[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / parport / parport_serial.c

/*
 * Support for common PCI multi-I/O cards (which is most of them)
 *
 * Copyright (C) 2001  Tim Waugh <twaugh@redhat.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 *
 *
 * Multi-function PCI cards are supposed to present separate logical
 * devices on the bus.  A common thing to do seems to be to just use
 * one logical device with lots of base address registers for both
 * parallel ports and serial ports.  This driver is for dealing with
 * that.
 *
 */

#include <linux/types.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/parport.h>
#include <linux/parport_pc.h>
#include <linux/8250_pci.h>

enum parport_pc_pci_cards {
	titan_110l = 0,
	titan_210l,
	netmos_9xx5_combo,
	netmos_9855,
	netmos_9855_2p,
	avlab_1s1p,
	avlab_1s2p,
	avlab_2s1p,
	siig_1s1p_10x,
	siig_2s1p_10x,
	siig_2p1s_20x,
	siig_1s1p_20x,
	siig_2s1p_20x,
};

/* each element directly indexed from enum list, above */
struct parport_pc_pci {
	int numports;
	struct { /* BAR (base address registers) numbers in the config
                    space header */
		int lo;
		int hi; /* -1 if not there, >6 for offset-method (max
                           BAR is 6) */
	} addr[4];

	/* If set, this is called immediately after pci_enable_device.
	 * If it returns non-zero, no probing will take place and the
	 * ports will not be used. */
	int (*preinit_hook) (struct pci_dev *pdev, struct parport_pc_pci *card,
				int autoirq, int autodma);

	/* If set, this is called after probing for ports.  If 'failed'
	 * is non-zero we couldn't use any of the ports. */
	void (*postinit_hook) (struct pci_dev *pdev,
				struct parport_pc_pci *card, int failed);
};

static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par, int autoirq, int autodma)
{
	/* the rule described below doesn't hold for this device */
	if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
			dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
			dev->subsystem_device == 0x0299)
		return -ENODEV;
	/*
	 * Netmos uses the subdevice ID to indicate the number of parallel
	 * and serial ports.  The form is 0x00PS, where <P> is the number of
	 * parallel ports and <S> is the number of serial ports.
	 */
	par->numports = (dev->subsystem_device & 0xf0) >> 4;
	if (par->numports > ARRAY_SIZE(par->addr))
		par->numports = ARRAY_SIZE(par->addr);
	/*
	 * This function is currently only called for cards with up to
	 * one parallel port.
	 * Parallel port BAR is either before or after serial ports BARS;
	 * hence, lo should be either 0 or equal to the number of serial ports.
	 */
	if (par->addr[0].lo != 0)
		par->addr[0].lo = dev->subsystem_device & 0xf;
	return 0;
}

static struct parport_pc_pci cards[] __devinitdata = {
	/* titan_110l */		{ 1, { { 3, -1 }, } },
	/* titan_210l */		{ 1, { { 3, -1 }, } },
	/* netmos_9xx5_combo */		{ 1, { { 2, -1 }, }, netmos_parallel_init },
	/* netmos_9855 */		{ 1, { { 0, -1 }, }, netmos_parallel_init },
	/* netmos_9855_2p */		{ 2, { { 0, -1 }, { 2, -1 }, } },
	/* avlab_1s1p     */		{ 1, { { 1, 2}, } },
	/* avlab_1s2p     */		{ 2, { { 1, 2}, { 3, 4 },} },
	/* avlab_2s1p     */		{ 1, { { 2, 3}, } },
	/* siig_1s1p_10x */		{ 1, { { 3, 4 }, } },
	/* siig_2s1p_10x */		{ 1, { { 4, 5 }, } },
	/* siig_2p1s_20x */		{ 2, { { 1, 2 }, { 3, 4 }, } },
	/* siig_1s1p_20x */		{ 1, { { 1, 2 }, } },
	/* siig_2s1p_20x */		{ 1, { { 2, 3 }, } },
};

static struct pci_device_id parport_serial_pci_tbl[] = {
	/* PCI cards */
	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9745,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
	  0x1000, 0x0020, 0, 0, netmos_9855_2p },
	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
	  0x1000, 0x0022, 0, 0, netmos_9855_2p },
	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
	/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
	{ PCI_VENDOR_ID_AFAVLAB, 0x2110,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
	{ PCI_VENDOR_ID_AFAVLAB, 0x2111,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
	{ PCI_VENDOR_ID_AFAVLAB, 0x2112,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
	{ PCI_VENDOR_ID_AFAVLAB, 0x2140,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
	{ PCI_VENDOR_ID_AFAVLAB, 0x2141,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
	{ PCI_VENDOR_ID_AFAVLAB, 0x2142,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
	{ PCI_VENDOR_ID_AFAVLAB, 0x2160,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
	{ PCI_VENDOR_ID_AFAVLAB, 0x2161,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
	{ PCI_VENDOR_ID_AFAVLAB, 0x2162,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },

	{ 0, } /* terminate list */
};
MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);

/*
 * This table describes the serial "geometry" of these boards.  Any
 * quirks for these can be found in drivers/serial/8250_pci.c
 *
 * Cards not tested are marked n/t
 * If you have one of these cards and it works for you, please tell me..
 */
static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
	[titan_110l] = {
		.flags		= FL_BASE1 | FL_BASE_BARS,
		.num_ports	= 1,
		.base_baud	= 921600,
		.uart_offset	= 8,
	},
	[titan_210l] = {
		.flags		= FL_BASE1 | FL_BASE_BARS,
		.num_ports	= 2,
		.base_baud	= 921600,
		.uart_offset	= 8,
	},
	[netmos_9xx5_combo] = {
		.flags		= FL_BASE0 | FL_BASE_BARS,
		.num_ports	= 1,
		.base_baud	= 115200,
		.uart_offset	= 8,
	},
	[netmos_9855] = {
		.flags		= FL_BASE2 | FL_BASE_BARS,
		.num_ports	= 1,
		.base_baud	= 115200,
		.uart_offset	= 8,
	},
	[netmos_9855_2p] = {
		.flags		= FL_BASE4 | FL_BASE_BARS,
		.num_ports	= 1,
		.base_baud	= 115200,
		.uart_offset	= 8,
	},
	[avlab_1s1p] = { /* n/t */
		.flags		= FL_BASE0 | FL_BASE_BARS,
		.num_ports	= 1,
		.base_baud	= 115200,
		.uart_offset	= 8,
	},
	[avlab_1s2p] = { /* n/t */
		.flags		= FL_BASE0 | FL_BASE_BARS,
		.num_ports	= 1,
		.base_baud	= 115200,
		.uart_offset	= 8,
	},
	[avlab_2s1p] = { /* n/t */
		.flags		= FL_BASE0 | FL_BASE_BARS,
		.num_ports	= 2,
		.base_baud	= 115200,
		.uart_offset	= 8,
	},
	[siig_1s1p_10x] = {
		.flags		= FL_BASE2,
		.num_ports	= 1,
		.base_baud	= 460800,
		.uart_offset	= 8,
	},
	[siig_2s1p_10x] = {
		.flags		= FL_BASE2,
		.num_ports	= 1,
		.base_baud	= 921600,
		.uart_offset	= 8,
	},
	[siig_2p1s_20x] = {
		.flags		= FL_BASE0,
		.num_ports	= 1,
		.base_baud	= 921600,
		.uart_offset	= 8,
	},
	[siig_1s1p_20x] = {
		.flags		= FL_BASE0,
		.num_ports	= 1,
		.base_baud	= 921600,
		.uart_offset	= 8,
	},
	[siig_2s1p_20x] = {
		.flags		= FL_BASE0,
		.num_ports	= 1,
		.base_baud	= 921600,
		.uart_offset	= 8,
	},
};

struct parport_serial_private {
	struct serial_private	*serial;
	int num_par;
	struct parport *port[PARPORT_MAX];
	struct parport_pc_pci par;
};

/* Register the serial port(s) of a PCI card. */
static int __devinit serial_register (struct pci_dev *dev,
				      const struct pci_device_id *id)
{
	struct parport_serial_private *priv = pci_get_drvdata (dev);
	struct pciserial_board *board;
	struct serial_private *serial;

	board = &pci_parport_serial_boards[id->driver_data];
	serial = pciserial_init_ports(dev, board);

	if (IS_ERR(serial))
		return PTR_ERR(serial);

	priv->serial = serial;
	return 0;
}

/* Register the parallel port(s) of a PCI card. */
static int __devinit parport_register (struct pci_dev *dev,
				       const struct pci_device_id *id)
{
	struct parport_pc_pci *card;
	struct parport_serial_private *priv = pci_get_drvdata (dev);
	int n, success = 0;

	priv->par = cards[id->driver_data];
	card = &priv->par;
	if (card->preinit_hook &&
	    card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
		return -ENODEV;

	for (n = 0; n < card->numports; n++) {
		struct parport *port;
		int lo = card->addr[n].lo;
		int hi = card->addr[n].hi;
		unsigned long io_lo, io_hi;
		int irq;

		if (priv->num_par == ARRAY_SIZE (priv->port)) {
			printk (KERN_WARNING
				"parport_serial: %s: only %zu parallel ports "
				"supported (%d reported)\n", pci_name (dev),
				ARRAY_SIZE(priv->port), card->numports);
			break;
		}

		io_lo = pci_resource_start (dev, lo);
		io_hi = 0;
		if ((hi >= 0) && (hi <= 6))
			io_hi = pci_resource_start (dev, hi);
		else if (hi > 6)
			io_lo += hi; /* Reinterpret the meaning of
                                        "hi" as an offset (see SYBA
                                        def.) */
		/* TODO: test if sharing interrupts works */
		irq = dev->irq;
		if (irq == IRQ_NONE) {
			dev_dbg(&dev->dev,
			"PCI parallel port detected: I/O at %#lx(%#lx)\n",
				io_lo, io_hi);
			irq = PARPORT_IRQ_NONE;
		} else {
			dev_dbg(&dev->dev,
		"PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
				io_lo, io_hi, irq);
			irq = PARPORT_IRQ_NONE;
		}
		port = parport_pc_probe_port (io_lo, io_hi, irq,
			      PARPORT_DMA_NONE, &dev->dev, IRQF_SHARED);
		if (port) {
			priv->port[priv->num_par++] = port;
			success = 1;
		}
	}

	if (card->postinit_hook)
		card->postinit_hook (dev, card, !success);

	return 0;
}

static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
					       const struct pci_device_id *id)
{
	struct parport_serial_private *priv;
	int err;

	priv = kzalloc (sizeof *priv, GFP_KERNEL);
	if (!priv)
		return -ENOMEM;
	pci_set_drvdata (dev, priv);

	err = pci_enable_device (dev);
	if (err) {
		pci_set_drvdata (dev, NULL);
		kfree (priv);
		return err;
	}

	if (parport_register (dev, id)) {
		pci_set_drvdata (dev, NULL);
		kfree (priv);
		return -ENODEV;
	}

	if (serial_register (dev, id)) {
		int i;
		for (i = 0; i < priv->num_par; i++)
			parport_pc_unregister_port (priv->port[i]);
		pci_set_drvdata (dev, NULL);
		kfree (priv);
		return -ENODEV;
	}

	return 0;
}

static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
{
	struct parport_serial_private *priv = pci_get_drvdata (dev);
	int i;

	pci_set_drvdata(dev, NULL);

	// Serial ports
	if (priv->serial)
		pciserial_remove_ports(priv->serial);

	// Parallel ports
	for (i = 0; i < priv->num_par; i++)
		parport_pc_unregister_port (priv->port[i]);

	kfree (priv);
	return;
}

#ifdef CONFIG_PM
static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state)
{
	struct parport_serial_private *priv = pci_get_drvdata(dev);

	if (priv->serial)
		pciserial_suspend_ports(priv->serial);

	/* FIXME: What about parport? */

	pci_save_state(dev);
	pci_set_power_state(dev, pci_choose_state(dev, state));
	return 0;
}

static int parport_serial_pci_resume(struct pci_dev *dev)
{
	struct parport_serial_private *priv = pci_get_drvdata(dev);
	int err;

	pci_set_power_state(dev, PCI_D0);
	pci_restore_state(dev);

	/*
	 * The device may have been disabled.  Re-enable it.
	 */
	err = pci_enable_device(dev);
	if (err) {
		printk(KERN_ERR "parport_serial: %s: error enabling "
			"device for resume (%d)\n", pci_name(dev), err);
		return err;
	}

	if (priv->serial)
		pciserial_resume_ports(priv->serial);

	/* FIXME: What about parport? */

	return 0;
}
#endif

static struct pci_driver parport_serial_pci_driver = {
	.name		= "parport_serial",
	.id_table	= parport_serial_pci_tbl,
	.probe		= parport_serial_pci_probe,
	.remove		= __devexit_p(parport_serial_pci_remove),
#ifdef CONFIG_PM
	.suspend	= parport_serial_pci_suspend,
	.resume		= parport_serial_pci_resume,
#endif
};


static int __init parport_serial_init (void)
{
	return pci_register_driver (&parport_serial_pci_driver);
}

static void __exit parport_serial_exit (void)
{
	pci_unregister_driver (&parport_serial_pci_driver);
	return;
}

MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
MODULE_LICENSE("GPL");

module_init(parport_serial_init);
module_exit(parport_serial_exit);
Commit	Line	Data
1da177e4 LT	1	/*
	2	* Support for common PCI multi-I/O cards (which is most of them)
	3	*
	4	* Copyright (C) 2001 Tim Waugh <twaugh@redhat.com>
	5	*
	6	* This program is free software; you can redistribute it and/or
	7	* modify it under the terms of the GNU General Public License
	8	* as published by the Free Software Foundation; either version
	9	* 2 of the License, or (at your option) any later version.
	10	*
	11	*
	12	* Multi-function PCI cards are supposed to present separate logical
	13	* devices on the bus. A common thing to do seems to be to just use
	14	* one logical device with lots of base address registers for both
	15	* parallel ports and serial ports. This driver is for dealing with
	16	* that.
	17	*
	18	*/
	19
	20	#include <linux/types.h>
	21	#include <linux/module.h>
	22	#include <linux/init.h>
5a0e3ad6	23	#include <linux/slab.h>
1da177e4	24	#include <linux/pci.h>
51dcdfec	25	#include <linux/interrupt.h>
1da177e4 LT	26	#include <linux/parport.h>
1da177e4 LT	27	#include <linux/parport_pc.h>
1da177e4 LT	28	#include <linux/8250_pci.h>
1da177e4 LT	29
1da177e4 LT	30	enum parport_pc_pci_cards {
	31	titan_110l = 0,
	32	titan_210l,
	33	netmos_9xx5_combo,
44e58a6a	34	netmos_9855,
50db9d8e	35	netmos_9855_2p,
1da177e4	36	avlab_1s1p,
1da177e4	37	avlab_1s2p,
1da177e4	38	avlab_2s1p,
1da177e4 LT	39	siig_1s1p_10x,
	40	siig_2s1p_10x,
	41	siig_2p1s_20x,
	42	siig_1s1p_20x,
	43	siig_2s1p_20x,
	44	};
	45
	46	/* each element directly indexed from enum list, above */
	47	struct parport_pc_pci {
	48	int numports;
	49	struct { /* BAR (base address registers) numbers in the config
	50	space header */
	51	int lo;
	52	int hi; /* -1 if not there, >6 for offset-method (max
	53	BAR is 6) */
	54	} addr[4];
	55
	56	/* If set, this is called immediately after pci_enable_device.
	57	* If it returns non-zero, no probing will take place and the
	58	* ports will not be used. */
	59	int (preinit_hook) (struct pci_dev pdev, struct parport_pc_pci *card,
	60	int autoirq, int autodma);
	61
	62	/* If set, this is called after probing for ports. If 'failed'
	63	* is non-zero we couldn't use any of the ports. */
	64	void (postinit_hook) (struct pci_dev pdev,
	65	struct parport_pc_pci *card, int failed);
	66	};
	67
50db9d8e	68	static int __devinit netmos_parallel_init(struct pci_dev dev, struct parport_pc_pci par, int autoirq, int autodma)
1da177e4	69	{
3abdbf90 JS	70	/* the rule described below doesn't hold for this device */
	71	if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
	72	dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
	73	dev->subsystem_device == 0x0299)
	74	return -ENODEV;
1da177e4 LT	75	/*
	76	* Netmos uses the subdevice ID to indicate the number of parallel
	77	* and serial ports. The form is 0x00PS, where <P> is the number of
	78	* parallel ports and <S> is the number of serial ports.
	79	*/
50db9d8e PDM	80	par->numports = (dev->subsystem_device & 0xf0) >> 4;
	81	if (par->numports > ARRAY_SIZE(par->addr))
	82	par->numports = ARRAY_SIZE(par->addr);
	83	/*
	84	* This function is currently only called for cards with up to
	85	* one parallel port.
	86	* Parallel port BAR is either before or after serial ports BARS;
	87	* hence, lo should be either 0 or equal to the number of serial ports.
	88	*/
	89	if (par->addr[0].lo != 0)
	90	par->addr[0].lo = dev->subsystem_device & 0xf;
1da177e4 LT	91	return 0;
	92	}
	93
	94	static struct parport_pc_pci cards[] __devinitdata = {
	95	/* titan_110l */ { 1, { { 3, -1 }, } },
	96	/* titan_210l */ { 1, { { 3, -1 }, } },
	97	/* netmos_9xx5_combo */ { 1, { { 2, -1 }, }, netmos_parallel_init },
50db9d8e PDM	98	/* netmos_9855 */ { 1, { { 0, -1 }, }, netmos_parallel_init },
50db9d8e PDM	99	/* netmos_9855_2p */ { 2, { { 0, -1 }, { 2, -1 }, } },
1da177e4	100	/* avlab_1s1p */ { 1, { { 1, 2}, } },
1da177e4	101	/* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} },
1da177e4	102	/* avlab_2s1p */ { 1, { { 2, 3}, } },
1da177e4 LT	103	/* siig_1s1p_10x */ { 1, { { 3, 4 }, } },
	104	/* siig_2s1p_10x */ { 1, { { 4, 5 }, } },
	105	/* siig_2p1s_20x */ { 2, { { 1, 2 }, { 3, 4 }, } },
	106	/* siig_1s1p_20x */ { 1, { { 1, 2 }, } },
	107	/* siig_2s1p_20x */ { 1, { { 2, 3 }, } },
	108	};
	109
	110	static struct pci_device_id parport_serial_pci_tbl[] = {
	111	/* PCI cards */
	112	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
	113	PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
	114	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
	115	PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
	116	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735,
	117	PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
	118	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9745,
	119	PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
	120	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
1da177e4 LT	121	PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
	122	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845,
	123	PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
50db9d8e PDM	124	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
	125	0x1000, 0x0020, 0, 0, netmos_9855_2p },
	126	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
	127	0x1000, 0x0022, 0, 0, netmos_9855_2p },
1da177e4	128	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
44e58a6a	129	PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
1da177e4	130	/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
91bca4b3 RK	131	{ PCI_VENDOR_ID_AFAVLAB, 0x2110,
	132	PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
	133	{ PCI_VENDOR_ID_AFAVLAB, 0x2111,
	134	PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
	135	{ PCI_VENDOR_ID_AFAVLAB, 0x2112,
	136	PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
	137	{ PCI_VENDOR_ID_AFAVLAB, 0x2140,
	138	PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
	139	{ PCI_VENDOR_ID_AFAVLAB, 0x2141,
	140	PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
	141	{ PCI_VENDOR_ID_AFAVLAB, 0x2142,
	142	PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
	143	{ PCI_VENDOR_ID_AFAVLAB, 0x2160,
	144	PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
	145	{ PCI_VENDOR_ID_AFAVLAB, 0x2161,
	146	PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
	147	{ PCI_VENDOR_ID_AFAVLAB, 0x2162,
	148	PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
1da177e4 LT	149	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
	150	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
	151	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
	152	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
	153	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
	154	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
	155	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
	156	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
	157	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
	158	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
	159	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
	160	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
	161	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
	162	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
	163	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
	164	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
	165	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
	166	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
	167	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
	168	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
	169	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
	170	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
	171	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
	172	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
	173	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
	174	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
	175	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
	176	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
	177	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
	178	PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
	179
	180	{ 0, } /* terminate list */
	181	};
	182	MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
	183
05caac58 RK	184	/*
	185	* This table describes the serial "geometry" of these boards. Any
	186	* quirks for these can be found in drivers/serial/8250_pci.c
	187	*
	188	* Cards not tested are marked n/t
	189	* If you have one of these cards and it works for you, please tell me..
	190	*/
	191	static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
	192	[titan_110l] = {
	193	.flags = FL_BASE1 \| FL_BASE_BARS,
	194	.num_ports = 1,
	195	.base_baud = 921600,
	196	.uart_offset = 8,
	197	},
	198	[titan_210l] = {
	199	.flags = FL_BASE1 \| FL_BASE_BARS,
	200	.num_ports = 2,
	201	.base_baud = 921600,
	202	.uart_offset = 8,
	203	},
	204	[netmos_9xx5_combo] = {
	205	.flags = FL_BASE0 \| FL_BASE_BARS,
	206	.num_ports = 1,
	207	.base_baud = 115200,
	208	.uart_offset = 8,
	209	},
	210	[netmos_9855] = {
50db9d8e PDM	211	.flags = FL_BASE2 \| FL_BASE_BARS,
	212	.num_ports = 1,
	213	.base_baud = 115200,
	214	.uart_offset = 8,
	215	},
	216	[netmos_9855_2p] = {
c01106e5	217	.flags = FL_BASE4 \| FL_BASE_BARS,
05caac58 RK	218	.num_ports = 1,
	219	.base_baud = 115200,
	220	.uart_offset = 8,
	221	},
	222	[avlab_1s1p] = { /* n/t */
	223	.flags = FL_BASE0 \| FL_BASE_BARS,
	224	.num_ports = 1,
	225	.base_baud = 115200,
	226	.uart_offset = 8,
	227	},
05caac58 RK	228	[avlab_1s2p] = { /* n/t */
	229	.flags = FL_BASE0 \| FL_BASE_BARS,
	230	.num_ports = 1,
	231	.base_baud = 115200,
	232	.uart_offset = 8,
	233	},
05caac58 RK	234	[avlab_2s1p] = { /* n/t */
	235	.flags = FL_BASE0 \| FL_BASE_BARS,
	236	.num_ports = 2,
	237	.base_baud = 115200,
	238	.uart_offset = 8,
	239	},
05caac58 RK	240	[siig_1s1p_10x] = {
	241	.flags = FL_BASE2,
	242	.num_ports = 1,
	243	.base_baud = 460800,
	244	.uart_offset = 8,
	245	},
	246	[siig_2s1p_10x] = {
	247	.flags = FL_BASE2,
	248	.num_ports = 1,
	249	.base_baud = 921600,
	250	.uart_offset = 8,
	251	},
	252	[siig_2p1s_20x] = {
	253	.flags = FL_BASE0,
	254	.num_ports = 1,
	255	.base_baud = 921600,
	256	.uart_offset = 8,
	257	},
	258	[siig_1s1p_20x] = {
	259	.flags = FL_BASE0,
	260	.num_ports = 1,
	261	.base_baud = 921600,
	262	.uart_offset = 8,
	263	},
	264	[siig_2s1p_20x] = {
	265	.flags = FL_BASE0,
	266	.num_ports = 1,
	267	.base_baud = 921600,
	268	.uart_offset = 8,
	269	},
1da177e4 LT	270	};
	271
	272	struct parport_serial_private {
05caac58	273	struct serial_private *serial;
1da177e4 LT	274	int num_par;
	275	struct parport *port[PARPORT_MAX];
	276	struct parport_pc_pci par;
	277	};
	278
1da177e4 LT	279	/* Register the serial port(s) of a PCI card. */
	280	static int __devinit serial_register (struct pci_dev *dev,
	281	const struct pci_device_id *id)
	282	{
1da177e4	283	struct parport_serial_private *priv = pci_get_drvdata (dev);
05caac58 RK	284	struct pciserial_board *board;
05caac58 RK	285	struct serial_private *serial;
1da177e4	286
05caac58 RK	287	board = &pci_parport_serial_boards[id->driver_data];
05caac58 RK	288	serial = pciserial_init_ports(dev, board);
1da177e4	289
05caac58 RK	290	if (IS_ERR(serial))
05caac58 RK	291	return PTR_ERR(serial);
1da177e4	292
05caac58 RK	293	priv->serial = serial;
05caac58 RK	294	return 0;
1da177e4 LT	295	}
	296
	297	/* Register the parallel port(s) of a PCI card. */
	298	static int __devinit parport_register (struct pci_dev *dev,
	299	const struct pci_device_id *id)
	300	{
	301	struct parport_pc_pci *card;
	302	struct parport_serial_private *priv = pci_get_drvdata (dev);
7a171cdc	303	int n, success = 0;
1da177e4 LT	304
	305	priv->par = cards[id->driver_data];
	306	card = &priv->par;
	307	if (card->preinit_hook &&
	308	card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
	309	return -ENODEV;
	310
	311	for (n = 0; n < card->numports; n++) {
	312	struct parport *port;
	313	int lo = card->addr[n].lo;
	314	int hi = card->addr[n].hi;
	315	unsigned long io_lo, io_hi;
51dcdfec	316	int irq;
1da177e4 LT	317
	318	if (priv->num_par == ARRAY_SIZE (priv->port)) {
	319	printk (KERN_WARNING
f4f64e9d	320	"parport_serial: %s: only %zu parallel ports "
1da177e4	321	"supported (%d reported)\n", pci_name (dev),
f4f64e9d	322	ARRAY_SIZE(priv->port), card->numports);
1da177e4 LT	323	break;
	324	}
	325
	326	io_lo = pci_resource_start (dev, lo);
	327	io_hi = 0;
	328	if ((hi >= 0) && (hi <= 6))
	329	io_hi = pci_resource_start (dev, hi);
	330	else if (hi > 6)
	331	io_lo += hi; /* Reinterpret the meaning of
	332	"hi" as an offset (see SYBA
	333	def.) */
	334	/* TODO: test if sharing interrupts works */
51dcdfec AC	335	irq = dev->irq;
	336	if (irq == IRQ_NONE) {
	337	dev_dbg(&dev->dev,
	338	"PCI parallel port detected: I/O at %#lx(%#lx)\n",
	339	io_lo, io_hi);
	340	irq = PARPORT_IRQ_NONE;
	341	} else {
	342	dev_dbg(&dev->dev,
	343	"PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
	344	io_lo, io_hi, irq);
	345	irq = PARPORT_IRQ_NONE;
	346	}
	347	port = parport_pc_probe_port (io_lo, io_hi, irq,
	348	PARPORT_DMA_NONE, &dev->dev, IRQF_SHARED);
1da177e4 LT	349	if (port) {
	350	priv->port[priv->num_par++] = port;
	351	success = 1;
	352	}
	353	}
	354
	355	if (card->postinit_hook)
	356	card->postinit_hook (dev, card, !success);
	357
7a171cdc	358	return 0;
1da177e4 LT	359	}
	360
	361	static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
	362	const struct pci_device_id *id)
	363	{
	364	struct parport_serial_private *priv;
	365	int err;
	366
dd00cc48	367	priv = kzalloc (sizeof *priv, GFP_KERNEL);
1da177e4 LT	368	if (!priv)
1da177e4 LT	369	return -ENOMEM;
1da177e4 LT	370	pci_set_drvdata (dev, priv);
	371
	372	err = pci_enable_device (dev);
	373	if (err) {
	374	pci_set_drvdata (dev, NULL);
	375	kfree (priv);
	376	return err;
	377	}
	378
	379	if (parport_register (dev, id)) {
	380	pci_set_drvdata (dev, NULL);
	381	kfree (priv);
	382	return -ENODEV;
	383	}
	384
	385	if (serial_register (dev, id)) {
	386	int i;
	387	for (i = 0; i < priv->num_par; i++)
	388	parport_pc_unregister_port (priv->port[i]);
	389	pci_set_drvdata (dev, NULL);
	390	kfree (priv);
	391	return -ENODEV;
	392	}
	393
	394	return 0;
	395	}
	396
	397	static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
	398	{
	399	struct parport_serial_private *priv = pci_get_drvdata (dev);
	400	int i;
	401
05caac58 RK	402	pci_set_drvdata(dev, NULL);
05caac58 RK	403
1da177e4	404	// Serial ports
05caac58 RK	405	if (priv->serial)
05caac58 RK	406	pciserial_remove_ports(priv->serial);
1da177e4	407
1da177e4 LT	408	// Parallel ports
	409	for (i = 0; i < priv->num_par; i++)
	410	parport_pc_unregister_port (priv->port[i]);
	411
	412	kfree (priv);
	413	return;
	414	}
	415
7dd7d691	416	#ifdef CONFIG_PM
05caac58 RK	417	static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state)
	418	{
	419	struct parport_serial_private *priv = pci_get_drvdata(dev);
	420
	421	if (priv->serial)
	422	pciserial_suspend_ports(priv->serial);
	423
	424	/* FIXME: What about parport? */
	425
	426	pci_save_state(dev);
	427	pci_set_power_state(dev, pci_choose_state(dev, state));
	428	return 0;
	429	}
	430
	431	static int parport_serial_pci_resume(struct pci_dev *dev)
	432	{
	433	struct parport_serial_private *priv = pci_get_drvdata(dev);
10f8a598	434	int err;
05caac58 RK	435
	436	pci_set_power_state(dev, PCI_D0);
	437	pci_restore_state(dev);
	438
	439	/*
	440	* The device may have been disabled. Re-enable it.
	441	*/
10f8a598 RD	442	err = pci_enable_device(dev);
	443	if (err) {
	444	printk(KERN_ERR "parport_serial: %s: error enabling "
	445	"device for resume (%d)\n", pci_name(dev), err);
	446	return err;
	447	}
05caac58 RK	448
	449	if (priv->serial)
	450	pciserial_resume_ports(priv->serial);
	451
	452	/* FIXME: What about parport? */
	453
	454	return 0;
	455	}
7dd7d691	456	#endif
05caac58	457
1da177e4 LT	458	static struct pci_driver parport_serial_pci_driver = {
	459	.name = "parport_serial",
	460	.id_table = parport_serial_pci_tbl,
	461	.probe = parport_serial_pci_probe,
	462	.remove = __devexit_p(parport_serial_pci_remove),
7dd7d691	463	#ifdef CONFIG_PM
05caac58 RK	464	.suspend = parport_serial_pci_suspend,
05caac58 RK	465	.resume = parport_serial_pci_resume,
7dd7d691	466	#endif
1da177e4 LT	467	};
	468
	469
	470	static int __init parport_serial_init (void)
	471	{
93b47684	472	return pci_register_driver (&parport_serial_pci_driver);
1da177e4 LT	473	}
	474
	475	static void __exit parport_serial_exit (void)
	476	{
	477	pci_unregister_driver (&parport_serial_pci_driver);
	478	return;
	479	}
	480
	481	MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
	482	MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
	483	MODULE_LICENSE("GPL");
	484
	485	module_init(parport_serial_init);
	486	module_exit(parport_serial_exit);