[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / net / wireless / Kconfig

#
# Wireless LAN device configuration
#

menuconfig WLAN
	bool "Wireless LAN"
	depends on !S390
	---help---
	  This section contains all the pre 802.11 and 802.11 wireless
	  device drivers. For a complete list of drivers and documentation
	  on them refer to the wireless wiki:

	  http://wireless.kernel.org/en/users/Drivers

if WLAN

menuconfig WLAN_PRE80211
	bool "Wireless LAN (pre-802.11)"
	depends on NETDEVICES
	---help---
	  Say Y if you have any pre-802.11 wireless LAN hardware.

	  This option does not affect the kernel build, it only
	  lets you choose drivers.

config STRIP
	tristate "STRIP (Metricom starmode radio IP)"
	depends on INET && WLAN_PRE80211
	select WIRELESS_EXT
	---help---
	  Say Y if you have a Metricom radio and intend to use Starmode Radio
	  IP. STRIP is a radio protocol developed for the MosquitoNet project
	  (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
	  traffic using Metricom radios.  Metricom radios are small, battery
	  powered, 100kbit/sec packet radio transceivers, about the size and
	  weight of a cellular telephone. (You may also have heard them called
	  "Metricom modems" but we avoid the term "modem" because it misleads
	  many people into thinking that you can plug a Metricom modem into a
	  phone line and use it as a modem.)

	  You can use STRIP on any Linux machine with a serial port, although
	  it is obviously most useful for people with laptop computers. If you
	  think you might get a Metricom radio in the future, there is no harm
	  in saying Y to STRIP now, except that it makes the kernel a bit
	  bigger.

	  To compile this as a module, choose M here: the module will be
	  called strip.

config ARLAN
	tristate "Aironet Arlan 655 & IC2200 DS support"
	depends on ISA && !64BIT && WLAN_PRE80211
	select WIRELESS_EXT
	---help---
	  Aironet makes Arlan, a class of wireless LAN adapters. These use the
	  www.Telxon.com chip, which is also used on several similar cards.
	  This driver is tested on the 655 and IC2200 series cards. Look at
	  <http://www.ylenurme.ee/~elmer/655/> for the latest information.

	  The driver is built as two modules, arlan and arlan-proc. The latter
	  is the /proc interface and is not needed most of time.

	  On some computers the card ends up in non-valid state after some
	  time. Use a ping-reset script to clear it.

config WAVELAN
	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
	depends on ISA && WLAN_PRE80211
	select WIRELESS_EXT
	---help---
	  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
	  a Radio LAN (wireless Ethernet-like Local Area Network) using the
	  radio frequencies 900 MHz and 2.4 GHz.

	  If you want to use an ISA WaveLAN card under Linux, say Y and read
	  the Ethernet-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>. Some more specific
	  information is contained in
	  <file:Documentation/networking/wavelan.txt> and in the source code
	  <file:drivers/net/wireless/wavelan.p.h>.

	  You will also need the wireless tools package available from
	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
	  Please read the man pages contained therein.

	  To compile this driver as a module, choose M here: the module will be
	  called wavelan.

config PCMCIA_WAVELAN
	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
	depends on PCMCIA && WLAN_PRE80211
	select WIRELESS_EXT
	help
	  Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
	  (PC-card) wireless Ethernet networking card to your computer.  This
	  driver is for the non-IEEE-802.11 Wavelan cards.

	  To compile this driver as a module, choose M here: the module will be
	  called wavelan_cs.  If unsure, say N.

config PCMCIA_NETWAVE
	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
	depends on PCMCIA && WLAN_PRE80211
	select WIRELESS_EXT
	help
	  Say Y here if you intend to attach this type of PCMCIA (PC-card)
	  wireless Ethernet networking card to your computer.

	  To compile this driver as a module, choose M here: the module will be
	  called netwave_cs.  If unsure, say N.


menuconfig WLAN_80211
	bool "Wireless LAN (IEEE 802.11)"
	depends on NETDEVICES
	---help---
	  Say Y if you have any 802.11 wireless LAN hardware.

	  This option does not affect the kernel build, it only
	  lets you choose drivers.

config PCMCIA_RAYCS
	tristate "Aviator/Raytheon 2.4GHz wireless support"
	depends on PCMCIA && WLAN_80211
	select WIRELESS_EXT
	---help---
	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
	  (PC-card) wireless Ethernet networking card to your computer.
	  Please read the file <file:Documentation/networking/ray_cs.txt> for
	  details.

	  To compile this driver as a module, choose M here: the module will be
	  called ray_cs.  If unsure, say N.

config LIBERTAS
	tristate "Marvell 8xxx Libertas WLAN driver support"
	depends on WLAN_80211
	select WIRELESS_EXT
	select LIB80211
	select FW_LOADER
	---help---
	  A library for Marvell Libertas 8xxx devices.

config LIBERTAS_USB
	tristate "Marvell Libertas 8388 USB 802.11b/g cards"
	depends on LIBERTAS && USB
	---help---
	  A driver for Marvell Libertas 8388 USB devices.

config LIBERTAS_CS
	tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
	depends on LIBERTAS && PCMCIA
	select FW_LOADER
	---help---
	  A driver for Marvell Libertas 8385 CompactFlash devices.

config LIBERTAS_SDIO
	tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
	depends on LIBERTAS && MMC
	---help---
	  A driver for Marvell Libertas 8385/8686/8688 SDIO devices.

config LIBERTAS_SPI
	tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
	depends on LIBERTAS && SPI
	---help---
	  A driver for Marvell Libertas 8686 SPI devices.

config LIBERTAS_DEBUG
	bool "Enable full debugging output in the Libertas module."
	depends on LIBERTAS
	---help---
	  Debugging support.

config LIBERTAS_THINFIRM
	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
	depends on WLAN_80211 && MAC80211
	select FW_LOADER
	---help---
	  A library for Marvell Libertas 8xxx devices using thinfirm.

config LIBERTAS_THINFIRM_USB
	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
	depends on LIBERTAS_THINFIRM && USB
	---help---
	  A driver for Marvell Libertas 8388 USB devices using thinfirm.

config AIRO
	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
	depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
	select WIRELESS_EXT
	select CRYPTO
	---help---
	  This is the standard Linux driver to support Cisco/Aironet ISA and
	  PCI 802.11 wireless cards.
	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	  - with or without encryption) as well as card before the Cisco
	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).

	  This driver support both the standard Linux Wireless Extensions
	  and Cisco proprietary API, so both the Linux Wireless Tools and the
	  Cisco Linux utilities can be used to configure the card.

	  The driver can be compiled as a module and will be named "airo".

config ATMEL
      tristate "Atmel at76c50x chipset  802.11b support"
      depends on (PCI || PCMCIA) && WLAN_80211
      select WIRELESS_EXT
      select FW_LOADER
      select CRC32
       ---help---
        A driver 802.11b wireless cards based on the Atmel fast-vnet
        chips. This driver supports standard Linux wireless extensions.

        Many  cards based on this chipset do not have flash memory
        and need their firmware loaded at start-up. If yours is
        one of these, you will need to provide a firmware image
        to be loaded into the card by the driver. The Atmel
        firmware package can be downloaded from
        <http://www.thekelleys.org.uk/atmel>

config PCI_ATMEL
      tristate "Atmel at76c506 PCI cards"
      depends on ATMEL && PCI
       ---help---
        Enable support for PCI and mini-PCI cards containing the
        Atmel at76c506 chip.

config PCMCIA_ATMEL
	tristate "Atmel at76c502/at76c504 PCMCIA cards"
	depends on ATMEL && PCMCIA
	select WIRELESS_EXT
	select FW_LOADER
	select CRC32
	---help---
	  Enable support for PCMCIA cards containing the
	  Atmel at76c502 and at76c504 chips.

config AT76C50X_USB
        tristate "Atmel at76c503/at76c505/at76c505a USB cards"
        depends on MAC80211 && WLAN_80211 && USB
        select FW_LOADER
        ---help---
          Enable support for USB Wireless devices using Atmel at76c503,
          at76c505 or at76c505a chips.

config AIRO_CS
	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
	depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
	select WIRELESS_EXT
	select CRYPTO
	select CRYPTO_AES
	---help---
	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
	  802.11 wireless cards.  This driver is the same as the Aironet
	  driver part of the Linux Pcmcia package.
	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	  - with or without encryption) as well as card before the Cisco
	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
	  802.11b cards.

	  This driver support both the standard Linux Wireless Extensions
	  and Cisco proprietary API, so both the Linux Wireless Tools and the
	  Cisco Linux utilities can be used to configure the card.

config PCMCIA_WL3501
      tristate "Planet WL3501 PCMCIA cards"
      depends on EXPERIMENTAL && PCMCIA && WLAN_80211
      select WIRELESS_EXT
       ---help---
         A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
	 It has basic support for Linux wireless extensions and initial
	 micro support for ethtool.

config PRISM54
	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
	depends on PCI && EXPERIMENTAL && WLAN_80211
	select WIRELESS_EXT
	select FW_LOADER
	---help---
	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
	  driver is now deprecated in favor for the SoftMAC driver, p54pci.
	  p54pci supports FullMAC PCI/Cardbus devices as well. For details on
	  the scheduled removal of this driver on the kernel see the feature
	  removal schedule:

	  Documentation/feature-removal-schedule.txt

	  For more information refer to the p54 wiki:

	  http://wireless.kernel.org/en/users/Drivers/p54

	  Note: You need a motherboard with DMA support to use any of these cards

	  When built as module you get the module prism54

config USB_ZD1201
	tristate "USB ZD1201 based Wireless device support"
	depends on USB && WLAN_80211
	select WIRELESS_EXT
	select FW_LOADER
	---help---
	  Say Y if you want to use wireless LAN adapters based on the ZyDAS
	  ZD1201 chip.

	  This driver makes the adapter appear as a normal Ethernet interface,
	  typically on wlan0.

	  The zd1201 device requires external firmware to be loaded.
	  This can be found at http://linux-lc100020.sourceforge.net/

	  To compile this driver as a module, choose M here: the
	  module will be called zd1201.

config USB_NET_RNDIS_WLAN
	tristate "Wireless RNDIS USB support"
	depends on USB && WLAN_80211 && EXPERIMENTAL
	depends on CFG80211
	select USB_USBNET
	select USB_NET_CDCETHER
	select USB_NET_RNDIS_HOST
	---help---
	  This is a driver for wireless RNDIS devices.
	  These are USB based adapters found in devices such as:

	  Buffalo WLI-U2-KG125S
	  U.S. Robotics USR5421
	  Belkin F5D7051
	  Linksys WUSB54GSv2
	  Linksys WUSB54GSC
	  Asus WL169gE
	  Eminent EM4045
	  BT Voyager 1055
	  Linksys WUSB54GSv1
	  U.S. Robotics USR5420
	  BUFFALO WLI-USB-G54

	  All of these devices are based on Broadcom 4320 chip which is the
	  only wireless RNDIS chip known to date.

	  If you choose to build a module, it'll be called rndis_wlan.

config RTL8180
	tristate "Realtek 8180/8185 PCI support"
	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	select EEPROM_93CX6
	---help---
	  This is a driver for RTL8180 and RTL8185 based cards.
	  These are PCI based chips found in cards such as:

	  (RTL8185 802.11g)
	  A-Link WL54PC

	  (RTL8180 802.11b)
	  Belkin F5D6020 v3
	  Belkin F5D6020 v3
	  Dlink DWL-610
	  Dlink DWL-510
	  Netgear MA521
	  Level-One WPC-0101
	  Acer Aspire 1357 LMi
	  VCTnet PC-11B1
	  Ovislink AirLive WL-1120PCM
	  Mentor WL-PCI
	  Linksys WPC11 v4
	  TrendNET TEW-288PI
	  D-Link DWL-520 Rev D
	  Repotec RP-WP7126
	  TP-Link TL-WN250/251
	  Zonet ZEW1000
	  Longshine LCS-8031-R
	  HomeLine HLW-PCC200
	  GigaFast WF721-AEX
	  Planet WL-3553
	  Encore ENLWI-PCI1-NT
	  TrendNET TEW-266PC
	  Gigabyte GN-WLMR101
	  Siemens-fujitsu Amilo D1840W
	  Edimax EW-7126
	  PheeNet WL-11PCIR
	  Tonze PC-2100T
	  Planet WL-8303
	  Dlink DWL-650 v M1
	  Edimax EW-7106
	  Q-Tec 770WC
	  Topcom Skyr@cer 4011b
	  Roper FreeLan 802.11b (edition 2004)
	  Wistron Neweb Corp CB-200B
	  Pentagram HorNET
	  QTec 775WC
	  TwinMOS Booming B Series
	  Micronet SP906BB
	  Sweex LC700010
	  Surecom EP-9428
	  Safecom SWLCR-1100

	  Thanks to Realtek for their support!

config RTL8187
	tristate "Realtek 8187 and 8187B USB support"
	depends on MAC80211 && USB && WLAN_80211
	select EEPROM_93CX6
	---help---
	  This is a driver for RTL8187 and RTL8187B based cards.
	  These are USB based chips found in devices such as:

	  Netgear WG111v2
	  Level 1 WNC-0301USB
	  Micronet SP907GK V5
	  Encore ENUWI-G2
	  Trendnet TEW-424UB
	  ASUS P5B Deluxe/P5K Premium motherboards
	  Toshiba Satellite Pro series of laptops
	  Asus Wireless Link
	  Linksys WUSB54GC-EU v2
	    (v1 = rt73usb; v3 is rt2070-based,
	     use staging/rt3070 or try rt2800usb)

	  Thanks to Realtek for their support!

# If possible, automatically enable LEDs for RTL8187.

config RTL8187_LEDS
	bool
	depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = RTL8187)
	default y

config ADM8211
	tristate "ADMtek ADM8211 support"
	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	select CRC32
	select EEPROM_93CX6
	---help---
	  This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
	  These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:

	  Xterasys Cardbus XN-2411b
	  Blitz NetWave Point PC
	  TrendNet 221pc
	  Belkin F5D6001
	  SMC 2635W
	  Linksys WPC11 v1
	  Fiberline FL-WL-200X
	  3com Office Connect (3CRSHPW796)
	  Corega WLPCIB-11
	  SMC 2602W V2 EU
	  D-Link DWL-520 Revision C

	  However, some of these cards have been replaced with other chips
	  like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
	  the Ralink RT2400 (SMC2635W) without a model number change.

	  Thanks to Infineon-ADMtek for their support of this driver.

config MAC80211_HWSIM
	tristate "Simulated radio testing tool for mac80211"
	depends on MAC80211 && WLAN_80211
	---help---
	  This driver is a developer testing tool that can be used to test
	  IEEE 802.11 networking stack (mac80211) functionality. This is not
	  needed for normal wireless LAN usage and is only for testing. See
	  Documentation/networking/mac80211_hwsim for more information on how
	  to use this tool.

	  To compile this driver as a module, choose M here: the module will be
	  called mac80211_hwsim.  If unsure, say N.

config MWL8K
	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	---help---
	  This driver supports Marvell TOPDOG 802.11 wireless cards.

	  To compile this driver as a module, choose M here: the module
	  will be called mwl8k.  If unsure, say N.

source "drivers/net/wireless/p54/Kconfig"
source "drivers/net/wireless/ath/Kconfig"
source "drivers/net/wireless/ipw2x00/Kconfig"
source "drivers/net/wireless/iwlwifi/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/b43/Kconfig"
source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
source "drivers/net/wireless/rt2x00/Kconfig"
source "drivers/net/wireless/orinoco/Kconfig"
source "drivers/net/wireless/wl12xx/Kconfig"
source "drivers/net/wireless/iwmc3200wifi/Kconfig"

endif # WLAN
Commit	Line	Data
1da177e4 LT	1	#
	2	# Wireless LAN device configuration
	3	#
	4
44175272 LR	5	menuconfig WLAN
44175272 LR	6	bool "Wireless LAN"
f54bfc0e	7	depends on !S390
44175272 LR	8	---help---
	9	This section contains all the pre 802.11 and 802.11 wireless
	10	device drivers. For a complete list of drivers and documentation
	11	on them refer to the wireless wiki:
	12
	13	http://wireless.kernel.org/en/users/Drivers
	14
	15	if WLAN
1da177e4	16
3e640452	17	menuconfig WLAN_PRE80211
2a5e1c0e JB	18	bool "Wireless LAN (pre-802.11)"
2a5e1c0e JB	19	depends on NETDEVICES
711e2c33	20	---help---
2a5e1c0e	21	Say Y if you have any pre-802.11 wireless LAN hardware.
711e2c33	22
2a5e1c0e	23	This option does not affect the kernel build, it only
42431592	24	lets you choose drivers.
1da177e4	25
a60f28fa DM	26	config STRIP
	27	tristate "STRIP (Metricom starmode radio IP)"
	28	depends on INET && WLAN_PRE80211
	29	select WIRELESS_EXT
	30	---help---
	31	Say Y if you have a Metricom radio and intend to use Starmode Radio
	32	IP. STRIP is a radio protocol developed for the MosquitoNet project
	33	(on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
	34	traffic using Metricom radios. Metricom radios are small, battery
	35	powered, 100kbit/sec packet radio transceivers, about the size and
	36	weight of a cellular telephone. (You may also have heard them called
	37	"Metricom modems" but we avoid the term "modem" because it misleads
	38	many people into thinking that you can plug a Metricom modem into a
	39	phone line and use it as a modem.)
	40
	41	You can use STRIP on any Linux machine with a serial port, although
	42	it is obviously most useful for people with laptop computers. If you
	43	think you might get a Metricom radio in the future, there is no harm
	44	in saying Y to STRIP now, except that it makes the kernel a bit
	45	bigger.
	46
	47	To compile this as a module, choose M here: the module will be
	48	called strip.
	49
1da177e4 LT	50	config ARLAN
1da177e4 LT	51	tristate "Aironet Arlan 655 & IC2200 DS support"
2a5e1c0e JB	52	depends on ISA && !64BIT && WLAN_PRE80211
2a5e1c0e JB	53	select WIRELESS_EXT
1da177e4 LT	54	---help---
	55	Aironet makes Arlan, a class of wireless LAN adapters. These use the
	56	www.Telxon.com chip, which is also used on several similar cards.
	57	This driver is tested on the 655 and IC2200 series cards. Look at
	58	<http://www.ylenurme.ee/~elmer/655/> for the latest information.
	59
	60	The driver is built as two modules, arlan and arlan-proc. The latter
	61	is the /proc interface and is not needed most of time.
	62
	63	On some computers the card ends up in non-valid state after some
	64	time. Use a ping-reset script to clear it.
	65
	66	config WAVELAN
	67	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
2a5e1c0e JB	68	depends on ISA && WLAN_PRE80211
2a5e1c0e JB	69	select WIRELESS_EXT
1da177e4 LT	70	---help---
	71	The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
	72	a Radio LAN (wireless Ethernet-like Local Area Network) using the
	73	radio frequencies 900 MHz and 2.4 GHz.
	74
1da177e4 LT	75	If you want to use an ISA WaveLAN card under Linux, say Y and read
	76	the Ethernet-HOWTO, available from
	77	<http://www.tldp.org/docs.html#howto>. Some more specific
	78	information is contained in
	79	<file:Documentation/networking/wavelan.txt> and in the source code
889c94a1	80	<file:drivers/net/wireless/wavelan.p.h>.
1da177e4 LT	81
	82	You will also need the wireless tools package available from
	83	<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
	84	Please read the man pages contained therein.
	85
	86	To compile this driver as a module, choose M here: the module will be
	87	called wavelan.
	88
	89	config PCMCIA_WAVELAN
	90	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
2a5e1c0e JB	91	depends on PCMCIA && WLAN_PRE80211
2a5e1c0e JB	92	select WIRELESS_EXT
1da177e4 LT	93	help
	94	Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
	95	(PC-card) wireless Ethernet networking card to your computer. This
	96	driver is for the non-IEEE-802.11 Wavelan cards.
	97
	98	To compile this driver as a module, choose M here: the module will be
	99	called wavelan_cs. If unsure, say N.
	100
	101	config PCMCIA_NETWAVE
	102	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
2a5e1c0e JB	103	depends on PCMCIA && WLAN_PRE80211
2a5e1c0e JB	104	select WIRELESS_EXT
1da177e4 LT	105	help
	106	Say Y here if you intend to attach this type of PCMCIA (PC-card)
	107	wireless Ethernet networking card to your computer.
	108
	109	To compile this driver as a module, choose M here: the module will be
	110	called netwave_cs. If unsure, say N.
	111
2a5e1c0e	112
3e640452	113	menuconfig WLAN_80211
2a5e1c0e JB	114	bool "Wireless LAN (IEEE 802.11)"
	115	depends on NETDEVICES
	116	---help---
	117	Say Y if you have any 802.11 wireless LAN hardware.
	118
	119	This option does not affect the kernel build, it only
42431592	120	lets you choose drivers.
1da177e4 LT	121
1da177e4 LT	122	config PCMCIA_RAYCS
8476a657	123	tristate "Aviator/Raytheon 2.4GHz wireless support"
2a5e1c0e JB	124	depends on PCMCIA && WLAN_80211
2a5e1c0e JB	125	select WIRELESS_EXT
1da177e4 LT	126	---help---
	127	Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
	128	(PC-card) wireless Ethernet networking card to your computer.
	129	Please read the file <file:Documentation/networking/ray_cs.txt> for
	130	details.
	131
	132	To compile this driver as a module, choose M here: the module will be
	133	called ray_cs. If unsure, say N.
	134
084708b6 HS	135	config LIBERTAS
	136	tristate "Marvell 8xxx Libertas WLAN driver support"
	137	depends on WLAN_80211
aaf44a06	138	select WIRELESS_EXT
7e272fcf	139	select LIB80211
876c9d3a	140	select FW_LOADER
084708b6 HS	141	---help---
	142	A library for Marvell Libertas 8xxx devices.
	143
	144	config LIBERTAS_USB
	145	tristate "Marvell Libertas 8388 USB 802.11b/g cards"
	146	depends on LIBERTAS && USB
876c9d3a MT	147	---help---
	148	A driver for Marvell Libertas 8388 USB devices.
	149
27590d06 HS	150	config LIBERTAS_CS
27590d06 HS	151	tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
7d579611	152	depends on LIBERTAS && PCMCIA
27590d06 HS	153	select FW_LOADER
	154	---help---
	155	A driver for Marvell Libertas 8385 CompactFlash devices.
	156
727c26ed	157	config LIBERTAS_SDIO
e45d8e53	158	tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
727c26ed PO	159	depends on LIBERTAS && MMC
727c26ed PO	160	---help---
e45d8e53	161	A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
727c26ed	162
d2b21f19 CM	163	config LIBERTAS_SPI
d2b21f19 CM	164	tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
4d1d4985	165	depends on LIBERTAS && SPI
d2b21f19 CM	166	---help---
	167	A driver for Marvell Libertas 8686 SPI devices.
	168
084708b6 HS	169	config LIBERTAS_DEBUG
	170	bool "Enable full debugging output in the Libertas module."
	171	depends on LIBERTAS
876c9d3a MT	172	---help---
	173	Debugging support.
	174
d9c63504 LCC	175	config LIBERTAS_THINFIRM
	176	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
	177	depends on WLAN_80211 && MAC80211
	178	select FW_LOADER
	179	---help---
	180	A library for Marvell Libertas 8xxx devices using thinfirm.
	181
	182	config LIBERTAS_THINFIRM_USB
	183	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
	184	depends on LIBERTAS_THINFIRM && USB
	185	---help---
	186	A driver for Marvell Libertas 8388 USB devices using thinfirm.
	187
1da177e4 LT	188	config AIRO
1da177e4 LT	189	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
2a5e1c0e JB	190	depends on ISA_DMA_API && WLAN_80211 && (PCI \|\| BROKEN)
2a5e1c0e JB	191	select WIRELESS_EXT
a39d3e79	192	select CRYPTO
1da177e4 LT	193	---help---
	194	This is the standard Linux driver to support Cisco/Aironet ISA and
	195	PCI 802.11 wireless cards.
	196	It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	197	- with or without encryption) as well as card before the Cisco
47c51431	198	acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
1da177e4 LT	199
	200	This driver support both the standard Linux Wireless Extensions
	201	and Cisco proprietary API, so both the Linux Wireless Tools and the
	202	Cisco Linux utilities can be used to configure the card.
	203
	204	The driver can be compiled as a module and will be named "airo".
	205
e12dcb05 FL	206	config ATMEL
	207	tristate "Atmel at76c50x chipset 802.11b support"
	208	depends on (PCI \|\| PCMCIA) && WLAN_80211
	209	select WIRELESS_EXT
	210	select FW_LOADER
	211	select CRC32
	212	---help---
	213	A driver 802.11b wireless cards based on the Atmel fast-vnet
	214	chips. This driver supports standard Linux wireless extensions.
	215
	216	Many cards based on this chipset do not have flash memory
	217	and need their firmware loaded at start-up. If yours is
	218	one of these, you will need to provide a firmware image
	219	to be loaded into the card by the driver. The Atmel
	220	firmware package can be downloaded from
	221	<http://www.thekelleys.org.uk/atmel>
	222
	223	config PCI_ATMEL
	224	tristate "Atmel at76c506 PCI cards"
	225	depends on ATMEL && PCI
	226	---help---
	227	Enable support for PCI and mini-PCI cards containing the
	228	Atmel at76c506 chip.
	229
	230	config PCMCIA_ATMEL
	231	tristate "Atmel at76c502/at76c504 PCMCIA cards"
	232	depends on ATMEL && PCMCIA
	233	select WIRELESS_EXT
	234	select FW_LOADER
	235	select CRC32
	236	---help---
	237	Enable support for PCMCIA cards containing the
	238	Atmel at76c502 and at76c504 chips.
	239
1264b951 KV	240	config AT76C50X_USB
	241	tristate "Atmel at76c503/at76c505/at76c505a USB cards"
	242	depends on MAC80211 && WLAN_80211 && USB
	243	select FW_LOADER
	244	---help---
	245	Enable support for USB Wireless devices using Atmel at76c503,
	246	at76c505 or at76c505a chips.
	247
1da177e4 LT	248	config AIRO_CS
1da177e4 LT	249	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
2a5e1c0e JB	250	depends on PCMCIA && (BROKEN \|\| !M32R) && WLAN_80211
2a5e1c0e JB	251	select WIRELESS_EXT
a39d3e79	252	select CRYPTO
8fa9ea18	253	select CRYPTO_AES
1da177e4 LT	254	---help---
	255	This is the standard Linux driver to support Cisco/Aironet PCMCIA
	256	802.11 wireless cards. This driver is the same as the Aironet
	257	driver part of the Linux Pcmcia package.
	258	It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	259	- with or without encryption) as well as card before the Cisco
47c51431	260	acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
1da177e4 LT	261	supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
	262	802.11b cards.
	263
	264	This driver support both the standard Linux Wireless Extensions
	265	and Cisco proprietary API, so both the Linux Wireless Tools and the
	266	Cisco Linux utilities can be used to configure the card.
	267
1da177e4 LT	268	config PCMCIA_WL3501
1da177e4 LT	269	tristate "Planet WL3501 PCMCIA cards"
2a5e1c0e JB	270	depends on EXPERIMENTAL && PCMCIA && WLAN_80211
2a5e1c0e JB	271	select WIRELESS_EXT
1da177e4 LT	272	---help---
	273	A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
	274	It has basic support for Linux wireless extensions and initial
	275	micro support for ethtool.
	276
1da177e4	277	config PRISM54
4d8cd268	278	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
2a5e1c0e JB	279	depends on PCI && EXPERIMENTAL && WLAN_80211
2a5e1c0e JB	280	select WIRELESS_EXT
1da177e4 LT	281	select FW_LOADER
1da177e4 LT	282	---help---
4d8cd268 LR	283	This enables support for FullMAC PCI/Cardbus prism54 devices. This
	284	driver is now deprecated in favor for the SoftMAC driver, p54pci.
	285	p54pci supports FullMAC PCI/Cardbus devices as well. For details on
	286	the scheduled removal of this driver on the kernel see the feature
	287	removal schedule:
	288
	289	Documentation/feature-removal-schedule.txt
	290
	291	For more information refer to the p54 wiki:
	292
	293	http://wireless.kernel.org/en/users/Drivers/p54
	294
	295	Note: You need a motherboard with DMA support to use any of these cards
	296
	297	When built as module you get the module prism54
1da177e4	298
5c601d0c PM	299	config USB_ZD1201
5c601d0c PM	300	tristate "USB ZD1201 based Wireless device support"
2a5e1c0e JB	301	depends on USB && WLAN_80211
2a5e1c0e JB	302	select WIRELESS_EXT
5c601d0c PM	303	select FW_LOADER
	304	---help---
	305	Say Y if you want to use wireless LAN adapters based on the ZyDAS
	306	ZD1201 chip.
	307
	308	This driver makes the adapter appear as a normal Ethernet interface,
	309	typically on wlan0.
	310
	311	The zd1201 device requires external firmware to be loaded.
	312	This can be found at http://linux-lc100020.sourceforge.net/
	313
	314	To compile this driver as a module, choose M here: the
	315	module will be called zd1201.
	316
bf164cc0 JK	317	config USB_NET_RNDIS_WLAN
	318	tristate "Wireless RNDIS USB support"
	319	depends on USB && WLAN_80211 && EXPERIMENTAL
0aa8204b	320	depends on CFG80211
bf164cc0 JK	321	select USB_USBNET
	322	select USB_NET_CDCETHER
	323	select USB_NET_RNDIS_HOST
bf164cc0 JK	324	---help---
	325	This is a driver for wireless RNDIS devices.
	326	These are USB based adapters found in devices such as:
	327
	328	Buffalo WLI-U2-KG125S
	329	U.S. Robotics USR5421
	330	Belkin F5D7051
	331	Linksys WUSB54GSv2
	332	Linksys WUSB54GSC
	333	Asus WL169gE
	334	Eminent EM4045
	335	BT Voyager 1055
	336	Linksys WUSB54GSv1
	337	U.S. Robotics USR5420
	338	BUFFALO WLI-USB-G54
	339
	340	All of these devices are based on Broadcom 4320 chip which is the
	341	only wireless RNDIS chip known to date.
	342
	343	If you choose to build a module, it'll be called rndis_wlan.
	344
f6532111 MW	345	config RTL8180
	346	tristate "Realtek 8180/8185 PCI support"
	347	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	348	select EEPROM_93CX6
	349	---help---
	350	This is a driver for RTL8180 and RTL8185 based cards.
	351	These are PCI based chips found in cards such as:
	352
	353	(RTL8185 802.11g)
	354	A-Link WL54PC
	355
	356	(RTL8180 802.11b)
	357	Belkin F5D6020 v3
	358	Belkin F5D6020 v3
	359	Dlink DWL-610
	360	Dlink DWL-510
	361	Netgear MA521
	362	Level-One WPC-0101
	363	Acer Aspire 1357 LMi
	364	VCTnet PC-11B1
	365	Ovislink AirLive WL-1120PCM
	366	Mentor WL-PCI
	367	Linksys WPC11 v4
	368	TrendNET TEW-288PI
	369	D-Link DWL-520 Rev D
	370	Repotec RP-WP7126
	371	TP-Link TL-WN250/251
	372	Zonet ZEW1000
	373	Longshine LCS-8031-R
	374	HomeLine HLW-PCC200
	375	GigaFast WF721-AEX
	376	Planet WL-3553
	377	Encore ENLWI-PCI1-NT
	378	TrendNET TEW-266PC
	379	Gigabyte GN-WLMR101
	380	Siemens-fujitsu Amilo D1840W
	381	Edimax EW-7126
	382	PheeNet WL-11PCIR
	383	Tonze PC-2100T
	384	Planet WL-8303
	385	Dlink DWL-650 v M1
	386	Edimax EW-7106
	387	Q-Tec 770WC
	388	Topcom Skyr@cer 4011b
	389	Roper FreeLan 802.11b (edition 2004)
	390	Wistron Neweb Corp CB-200B
	391	Pentagram HorNET
	392	QTec 775WC
	393	TwinMOS Booming B Series
	394	Micronet SP906BB
	395	Sweex LC700010
	396	Surecom EP-9428
	397	Safecom SWLCR-1100
	398
	399	Thanks to Realtek for their support!
	400
605bebe2	401	config RTL8187
5c036b21	402	tristate "Realtek 8187 and 8187B USB support"
c8f96974	403	depends on MAC80211 && USB && WLAN_80211
605bebe2 MW	404	select EEPROM_93CX6
605bebe2 MW	405	---help---
5c036b21 HTL	406	This is a driver for RTL8187 and RTL8187B based cards.
5c036b21 HTL	407	These are USB based chips found in devices such as:
605bebe2 MW	408
605bebe2 MW	409	Netgear WG111v2
5c036b21 HTL	410	Level 1 WNC-0301USB
	411	Micronet SP907GK V5
	412	Encore ENUWI-G2
	413	Trendnet TEW-424UB
256fc960	414	ASUS P5B Deluxe/P5K Premium motherboards
5c036b21	415	Toshiba Satellite Pro series of laptops
7c7e6af3	416	Asus Wireless Link
f874011b	417	Linksys WUSB54GC-EU v2
256fc960 HTL	418	(v1 = rt73usb; v3 is rt2070-based,
256fc960 HTL	419	use staging/rt3070 or try rt2800usb)
605bebe2 MW	420
	421	Thanks to Realtek for their support!
	422
a027087a LF	423	# If possible, automatically enable LEDs for RTL8187.
	424
	425	config RTL8187_LEDS
	426	bool
	427	depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y \|\| LEDS_CLASS = RTL8187)
	428	default y
	429
cc0b88cf MW	430	config ADM8211
	431	tristate "ADMtek ADM8211 support"
	432	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	433	select CRC32
	434	select EEPROM_93CX6
	435	---help---
	436	This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
	437	These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
	438
	439	Xterasys Cardbus XN-2411b
	440	Blitz NetWave Point PC
	441	TrendNet 221pc
	442	Belkin F5D6001
	443	SMC 2635W
	444	Linksys WPC11 v1
	445	Fiberline FL-WL-200X
	446	3com Office Connect (3CRSHPW796)
	447	Corega WLPCIB-11
	448	SMC 2602W V2 EU
	449	D-Link DWL-520 Revision C
	450
	451	However, some of these cards have been replaced with other chips
	452	like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
	453	the Ralink RT2400 (SMC2635W) without a model number change.
	454
	455	Thanks to Infineon-ADMtek for their support of this driver.
	456
acc1e7a3 JM	457	config MAC80211_HWSIM
	458	tristate "Simulated radio testing tool for mac80211"
	459	depends on MAC80211 && WLAN_80211
	460	---help---
	461	This driver is a developer testing tool that can be used to test
	462	IEEE 802.11 networking stack (mac80211) functionality. This is not
	463	needed for normal wireless LAN usage and is only for testing. See
	464	Documentation/networking/mac80211_hwsim for more information on how
	465	to use this tool.
	466
	467	To compile this driver as a module, choose M here: the module will be
	468	called mac80211_hwsim. If unsure, say N.
	469
a66098da LB	470	config MWL8K
	471	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
	472	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
	473	---help---
	474	This driver supports Marvell TOPDOG 802.11 wireless cards.
	475
	476	To compile this driver as a module, choose M here: the module
	477	will be called mwl8k. If unsure, say N.
	478
fb269710	479	source "drivers/net/wireless/p54/Kconfig"
3a702e49	480	source "drivers/net/wireless/ath/Kconfig"
0795cd29	481	source "drivers/net/wireless/ipw2x00/Kconfig"
b481de9c	482	source "drivers/net/wireless/iwlwifi/Kconfig"
ff1d2767	483	source "drivers/net/wireless/hostap/Kconfig"
e4d6b795	484	source "drivers/net/wireless/b43/Kconfig"
75388acd	485	source "drivers/net/wireless/b43legacy/Kconfig"
e85d0918	486	source "drivers/net/wireless/zd1211rw/Kconfig"
95ea3627	487	source "drivers/net/wireless/rt2x00/Kconfig"
49c1d208	488	source "drivers/net/wireless/orinoco/Kconfig"
2f01a1f5	489	source "drivers/net/wireless/wl12xx/Kconfig"
bb9f8692	490	source "drivers/net/wireless/iwmc3200wifi/Kconfig"
70e5e983	491
44175272	492	endif # WLAN