Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * This file contains work-arounds for many known PCI hardware | |
3 | * bugs. Devices present only on certain architectures (host | |
4 | * bridges et cetera) should be handled in arch-specific code. | |
5 | * | |
6 | * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. | |
7 | * | |
8 | * Copyright (c) 1999 Martin Mares <mj@ucw.cz> | |
9 | * | |
7586269c DB |
10 | * Init/reset quirks for USB host controllers should be in the |
11 | * USB quirks file, where their drivers can access reuse it. | |
12 | * | |
1da177e4 LT |
13 | * The bridge optimization stuff has been removed. If you really |
14 | * have a silly BIOS which is unable to set your host bridge right, | |
15 | * use the PowerTweak utility (see http://powertweak.sourceforge.net). | |
16 | */ | |
17 | ||
1da177e4 LT |
18 | #include <linux/types.h> |
19 | #include <linux/kernel.h> | |
20 | #include <linux/pci.h> | |
21 | #include <linux/init.h> | |
22 | #include <linux/delay.h> | |
25be5e6c | 23 | #include <linux/acpi.h> |
9f23ed3b | 24 | #include <linux/kallsyms.h> |
75e07fc3 | 25 | #include <linux/dmi.h> |
649426ef | 26 | #include <linux/pci-aspm.h> |
bc56b9e0 | 27 | #include "pci.h" |
1da177e4 | 28 | |
3d137310 TP |
29 | int isa_dma_bridge_buggy; |
30 | EXPORT_SYMBOL(isa_dma_bridge_buggy); | |
31 | int pci_pci_problems; | |
32 | EXPORT_SYMBOL(pci_pci_problems); | |
33 | int pcie_mch_quirk; | |
34 | EXPORT_SYMBOL(pcie_mch_quirk); | |
35 | ||
36 | #ifdef CONFIG_PCI_QUIRKS | |
bd8481e1 DT |
37 | /* The Mellanox Tavor device gives false positive parity errors |
38 | * Mark this device with a broken_parity_status, to allow | |
39 | * PCI scanning code to "skip" this now blacklisted device. | |
40 | */ | |
41 | static void __devinit quirk_mellanox_tavor(struct pci_dev *dev) | |
42 | { | |
43 | dev->broken_parity_status = 1; /* This device gives false positives */ | |
44 | } | |
45 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor); | |
46 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor); | |
47 | ||
1da177e4 LT |
48 | /* Deal with broken BIOS'es that neglect to enable passive release, |
49 | which can cause problems in combination with the 82441FX/PPro MTRRs */ | |
1597cacb | 50 | static void quirk_passive_release(struct pci_dev *dev) |
1da177e4 LT |
51 | { |
52 | struct pci_dev *d = NULL; | |
53 | unsigned char dlc; | |
54 | ||
55 | /* We have to make sure a particular bit is set in the PIIX3 | |
56 | ISA bridge, so we have to go out and find it. */ | |
57 | while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { | |
58 | pci_read_config_byte(d, 0x82, &dlc); | |
59 | if (!(dlc & 1<<1)) { | |
999da9fd | 60 | dev_info(&d->dev, "PIIX3: Enabling Passive Release\n"); |
1da177e4 LT |
61 | dlc |= 1<<1; |
62 | pci_write_config_byte(d, 0x82, dlc); | |
63 | } | |
64 | } | |
65 | } | |
652c538e AM |
66 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); |
67 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); | |
1da177e4 LT |
68 | |
69 | /* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround | |
70 | but VIA don't answer queries. If you happen to have good contacts at VIA | |
71 | ask them for me please -- Alan | |
72 | ||
73 | This appears to be BIOS not version dependent. So presumably there is a | |
74 | chipset level fix */ | |
1da177e4 LT |
75 | |
76 | static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev) | |
77 | { | |
78 | if (!isa_dma_bridge_buggy) { | |
79 | isa_dma_bridge_buggy=1; | |
f0fda801 | 80 | dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n"); |
1da177e4 LT |
81 | } |
82 | } | |
83 | /* | |
84 | * Its not totally clear which chipsets are the problematic ones | |
85 | * We know 82C586 and 82C596 variants are affected. | |
86 | */ | |
652c538e AM |
87 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); |
88 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); | |
89 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); | |
90 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); | |
91 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs); | |
92 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs); | |
93 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); | |
1da177e4 | 94 | |
1da177e4 LT |
95 | /* |
96 | * Chipsets where PCI->PCI transfers vanish or hang | |
97 | */ | |
98 | static void __devinit quirk_nopcipci(struct pci_dev *dev) | |
99 | { | |
100 | if ((pci_pci_problems & PCIPCI_FAIL)==0) { | |
f0fda801 | 101 | dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n"); |
1da177e4 LT |
102 | pci_pci_problems |= PCIPCI_FAIL; |
103 | } | |
104 | } | |
652c538e AM |
105 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); |
106 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); | |
236561e5 AC |
107 | |
108 | static void __devinit quirk_nopciamd(struct pci_dev *dev) | |
109 | { | |
110 | u8 rev; | |
111 | pci_read_config_byte(dev, 0x08, &rev); | |
112 | if (rev == 0x13) { | |
113 | /* Erratum 24 */ | |
f0fda801 | 114 | dev_info(&dev->dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n"); |
236561e5 AC |
115 | pci_pci_problems |= PCIAGP_FAIL; |
116 | } | |
117 | } | |
652c538e | 118 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd); |
1da177e4 LT |
119 | |
120 | /* | |
121 | * Triton requires workarounds to be used by the drivers | |
122 | */ | |
123 | static void __devinit quirk_triton(struct pci_dev *dev) | |
124 | { | |
125 | if ((pci_pci_problems&PCIPCI_TRITON)==0) { | |
f0fda801 | 126 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
127 | pci_pci_problems |= PCIPCI_TRITON; |
128 | } | |
129 | } | |
652c538e AM |
130 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); |
131 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); | |
132 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); | |
133 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); | |
1da177e4 LT |
134 | |
135 | /* | |
136 | * VIA Apollo KT133 needs PCI latency patch | |
137 | * Made according to a windows driver based patch by George E. Breese | |
138 | * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm | |
139 | * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for | |
140 | * the info on which Mr Breese based his work. | |
141 | * | |
142 | * Updated based on further information from the site and also on | |
143 | * information provided by VIA | |
144 | */ | |
1597cacb | 145 | static void quirk_vialatency(struct pci_dev *dev) |
1da177e4 LT |
146 | { |
147 | struct pci_dev *p; | |
1da177e4 LT |
148 | u8 busarb; |
149 | /* Ok we have a potential problem chipset here. Now see if we have | |
150 | a buggy southbridge */ | |
151 | ||
152 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); | |
153 | if (p!=NULL) { | |
1da177e4 LT |
154 | /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ |
155 | /* Check for buggy part revisions */ | |
2b1afa87 | 156 | if (p->revision < 0x40 || p->revision > 0x42) |
1da177e4 LT |
157 | goto exit; |
158 | } else { | |
159 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); | |
160 | if (p==NULL) /* No problem parts */ | |
161 | goto exit; | |
1da177e4 | 162 | /* Check for buggy part revisions */ |
2b1afa87 | 163 | if (p->revision < 0x10 || p->revision > 0x12) |
1da177e4 LT |
164 | goto exit; |
165 | } | |
166 | ||
167 | /* | |
168 | * Ok we have the problem. Now set the PCI master grant to | |
169 | * occur every master grant. The apparent bug is that under high | |
170 | * PCI load (quite common in Linux of course) you can get data | |
171 | * loss when the CPU is held off the bus for 3 bus master requests | |
172 | * This happens to include the IDE controllers.... | |
173 | * | |
174 | * VIA only apply this fix when an SB Live! is present but under | |
175 | * both Linux and Windows this isnt enough, and we have seen | |
176 | * corruption without SB Live! but with things like 3 UDMA IDE | |
177 | * controllers. So we ignore that bit of the VIA recommendation.. | |
178 | */ | |
179 | ||
180 | pci_read_config_byte(dev, 0x76, &busarb); | |
181 | /* Set bit 4 and bi 5 of byte 76 to 0x01 | |
182 | "Master priority rotation on every PCI master grant */ | |
183 | busarb &= ~(1<<5); | |
184 | busarb |= (1<<4); | |
185 | pci_write_config_byte(dev, 0x76, busarb); | |
f0fda801 | 186 | dev_info(&dev->dev, "Applying VIA southbridge workaround\n"); |
1da177e4 LT |
187 | exit: |
188 | pci_dev_put(p); | |
189 | } | |
652c538e AM |
190 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); |
191 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); | |
192 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); | |
1597cacb | 193 | /* Must restore this on a resume from RAM */ |
652c538e AM |
194 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); |
195 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); | |
196 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); | |
1da177e4 LT |
197 | |
198 | /* | |
199 | * VIA Apollo VP3 needs ETBF on BT848/878 | |
200 | */ | |
201 | static void __devinit quirk_viaetbf(struct pci_dev *dev) | |
202 | { | |
203 | if ((pci_pci_problems&PCIPCI_VIAETBF)==0) { | |
f0fda801 | 204 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
205 | pci_pci_problems |= PCIPCI_VIAETBF; |
206 | } | |
207 | } | |
652c538e | 208 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); |
1da177e4 LT |
209 | |
210 | static void __devinit quirk_vsfx(struct pci_dev *dev) | |
211 | { | |
212 | if ((pci_pci_problems&PCIPCI_VSFX)==0) { | |
f0fda801 | 213 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
214 | pci_pci_problems |= PCIPCI_VSFX; |
215 | } | |
216 | } | |
652c538e | 217 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx); |
1da177e4 LT |
218 | |
219 | /* | |
220 | * Ali Magik requires workarounds to be used by the drivers | |
221 | * that DMA to AGP space. Latency must be set to 0xA and triton | |
222 | * workaround applied too | |
223 | * [Info kindly provided by ALi] | |
224 | */ | |
225 | static void __init quirk_alimagik(struct pci_dev *dev) | |
226 | { | |
227 | if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) { | |
f0fda801 | 228 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
229 | pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; |
230 | } | |
231 | } | |
652c538e AM |
232 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); |
233 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); | |
1da177e4 LT |
234 | |
235 | /* | |
236 | * Natoma has some interesting boundary conditions with Zoran stuff | |
237 | * at least | |
238 | */ | |
239 | static void __devinit quirk_natoma(struct pci_dev *dev) | |
240 | { | |
241 | if ((pci_pci_problems&PCIPCI_NATOMA)==0) { | |
f0fda801 | 242 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
243 | pci_pci_problems |= PCIPCI_NATOMA; |
244 | } | |
245 | } | |
652c538e AM |
246 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); |
247 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); | |
248 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); | |
249 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); | |
250 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); | |
251 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); | |
1da177e4 LT |
252 | |
253 | /* | |
254 | * This chip can cause PCI parity errors if config register 0xA0 is read | |
255 | * while DMAs are occurring. | |
256 | */ | |
257 | static void __devinit quirk_citrine(struct pci_dev *dev) | |
258 | { | |
259 | dev->cfg_size = 0xA0; | |
260 | } | |
652c538e | 261 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine); |
1da177e4 LT |
262 | |
263 | /* | |
264 | * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. | |
265 | * If it's needed, re-allocate the region. | |
266 | */ | |
267 | static void __devinit quirk_s3_64M(struct pci_dev *dev) | |
268 | { | |
269 | struct resource *r = &dev->resource[0]; | |
270 | ||
271 | if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { | |
272 | r->start = 0; | |
273 | r->end = 0x3ffffff; | |
274 | } | |
275 | } | |
652c538e AM |
276 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); |
277 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); | |
1da177e4 | 278 | |
6693e74a LT |
279 | static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, |
280 | unsigned size, int nr, const char *name) | |
1da177e4 LT |
281 | { |
282 | region &= ~(size-1); | |
283 | if (region) { | |
085ae41f | 284 | struct pci_bus_region bus_region; |
1da177e4 LT |
285 | struct resource *res = dev->resource + nr; |
286 | ||
287 | res->name = pci_name(dev); | |
288 | res->start = region; | |
289 | res->end = region + size - 1; | |
290 | res->flags = IORESOURCE_IO; | |
085ae41f DM |
291 | |
292 | /* Convert from PCI bus to resource space. */ | |
293 | bus_region.start = res->start; | |
294 | bus_region.end = res->end; | |
295 | pcibios_bus_to_resource(dev, res, &bus_region); | |
296 | ||
1da177e4 | 297 | pci_claim_resource(dev, nr); |
f0fda801 | 298 | dev_info(&dev->dev, "quirk: region %04x-%04x claimed by %s\n", region, region + size - 1, name); |
1da177e4 LT |
299 | } |
300 | } | |
301 | ||
302 | /* | |
303 | * ATI Northbridge setups MCE the processor if you even | |
304 | * read somewhere between 0x3b0->0x3bb or read 0x3d3 | |
305 | */ | |
306 | static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev) | |
307 | { | |
f0fda801 | 308 | dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); |
1da177e4 LT |
309 | /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ |
310 | request_region(0x3b0, 0x0C, "RadeonIGP"); | |
311 | request_region(0x3d3, 0x01, "RadeonIGP"); | |
312 | } | |
652c538e | 313 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce); |
1da177e4 LT |
314 | |
315 | /* | |
316 | * Let's make the southbridge information explicit instead | |
317 | * of having to worry about people probing the ACPI areas, | |
318 | * for example.. (Yes, it happens, and if you read the wrong | |
319 | * ACPI register it will put the machine to sleep with no | |
320 | * way of waking it up again. Bummer). | |
321 | * | |
322 | * ALI M7101: Two IO regions pointed to by words at | |
323 | * 0xE0 (64 bytes of ACPI registers) | |
324 | * 0xE2 (32 bytes of SMB registers) | |
325 | */ | |
326 | static void __devinit quirk_ali7101_acpi(struct pci_dev *dev) | |
327 | { | |
328 | u16 region; | |
329 | ||
330 | pci_read_config_word(dev, 0xE0, ®ion); | |
6693e74a | 331 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); |
1da177e4 | 332 | pci_read_config_word(dev, 0xE2, ®ion); |
6693e74a | 333 | quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); |
1da177e4 | 334 | } |
652c538e | 335 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi); |
1da177e4 | 336 | |
6693e74a LT |
337 | static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) |
338 | { | |
339 | u32 devres; | |
340 | u32 mask, size, base; | |
341 | ||
342 | pci_read_config_dword(dev, port, &devres); | |
343 | if ((devres & enable) != enable) | |
344 | return; | |
345 | mask = (devres >> 16) & 15; | |
346 | base = devres & 0xffff; | |
347 | size = 16; | |
348 | for (;;) { | |
349 | unsigned bit = size >> 1; | |
350 | if ((bit & mask) == bit) | |
351 | break; | |
352 | size = bit; | |
353 | } | |
354 | /* | |
355 | * For now we only print it out. Eventually we'll want to | |
356 | * reserve it (at least if it's in the 0x1000+ range), but | |
357 | * let's get enough confirmation reports first. | |
358 | */ | |
359 | base &= -size; | |
f0fda801 | 360 | dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base + size - 1); |
6693e74a LT |
361 | } |
362 | ||
363 | static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) | |
364 | { | |
365 | u32 devres; | |
366 | u32 mask, size, base; | |
367 | ||
368 | pci_read_config_dword(dev, port, &devres); | |
369 | if ((devres & enable) != enable) | |
370 | return; | |
371 | base = devres & 0xffff0000; | |
372 | mask = (devres & 0x3f) << 16; | |
373 | size = 128 << 16; | |
374 | for (;;) { | |
375 | unsigned bit = size >> 1; | |
376 | if ((bit & mask) == bit) | |
377 | break; | |
378 | size = bit; | |
379 | } | |
380 | /* | |
381 | * For now we only print it out. Eventually we'll want to | |
382 | * reserve it, but let's get enough confirmation reports first. | |
383 | */ | |
384 | base &= -size; | |
f0fda801 | 385 | dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, base + size - 1); |
6693e74a LT |
386 | } |
387 | ||
1da177e4 LT |
388 | /* |
389 | * PIIX4 ACPI: Two IO regions pointed to by longwords at | |
390 | * 0x40 (64 bytes of ACPI registers) | |
08db2a70 | 391 | * 0x90 (16 bytes of SMB registers) |
6693e74a | 392 | * and a few strange programmable PIIX4 device resources. |
1da177e4 LT |
393 | */ |
394 | static void __devinit quirk_piix4_acpi(struct pci_dev *dev) | |
395 | { | |
6693e74a | 396 | u32 region, res_a; |
1da177e4 LT |
397 | |
398 | pci_read_config_dword(dev, 0x40, ®ion); | |
6693e74a | 399 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); |
1da177e4 | 400 | pci_read_config_dword(dev, 0x90, ®ion); |
08db2a70 | 401 | quirk_io_region(dev, region, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); |
6693e74a LT |
402 | |
403 | /* Device resource A has enables for some of the other ones */ | |
404 | pci_read_config_dword(dev, 0x5c, &res_a); | |
405 | ||
406 | piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); | |
407 | piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); | |
408 | ||
409 | /* Device resource D is just bitfields for static resources */ | |
410 | ||
411 | /* Device 12 enabled? */ | |
412 | if (res_a & (1 << 29)) { | |
413 | piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); | |
414 | piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); | |
415 | } | |
416 | /* Device 13 enabled? */ | |
417 | if (res_a & (1 << 30)) { | |
418 | piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); | |
419 | piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); | |
420 | } | |
421 | piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); | |
422 | piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); | |
1da177e4 | 423 | } |
652c538e AM |
424 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi); |
425 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi); | |
1da177e4 LT |
426 | |
427 | /* | |
428 | * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at | |
429 | * 0x40 (128 bytes of ACPI, GPIO & TCO registers) | |
430 | * 0x58 (64 bytes of GPIO I/O space) | |
431 | */ | |
432 | static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev) | |
433 | { | |
434 | u32 region; | |
435 | ||
436 | pci_read_config_dword(dev, 0x40, ®ion); | |
6693e74a | 437 | quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO"); |
1da177e4 LT |
438 | |
439 | pci_read_config_dword(dev, 0x58, ®ion); | |
6693e74a | 440 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO"); |
1da177e4 | 441 | } |
652c538e AM |
442 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi); |
443 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi); | |
444 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi); | |
445 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi); | |
446 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi); | |
447 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi); | |
448 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi); | |
449 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi); | |
450 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); | |
451 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); | |
1da177e4 | 452 | |
894886e5 | 453 | static void __devinit ich6_lpc_acpi_gpio(struct pci_dev *dev) |
2cea752f RM |
454 | { |
455 | u32 region; | |
456 | ||
457 | pci_read_config_dword(dev, 0x40, ®ion); | |
458 | quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH6 ACPI/GPIO/TCO"); | |
459 | ||
460 | pci_read_config_dword(dev, 0x48, ®ion); | |
461 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO"); | |
462 | } | |
894886e5 LT |
463 | |
464 | static void __devinit ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) | |
465 | { | |
466 | u32 val; | |
467 | u32 size, base; | |
468 | ||
469 | pci_read_config_dword(dev, reg, &val); | |
470 | ||
471 | /* Enabled? */ | |
472 | if (!(val & 1)) | |
473 | return; | |
474 | base = val & 0xfffc; | |
475 | if (dynsize) { | |
476 | /* | |
477 | * This is not correct. It is 16, 32 or 64 bytes depending on | |
478 | * register D31:F0:ADh bits 5:4. | |
479 | * | |
480 | * But this gets us at least _part_ of it. | |
481 | */ | |
482 | size = 16; | |
483 | } else { | |
484 | size = 128; | |
485 | } | |
486 | base &= ~(size-1); | |
487 | ||
488 | /* Just print it out for now. We should reserve it after more debugging */ | |
489 | dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); | |
490 | } | |
491 | ||
492 | static void __devinit quirk_ich6_lpc(struct pci_dev *dev) | |
493 | { | |
494 | /* Shared ACPI/GPIO decode with all ICH6+ */ | |
495 | ich6_lpc_acpi_gpio(dev); | |
496 | ||
497 | /* ICH6-specific generic IO decode */ | |
498 | ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0); | |
499 | ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1); | |
500 | } | |
501 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); | |
502 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); | |
503 | ||
504 | static void __devinit ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) | |
505 | { | |
506 | u32 val; | |
507 | u32 mask, base; | |
508 | ||
509 | pci_read_config_dword(dev, reg, &val); | |
510 | ||
511 | /* Enabled? */ | |
512 | if (!(val & 1)) | |
513 | return; | |
514 | ||
515 | /* | |
516 | * IO base in bits 15:2, mask in bits 23:18, both | |
517 | * are dword-based | |
518 | */ | |
519 | base = val & 0xfffc; | |
520 | mask = (val >> 16) & 0xfc; | |
521 | mask |= 3; | |
522 | ||
523 | /* Just print it out for now. We should reserve it after more debugging */ | |
524 | dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); | |
525 | } | |
526 | ||
527 | /* ICH7-10 has the same common LPC generic IO decode registers */ | |
528 | static void __devinit quirk_ich7_lpc(struct pci_dev *dev) | |
529 | { | |
530 | /* We share the common ACPI/DPIO decode with ICH6 */ | |
531 | ich6_lpc_acpi_gpio(dev); | |
532 | ||
533 | /* And have 4 ICH7+ generic decodes */ | |
534 | ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1"); | |
535 | ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2"); | |
536 | ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3"); | |
537 | ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4"); | |
538 | } | |
539 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc); | |
540 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc); | |
541 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc); | |
542 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc); | |
543 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc); | |
544 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc); | |
545 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc); | |
546 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc); | |
547 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc); | |
548 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc); | |
549 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc); | |
550 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc); | |
551 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc); | |
2cea752f | 552 | |
1da177e4 LT |
553 | /* |
554 | * VIA ACPI: One IO region pointed to by longword at | |
555 | * 0x48 or 0x20 (256 bytes of ACPI registers) | |
556 | */ | |
557 | static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev) | |
558 | { | |
1da177e4 LT |
559 | u32 region; |
560 | ||
651472fb | 561 | if (dev->revision & 0x10) { |
1da177e4 LT |
562 | pci_read_config_dword(dev, 0x48, ®ion); |
563 | region &= PCI_BASE_ADDRESS_IO_MASK; | |
6693e74a | 564 | quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI"); |
1da177e4 LT |
565 | } |
566 | } | |
652c538e | 567 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi); |
1da177e4 LT |
568 | |
569 | /* | |
570 | * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at | |
571 | * 0x48 (256 bytes of ACPI registers) | |
572 | * 0x70 (128 bytes of hardware monitoring register) | |
573 | * 0x90 (16 bytes of SMB registers) | |
574 | */ | |
575 | static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev) | |
576 | { | |
577 | u16 hm; | |
578 | u32 smb; | |
579 | ||
580 | quirk_vt82c586_acpi(dev); | |
581 | ||
582 | pci_read_config_word(dev, 0x70, &hm); | |
583 | hm &= PCI_BASE_ADDRESS_IO_MASK; | |
02f313b2 | 584 | quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c686 HW-mon"); |
1da177e4 LT |
585 | |
586 | pci_read_config_dword(dev, 0x90, &smb); | |
587 | smb &= PCI_BASE_ADDRESS_IO_MASK; | |
02f313b2 | 588 | quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c686 SMB"); |
1da177e4 | 589 | } |
652c538e | 590 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi); |
1da177e4 | 591 | |
6d85f29b IK |
592 | /* |
593 | * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at | |
594 | * 0x88 (128 bytes of power management registers) | |
595 | * 0xd0 (16 bytes of SMB registers) | |
596 | */ | |
597 | static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) | |
598 | { | |
599 | u16 pm, smb; | |
600 | ||
601 | pci_read_config_word(dev, 0x88, &pm); | |
602 | pm &= PCI_BASE_ADDRESS_IO_MASK; | |
6693e74a | 603 | quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); |
6d85f29b IK |
604 | |
605 | pci_read_config_word(dev, 0xd0, &smb); | |
606 | smb &= PCI_BASE_ADDRESS_IO_MASK; | |
6693e74a | 607 | quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB"); |
6d85f29b IK |
608 | } |
609 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); | |
610 | ||
1da177e4 LT |
611 | |
612 | #ifdef CONFIG_X86_IO_APIC | |
613 | ||
614 | #include <asm/io_apic.h> | |
615 | ||
616 | /* | |
617 | * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip | |
618 | * devices to the external APIC. | |
619 | * | |
620 | * TODO: When we have device-specific interrupt routers, | |
621 | * this code will go away from quirks. | |
622 | */ | |
1597cacb | 623 | static void quirk_via_ioapic(struct pci_dev *dev) |
1da177e4 LT |
624 | { |
625 | u8 tmp; | |
626 | ||
627 | if (nr_ioapics < 1) | |
628 | tmp = 0; /* nothing routed to external APIC */ | |
629 | else | |
630 | tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ | |
631 | ||
f0fda801 | 632 | dev_info(&dev->dev, "%sbling VIA external APIC routing\n", |
1da177e4 LT |
633 | tmp == 0 ? "Disa" : "Ena"); |
634 | ||
635 | /* Offset 0x58: External APIC IRQ output control */ | |
636 | pci_write_config_byte (dev, 0x58, tmp); | |
637 | } | |
652c538e | 638 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); |
e1a2a51e | 639 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); |
1da177e4 | 640 | |
a1740913 KW |
641 | /* |
642 | * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit. | |
643 | * This leads to doubled level interrupt rates. | |
644 | * Set this bit to get rid of cycle wastage. | |
645 | * Otherwise uncritical. | |
646 | */ | |
1597cacb | 647 | static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) |
a1740913 KW |
648 | { |
649 | u8 misc_control2; | |
650 | #define BYPASS_APIC_DEASSERT 8 | |
651 | ||
652 | pci_read_config_byte(dev, 0x5B, &misc_control2); | |
653 | if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { | |
f0fda801 | 654 | dev_info(&dev->dev, "Bypassing VIA 8237 APIC De-Assert Message\n"); |
a1740913 KW |
655 | pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); |
656 | } | |
657 | } | |
658 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); | |
e1a2a51e | 659 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); |
a1740913 | 660 | |
1da177e4 LT |
661 | /* |
662 | * The AMD io apic can hang the box when an apic irq is masked. | |
663 | * We check all revs >= B0 (yet not in the pre production!) as the bug | |
664 | * is currently marked NoFix | |
665 | * | |
666 | * We have multiple reports of hangs with this chipset that went away with | |
236561e5 | 667 | * noapic specified. For the moment we assume it's the erratum. We may be wrong |
1da177e4 LT |
668 | * of course. However the advice is demonstrably good even if so.. |
669 | */ | |
670 | static void __devinit quirk_amd_ioapic(struct pci_dev *dev) | |
671 | { | |
44c10138 | 672 | if (dev->revision >= 0x02) { |
f0fda801 | 673 | dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); |
674 | dev_warn(&dev->dev, " : booting with the \"noapic\" option\n"); | |
1da177e4 LT |
675 | } |
676 | } | |
652c538e | 677 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); |
1da177e4 LT |
678 | |
679 | static void __init quirk_ioapic_rmw(struct pci_dev *dev) | |
680 | { | |
681 | if (dev->devfn == 0 && dev->bus->number == 0) | |
682 | sis_apic_bug = 1; | |
683 | } | |
652c538e | 684 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw); |
1da177e4 LT |
685 | #endif /* CONFIG_X86_IO_APIC */ |
686 | ||
d556ad4b PO |
687 | /* |
688 | * Some settings of MMRBC can lead to data corruption so block changes. | |
689 | * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide | |
690 | */ | |
691 | static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev) | |
692 | { | |
aa288d4d | 693 | if (dev->subordinate && dev->revision <= 0x12) { |
f0fda801 | 694 | dev_info(&dev->dev, "AMD8131 rev %x detected; " |
695 | "disabling PCI-X MMRBC\n", dev->revision); | |
d556ad4b PO |
696 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; |
697 | } | |
698 | } | |
699 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); | |
1da177e4 | 700 | |
1da177e4 LT |
701 | /* |
702 | * FIXME: it is questionable that quirk_via_acpi | |
703 | * is needed. It shows up as an ISA bridge, and does not | |
704 | * support the PCI_INTERRUPT_LINE register at all. Therefore | |
705 | * it seems like setting the pci_dev's 'irq' to the | |
706 | * value of the ACPI SCI interrupt is only done for convenience. | |
707 | * -jgarzik | |
708 | */ | |
709 | static void __devinit quirk_via_acpi(struct pci_dev *d) | |
710 | { | |
711 | /* | |
712 | * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 | |
713 | */ | |
714 | u8 irq; | |
715 | pci_read_config_byte(d, 0x42, &irq); | |
716 | irq &= 0xf; | |
717 | if (irq && (irq != 2)) | |
718 | d->irq = irq; | |
719 | } | |
652c538e AM |
720 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi); |
721 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi); | |
1da177e4 | 722 | |
09d6029f DD |
723 | |
724 | /* | |
1597cacb | 725 | * VIA bridges which have VLink |
09d6029f | 726 | */ |
1597cacb | 727 | |
c06bb5d4 JD |
728 | static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18; |
729 | ||
730 | static void quirk_via_bridge(struct pci_dev *dev) | |
731 | { | |
732 | /* See what bridge we have and find the device ranges */ | |
733 | switch (dev->device) { | |
734 | case PCI_DEVICE_ID_VIA_82C686: | |
cb7468ef JD |
735 | /* The VT82C686 is special, it attaches to PCI and can have |
736 | any device number. All its subdevices are functions of | |
737 | that single device. */ | |
738 | via_vlink_dev_lo = PCI_SLOT(dev->devfn); | |
739 | via_vlink_dev_hi = PCI_SLOT(dev->devfn); | |
c06bb5d4 JD |
740 | break; |
741 | case PCI_DEVICE_ID_VIA_8237: | |
742 | case PCI_DEVICE_ID_VIA_8237A: | |
743 | via_vlink_dev_lo = 15; | |
744 | break; | |
745 | case PCI_DEVICE_ID_VIA_8235: | |
746 | via_vlink_dev_lo = 16; | |
747 | break; | |
748 | case PCI_DEVICE_ID_VIA_8231: | |
749 | case PCI_DEVICE_ID_VIA_8233_0: | |
750 | case PCI_DEVICE_ID_VIA_8233A: | |
751 | case PCI_DEVICE_ID_VIA_8233C_0: | |
752 | via_vlink_dev_lo = 17; | |
753 | break; | |
754 | } | |
755 | } | |
756 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge); | |
757 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge); | |
758 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge); | |
759 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge); | |
760 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge); | |
761 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge); | |
762 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge); | |
763 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge); | |
09d6029f | 764 | |
1597cacb AC |
765 | /** |
766 | * quirk_via_vlink - VIA VLink IRQ number update | |
767 | * @dev: PCI device | |
768 | * | |
769 | * If the device we are dealing with is on a PIC IRQ we need to | |
770 | * ensure that the IRQ line register which usually is not relevant | |
771 | * for PCI cards, is actually written so that interrupts get sent | |
c06bb5d4 JD |
772 | * to the right place. |
773 | * We only do this on systems where a VIA south bridge was detected, | |
774 | * and only for VIA devices on the motherboard (see quirk_via_bridge | |
775 | * above). | |
1597cacb AC |
776 | */ |
777 | ||
778 | static void quirk_via_vlink(struct pci_dev *dev) | |
25be5e6c LB |
779 | { |
780 | u8 irq, new_irq; | |
781 | ||
c06bb5d4 JD |
782 | /* Check if we have VLink at all */ |
783 | if (via_vlink_dev_lo == -1) | |
09d6029f DD |
784 | return; |
785 | ||
786 | new_irq = dev->irq; | |
787 | ||
788 | /* Don't quirk interrupts outside the legacy IRQ range */ | |
789 | if (!new_irq || new_irq > 15) | |
790 | return; | |
791 | ||
1597cacb | 792 | /* Internal device ? */ |
c06bb5d4 JD |
793 | if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi || |
794 | PCI_SLOT(dev->devfn) < via_vlink_dev_lo) | |
1597cacb AC |
795 | return; |
796 | ||
797 | /* This is an internal VLink device on a PIC interrupt. The BIOS | |
798 | ought to have set this but may not have, so we redo it */ | |
799 | ||
25be5e6c LB |
800 | pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); |
801 | if (new_irq != irq) { | |
f0fda801 | 802 | dev_info(&dev->dev, "VIA VLink IRQ fixup, from %d to %d\n", |
803 | irq, new_irq); | |
25be5e6c LB |
804 | udelay(15); /* unknown if delay really needed */ |
805 | pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); | |
806 | } | |
807 | } | |
1597cacb | 808 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); |
25be5e6c | 809 | |
1da177e4 LT |
810 | /* |
811 | * VIA VT82C598 has its device ID settable and many BIOSes | |
812 | * set it to the ID of VT82C597 for backward compatibility. | |
813 | * We need to switch it off to be able to recognize the real | |
814 | * type of the chip. | |
815 | */ | |
816 | static void __devinit quirk_vt82c598_id(struct pci_dev *dev) | |
817 | { | |
818 | pci_write_config_byte(dev, 0xfc, 0); | |
819 | pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); | |
820 | } | |
652c538e | 821 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id); |
1da177e4 LT |
822 | |
823 | /* | |
824 | * CardBus controllers have a legacy base address that enables them | |
825 | * to respond as i82365 pcmcia controllers. We don't want them to | |
826 | * do this even if the Linux CardBus driver is not loaded, because | |
827 | * the Linux i82365 driver does not (and should not) handle CardBus. | |
828 | */ | |
1597cacb | 829 | static void quirk_cardbus_legacy(struct pci_dev *dev) |
1da177e4 LT |
830 | { |
831 | if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class) | |
832 | return; | |
833 | pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); | |
834 | } | |
835 | DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); | |
e1a2a51e | 836 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); |
1da177e4 LT |
837 | |
838 | /* | |
839 | * Following the PCI ordering rules is optional on the AMD762. I'm not | |
840 | * sure what the designers were smoking but let's not inhale... | |
841 | * | |
842 | * To be fair to AMD, it follows the spec by default, its BIOS people | |
843 | * who turn it off! | |
844 | */ | |
1597cacb | 845 | static void quirk_amd_ordering(struct pci_dev *dev) |
1da177e4 LT |
846 | { |
847 | u32 pcic; | |
848 | pci_read_config_dword(dev, 0x4C, &pcic); | |
849 | if ((pcic&6)!=6) { | |
850 | pcic |= 6; | |
f0fda801 | 851 | dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n"); |
1da177e4 LT |
852 | pci_write_config_dword(dev, 0x4C, pcic); |
853 | pci_read_config_dword(dev, 0x84, &pcic); | |
854 | pcic |= (1<<23); /* Required in this mode */ | |
855 | pci_write_config_dword(dev, 0x84, pcic); | |
856 | } | |
857 | } | |
652c538e | 858 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); |
e1a2a51e | 859 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); |
1da177e4 LT |
860 | |
861 | /* | |
862 | * DreamWorks provided workaround for Dunord I-3000 problem | |
863 | * | |
864 | * This card decodes and responds to addresses not apparently | |
865 | * assigned to it. We force a larger allocation to ensure that | |
866 | * nothing gets put too close to it. | |
867 | */ | |
868 | static void __devinit quirk_dunord ( struct pci_dev * dev ) | |
869 | { | |
870 | struct resource *r = &dev->resource [1]; | |
871 | r->start = 0; | |
872 | r->end = 0xffffff; | |
873 | } | |
652c538e | 874 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord); |
1da177e4 LT |
875 | |
876 | /* | |
877 | * i82380FB mobile docking controller: its PCI-to-PCI bridge | |
878 | * is subtractive decoding (transparent), and does indicate this | |
879 | * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 | |
880 | * instead of 0x01. | |
881 | */ | |
882 | static void __devinit quirk_transparent_bridge(struct pci_dev *dev) | |
883 | { | |
884 | dev->transparent = 1; | |
885 | } | |
652c538e AM |
886 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); |
887 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); | |
1da177e4 LT |
888 | |
889 | /* | |
890 | * Common misconfiguration of the MediaGX/Geode PCI master that will | |
891 | * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 | |
892 | * datasheets found at http://www.national.com/ds/GX for info on what | |
893 | * these bits do. <christer@weinigel.se> | |
894 | */ | |
1597cacb | 895 | static void quirk_mediagx_master(struct pci_dev *dev) |
1da177e4 LT |
896 | { |
897 | u8 reg; | |
898 | pci_read_config_byte(dev, 0x41, ®); | |
899 | if (reg & 2) { | |
900 | reg &= ~2; | |
f0fda801 | 901 | dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", reg); |
1da177e4 LT |
902 | pci_write_config_byte(dev, 0x41, reg); |
903 | } | |
904 | } | |
652c538e AM |
905 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); |
906 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); | |
1da177e4 | 907 | |
1da177e4 LT |
908 | /* |
909 | * Ensure C0 rev restreaming is off. This is normally done by | |
910 | * the BIOS but in the odd case it is not the results are corruption | |
911 | * hence the presence of a Linux check | |
912 | */ | |
1597cacb | 913 | static void quirk_disable_pxb(struct pci_dev *pdev) |
1da177e4 LT |
914 | { |
915 | u16 config; | |
1da177e4 | 916 | |
44c10138 | 917 | if (pdev->revision != 0x04) /* Only C0 requires this */ |
1da177e4 LT |
918 | return; |
919 | pci_read_config_word(pdev, 0x40, &config); | |
920 | if (config & (1<<6)) { | |
921 | config &= ~(1<<6); | |
922 | pci_write_config_word(pdev, 0x40, config); | |
f0fda801 | 923 | dev_info(&pdev->dev, "C0 revision 450NX. Disabling PCI restreaming\n"); |
1da177e4 LT |
924 | } |
925 | } | |
652c538e | 926 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); |
e1a2a51e | 927 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); |
1da177e4 | 928 | |
05a7d22b | 929 | static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev) |
ab17443a | 930 | { |
05a7d22b CC |
931 | /* set sb600/sb700/sb800 sata to ahci mode */ |
932 | u8 tmp; | |
ab17443a | 933 | |
05a7d22b CC |
934 | pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); |
935 | if (tmp == 0x01) { | |
ab17443a CH |
936 | pci_read_config_byte(pdev, 0x40, &tmp); |
937 | pci_write_config_byte(pdev, 0x40, tmp|1); | |
938 | pci_write_config_byte(pdev, 0x9, 1); | |
939 | pci_write_config_byte(pdev, 0xa, 6); | |
940 | pci_write_config_byte(pdev, 0x40, tmp); | |
941 | ||
c9f89475 | 942 | pdev->class = PCI_CLASS_STORAGE_SATA_AHCI; |
05a7d22b | 943 | dev_info(&pdev->dev, "set SATA to AHCI mode\n"); |
ab17443a CH |
944 | } |
945 | } | |
05a7d22b | 946 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); |
e1a2a51e | 947 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); |
05a7d22b | 948 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); |
e1a2a51e | 949 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); |
ab17443a | 950 | |
1da177e4 LT |
951 | /* |
952 | * Serverworks CSB5 IDE does not fully support native mode | |
953 | */ | |
954 | static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) | |
955 | { | |
956 | u8 prog; | |
957 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
958 | if (prog & 5) { | |
959 | prog &= ~5; | |
960 | pdev->class &= ~5; | |
961 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); | |
368c73d4 | 962 | /* PCI layer will sort out resources */ |
1da177e4 LT |
963 | } |
964 | } | |
652c538e | 965 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide); |
1da177e4 LT |
966 | |
967 | /* | |
968 | * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same | |
969 | */ | |
970 | static void __init quirk_ide_samemode(struct pci_dev *pdev) | |
971 | { | |
972 | u8 prog; | |
973 | ||
974 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
975 | ||
976 | if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { | |
f0fda801 | 977 | dev_info(&pdev->dev, "IDE mode mismatch; forcing legacy mode\n"); |
1da177e4 LT |
978 | prog &= ~5; |
979 | pdev->class &= ~5; | |
980 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); | |
1da177e4 LT |
981 | } |
982 | } | |
368c73d4 | 983 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); |
1da177e4 | 984 | |
979b1791 AC |
985 | /* |
986 | * Some ATA devices break if put into D3 | |
987 | */ | |
988 | ||
989 | static void __devinit quirk_no_ata_d3(struct pci_dev *pdev) | |
990 | { | |
991 | /* Quirk the legacy ATA devices only. The AHCI ones are ok */ | |
992 | if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) | |
993 | pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; | |
994 | } | |
995 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3); | |
996 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3); | |
997 | ||
1da177e4 LT |
998 | /* This was originally an Alpha specific thing, but it really fits here. |
999 | * The i82375 PCI/EISA bridge appears as non-classified. Fix that. | |
1000 | */ | |
1001 | static void __init quirk_eisa_bridge(struct pci_dev *dev) | |
1002 | { | |
1003 | dev->class = PCI_CLASS_BRIDGE_EISA << 8; | |
1004 | } | |
652c538e | 1005 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge); |
1da177e4 | 1006 | |
7daa0c4f | 1007 | |
1da177e4 LT |
1008 | /* |
1009 | * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge | |
1010 | * is not activated. The myth is that Asus said that they do not want the | |
1011 | * users to be irritated by just another PCI Device in the Win98 device | |
1012 | * manager. (see the file prog/hotplug/README.p4b in the lm_sensors | |
1013 | * package 2.7.0 for details) | |
1014 | * | |
1015 | * The SMBus PCI Device can be activated by setting a bit in the ICH LPC | |
1016 | * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it | |
d7698edc | 1017 | * becomes necessary to do this tweak in two steps -- the chosen trigger |
1018 | * is either the Host bridge (preferred) or on-board VGA controller. | |
9208ee82 JD |
1019 | * |
1020 | * Note that we used to unhide the SMBus that way on Toshiba laptops | |
1021 | * (Satellite A40 and Tecra M2) but then found that the thermal management | |
1022 | * was done by SMM code, which could cause unsynchronized concurrent | |
1023 | * accesses to the SMBus registers, with potentially bad effects. Thus you | |
1024 | * should be very careful when adding new entries: if SMM is accessing the | |
1025 | * Intel SMBus, this is a very good reason to leave it hidden. | |
a99acc83 JD |
1026 | * |
1027 | * Likewise, many recent laptops use ACPI for thermal management. If the | |
1028 | * ACPI DSDT code accesses the SMBus, then Linux should not access it | |
1029 | * natively, and keeping the SMBus hidden is the right thing to do. If you | |
1030 | * are about to add an entry in the table below, please first disassemble | |
1031 | * the DSDT and double-check that there is no code accessing the SMBus. | |
1da177e4 | 1032 | */ |
9d24a81e | 1033 | static int asus_hides_smbus; |
1da177e4 LT |
1034 | |
1035 | static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) | |
1036 | { | |
1037 | if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { | |
1038 | if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) | |
1039 | switch(dev->subsystem_device) { | |
a00db371 | 1040 | case 0x8025: /* P4B-LX */ |
1da177e4 LT |
1041 | case 0x8070: /* P4B */ |
1042 | case 0x8088: /* P4B533 */ | |
1043 | case 0x1626: /* L3C notebook */ | |
1044 | asus_hides_smbus = 1; | |
1045 | } | |
2f2d39d2 | 1046 | else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) |
1da177e4 LT |
1047 | switch(dev->subsystem_device) { |
1048 | case 0x80b1: /* P4GE-V */ | |
1049 | case 0x80b2: /* P4PE */ | |
1050 | case 0x8093: /* P4B533-V */ | |
1051 | asus_hides_smbus = 1; | |
1052 | } | |
2f2d39d2 | 1053 | else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) |
1da177e4 LT |
1054 | switch(dev->subsystem_device) { |
1055 | case 0x8030: /* P4T533 */ | |
1056 | asus_hides_smbus = 1; | |
1057 | } | |
2f2d39d2 | 1058 | else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) |
1da177e4 LT |
1059 | switch (dev->subsystem_device) { |
1060 | case 0x8070: /* P4G8X Deluxe */ | |
1061 | asus_hides_smbus = 1; | |
1062 | } | |
2f2d39d2 | 1063 | else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH) |
321311af JD |
1064 | switch (dev->subsystem_device) { |
1065 | case 0x80c9: /* PU-DLS */ | |
1066 | asus_hides_smbus = 1; | |
1067 | } | |
2f2d39d2 | 1068 | else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) |
1da177e4 LT |
1069 | switch (dev->subsystem_device) { |
1070 | case 0x1751: /* M2N notebook */ | |
1071 | case 0x1821: /* M5N notebook */ | |
1072 | asus_hides_smbus = 1; | |
1073 | } | |
2f2d39d2 | 1074 | else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
1da177e4 LT |
1075 | switch (dev->subsystem_device) { |
1076 | case 0x184b: /* W1N notebook */ | |
1077 | case 0x186a: /* M6Ne notebook */ | |
1078 | asus_hides_smbus = 1; | |
1079 | } | |
2f2d39d2 | 1080 | else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) |
2e45785c JD |
1081 | switch (dev->subsystem_device) { |
1082 | case 0x80f2: /* P4P800-X */ | |
1083 | asus_hides_smbus = 1; | |
1084 | } | |
2f2d39d2 | 1085 | else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) |
acc06632 RM |
1086 | switch (dev->subsystem_device) { |
1087 | case 0x1882: /* M6V notebook */ | |
2d1e1c75 | 1088 | case 0x1977: /* A6VA notebook */ |
acc06632 RM |
1089 | asus_hides_smbus = 1; |
1090 | } | |
1da177e4 LT |
1091 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { |
1092 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
1093 | switch(dev->subsystem_device) { | |
1094 | case 0x088C: /* HP Compaq nc8000 */ | |
1095 | case 0x0890: /* HP Compaq nc6000 */ | |
1096 | asus_hides_smbus = 1; | |
1097 | } | |
2f2d39d2 | 1098 | else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) |
1da177e4 LT |
1099 | switch (dev->subsystem_device) { |
1100 | case 0x12bc: /* HP D330L */ | |
e3b1bd57 | 1101 | case 0x12bd: /* HP D530 */ |
1da177e4 LT |
1102 | asus_hides_smbus = 1; |
1103 | } | |
677cc644 JD |
1104 | else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) |
1105 | switch (dev->subsystem_device) { | |
1106 | case 0x12bf: /* HP xw4100 */ | |
1107 | asus_hides_smbus = 1; | |
1108 | } | |
1da177e4 LT |
1109 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { |
1110 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
1111 | switch(dev->subsystem_device) { | |
1112 | case 0xC00C: /* Samsung P35 notebook */ | |
1113 | asus_hides_smbus = 1; | |
1114 | } | |
c87f883e RIZ |
1115 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { |
1116 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
1117 | switch(dev->subsystem_device) { | |
1118 | case 0x0058: /* Compaq Evo N620c */ | |
1119 | asus_hides_smbus = 1; | |
1120 | } | |
d7698edc | 1121 | else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) |
1122 | switch(dev->subsystem_device) { | |
1123 | case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ | |
1124 | /* Motherboard doesn't have Host bridge | |
1125 | * subvendor/subdevice IDs, therefore checking | |
1126 | * its on-board VGA controller */ | |
1127 | asus_hides_smbus = 1; | |
1128 | } | |
10260d9a JD |
1129 | else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_IG) |
1130 | switch(dev->subsystem_device) { | |
1131 | case 0x00b8: /* Compaq Evo D510 CMT */ | |
1132 | case 0x00b9: /* Compaq Evo D510 SFF */ | |
1133 | asus_hides_smbus = 1; | |
1134 | } | |
27e46859 KH |
1135 | else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) |
1136 | switch (dev->subsystem_device) { | |
1137 | case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ | |
1138 | /* Motherboard doesn't have host bridge | |
1139 | * subvendor/subdevice IDs, therefore checking | |
1140 | * its on-board VGA controller */ | |
1141 | asus_hides_smbus = 1; | |
1142 | } | |
1da177e4 LT |
1143 | } |
1144 | } | |
652c538e AM |
1145 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); |
1146 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge); | |
1147 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge); | |
1148 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge); | |
677cc644 | 1149 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge); |
652c538e AM |
1150 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge); |
1151 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge); | |
1152 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge); | |
1153 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge); | |
1154 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); | |
1155 | ||
1156 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); | |
10260d9a | 1157 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_IG, asus_hides_smbus_hostbridge); |
27e46859 | 1158 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); |
d7698edc | 1159 | |
1597cacb | 1160 | static void asus_hides_smbus_lpc(struct pci_dev *dev) |
1da177e4 LT |
1161 | { |
1162 | u16 val; | |
1163 | ||
1164 | if (likely(!asus_hides_smbus)) | |
1165 | return; | |
1166 | ||
1167 | pci_read_config_word(dev, 0xF2, &val); | |
1168 | if (val & 0x8) { | |
1169 | pci_write_config_word(dev, 0xF2, val & (~0x8)); | |
1170 | pci_read_config_word(dev, 0xF2, &val); | |
1171 | if (val & 0x8) | |
f0fda801 | 1172 | dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", val); |
1da177e4 | 1173 | else |
f0fda801 | 1174 | dev_info(&dev->dev, "Enabled i801 SMBus device\n"); |
1da177e4 LT |
1175 | } |
1176 | } | |
652c538e AM |
1177 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); |
1178 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); | |
1179 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); | |
1180 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); | |
1181 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); | |
1182 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); | |
1183 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); | |
e1a2a51e RW |
1184 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); |
1185 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); | |
1186 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); | |
1187 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); | |
1188 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); | |
1189 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); | |
1190 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); | |
1597cacb | 1191 | |
e1a2a51e RW |
1192 | /* It appears we just have one such device. If not, we have a warning */ |
1193 | static void __iomem *asus_rcba_base; | |
1194 | static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) | |
acc06632 | 1195 | { |
e1a2a51e | 1196 | u32 rcba; |
acc06632 RM |
1197 | |
1198 | if (likely(!asus_hides_smbus)) | |
1199 | return; | |
e1a2a51e RW |
1200 | WARN_ON(asus_rcba_base); |
1201 | ||
acc06632 | 1202 | pci_read_config_dword(dev, 0xF0, &rcba); |
e1a2a51e RW |
1203 | /* use bits 31:14, 16 kB aligned */ |
1204 | asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); | |
1205 | if (asus_rcba_base == NULL) | |
1206 | return; | |
1207 | } | |
1208 | ||
1209 | static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) | |
1210 | { | |
1211 | u32 val; | |
1212 | ||
1213 | if (likely(!asus_hides_smbus || !asus_rcba_base)) | |
1214 | return; | |
1215 | /* read the Function Disable register, dword mode only */ | |
1216 | val = readl(asus_rcba_base + 0x3418); | |
1217 | writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */ | |
1218 | } | |
1219 | ||
1220 | static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) | |
1221 | { | |
1222 | if (likely(!asus_hides_smbus || !asus_rcba_base)) | |
1223 | return; | |
1224 | iounmap(asus_rcba_base); | |
1225 | asus_rcba_base = NULL; | |
f0fda801 | 1226 | dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n"); |
acc06632 | 1227 | } |
e1a2a51e RW |
1228 | |
1229 | static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) | |
1230 | { | |
1231 | asus_hides_smbus_lpc_ich6_suspend(dev); | |
1232 | asus_hides_smbus_lpc_ich6_resume_early(dev); | |
1233 | asus_hides_smbus_lpc_ich6_resume(dev); | |
1234 | } | |
652c538e | 1235 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); |
e1a2a51e RW |
1236 | DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); |
1237 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); | |
1238 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); | |
ce007ea5 | 1239 | |
1da177e4 LT |
1240 | /* |
1241 | * SiS 96x south bridge: BIOS typically hides SMBus device... | |
1242 | */ | |
1597cacb | 1243 | static void quirk_sis_96x_smbus(struct pci_dev *dev) |
1da177e4 LT |
1244 | { |
1245 | u8 val = 0; | |
1da177e4 | 1246 | pci_read_config_byte(dev, 0x77, &val); |
2f5c33b3 | 1247 | if (val & 0x10) { |
f0fda801 | 1248 | dev_info(&dev->dev, "Enabling SiS 96x SMBus\n"); |
2f5c33b3 MH |
1249 | pci_write_config_byte(dev, 0x77, val & ~0x10); |
1250 | } | |
1da177e4 | 1251 | } |
652c538e AM |
1252 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); |
1253 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); | |
1254 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); | |
1255 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); | |
e1a2a51e RW |
1256 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); |
1257 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); | |
1258 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); | |
1259 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); | |
1da177e4 | 1260 | |
1da177e4 LT |
1261 | /* |
1262 | * ... This is further complicated by the fact that some SiS96x south | |
1263 | * bridges pretend to be 85C503/5513 instead. In that case see if we | |
1264 | * spotted a compatible north bridge to make sure. | |
1265 | * (pci_find_device doesn't work yet) | |
1266 | * | |
1267 | * We can also enable the sis96x bit in the discovery register.. | |
1268 | */ | |
1da177e4 LT |
1269 | #define SIS_DETECT_REGISTER 0x40 |
1270 | ||
1597cacb | 1271 | static void quirk_sis_503(struct pci_dev *dev) |
1da177e4 LT |
1272 | { |
1273 | u8 reg; | |
1274 | u16 devid; | |
1275 | ||
1276 | pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); | |
1277 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); | |
1278 | pci_read_config_word(dev, PCI_DEVICE_ID, &devid); | |
1279 | if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { | |
1280 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); | |
1281 | return; | |
1282 | } | |
1283 | ||
1da177e4 | 1284 | /* |
2f5c33b3 MH |
1285 | * Ok, it now shows up as a 96x.. run the 96x quirk by |
1286 | * hand in case it has already been processed. | |
1287 | * (depends on link order, which is apparently not guaranteed) | |
1da177e4 LT |
1288 | */ |
1289 | dev->device = devid; | |
2f5c33b3 | 1290 | quirk_sis_96x_smbus(dev); |
1da177e4 | 1291 | } |
652c538e | 1292 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); |
e1a2a51e | 1293 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); |
1da177e4 | 1294 | |
1da177e4 | 1295 | |
e5548e96 BJD |
1296 | /* |
1297 | * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller | |
1298 | * and MC97 modem controller are disabled when a second PCI soundcard is | |
1299 | * present. This patch, tweaking the VT8237 ISA bridge, enables them. | |
1300 | * -- bjd | |
1301 | */ | |
1597cacb | 1302 | static void asus_hides_ac97_lpc(struct pci_dev *dev) |
e5548e96 BJD |
1303 | { |
1304 | u8 val; | |
1305 | int asus_hides_ac97 = 0; | |
1306 | ||
1307 | if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { | |
1308 | if (dev->device == PCI_DEVICE_ID_VIA_8237) | |
1309 | asus_hides_ac97 = 1; | |
1310 | } | |
1311 | ||
1312 | if (!asus_hides_ac97) | |
1313 | return; | |
1314 | ||
1315 | pci_read_config_byte(dev, 0x50, &val); | |
1316 | if (val & 0xc0) { | |
1317 | pci_write_config_byte(dev, 0x50, val & (~0xc0)); | |
1318 | pci_read_config_byte(dev, 0x50, &val); | |
1319 | if (val & 0xc0) | |
f0fda801 | 1320 | dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", val); |
e5548e96 | 1321 | else |
f0fda801 | 1322 | dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n"); |
e5548e96 BJD |
1323 | } |
1324 | } | |
652c538e | 1325 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); |
e1a2a51e | 1326 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); |
1597cacb | 1327 | |
77967052 | 1328 | #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) |
15e0c694 AC |
1329 | |
1330 | /* | |
1331 | * If we are using libata we can drive this chip properly but must | |
1332 | * do this early on to make the additional device appear during | |
1333 | * the PCI scanning. | |
1334 | */ | |
5ee2ae7f | 1335 | static void quirk_jmicron_ata(struct pci_dev *pdev) |
15e0c694 | 1336 | { |
e34bb370 | 1337 | u32 conf1, conf5, class; |
15e0c694 AC |
1338 | u8 hdr; |
1339 | ||
1340 | /* Only poke fn 0 */ | |
1341 | if (PCI_FUNC(pdev->devfn)) | |
1342 | return; | |
1343 | ||
5ee2ae7f TH |
1344 | pci_read_config_dword(pdev, 0x40, &conf1); |
1345 | pci_read_config_dword(pdev, 0x80, &conf5); | |
15e0c694 | 1346 | |
5ee2ae7f TH |
1347 | conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ |
1348 | conf5 &= ~(1 << 24); /* Clear bit 24 */ | |
1349 | ||
1350 | switch (pdev->device) { | |
1351 | case PCI_DEVICE_ID_JMICRON_JMB360: | |
1352 | /* The controller should be in single function ahci mode */ | |
1353 | conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ | |
1354 | break; | |
1355 | ||
1356 | case PCI_DEVICE_ID_JMICRON_JMB365: | |
1357 | case PCI_DEVICE_ID_JMICRON_JMB366: | |
1358 | /* Redirect IDE second PATA port to the right spot */ | |
1359 | conf5 |= (1 << 24); | |
1360 | /* Fall through */ | |
1361 | case PCI_DEVICE_ID_JMICRON_JMB361: | |
1362 | case PCI_DEVICE_ID_JMICRON_JMB363: | |
1363 | /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ | |
1364 | /* Set the class codes correctly and then direct IDE 0 */ | |
3a9e3a51 | 1365 | conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ |
5ee2ae7f TH |
1366 | break; |
1367 | ||
1368 | case PCI_DEVICE_ID_JMICRON_JMB368: | |
1369 | /* The controller should be in single function IDE mode */ | |
1370 | conf1 |= 0x00C00000; /* Set 22, 23 */ | |
1371 | break; | |
15e0c694 | 1372 | } |
5ee2ae7f TH |
1373 | |
1374 | pci_write_config_dword(pdev, 0x40, conf1); | |
1375 | pci_write_config_dword(pdev, 0x80, conf5); | |
1376 | ||
1377 | /* Update pdev accordingly */ | |
1378 | pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); | |
1379 | pdev->hdr_type = hdr & 0x7f; | |
1380 | pdev->multifunction = !!(hdr & 0x80); | |
e34bb370 TH |
1381 | |
1382 | pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class); | |
1383 | pdev->class = class >> 8; | |
15e0c694 | 1384 | } |
5ee2ae7f TH |
1385 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); |
1386 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); | |
1387 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); | |
1388 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); | |
1389 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); | |
1390 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); | |
e1a2a51e RW |
1391 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); |
1392 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); | |
1393 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); | |
1394 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); | |
1395 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); | |
1396 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); | |
15e0c694 AC |
1397 | |
1398 | #endif | |
1399 | ||
1da177e4 LT |
1400 | #ifdef CONFIG_X86_IO_APIC |
1401 | static void __init quirk_alder_ioapic(struct pci_dev *pdev) | |
1402 | { | |
1403 | int i; | |
1404 | ||
1405 | if ((pdev->class >> 8) != 0xff00) | |
1406 | return; | |
1407 | ||
1408 | /* the first BAR is the location of the IO APIC...we must | |
1409 | * not touch this (and it's already covered by the fixmap), so | |
1410 | * forcibly insert it into the resource tree */ | |
1411 | if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) | |
1412 | insert_resource(&iomem_resource, &pdev->resource[0]); | |
1413 | ||
1414 | /* The next five BARs all seem to be rubbish, so just clean | |
1415 | * them out */ | |
1416 | for (i=1; i < 6; i++) { | |
1417 | memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); | |
1418 | } | |
1419 | ||
1420 | } | |
652c538e | 1421 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); |
1da177e4 LT |
1422 | #endif |
1423 | ||
1da177e4 LT |
1424 | static void __devinit quirk_pcie_mch(struct pci_dev *pdev) |
1425 | { | |
1426 | pcie_mch_quirk = 1; | |
1427 | } | |
652c538e AM |
1428 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch); |
1429 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch); | |
1430 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch); | |
1da177e4 | 1431 | |
4602b88d KA |
1432 | |
1433 | /* | |
1434 | * It's possible for the MSI to get corrupted if shpc and acpi | |
1435 | * are used together on certain PXH-based systems. | |
1436 | */ | |
1437 | static void __devinit quirk_pcie_pxh(struct pci_dev *dev) | |
1438 | { | |
f5f2b131 | 1439 | pci_msi_off(dev); |
4602b88d | 1440 | dev->no_msi = 1; |
f0fda801 | 1441 | dev_warn(&dev->dev, "PXH quirk detected; SHPC device MSI disabled\n"); |
4602b88d KA |
1442 | } |
1443 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); | |
1444 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); | |
1445 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); | |
1446 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); | |
1447 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); | |
1448 | ||
ffadcc2f KCA |
1449 | /* |
1450 | * Some Intel PCI Express chipsets have trouble with downstream | |
1451 | * device power management. | |
1452 | */ | |
1453 | static void quirk_intel_pcie_pm(struct pci_dev * dev) | |
1454 | { | |
1455 | pci_pm_d3_delay = 120; | |
1456 | dev->no_d1d2 = 1; | |
1457 | } | |
1458 | ||
1459 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); | |
1460 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); | |
1461 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); | |
1462 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); | |
1463 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); | |
1464 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); | |
1465 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); | |
1466 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); | |
1467 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); | |
1468 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); | |
1469 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); | |
1470 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); | |
1471 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); | |
1472 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); | |
1473 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); | |
1474 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); | |
1475 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); | |
1476 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); | |
1477 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); | |
1478 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); | |
1479 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); | |
4602b88d | 1480 | |
426b3b8d | 1481 | #ifdef CONFIG_X86_IO_APIC |
e1d3a908 SA |
1482 | /* |
1483 | * Boot interrupts on some chipsets cannot be turned off. For these chipsets, | |
1484 | * remap the original interrupt in the linux kernel to the boot interrupt, so | |
1485 | * that a PCI device's interrupt handler is installed on the boot interrupt | |
1486 | * line instead. | |
1487 | */ | |
1488 | static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) | |
1489 | { | |
41b9eb26 | 1490 | if (noioapicquirk || noioapicreroute) |
e1d3a908 SA |
1491 | return; |
1492 | ||
1493 | dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; | |
1494 | ||
1495 | printk(KERN_INFO "PCI quirk: reroute interrupts for 0x%04x:0x%04x\n", | |
1496 | dev->vendor, dev->device); | |
1497 | return; | |
1498 | } | |
88d1dce3 OD |
1499 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); |
1500 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); | |
1501 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); | |
1502 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); | |
1503 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); | |
1504 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); | |
1505 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); | |
1506 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); | |
1507 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); | |
1508 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); | |
1509 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); | |
1510 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); | |
1511 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); | |
1512 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); | |
1513 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); | |
1514 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); | |
e1d3a908 | 1515 | |
426b3b8d SA |
1516 | /* |
1517 | * On some chipsets we can disable the generation of legacy INTx boot | |
1518 | * interrupts. | |
1519 | */ | |
1520 | ||
1521 | /* | |
1522 | * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no | |
1523 | * 300641-004US, section 5.7.3. | |
1524 | */ | |
1525 | #define INTEL_6300_IOAPIC_ABAR 0x40 | |
1526 | #define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) | |
1527 | ||
1528 | static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) | |
1529 | { | |
1530 | u16 pci_config_word; | |
1531 | ||
1532 | if (noioapicquirk) | |
1533 | return; | |
1534 | ||
1535 | pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); | |
1536 | pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; | |
1537 | pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); | |
1538 | ||
1539 | printk(KERN_INFO "disabled boot interrupt on device 0x%04x:0x%04x\n", | |
1540 | dev->vendor, dev->device); | |
1541 | } | |
88d1dce3 OD |
1542 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); |
1543 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); | |
77251188 OD |
1544 | |
1545 | /* | |
1546 | * disable boot interrupts on HT-1000 | |
1547 | */ | |
1548 | #define BC_HT1000_FEATURE_REG 0x64 | |
1549 | #define BC_HT1000_PIC_REGS_ENABLE (1<<0) | |
1550 | #define BC_HT1000_MAP_IDX 0xC00 | |
1551 | #define BC_HT1000_MAP_DATA 0xC01 | |
1552 | ||
1553 | static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) | |
1554 | { | |
1555 | u32 pci_config_dword; | |
1556 | u8 irq; | |
1557 | ||
1558 | if (noioapicquirk) | |
1559 | return; | |
1560 | ||
1561 | pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); | |
1562 | pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | | |
1563 | BC_HT1000_PIC_REGS_ENABLE); | |
1564 | ||
1565 | for (irq = 0x10; irq < 0x10 + 32; irq++) { | |
1566 | outb(irq, BC_HT1000_MAP_IDX); | |
1567 | outb(0x00, BC_HT1000_MAP_DATA); | |
1568 | } | |
1569 | ||
1570 | pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); | |
1571 | ||
1572 | printk(KERN_INFO "disabled boot interrupts on PCI device" | |
1573 | "0x%04x:0x%04x\n", dev->vendor, dev->device); | |
1574 | } | |
88d1dce3 OD |
1575 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); |
1576 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); | |
542622da OD |
1577 | |
1578 | /* | |
1579 | * disable boot interrupts on AMD and ATI chipsets | |
1580 | */ | |
1581 | /* | |
1582 | * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 | |
1583 | * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode | |
1584 | * (due to an erratum). | |
1585 | */ | |
1586 | #define AMD_813X_MISC 0x40 | |
1587 | #define AMD_813X_NOIOAMODE (1<<0) | |
bbe19443 | 1588 | #define AMD_813X_REV_B2 0x13 |
542622da OD |
1589 | |
1590 | static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) | |
1591 | { | |
1592 | u32 pci_config_dword; | |
1593 | ||
1594 | if (noioapicquirk) | |
1595 | return; | |
bbe19443 SA |
1596 | if (dev->revision == AMD_813X_REV_B2) |
1597 | return; | |
542622da OD |
1598 | |
1599 | pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); | |
1600 | pci_config_dword &= ~AMD_813X_NOIOAMODE; | |
1601 | pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); | |
1602 | ||
1603 | printk(KERN_INFO "disabled boot interrupts on PCI device " | |
1604 | "0x%04x:0x%04x\n", dev->vendor, dev->device); | |
1605 | } | |
88d1dce3 OD |
1606 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); |
1607 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); | |
542622da OD |
1608 | |
1609 | #define AMD_8111_PCI_IRQ_ROUTING 0x56 | |
1610 | ||
1611 | static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) | |
1612 | { | |
1613 | u16 pci_config_word; | |
1614 | ||
1615 | if (noioapicquirk) | |
1616 | return; | |
1617 | ||
1618 | pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); | |
1619 | if (!pci_config_word) { | |
1620 | printk(KERN_INFO "boot interrupts on PCI device 0x%04x:0x%04x " | |
1621 | "already disabled\n", | |
1622 | dev->vendor, dev->device); | |
1623 | return; | |
1624 | } | |
1625 | pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); | |
1626 | printk(KERN_INFO "disabled boot interrupts on PCI device " | |
1627 | "0x%04x:0x%04x\n", dev->vendor, dev->device); | |
1628 | } | |
88d1dce3 OD |
1629 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); |
1630 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); | |
426b3b8d SA |
1631 | #endif /* CONFIG_X86_IO_APIC */ |
1632 | ||
33dced2e SS |
1633 | /* |
1634 | * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size | |
1635 | * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. | |
1636 | * Re-allocate the region if needed... | |
1637 | */ | |
1638 | static void __init quirk_tc86c001_ide(struct pci_dev *dev) | |
1639 | { | |
1640 | struct resource *r = &dev->resource[0]; | |
1641 | ||
1642 | if (r->start & 0x8) { | |
1643 | r->start = 0; | |
1644 | r->end = 0xf; | |
1645 | } | |
1646 | } | |
1647 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, | |
1648 | PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, | |
1649 | quirk_tc86c001_ide); | |
1650 | ||
1da177e4 LT |
1651 | static void __devinit quirk_netmos(struct pci_dev *dev) |
1652 | { | |
1653 | unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; | |
1654 | unsigned int num_serial = dev->subsystem_device & 0xf; | |
1655 | ||
1656 | /* | |
1657 | * These Netmos parts are multiport serial devices with optional | |
1658 | * parallel ports. Even when parallel ports are present, they | |
1659 | * are identified as class SERIAL, which means the serial driver | |
1660 | * will claim them. To prevent this, mark them as class OTHER. | |
1661 | * These combo devices should be claimed by parport_serial. | |
1662 | * | |
1663 | * The subdevice ID is of the form 0x00PS, where <P> is the number | |
1664 | * of parallel ports and <S> is the number of serial ports. | |
1665 | */ | |
1666 | switch (dev->device) { | |
1667 | case PCI_DEVICE_ID_NETMOS_9735: | |
1668 | case PCI_DEVICE_ID_NETMOS_9745: | |
1669 | case PCI_DEVICE_ID_NETMOS_9835: | |
1670 | case PCI_DEVICE_ID_NETMOS_9845: | |
1671 | case PCI_DEVICE_ID_NETMOS_9855: | |
1672 | if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_SERIAL && | |
1673 | num_parallel) { | |
f0fda801 | 1674 | dev_info(&dev->dev, "Netmos %04x (%u parallel, " |
1da177e4 LT |
1675 | "%u serial); changing class SERIAL to OTHER " |
1676 | "(use parport_serial)\n", | |
1677 | dev->device, num_parallel, num_serial); | |
1678 | dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | | |
1679 | (dev->class & 0xff); | |
1680 | } | |
1681 | } | |
1682 | } | |
1683 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); | |
1684 | ||
16a74744 BH |
1685 | static void __devinit quirk_e100_interrupt(struct pci_dev *dev) |
1686 | { | |
e64aeccb | 1687 | u16 command, pmcsr; |
16a74744 BH |
1688 | u8 __iomem *csr; |
1689 | u8 cmd_hi; | |
e64aeccb | 1690 | int pm; |
16a74744 BH |
1691 | |
1692 | switch (dev->device) { | |
1693 | /* PCI IDs taken from drivers/net/e100.c */ | |
1694 | case 0x1029: | |
1695 | case 0x1030 ... 0x1034: | |
1696 | case 0x1038 ... 0x103E: | |
1697 | case 0x1050 ... 0x1057: | |
1698 | case 0x1059: | |
1699 | case 0x1064 ... 0x106B: | |
1700 | case 0x1091 ... 0x1095: | |
1701 | case 0x1209: | |
1702 | case 0x1229: | |
1703 | case 0x2449: | |
1704 | case 0x2459: | |
1705 | case 0x245D: | |
1706 | case 0x27DC: | |
1707 | break; | |
1708 | default: | |
1709 | return; | |
1710 | } | |
1711 | ||
1712 | /* | |
1713 | * Some firmware hands off the e100 with interrupts enabled, | |
1714 | * which can cause a flood of interrupts if packets are | |
1715 | * received before the driver attaches to the device. So | |
1716 | * disable all e100 interrupts here. The driver will | |
1717 | * re-enable them when it's ready. | |
1718 | */ | |
1719 | pci_read_config_word(dev, PCI_COMMAND, &command); | |
16a74744 | 1720 | |
1bef7dc0 | 1721 | if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) |
16a74744 BH |
1722 | return; |
1723 | ||
e64aeccb IK |
1724 | /* |
1725 | * Check that the device is in the D0 power state. If it's not, | |
1726 | * there is no point to look any further. | |
1727 | */ | |
1728 | pm = pci_find_capability(dev, PCI_CAP_ID_PM); | |
1729 | if (pm) { | |
1730 | pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); | |
1731 | if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) | |
1732 | return; | |
1733 | } | |
1734 | ||
1bef7dc0 BH |
1735 | /* Convert from PCI bus to resource space. */ |
1736 | csr = ioremap(pci_resource_start(dev, 0), 8); | |
16a74744 | 1737 | if (!csr) { |
f0fda801 | 1738 | dev_warn(&dev->dev, "Can't map e100 registers\n"); |
16a74744 BH |
1739 | return; |
1740 | } | |
1741 | ||
1742 | cmd_hi = readb(csr + 3); | |
1743 | if (cmd_hi == 0) { | |
f0fda801 | 1744 | dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; " |
1745 | "disabling\n"); | |
16a74744 BH |
1746 | writeb(1, csr + 3); |
1747 | } | |
1748 | ||
1749 | iounmap(csr); | |
1750 | } | |
4e68fc97 | 1751 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); |
a5312e28 | 1752 | |
649426ef AD |
1753 | /* |
1754 | * The 82575 and 82598 may experience data corruption issues when transitioning | |
1755 | * out of L0S. To prevent this we need to disable L0S on the pci-e link | |
1756 | */ | |
1757 | static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev) | |
1758 | { | |
1759 | dev_info(&dev->dev, "Disabling L0s\n"); | |
1760 | pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); | |
1761 | } | |
1762 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); | |
1763 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); | |
1764 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); | |
1765 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); | |
1766 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); | |
1767 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); | |
1768 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); | |
1769 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); | |
1770 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); | |
1771 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); | |
1772 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); | |
1773 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); | |
1774 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); | |
1775 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); | |
1776 | ||
a5312e28 IK |
1777 | static void __devinit fixup_rev1_53c810(struct pci_dev* dev) |
1778 | { | |
1779 | /* rev 1 ncr53c810 chips don't set the class at all which means | |
1780 | * they don't get their resources remapped. Fix that here. | |
1781 | */ | |
1782 | ||
1783 | if (dev->class == PCI_CLASS_NOT_DEFINED) { | |
f0fda801 | 1784 | dev_info(&dev->dev, "NCR 53c810 rev 1 detected; setting PCI class\n"); |
a5312e28 IK |
1785 | dev->class = PCI_CLASS_STORAGE_SCSI; |
1786 | } | |
1787 | } | |
1788 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); | |
1789 | ||
9d265124 DY |
1790 | /* Enable 1k I/O space granularity on the Intel P64H2 */ |
1791 | static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) | |
1792 | { | |
1793 | u16 en1k; | |
1794 | u8 io_base_lo, io_limit_lo; | |
1795 | unsigned long base, limit; | |
1796 | struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES; | |
1797 | ||
1798 | pci_read_config_word(dev, 0x40, &en1k); | |
1799 | ||
1800 | if (en1k & 0x200) { | |
f0fda801 | 1801 | dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n"); |
9d265124 DY |
1802 | |
1803 | pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); | |
1804 | pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo); | |
1805 | base = (io_base_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8; | |
1806 | limit = (io_limit_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8; | |
1807 | ||
1808 | if (base <= limit) { | |
1809 | res->start = base; | |
1810 | res->end = limit + 0x3ff; | |
1811 | } | |
1812 | } | |
1813 | } | |
1814 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); | |
1815 | ||
15a260d5 DY |
1816 | /* Fix the IOBL_ADR for 1k I/O space granularity on the Intel P64H2 |
1817 | * The IOBL_ADR gets re-written to 4k boundaries in pci_setup_bridge() | |
1818 | * in drivers/pci/setup-bus.c | |
1819 | */ | |
1820 | static void __devinit quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev) | |
1821 | { | |
1822 | u16 en1k, iobl_adr, iobl_adr_1k; | |
1823 | struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES; | |
1824 | ||
1825 | pci_read_config_word(dev, 0x40, &en1k); | |
1826 | ||
1827 | if (en1k & 0x200) { | |
1828 | pci_read_config_word(dev, PCI_IO_BASE, &iobl_adr); | |
1829 | ||
1830 | iobl_adr_1k = iobl_adr | (res->start >> 8) | (res->end & 0xfc00); | |
1831 | ||
1832 | if (iobl_adr != iobl_adr_1k) { | |
f0fda801 | 1833 | dev_info(&dev->dev, "Fixing P64H2 IOBL_ADR from 0x%x to 0x%x for 1KB granularity\n", |
15a260d5 DY |
1834 | iobl_adr,iobl_adr_1k); |
1835 | pci_write_config_word(dev, PCI_IO_BASE, iobl_adr_1k); | |
1836 | } | |
1837 | } | |
1838 | } | |
1839 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io_fix_iobl); | |
1840 | ||
cf34a8e0 BG |
1841 | /* Under some circumstances, AER is not linked with extended capabilities. |
1842 | * Force it to be linked by setting the corresponding control bit in the | |
1843 | * config space. | |
1844 | */ | |
1597cacb | 1845 | static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) |
cf34a8e0 BG |
1846 | { |
1847 | uint8_t b; | |
1848 | if (pci_read_config_byte(dev, 0xf41, &b) == 0) { | |
1849 | if (!(b & 0x20)) { | |
1850 | pci_write_config_byte(dev, 0xf41, b | 0x20); | |
f0fda801 | 1851 | dev_info(&dev->dev, |
1852 | "Linking AER extended capability\n"); | |
cf34a8e0 BG |
1853 | } |
1854 | } | |
1855 | } | |
1856 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, | |
1857 | quirk_nvidia_ck804_pcie_aer_ext_cap); | |
e1a2a51e | 1858 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, |
1597cacb | 1859 | quirk_nvidia_ck804_pcie_aer_ext_cap); |
cf34a8e0 | 1860 | |
53a9bf42 TY |
1861 | static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) |
1862 | { | |
1863 | /* | |
1864 | * Disable PCI Bus Parking and PCI Master read caching on CX700 | |
1865 | * which causes unspecified timing errors with a VT6212L on the PCI | |
1866 | * bus leading to USB2.0 packet loss. The defaults are that these | |
1867 | * features are turned off but some BIOSes turn them on. | |
1868 | */ | |
1869 | ||
1870 | uint8_t b; | |
1871 | if (pci_read_config_byte(dev, 0x76, &b) == 0) { | |
1872 | if (b & 0x40) { | |
1873 | /* Turn off PCI Bus Parking */ | |
1874 | pci_write_config_byte(dev, 0x76, b ^ 0x40); | |
1875 | ||
bc043274 TY |
1876 | dev_info(&dev->dev, |
1877 | "Disabling VIA CX700 PCI parking\n"); | |
1878 | } | |
1879 | } | |
1880 | ||
1881 | if (pci_read_config_byte(dev, 0x72, &b) == 0) { | |
1882 | if (b != 0) { | |
53a9bf42 TY |
1883 | /* Turn off PCI Master read caching */ |
1884 | pci_write_config_byte(dev, 0x72, 0x0); | |
bc043274 TY |
1885 | |
1886 | /* Set PCI Master Bus time-out to "1x16 PCLK" */ | |
53a9bf42 | 1887 | pci_write_config_byte(dev, 0x75, 0x1); |
bc043274 TY |
1888 | |
1889 | /* Disable "Read FIFO Timer" */ | |
53a9bf42 TY |
1890 | pci_write_config_byte(dev, 0x77, 0x0); |
1891 | ||
d6505a52 | 1892 | dev_info(&dev->dev, |
bc043274 | 1893 | "Disabling VIA CX700 PCI caching\n"); |
53a9bf42 TY |
1894 | } |
1895 | } | |
1896 | } | |
1897 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); | |
1898 | ||
99cb233d BL |
1899 | /* |
1900 | * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the | |
1901 | * VPD end tag will hang the device. This problem was initially | |
1902 | * observed when a vpd entry was created in sysfs | |
1903 | * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry | |
1904 | * will dump 32k of data. Reading a full 32k will cause an access | |
1905 | * beyond the VPD end tag causing the device to hang. Once the device | |
1906 | * is hung, the bnx2 driver will not be able to reset the device. | |
1907 | * We believe that it is legal to read beyond the end tag and | |
1908 | * therefore the solution is to limit the read/write length. | |
1909 | */ | |
1910 | static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev) | |
1911 | { | |
9d82d8ea | 1912 | /* |
35405f25 DH |
1913 | * Only disable the VPD capability for 5706, 5706S, 5708, |
1914 | * 5708S and 5709 rev. A | |
9d82d8ea | 1915 | */ |
99cb233d | 1916 | if ((dev->device == PCI_DEVICE_ID_NX2_5706) || |
35405f25 | 1917 | (dev->device == PCI_DEVICE_ID_NX2_5706S) || |
99cb233d | 1918 | (dev->device == PCI_DEVICE_ID_NX2_5708) || |
9d82d8ea | 1919 | (dev->device == PCI_DEVICE_ID_NX2_5708S) || |
99cb233d BL |
1920 | ((dev->device == PCI_DEVICE_ID_NX2_5709) && |
1921 | (dev->revision & 0xf0) == 0x0)) { | |
1922 | if (dev->vpd) | |
1923 | dev->vpd->len = 0x80; | |
1924 | } | |
1925 | } | |
1926 | ||
bffadffd YZ |
1927 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
1928 | PCI_DEVICE_ID_NX2_5706, | |
1929 | quirk_brcm_570x_limit_vpd); | |
1930 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
1931 | PCI_DEVICE_ID_NX2_5706S, | |
1932 | quirk_brcm_570x_limit_vpd); | |
1933 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
1934 | PCI_DEVICE_ID_NX2_5708, | |
1935 | quirk_brcm_570x_limit_vpd); | |
1936 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
1937 | PCI_DEVICE_ID_NX2_5708S, | |
1938 | quirk_brcm_570x_limit_vpd); | |
1939 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
1940 | PCI_DEVICE_ID_NX2_5709, | |
1941 | quirk_brcm_570x_limit_vpd); | |
1942 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
1943 | PCI_DEVICE_ID_NX2_5709S, | |
1944 | quirk_brcm_570x_limit_vpd); | |
99cb233d | 1945 | |
3f79e107 | 1946 | #ifdef CONFIG_PCI_MSI |
ebdf7d39 TH |
1947 | /* Some chipsets do not support MSI. We cannot easily rely on setting |
1948 | * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually | |
1949 | * some other busses controlled by the chipset even if Linux is not | |
1950 | * aware of it. Instead of setting the flag on all busses in the | |
1951 | * machine, simply disable MSI globally. | |
3f79e107 | 1952 | */ |
ebdf7d39 | 1953 | static void __init quirk_disable_all_msi(struct pci_dev *dev) |
3f79e107 | 1954 | { |
88187dfa | 1955 | pci_no_msi(); |
f0fda801 | 1956 | dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n"); |
3f79e107 | 1957 | } |
ebdf7d39 TH |
1958 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); |
1959 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); | |
1960 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); | |
66d715c9 | 1961 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); |
184b812f | 1962 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); |
3f79e107 BG |
1963 | |
1964 | /* Disable MSI on chipsets that are known to not support it */ | |
1965 | static void __devinit quirk_disable_msi(struct pci_dev *dev) | |
1966 | { | |
1967 | if (dev->subordinate) { | |
f0fda801 | 1968 | dev_warn(&dev->dev, "MSI quirk detected; " |
1969 | "subordinate MSI disabled\n"); | |
3f79e107 BG |
1970 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
1971 | } | |
1972 | } | |
1973 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); | |
6397c75c BG |
1974 | |
1975 | /* Go through the list of Hypertransport capabilities and | |
1976 | * return 1 if a HT MSI capability is found and enabled */ | |
1977 | static int __devinit msi_ht_cap_enabled(struct pci_dev *dev) | |
1978 | { | |
7a380507 ME |
1979 | int pos, ttl = 48; |
1980 | ||
1981 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
1982 | while (pos && ttl--) { | |
1983 | u8 flags; | |
1984 | ||
1985 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
1986 | &flags) == 0) | |
1987 | { | |
f0fda801 | 1988 | dev_info(&dev->dev, "Found %s HT MSI Mapping\n", |
7a380507 | 1989 | flags & HT_MSI_FLAGS_ENABLE ? |
f0fda801 | 1990 | "enabled" : "disabled"); |
7a380507 | 1991 | return (flags & HT_MSI_FLAGS_ENABLE) != 0; |
6397c75c | 1992 | } |
7a380507 ME |
1993 | |
1994 | pos = pci_find_next_ht_capability(dev, pos, | |
1995 | HT_CAPTYPE_MSI_MAPPING); | |
6397c75c BG |
1996 | } |
1997 | return 0; | |
1998 | } | |
1999 | ||
2000 | /* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ | |
2001 | static void __devinit quirk_msi_ht_cap(struct pci_dev *dev) | |
2002 | { | |
2003 | if (dev->subordinate && !msi_ht_cap_enabled(dev)) { | |
f0fda801 | 2004 | dev_warn(&dev->dev, "MSI quirk detected; " |
2005 | "subordinate MSI disabled\n"); | |
6397c75c BG |
2006 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
2007 | } | |
2008 | } | |
2009 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, | |
2010 | quirk_msi_ht_cap); | |
6bae1d96 | 2011 | |
6397c75c BG |
2012 | /* The nVidia CK804 chipset may have 2 HT MSI mappings. |
2013 | * MSI are supported if the MSI capability set in any of these mappings. | |
2014 | */ | |
2015 | static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) | |
2016 | { | |
2017 | struct pci_dev *pdev; | |
2018 | ||
2019 | if (!dev->subordinate) | |
2020 | return; | |
2021 | ||
2022 | /* check HT MSI cap on this chipset and the root one. | |
2023 | * a single one having MSI is enough to be sure that MSI are supported. | |
2024 | */ | |
11f242f0 | 2025 | pdev = pci_get_slot(dev->bus, 0); |
9ac0ce85 JJ |
2026 | if (!pdev) |
2027 | return; | |
0c875c28 | 2028 | if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { |
f0fda801 | 2029 | dev_warn(&dev->dev, "MSI quirk detected; " |
2030 | "subordinate MSI disabled\n"); | |
6397c75c BG |
2031 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
2032 | } | |
11f242f0 | 2033 | pci_dev_put(pdev); |
6397c75c BG |
2034 | } |
2035 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, | |
2036 | quirk_nvidia_ck804_msi_ht_cap); | |
ba698ad4 | 2037 | |
415b6d0e BH |
2038 | /* Force enable MSI mapping capability on HT bridges */ |
2039 | static void __devinit ht_enable_msi_mapping(struct pci_dev *dev) | |
9dc625e7 PC |
2040 | { |
2041 | int pos, ttl = 48; | |
2042 | ||
2043 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
2044 | while (pos && ttl--) { | |
2045 | u8 flags; | |
2046 | ||
2047 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
2048 | &flags) == 0) { | |
2049 | dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); | |
2050 | ||
2051 | pci_write_config_byte(dev, pos + HT_MSI_FLAGS, | |
2052 | flags | HT_MSI_FLAGS_ENABLE); | |
2053 | } | |
2054 | pos = pci_find_next_ht_capability(dev, pos, | |
2055 | HT_CAPTYPE_MSI_MAPPING); | |
2056 | } | |
2057 | } | |
415b6d0e BH |
2058 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, |
2059 | PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, | |
2060 | ht_enable_msi_mapping); | |
9dc625e7 | 2061 | |
e0ae4f55 YL |
2062 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, |
2063 | ht_enable_msi_mapping); | |
2064 | ||
75e07fc3 AP |
2065 | /* The P5N32-SLI Premium motherboard from Asus has a problem with msi |
2066 | * for the MCP55 NIC. It is not yet determined whether the msi problem | |
2067 | * also affects other devices. As for now, turn off msi for this device. | |
2068 | */ | |
2069 | static void __devinit nvenet_msi_disable(struct pci_dev *dev) | |
2070 | { | |
2071 | if (dmi_name_in_vendors("P5N32-SLI PREMIUM")) { | |
2072 | dev_info(&dev->dev, | |
2073 | "Disabling msi for MCP55 NIC on P5N32-SLI Premium\n"); | |
2074 | dev->no_msi = 1; | |
2075 | } | |
2076 | } | |
2077 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, | |
2078 | PCI_DEVICE_ID_NVIDIA_NVENET_15, | |
2079 | nvenet_msi_disable); | |
2080 | ||
1dec6b05 | 2081 | static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev) |
9dc625e7 PC |
2082 | { |
2083 | struct pci_dev *host_bridge; | |
1dec6b05 YL |
2084 | int pos; |
2085 | int i, dev_no; | |
2086 | int found = 0; | |
2087 | ||
2088 | dev_no = dev->devfn >> 3; | |
2089 | for (i = dev_no; i >= 0; i--) { | |
2090 | host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); | |
2091 | if (!host_bridge) | |
2092 | continue; | |
2093 | ||
2094 | pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); | |
2095 | if (pos != 0) { | |
2096 | found = 1; | |
2097 | break; | |
2098 | } | |
2099 | pci_dev_put(host_bridge); | |
2100 | } | |
2101 | ||
2102 | if (!found) | |
2103 | return; | |
2104 | ||
2105 | /* root did that ! */ | |
2106 | if (msi_ht_cap_enabled(host_bridge)) | |
2107 | goto out; | |
2108 | ||
2109 | ht_enable_msi_mapping(dev); | |
2110 | ||
2111 | out: | |
2112 | pci_dev_put(host_bridge); | |
2113 | } | |
2114 | ||
2115 | static void __devinit ht_disable_msi_mapping(struct pci_dev *dev) | |
2116 | { | |
2117 | int pos, ttl = 48; | |
2118 | ||
2119 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
2120 | while (pos && ttl--) { | |
2121 | u8 flags; | |
2122 | ||
2123 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
2124 | &flags) == 0) { | |
6a958d5b | 2125 | dev_info(&dev->dev, "Disabling HT MSI Mapping\n"); |
1dec6b05 YL |
2126 | |
2127 | pci_write_config_byte(dev, pos + HT_MSI_FLAGS, | |
2128 | flags & ~HT_MSI_FLAGS_ENABLE); | |
2129 | } | |
2130 | pos = pci_find_next_ht_capability(dev, pos, | |
2131 | HT_CAPTYPE_MSI_MAPPING); | |
2132 | } | |
2133 | } | |
2134 | ||
2135 | static int __devinit ht_check_msi_mapping(struct pci_dev *dev) | |
2136 | { | |
9dc625e7 | 2137 | int pos, ttl = 48; |
1dec6b05 YL |
2138 | int found = 0; |
2139 | ||
2140 | /* check if there is HT MSI cap or enabled on this device */ | |
2141 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
2142 | while (pos && ttl--) { | |
2143 | u8 flags; | |
2144 | ||
2145 | if (found < 1) | |
2146 | found = 1; | |
2147 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
2148 | &flags) == 0) { | |
2149 | if (flags & HT_MSI_FLAGS_ENABLE) { | |
2150 | if (found < 2) { | |
2151 | found = 2; | |
2152 | break; | |
2153 | } | |
2154 | } | |
2155 | } | |
2156 | pos = pci_find_next_ht_capability(dev, pos, | |
2157 | HT_CAPTYPE_MSI_MAPPING); | |
2158 | } | |
2159 | ||
2160 | return found; | |
2161 | } | |
2162 | ||
2163 | static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) | |
2164 | { | |
2165 | struct pci_dev *host_bridge; | |
2166 | int pos; | |
2167 | int found; | |
2168 | ||
7726c330 PP |
2169 | /* Enabling HT MSI mapping on this device breaks MCP51 */ |
2170 | if (dev->device == 0x270) | |
2171 | return; | |
2172 | ||
1dec6b05 YL |
2173 | /* check if there is HT MSI cap or enabled on this device */ |
2174 | found = ht_check_msi_mapping(dev); | |
2175 | ||
2176 | /* no HT MSI CAP */ | |
2177 | if (found == 0) | |
2178 | return; | |
9dc625e7 PC |
2179 | |
2180 | /* | |
2181 | * HT MSI mapping should be disabled on devices that are below | |
2182 | * a non-Hypertransport host bridge. Locate the host bridge... | |
2183 | */ | |
2184 | host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); | |
2185 | if (host_bridge == NULL) { | |
2186 | dev_warn(&dev->dev, | |
2187 | "nv_msi_ht_cap_quirk didn't locate host bridge\n"); | |
2188 | return; | |
2189 | } | |
2190 | ||
2191 | pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); | |
2192 | if (pos != 0) { | |
2193 | /* Host bridge is to HT */ | |
1dec6b05 YL |
2194 | if (found == 1) { |
2195 | /* it is not enabled, try to enable it */ | |
2196 | nv_ht_enable_msi_mapping(dev); | |
2197 | } | |
9dc625e7 PC |
2198 | return; |
2199 | } | |
2200 | ||
1dec6b05 YL |
2201 | /* HT MSI is not enabled */ |
2202 | if (found == 1) | |
2203 | return; | |
9dc625e7 | 2204 | |
1dec6b05 YL |
2205 | /* Host bridge is not to HT, disable HT MSI mapping on this device */ |
2206 | ht_disable_msi_mapping(dev); | |
9dc625e7 PC |
2207 | } |
2208 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk); | |
439a7733 | 2209 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk); |
9dc625e7 | 2210 | |
ba698ad4 DM |
2211 | static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev) |
2212 | { | |
2213 | dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; | |
2214 | } | |
4600c9d7 SH |
2215 | static void __devinit quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) |
2216 | { | |
2217 | struct pci_dev *p; | |
2218 | ||
2219 | /* SB700 MSI issue will be fixed at HW level from revision A21, | |
2220 | * we need check PCI REVISION ID of SMBus controller to get SB700 | |
2221 | * revision. | |
2222 | */ | |
2223 | p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, | |
2224 | NULL); | |
2225 | if (!p) | |
2226 | return; | |
2227 | ||
2228 | if ((p->revision < 0x3B) && (p->revision >= 0x30)) | |
2229 | dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; | |
2230 | pci_dev_put(p); | |
2231 | } | |
ba698ad4 DM |
2232 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
2233 | PCI_DEVICE_ID_TIGON3_5780, | |
2234 | quirk_msi_intx_disable_bug); | |
2235 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2236 | PCI_DEVICE_ID_TIGON3_5780S, | |
2237 | quirk_msi_intx_disable_bug); | |
2238 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2239 | PCI_DEVICE_ID_TIGON3_5714, | |
2240 | quirk_msi_intx_disable_bug); | |
2241 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2242 | PCI_DEVICE_ID_TIGON3_5714S, | |
2243 | quirk_msi_intx_disable_bug); | |
2244 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2245 | PCI_DEVICE_ID_TIGON3_5715, | |
2246 | quirk_msi_intx_disable_bug); | |
2247 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2248 | PCI_DEVICE_ID_TIGON3_5715S, | |
2249 | quirk_msi_intx_disable_bug); | |
2250 | ||
bc38b411 | 2251 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390, |
4600c9d7 | 2252 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2253 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391, |
4600c9d7 | 2254 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2255 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392, |
4600c9d7 | 2256 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2257 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393, |
4600c9d7 | 2258 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2259 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394, |
4600c9d7 | 2260 | quirk_msi_intx_disable_ati_bug); |
bc38b411 DM |
2261 | |
2262 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373, | |
2263 | quirk_msi_intx_disable_bug); | |
2264 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, | |
2265 | quirk_msi_intx_disable_bug); | |
2266 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, | |
2267 | quirk_msi_intx_disable_bug); | |
2268 | ||
3f79e107 | 2269 | #endif /* CONFIG_PCI_MSI */ |
3d137310 | 2270 | |
bfb0f330 JB |
2271 | static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, |
2272 | struct pci_fixup *end) | |
3d137310 TP |
2273 | { |
2274 | while (f < end) { | |
2275 | if ((f->vendor == dev->vendor || f->vendor == (u16) PCI_ANY_ID) && | |
bfb0f330 | 2276 | (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) { |
c9bbb4ab | 2277 | dev_dbg(&dev->dev, "calling %pF\n", f->hook); |
3d137310 TP |
2278 | f->hook(dev); |
2279 | } | |
2280 | f++; | |
2281 | } | |
2282 | } | |
2283 | ||
2284 | extern struct pci_fixup __start_pci_fixups_early[]; | |
2285 | extern struct pci_fixup __end_pci_fixups_early[]; | |
2286 | extern struct pci_fixup __start_pci_fixups_header[]; | |
2287 | extern struct pci_fixup __end_pci_fixups_header[]; | |
2288 | extern struct pci_fixup __start_pci_fixups_final[]; | |
2289 | extern struct pci_fixup __end_pci_fixups_final[]; | |
2290 | extern struct pci_fixup __start_pci_fixups_enable[]; | |
2291 | extern struct pci_fixup __end_pci_fixups_enable[]; | |
2292 | extern struct pci_fixup __start_pci_fixups_resume[]; | |
2293 | extern struct pci_fixup __end_pci_fixups_resume[]; | |
2294 | extern struct pci_fixup __start_pci_fixups_resume_early[]; | |
2295 | extern struct pci_fixup __end_pci_fixups_resume_early[]; | |
2296 | extern struct pci_fixup __start_pci_fixups_suspend[]; | |
2297 | extern struct pci_fixup __end_pci_fixups_suspend[]; | |
2298 | ||
2299 | ||
2300 | void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) | |
2301 | { | |
2302 | struct pci_fixup *start, *end; | |
2303 | ||
2304 | switch(pass) { | |
2305 | case pci_fixup_early: | |
2306 | start = __start_pci_fixups_early; | |
2307 | end = __end_pci_fixups_early; | |
2308 | break; | |
2309 | ||
2310 | case pci_fixup_header: | |
2311 | start = __start_pci_fixups_header; | |
2312 | end = __end_pci_fixups_header; | |
2313 | break; | |
2314 | ||
2315 | case pci_fixup_final: | |
2316 | start = __start_pci_fixups_final; | |
2317 | end = __end_pci_fixups_final; | |
2318 | break; | |
2319 | ||
2320 | case pci_fixup_enable: | |
2321 | start = __start_pci_fixups_enable; | |
2322 | end = __end_pci_fixups_enable; | |
2323 | break; | |
2324 | ||
2325 | case pci_fixup_resume: | |
2326 | start = __start_pci_fixups_resume; | |
2327 | end = __end_pci_fixups_resume; | |
2328 | break; | |
2329 | ||
2330 | case pci_fixup_resume_early: | |
2331 | start = __start_pci_fixups_resume_early; | |
2332 | end = __end_pci_fixups_resume_early; | |
2333 | break; | |
2334 | ||
2335 | case pci_fixup_suspend: | |
2336 | start = __start_pci_fixups_suspend; | |
2337 | end = __end_pci_fixups_suspend; | |
2338 | break; | |
2339 | ||
2340 | default: | |
2341 | /* stupid compiler warning, you would think with an enum... */ | |
2342 | return; | |
2343 | } | |
2344 | pci_do_fixups(dev, start, end); | |
2345 | } | |
2346 | #else | |
2347 | void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} | |
2348 | #endif | |
2349 | EXPORT_SYMBOL(pci_fixup_device); |