Commit | Line | Data |
---|---|---|
876c9d3a MT |
1 | /** |
2 | * Functions implementing wlan scan IOCTL and firmware command APIs | |
3 | * | |
4 | * IOCTL handlers as well as command preperation and response routines | |
5 | * for sending scan commands to the firmware. | |
6 | */ | |
7 | #include <linux/ctype.h> | |
8 | #include <linux/if.h> | |
9 | #include <linux/netdevice.h> | |
10 | #include <linux/wireless.h> | |
fcdb53db | 11 | #include <linux/etherdevice.h> |
876c9d3a MT |
12 | |
13 | #include <net/ieee80211.h> | |
14 | #include <net/iw_handler.h> | |
15 | ||
16 | #include "host.h" | |
17 | #include "decl.h" | |
18 | #include "dev.h" | |
19 | #include "scan.h" | |
20 | ||
21 | //! Approximate amount of data needed to pass a scan result back to iwlist | |
22 | #define MAX_SCAN_CELL_SIZE (IW_EV_ADDR_LEN \ | |
23 | + IW_ESSID_MAX_SIZE \ | |
24 | + IW_EV_UINT_LEN \ | |
25 | + IW_EV_FREQ_LEN \ | |
26 | + IW_EV_QUAL_LEN \ | |
27 | + IW_ESSID_MAX_SIZE \ | |
28 | + IW_EV_PARAM_LEN \ | |
29 | + 40) /* 40 for WPAIE */ | |
30 | ||
31 | //! Memory needed to store a max sized channel List TLV for a firmware scan | |
32 | #define CHAN_TLV_MAX_SIZE (sizeof(struct mrvlietypesheader) \ | |
33 | + (MRVDRV_MAX_CHANNELS_PER_SCAN \ | |
34 | * sizeof(struct chanscanparamset))) | |
35 | ||
36 | //! Memory needed to store a max number/size SSID TLV for a firmware scan | |
37 | #define SSID_TLV_MAX_SIZE (1 * sizeof(struct mrvlietypes_ssidparamset)) | |
38 | ||
39 | //! Maximum memory needed for a wlan_scan_cmd_config with all TLVs at max | |
40 | #define MAX_SCAN_CFG_ALLOC (sizeof(struct wlan_scan_cmd_config) \ | |
41 | + sizeof(struct mrvlietypes_numprobes) \ | |
42 | + CHAN_TLV_MAX_SIZE \ | |
43 | + SSID_TLV_MAX_SIZE) | |
44 | ||
45 | //! The maximum number of channels the firmware can scan per command | |
46 | #define MRVDRV_MAX_CHANNELS_PER_SCAN 14 | |
47 | ||
48 | /** | |
49 | * @brief Number of channels to scan per firmware scan command issuance. | |
50 | * | |
51 | * Number restricted to prevent hitting the limit on the amount of scan data | |
52 | * returned in a single firmware scan command. | |
53 | */ | |
54 | #define MRVDRV_CHANNELS_PER_SCAN_CMD 4 | |
55 | ||
56 | //! Scan time specified in the channel TLV for each channel for passive scans | |
57 | #define MRVDRV_PASSIVE_SCAN_CHAN_TIME 100 | |
58 | ||
59 | //! Scan time specified in the channel TLV for each channel for active scans | |
60 | #define MRVDRV_ACTIVE_SCAN_CHAN_TIME 100 | |
61 | ||
123e0e04 DW |
62 | static const u8 zeromac[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
63 | static const u8 bcastmac[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; | |
eb8f7330 | 64 | |
fcdb53db DW |
65 | static inline void clear_bss_descriptor (struct bss_descriptor * bss) |
66 | { | |
67 | /* Don't blow away ->list, just BSS data */ | |
68 | memset(bss, 0, offsetof(struct bss_descriptor, list)); | |
69 | } | |
70 | ||
71 | static inline int match_bss_no_security(struct wlan_802_11_security * secinfo, | |
72 | struct bss_descriptor * match_bss) | |
73 | { | |
74 | if ( !secinfo->wep_enabled | |
75 | && !secinfo->WPAenabled | |
76 | && !secinfo->WPA2enabled | |
77 | && match_bss->wpa_ie[0] != WPA_IE | |
78 | && match_bss->rsn_ie[0] != WPA2_IE | |
0c9ca690 | 79 | && !(match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { |
fcdb53db DW |
80 | return 1; |
81 | } | |
82 | return 0; | |
83 | } | |
84 | ||
85 | static inline int match_bss_static_wep(struct wlan_802_11_security * secinfo, | |
86 | struct bss_descriptor * match_bss) | |
87 | { | |
88 | if ( secinfo->wep_enabled | |
89 | && !secinfo->WPAenabled | |
90 | && !secinfo->WPA2enabled | |
0c9ca690 | 91 | && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { |
fcdb53db DW |
92 | return 1; |
93 | } | |
94 | return 0; | |
95 | } | |
96 | ||
97 | static inline int match_bss_wpa(struct wlan_802_11_security * secinfo, | |
98 | struct bss_descriptor * match_bss) | |
99 | { | |
100 | if ( !secinfo->wep_enabled | |
101 | && secinfo->WPAenabled | |
fcdb53db DW |
102 | && (match_bss->wpa_ie[0] == WPA_IE) |
103 | /* privacy bit may NOT be set in some APs like LinkSys WRT54G | |
0c9ca690 DW |
104 | && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { |
105 | */ | |
fcdb53db DW |
106 | ) { |
107 | return 1; | |
108 | } | |
109 | return 0; | |
110 | } | |
111 | ||
112 | static inline int match_bss_wpa2(struct wlan_802_11_security * secinfo, | |
113 | struct bss_descriptor * match_bss) | |
114 | { | |
115 | if ( !secinfo->wep_enabled | |
fcdb53db DW |
116 | && secinfo->WPA2enabled |
117 | && (match_bss->rsn_ie[0] == WPA2_IE) | |
118 | /* privacy bit may NOT be set in some APs like LinkSys WRT54G | |
0c9ca690 DW |
119 | && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { |
120 | */ | |
fcdb53db DW |
121 | ) { |
122 | return 1; | |
123 | } | |
124 | return 0; | |
125 | } | |
126 | ||
127 | static inline int match_bss_dynamic_wep(struct wlan_802_11_security * secinfo, | |
128 | struct bss_descriptor * match_bss) | |
129 | { | |
130 | if ( !secinfo->wep_enabled | |
131 | && !secinfo->WPAenabled | |
132 | && !secinfo->WPA2enabled | |
133 | && (match_bss->wpa_ie[0] != WPA_IE) | |
134 | && (match_bss->rsn_ie[0] != WPA2_IE) | |
0c9ca690 | 135 | && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { |
fcdb53db DW |
136 | return 1; |
137 | } | |
138 | return 0; | |
139 | } | |
876c9d3a MT |
140 | |
141 | /** | |
142 | * @brief Check if a scanned network compatible with the driver settings | |
143 | * | |
144 | * WEP WPA WPA2 ad-hoc encrypt Network | |
145 | * enabled enabled enabled AES mode privacy WPA WPA2 Compatible | |
146 | * 0 0 0 0 NONE 0 0 0 yes No security | |
147 | * 1 0 0 0 NONE 1 0 0 yes Static WEP | |
148 | * 0 1 0 0 x 1x 1 x yes WPA | |
149 | * 0 0 1 0 x 1x x 1 yes WPA2 | |
150 | * 0 0 0 1 NONE 1 0 0 yes Ad-hoc AES | |
151 | * 0 0 0 0 !=NONE 1 0 0 yes Dynamic WEP | |
152 | * | |
153 | * | |
154 | * @param adapter A pointer to wlan_adapter | |
155 | * @param index Index in scantable to check against current driver settings | |
156 | * @param mode Network mode: Infrastructure or IBSS | |
157 | * | |
158 | * @return Index in scantable, or error code if negative | |
159 | */ | |
fcdb53db DW |
160 | static int is_network_compatible(wlan_adapter * adapter, |
161 | struct bss_descriptor * bss, u8 mode) | |
876c9d3a | 162 | { |
fcdb53db DW |
163 | int matched = 0; |
164 | ||
9012b28a | 165 | lbs_deb_enter(LBS_DEB_ASSOC); |
876c9d3a | 166 | |
fcdb53db DW |
167 | if (bss->mode != mode) |
168 | goto done; | |
876c9d3a | 169 | |
fcdb53db DW |
170 | if ((matched = match_bss_no_security(&adapter->secinfo, bss))) { |
171 | goto done; | |
172 | } else if ((matched = match_bss_static_wep(&adapter->secinfo, bss))) { | |
173 | goto done; | |
174 | } else if ((matched = match_bss_wpa(&adapter->secinfo, bss))) { | |
175 | lbs_deb_scan( | |
176 | "is_network_compatible() WPA: wpa_ie=%#x " | |
177 | "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s " | |
178 | "privacy=%#x\n", bss->wpa_ie[0], bss->rsn_ie[0], | |
889c05bd DW |
179 | adapter->secinfo.wep_enabled ? "e" : "d", |
180 | adapter->secinfo.WPAenabled ? "e" : "d", | |
181 | adapter->secinfo.WPA2enabled ? "e" : "d", | |
0c9ca690 | 182 | (bss->capability & WLAN_CAPABILITY_PRIVACY)); |
fcdb53db DW |
183 | goto done; |
184 | } else if ((matched = match_bss_wpa2(&adapter->secinfo, bss))) { | |
185 | lbs_deb_scan( | |
186 | "is_network_compatible() WPA2: wpa_ie=%#x " | |
187 | "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s " | |
188 | "privacy=%#x\n", bss->wpa_ie[0], bss->rsn_ie[0], | |
189 | adapter->secinfo.wep_enabled ? "e" : "d", | |
190 | adapter->secinfo.WPAenabled ? "e" : "d", | |
191 | adapter->secinfo.WPA2enabled ? "e" : "d", | |
0c9ca690 | 192 | (bss->capability & WLAN_CAPABILITY_PRIVACY)); |
fcdb53db DW |
193 | goto done; |
194 | } else if ((matched = match_bss_dynamic_wep(&adapter->secinfo, bss))) { | |
195 | lbs_deb_scan( | |
196 | "is_network_compatible() dynamic WEP: " | |
197 | "wpa_ie=%#x wpa2_ie=%#x privacy=%#x\n", | |
0c9ca690 DW |
198 | bss->wpa_ie[0], bss->rsn_ie[0], |
199 | (bss->capability & WLAN_CAPABILITY_PRIVACY)); | |
9012b28a | 200 | goto done; |
876c9d3a MT |
201 | } |
202 | ||
fcdb53db DW |
203 | /* bss security settings don't match those configured on card */ |
204 | lbs_deb_scan( | |
205 | "is_network_compatible() FAILED: wpa_ie=%#x " | |
206 | "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s privacy=%#x\n", | |
207 | bss->wpa_ie[0], bss->rsn_ie[0], | |
208 | adapter->secinfo.wep_enabled ? "e" : "d", | |
209 | adapter->secinfo.WPAenabled ? "e" : "d", | |
210 | adapter->secinfo.WPA2enabled ? "e" : "d", | |
0c9ca690 | 211 | (bss->capability & WLAN_CAPABILITY_PRIVACY)); |
9012b28a HS |
212 | |
213 | done: | |
fcdb53db DW |
214 | lbs_deb_leave(LBS_DEB_SCAN); |
215 | return matched; | |
876c9d3a MT |
216 | } |
217 | ||
876c9d3a MT |
218 | /** |
219 | * @brief Create a channel list for the driver to scan based on region info | |
220 | * | |
221 | * Use the driver region/band information to construct a comprehensive list | |
222 | * of channels to scan. This routine is used for any scan that is not | |
223 | * provided a specific channel list to scan. | |
224 | * | |
225 | * @param priv A pointer to wlan_private structure | |
226 | * @param scanchanlist Output parameter: resulting channel list to scan | |
227 | * @param filteredscan Flag indicating whether or not a BSSID or SSID filter | |
228 | * is being sent in the command to firmware. Used to | |
229 | * increase the number of channels sent in a scan | |
230 | * command and to disable the firmware channel scan | |
231 | * filter. | |
232 | * | |
233 | * @return void | |
234 | */ | |
235 | static void wlan_scan_create_channel_list(wlan_private * priv, | |
236 | struct chanscanparamset * scanchanlist, | |
237 | u8 filteredscan) | |
238 | { | |
239 | ||
240 | wlan_adapter *adapter = priv->adapter; | |
241 | struct region_channel *scanregion; | |
242 | struct chan_freq_power *cfp; | |
243 | int rgnidx; | |
244 | int chanidx; | |
245 | int nextchan; | |
246 | u8 scantype; | |
247 | ||
248 | chanidx = 0; | |
249 | ||
250 | /* Set the default scan type to the user specified type, will later | |
251 | * be changed to passive on a per channel basis if restricted by | |
252 | * regulatory requirements (11d or 11h) | |
253 | */ | |
254 | scantype = adapter->scantype; | |
255 | ||
256 | for (rgnidx = 0; rgnidx < ARRAY_SIZE(adapter->region_channel); rgnidx++) { | |
257 | if (priv->adapter->enable11d && | |
258 | adapter->connect_status != libertas_connected) { | |
259 | /* Scan all the supported chan for the first scan */ | |
260 | if (!adapter->universal_channel[rgnidx].valid) | |
261 | continue; | |
262 | scanregion = &adapter->universal_channel[rgnidx]; | |
263 | ||
264 | /* clear the parsed_region_chan for the first scan */ | |
265 | memset(&adapter->parsed_region_chan, 0x00, | |
266 | sizeof(adapter->parsed_region_chan)); | |
267 | } else { | |
268 | if (!adapter->region_channel[rgnidx].valid) | |
269 | continue; | |
270 | scanregion = &adapter->region_channel[rgnidx]; | |
271 | } | |
272 | ||
273 | for (nextchan = 0; | |
274 | nextchan < scanregion->nrcfp; nextchan++, chanidx++) { | |
275 | ||
276 | cfp = scanregion->CFP + nextchan; | |
277 | ||
278 | if (priv->adapter->enable11d) { | |
279 | scantype = | |
280 | libertas_get_scan_type_11d(cfp->channel, | |
281 | &adapter-> | |
282 | parsed_region_chan); | |
283 | } | |
284 | ||
285 | switch (scanregion->band) { | |
286 | case BAND_B: | |
287 | case BAND_G: | |
288 | default: | |
289 | scanchanlist[chanidx].radiotype = | |
290 | cmd_scan_radio_type_bg; | |
291 | break; | |
292 | } | |
293 | ||
294 | if (scantype == cmd_scan_type_passive) { | |
295 | scanchanlist[chanidx].maxscantime = | |
981f187b | 296 | cpu_to_le16(MRVDRV_PASSIVE_SCAN_CHAN_TIME); |
876c9d3a MT |
297 | scanchanlist[chanidx].chanscanmode.passivescan = |
298 | 1; | |
299 | } else { | |
300 | scanchanlist[chanidx].maxscantime = | |
981f187b | 301 | cpu_to_le16(MRVDRV_ACTIVE_SCAN_CHAN_TIME); |
876c9d3a MT |
302 | scanchanlist[chanidx].chanscanmode.passivescan = |
303 | 0; | |
304 | } | |
305 | ||
306 | scanchanlist[chanidx].channumber = cfp->channel; | |
307 | ||
308 | if (filteredscan) { | |
309 | scanchanlist[chanidx].chanscanmode. | |
310 | disablechanfilt = 1; | |
311 | } | |
312 | } | |
313 | } | |
314 | } | |
315 | ||
316 | /** | |
317 | * @brief Construct a wlan_scan_cmd_config structure to use in issue scan cmds | |
318 | * | |
319 | * Application layer or other functions can invoke wlan_scan_networks | |
320 | * with a scan configuration supplied in a wlan_ioctl_user_scan_cfg struct. | |
321 | * This structure is used as the basis of one or many wlan_scan_cmd_config | |
322 | * commands that are sent to the command processing module and sent to | |
323 | * firmware. | |
324 | * | |
325 | * Create a wlan_scan_cmd_config based on the following user supplied | |
326 | * parameters (if present): | |
327 | * - SSID filter | |
328 | * - BSSID filter | |
329 | * - Number of Probes to be sent | |
330 | * - channel list | |
331 | * | |
332 | * If the SSID or BSSID filter is not present, disable/clear the filter. | |
333 | * If the number of probes is not set, use the adapter default setting | |
334 | * Qualify the channel | |
335 | * | |
336 | * @param priv A pointer to wlan_private structure | |
337 | * @param puserscanin NULL or pointer to scan configuration parameters | |
338 | * @param ppchantlvout Output parameter: Pointer to the start of the | |
339 | * channel TLV portion of the output scan config | |
340 | * @param pscanchanlist Output parameter: Pointer to the resulting channel | |
341 | * list to scan | |
342 | * @param pmaxchanperscan Output parameter: Number of channels to scan for | |
343 | * each issuance of the firmware scan command | |
344 | * @param pfilteredscan Output parameter: Flag indicating whether or not | |
345 | * a BSSID or SSID filter is being sent in the | |
346 | * command to firmware. Used to increase the number | |
347 | * of channels sent in a scan command and to | |
348 | * disable the firmware channel scan filter. | |
349 | * @param pscancurrentonly Output parameter: Flag indicating whether or not | |
350 | * we are only scanning our current active channel | |
351 | * | |
352 | * @return resulting scan configuration | |
353 | */ | |
354 | static struct wlan_scan_cmd_config * | |
355 | wlan_scan_setup_scan_config(wlan_private * priv, | |
356 | const struct wlan_ioctl_user_scan_cfg * puserscanin, | |
357 | struct mrvlietypes_chanlistparamset ** ppchantlvout, | |
358 | struct chanscanparamset * pscanchanlist, | |
359 | int *pmaxchanperscan, | |
360 | u8 * pfilteredscan, | |
361 | u8 * pscancurrentonly) | |
362 | { | |
363 | wlan_adapter *adapter = priv->adapter; | |
876c9d3a MT |
364 | struct mrvlietypes_numprobes *pnumprobestlv; |
365 | struct mrvlietypes_ssidparamset *pssidtlv; | |
366 | struct wlan_scan_cmd_config * pscancfgout = NULL; | |
367 | u8 *ptlvpos; | |
368 | u16 numprobes; | |
876c9d3a MT |
369 | int chanidx; |
370 | int scantype; | |
371 | int scandur; | |
372 | int channel; | |
373 | int radiotype; | |
374 | ||
375 | pscancfgout = kzalloc(MAX_SCAN_CFG_ALLOC, GFP_KERNEL); | |
376 | if (pscancfgout == NULL) | |
377 | goto out; | |
378 | ||
379 | /* The tlvbufferlen is calculated for each scan command. The TLVs added | |
380 | * in this routine will be preserved since the routine that sends | |
381 | * the command will append channelTLVs at *ppchantlvout. The difference | |
382 | * between the *ppchantlvout and the tlvbuffer start will be used | |
383 | * to calculate the size of anything we add in this routine. | |
384 | */ | |
385 | pscancfgout->tlvbufferlen = 0; | |
386 | ||
387 | /* Running tlv pointer. Assigned to ppchantlvout at end of function | |
388 | * so later routines know where channels can be added to the command buf | |
389 | */ | |
390 | ptlvpos = pscancfgout->tlvbuffer; | |
391 | ||
392 | /* | |
393 | * Set the initial scan paramters for progressive scanning. If a specific | |
394 | * BSSID or SSID is used, the number of channels in the scan command | |
395 | * will be increased to the absolute maximum | |
396 | */ | |
397 | *pmaxchanperscan = MRVDRV_CHANNELS_PER_SCAN_CMD; | |
398 | ||
399 | /* Initialize the scan as un-filtered by firmware, set to TRUE below if | |
400 | * a SSID or BSSID filter is sent in the command | |
401 | */ | |
402 | *pfilteredscan = 0; | |
403 | ||
404 | /* Initialize the scan as not being only on the current channel. If | |
405 | * the channel list is customized, only contains one channel, and | |
406 | * is the active channel, this is set true and data flow is not halted. | |
407 | */ | |
408 | *pscancurrentonly = 0; | |
409 | ||
410 | if (puserscanin) { | |
411 | ||
412 | /* Set the bss type scan filter, use adapter setting if unset */ | |
413 | pscancfgout->bsstype = | |
414 | (puserscanin->bsstype ? puserscanin->bsstype : adapter-> | |
415 | scanmode); | |
416 | ||
417 | /* Set the number of probes to send, use adapter setting if unset */ | |
418 | numprobes = (puserscanin->numprobes ? puserscanin->numprobes : | |
419 | adapter->scanprobes); | |
420 | ||
421 | /* | |
422 | * Set the BSSID filter to the incoming configuration, | |
423 | * if non-zero. If not set, it will remain disabled (all zeros). | |
424 | */ | |
eb8f7330 DW |
425 | memcpy(pscancfgout->bssid, puserscanin->bssid, |
426 | sizeof(pscancfgout->bssid)); | |
876c9d3a | 427 | |
eb8f7330 | 428 | if (puserscanin->ssid_len) { |
876c9d3a MT |
429 | pssidtlv = |
430 | (struct mrvlietypes_ssidparamset *) pscancfgout-> | |
431 | tlvbuffer; | |
432 | pssidtlv->header.type = cpu_to_le16(TLV_TYPE_SSID); | |
eb8f7330 DW |
433 | pssidtlv->header.len = cpu_to_le16(puserscanin->ssid_len); |
434 | memcpy(pssidtlv->ssid, puserscanin->ssid, | |
435 | puserscanin->ssid_len); | |
436 | ptlvpos += sizeof(pssidtlv->header) + puserscanin->ssid_len; | |
876c9d3a MT |
437 | } |
438 | ||
439 | /* | |
440 | * The default number of channels sent in the command is low to | |
441 | * ensure the response buffer from the firmware does not truncate | |
442 | * scan results. That is not an issue with an SSID or BSSID | |
443 | * filter applied to the scan results in the firmware. | |
444 | */ | |
eb8f7330 DW |
445 | if ( puserscanin->ssid_len |
446 | || (compare_ether_addr(pscancfgout->bssid, &zeromac[0]) != 0)) { | |
876c9d3a MT |
447 | *pmaxchanperscan = MRVDRV_MAX_CHANNELS_PER_SCAN; |
448 | *pfilteredscan = 1; | |
449 | } | |
450 | } else { | |
451 | pscancfgout->bsstype = adapter->scanmode; | |
452 | numprobes = adapter->scanprobes; | |
453 | } | |
454 | ||
455 | /* If the input config or adapter has the number of Probes set, add tlv */ | |
456 | if (numprobes) { | |
457 | pnumprobestlv = (struct mrvlietypes_numprobes *) ptlvpos; | |
981f187b DW |
458 | pnumprobestlv->header.type = cpu_to_le16(TLV_TYPE_NUMPROBES); |
459 | pnumprobestlv->header.len = cpu_to_le16(2); | |
876c9d3a MT |
460 | pnumprobestlv->numprobes = cpu_to_le16(numprobes); |
461 | ||
981f187b | 462 | ptlvpos += sizeof(*pnumprobestlv); |
876c9d3a MT |
463 | } |
464 | ||
465 | /* | |
466 | * Set the output for the channel TLV to the address in the tlv buffer | |
467 | * past any TLVs that were added in this fuction (SSID, numprobes). | |
468 | * channel TLVs will be added past this for each scan command, preserving | |
469 | * the TLVs that were previously added. | |
470 | */ | |
471 | *ppchantlvout = (struct mrvlietypes_chanlistparamset *) ptlvpos; | |
472 | ||
473 | if (puserscanin && puserscanin->chanlist[0].channumber) { | |
474 | ||
9012b28a | 475 | lbs_deb_scan("Scan: Using supplied channel list\n"); |
876c9d3a MT |
476 | |
477 | for (chanidx = 0; | |
478 | chanidx < WLAN_IOCTL_USER_SCAN_CHAN_MAX | |
479 | && puserscanin->chanlist[chanidx].channumber; chanidx++) { | |
480 | ||
481 | channel = puserscanin->chanlist[chanidx].channumber; | |
482 | (pscanchanlist + chanidx)->channumber = channel; | |
483 | ||
484 | radiotype = puserscanin->chanlist[chanidx].radiotype; | |
485 | (pscanchanlist + chanidx)->radiotype = radiotype; | |
486 | ||
487 | scantype = puserscanin->chanlist[chanidx].scantype; | |
488 | ||
489 | if (scantype == cmd_scan_type_passive) { | |
490 | (pscanchanlist + | |
491 | chanidx)->chanscanmode.passivescan = 1; | |
492 | } else { | |
493 | (pscanchanlist + | |
494 | chanidx)->chanscanmode.passivescan = 0; | |
495 | } | |
496 | ||
497 | if (puserscanin->chanlist[chanidx].scantime) { | |
498 | scandur = | |
499 | puserscanin->chanlist[chanidx].scantime; | |
500 | } else { | |
501 | if (scantype == cmd_scan_type_passive) { | |
502 | scandur = MRVDRV_PASSIVE_SCAN_CHAN_TIME; | |
503 | } else { | |
504 | scandur = MRVDRV_ACTIVE_SCAN_CHAN_TIME; | |
505 | } | |
506 | } | |
507 | ||
508 | (pscanchanlist + chanidx)->minscantime = | |
509 | cpu_to_le16(scandur); | |
510 | (pscanchanlist + chanidx)->maxscantime = | |
511 | cpu_to_le16(scandur); | |
512 | } | |
513 | ||
514 | /* Check if we are only scanning the current channel */ | |
515 | if ((chanidx == 1) && (puserscanin->chanlist[0].channumber | |
516 | == | |
517 | priv->adapter->curbssparams.channel)) { | |
518 | *pscancurrentonly = 1; | |
9012b28a | 519 | lbs_deb_scan("Scan: Scanning current channel only"); |
876c9d3a MT |
520 | } |
521 | ||
522 | } else { | |
9012b28a | 523 | lbs_deb_scan("Scan: Creating full region channel list\n"); |
876c9d3a MT |
524 | wlan_scan_create_channel_list(priv, pscanchanlist, |
525 | *pfilteredscan); | |
526 | } | |
527 | ||
528 | out: | |
529 | return pscancfgout; | |
530 | } | |
531 | ||
532 | /** | |
533 | * @brief Construct and send multiple scan config commands to the firmware | |
534 | * | |
535 | * Previous routines have created a wlan_scan_cmd_config with any requested | |
536 | * TLVs. This function splits the channel TLV into maxchanperscan lists | |
537 | * and sends the portion of the channel TLV along with the other TLVs | |
538 | * to the wlan_cmd routines for execution in the firmware. | |
539 | * | |
540 | * @param priv A pointer to wlan_private structure | |
541 | * @param maxchanperscan Maximum number channels to be included in each | |
542 | * scan command sent to firmware | |
543 | * @param filteredscan Flag indicating whether or not a BSSID or SSID | |
544 | * filter is being used for the firmware command | |
545 | * scan command sent to firmware | |
546 | * @param pscancfgout Scan configuration used for this scan. | |
547 | * @param pchantlvout Pointer in the pscancfgout where the channel TLV | |
548 | * should start. This is past any other TLVs that | |
549 | * must be sent down in each firmware command. | |
550 | * @param pscanchanlist List of channels to scan in maxchanperscan segments | |
551 | * | |
552 | * @return 0 or error return otherwise | |
553 | */ | |
554 | static int wlan_scan_channel_list(wlan_private * priv, | |
555 | int maxchanperscan, | |
556 | u8 filteredscan, | |
557 | struct wlan_scan_cmd_config * pscancfgout, | |
558 | struct mrvlietypes_chanlistparamset * pchantlvout, | |
064827ed | 559 | struct chanscanparamset * pscanchanlist, |
2be92196 MT |
560 | const struct wlan_ioctl_user_scan_cfg * puserscanin, |
561 | int full_scan) | |
876c9d3a MT |
562 | { |
563 | struct chanscanparamset *ptmpchan; | |
564 | struct chanscanparamset *pstartchan; | |
565 | u8 scanband; | |
566 | int doneearly; | |
567 | int tlvidx; | |
568 | int ret = 0; | |
064827ed MT |
569 | int scanned = 0; |
570 | union iwreq_data wrqu; | |
876c9d3a | 571 | |
9012b28a | 572 | lbs_deb_enter(LBS_DEB_ASSOC); |
876c9d3a MT |
573 | |
574 | if (pscancfgout == 0 || pchantlvout == 0 || pscanchanlist == 0) { | |
9012b28a | 575 | lbs_deb_scan("Scan: Null detect: %p, %p, %p\n", |
876c9d3a MT |
576 | pscancfgout, pchantlvout, pscanchanlist); |
577 | return -1; | |
578 | } | |
579 | ||
580 | pchantlvout->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); | |
581 | ||
582 | /* Set the temp channel struct pointer to the start of the desired list */ | |
583 | ptmpchan = pscanchanlist; | |
584 | ||
064827ed MT |
585 | if (priv->adapter->last_scanned_channel && !puserscanin) |
586 | ptmpchan += priv->adapter->last_scanned_channel; | |
587 | ||
876c9d3a MT |
588 | /* Loop through the desired channel list, sending a new firmware scan |
589 | * commands for each maxchanperscan channels (or for 1,6,11 individually | |
590 | * if configured accordingly) | |
591 | */ | |
592 | while (ptmpchan->channumber) { | |
593 | ||
594 | tlvidx = 0; | |
595 | pchantlvout->header.len = 0; | |
596 | scanband = ptmpchan->radiotype; | |
597 | pstartchan = ptmpchan; | |
598 | doneearly = 0; | |
599 | ||
600 | /* Construct the channel TLV for the scan command. Continue to | |
601 | * insert channel TLVs until: | |
602 | * - the tlvidx hits the maximum configured per scan command | |
603 | * - the next channel to insert is 0 (end of desired channel list) | |
604 | * - doneearly is set (controlling individual scanning of 1,6,11) | |
605 | */ | |
606 | while (tlvidx < maxchanperscan && ptmpchan->channumber | |
064827ed | 607 | && !doneearly && scanned < 2) { |
876c9d3a | 608 | |
9012b28a | 609 | lbs_deb_scan( |
876c9d3a MT |
610 | "Scan: Chan(%3d), Radio(%d), mode(%d,%d), Dur(%d)\n", |
611 | ptmpchan->channumber, ptmpchan->radiotype, | |
612 | ptmpchan->chanscanmode.passivescan, | |
613 | ptmpchan->chanscanmode.disablechanfilt, | |
614 | ptmpchan->maxscantime); | |
615 | ||
616 | /* Copy the current channel TLV to the command being prepared */ | |
617 | memcpy(pchantlvout->chanscanparam + tlvidx, | |
618 | ptmpchan, sizeof(pchantlvout->chanscanparam)); | |
619 | ||
620 | /* Increment the TLV header length by the size appended */ | |
981f187b DW |
621 | /* Ew, it would be _so_ nice if we could just declare the |
622 | variable little-endian and let GCC handle it for us */ | |
623 | pchantlvout->header.len = | |
624 | cpu_to_le16(le16_to_cpu(pchantlvout->header.len) + | |
625 | sizeof(pchantlvout->chanscanparam)); | |
876c9d3a MT |
626 | |
627 | /* | |
628 | * The tlv buffer length is set to the number of bytes of the | |
629 | * between the channel tlv pointer and the start of the | |
630 | * tlv buffer. This compensates for any TLVs that were appended | |
631 | * before the channel list. | |
632 | */ | |
633 | pscancfgout->tlvbufferlen = ((u8 *) pchantlvout | |
634 | - pscancfgout->tlvbuffer); | |
635 | ||
636 | /* Add the size of the channel tlv header and the data length */ | |
637 | pscancfgout->tlvbufferlen += | |
638 | (sizeof(pchantlvout->header) | |
981f187b | 639 | + le16_to_cpu(pchantlvout->header.len)); |
876c9d3a MT |
640 | |
641 | /* Increment the index to the channel tlv we are constructing */ | |
642 | tlvidx++; | |
643 | ||
644 | doneearly = 0; | |
645 | ||
646 | /* Stop the loop if the *current* channel is in the 1,6,11 set | |
647 | * and we are not filtering on a BSSID or SSID. | |
648 | */ | |
649 | if (!filteredscan && (ptmpchan->channumber == 1 | |
650 | || ptmpchan->channumber == 6 | |
651 | || ptmpchan->channumber == 11)) { | |
652 | doneearly = 1; | |
653 | } | |
654 | ||
655 | /* Increment the tmp pointer to the next channel to be scanned */ | |
656 | ptmpchan++; | |
064827ed | 657 | scanned++; |
876c9d3a MT |
658 | |
659 | /* Stop the loop if the *next* channel is in the 1,6,11 set. | |
660 | * This will cause it to be the only channel scanned on the next | |
661 | * interation | |
662 | */ | |
663 | if (!filteredscan && (ptmpchan->channumber == 1 | |
664 | || ptmpchan->channumber == 6 | |
665 | || ptmpchan->channumber == 11)) { | |
666 | doneearly = 1; | |
667 | } | |
668 | } | |
669 | ||
670 | /* Send the scan command to the firmware with the specified cfg */ | |
671 | ret = libertas_prepare_and_send_command(priv, cmd_802_11_scan, 0, | |
672 | 0, 0, pscancfgout); | |
2be92196 | 673 | if (scanned >= 2 && !full_scan) { |
9012b28a HS |
674 | ret = 0; |
675 | goto done; | |
064827ed | 676 | } |
2be92196 | 677 | scanned = 0; |
876c9d3a MT |
678 | } |
679 | ||
d9ad2f5d | 680 | done: |
064827ed MT |
681 | priv->adapter->last_scanned_channel = ptmpchan->channumber; |
682 | ||
d9ad2f5d | 683 | /* Tell userspace the scan table has been updated */ |
064827ed | 684 | memset(&wrqu, 0, sizeof(union iwreq_data)); |
634b8f49 | 685 | wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL); |
064827ed | 686 | |
9012b28a | 687 | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); |
876c9d3a MT |
688 | return ret; |
689 | } | |
690 | ||
eb8f7330 DW |
691 | static void |
692 | clear_selected_scan_list_entries(wlan_adapter * adapter, | |
693 | const struct wlan_ioctl_user_scan_cfg * scan_cfg) | |
694 | { | |
695 | struct bss_descriptor * bss; | |
696 | struct bss_descriptor * safe; | |
697 | u32 clear_ssid_flag = 0, clear_bssid_flag = 0; | |
698 | ||
699 | if (!scan_cfg) | |
700 | return; | |
701 | ||
702 | if (scan_cfg->clear_ssid && scan_cfg->ssid_len) | |
703 | clear_ssid_flag = 1; | |
704 | ||
705 | if (scan_cfg->clear_bssid | |
706 | && (compare_ether_addr(scan_cfg->bssid, &zeromac[0]) != 0) | |
707 | && (compare_ether_addr(scan_cfg->bssid, &bcastmac[0]) != 0)) { | |
708 | clear_bssid_flag = 1; | |
709 | } | |
710 | ||
711 | if (!clear_ssid_flag && !clear_bssid_flag) | |
712 | return; | |
713 | ||
714 | mutex_lock(&adapter->lock); | |
715 | list_for_each_entry_safe (bss, safe, &adapter->network_list, list) { | |
716 | u32 clear = 0; | |
717 | ||
718 | /* Check for an SSID match */ | |
719 | if ( clear_ssid_flag | |
d8efea25 DW |
720 | && (bss->ssid_len == scan_cfg->ssid_len) |
721 | && !memcmp(bss->ssid, scan_cfg->ssid, bss->ssid_len)) | |
eb8f7330 DW |
722 | clear = 1; |
723 | ||
724 | /* Check for a BSSID match */ | |
725 | if ( clear_bssid_flag | |
726 | && !compare_ether_addr(bss->bssid, scan_cfg->bssid)) | |
727 | clear = 1; | |
728 | ||
729 | if (clear) { | |
730 | list_move_tail (&bss->list, &adapter->network_free_list); | |
731 | clear_bss_descriptor(bss); | |
732 | } | |
733 | } | |
734 | mutex_unlock(&adapter->lock); | |
735 | } | |
736 | ||
737 | ||
876c9d3a MT |
738 | /** |
739 | * @brief Internal function used to start a scan based on an input config | |
740 | * | |
741 | * Use the input user scan configuration information when provided in | |
742 | * order to send the appropriate scan commands to firmware to populate or | |
743 | * update the internal driver scan table | |
744 | * | |
745 | * @param priv A pointer to wlan_private structure | |
746 | * @param puserscanin Pointer to the input configuration for the requested | |
747 | * scan. | |
748 | * | |
749 | * @return 0 or < 0 if error | |
750 | */ | |
751 | int wlan_scan_networks(wlan_private * priv, | |
2be92196 MT |
752 | const struct wlan_ioctl_user_scan_cfg * puserscanin, |
753 | int full_scan) | |
876c9d3a | 754 | { |
eb8f7330 | 755 | wlan_adapter * adapter = priv->adapter; |
876c9d3a MT |
756 | struct mrvlietypes_chanlistparamset *pchantlvout; |
757 | struct chanscanparamset * scan_chan_list = NULL; | |
758 | struct wlan_scan_cmd_config * scan_cfg = NULL; | |
876c9d3a MT |
759 | u8 filteredscan; |
760 | u8 scancurrentchanonly; | |
761 | int maxchanperscan; | |
762 | int ret; | |
f8f55108 DW |
763 | #ifdef CONFIG_LIBERTAS_DEBUG |
764 | struct bss_descriptor * iter_bss; | |
765 | int i = 0; | |
766 | #endif | |
876c9d3a | 767 | |
9012b28a | 768 | lbs_deb_enter(LBS_DEB_ASSOC); |
876c9d3a MT |
769 | |
770 | scan_chan_list = kzalloc(sizeof(struct chanscanparamset) * | |
771 | WLAN_IOCTL_USER_SCAN_CHAN_MAX, GFP_KERNEL); | |
772 | if (scan_chan_list == NULL) { | |
773 | ret = -ENOMEM; | |
774 | goto out; | |
775 | } | |
776 | ||
777 | scan_cfg = wlan_scan_setup_scan_config(priv, | |
778 | puserscanin, | |
779 | &pchantlvout, | |
780 | scan_chan_list, | |
781 | &maxchanperscan, | |
782 | &filteredscan, | |
783 | &scancurrentchanonly); | |
784 | if (scan_cfg == NULL) { | |
785 | ret = -ENOMEM; | |
786 | goto out; | |
787 | } | |
788 | ||
eb8f7330 | 789 | clear_selected_scan_list_entries(adapter, puserscanin); |
876c9d3a MT |
790 | |
791 | /* Keep the data path active if we are only scanning our current channel */ | |
792 | if (!scancurrentchanonly) { | |
634b8f49 HS |
793 | netif_stop_queue(priv->dev); |
794 | netif_carrier_off(priv->dev); | |
51d84f50 JC |
795 | netif_stop_queue(priv->mesh_dev); |
796 | netif_carrier_off(priv->mesh_dev); | |
876c9d3a MT |
797 | } |
798 | ||
799 | ret = wlan_scan_channel_list(priv, | |
800 | maxchanperscan, | |
801 | filteredscan, | |
802 | scan_cfg, | |
803 | pchantlvout, | |
064827ed | 804 | scan_chan_list, |
2be92196 MT |
805 | puserscanin, |
806 | full_scan); | |
876c9d3a | 807 | |
f8f55108 DW |
808 | #ifdef CONFIG_LIBERTAS_DEBUG |
809 | /* Dump the scan table */ | |
810 | mutex_lock(&adapter->lock); | |
811 | list_for_each_entry (iter_bss, &adapter->network_list, list) { | |
812 | lbs_deb_scan("Scan:(%02d) " MAC_FMT ", RSSI[%03d], SSID[%s]\n", | |
813 | i++, MAC_ARG(iter_bss->bssid), (s32) iter_bss->rssi, | |
814 | escape_essid(iter_bss->ssid, iter_bss->ssid_len)); | |
815 | } | |
816 | mutex_unlock(&adapter->lock); | |
817 | #endif | |
876c9d3a MT |
818 | |
819 | if (priv->adapter->connect_status == libertas_connected) { | |
634b8f49 HS |
820 | netif_carrier_on(priv->dev); |
821 | netif_wake_queue(priv->dev); | |
51d84f50 JC |
822 | netif_carrier_on(priv->mesh_dev); |
823 | netif_wake_queue(priv->mesh_dev); | |
876c9d3a MT |
824 | } |
825 | ||
826 | out: | |
827 | if (scan_cfg) | |
828 | kfree(scan_cfg); | |
829 | ||
830 | if (scan_chan_list) | |
831 | kfree(scan_chan_list); | |
832 | ||
9012b28a | 833 | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); |
876c9d3a MT |
834 | return ret; |
835 | } | |
836 | ||
837 | /** | |
838 | * @brief Inspect the scan response buffer for pointers to expected TLVs | |
839 | * | |
840 | * TLVs can be included at the end of the scan response BSS information. | |
841 | * Parse the data in the buffer for pointers to TLVs that can potentially | |
842 | * be passed back in the response | |
843 | * | |
844 | * @param ptlv Pointer to the start of the TLV buffer to parse | |
845 | * @param tlvbufsize size of the TLV buffer | |
846 | * @param ptsftlv Output parameter: Pointer to the TSF TLV if found | |
847 | * | |
848 | * @return void | |
849 | */ | |
850 | static | |
851 | void wlan_ret_802_11_scan_get_tlv_ptrs(struct mrvlietypes_data * ptlv, | |
852 | int tlvbufsize, | |
853 | struct mrvlietypes_tsftimestamp ** ptsftlv) | |
854 | { | |
855 | struct mrvlietypes_data *pcurrenttlv; | |
856 | int tlvbufleft; | |
857 | u16 tlvtype; | |
858 | u16 tlvlen; | |
859 | ||
860 | pcurrenttlv = ptlv; | |
861 | tlvbufleft = tlvbufsize; | |
862 | *ptsftlv = NULL; | |
863 | ||
9012b28a | 864 | lbs_deb_scan("SCAN_RESP: tlvbufsize = %d\n", tlvbufsize); |
876c9d3a MT |
865 | lbs_dbg_hex("SCAN_RESP: TLV Buf", (u8 *) ptlv, tlvbufsize); |
866 | ||
867 | while (tlvbufleft >= sizeof(struct mrvlietypesheader)) { | |
868 | tlvtype = le16_to_cpu(pcurrenttlv->header.type); | |
869 | tlvlen = le16_to_cpu(pcurrenttlv->header.len); | |
870 | ||
871 | switch (tlvtype) { | |
872 | case TLV_TYPE_TSFTIMESTAMP: | |
873 | *ptsftlv = (struct mrvlietypes_tsftimestamp *) pcurrenttlv; | |
874 | break; | |
875 | ||
876 | default: | |
9012b28a | 877 | lbs_deb_scan("SCAN_RESP: Unhandled TLV = %d\n", |
876c9d3a MT |
878 | tlvtype); |
879 | /* Give up, this seems corrupted */ | |
880 | return; | |
881 | } /* switch */ | |
882 | ||
883 | tlvbufleft -= (sizeof(ptlv->header) + tlvlen); | |
884 | pcurrenttlv = | |
885 | (struct mrvlietypes_data *) (pcurrenttlv->Data + tlvlen); | |
886 | } /* while */ | |
887 | } | |
888 | ||
889 | /** | |
890 | * @brief Interpret a BSS scan response returned from the firmware | |
891 | * | |
892 | * Parse the various fixed fields and IEs passed back for a a BSS probe | |
893 | * response or beacon from the scan command. Record information as needed | |
894 | * in the scan table struct bss_descriptor for that entry. | |
895 | * | |
fcdb53db | 896 | * @param bss Output parameter: Pointer to the BSS Entry |
876c9d3a MT |
897 | * |
898 | * @return 0 or -1 | |
899 | */ | |
fcdb53db DW |
900 | static int libertas_process_bss(struct bss_descriptor * bss, |
901 | u8 ** pbeaconinfo, int *bytesleft) | |
876c9d3a MT |
902 | { |
903 | enum ieeetypes_elementid elemID; | |
904 | struct ieeetypes_fhparamset *pFH; | |
905 | struct ieeetypes_dsparamset *pDS; | |
906 | struct ieeetypes_cfparamset *pCF; | |
907 | struct ieeetypes_ibssparamset *pibss; | |
876c9d3a MT |
908 | u8 *pcurrentptr; |
909 | u8 *pRate; | |
910 | u8 elemlen; | |
911 | u8 bytestocopy; | |
912 | u8 ratesize; | |
913 | u16 beaconsize; | |
914 | u8 founddatarateie; | |
915 | int bytesleftforcurrentbeacon; | |
9012b28a | 916 | int ret; |
876c9d3a | 917 | |
876c9d3a MT |
918 | struct IE_WPA *pIe; |
919 | const u8 oui01[4] = { 0x00, 0x50, 0xf2, 0x01 }; | |
920 | ||
921 | struct ieeetypes_countryinfoset *pcountryinfo; | |
922 | ||
9012b28a | 923 | lbs_deb_enter(LBS_DEB_ASSOC); |
876c9d3a MT |
924 | |
925 | founddatarateie = 0; | |
926 | ratesize = 0; | |
927 | beaconsize = 0; | |
928 | ||
929 | if (*bytesleft >= sizeof(beaconsize)) { | |
930 | /* Extract & convert beacon size from the command buffer */ | |
981f187b | 931 | beaconsize = le16_to_cpup((void *)*pbeaconinfo); |
876c9d3a MT |
932 | *bytesleft -= sizeof(beaconsize); |
933 | *pbeaconinfo += sizeof(beaconsize); | |
934 | } | |
935 | ||
936 | if (beaconsize == 0 || beaconsize > *bytesleft) { | |
937 | ||
938 | *pbeaconinfo += *bytesleft; | |
939 | *bytesleft = 0; | |
940 | ||
941 | return -1; | |
942 | } | |
943 | ||
944 | /* Initialize the current working beacon pointer for this BSS iteration */ | |
945 | pcurrentptr = *pbeaconinfo; | |
946 | ||
947 | /* Advance the return beacon pointer past the current beacon */ | |
948 | *pbeaconinfo += beaconsize; | |
949 | *bytesleft -= beaconsize; | |
950 | ||
951 | bytesleftforcurrentbeacon = beaconsize; | |
952 | ||
fcdb53db | 953 | memcpy(bss->bssid, pcurrentptr, ETH_ALEN); |
02eb229b | 954 | lbs_deb_scan("process_bss: AP BSSID " MAC_FMT "\n", MAC_ARG(bss->bssid)); |
876c9d3a MT |
955 | |
956 | pcurrentptr += ETH_ALEN; | |
957 | bytesleftforcurrentbeacon -= ETH_ALEN; | |
958 | ||
959 | if (bytesleftforcurrentbeacon < 12) { | |
fcdb53db | 960 | lbs_deb_scan("process_bss: Not enough bytes left\n"); |
876c9d3a MT |
961 | return -1; |
962 | } | |
963 | ||
964 | /* | |
965 | * next 4 fields are RSSI, time stamp, beacon interval, | |
966 | * and capability information | |
967 | */ | |
968 | ||
969 | /* RSSI is 1 byte long */ | |
981f187b | 970 | bss->rssi = *pcurrentptr; |
fcdb53db | 971 | lbs_deb_scan("process_bss: RSSI=%02X\n", *pcurrentptr); |
876c9d3a MT |
972 | pcurrentptr += 1; |
973 | bytesleftforcurrentbeacon -= 1; | |
974 | ||
975 | /* time stamp is 8 bytes long */ | |
0c9ca690 | 976 | bss->timestamp = le64_to_cpup((void *)pcurrentptr); |
876c9d3a MT |
977 | pcurrentptr += 8; |
978 | bytesleftforcurrentbeacon -= 8; | |
979 | ||
980 | /* beacon interval is 2 bytes long */ | |
0c9ca690 | 981 | bss->beaconperiod = le16_to_cpup((void *)pcurrentptr); |
876c9d3a MT |
982 | pcurrentptr += 2; |
983 | bytesleftforcurrentbeacon -= 2; | |
984 | ||
985 | /* capability information is 2 bytes long */ | |
0c9ca690 DW |
986 | bss->capability = le16_to_cpup((void *)pcurrentptr); |
987 | lbs_deb_scan("process_bss: capabilities = 0x%4X\n", bss->capability); | |
876c9d3a MT |
988 | pcurrentptr += 2; |
989 | bytesleftforcurrentbeacon -= 2; | |
990 | ||
0c9ca690 DW |
991 | if (bss->capability & WLAN_CAPABILITY_PRIVACY) |
992 | lbs_deb_scan("process_bss: AP WEP enabled\n"); | |
993 | if (bss->capability & WLAN_CAPABILITY_IBSS) | |
994 | bss->mode = IW_MODE_ADHOC; | |
995 | else | |
996 | bss->mode = IW_MODE_INFRA; | |
997 | ||
876c9d3a | 998 | /* rest of the current buffer are IE's */ |
fcdb53db | 999 | lbs_deb_scan("process_bss: IE length for this AP = %d\n", |
876c9d3a MT |
1000 | bytesleftforcurrentbeacon); |
1001 | ||
fcdb53db | 1002 | lbs_dbg_hex("process_bss: IE info", (u8 *) pcurrentptr, |
876c9d3a MT |
1003 | bytesleftforcurrentbeacon); |
1004 | ||
876c9d3a MT |
1005 | /* process variable IE */ |
1006 | while (bytesleftforcurrentbeacon >= 2) { | |
1007 | elemID = (enum ieeetypes_elementid) (*((u8 *) pcurrentptr)); | |
1008 | elemlen = *((u8 *) pcurrentptr + 1); | |
1009 | ||
1010 | if (bytesleftforcurrentbeacon < elemlen) { | |
fcdb53db | 1011 | lbs_deb_scan("process_bss: error in processing IE, " |
876c9d3a MT |
1012 | "bytes left < IE length\n"); |
1013 | bytesleftforcurrentbeacon = 0; | |
1014 | continue; | |
1015 | } | |
1016 | ||
1017 | switch (elemID) { | |
876c9d3a | 1018 | case SSID: |
d8efea25 DW |
1019 | bss->ssid_len = elemlen; |
1020 | memcpy(bss->ssid, (pcurrentptr + 2), elemlen); | |
1021 | lbs_deb_scan("ssid '%s', ssid length %u\n", | |
1022 | escape_essid(bss->ssid, bss->ssid_len), | |
1023 | bss->ssid_len); | |
876c9d3a MT |
1024 | break; |
1025 | ||
1026 | case SUPPORTED_RATES: | |
fcdb53db DW |
1027 | memcpy(bss->datarates, (pcurrentptr + 2), elemlen); |
1028 | memmove(bss->libertas_supported_rates, (pcurrentptr + 2), | |
876c9d3a MT |
1029 | elemlen); |
1030 | ratesize = elemlen; | |
1031 | founddatarateie = 1; | |
1032 | break; | |
1033 | ||
1034 | case EXTRA_IE: | |
fcdb53db | 1035 | lbs_deb_scan("process_bss: EXTRA_IE Found!\n"); |
876c9d3a MT |
1036 | break; |
1037 | ||
1038 | case FH_PARAM_SET: | |
1039 | pFH = (struct ieeetypes_fhparamset *) pcurrentptr; | |
fcdb53db | 1040 | memmove(&bss->phyparamset.fhparamset, pFH, |
876c9d3a | 1041 | sizeof(struct ieeetypes_fhparamset)); |
981f187b | 1042 | #if 0 /* I think we can store these LE */ |
fcdb53db DW |
1043 | bss->phyparamset.fhparamset.dwelltime |
1044 | = le16_to_cpu(bss->phyparamset.fhparamset.dwelltime); | |
981f187b | 1045 | #endif |
876c9d3a MT |
1046 | break; |
1047 | ||
1048 | case DS_PARAM_SET: | |
1049 | pDS = (struct ieeetypes_dsparamset *) pcurrentptr; | |
fcdb53db DW |
1050 | bss->channel = pDS->currentchan; |
1051 | memcpy(&bss->phyparamset.dsparamset, pDS, | |
876c9d3a MT |
1052 | sizeof(struct ieeetypes_dsparamset)); |
1053 | break; | |
1054 | ||
1055 | case CF_PARAM_SET: | |
1056 | pCF = (struct ieeetypes_cfparamset *) pcurrentptr; | |
fcdb53db | 1057 | memcpy(&bss->ssparamset.cfparamset, pCF, |
876c9d3a MT |
1058 | sizeof(struct ieeetypes_cfparamset)); |
1059 | break; | |
1060 | ||
1061 | case IBSS_PARAM_SET: | |
1062 | pibss = (struct ieeetypes_ibssparamset *) pcurrentptr; | |
fcdb53db DW |
1063 | bss->atimwindow = le32_to_cpu(pibss->atimwindow); |
1064 | memmove(&bss->ssparamset.ibssparamset, pibss, | |
876c9d3a | 1065 | sizeof(struct ieeetypes_ibssparamset)); |
981f187b | 1066 | #if 0 |
fcdb53db DW |
1067 | bss->ssparamset.ibssparamset.atimwindow |
1068 | = le16_to_cpu(bss->ssparamset.ibssparamset.atimwindow); | |
981f187b | 1069 | #endif |
876c9d3a MT |
1070 | break; |
1071 | ||
1072 | /* Handle Country Info IE */ | |
1073 | case COUNTRY_INFO: | |
fcdb53db DW |
1074 | pcountryinfo = (struct ieeetypes_countryinfoset *) pcurrentptr; |
1075 | if (pcountryinfo->len < sizeof(pcountryinfo->countrycode) | |
876c9d3a | 1076 | || pcountryinfo->len > 254) { |
fcdb53db | 1077 | lbs_deb_scan("process_bss: 11D- Err " |
4269e2ad | 1078 | "CountryInfo len =%d min=%zd max=254\n", |
876c9d3a MT |
1079 | pcountryinfo->len, |
1080 | sizeof(pcountryinfo->countrycode)); | |
9012b28a HS |
1081 | ret = -1; |
1082 | goto done; | |
876c9d3a MT |
1083 | } |
1084 | ||
fcdb53db | 1085 | memcpy(&bss->countryinfo, |
876c9d3a | 1086 | pcountryinfo, pcountryinfo->len + 2); |
fcdb53db | 1087 | lbs_dbg_hex("process_bss: 11D- CountryInfo:", |
876c9d3a MT |
1088 | (u8 *) pcountryinfo, |
1089 | (u32) (pcountryinfo->len + 2)); | |
1090 | break; | |
1091 | ||
1092 | case EXTENDED_SUPPORTED_RATES: | |
1093 | /* | |
1094 | * only process extended supported rate | |
1095 | * if data rate is already found. | |
1096 | * data rate IE should come before | |
1097 | * extended supported rate IE | |
1098 | */ | |
1099 | if (founddatarateie) { | |
1100 | if ((elemlen + ratesize) > WLAN_SUPPORTED_RATES) { | |
1101 | bytestocopy = | |
1102 | (WLAN_SUPPORTED_RATES - ratesize); | |
1103 | } else { | |
1104 | bytestocopy = elemlen; | |
1105 | } | |
1106 | ||
fcdb53db | 1107 | pRate = (u8 *) bss->datarates; |
876c9d3a MT |
1108 | pRate += ratesize; |
1109 | memmove(pRate, (pcurrentptr + 2), bytestocopy); | |
fcdb53db | 1110 | pRate = (u8 *) bss->libertas_supported_rates; |
876c9d3a MT |
1111 | pRate += ratesize; |
1112 | memmove(pRate, (pcurrentptr + 2), bytestocopy); | |
1113 | } | |
1114 | break; | |
1115 | ||
1116 | case VENDOR_SPECIFIC_221: | |
1117 | #define IE_ID_LEN_FIELDS_BYTES 2 | |
1118 | pIe = (struct IE_WPA *)pcurrentptr; | |
1119 | ||
51b0c9d0 DW |
1120 | if (memcmp(pIe->oui, oui01, sizeof(oui01))) |
1121 | break; | |
1122 | ||
fcdb53db DW |
1123 | bss->wpa_ie_len = min(elemlen + IE_ID_LEN_FIELDS_BYTES, |
1124 | MAX_WPA_IE_LEN); | |
1125 | memcpy(bss->wpa_ie, pcurrentptr, bss->wpa_ie_len); | |
1126 | lbs_dbg_hex("process_bss: WPA IE", bss->wpa_ie, elemlen); | |
876c9d3a MT |
1127 | break; |
1128 | case WPA2_IE: | |
1129 | pIe = (struct IE_WPA *)pcurrentptr; | |
fcdb53db DW |
1130 | bss->rsn_ie_len = min(elemlen + IE_ID_LEN_FIELDS_BYTES, |
1131 | MAX_WPA_IE_LEN); | |
1132 | memcpy(bss->rsn_ie, pcurrentptr, bss->rsn_ie_len); | |
1133 | lbs_dbg_hex("process_bss: RSN_IE", bss->rsn_ie, elemlen); | |
876c9d3a MT |
1134 | break; |
1135 | case TIM: | |
1136 | break; | |
1137 | ||
1138 | case CHALLENGE_TEXT: | |
1139 | break; | |
1140 | } | |
1141 | ||
1142 | pcurrentptr += elemlen + 2; | |
1143 | ||
1144 | /* need to account for IE ID and IE len */ | |
1145 | bytesleftforcurrentbeacon -= (elemlen + 2); | |
1146 | ||
1147 | } /* while (bytesleftforcurrentbeacon > 2) */ | |
fcdb53db DW |
1148 | |
1149 | /* Timestamp */ | |
1150 | bss->last_scanned = jiffies; | |
1151 | ||
9012b28a | 1152 | ret = 0; |
876c9d3a | 1153 | |
9012b28a HS |
1154 | done: |
1155 | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); | |
1156 | return ret; | |
876c9d3a MT |
1157 | } |
1158 | ||
1159 | /** | |
1160 | * @brief Compare two SSIDs | |
1161 | * | |
1162 | * @param ssid1 A pointer to ssid to compare | |
1163 | * @param ssid2 A pointer to ssid to compare | |
1164 | * | |
1165 | * @return 0--ssid is same, otherwise is different | |
1166 | */ | |
717c9339 | 1167 | int libertas_ssid_cmp(u8 *ssid1, u8 ssid1_len, u8 *ssid2, u8 ssid2_len) |
876c9d3a | 1168 | { |
d8efea25 | 1169 | if (ssid1_len != ssid2_len) |
876c9d3a MT |
1170 | return -1; |
1171 | ||
d8efea25 | 1172 | return memcmp(ssid1, ssid2, ssid1_len); |
876c9d3a MT |
1173 | } |
1174 | ||
1175 | /** | |
1176 | * @brief This function finds a specific compatible BSSID in the scan list | |
1177 | * | |
1178 | * @param adapter A pointer to wlan_adapter | |
1179 | * @param bssid BSSID to find in the scan list | |
1180 | * @param mode Network mode: Infrastructure or IBSS | |
1181 | * | |
1182 | * @return index in BSSID list, or error return code (< 0) | |
1183 | */ | |
717c9339 | 1184 | struct bss_descriptor * libertas_find_bssid_in_list(wlan_adapter * adapter, |
fcdb53db | 1185 | u8 * bssid, u8 mode) |
876c9d3a | 1186 | { |
fcdb53db DW |
1187 | struct bss_descriptor * iter_bss; |
1188 | struct bss_descriptor * found_bss = NULL; | |
876c9d3a MT |
1189 | |
1190 | if (!bssid) | |
fcdb53db | 1191 | return NULL; |
876c9d3a | 1192 | |
fcdb53db DW |
1193 | lbs_dbg_hex("libertas_find_BSSID_in_list: looking for ", |
1194 | bssid, ETH_ALEN); | |
876c9d3a | 1195 | |
fcdb53db DW |
1196 | /* Look through the scan table for a compatible match. The loop will |
1197 | * continue past a matched bssid that is not compatible in case there | |
1198 | * is an AP with multiple SSIDs assigned to the same BSSID | |
876c9d3a | 1199 | */ |
fcdb53db DW |
1200 | mutex_lock(&adapter->lock); |
1201 | list_for_each_entry (iter_bss, &adapter->network_list, list) { | |
3cf20931 | 1202 | if (compare_ether_addr(iter_bss->bssid, bssid)) |
fcdb53db DW |
1203 | continue; /* bssid doesn't match */ |
1204 | switch (mode) { | |
1205 | case IW_MODE_INFRA: | |
1206 | case IW_MODE_ADHOC: | |
1207 | if (!is_network_compatible(adapter, iter_bss, mode)) | |
876c9d3a | 1208 | break; |
fcdb53db DW |
1209 | found_bss = iter_bss; |
1210 | break; | |
1211 | default: | |
1212 | found_bss = iter_bss; | |
1213 | break; | |
876c9d3a MT |
1214 | } |
1215 | } | |
fcdb53db | 1216 | mutex_unlock(&adapter->lock); |
876c9d3a | 1217 | |
fcdb53db | 1218 | return found_bss; |
876c9d3a MT |
1219 | } |
1220 | ||
1221 | /** | |
1222 | * @brief This function finds ssid in ssid list. | |
1223 | * | |
1224 | * @param adapter A pointer to wlan_adapter | |
1225 | * @param ssid SSID to find in the list | |
1226 | * @param bssid BSSID to qualify the SSID selection (if provided) | |
1227 | * @param mode Network mode: Infrastructure or IBSS | |
1228 | * | |
1229 | * @return index in BSSID list | |
1230 | */ | |
717c9339 | 1231 | struct bss_descriptor * libertas_find_ssid_in_list(wlan_adapter * adapter, |
d8efea25 | 1232 | u8 *ssid, u8 ssid_len, u8 * bssid, u8 mode, |
aeea0ab4 | 1233 | int channel) |
876c9d3a | 1234 | { |
876c9d3a | 1235 | u8 bestrssi = 0; |
fcdb53db DW |
1236 | struct bss_descriptor * iter_bss = NULL; |
1237 | struct bss_descriptor * found_bss = NULL; | |
1238 | struct bss_descriptor * tmp_oldest = NULL; | |
876c9d3a | 1239 | |
fcdb53db DW |
1240 | mutex_lock(&adapter->lock); |
1241 | ||
1242 | list_for_each_entry (iter_bss, &adapter->network_list, list) { | |
1243 | if ( !tmp_oldest | |
1244 | || (iter_bss->last_scanned < tmp_oldest->last_scanned)) | |
1245 | tmp_oldest = iter_bss; | |
1246 | ||
717c9339 | 1247 | if (libertas_ssid_cmp(iter_bss->ssid, iter_bss->ssid_len, |
d8efea25 | 1248 | ssid, ssid_len) != 0) |
fcdb53db | 1249 | continue; /* ssid doesn't match */ |
3cf20931 | 1250 | if (bssid && compare_ether_addr(iter_bss->bssid, bssid) != 0) |
fcdb53db | 1251 | continue; /* bssid doesn't match */ |
aeea0ab4 DW |
1252 | if ((channel > 0) && (iter_bss->channel != channel)) |
1253 | continue; /* channel doesn't match */ | |
fcdb53db DW |
1254 | |
1255 | switch (mode) { | |
1256 | case IW_MODE_INFRA: | |
1257 | case IW_MODE_ADHOC: | |
1258 | if (!is_network_compatible(adapter, iter_bss, mode)) | |
876c9d3a | 1259 | break; |
fcdb53db DW |
1260 | |
1261 | if (bssid) { | |
1262 | /* Found requested BSSID */ | |
1263 | found_bss = iter_bss; | |
1264 | goto out; | |
1265 | } | |
1266 | ||
1267 | if (SCAN_RSSI(iter_bss->rssi) > bestrssi) { | |
1268 | bestrssi = SCAN_RSSI(iter_bss->rssi); | |
1269 | found_bss = iter_bss; | |
1270 | } | |
1271 | break; | |
1272 | case IW_MODE_AUTO: | |
1273 | default: | |
1274 | if (SCAN_RSSI(iter_bss->rssi) > bestrssi) { | |
1275 | bestrssi = SCAN_RSSI(iter_bss->rssi); | |
1276 | found_bss = iter_bss; | |
876c9d3a | 1277 | } |
fcdb53db | 1278 | break; |
876c9d3a MT |
1279 | } |
1280 | } | |
1281 | ||
fcdb53db DW |
1282 | out: |
1283 | mutex_unlock(&adapter->lock); | |
1284 | return found_bss; | |
876c9d3a MT |
1285 | } |
1286 | ||
1287 | /** | |
1288 | * @brief This function finds the best SSID in the Scan List | |
1289 | * | |
1290 | * Search the scan table for the best SSID that also matches the current | |
1291 | * adapter network preference (infrastructure or adhoc) | |
1292 | * | |
1293 | * @param adapter A pointer to wlan_adapter | |
1294 | * | |
1295 | * @return index in BSSID list | |
1296 | */ | |
717c9339 | 1297 | struct bss_descriptor * libertas_find_best_ssid_in_list(wlan_adapter * adapter, |
fcdb53db | 1298 | u8 mode) |
876c9d3a | 1299 | { |
876c9d3a | 1300 | u8 bestrssi = 0; |
fcdb53db DW |
1301 | struct bss_descriptor * iter_bss; |
1302 | struct bss_descriptor * best_bss = NULL; | |
876c9d3a | 1303 | |
fcdb53db | 1304 | mutex_lock(&adapter->lock); |
876c9d3a | 1305 | |
fcdb53db | 1306 | list_for_each_entry (iter_bss, &adapter->network_list, list) { |
876c9d3a | 1307 | switch (mode) { |
0dc5a290 DW |
1308 | case IW_MODE_INFRA: |
1309 | case IW_MODE_ADHOC: | |
fcdb53db DW |
1310 | if (!is_network_compatible(adapter, iter_bss, mode)) |
1311 | break; | |
1312 | if (SCAN_RSSI(iter_bss->rssi) <= bestrssi) | |
1313 | break; | |
1314 | bestrssi = SCAN_RSSI(iter_bss->rssi); | |
1315 | best_bss = iter_bss; | |
876c9d3a | 1316 | break; |
0dc5a290 | 1317 | case IW_MODE_AUTO: |
876c9d3a | 1318 | default: |
fcdb53db DW |
1319 | if (SCAN_RSSI(iter_bss->rssi) <= bestrssi) |
1320 | break; | |
1321 | bestrssi = SCAN_RSSI(iter_bss->rssi); | |
1322 | best_bss = iter_bss; | |
876c9d3a MT |
1323 | break; |
1324 | } | |
1325 | } | |
1326 | ||
fcdb53db DW |
1327 | mutex_unlock(&adapter->lock); |
1328 | return best_bss; | |
876c9d3a MT |
1329 | } |
1330 | ||
1331 | /** | |
1332 | * @brief Find the AP with specific ssid in the scan list | |
1333 | * | |
1334 | * @param priv A pointer to wlan_private structure | |
1335 | * @param pSSID A pointer to AP's ssid | |
1336 | * | |
1337 | * @return 0--success, otherwise--fail | |
1338 | */ | |
717c9339 | 1339 | int libertas_find_best_network_ssid(wlan_private * priv, |
d8efea25 | 1340 | u8 *out_ssid, u8 *out_ssid_len, u8 preferred_mode, u8 *out_mode) |
876c9d3a MT |
1341 | { |
1342 | wlan_adapter *adapter = priv->adapter; | |
fcdb53db DW |
1343 | int ret = -1; |
1344 | struct bss_descriptor * found; | |
876c9d3a | 1345 | |
9012b28a | 1346 | lbs_deb_enter(LBS_DEB_ASSOC); |
876c9d3a | 1347 | |
2be92196 | 1348 | wlan_scan_networks(priv, NULL, 1); |
876c9d3a MT |
1349 | if (adapter->surpriseremoved) |
1350 | return -1; | |
876c9d3a | 1351 | |
fcdb53db | 1352 | wait_event_interruptible(adapter->cmd_pending, !adapter->nr_cmd_pending); |
876c9d3a | 1353 | |
717c9339 | 1354 | found = libertas_find_best_ssid_in_list(adapter, preferred_mode); |
d8efea25 DW |
1355 | if (found && (found->ssid_len > 0)) { |
1356 | memcpy(out_ssid, &found->ssid, IW_ESSID_MAX_SIZE); | |
1357 | *out_ssid_len = found->ssid_len; | |
fcdb53db DW |
1358 | *out_mode = found->mode; |
1359 | ret = 0; | |
876c9d3a MT |
1360 | } |
1361 | ||
9012b28a | 1362 | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); |
876c9d3a MT |
1363 | return ret; |
1364 | } | |
1365 | ||
1366 | /** | |
1367 | * @brief Scan Network | |
1368 | * | |
1369 | * @param dev A pointer to net_device structure | |
1370 | * @param info A pointer to iw_request_info structure | |
1371 | * @param vwrq A pointer to iw_param structure | |
1372 | * @param extra A pointer to extra data buf | |
1373 | * | |
1374 | * @return 0 --success, otherwise fail | |
1375 | */ | |
1376 | int libertas_set_scan(struct net_device *dev, struct iw_request_info *info, | |
1377 | struct iw_param *vwrq, char *extra) | |
1378 | { | |
1379 | wlan_private *priv = dev->priv; | |
1380 | wlan_adapter *adapter = priv->adapter; | |
876c9d3a | 1381 | |
9012b28a | 1382 | lbs_deb_enter(LBS_DEB_SCAN); |
876c9d3a | 1383 | |
2be92196 | 1384 | wlan_scan_networks(priv, NULL, 0); |
876c9d3a MT |
1385 | |
1386 | if (adapter->surpriseremoved) | |
1387 | return -1; | |
1388 | ||
9012b28a | 1389 | lbs_deb_leave(LBS_DEB_SCAN); |
876c9d3a MT |
1390 | return 0; |
1391 | } | |
1392 | ||
1393 | /** | |
1394 | * @brief Send a scan command for all available channels filtered on a spec | |
1395 | * | |
1396 | * @param priv A pointer to wlan_private structure | |
1397 | * @param prequestedssid A pointer to AP's ssid | |
1398 | * @param keeppreviousscan Flag used to save/clear scan table before scan | |
1399 | * | |
1400 | * @return 0-success, otherwise fail | |
1401 | */ | |
717c9339 | 1402 | int libertas_send_specific_ssid_scan(wlan_private * priv, |
d8efea25 | 1403 | u8 *ssid, u8 ssid_len, u8 clear_ssid) |
876c9d3a MT |
1404 | { |
1405 | wlan_adapter *adapter = priv->adapter; | |
1406 | struct wlan_ioctl_user_scan_cfg scancfg; | |
eb8f7330 | 1407 | int ret = 0; |
876c9d3a | 1408 | |
9012b28a | 1409 | lbs_deb_enter(LBS_DEB_ASSOC); |
876c9d3a | 1410 | |
d8efea25 | 1411 | if (!ssid_len) |
eb8f7330 | 1412 | goto out; |
876c9d3a MT |
1413 | |
1414 | memset(&scancfg, 0x00, sizeof(scancfg)); | |
d8efea25 DW |
1415 | memcpy(scancfg.ssid, ssid, ssid_len); |
1416 | scancfg.ssid_len = ssid_len; | |
eb8f7330 | 1417 | scancfg.clear_ssid = clear_ssid; |
876c9d3a | 1418 | |
2be92196 | 1419 | wlan_scan_networks(priv, &scancfg, 1); |
876c9d3a MT |
1420 | if (adapter->surpriseremoved) |
1421 | return -1; | |
1422 | wait_event_interruptible(adapter->cmd_pending, !adapter->nr_cmd_pending); | |
1423 | ||
eb8f7330 | 1424 | out: |
9012b28a | 1425 | lbs_deb_leave(LBS_DEB_ASSOC); |
eb8f7330 | 1426 | return ret; |
876c9d3a MT |
1427 | } |
1428 | ||
1429 | /** | |
1430 | * @brief scan an AP with specific BSSID | |
1431 | * | |
1432 | * @param priv A pointer to wlan_private structure | |
1433 | * @param bssid A pointer to AP's bssid | |
1434 | * @param keeppreviousscan Flag used to save/clear scan table before scan | |
1435 | * | |
1436 | * @return 0-success, otherwise fail | |
1437 | */ | |
717c9339 | 1438 | int libertas_send_specific_bssid_scan(wlan_private * priv, u8 * bssid, u8 clear_bssid) |
876c9d3a MT |
1439 | { |
1440 | struct wlan_ioctl_user_scan_cfg scancfg; | |
1441 | ||
9012b28a | 1442 | lbs_deb_enter(LBS_DEB_ASSOC); |
876c9d3a | 1443 | |
eb8f7330 DW |
1444 | if (bssid == NULL) |
1445 | goto out; | |
876c9d3a MT |
1446 | |
1447 | memset(&scancfg, 0x00, sizeof(scancfg)); | |
eb8f7330 DW |
1448 | memcpy(scancfg.bssid, bssid, ETH_ALEN); |
1449 | scancfg.clear_bssid = clear_bssid; | |
876c9d3a | 1450 | |
2be92196 | 1451 | wlan_scan_networks(priv, &scancfg, 1); |
876c9d3a MT |
1452 | if (priv->adapter->surpriseremoved) |
1453 | return -1; | |
1454 | wait_event_interruptible(priv->adapter->cmd_pending, | |
1455 | !priv->adapter->nr_cmd_pending); | |
1456 | ||
eb8f7330 | 1457 | out: |
9012b28a | 1458 | lbs_deb_leave(LBS_DEB_ASSOC); |
876c9d3a MT |
1459 | return 0; |
1460 | } | |
1461 | ||
fcdb53db DW |
1462 | static inline char *libertas_translate_scan(wlan_private *priv, |
1463 | char *start, char *stop, | |
1464 | struct bss_descriptor *bss) | |
876c9d3a | 1465 | { |
876c9d3a | 1466 | wlan_adapter *adapter = priv->adapter; |
876c9d3a | 1467 | struct chan_freq_power *cfp; |
876c9d3a MT |
1468 | char *current_val; /* For rates */ |
1469 | struct iw_event iwe; /* Temporary buffer */ | |
876c9d3a | 1470 | int j; |
876c9d3a MT |
1471 | #define PERFECT_RSSI ((u8)50) |
1472 | #define WORST_RSSI ((u8)0) | |
1473 | #define RSSI_DIFF ((u8)(PERFECT_RSSI - WORST_RSSI)) | |
1474 | u8 rssi; | |
1475 | ||
fcdb53db DW |
1476 | cfp = libertas_find_cfp_by_band_and_channel(adapter, 0, bss->channel); |
1477 | if (!cfp) { | |
1478 | lbs_deb_scan("Invalid channel number %d\n", bss->channel); | |
1479 | return NULL; | |
2be92196 | 1480 | } |
876c9d3a | 1481 | |
fcdb53db DW |
1482 | /* First entry *MUST* be the AP BSSID */ |
1483 | iwe.cmd = SIOCGIWAP; | |
1484 | iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | |
1485 | memcpy(iwe.u.ap_addr.sa_data, &bss->bssid, ETH_ALEN); | |
1486 | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN); | |
1487 | ||
1488 | /* SSID */ | |
1489 | iwe.cmd = SIOCGIWESSID; | |
1490 | iwe.u.data.flags = 1; | |
d8efea25 DW |
1491 | iwe.u.data.length = min((u32) bss->ssid_len, (u32) IW_ESSID_MAX_SIZE); |
1492 | start = iwe_stream_add_point(start, stop, &iwe, bss->ssid); | |
fcdb53db DW |
1493 | |
1494 | /* Mode */ | |
1495 | iwe.cmd = SIOCGIWMODE; | |
1496 | iwe.u.mode = bss->mode; | |
1497 | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN); | |
1498 | ||
1499 | /* Frequency */ | |
1500 | iwe.cmd = SIOCGIWFREQ; | |
1501 | iwe.u.freq.m = (long)cfp->freq * 100000; | |
1502 | iwe.u.freq.e = 1; | |
1503 | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN); | |
1504 | ||
1505 | /* Add quality statistics */ | |
1506 | iwe.cmd = IWEVQUAL; | |
1507 | iwe.u.qual.updated = IW_QUAL_ALL_UPDATED; | |
1508 | iwe.u.qual.level = SCAN_RSSI(bss->rssi); | |
1509 | ||
1510 | rssi = iwe.u.qual.level - MRVDRV_NF_DEFAULT_SCAN_VALUE; | |
1511 | iwe.u.qual.qual = | |
1512 | (100 * RSSI_DIFF * RSSI_DIFF - (PERFECT_RSSI - rssi) * | |
1513 | (15 * (RSSI_DIFF) + 62 * (PERFECT_RSSI - rssi))) / | |
1514 | (RSSI_DIFF * RSSI_DIFF); | |
1515 | if (iwe.u.qual.qual > 100) | |
1516 | iwe.u.qual.qual = 100; | |
1517 | ||
1518 | if (adapter->NF[TYPE_BEACON][TYPE_NOAVG] == 0) { | |
1519 | iwe.u.qual.noise = MRVDRV_NF_DEFAULT_SCAN_VALUE; | |
1520 | } else { | |
1521 | iwe.u.qual.noise = | |
1522 | CAL_NF(adapter->NF[TYPE_BEACON][TYPE_NOAVG]); | |
1523 | } | |
80e78ef7 DW |
1524 | |
1525 | /* Locally created ad-hoc BSSs won't have beacons if this is the | |
1526 | * only station in the adhoc network; so get signal strength | |
1527 | * from receive statistics. | |
1528 | */ | |
1529 | if ((adapter->mode == IW_MODE_ADHOC) | |
1530 | && adapter->adhoccreate | |
717c9339 | 1531 | && !libertas_ssid_cmp(adapter->curbssparams.ssid, |
d8efea25 DW |
1532 | adapter->curbssparams.ssid_len, |
1533 | bss->ssid, bss->ssid_len)) { | |
80e78ef7 DW |
1534 | int snr, nf; |
1535 | snr = adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE; | |
1536 | nf = adapter->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE; | |
1537 | iwe.u.qual.level = CAL_RSSI(snr, nf); | |
fcdb53db DW |
1538 | } |
1539 | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN); | |
876c9d3a | 1540 | |
fcdb53db DW |
1541 | /* Add encryption capability */ |
1542 | iwe.cmd = SIOCGIWENCODE; | |
0c9ca690 | 1543 | if (bss->capability & WLAN_CAPABILITY_PRIVACY) { |
fcdb53db DW |
1544 | iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; |
1545 | } else { | |
1546 | iwe.u.data.flags = IW_ENCODE_DISABLED; | |
1547 | } | |
1548 | iwe.u.data.length = 0; | |
d8efea25 | 1549 | start = iwe_stream_add_point(start, stop, &iwe, bss->ssid); |
876c9d3a | 1550 | |
fcdb53db | 1551 | current_val = start + IW_EV_LCP_LEN; |
876c9d3a | 1552 | |
fcdb53db DW |
1553 | iwe.cmd = SIOCGIWRATE; |
1554 | iwe.u.bitrate.fixed = 0; | |
1555 | iwe.u.bitrate.disabled = 0; | |
1556 | iwe.u.bitrate.value = 0; | |
876c9d3a | 1557 | |
fcdb53db DW |
1558 | for (j = 0; j < sizeof(bss->libertas_supported_rates); j++) { |
1559 | u8 rate = bss->libertas_supported_rates[j]; | |
1560 | if (rate == 0) | |
1561 | break; /* no more rates */ | |
1562 | /* Bit rate given in 500 kb/s units (+ 0x80) */ | |
1563 | iwe.u.bitrate.value = (rate & 0x7f) * 500000; | |
1564 | current_val = iwe_stream_add_value(start, current_val, | |
1565 | stop, &iwe, IW_EV_PARAM_LEN); | |
1566 | } | |
1567 | if ((bss->mode == IW_MODE_ADHOC) | |
717c9339 | 1568 | && !libertas_ssid_cmp(adapter->curbssparams.ssid, |
d8efea25 DW |
1569 | adapter->curbssparams.ssid_len, |
1570 | bss->ssid, bss->ssid_len) | |
fcdb53db DW |
1571 | && adapter->adhoccreate) { |
1572 | iwe.u.bitrate.value = 22 * 500000; | |
1573 | current_val = iwe_stream_add_value(start, current_val, | |
1574 | stop, &iwe, IW_EV_PARAM_LEN); | |
1575 | } | |
1576 | /* Check if we added any event */ | |
1577 | if((current_val - start) > IW_EV_LCP_LEN) | |
1578 | start = current_val; | |
1579 | ||
1580 | memset(&iwe, 0, sizeof(iwe)); | |
1581 | if (bss->wpa_ie_len) { | |
1582 | char buf[MAX_WPA_IE_LEN]; | |
1583 | memcpy(buf, bss->wpa_ie, bss->wpa_ie_len); | |
1584 | iwe.cmd = IWEVGENIE; | |
1585 | iwe.u.data.length = bss->wpa_ie_len; | |
1586 | start = iwe_stream_add_point(start, stop, &iwe, buf); | |
1587 | } | |
876c9d3a | 1588 | |
fcdb53db DW |
1589 | memset(&iwe, 0, sizeof(iwe)); |
1590 | if (bss->rsn_ie_len) { | |
1591 | char buf[MAX_WPA_IE_LEN]; | |
1592 | memcpy(buf, bss->rsn_ie, bss->rsn_ie_len); | |
1593 | iwe.cmd = IWEVGENIE; | |
1594 | iwe.u.data.length = bss->rsn_ie_len; | |
1595 | start = iwe_stream_add_point(start, stop, &iwe, buf); | |
1596 | } | |
876c9d3a | 1597 | |
fcdb53db DW |
1598 | return start; |
1599 | } | |
876c9d3a | 1600 | |
fcdb53db DW |
1601 | /** |
1602 | * @brief Retrieve the scan table entries via wireless tools IOCTL call | |
1603 | * | |
1604 | * @param dev A pointer to net_device structure | |
1605 | * @param info A pointer to iw_request_info structure | |
1606 | * @param dwrq A pointer to iw_point structure | |
1607 | * @param extra A pointer to extra data buf | |
1608 | * | |
1609 | * @return 0 --success, otherwise fail | |
1610 | */ | |
1611 | int libertas_get_scan(struct net_device *dev, struct iw_request_info *info, | |
1612 | struct iw_point *dwrq, char *extra) | |
1613 | { | |
1614 | #define SCAN_ITEM_SIZE 128 | |
1615 | wlan_private *priv = dev->priv; | |
1616 | wlan_adapter *adapter = priv->adapter; | |
1617 | int err = 0; | |
1618 | char *ev = extra; | |
1619 | char *stop = ev + dwrq->length; | |
1620 | struct bss_descriptor * iter_bss; | |
1621 | struct bss_descriptor * safe; | |
876c9d3a | 1622 | |
fcdb53db | 1623 | lbs_deb_enter(LBS_DEB_ASSOC); |
876c9d3a | 1624 | |
fcdb53db DW |
1625 | /* If we've got an uncompleted scan, schedule the next part */ |
1626 | if (!adapter->nr_cmd_pending && adapter->last_scanned_channel) | |
1627 | wlan_scan_networks(priv, NULL, 0); | |
876c9d3a | 1628 | |
80e78ef7 | 1629 | /* Update RSSI if current BSS is a locally created ad-hoc BSS */ |
aeea0ab4 | 1630 | if ((adapter->mode == IW_MODE_ADHOC) && adapter->adhoccreate) { |
80e78ef7 DW |
1631 | libertas_prepare_and_send_command(priv, cmd_802_11_rssi, 0, |
1632 | cmd_option_waitforrsp, 0, NULL); | |
1633 | } | |
1634 | ||
fcdb53db DW |
1635 | mutex_lock(&adapter->lock); |
1636 | list_for_each_entry_safe (iter_bss, safe, &adapter->network_list, list) { | |
1637 | char * next_ev; | |
1638 | unsigned long stale_time; | |
876c9d3a | 1639 | |
fcdb53db DW |
1640 | if (stop - ev < SCAN_ITEM_SIZE) { |
1641 | err = -E2BIG; | |
1642 | break; | |
876c9d3a | 1643 | } |
876c9d3a | 1644 | |
fcdb53db DW |
1645 | /* Prune old an old scan result */ |
1646 | stale_time = iter_bss->last_scanned + DEFAULT_MAX_SCAN_AGE; | |
1647 | if (time_after(jiffies, stale_time)) { | |
1648 | list_move_tail (&iter_bss->list, | |
1649 | &adapter->network_free_list); | |
1650 | clear_bss_descriptor(iter_bss); | |
1651 | continue; | |
876c9d3a MT |
1652 | } |
1653 | ||
fcdb53db DW |
1654 | /* Translate to WE format this entry */ |
1655 | next_ev = libertas_translate_scan(priv, ev, stop, iter_bss); | |
1656 | if (next_ev == NULL) | |
1657 | continue; | |
1658 | ev = next_ev; | |
876c9d3a | 1659 | } |
fcdb53db | 1660 | mutex_unlock(&adapter->lock); |
876c9d3a | 1661 | |
fcdb53db | 1662 | dwrq->length = (ev - extra); |
876c9d3a MT |
1663 | dwrq->flags = 0; |
1664 | ||
9012b28a | 1665 | lbs_deb_leave(LBS_DEB_ASSOC); |
fcdb53db | 1666 | return err; |
876c9d3a MT |
1667 | } |
1668 | ||
1669 | /** | |
1670 | * @brief Prepare a scan command to be sent to the firmware | |
1671 | * | |
1672 | * Use the wlan_scan_cmd_config sent to the command processing module in | |
1673 | * the libertas_prepare_and_send_command to configure a cmd_ds_802_11_scan command | |
1674 | * struct to send to firmware. | |
1675 | * | |
1676 | * The fixed fields specifying the BSS type and BSSID filters as well as a | |
1677 | * variable number/length of TLVs are sent in the command to firmware. | |
1678 | * | |
1679 | * @param priv A pointer to wlan_private structure | |
1680 | * @param cmd A pointer to cmd_ds_command structure to be sent to | |
1681 | * firmware with the cmd_DS_801_11_SCAN structure | |
1682 | * @param pdata_buf Void pointer cast of a wlan_scan_cmd_config struct used | |
1683 | * to set the fields/TLVs for the command sent to firmware | |
1684 | * | |
1685 | * @return 0 or -1 | |
1686 | * | |
1687 | * @sa wlan_scan_create_channel_list | |
1688 | */ | |
1689 | int libertas_cmd_80211_scan(wlan_private * priv, | |
1690 | struct cmd_ds_command *cmd, void *pdata_buf) | |
1691 | { | |
1692 | struct cmd_ds_802_11_scan *pscan = &cmd->params.scan; | |
1693 | struct wlan_scan_cmd_config *pscancfg; | |
1694 | ||
9012b28a | 1695 | lbs_deb_enter(LBS_DEB_ASSOC); |
876c9d3a MT |
1696 | |
1697 | pscancfg = pdata_buf; | |
1698 | ||
1699 | /* Set fixed field variables in scan command */ | |
1700 | pscan->bsstype = pscancfg->bsstype; | |
eb8f7330 | 1701 | memcpy(pscan->BSSID, pscancfg->bssid, sizeof(pscan->BSSID)); |
876c9d3a MT |
1702 | memcpy(pscan->tlvbuffer, pscancfg->tlvbuffer, pscancfg->tlvbufferlen); |
1703 | ||
1704 | cmd->command = cpu_to_le16(cmd_802_11_scan); | |
1705 | ||
1706 | /* size is equal to the sizeof(fixed portions) + the TLV len + header */ | |
1707 | cmd->size = cpu_to_le16(sizeof(pscan->bsstype) | |
1708 | + sizeof(pscan->BSSID) | |
1709 | + pscancfg->tlvbufferlen + S_DS_GEN); | |
1710 | ||
9012b28a | 1711 | lbs_deb_scan("SCAN_CMD: command=%x, size=%x, seqnum=%x\n", |
981f187b DW |
1712 | le16_to_cpu(cmd->command), le16_to_cpu(cmd->size), |
1713 | le16_to_cpu(cmd->seqnum)); | |
9012b28a HS |
1714 | |
1715 | lbs_deb_leave(LBS_DEB_ASSOC); | |
876c9d3a MT |
1716 | return 0; |
1717 | } | |
1718 | ||
fcdb53db DW |
1719 | static inline int is_same_network(struct bss_descriptor *src, |
1720 | struct bss_descriptor *dst) | |
1721 | { | |
1722 | /* A network is only a duplicate if the channel, BSSID, and ESSID | |
1723 | * all match. We treat all <hidden> with the same BSSID and channel | |
1724 | * as one network */ | |
d8efea25 | 1725 | return ((src->ssid_len == dst->ssid_len) && |
fcdb53db DW |
1726 | (src->channel == dst->channel) && |
1727 | !compare_ether_addr(src->bssid, dst->bssid) && | |
d8efea25 | 1728 | !memcmp(src->ssid, dst->ssid, src->ssid_len)); |
fcdb53db DW |
1729 | } |
1730 | ||
876c9d3a MT |
1731 | /** |
1732 | * @brief This function handles the command response of scan | |
1733 | * | |
1734 | * The response buffer for the scan command has the following | |
1735 | * memory layout: | |
1736 | * | |
1737 | * .-----------------------------------------------------------. | |
1738 | * | header (4 * sizeof(u16)): Standard command response hdr | | |
1739 | * .-----------------------------------------------------------. | |
1740 | * | bufsize (u16) : sizeof the BSS Description data | | |
1741 | * .-----------------------------------------------------------. | |
1742 | * | NumOfSet (u8) : Number of BSS Descs returned | | |
1743 | * .-----------------------------------------------------------. | |
1744 | * | BSSDescription data (variable, size given in bufsize) | | |
1745 | * .-----------------------------------------------------------. | |
1746 | * | TLV data (variable, size calculated using header->size, | | |
1747 | * | bufsize and sizeof the fixed fields above) | | |
1748 | * .-----------------------------------------------------------. | |
1749 | * | |
1750 | * @param priv A pointer to wlan_private structure | |
1751 | * @param resp A pointer to cmd_ds_command | |
1752 | * | |
1753 | * @return 0 or -1 | |
1754 | */ | |
1755 | int libertas_ret_80211_scan(wlan_private * priv, struct cmd_ds_command *resp) | |
1756 | { | |
1757 | wlan_adapter *adapter = priv->adapter; | |
1758 | struct cmd_ds_802_11_scan_rsp *pscan; | |
876c9d3a MT |
1759 | struct mrvlietypes_data *ptlv; |
1760 | struct mrvlietypes_tsftimestamp *ptsftlv; | |
fcdb53db DW |
1761 | struct bss_descriptor * iter_bss; |
1762 | struct bss_descriptor * safe; | |
876c9d3a MT |
1763 | u8 *pbssinfo; |
1764 | u16 scanrespsize; | |
1765 | int bytesleft; | |
876c9d3a MT |
1766 | int idx; |
1767 | int tlvbufsize; | |
9012b28a | 1768 | int ret; |
876c9d3a | 1769 | |
9012b28a | 1770 | lbs_deb_enter(LBS_DEB_ASSOC); |
876c9d3a | 1771 | |
fcdb53db DW |
1772 | /* Prune old entries from scan table */ |
1773 | list_for_each_entry_safe (iter_bss, safe, &adapter->network_list, list) { | |
1774 | unsigned long stale_time = iter_bss->last_scanned + DEFAULT_MAX_SCAN_AGE; | |
1775 | if (time_before(jiffies, stale_time)) | |
1776 | continue; | |
1777 | list_move_tail (&iter_bss->list, &adapter->network_free_list); | |
1778 | clear_bss_descriptor(iter_bss); | |
1779 | } | |
1780 | ||
876c9d3a MT |
1781 | pscan = &resp->params.scanresp; |
1782 | ||
fcdb53db DW |
1783 | if (pscan->nr_sets > MAX_NETWORK_COUNT) { |
1784 | lbs_deb_scan( | |
1785 | "SCAN_RESP: too many scan results (%d, max %d)!!\n", | |
1786 | pscan->nr_sets, MAX_NETWORK_COUNT); | |
9012b28a HS |
1787 | ret = -1; |
1788 | goto done; | |
876c9d3a MT |
1789 | } |
1790 | ||
1791 | bytesleft = le16_to_cpu(pscan->bssdescriptsize); | |
9012b28a | 1792 | lbs_deb_scan("SCAN_RESP: bssdescriptsize %d\n", bytesleft); |
876c9d3a MT |
1793 | |
1794 | scanrespsize = le16_to_cpu(resp->size); | |
9012b28a | 1795 | lbs_deb_scan("SCAN_RESP: returned %d AP before parsing\n", |
876c9d3a MT |
1796 | pscan->nr_sets); |
1797 | ||
876c9d3a MT |
1798 | pbssinfo = pscan->bssdesc_and_tlvbuffer; |
1799 | ||
1800 | /* The size of the TLV buffer is equal to the entire command response | |
1801 | * size (scanrespsize) minus the fixed fields (sizeof()'s), the | |
1802 | * BSS Descriptions (bssdescriptsize as bytesLef) and the command | |
1803 | * response header (S_DS_GEN) | |
1804 | */ | |
1805 | tlvbufsize = scanrespsize - (bytesleft + sizeof(pscan->bssdescriptsize) | |
1806 | + sizeof(pscan->nr_sets) | |
1807 | + S_DS_GEN); | |
1808 | ||
1809 | ptlv = (struct mrvlietypes_data *) (pscan->bssdesc_and_tlvbuffer + bytesleft); | |
1810 | ||
1811 | /* Search the TLV buffer space in the scan response for any valid TLVs */ | |
1812 | wlan_ret_802_11_scan_get_tlv_ptrs(ptlv, tlvbufsize, &ptsftlv); | |
1813 | ||
1814 | /* | |
1815 | * Process each scan response returned (pscan->nr_sets). Save | |
1816 | * the information in the newbssentry and then insert into the | |
1817 | * driver scan table either as an update to an existing entry | |
1818 | * or as an addition at the end of the table | |
1819 | */ | |
1820 | for (idx = 0; idx < pscan->nr_sets && bytesleft; idx++) { | |
fcdb53db DW |
1821 | struct bss_descriptor new; |
1822 | struct bss_descriptor * found = NULL; | |
fcdb53db | 1823 | struct bss_descriptor * oldest = NULL; |
876c9d3a MT |
1824 | |
1825 | /* Process the data fields and IEs returned for this BSS */ | |
fcdb53db DW |
1826 | memset(&new, 0, sizeof (struct bss_descriptor)); |
1827 | if (libertas_process_bss(&new, &pbssinfo, &bytesleft) != 0) { | |
1828 | /* error parsing the scan response, skipped */ | |
1829 | lbs_deb_scan("SCAN_RESP: process_bss returned ERROR\n"); | |
1830 | continue; | |
1831 | } | |
876c9d3a | 1832 | |
fcdb53db DW |
1833 | /* Try to find this bss in the scan table */ |
1834 | list_for_each_entry (iter_bss, &adapter->network_list, list) { | |
1835 | if (is_same_network(iter_bss, &new)) { | |
1836 | found = iter_bss; | |
1837 | break; | |
876c9d3a MT |
1838 | } |
1839 | ||
fcdb53db DW |
1840 | if ((oldest == NULL) || |
1841 | (iter_bss->last_scanned < oldest->last_scanned)) | |
1842 | oldest = iter_bss; | |
1843 | } | |
876c9d3a | 1844 | |
fcdb53db DW |
1845 | if (found) { |
1846 | /* found, clear it */ | |
1847 | clear_bss_descriptor(found); | |
1848 | } else if (!list_empty(&adapter->network_free_list)) { | |
1849 | /* Pull one from the free list */ | |
1850 | found = list_entry(adapter->network_free_list.next, | |
1851 | struct bss_descriptor, list); | |
1852 | list_move_tail(&found->list, &adapter->network_list); | |
1853 | } else if (oldest) { | |
1854 | /* If there are no more slots, expire the oldest */ | |
1855 | found = oldest; | |
1856 | clear_bss_descriptor(found); | |
1857 | list_move_tail(&found->list, &adapter->network_list); | |
876c9d3a | 1858 | } else { |
fcdb53db DW |
1859 | continue; |
1860 | } | |
876c9d3a | 1861 | |
fcdb53db DW |
1862 | lbs_deb_scan("SCAN_RESP: BSSID = " MAC_FMT "\n", |
1863 | new.bssid[0], new.bssid[1], new.bssid[2], | |
1864 | new.bssid[3], new.bssid[4], new.bssid[5]); | |
1865 | ||
1866 | /* | |
1867 | * If the TSF TLV was appended to the scan results, save the | |
1868 | * this entries TSF value in the networktsf field. The | |
1869 | * networktsf is the firmware's TSF value at the time the | |
1870 | * beacon or probe response was received. | |
1871 | */ | |
1872 | if (ptsftlv) { | |
981f187b | 1873 | new.networktsf = le64_to_cpup(&ptsftlv->tsftable[idx]); |
876c9d3a | 1874 | } |
876c9d3a | 1875 | |
fcdb53db DW |
1876 | /* Copy the locally created newbssentry to the scan table */ |
1877 | memcpy(found, &new, offsetof(struct bss_descriptor, list)); | |
1878 | } | |
876c9d3a | 1879 | |
9012b28a | 1880 | ret = 0; |
876c9d3a | 1881 | |
9012b28a HS |
1882 | done: |
1883 | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); | |
1884 | return ret; | |
876c9d3a | 1885 | } |