Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /****************************************************************************** |
2 | * | |
3 | * (C)Copyright 1998,1999 SysKonnect, | |
4 | * a business unit of Schneider & Koch & Co. Datensysteme GmbH. | |
5 | * | |
6 | * See the file "skfddi.c" for further information. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation; either version 2 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * The information in this file is provided "AS IS" without warranty. | |
14 | * | |
15 | ******************************************************************************/ | |
16 | ||
17 | /* | |
18 | * FBI board dependent Driver for SMT and LLC | |
19 | */ | |
20 | ||
21 | #include "h/types.h" | |
22 | #include "h/fddi.h" | |
23 | #include "h/smc.h" | |
24 | #include "h/supern_2.h" | |
25 | #include "h/skfbiinc.h" | |
bc63eb9c | 26 | #include <linux/bitrev.h> |
1da177e4 LT |
27 | |
28 | #ifndef lint | |
29 | static const char ID_sccs[] = "@(#)drvfbi.c 1.63 99/02/11 (C) SK " ; | |
30 | #endif | |
31 | ||
32 | /* | |
33 | * PCM active state | |
34 | */ | |
35 | #define PC8_ACTIVE 8 | |
36 | ||
37 | #define LED_Y_ON 0x11 /* Used for ring up/down indication */ | |
38 | #define LED_Y_OFF 0x10 | |
39 | ||
40 | ||
41 | #define MS2BCLK(x) ((x)*12500L) | |
42 | ||
43 | /* | |
44 | * valid configuration values are: | |
45 | */ | |
1da177e4 LT |
46 | |
47 | /* | |
48 | * xPOS_ID:xxxx | |
49 | * | \ / | |
50 | * | \/ | |
51 | * | --------------------- the patched POS_ID of the Adapter | |
52 | * | xxxx = (Vendor ID low byte, | |
53 | * | Vendor ID high byte, | |
54 | * | Device ID low byte, | |
55 | * | Device ID high byte) | |
56 | * +------------------------------ the patched oem_id must be | |
57 | * 'S' for SK or 'I' for IBM | |
58 | * this is a short id for the driver. | |
59 | */ | |
60 | #ifndef MULT_OEM | |
61 | #ifndef OEM_CONCEPT | |
1da177e4 | 62 | const u_char oem_id[] = "xPOS_ID:xxxx" ; |
1da177e4 | 63 | #else /* OEM_CONCEPT */ |
1da177e4 | 64 | const u_char oem_id[] = OEM_ID ; |
1da177e4 LT |
65 | #endif /* OEM_CONCEPT */ |
66 | #define ID_BYTE0 8 | |
67 | #define OEMID(smc,i) oem_id[ID_BYTE0 + i] | |
68 | #else /* MULT_OEM */ | |
69 | const struct s_oem_ids oem_ids[] = { | |
70 | #include "oemids.h" | |
71 | {0} | |
72 | }; | |
73 | #define OEMID(smc,i) smc->hw.oem_id->oi_id[i] | |
74 | #endif /* MULT_OEM */ | |
75 | ||
76 | /* Prototypes of external functions */ | |
77 | #ifdef AIX | |
78 | extern int AIX_vpdReadByte() ; | |
79 | #endif | |
80 | ||
81 | ||
7aa55fce AB |
82 | /* Prototype of a local function. */ |
83 | static void smt_stop_watchdog(struct s_smc *smc); | |
1da177e4 | 84 | |
1da177e4 LT |
85 | /* |
86 | * FDDI card reset | |
87 | */ | |
88 | static void card_start(struct s_smc *smc) | |
89 | { | |
90 | int i ; | |
91 | #ifdef PCI | |
92 | u_char rev_id ; | |
93 | u_short word; | |
94 | #endif | |
95 | ||
96 | smt_stop_watchdog(smc) ; | |
97 | ||
1da177e4 LT |
98 | #ifdef PCI |
99 | /* | |
100 | * make sure no transfer activity is pending | |
101 | */ | |
102 | outpw(FM_A(FM_MDREG1),FM_MINIT) ; | |
103 | outp(ADDR(B0_CTRL), CTRL_HPI_SET) ; | |
104 | hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ; | |
105 | /* | |
106 | * now reset everything | |
107 | */ | |
108 | outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */ | |
109 | i = (int) inp(ADDR(B0_CTRL)) ; /* do dummy read */ | |
110 | SK_UNUSED(i) ; /* Make LINT happy. */ | |
111 | outp(ADDR(B0_CTRL), CTRL_RST_CLR) ; | |
112 | ||
113 | /* | |
114 | * Reset all bits in the PCI STATUS register | |
115 | */ | |
116 | outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_ON) ; /* enable for writes */ | |
117 | word = inpw(PCI_C(PCI_STATUS)) ; | |
118 | outpw(PCI_C(PCI_STATUS), word | PCI_ERRBITS) ; | |
119 | outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_OFF) ; /* disable writes */ | |
120 | ||
121 | /* | |
122 | * Release the reset of all the State machines | |
123 | * Release Master_Reset | |
124 | * Release HPI_SM_Reset | |
125 | */ | |
126 | outp(ADDR(B0_CTRL), CTRL_MRST_CLR|CTRL_HPI_CLR) ; | |
127 | ||
128 | /* | |
129 | * determine the adapter type | |
130 | * Note: Do it here, because some drivers may call card_start() once | |
131 | * at very first before any other initialization functions is | |
132 | * executed. | |
133 | */ | |
134 | rev_id = inp(PCI_C(PCI_REV_ID)) ; | |
135 | if ((rev_id & 0xf0) == SK_ML_ID_1 || (rev_id & 0xf0) == SK_ML_ID_2) { | |
136 | smc->hw.hw_is_64bit = TRUE ; | |
137 | } else { | |
138 | smc->hw.hw_is_64bit = FALSE ; | |
139 | } | |
140 | ||
141 | /* | |
142 | * Watermark initialization | |
143 | */ | |
144 | if (!smc->hw.hw_is_64bit) { | |
145 | outpd(ADDR(B4_R1_F), RX_WATERMARK) ; | |
146 | outpd(ADDR(B5_XA_F), TX_WATERMARK) ; | |
147 | outpd(ADDR(B5_XS_F), TX_WATERMARK) ; | |
148 | } | |
149 | ||
150 | outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* clear the reset chips */ | |
151 | outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_ON|LED_GB_OFF) ; /* ye LED on */ | |
152 | ||
153 | /* init the timer value for the watch dog 2,5 minutes */ | |
154 | outpd(ADDR(B2_WDOG_INI),0x6FC23AC0) ; | |
155 | ||
156 | /* initialize the ISR mask */ | |
157 | smc->hw.is_imask = ISR_MASK ; | |
158 | smc->hw.hw_state = STOPPED ; | |
159 | #endif | |
160 | GET_PAGE(0) ; /* necessary for BOOT */ | |
161 | } | |
162 | ||
163 | void card_stop(struct s_smc *smc) | |
164 | { | |
165 | smt_stop_watchdog(smc) ; | |
166 | smc->hw.mac_ring_is_up = 0 ; /* ring down */ | |
af096046 | 167 | |
1da177e4 LT |
168 | #ifdef PCI |
169 | /* | |
170 | * make sure no transfer activity is pending | |
171 | */ | |
172 | outpw(FM_A(FM_MDREG1),FM_MINIT) ; | |
173 | outp(ADDR(B0_CTRL), CTRL_HPI_SET) ; | |
174 | hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ; | |
175 | /* | |
176 | * now reset everything | |
177 | */ | |
178 | outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */ | |
179 | outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* reset for all chips */ | |
180 | outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_OFF|LED_GB_OFF) ; /* all LEDs off */ | |
181 | smc->hw.hw_state = STOPPED ; | |
182 | #endif | |
183 | } | |
184 | /*--------------------------- ISR handling ----------------------------------*/ | |
185 | ||
186 | void mac1_irq(struct s_smc *smc, u_short stu, u_short stl) | |
187 | { | |
188 | int restart_tx = 0 ; | |
189 | again: | |
1da177e4 LT |
190 | |
191 | /* | |
192 | * parity error: note encoding error is not possible in tag mode | |
193 | */ | |
194 | if (stl & (FM_SPCEPDS | /* parity err. syn.q.*/ | |
195 | FM_SPCEPDA0 | /* parity err. a.q.0 */ | |
196 | FM_SPCEPDA1)) { /* parity err. a.q.1 */ | |
197 | SMT_PANIC(smc,SMT_E0134, SMT_E0134_MSG) ; | |
198 | } | |
199 | /* | |
200 | * buffer underrun: can only occur if a tx threshold is specified | |
201 | */ | |
202 | if (stl & (FM_STBURS | /* tx buffer underrun syn.q.*/ | |
203 | FM_STBURA0 | /* tx buffer underrun a.q.0 */ | |
204 | FM_STBURA1)) { /* tx buffer underrun a.q.2 */ | |
205 | SMT_PANIC(smc,SMT_E0133, SMT_E0133_MSG) ; | |
206 | } | |
207 | ||
208 | if ( (stu & (FM_SXMTABT | /* transmit abort */ | |
209 | FM_STXABRS | /* syn. tx abort */ | |
210 | FM_STXABRA0)) || /* asyn. tx abort */ | |
211 | (stl & (FM_SQLCKS | /* lock for syn. q. */ | |
212 | FM_SQLCKA0)) ) { /* lock for asyn. q. */ | |
213 | formac_tx_restart(smc) ; /* init tx */ | |
214 | restart_tx = 1 ; | |
215 | stu = inpw(FM_A(FM_ST1U)) ; | |
216 | stl = inpw(FM_A(FM_ST1L)) ; | |
217 | stu &= ~ (FM_STECFRMA0 | FM_STEFRMA0 | FM_STEFRMS) ; | |
218 | if (stu || stl) | |
219 | goto again ; | |
220 | } | |
221 | ||
222 | if (stu & (FM_STEFRMA0 | /* end of asyn tx */ | |
223 | FM_STEFRMS)) { /* end of sync tx */ | |
224 | restart_tx = 1 ; | |
225 | } | |
226 | ||
227 | if (restart_tx) | |
228 | llc_restart_tx(smc) ; | |
229 | } | |
af096046 | 230 | |
1da177e4 LT |
231 | /* |
232 | * interrupt source= plc1 | |
233 | * this function is called in nwfbisr.asm | |
234 | */ | |
235 | void plc1_irq(struct s_smc *smc) | |
236 | { | |
237 | u_short st = inpw(PLC(PB,PL_INTR_EVENT)) ; | |
238 | ||
1da177e4 LT |
239 | plc_irq(smc,PB,st) ; |
240 | } | |
241 | ||
242 | /* | |
243 | * interrupt source= plc2 | |
244 | * this function is called in nwfbisr.asm | |
245 | */ | |
246 | void plc2_irq(struct s_smc *smc) | |
247 | { | |
248 | u_short st = inpw(PLC(PA,PL_INTR_EVENT)) ; | |
249 | ||
1da177e4 LT |
250 | plc_irq(smc,PA,st) ; |
251 | } | |
252 | ||
253 | ||
254 | /* | |
255 | * interrupt source= timer | |
256 | */ | |
257 | void timer_irq(struct s_smc *smc) | |
258 | { | |
259 | hwt_restart(smc); | |
260 | smc->hw.t_stop = smc->hw.t_start; | |
261 | smt_timer_done(smc) ; | |
262 | } | |
263 | ||
264 | /* | |
265 | * return S-port (PA or PB) | |
266 | */ | |
267 | int pcm_get_s_port(struct s_smc *smc) | |
268 | { | |
269 | SK_UNUSED(smc) ; | |
270 | return(PS) ; | |
271 | } | |
272 | ||
273 | /* | |
274 | * Station Label = "FDDI-XYZ" where | |
275 | * | |
276 | * X = connector type | |
277 | * Y = PMD type | |
278 | * Z = port type | |
279 | */ | |
280 | #define STATION_LABEL_CONNECTOR_OFFSET 5 | |
281 | #define STATION_LABEL_PMD_OFFSET 6 | |
282 | #define STATION_LABEL_PORT_OFFSET 7 | |
283 | ||
284 | void read_address(struct s_smc *smc, u_char *mac_addr) | |
285 | { | |
286 | char ConnectorType ; | |
287 | char PmdType ; | |
288 | int i ; | |
289 | ||
1da177e4 LT |
290 | #ifdef PCI |
291 | for (i = 0; i < 6; i++) { /* read mac address from board */ | |
292 | smc->hw.fddi_phys_addr.a[i] = | |
bc63eb9c | 293 | bitrev8(inp(ADDR(B2_MAC_0+i))); |
1da177e4 LT |
294 | } |
295 | #endif | |
af096046 | 296 | |
1da177e4 LT |
297 | ConnectorType = inp(ADDR(B2_CONN_TYP)) ; |
298 | PmdType = inp(ADDR(B2_PMD_TYP)) ; | |
1da177e4 LT |
299 | |
300 | smc->y[PA].pmd_type[PMD_SK_CONN] = | |
301 | smc->y[PB].pmd_type[PMD_SK_CONN] = ConnectorType ; | |
302 | smc->y[PA].pmd_type[PMD_SK_PMD ] = | |
303 | smc->y[PB].pmd_type[PMD_SK_PMD ] = PmdType ; | |
304 | ||
305 | if (mac_addr) { | |
306 | for (i = 0; i < 6 ;i++) { | |
307 | smc->hw.fddi_canon_addr.a[i] = mac_addr[i] ; | |
bc63eb9c | 308 | smc->hw.fddi_home_addr.a[i] = bitrev8(mac_addr[i]); |
1da177e4 LT |
309 | } |
310 | return ; | |
311 | } | |
312 | smc->hw.fddi_home_addr = smc->hw.fddi_phys_addr ; | |
313 | ||
314 | for (i = 0; i < 6 ;i++) { | |
315 | smc->hw.fddi_canon_addr.a[i] = | |
bc63eb9c | 316 | bitrev8(smc->hw.fddi_phys_addr.a[i]); |
1da177e4 LT |
317 | } |
318 | } | |
319 | ||
320 | /* | |
321 | * FDDI card soft reset | |
322 | */ | |
323 | void init_board(struct s_smc *smc, u_char *mac_addr) | |
324 | { | |
325 | card_start(smc) ; | |
326 | read_address(smc,mac_addr) ; | |
327 | ||
1da177e4 | 328 | if (!(inp(ADDR(B0_DAS)) & DAS_AVAIL)) |
1da177e4 LT |
329 | smc->s.sas = SMT_SAS ; /* Single att. station */ |
330 | else | |
331 | smc->s.sas = SMT_DAS ; /* Dual att. station */ | |
332 | ||
1da177e4 | 333 | if (!(inp(ADDR(B0_DAS)) & DAS_BYP_ST)) |
1da177e4 LT |
334 | smc->mib.fddiSMTBypassPresent = 0 ; |
335 | /* without opt. bypass */ | |
336 | else | |
337 | smc->mib.fddiSMTBypassPresent = 1 ; | |
338 | /* with opt. bypass */ | |
339 | } | |
340 | ||
341 | /* | |
342 | * insert or deinsert optical bypass (called by ECM) | |
343 | */ | |
344 | void sm_pm_bypass_req(struct s_smc *smc, int mode) | |
345 | { | |
1da177e4 LT |
346 | DB_ECMN(1,"ECM : sm_pm_bypass_req(%s)\n",(mode == BP_INSERT) ? |
347 | "BP_INSERT" : "BP_DEINSERT",0) ; | |
348 | ||
349 | if (smc->s.sas != SMT_DAS) | |
350 | return ; | |
351 | ||
1da177e4 LT |
352 | #ifdef PCI |
353 | switch(mode) { | |
354 | case BP_INSERT : | |
355 | outp(ADDR(B0_DAS),DAS_BYP_INS) ; /* insert station */ | |
356 | break ; | |
357 | case BP_DEINSERT : | |
358 | outp(ADDR(B0_DAS),DAS_BYP_RMV) ; /* bypass station */ | |
359 | break ; | |
360 | } | |
361 | #endif | |
362 | } | |
363 | ||
364 | /* | |
365 | * check if bypass connected | |
366 | */ | |
367 | int sm_pm_bypass_present(struct s_smc *smc) | |
368 | { | |
1da177e4 | 369 | return( (inp(ADDR(B0_DAS)) & DAS_BYP_ST) ? TRUE: FALSE) ; |
1da177e4 LT |
370 | } |
371 | ||
372 | void plc_clear_irq(struct s_smc *smc, int p) | |
373 | { | |
374 | SK_UNUSED(p) ; | |
375 | ||
1da177e4 | 376 | SK_UNUSED(smc) ; |
1da177e4 LT |
377 | } |
378 | ||
379 | ||
380 | /* | |
381 | * led_indication called by rmt_indication() and | |
382 | * pcm_state_change() | |
383 | * | |
384 | * Input: | |
385 | * smc: SMT context | |
386 | * led_event: | |
387 | * 0 Only switch green LEDs according to their respective PCM state | |
388 | * LED_Y_OFF just switch yellow LED off | |
389 | * LED_Y_ON just switch yello LED on | |
390 | */ | |
7aa55fce | 391 | static void led_indication(struct s_smc *smc, int led_event) |
1da177e4 LT |
392 | { |
393 | /* use smc->hw.mac_ring_is_up == TRUE | |
394 | * as indication for Ring Operational | |
395 | */ | |
396 | u_short led_state ; | |
397 | struct s_phy *phy ; | |
398 | struct fddi_mib_p *mib_a ; | |
399 | struct fddi_mib_p *mib_b ; | |
400 | ||
401 | phy = &smc->y[PA] ; | |
402 | mib_a = phy->mib ; | |
403 | phy = &smc->y[PB] ; | |
404 | mib_b = phy->mib ; | |
405 | ||
1da177e4 LT |
406 | #ifdef PCI |
407 | led_state = 0 ; | |
408 | ||
409 | /* Ring up = yellow led OFF*/ | |
410 | if (led_event == LED_Y_ON) { | |
411 | led_state |= LED_MY_ON ; | |
412 | } | |
413 | else if (led_event == LED_Y_OFF) { | |
414 | led_state |= LED_MY_OFF ; | |
415 | } | |
416 | else { /* PCM state changed */ | |
417 | /* Link at Port A/S = green led A ON */ | |
418 | if (mib_a->fddiPORTPCMState == PC8_ACTIVE) { | |
419 | led_state |= LED_GA_ON ; | |
420 | } | |
421 | else { | |
422 | led_state |= LED_GA_OFF ; | |
423 | } | |
424 | ||
425 | /* Link at Port B = green led B ON */ | |
426 | if (mib_b->fddiPORTPCMState == PC8_ACTIVE) { | |
427 | led_state |= LED_GB_ON ; | |
428 | } | |
429 | else { | |
430 | led_state |= LED_GB_OFF ; | |
431 | } | |
432 | } | |
433 | ||
434 | outp(ADDR(B0_LED), led_state) ; | |
435 | #endif /* PCI */ | |
436 | ||
437 | } | |
438 | ||
439 | ||
440 | void pcm_state_change(struct s_smc *smc, int plc, int p_state) | |
441 | { | |
442 | /* | |
443 | * the current implementation of pcm_state_change() in the driver | |
444 | * parts must be renamed to drv_pcm_state_change() which will be called | |
445 | * now after led_indication. | |
446 | */ | |
447 | DRV_PCM_STATE_CHANGE(smc,plc,p_state) ; | |
448 | ||
449 | led_indication(smc,0) ; | |
450 | } | |
451 | ||
452 | ||
453 | void rmt_indication(struct s_smc *smc, int i) | |
454 | { | |
455 | /* Call a driver special function if defined */ | |
456 | DRV_RMT_INDICATION(smc,i) ; | |
457 | ||
458 | led_indication(smc, i ? LED_Y_OFF : LED_Y_ON) ; | |
459 | } | |
460 | ||
461 | ||
462 | /* | |
463 | * llc_recover_tx called by init_tx (fplus.c) | |
464 | */ | |
465 | void llc_recover_tx(struct s_smc *smc) | |
466 | { | |
467 | #ifdef LOAD_GEN | |
468 | extern int load_gen_flag ; | |
469 | ||
470 | load_gen_flag = 0 ; | |
471 | #endif | |
472 | #ifndef SYNC | |
473 | smc->hw.n_a_send= 0 ; | |
474 | #else | |
475 | SK_UNUSED(smc) ; | |
476 | #endif | |
477 | } | |
478 | ||
1da177e4 LT |
479 | #ifdef MULT_OEM |
480 | static int is_equal_num(char comp1[], char comp2[], int num) | |
481 | { | |
482 | int i ; | |
483 | ||
484 | for (i = 0 ; i < num ; i++) { | |
485 | if (comp1[i] != comp2[i]) | |
486 | return (0) ; | |
487 | } | |
488 | return (1) ; | |
489 | } /* is_equal_num */ | |
490 | ||
491 | ||
492 | /* | |
493 | * set the OEM ID defaults, and test the contents of the OEM data base | |
494 | * The default OEM is the first ACTIVE entry in the OEM data base | |
495 | * | |
496 | * returns: 0 success | |
497 | * 1 error in data base | |
498 | * 2 data base empty | |
499 | * 3 no active entry | |
500 | */ | |
501 | int set_oi_id_def(struct s_smc *smc) | |
502 | { | |
503 | int sel_id ; | |
504 | int i ; | |
505 | int act_entries ; | |
506 | ||
507 | i = 0 ; | |
508 | sel_id = -1 ; | |
509 | act_entries = FALSE ; | |
510 | smc->hw.oem_id = 0 ; | |
511 | smc->hw.oem_min_status = OI_STAT_ACTIVE ; | |
512 | ||
513 | /* check OEM data base */ | |
514 | while (oem_ids[i].oi_status) { | |
515 | switch (oem_ids[i].oi_status) { | |
516 | case OI_STAT_ACTIVE: | |
517 | act_entries = TRUE ; /* we have active IDs */ | |
518 | if (sel_id == -1) | |
519 | sel_id = i ; /* save the first active ID */ | |
520 | case OI_STAT_VALID: | |
521 | case OI_STAT_PRESENT: | |
522 | i++ ; | |
523 | break ; /* entry ok */ | |
524 | default: | |
525 | return (1) ; /* invalid oi_status */ | |
526 | } | |
527 | } | |
528 | ||
529 | if (i == 0) | |
530 | return (2) ; | |
531 | if (!act_entries) | |
532 | return (3) ; | |
533 | ||
534 | /* ok, we have a valid OEM data base with an active entry */ | |
535 | smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[sel_id] ; | |
536 | return (0) ; | |
537 | } | |
538 | #endif /* MULT_OEM */ | |
539 | ||
1da177e4 LT |
540 | void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr) |
541 | { | |
542 | int i ; | |
543 | ||
bc63eb9c AM |
544 | for (i = 0 ; i < 6 ; i++) |
545 | bia_addr->a[i] = bitrev8(smc->hw.fddi_phys_addr.a[i]); | |
1da177e4 LT |
546 | } |
547 | ||
548 | void smt_start_watchdog(struct s_smc *smc) | |
549 | { | |
550 | SK_UNUSED(smc) ; /* Make LINT happy. */ | |
551 | ||
552 | #ifndef DEBUG | |
553 | ||
554 | #ifdef PCI | |
555 | if (smc->hw.wdog_used) { | |
556 | outpw(ADDR(B2_WDOG_CRTL),TIM_START) ; /* Start timer. */ | |
557 | } | |
558 | #endif | |
559 | ||
560 | #endif /* DEBUG */ | |
561 | } | |
562 | ||
7aa55fce | 563 | static void smt_stop_watchdog(struct s_smc *smc) |
1da177e4 LT |
564 | { |
565 | SK_UNUSED(smc) ; /* Make LINT happy. */ | |
566 | #ifndef DEBUG | |
567 | ||
568 | #ifdef PCI | |
569 | if (smc->hw.wdog_used) { | |
570 | outpw(ADDR(B2_WDOG_CRTL),TIM_STOP) ; /* Stop timer. */ | |
571 | } | |
572 | #endif | |
573 | ||
574 | #endif /* DEBUG */ | |
575 | } | |
576 | ||
577 | #ifdef PCI | |
1da177e4 LT |
578 | |
579 | void mac_do_pci_fix(struct s_smc *smc) | |
580 | { | |
581 | SK_UNUSED(smc) ; | |
582 | } | |
583 | #endif /* PCI */ | |
584 |