ethtool: Use full 32 bit speed range in ethtool's set_settings
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / net / mii.c
CommitLineData
1da177e4
LT
1/*
2
3 mii.c: MII interface library
4
5 Maintained by Jeff Garzik <jgarzik@pobox.com>
6 Copyright 2001,2002 Jeff Garzik
7
8 Various code came from myson803.c and other files by
9 Donald Becker. Copyright:
10
11 Written 1998-2002 by Donald Becker.
12
13 This software may be used and distributed according
14 to the terms of the GNU General Public License (GPL),
15 incorporated herein by reference. Drivers based on
16 or derived from this code fall under the GPL and must
17 retain the authorship, copyright and license notice.
18 This file is not a complete program and may only be
19 used when the entire operating system is licensed
20 under the GPL.
21
22 The author may be reached as becker@scyld.com, or C/O
23 Scyld Computing Corporation
24 410 Severn Ave., Suite 210
25 Annapolis MD 21403
26
27
28 */
29
30#include <linux/kernel.h>
31#include <linux/module.h>
32#include <linux/netdevice.h>
33#include <linux/ethtool.h>
5974700c
BH
34#include <linux/mdio.h>
35
36static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
37{
38 u32 result = 0;
39 int advert;
40
41 advert = mii->mdio_read(mii->dev, mii->phy_id, addr);
42 if (advert & LPA_LPACK)
43 result |= ADVERTISED_Autoneg;
44 if (advert & ADVERTISE_10HALF)
45 result |= ADVERTISED_10baseT_Half;
46 if (advert & ADVERTISE_10FULL)
47 result |= ADVERTISED_10baseT_Full;
48 if (advert & ADVERTISE_100HALF)
49 result |= ADVERTISED_100baseT_Half;
50 if (advert & ADVERTISE_100FULL)
51 result |= ADVERTISED_100baseT_Full;
52
53 return result;
54}
1da177e4 55
32684ec6
RD
56/**
57 * mii_ethtool_gset - get settings that are specified in @ecmd
58 * @mii: MII interface
59 * @ecmd: requested ethtool_cmd
60 *
8ae6daca
DD
61 * The @ecmd parameter is expected to have been cleared before calling
62 * mii_ethtool_gset().
63 *
32684ec6
RD
64 * Returns 0 for success, negative on error.
65 */
1da177e4
LT
66int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
67{
68 struct net_device *dev = mii->dev;
5974700c
BH
69 u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;
70 u32 nego;
1da177e4
LT
71
72 ecmd->supported =
73 (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
74 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
75 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
76 if (mii->supports_gmii)
77 ecmd->supported |= SUPPORTED_1000baseT_Half |
78 SUPPORTED_1000baseT_Full;
79
80 /* only supports twisted-pair */
81 ecmd->port = PORT_MII;
82
83 /* only supports internal transceiver */
84 ecmd->transceiver = XCVR_INTERNAL;
85
86 /* this isn't fully supported at higher layers */
87 ecmd->phy_address = mii->phy_id;
5974700c 88 ecmd->mdio_support = MDIO_SUPPORTS_C22;
1da177e4
LT
89
90 ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
1da177e4
LT
91
92 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
5974700c 93 bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);
1da177e4 94 if (mii->supports_gmii) {
5974700c
BH
95 ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
96 stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
1da177e4
LT
97 }
98 if (bmcr & BMCR_ANENABLE) {
99 ecmd->advertising |= ADVERTISED_Autoneg;
100 ecmd->autoneg = AUTONEG_ENABLE;
6aa20a22 101
5974700c
BH
102 ecmd->advertising |= mii_get_an(mii, MII_ADVERTISE);
103 if (ctrl1000 & ADVERTISE_1000HALF)
104 ecmd->advertising |= ADVERTISED_1000baseT_Half;
105 if (ctrl1000 & ADVERTISE_1000FULL)
106 ecmd->advertising |= ADVERTISED_1000baseT_Full;
107
108 if (bmsr & BMSR_ANEGCOMPLETE) {
109 ecmd->lp_advertising = mii_get_an(mii, MII_LPA);
110 if (stat1000 & LPA_1000HALF)
111 ecmd->lp_advertising |=
112 ADVERTISED_1000baseT_Half;
113 if (stat1000 & LPA_1000FULL)
114 ecmd->lp_advertising |=
115 ADVERTISED_1000baseT_Full;
116 } else {
117 ecmd->lp_advertising = 0;
118 }
119
120 nego = ecmd->advertising & ecmd->lp_advertising;
121
122 if (nego & (ADVERTISED_1000baseT_Full |
123 ADVERTISED_1000baseT_Half)) {
1da177e4 124 ecmd->speed = SPEED_1000;
5974700c
BH
125 ecmd->duplex = !!(nego & ADVERTISED_1000baseT_Full);
126 } else if (nego & (ADVERTISED_100baseT_Full |
127 ADVERTISED_100baseT_Half)) {
1da177e4 128 ecmd->speed = SPEED_100;
5974700c 129 ecmd->duplex = !!(nego & ADVERTISED_100baseT_Full);
1da177e4 130 } else {
5974700c
BH
131 ecmd->speed = SPEED_10;
132 ecmd->duplex = !!(nego & ADVERTISED_10baseT_Full);
1da177e4
LT
133 }
134 } else {
135 ecmd->autoneg = AUTONEG_DISABLE;
136
6aa20a22 137 ecmd->speed = ((bmcr & BMCR_SPEED1000 &&
1da177e4
LT
138 (bmcr & BMCR_SPEED100) == 0) ? SPEED_1000 :
139 (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10);
140 ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
141 }
142
5974700c
BH
143 mii->full_duplex = ecmd->duplex;
144
1da177e4
LT
145 /* ignore maxtxpkt, maxrxpkt for now */
146
147 return 0;
148}
149
32684ec6
RD
150/**
151 * mii_ethtool_sset - set settings that are specified in @ecmd
152 * @mii: MII interface
153 * @ecmd: requested ethtool_cmd
154 *
155 * Returns 0 for success, negative on error.
156 */
1da177e4
LT
157int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
158{
159 struct net_device *dev = mii->dev;
25db0338 160 u32 speed = ethtool_cmd_speed(ecmd);
1da177e4 161
25db0338
DD
162 if (speed != SPEED_10 &&
163 speed != SPEED_100 &&
164 speed != SPEED_1000)
1da177e4
LT
165 return -EINVAL;
166 if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
167 return -EINVAL;
168 if (ecmd->port != PORT_MII)
169 return -EINVAL;
170 if (ecmd->transceiver != XCVR_INTERNAL)
171 return -EINVAL;
172 if (ecmd->phy_address != mii->phy_id)
173 return -EINVAL;
174 if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
175 return -EINVAL;
25db0338 176 if ((speed == SPEED_1000) && (!mii->supports_gmii))
1da177e4 177 return -EINVAL;
6aa20a22 178
1da177e4 179 /* ignore supported, maxtxpkt, maxrxpkt */
6aa20a22 180
1da177e4
LT
181 if (ecmd->autoneg == AUTONEG_ENABLE) {
182 u32 bmcr, advert, tmp;
183 u32 advert2 = 0, tmp2 = 0;
184
185 if ((ecmd->advertising & (ADVERTISED_10baseT_Half |
186 ADVERTISED_10baseT_Full |
187 ADVERTISED_100baseT_Half |
188 ADVERTISED_100baseT_Full |
189 ADVERTISED_1000baseT_Half |
190 ADVERTISED_1000baseT_Full)) == 0)
191 return -EINVAL;
192
193 /* advertise only what has been requested */
194 advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
195 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
196 if (mii->supports_gmii) {
197 advert2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
198 tmp2 = advert2 & ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
199 }
200 if (ecmd->advertising & ADVERTISED_10baseT_Half)
201 tmp |= ADVERTISE_10HALF;
202 if (ecmd->advertising & ADVERTISED_10baseT_Full)
203 tmp |= ADVERTISE_10FULL;
204 if (ecmd->advertising & ADVERTISED_100baseT_Half)
205 tmp |= ADVERTISE_100HALF;
206 if (ecmd->advertising & ADVERTISED_100baseT_Full)
207 tmp |= ADVERTISE_100FULL;
208 if (mii->supports_gmii) {
209 if (ecmd->advertising & ADVERTISED_1000baseT_Half)
210 tmp2 |= ADVERTISE_1000HALF;
211 if (ecmd->advertising & ADVERTISED_1000baseT_Full)
212 tmp2 |= ADVERTISE_1000FULL;
213 }
214 if (advert != tmp) {
215 mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
216 mii->advertising = tmp;
217 }
218 if ((mii->supports_gmii) && (advert2 != tmp2))
219 mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2);
6aa20a22 220
1da177e4
LT
221 /* turn on autonegotiation, and force a renegotiate */
222 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
223 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
224 mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);
225
226 mii->force_media = 0;
227 } else {
228 u32 bmcr, tmp;
229
230 /* turn off auto negotiation, set speed and duplexity */
231 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
6aa20a22 232 tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
1da177e4 233 BMCR_SPEED1000 | BMCR_FULLDPLX);
25db0338 234 if (speed == SPEED_1000)
1da177e4 235 tmp |= BMCR_SPEED1000;
25db0338 236 else if (speed == SPEED_100)
1da177e4
LT
237 tmp |= BMCR_SPEED100;
238 if (ecmd->duplex == DUPLEX_FULL) {
239 tmp |= BMCR_FULLDPLX;
240 mii->full_duplex = 1;
241 } else
242 mii->full_duplex = 0;
243 if (bmcr != tmp)
244 mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp);
245
246 mii->force_media = 1;
247 }
248 return 0;
249}
250
32684ec6
RD
251/**
252 * mii_check_gmii_support - check if the MII supports Gb interfaces
253 * @mii: the MII interface
254 */
43ec6e95
DF
255int mii_check_gmii_support(struct mii_if_info *mii)
256{
257 int reg;
258
259 reg = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
260 if (reg & BMSR_ESTATEN) {
261 reg = mii->mdio_read(mii->dev, mii->phy_id, MII_ESTATUS);
262 if (reg & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))
263 return 1;
264 }
265
266 return 0;
267}
268
32684ec6
RD
269/**
270 * mii_link_ok - is link status up/ok
271 * @mii: the MII interface
272 *
273 * Returns 1 if the MII reports link status up/ok, 0 otherwise.
274 */
1da177e4
LT
275int mii_link_ok (struct mii_if_info *mii)
276{
277 /* first, a dummy read, needed to latch some MII phys */
278 mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
279 if (mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR) & BMSR_LSTATUS)
280 return 1;
281 return 0;
282}
283
32684ec6
RD
284/**
285 * mii_nway_restart - restart NWay (autonegotiation) for this interface
286 * @mii: the MII interface
287 *
288 * Returns 0 on success, negative on error.
289 */
1da177e4
LT
290int mii_nway_restart (struct mii_if_info *mii)
291{
292 int bmcr;
293 int r = -EINVAL;
294
295 /* if autoneg is off, it's an error */
296 bmcr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMCR);
297
298 if (bmcr & BMCR_ANENABLE) {
299 bmcr |= BMCR_ANRESTART;
300 mii->mdio_write(mii->dev, mii->phy_id, MII_BMCR, bmcr);
301 r = 0;
302 }
303
304 return r;
305}
306
32684ec6
RD
307/**
308 * mii_check_link - check MII link status
309 * @mii: MII interface
310 *
311 * If the link status changed (previous != current), call
312 * netif_carrier_on() if current link status is Up or call
313 * netif_carrier_off() if current link status is Down.
314 */
1da177e4
LT
315void mii_check_link (struct mii_if_info *mii)
316{
317 int cur_link = mii_link_ok(mii);
318 int prev_link = netif_carrier_ok(mii->dev);
319
320 if (cur_link && !prev_link)
321 netif_carrier_on(mii->dev);
322 else if (prev_link && !cur_link)
323 netif_carrier_off(mii->dev);
324}
325
32684ec6
RD
326/**
327 * mii_check_media - check the MII interface for a duplex change
328 * @mii: the MII interface
329 * @ok_to_print: OK to print link up/down messages
330 * @init_media: OK to save duplex mode in @mii
331 *
332 * Returns 1 if the duplex mode changed, 0 if not.
333 * If the media type is forced, always returns 0.
334 */
1da177e4
LT
335unsigned int mii_check_media (struct mii_if_info *mii,
336 unsigned int ok_to_print,
337 unsigned int init_media)
338{
339 unsigned int old_carrier, new_carrier;
340 int advertise, lpa, media, duplex;
341 int lpa2 = 0;
342
343 /* if forced media, go no further */
344 if (mii->force_media)
345 return 0; /* duplex did not change */
346
347 /* check current and old link status */
348 old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;
349 new_carrier = (unsigned int) mii_link_ok(mii);
350
351 /* if carrier state did not change, this is a "bounce",
352 * just exit as everything is already set correctly
353 */
354 if ((!init_media) && (old_carrier == new_carrier))
355 return 0; /* duplex did not change */
356
357 /* no carrier, nothing much to do */
358 if (!new_carrier) {
359 netif_carrier_off(mii->dev);
360 if (ok_to_print)
967faf3b 361 netdev_info(mii->dev, "link down\n");
1da177e4
LT
362 return 0; /* duplex did not change */
363 }
364
365 /*
366 * we have carrier, see who's on the other end
367 */
368 netif_carrier_on(mii->dev);
369
370 /* get MII advertise and LPA values */
371 if ((!init_media) && (mii->advertising))
372 advertise = mii->advertising;
373 else {
374 advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);
375 mii->advertising = advertise;
376 }
377 lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);
378 if (mii->supports_gmii)
379 lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000);
380
381 /* figure out media and duplex from advertise and LPA values */
382 media = mii_nway_result(lpa & advertise);
383 duplex = (media & ADVERTISE_FULL) ? 1 : 0;
384 if (lpa2 & LPA_1000FULL)
385 duplex = 1;
386
387 if (ok_to_print)
967faf3b
JP
388 netdev_info(mii->dev, "link up, %uMbps, %s-duplex, lpa 0x%04X\n",
389 lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 :
390 media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ?
391 100 : 10,
392 duplex ? "full" : "half",
393 lpa);
1da177e4
LT
394
395 if ((init_media) || (mii->full_duplex != duplex)) {
396 mii->full_duplex = duplex;
397 return 1; /* duplex changed */
398 }
399
400 return 0; /* duplex did not change */
401}
402
32684ec6
RD
403/**
404 * generic_mii_ioctl - main MII ioctl interface
405 * @mii_if: the MII interface
406 * @mii_data: MII ioctl data structure
407 * @cmd: MII ioctl command
408 * @duplex_chg_out: pointer to @duplex_changed status if there was no
409 * ioctl error
410 *
411 * Returns 0 on success, negative on error.
412 */
1da177e4
LT
413int generic_mii_ioctl(struct mii_if_info *mii_if,
414 struct mii_ioctl_data *mii_data, int cmd,
415 unsigned int *duplex_chg_out)
416{
417 int rc = 0;
418 unsigned int duplex_changed = 0;
419
420 if (duplex_chg_out)
421 *duplex_chg_out = 0;
422
423 mii_data->phy_id &= mii_if->phy_id_mask;
424 mii_data->reg_num &= mii_if->reg_num_mask;
425
426 switch(cmd) {
427 case SIOCGMIIPHY:
428 mii_data->phy_id = mii_if->phy_id;
429 /* fall through */
430
431 case SIOCGMIIREG:
432 mii_data->val_out =
433 mii_if->mdio_read(mii_if->dev, mii_data->phy_id,
434 mii_data->reg_num);
435 break;
436
437 case SIOCSMIIREG: {
438 u16 val = mii_data->val_in;
439
1da177e4
LT
440 if (mii_data->phy_id == mii_if->phy_id) {
441 switch(mii_data->reg_num) {
442 case MII_BMCR: {
443 unsigned int new_duplex = 0;
444 if (val & (BMCR_RESET|BMCR_ANENABLE))
445 mii_if->force_media = 0;
446 else
447 mii_if->force_media = 1;
448 if (mii_if->force_media &&
449 (val & BMCR_FULLDPLX))
450 new_duplex = 1;
451 if (mii_if->full_duplex != new_duplex) {
452 duplex_changed = 1;
453 mii_if->full_duplex = new_duplex;
454 }
455 break;
456 }
457 case MII_ADVERTISE:
458 mii_if->advertising = val;
459 break;
460 default:
461 /* do nothing */
462 break;
463 }
464 }
465
466 mii_if->mdio_write(mii_if->dev, mii_data->phy_id,
467 mii_data->reg_num, val);
468 break;
469 }
470
471 default:
472 rc = -EOPNOTSUPP;
473 break;
474 }
475
476 if ((rc == 0) && (duplex_chg_out) && (duplex_changed))
477 *duplex_chg_out = 1;
478
479 return rc;
480}
481
482MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
483MODULE_DESCRIPTION ("MII hardware support library");
484MODULE_LICENSE("GPL");
485
486EXPORT_SYMBOL(mii_link_ok);
487EXPORT_SYMBOL(mii_nway_restart);
488EXPORT_SYMBOL(mii_ethtool_gset);
489EXPORT_SYMBOL(mii_ethtool_sset);
490EXPORT_SYMBOL(mii_check_link);
491EXPORT_SYMBOL(mii_check_media);
43ec6e95 492EXPORT_SYMBOL(mii_check_gmii_support);
1da177e4
LT
493EXPORT_SYMBOL(generic_mii_ioctl);
494