
655 | break; | |
656 | ||
657 | case FSF_QTCB_CLOSE_PORT: | |
1da177e4 LT |
658 | zfcp_fsf_close_port_handler(fsf_req); |
659 | break; | |
660 | ||
661 | case FSF_QTCB_CLOSE_PHYSICAL_PORT: | |
1da177e4 LT |
662 | zfcp_fsf_close_physical_port_handler(fsf_req); |
663 | break; | |
664 | ||
665 | case FSF_QTCB_EXCHANGE_CONFIG_DATA: | |
1da177e4 LT |
666 | zfcp_fsf_exchange_config_data_handler(fsf_req); |
667 | break; | |
668 | ||
669 | case FSF_QTCB_EXCHANGE_PORT_DATA: | |
1da177e4 LT |
670 | zfcp_fsf_exchange_port_data_handler(fsf_req); |
671 | break; | |
672 | ||
673 | case FSF_QTCB_SEND_ELS: | |
1da177e4 LT |
674 | zfcp_fsf_send_els_handler(fsf_req); |
675 | break; | |
676 | ||
677 | case FSF_QTCB_DOWNLOAD_CONTROL_FILE: | |
1da177e4 LT |
678 | zfcp_fsf_control_file_handler(fsf_req); |
679 | break; | |
680 | ||
681 | case FSF_QTCB_UPLOAD_CONTROL_FILE: | |
1da177e4 LT |
682 | zfcp_fsf_control_file_handler(fsf_req); |
683 | break; | |
684 | ||
685 | default: | |
1da177e4 LT |
686 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
687 | ZFCP_LOG_NORMAL("bug: Command issued by the device driver is " | |
688 | "not supported by the adapter %s\n", | |
8a36e453 | 689 | zfcp_get_busid_by_adapter(adapter)); |
1da177e4 LT |
690 | if (fsf_req->fsf_command != fsf_req->qtcb->header.fsf_command) |
691 | ZFCP_LOG_NORMAL | |
692 | ("bug: Command issued by the device driver differs " | |
693 | "from the command returned by the adapter %s " | |
694 | "(debug info 0x%x, 0x%x).\n", | |
8a36e453 | 695 | zfcp_get_busid_by_adapter(adapter), |
1da177e4 LT |
696 | fsf_req->fsf_command, |
697 | fsf_req->qtcb->header.fsf_command); | |
698 | } | |
699 | ||
700 | if (!erp_action) | |
701 | return retval; | |
702 | ||
1da177e4 LT |
703 | zfcp_erp_async_handler(erp_action, 0); |
704 | ||
705 | return retval; | |
706 | } | |
707 | ||
708 | /* | |
709 | * function: zfcp_fsf_status_read | |
710 | * | |
711 | * purpose: initiates a Status Read command at the specified adapter | |
712 | * | |
713 | * returns: | |
714 | */ | |
715 | int | |
716 | zfcp_fsf_status_read(struct zfcp_adapter *adapter, int req_flags) | |
717 | { | |
718 | struct zfcp_fsf_req *fsf_req; | |
719 | struct fsf_status_read_buffer *status_buffer; | |
720 | unsigned long lock_flags; | |
721 | volatile struct qdio_buffer_element *sbale; | |
722 | int retval = 0; | |
723 | ||
724 | /* setup new FSF request */ | |
725 | retval = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS, | |
726 | req_flags | ZFCP_REQ_NO_QTCB, | |
727 | adapter->pool.fsf_req_status_read, | |
728 | &lock_flags, &fsf_req); | |
729 | if (retval < 0) { | |
730 | ZFCP_LOG_INFO("error: Could not create unsolicited status " | |
731 | "buffer for adapter %s.\n", | |
732 | zfcp_get_busid_by_adapter(adapter)); | |
733 | goto failed_req_create; | |
734 | } | |
735 | ||
736 | sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); | |
737 | sbale[0].flags |= SBAL_FLAGS0_TYPE_STATUS; | |
738 | sbale[2].flags |= SBAL_FLAGS_LAST_ENTRY; | |
739 | fsf_req->sbale_curr = 2; | |
740 | ||
741 | status_buffer = | |
742 | mempool_alloc(adapter->pool.data_status_read, GFP_ATOMIC); | |
743 | if (!status_buffer) { | |
744 | ZFCP_LOG_NORMAL("bug: could not get some buffer\n"); | |
745 | goto failed_buf; | |
746 | } | |
747 | memset(status_buffer, 0, sizeof (struct fsf_status_read_buffer)); | |
059c97d0 | 748 | fsf_req->data = (unsigned long) status_buffer; |
1da177e4 LT |
749 | |
750 | /* insert pointer to respective buffer */ | |
751 | sbale = zfcp_qdio_sbale_curr(fsf_req); | |
752 | sbale->addr = (void *) status_buffer; | |
753 | sbale->length = sizeof(struct fsf_status_read_buffer); | |
754 | ||
755 | /* start QDIO request for this FSF request */ | |
756 | retval = zfcp_fsf_req_send(fsf_req, NULL); | |
757 | if (retval) { | |
758 | ZFCP_LOG_DEBUG("error: Could not set-up unsolicited status " | |
759 | "environment.\n"); | |
760 | goto failed_req_send; | |
761 | } | |
762 | ||
763 | ZFCP_LOG_TRACE("Status Read request initiated (adapter%s)\n", | |
764 | zfcp_get_busid_by_adapter(adapter)); | |
765 | goto out; | |
766 | ||
767 | failed_req_send: | |
768 | mempool_free(status_buffer, adapter->pool.data_status_read); | |
769 | ||
770 | failed_buf: | |
771 | zfcp_fsf_req_free(fsf_req); | |
772 | failed_req_create: | |
8a36e453 | 773 | zfcp_hba_dbf_event_fsf_unsol("fail", adapter, NULL); |
1da177e4 LT |
774 | out: |
775 | write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); | |
776 | return retval; | |
777 | } | |
778 | ||
779 | static int | |
780 | zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *fsf_req) | |
781 | { | |
782 | struct fsf_status_read_buffer *status_buffer; | |
783 | struct zfcp_adapter *adapter; | |
784 | struct zfcp_port *port; | |
785 | unsigned long flags; | |
786 | ||
059c97d0 | 787 | status_buffer = (struct fsf_status_read_buffer *) fsf_req->data; |
1da177e4 LT |
788 | adapter = fsf_req->adapter; |
789 | ||
790 | read_lock_irqsave(&zfcp_data.config_lock, flags); | |
791 | list_for_each_entry(port, &adapter->port_list_head, list) | |
792 | if (port->d_id == (status_buffer->d_id & ZFCP_DID_MASK)) | |
793 | break; | |
794 | read_unlock_irqrestore(&zfcp_data.config_lock, flags); | |
795 | ||
796 | if (!port || (port->d_id != (status_buffer->d_id & ZFCP_DID_MASK))) { | |
797 | ZFCP_LOG_NORMAL("bug: Reopen port indication received for" | |
798 | "nonexisting port with d_id 0x%08x on " | |
799 | "adapter %s. Ignored.\n", | |
800 | status_buffer->d_id & ZFCP_DID_MASK, | |
801 | zfcp_get_busid_by_adapter(adapter)); | |
802 | goto out; | |
803 | } | |
804 | ||
805 | switch (status_buffer->status_subtype) { | |
806 | ||
807 | case FSF_STATUS_READ_SUB_CLOSE_PHYS_PORT: | |
1da177e4 LT |
808 | debug_text_event(adapter->erp_dbf, 3, "unsol_pc_phys:"); |
809 | zfcp_erp_port_reopen(port, 0); | |
810 | break; | |
811 | ||
812 | case FSF_STATUS_READ_SUB_ERROR_PORT: | |
1da177e4 LT |
813 | debug_text_event(adapter->erp_dbf, 1, "unsol_pc_err:"); |
814 | zfcp_erp_port_shutdown(port, 0); | |
815 | break; | |
816 | ||
817 | default: | |
818 | debug_text_event(adapter->erp_dbf, 0, "unsol_unk_sub:"); | |
819 | debug_exception(adapter->erp_dbf, 0, | |
820 | &status_buffer->status_subtype, sizeof (u32)); | |
821 | ZFCP_LOG_NORMAL("bug: Undefined status subtype received " | |
822 | "for a reopen indication on port with " | |
823 | "d_id 0x%08x on the adapter %s. " | |
824 | "Ignored. (debug info 0x%x)\n", | |
825 | status_buffer->d_id, | |
826 | zfcp_get_busid_by_adapter(adapter), | |
827 | status_buffer->status_subtype); | |
828 | } | |
829 | out: | |
830 | return 0; | |
831 | } | |
832 | ||
833 | /* | |
834 | * function: zfcp_fsf_status_read_handler | |
835 | * | |
836 | * purpose: is called for finished Open Port command | |
837 | * | |
838 | * returns: | |
839 | */ | |
840 | static int | |
841 | zfcp_fsf_status_read_handler(struct zfcp_fsf_req *fsf_req) | |
842 | { | |
843 | int retval = 0; | |
844 | struct zfcp_adapter *adapter = fsf_req->adapter; | |
845 | struct fsf_status_read_buffer *status_buffer = | |
059c97d0 | 846 | (struct fsf_status_read_buffer *) fsf_req->data; |
1da177e4 LT |
847 | |
848 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED) { | |
8a36e453 | 849 | zfcp_hba_dbf_event_fsf_unsol("dism", adapter, status_buffer); |
1da177e4 | 850 | mempool_free(status_buffer, adapter->pool.data_status_read); |
1db2c9c0 | 851 | zfcp_fsf_req_free(fsf_req); |
1da177e4 LT |
852 | goto out; |
853 | } | |
854 | ||
8a36e453 MS |
855 | zfcp_hba_dbf_event_fsf_unsol("read", adapter, status_buffer); |
856 | ||
1da177e4 LT |
857 | switch (status_buffer->status_type) { |
858 | ||
859 | case FSF_STATUS_READ_PORT_CLOSED: | |
1da177e4 LT |
860 | zfcp_fsf_status_read_port_closed(fsf_req); |
861 | break; | |
862 | ||
863 | case FSF_STATUS_READ_INCOMING_ELS: | |
1da177e4 LT |
864 | zfcp_fsf_incoming_els(fsf_req); |
865 | break; | |
866 | ||
867 | case FSF_STATUS_READ_SENSE_DATA_AVAIL: | |
1da177e4 LT |
868 | ZFCP_LOG_INFO("unsolicited sense data received (adapter %s)\n", |
869 | zfcp_get_busid_by_adapter(adapter)); | |
1da177e4 LT |
870 | break; |
871 | ||
872 | case FSF_STATUS_READ_BIT_ERROR_THRESHOLD: | |
1da177e4 LT |
873 | ZFCP_LOG_NORMAL("Bit error threshold data received:\n"); |
874 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, | |
875 | (char *) status_buffer, | |
876 | sizeof (struct fsf_status_read_buffer)); | |
877 | break; | |
878 | ||
879 | case FSF_STATUS_READ_LINK_DOWN: | |
1da177e4 LT |
880 | debug_text_event(adapter->erp_dbf, 0, "unsol_link_down:"); |
881 | ZFCP_LOG_INFO("Local link to adapter %s is down\n", | |
882 | zfcp_get_busid_by_adapter(adapter)); | |
883 | atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, | |
884 | &adapter->status); | |
885 | zfcp_erp_adapter_failed(adapter); | |
886 | break; | |
887 | ||
888 | case FSF_STATUS_READ_LINK_UP: | |
1da177e4 LT |
889 | debug_text_event(adapter->erp_dbf, 2, "unsol_link_up:"); |
890 | ZFCP_LOG_INFO("Local link to adapter %s was replugged. " | |
891 | "Restarting operations on this adapter\n", | |
892 | zfcp_get_busid_by_adapter(adapter)); | |
893 | /* All ports should be marked as ready to run again */ | |
894 | zfcp_erp_modify_adapter_status(adapter, | |
895 | ZFCP_STATUS_COMMON_RUNNING, | |
896 | ZFCP_SET); | |
897 | zfcp_erp_adapter_reopen(adapter, | |
898 | ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED | |
899 | | ZFCP_STATUS_COMMON_ERP_FAILED); | |
900 | break; | |
901 | ||
902 | case FSF_STATUS_READ_CFDC_UPDATED: | |
8a36e453 | 903 | ZFCP_LOG_NORMAL("CFDC has been updated on the adapter %s\n", |
1da177e4 LT |
904 | zfcp_get_busid_by_adapter(adapter)); |
905 | zfcp_erp_adapter_access_changed(adapter); | |
906 | break; | |
907 | ||
908 | case FSF_STATUS_READ_CFDC_HARDENED: | |
1da177e4 LT |
909 | switch (status_buffer->status_subtype) { |
910 | case FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE: | |
8a36e453 | 911 | ZFCP_LOG_NORMAL("CFDC of adapter %s saved on SE\n", |
1da177e4 LT |
912 | zfcp_get_busid_by_adapter(adapter)); |
913 | break; | |
914 | case FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE2: | |
8a36e453 | 915 | ZFCP_LOG_NORMAL("CFDC of adapter %s has been copied " |
1da177e4 LT |
916 | "to the secondary SE\n", |
917 | zfcp_get_busid_by_adapter(adapter)); | |
918 | break; | |
919 | default: | |
8a36e453 | 920 | ZFCP_LOG_NORMAL("CFDC of adapter %s has been hardened\n", |
1da177e4 LT |
921 | zfcp_get_busid_by_adapter(adapter)); |
922 | } | |
923 | break; | |
924 | ||
925 | default: | |
8a36e453 | 926 | ZFCP_LOG_NORMAL("warning: An unsolicited status packet of unknown " |
1da177e4 LT |
927 | "type was received (debug info 0x%x)\n", |
928 | status_buffer->status_type); | |
929 | ZFCP_LOG_DEBUG("Dump of status_read_buffer %p:\n", | |
930 | status_buffer); | |
931 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
932 | (char *) status_buffer, | |
933 | sizeof (struct fsf_status_read_buffer)); | |
934 | break; | |
935 | } | |
936 | mempool_free(status_buffer, adapter->pool.data_status_read); | |
1db2c9c0 | 937 | zfcp_fsf_req_free(fsf_req); |
1da177e4 LT |
938 | /* |
939 | * recycle buffer and start new request repeat until outbound | |
940 | * queue is empty or adapter shutdown is requested | |
941 | */ | |
942 | /* | |
943 | * FIXME(qdio): | |
944 | * we may wait in the req_create for 5s during shutdown, so | |
945 | * qdio_cleanup will have to wait at least that long before returning | |
946 | * with failure to allow us a proper cleanup under all circumstances | |
947 | */ | |
948 | /* | |
949 | * FIXME: | |
950 | * allocation failure possible? (Is this code needed?) | |
951 | */ | |
952 | retval = zfcp_fsf_status_read(adapter, 0); | |
953 | if (retval < 0) { | |
954 | ZFCP_LOG_INFO("Failed to create unsolicited status read " | |
955 | "request for the adapter %s.\n", | |
956 | zfcp_get_busid_by_adapter(adapter)); | |
957 | /* temporary fix to avoid status read buffer shortage */ | |
958 | adapter->status_read_failed++; | |
959 | if ((ZFCP_STATUS_READS_RECOM - adapter->status_read_failed) | |
960 | < ZFCP_STATUS_READ_FAILED_THRESHOLD) { | |
961 | ZFCP_LOG_INFO("restart adapter %s due to status read " | |
962 | "buffer shortage\n", | |
963 | zfcp_get_busid_by_adapter(adapter)); | |
964 | zfcp_erp_adapter_reopen(adapter, 0); | |
965 | } | |
966 | } | |
967 | out: | |
968 | return retval; | |
969 | } | |
970 | ||
971 | /* | |
972 | * function: zfcp_fsf_abort_fcp_command | |
973 | * | |
974 | * purpose: tells FSF to abort a running SCSI command | |
975 | * | |
976 | * returns: address of initiated FSF request | |
977 | * NULL - request could not be initiated | |
978 | * | |
979 | * FIXME(design): should be watched by a timeout !!! | |
980 | * FIXME(design) shouldn't this be modified to return an int | |
981 | * also...don't know how though | |
982 | */ | |
983 | struct zfcp_fsf_req * | |
984 | zfcp_fsf_abort_fcp_command(unsigned long old_req_id, | |
985 | struct zfcp_adapter *adapter, | |
986 | struct zfcp_unit *unit, int req_flags) | |
987 | { | |
988 | volatile struct qdio_buffer_element *sbale; | |
989 | unsigned long lock_flags; | |
990 | struct zfcp_fsf_req *fsf_req = NULL; | |
991 | int retval = 0; | |
992 | ||
993 | /* setup new FSF request */ | |
994 | retval = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, | |
995 | req_flags, adapter->pool.fsf_req_abort, | |
996 | &lock_flags, &fsf_req); | |
997 | if (retval < 0) { | |
998 | ZFCP_LOG_INFO("error: Failed to create an abort command " | |
999 | "request for lun 0x%016Lx on port 0x%016Lx " | |
1000 | "on adapter %s.\n", | |
1001 | unit->fcp_lun, | |
1002 | unit->port->wwpn, | |
1003 | zfcp_get_busid_by_adapter(adapter)); | |
1004 | goto out; | |
1005 | } | |
1006 | ||
1007 | sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); | |
1008 | sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; | |
1009 | sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; | |
1010 | ||
059c97d0 | 1011 | fsf_req->data = (unsigned long) unit; |
1da177e4 LT |
1012 | |
1013 | /* set handles of unit and its parent port in QTCB */ | |
1014 | fsf_req->qtcb->header.lun_handle = unit->handle; | |
1015 | fsf_req->qtcb->header.port_handle = unit->port->handle; | |
1016 | ||
1017 | /* set handle of request which should be aborted */ | |
1018 | fsf_req->qtcb->bottom.support.req_handle = (u64) old_req_id; | |
1019 | ||
1020 | /* start QDIO request for this FSF request */ | |
1021 | ||
1022 | zfcp_fsf_start_scsi_er_timer(adapter); | |
1023 | retval = zfcp_fsf_req_send(fsf_req, NULL); | |
1024 | if (retval) { | |
1025 | del_timer(&adapter->scsi_er_timer); | |
1026 | ZFCP_LOG_INFO("error: Failed to send abort command request " | |
1027 | "on adapter %s, port 0x%016Lx, unit 0x%016Lx\n", | |
1028 | zfcp_get_busid_by_adapter(adapter), | |
1029 | unit->port->wwpn, unit->fcp_lun); | |
1030 | zfcp_fsf_req_free(fsf_req); | |
1031 | fsf_req = NULL; | |
1032 | goto out; | |
1033 | } | |
1034 | ||
1035 | ZFCP_LOG_DEBUG("Abort FCP Command request initiated " | |
1036 | "(adapter%s, port d_id=0x%08x, " | |
1037 | "unit x%016Lx, old_req_id=0x%lx)\n", | |
1038 | zfcp_get_busid_by_adapter(adapter), | |
1039 | unit->port->d_id, | |
1040 | unit->fcp_lun, old_req_id); | |
1041 | out: | |
1042 | write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); | |
1043 | return fsf_req; | |
1044 | } | |
1045 | ||
1046 | /* | |
1047 | * function: zfcp_fsf_abort_fcp_command_handler | |
1048 | * | |
1049 | * purpose: is called for finished Abort FCP Command request | |
1050 | * | |
1051 | * returns: | |
1052 | */ | |
1053 | static int | |
1054 | zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *new_fsf_req) | |
1055 | { | |
1056 | int retval = -EINVAL; | |
059c97d0 | 1057 | struct zfcp_unit *unit; |
1da177e4 LT |
1058 | unsigned char status_qual = |
1059 | new_fsf_req->qtcb->header.fsf_status_qual.word[0]; | |
1060 | ||
1061 | del_timer(&new_fsf_req->adapter->scsi_er_timer); | |
1062 | ||
1063 | if (new_fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { | |
1064 | /* do not set ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED */ | |
1065 | goto skip_fsfstatus; | |
1066 | } | |
1067 | ||
059c97d0 AH |
1068 | unit = (struct zfcp_unit *) new_fsf_req->data; |
1069 | ||
1da177e4 LT |
1070 | /* evaluate FSF status in QTCB */ |
1071 | switch (new_fsf_req->qtcb->header.fsf_status) { | |
1072 | ||
1073 | case FSF_PORT_HANDLE_NOT_VALID: | |
1074 | if (status_qual >> 4 != status_qual % 0xf) { | |
1da177e4 LT |
1075 | debug_text_event(new_fsf_req->adapter->erp_dbf, 3, |
1076 | "fsf_s_phand_nv0"); | |
1077 | /* | |
1078 | * In this case a command that was sent prior to a port | |
1079 | * reopen was aborted (handles are different). This is | |
1080 | * fine. | |
1081 | */ | |
1082 | } else { | |
1da177e4 LT |
1083 | ZFCP_LOG_INFO("Temporary port identifier 0x%x for " |
1084 | "port 0x%016Lx on adapter %s invalid. " | |
1085 | "This may happen occasionally.\n", | |
1086 | unit->port->handle, | |
1087 | unit->port->wwpn, | |
1088 | zfcp_get_busid_by_unit(unit)); | |
1089 | ZFCP_LOG_INFO("status qualifier:\n"); | |
1090 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO, | |
1091 | (char *) &new_fsf_req->qtcb->header. | |
1092 | fsf_status_qual, | |
1093 | sizeof (union fsf_status_qual)); | |
1094 | /* Let's hope this sorts out the mess */ | |
1095 | debug_text_event(new_fsf_req->adapter->erp_dbf, 1, | |
1096 | "fsf_s_phand_nv1"); | |
1097 | zfcp_erp_adapter_reopen(unit->port->adapter, 0); | |
1098 | new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1099 | } | |
1100 | break; | |
1101 | ||
1102 | case FSF_LUN_HANDLE_NOT_VALID: | |
1103 | if (status_qual >> 4 != status_qual % 0xf) { | |
1104 | /* 2 */ | |
1da177e4 LT |
1105 | debug_text_event(new_fsf_req->adapter->erp_dbf, 3, |
1106 | "fsf_s_lhand_nv0"); | |
1107 | /* | |
1108 | * In this case a command that was sent prior to a unit | |
1109 | * reopen was aborted (handles are different). | |
1110 | * This is fine. | |
1111 | */ | |
1112 | } else { | |
1da177e4 LT |
1113 | ZFCP_LOG_INFO |
1114 | ("Warning: Temporary LUN identifier 0x%x of LUN " | |
1115 | "0x%016Lx on port 0x%016Lx on adapter %s is " | |
1116 | "invalid. This may happen in rare cases. " | |
1117 | "Trying to re-establish link.\n", | |
1118 | unit->handle, | |
1119 | unit->fcp_lun, | |
1120 | unit->port->wwpn, | |
1121 | zfcp_get_busid_by_unit(unit)); | |
1122 | ZFCP_LOG_DEBUG("Status qualifier data:\n"); | |
1123 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
1124 | (char *) &new_fsf_req->qtcb->header. | |
1125 | fsf_status_qual, | |
1126 | sizeof (union fsf_status_qual)); | |
1127 | /* Let's hope this sorts out the mess */ | |
1128 | debug_text_event(new_fsf_req->adapter->erp_dbf, 1, | |
1129 | "fsf_s_lhand_nv1"); | |
1130 | zfcp_erp_port_reopen(unit->port, 0); | |
1131 | new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1132 | } | |
1133 | break; | |
1134 | ||
1135 | case FSF_FCP_COMMAND_DOES_NOT_EXIST: | |
1da177e4 LT |
1136 | retval = 0; |
1137 | debug_text_event(new_fsf_req->adapter->erp_dbf, 3, | |
1138 | "fsf_s_no_exist"); | |
1139 | new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED; | |
1140 | break; | |
1141 | ||
1142 | case FSF_PORT_BOXED: | |
1da177e4 LT |
1143 | ZFCP_LOG_INFO("Remote port 0x%016Lx on adapter %s needs to " |
1144 | "be reopened\n", unit->port->wwpn, | |
1145 | zfcp_get_busid_by_unit(unit)); | |
1146 | debug_text_event(new_fsf_req->adapter->erp_dbf, 2, | |
1147 | "fsf_s_pboxed"); | |
d736a27b | 1148 | zfcp_erp_port_boxed(unit->port); |
1da177e4 LT |
1149 | new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR |
1150 | | ZFCP_STATUS_FSFREQ_RETRY; | |
1151 | break; | |
1152 | ||
1153 | case FSF_LUN_BOXED: | |
1da177e4 LT |
1154 | ZFCP_LOG_INFO( |
1155 | "unit 0x%016Lx on port 0x%016Lx on adapter %s needs " | |
1156 | "to be reopened\n", | |
1157 | unit->fcp_lun, unit->port->wwpn, | |
1158 | zfcp_get_busid_by_unit(unit)); | |
1159 | debug_text_event(new_fsf_req->adapter->erp_dbf, 1, "fsf_s_lboxed"); | |
d736a27b | 1160 | zfcp_erp_unit_boxed(unit); |
1da177e4 LT |
1161 | new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR |
1162 | | ZFCP_STATUS_FSFREQ_RETRY; | |
1163 | break; | |
1164 | ||
1165 | case FSF_ADAPTER_STATUS_AVAILABLE: | |
1da177e4 LT |
1166 | switch (new_fsf_req->qtcb->header.fsf_status_qual.word[0]) { |
1167 | case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: | |
1da177e4 LT |
1168 | debug_text_event(new_fsf_req->adapter->erp_dbf, 1, |
1169 | "fsf_sq_ltest"); | |
65a8d4e1 | 1170 | zfcp_test_link(unit->port); |
1da177e4 LT |
1171 | new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
1172 | break; | |
1173 | case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: | |
1da177e4 LT |
1174 | /* SCSI stack will escalate */ |
1175 | debug_text_event(new_fsf_req->adapter->erp_dbf, 1, | |
1176 | "fsf_sq_ulp"); | |
1177 | new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1178 | break; | |
1179 | default: | |
1180 | ZFCP_LOG_NORMAL | |
1181 | ("bug: Wrong status qualifier 0x%x arrived.\n", | |
1182 | new_fsf_req->qtcb->header.fsf_status_qual.word[0]); | |
1183 | debug_text_event(new_fsf_req->adapter->erp_dbf, 0, | |
1184 | "fsf_sq_inval:"); | |
1185 | debug_exception(new_fsf_req->adapter->erp_dbf, 0, | |
1186 | &new_fsf_req->qtcb->header. | |
1187 | fsf_status_qual.word[0], sizeof (u32)); | |
1188 | break; | |
1189 | } | |
1190 | break; | |
1191 | ||
1192 | case FSF_GOOD: | |
1da177e4 LT |
1193 | retval = 0; |
1194 | new_fsf_req->status |= ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED; | |
1195 | break; | |
1196 | ||
1197 | default: | |
1198 | ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " | |
1199 | "(debug info 0x%x)\n", | |
1200 | new_fsf_req->qtcb->header.fsf_status); | |
1201 | debug_text_event(new_fsf_req->adapter->erp_dbf, 0, | |
1202 | "fsf_s_inval:"); | |
1203 | debug_exception(new_fsf_req->adapter->erp_dbf, 0, | |
1204 | &new_fsf_req->qtcb->header.fsf_status, | |
1205 | sizeof (u32)); | |
1206 | break; | |
1207 | } | |
1208 | skip_fsfstatus: | |
1209 | return retval; | |
1210 | } | |
1211 | ||
1212 | /** | |
1213 | * zfcp_use_one_sbal - checks whether req buffer and resp bother each fit into | |
1214 | * one SBALE | |
1215 | * Two scatter-gather lists are passed, one for the reqeust and one for the | |
1216 | * response. | |
1217 | */ | |
1218 | static inline int | |
1219 | zfcp_use_one_sbal(struct scatterlist *req, int req_count, | |
1220 | struct scatterlist *resp, int resp_count) | |
1221 | { | |
1222 | return ((req_count == 1) && | |
1223 | (resp_count == 1) && | |
1224 | (((unsigned long) zfcp_sg_to_address(&req[0]) & | |
1225 | PAGE_MASK) == | |
1226 | ((unsigned long) (zfcp_sg_to_address(&req[0]) + | |
1227 | req[0].length - 1) & PAGE_MASK)) && | |
1228 | (((unsigned long) zfcp_sg_to_address(&resp[0]) & | |
1229 | PAGE_MASK) == | |
1230 | ((unsigned long) (zfcp_sg_to_address(&resp[0]) + | |
1231 | resp[0].length - 1) & PAGE_MASK))); | |
1232 | } | |
1233 | ||
1234 | /** | |
1235 | * zfcp_fsf_send_ct - initiate a Generic Service request (FC-GS) | |
1236 | * @ct: pointer to struct zfcp_send_ct which conatins all needed data for | |
1237 | * the request | |
1238 | * @pool: pointer to memory pool, if non-null this pool is used to allocate | |
1239 | * a struct zfcp_fsf_req | |
1240 | * @erp_action: pointer to erp_action, if non-null the Generic Service request | |
1241 | * is sent within error recovery | |
1242 | */ | |
1243 | int | |
1244 | zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool, | |
1245 | struct zfcp_erp_action *erp_action) | |
1246 | { | |
1247 | volatile struct qdio_buffer_element *sbale; | |
1248 | struct zfcp_port *port; | |
1249 | struct zfcp_adapter *adapter; | |
1250 | struct zfcp_fsf_req *fsf_req; | |
1251 | unsigned long lock_flags; | |
1252 | int bytes; | |
1253 | int ret = 0; | |
1254 | ||
1255 | port = ct->port; | |
1256 | adapter = port->adapter; | |
1257 | ||
1258 | ret = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC, | |
1259 | ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, | |
1260 | pool, &lock_flags, &fsf_req); | |
1261 | if (ret < 0) { | |
1262 | ZFCP_LOG_INFO("error: Could not create CT request (FC-GS) for " | |
1263 | "adapter: %s\n", | |
1264 | zfcp_get_busid_by_adapter(adapter)); | |
1265 | goto failed_req; | |
1266 | } | |
1267 | ||
1268 | if (erp_action != NULL) { | |
1269 | erp_action->fsf_req = fsf_req; | |
1270 | fsf_req->erp_action = erp_action; | |
1271 | } | |
1272 | ||
1273 | sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); | |
1274 | if (zfcp_use_one_sbal(ct->req, ct->req_count, | |
1275 | ct->resp, ct->resp_count)){ | |
1276 | /* both request buffer and response buffer | |
1277 | fit into one sbale each */ | |
1278 | sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ; | |
1279 | sbale[2].addr = zfcp_sg_to_address(&ct->req[0]); | |
1280 | sbale[2].length = ct->req[0].length; | |
1281 | sbale[3].addr = zfcp_sg_to_address(&ct->resp[0]); | |
1282 | sbale[3].length = ct->resp[0].length; | |
1283 | sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY; | |
1284 | } else if (adapter->supported_features & | |
1285 | FSF_FEATURE_ELS_CT_CHAINED_SBALS) { | |
1286 | /* try to use chained SBALs */ | |
1287 | bytes = zfcp_qdio_sbals_from_sg(fsf_req, | |
1288 | SBAL_FLAGS0_TYPE_WRITE_READ, | |
1289 | ct->req, ct->req_count, | |
1290 | ZFCP_MAX_SBALS_PER_CT_REQ); | |
1291 | if (bytes <= 0) { | |
1292 | ZFCP_LOG_INFO("error: creation of CT request failed " | |
1293 | "on adapter %s\n", | |
1294 | zfcp_get_busid_by_adapter(adapter)); | |
1295 | if (bytes == 0) | |
1296 | ret = -ENOMEM; | |
1297 | else | |
1298 | ret = bytes; | |
1299 | ||
1300 | goto failed_send; | |
1301 | } | |
1302 | fsf_req->qtcb->bottom.support.req_buf_length = bytes; | |
1303 | fsf_req->sbale_curr = ZFCP_LAST_SBALE_PER_SBAL; | |
1304 | bytes = zfcp_qdio_sbals_from_sg(fsf_req, | |
1305 | SBAL_FLAGS0_TYPE_WRITE_READ, | |
1306 | ct->resp, ct->resp_count, | |
1307 | ZFCP_MAX_SBALS_PER_CT_REQ); | |
1308 | if (bytes <= 0) { | |
1309 | ZFCP_LOG_INFO("error: creation of CT request failed " | |
1310 | "on adapter %s\n", | |
1311 | zfcp_get_busid_by_adapter(adapter)); | |
1312 | if (bytes == 0) | |
1313 | ret = -ENOMEM; | |
1314 | else | |
1315 | ret = bytes; | |
1316 | ||
1317 | goto failed_send; | |
1318 | } | |
1319 | fsf_req->qtcb->bottom.support.resp_buf_length = bytes; | |
1320 | } else { | |
1321 | /* reject send generic request */ | |
1322 | ZFCP_LOG_INFO( | |
1323 | "error: microcode does not support chained SBALs," | |
1324 | "CT request too big (adapter %s)\n", | |
1325 | zfcp_get_busid_by_adapter(adapter)); | |
1326 | ret = -EOPNOTSUPP; | |
1327 | goto failed_send; | |
1328 | } | |
1329 | ||
1330 | /* settings in QTCB */ | |
1331 | fsf_req->qtcb->header.port_handle = port->handle; | |
1332 | fsf_req->qtcb->bottom.support.service_class = adapter->fc_service_class; | |
1333 | fsf_req->qtcb->bottom.support.timeout = ct->timeout; | |
059c97d0 | 1334 | fsf_req->data = (unsigned long) ct; |
1da177e4 | 1335 | |
8a36e453 MS |
1336 | zfcp_san_dbf_event_ct_request(fsf_req); |
1337 | ||
1da177e4 LT |
1338 | /* start QDIO request for this FSF request */ |
1339 | ret = zfcp_fsf_req_send(fsf_req, ct->timer); | |
1340 | if (ret) { | |
1341 | ZFCP_LOG_DEBUG("error: initiation of CT request failed " | |
1342 | "(adapter %s, port 0x%016Lx)\n", | |
1343 | zfcp_get_busid_by_adapter(adapter), port->wwpn); | |
1344 | goto failed_send; | |
1345 | } | |
1346 | ||
1347 | ZFCP_LOG_DEBUG("CT request initiated (adapter %s, port 0x%016Lx)\n", | |
1348 | zfcp_get_busid_by_adapter(adapter), port->wwpn); | |
1349 | goto out; | |
1350 | ||
1351 | failed_send: | |
1352 | zfcp_fsf_req_free(fsf_req); | |
1353 | if (erp_action != NULL) { | |
1354 | erp_action->fsf_req = NULL; | |
1355 | } | |
1356 | failed_req: | |
1357 | out: | |
1358 | write_unlock_irqrestore(&adapter->request_queue.queue_lock, | |
1359 | lock_flags); | |
1360 | return ret; | |
1361 | } | |
1362 | ||
1363 | /** | |
1364 | * zfcp_fsf_send_ct_handler - handler for Generic Service requests | |
1365 | * @fsf_req: pointer to struct zfcp_fsf_req | |
1366 | * | |
059c97d0 AH |
1367 | * Data specific for the Generic Service request is passed using |
1368 | * fsf_req->data. There we find the pointer to struct zfcp_send_ct. | |
1369 | * Usually a specific handler for the CT request is called which is | |
1370 | * found in this structure. | |
1da177e4 LT |
1371 | */ |
1372 | static int | |
1373 | zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *fsf_req) | |
1374 | { | |
1375 | struct zfcp_port *port; | |
1376 | struct zfcp_adapter *adapter; | |
1377 | struct zfcp_send_ct *send_ct; | |
1378 | struct fsf_qtcb_header *header; | |
1379 | struct fsf_qtcb_bottom_support *bottom; | |
1380 | int retval = -EINVAL; | |
1381 | u16 subtable, rule, counter; | |
1382 | ||
1383 | adapter = fsf_req->adapter; | |
059c97d0 | 1384 | send_ct = (struct zfcp_send_ct *) fsf_req->data; |
1da177e4 LT |
1385 | port = send_ct->port; |
1386 | header = &fsf_req->qtcb->header; | |
1387 | bottom = &fsf_req->qtcb->bottom.support; | |
1388 | ||
1389 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) | |
1390 | goto skip_fsfstatus; | |
1391 | ||
1392 | /* evaluate FSF status in QTCB */ | |
1393 | switch (header->fsf_status) { | |
1394 | ||
1395 | case FSF_GOOD: | |
8a36e453 | 1396 | zfcp_san_dbf_event_ct_response(fsf_req); |
1da177e4 LT |
1397 | retval = 0; |
1398 | break; | |
1399 | ||
1400 | case FSF_SERVICE_CLASS_NOT_SUPPORTED: | |
1da177e4 LT |
1401 | if (adapter->fc_service_class <= 3) { |
1402 | ZFCP_LOG_INFO("error: adapter %s does not support fc " | |
1403 | "class %d.\n", | |
1404 | zfcp_get_busid_by_port(port), | |
1405 | adapter->fc_service_class); | |
1406 | } else { | |
1407 | ZFCP_LOG_INFO("bug: The fibre channel class at the " | |
1408 | "adapter %s is invalid. " | |
1409 | "(debug info %d)\n", | |
1410 | zfcp_get_busid_by_port(port), | |
1411 | adapter->fc_service_class); | |
1412 | } | |
1413 | /* stop operation for this adapter */ | |
1414 | debug_text_exception(adapter->erp_dbf, 0, "fsf_s_class_nsup"); | |
1415 | zfcp_erp_adapter_shutdown(adapter, 0); | |
1416 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1417 | break; | |
1418 | ||
1419 | case FSF_ADAPTER_STATUS_AVAILABLE: | |
1da177e4 LT |
1420 | switch (header->fsf_status_qual.word[0]){ |
1421 | case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: | |
1da177e4 LT |
1422 | /* reopening link to port */ |
1423 | debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ltest"); | |
1424 | zfcp_test_link(port); | |
1425 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1426 | break; | |
1427 | case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: | |
1da177e4 LT |
1428 | /* ERP strategy will escalate */ |
1429 | debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ulp"); | |
1430 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1431 | break; | |
1432 | default: | |
1433 | ZFCP_LOG_INFO("bug: Wrong status qualifier 0x%x " | |
1434 | "arrived.\n", | |
1435 | header->fsf_status_qual.word[0]); | |
1436 | break; | |
1437 | } | |
1438 | break; | |
1439 | ||
1440 | case FSF_ACCESS_DENIED: | |
1da177e4 LT |
1441 | ZFCP_LOG_NORMAL("access denied, cannot send generic service " |
1442 | "command (adapter %s, port d_id=0x%08x)\n", | |
1443 | zfcp_get_busid_by_port(port), port->d_id); | |
1444 | for (counter = 0; counter < 2; counter++) { | |
1445 | subtable = header->fsf_status_qual.halfword[counter * 2]; | |
1446 | rule = header->fsf_status_qual.halfword[counter * 2 + 1]; | |
1447 | switch (subtable) { | |
1448 | case FSF_SQ_CFDC_SUBTABLE_OS: | |
1449 | case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: | |
1450 | case FSF_SQ_CFDC_SUBTABLE_PORT_DID: | |
1451 | case FSF_SQ_CFDC_SUBTABLE_LUN: | |
1452 | ZFCP_LOG_INFO("Access denied (%s rule %d)\n", | |
1453 | zfcp_act_subtable_type[subtable], rule); | |
1454 | break; | |
1455 | } | |
1456 | } | |
1457 | debug_text_event(adapter->erp_dbf, 1, "fsf_s_access"); | |
1458 | zfcp_erp_port_access_denied(port); | |
1459 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1460 | break; | |
1461 | ||
1462 | case FSF_GENERIC_COMMAND_REJECTED: | |
1da177e4 LT |
1463 | ZFCP_LOG_INFO("generic service command rejected " |
1464 | "(adapter %s, port d_id=0x%08x)\n", | |
1465 | zfcp_get_busid_by_port(port), port->d_id); | |
1466 | ZFCP_LOG_INFO("status qualifier:\n"); | |
1467 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO, | |
1468 | (char *) &header->fsf_status_qual, | |
1469 | sizeof (union fsf_status_qual)); | |
1470 | debug_text_event(adapter->erp_dbf, 1, "fsf_s_gcom_rej"); | |
1471 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1472 | break; | |
1473 | ||
1474 | case FSF_PORT_HANDLE_NOT_VALID: | |
1da177e4 LT |
1475 | ZFCP_LOG_DEBUG("Temporary port identifier 0x%x for port " |
1476 | "0x%016Lx on adapter %s invalid. This may " | |
1477 | "happen occasionally.\n", port->handle, | |
1478 | port->wwpn, zfcp_get_busid_by_port(port)); | |
1479 | ZFCP_LOG_INFO("status qualifier:\n"); | |
1480 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO, | |
1481 | (char *) &header->fsf_status_qual, | |
1482 | sizeof (union fsf_status_qual)); | |
1483 | debug_text_event(adapter->erp_dbf, 1, "fsf_s_phandle_nv"); | |
1484 | zfcp_erp_adapter_reopen(adapter, 0); | |
1485 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1486 | break; | |
1487 | ||
1488 | case FSF_PORT_BOXED: | |
1da177e4 LT |
1489 | ZFCP_LOG_INFO("port needs to be reopened " |
1490 | "(adapter %s, port d_id=0x%08x)\n", | |
1491 | zfcp_get_busid_by_port(port), port->d_id); | |
1492 | debug_text_event(adapter->erp_dbf, 2, "fsf_s_pboxed"); | |
d736a27b | 1493 | zfcp_erp_port_boxed(port); |
1da177e4 LT |
1494 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR |
1495 | | ZFCP_STATUS_FSFREQ_RETRY; | |
1496 | break; | |
1497 | ||
1498 | /* following states should never occure, all cases avoided | |
1499 | in zfcp_fsf_send_ct - but who knows ... */ | |
1500 | case FSF_PAYLOAD_SIZE_MISMATCH: | |
1da177e4 LT |
1501 | ZFCP_LOG_INFO("payload size mismatch (adapter: %s, " |
1502 | "req_buf_length=%d, resp_buf_length=%d)\n", | |
1503 | zfcp_get_busid_by_adapter(adapter), | |
1504 | bottom->req_buf_length, bottom->resp_buf_length); | |
1505 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1506 | break; | |
1507 | case FSF_REQUEST_SIZE_TOO_LARGE: | |
1da177e4 LT |
1508 | ZFCP_LOG_INFO("request size too large (adapter: %s, " |
1509 | "req_buf_length=%d)\n", | |
1510 | zfcp_get_busid_by_adapter(adapter), | |
1511 | bottom->req_buf_length); | |
1512 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1513 | break; | |
1514 | case FSF_RESPONSE_SIZE_TOO_LARGE: | |
1da177e4 LT |
1515 | ZFCP_LOG_INFO("response size too large (adapter: %s, " |
1516 | "resp_buf_length=%d)\n", | |
1517 | zfcp_get_busid_by_adapter(adapter), | |
1518 | bottom->resp_buf_length); | |
1519 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1520 | break; | |
1521 | case FSF_SBAL_MISMATCH: | |
1da177e4 LT |
1522 | ZFCP_LOG_INFO("SBAL mismatch (adapter: %s, req_buf_length=%d, " |
1523 | "resp_buf_length=%d)\n", | |
1524 | zfcp_get_busid_by_adapter(adapter), | |
1525 | bottom->req_buf_length, bottom->resp_buf_length); | |
1526 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1527 | break; | |
1528 | ||
1529 | default: | |
1530 | ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " | |
1531 | "(debug info 0x%x)\n", header->fsf_status); | |
1532 | debug_text_event(adapter->erp_dbf, 0, "fsf_sq_inval:"); | |
1533 | debug_exception(adapter->erp_dbf, 0, | |
1534 | &header->fsf_status_qual.word[0], sizeof (u32)); | |
1535 | break; | |
1536 | } | |
1537 | ||
1538 | skip_fsfstatus: | |
1539 | send_ct->status = retval; | |
1540 | ||
1541 | if (send_ct->handler != NULL) | |
1542 | send_ct->handler(send_ct->handler_data); | |
1543 | ||
1544 | return retval; | |
1545 | } | |
1546 | ||
1547 | /** | |
1548 | * zfcp_fsf_send_els - initiate an ELS command (FC-FS) | |
1549 | * @els: pointer to struct zfcp_send_els which contains all needed data for | |
1550 | * the command. | |
1551 | */ | |
1552 | int | |
1553 | zfcp_fsf_send_els(struct zfcp_send_els *els) | |
1554 | { | |
1555 | volatile struct qdio_buffer_element *sbale; | |
1556 | struct zfcp_fsf_req *fsf_req; | |
1557 | fc_id_t d_id; | |
1558 | struct zfcp_adapter *adapter; | |
1559 | unsigned long lock_flags; | |
1560 | int bytes; | |
1561 | int ret = 0; | |
1562 | ||
1563 | d_id = els->d_id; | |
1564 | adapter = els->adapter; | |
1565 | ||
1566 | ret = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS, | |
1567 | ZFCP_REQ_AUTO_CLEANUP, | |
1568 | NULL, &lock_flags, &fsf_req); | |
1569 | if (ret < 0) { | |
1570 | ZFCP_LOG_INFO("error: creation of ELS request failed " | |
1571 | "(adapter %s, port d_id: 0x%08x)\n", | |
1572 | zfcp_get_busid_by_adapter(adapter), d_id); | |
1573 | goto failed_req; | |
1574 | } | |
1575 | ||
1576 | sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); | |
1577 | if (zfcp_use_one_sbal(els->req, els->req_count, | |
1578 | els->resp, els->resp_count)){ | |
1579 | /* both request buffer and response buffer | |
1580 | fit into one sbale each */ | |
1581 | sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ; | |
1582 | sbale[2].addr = zfcp_sg_to_address(&els->req[0]); | |
1583 | sbale[2].length = els->req[0].length; | |
1584 | sbale[3].addr = zfcp_sg_to_address(&els->resp[0]); | |
1585 | sbale[3].length = els->resp[0].length; | |
1586 | sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY; | |
1587 | } else if (adapter->supported_features & | |
1588 | FSF_FEATURE_ELS_CT_CHAINED_SBALS) { | |
1589 | /* try to use chained SBALs */ | |
1590 | bytes = zfcp_qdio_sbals_from_sg(fsf_req, | |
1591 | SBAL_FLAGS0_TYPE_WRITE_READ, | |
1592 | els->req, els->req_count, | |
1593 | ZFCP_MAX_SBALS_PER_ELS_REQ); | |
1594 | if (bytes <= 0) { | |
1595 | ZFCP_LOG_INFO("error: creation of ELS request failed " | |
1596 | "(adapter %s, port d_id: 0x%08x)\n", | |
1597 | zfcp_get_busid_by_adapter(adapter), d_id); | |
1598 | if (bytes == 0) { | |
1599 | ret = -ENOMEM; | |
1600 | } else { | |
1601 | ret = bytes; | |
1602 | } | |
1603 | goto failed_send; | |
1604 | } | |
1605 | fsf_req->qtcb->bottom.support.req_buf_length = bytes; | |
1606 | fsf_req->sbale_curr = ZFCP_LAST_SBALE_PER_SBAL; | |
1607 | bytes = zfcp_qdio_sbals_from_sg(fsf_req, | |
1608 | SBAL_FLAGS0_TYPE_WRITE_READ, | |
1609 | els->resp, els->resp_count, | |
1610 | ZFCP_MAX_SBALS_PER_ELS_REQ); | |
1611 | if (bytes <= 0) { | |
1612 | ZFCP_LOG_INFO("error: creation of ELS request failed " | |
1613 | "(adapter %s, port d_id: 0x%08x)\n", | |
1614 | zfcp_get_busid_by_adapter(adapter), d_id); | |
1615 | if (bytes == 0) { | |
1616 | ret = -ENOMEM; | |
1617 | } else { | |
1618 | ret = bytes; | |
1619 | } | |
1620 | goto failed_send; | |
1621 | } | |
1622 | fsf_req->qtcb->bottom.support.resp_buf_length = bytes; | |
1623 | } else { | |
1624 | /* reject request */ | |
1625 | ZFCP_LOG_INFO("error: microcode does not support chained SBALs" | |
1626 | ", ELS request too big (adapter %s, " | |
1627 | "port d_id: 0x%08x)\n", | |
1628 | zfcp_get_busid_by_adapter(adapter), d_id); | |
1629 | ret = -EOPNOTSUPP; | |
1630 | goto failed_send; | |
1631 | } | |
1632 | ||
1633 | /* settings in QTCB */ | |
1634 | fsf_req->qtcb->bottom.support.d_id = d_id; | |
1635 | fsf_req->qtcb->bottom.support.service_class = adapter->fc_service_class; | |
1636 | fsf_req->qtcb->bottom.support.timeout = ZFCP_ELS_TIMEOUT; | |
059c97d0 | 1637 | fsf_req->data = (unsigned long) els; |
1da177e4 LT |
1638 | |
1639 | sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); | |
1640 | ||
8a36e453 MS |
1641 | zfcp_san_dbf_event_els_request(fsf_req); |
1642 | ||
1da177e4 LT |
1643 | /* start QDIO request for this FSF request */ |
1644 | ret = zfcp_fsf_req_send(fsf_req, els->timer); | |
1645 | if (ret) { | |
1646 | ZFCP_LOG_DEBUG("error: initiation of ELS request failed " | |
1647 | "(adapter %s, port d_id: 0x%08x)\n", | |
1648 | zfcp_get_busid_by_adapter(adapter), d_id); | |
1649 | goto failed_send; | |
1650 | } | |
1651 | ||
1652 | ZFCP_LOG_DEBUG("ELS request initiated (adapter %s, port d_id: " | |
1653 | "0x%08x)\n", zfcp_get_busid_by_adapter(adapter), d_id); | |
1654 | goto out; | |
1655 | ||
1656 | failed_send: | |
1657 | zfcp_fsf_req_free(fsf_req); | |
1658 | ||
1659 | failed_req: | |
1660 | out: | |
1661 | write_unlock_irqrestore(&adapter->request_queue.queue_lock, | |
1662 | lock_flags); | |
1663 | ||
1664 | return ret; | |
1665 | } | |
1666 | ||
1667 | /** | |
1668 | * zfcp_fsf_send_els_handler - handler for ELS commands | |
1669 | * @fsf_req: pointer to struct zfcp_fsf_req | |
1670 | * | |
059c97d0 AH |
1671 | * Data specific for the ELS command is passed using |
1672 | * fsf_req->data. There we find the pointer to struct zfcp_send_els. | |
1673 | * Usually a specific handler for the ELS command is called which is | |
1674 | * found in this structure. | |
1da177e4 LT |
1675 | */ |
1676 | static int zfcp_fsf_send_els_handler(struct zfcp_fsf_req *fsf_req) | |
1677 | { | |
1678 | struct zfcp_adapter *adapter; | |
1da177e4 | 1679 | struct zfcp_port *port; |
64b29a13 | 1680 | fc_id_t d_id; |
1da177e4 LT |
1681 | struct fsf_qtcb_header *header; |
1682 | struct fsf_qtcb_bottom_support *bottom; | |
1683 | struct zfcp_send_els *send_els; | |
1684 | int retval = -EINVAL; | |
1685 | u16 subtable, rule, counter; | |
1686 | ||
059c97d0 | 1687 | send_els = (struct zfcp_send_els *) fsf_req->data; |
1da177e4 | 1688 | adapter = send_els->adapter; |
64b29a13 | 1689 | port = send_els->port; |
1da177e4 LT |
1690 | d_id = send_els->d_id; |
1691 | header = &fsf_req->qtcb->header; | |
1692 | bottom = &fsf_req->qtcb->bottom.support; | |
1693 | ||
1694 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) | |
1695 | goto skip_fsfstatus; | |
1696 | ||
1697 | switch (header->fsf_status) { | |
1698 | ||
1699 | case FSF_GOOD: | |
8a36e453 | 1700 | zfcp_san_dbf_event_els_response(fsf_req); |
1da177e4 LT |
1701 | retval = 0; |
1702 | break; | |
1703 | ||
1704 | case FSF_SERVICE_CLASS_NOT_SUPPORTED: | |
1da177e4 LT |
1705 | if (adapter->fc_service_class <= 3) { |
1706 | ZFCP_LOG_INFO("error: adapter %s does " | |
1707 | "not support fibrechannel class %d.\n", | |
1708 | zfcp_get_busid_by_adapter(adapter), | |
1709 | adapter->fc_service_class); | |
1710 | } else { | |
1711 | ZFCP_LOG_INFO("bug: The fibrechannel class at " | |
1712 | "adapter %s is invalid. " | |
1713 | "(debug info %d)\n", | |
1714 | zfcp_get_busid_by_adapter(adapter), | |
1715 | adapter->fc_service_class); | |
1716 | } | |
1717 | /* stop operation for this adapter */ | |
1718 | debug_text_exception(adapter->erp_dbf, 0, "fsf_s_class_nsup"); | |
1719 | zfcp_erp_adapter_shutdown(adapter, 0); | |
1720 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1721 | break; | |
1722 | ||
1723 | case FSF_ADAPTER_STATUS_AVAILABLE: | |
1da177e4 LT |
1724 | switch (header->fsf_status_qual.word[0]){ |
1725 | case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: | |
1da177e4 | 1726 | debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ltest"); |
64b29a13 AH |
1727 | if (port && (send_els->ls_code != ZFCP_LS_ADISC)) |
1728 | zfcp_test_link(port); | |
1da177e4 LT |
1729 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
1730 | break; | |
1731 | case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: | |
1da177e4 LT |
1732 | debug_text_event(adapter->erp_dbf, 1, "fsf_sq_ulp"); |
1733 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1734 | retval = | |
1735 | zfcp_handle_els_rjt(header->fsf_status_qual.word[1], | |
1736 | (struct zfcp_ls_rjt_par *) | |
1737 | &header->fsf_status_qual.word[2]); | |
1738 | break; | |
1739 | case FSF_SQ_RETRY_IF_POSSIBLE: | |
1da177e4 LT |
1740 | debug_text_event(adapter->erp_dbf, 1, "fsf_sq_retry"); |
1741 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1742 | break; | |
1743 | default: | |
1744 | ZFCP_LOG_INFO("bug: Wrong status qualifier 0x%x\n", | |
1745 | header->fsf_status_qual.word[0]); | |
1746 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO, | |
1747 | (char*)header->fsf_status_qual.word, 16); | |
1748 | } | |
1749 | break; | |
1750 | ||
1751 | case FSF_ELS_COMMAND_REJECTED: | |
1da177e4 LT |
1752 | ZFCP_LOG_INFO("ELS has been rejected because command filter " |
1753 | "prohibited sending " | |
1754 | "(adapter: %s, port d_id: 0x%08x)\n", | |
1755 | zfcp_get_busid_by_adapter(adapter), d_id); | |
1756 | ||
1757 | break; | |
1758 | ||
1759 | case FSF_PAYLOAD_SIZE_MISMATCH: | |
1da177e4 LT |
1760 | ZFCP_LOG_INFO( |
1761 | "ELS request size and ELS response size must be either " | |
1762 | "both 0, or both greater than 0 " | |
1763 | "(adapter: %s, req_buf_length=%d resp_buf_length=%d)\n", | |
1764 | zfcp_get_busid_by_adapter(adapter), | |
1765 | bottom->req_buf_length, | |
1766 | bottom->resp_buf_length); | |
1767 | break; | |
1768 | ||
1769 | case FSF_REQUEST_SIZE_TOO_LARGE: | |
1da177e4 LT |
1770 | ZFCP_LOG_INFO( |
1771 | "Length of the ELS request buffer, " | |
1772 | "specified in QTCB bottom, " | |
1773 | "exceeds the size of the buffers " | |
1774 | "that have been allocated for ELS request data " | |
1775 | "(adapter: %s, req_buf_length=%d)\n", | |
1776 | zfcp_get_busid_by_adapter(adapter), | |
1777 | bottom->req_buf_length); | |
1778 | break; | |
1779 | ||
1780 | case FSF_RESPONSE_SIZE_TOO_LARGE: | |
1da177e4 LT |
1781 | ZFCP_LOG_INFO( |
1782 | "Length of the ELS response buffer, " | |
1783 | "specified in QTCB bottom, " | |
1784 | "exceeds the size of the buffers " | |
1785 | "that have been allocated for ELS response data " | |
1786 | "(adapter: %s, resp_buf_length=%d)\n", | |
1787 | zfcp_get_busid_by_adapter(adapter), | |
1788 | bottom->resp_buf_length); | |
1789 | break; | |
1790 | ||
1791 | case FSF_SBAL_MISMATCH: | |
1792 | /* should never occure, avoided in zfcp_fsf_send_els */ | |
1da177e4 LT |
1793 | ZFCP_LOG_INFO("SBAL mismatch (adapter: %s, req_buf_length=%d, " |
1794 | "resp_buf_length=%d)\n", | |
1795 | zfcp_get_busid_by_adapter(adapter), | |
1796 | bottom->req_buf_length, bottom->resp_buf_length); | |
1797 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1798 | break; | |
1799 | ||
1800 | case FSF_ACCESS_DENIED: | |
1da177e4 LT |
1801 | ZFCP_LOG_NORMAL("access denied, cannot send ELS command " |
1802 | "(adapter %s, port d_id=0x%08x)\n", | |
1803 | zfcp_get_busid_by_adapter(adapter), d_id); | |
1804 | for (counter = 0; counter < 2; counter++) { | |
1805 | subtable = header->fsf_status_qual.halfword[counter * 2]; | |
1806 | rule = header->fsf_status_qual.halfword[counter * 2 + 1]; | |
1807 | switch (subtable) { | |
1808 | case FSF_SQ_CFDC_SUBTABLE_OS: | |
1809 | case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: | |
1810 | case FSF_SQ_CFDC_SUBTABLE_PORT_DID: | |
1811 | case FSF_SQ_CFDC_SUBTABLE_LUN: | |
1812 | ZFCP_LOG_INFO("Access denied (%s rule %d)\n", | |
1813 | zfcp_act_subtable_type[subtable], rule); | |
1814 | break; | |
1815 | } | |
1816 | } | |
1817 | debug_text_event(adapter->erp_dbf, 1, "fsf_s_access"); | |
1da177e4 LT |
1818 | if (port != NULL) |
1819 | zfcp_erp_port_access_denied(port); | |
1da177e4 LT |
1820 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
1821 | break; | |
1822 | ||
1823 | default: | |
1824 | ZFCP_LOG_NORMAL( | |
1825 | "bug: An unknown FSF Status was presented " | |
1826 | "(adapter: %s, fsf_status=0x%08x)\n", | |
1827 | zfcp_get_busid_by_adapter(adapter), | |
1828 | header->fsf_status); | |
1829 | debug_text_event(adapter->erp_dbf, 0, "fsf_sq_inval"); | |
1830 | debug_exception(adapter->erp_dbf, 0, | |
1831 | &header->fsf_status_qual.word[0], sizeof(u32)); | |
1832 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
1833 | break; | |
1834 | } | |
1835 | ||
1836 | skip_fsfstatus: | |
1837 | send_els->status = retval; | |
1838 | ||
1839 | if (send_els->handler != 0) | |
1840 | send_els->handler(send_els->handler_data); | |
1841 | ||
1842 | return retval; | |
1843 | } | |
1844 | ||
1845 | /* | |
1846 | * function: | |
1847 | * | |
1848 | * purpose: | |
1849 | * | |
1850 | * returns: address of initiated FSF request | |
1851 | * NULL - request could not be initiated | |
1852 | */ | |
1853 | int | |
1854 | zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) | |
1855 | { | |
1856 | volatile struct qdio_buffer_element *sbale; | |
1857 | unsigned long lock_flags; | |
1858 | int retval = 0; | |
1859 | ||
1860 | /* setup new FSF request */ | |
1861 | retval = zfcp_fsf_req_create(erp_action->adapter, | |
1862 | FSF_QTCB_EXCHANGE_CONFIG_DATA, | |
1863 | ZFCP_REQ_AUTO_CLEANUP, | |
1864 | erp_action->adapter->pool.fsf_req_erp, | |
1865 | &lock_flags, &(erp_action->fsf_req)); | |
1866 | if (retval < 0) { | |
1867 | ZFCP_LOG_INFO("error: Could not create exchange configuration " | |
1868 | "data request for adapter %s.\n", | |
1869 | zfcp_get_busid_by_adapter(erp_action->adapter)); | |
1870 | goto out; | |
1871 | } | |
1872 | ||
1873 | sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, | |
1874 | erp_action->fsf_req->sbal_curr, 0); | |
1875 | sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; | |
1876 | sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; | |
1877 | ||
1878 | erp_action->fsf_req->erp_action = erp_action; | |
1879 | erp_action->fsf_req->qtcb->bottom.config.feature_selection = | |
1880 | (FSF_FEATURE_CFDC | FSF_FEATURE_LUN_SHARING); | |
1881 | ||
1882 | /* start QDIO request for this FSF request */ | |
1883 | retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); | |
1884 | if (retval) { | |
1885 | ZFCP_LOG_INFO | |
1886 | ("error: Could not send exchange configuration data " | |
1887 | "command on the adapter %s\n", | |
1888 | zfcp_get_busid_by_adapter(erp_action->adapter)); | |
1889 | zfcp_fsf_req_free(erp_action->fsf_req); | |
1890 | erp_action->fsf_req = NULL; | |
1891 | goto out; | |
1892 | } | |
1893 | ||
1894 | ZFCP_LOG_DEBUG("exchange configuration data request initiated " | |
1895 | "(adapter %s)\n", | |
1896 | zfcp_get_busid_by_adapter(erp_action->adapter)); | |
1897 | ||
1898 | out: | |
1899 | write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, | |
1900 | lock_flags); | |
1901 | return retval; | |
1902 | } | |
1903 | ||
1904 | /** | |
1905 | * zfcp_fsf_exchange_config_evaluate | |
1906 | * @fsf_req: fsf_req which belongs to xchg config data request | |
1907 | * @xchg_ok: specifies if xchg config data was incomplete or complete (0/1) | |
1908 | * | |
1909 | * returns: -EIO on error, 0 otherwise | |
1910 | */ | |
1911 | static int | |
1912 | zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok) | |
1913 | { | |
1914 | struct fsf_qtcb_bottom_config *bottom; | |
1915 | struct zfcp_adapter *adapter = fsf_req->adapter; | |
1916 | ||
1917 | bottom = &fsf_req->qtcb->bottom.config; | |
1918 | ZFCP_LOG_DEBUG("low/high QTCB version 0x%x/0x%x of FSF\n", | |
1919 | bottom->low_qtcb_version, bottom->high_qtcb_version); | |
1920 | adapter->fsf_lic_version = bottom->lic_version; | |
1921 | adapter->supported_features = bottom->supported_features; | |
6f71d9bc JB |
1922 | adapter->peer_wwpn = 0; |
1923 | adapter->peer_wwnn = 0; | |
1924 | adapter->peer_d_id = 0; | |
1da177e4 LT |
1925 | |
1926 | if (xchg_ok) { | |
1927 | adapter->wwnn = bottom->nport_serv_param.wwnn; | |
1928 | adapter->wwpn = bottom->nport_serv_param.wwpn; | |
1929 | adapter->s_id = bottom->s_id & ZFCP_DID_MASK; | |
1930 | adapter->fc_topology = bottom->fc_topology; | |
1931 | adapter->fc_link_speed = bottom->fc_link_speed; | |
1932 | adapter->hydra_version = bottom->adapter_type; | |
1933 | } else { | |
1934 | adapter->wwnn = 0; | |
1935 | adapter->wwpn = 0; | |
1936 | adapter->s_id = 0; | |
1937 | adapter->fc_topology = 0; | |
1938 | adapter->fc_link_speed = 0; | |
1939 | adapter->hydra_version = 0; | |
1940 | } | |
1941 | ||
6f71d9bc JB |
1942 | if (adapter->fc_topology == FSF_TOPO_P2P) { |
1943 | adapter->peer_d_id = bottom->peer_d_id & ZFCP_DID_MASK; | |
1944 | adapter->peer_wwpn = bottom->plogi_payload.wwpn; | |
1945 | adapter->peer_wwnn = bottom->plogi_payload.wwnn; | |
1946 | } | |
1947 | ||
1da177e4 LT |
1948 | if(adapter->supported_features & FSF_FEATURE_HBAAPI_MANAGEMENT){ |
1949 | adapter->hardware_version = bottom->hardware_version; | |
1950 | memcpy(adapter->serial_number, bottom->serial_number, 17); | |
1951 | EBCASC(adapter->serial_number, sizeof(adapter->serial_number)); | |
1952 | } | |
1953 | ||
6f71d9bc | 1954 | ZFCP_LOG_NORMAL("The adapter %s reported the following characteristics:\n" |
1da177e4 LT |
1955 | "WWNN 0x%016Lx, " |
1956 | "WWPN 0x%016Lx, " | |
1957 | "S_ID 0x%08x,\n" | |
1958 | "adapter version 0x%x, " | |
1959 | "LIC version 0x%x, " | |
1960 | "FC link speed %d Gb/s\n", | |
1961 | zfcp_get_busid_by_adapter(adapter), | |
1962 | adapter->wwnn, | |
1963 | adapter->wwpn, | |
1964 | (unsigned int) adapter->s_id, | |
1965 | adapter->hydra_version, | |
1966 | adapter->fsf_lic_version, | |
1967 | adapter->fc_link_speed); | |
1968 | if (ZFCP_QTCB_VERSION < bottom->low_qtcb_version) { | |
1969 | ZFCP_LOG_NORMAL("error: the adapter %s " | |
1970 | "only supports newer control block " | |
1971 | "versions in comparison to this device " | |
1972 | "driver (try updated device driver)\n", | |
1973 | zfcp_get_busid_by_adapter(adapter)); | |
1974 | debug_text_event(adapter->erp_dbf, 0, "low_qtcb_ver"); | |
1975 | zfcp_erp_adapter_shutdown(adapter, 0); | |
1976 | return -EIO; | |
1977 | } | |
1978 | if (ZFCP_QTCB_VERSION > bottom->high_qtcb_version) { | |
1979 | ZFCP_LOG_NORMAL("error: the adapter %s " | |
1980 | "only supports older control block " | |
1981 | "versions than this device driver uses" | |
1982 | "(consider a microcode upgrade)\n", | |
1983 | zfcp_get_busid_by_adapter(adapter)); | |
1984 | debug_text_event(adapter->erp_dbf, 0, "high_qtcb_ver"); | |
1985 | zfcp_erp_adapter_shutdown(adapter, 0); | |
1986 | return -EIO; | |
1987 | } | |
3859f6a2 | 1988 | zfcp_set_fc_host_attrs(adapter); |
1da177e4 LT |
1989 | return 0; |
1990 | } | |
1991 | ||
1992 | /* | |
1993 | * function: zfcp_fsf_exchange_config_data_handler | |
1994 | * | |
1995 | * purpose: is called for finished Exchange Configuration Data command | |
1996 | * | |
1997 | * returns: | |
1998 | */ | |
1999 | static int | |
2000 | zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req) | |
2001 | { | |
2002 | struct fsf_qtcb_bottom_config *bottom; | |
2003 | struct zfcp_adapter *adapter = fsf_req->adapter; | |
2004 | ||
2005 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) | |
2006 | return -EIO; | |
2007 | ||
2008 | switch (fsf_req->qtcb->header.fsf_status) { | |
2009 | ||
2010 | case FSF_GOOD: | |
1da177e4 LT |
2011 | if (zfcp_fsf_exchange_config_evaluate(fsf_req, 1)) |
2012 | return -EIO; | |
2013 | ||
2014 | switch (adapter->fc_topology) { | |
2015 | case FSF_TOPO_P2P: | |
6f71d9bc JB |
2016 | ZFCP_LOG_NORMAL("Point-to-Point fibrechannel " |
2017 | "configuration detected at adapter %s\n" | |
2018 | "Peer WWNN 0x%016llx, " | |
2019 | "peer WWPN 0x%016llx, " | |
2020 | "peer d_id 0x%06x\n", | |
2021 | zfcp_get_busid_by_adapter(adapter), | |
2022 | adapter->peer_wwnn, | |
2023 | adapter->peer_wwpn, | |
2024 | adapter->peer_d_id); | |
1da177e4 LT |
2025 | debug_text_event(fsf_req->adapter->erp_dbf, 0, |
2026 | "top-p-to-p"); | |
6f71d9bc | 2027 | break; |
1da177e4 | 2028 | case FSF_TOPO_AL: |
1da177e4 LT |
2029 | ZFCP_LOG_NORMAL("error: Arbitrated loop fibrechannel " |
2030 | "topology detected at adapter %s " | |
2031 | "unsupported, shutting down adapter\n", | |
2032 | zfcp_get_busid_by_adapter(adapter)); | |
2033 | debug_text_event(fsf_req->adapter->erp_dbf, 0, | |
2034 | "top-al"); | |
2035 | zfcp_erp_adapter_shutdown(adapter, 0); | |
2036 | return -EIO; | |
2037 | case FSF_TOPO_FABRIC: | |
1da177e4 LT |
2038 | ZFCP_LOG_INFO("Switched fabric fibrechannel " |
2039 | "network detected at adapter %s.\n", | |
2040 | zfcp_get_busid_by_adapter(adapter)); | |
2041 | break; | |
2042 | default: | |
2043 | ZFCP_LOG_NORMAL("bug: The fibrechannel topology " | |
2044 | "reported by the exchange " | |
2045 | "configuration command for " | |
2046 | "the adapter %s is not " | |
2047 | "of a type known to the zfcp " | |
2048 | "driver, shutting down adapter\n", | |
2049 | zfcp_get_busid_by_adapter(adapter)); | |
6f71d9bc | 2050 | adapter->fc_topology = FSF_TOPO_ERROR; |
1da177e4 LT |
2051 | debug_text_exception(fsf_req->adapter->erp_dbf, 0, |
2052 | "unknown-topo"); | |
2053 | zfcp_erp_adapter_shutdown(adapter, 0); | |
2054 | return -EIO; | |
2055 | } | |
2056 | bottom = &fsf_req->qtcb->bottom.config; | |
2057 | if (bottom->max_qtcb_size < sizeof(struct fsf_qtcb)) { | |
2058 | ZFCP_LOG_NORMAL("bug: Maximum QTCB size (%d bytes) " | |
2059 | "allowed by the adapter %s " | |
2060 | "is lower than the minimum " | |
2061 | "required by the driver (%ld bytes).\n", | |
2062 | bottom->max_qtcb_size, | |
2063 | zfcp_get_busid_by_adapter(adapter), | |
2064 | sizeof(struct fsf_qtcb)); | |
2065 | debug_text_event(fsf_req->adapter->erp_dbf, 0, | |
2066 | "qtcb-size"); | |
2067 | debug_event(fsf_req->adapter->erp_dbf, 0, | |
2068 | &bottom->max_qtcb_size, sizeof (u32)); | |
2069 | zfcp_erp_adapter_shutdown(adapter, 0); | |
2070 | return -EIO; | |
2071 | } | |
2072 | atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK, | |
2073 | &adapter->status); | |
2074 | break; | |
2075 | case FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE: | |
2076 | debug_text_event(adapter->erp_dbf, 0, "xchg-inco"); | |
2077 | ||
2078 | if (zfcp_fsf_exchange_config_evaluate(fsf_req, 0)) | |
2079 | return -EIO; | |
2080 | ||
2081 | ZFCP_LOG_INFO("Local link to adapter %s is down\n", | |
2082 | zfcp_get_busid_by_adapter(adapter)); | |
2083 | atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK | | |
2084 | ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, | |
2085 | &adapter->status); | |
2086 | zfcp_erp_adapter_failed(adapter); | |
2087 | break; | |
2088 | default: | |
2089 | debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf-stat-ng"); | |
2090 | debug_event(fsf_req->adapter->erp_dbf, 0, | |
2091 | &fsf_req->qtcb->header.fsf_status, sizeof (u32)); | |
2092 | zfcp_erp_adapter_shutdown(adapter, 0); | |
2093 | return -EIO; | |
2094 | } | |
2095 | return 0; | |
2096 | } | |
2097 | ||
2098 | /** | |
2099 | * zfcp_fsf_exchange_port_data - request information about local port | |
2100 | * @adapter: for which port data is requested | |
2101 | * @data: response to exchange port data request | |
2102 | */ | |
2103 | int | |
2104 | zfcp_fsf_exchange_port_data(struct zfcp_adapter *adapter, | |
2105 | struct fsf_qtcb_bottom_port *data) | |
2106 | { | |
2107 | volatile struct qdio_buffer_element *sbale; | |
2108 | int retval = 0; | |
2109 | unsigned long lock_flags; | |
2110 | struct zfcp_fsf_req *fsf_req; | |
2111 | struct timer_list *timer; | |
2112 | ||
2113 | if(!(adapter->supported_features & FSF_FEATURE_HBAAPI_MANAGEMENT)){ | |
2114 | ZFCP_LOG_INFO("error: exchange port data " | |
2115 | "command not supported by adapter %s\n", | |
2116 | zfcp_get_busid_by_adapter(adapter)); | |
2117 | return -EOPNOTSUPP; | |
2118 | } | |
2119 | ||
2120 | timer = kmalloc(sizeof(struct timer_list), GFP_KERNEL); | |
2121 | if (!timer) | |
2122 | return -ENOMEM; | |
2123 | ||
2124 | /* setup new FSF request */ | |
2125 | retval = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, | |
2126 | 0, 0, &lock_flags, &fsf_req); | |
2127 | if (retval < 0) { | |
2128 | ZFCP_LOG_INFO("error: Out of resources. Could not create an " | |
2129 | "exchange port data request for" | |
2130 | "the adapter %s.\n", | |
2131 | zfcp_get_busid_by_adapter(adapter)); | |
2132 | write_unlock_irqrestore(&adapter->request_queue.queue_lock, | |
2133 | lock_flags); | |
2134 | goto out; | |
2135 | } | |
2136 | ||
059c97d0 AH |
2137 | fsf_req->data = (unsigned long) data; |
2138 | ||
1da177e4 LT |
2139 | sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); |
2140 | sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; | |
2141 | sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; | |
2142 | ||
1da177e4 LT |
2143 | init_timer(timer); |
2144 | timer->function = zfcp_fsf_request_timeout_handler; | |
2145 | timer->data = (unsigned long) adapter; | |
2146 | timer->expires = ZFCP_FSF_REQUEST_TIMEOUT; | |
2147 | ||
2148 | retval = zfcp_fsf_req_send(fsf_req, timer); | |
2149 | if (retval) { | |
2150 | ZFCP_LOG_INFO("error: Could not send an exchange port data " | |
2151 | "command on the adapter %s\n", | |
2152 | zfcp_get_busid_by_adapter(adapter)); | |
2153 | zfcp_fsf_req_free(fsf_req); | |
2154 | write_unlock_irqrestore(&adapter->request_queue.queue_lock, | |
2155 | lock_flags); | |
2156 | goto out; | |
2157 | } | |
2158 | ||
2159 | ZFCP_LOG_DEBUG("Exchange Port Data request initiated (adapter %s)\n", | |
2160 | zfcp_get_busid_by_adapter(adapter)); | |
2161 | ||
2162 | write_unlock_irqrestore(&adapter->request_queue.queue_lock, | |
2163 | lock_flags); | |
2164 | ||
2165 | wait_event(fsf_req->completion_wq, | |
2166 | fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED); | |
2167 | del_timer_sync(timer); | |
1db2c9c0 | 2168 | zfcp_fsf_req_free(fsf_req); |
1da177e4 LT |
2169 | out: |
2170 | kfree(timer); | |
2171 | return retval; | |
2172 | } | |
2173 | ||
2174 | ||
2175 | /** | |
2176 | * zfcp_fsf_exchange_port_data_handler - handler for exchange_port_data request | |
2177 | * @fsf_req: pointer to struct zfcp_fsf_req | |
2178 | */ | |
2179 | static void | |
2180 | zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *fsf_req) | |
2181 | { | |
2182 | struct fsf_qtcb_bottom_port *bottom; | |
059c97d0 AH |
2183 | struct fsf_qtcb_bottom_port *data; |
2184 | ||
2185 | data = (struct fsf_qtcb_bottom_port*) fsf_req->data; | |
1da177e4 LT |
2186 | |
2187 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) | |
2188 | return; | |
2189 | ||
2190 | switch (fsf_req->qtcb->header.fsf_status) { | |
2191 | case FSF_GOOD: | |
1da177e4 LT |
2192 | bottom = &fsf_req->qtcb->bottom.port; |
2193 | memcpy(data, bottom, sizeof(*data)); | |
2194 | break; | |
2195 | ||
2196 | default: | |
2197 | debug_text_event(fsf_req->adapter->erp_dbf, 0, "xchg-port-ng"); | |
2198 | debug_event(fsf_req->adapter->erp_dbf, 0, | |
2199 | &fsf_req->qtcb->header.fsf_status, sizeof(u32)); | |
2200 | } | |
2201 | } | |
2202 | ||
2203 | ||
2204 | /* | |
2205 | * function: zfcp_fsf_open_port | |
2206 | * | |
2207 | * purpose: | |
2208 | * | |
2209 | * returns: address of initiated FSF request | |
2210 | * NULL - request could not be initiated | |
2211 | */ | |
2212 | int | |
2213 | zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) | |
2214 | { | |
2215 | volatile struct qdio_buffer_element *sbale; | |
2216 | unsigned long lock_flags; | |
2217 | int retval = 0; | |
2218 | ||
2219 | /* setup new FSF request */ | |
2220 | retval = zfcp_fsf_req_create(erp_action->adapter, | |
2221 | FSF_QTCB_OPEN_PORT_WITH_DID, | |
2222 | ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, | |
2223 | erp_action->adapter->pool.fsf_req_erp, | |
2224 | &lock_flags, &(erp_action->fsf_req)); | |
2225 | if (retval < 0) { | |
2226 | ZFCP_LOG_INFO("error: Could not create open port request " | |
2227 | "for port 0x%016Lx on adapter %s.\n", | |
2228 | erp_action->port->wwpn, | |
2229 | zfcp_get_busid_by_adapter(erp_action->adapter)); | |
2230 | goto out; | |
2231 | } | |
2232 | ||
2233 | sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, | |
2234 | erp_action->fsf_req->sbal_curr, 0); | |
2235 | sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; | |
2236 | sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; | |
2237 | ||
2238 | erp_action->fsf_req->qtcb->bottom.support.d_id = erp_action->port->d_id; | |
2239 | atomic_set_mask(ZFCP_STATUS_COMMON_OPENING, &erp_action->port->status); | |
059c97d0 | 2240 | erp_action->fsf_req->data = (unsigned long) erp_action->port; |
1da177e4 LT |
2241 | erp_action->fsf_req->erp_action = erp_action; |
2242 | ||
2243 | /* start QDIO request for this FSF request */ | |
2244 | retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); | |
2245 | if (retval) { | |
2246 | ZFCP_LOG_INFO("error: Could not send open port request for " | |
2247 | "port 0x%016Lx on adapter %s.\n", | |
2248 | erp_action->port->wwpn, | |
2249 | zfcp_get_busid_by_adapter(erp_action->adapter)); | |
2250 | zfcp_fsf_req_free(erp_action->fsf_req); | |
2251 | erp_action->fsf_req = NULL; | |
2252 | goto out; | |
2253 | } | |
2254 | ||
2255 | ZFCP_LOG_DEBUG("open port request initiated " | |
2256 | "(adapter %s, port 0x%016Lx)\n", | |
2257 | zfcp_get_busid_by_adapter(erp_action->adapter), | |
2258 | erp_action->port->wwpn); | |
2259 | out: | |
2260 | write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, | |
2261 | lock_flags); | |
2262 | return retval; | |
2263 | } | |
2264 | ||
2265 | /* | |
2266 | * function: zfcp_fsf_open_port_handler | |
2267 | * | |
2268 | * purpose: is called for finished Open Port command | |
2269 | * | |
2270 | * returns: | |
2271 | */ | |
2272 | static int | |
2273 | zfcp_fsf_open_port_handler(struct zfcp_fsf_req *fsf_req) | |
2274 | { | |
2275 | int retval = -EINVAL; | |
2276 | struct zfcp_port *port; | |
2277 | struct fsf_plogi *plogi; | |
2278 | struct fsf_qtcb_header *header; | |
2279 | u16 subtable, rule, counter; | |
2280 | ||
059c97d0 | 2281 | port = (struct zfcp_port *) fsf_req->data; |
1da177e4 LT |
2282 | header = &fsf_req->qtcb->header; |
2283 | ||
2284 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { | |
2285 | /* don't change port status in our bookkeeping */ | |
2286 | goto skip_fsfstatus; | |
2287 | } | |
2288 | ||
2289 | /* evaluate FSF status in QTCB */ | |
2290 | switch (header->fsf_status) { | |
2291 | ||
2292 | case FSF_PORT_ALREADY_OPEN: | |
1da177e4 LT |
2293 | ZFCP_LOG_NORMAL("bug: remote port 0x%016Lx on adapter %s " |
2294 | "is already open.\n", | |
2295 | port->wwpn, zfcp_get_busid_by_port(port)); | |
2296 | debug_text_exception(fsf_req->adapter->erp_dbf, 0, | |
2297 | "fsf_s_popen"); | |
2298 | /* | |
2299 | * This is a bug, however operation should continue normally | |
2300 | * if it is simply ignored | |
2301 | */ | |
2302 | break; | |
2303 | ||
2304 | case FSF_ACCESS_DENIED: | |
1da177e4 LT |
2305 | ZFCP_LOG_NORMAL("Access denied, cannot open port 0x%016Lx " |
2306 | "on adapter %s\n", | |
2307 | port->wwpn, zfcp_get_busid_by_port(port)); | |
2308 | for (counter = 0; counter < 2; counter++) { | |
2309 | subtable = header->fsf_status_qual.halfword[counter * 2]; | |
2310 | rule = header->fsf_status_qual.halfword[counter * 2 + 1]; | |
2311 | switch (subtable) { | |
2312 | case FSF_SQ_CFDC_SUBTABLE_OS: | |
2313 | case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: | |
2314 | case FSF_SQ_CFDC_SUBTABLE_PORT_DID: | |
2315 | case FSF_SQ_CFDC_SUBTABLE_LUN: | |
2316 | ZFCP_LOG_INFO("Access denied (%s rule %d)\n", | |
2317 | zfcp_act_subtable_type[subtable], rule); | |
2318 | break; | |
2319 | } | |
2320 | } | |
2321 | debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_access"); | |
2322 | zfcp_erp_port_access_denied(port); | |
2323 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2324 | break; | |
2325 | ||
2326 | case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED: | |
1da177e4 LT |
2327 | ZFCP_LOG_INFO("error: The FSF adapter is out of resources. " |
2328 | "The remote port 0x%016Lx on adapter %s " | |
2329 | "could not be opened. Disabling it.\n", | |
2330 | port->wwpn, zfcp_get_busid_by_port(port)); | |
2331 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
2332 | "fsf_s_max_ports"); | |
2333 | zfcp_erp_port_failed(port); | |
2334 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2335 | break; | |
2336 | ||
2337 | case FSF_ADAPTER_STATUS_AVAILABLE: | |
1da177e4 LT |
2338 | switch (header->fsf_status_qual.word[0]) { |
2339 | case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: | |
1da177e4 LT |
2340 | debug_text_event(fsf_req->adapter->erp_dbf, 1, |
2341 | "fsf_sq_ltest"); | |
2342 | /* ERP strategy will escalate */ | |
2343 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2344 | break; | |
2345 | case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: | |
2346 | /* ERP strategy will escalate */ | |
2347 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
2348 | "fsf_sq_ulp"); | |
2349 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2350 | break; | |
2351 | case FSF_SQ_NO_RETRY_POSSIBLE: | |
1da177e4 LT |
2352 | ZFCP_LOG_NORMAL("The remote port 0x%016Lx on " |
2353 | "adapter %s could not be opened. " | |
2354 | "Disabling it.\n", | |
2355 | port->wwpn, | |
2356 | zfcp_get_busid_by_port(port)); | |
2357 | debug_text_exception(fsf_req->adapter->erp_dbf, 0, | |
2358 | "fsf_sq_no_retry"); | |
2359 | zfcp_erp_port_failed(port); | |
2360 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2361 | break; | |
2362 | default: | |
2363 | ZFCP_LOG_NORMAL | |
2364 | ("bug: Wrong status qualifier 0x%x arrived.\n", | |
2365 | header->fsf_status_qual.word[0]); | |
2366 | debug_text_event(fsf_req->adapter->erp_dbf, 0, | |
2367 | "fsf_sq_inval:"); | |
2368 | debug_exception( | |
2369 | fsf_req->adapter->erp_dbf, 0, | |
2370 | &header->fsf_status_qual.word[0], | |
2371 | sizeof (u32)); | |
2372 | break; | |
2373 | } | |
2374 | break; | |
2375 | ||
2376 | case FSF_GOOD: | |
1da177e4 LT |
2377 | /* save port handle assigned by FSF */ |
2378 | port->handle = header->port_handle; | |
2379 | ZFCP_LOG_INFO("The remote port 0x%016Lx via adapter %s " | |
2380 | "was opened, it's port handle is 0x%x\n", | |
2381 | port->wwpn, zfcp_get_busid_by_port(port), | |
2382 | port->handle); | |
2383 | /* mark port as open */ | |
2384 | atomic_set_mask(ZFCP_STATUS_COMMON_OPEN | | |
2385 | ZFCP_STATUS_PORT_PHYS_OPEN, &port->status); | |
d736a27b AH |
2386 | atomic_clear_mask(ZFCP_STATUS_COMMON_ACCESS_DENIED | |
2387 | ZFCP_STATUS_COMMON_ACCESS_BOXED, | |
2388 | &port->status); | |
1da177e4 LT |
2389 | retval = 0; |
2390 | /* check whether D_ID has changed during open */ | |
2391 | /* | |
2392 | * FIXME: This check is not airtight, as the FCP channel does | |
2393 | * not monitor closures of target port connections caused on | |
2394 | * the remote side. Thus, they might miss out on invalidating | |
2395 | * locally cached WWPNs (and other N_Port parameters) of gone | |
2396 | * target ports. So, our heroic attempt to make things safe | |
2397 | * could be undermined by 'open port' response data tagged with | |
2398 | * obsolete WWPNs. Another reason to monitor potential | |
2399 | * connection closures ourself at least (by interpreting | |
2400 | * incoming ELS' and unsolicited status). It just crosses my | |
2401 | * mind that one should be able to cross-check by means of | |
2402 | * another GID_PN straight after a port has been opened. | |
2403 | * Alternately, an ADISC/PDISC ELS should suffice, as well. | |
2404 | */ | |
2405 | plogi = (struct fsf_plogi *) fsf_req->qtcb->bottom.support.els; | |
2406 | if (!atomic_test_mask(ZFCP_STATUS_PORT_NO_WWPN, &port->status)) | |
2407 | { | |
2408 | if (fsf_req->qtcb->bottom.support.els1_length < | |
2409 | ((((unsigned long) &plogi->serv_param.wwpn) - | |
2410 | ((unsigned long) plogi)) + sizeof (u64))) { | |
2411 | ZFCP_LOG_INFO( | |
2412 | "warning: insufficient length of " | |
2413 | "PLOGI payload (%i)\n", | |
2414 | fsf_req->qtcb->bottom.support.els1_length); | |
2415 | debug_text_event(fsf_req->adapter->erp_dbf, 0, | |
2416 | "fsf_s_short_plogi:"); | |
2417 | /* skip sanity check and assume wwpn is ok */ | |
2418 | } else { | |
2419 | if (plogi->serv_param.wwpn != port->wwpn) { | |
2420 | ZFCP_LOG_INFO("warning: d_id of port " | |
2421 | "0x%016Lx changed during " | |
2422 | "open\n", port->wwpn); | |
2423 | debug_text_event( | |
2424 | fsf_req->adapter->erp_dbf, 0, | |
2425 | "fsf_s_did_change:"); | |
2426 | atomic_clear_mask( | |
2427 | ZFCP_STATUS_PORT_DID_DID, | |
2428 | &port->status); | |
2429 | } else | |
2430 | port->wwnn = plogi->serv_param.wwnn; | |
2431 | } | |
2432 | } | |
2433 | break; | |
2434 | ||
2435 | case FSF_UNKNOWN_OP_SUBTYPE: | |
2436 | /* should never occure, subtype not set in zfcp_fsf_open_port */ | |
1da177e4 LT |
2437 | ZFCP_LOG_INFO("unknown operation subtype (adapter: %s, " |
2438 | "op_subtype=0x%x)\n", | |
2439 | zfcp_get_busid_by_port(port), | |
2440 | fsf_req->qtcb->bottom.support.operation_subtype); | |
2441 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2442 | break; | |
2443 | ||
2444 | default: | |
2445 | ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " | |
2446 | "(debug info 0x%x)\n", | |
2447 | header->fsf_status); | |
2448 | debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:"); | |
2449 | debug_exception(fsf_req->adapter->erp_dbf, 0, | |
2450 | &header->fsf_status, sizeof (u32)); | |
2451 | break; | |
2452 | } | |
2453 | ||
2454 | skip_fsfstatus: | |
2455 | atomic_clear_mask(ZFCP_STATUS_COMMON_OPENING, &port->status); | |
2456 | return retval; | |
2457 | } | |
2458 | ||
2459 | /* | |
2460 | * function: zfcp_fsf_close_port | |
2461 | * | |
2462 | * purpose: submit FSF command "close port" | |
2463 | * | |
2464 | * returns: address of initiated FSF request | |
2465 | * NULL - request could not be initiated | |
2466 | */ | |
2467 | int | |
2468 | zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) | |
2469 | { | |
2470 | volatile struct qdio_buffer_element *sbale; | |
2471 | unsigned long lock_flags; | |
2472 | int retval = 0; | |
2473 | ||
2474 | /* setup new FSF request */ | |
2475 | retval = zfcp_fsf_req_create(erp_action->adapter, | |
2476 | FSF_QTCB_CLOSE_PORT, | |
2477 | ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, | |
2478 | erp_action->adapter->pool.fsf_req_erp, | |
2479 | &lock_flags, &(erp_action->fsf_req)); | |
2480 | if (retval < 0) { | |
2481 | ZFCP_LOG_INFO("error: Could not create a close port request " | |
2482 | "for port 0x%016Lx on adapter %s.\n", | |
2483 | erp_action->port->wwpn, | |
2484 | zfcp_get_busid_by_adapter(erp_action->adapter)); | |
2485 | goto out; | |
2486 | } | |
2487 | ||
2488 | sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, | |
2489 | erp_action->fsf_req->sbal_curr, 0); | |
2490 | sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; | |
2491 | sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; | |
2492 | ||
2493 | atomic_set_mask(ZFCP_STATUS_COMMON_CLOSING, &erp_action->port->status); | |
059c97d0 | 2494 | erp_action->fsf_req->data = (unsigned long) erp_action->port; |
1da177e4 LT |
2495 | erp_action->fsf_req->erp_action = erp_action; |
2496 | erp_action->fsf_req->qtcb->header.port_handle = | |
2497 | erp_action->port->handle; | |
2498 | ||
2499 | /* start QDIO request for this FSF request */ | |
2500 | retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); | |
2501 | if (retval) { | |
2502 | ZFCP_LOG_INFO("error: Could not send a close port request for " | |
2503 | "port 0x%016Lx on adapter %s.\n", | |
2504 | erp_action->port->wwpn, | |
2505 | zfcp_get_busid_by_adapter(erp_action->adapter)); | |
2506 | zfcp_fsf_req_free(erp_action->fsf_req); | |
2507 | erp_action->fsf_req = NULL; | |
2508 | goto out; | |
2509 | } | |
2510 | ||
2511 | ZFCP_LOG_TRACE("close port request initiated " | |
2512 | "(adapter %s, port 0x%016Lx)\n", | |
2513 | zfcp_get_busid_by_adapter(erp_action->adapter), | |
2514 | erp_action->port->wwpn); | |
2515 | out: | |
2516 | write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, | |
2517 | lock_flags); | |
2518 | return retval; | |
2519 | } | |
2520 | ||
2521 | /* | |
2522 | * function: zfcp_fsf_close_port_handler | |
2523 | * | |
2524 | * purpose: is called for finished Close Port FSF command | |
2525 | * | |
2526 | * returns: | |
2527 | */ | |
2528 | static int | |
2529 | zfcp_fsf_close_port_handler(struct zfcp_fsf_req *fsf_req) | |
2530 | { | |
2531 | int retval = -EINVAL; | |
2532 | struct zfcp_port *port; | |
2533 | ||
059c97d0 | 2534 | port = (struct zfcp_port *) fsf_req->data; |
1da177e4 LT |
2535 | |
2536 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { | |
2537 | /* don't change port status in our bookkeeping */ | |
2538 | goto skip_fsfstatus; | |
2539 | } | |
2540 | ||
2541 | /* evaluate FSF status in QTCB */ | |
2542 | switch (fsf_req->qtcb->header.fsf_status) { | |
2543 | ||
2544 | case FSF_PORT_HANDLE_NOT_VALID: | |
1da177e4 LT |
2545 | ZFCP_LOG_INFO("Temporary port identifier 0x%x for port " |
2546 | "0x%016Lx on adapter %s invalid. This may happen " | |
2547 | "occasionally.\n", port->handle, | |
2548 | port->wwpn, zfcp_get_busid_by_port(port)); | |
2549 | ZFCP_LOG_DEBUG("status qualifier:\n"); | |
2550 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
2551 | (char *) &fsf_req->qtcb->header.fsf_status_qual, | |
2552 | sizeof (union fsf_status_qual)); | |
2553 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
2554 | "fsf_s_phand_nv"); | |
2555 | zfcp_erp_adapter_reopen(port->adapter, 0); | |
2556 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2557 | break; | |
2558 | ||
2559 | case FSF_ADAPTER_STATUS_AVAILABLE: | |
1da177e4 LT |
2560 | /* Note: FSF has actually closed the port in this case. |
2561 | * The status code is just daft. Fingers crossed for a change | |
2562 | */ | |
2563 | retval = 0; | |
2564 | break; | |
2565 | ||
2566 | case FSF_GOOD: | |
1da177e4 LT |
2567 | ZFCP_LOG_TRACE("remote port 0x016%Lx on adapter %s closed, " |
2568 | "port handle 0x%x\n", port->wwpn, | |
2569 | zfcp_get_busid_by_port(port), port->handle); | |
2570 | zfcp_erp_modify_port_status(port, | |
2571 | ZFCP_STATUS_COMMON_OPEN, | |
2572 | ZFCP_CLEAR); | |
2573 | retval = 0; | |
2574 | break; | |
2575 | ||
2576 | default: | |
2577 | ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " | |
2578 | "(debug info 0x%x)\n", | |
2579 | fsf_req->qtcb->header.fsf_status); | |
2580 | debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:"); | |
2581 | debug_exception(fsf_req->adapter->erp_dbf, 0, | |
2582 | &fsf_req->qtcb->header.fsf_status, | |
2583 | sizeof (u32)); | |
2584 | break; | |
2585 | } | |
2586 | ||
2587 | skip_fsfstatus: | |
2588 | atomic_clear_mask(ZFCP_STATUS_COMMON_CLOSING, &port->status); | |
2589 | return retval; | |
2590 | } | |
2591 | ||
2592 | /* | |
2593 | * function: zfcp_fsf_close_physical_port | |
2594 | * | |
2595 | * purpose: submit FSF command "close physical port" | |
2596 | * | |
2597 | * returns: address of initiated FSF request | |
2598 | * NULL - request could not be initiated | |
2599 | */ | |
2600 | int | |
2601 | zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) | |
2602 | { | |
2603 | int retval = 0; | |
2604 | unsigned long lock_flags; | |
2605 | volatile struct qdio_buffer_element *sbale; | |
2606 | ||
2607 | /* setup new FSF request */ | |
2608 | retval = zfcp_fsf_req_create(erp_action->adapter, | |
2609 | FSF_QTCB_CLOSE_PHYSICAL_PORT, | |
2610 | ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, | |
2611 | erp_action->adapter->pool.fsf_req_erp, | |
2612 | &lock_flags, &erp_action->fsf_req); | |
2613 | if (retval < 0) { | |
2614 | ZFCP_LOG_INFO("error: Could not create close physical port " | |
2615 | "request (adapter %s, port 0x%016Lx)\n", | |
2616 | zfcp_get_busid_by_adapter(erp_action->adapter), | |
2617 | erp_action->port->wwpn); | |
2618 | ||
2619 | goto out; | |
2620 | } | |
2621 | ||
2622 | sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, | |
2623 | erp_action->fsf_req->sbal_curr, 0); | |
2624 | sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; | |
2625 | sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; | |
2626 | ||
2627 | /* mark port as being closed */ | |
2628 | atomic_set_mask(ZFCP_STATUS_PORT_PHYS_CLOSING, | |
2629 | &erp_action->port->status); | |
2630 | /* save a pointer to this port */ | |
059c97d0 | 2631 | erp_action->fsf_req->data = (unsigned long) erp_action->port; |
1da177e4 LT |
2632 | /* port to be closeed */ |
2633 | erp_action->fsf_req->qtcb->header.port_handle = | |
2634 | erp_action->port->handle; | |
2635 | erp_action->fsf_req->erp_action = erp_action; | |
2636 | ||
2637 | /* start QDIO request for this FSF request */ | |
2638 | retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); | |
2639 | if (retval) { | |
2640 | ZFCP_LOG_INFO("error: Could not send close physical port " | |
2641 | "request (adapter %s, port 0x%016Lx)\n", | |
2642 | zfcp_get_busid_by_adapter(erp_action->adapter), | |
2643 | erp_action->port->wwpn); | |
2644 | zfcp_fsf_req_free(erp_action->fsf_req); | |
2645 | erp_action->fsf_req = NULL; | |
2646 | goto out; | |
2647 | } | |
2648 | ||
2649 | ZFCP_LOG_TRACE("close physical port request initiated " | |
2650 | "(adapter %s, port 0x%016Lx)\n", | |
2651 | zfcp_get_busid_by_adapter(erp_action->adapter), | |
2652 | erp_action->port->wwpn); | |
2653 | out: | |
2654 | write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, | |
2655 | lock_flags); | |
2656 | return retval; | |
2657 | } | |
2658 | ||
2659 | /* | |
2660 | * function: zfcp_fsf_close_physical_port_handler | |
2661 | * | |
2662 | * purpose: is called for finished Close Physical Port FSF command | |
2663 | * | |
2664 | * returns: | |
2665 | */ | |
2666 | static int | |
2667 | zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *fsf_req) | |
2668 | { | |
2669 | int retval = -EINVAL; | |
2670 | struct zfcp_port *port; | |
2671 | struct zfcp_unit *unit; | |
2672 | struct fsf_qtcb_header *header; | |
2673 | u16 subtable, rule, counter; | |
2674 | ||
059c97d0 | 2675 | port = (struct zfcp_port *) fsf_req->data; |
1da177e4 LT |
2676 | header = &fsf_req->qtcb->header; |
2677 | ||
2678 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { | |
2679 | /* don't change port status in our bookkeeping */ | |
2680 | goto skip_fsfstatus; | |
2681 | } | |
2682 | ||
2683 | /* evaluate FSF status in QTCB */ | |
2684 | switch (header->fsf_status) { | |
2685 | ||
2686 | case FSF_PORT_HANDLE_NOT_VALID: | |
1da177e4 LT |
2687 | ZFCP_LOG_INFO("Temporary port identifier 0x%x invalid" |
2688 | "(adapter %s, port 0x%016Lx). " | |
2689 | "This may happen occasionally.\n", | |
2690 | port->handle, | |
2691 | zfcp_get_busid_by_port(port), | |
2692 | port->wwpn); | |
2693 | ZFCP_LOG_DEBUG("status qualifier:\n"); | |
2694 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
2695 | (char *) &header->fsf_status_qual, | |
2696 | sizeof (union fsf_status_qual)); | |
2697 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
2698 | "fsf_s_phand_nv"); | |
2699 | zfcp_erp_adapter_reopen(port->adapter, 0); | |
2700 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2701 | break; | |
2702 | ||
2703 | case FSF_ACCESS_DENIED: | |
1da177e4 LT |
2704 | ZFCP_LOG_NORMAL("Access denied, cannot close " |
2705 | "physical port 0x%016Lx on adapter %s\n", | |
2706 | port->wwpn, zfcp_get_busid_by_port(port)); | |
2707 | for (counter = 0; counter < 2; counter++) { | |
2708 | subtable = header->fsf_status_qual.halfword[counter * 2]; | |
2709 | rule = header->fsf_status_qual.halfword[counter * 2 + 1]; | |
2710 | switch (subtable) { | |
2711 | case FSF_SQ_CFDC_SUBTABLE_OS: | |
2712 | case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: | |
2713 | case FSF_SQ_CFDC_SUBTABLE_PORT_DID: | |
2714 | case FSF_SQ_CFDC_SUBTABLE_LUN: | |
2715 | ZFCP_LOG_INFO("Access denied (%s rule %d)\n", | |
2716 | zfcp_act_subtable_type[subtable], rule); | |
2717 | break; | |
2718 | } | |
2719 | } | |
2720 | debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_access"); | |
2721 | zfcp_erp_port_access_denied(port); | |
2722 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2723 | break; | |
2724 | ||
2725 | case FSF_PORT_BOXED: | |
1da177e4 LT |
2726 | ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter " |
2727 | "%s needs to be reopened but it was attempted " | |
2728 | "to close it physically.\n", | |
2729 | port->wwpn, | |
2730 | zfcp_get_busid_by_port(port)); | |
2731 | debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_pboxed"); | |
d736a27b | 2732 | zfcp_erp_port_boxed(port); |
1da177e4 LT |
2733 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR | |
2734 | ZFCP_STATUS_FSFREQ_RETRY; | |
2735 | break; | |
2736 | ||
2737 | case FSF_ADAPTER_STATUS_AVAILABLE: | |
1da177e4 LT |
2738 | switch (header->fsf_status_qual.word[0]) { |
2739 | case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: | |
1da177e4 LT |
2740 | debug_text_event(fsf_req->adapter->erp_dbf, 1, |
2741 | "fsf_sq_ltest"); | |
2742 | /* This will now be escalated by ERP */ | |
2743 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2744 | break; | |
2745 | case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: | |
1da177e4 LT |
2746 | /* ERP strategy will escalate */ |
2747 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
2748 | "fsf_sq_ulp"); | |
2749 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2750 | break; | |
2751 | default: | |
2752 | ZFCP_LOG_NORMAL | |
2753 | ("bug: Wrong status qualifier 0x%x arrived.\n", | |
2754 | header->fsf_status_qual.word[0]); | |
2755 | debug_text_event(fsf_req->adapter->erp_dbf, 0, | |
2756 | "fsf_sq_inval:"); | |
2757 | debug_exception( | |
2758 | fsf_req->adapter->erp_dbf, 0, | |
2759 | &header->fsf_status_qual.word[0], sizeof (u32)); | |
2760 | break; | |
2761 | } | |
2762 | break; | |
2763 | ||
2764 | case FSF_GOOD: | |
1da177e4 LT |
2765 | ZFCP_LOG_DEBUG("Remote port 0x%016Lx via adapter %s " |
2766 | "physically closed, port handle 0x%x\n", | |
2767 | port->wwpn, | |
2768 | zfcp_get_busid_by_port(port), port->handle); | |
2769 | /* can't use generic zfcp_erp_modify_port_status because | |
2770 | * ZFCP_STATUS_COMMON_OPEN must not be reset for the port | |
2771 | */ | |
2772 | atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_OPEN, &port->status); | |
2773 | list_for_each_entry(unit, &port->unit_list_head, list) | |
2774 | atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN, &unit->status); | |
2775 | retval = 0; | |
2776 | break; | |
2777 | ||
2778 | default: | |
2779 | ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " | |
2780 | "(debug info 0x%x)\n", | |
2781 | header->fsf_status); | |
2782 | debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:"); | |
2783 | debug_exception(fsf_req->adapter->erp_dbf, 0, | |
2784 | &header->fsf_status, sizeof (u32)); | |
2785 | break; | |
2786 | } | |
2787 | ||
2788 | skip_fsfstatus: | |
2789 | atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_CLOSING, &port->status); | |
2790 | return retval; | |
2791 | } | |
2792 | ||
2793 | /* | |
2794 | * function: zfcp_fsf_open_unit | |
2795 | * | |
2796 | * purpose: | |
2797 | * | |
2798 | * returns: | |
2799 | * | |
2800 | * assumptions: This routine does not check whether the associated | |
2801 | * remote port has already been opened. This should be | |
2802 | * done by calling routines. Otherwise some status | |
2803 | * may be presented by FSF | |
2804 | */ | |
2805 | int | |
2806 | zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) | |
2807 | { | |
2808 | volatile struct qdio_buffer_element *sbale; | |
2809 | unsigned long lock_flags; | |
2810 | int retval = 0; | |
2811 | ||
2812 | /* setup new FSF request */ | |
2813 | retval = zfcp_fsf_req_create(erp_action->adapter, | |
2814 | FSF_QTCB_OPEN_LUN, | |
2815 | ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, | |
2816 | erp_action->adapter->pool.fsf_req_erp, | |
2817 | &lock_flags, &(erp_action->fsf_req)); | |
2818 | if (retval < 0) { | |
2819 | ZFCP_LOG_INFO("error: Could not create open unit request for " | |
2820 | "unit 0x%016Lx on port 0x%016Lx on adapter %s.\n", | |
2821 | erp_action->unit->fcp_lun, | |
2822 | erp_action->unit->port->wwpn, | |
2823 | zfcp_get_busid_by_adapter(erp_action->adapter)); | |
2824 | goto out; | |
2825 | } | |
2826 | ||
2827 | sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, | |
2828 | erp_action->fsf_req->sbal_curr, 0); | |
2829 | sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; | |
2830 | sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; | |
2831 | ||
2832 | erp_action->fsf_req->qtcb->header.port_handle = | |
2833 | erp_action->port->handle; | |
2834 | erp_action->fsf_req->qtcb->bottom.support.fcp_lun = | |
2835 | erp_action->unit->fcp_lun; | |
2836 | erp_action->fsf_req->qtcb->bottom.support.option = | |
2837 | FSF_OPEN_LUN_SUPPRESS_BOXING; | |
2838 | atomic_set_mask(ZFCP_STATUS_COMMON_OPENING, &erp_action->unit->status); | |
059c97d0 | 2839 | erp_action->fsf_req->data = (unsigned long) erp_action->unit; |
1da177e4 LT |
2840 | erp_action->fsf_req->erp_action = erp_action; |
2841 | ||
2842 | /* start QDIO request for this FSF request */ | |
2843 | retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); | |
2844 | if (retval) { | |
2845 | ZFCP_LOG_INFO("error: Could not send an open unit request " | |
2846 | "on the adapter %s, port 0x%016Lx for " | |
2847 | "unit 0x%016Lx\n", | |
2848 | zfcp_get_busid_by_adapter(erp_action->adapter), | |
2849 | erp_action->port->wwpn, | |
2850 | erp_action->unit->fcp_lun); | |
2851 | zfcp_fsf_req_free(erp_action->fsf_req); | |
2852 | erp_action->fsf_req = NULL; | |
2853 | goto out; | |
2854 | } | |
2855 | ||
2856 | ZFCP_LOG_TRACE("Open LUN request initiated (adapter %s, " | |
2857 | "port 0x%016Lx, unit 0x%016Lx)\n", | |
2858 | zfcp_get_busid_by_adapter(erp_action->adapter), | |
2859 | erp_action->port->wwpn, erp_action->unit->fcp_lun); | |
2860 | out: | |
2861 | write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, | |
2862 | lock_flags); | |
2863 | return retval; | |
2864 | } | |
2865 | ||
2866 | /* | |
2867 | * function: zfcp_fsf_open_unit_handler | |
2868 | * | |
2869 | * purpose: is called for finished Open LUN command | |
2870 | * | |
2871 | * returns: | |
2872 | */ | |
2873 | static int | |
2874 | zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *fsf_req) | |
2875 | { | |
2876 | int retval = -EINVAL; | |
2877 | struct zfcp_adapter *adapter; | |
2878 | struct zfcp_unit *unit; | |
2879 | struct fsf_qtcb_header *header; | |
2880 | struct fsf_qtcb_bottom_support *bottom; | |
2881 | struct fsf_queue_designator *queue_designator; | |
2882 | u16 subtable, rule, counter; | |
2883 | u32 allowed, exclusive, readwrite; | |
2884 | ||
059c97d0 | 2885 | unit = (struct zfcp_unit *) fsf_req->data; |
1da177e4 LT |
2886 | |
2887 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { | |
2888 | /* don't change unit status in our bookkeeping */ | |
2889 | goto skip_fsfstatus; | |
2890 | } | |
2891 | ||
2892 | adapter = fsf_req->adapter; | |
2893 | header = &fsf_req->qtcb->header; | |
2894 | bottom = &fsf_req->qtcb->bottom.support; | |
2895 | queue_designator = &header->fsf_status_qual.fsf_queue_designator; | |
2896 | ||
2897 | allowed = bottom->lun_access_info & FSF_UNIT_ACCESS_OPEN_LUN_ALLOWED; | |
2898 | exclusive = bottom->lun_access_info & FSF_UNIT_ACCESS_EXCLUSIVE; | |
2899 | readwrite = bottom->lun_access_info & FSF_UNIT_ACCESS_OUTBOUND_TRANSFER; | |
2900 | ||
2901 | atomic_clear_mask(ZFCP_STATUS_COMMON_ACCESS_DENIED | | |
2902 | ZFCP_STATUS_UNIT_SHARED | | |
2903 | ZFCP_STATUS_UNIT_READONLY, | |
2904 | &unit->status); | |
2905 | ||
2906 | /* evaluate FSF status in QTCB */ | |
2907 | switch (header->fsf_status) { | |
2908 | ||
2909 | case FSF_PORT_HANDLE_NOT_VALID: | |
1da177e4 LT |
2910 | ZFCP_LOG_INFO("Temporary port identifier 0x%x " |
2911 | "for port 0x%016Lx on adapter %s invalid " | |
2912 | "This may happen occasionally\n", | |
2913 | unit->port->handle, | |
2914 | unit->port->wwpn, zfcp_get_busid_by_unit(unit)); | |
2915 | ZFCP_LOG_DEBUG("status qualifier:\n"); | |
2916 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
2917 | (char *) &header->fsf_status_qual, | |
2918 | sizeof (union fsf_status_qual)); | |
2919 | debug_text_event(adapter->erp_dbf, 1, "fsf_s_ph_nv"); | |
2920 | zfcp_erp_adapter_reopen(unit->port->adapter, 0); | |
2921 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2922 | break; | |
2923 | ||
2924 | case FSF_LUN_ALREADY_OPEN: | |
1da177e4 LT |
2925 | ZFCP_LOG_NORMAL("bug: Attempted to open unit 0x%016Lx on " |
2926 | "remote port 0x%016Lx on adapter %s twice.\n", | |
2927 | unit->fcp_lun, | |
2928 | unit->port->wwpn, zfcp_get_busid_by_unit(unit)); | |
2929 | debug_text_exception(adapter->erp_dbf, 0, | |
2930 | "fsf_s_uopen"); | |
2931 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2932 | break; | |
2933 | ||
2934 | case FSF_ACCESS_DENIED: | |
1da177e4 LT |
2935 | ZFCP_LOG_NORMAL("Access denied, cannot open unit 0x%016Lx on " |
2936 | "remote port 0x%016Lx on adapter %s\n", | |
2937 | unit->fcp_lun, unit->port->wwpn, | |
2938 | zfcp_get_busid_by_unit(unit)); | |
2939 | for (counter = 0; counter < 2; counter++) { | |
2940 | subtable = header->fsf_status_qual.halfword[counter * 2]; | |
2941 | rule = header->fsf_status_qual.halfword[counter * 2 + 1]; | |
2942 | switch (subtable) { | |
2943 | case FSF_SQ_CFDC_SUBTABLE_OS: | |
2944 | case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: | |
2945 | case FSF_SQ_CFDC_SUBTABLE_PORT_DID: | |
2946 | case FSF_SQ_CFDC_SUBTABLE_LUN: | |
2947 | ZFCP_LOG_INFO("Access denied (%s rule %d)\n", | |
2948 | zfcp_act_subtable_type[subtable], rule); | |
2949 | break; | |
2950 | } | |
2951 | } | |
2952 | debug_text_event(adapter->erp_dbf, 1, "fsf_s_access"); | |
2953 | zfcp_erp_unit_access_denied(unit); | |
2954 | atomic_clear_mask(ZFCP_STATUS_UNIT_SHARED, &unit->status); | |
2955 | atomic_clear_mask(ZFCP_STATUS_UNIT_READONLY, &unit->status); | |
2956 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
2957 | break; | |
2958 | ||
2959 | case FSF_PORT_BOXED: | |
1da177e4 LT |
2960 | ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s " |
2961 | "needs to be reopened\n", | |
2962 | unit->port->wwpn, zfcp_get_busid_by_unit(unit)); | |
2963 | debug_text_event(adapter->erp_dbf, 2, "fsf_s_pboxed"); | |
d736a27b | 2964 | zfcp_erp_port_boxed(unit->port); |
1da177e4 LT |
2965 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR | |
2966 | ZFCP_STATUS_FSFREQ_RETRY; | |
2967 | break; | |
2968 | ||
2969 | case FSF_LUN_SHARING_VIOLATION: | |
1da177e4 LT |
2970 | if (header->fsf_status_qual.word[0] != 0) { |
2971 | ZFCP_LOG_NORMAL("FCP-LUN 0x%Lx at the remote port " | |
2972 | "with WWPN 0x%Lx " | |
2973 | "connected to the adapter %s " | |
2974 | "is already in use in LPAR%d, CSS%d\n", | |
2975 | unit->fcp_lun, | |
2976 | unit->port->wwpn, | |
2977 | zfcp_get_busid_by_unit(unit), | |
2978 | queue_designator->hla, | |
2979 | queue_designator->cssid); | |
2980 | } else { | |
2981 | subtable = header->fsf_status_qual.halfword[4]; | |
2982 | rule = header->fsf_status_qual.halfword[5]; | |
2983 | switch (subtable) { | |
2984 | case FSF_SQ_CFDC_SUBTABLE_OS: | |
2985 | case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: | |
2986 | case FSF_SQ_CFDC_SUBTABLE_PORT_DID: | |
2987 | case FSF_SQ_CFDC_SUBTABLE_LUN: | |
2988 | ZFCP_LOG_NORMAL("Access to FCP-LUN 0x%Lx at the " | |
2989 | "remote port with WWPN 0x%Lx " | |
2990 | "connected to the adapter %s " | |
2991 | "is denied (%s rule %d)\n", | |
2992 | unit->fcp_lun, | |
2993 | unit->port->wwpn, | |
2994 | zfcp_get_busid_by_unit(unit), | |
2995 | zfcp_act_subtable_type[subtable], | |
2996 | rule); | |
2997 | break; | |
2998 | } | |
2999 | } | |
3000 | ZFCP_LOG_DEBUG("status qualifier:\n"); | |
3001 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3002 | (char *) &header->fsf_status_qual, | |
3003 | sizeof (union fsf_status_qual)); | |
3004 | debug_text_event(adapter->erp_dbf, 2, | |
3005 | "fsf_s_l_sh_vio"); | |
3006 | zfcp_erp_unit_access_denied(unit); | |
3007 | atomic_clear_mask(ZFCP_STATUS_UNIT_SHARED, &unit->status); | |
3008 | atomic_clear_mask(ZFCP_STATUS_UNIT_READONLY, &unit->status); | |
3009 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
3010 | break; | |
3011 | ||
3012 | case FSF_MAXIMUM_NUMBER_OF_LUNS_EXCEEDED: | |
1da177e4 LT |
3013 | ZFCP_LOG_INFO("error: The adapter ran out of resources. " |
3014 | "There is no handle (temporary port identifier) " | |
3015 | "available for unit 0x%016Lx on port 0x%016Lx " | |
3016 | "on adapter %s\n", | |
3017 | unit->fcp_lun, | |
3018 | unit->port->wwpn, | |
3019 | zfcp_get_busid_by_unit(unit)); | |
3020 | debug_text_event(adapter->erp_dbf, 1, | |
3021 | "fsf_s_max_units"); | |
3022 | zfcp_erp_unit_failed(unit); | |
3023 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
3024 | break; | |
3025 | ||
3026 | case FSF_ADAPTER_STATUS_AVAILABLE: | |
1da177e4 LT |
3027 | switch (header->fsf_status_qual.word[0]) { |
3028 | case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: | |
1da177e4 LT |
3029 | /* Re-establish link to port */ |
3030 | debug_text_event(adapter->erp_dbf, 1, | |
3031 | "fsf_sq_ltest"); | |
65a8d4e1 | 3032 | zfcp_test_link(unit->port); |
1da177e4 LT |
3033 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
3034 | break; | |
3035 | case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: | |
1da177e4 LT |
3036 | /* ERP strategy will escalate */ |
3037 | debug_text_event(adapter->erp_dbf, 1, | |
3038 | "fsf_sq_ulp"); | |
3039 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
3040 | break; | |
3041 | default: | |
3042 | ZFCP_LOG_NORMAL | |
3043 | ("bug: Wrong status qualifier 0x%x arrived.\n", | |
3044 | header->fsf_status_qual.word[0]); | |
3045 | debug_text_event(adapter->erp_dbf, 0, | |
3046 | "fsf_sq_inval:"); | |
3047 | debug_exception(adapter->erp_dbf, 0, | |
3048 | &header->fsf_status_qual.word[0], | |
3049 | sizeof (u32)); | |
3050 | } | |
3051 | break; | |
3052 | ||
3053 | case FSF_INVALID_COMMAND_OPTION: | |
1da177e4 LT |
3054 | ZFCP_LOG_NORMAL( |
3055 | "Invalid option 0x%x has been specified " | |
3056 | "in QTCB bottom sent to the adapter %s\n", | |
3057 | bottom->option, | |
3058 | zfcp_get_busid_by_adapter(adapter)); | |
3059 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
3060 | retval = -EINVAL; | |
3061 | break; | |
3062 | ||
3063 | case FSF_GOOD: | |
1da177e4 LT |
3064 | /* save LUN handle assigned by FSF */ |
3065 | unit->handle = header->lun_handle; | |
3066 | ZFCP_LOG_TRACE("unit 0x%016Lx on remote port 0x%016Lx on " | |
3067 | "adapter %s opened, port handle 0x%x\n", | |
3068 | unit->fcp_lun, | |
3069 | unit->port->wwpn, | |
3070 | zfcp_get_busid_by_unit(unit), | |
3071 | unit->handle); | |
3072 | /* mark unit as open */ | |
3073 | atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &unit->status); | |
d736a27b AH |
3074 | atomic_clear_mask(ZFCP_STATUS_COMMON_ACCESS_DENIED | |
3075 | ZFCP_STATUS_COMMON_ACCESS_BOXED, | |
3076 | &unit->status); | |
1da177e4 LT |
3077 | if (adapter->supported_features & FSF_FEATURE_LUN_SHARING){ |
3078 | if (!exclusive) | |
3079 | atomic_set_mask(ZFCP_STATUS_UNIT_SHARED, | |
3080 | &unit->status); | |
3081 | ||
3082 | if (!readwrite) { | |
3083 | atomic_set_mask(ZFCP_STATUS_UNIT_READONLY, | |
3084 | &unit->status); | |
3085 | ZFCP_LOG_NORMAL("read-only access for unit " | |
3086 | "(adapter %s, wwpn=0x%016Lx, " | |
3087 | "fcp_lun=0x%016Lx)\n", | |
3088 | zfcp_get_busid_by_unit(unit), | |
3089 | unit->port->wwpn, | |
3090 | unit->fcp_lun); | |
3091 | } | |
3092 | ||
3093 | if (exclusive && !readwrite) { | |
3094 | ZFCP_LOG_NORMAL("exclusive access of read-only " | |
3095 | "unit not supported\n"); | |
3096 | zfcp_erp_unit_failed(unit); | |
3097 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
3098 | zfcp_erp_unit_shutdown(unit, 0); | |
3099 | } else if (!exclusive && readwrite) { | |
3100 | ZFCP_LOG_NORMAL("shared access of read-write " | |
3101 | "unit not supported\n"); | |
3102 | zfcp_erp_unit_failed(unit); | |
3103 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
3104 | zfcp_erp_unit_shutdown(unit, 0); | |
3105 | } | |
3106 | } | |
3107 | ||
3108 | retval = 0; | |
3109 | break; | |
3110 | ||
3111 | default: | |
3112 | ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " | |
3113 | "(debug info 0x%x)\n", | |
3114 | header->fsf_status); | |
3115 | debug_text_event(adapter->erp_dbf, 0, "fsf_s_inval:"); | |
3116 | debug_exception(adapter->erp_dbf, 0, | |
3117 | &header->fsf_status, sizeof (u32)); | |
3118 | break; | |
3119 | } | |
3120 | ||
3121 | skip_fsfstatus: | |
3122 | atomic_clear_mask(ZFCP_STATUS_COMMON_OPENING, &unit->status); | |
3123 | return retval; | |
3124 | } | |
3125 | ||
3126 | /* | |
3127 | * function: zfcp_fsf_close_unit | |
3128 | * | |
3129 | * purpose: | |
3130 | * | |
3131 | * returns: address of fsf_req - request successfully initiated | |
3132 | * NULL - | |
3133 | * | |
3134 | * assumptions: This routine does not check whether the associated | |
3135 | * remote port/lun has already been opened. This should be | |
3136 | * done by calling routines. Otherwise some status | |
3137 | * may be presented by FSF | |
3138 | */ | |
3139 | int | |
3140 | zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) | |
3141 | { | |
3142 | volatile struct qdio_buffer_element *sbale; | |
3143 | unsigned long lock_flags; | |
3144 | int retval = 0; | |
3145 | ||
3146 | /* setup new FSF request */ | |
3147 | retval = zfcp_fsf_req_create(erp_action->adapter, | |
3148 | FSF_QTCB_CLOSE_LUN, | |
3149 | ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, | |
3150 | erp_action->adapter->pool.fsf_req_erp, | |
3151 | &lock_flags, &(erp_action->fsf_req)); | |
3152 | if (retval < 0) { | |
3153 | ZFCP_LOG_INFO("error: Could not create close unit request for " | |
3154 | "unit 0x%016Lx on port 0x%016Lx on adapter %s.\n", | |
3155 | erp_action->unit->fcp_lun, | |
3156 | erp_action->port->wwpn, | |
3157 | zfcp_get_busid_by_adapter(erp_action->adapter)); | |
3158 | goto out; | |
3159 | } | |
3160 | ||
3161 | sbale = zfcp_qdio_sbale_req(erp_action->fsf_req, | |
3162 | erp_action->fsf_req->sbal_curr, 0); | |
3163 | sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; | |
3164 | sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; | |
3165 | ||
3166 | erp_action->fsf_req->qtcb->header.port_handle = | |
3167 | erp_action->port->handle; | |
3168 | erp_action->fsf_req->qtcb->header.lun_handle = erp_action->unit->handle; | |
3169 | atomic_set_mask(ZFCP_STATUS_COMMON_CLOSING, &erp_action->unit->status); | |
059c97d0 | 3170 | erp_action->fsf_req->data = (unsigned long) erp_action->unit; |
1da177e4 LT |
3171 | erp_action->fsf_req->erp_action = erp_action; |
3172 | ||
3173 | /* start QDIO request for this FSF request */ | |
3174 | retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); | |
3175 | if (retval) { | |
3176 | ZFCP_LOG_INFO("error: Could not send a close unit request for " | |
3177 | "unit 0x%016Lx on port 0x%016Lx onadapter %s.\n", | |
3178 | erp_action->unit->fcp_lun, | |
3179 | erp_action->port->wwpn, | |
3180 | zfcp_get_busid_by_adapter(erp_action->adapter)); | |
3181 | zfcp_fsf_req_free(erp_action->fsf_req); | |
3182 | erp_action->fsf_req = NULL; | |
3183 | goto out; | |
3184 | } | |
3185 | ||
3186 | ZFCP_LOG_TRACE("Close LUN request initiated (adapter %s, " | |
3187 | "port 0x%016Lx, unit 0x%016Lx)\n", | |
3188 | zfcp_get_busid_by_adapter(erp_action->adapter), | |
3189 | erp_action->port->wwpn, erp_action->unit->fcp_lun); | |
3190 | out: | |
3191 | write_unlock_irqrestore(&erp_action->adapter->request_queue.queue_lock, | |
3192 | lock_flags); | |
3193 | return retval; | |
3194 | } | |
3195 | ||
3196 | /* | |
3197 | * function: zfcp_fsf_close_unit_handler | |
3198 | * | |
3199 | * purpose: is called for finished Close LUN FSF command | |
3200 | * | |
3201 | * returns: | |
3202 | */ | |
3203 | static int | |
3204 | zfcp_fsf_close_unit_handler(struct zfcp_fsf_req *fsf_req) | |
3205 | { | |
3206 | int retval = -EINVAL; | |
3207 | struct zfcp_unit *unit; | |
3208 | ||
059c97d0 | 3209 | unit = (struct zfcp_unit *) fsf_req->data; |
1da177e4 LT |
3210 | |
3211 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { | |
3212 | /* don't change unit status in our bookkeeping */ | |
3213 | goto skip_fsfstatus; | |
3214 | } | |
3215 | ||
3216 | /* evaluate FSF status in QTCB */ | |
3217 | switch (fsf_req->qtcb->header.fsf_status) { | |
3218 | ||
3219 | case FSF_PORT_HANDLE_NOT_VALID: | |
1da177e4 LT |
3220 | ZFCP_LOG_INFO("Temporary port identifier 0x%x for port " |
3221 | "0x%016Lx on adapter %s invalid. This may " | |
3222 | "happen in rare circumstances\n", | |
3223 | unit->port->handle, | |
3224 | unit->port->wwpn, | |
3225 | zfcp_get_busid_by_unit(unit)); | |
3226 | ZFCP_LOG_DEBUG("status qualifier:\n"); | |
3227 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3228 | (char *) &fsf_req->qtcb->header.fsf_status_qual, | |
3229 | sizeof (union fsf_status_qual)); | |
3230 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
3231 | "fsf_s_phand_nv"); | |
3232 | zfcp_erp_adapter_reopen(unit->port->adapter, 0); | |
1da177e4 LT |
3233 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
3234 | break; | |
3235 | ||
3236 | case FSF_LUN_HANDLE_NOT_VALID: | |
1da177e4 LT |
3237 | ZFCP_LOG_INFO("Temporary LUN identifier 0x%x of unit " |
3238 | "0x%016Lx on port 0x%016Lx on adapter %s is " | |
3239 | "invalid. This may happen occasionally.\n", | |
3240 | unit->handle, | |
3241 | unit->fcp_lun, | |
3242 | unit->port->wwpn, | |
3243 | zfcp_get_busid_by_unit(unit)); | |
3244 | ZFCP_LOG_DEBUG("Status qualifier data:\n"); | |
3245 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3246 | (char *) &fsf_req->qtcb->header.fsf_status_qual, | |
3247 | sizeof (union fsf_status_qual)); | |
3248 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
3249 | "fsf_s_lhand_nv"); | |
3250 | zfcp_erp_port_reopen(unit->port, 0); | |
1da177e4 LT |
3251 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
3252 | break; | |
3253 | ||
3254 | case FSF_PORT_BOXED: | |
1da177e4 LT |
3255 | ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s " |
3256 | "needs to be reopened\n", | |
3257 | unit->port->wwpn, | |
3258 | zfcp_get_busid_by_unit(unit)); | |
3259 | debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_s_pboxed"); | |
d736a27b | 3260 | zfcp_erp_port_boxed(unit->port); |
1da177e4 LT |
3261 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR | |
3262 | ZFCP_STATUS_FSFREQ_RETRY; | |
3263 | break; | |
3264 | ||
3265 | case FSF_ADAPTER_STATUS_AVAILABLE: | |
1da177e4 LT |
3266 | switch (fsf_req->qtcb->header.fsf_status_qual.word[0]) { |
3267 | case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: | |
1da177e4 LT |
3268 | /* re-establish link to port */ |
3269 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
3270 | "fsf_sq_ltest"); | |
65a8d4e1 | 3271 | zfcp_test_link(unit->port); |
1da177e4 LT |
3272 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
3273 | break; | |
3274 | case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: | |
1da177e4 LT |
3275 | /* ERP strategy will escalate */ |
3276 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
3277 | "fsf_sq_ulp"); | |
3278 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
3279 | break; | |
3280 | default: | |
3281 | ZFCP_LOG_NORMAL | |
3282 | ("bug: Wrong status qualifier 0x%x arrived.\n", | |
3283 | fsf_req->qtcb->header.fsf_status_qual.word[0]); | |
3284 | debug_text_event(fsf_req->adapter->erp_dbf, 0, | |
3285 | "fsf_sq_inval:"); | |
3286 | debug_exception( | |
3287 | fsf_req->adapter->erp_dbf, 0, | |
3288 | &fsf_req->qtcb->header.fsf_status_qual.word[0], | |
3289 | sizeof (u32)); | |
3290 | break; | |
3291 | } | |
3292 | break; | |
3293 | ||
3294 | case FSF_GOOD: | |
1da177e4 LT |
3295 | ZFCP_LOG_TRACE("unit 0x%016Lx on port 0x%016Lx on adapter %s " |
3296 | "closed, port handle 0x%x\n", | |
3297 | unit->fcp_lun, | |
3298 | unit->port->wwpn, | |
3299 | zfcp_get_busid_by_unit(unit), | |
3300 | unit->handle); | |
3301 | /* mark unit as closed */ | |
3302 | atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN, &unit->status); | |
3303 | retval = 0; | |
3304 | break; | |
3305 | ||
3306 | default: | |
3307 | ZFCP_LOG_NORMAL("bug: An unknown FSF Status was presented " | |
3308 | "(debug info 0x%x)\n", | |
3309 | fsf_req->qtcb->header.fsf_status); | |
3310 | debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:"); | |
3311 | debug_exception(fsf_req->adapter->erp_dbf, 0, | |
3312 | &fsf_req->qtcb->header.fsf_status, | |
3313 | sizeof (u32)); | |
3314 | break; | |
3315 | } | |
3316 | ||
3317 | skip_fsfstatus: | |
3318 | atomic_clear_mask(ZFCP_STATUS_COMMON_CLOSING, &unit->status); | |
3319 | return retval; | |
3320 | } | |
3321 | ||
3322 | /** | |
3323 | * zfcp_fsf_send_fcp_command_task - initiate an FCP command (for a SCSI command) | |
3324 | * @adapter: adapter where scsi command is issued | |
3325 | * @unit: unit where command is sent to | |
3326 | * @scsi_cmnd: scsi command to be sent | |
3327 | * @timer: timer to be started when request is initiated | |
3328 | * @req_flags: flags for fsf_request | |
3329 | */ | |
3330 | int | |
3331 | zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter, | |
3332 | struct zfcp_unit *unit, | |
3333 | struct scsi_cmnd * scsi_cmnd, | |
3334 | struct timer_list *timer, int req_flags) | |
3335 | { | |
3336 | struct zfcp_fsf_req *fsf_req = NULL; | |
3337 | struct fcp_cmnd_iu *fcp_cmnd_iu; | |
3338 | unsigned int sbtype; | |
3339 | unsigned long lock_flags; | |
3340 | int real_bytes = 0; | |
3341 | int retval = 0; | |
3342 | int mask; | |
3343 | ||
3344 | /* setup new FSF request */ | |
3345 | retval = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, | |
3346 | adapter->pool.fsf_req_scsi, | |
3347 | &lock_flags, &fsf_req); | |
3348 | if (unlikely(retval < 0)) { | |
3349 | ZFCP_LOG_DEBUG("error: Could not create FCP command request " | |
3350 | "for unit 0x%016Lx on port 0x%016Lx on " | |
3351 | "adapter %s\n", | |
3352 | unit->fcp_lun, | |
3353 | unit->port->wwpn, | |
3354 | zfcp_get_busid_by_adapter(adapter)); | |
3355 | goto failed_req_create; | |
3356 | } | |
3357 | ||
059c97d0 AH |
3358 | zfcp_unit_get(unit); |
3359 | fsf_req->unit = unit; | |
1da177e4 | 3360 | |
059c97d0 AH |
3361 | /* associate FSF request with SCSI request (for look up on abort) */ |
3362 | scsi_cmnd->host_scribble = (char *) fsf_req; | |
3363 | ||
3364 | /* associate SCSI command with FSF request */ | |
3365 | fsf_req->data = (unsigned long) scsi_cmnd; | |
1da177e4 LT |
3366 | |
3367 | /* set handles of unit and its parent port in QTCB */ | |
3368 | fsf_req->qtcb->header.lun_handle = unit->handle; | |
3369 | fsf_req->qtcb->header.port_handle = unit->port->handle; | |
3370 | ||
3371 | /* FSF does not define the structure of the FCP_CMND IU */ | |
3372 | fcp_cmnd_iu = (struct fcp_cmnd_iu *) | |
3373 | &(fsf_req->qtcb->bottom.io.fcp_cmnd); | |
3374 | ||
3375 | /* | |
3376 | * set depending on data direction: | |
3377 | * data direction bits in SBALE (SB Type) | |
3378 | * data direction bits in QTCB | |
3379 | * data direction bits in FCP_CMND IU | |
3380 | */ | |
3381 | switch (scsi_cmnd->sc_data_direction) { | |
3382 | case DMA_NONE: | |
1da177e4 LT |
3383 | fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND; |
3384 | /* | |
3385 | * FIXME(qdio): | |
3386 | * what is the correct type for commands | |
3387 | * without 'real' data buffers? | |
3388 | */ | |
3389 | sbtype = SBAL_FLAGS0_TYPE_READ; | |
3390 | break; | |
3391 | case DMA_FROM_DEVICE: | |
1da177e4 LT |
3392 | fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_READ; |
3393 | sbtype = SBAL_FLAGS0_TYPE_READ; | |
3394 | fcp_cmnd_iu->rddata = 1; | |
3395 | break; | |
3396 | case DMA_TO_DEVICE: | |
1da177e4 LT |
3397 | fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_WRITE; |
3398 | sbtype = SBAL_FLAGS0_TYPE_WRITE; | |
3399 | fcp_cmnd_iu->wddata = 1; | |
3400 | break; | |
3401 | case DMA_BIDIRECTIONAL: | |
1da177e4 LT |
3402 | default: |
3403 | /* | |
3404 | * dummy, catch this condition earlier | |
3405 | * in zfcp_scsi_queuecommand | |
3406 | */ | |
3407 | goto failed_scsi_cmnd; | |
3408 | } | |
3409 | ||
3410 | /* set FC service class in QTCB (3 per default) */ | |
3411 | fsf_req->qtcb->bottom.io.service_class = adapter->fc_service_class; | |
3412 | ||
3413 | /* set FCP_LUN in FCP_CMND IU in QTCB */ | |
3414 | fcp_cmnd_iu->fcp_lun = unit->fcp_lun; | |
3415 | ||
3416 | mask = ZFCP_STATUS_UNIT_READONLY | ZFCP_STATUS_UNIT_SHARED; | |
3417 | ||
3418 | /* set task attributes in FCP_CMND IU in QTCB */ | |
3419 | if (likely((scsi_cmnd->device->simple_tags) || | |
3420 | (atomic_test_mask(mask, &unit->status)))) | |
3421 | fcp_cmnd_iu->task_attribute = SIMPLE_Q; | |
3422 | else | |
3423 | fcp_cmnd_iu->task_attribute = UNTAGGED; | |
3424 | ||
3425 | /* set additional length of FCP_CDB in FCP_CMND IU in QTCB, if needed */ | |
3426 | if (unlikely(scsi_cmnd->cmd_len > FCP_CDB_LENGTH)) { | |
3427 | fcp_cmnd_iu->add_fcp_cdb_length | |
3428 | = (scsi_cmnd->cmd_len - FCP_CDB_LENGTH) >> 2; | |
3429 | ZFCP_LOG_TRACE("SCSI CDB length is 0x%x, " | |
3430 | "additional FCP_CDB length is 0x%x " | |
3431 | "(shifted right 2 bits)\n", | |
3432 | scsi_cmnd->cmd_len, | |
3433 | fcp_cmnd_iu->add_fcp_cdb_length); | |
3434 | } | |
3435 | /* | |
3436 | * copy SCSI CDB (including additional length, if any) to | |
3437 | * FCP_CDB in FCP_CMND IU in QTCB | |
3438 | */ | |
3439 | memcpy(fcp_cmnd_iu->fcp_cdb, scsi_cmnd->cmnd, scsi_cmnd->cmd_len); | |
3440 | ||
3441 | /* FCP CMND IU length in QTCB */ | |
3442 | fsf_req->qtcb->bottom.io.fcp_cmnd_length = | |
3443 | sizeof (struct fcp_cmnd_iu) + | |
3444 | fcp_cmnd_iu->add_fcp_cdb_length + sizeof (fcp_dl_t); | |
3445 | ||
3446 | /* generate SBALEs from data buffer */ | |
3447 | real_bytes = zfcp_qdio_sbals_from_scsicmnd(fsf_req, sbtype, scsi_cmnd); | |
3448 | if (unlikely(real_bytes < 0)) { | |
3449 | if (fsf_req->sbal_number < ZFCP_MAX_SBALS_PER_REQ) { | |
3450 | ZFCP_LOG_DEBUG( | |
3451 | "Data did not fit into available buffer(s), " | |
3452 | "waiting for more...\n"); | |
3453 | retval = -EIO; | |
3454 | } else { | |
3455 | ZFCP_LOG_NORMAL("error: No truncation implemented but " | |
3456 | "required. Shutting down unit " | |
3457 | "(adapter %s, port 0x%016Lx, " | |
3458 | "unit 0x%016Lx)\n", | |
3459 | zfcp_get_busid_by_unit(unit), | |
3460 | unit->port->wwpn, | |
3461 | unit->fcp_lun); | |
3462 | zfcp_erp_unit_shutdown(unit, 0); | |
3463 | retval = -EINVAL; | |
3464 | } | |
3465 | goto no_fit; | |
3466 | } | |
3467 | ||
3468 | /* set length of FCP data length in FCP_CMND IU in QTCB */ | |
3469 | zfcp_set_fcp_dl(fcp_cmnd_iu, real_bytes); | |
3470 | ||
3471 | ZFCP_LOG_DEBUG("Sending SCSI command:\n"); | |
3472 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3473 | (char *) scsi_cmnd->cmnd, scsi_cmnd->cmd_len); | |
3474 | ||
3475 | /* | |
3476 | * start QDIO request for this FSF request | |
3477 | * covered by an SBALE) | |
3478 | */ | |
3479 | retval = zfcp_fsf_req_send(fsf_req, timer); | |
3480 | if (unlikely(retval < 0)) { | |
3481 | ZFCP_LOG_INFO("error: Could not send FCP command request " | |
3482 | "on adapter %s, port 0x%016Lx, unit 0x%016Lx\n", | |
3483 | zfcp_get_busid_by_adapter(adapter), | |
3484 | unit->port->wwpn, | |
3485 | unit->fcp_lun); | |
3486 | goto send_failed; | |
3487 | } | |
3488 | ||
3489 | ZFCP_LOG_TRACE("Send FCP Command initiated (adapter %s, " | |
3490 | "port 0x%016Lx, unit 0x%016Lx)\n", | |
3491 | zfcp_get_busid_by_adapter(adapter), | |
3492 | unit->port->wwpn, | |
3493 | unit->fcp_lun); | |
3494 | goto success; | |
3495 | ||
3496 | send_failed: | |
3497 | no_fit: | |
3498 | failed_scsi_cmnd: | |
059c97d0 | 3499 | zfcp_unit_put(unit); |
1da177e4 LT |
3500 | zfcp_fsf_req_free(fsf_req); |
3501 | fsf_req = NULL; | |
3502 | scsi_cmnd->host_scribble = NULL; | |
3503 | success: | |
3504 | failed_req_create: | |
3505 | write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); | |
3506 | return retval; | |
3507 | } | |
3508 | ||
3509 | /* | |
3510 | * function: zfcp_fsf_send_fcp_command_task_management | |
3511 | * | |
3512 | * purpose: | |
3513 | * | |
3514 | * returns: | |
3515 | * | |
3516 | * FIXME(design): should be watched by a timeout!!! | |
3517 | * FIXME(design) shouldn't this be modified to return an int | |
3518 | * also...don't know how though | |
3519 | * | |
3520 | */ | |
3521 | struct zfcp_fsf_req * | |
3522 | zfcp_fsf_send_fcp_command_task_management(struct zfcp_adapter *adapter, | |
3523 | struct zfcp_unit *unit, | |
3524 | u8 tm_flags, int req_flags) | |
3525 | { | |
3526 | struct zfcp_fsf_req *fsf_req = NULL; | |
3527 | int retval = 0; | |
3528 | struct fcp_cmnd_iu *fcp_cmnd_iu; | |
3529 | unsigned long lock_flags; | |
3530 | volatile struct qdio_buffer_element *sbale; | |
3531 | ||
3532 | /* setup new FSF request */ | |
3533 | retval = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, | |
3534 | adapter->pool.fsf_req_scsi, | |
3535 | &lock_flags, &fsf_req); | |
3536 | if (retval < 0) { | |
3537 | ZFCP_LOG_INFO("error: Could not create FCP command (task " | |
3538 | "management) request for adapter %s, port " | |
3539 | " 0x%016Lx, unit 0x%016Lx.\n", | |
3540 | zfcp_get_busid_by_adapter(adapter), | |
3541 | unit->port->wwpn, unit->fcp_lun); | |
3542 | goto out; | |
3543 | } | |
3544 | ||
3545 | /* | |
3546 | * Used to decide on proper handler in the return path, | |
3547 | * could be either zfcp_fsf_send_fcp_command_task_handler or | |
3548 | * zfcp_fsf_send_fcp_command_task_management_handler */ | |
3549 | ||
3550 | fsf_req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT; | |
3551 | ||
3552 | /* | |
3553 | * hold a pointer to the unit being target of this | |
3554 | * task management request | |
3555 | */ | |
059c97d0 | 3556 | fsf_req->data = (unsigned long) unit; |
1da177e4 LT |
3557 | |
3558 | /* set FSF related fields in QTCB */ | |
3559 | fsf_req->qtcb->header.lun_handle = unit->handle; | |
3560 | fsf_req->qtcb->header.port_handle = unit->port->handle; | |
3561 | fsf_req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND; | |
3562 | fsf_req->qtcb->bottom.io.service_class = adapter->fc_service_class; | |
3563 | fsf_req->qtcb->bottom.io.fcp_cmnd_length = | |
3564 | sizeof (struct fcp_cmnd_iu) + sizeof (fcp_dl_t); | |
3565 | ||
3566 | sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); | |
3567 | sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE; | |
3568 | sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; | |
3569 | ||
3570 | /* set FCP related fields in FCP_CMND IU in QTCB */ | |
3571 | fcp_cmnd_iu = (struct fcp_cmnd_iu *) | |
3572 | &(fsf_req->qtcb->bottom.io.fcp_cmnd); | |
3573 | fcp_cmnd_iu->fcp_lun = unit->fcp_lun; | |
3574 | fcp_cmnd_iu->task_management_flags = tm_flags; | |
3575 | ||
3576 | /* start QDIO request for this FSF request */ | |
3577 | zfcp_fsf_start_scsi_er_timer(adapter); | |
3578 | retval = zfcp_fsf_req_send(fsf_req, NULL); | |
3579 | if (retval) { | |
3580 | del_timer(&adapter->scsi_er_timer); | |
3581 | ZFCP_LOG_INFO("error: Could not send an FCP-command (task " | |
3582 | "management) on adapter %s, port 0x%016Lx for " | |
3583 | "unit LUN 0x%016Lx\n", | |
3584 | zfcp_get_busid_by_adapter(adapter), | |
3585 | unit->port->wwpn, | |
3586 | unit->fcp_lun); | |
3587 | zfcp_fsf_req_free(fsf_req); | |
3588 | fsf_req = NULL; | |
3589 | goto out; | |
3590 | } | |
3591 | ||
3592 | ZFCP_LOG_TRACE("Send FCP Command (task management function) initiated " | |
3593 | "(adapter %s, port 0x%016Lx, unit 0x%016Lx, " | |
3594 | "tm_flags=0x%x)\n", | |
3595 | zfcp_get_busid_by_adapter(adapter), | |
3596 | unit->port->wwpn, | |
3597 | unit->fcp_lun, | |
3598 | tm_flags); | |
3599 | out: | |
3600 | write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); | |
3601 | return fsf_req; | |
3602 | } | |
3603 | ||
3604 | /* | |
3605 | * function: zfcp_fsf_send_fcp_command_handler | |
3606 | * | |
3607 | * purpose: is called for finished Send FCP Command | |
3608 | * | |
3609 | * returns: | |
3610 | */ | |
3611 | static int | |
3612 | zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *fsf_req) | |
3613 | { | |
3614 | int retval = -EINVAL; | |
3615 | struct zfcp_unit *unit; | |
3616 | struct fsf_qtcb_header *header; | |
3617 | u16 subtable, rule, counter; | |
3618 | ||
3619 | header = &fsf_req->qtcb->header; | |
3620 | ||
3621 | if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT)) | |
059c97d0 | 3622 | unit = (struct zfcp_unit *) fsf_req->data; |
1da177e4 | 3623 | else |
059c97d0 | 3624 | unit = fsf_req->unit; |
1da177e4 LT |
3625 | |
3626 | if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) { | |
3627 | /* go directly to calls of special handlers */ | |
3628 | goto skip_fsfstatus; | |
3629 | } | |
3630 | ||
3631 | /* evaluate FSF status in QTCB */ | |
3632 | switch (header->fsf_status) { | |
3633 | ||
3634 | case FSF_PORT_HANDLE_NOT_VALID: | |
1da177e4 LT |
3635 | ZFCP_LOG_INFO("Temporary port identifier 0x%x for port " |
3636 | "0x%016Lx on adapter %s invalid\n", | |
3637 | unit->port->handle, | |
3638 | unit->port->wwpn, zfcp_get_busid_by_unit(unit)); | |
3639 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3640 | (char *) &header->fsf_status_qual, | |
3641 | sizeof (union fsf_status_qual)); | |
3642 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
3643 | "fsf_s_phand_nv"); | |
3644 | zfcp_erp_adapter_reopen(unit->port->adapter, 0); | |
3645 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
3646 | break; | |
3647 | ||
3648 | case FSF_LUN_HANDLE_NOT_VALID: | |
1da177e4 LT |
3649 | ZFCP_LOG_INFO("Temporary LUN identifier 0x%x for unit " |
3650 | "0x%016Lx on port 0x%016Lx on adapter %s is " | |
3651 | "invalid. This may happen occasionally.\n", | |
3652 | unit->handle, | |
3653 | unit->fcp_lun, | |
3654 | unit->port->wwpn, | |
3655 | zfcp_get_busid_by_unit(unit)); | |
3656 | ZFCP_LOG_NORMAL("Status qualifier data:\n"); | |
3657 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, | |
3658 | (char *) &header->fsf_status_qual, | |
3659 | sizeof (union fsf_status_qual)); | |
3660 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
3661 | "fsf_s_uhand_nv"); | |
3662 | zfcp_erp_port_reopen(unit->port, 0); | |
3663 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
3664 | break; | |
3665 | ||
3666 | case FSF_HANDLE_MISMATCH: | |
1da177e4 LT |
3667 | ZFCP_LOG_NORMAL("bug: The port handle 0x%x has changed " |
3668 | "unexpectedly. (adapter %s, port 0x%016Lx, " | |
3669 | "unit 0x%016Lx)\n", | |
3670 | unit->port->handle, | |
3671 | zfcp_get_busid_by_unit(unit), | |
3672 | unit->port->wwpn, | |
3673 | unit->fcp_lun); | |
3674 | ZFCP_LOG_NORMAL("status qualifier:\n"); | |
3675 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, | |
3676 | (char *) &header->fsf_status_qual, | |
3677 | sizeof (union fsf_status_qual)); | |
3678 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
3679 | "fsf_s_hand_mis"); | |
3680 | zfcp_erp_adapter_reopen(unit->port->adapter, 0); | |
1da177e4 LT |
3681 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
3682 | break; | |
3683 | ||
3684 | case FSF_SERVICE_CLASS_NOT_SUPPORTED: | |
1da177e4 LT |
3685 | if (fsf_req->adapter->fc_service_class <= 3) { |
3686 | ZFCP_LOG_NORMAL("error: The adapter %s does " | |
3687 | "not support fibrechannel class %d.\n", | |
3688 | zfcp_get_busid_by_unit(unit), | |
3689 | fsf_req->adapter->fc_service_class); | |
3690 | } else { | |
3691 | ZFCP_LOG_NORMAL("bug: The fibrechannel class at " | |
3692 | "adapter %s is invalid. " | |
3693 | "(debug info %d)\n", | |
3694 | zfcp_get_busid_by_unit(unit), | |
3695 | fsf_req->adapter->fc_service_class); | |
3696 | } | |
3697 | /* stop operation for this adapter */ | |
3698 | debug_text_exception(fsf_req->adapter->erp_dbf, 0, | |
3699 | "fsf_s_class_nsup"); | |
3700 | zfcp_erp_adapter_shutdown(unit->port->adapter, 0); | |
1da177e4 LT |
3701 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
3702 | break; | |
3703 | ||
3704 | case FSF_FCPLUN_NOT_VALID: | |
1da177e4 LT |
3705 | ZFCP_LOG_NORMAL("bug: unit 0x%016Lx on port 0x%016Lx on " |
3706 | "adapter %s does not have correct unit " | |
3707 | "handle 0x%x\n", | |
3708 | unit->fcp_lun, | |
3709 | unit->port->wwpn, | |
3710 | zfcp_get_busid_by_unit(unit), | |
3711 | unit->handle); | |
3712 | ZFCP_LOG_DEBUG("status qualifier:\n"); | |
3713 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3714 | (char *) &header->fsf_status_qual, | |
3715 | sizeof (union fsf_status_qual)); | |
3716 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
3717 | "fsf_s_fcp_lun_nv"); | |
3718 | zfcp_erp_port_reopen(unit->port, 0); | |
1da177e4 LT |
3719 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
3720 | break; | |
3721 | ||
3722 | case FSF_ACCESS_DENIED: | |
1da177e4 LT |
3723 | ZFCP_LOG_NORMAL("Access denied, cannot send FCP command to " |
3724 | "unit 0x%016Lx on port 0x%016Lx on " | |
3725 | "adapter %s\n", unit->fcp_lun, unit->port->wwpn, | |
3726 | zfcp_get_busid_by_unit(unit)); | |
3727 | for (counter = 0; counter < 2; counter++) { | |
3728 | subtable = header->fsf_status_qual.halfword[counter * 2]; | |
3729 | rule = header->fsf_status_qual.halfword[counter * 2 + 1]; | |
3730 | switch (subtable) { | |
3731 | case FSF_SQ_CFDC_SUBTABLE_OS: | |
3732 | case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: | |
3733 | case FSF_SQ_CFDC_SUBTABLE_PORT_DID: | |
3734 | case FSF_SQ_CFDC_SUBTABLE_LUN: | |
3735 | ZFCP_LOG_INFO("Access denied (%s rule %d)\n", | |
3736 | zfcp_act_subtable_type[subtable], rule); | |
3737 | break; | |
3738 | } | |
3739 | } | |
3740 | debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_access"); | |
3741 | zfcp_erp_unit_access_denied(unit); | |
3742 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
3743 | break; | |
3744 | ||
3745 | case FSF_DIRECTION_INDICATOR_NOT_VALID: | |
1da177e4 LT |
3746 | ZFCP_LOG_INFO("bug: Invalid data direction given for unit " |
3747 | "0x%016Lx on port 0x%016Lx on adapter %s " | |
3748 | "(debug info %d)\n", | |
3749 | unit->fcp_lun, | |
3750 | unit->port->wwpn, | |
3751 | zfcp_get_busid_by_unit(unit), | |
3752 | fsf_req->qtcb->bottom.io.data_direction); | |
3753 | /* stop operation for this adapter */ | |
3754 | debug_text_event(fsf_req->adapter->erp_dbf, 0, | |
3755 | "fsf_s_dir_ind_nv"); | |
3756 | zfcp_erp_adapter_shutdown(unit->port->adapter, 0); | |
1da177e4 LT |
3757 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
3758 | break; | |
3759 | ||
3760 | case FSF_CMND_LENGTH_NOT_VALID: | |
1da177e4 LT |
3761 | ZFCP_LOG_NORMAL |
3762 | ("bug: An invalid control-data-block length field " | |
3763 | "was found in a command for unit 0x%016Lx on port " | |
3764 | "0x%016Lx on adapter %s " "(debug info %d)\n", | |
3765 | unit->fcp_lun, unit->port->wwpn, | |
3766 | zfcp_get_busid_by_unit(unit), | |
3767 | fsf_req->qtcb->bottom.io.fcp_cmnd_length); | |
3768 | /* stop operation for this adapter */ | |
3769 | debug_text_event(fsf_req->adapter->erp_dbf, 0, | |
3770 | "fsf_s_cmd_len_nv"); | |
3771 | zfcp_erp_adapter_shutdown(unit->port->adapter, 0); | |
1da177e4 LT |
3772 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
3773 | break; | |
3774 | ||
3775 | case FSF_PORT_BOXED: | |
1da177e4 LT |
3776 | ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s " |
3777 | "needs to be reopened\n", | |
3778 | unit->port->wwpn, zfcp_get_busid_by_unit(unit)); | |
3779 | debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_s_pboxed"); | |
d736a27b | 3780 | zfcp_erp_port_boxed(unit->port); |
1da177e4 LT |
3781 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR | |
3782 | ZFCP_STATUS_FSFREQ_RETRY; | |
3783 | break; | |
3784 | ||
3785 | case FSF_LUN_BOXED: | |
1da177e4 LT |
3786 | ZFCP_LOG_NORMAL("unit needs to be reopened (adapter %s, " |
3787 | "wwpn=0x%016Lx, fcp_lun=0x%016Lx)\n", | |
3788 | zfcp_get_busid_by_unit(unit), | |
3789 | unit->port->wwpn, unit->fcp_lun); | |
3790 | debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_lboxed"); | |
d736a27b | 3791 | zfcp_erp_unit_boxed(unit); |
1da177e4 LT |
3792 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR |
3793 | | ZFCP_STATUS_FSFREQ_RETRY; | |
3794 | break; | |
3795 | ||
3796 | case FSF_ADAPTER_STATUS_AVAILABLE: | |
1da177e4 LT |
3797 | switch (header->fsf_status_qual.word[0]) { |
3798 | case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE: | |
1da177e4 LT |
3799 | /* re-establish link to port */ |
3800 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
3801 | "fsf_sq_ltest"); | |
65a8d4e1 | 3802 | zfcp_test_link(unit->port); |
1da177e4 LT |
3803 | break; |
3804 | case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED: | |
1da177e4 LT |
3805 | /* FIXME(hw) need proper specs for proper action */ |
3806 | /* let scsi stack deal with retries and escalation */ | |
3807 | debug_text_event(fsf_req->adapter->erp_dbf, 1, | |
3808 | "fsf_sq_ulp"); | |
1da177e4 LT |
3809 | break; |
3810 | default: | |
1da177e4 | 3811 | ZFCP_LOG_NORMAL |
516a4201 | 3812 | ("Unknown status qualifier 0x%x arrived.\n", |
1da177e4 LT |
3813 | header->fsf_status_qual.word[0]); |
3814 | debug_text_event(fsf_req->adapter->erp_dbf, 0, | |
3815 | "fsf_sq_inval:"); | |
3816 | debug_exception(fsf_req->adapter->erp_dbf, 0, | |
3817 | &header->fsf_status_qual.word[0], | |
3818 | sizeof(u32)); | |
3819 | break; | |
3820 | } | |
516a4201 | 3821 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; |
1da177e4 LT |
3822 | break; |
3823 | ||
3824 | case FSF_GOOD: | |
1da177e4 LT |
3825 | break; |
3826 | ||
3827 | case FSF_FCP_RSP_AVAILABLE: | |
1da177e4 LT |
3828 | break; |
3829 | ||
3830 | default: | |
3831 | debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_s_inval:"); | |
3832 | debug_exception(fsf_req->adapter->erp_dbf, 0, | |
3833 | &header->fsf_status, sizeof(u32)); | |
3834 | break; | |
3835 | } | |
3836 | ||
3837 | skip_fsfstatus: | |
3838 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT) { | |
3839 | retval = | |
3840 | zfcp_fsf_send_fcp_command_task_management_handler(fsf_req); | |
3841 | } else { | |
3842 | retval = zfcp_fsf_send_fcp_command_task_handler(fsf_req); | |
059c97d0 AH |
3843 | fsf_req->unit = NULL; |
3844 | zfcp_unit_put(unit); | |
1da177e4 LT |
3845 | } |
3846 | return retval; | |
3847 | } | |
3848 | ||
3849 | /* | |
3850 | * function: zfcp_fsf_send_fcp_command_task_handler | |
3851 | * | |
3852 | * purpose: evaluates FCP_RSP IU | |
3853 | * | |
3854 | * returns: | |
3855 | */ | |
3856 | static int | |
3857 | zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req) | |
3858 | { | |
3859 | int retval = 0; | |
3860 | struct scsi_cmnd *scpnt; | |
3861 | struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *) | |
3862 | &(fsf_req->qtcb->bottom.io.fcp_rsp); | |
3863 | struct fcp_cmnd_iu *fcp_cmnd_iu = (struct fcp_cmnd_iu *) | |
3864 | &(fsf_req->qtcb->bottom.io.fcp_cmnd); | |
3865 | u32 sns_len; | |
3866 | char *fcp_rsp_info = zfcp_get_fcp_rsp_info_ptr(fcp_rsp_iu); | |
3867 | unsigned long flags; | |
059c97d0 | 3868 | struct zfcp_unit *unit = fsf_req->unit; |
1da177e4 LT |
3869 | |
3870 | read_lock_irqsave(&fsf_req->adapter->abort_lock, flags); | |
059c97d0 | 3871 | scpnt = (struct scsi_cmnd *) fsf_req->data; |
1da177e4 LT |
3872 | if (unlikely(!scpnt)) { |
3873 | ZFCP_LOG_DEBUG | |
3874 | ("Command with fsf_req %p is not associated to " | |
3875 | "a scsi command anymore. Aborted?\n", fsf_req); | |
3876 | goto out; | |
3877 | } | |
3878 | if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTED)) { | |
3879 | /* FIXME: (design) mid-layer should handle DID_ABORT like | |
3880 | * DID_SOFT_ERROR by retrying the request for devices | |
3881 | * that allow retries. | |
3882 | */ | |
3883 | ZFCP_LOG_DEBUG("Setting DID_SOFT_ERROR and SUGGEST_RETRY\n"); | |
3884 | set_host_byte(&scpnt->result, DID_SOFT_ERROR); | |
3885 | set_driver_byte(&scpnt->result, SUGGEST_RETRY); | |
3886 | goto skip_fsfstatus; | |
3887 | } | |
3888 | ||
3889 | if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) { | |
3890 | ZFCP_LOG_DEBUG("Setting DID_ERROR\n"); | |
3891 | set_host_byte(&scpnt->result, DID_ERROR); | |
3892 | goto skip_fsfstatus; | |
3893 | } | |
3894 | ||
3895 | /* set message byte of result in SCSI command */ | |
3896 | scpnt->result |= COMMAND_COMPLETE << 8; | |
3897 | ||
3898 | /* | |
3899 | * copy SCSI status code of FCP_STATUS of FCP_RSP IU to status byte | |
3900 | * of result in SCSI command | |
3901 | */ | |
3902 | scpnt->result |= fcp_rsp_iu->scsi_status; | |
3903 | if (unlikely(fcp_rsp_iu->scsi_status)) { | |
3904 | /* DEBUG */ | |
3905 | ZFCP_LOG_DEBUG("status for SCSI Command:\n"); | |
3906 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3907 | scpnt->cmnd, scpnt->cmd_len); | |
3908 | ZFCP_LOG_DEBUG("SCSI status code 0x%x\n", | |
3909 | fcp_rsp_iu->scsi_status); | |
3910 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3911 | (void *) fcp_rsp_iu, sizeof (struct fcp_rsp_iu)); | |
3912 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3913 | zfcp_get_fcp_sns_info_ptr(fcp_rsp_iu), | |
3914 | fcp_rsp_iu->fcp_sns_len); | |
3915 | } | |
3916 | ||
3917 | /* check FCP_RSP_INFO */ | |
3918 | if (unlikely(fcp_rsp_iu->validity.bits.fcp_rsp_len_valid)) { | |
3919 | ZFCP_LOG_DEBUG("rsp_len is valid\n"); | |
3920 | switch (fcp_rsp_info[3]) { | |
3921 | case RSP_CODE_GOOD: | |
1da177e4 LT |
3922 | /* ok, continue */ |
3923 | ZFCP_LOG_TRACE("no failure or Task Management " | |
3924 | "Function complete\n"); | |
3925 | set_host_byte(&scpnt->result, DID_OK); | |
3926 | break; | |
3927 | case RSP_CODE_LENGTH_MISMATCH: | |
1da177e4 LT |
3928 | /* hardware bug */ |
3929 | ZFCP_LOG_NORMAL("bug: FCP response code indictates " | |
3930 | "that the fibrechannel protocol data " | |
3931 | "length differs from the burst length. " | |
3932 | "The problem occured on unit 0x%016Lx " | |
3933 | "on port 0x%016Lx on adapter %s", | |
3934 | unit->fcp_lun, | |
3935 | unit->port->wwpn, | |
3936 | zfcp_get_busid_by_unit(unit)); | |
3937 | /* dump SCSI CDB as prepared by zfcp */ | |
3938 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3939 | (char *) &fsf_req->qtcb-> | |
3940 | bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE); | |
1da177e4 LT |
3941 | set_host_byte(&scpnt->result, DID_ERROR); |
3942 | goto skip_fsfstatus; | |
3943 | case RSP_CODE_FIELD_INVALID: | |
1da177e4 LT |
3944 | /* driver or hardware bug */ |
3945 | ZFCP_LOG_NORMAL("bug: FCP response code indictates " | |
3946 | "that the fibrechannel protocol data " | |
3947 | "fields were incorrectly set up. " | |
3948 | "The problem occured on the unit " | |
3949 | "0x%016Lx on port 0x%016Lx on " | |
3950 | "adapter %s", | |
3951 | unit->fcp_lun, | |
3952 | unit->port->wwpn, | |
3953 | zfcp_get_busid_by_unit(unit)); | |
3954 | /* dump SCSI CDB as prepared by zfcp */ | |
3955 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3956 | (char *) &fsf_req->qtcb-> | |
3957 | bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE); | |
3958 | set_host_byte(&scpnt->result, DID_ERROR); | |
1da177e4 LT |
3959 | goto skip_fsfstatus; |
3960 | case RSP_CODE_RO_MISMATCH: | |
1da177e4 LT |
3961 | /* hardware bug */ |
3962 | ZFCP_LOG_NORMAL("bug: The FCP response code indicates " | |
3963 | "that conflicting values for the " | |
3964 | "fibrechannel payload offset from the " | |
3965 | "header were found. " | |
3966 | "The problem occured on unit 0x%016Lx " | |
3967 | "on port 0x%016Lx on adapter %s.\n", | |
3968 | unit->fcp_lun, | |
3969 | unit->port->wwpn, | |
3970 | zfcp_get_busid_by_unit(unit)); | |
3971 | /* dump SCSI CDB as prepared by zfcp */ | |
3972 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3973 | (char *) &fsf_req->qtcb-> | |
3974 | bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE); | |
1da177e4 LT |
3975 | set_host_byte(&scpnt->result, DID_ERROR); |
3976 | goto skip_fsfstatus; | |
3977 | default: | |
3978 | ZFCP_LOG_NORMAL("bug: An invalid FCP response " | |
3979 | "code was detected for a command. " | |
3980 | "The problem occured on the unit " | |
3981 | "0x%016Lx on port 0x%016Lx on " | |
3982 | "adapter %s (debug info 0x%x)\n", | |
3983 | unit->fcp_lun, | |
3984 | unit->port->wwpn, | |
3985 | zfcp_get_busid_by_unit(unit), | |
3986 | fcp_rsp_info[3]); | |
3987 | /* dump SCSI CDB as prepared by zfcp */ | |
3988 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, | |
3989 | (char *) &fsf_req->qtcb-> | |
3990 | bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE); | |
1da177e4 | 3991 | set_host_byte(&scpnt->result, DID_ERROR); |
6f71d9bc | 3992 | goto skip_fsfstatus; |
1da177e4 LT |
3993 | } |
3994 | } | |
3995 | ||
3996 | /* check for sense data */ | |
3997 | if (unlikely(fcp_rsp_iu->validity.bits.fcp_sns_len_valid)) { | |
3998 | sns_len = FSF_FCP_RSP_SIZE - | |
3999 | sizeof (struct fcp_rsp_iu) + fcp_rsp_iu->fcp_rsp_len; | |
4000 | ZFCP_LOG_TRACE("room for %i bytes sense data in QTCB\n", | |
4001 | sns_len); | |
4002 | sns_len = min(sns_len, (u32) SCSI_SENSE_BUFFERSIZE); | |
4003 | ZFCP_LOG_TRACE("room for %i bytes sense data in SCSI command\n", | |
4004 | SCSI_SENSE_BUFFERSIZE); | |
4005 | sns_len = min(sns_len, fcp_rsp_iu->fcp_sns_len); | |
4006 | ZFCP_LOG_TRACE("scpnt->result =0x%x, command was:\n", | |
4007 | scpnt->result); | |
4008 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, | |
4009 | (void *) &scpnt->cmnd, scpnt->cmd_len); | |
4010 | ||
4011 | ZFCP_LOG_TRACE("%i bytes sense data provided by FCP\n", | |
4012 | fcp_rsp_iu->fcp_sns_len); | |
4013 | memcpy(&scpnt->sense_buffer, | |
4014 | zfcp_get_fcp_sns_info_ptr(fcp_rsp_iu), sns_len); | |
4015 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, | |
4016 | (void *) &scpnt->sense_buffer, sns_len); | |
4017 | } | |
4018 | ||
4019 | /* check for overrun */ | |
4020 | if (unlikely(fcp_rsp_iu->validity.bits.fcp_resid_over)) { | |
4021 | ZFCP_LOG_INFO("A data overrun was detected for a command. " | |
4022 | "unit 0x%016Lx, port 0x%016Lx, adapter %s. " | |
4023 | "The response data length is " | |
4024 | "%d, the original length was %d.\n", | |
4025 | unit->fcp_lun, | |
4026 | unit->port->wwpn, | |
4027 | zfcp_get_busid_by_unit(unit), | |
4028 | fcp_rsp_iu->fcp_resid, | |
4029 | (int) zfcp_get_fcp_dl(fcp_cmnd_iu)); | |
4030 | } | |
4031 | ||
4032 | /* check for underrun */ | |
4033 | if (unlikely(fcp_rsp_iu->validity.bits.fcp_resid_under)) { | |
4034 | ZFCP_LOG_INFO("A data underrun was detected for a command. " | |
4035 | "unit 0x%016Lx, port 0x%016Lx, adapter %s. " | |
4036 | "The response data length is " | |
4037 | "%d, the original length was %d.\n", | |
4038 | unit->fcp_lun, | |
4039 | unit->port->wwpn, | |
4040 | zfcp_get_busid_by_unit(unit), | |
4041 | fcp_rsp_iu->fcp_resid, | |
4042 | (int) zfcp_get_fcp_dl(fcp_cmnd_iu)); | |
4043 | ||
4044 | scpnt->resid = fcp_rsp_iu->fcp_resid; | |
4045 | if (scpnt->request_bufflen - scpnt->resid < scpnt->underflow) | |
6f71d9bc | 4046 | set_host_byte(&scpnt->result, DID_ERROR); |
1da177e4 LT |
4047 | } |
4048 | ||
4049 | skip_fsfstatus: | |
4050 | ZFCP_LOG_DEBUG("scpnt->result =0x%x\n", scpnt->result); | |
4051 | ||
8a36e453 MS |
4052 | if (scpnt->result != 0) |
4053 | zfcp_scsi_dbf_event_result("erro", 3, fsf_req->adapter, scpnt); | |
4054 | else if (scpnt->retries > 0) | |
4055 | zfcp_scsi_dbf_event_result("retr", 4, fsf_req->adapter, scpnt); | |
4056 | else | |
4057 | zfcp_scsi_dbf_event_result("norm", 6, fsf_req->adapter, scpnt); | |
1da177e4 LT |
4058 | |
4059 | /* cleanup pointer (need this especially for abort) */ | |
4060 | scpnt->host_scribble = NULL; | |
4061 | ||
1da177e4 | 4062 | /* always call back */ |
1da177e4 LT |
4063 | (scpnt->scsi_done) (scpnt); |
4064 | ||
4065 | /* | |
4066 | * We must hold this lock until scsi_done has been called. | |
4067 | * Otherwise we may call scsi_done after abort regarding this | |
4068 | * command has completed. | |
4069 | * Note: scsi_done must not block! | |
4070 | */ | |
4071 | out: | |
4072 | read_unlock_irqrestore(&fsf_req->adapter->abort_lock, flags); | |
4073 | return retval; | |
4074 | } | |
4075 | ||
4076 | /* | |
4077 | * function: zfcp_fsf_send_fcp_command_task_management_handler | |
4078 | * | |
4079 | * purpose: evaluates FCP_RSP IU | |
4080 | * | |
4081 | * returns: | |
4082 | */ | |
4083 | static int | |
4084 | zfcp_fsf_send_fcp_command_task_management_handler(struct zfcp_fsf_req *fsf_req) | |
4085 | { | |
4086 | int retval = 0; | |
4087 | struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *) | |
4088 | &(fsf_req->qtcb->bottom.io.fcp_rsp); | |
4089 | char *fcp_rsp_info = zfcp_get_fcp_rsp_info_ptr(fcp_rsp_iu); | |
059c97d0 | 4090 | struct zfcp_unit *unit = (struct zfcp_unit *) fsf_req->data; |
1da177e4 LT |
4091 | |
4092 | del_timer(&fsf_req->adapter->scsi_er_timer); | |
4093 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { | |
4094 | fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED; | |
4095 | goto skip_fsfstatus; | |
4096 | } | |
4097 | ||
4098 | /* check FCP_RSP_INFO */ | |
4099 | switch (fcp_rsp_info[3]) { | |
4100 | case RSP_CODE_GOOD: | |
1da177e4 LT |
4101 | /* ok, continue */ |
4102 | ZFCP_LOG_DEBUG("no failure or Task Management " | |
4103 | "Function complete\n"); | |
4104 | break; | |
4105 | case RSP_CODE_TASKMAN_UNSUPP: | |
1da177e4 LT |
4106 | ZFCP_LOG_NORMAL("bug: A reuested task management function " |
4107 | "is not supported on the target device " | |
4108 | "unit 0x%016Lx, port 0x%016Lx, adapter %s\n ", | |
4109 | unit->fcp_lun, | |
4110 | unit->port->wwpn, | |
4111 | zfcp_get_busid_by_unit(unit)); | |
4112 | fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP; | |
4113 | break; | |
4114 | case RSP_CODE_TASKMAN_FAILED: | |
1da177e4 LT |
4115 | ZFCP_LOG_NORMAL("bug: A reuested task management function " |
4116 | "failed to complete successfully. " | |
4117 | "unit 0x%016Lx, port 0x%016Lx, adapter %s.\n", | |
4118 | unit->fcp_lun, | |
4119 | unit->port->wwpn, | |
4120 | zfcp_get_busid_by_unit(unit)); | |
4121 | fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED; | |
4122 | break; | |
4123 | default: | |
4124 | ZFCP_LOG_NORMAL("bug: An invalid FCP response " | |
4125 | "code was detected for a command. " | |
4126 | "unit 0x%016Lx, port 0x%016Lx, adapter %s " | |
4127 | "(debug info 0x%x)\n", | |
4128 | unit->fcp_lun, | |
4129 | unit->port->wwpn, | |
4130 | zfcp_get_busid_by_unit(unit), | |
4131 | fcp_rsp_info[3]); | |
4132 | fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED; | |
4133 | } | |
4134 | ||
4135 | skip_fsfstatus: | |
4136 | return retval; | |
4137 | } | |
4138 | ||
4139 | ||
4140 | /* | |
4141 | * function: zfcp_fsf_control_file | |
4142 | * | |
4143 | * purpose: Initiator of the control file upload/download FSF requests | |
4144 | * | |
4145 | * returns: 0 - FSF request is successfuly created and queued | |
4146 | * -EOPNOTSUPP - The FCP adapter does not have Control File support | |
4147 | * -EINVAL - Invalid direction specified | |
4148 | * -ENOMEM - Insufficient memory | |
4149 | * -EPERM - Cannot create FSF request or place it in QDIO queue | |
4150 | */ | |
4151 | int | |
4152 | zfcp_fsf_control_file(struct zfcp_adapter *adapter, | |
4153 | struct zfcp_fsf_req **fsf_req_ptr, | |
4154 | u32 fsf_command, | |
4155 | u32 option, | |
4156 | struct zfcp_sg_list *sg_list) | |
4157 | { | |
4158 | struct zfcp_fsf_req *fsf_req; | |
4159 | struct fsf_qtcb_bottom_support *bottom; | |
4160 | volatile struct qdio_buffer_element *sbale; | |
4161 | struct timer_list *timer; | |
4162 | unsigned long lock_flags; | |
4163 | int req_flags = 0; | |
4164 | int direction; | |
4165 | int retval = 0; | |
4166 | ||
4167 | if (!(adapter->supported_features & FSF_FEATURE_CFDC)) { | |
4168 | ZFCP_LOG_INFO("cfdc not supported (adapter %s)\n", | |
4169 | zfcp_get_busid_by_adapter(adapter)); | |
4170 | retval = -EOPNOTSUPP; | |
4171 | goto out; | |
4172 | } | |
4173 | ||
4174 | switch (fsf_command) { | |
4175 | ||
4176 | case FSF_QTCB_DOWNLOAD_CONTROL_FILE: | |
4177 | direction = SBAL_FLAGS0_TYPE_WRITE; | |
4178 | if ((option != FSF_CFDC_OPTION_FULL_ACCESS) && | |
4179 | (option != FSF_CFDC_OPTION_RESTRICTED_ACCESS)) | |
4180 | req_flags = ZFCP_WAIT_FOR_SBAL; | |
4181 | break; | |
4182 | ||
4183 | case FSF_QTCB_UPLOAD_CONTROL_FILE: | |
4184 | direction = SBAL_FLAGS0_TYPE_READ; | |
4185 | break; | |
4186 | ||
4187 | default: | |
4188 | ZFCP_LOG_INFO("Invalid FSF command code 0x%08x\n", fsf_command); | |
4189 | retval = -EINVAL; | |
4190 | goto out; | |
4191 | } | |
4192 | ||
4193 | timer = kmalloc(sizeof(struct timer_list), GFP_KERNEL); | |
4194 | if (!timer) { | |
4195 | retval = -ENOMEM; | |
4196 | goto out; | |
4197 | } | |
4198 | ||
4199 | retval = zfcp_fsf_req_create(adapter, fsf_command, req_flags, | |
4200 | NULL, &lock_flags, &fsf_req); | |
4201 | if (retval < 0) { | |
4202 | ZFCP_LOG_INFO("error: Could not create FSF request for the " | |
4203 | "adapter %s\n", | |
4204 | zfcp_get_busid_by_adapter(adapter)); | |
4205 | retval = -EPERM; | |
4206 | goto unlock_queue_lock; | |
4207 | } | |
4208 | ||
4209 | sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); | |
4210 | sbale[0].flags |= direction; | |
4211 | ||
4212 | bottom = &fsf_req->qtcb->bottom.support; | |
4213 | bottom->operation_subtype = FSF_CFDC_OPERATION_SUBTYPE; | |
4214 | bottom->option = option; | |
4215 | ||
4216 | if (sg_list->count > 0) { | |
4217 | int bytes; | |
4218 | ||
4219 | bytes = zfcp_qdio_sbals_from_sg(fsf_req, direction, | |
4220 | sg_list->sg, sg_list->count, | |
4221 | ZFCP_MAX_SBALS_PER_REQ); | |
4222 | if (bytes != ZFCP_CFDC_MAX_CONTROL_FILE_SIZE) { | |
4223 | ZFCP_LOG_INFO( | |
4224 | "error: Could not create sufficient number of " | |
4225 | "SBALS for an FSF request to the adapter %s\n", | |
4226 | zfcp_get_busid_by_adapter(adapter)); | |
4227 | retval = -ENOMEM; | |
4228 | goto free_fsf_req; | |
4229 | } | |
4230 | } else | |
4231 | sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; | |
4232 | ||
4233 | init_timer(timer); | |
4234 | timer->function = zfcp_fsf_request_timeout_handler; | |
4235 | timer->data = (unsigned long) adapter; | |
4236 | timer->expires = ZFCP_FSF_REQUEST_TIMEOUT; | |
4237 | ||
4238 | retval = zfcp_fsf_req_send(fsf_req, timer); | |
4239 | if (retval < 0) { | |
4240 | ZFCP_LOG_INFO("initiation of cfdc up/download failed" | |
4241 | "(adapter %s)\n", | |
4242 | zfcp_get_busid_by_adapter(adapter)); | |
4243 | retval = -EPERM; | |
4244 | goto free_fsf_req; | |
4245 | } | |
4246 | write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); | |
4247 | ||
4248 | ZFCP_LOG_NORMAL("Control file %s FSF request has been sent to the " | |
4249 | "adapter %s\n", | |
4250 | fsf_command == FSF_QTCB_DOWNLOAD_CONTROL_FILE ? | |
4251 | "download" : "upload", | |
4252 | zfcp_get_busid_by_adapter(adapter)); | |
4253 | ||
4254 | wait_event(fsf_req->completion_wq, | |
4255 | fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED); | |
4256 | ||
4257 | *fsf_req_ptr = fsf_req; | |
4258 | del_timer_sync(timer); | |
4259 | goto free_timer; | |
4260 | ||
4261 | free_fsf_req: | |
4262 | zfcp_fsf_req_free(fsf_req); | |
4263 | unlock_queue_lock: | |
4264 | write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); | |
4265 | free_timer: | |
4266 | kfree(timer); | |
4267 | out: | |
4268 | return retval; | |
4269 | } | |
4270 | ||
4271 | ||
4272 | /* | |
4273 | * function: zfcp_fsf_control_file_handler | |
4274 | * | |
4275 | * purpose: Handler of the control file upload/download FSF requests | |
4276 | * | |
4277 | * returns: 0 - FSF request successfuly processed | |
4278 | * -EAGAIN - Operation has to be repeated because of a temporary problem | |
4279 | * -EACCES - There is no permission to execute an operation | |
4280 | * -EPERM - The control file is not in a right format | |
4281 | * -EIO - There is a problem with the FCP adapter | |
4282 | * -EINVAL - Invalid operation | |
4283 | * -EFAULT - User space memory I/O operation fault | |
4284 | */ | |
4285 | static int | |
4286 | zfcp_fsf_control_file_handler(struct zfcp_fsf_req *fsf_req) | |
4287 | { | |
4288 | struct zfcp_adapter *adapter = fsf_req->adapter; | |
4289 | struct fsf_qtcb_header *header = &fsf_req->qtcb->header; | |
4290 | struct fsf_qtcb_bottom_support *bottom = &fsf_req->qtcb->bottom.support; | |
4291 | int retval = 0; | |
4292 | ||
4293 | if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { | |
4294 | retval = -EINVAL; | |
4295 | goto skip_fsfstatus; | |
4296 | } | |
4297 | ||
4298 | switch (header->fsf_status) { | |
4299 | ||
4300 | case FSF_GOOD: | |
1da177e4 LT |
4301 | ZFCP_LOG_NORMAL( |
4302 | "The FSF request has been successfully completed " | |
4303 | "on the adapter %s\n", | |
4304 | zfcp_get_busid_by_adapter(adapter)); | |
4305 | break; | |
4306 | ||
4307 | case FSF_OPERATION_PARTIALLY_SUCCESSFUL: | |
1da177e4 LT |
4308 | if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE) { |
4309 | switch (header->fsf_status_qual.word[0]) { | |
4310 | ||
6f71d9bc JB |
4311 | case FSF_SQ_CFDC_HARDENED_ON_SE: |
4312 | ZFCP_LOG_NORMAL( | |
4313 | "CFDC on the adapter %s has being " | |
4314 | "hardened on primary and secondary SE\n", | |
4315 | zfcp_get_busid_by_adapter(adapter)); | |
4316 | break; | |
4317 | ||
1da177e4 LT |
4318 | case FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE: |
4319 | ZFCP_LOG_NORMAL( | |
4320 | "CFDC of the adapter %s could not " | |
4321 | "be saved on the SE\n", | |
4322 | zfcp_get_busid_by_adapter(adapter)); | |
4323 | break; | |
4324 | ||
4325 | case FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE2: | |
4326 | ZFCP_LOG_NORMAL( | |
4327 | "CFDC of the adapter %s could not " | |
4328 | "be copied to the secondary SE\n", | |
4329 | zfcp_get_busid_by_adapter(adapter)); | |
4330 | break; | |
4331 | ||
4332 | default: | |
4333 | ZFCP_LOG_NORMAL( | |
4334 | "CFDC could not be hardened " | |
4335 | "on the adapter %s\n", | |
4336 | zfcp_get_busid_by_adapter(adapter)); | |
4337 | } | |
4338 | } | |
4339 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
4340 | retval = -EAGAIN; | |
4341 | break; | |
4342 | ||
4343 | case FSF_AUTHORIZATION_FAILURE: | |
1da177e4 LT |
4344 | ZFCP_LOG_NORMAL( |
4345 | "Adapter %s does not accept privileged commands\n", | |
4346 | zfcp_get_busid_by_adapter(adapter)); | |
4347 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
4348 | retval = -EACCES; | |
4349 | break; | |
4350 | ||
4351 | case FSF_CFDC_ERROR_DETECTED: | |
1da177e4 LT |
4352 | ZFCP_LOG_NORMAL( |
4353 | "Error at position %d in the CFDC, " | |
4354 | "CFDC is discarded by the adapter %s\n", | |
4355 | header->fsf_status_qual.word[0], | |
4356 | zfcp_get_busid_by_adapter(adapter)); | |
4357 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
4358 | retval = -EPERM; | |
4359 | break; | |
4360 | ||
4361 | case FSF_CONTROL_FILE_UPDATE_ERROR: | |
1da177e4 LT |
4362 | ZFCP_LOG_NORMAL( |
4363 | "Adapter %s cannot harden the control file, " | |
4364 | "file is discarded\n", | |
4365 | zfcp_get_busid_by_adapter(adapter)); | |
4366 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
4367 | retval = -EIO; | |
4368 | break; | |
4369 | ||
4370 | case FSF_CONTROL_FILE_TOO_LARGE: | |
1da177e4 LT |
4371 | ZFCP_LOG_NORMAL( |
4372 | "Control file is too large, file is discarded " | |
4373 | "by the adapter %s\n", | |
4374 | zfcp_get_busid_by_adapter(adapter)); | |
4375 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
4376 | retval = -EIO; | |
4377 | break; | |
4378 | ||
4379 | case FSF_ACCESS_CONFLICT_DETECTED: | |
1da177e4 LT |
4380 | if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE) |
4381 | ZFCP_LOG_NORMAL( | |
4382 | "CFDC has been discarded by the adapter %s, " | |
4383 | "because activation would impact " | |
4384 | "%d active connection(s)\n", | |
4385 | zfcp_get_busid_by_adapter(adapter), | |
4386 | header->fsf_status_qual.word[0]); | |
4387 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
4388 | retval = -EIO; | |
4389 | break; | |
4390 | ||
4391 | case FSF_CONFLICTS_OVERRULED: | |
1da177e4 LT |
4392 | if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE) |
4393 | ZFCP_LOG_NORMAL( | |
4394 | "CFDC has been activated on the adapter %s, " | |
4395 | "but activation has impacted " | |
4396 | "%d active connection(s)\n", | |
4397 | zfcp_get_busid_by_adapter(adapter), | |
4398 | header->fsf_status_qual.word[0]); | |
4399 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
4400 | retval = -EIO; | |
4401 | break; | |
4402 | ||
4403 | case FSF_UNKNOWN_OP_SUBTYPE: | |
1da177e4 LT |
4404 | ZFCP_LOG_NORMAL("unknown operation subtype (adapter: %s, " |
4405 | "op_subtype=0x%x)\n", | |
4406 | zfcp_get_busid_by_adapter(adapter), | |
4407 | bottom->operation_subtype); | |
4408 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
4409 | retval = -EINVAL; | |
4410 | break; | |
4411 | ||
4412 | case FSF_INVALID_COMMAND_OPTION: | |
1da177e4 LT |
4413 | ZFCP_LOG_NORMAL( |
4414 | "Invalid option 0x%x has been specified " | |
4415 | "in QTCB bottom sent to the adapter %s\n", | |
4416 | bottom->option, | |
4417 | zfcp_get_busid_by_adapter(adapter)); | |
4418 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
4419 | retval = -EINVAL; | |
4420 | break; | |
4421 | ||
4422 | default: | |
4423 | ZFCP_LOG_NORMAL( | |
4424 | "bug: An unknown/unexpected FSF status 0x%08x " | |
4425 | "was presented on the adapter %s\n", | |
4426 | header->fsf_status, | |
4427 | zfcp_get_busid_by_adapter(adapter)); | |
4428 | debug_text_event(fsf_req->adapter->erp_dbf, 0, "fsf_sq_inval"); | |
4429 | debug_exception(fsf_req->adapter->erp_dbf, 0, | |
4430 | &header->fsf_status_qual.word[0], sizeof(u32)); | |
4431 | fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; | |
4432 | retval = -EINVAL; | |
4433 | break; | |
4434 | } | |
4435 | ||
4436 | skip_fsfstatus: | |
4437 | return retval; | |
4438 | } | |
4439 | ||
1da177e4 LT |
4440 | static inline int |
4441 | zfcp_fsf_req_sbal_check(unsigned long *flags, | |
4442 | struct zfcp_qdio_queue *queue, int needed) | |
4443 | { | |
4444 | write_lock_irqsave(&queue->queue_lock, *flags); | |
4445 | if (likely(atomic_read(&queue->free_count) >= needed)) | |
4446 | return 1; | |
4447 | write_unlock_irqrestore(&queue->queue_lock, *flags); | |
4448 | return 0; | |
4449 | } | |
4450 | ||
4451 | /* | |
4452 | * set qtcb pointer in fsf_req and initialize QTCB | |
4453 | */ | |
4454 | static inline void | |
8a36e453 | 4455 | zfcp_fsf_req_qtcb_init(struct zfcp_fsf_req *fsf_req) |
1da177e4 LT |
4456 | { |
4457 | if (likely(fsf_req->qtcb != NULL)) { | |
8a36e453 | 4458 | fsf_req->qtcb->prefix.req_seq_no = fsf_req->adapter->fsf_req_seq_no; |
1da177e4 LT |
4459 | fsf_req->qtcb->prefix.req_id = (unsigned long)fsf_req; |
4460 | fsf_req->qtcb->prefix.ulp_info = ZFCP_ULP_INFO_VERSION; | |
8a36e453 | 4461 | fsf_req->qtcb->prefix.qtcb_type = fsf_qtcb_type[fsf_req->fsf_command]; |
1da177e4 LT |
4462 | fsf_req->qtcb->prefix.qtcb_version = ZFCP_QTCB_VERSION; |
4463 | fsf_req->qtcb->header.req_handle = (unsigned long)fsf_req; | |
8a36e453 | 4464 | fsf_req->qtcb->header.fsf_command = fsf_req->fsf_command; |
1da177e4 LT |
4465 | } |
4466 | } | |
4467 | ||
4468 | /** | |
4469 | * zfcp_fsf_req_sbal_get - try to get one SBAL in the request queue | |
4470 | * @adapter: adapter for which request queue is examined | |
4471 | * @req_flags: flags indicating whether to wait for needed SBAL or not | |
4472 | * @lock_flags: lock_flags if queue_lock is taken | |
4473 | * Return: 0 on success, otherwise -EIO, or -ERESTARTSYS | |
4474 | * Locks: lock adapter->request_queue->queue_lock on success | |
4475 | */ | |
4476 | static int | |
4477 | zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter, int req_flags, | |
4478 | unsigned long *lock_flags) | |
4479 | { | |
4480 | long ret; | |
4481 | struct zfcp_qdio_queue *req_queue = &adapter->request_queue; | |
4482 | ||
4483 | if (unlikely(req_flags & ZFCP_WAIT_FOR_SBAL)) { | |
4484 | ret = wait_event_interruptible_timeout(adapter->request_wq, | |
4485 | zfcp_fsf_req_sbal_check(lock_flags, req_queue, 1), | |
4486 | ZFCP_SBAL_TIMEOUT); | |
4487 | if (ret < 0) | |
4488 | return ret; | |
4489 | if (!ret) | |
4490 | return -EIO; | |
4491 | } else if (!zfcp_fsf_req_sbal_check(lock_flags, req_queue, 1)) | |
4492 | return -EIO; | |
4493 | ||
4494 | return 0; | |
4495 | } | |
4496 | ||
4497 | /* | |
4498 | * function: zfcp_fsf_req_create | |
4499 | * | |
4500 | * purpose: create an FSF request at the specified adapter and | |
4501 | * setup common fields | |
4502 | * | |
4503 | * returns: -ENOMEM if there was insufficient memory for a request | |
4504 | * -EIO if no qdio buffers could be allocate to the request | |
4505 | * -EINVAL/-EPERM on bug conditions in req_dequeue | |
4506 | * 0 in success | |
4507 | * | |
4508 | * note: The created request is returned by reference. | |
4509 | * | |
4510 | * locks: lock of concerned request queue must not be held, | |
4511 | * but is held on completion (write, irqsave) | |
4512 | */ | |
4513 | int | |
4514 | zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags, | |
4515 | mempool_t *pool, unsigned long *lock_flags, | |
4516 | struct zfcp_fsf_req **fsf_req_p) | |
4517 | { | |
4518 | volatile struct qdio_buffer_element *sbale; | |
4519 | struct zfcp_fsf_req *fsf_req = NULL; | |
4520 | int ret = 0; | |
4521 | struct zfcp_qdio_queue *req_queue = &adapter->request_queue; | |
4522 | ||
4523 | /* allocate new FSF request */ | |
4524 | fsf_req = zfcp_fsf_req_alloc(pool, req_flags); | |
4525 | if (unlikely(NULL == fsf_req)) { | |
4526 | ZFCP_LOG_DEBUG("error: Could not put an FSF request into" | |
4527 | "the outbound (send) queue.\n"); | |
4528 | ret = -ENOMEM; | |
4529 | goto failed_fsf_req; | |
4530 | } | |
4531 | ||
8a36e453 MS |
4532 | fsf_req->adapter = adapter; |
4533 | fsf_req->fsf_command = fsf_cmd; | |
4534 | ||
4535 | zfcp_fsf_req_qtcb_init(fsf_req); | |
1da177e4 LT |
4536 | |
4537 | /* initialize waitqueue which may be used to wait on | |
4538 | this request completion */ | |
4539 | init_waitqueue_head(&fsf_req->completion_wq); | |
4540 | ||
4541 | ret = zfcp_fsf_req_sbal_get(adapter, req_flags, lock_flags); | |
4542 | if(ret < 0) { | |
4543 | goto failed_sbals; | |
4544 | } | |
4545 | ||
4546 | /* | |
4547 | * We hold queue_lock here. Check if QDIOUP is set and let request fail | |
4548 | * if it is not set (see also *_open_qdio and *_close_qdio). | |
4549 | */ | |
4550 | ||
4551 | if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status)) { | |
4552 | write_unlock_irqrestore(&req_queue->queue_lock, *lock_flags); | |
4553 | ret = -EIO; | |
4554 | goto failed_sbals; | |
4555 | } | |
4556 | ||
8a36e453 MS |
4557 | if (fsf_req->qtcb) { |
4558 | fsf_req->seq_no = adapter->fsf_req_seq_no; | |
4559 | fsf_req->qtcb->prefix.req_seq_no = adapter->fsf_req_seq_no; | |
4560 | } | |
1da177e4 LT |
4561 | fsf_req->sbal_number = 1; |
4562 | fsf_req->sbal_first = req_queue->free_index; | |
4563 | fsf_req->sbal_curr = req_queue->free_index; | |
4564 | fsf_req->sbale_curr = 1; | |
4565 | ||
4566 | if (likely(req_flags & ZFCP_REQ_AUTO_CLEANUP)) { | |
4567 | fsf_req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; | |
4568 | } | |
4569 | ||
4570 | sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); | |
4571 | ||
4572 | /* setup common SBALE fields */ | |
4573 | sbale[0].addr = fsf_req; | |
4574 | sbale[0].flags |= SBAL_FLAGS0_COMMAND; | |
4575 | if (likely(fsf_req->qtcb != NULL)) { | |
4576 | sbale[1].addr = (void *) fsf_req->qtcb; | |
4577 | sbale[1].length = sizeof(struct fsf_qtcb); | |
4578 | } | |
4579 | ||
4580 | ZFCP_LOG_TRACE("got %i free BUFFERs starting at index %i\n", | |
4581 | fsf_req->sbal_number, fsf_req->sbal_first); | |
4582 | ||
4583 | goto success; | |
4584 | ||
4585 | failed_sbals: | |
4586 | /* dequeue new FSF request previously enqueued */ | |
4587 | zfcp_fsf_req_free(fsf_req); | |
4588 | fsf_req = NULL; | |
4589 | ||
4590 | failed_fsf_req: | |
4591 | write_lock_irqsave(&req_queue->queue_lock, *lock_flags); | |
4592 | success: | |
4593 | *fsf_req_p = fsf_req; | |
4594 | return ret; | |
4595 | } | |
4596 | ||
4597 | /* | |
4598 | * function: zfcp_fsf_req_send | |
4599 | * | |
4600 | * purpose: start transfer of FSF request via QDIO | |
4601 | * | |
4602 | * returns: 0 - request transfer succesfully started | |
4603 | * !0 - start of request transfer failed | |
4604 | */ | |
4605 | static int | |
4606 | zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) | |
4607 | { | |
4608 | struct zfcp_adapter *adapter; | |
4609 | struct zfcp_qdio_queue *req_queue; | |
4610 | volatile struct qdio_buffer_element *sbale; | |
8a36e453 | 4611 | int inc_seq_no; |
1da177e4 LT |
4612 | int new_distance_from_int; |
4613 | unsigned long flags; | |
1da177e4 LT |
4614 | int retval = 0; |
4615 | ||
4616 | adapter = fsf_req->adapter; | |
4617 | req_queue = &adapter->request_queue, | |
4618 | ||
4619 | ||
4620 | /* FIXME(debug): remove it later */ | |
4621 | sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_first, 0); | |
4622 | ZFCP_LOG_DEBUG("SBALE0 flags=0x%x\n", sbale[0].flags); | |
4623 | ZFCP_LOG_TRACE("HEX DUMP OF SBALE1 PAYLOAD:\n"); | |
4624 | ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, (char *) sbale[1].addr, | |
4625 | sbale[1].length); | |
4626 | ||
1da177e4 | 4627 | /* put allocated FSF request at list tail */ |
1db2c9c0 | 4628 | spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); |
1da177e4 | 4629 | list_add_tail(&fsf_req->list, &adapter->fsf_req_list_head); |
1db2c9c0 | 4630 | spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); |
1da177e4 | 4631 | |
8a36e453 MS |
4632 | inc_seq_no = (fsf_req->qtcb != NULL); |
4633 | ||
1da177e4 LT |
4634 | /* figure out expiration time of timeout and start timeout */ |
4635 | if (unlikely(timer)) { | |
4636 | timer->expires += jiffies; | |
4637 | add_timer(timer); | |
4638 | } | |
4639 | ||
4640 | ZFCP_LOG_TRACE("request queue of adapter %s: " | |
4641 | "next free SBAL is %i, %i free SBALs\n", | |
4642 | zfcp_get_busid_by_adapter(adapter), | |
4643 | req_queue->free_index, | |
4644 | atomic_read(&req_queue->free_count)); | |
4645 | ||
4646 | ZFCP_LOG_DEBUG("calling do_QDIO adapter %s, flags=0x%x, queue_no=%i, " | |
4647 | "index_in_queue=%i, count=%i, buffers=%p\n", | |
4648 | zfcp_get_busid_by_adapter(adapter), | |
4649 | QDIO_FLAG_SYNC_OUTPUT, | |
4650 | 0, fsf_req->sbal_first, fsf_req->sbal_number, | |
4651 | &req_queue->buffer[fsf_req->sbal_first]); | |
4652 | ||
4653 | /* | |
4654 | * adjust the number of free SBALs in request queue as well as | |
4655 | * position of first one | |
4656 | */ | |
4657 | atomic_sub(fsf_req->sbal_number, &req_queue->free_count); | |
4658 | ZFCP_LOG_TRACE("free_count=%d\n", atomic_read(&req_queue->free_count)); | |
4659 | req_queue->free_index += fsf_req->sbal_number; /* increase */ | |
4660 | req_queue->free_index %= QDIO_MAX_BUFFERS_PER_Q; /* wrap if needed */ | |
4661 | new_distance_from_int = zfcp_qdio_determine_pci(req_queue, fsf_req); | |
4662 | ||
8a36e453 MS |
4663 | fsf_req->issued = get_clock(); |
4664 | ||
1da177e4 LT |
4665 | retval = do_QDIO(adapter->ccw_device, |
4666 | QDIO_FLAG_SYNC_OUTPUT, | |
4667 | 0, fsf_req->sbal_first, fsf_req->sbal_number, NULL); | |
4668 | ||
4669 | if (unlikely(retval)) { | |
4670 | /* Queues are down..... */ | |
4671 | retval = -EIO; | |
4672 | /* | |
4673 | * FIXME(potential race): | |
4674 | * timer might be expired (absolutely unlikely) | |
4675 | */ | |
4676 | if (timer) | |
4677 | del_timer(timer); | |
1db2c9c0 | 4678 | spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); |
1da177e4 | 4679 | list_del(&fsf_req->list); |
1db2c9c0 | 4680 | spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); |
1da177e4 LT |
4681 | /* |
4682 | * adjust the number of free SBALs in request queue as well as | |
4683 | * position of first one | |
4684 | */ | |
4685 | zfcp_qdio_zero_sbals(req_queue->buffer, | |
4686 | fsf_req->sbal_first, fsf_req->sbal_number); | |
4687 | atomic_add(fsf_req->sbal_number, &req_queue->free_count); | |
4688 | req_queue->free_index -= fsf_req->sbal_number; /* increase */ | |
4689 | req_queue->free_index += QDIO_MAX_BUFFERS_PER_Q; | |
4690 | req_queue->free_index %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */ | |
4691 | ZFCP_LOG_DEBUG | |
4692 | ("error: do_QDIO failed. Buffers could not be enqueued " | |
4693 | "to request queue.\n"); | |
4694 | } else { | |
4695 | req_queue->distance_from_int = new_distance_from_int; | |
4696 | /* | |
4697 | * increase FSF sequence counter - | |
4698 | * this must only be done for request successfully enqueued to | |
4699 | * QDIO this rejected requests may be cleaned up by calling | |
4700 | * routines resulting in missing sequence counter values | |
4701 | * otherwise, | |
4702 | */ | |
8a36e453 | 4703 | |
1da177e4 | 4704 | /* Don't increase for unsolicited status */ |
8a36e453 | 4705 | if (inc_seq_no) |
1da177e4 | 4706 | adapter->fsf_req_seq_no++; |
8a36e453 | 4707 | |
1da177e4 LT |
4708 | /* count FSF requests pending */ |
4709 | atomic_inc(&adapter->fsf_reqs_active); | |
4710 | } | |
4711 | return retval; | |
4712 | } | |
4713 | ||
1da177e4 | 4714 | #undef ZFCP_LOG_AREA |