Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*------------------------------------------------------------------------ |
2 | . smc91x.h - macros for SMSC's 91C9x/91C1xx single-chip Ethernet device. | |
3 | . | |
4 | . Copyright (C) 1996 by Erik Stahlman | |
5 | . Copyright (C) 2001 Standard Microsystems Corporation | |
6 | . Developed by Simple Network Magic Corporation | |
7 | . Copyright (C) 2003 Monta Vista Software, Inc. | |
8 | . Unified SMC91x driver by Nicolas Pitre | |
9 | . | |
10 | . This program is free software; you can redistribute it and/or modify | |
11 | . it under the terms of the GNU General Public License as published by | |
12 | . the Free Software Foundation; either version 2 of the License, or | |
13 | . (at your option) any later version. | |
14 | . | |
15 | . This program is distributed in the hope that it will be useful, | |
16 | . but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | . GNU General Public License for more details. | |
19 | . | |
20 | . You should have received a copy of the GNU General Public License | |
21 | . along with this program; if not, write to the Free Software | |
22 | . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
23 | . | |
24 | . Information contained in this file was obtained from the LAN91C111 | |
25 | . manual from SMC. To get a copy, if you really want one, you can find | |
26 | . information under www.smsc.com. | |
27 | . | |
28 | . Authors | |
29 | . Erik Stahlman <erik@vt.edu> | |
30 | . Daris A Nevil <dnevil@snmc.com> | |
31 | . Nicolas Pitre <nico@cam.org> | |
32 | . | |
33 | ---------------------------------------------------------------------------*/ | |
34 | #ifndef _SMC91X_H_ | |
35 | #define _SMC91X_H_ | |
36 | ||
3e947943 | 37 | #include <linux/smc91x.h> |
1da177e4 LT |
38 | |
39 | /* | |
40 | * Define your architecture specific bus configuration parameters here. | |
41 | */ | |
42 | ||
38fd6c38 | 43 | #if defined(CONFIG_ARCH_LUBBOCK) ||\ |
88c36eb7 | 44 | defined(CONFIG_MACH_MAINSTONE) ||\ |
e1719da6 | 45 | defined(CONFIG_MACH_ZYLONITE) ||\ |
175ff20f MZ |
46 | defined(CONFIG_MACH_LITTLETON) ||\ |
47 | defined(CONFIG_ARCH_VIPER) | |
1da177e4 | 48 | |
38fd6c38 EM |
49 | #include <asm/mach-types.h> |
50 | ||
51 | /* Now the bus width is specified in the platform data | |
52 | * pretend here to support all I/O access types | |
53 | */ | |
54 | #define SMC_CAN_USE_8BIT 1 | |
1da177e4 | 55 | #define SMC_CAN_USE_16BIT 1 |
38fd6c38 | 56 | #define SMC_CAN_USE_32BIT 1 |
1da177e4 LT |
57 | #define SMC_NOWAIT 1 |
58 | ||
3aed74cd | 59 | #define SMC_IO_SHIFT (lp->io_shift) |
1da177e4 | 60 | |
38fd6c38 | 61 | #define SMC_inb(a, r) readb((a) + (r)) |
1da177e4 | 62 | #define SMC_inw(a, r) readw((a) + (r)) |
38fd6c38 EM |
63 | #define SMC_inl(a, r) readl((a) + (r)) |
64 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
65 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
1da177e4 LT |
66 | #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) |
67 | #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) | |
38fd6c38 EM |
68 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) |
69 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) | |
e7b3dc7e | 70 | #define SMC_IRQ_FLAGS (-1) /* from resource */ |
1da177e4 | 71 | |
38fd6c38 EM |
72 | /* We actually can't write halfwords properly if not word aligned */ |
73 | static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg) | |
74 | { | |
75 | if (machine_is_mainstone() && reg & 2) { | |
76 | unsigned int v = val << 16; | |
77 | v |= readl(ioaddr + (reg & ~2)) & 0xffff; | |
78 | writel(v, ioaddr + (reg & ~2)); | |
79 | } else { | |
80 | writew(val, ioaddr + reg); | |
81 | } | |
82 | } | |
83 | ||
95af9feb | 84 | #elif defined(CONFIG_BLACKFIN) |
0851a284 WB |
85 | |
86 | #define SMC_IRQ_FLAGS IRQF_TRIGGER_HIGH | |
c5760abd JCR |
87 | #define RPC_LSA_DEFAULT RPC_LED_100_10 |
88 | #define RPC_LSB_DEFAULT RPC_LED_TX_RX | |
0851a284 | 89 | |
0851a284 WB |
90 | #define SMC_CAN_USE_8BIT 0 |
91 | #define SMC_CAN_USE_16BIT 1 | |
a61fc1e9 | 92 | # if defined(CONFIG_BF561) |
0851a284 | 93 | #define SMC_CAN_USE_32BIT 1 |
0851a284 | 94 | # else |
0851a284 | 95 | #define SMC_CAN_USE_32BIT 0 |
a61fc1e9 | 96 | # endif |
0851a284 WB |
97 | #define SMC_IO_SHIFT 0 |
98 | #define SMC_NOWAIT 1 | |
99 | #define SMC_USE_BFIN_DMA 0 | |
100 | ||
a61fc1e9 MF |
101 | #define SMC_inw(a, r) readw((a) + (r)) |
102 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
103 | #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) | |
104 | #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) | |
105 | # if SMC_CAN_USE_32BIT | |
106 | #define SMC_inl(a, r) readl((a) + (r)) | |
107 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
108 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) | |
109 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) | |
0851a284 | 110 | # endif |
a61fc1e9 | 111 | |
1da177e4 LT |
112 | #elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6) |
113 | ||
114 | /* We can only do 16-bit reads and writes in the static memory space. */ | |
115 | #define SMC_CAN_USE_8BIT 0 | |
116 | #define SMC_CAN_USE_16BIT 1 | |
117 | #define SMC_CAN_USE_32BIT 0 | |
118 | #define SMC_NOWAIT 1 | |
119 | ||
120 | #define SMC_IO_SHIFT 0 | |
121 | ||
122 | #define SMC_inw(a, r) in_be16((volatile u16 *)((a) + (r))) | |
123 | #define SMC_outw(v, a, r) out_be16((volatile u16 *)((a) + (r)), v) | |
124 | #define SMC_insw(a, r, p, l) \ | |
125 | do { \ | |
126 | unsigned long __port = (a) + (r); \ | |
127 | u16 *__p = (u16 *)(p); \ | |
128 | int __l = (l); \ | |
129 | insw(__port, __p, __l); \ | |
130 | while (__l > 0) { \ | |
131 | *__p = swab16(*__p); \ | |
132 | __p++; \ | |
133 | __l--; \ | |
134 | } \ | |
135 | } while (0) | |
136 | #define SMC_outsw(a, r, p, l) \ | |
137 | do { \ | |
138 | unsigned long __port = (a) + (r); \ | |
139 | u16 *__p = (u16 *)(p); \ | |
140 | int __l = (l); \ | |
141 | while (__l > 0) { \ | |
142 | /* Believe it or not, the swab isn't needed. */ \ | |
143 | outw( /* swab16 */ (*__p++), __port); \ | |
144 | __l--; \ | |
145 | } \ | |
146 | } while (0) | |
9ded96f2 | 147 | #define SMC_IRQ_FLAGS (0) |
1da177e4 LT |
148 | |
149 | #elif defined(CONFIG_SA1100_PLEB) | |
150 | /* We can only do 16-bit reads and writes in the static memory space. */ | |
151 | #define SMC_CAN_USE_8BIT 1 | |
152 | #define SMC_CAN_USE_16BIT 1 | |
153 | #define SMC_CAN_USE_32BIT 0 | |
154 | #define SMC_IO_SHIFT 0 | |
155 | #define SMC_NOWAIT 1 | |
156 | ||
1cf99be5 RK |
157 | #define SMC_inb(a, r) readb((a) + (r)) |
158 | #define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) | |
159 | #define SMC_inw(a, r) readw((a) + (r)) | |
160 | #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) | |
161 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
162 | #define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) | |
163 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
164 | #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) | |
1da177e4 | 165 | |
e7b3dc7e | 166 | #define SMC_IRQ_FLAGS (-1) |
1da177e4 LT |
167 | |
168 | #elif defined(CONFIG_SA1100_ASSABET) | |
169 | ||
a09e64fb | 170 | #include <mach/neponset.h> |
1da177e4 LT |
171 | |
172 | /* We can only do 8-bit reads and writes in the static memory space. */ | |
173 | #define SMC_CAN_USE_8BIT 1 | |
174 | #define SMC_CAN_USE_16BIT 0 | |
175 | #define SMC_CAN_USE_32BIT 0 | |
176 | #define SMC_NOWAIT 1 | |
177 | ||
178 | /* The first two address lines aren't connected... */ | |
179 | #define SMC_IO_SHIFT 2 | |
180 | ||
181 | #define SMC_inb(a, r) readb((a) + (r)) | |
182 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
183 | #define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) | |
184 | #define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) | |
e7b3dc7e | 185 | #define SMC_IRQ_FLAGS (-1) /* from resource */ |
1da177e4 | 186 | |
b0348b90 LB |
187 | #elif defined(CONFIG_MACH_LOGICPD_PXA270) |
188 | ||
189 | #define SMC_CAN_USE_8BIT 0 | |
190 | #define SMC_CAN_USE_16BIT 1 | |
191 | #define SMC_CAN_USE_32BIT 0 | |
192 | #define SMC_IO_SHIFT 0 | |
193 | #define SMC_NOWAIT 1 | |
b0348b90 | 194 | |
b0348b90 | 195 | #define SMC_inw(a, r) readw((a) + (r)) |
b0348b90 | 196 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) |
b0348b90 LB |
197 | #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) |
198 | #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) | |
199 | ||
1da177e4 | 200 | #elif defined(CONFIG_ARCH_INNOKOM) || \ |
1da177e4 | 201 | defined(CONFIG_ARCH_PXA_IDP) || \ |
4f15a980 RS |
202 | defined(CONFIG_ARCH_RAMSES) || \ |
203 | defined(CONFIG_ARCH_PCM027) | |
1da177e4 LT |
204 | |
205 | #define SMC_CAN_USE_8BIT 1 | |
206 | #define SMC_CAN_USE_16BIT 1 | |
207 | #define SMC_CAN_USE_32BIT 1 | |
208 | #define SMC_IO_SHIFT 0 | |
209 | #define SMC_NOWAIT 1 | |
210 | #define SMC_USE_PXA_DMA 1 | |
211 | ||
212 | #define SMC_inb(a, r) readb((a) + (r)) | |
213 | #define SMC_inw(a, r) readw((a) + (r)) | |
214 | #define SMC_inl(a, r) readl((a) + (r)) | |
215 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
216 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
217 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) | |
218 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) | |
e7b3dc7e | 219 | #define SMC_IRQ_FLAGS (-1) /* from resource */ |
1da177e4 LT |
220 | |
221 | /* We actually can't write halfwords properly if not word aligned */ | |
222 | static inline void | |
eb1d6988 | 223 | SMC_outw(u16 val, void __iomem *ioaddr, int reg) |
1da177e4 LT |
224 | { |
225 | if (reg & 2) { | |
226 | unsigned int v = val << 16; | |
227 | v |= readl(ioaddr + (reg & ~2)) & 0xffff; | |
228 | writel(v, ioaddr + (reg & ~2)); | |
229 | } else { | |
230 | writew(val, ioaddr + reg); | |
231 | } | |
232 | } | |
233 | ||
234 | #elif defined(CONFIG_ARCH_OMAP) | |
235 | ||
236 | /* We can only do 16-bit reads and writes in the static memory space. */ | |
237 | #define SMC_CAN_USE_8BIT 0 | |
238 | #define SMC_CAN_USE_16BIT 1 | |
239 | #define SMC_CAN_USE_32BIT 0 | |
240 | #define SMC_IO_SHIFT 0 | |
241 | #define SMC_NOWAIT 1 | |
242 | ||
1da177e4 LT |
243 | #define SMC_inw(a, r) readw((a) + (r)) |
244 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
245 | #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) | |
246 | #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) | |
e7b3dc7e | 247 | #define SMC_IRQ_FLAGS (-1) /* from resource */ |
5f13e7ec | 248 | |
1da177e4 LT |
249 | #elif defined(CONFIG_SH_SH4202_MICRODEV) |
250 | ||
251 | #define SMC_CAN_USE_8BIT 0 | |
252 | #define SMC_CAN_USE_16BIT 1 | |
253 | #define SMC_CAN_USE_32BIT 0 | |
254 | ||
255 | #define SMC_inb(a, r) inb((a) + (r) - 0xa0000000) | |
256 | #define SMC_inw(a, r) inw((a) + (r) - 0xa0000000) | |
257 | #define SMC_inl(a, r) inl((a) + (r) - 0xa0000000) | |
258 | #define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000) | |
259 | #define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000) | |
260 | #define SMC_outl(v, a, r) outl(v, (a) + (r) - 0xa0000000) | |
261 | #define SMC_insl(a, r, p, l) insl((a) + (r) - 0xa0000000, p, l) | |
262 | #define SMC_outsl(a, r, p, l) outsl((a) + (r) - 0xa0000000, p, l) | |
263 | #define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l) | |
264 | #define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l) | |
265 | ||
9ded96f2 | 266 | #define SMC_IRQ_FLAGS (0) |
1da177e4 | 267 | |
1da177e4 LT |
268 | #elif defined(CONFIG_M32R) |
269 | ||
270 | #define SMC_CAN_USE_8BIT 0 | |
271 | #define SMC_CAN_USE_16BIT 1 | |
272 | #define SMC_CAN_USE_32BIT 0 | |
273 | ||
59dc76a4 | 274 | #define SMC_inb(a, r) inb(((u32)a) + (r)) |
f3ac9fbf HT |
275 | #define SMC_inw(a, r) inw(((u32)a) + (r)) |
276 | #define SMC_outb(v, a, r) outb(v, ((u32)a) + (r)) | |
277 | #define SMC_outw(v, a, r) outw(v, ((u32)a) + (r)) | |
278 | #define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l) | |
279 | #define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l) | |
1da177e4 | 280 | |
9ded96f2 | 281 | #define SMC_IRQ_FLAGS (0) |
1da177e4 LT |
282 | |
283 | #define RPC_LSA_DEFAULT RPC_LED_TX_RX | |
284 | #define RPC_LSB_DEFAULT RPC_LED_100_10 | |
285 | ||
d4adcffb MS |
286 | #elif defined(CONFIG_MACH_LPD79520) \ |
287 | || defined(CONFIG_MACH_LPD7A400) \ | |
288 | || defined(CONFIG_MACH_LPD7A404) | |
1da177e4 | 289 | |
d4adcffb MS |
290 | /* The LPD7X_IOBARRIER is necessary to overcome a mismatch between the |
291 | * way that the CPU handles chip selects and the way that the SMC chip | |
292 | * expects the chip select to operate. Refer to | |
1da177e4 | 293 | * Documentation/arm/Sharp-LH/IOBarrier for details. The read from |
d4adcffb MS |
294 | * IOBARRIER is a byte, in order that we read the least-common |
295 | * denominator. It would be wasteful to read 32 bits from an 8-bit | |
296 | * accessible region. | |
1da177e4 LT |
297 | * |
298 | * There is no explicit protection against interrupts intervening | |
299 | * between the writew and the IOBARRIER. In SMC ISR there is a | |
300 | * preamble that performs an IOBARRIER in the extremely unlikely event | |
301 | * that the driver interrupts itself between a writew to the chip an | |
302 | * the IOBARRIER that follows *and* the cache is large enough that the | |
303 | * first off-chip access while handing the interrupt is to the SMC | |
304 | * chip. Other devices in the same address space as the SMC chip must | |
305 | * be aware of the potential for trouble and perform a similar | |
306 | * IOBARRIER on entry to their ISR. | |
307 | */ | |
308 | ||
a09e64fb | 309 | #include <mach/constants.h> /* IOBARRIER_VIRT */ |
1da177e4 LT |
310 | |
311 | #define SMC_CAN_USE_8BIT 0 | |
312 | #define SMC_CAN_USE_16BIT 1 | |
313 | #define SMC_CAN_USE_32BIT 0 | |
314 | #define SMC_NOWAIT 0 | |
d4adcffb | 315 | #define LPD7X_IOBARRIER readb (IOBARRIER_VIRT) |
1da177e4 | 316 | |
d4adcffb MS |
317 | #define SMC_inw(a,r)\ |
318 | ({ unsigned short v = readw ((void*) ((a) + (r))); LPD7X_IOBARRIER; v; }) | |
319 | #define SMC_outw(v,a,r) ({ writew ((v), (a) + (r)); LPD7X_IOBARRIER; }) | |
1da177e4 | 320 | |
d4adcffb MS |
321 | #define SMC_insw LPD7_SMC_insw |
322 | static inline void LPD7_SMC_insw (unsigned char* a, int r, | |
323 | unsigned char* p, int l) | |
324 | { | |
325 | unsigned short* ps = (unsigned short*) p; | |
326 | while (l-- > 0) { | |
327 | *ps++ = readw (a + r); | |
328 | LPD7X_IOBARRIER; | |
329 | } | |
330 | } | |
09779c6d | 331 | |
d4adcffb MS |
332 | #define SMC_outsw LPD7_SMC_outsw |
333 | static inline void LPD7_SMC_outsw (unsigned char* a, int r, | |
334 | unsigned char* p, int l) | |
1da177e4 LT |
335 | { |
336 | unsigned short* ps = (unsigned short*) p; | |
337 | while (l-- > 0) { | |
338 | writew (*ps++, a + r); | |
d4adcffb | 339 | LPD7X_IOBARRIER; |
1da177e4 LT |
340 | } |
341 | } | |
342 | ||
d4adcffb | 343 | #define SMC_INTERRUPT_PREAMBLE LPD7X_IOBARRIER |
1da177e4 LT |
344 | |
345 | #define RPC_LSA_DEFAULT RPC_LED_TX_RX | |
346 | #define RPC_LSB_DEFAULT RPC_LED_100_10 | |
347 | ||
55793455 PP |
348 | #elif defined(CONFIG_SOC_AU1X00) |
349 | ||
350 | #include <au1xxx.h> | |
351 | ||
352 | /* We can only do 16-bit reads and writes in the static memory space. */ | |
353 | #define SMC_CAN_USE_8BIT 0 | |
354 | #define SMC_CAN_USE_16BIT 1 | |
355 | #define SMC_CAN_USE_32BIT 0 | |
356 | #define SMC_IO_SHIFT 0 | |
357 | #define SMC_NOWAIT 1 | |
358 | ||
359 | #define SMC_inw(a, r) au_readw((unsigned long)((a) + (r))) | |
360 | #define SMC_insw(a, r, p, l) \ | |
361 | do { \ | |
362 | unsigned long _a = (unsigned long)((a) + (r)); \ | |
363 | int _l = (l); \ | |
364 | u16 *_p = (u16 *)(p); \ | |
365 | while (_l-- > 0) \ | |
366 | *_p++ = au_readw(_a); \ | |
367 | } while(0) | |
368 | #define SMC_outw(v, a, r) au_writew(v, (unsigned long)((a) + (r))) | |
369 | #define SMC_outsw(a, r, p, l) \ | |
370 | do { \ | |
371 | unsigned long _a = (unsigned long)((a) + (r)); \ | |
372 | int _l = (l); \ | |
373 | const u16 *_p = (const u16 *)(p); \ | |
374 | while (_l-- > 0) \ | |
375 | au_writew(*_p++ , _a); \ | |
376 | } while(0) | |
377 | ||
9ded96f2 | 378 | #define SMC_IRQ_FLAGS (0) |
33fee56a DS |
379 | |
380 | #elif defined(CONFIG_ARCH_VERSATILE) | |
381 | ||
382 | #define SMC_CAN_USE_8BIT 1 | |
383 | #define SMC_CAN_USE_16BIT 1 | |
384 | #define SMC_CAN_USE_32BIT 1 | |
385 | #define SMC_NOWAIT 1 | |
386 | ||
387 | #define SMC_inb(a, r) readb((a) + (r)) | |
388 | #define SMC_inw(a, r) readw((a) + (r)) | |
389 | #define SMC_inl(a, r) readl((a) + (r)) | |
390 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
391 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
392 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
393 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) | |
394 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) | |
e7b3dc7e | 395 | #define SMC_IRQ_FLAGS (-1) /* from resource */ |
55793455 | 396 | |
b920de1b DH |
397 | #elif defined(CONFIG_MN10300) |
398 | ||
399 | /* | |
400 | * MN10300/AM33 configuration | |
401 | */ | |
402 | ||
403 | #include <asm/unit/smc91111.h> | |
404 | ||
1da177e4 LT |
405 | #else |
406 | ||
b920de1b DH |
407 | /* |
408 | * Default configuration | |
409 | */ | |
410 | ||
1da177e4 LT |
411 | #define SMC_CAN_USE_8BIT 1 |
412 | #define SMC_CAN_USE_16BIT 1 | |
413 | #define SMC_CAN_USE_32BIT 1 | |
414 | #define SMC_NOWAIT 1 | |
415 | ||
d1c5ea33 MD |
416 | #define SMC_IO_SHIFT (lp->io_shift) |
417 | ||
1da177e4 LT |
418 | #define SMC_inb(a, r) readb((a) + (r)) |
419 | #define SMC_inw(a, r) readw((a) + (r)) | |
420 | #define SMC_inl(a, r) readl((a) + (r)) | |
421 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
422 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
423 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
8a214c12 MD |
424 | #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) |
425 | #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) | |
1da177e4 LT |
426 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) |
427 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) | |
428 | ||
429 | #define RPC_LSA_DEFAULT RPC_LED_100_10 | |
430 | #define RPC_LSB_DEFAULT RPC_LED_TX_RX | |
431 | ||
432 | #endif | |
433 | ||
073ac8fd RK |
434 | |
435 | /* store this information for the driver.. */ | |
436 | struct smc_local { | |
437 | /* | |
438 | * If I have to wait until memory is available to send a | |
439 | * packet, I will store the skbuff here, until I get the | |
440 | * desired memory. Then, I'll send it out and free it. | |
441 | */ | |
442 | struct sk_buff *pending_tx_skb; | |
443 | struct tasklet_struct tx_task; | |
444 | ||
445 | /* version/revision of the SMC91x chip */ | |
446 | int version; | |
447 | ||
448 | /* Contains the current active transmission mode */ | |
449 | int tcr_cur_mode; | |
450 | ||
451 | /* Contains the current active receive mode */ | |
452 | int rcr_cur_mode; | |
453 | ||
454 | /* Contains the current active receive/phy mode */ | |
455 | int rpc_cur_mode; | |
456 | int ctl_rfduplx; | |
457 | int ctl_rspeed; | |
458 | ||
459 | u32 msg_enable; | |
460 | u32 phy_type; | |
461 | struct mii_if_info mii; | |
462 | ||
463 | /* work queue */ | |
464 | struct work_struct phy_configure; | |
465 | struct net_device *dev; | |
466 | int work_pending; | |
467 | ||
468 | spinlock_t lock; | |
469 | ||
52256c0e | 470 | #ifdef CONFIG_ARCH_PXA |
073ac8fd RK |
471 | /* DMA needs the physical address of the chip */ |
472 | u_long physaddr; | |
473 | struct device *device; | |
474 | #endif | |
475 | void __iomem *base; | |
476 | void __iomem *datacs; | |
3e947943 | 477 | |
15919886 EM |
478 | /* the low address lines on some platforms aren't connected... */ |
479 | int io_shift; | |
480 | ||
3e947943 | 481 | struct smc91x_platdata cfg; |
073ac8fd RK |
482 | }; |
483 | ||
fa6d3be0 EM |
484 | #define SMC_8BIT(p) ((p)->cfg.flags & SMC91X_USE_8BIT) |
485 | #define SMC_16BIT(p) ((p)->cfg.flags & SMC91X_USE_16BIT) | |
486 | #define SMC_32BIT(p) ((p)->cfg.flags & SMC91X_USE_32BIT) | |
073ac8fd | 487 | |
52256c0e | 488 | #ifdef CONFIG_ARCH_PXA |
1da177e4 LT |
489 | /* |
490 | * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is | |
491 | * always happening in irq context so no need to worry about races. TX is | |
492 | * different and probably not worth it for that reason, and not as critical | |
493 | * as RX which can overrun memory and lose packets. | |
494 | */ | |
495 | #include <linux/dma-mapping.h> | |
dcea83ad | 496 | #include <mach/dma.h> |
1da177e4 LT |
497 | |
498 | #ifdef SMC_insl | |
499 | #undef SMC_insl | |
500 | #define SMC_insl(a, r, p, l) \ | |
073ac8fd | 501 | smc_pxa_dma_insl(a, lp, r, dev->dma, p, l) |
1da177e4 | 502 | static inline void |
073ac8fd | 503 | smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma, |
1da177e4 LT |
504 | u_char *buf, int len) |
505 | { | |
073ac8fd | 506 | u_long physaddr = lp->physaddr; |
1da177e4 LT |
507 | dma_addr_t dmabuf; |
508 | ||
509 | /* fallback if no DMA available */ | |
510 | if (dma == (unsigned char)-1) { | |
511 | readsl(ioaddr + reg, buf, len); | |
512 | return; | |
513 | } | |
514 | ||
515 | /* 64 bit alignment is required for memory to memory DMA */ | |
516 | if ((long)buf & 4) { | |
517 | *((u32 *)buf) = SMC_inl(ioaddr, reg); | |
518 | buf += 4; | |
519 | len--; | |
520 | } | |
521 | ||
522 | len *= 4; | |
073ac8fd | 523 | dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE); |
1da177e4 LT |
524 | DCSR(dma) = DCSR_NODESC; |
525 | DTADR(dma) = dmabuf; | |
526 | DSADR(dma) = physaddr + reg; | |
527 | DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 | | |
528 | DCMD_WIDTH4 | (DCMD_LENGTH & len)); | |
529 | DCSR(dma) = DCSR_NODESC | DCSR_RUN; | |
530 | while (!(DCSR(dma) & DCSR_STOPSTATE)) | |
531 | cpu_relax(); | |
532 | DCSR(dma) = 0; | |
073ac8fd | 533 | dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE); |
1da177e4 LT |
534 | } |
535 | #endif | |
536 | ||
537 | #ifdef SMC_insw | |
538 | #undef SMC_insw | |
539 | #define SMC_insw(a, r, p, l) \ | |
073ac8fd | 540 | smc_pxa_dma_insw(a, lp, r, dev->dma, p, l) |
1da177e4 | 541 | static inline void |
073ac8fd | 542 | smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma, |
1da177e4 LT |
543 | u_char *buf, int len) |
544 | { | |
073ac8fd | 545 | u_long physaddr = lp->physaddr; |
1da177e4 LT |
546 | dma_addr_t dmabuf; |
547 | ||
548 | /* fallback if no DMA available */ | |
549 | if (dma == (unsigned char)-1) { | |
550 | readsw(ioaddr + reg, buf, len); | |
551 | return; | |
552 | } | |
553 | ||
554 | /* 64 bit alignment is required for memory to memory DMA */ | |
555 | while ((long)buf & 6) { | |
556 | *((u16 *)buf) = SMC_inw(ioaddr, reg); | |
557 | buf += 2; | |
558 | len--; | |
559 | } | |
560 | ||
561 | len *= 2; | |
073ac8fd | 562 | dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE); |
1da177e4 LT |
563 | DCSR(dma) = DCSR_NODESC; |
564 | DTADR(dma) = dmabuf; | |
565 | DSADR(dma) = physaddr + reg; | |
566 | DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 | | |
567 | DCMD_WIDTH2 | (DCMD_LENGTH & len)); | |
568 | DCSR(dma) = DCSR_NODESC | DCSR_RUN; | |
569 | while (!(DCSR(dma) & DCSR_STOPSTATE)) | |
570 | cpu_relax(); | |
571 | DCSR(dma) = 0; | |
073ac8fd | 572 | dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE); |
1da177e4 LT |
573 | } |
574 | #endif | |
575 | ||
576 | static void | |
7d12e780 | 577 | smc_pxa_dma_irq(int dma, void *dummy) |
1da177e4 LT |
578 | { |
579 | DCSR(dma) = 0; | |
580 | } | |
52256c0e | 581 | #endif /* CONFIG_ARCH_PXA */ |
1da177e4 LT |
582 | |
583 | ||
09779c6d NP |
584 | /* |
585 | * Everything a particular hardware setup needs should have been defined | |
586 | * at this point. Add stubs for the undefined cases, mainly to avoid | |
587 | * compilation warnings since they'll be optimized away, or to prevent buggy | |
588 | * use of them. | |
589 | */ | |
590 | ||
591 | #if ! SMC_CAN_USE_32BIT | |
592 | #define SMC_inl(ioaddr, reg) ({ BUG(); 0; }) | |
593 | #define SMC_outl(x, ioaddr, reg) BUG() | |
594 | #define SMC_insl(a, r, p, l) BUG() | |
595 | #define SMC_outsl(a, r, p, l) BUG() | |
596 | #endif | |
597 | ||
598 | #if !defined(SMC_insl) || !defined(SMC_outsl) | |
599 | #define SMC_insl(a, r, p, l) BUG() | |
600 | #define SMC_outsl(a, r, p, l) BUG() | |
601 | #endif | |
602 | ||
603 | #if ! SMC_CAN_USE_16BIT | |
604 | ||
605 | /* | |
606 | * Any 16-bit access is performed with two 8-bit accesses if the hardware | |
607 | * can't do it directly. Most registers are 16-bit so those are mandatory. | |
608 | */ | |
609 | #define SMC_outw(x, ioaddr, reg) \ | |
610 | do { \ | |
611 | unsigned int __val16 = (x); \ | |
612 | SMC_outb( __val16, ioaddr, reg ); \ | |
613 | SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\ | |
614 | } while (0) | |
615 | #define SMC_inw(ioaddr, reg) \ | |
616 | ({ \ | |
617 | unsigned int __val16; \ | |
618 | __val16 = SMC_inb( ioaddr, reg ); \ | |
619 | __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \ | |
620 | __val16; \ | |
621 | }) | |
622 | ||
623 | #define SMC_insw(a, r, p, l) BUG() | |
624 | #define SMC_outsw(a, r, p, l) BUG() | |
625 | ||
626 | #endif | |
627 | ||
628 | #if !defined(SMC_insw) || !defined(SMC_outsw) | |
629 | #define SMC_insw(a, r, p, l) BUG() | |
630 | #define SMC_outsw(a, r, p, l) BUG() | |
631 | #endif | |
632 | ||
633 | #if ! SMC_CAN_USE_8BIT | |
634 | #define SMC_inb(ioaddr, reg) ({ BUG(); 0; }) | |
635 | #define SMC_outb(x, ioaddr, reg) BUG() | |
636 | #define SMC_insb(a, r, p, l) BUG() | |
637 | #define SMC_outsb(a, r, p, l) BUG() | |
638 | #endif | |
639 | ||
640 | #if !defined(SMC_insb) || !defined(SMC_outsb) | |
641 | #define SMC_insb(a, r, p, l) BUG() | |
642 | #define SMC_outsb(a, r, p, l) BUG() | |
643 | #endif | |
644 | ||
645 | #ifndef SMC_CAN_USE_DATACS | |
646 | #define SMC_CAN_USE_DATACS 0 | |
647 | #endif | |
648 | ||
1da177e4 LT |
649 | #ifndef SMC_IO_SHIFT |
650 | #define SMC_IO_SHIFT 0 | |
651 | #endif | |
09779c6d NP |
652 | |
653 | #ifndef SMC_IRQ_FLAGS | |
1fb9df5d | 654 | #define SMC_IRQ_FLAGS IRQF_TRIGGER_RISING |
09779c6d NP |
655 | #endif |
656 | ||
657 | #ifndef SMC_INTERRUPT_PREAMBLE | |
658 | #define SMC_INTERRUPT_PREAMBLE | |
659 | #endif | |
660 | ||
661 | ||
662 | /* Because of bank switching, the LAN91x uses only 16 I/O ports */ | |
1da177e4 LT |
663 | #define SMC_IO_EXTENT (16 << SMC_IO_SHIFT) |
664 | #define SMC_DATA_EXTENT (4) | |
665 | ||
666 | /* | |
667 | . Bank Select Register: | |
668 | . | |
669 | . yyyy yyyy 0000 00xx | |
670 | . xx = bank number | |
671 | . yyyy yyyy = 0x33, for identification purposes. | |
672 | */ | |
673 | #define BANK_SELECT (14 << SMC_IO_SHIFT) | |
674 | ||
675 | ||
676 | // Transmit Control Register | |
677 | /* BANK 0 */ | |
cfdfa865 | 678 | #define TCR_REG(lp) SMC_REG(lp, 0x0000, 0) |
1da177e4 LT |
679 | #define TCR_ENABLE 0x0001 // When 1 we can transmit |
680 | #define TCR_LOOP 0x0002 // Controls output pin LBK | |
681 | #define TCR_FORCOL 0x0004 // When 1 will force a collision | |
682 | #define TCR_PAD_EN 0x0080 // When 1 will pad tx frames < 64 bytes w/0 | |
683 | #define TCR_NOCRC 0x0100 // When 1 will not append CRC to tx frames | |
684 | #define TCR_MON_CSN 0x0400 // When 1 tx monitors carrier | |
685 | #define TCR_FDUPLX 0x0800 // When 1 enables full duplex operation | |
686 | #define TCR_STP_SQET 0x1000 // When 1 stops tx if Signal Quality Error | |
687 | #define TCR_EPH_LOOP 0x2000 // When 1 enables EPH block loopback | |
688 | #define TCR_SWFDUP 0x8000 // When 1 enables Switched Full Duplex mode | |
689 | ||
690 | #define TCR_CLEAR 0 /* do NOTHING */ | |
691 | /* the default settings for the TCR register : */ | |
692 | #define TCR_DEFAULT (TCR_ENABLE | TCR_PAD_EN) | |
693 | ||
694 | ||
695 | // EPH Status Register | |
696 | /* BANK 0 */ | |
cfdfa865 | 697 | #define EPH_STATUS_REG(lp) SMC_REG(lp, 0x0002, 0) |
1da177e4 LT |
698 | #define ES_TX_SUC 0x0001 // Last TX was successful |
699 | #define ES_SNGL_COL 0x0002 // Single collision detected for last tx | |
700 | #define ES_MUL_COL 0x0004 // Multiple collisions detected for last tx | |
701 | #define ES_LTX_MULT 0x0008 // Last tx was a multicast | |
702 | #define ES_16COL 0x0010 // 16 Collisions Reached | |
703 | #define ES_SQET 0x0020 // Signal Quality Error Test | |
704 | #define ES_LTXBRD 0x0040 // Last tx was a broadcast | |
705 | #define ES_TXDEFR 0x0080 // Transmit Deferred | |
706 | #define ES_LATCOL 0x0200 // Late collision detected on last tx | |
707 | #define ES_LOSTCARR 0x0400 // Lost Carrier Sense | |
708 | #define ES_EXC_DEF 0x0800 // Excessive Deferral | |
709 | #define ES_CTR_ROL 0x1000 // Counter Roll Over indication | |
710 | #define ES_LINK_OK 0x4000 // Driven by inverted value of nLNK pin | |
711 | #define ES_TXUNRN 0x8000 // Tx Underrun | |
712 | ||
713 | ||
714 | // Receive Control Register | |
715 | /* BANK 0 */ | |
cfdfa865 | 716 | #define RCR_REG(lp) SMC_REG(lp, 0x0004, 0) |
1da177e4 LT |
717 | #define RCR_RX_ABORT 0x0001 // Set if a rx frame was aborted |
718 | #define RCR_PRMS 0x0002 // Enable promiscuous mode | |
719 | #define RCR_ALMUL 0x0004 // When set accepts all multicast frames | |
720 | #define RCR_RXEN 0x0100 // IFF this is set, we can receive packets | |
721 | #define RCR_STRIP_CRC 0x0200 // When set strips CRC from rx packets | |
722 | #define RCR_ABORT_ENB 0x0200 // When set will abort rx on collision | |
723 | #define RCR_FILT_CAR 0x0400 // When set filters leading 12 bit s of carrier | |
724 | #define RCR_SOFTRST 0x8000 // resets the chip | |
725 | ||
726 | /* the normal settings for the RCR register : */ | |
727 | #define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN) | |
728 | #define RCR_CLEAR 0x0 // set it to a base state | |
729 | ||
730 | ||
731 | // Counter Register | |
732 | /* BANK 0 */ | |
cfdfa865 | 733 | #define COUNTER_REG(lp) SMC_REG(lp, 0x0006, 0) |
1da177e4 LT |
734 | |
735 | ||
736 | // Memory Information Register | |
737 | /* BANK 0 */ | |
cfdfa865 | 738 | #define MIR_REG(lp) SMC_REG(lp, 0x0008, 0) |
1da177e4 LT |
739 | |
740 | ||
741 | // Receive/Phy Control Register | |
742 | /* BANK 0 */ | |
cfdfa865 | 743 | #define RPC_REG(lp) SMC_REG(lp, 0x000A, 0) |
1da177e4 LT |
744 | #define RPC_SPEED 0x2000 // When 1 PHY is in 100Mbps mode. |
745 | #define RPC_DPLX 0x1000 // When 1 PHY is in Full-Duplex Mode | |
746 | #define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode | |
747 | #define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb | |
748 | #define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb | |
1da177e4 LT |
749 | |
750 | #ifndef RPC_LSA_DEFAULT | |
751 | #define RPC_LSA_DEFAULT RPC_LED_100 | |
752 | #endif | |
753 | #ifndef RPC_LSB_DEFAULT | |
754 | #define RPC_LSB_DEFAULT RPC_LED_FD | |
755 | #endif | |
756 | ||
b0dbcf51 | 757 | #define RPC_DEFAULT (RPC_ANEG | RPC_SPEED | RPC_DPLX) |
1da177e4 LT |
758 | |
759 | ||
760 | /* Bank 0 0x0C is reserved */ | |
761 | ||
762 | // Bank Select Register | |
763 | /* All Banks */ | |
764 | #define BSR_REG 0x000E | |
765 | ||
766 | ||
767 | // Configuration Reg | |
768 | /* BANK 1 */ | |
cfdfa865 | 769 | #define CONFIG_REG(lp) SMC_REG(lp, 0x0000, 1) |
1da177e4 LT |
770 | #define CONFIG_EXT_PHY 0x0200 // 1=external MII, 0=internal Phy |
771 | #define CONFIG_GPCNTRL 0x0400 // Inverse value drives pin nCNTRL | |
772 | #define CONFIG_NO_WAIT 0x1000 // When 1 no extra wait states on ISA bus | |
773 | #define CONFIG_EPH_POWER_EN 0x8000 // When 0 EPH is placed into low power mode. | |
774 | ||
775 | // Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low | |
776 | #define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN) | |
777 | ||
778 | ||
779 | // Base Address Register | |
780 | /* BANK 1 */ | |
cfdfa865 | 781 | #define BASE_REG(lp) SMC_REG(lp, 0x0002, 1) |
1da177e4 LT |
782 | |
783 | ||
784 | // Individual Address Registers | |
785 | /* BANK 1 */ | |
cfdfa865 MD |
786 | #define ADDR0_REG(lp) SMC_REG(lp, 0x0004, 1) |
787 | #define ADDR1_REG(lp) SMC_REG(lp, 0x0006, 1) | |
788 | #define ADDR2_REG(lp) SMC_REG(lp, 0x0008, 1) | |
1da177e4 LT |
789 | |
790 | ||
791 | // General Purpose Register | |
792 | /* BANK 1 */ | |
cfdfa865 | 793 | #define GP_REG(lp) SMC_REG(lp, 0x000A, 1) |
1da177e4 LT |
794 | |
795 | ||
796 | // Control Register | |
797 | /* BANK 1 */ | |
cfdfa865 | 798 | #define CTL_REG(lp) SMC_REG(lp, 0x000C, 1) |
1da177e4 LT |
799 | #define CTL_RCV_BAD 0x4000 // When 1 bad CRC packets are received |
800 | #define CTL_AUTO_RELEASE 0x0800 // When 1 tx pages are released automatically | |
801 | #define CTL_LE_ENABLE 0x0080 // When 1 enables Link Error interrupt | |
802 | #define CTL_CR_ENABLE 0x0040 // When 1 enables Counter Rollover interrupt | |
803 | #define CTL_TE_ENABLE 0x0020 // When 1 enables Transmit Error interrupt | |
804 | #define CTL_EEPROM_SELECT 0x0004 // Controls EEPROM reload & store | |
805 | #define CTL_RELOAD 0x0002 // When set reads EEPROM into registers | |
806 | #define CTL_STORE 0x0001 // When set stores registers into EEPROM | |
807 | ||
808 | ||
809 | // MMU Command Register | |
810 | /* BANK 2 */ | |
cfdfa865 | 811 | #define MMU_CMD_REG(lp) SMC_REG(lp, 0x0000, 2) |
1da177e4 LT |
812 | #define MC_BUSY 1 // When 1 the last release has not completed |
813 | #define MC_NOP (0<<5) // No Op | |
814 | #define MC_ALLOC (1<<5) // OR with number of 256 byte packets | |
815 | #define MC_RESET (2<<5) // Reset MMU to initial state | |
816 | #define MC_REMOVE (3<<5) // Remove the current rx packet | |
817 | #define MC_RELEASE (4<<5) // Remove and release the current rx packet | |
818 | #define MC_FREEPKT (5<<5) // Release packet in PNR register | |
819 | #define MC_ENQUEUE (6<<5) // Enqueue the packet for transmit | |
820 | #define MC_RSTTXFIFO (7<<5) // Reset the TX FIFOs | |
821 | ||
822 | ||
823 | // Packet Number Register | |
824 | /* BANK 2 */ | |
cfdfa865 | 825 | #define PN_REG(lp) SMC_REG(lp, 0x0002, 2) |
1da177e4 LT |
826 | |
827 | ||
828 | // Allocation Result Register | |
829 | /* BANK 2 */ | |
cfdfa865 | 830 | #define AR_REG(lp) SMC_REG(lp, 0x0003, 2) |
1da177e4 LT |
831 | #define AR_FAILED 0x80 // Alocation Failed |
832 | ||
833 | ||
834 | // TX FIFO Ports Register | |
835 | /* BANK 2 */ | |
cfdfa865 | 836 | #define TXFIFO_REG(lp) SMC_REG(lp, 0x0004, 2) |
1da177e4 LT |
837 | #define TXFIFO_TEMPTY 0x80 // TX FIFO Empty |
838 | ||
839 | // RX FIFO Ports Register | |
840 | /* BANK 2 */ | |
cfdfa865 | 841 | #define RXFIFO_REG(lp) SMC_REG(lp, 0x0005, 2) |
1da177e4 LT |
842 | #define RXFIFO_REMPTY 0x80 // RX FIFO Empty |
843 | ||
cfdfa865 | 844 | #define FIFO_REG(lp) SMC_REG(lp, 0x0004, 2) |
1da177e4 LT |
845 | |
846 | // Pointer Register | |
847 | /* BANK 2 */ | |
cfdfa865 | 848 | #define PTR_REG(lp) SMC_REG(lp, 0x0006, 2) |
1da177e4 LT |
849 | #define PTR_RCV 0x8000 // 1=Receive area, 0=Transmit area |
850 | #define PTR_AUTOINC 0x4000 // Auto increment the pointer on each access | |
851 | #define PTR_READ 0x2000 // When 1 the operation is a read | |
852 | ||
853 | ||
854 | // Data Register | |
855 | /* BANK 2 */ | |
cfdfa865 | 856 | #define DATA_REG(lp) SMC_REG(lp, 0x0008, 2) |
1da177e4 LT |
857 | |
858 | ||
859 | // Interrupt Status/Acknowledge Register | |
860 | /* BANK 2 */ | |
cfdfa865 | 861 | #define INT_REG(lp) SMC_REG(lp, 0x000C, 2) |
1da177e4 LT |
862 | |
863 | ||
864 | // Interrupt Mask Register | |
865 | /* BANK 2 */ | |
cfdfa865 | 866 | #define IM_REG(lp) SMC_REG(lp, 0x000D, 2) |
1da177e4 LT |
867 | #define IM_MDINT 0x80 // PHY MI Register 18 Interrupt |
868 | #define IM_ERCV_INT 0x40 // Early Receive Interrupt | |
869 | #define IM_EPH_INT 0x20 // Set by Ethernet Protocol Handler section | |
870 | #define IM_RX_OVRN_INT 0x10 // Set by Receiver Overruns | |
871 | #define IM_ALLOC_INT 0x08 // Set when allocation request is completed | |
872 | #define IM_TX_EMPTY_INT 0x04 // Set if the TX FIFO goes empty | |
873 | #define IM_TX_INT 0x02 // Transmit Interrupt | |
874 | #define IM_RCV_INT 0x01 // Receive Interrupt | |
875 | ||
876 | ||
877 | // Multicast Table Registers | |
878 | /* BANK 3 */ | |
cfdfa865 MD |
879 | #define MCAST_REG1(lp) SMC_REG(lp, 0x0000, 3) |
880 | #define MCAST_REG2(lp) SMC_REG(lp, 0x0002, 3) | |
881 | #define MCAST_REG3(lp) SMC_REG(lp, 0x0004, 3) | |
882 | #define MCAST_REG4(lp) SMC_REG(lp, 0x0006, 3) | |
1da177e4 LT |
883 | |
884 | ||
885 | // Management Interface Register (MII) | |
886 | /* BANK 3 */ | |
cfdfa865 | 887 | #define MII_REG(lp) SMC_REG(lp, 0x0008, 3) |
1da177e4 LT |
888 | #define MII_MSK_CRS100 0x4000 // Disables CRS100 detection during tx half dup |
889 | #define MII_MDOE 0x0008 // MII Output Enable | |
890 | #define MII_MCLK 0x0004 // MII Clock, pin MDCLK | |
891 | #define MII_MDI 0x0002 // MII Input, pin MDI | |
892 | #define MII_MDO 0x0001 // MII Output, pin MDO | |
893 | ||
894 | ||
895 | // Revision Register | |
896 | /* BANK 3 */ | |
897 | /* ( hi: chip id low: rev # ) */ | |
cfdfa865 | 898 | #define REV_REG(lp) SMC_REG(lp, 0x000A, 3) |
1da177e4 LT |
899 | |
900 | ||
901 | // Early RCV Register | |
902 | /* BANK 3 */ | |
903 | /* this is NOT on SMC9192 */ | |
cfdfa865 | 904 | #define ERCV_REG(lp) SMC_REG(lp, 0x000C, 3) |
1da177e4 LT |
905 | #define ERCV_RCV_DISCRD 0x0080 // When 1 discards a packet being received |
906 | #define ERCV_THRESHOLD 0x001F // ERCV Threshold Mask | |
907 | ||
908 | ||
909 | // External Register | |
910 | /* BANK 7 */ | |
cfdfa865 | 911 | #define EXT_REG(lp) SMC_REG(lp, 0x0000, 7) |
1da177e4 LT |
912 | |
913 | ||
914 | #define CHIP_9192 3 | |
915 | #define CHIP_9194 4 | |
916 | #define CHIP_9195 5 | |
917 | #define CHIP_9196 6 | |
918 | #define CHIP_91100 7 | |
919 | #define CHIP_91100FD 8 | |
920 | #define CHIP_91111FD 9 | |
921 | ||
922 | static const char * chip_ids[ 16 ] = { | |
923 | NULL, NULL, NULL, | |
924 | /* 3 */ "SMC91C90/91C92", | |
925 | /* 4 */ "SMC91C94", | |
926 | /* 5 */ "SMC91C95", | |
927 | /* 6 */ "SMC91C96", | |
928 | /* 7 */ "SMC91C100", | |
929 | /* 8 */ "SMC91C100FD", | |
930 | /* 9 */ "SMC91C11xFD", | |
931 | NULL, NULL, NULL, | |
932 | NULL, NULL, NULL}; | |
933 | ||
934 | ||
1da177e4 LT |
935 | /* |
936 | . Receive status bits | |
937 | */ | |
938 | #define RS_ALGNERR 0x8000 | |
939 | #define RS_BRODCAST 0x4000 | |
940 | #define RS_BADCRC 0x2000 | |
941 | #define RS_ODDFRAME 0x1000 | |
942 | #define RS_TOOLONG 0x0800 | |
943 | #define RS_TOOSHORT 0x0400 | |
944 | #define RS_MULTICAST 0x0001 | |
945 | #define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT) | |
946 | ||
947 | ||
948 | /* | |
949 | * PHY IDs | |
950 | * LAN83C183 == LAN91C111 Internal PHY | |
951 | */ | |
952 | #define PHY_LAN83C183 0x0016f840 | |
953 | #define PHY_LAN83C180 0x02821c50 | |
954 | ||
955 | /* | |
956 | * PHY Register Addresses (LAN91C111 Internal PHY) | |
957 | * | |
958 | * Generic PHY registers can be found in <linux/mii.h> | |
959 | * | |
960 | * These phy registers are specific to our on-board phy. | |
961 | */ | |
962 | ||
963 | // PHY Configuration Register 1 | |
964 | #define PHY_CFG1_REG 0x10 | |
965 | #define PHY_CFG1_LNKDIS 0x8000 // 1=Rx Link Detect Function disabled | |
966 | #define PHY_CFG1_XMTDIS 0x4000 // 1=TP Transmitter Disabled | |
967 | #define PHY_CFG1_XMTPDN 0x2000 // 1=TP Transmitter Powered Down | |
968 | #define PHY_CFG1_BYPSCR 0x0400 // 1=Bypass scrambler/descrambler | |
969 | #define PHY_CFG1_UNSCDS 0x0200 // 1=Unscramble Idle Reception Disable | |
970 | #define PHY_CFG1_EQLZR 0x0100 // 1=Rx Equalizer Disabled | |
971 | #define PHY_CFG1_CABLE 0x0080 // 1=STP(150ohm), 0=UTP(100ohm) | |
972 | #define PHY_CFG1_RLVL0 0x0040 // 1=Rx Squelch level reduced by 4.5db | |
973 | #define PHY_CFG1_TLVL_SHIFT 2 // Transmit Output Level Adjust | |
974 | #define PHY_CFG1_TLVL_MASK 0x003C | |
975 | #define PHY_CFG1_TRF_MASK 0x0003 // Transmitter Rise/Fall time | |
976 | ||
977 | ||
978 | // PHY Configuration Register 2 | |
979 | #define PHY_CFG2_REG 0x11 | |
980 | #define PHY_CFG2_APOLDIS 0x0020 // 1=Auto Polarity Correction disabled | |
981 | #define PHY_CFG2_JABDIS 0x0010 // 1=Jabber disabled | |
982 | #define PHY_CFG2_MREG 0x0008 // 1=Multiple register access (MII mgt) | |
983 | #define PHY_CFG2_INTMDIO 0x0004 // 1=Interrupt signaled with MDIO pulseo | |
984 | ||
985 | // PHY Status Output (and Interrupt status) Register | |
986 | #define PHY_INT_REG 0x12 // Status Output (Interrupt Status) | |
987 | #define PHY_INT_INT 0x8000 // 1=bits have changed since last read | |
988 | #define PHY_INT_LNKFAIL 0x4000 // 1=Link Not detected | |
989 | #define PHY_INT_LOSSSYNC 0x2000 // 1=Descrambler has lost sync | |
990 | #define PHY_INT_CWRD 0x1000 // 1=Invalid 4B5B code detected on rx | |
991 | #define PHY_INT_SSD 0x0800 // 1=No Start Of Stream detected on rx | |
992 | #define PHY_INT_ESD 0x0400 // 1=No End Of Stream detected on rx | |
993 | #define PHY_INT_RPOL 0x0200 // 1=Reverse Polarity detected | |
994 | #define PHY_INT_JAB 0x0100 // 1=Jabber detected | |
995 | #define PHY_INT_SPDDET 0x0080 // 1=100Base-TX mode, 0=10Base-T mode | |
996 | #define PHY_INT_DPLXDET 0x0040 // 1=Device in Full Duplex | |
997 | ||
998 | // PHY Interrupt/Status Mask Register | |
999 | #define PHY_MASK_REG 0x13 // Interrupt Mask | |
1000 | // Uses the same bit definitions as PHY_INT_REG | |
1001 | ||
1002 | ||
1003 | /* | |
1004 | * SMC91C96 ethernet config and status registers. | |
1005 | * These are in the "attribute" space. | |
1006 | */ | |
1007 | #define ECOR 0x8000 | |
1008 | #define ECOR_RESET 0x80 | |
1009 | #define ECOR_LEVEL_IRQ 0x40 | |
1010 | #define ECOR_WR_ATTRIB 0x04 | |
1011 | #define ECOR_ENABLE 0x01 | |
1012 | ||
1013 | #define ECSR 0x8002 | |
1014 | #define ECSR_IOIS8 0x20 | |
1015 | #define ECSR_PWRDWN 0x04 | |
1016 | #define ECSR_INT 0x02 | |
1017 | ||
1018 | #define ATTRIB_SIZE ((64*1024) << SMC_IO_SHIFT) | |
1019 | ||
1020 | ||
1021 | /* | |
1022 | * Macros to abstract register access according to the data bus | |
1023 | * capabilities. Please use those and not the in/out primitives. | |
1024 | * Note: the following macros do *not* select the bank -- this must | |
1025 | * be done separately as needed in the main code. The SMC_REG() macro | |
1026 | * only uses the bank argument for debugging purposes (when enabled). | |
09779c6d NP |
1027 | * |
1028 | * Note: despite inline functions being safer, everything leading to this | |
1029 | * should preferably be macros to let BUG() display the line number in | |
1030 | * the core source code since we're interested in the top call site | |
1031 | * not in any inline function location. | |
1da177e4 LT |
1032 | */ |
1033 | ||
1034 | #if SMC_DEBUG > 0 | |
cfdfa865 | 1035 | #define SMC_REG(lp, reg, bank) \ |
1da177e4 | 1036 | ({ \ |
cfdfa865 | 1037 | int __b = SMC_CURRENT_BANK(lp); \ |
1da177e4 LT |
1038 | if (unlikely((__b & ~0xf0) != (0x3300 | bank))) { \ |
1039 | printk( "%s: bank reg screwed (0x%04x)\n", \ | |
1040 | CARDNAME, __b ); \ | |
1041 | BUG(); \ | |
1042 | } \ | |
1043 | reg<<SMC_IO_SHIFT; \ | |
1044 | }) | |
1045 | #else | |
cfdfa865 | 1046 | #define SMC_REG(lp, reg, bank) (reg<<SMC_IO_SHIFT) |
1da177e4 LT |
1047 | #endif |
1048 | ||
09779c6d NP |
1049 | /* |
1050 | * Hack Alert: Some setups just can't write 8 or 16 bits reliably when not | |
1051 | * aligned to a 32 bit boundary. I tell you that does exist! | |
1052 | * Fortunately the affected register accesses can be easily worked around | |
1053 | * since we can write zeroes to the preceeding 16 bits without adverse | |
1054 | * effects and use a 32-bit access. | |
1055 | * | |
1056 | * Enforce it on any 32-bit capable setup for now. | |
1057 | */ | |
3e947943 | 1058 | #define SMC_MUST_ALIGN_WRITE(lp) SMC_32BIT(lp) |
09779c6d | 1059 | |
cfdfa865 | 1060 | #define SMC_GET_PN(lp) \ |
3e947943 | 1061 | (SMC_8BIT(lp) ? (SMC_inb(ioaddr, PN_REG(lp))) \ |
cfdfa865 | 1062 | : (SMC_inw(ioaddr, PN_REG(lp)) & 0xFF)) |
09779c6d | 1063 | |
cfdfa865 | 1064 | #define SMC_SET_PN(lp, x) \ |
09779c6d | 1065 | do { \ |
3e947943 | 1066 | if (SMC_MUST_ALIGN_WRITE(lp)) \ |
cfdfa865 | 1067 | SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 0, 2)); \ |
3e947943 | 1068 | else if (SMC_8BIT(lp)) \ |
cfdfa865 | 1069 | SMC_outb(x, ioaddr, PN_REG(lp)); \ |
09779c6d | 1070 | else \ |
cfdfa865 | 1071 | SMC_outw(x, ioaddr, PN_REG(lp)); \ |
09779c6d NP |
1072 | } while (0) |
1073 | ||
cfdfa865 | 1074 | #define SMC_GET_AR(lp) \ |
3e947943 | 1075 | (SMC_8BIT(lp) ? (SMC_inb(ioaddr, AR_REG(lp))) \ |
cfdfa865 | 1076 | : (SMC_inw(ioaddr, PN_REG(lp)) >> 8)) |
09779c6d | 1077 | |
cfdfa865 | 1078 | #define SMC_GET_TXFIFO(lp) \ |
3e947943 | 1079 | (SMC_8BIT(lp) ? (SMC_inb(ioaddr, TXFIFO_REG(lp))) \ |
cfdfa865 | 1080 | : (SMC_inw(ioaddr, TXFIFO_REG(lp)) & 0xFF)) |
09779c6d | 1081 | |
cfdfa865 | 1082 | #define SMC_GET_RXFIFO(lp) \ |
3e947943 | 1083 | (SMC_8BIT(lp) ? (SMC_inb(ioaddr, RXFIFO_REG(lp))) \ |
cfdfa865 | 1084 | : (SMC_inw(ioaddr, TXFIFO_REG(lp)) >> 8)) |
09779c6d | 1085 | |
cfdfa865 | 1086 | #define SMC_GET_INT(lp) \ |
3e947943 | 1087 | (SMC_8BIT(lp) ? (SMC_inb(ioaddr, INT_REG(lp))) \ |
cfdfa865 | 1088 | : (SMC_inw(ioaddr, INT_REG(lp)) & 0xFF)) |
09779c6d | 1089 | |
cfdfa865 | 1090 | #define SMC_ACK_INT(lp, x) \ |
1da177e4 | 1091 | do { \ |
3e947943 | 1092 | if (SMC_8BIT(lp)) \ |
cfdfa865 | 1093 | SMC_outb(x, ioaddr, INT_REG(lp)); \ |
09779c6d NP |
1094 | else { \ |
1095 | unsigned long __flags; \ | |
1096 | int __mask; \ | |
1097 | local_irq_save(__flags); \ | |
cfdfa865 MD |
1098 | __mask = SMC_inw(ioaddr, INT_REG(lp)) & ~0xff; \ |
1099 | SMC_outw(__mask | (x), ioaddr, INT_REG(lp)); \ | |
09779c6d NP |
1100 | local_irq_restore(__flags); \ |
1101 | } \ | |
1102 | } while (0) | |
1103 | ||
cfdfa865 | 1104 | #define SMC_GET_INT_MASK(lp) \ |
3e947943 | 1105 | (SMC_8BIT(lp) ? (SMC_inb(ioaddr, IM_REG(lp))) \ |
cfdfa865 | 1106 | : (SMC_inw(ioaddr, INT_REG(lp)) >> 8)) |
09779c6d | 1107 | |
cfdfa865 | 1108 | #define SMC_SET_INT_MASK(lp, x) \ |
09779c6d | 1109 | do { \ |
3e947943 | 1110 | if (SMC_8BIT(lp)) \ |
cfdfa865 | 1111 | SMC_outb(x, ioaddr, IM_REG(lp)); \ |
09779c6d | 1112 | else \ |
cfdfa865 | 1113 | SMC_outw((x) << 8, ioaddr, INT_REG(lp)); \ |
09779c6d NP |
1114 | } while (0) |
1115 | ||
cfdfa865 | 1116 | #define SMC_CURRENT_BANK(lp) SMC_inw(ioaddr, BANK_SELECT) |
09779c6d | 1117 | |
cfdfa865 | 1118 | #define SMC_SELECT_BANK(lp, x) \ |
09779c6d | 1119 | do { \ |
3e947943 | 1120 | if (SMC_MUST_ALIGN_WRITE(lp)) \ |
09779c6d NP |
1121 | SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT); \ |
1122 | else \ | |
1123 | SMC_outw(x, ioaddr, BANK_SELECT); \ | |
1124 | } while (0) | |
1125 | ||
cfdfa865 | 1126 | #define SMC_GET_BASE(lp) SMC_inw(ioaddr, BASE_REG(lp)) |
09779c6d | 1127 | |
cfdfa865 | 1128 | #define SMC_SET_BASE(lp, x) SMC_outw(x, ioaddr, BASE_REG(lp)) |
09779c6d | 1129 | |
cfdfa865 | 1130 | #define SMC_GET_CONFIG(lp) SMC_inw(ioaddr, CONFIG_REG(lp)) |
09779c6d | 1131 | |
cfdfa865 | 1132 | #define SMC_SET_CONFIG(lp, x) SMC_outw(x, ioaddr, CONFIG_REG(lp)) |
09779c6d | 1133 | |
cfdfa865 | 1134 | #define SMC_GET_COUNTER(lp) SMC_inw(ioaddr, COUNTER_REG(lp)) |
09779c6d | 1135 | |
cfdfa865 | 1136 | #define SMC_GET_CTL(lp) SMC_inw(ioaddr, CTL_REG(lp)) |
09779c6d | 1137 | |
cfdfa865 | 1138 | #define SMC_SET_CTL(lp, x) SMC_outw(x, ioaddr, CTL_REG(lp)) |
09779c6d | 1139 | |
cfdfa865 | 1140 | #define SMC_GET_MII(lp) SMC_inw(ioaddr, MII_REG(lp)) |
09779c6d | 1141 | |
cfdfa865 | 1142 | #define SMC_SET_MII(lp, x) SMC_outw(x, ioaddr, MII_REG(lp)) |
09779c6d | 1143 | |
cfdfa865 | 1144 | #define SMC_GET_MIR(lp) SMC_inw(ioaddr, MIR_REG(lp)) |
09779c6d | 1145 | |
cfdfa865 | 1146 | #define SMC_SET_MIR(lp, x) SMC_outw(x, ioaddr, MIR_REG(lp)) |
09779c6d | 1147 | |
cfdfa865 | 1148 | #define SMC_GET_MMU_CMD(lp) SMC_inw(ioaddr, MMU_CMD_REG(lp)) |
09779c6d | 1149 | |
cfdfa865 | 1150 | #define SMC_SET_MMU_CMD(lp, x) SMC_outw(x, ioaddr, MMU_CMD_REG(lp)) |
09779c6d | 1151 | |
cfdfa865 | 1152 | #define SMC_GET_FIFO(lp) SMC_inw(ioaddr, FIFO_REG(lp)) |
09779c6d | 1153 | |
cfdfa865 | 1154 | #define SMC_GET_PTR(lp) SMC_inw(ioaddr, PTR_REG(lp)) |
09779c6d | 1155 | |
cfdfa865 | 1156 | #define SMC_SET_PTR(lp, x) \ |
09779c6d | 1157 | do { \ |
3e947943 | 1158 | if (SMC_MUST_ALIGN_WRITE(lp)) \ |
cfdfa865 | 1159 | SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 4, 2)); \ |
09779c6d | 1160 | else \ |
cfdfa865 | 1161 | SMC_outw(x, ioaddr, PTR_REG(lp)); \ |
1da177e4 | 1162 | } while (0) |
1da177e4 | 1163 | |
cfdfa865 | 1164 | #define SMC_GET_EPH_STATUS(lp) SMC_inw(ioaddr, EPH_STATUS_REG(lp)) |
09779c6d | 1165 | |
cfdfa865 | 1166 | #define SMC_GET_RCR(lp) SMC_inw(ioaddr, RCR_REG(lp)) |
09779c6d | 1167 | |
cfdfa865 | 1168 | #define SMC_SET_RCR(lp, x) SMC_outw(x, ioaddr, RCR_REG(lp)) |
09779c6d | 1169 | |
cfdfa865 | 1170 | #define SMC_GET_REV(lp) SMC_inw(ioaddr, REV_REG(lp)) |
09779c6d | 1171 | |
cfdfa865 | 1172 | #define SMC_GET_RPC(lp) SMC_inw(ioaddr, RPC_REG(lp)) |
09779c6d | 1173 | |
cfdfa865 | 1174 | #define SMC_SET_RPC(lp, x) \ |
09779c6d | 1175 | do { \ |
3e947943 | 1176 | if (SMC_MUST_ALIGN_WRITE(lp)) \ |
cfdfa865 | 1177 | SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 8, 0)); \ |
09779c6d | 1178 | else \ |
cfdfa865 | 1179 | SMC_outw(x, ioaddr, RPC_REG(lp)); \ |
09779c6d NP |
1180 | } while (0) |
1181 | ||
cfdfa865 | 1182 | #define SMC_GET_TCR(lp) SMC_inw(ioaddr, TCR_REG(lp)) |
09779c6d | 1183 | |
cfdfa865 | 1184 | #define SMC_SET_TCR(lp, x) SMC_outw(x, ioaddr, TCR_REG(lp)) |
1da177e4 LT |
1185 | |
1186 | #ifndef SMC_GET_MAC_ADDR | |
cfdfa865 | 1187 | #define SMC_GET_MAC_ADDR(lp, addr) \ |
1da177e4 LT |
1188 | do { \ |
1189 | unsigned int __v; \ | |
cfdfa865 | 1190 | __v = SMC_inw(ioaddr, ADDR0_REG(lp)); \ |
1da177e4 | 1191 | addr[0] = __v; addr[1] = __v >> 8; \ |
cfdfa865 | 1192 | __v = SMC_inw(ioaddr, ADDR1_REG(lp)); \ |
1da177e4 | 1193 | addr[2] = __v; addr[3] = __v >> 8; \ |
cfdfa865 | 1194 | __v = SMC_inw(ioaddr, ADDR2_REG(lp)); \ |
1da177e4 LT |
1195 | addr[4] = __v; addr[5] = __v >> 8; \ |
1196 | } while (0) | |
1197 | #endif | |
1198 | ||
cfdfa865 | 1199 | #define SMC_SET_MAC_ADDR(lp, addr) \ |
1da177e4 | 1200 | do { \ |
cfdfa865 MD |
1201 | SMC_outw(addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG(lp)); \ |
1202 | SMC_outw(addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG(lp)); \ | |
1203 | SMC_outw(addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG(lp)); \ | |
1da177e4 LT |
1204 | } while (0) |
1205 | ||
cfdfa865 | 1206 | #define SMC_SET_MCAST(lp, x) \ |
1da177e4 LT |
1207 | do { \ |
1208 | const unsigned char *mt = (x); \ | |
cfdfa865 MD |
1209 | SMC_outw(mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1(lp)); \ |
1210 | SMC_outw(mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2(lp)); \ | |
1211 | SMC_outw(mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3(lp)); \ | |
1212 | SMC_outw(mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4(lp)); \ | |
1da177e4 LT |
1213 | } while (0) |
1214 | ||
cfdfa865 | 1215 | #define SMC_PUT_PKT_HDR(lp, status, length) \ |
1da177e4 | 1216 | do { \ |
3e947943 | 1217 | if (SMC_32BIT(lp)) \ |
cfdfa865 MD |
1218 | SMC_outl((status) | (length)<<16, ioaddr, \ |
1219 | DATA_REG(lp)); \ | |
09779c6d | 1220 | else { \ |
cfdfa865 MD |
1221 | SMC_outw(status, ioaddr, DATA_REG(lp)); \ |
1222 | SMC_outw(length, ioaddr, DATA_REG(lp)); \ | |
09779c6d | 1223 | } \ |
1da177e4 | 1224 | } while (0) |
1da177e4 | 1225 | |
cfdfa865 | 1226 | #define SMC_GET_PKT_HDR(lp, status, length) \ |
1da177e4 | 1227 | do { \ |
3e947943 | 1228 | if (SMC_32BIT(lp)) { \ |
cfdfa865 | 1229 | unsigned int __val = SMC_inl(ioaddr, DATA_REG(lp)); \ |
09779c6d NP |
1230 | (status) = __val & 0xffff; \ |
1231 | (length) = __val >> 16; \ | |
1232 | } else { \ | |
cfdfa865 MD |
1233 | (status) = SMC_inw(ioaddr, DATA_REG(lp)); \ |
1234 | (length) = SMC_inw(ioaddr, DATA_REG(lp)); \ | |
1da177e4 LT |
1235 | } \ |
1236 | } while (0) | |
1da177e4 | 1237 | |
cfdfa865 | 1238 | #define SMC_PUSH_DATA(lp, p, l) \ |
1da177e4 | 1239 | do { \ |
3e947943 | 1240 | if (SMC_32BIT(lp)) { \ |
09779c6d NP |
1241 | void *__ptr = (p); \ |
1242 | int __len = (l); \ | |
fbd81976 | 1243 | void __iomem *__ioaddr = ioaddr; \ |
09779c6d NP |
1244 | if (__len >= 2 && (unsigned long)__ptr & 2) { \ |
1245 | __len -= 2; \ | |
cfdfa865 MD |
1246 | SMC_outw(*(u16 *)__ptr, ioaddr, \ |
1247 | DATA_REG(lp)); \ | |
09779c6d NP |
1248 | __ptr += 2; \ |
1249 | } \ | |
1250 | if (SMC_CAN_USE_DATACS && lp->datacs) \ | |
1251 | __ioaddr = lp->datacs; \ | |
cfdfa865 | 1252 | SMC_outsl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \ |
09779c6d NP |
1253 | if (__len & 2) { \ |
1254 | __ptr += (__len & ~3); \ | |
cfdfa865 MD |
1255 | SMC_outw(*((u16 *)__ptr), ioaddr, \ |
1256 | DATA_REG(lp)); \ | |
09779c6d | 1257 | } \ |
3e947943 | 1258 | } else if (SMC_16BIT(lp)) \ |
cfdfa865 | 1259 | SMC_outsw(ioaddr, DATA_REG(lp), p, (l) >> 1); \ |
3e947943 | 1260 | else if (SMC_8BIT(lp)) \ |
cfdfa865 | 1261 | SMC_outsb(ioaddr, DATA_REG(lp), p, l); \ |
1da177e4 | 1262 | } while (0) |
1da177e4 | 1263 | |
cfdfa865 | 1264 | #define SMC_PULL_DATA(lp, p, l) \ |
09779c6d | 1265 | do { \ |
3e947943 | 1266 | if (SMC_32BIT(lp)) { \ |
09779c6d NP |
1267 | void *__ptr = (p); \ |
1268 | int __len = (l); \ | |
fbd81976 | 1269 | void __iomem *__ioaddr = ioaddr; \ |
09779c6d NP |
1270 | if ((unsigned long)__ptr & 2) { \ |
1271 | /* \ | |
1272 | * We want 32bit alignment here. \ | |
1273 | * Since some buses perform a full \ | |
1274 | * 32bit fetch even for 16bit data \ | |
1275 | * we can't use SMC_inw() here. \ | |
1276 | * Back both source (on-chip) and \ | |
1277 | * destination pointers of 2 bytes. \ | |
1278 | * This is possible since the call to \ | |
1279 | * SMC_GET_PKT_HDR() already advanced \ | |
1280 | * the source pointer of 4 bytes, and \ | |
1281 | * the skb_reserve(skb, 2) advanced \ | |
1282 | * the destination pointer of 2 bytes. \ | |
1283 | */ \ | |
1284 | __ptr -= 2; \ | |
1285 | __len += 2; \ | |
cfdfa865 MD |
1286 | SMC_SET_PTR(lp, \ |
1287 | 2|PTR_READ|PTR_RCV|PTR_AUTOINC); \ | |
09779c6d NP |
1288 | } \ |
1289 | if (SMC_CAN_USE_DATACS && lp->datacs) \ | |
1290 | __ioaddr = lp->datacs; \ | |
1da177e4 | 1291 | __len += 2; \ |
cfdfa865 | 1292 | SMC_insl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \ |
3e947943 | 1293 | } else if (SMC_16BIT(lp)) \ |
cfdfa865 | 1294 | SMC_insw(ioaddr, DATA_REG(lp), p, (l) >> 1); \ |
3e947943 | 1295 | else if (SMC_8BIT(lp)) \ |
cfdfa865 | 1296 | SMC_insb(ioaddr, DATA_REG(lp), p, l); \ |
09779c6d | 1297 | } while (0) |
1da177e4 LT |
1298 | |
1299 | #endif /* _SMC91X_H_ */ |