Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*------------------------------------------------------------------------ |
2 | . smc91x.h - macros for SMSC's 91C9x/91C1xx single-chip Ethernet device. | |
3 | . | |
4 | . Copyright (C) 1996 by Erik Stahlman | |
5 | . Copyright (C) 2001 Standard Microsystems Corporation | |
6 | . Developed by Simple Network Magic Corporation | |
7 | . Copyright (C) 2003 Monta Vista Software, Inc. | |
8 | . Unified SMC91x driver by Nicolas Pitre | |
9 | . | |
10 | . This program is free software; you can redistribute it and/or modify | |
11 | . it under the terms of the GNU General Public License as published by | |
12 | . the Free Software Foundation; either version 2 of the License, or | |
13 | . (at your option) any later version. | |
14 | . | |
15 | . This program is distributed in the hope that it will be useful, | |
16 | . but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | . GNU General Public License for more details. | |
19 | . | |
20 | . You should have received a copy of the GNU General Public License | |
21 | . along with this program; if not, write to the Free Software | |
22 | . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
23 | . | |
24 | . Information contained in this file was obtained from the LAN91C111 | |
25 | . manual from SMC. To get a copy, if you really want one, you can find | |
26 | . information under www.smsc.com. | |
27 | . | |
28 | . Authors | |
29 | . Erik Stahlman <erik@vt.edu> | |
30 | . Daris A Nevil <dnevil@snmc.com> | |
31 | . Nicolas Pitre <nico@cam.org> | |
32 | . | |
33 | ---------------------------------------------------------------------------*/ | |
34 | #ifndef _SMC91X_H_ | |
35 | #define _SMC91X_H_ | |
36 | ||
37 | ||
38 | /* | |
39 | * Define your architecture specific bus configuration parameters here. | |
40 | */ | |
41 | ||
42 | #if defined(CONFIG_ARCH_LUBBOCK) | |
43 | ||
44 | /* We can only do 16-bit reads and writes in the static memory space. */ | |
45 | #define SMC_CAN_USE_8BIT 0 | |
46 | #define SMC_CAN_USE_16BIT 1 | |
47 | #define SMC_CAN_USE_32BIT 0 | |
48 | #define SMC_NOWAIT 1 | |
49 | ||
50 | /* The first two address lines aren't connected... */ | |
51 | #define SMC_IO_SHIFT 2 | |
52 | ||
53 | #define SMC_inw(a, r) readw((a) + (r)) | |
54 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
55 | #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) | |
56 | #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) | |
57 | ||
58 | #elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6) | |
59 | ||
60 | /* We can only do 16-bit reads and writes in the static memory space. */ | |
61 | #define SMC_CAN_USE_8BIT 0 | |
62 | #define SMC_CAN_USE_16BIT 1 | |
63 | #define SMC_CAN_USE_32BIT 0 | |
64 | #define SMC_NOWAIT 1 | |
65 | ||
66 | #define SMC_IO_SHIFT 0 | |
67 | ||
68 | #define SMC_inw(a, r) in_be16((volatile u16 *)((a) + (r))) | |
69 | #define SMC_outw(v, a, r) out_be16((volatile u16 *)((a) + (r)), v) | |
70 | #define SMC_insw(a, r, p, l) \ | |
71 | do { \ | |
72 | unsigned long __port = (a) + (r); \ | |
73 | u16 *__p = (u16 *)(p); \ | |
74 | int __l = (l); \ | |
75 | insw(__port, __p, __l); \ | |
76 | while (__l > 0) { \ | |
77 | *__p = swab16(*__p); \ | |
78 | __p++; \ | |
79 | __l--; \ | |
80 | } \ | |
81 | } while (0) | |
82 | #define SMC_outsw(a, r, p, l) \ | |
83 | do { \ | |
84 | unsigned long __port = (a) + (r); \ | |
85 | u16 *__p = (u16 *)(p); \ | |
86 | int __l = (l); \ | |
87 | while (__l > 0) { \ | |
88 | /* Believe it or not, the swab isn't needed. */ \ | |
89 | outw( /* swab16 */ (*__p++), __port); \ | |
90 | __l--; \ | |
91 | } \ | |
92 | } while (0) | |
9ded96f2 | 93 | #define SMC_IRQ_FLAGS (0) |
1da177e4 LT |
94 | |
95 | #elif defined(CONFIG_SA1100_PLEB) | |
96 | /* We can only do 16-bit reads and writes in the static memory space. */ | |
97 | #define SMC_CAN_USE_8BIT 1 | |
98 | #define SMC_CAN_USE_16BIT 1 | |
99 | #define SMC_CAN_USE_32BIT 0 | |
100 | #define SMC_IO_SHIFT 0 | |
101 | #define SMC_NOWAIT 1 | |
102 | ||
1cf99be5 RK |
103 | #define SMC_inb(a, r) readb((a) + (r)) |
104 | #define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) | |
105 | #define SMC_inw(a, r) readw((a) + (r)) | |
106 | #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) | |
107 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
108 | #define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) | |
109 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
110 | #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) | |
1da177e4 | 111 | |
9ded96f2 | 112 | #define SMC_IRQ_FLAGS (0) |
1da177e4 LT |
113 | |
114 | #elif defined(CONFIG_SA1100_ASSABET) | |
115 | ||
116 | #include <asm/arch/neponset.h> | |
117 | ||
118 | /* We can only do 8-bit reads and writes in the static memory space. */ | |
119 | #define SMC_CAN_USE_8BIT 1 | |
120 | #define SMC_CAN_USE_16BIT 0 | |
121 | #define SMC_CAN_USE_32BIT 0 | |
122 | #define SMC_NOWAIT 1 | |
123 | ||
124 | /* The first two address lines aren't connected... */ | |
125 | #define SMC_IO_SHIFT 2 | |
126 | ||
127 | #define SMC_inb(a, r) readb((a) + (r)) | |
128 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
129 | #define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) | |
130 | #define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) | |
131 | ||
b0348b90 LB |
132 | #elif defined(CONFIG_MACH_LOGICPD_PXA270) |
133 | ||
134 | #define SMC_CAN_USE_8BIT 0 | |
135 | #define SMC_CAN_USE_16BIT 1 | |
136 | #define SMC_CAN_USE_32BIT 0 | |
137 | #define SMC_IO_SHIFT 0 | |
138 | #define SMC_NOWAIT 1 | |
b0348b90 | 139 | |
b0348b90 | 140 | #define SMC_inw(a, r) readw((a) + (r)) |
b0348b90 | 141 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) |
b0348b90 LB |
142 | #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) |
143 | #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) | |
144 | ||
1da177e4 LT |
145 | #elif defined(CONFIG_ARCH_INNOKOM) || \ |
146 | defined(CONFIG_MACH_MAINSTONE) || \ | |
147 | defined(CONFIG_ARCH_PXA_IDP) || \ | |
148 | defined(CONFIG_ARCH_RAMSES) | |
149 | ||
150 | #define SMC_CAN_USE_8BIT 1 | |
151 | #define SMC_CAN_USE_16BIT 1 | |
152 | #define SMC_CAN_USE_32BIT 1 | |
153 | #define SMC_IO_SHIFT 0 | |
154 | #define SMC_NOWAIT 1 | |
155 | #define SMC_USE_PXA_DMA 1 | |
156 | ||
157 | #define SMC_inb(a, r) readb((a) + (r)) | |
158 | #define SMC_inw(a, r) readw((a) + (r)) | |
159 | #define SMC_inl(a, r) readl((a) + (r)) | |
160 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
161 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
162 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) | |
163 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) | |
164 | ||
165 | /* We actually can't write halfwords properly if not word aligned */ | |
166 | static inline void | |
eb1d6988 | 167 | SMC_outw(u16 val, void __iomem *ioaddr, int reg) |
1da177e4 LT |
168 | { |
169 | if (reg & 2) { | |
170 | unsigned int v = val << 16; | |
171 | v |= readl(ioaddr + (reg & ~2)) & 0xffff; | |
172 | writel(v, ioaddr + (reg & ~2)); | |
173 | } else { | |
174 | writew(val, ioaddr + reg); | |
175 | } | |
176 | } | |
177 | ||
178 | #elif defined(CONFIG_ARCH_OMAP) | |
179 | ||
180 | /* We can only do 16-bit reads and writes in the static memory space. */ | |
181 | #define SMC_CAN_USE_8BIT 0 | |
182 | #define SMC_CAN_USE_16BIT 1 | |
183 | #define SMC_CAN_USE_32BIT 0 | |
184 | #define SMC_IO_SHIFT 0 | |
185 | #define SMC_NOWAIT 1 | |
186 | ||
1da177e4 LT |
187 | #define SMC_inw(a, r) readw((a) + (r)) |
188 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
189 | #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) | |
190 | #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) | |
1da177e4 | 191 | |
5f13e7ec DB |
192 | #include <asm/mach-types.h> |
193 | #include <asm/arch/cpu.h> | |
194 | ||
9ded96f2 | 195 | #define SMC_IRQ_FLAGS (( \ |
5f13e7ec DB |
196 | machine_is_omap_h2() \ |
197 | || machine_is_omap_h3() \ | |
f1b7c5f4 | 198 | || machine_is_omap_h4() \ |
af44f5bf | 199 | || (machine_is_omap_innovator() && !cpu_is_omap1510()) \ |
1fb9df5d | 200 | ) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING) |
5f13e7ec DB |
201 | |
202 | ||
1da177e4 LT |
203 | #elif defined(CONFIG_SH_SH4202_MICRODEV) |
204 | ||
205 | #define SMC_CAN_USE_8BIT 0 | |
206 | #define SMC_CAN_USE_16BIT 1 | |
207 | #define SMC_CAN_USE_32BIT 0 | |
208 | ||
209 | #define SMC_inb(a, r) inb((a) + (r) - 0xa0000000) | |
210 | #define SMC_inw(a, r) inw((a) + (r) - 0xa0000000) | |
211 | #define SMC_inl(a, r) inl((a) + (r) - 0xa0000000) | |
212 | #define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000) | |
213 | #define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000) | |
214 | #define SMC_outl(v, a, r) outl(v, (a) + (r) - 0xa0000000) | |
215 | #define SMC_insl(a, r, p, l) insl((a) + (r) - 0xa0000000, p, l) | |
216 | #define SMC_outsl(a, r, p, l) outsl((a) + (r) - 0xa0000000, p, l) | |
217 | #define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l) | |
218 | #define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l) | |
219 | ||
9ded96f2 | 220 | #define SMC_IRQ_FLAGS (0) |
1da177e4 LT |
221 | |
222 | #elif defined(CONFIG_ISA) | |
223 | ||
224 | #define SMC_CAN_USE_8BIT 1 | |
225 | #define SMC_CAN_USE_16BIT 1 | |
226 | #define SMC_CAN_USE_32BIT 0 | |
227 | ||
228 | #define SMC_inb(a, r) inb((a) + (r)) | |
229 | #define SMC_inw(a, r) inw((a) + (r)) | |
230 | #define SMC_outb(v, a, r) outb(v, (a) + (r)) | |
231 | #define SMC_outw(v, a, r) outw(v, (a) + (r)) | |
232 | #define SMC_insw(a, r, p, l) insw((a) + (r), p, l) | |
233 | #define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) | |
234 | ||
235 | #elif defined(CONFIG_M32R) | |
236 | ||
237 | #define SMC_CAN_USE_8BIT 0 | |
238 | #define SMC_CAN_USE_16BIT 1 | |
239 | #define SMC_CAN_USE_32BIT 0 | |
240 | ||
f3ac9fbf HT |
241 | #define SMC_inb(a, r) inb((u32)a) + (r)) |
242 | #define SMC_inw(a, r) inw(((u32)a) + (r)) | |
243 | #define SMC_outb(v, a, r) outb(v, ((u32)a) + (r)) | |
244 | #define SMC_outw(v, a, r) outw(v, ((u32)a) + (r)) | |
245 | #define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l) | |
246 | #define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l) | |
1da177e4 | 247 | |
9ded96f2 | 248 | #define SMC_IRQ_FLAGS (0) |
1da177e4 LT |
249 | |
250 | #define RPC_LSA_DEFAULT RPC_LED_TX_RX | |
251 | #define RPC_LSB_DEFAULT RPC_LED_100_10 | |
252 | ||
d4adcffb MS |
253 | #elif defined(CONFIG_MACH_LPD79520) \ |
254 | || defined(CONFIG_MACH_LPD7A400) \ | |
255 | || defined(CONFIG_MACH_LPD7A404) | |
1da177e4 | 256 | |
d4adcffb MS |
257 | /* The LPD7X_IOBARRIER is necessary to overcome a mismatch between the |
258 | * way that the CPU handles chip selects and the way that the SMC chip | |
259 | * expects the chip select to operate. Refer to | |
1da177e4 | 260 | * Documentation/arm/Sharp-LH/IOBarrier for details. The read from |
d4adcffb MS |
261 | * IOBARRIER is a byte, in order that we read the least-common |
262 | * denominator. It would be wasteful to read 32 bits from an 8-bit | |
263 | * accessible region. | |
1da177e4 LT |
264 | * |
265 | * There is no explicit protection against interrupts intervening | |
266 | * between the writew and the IOBARRIER. In SMC ISR there is a | |
267 | * preamble that performs an IOBARRIER in the extremely unlikely event | |
268 | * that the driver interrupts itself between a writew to the chip an | |
269 | * the IOBARRIER that follows *and* the cache is large enough that the | |
270 | * first off-chip access while handing the interrupt is to the SMC | |
271 | * chip. Other devices in the same address space as the SMC chip must | |
272 | * be aware of the potential for trouble and perform a similar | |
273 | * IOBARRIER on entry to their ISR. | |
274 | */ | |
275 | ||
276 | #include <asm/arch/constants.h> /* IOBARRIER_VIRT */ | |
277 | ||
278 | #define SMC_CAN_USE_8BIT 0 | |
279 | #define SMC_CAN_USE_16BIT 1 | |
280 | #define SMC_CAN_USE_32BIT 0 | |
281 | #define SMC_NOWAIT 0 | |
d4adcffb | 282 | #define LPD7X_IOBARRIER readb (IOBARRIER_VIRT) |
1da177e4 | 283 | |
d4adcffb MS |
284 | #define SMC_inw(a,r)\ |
285 | ({ unsigned short v = readw ((void*) ((a) + (r))); LPD7X_IOBARRIER; v; }) | |
286 | #define SMC_outw(v,a,r) ({ writew ((v), (a) + (r)); LPD7X_IOBARRIER; }) | |
1da177e4 | 287 | |
d4adcffb MS |
288 | #define SMC_insw LPD7_SMC_insw |
289 | static inline void LPD7_SMC_insw (unsigned char* a, int r, | |
290 | unsigned char* p, int l) | |
291 | { | |
292 | unsigned short* ps = (unsigned short*) p; | |
293 | while (l-- > 0) { | |
294 | *ps++ = readw (a + r); | |
295 | LPD7X_IOBARRIER; | |
296 | } | |
297 | } | |
09779c6d | 298 | |
d4adcffb MS |
299 | #define SMC_outsw LPD7_SMC_outsw |
300 | static inline void LPD7_SMC_outsw (unsigned char* a, int r, | |
301 | unsigned char* p, int l) | |
1da177e4 LT |
302 | { |
303 | unsigned short* ps = (unsigned short*) p; | |
304 | while (l-- > 0) { | |
305 | writew (*ps++, a + r); | |
d4adcffb | 306 | LPD7X_IOBARRIER; |
1da177e4 LT |
307 | } |
308 | } | |
309 | ||
d4adcffb | 310 | #define SMC_INTERRUPT_PREAMBLE LPD7X_IOBARRIER |
1da177e4 LT |
311 | |
312 | #define RPC_LSA_DEFAULT RPC_LED_TX_RX | |
313 | #define RPC_LSB_DEFAULT RPC_LED_100_10 | |
314 | ||
55793455 PP |
315 | #elif defined(CONFIG_SOC_AU1X00) |
316 | ||
317 | #include <au1xxx.h> | |
318 | ||
319 | /* We can only do 16-bit reads and writes in the static memory space. */ | |
320 | #define SMC_CAN_USE_8BIT 0 | |
321 | #define SMC_CAN_USE_16BIT 1 | |
322 | #define SMC_CAN_USE_32BIT 0 | |
323 | #define SMC_IO_SHIFT 0 | |
324 | #define SMC_NOWAIT 1 | |
325 | ||
326 | #define SMC_inw(a, r) au_readw((unsigned long)((a) + (r))) | |
327 | #define SMC_insw(a, r, p, l) \ | |
328 | do { \ | |
329 | unsigned long _a = (unsigned long)((a) + (r)); \ | |
330 | int _l = (l); \ | |
331 | u16 *_p = (u16 *)(p); \ | |
332 | while (_l-- > 0) \ | |
333 | *_p++ = au_readw(_a); \ | |
334 | } while(0) | |
335 | #define SMC_outw(v, a, r) au_writew(v, (unsigned long)((a) + (r))) | |
336 | #define SMC_outsw(a, r, p, l) \ | |
337 | do { \ | |
338 | unsigned long _a = (unsigned long)((a) + (r)); \ | |
339 | int _l = (l); \ | |
340 | const u16 *_p = (const u16 *)(p); \ | |
341 | while (_l-- > 0) \ | |
342 | au_writew(*_p++ , _a); \ | |
343 | } while(0) | |
344 | ||
9ded96f2 | 345 | #define SMC_IRQ_FLAGS (0) |
33fee56a DS |
346 | |
347 | #elif defined(CONFIG_ARCH_VERSATILE) | |
348 | ||
349 | #define SMC_CAN_USE_8BIT 1 | |
350 | #define SMC_CAN_USE_16BIT 1 | |
351 | #define SMC_CAN_USE_32BIT 1 | |
352 | #define SMC_NOWAIT 1 | |
353 | ||
354 | #define SMC_inb(a, r) readb((a) + (r)) | |
355 | #define SMC_inw(a, r) readw((a) + (r)) | |
356 | #define SMC_inl(a, r) readl((a) + (r)) | |
357 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
358 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
359 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
360 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) | |
361 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) | |
362 | ||
363 | #define SMC_IRQ_FLAGS (0) | |
55793455 | 364 | |
8431adfd DS |
365 | #elif defined(CONFIG_ARCH_VERSATILE) |
366 | ||
367 | #define SMC_CAN_USE_8BIT 1 | |
368 | #define SMC_CAN_USE_16BIT 1 | |
369 | #define SMC_CAN_USE_32BIT 1 | |
370 | #define SMC_NOWAIT 1 | |
371 | ||
372 | #define SMC_inb(a, r) readb((a) + (r)) | |
373 | #define SMC_inw(a, r) readw((a) + (r)) | |
374 | #define SMC_inl(a, r) readl((a) + (r)) | |
375 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
376 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
377 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
378 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) | |
6432dc1f | 379 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) |
718ecac2 DS |
380 | |
381 | #define SMC_IRQ_FLAGS (0) | |
382 | ||
383 | #elif defined(CONFIG_ARCH_VERSATILE) | |
384 | ||
385 | #define SMC_CAN_USE_8BIT 1 | |
386 | #define SMC_CAN_USE_16BIT 1 | |
387 | #define SMC_CAN_USE_32BIT 1 | |
388 | #define SMC_NOWAIT 1 | |
389 | ||
390 | #define SMC_inb(a, r) readb((a) + (r)) | |
391 | #define SMC_inw(a, r) readw((a) + (r)) | |
392 | #define SMC_inl(a, r) readl((a) + (r)) | |
393 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
394 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
395 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
396 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) | |
397 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) | |
6432dc1f DS |
398 | |
399 | #define SMC_IRQ_FLAGS (0) | |
400 | ||
401 | #elif defined(CONFIG_ARCH_VERSATILE) | |
402 | ||
403 | #define SMC_CAN_USE_8BIT 1 | |
404 | #define SMC_CAN_USE_16BIT 1 | |
405 | #define SMC_CAN_USE_32BIT 1 | |
406 | #define SMC_NOWAIT 1 | |
407 | ||
408 | #define SMC_inb(a, r) readb((a) + (r)) | |
409 | #define SMC_inw(a, r) readw((a) + (r)) | |
410 | #define SMC_inl(a, r) readl((a) + (r)) | |
411 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
412 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
413 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
12f417ee DS |
414 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) |
415 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) | |
416 | ||
417 | #define SMC_IRQ_FLAGS (0) | |
418 | ||
419 | #elif defined(CONFIG_ARCH_VERSATILE) | |
420 | ||
421 | #define SMC_CAN_USE_8BIT 1 | |
422 | #define SMC_CAN_USE_16BIT 1 | |
423 | #define SMC_CAN_USE_32BIT 1 | |
424 | #define SMC_NOWAIT 1 | |
425 | ||
426 | #define SMC_inb(a, r) readb((a) + (r)) | |
427 | #define SMC_inw(a, r) readw((a) + (r)) | |
428 | #define SMC_inl(a, r) readl((a) + (r)) | |
429 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
430 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
431 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
6432dc1f | 432 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) |
8431adfd DS |
433 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) |
434 | ||
435 | #define SMC_IRQ_FLAGS (0) | |
436 | ||
6fd7587b DS |
437 | #elif defined(CONFIG_ARCH_VERSATILE) |
438 | ||
439 | #define SMC_CAN_USE_8BIT 1 | |
440 | #define SMC_CAN_USE_16BIT 1 | |
441 | #define SMC_CAN_USE_32BIT 1 | |
442 | #define SMC_NOWAIT 1 | |
443 | ||
444 | #define SMC_inb(a, r) readb((a) + (r)) | |
445 | #define SMC_inw(a, r) readw((a) + (r)) | |
446 | #define SMC_inl(a, r) readl((a) + (r)) | |
447 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
448 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
449 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
450 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) | |
451 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) | |
452 | ||
453 | #define SMC_IRQ_FLAGS (0) | |
454 | ||
1da177e4 LT |
455 | #else |
456 | ||
457 | #define SMC_CAN_USE_8BIT 1 | |
458 | #define SMC_CAN_USE_16BIT 1 | |
459 | #define SMC_CAN_USE_32BIT 1 | |
460 | #define SMC_NOWAIT 1 | |
461 | ||
462 | #define SMC_inb(a, r) readb((a) + (r)) | |
463 | #define SMC_inw(a, r) readw((a) + (r)) | |
464 | #define SMC_inl(a, r) readl((a) + (r)) | |
465 | #define SMC_outb(v, a, r) writeb(v, (a) + (r)) | |
466 | #define SMC_outw(v, a, r) writew(v, (a) + (r)) | |
467 | #define SMC_outl(v, a, r) writel(v, (a) + (r)) | |
468 | #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) | |
469 | #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) | |
470 | ||
471 | #define RPC_LSA_DEFAULT RPC_LED_100_10 | |
472 | #define RPC_LSB_DEFAULT RPC_LED_TX_RX | |
473 | ||
474 | #endif | |
475 | ||
1da177e4 LT |
476 | #ifdef SMC_USE_PXA_DMA |
477 | /* | |
478 | * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is | |
479 | * always happening in irq context so no need to worry about races. TX is | |
480 | * different and probably not worth it for that reason, and not as critical | |
481 | * as RX which can overrun memory and lose packets. | |
482 | */ | |
483 | #include <linux/dma-mapping.h> | |
484 | #include <asm/dma.h> | |
485 | #include <asm/arch/pxa-regs.h> | |
486 | ||
487 | #ifdef SMC_insl | |
488 | #undef SMC_insl | |
489 | #define SMC_insl(a, r, p, l) \ | |
490 | smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l) | |
491 | static inline void | |
eb1d6988 | 492 | smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma, |
1da177e4 LT |
493 | u_char *buf, int len) |
494 | { | |
495 | dma_addr_t dmabuf; | |
496 | ||
497 | /* fallback if no DMA available */ | |
498 | if (dma == (unsigned char)-1) { | |
499 | readsl(ioaddr + reg, buf, len); | |
500 | return; | |
501 | } | |
502 | ||
503 | /* 64 bit alignment is required for memory to memory DMA */ | |
504 | if ((long)buf & 4) { | |
505 | *((u32 *)buf) = SMC_inl(ioaddr, reg); | |
506 | buf += 4; | |
507 | len--; | |
508 | } | |
509 | ||
510 | len *= 4; | |
511 | dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE); | |
512 | DCSR(dma) = DCSR_NODESC; | |
513 | DTADR(dma) = dmabuf; | |
514 | DSADR(dma) = physaddr + reg; | |
515 | DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 | | |
516 | DCMD_WIDTH4 | (DCMD_LENGTH & len)); | |
517 | DCSR(dma) = DCSR_NODESC | DCSR_RUN; | |
518 | while (!(DCSR(dma) & DCSR_STOPSTATE)) | |
519 | cpu_relax(); | |
520 | DCSR(dma) = 0; | |
521 | dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE); | |
522 | } | |
523 | #endif | |
524 | ||
525 | #ifdef SMC_insw | |
526 | #undef SMC_insw | |
527 | #define SMC_insw(a, r, p, l) \ | |
528 | smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l) | |
529 | static inline void | |
eb1d6988 | 530 | smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma, |
1da177e4 LT |
531 | u_char *buf, int len) |
532 | { | |
533 | dma_addr_t dmabuf; | |
534 | ||
535 | /* fallback if no DMA available */ | |
536 | if (dma == (unsigned char)-1) { | |
537 | readsw(ioaddr + reg, buf, len); | |
538 | return; | |
539 | } | |
540 | ||
541 | /* 64 bit alignment is required for memory to memory DMA */ | |
542 | while ((long)buf & 6) { | |
543 | *((u16 *)buf) = SMC_inw(ioaddr, reg); | |
544 | buf += 2; | |
545 | len--; | |
546 | } | |
547 | ||
548 | len *= 2; | |
549 | dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE); | |
550 | DCSR(dma) = DCSR_NODESC; | |
551 | DTADR(dma) = dmabuf; | |
552 | DSADR(dma) = physaddr + reg; | |
553 | DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 | | |
554 | DCMD_WIDTH2 | (DCMD_LENGTH & len)); | |
555 | DCSR(dma) = DCSR_NODESC | DCSR_RUN; | |
556 | while (!(DCSR(dma) & DCSR_STOPSTATE)) | |
557 | cpu_relax(); | |
558 | DCSR(dma) = 0; | |
559 | dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE); | |
560 | } | |
561 | #endif | |
562 | ||
563 | static void | |
7d12e780 | 564 | smc_pxa_dma_irq(int dma, void *dummy) |
1da177e4 LT |
565 | { |
566 | DCSR(dma) = 0; | |
567 | } | |
568 | #endif /* SMC_USE_PXA_DMA */ | |
569 | ||
570 | ||
09779c6d NP |
571 | /* |
572 | * Everything a particular hardware setup needs should have been defined | |
573 | * at this point. Add stubs for the undefined cases, mainly to avoid | |
574 | * compilation warnings since they'll be optimized away, or to prevent buggy | |
575 | * use of them. | |
576 | */ | |
577 | ||
578 | #if ! SMC_CAN_USE_32BIT | |
579 | #define SMC_inl(ioaddr, reg) ({ BUG(); 0; }) | |
580 | #define SMC_outl(x, ioaddr, reg) BUG() | |
581 | #define SMC_insl(a, r, p, l) BUG() | |
582 | #define SMC_outsl(a, r, p, l) BUG() | |
583 | #endif | |
584 | ||
585 | #if !defined(SMC_insl) || !defined(SMC_outsl) | |
586 | #define SMC_insl(a, r, p, l) BUG() | |
587 | #define SMC_outsl(a, r, p, l) BUG() | |
588 | #endif | |
589 | ||
590 | #if ! SMC_CAN_USE_16BIT | |
591 | ||
592 | /* | |
593 | * Any 16-bit access is performed with two 8-bit accesses if the hardware | |
594 | * can't do it directly. Most registers are 16-bit so those are mandatory. | |
595 | */ | |
596 | #define SMC_outw(x, ioaddr, reg) \ | |
597 | do { \ | |
598 | unsigned int __val16 = (x); \ | |
599 | SMC_outb( __val16, ioaddr, reg ); \ | |
600 | SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\ | |
601 | } while (0) | |
602 | #define SMC_inw(ioaddr, reg) \ | |
603 | ({ \ | |
604 | unsigned int __val16; \ | |
605 | __val16 = SMC_inb( ioaddr, reg ); \ | |
606 | __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \ | |
607 | __val16; \ | |
608 | }) | |
609 | ||
610 | #define SMC_insw(a, r, p, l) BUG() | |
611 | #define SMC_outsw(a, r, p, l) BUG() | |
612 | ||
613 | #endif | |
614 | ||
615 | #if !defined(SMC_insw) || !defined(SMC_outsw) | |
616 | #define SMC_insw(a, r, p, l) BUG() | |
617 | #define SMC_outsw(a, r, p, l) BUG() | |
618 | #endif | |
619 | ||
620 | #if ! SMC_CAN_USE_8BIT | |
621 | #define SMC_inb(ioaddr, reg) ({ BUG(); 0; }) | |
622 | #define SMC_outb(x, ioaddr, reg) BUG() | |
623 | #define SMC_insb(a, r, p, l) BUG() | |
624 | #define SMC_outsb(a, r, p, l) BUG() | |
625 | #endif | |
626 | ||
627 | #if !defined(SMC_insb) || !defined(SMC_outsb) | |
628 | #define SMC_insb(a, r, p, l) BUG() | |
629 | #define SMC_outsb(a, r, p, l) BUG() | |
630 | #endif | |
631 | ||
632 | #ifndef SMC_CAN_USE_DATACS | |
633 | #define SMC_CAN_USE_DATACS 0 | |
634 | #endif | |
635 | ||
1da177e4 LT |
636 | #ifndef SMC_IO_SHIFT |
637 | #define SMC_IO_SHIFT 0 | |
638 | #endif | |
09779c6d NP |
639 | |
640 | #ifndef SMC_IRQ_FLAGS | |
1fb9df5d | 641 | #define SMC_IRQ_FLAGS IRQF_TRIGGER_RISING |
09779c6d NP |
642 | #endif |
643 | ||
644 | #ifndef SMC_INTERRUPT_PREAMBLE | |
645 | #define SMC_INTERRUPT_PREAMBLE | |
646 | #endif | |
647 | ||
648 | ||
649 | /* Because of bank switching, the LAN91x uses only 16 I/O ports */ | |
1da177e4 LT |
650 | #define SMC_IO_EXTENT (16 << SMC_IO_SHIFT) |
651 | #define SMC_DATA_EXTENT (4) | |
652 | ||
653 | /* | |
654 | . Bank Select Register: | |
655 | . | |
656 | . yyyy yyyy 0000 00xx | |
657 | . xx = bank number | |
658 | . yyyy yyyy = 0x33, for identification purposes. | |
659 | */ | |
660 | #define BANK_SELECT (14 << SMC_IO_SHIFT) | |
661 | ||
662 | ||
663 | // Transmit Control Register | |
664 | /* BANK 0 */ | |
665 | #define TCR_REG SMC_REG(0x0000, 0) | |
666 | #define TCR_ENABLE 0x0001 // When 1 we can transmit | |
667 | #define TCR_LOOP 0x0002 // Controls output pin LBK | |
668 | #define TCR_FORCOL 0x0004 // When 1 will force a collision | |
669 | #define TCR_PAD_EN 0x0080 // When 1 will pad tx frames < 64 bytes w/0 | |
670 | #define TCR_NOCRC 0x0100 // When 1 will not append CRC to tx frames | |
671 | #define TCR_MON_CSN 0x0400 // When 1 tx monitors carrier | |
672 | #define TCR_FDUPLX 0x0800 // When 1 enables full duplex operation | |
673 | #define TCR_STP_SQET 0x1000 // When 1 stops tx if Signal Quality Error | |
674 | #define TCR_EPH_LOOP 0x2000 // When 1 enables EPH block loopback | |
675 | #define TCR_SWFDUP 0x8000 // When 1 enables Switched Full Duplex mode | |
676 | ||
677 | #define TCR_CLEAR 0 /* do NOTHING */ | |
678 | /* the default settings for the TCR register : */ | |
679 | #define TCR_DEFAULT (TCR_ENABLE | TCR_PAD_EN) | |
680 | ||
681 | ||
682 | // EPH Status Register | |
683 | /* BANK 0 */ | |
684 | #define EPH_STATUS_REG SMC_REG(0x0002, 0) | |
685 | #define ES_TX_SUC 0x0001 // Last TX was successful | |
686 | #define ES_SNGL_COL 0x0002 // Single collision detected for last tx | |
687 | #define ES_MUL_COL 0x0004 // Multiple collisions detected for last tx | |
688 | #define ES_LTX_MULT 0x0008 // Last tx was a multicast | |
689 | #define ES_16COL 0x0010 // 16 Collisions Reached | |
690 | #define ES_SQET 0x0020 // Signal Quality Error Test | |
691 | #define ES_LTXBRD 0x0040 // Last tx was a broadcast | |
692 | #define ES_TXDEFR 0x0080 // Transmit Deferred | |
693 | #define ES_LATCOL 0x0200 // Late collision detected on last tx | |
694 | #define ES_LOSTCARR 0x0400 // Lost Carrier Sense | |
695 | #define ES_EXC_DEF 0x0800 // Excessive Deferral | |
696 | #define ES_CTR_ROL 0x1000 // Counter Roll Over indication | |
697 | #define ES_LINK_OK 0x4000 // Driven by inverted value of nLNK pin | |
698 | #define ES_TXUNRN 0x8000 // Tx Underrun | |
699 | ||
700 | ||
701 | // Receive Control Register | |
702 | /* BANK 0 */ | |
703 | #define RCR_REG SMC_REG(0x0004, 0) | |
704 | #define RCR_RX_ABORT 0x0001 // Set if a rx frame was aborted | |
705 | #define RCR_PRMS 0x0002 // Enable promiscuous mode | |
706 | #define RCR_ALMUL 0x0004 // When set accepts all multicast frames | |
707 | #define RCR_RXEN 0x0100 // IFF this is set, we can receive packets | |
708 | #define RCR_STRIP_CRC 0x0200 // When set strips CRC from rx packets | |
709 | #define RCR_ABORT_ENB 0x0200 // When set will abort rx on collision | |
710 | #define RCR_FILT_CAR 0x0400 // When set filters leading 12 bit s of carrier | |
711 | #define RCR_SOFTRST 0x8000 // resets the chip | |
712 | ||
713 | /* the normal settings for the RCR register : */ | |
714 | #define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN) | |
715 | #define RCR_CLEAR 0x0 // set it to a base state | |
716 | ||
717 | ||
718 | // Counter Register | |
719 | /* BANK 0 */ | |
720 | #define COUNTER_REG SMC_REG(0x0006, 0) | |
721 | ||
722 | ||
723 | // Memory Information Register | |
724 | /* BANK 0 */ | |
725 | #define MIR_REG SMC_REG(0x0008, 0) | |
726 | ||
727 | ||
728 | // Receive/Phy Control Register | |
729 | /* BANK 0 */ | |
730 | #define RPC_REG SMC_REG(0x000A, 0) | |
731 | #define RPC_SPEED 0x2000 // When 1 PHY is in 100Mbps mode. | |
732 | #define RPC_DPLX 0x1000 // When 1 PHY is in Full-Duplex Mode | |
733 | #define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode | |
734 | #define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb | |
735 | #define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb | |
736 | #define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect | |
737 | #define RPC_LED_RES (0x01) // LED = Reserved | |
738 | #define RPC_LED_10 (0x02) // LED = 10Mbps link detect | |
739 | #define RPC_LED_FD (0x03) // LED = Full Duplex Mode | |
740 | #define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred | |
741 | #define RPC_LED_100 (0x05) // LED = 100Mbps link dectect | |
742 | #define RPC_LED_TX (0x06) // LED = TX packet occurred | |
743 | #define RPC_LED_RX (0x07) // LED = RX packet occurred | |
744 | ||
745 | #ifndef RPC_LSA_DEFAULT | |
746 | #define RPC_LSA_DEFAULT RPC_LED_100 | |
747 | #endif | |
748 | #ifndef RPC_LSB_DEFAULT | |
749 | #define RPC_LSB_DEFAULT RPC_LED_FD | |
750 | #endif | |
751 | ||
752 | #define RPC_DEFAULT (RPC_ANEG | (RPC_LSA_DEFAULT << RPC_LSXA_SHFT) | (RPC_LSB_DEFAULT << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX) | |
753 | ||
754 | ||
755 | /* Bank 0 0x0C is reserved */ | |
756 | ||
757 | // Bank Select Register | |
758 | /* All Banks */ | |
759 | #define BSR_REG 0x000E | |
760 | ||
761 | ||
762 | // Configuration Reg | |
763 | /* BANK 1 */ | |
764 | #define CONFIG_REG SMC_REG(0x0000, 1) | |
765 | #define CONFIG_EXT_PHY 0x0200 // 1=external MII, 0=internal Phy | |
766 | #define CONFIG_GPCNTRL 0x0400 // Inverse value drives pin nCNTRL | |
767 | #define CONFIG_NO_WAIT 0x1000 // When 1 no extra wait states on ISA bus | |
768 | #define CONFIG_EPH_POWER_EN 0x8000 // When 0 EPH is placed into low power mode. | |
769 | ||
770 | // Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low | |
771 | #define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN) | |
772 | ||
773 | ||
774 | // Base Address Register | |
775 | /* BANK 1 */ | |
776 | #define BASE_REG SMC_REG(0x0002, 1) | |
777 | ||
778 | ||
779 | // Individual Address Registers | |
780 | /* BANK 1 */ | |
781 | #define ADDR0_REG SMC_REG(0x0004, 1) | |
782 | #define ADDR1_REG SMC_REG(0x0006, 1) | |
783 | #define ADDR2_REG SMC_REG(0x0008, 1) | |
784 | ||
785 | ||
786 | // General Purpose Register | |
787 | /* BANK 1 */ | |
788 | #define GP_REG SMC_REG(0x000A, 1) | |
789 | ||
790 | ||
791 | // Control Register | |
792 | /* BANK 1 */ | |
793 | #define CTL_REG SMC_REG(0x000C, 1) | |
794 | #define CTL_RCV_BAD 0x4000 // When 1 bad CRC packets are received | |
795 | #define CTL_AUTO_RELEASE 0x0800 // When 1 tx pages are released automatically | |
796 | #define CTL_LE_ENABLE 0x0080 // When 1 enables Link Error interrupt | |
797 | #define CTL_CR_ENABLE 0x0040 // When 1 enables Counter Rollover interrupt | |
798 | #define CTL_TE_ENABLE 0x0020 // When 1 enables Transmit Error interrupt | |
799 | #define CTL_EEPROM_SELECT 0x0004 // Controls EEPROM reload & store | |
800 | #define CTL_RELOAD 0x0002 // When set reads EEPROM into registers | |
801 | #define CTL_STORE 0x0001 // When set stores registers into EEPROM | |
802 | ||
803 | ||
804 | // MMU Command Register | |
805 | /* BANK 2 */ | |
806 | #define MMU_CMD_REG SMC_REG(0x0000, 2) | |
807 | #define MC_BUSY 1 // When 1 the last release has not completed | |
808 | #define MC_NOP (0<<5) // No Op | |
809 | #define MC_ALLOC (1<<5) // OR with number of 256 byte packets | |
810 | #define MC_RESET (2<<5) // Reset MMU to initial state | |
811 | #define MC_REMOVE (3<<5) // Remove the current rx packet | |
812 | #define MC_RELEASE (4<<5) // Remove and release the current rx packet | |
813 | #define MC_FREEPKT (5<<5) // Release packet in PNR register | |
814 | #define MC_ENQUEUE (6<<5) // Enqueue the packet for transmit | |
815 | #define MC_RSTTXFIFO (7<<5) // Reset the TX FIFOs | |
816 | ||
817 | ||
818 | // Packet Number Register | |
819 | /* BANK 2 */ | |
820 | #define PN_REG SMC_REG(0x0002, 2) | |
821 | ||
822 | ||
823 | // Allocation Result Register | |
824 | /* BANK 2 */ | |
825 | #define AR_REG SMC_REG(0x0003, 2) | |
826 | #define AR_FAILED 0x80 // Alocation Failed | |
827 | ||
828 | ||
829 | // TX FIFO Ports Register | |
830 | /* BANK 2 */ | |
831 | #define TXFIFO_REG SMC_REG(0x0004, 2) | |
832 | #define TXFIFO_TEMPTY 0x80 // TX FIFO Empty | |
833 | ||
834 | // RX FIFO Ports Register | |
835 | /* BANK 2 */ | |
836 | #define RXFIFO_REG SMC_REG(0x0005, 2) | |
837 | #define RXFIFO_REMPTY 0x80 // RX FIFO Empty | |
838 | ||
839 | #define FIFO_REG SMC_REG(0x0004, 2) | |
840 | ||
841 | // Pointer Register | |
842 | /* BANK 2 */ | |
843 | #define PTR_REG SMC_REG(0x0006, 2) | |
844 | #define PTR_RCV 0x8000 // 1=Receive area, 0=Transmit area | |
845 | #define PTR_AUTOINC 0x4000 // Auto increment the pointer on each access | |
846 | #define PTR_READ 0x2000 // When 1 the operation is a read | |
847 | ||
848 | ||
849 | // Data Register | |
850 | /* BANK 2 */ | |
851 | #define DATA_REG SMC_REG(0x0008, 2) | |
852 | ||
853 | ||
854 | // Interrupt Status/Acknowledge Register | |
855 | /* BANK 2 */ | |
856 | #define INT_REG SMC_REG(0x000C, 2) | |
857 | ||
858 | ||
859 | // Interrupt Mask Register | |
860 | /* BANK 2 */ | |
861 | #define IM_REG SMC_REG(0x000D, 2) | |
862 | #define IM_MDINT 0x80 // PHY MI Register 18 Interrupt | |
863 | #define IM_ERCV_INT 0x40 // Early Receive Interrupt | |
864 | #define IM_EPH_INT 0x20 // Set by Ethernet Protocol Handler section | |
865 | #define IM_RX_OVRN_INT 0x10 // Set by Receiver Overruns | |
866 | #define IM_ALLOC_INT 0x08 // Set when allocation request is completed | |
867 | #define IM_TX_EMPTY_INT 0x04 // Set if the TX FIFO goes empty | |
868 | #define IM_TX_INT 0x02 // Transmit Interrupt | |
869 | #define IM_RCV_INT 0x01 // Receive Interrupt | |
870 | ||
871 | ||
872 | // Multicast Table Registers | |
873 | /* BANK 3 */ | |
874 | #define MCAST_REG1 SMC_REG(0x0000, 3) | |
875 | #define MCAST_REG2 SMC_REG(0x0002, 3) | |
876 | #define MCAST_REG3 SMC_REG(0x0004, 3) | |
877 | #define MCAST_REG4 SMC_REG(0x0006, 3) | |
878 | ||
879 | ||
880 | // Management Interface Register (MII) | |
881 | /* BANK 3 */ | |
882 | #define MII_REG SMC_REG(0x0008, 3) | |
883 | #define MII_MSK_CRS100 0x4000 // Disables CRS100 detection during tx half dup | |
884 | #define MII_MDOE 0x0008 // MII Output Enable | |
885 | #define MII_MCLK 0x0004 // MII Clock, pin MDCLK | |
886 | #define MII_MDI 0x0002 // MII Input, pin MDI | |
887 | #define MII_MDO 0x0001 // MII Output, pin MDO | |
888 | ||
889 | ||
890 | // Revision Register | |
891 | /* BANK 3 */ | |
892 | /* ( hi: chip id low: rev # ) */ | |
893 | #define REV_REG SMC_REG(0x000A, 3) | |
894 | ||
895 | ||
896 | // Early RCV Register | |
897 | /* BANK 3 */ | |
898 | /* this is NOT on SMC9192 */ | |
899 | #define ERCV_REG SMC_REG(0x000C, 3) | |
900 | #define ERCV_RCV_DISCRD 0x0080 // When 1 discards a packet being received | |
901 | #define ERCV_THRESHOLD 0x001F // ERCV Threshold Mask | |
902 | ||
903 | ||
904 | // External Register | |
905 | /* BANK 7 */ | |
906 | #define EXT_REG SMC_REG(0x0000, 7) | |
907 | ||
908 | ||
909 | #define CHIP_9192 3 | |
910 | #define CHIP_9194 4 | |
911 | #define CHIP_9195 5 | |
912 | #define CHIP_9196 6 | |
913 | #define CHIP_91100 7 | |
914 | #define CHIP_91100FD 8 | |
915 | #define CHIP_91111FD 9 | |
916 | ||
917 | static const char * chip_ids[ 16 ] = { | |
918 | NULL, NULL, NULL, | |
919 | /* 3 */ "SMC91C90/91C92", | |
920 | /* 4 */ "SMC91C94", | |
921 | /* 5 */ "SMC91C95", | |
922 | /* 6 */ "SMC91C96", | |
923 | /* 7 */ "SMC91C100", | |
924 | /* 8 */ "SMC91C100FD", | |
925 | /* 9 */ "SMC91C11xFD", | |
926 | NULL, NULL, NULL, | |
927 | NULL, NULL, NULL}; | |
928 | ||
929 | ||
1da177e4 LT |
930 | /* |
931 | . Receive status bits | |
932 | */ | |
933 | #define RS_ALGNERR 0x8000 | |
934 | #define RS_BRODCAST 0x4000 | |
935 | #define RS_BADCRC 0x2000 | |
936 | #define RS_ODDFRAME 0x1000 | |
937 | #define RS_TOOLONG 0x0800 | |
938 | #define RS_TOOSHORT 0x0400 | |
939 | #define RS_MULTICAST 0x0001 | |
940 | #define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT) | |
941 | ||
942 | ||
943 | /* | |
944 | * PHY IDs | |
945 | * LAN83C183 == LAN91C111 Internal PHY | |
946 | */ | |
947 | #define PHY_LAN83C183 0x0016f840 | |
948 | #define PHY_LAN83C180 0x02821c50 | |
949 | ||
950 | /* | |
951 | * PHY Register Addresses (LAN91C111 Internal PHY) | |
952 | * | |
953 | * Generic PHY registers can be found in <linux/mii.h> | |
954 | * | |
955 | * These phy registers are specific to our on-board phy. | |
956 | */ | |
957 | ||
958 | // PHY Configuration Register 1 | |
959 | #define PHY_CFG1_REG 0x10 | |
960 | #define PHY_CFG1_LNKDIS 0x8000 // 1=Rx Link Detect Function disabled | |
961 | #define PHY_CFG1_XMTDIS 0x4000 // 1=TP Transmitter Disabled | |
962 | #define PHY_CFG1_XMTPDN 0x2000 // 1=TP Transmitter Powered Down | |
963 | #define PHY_CFG1_BYPSCR 0x0400 // 1=Bypass scrambler/descrambler | |
964 | #define PHY_CFG1_UNSCDS 0x0200 // 1=Unscramble Idle Reception Disable | |
965 | #define PHY_CFG1_EQLZR 0x0100 // 1=Rx Equalizer Disabled | |
966 | #define PHY_CFG1_CABLE 0x0080 // 1=STP(150ohm), 0=UTP(100ohm) | |
967 | #define PHY_CFG1_RLVL0 0x0040 // 1=Rx Squelch level reduced by 4.5db | |
968 | #define PHY_CFG1_TLVL_SHIFT 2 // Transmit Output Level Adjust | |
969 | #define PHY_CFG1_TLVL_MASK 0x003C | |
970 | #define PHY_CFG1_TRF_MASK 0x0003 // Transmitter Rise/Fall time | |
971 | ||
972 | ||
973 | // PHY Configuration Register 2 | |
974 | #define PHY_CFG2_REG 0x11 | |
975 | #define PHY_CFG2_APOLDIS 0x0020 // 1=Auto Polarity Correction disabled | |
976 | #define PHY_CFG2_JABDIS 0x0010 // 1=Jabber disabled | |
977 | #define PHY_CFG2_MREG 0x0008 // 1=Multiple register access (MII mgt) | |
978 | #define PHY_CFG2_INTMDIO 0x0004 // 1=Interrupt signaled with MDIO pulseo | |
979 | ||
980 | // PHY Status Output (and Interrupt status) Register | |
981 | #define PHY_INT_REG 0x12 // Status Output (Interrupt Status) | |
982 | #define PHY_INT_INT 0x8000 // 1=bits have changed since last read | |
983 | #define PHY_INT_LNKFAIL 0x4000 // 1=Link Not detected | |
984 | #define PHY_INT_LOSSSYNC 0x2000 // 1=Descrambler has lost sync | |
985 | #define PHY_INT_CWRD 0x1000 // 1=Invalid 4B5B code detected on rx | |
986 | #define PHY_INT_SSD 0x0800 // 1=No Start Of Stream detected on rx | |
987 | #define PHY_INT_ESD 0x0400 // 1=No End Of Stream detected on rx | |
988 | #define PHY_INT_RPOL 0x0200 // 1=Reverse Polarity detected | |
989 | #define PHY_INT_JAB 0x0100 // 1=Jabber detected | |
990 | #define PHY_INT_SPDDET 0x0080 // 1=100Base-TX mode, 0=10Base-T mode | |
991 | #define PHY_INT_DPLXDET 0x0040 // 1=Device in Full Duplex | |
992 | ||
993 | // PHY Interrupt/Status Mask Register | |
994 | #define PHY_MASK_REG 0x13 // Interrupt Mask | |
995 | // Uses the same bit definitions as PHY_INT_REG | |
996 | ||
997 | ||
998 | /* | |
999 | * SMC91C96 ethernet config and status registers. | |
1000 | * These are in the "attribute" space. | |
1001 | */ | |
1002 | #define ECOR 0x8000 | |
1003 | #define ECOR_RESET 0x80 | |
1004 | #define ECOR_LEVEL_IRQ 0x40 | |
1005 | #define ECOR_WR_ATTRIB 0x04 | |
1006 | #define ECOR_ENABLE 0x01 | |
1007 | ||
1008 | #define ECSR 0x8002 | |
1009 | #define ECSR_IOIS8 0x20 | |
1010 | #define ECSR_PWRDWN 0x04 | |
1011 | #define ECSR_INT 0x02 | |
1012 | ||
1013 | #define ATTRIB_SIZE ((64*1024) << SMC_IO_SHIFT) | |
1014 | ||
1015 | ||
1016 | /* | |
1017 | * Macros to abstract register access according to the data bus | |
1018 | * capabilities. Please use those and not the in/out primitives. | |
1019 | * Note: the following macros do *not* select the bank -- this must | |
1020 | * be done separately as needed in the main code. The SMC_REG() macro | |
1021 | * only uses the bank argument for debugging purposes (when enabled). | |
09779c6d NP |
1022 | * |
1023 | * Note: despite inline functions being safer, everything leading to this | |
1024 | * should preferably be macros to let BUG() display the line number in | |
1025 | * the core source code since we're interested in the top call site | |
1026 | * not in any inline function location. | |
1da177e4 LT |
1027 | */ |
1028 | ||
1029 | #if SMC_DEBUG > 0 | |
1030 | #define SMC_REG(reg, bank) \ | |
1031 | ({ \ | |
1032 | int __b = SMC_CURRENT_BANK(); \ | |
1033 | if (unlikely((__b & ~0xf0) != (0x3300 | bank))) { \ | |
1034 | printk( "%s: bank reg screwed (0x%04x)\n", \ | |
1035 | CARDNAME, __b ); \ | |
1036 | BUG(); \ | |
1037 | } \ | |
1038 | reg<<SMC_IO_SHIFT; \ | |
1039 | }) | |
1040 | #else | |
1041 | #define SMC_REG(reg, bank) (reg<<SMC_IO_SHIFT) | |
1042 | #endif | |
1043 | ||
09779c6d NP |
1044 | /* |
1045 | * Hack Alert: Some setups just can't write 8 or 16 bits reliably when not | |
1046 | * aligned to a 32 bit boundary. I tell you that does exist! | |
1047 | * Fortunately the affected register accesses can be easily worked around | |
1048 | * since we can write zeroes to the preceeding 16 bits without adverse | |
1049 | * effects and use a 32-bit access. | |
1050 | * | |
1051 | * Enforce it on any 32-bit capable setup for now. | |
1052 | */ | |
1053 | #define SMC_MUST_ALIGN_WRITE SMC_CAN_USE_32BIT | |
1054 | ||
1055 | #define SMC_GET_PN() \ | |
1056 | ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, PN_REG)) \ | |
1057 | : (SMC_inw(ioaddr, PN_REG) & 0xFF) ) | |
1058 | ||
1059 | #define SMC_SET_PN(x) \ | |
1060 | do { \ | |
1061 | if (SMC_MUST_ALIGN_WRITE) \ | |
1062 | SMC_outl((x)<<16, ioaddr, SMC_REG(0, 2)); \ | |
1063 | else if (SMC_CAN_USE_8BIT) \ | |
1064 | SMC_outb(x, ioaddr, PN_REG); \ | |
1065 | else \ | |
1066 | SMC_outw(x, ioaddr, PN_REG); \ | |
1067 | } while (0) | |
1068 | ||
1069 | #define SMC_GET_AR() \ | |
1070 | ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, AR_REG)) \ | |
1071 | : (SMC_inw(ioaddr, PN_REG) >> 8) ) | |
1072 | ||
1073 | #define SMC_GET_TXFIFO() \ | |
1074 | ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG)) \ | |
1075 | : (SMC_inw(ioaddr, TXFIFO_REG) & 0xFF) ) | |
1076 | ||
1077 | #define SMC_GET_RXFIFO() \ | |
1078 | ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG)) \ | |
1079 | : (SMC_inw(ioaddr, TXFIFO_REG) >> 8) ) | |
1080 | ||
1081 | #define SMC_GET_INT() \ | |
1082 | ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG)) \ | |
1083 | : (SMC_inw(ioaddr, INT_REG) & 0xFF) ) | |
1084 | ||
1da177e4 LT |
1085 | #define SMC_ACK_INT(x) \ |
1086 | do { \ | |
09779c6d NP |
1087 | if (SMC_CAN_USE_8BIT) \ |
1088 | SMC_outb(x, ioaddr, INT_REG); \ | |
1089 | else { \ | |
1090 | unsigned long __flags; \ | |
1091 | int __mask; \ | |
1092 | local_irq_save(__flags); \ | |
1093 | __mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \ | |
1094 | SMC_outw( __mask | (x), ioaddr, INT_REG ); \ | |
1095 | local_irq_restore(__flags); \ | |
1096 | } \ | |
1097 | } while (0) | |
1098 | ||
1099 | #define SMC_GET_INT_MASK() \ | |
1100 | ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG)) \ | |
1101 | : (SMC_inw( ioaddr, INT_REG ) >> 8) ) | |
1102 | ||
1103 | #define SMC_SET_INT_MASK(x) \ | |
1104 | do { \ | |
1105 | if (SMC_CAN_USE_8BIT) \ | |
1106 | SMC_outb(x, ioaddr, IM_REG); \ | |
1107 | else \ | |
1108 | SMC_outw((x) << 8, ioaddr, INT_REG); \ | |
1109 | } while (0) | |
1110 | ||
1111 | #define SMC_CURRENT_BANK() SMC_inw(ioaddr, BANK_SELECT) | |
1112 | ||
1113 | #define SMC_SELECT_BANK(x) \ | |
1114 | do { \ | |
1115 | if (SMC_MUST_ALIGN_WRITE) \ | |
1116 | SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT); \ | |
1117 | else \ | |
1118 | SMC_outw(x, ioaddr, BANK_SELECT); \ | |
1119 | } while (0) | |
1120 | ||
1121 | #define SMC_GET_BASE() SMC_inw(ioaddr, BASE_REG) | |
1122 | ||
1123 | #define SMC_SET_BASE(x) SMC_outw(x, ioaddr, BASE_REG) | |
1124 | ||
1125 | #define SMC_GET_CONFIG() SMC_inw(ioaddr, CONFIG_REG) | |
1126 | ||
1127 | #define SMC_SET_CONFIG(x) SMC_outw(x, ioaddr, CONFIG_REG) | |
1128 | ||
1129 | #define SMC_GET_COUNTER() SMC_inw(ioaddr, COUNTER_REG) | |
1130 | ||
1131 | #define SMC_GET_CTL() SMC_inw(ioaddr, CTL_REG) | |
1132 | ||
1133 | #define SMC_SET_CTL(x) SMC_outw(x, ioaddr, CTL_REG) | |
1134 | ||
1135 | #define SMC_GET_MII() SMC_inw(ioaddr, MII_REG) | |
1136 | ||
1137 | #define SMC_SET_MII(x) SMC_outw(x, ioaddr, MII_REG) | |
1138 | ||
1139 | #define SMC_GET_MIR() SMC_inw(ioaddr, MIR_REG) | |
1140 | ||
1141 | #define SMC_SET_MIR(x) SMC_outw(x, ioaddr, MIR_REG) | |
1142 | ||
1143 | #define SMC_GET_MMU_CMD() SMC_inw(ioaddr, MMU_CMD_REG) | |
1144 | ||
1145 | #define SMC_SET_MMU_CMD(x) SMC_outw(x, ioaddr, MMU_CMD_REG) | |
1146 | ||
1147 | #define SMC_GET_FIFO() SMC_inw(ioaddr, FIFO_REG) | |
1148 | ||
1149 | #define SMC_GET_PTR() SMC_inw(ioaddr, PTR_REG) | |
1150 | ||
1151 | #define SMC_SET_PTR(x) \ | |
1152 | do { \ | |
1153 | if (SMC_MUST_ALIGN_WRITE) \ | |
1154 | SMC_outl((x)<<16, ioaddr, SMC_REG(4, 2)); \ | |
1155 | else \ | |
1156 | SMC_outw(x, ioaddr, PTR_REG); \ | |
1da177e4 | 1157 | } while (0) |
1da177e4 | 1158 | |
09779c6d NP |
1159 | #define SMC_GET_EPH_STATUS() SMC_inw(ioaddr, EPH_STATUS_REG) |
1160 | ||
1161 | #define SMC_GET_RCR() SMC_inw(ioaddr, RCR_REG) | |
1162 | ||
1163 | #define SMC_SET_RCR(x) SMC_outw(x, ioaddr, RCR_REG) | |
1164 | ||
1165 | #define SMC_GET_REV() SMC_inw(ioaddr, REV_REG) | |
1166 | ||
1167 | #define SMC_GET_RPC() SMC_inw(ioaddr, RPC_REG) | |
1168 | ||
1169 | #define SMC_SET_RPC(x) \ | |
1170 | do { \ | |
1171 | if (SMC_MUST_ALIGN_WRITE) \ | |
1172 | SMC_outl((x)<<16, ioaddr, SMC_REG(8, 0)); \ | |
1173 | else \ | |
1174 | SMC_outw(x, ioaddr, RPC_REG); \ | |
1175 | } while (0) | |
1176 | ||
1177 | #define SMC_GET_TCR() SMC_inw(ioaddr, TCR_REG) | |
1178 | ||
1179 | #define SMC_SET_TCR(x) SMC_outw(x, ioaddr, TCR_REG) | |
1da177e4 LT |
1180 | |
1181 | #ifndef SMC_GET_MAC_ADDR | |
1182 | #define SMC_GET_MAC_ADDR(addr) \ | |
1183 | do { \ | |
1184 | unsigned int __v; \ | |
1185 | __v = SMC_inw( ioaddr, ADDR0_REG ); \ | |
1186 | addr[0] = __v; addr[1] = __v >> 8; \ | |
1187 | __v = SMC_inw( ioaddr, ADDR1_REG ); \ | |
1188 | addr[2] = __v; addr[3] = __v >> 8; \ | |
1189 | __v = SMC_inw( ioaddr, ADDR2_REG ); \ | |
1190 | addr[4] = __v; addr[5] = __v >> 8; \ | |
1191 | } while (0) | |
1192 | #endif | |
1193 | ||
1194 | #define SMC_SET_MAC_ADDR(addr) \ | |
1195 | do { \ | |
1196 | SMC_outw( addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG ); \ | |
1197 | SMC_outw( addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG ); \ | |
1198 | SMC_outw( addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG ); \ | |
1199 | } while (0) | |
1200 | ||
1201 | #define SMC_SET_MCAST(x) \ | |
1202 | do { \ | |
1203 | const unsigned char *mt = (x); \ | |
1204 | SMC_outw( mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1 ); \ | |
1205 | SMC_outw( mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2 ); \ | |
1206 | SMC_outw( mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3 ); \ | |
1207 | SMC_outw( mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4 ); \ | |
1208 | } while (0) | |
1209 | ||
1da177e4 LT |
1210 | #define SMC_PUT_PKT_HDR(status, length) \ |
1211 | do { \ | |
09779c6d NP |
1212 | if (SMC_CAN_USE_32BIT) \ |
1213 | SMC_outl((status) | (length)<<16, ioaddr, DATA_REG); \ | |
1214 | else { \ | |
1215 | SMC_outw(status, ioaddr, DATA_REG); \ | |
1216 | SMC_outw(length, ioaddr, DATA_REG); \ | |
1217 | } \ | |
1da177e4 | 1218 | } while (0) |
1da177e4 | 1219 | |
09779c6d | 1220 | #define SMC_GET_PKT_HDR(status, length) \ |
1da177e4 | 1221 | do { \ |
09779c6d NP |
1222 | if (SMC_CAN_USE_32BIT) { \ |
1223 | unsigned int __val = SMC_inl(ioaddr, DATA_REG); \ | |
1224 | (status) = __val & 0xffff; \ | |
1225 | (length) = __val >> 16; \ | |
1226 | } else { \ | |
1227 | (status) = SMC_inw(ioaddr, DATA_REG); \ | |
1228 | (length) = SMC_inw(ioaddr, DATA_REG); \ | |
1da177e4 LT |
1229 | } \ |
1230 | } while (0) | |
1da177e4 | 1231 | |
09779c6d | 1232 | #define SMC_PUSH_DATA(p, l) \ |
1da177e4 | 1233 | do { \ |
09779c6d NP |
1234 | if (SMC_CAN_USE_32BIT) { \ |
1235 | void *__ptr = (p); \ | |
1236 | int __len = (l); \ | |
fbd81976 | 1237 | void __iomem *__ioaddr = ioaddr; \ |
09779c6d NP |
1238 | if (__len >= 2 && (unsigned long)__ptr & 2) { \ |
1239 | __len -= 2; \ | |
1240 | SMC_outw(*(u16 *)__ptr, ioaddr, DATA_REG); \ | |
1241 | __ptr += 2; \ | |
1242 | } \ | |
1243 | if (SMC_CAN_USE_DATACS && lp->datacs) \ | |
1244 | __ioaddr = lp->datacs; \ | |
1245 | SMC_outsl(__ioaddr, DATA_REG, __ptr, __len>>2); \ | |
1246 | if (__len & 2) { \ | |
1247 | __ptr += (__len & ~3); \ | |
1248 | SMC_outw(*((u16 *)__ptr), ioaddr, DATA_REG); \ | |
1249 | } \ | |
1250 | } else if (SMC_CAN_USE_16BIT) \ | |
1251 | SMC_outsw(ioaddr, DATA_REG, p, (l) >> 1); \ | |
1252 | else if (SMC_CAN_USE_8BIT) \ | |
1253 | SMC_outsb(ioaddr, DATA_REG, p, l); \ | |
1da177e4 | 1254 | } while (0) |
1da177e4 LT |
1255 | |
1256 | #define SMC_PULL_DATA(p, l) \ | |
09779c6d NP |
1257 | do { \ |
1258 | if (SMC_CAN_USE_32BIT) { \ | |
1259 | void *__ptr = (p); \ | |
1260 | int __len = (l); \ | |
fbd81976 | 1261 | void __iomem *__ioaddr = ioaddr; \ |
09779c6d NP |
1262 | if ((unsigned long)__ptr & 2) { \ |
1263 | /* \ | |
1264 | * We want 32bit alignment here. \ | |
1265 | * Since some buses perform a full \ | |
1266 | * 32bit fetch even for 16bit data \ | |
1267 | * we can't use SMC_inw() here. \ | |
1268 | * Back both source (on-chip) and \ | |
1269 | * destination pointers of 2 bytes. \ | |
1270 | * This is possible since the call to \ | |
1271 | * SMC_GET_PKT_HDR() already advanced \ | |
1272 | * the source pointer of 4 bytes, and \ | |
1273 | * the skb_reserve(skb, 2) advanced \ | |
1274 | * the destination pointer of 2 bytes. \ | |
1275 | */ \ | |
1276 | __ptr -= 2; \ | |
1277 | __len += 2; \ | |
1278 | SMC_SET_PTR(2|PTR_READ|PTR_RCV|PTR_AUTOINC); \ | |
1279 | } \ | |
1280 | if (SMC_CAN_USE_DATACS && lp->datacs) \ | |
1281 | __ioaddr = lp->datacs; \ | |
1da177e4 | 1282 | __len += 2; \ |
09779c6d NP |
1283 | SMC_insl(__ioaddr, DATA_REG, __ptr, __len>>2); \ |
1284 | } else if (SMC_CAN_USE_16BIT) \ | |
1285 | SMC_insw(ioaddr, DATA_REG, p, (l) >> 1); \ | |
1286 | else if (SMC_CAN_USE_8BIT) \ | |
1287 | SMC_insb(ioaddr, DATA_REG, p, l); \ | |
1288 | } while (0) | |
1da177e4 LT |
1289 | |
1290 | #endif /* _SMC91X_H_ */ |