Commit | Line | Data |
---|---|---|
8199d3a7 CL |
1 | /***************************************************************************** |
2 | * * | |
3 | * File: subr.c * | |
559fb51b SB |
4 | * $Revision: 1.27 $ * |
5 | * $Date: 2005/06/22 01:08:36 $ * | |
8199d3a7 CL |
6 | * Description: * |
7 | * Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. * | |
8 | * part of the Chelsio 10Gb Ethernet Driver. * | |
9 | * * | |
10 | * This program is free software; you can redistribute it and/or modify * | |
11 | * it under the terms of the GNU General Public License, version 2, as * | |
12 | * published by the Free Software Foundation. * | |
13 | * * | |
14 | * You should have received a copy of the GNU General Public License along * | |
15 | * with this program; if not, write to the Free Software Foundation, Inc., * | |
16 | * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * | |
17 | * * | |
18 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * | |
19 | * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * | |
20 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * | |
21 | * * | |
22 | * http://www.chelsio.com * | |
23 | * * | |
24 | * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * | |
25 | * All rights reserved. * | |
26 | * * | |
27 | * Maintainers: maintainers@chelsio.com * | |
28 | * * | |
29 | * Authors: Dimitrios Michailidis <dm@chelsio.com> * | |
30 | * Tina Yang <tainay@chelsio.com> * | |
31 | * Felix Marti <felix@chelsio.com> * | |
32 | * Scott Bardone <sbardone@chelsio.com> * | |
33 | * Kurt Ottaway <kottaway@chelsio.com> * | |
34 | * Frank DiMambro <frank@chelsio.com> * | |
35 | * * | |
36 | * History: * | |
37 | * * | |
38 | ****************************************************************************/ | |
39 | ||
40 | #include "common.h" | |
41 | #include "elmer0.h" | |
42 | #include "regs.h" | |
8199d3a7 CL |
43 | #include "gmac.h" |
44 | #include "cphy.h" | |
45 | #include "sge.h" | |
f1d3d38a | 46 | #include "tp.h" |
8199d3a7 CL |
47 | #include "espi.h" |
48 | ||
49 | /** | |
50 | * t1_wait_op_done - wait until an operation is completed | |
51 | * @adapter: the adapter performing the operation | |
52 | * @reg: the register to check for completion | |
53 | * @mask: a single-bit field within @reg that indicates completion | |
54 | * @polarity: the value of the field when the operation is completed | |
55 | * @attempts: number of check iterations | |
56 | * @delay: delay in usecs between iterations | |
57 | * | |
58 | * Wait until an operation is completed by checking a bit in a register | |
59 | * up to @attempts times. Returns %0 if the operation completes and %1 | |
60 | * otherwise. | |
61 | */ | |
62 | static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity, | |
f1d3d38a | 63 | int attempts, int delay) |
8199d3a7 CL |
64 | { |
65 | while (1) { | |
559fb51b | 66 | u32 val = readl(adapter->regs + reg) & mask; |
8199d3a7 CL |
67 | |
68 | if (!!val == polarity) | |
69 | return 0; | |
70 | if (--attempts == 0) | |
71 | return 1; | |
72 | if (delay) | |
73 | udelay(delay); | |
74 | } | |
75 | } | |
76 | ||
77 | #define TPI_ATTEMPTS 50 | |
78 | ||
79 | /* | |
80 | * Write a register over the TPI interface (unlocked and locked versions). | |
81 | */ | |
f1d3d38a | 82 | int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) |
8199d3a7 CL |
83 | { |
84 | int tpi_busy; | |
85 | ||
559fb51b SB |
86 | writel(addr, adapter->regs + A_TPI_ADDR); |
87 | writel(value, adapter->regs + A_TPI_WR_DATA); | |
88 | writel(F_TPIWR, adapter->regs + A_TPI_CSR); | |
8199d3a7 CL |
89 | |
90 | tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, | |
91 | TPI_ATTEMPTS, 3); | |
92 | if (tpi_busy) | |
93 | CH_ALERT("%s: TPI write to 0x%x failed\n", | |
94 | adapter->name, addr); | |
95 | return tpi_busy; | |
96 | } | |
97 | ||
98 | int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) | |
99 | { | |
100 | int ret; | |
101 | ||
f1d3d38a | 102 | spin_lock(&adapter->tpi_lock); |
8199d3a7 | 103 | ret = __t1_tpi_write(adapter, addr, value); |
f1d3d38a | 104 | spin_unlock(&adapter->tpi_lock); |
8199d3a7 CL |
105 | return ret; |
106 | } | |
107 | ||
108 | /* | |
109 | * Read a register over the TPI interface (unlocked and locked versions). | |
110 | */ | |
f1d3d38a | 111 | int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) |
8199d3a7 CL |
112 | { |
113 | int tpi_busy; | |
114 | ||
559fb51b SB |
115 | writel(addr, adapter->regs + A_TPI_ADDR); |
116 | writel(0, adapter->regs + A_TPI_CSR); | |
8199d3a7 CL |
117 | |
118 | tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, | |
119 | TPI_ATTEMPTS, 3); | |
120 | if (tpi_busy) | |
121 | CH_ALERT("%s: TPI read from 0x%x failed\n", | |
122 | adapter->name, addr); | |
123 | else | |
559fb51b | 124 | *valp = readl(adapter->regs + A_TPI_RD_DATA); |
8199d3a7 CL |
125 | return tpi_busy; |
126 | } | |
127 | ||
128 | int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) | |
129 | { | |
130 | int ret; | |
131 | ||
f1d3d38a | 132 | spin_lock(&adapter->tpi_lock); |
8199d3a7 | 133 | ret = __t1_tpi_read(adapter, addr, valp); |
f1d3d38a | 134 | spin_unlock(&adapter->tpi_lock); |
8199d3a7 CL |
135 | return ret; |
136 | } | |
137 | ||
f1d3d38a SH |
138 | /* |
139 | * Set a TPI parameter. | |
140 | */ | |
141 | static void t1_tpi_par(adapter_t *adapter, u32 value) | |
142 | { | |
143 | writel(V_TPIPAR(value), adapter->regs + A_TPI_PAR); | |
144 | } | |
145 | ||
8199d3a7 CL |
146 | /* |
147 | * Called when a port's link settings change to propagate the new values to the | |
148 | * associated PHY and MAC. After performing the common tasks it invokes an | |
149 | * OS-specific handler. | |
150 | */ | |
f1d3d38a | 151 | void t1_link_changed(adapter_t *adapter, int port_id) |
8199d3a7 CL |
152 | { |
153 | int link_ok, speed, duplex, fc; | |
154 | struct cphy *phy = adapter->port[port_id].phy; | |
155 | struct link_config *lc = &adapter->port[port_id].link_config; | |
156 | ||
157 | phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); | |
158 | ||
159 | lc->speed = speed < 0 ? SPEED_INVALID : speed; | |
160 | lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex; | |
161 | if (!(lc->requested_fc & PAUSE_AUTONEG)) | |
162 | fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); | |
163 | ||
164 | if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) { | |
165 | /* Set MAC speed, duplex, and flow control to match PHY. */ | |
166 | struct cmac *mac = adapter->port[port_id].mac; | |
167 | ||
168 | mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc); | |
169 | lc->fc = (unsigned char)fc; | |
170 | } | |
f1d3d38a | 171 | t1_link_negotiated(adapter, port_id, link_ok, speed, duplex, fc); |
8199d3a7 CL |
172 | } |
173 | ||
174 | static int t1_pci_intr_handler(adapter_t *adapter) | |
175 | { | |
176 | u32 pcix_cause; | |
177 | ||
11e5a202 | 178 | pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause); |
8199d3a7 CL |
179 | |
180 | if (pcix_cause) { | |
181 | pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, | |
11e5a202 | 182 | pcix_cause); |
8199d3a7 CL |
183 | t1_fatal_err(adapter); /* PCI errors are fatal */ |
184 | } | |
185 | return 0; | |
186 | } | |
187 | ||
352c417d SH |
188 | #ifdef CONFIG_CHELSIO_T1_COUGAR |
189 | #include "cspi.h" | |
190 | #endif | |
191 | #ifdef CONFIG_CHELSIO_T1_1G | |
192 | #include "fpga_defs.h" | |
193 | ||
194 | /* | |
195 | * PHY interrupt handler for FPGA boards. | |
196 | */ | |
197 | static int fpga_phy_intr_handler(adapter_t *adapter) | |
198 | { | |
199 | int p; | |
200 | u32 cause = readl(adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE); | |
201 | ||
202 | for_each_port(adapter, p) | |
203 | if (cause & (1 << p)) { | |
204 | struct cphy *phy = adapter->port[p].phy; | |
205 | int phy_cause = phy->ops->interrupt_handler(phy); | |
206 | ||
207 | if (phy_cause & cphy_cause_link_change) | |
208 | t1_link_changed(adapter, p); | |
209 | } | |
210 | writel(cause, adapter->regs + FPGA_GMAC_ADDR_INTERRUPT_CAUSE); | |
211 | return 0; | |
212 | } | |
213 | ||
214 | /* | |
215 | * Slow path interrupt handler for FPGAs. | |
216 | */ | |
217 | static int fpga_slow_intr(adapter_t *adapter) | |
218 | { | |
219 | u32 cause = readl(adapter->regs + A_PL_CAUSE); | |
220 | ||
221 | cause &= ~F_PL_INTR_SGE_DATA; | |
222 | if (cause & F_PL_INTR_SGE_ERR) | |
223 | t1_sge_intr_error_handler(adapter->sge); | |
224 | ||
225 | if (cause & FPGA_PCIX_INTERRUPT_GMAC) | |
356bd146 | 226 | fpga_phy_intr_handler(adapter); |
352c417d SH |
227 | |
228 | if (cause & FPGA_PCIX_INTERRUPT_TP) { | |
356bd146 | 229 | /* |
352c417d SH |
230 | * FPGA doesn't support MC4 interrupts and it requires |
231 | * this odd layer of indirection for MC5. | |
356bd146 | 232 | */ |
352c417d SH |
233 | u32 tp_cause = readl(adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE); |
234 | ||
235 | /* Clear TP interrupt */ | |
236 | writel(tp_cause, adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE); | |
237 | } | |
238 | if (cause & FPGA_PCIX_INTERRUPT_PCIX) | |
239 | t1_pci_intr_handler(adapter); | |
240 | ||
241 | /* Clear the interrupts just processed. */ | |
242 | if (cause) | |
243 | writel(cause, adapter->regs + A_PL_CAUSE); | |
244 | ||
245 | return cause != 0; | |
246 | } | |
247 | #endif | |
8199d3a7 CL |
248 | |
249 | /* | |
250 | * Wait until Elmer's MI1 interface is ready for new operations. | |
251 | */ | |
252 | static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg) | |
253 | { | |
254 | int attempts = 100, busy; | |
255 | ||
256 | do { | |
257 | u32 val; | |
258 | ||
259 | __t1_tpi_read(adapter, mi1_reg, &val); | |
260 | busy = val & F_MI1_OP_BUSY; | |
261 | if (busy) | |
262 | udelay(10); | |
263 | } while (busy && --attempts); | |
264 | if (busy) | |
356bd146 | 265 | CH_ALERT("%s: MDIO operation timed out\n", adapter->name); |
8199d3a7 CL |
266 | return busy; |
267 | } | |
268 | ||
269 | /* | |
270 | * MI1 MDIO initialization. | |
271 | */ | |
272 | static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi) | |
273 | { | |
274 | u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1; | |
275 | u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) | | |
276 | V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv); | |
277 | ||
278 | if (!(bi->caps & SUPPORTED_10000baseT_Full)) | |
279 | val |= V_MI1_SOF(1); | |
280 | t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val); | |
281 | } | |
282 | ||
352c417d SH |
283 | #if defined(CONFIG_CHELSIO_T1_1G) || defined(CONFIG_CHELSIO_T1_COUGAR) |
284 | /* | |
285 | * Elmer MI1 MDIO read/write operations. | |
286 | */ | |
23c3320c BH |
287 | static int mi1_mdio_read(struct net_device *dev, int phy_addr, int mmd_addr, |
288 | u16 reg_addr) | |
352c417d | 289 | { |
23c3320c | 290 | struct adapter *adapter = dev->ml_priv; |
352c417d | 291 | u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr); |
23c3320c | 292 | unsigned int val; |
352c417d SH |
293 | |
294 | spin_lock(&adapter->tpi_lock); | |
295 | __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); | |
296 | __t1_tpi_write(adapter, | |
297 | A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_READ); | |
298 | mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); | |
23c3320c | 299 | __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, &val); |
352c417d | 300 | spin_unlock(&adapter->tpi_lock); |
23c3320c | 301 | return val; |
352c417d SH |
302 | } |
303 | ||
23c3320c BH |
304 | static int mi1_mdio_write(struct net_device *dev, int phy_addr, int mmd_addr, |
305 | u16 reg_addr, u16 val) | |
352c417d | 306 | { |
23c3320c | 307 | struct adapter *adapter = dev->ml_priv; |
352c417d SH |
308 | u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr); |
309 | ||
352c417d SH |
310 | spin_lock(&adapter->tpi_lock); |
311 | __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); | |
312 | __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val); | |
313 | __t1_tpi_write(adapter, | |
314 | A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_WRITE); | |
315 | mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); | |
316 | spin_unlock(&adapter->tpi_lock); | |
317 | return 0; | |
318 | } | |
319 | ||
320 | #if defined(CONFIG_CHELSIO_T1_1G) || defined(CONFIG_CHELSIO_T1_COUGAR) | |
459e536b | 321 | static const struct mdio_ops mi1_mdio_ops = { |
4c247db1 SH |
322 | .init = mi1_mdio_init, |
323 | .read = mi1_mdio_read, | |
23c3320c BH |
324 | .write = mi1_mdio_write, |
325 | .mode_support = MDIO_SUPPORTS_C22 | |
352c417d SH |
326 | }; |
327 | #endif | |
328 | ||
329 | #endif | |
330 | ||
23c3320c BH |
331 | static int mi1_mdio_ext_read(struct net_device *dev, int phy_addr, int mmd_addr, |
332 | u16 reg_addr) | |
8199d3a7 | 333 | { |
23c3320c | 334 | struct adapter *adapter = dev->ml_priv; |
8199d3a7 | 335 | u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); |
23c3320c | 336 | unsigned int val; |
8199d3a7 | 337 | |
f1d3d38a | 338 | spin_lock(&adapter->tpi_lock); |
8199d3a7 CL |
339 | |
340 | /* Write the address we want. */ | |
341 | __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); | |
342 | __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr); | |
343 | __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, | |
344 | MI1_OP_INDIRECT_ADDRESS); | |
345 | mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); | |
346 | ||
347 | /* Write the operation we want. */ | |
f1d3d38a SH |
348 | __t1_tpi_write(adapter, |
349 | A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ); | |
8199d3a7 CL |
350 | mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); |
351 | ||
352 | /* Read the data. */ | |
23c3320c | 353 | __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, &val); |
f1d3d38a | 354 | spin_unlock(&adapter->tpi_lock); |
23c3320c | 355 | return val; |
8199d3a7 CL |
356 | } |
357 | ||
23c3320c BH |
358 | static int mi1_mdio_ext_write(struct net_device *dev, int phy_addr, |
359 | int mmd_addr, u16 reg_addr, u16 val) | |
8199d3a7 | 360 | { |
23c3320c | 361 | struct adapter *adapter = dev->ml_priv; |
8199d3a7 CL |
362 | u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); |
363 | ||
f1d3d38a | 364 | spin_lock(&adapter->tpi_lock); |
8199d3a7 CL |
365 | |
366 | /* Write the address we want. */ | |
367 | __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); | |
368 | __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr); | |
369 | __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, | |
370 | MI1_OP_INDIRECT_ADDRESS); | |
371 | mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); | |
372 | ||
373 | /* Write the data. */ | |
374 | __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val); | |
375 | __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE); | |
376 | mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); | |
f1d3d38a | 377 | spin_unlock(&adapter->tpi_lock); |
8199d3a7 CL |
378 | return 0; |
379 | } | |
380 | ||
459e536b | 381 | static const struct mdio_ops mi1_mdio_ext_ops = { |
4c247db1 SH |
382 | .init = mi1_mdio_init, |
383 | .read = mi1_mdio_ext_read, | |
23c3320c BH |
384 | .write = mi1_mdio_ext_write, |
385 | .mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22 | |
8199d3a7 CL |
386 | }; |
387 | ||
388 | enum { | |
f1d3d38a | 389 | CH_BRD_T110_1CU, |
8199d3a7 CL |
390 | CH_BRD_N110_1F, |
391 | CH_BRD_N210_1F, | |
f1d3d38a SH |
392 | CH_BRD_T210_1F, |
393 | CH_BRD_T210_1CU, | |
394 | CH_BRD_N204_4CU, | |
8199d3a7 CL |
395 | }; |
396 | ||
4c247db1 SH |
397 | static const struct board_info t1_board[] = { |
398 | { | |
399 | .board = CHBT_BOARD_CHT110, | |
400 | .port_number = 1, | |
401 | .caps = SUPPORTED_10000baseT_Full, | |
402 | .chip_term = CHBT_TERM_T1, | |
403 | .chip_mac = CHBT_MAC_PM3393, | |
404 | .chip_phy = CHBT_PHY_MY3126, | |
405 | .clock_core = 125000000, | |
406 | .clock_mc3 = 150000000, | |
407 | .clock_mc4 = 125000000, | |
408 | .espi_nports = 1, | |
409 | .clock_elmer0 = 44, | |
410 | .mdio_mdien = 1, | |
411 | .mdio_mdiinv = 1, | |
412 | .mdio_mdc = 1, | |
413 | .mdio_phybaseaddr = 1, | |
414 | .gmac = &t1_pm3393_ops, | |
415 | .gphy = &t1_my3126_ops, | |
416 | .mdio_ops = &mi1_mdio_ext_ops, | |
417 | .desc = "Chelsio T110 1x10GBase-CX4 TOE", | |
418 | }, | |
419 | ||
420 | { | |
421 | .board = CHBT_BOARD_N110, | |
422 | .port_number = 1, | |
423 | .caps = SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE, | |
424 | .chip_term = CHBT_TERM_T1, | |
425 | .chip_mac = CHBT_MAC_PM3393, | |
426 | .chip_phy = CHBT_PHY_88X2010, | |
427 | .clock_core = 125000000, | |
428 | .espi_nports = 1, | |
429 | .clock_elmer0 = 44, | |
430 | .mdio_mdien = 0, | |
431 | .mdio_mdiinv = 0, | |
432 | .mdio_mdc = 1, | |
433 | .mdio_phybaseaddr = 0, | |
434 | .gmac = &t1_pm3393_ops, | |
435 | .gphy = &t1_mv88x201x_ops, | |
436 | .mdio_ops = &mi1_mdio_ext_ops, | |
437 | .desc = "Chelsio N110 1x10GBaseX NIC", | |
438 | }, | |
439 | ||
440 | { | |
441 | .board = CHBT_BOARD_N210, | |
442 | .port_number = 1, | |
443 | .caps = SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE, | |
444 | .chip_term = CHBT_TERM_T2, | |
445 | .chip_mac = CHBT_MAC_PM3393, | |
446 | .chip_phy = CHBT_PHY_88X2010, | |
447 | .clock_core = 125000000, | |
448 | .espi_nports = 1, | |
449 | .clock_elmer0 = 44, | |
450 | .mdio_mdien = 0, | |
451 | .mdio_mdiinv = 0, | |
452 | .mdio_mdc = 1, | |
453 | .mdio_phybaseaddr = 0, | |
454 | .gmac = &t1_pm3393_ops, | |
455 | .gphy = &t1_mv88x201x_ops, | |
456 | .mdio_ops = &mi1_mdio_ext_ops, | |
457 | .desc = "Chelsio N210 1x10GBaseX NIC", | |
458 | }, | |
459 | ||
460 | { | |
461 | .board = CHBT_BOARD_CHT210, | |
462 | .port_number = 1, | |
463 | .caps = SUPPORTED_10000baseT_Full, | |
464 | .chip_term = CHBT_TERM_T2, | |
465 | .chip_mac = CHBT_MAC_PM3393, | |
466 | .chip_phy = CHBT_PHY_88X2010, | |
467 | .clock_core = 125000000, | |
468 | .clock_mc3 = 133000000, | |
469 | .clock_mc4 = 125000000, | |
470 | .espi_nports = 1, | |
471 | .clock_elmer0 = 44, | |
472 | .mdio_mdien = 0, | |
473 | .mdio_mdiinv = 0, | |
474 | .mdio_mdc = 1, | |
475 | .mdio_phybaseaddr = 0, | |
476 | .gmac = &t1_pm3393_ops, | |
477 | .gphy = &t1_mv88x201x_ops, | |
478 | .mdio_ops = &mi1_mdio_ext_ops, | |
479 | .desc = "Chelsio T210 1x10GBaseX TOE", | |
480 | }, | |
481 | ||
482 | { | |
483 | .board = CHBT_BOARD_CHT210, | |
484 | .port_number = 1, | |
485 | .caps = SUPPORTED_10000baseT_Full, | |
486 | .chip_term = CHBT_TERM_T2, | |
487 | .chip_mac = CHBT_MAC_PM3393, | |
488 | .chip_phy = CHBT_PHY_MY3126, | |
489 | .clock_core = 125000000, | |
490 | .clock_mc3 = 133000000, | |
491 | .clock_mc4 = 125000000, | |
492 | .espi_nports = 1, | |
493 | .clock_elmer0 = 44, | |
494 | .mdio_mdien = 1, | |
495 | .mdio_mdiinv = 1, | |
496 | .mdio_mdc = 1, | |
497 | .mdio_phybaseaddr = 1, | |
498 | .gmac = &t1_pm3393_ops, | |
499 | .gphy = &t1_my3126_ops, | |
500 | .mdio_ops = &mi1_mdio_ext_ops, | |
501 | .desc = "Chelsio T210 1x10GBase-CX4 TOE", | |
502 | }, | |
f1d3d38a | 503 | |
352c417d | 504 | #ifdef CONFIG_CHELSIO_T1_1G |
4c247db1 SH |
505 | { |
506 | .board = CHBT_BOARD_CHN204, | |
507 | .port_number = 4, | |
508 | .caps = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | |
509 | | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | |
510 | | SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | | |
511 | SUPPORTED_PAUSE | SUPPORTED_TP, | |
512 | .chip_term = CHBT_TERM_T2, | |
513 | .chip_mac = CHBT_MAC_VSC7321, | |
514 | .chip_phy = CHBT_PHY_88E1111, | |
515 | .clock_core = 100000000, | |
516 | .espi_nports = 4, | |
517 | .clock_elmer0 = 44, | |
518 | .mdio_mdien = 0, | |
519 | .mdio_mdiinv = 0, | |
520 | .mdio_mdc = 0, | |
521 | .mdio_phybaseaddr = 4, | |
522 | .gmac = &t1_vsc7326_ops, | |
523 | .gphy = &t1_mv88e1xxx_ops, | |
524 | .mdio_ops = &mi1_mdio_ops, | |
525 | .desc = "Chelsio N204 4x100/1000BaseT NIC", | |
526 | }, | |
352c417d | 527 | #endif |
f1d3d38a | 528 | |
8199d3a7 CL |
529 | }; |
530 | ||
531 | struct pci_device_id t1_pci_tbl[] = { | |
f1d3d38a SH |
532 | CH_DEVICE(8, 0, CH_BRD_T110_1CU), |
533 | CH_DEVICE(8, 1, CH_BRD_T110_1CU), | |
8199d3a7 CL |
534 | CH_DEVICE(7, 0, CH_BRD_N110_1F), |
535 | CH_DEVICE(10, 1, CH_BRD_N210_1F), | |
f1d3d38a SH |
536 | CH_DEVICE(11, 1, CH_BRD_T210_1F), |
537 | CH_DEVICE(14, 1, CH_BRD_T210_1CU), | |
538 | CH_DEVICE(16, 1, CH_BRD_N204_4CU), | |
539 | { 0 } | |
8199d3a7 CL |
540 | }; |
541 | ||
559fb51b SB |
542 | MODULE_DEVICE_TABLE(pci, t1_pci_tbl); |
543 | ||
8199d3a7 CL |
544 | /* |
545 | * Return the board_info structure with a given index. Out-of-range indices | |
546 | * return NULL. | |
547 | */ | |
548 | const struct board_info *t1_get_board_info(unsigned int board_id) | |
549 | { | |
559fb51b | 550 | return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL; |
8199d3a7 CL |
551 | } |
552 | ||
553 | struct chelsio_vpd_t { | |
554 | u32 format_version; | |
555 | u8 serial_number[16]; | |
556 | u8 mac_base_address[6]; | |
557 | u8 pad[2]; /* make multiple-of-4 size requirement explicit */ | |
558 | }; | |
559 | ||
560 | #define EEPROMSIZE (8 * 1024) | |
561 | #define EEPROM_MAX_POLL 4 | |
562 | ||
563 | /* | |
564 | * Read SEEPROM. A zero is written to the flag register when the addres is | |
565 | * written to the Control register. The hardware device will set the flag to a | |
566 | * one when 4B have been transferred to the Data register. | |
567 | */ | |
ac390c60 | 568 | int t1_seeprom_read(adapter_t *adapter, u32 addr, __le32 *data) |
8199d3a7 CL |
569 | { |
570 | int i = EEPROM_MAX_POLL; | |
571 | u16 val; | |
ac390c60 | 572 | u32 v; |
8199d3a7 CL |
573 | |
574 | if (addr >= EEPROMSIZE || (addr & 3)) | |
575 | return -EINVAL; | |
576 | ||
577 | pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr); | |
578 | do { | |
579 | udelay(50); | |
580 | pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val); | |
581 | } while (!(val & F_VPD_OP_FLAG) && --i); | |
582 | ||
583 | if (!(val & F_VPD_OP_FLAG)) { | |
584 | CH_ERR("%s: reading EEPROM address 0x%x failed\n", | |
585 | adapter->name, addr); | |
586 | return -EIO; | |
587 | } | |
ac390c60 AV |
588 | pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, &v); |
589 | *data = cpu_to_le32(v); | |
8199d3a7 CL |
590 | return 0; |
591 | } | |
592 | ||
593 | static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd) | |
594 | { | |
595 | int addr, ret = 0; | |
596 | ||
597 | for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32)) | |
598 | ret = t1_seeprom_read(adapter, addr, | |
ac390c60 | 599 | (__le32 *)((u8 *)vpd + addr)); |
8199d3a7 CL |
600 | |
601 | return ret; | |
602 | } | |
603 | ||
604 | /* | |
605 | * Read a port's MAC address from the VPD ROM. | |
606 | */ | |
607 | static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[]) | |
608 | { | |
609 | struct chelsio_vpd_t vpd; | |
610 | ||
611 | if (t1_eeprom_vpd_get(adapter, &vpd)) | |
612 | return 1; | |
613 | memcpy(mac_addr, vpd.mac_base_address, 5); | |
614 | mac_addr[5] = vpd.mac_base_address[5] + index; | |
615 | return 0; | |
616 | } | |
617 | ||
618 | /* | |
619 | * Set up the MAC/PHY according to the requested link settings. | |
620 | * | |
621 | * If the PHY can auto-negotiate first decide what to advertise, then | |
622 | * enable/disable auto-negotiation as desired and reset. | |
623 | * | |
624 | * If the PHY does not auto-negotiate we just reset it. | |
625 | * | |
626 | * If auto-negotiation is off set the MAC to the proper speed/duplex/FC, | |
627 | * otherwise do it later based on the outcome of auto-negotiation. | |
628 | */ | |
629 | int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc) | |
630 | { | |
631 | unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); | |
632 | ||
633 | if (lc->supported & SUPPORTED_Autoneg) { | |
634 | lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE); | |
635 | if (fc) { | |
f1d3d38a SH |
636 | if (fc == ((PAUSE_RX | PAUSE_TX) & |
637 | (mac->adapter->params.nports < 2))) | |
8199d3a7 | 638 | lc->advertising |= ADVERTISED_PAUSE; |
f1d3d38a SH |
639 | else { |
640 | lc->advertising |= ADVERTISED_ASYM_PAUSE; | |
641 | if (fc == PAUSE_RX) | |
642 | lc->advertising |= ADVERTISED_PAUSE; | |
643 | } | |
8199d3a7 CL |
644 | } |
645 | phy->ops->advertise(phy, lc->advertising); | |
646 | ||
647 | if (lc->autoneg == AUTONEG_DISABLE) { | |
648 | lc->speed = lc->requested_speed; | |
649 | lc->duplex = lc->requested_duplex; | |
650 | lc->fc = (unsigned char)fc; | |
651 | mac->ops->set_speed_duplex_fc(mac, lc->speed, | |
652 | lc->duplex, fc); | |
653 | /* Also disables autoneg */ | |
f1d3d38a | 654 | phy->state = PHY_AUTONEG_RDY; |
8199d3a7 CL |
655 | phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex); |
656 | phy->ops->reset(phy, 0); | |
f1d3d38a SH |
657 | } else { |
658 | phy->state = PHY_AUTONEG_EN; | |
8199d3a7 | 659 | phy->ops->autoneg_enable(phy); /* also resets PHY */ |
f1d3d38a | 660 | } |
8199d3a7 | 661 | } else { |
f1d3d38a | 662 | phy->state = PHY_AUTONEG_RDY; |
8199d3a7 CL |
663 | mac->ops->set_speed_duplex_fc(mac, -1, -1, fc); |
664 | lc->fc = (unsigned char)fc; | |
665 | phy->ops->reset(phy, 0); | |
666 | } | |
667 | return 0; | |
668 | } | |
669 | ||
670 | /* | |
671 | * External interrupt handler for boards using elmer0. | |
672 | */ | |
f1d3d38a | 673 | int t1_elmer0_ext_intr_handler(adapter_t *adapter) |
8199d3a7 | 674 | { |
11e5a202 | 675 | struct cphy *phy; |
8199d3a7 | 676 | int phy_cause; |
11e5a202 | 677 | u32 cause; |
8199d3a7 CL |
678 | |
679 | t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause); | |
680 | ||
681 | switch (board_info(adapter)->board) { | |
352c417d | 682 | #ifdef CONFIG_CHELSIO_T1_1G |
356bd146 FR |
683 | case CHBT_BOARD_CHT204: |
684 | case CHBT_BOARD_CHT204E: | |
685 | case CHBT_BOARD_CHN204: | |
686 | case CHBT_BOARD_CHT204V: { | |
687 | int i, port_bit; | |
352c417d SH |
688 | for_each_port(adapter, i) { |
689 | port_bit = i + 1; | |
c697f83e FR |
690 | if (!(cause & (1 << port_bit))) |
691 | continue; | |
352c417d | 692 | |
356bd146 | 693 | phy = adapter->port[i].phy; |
352c417d SH |
694 | phy_cause = phy->ops->interrupt_handler(phy); |
695 | if (phy_cause & cphy_cause_link_change) | |
696 | t1_link_changed(adapter, i); | |
697 | } | |
356bd146 FR |
698 | break; |
699 | } | |
352c417d SH |
700 | case CHBT_BOARD_CHT101: |
701 | if (cause & ELMER0_GP_BIT1) { /* Marvell 88E1111 interrupt */ | |
702 | phy = adapter->port[0].phy; | |
703 | phy_cause = phy->ops->interrupt_handler(phy); | |
704 | if (phy_cause & cphy_cause_link_change) | |
705 | t1_link_changed(adapter, 0); | |
706 | } | |
707 | break; | |
708 | case CHBT_BOARD_7500: { | |
709 | int p; | |
356bd146 | 710 | /* |
352c417d SH |
711 | * Elmer0's interrupt cause isn't useful here because there is |
712 | * only one bit that can be set for all 4 ports. This means | |
713 | * we are forced to check every PHY's interrupt status | |
714 | * register to see who initiated the interrupt. | |
356bd146 FR |
715 | */ |
716 | for_each_port(adapter, p) { | |
352c417d SH |
717 | phy = adapter->port[p].phy; |
718 | phy_cause = phy->ops->interrupt_handler(phy); | |
719 | if (phy_cause & cphy_cause_link_change) | |
720 | t1_link_changed(adapter, p); | |
721 | } | |
722 | break; | |
723 | } | |
724 | #endif | |
f1d3d38a | 725 | case CHBT_BOARD_CHT210: |
8199d3a7 CL |
726 | case CHBT_BOARD_N210: |
727 | case CHBT_BOARD_N110: | |
728 | if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */ | |
729 | phy = adapter->port[0].phy; | |
730 | phy_cause = phy->ops->interrupt_handler(phy); | |
731 | if (phy_cause & cphy_cause_link_change) | |
f1d3d38a SH |
732 | t1_link_changed(adapter, 0); |
733 | } | |
734 | break; | |
735 | case CHBT_BOARD_8000: | |
736 | case CHBT_BOARD_CHT110: | |
356bd146 | 737 | CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n", |
f1d3d38a SH |
738 | cause); |
739 | if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */ | |
740 | struct cmac *mac = adapter->port[0].mac; | |
741 | ||
742 | mac->ops->interrupt_handler(mac); | |
8199d3a7 | 743 | } |
f1d3d38a SH |
744 | if (cause & ELMER0_GP_BIT5) { /* XPAK MOD_DETECT */ |
745 | u32 mod_detect; | |
746 | ||
747 | t1_tpi_read(adapter, | |
748 | A_ELMER0_GPI_STAT, &mod_detect); | |
356bd146 | 749 | CH_MSG(adapter, INFO, LINK, "XPAK %s\n", |
f1d3d38a | 750 | mod_detect ? "removed" : "inserted"); |
356bd146 | 751 | } |
8199d3a7 | 752 | break; |
352c417d SH |
753 | #ifdef CONFIG_CHELSIO_T1_COUGAR |
754 | case CHBT_BOARD_COUGAR: | |
755 | if (adapter->params.nports == 1) { | |
756 | if (cause & ELMER0_GP_BIT1) { /* Vitesse MAC */ | |
757 | struct cmac *mac = adapter->port[0].mac; | |
758 | mac->ops->interrupt_handler(mac); | |
759 | } | |
760 | if (cause & ELMER0_GP_BIT5) { /* XPAK MOD_DETECT */ | |
761 | } | |
762 | } else { | |
763 | int i, port_bit; | |
764 | ||
765 | for_each_port(adapter, i) { | |
766 | port_bit = i ? i + 1 : 0; | |
c697f83e FR |
767 | if (!(cause & (1 << port_bit))) |
768 | continue; | |
352c417d SH |
769 | |
770 | phy = adapter->port[i].phy; | |
771 | phy_cause = phy->ops->interrupt_handler(phy); | |
772 | if (phy_cause & cphy_cause_link_change) | |
773 | t1_link_changed(adapter, i); | |
774 | } | |
775 | } | |
776 | break; | |
777 | #endif | |
8199d3a7 CL |
778 | } |
779 | t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause); | |
780 | return 0; | |
781 | } | |
782 | ||
783 | /* Enables all interrupts. */ | |
784 | void t1_interrupts_enable(adapter_t *adapter) | |
785 | { | |
786 | unsigned int i; | |
787 | ||
f1d3d38a | 788 | adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP; |
8199d3a7 CL |
789 | |
790 | t1_sge_intr_enable(adapter->sge); | |
f1d3d38a | 791 | t1_tp_intr_enable(adapter->tp); |
8199d3a7 CL |
792 | if (adapter->espi) { |
793 | adapter->slow_intr_mask |= F_PL_INTR_ESPI; | |
794 | t1_espi_intr_enable(adapter->espi); | |
795 | } | |
796 | ||
797 | /* Enable MAC/PHY interrupts for each port. */ | |
798 | for_each_port(adapter, i) { | |
799 | adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac); | |
800 | adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy); | |
801 | } | |
802 | ||
803 | /* Enable PCIX & external chip interrupts on ASIC boards. */ | |
f1d3d38a SH |
804 | if (t1_is_asic(adapter)) { |
805 | u32 pl_intr = readl(adapter->regs + A_PL_ENABLE); | |
8199d3a7 | 806 | |
f1d3d38a SH |
807 | /* PCI-X interrupts */ |
808 | pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, | |
809 | 0xffffffff); | |
8199d3a7 | 810 | |
f1d3d38a SH |
811 | adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; |
812 | pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; | |
813 | writel(pl_intr, adapter->regs + A_PL_ENABLE); | |
814 | } | |
8199d3a7 CL |
815 | } |
816 | ||
817 | /* Disables all interrupts. */ | |
818 | void t1_interrupts_disable(adapter_t* adapter) | |
819 | { | |
820 | unsigned int i; | |
821 | ||
822 | t1_sge_intr_disable(adapter->sge); | |
f1d3d38a | 823 | t1_tp_intr_disable(adapter->tp); |
8199d3a7 CL |
824 | if (adapter->espi) |
825 | t1_espi_intr_disable(adapter->espi); | |
826 | ||
827 | /* Disable MAC/PHY interrupts for each port. */ | |
828 | for_each_port(adapter, i) { | |
829 | adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac); | |
830 | adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy); | |
831 | } | |
832 | ||
833 | /* Disable PCIX & external chip interrupts. */ | |
f1d3d38a | 834 | if (t1_is_asic(adapter)) |
356bd146 | 835 | writel(0, adapter->regs + A_PL_ENABLE); |
8199d3a7 CL |
836 | |
837 | /* PCI-X interrupts */ | |
838 | pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0); | |
839 | ||
840 | adapter->slow_intr_mask = 0; | |
841 | } | |
842 | ||
843 | /* Clears all interrupts */ | |
844 | void t1_interrupts_clear(adapter_t* adapter) | |
845 | { | |
846 | unsigned int i; | |
847 | ||
848 | t1_sge_intr_clear(adapter->sge); | |
f1d3d38a | 849 | t1_tp_intr_clear(adapter->tp); |
8199d3a7 CL |
850 | if (adapter->espi) |
851 | t1_espi_intr_clear(adapter->espi); | |
852 | ||
853 | /* Clear MAC/PHY interrupts for each port. */ | |
854 | for_each_port(adapter, i) { | |
855 | adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac); | |
856 | adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy); | |
857 | } | |
858 | ||
859 | /* Enable interrupts for external devices. */ | |
f1d3d38a SH |
860 | if (t1_is_asic(adapter)) { |
861 | u32 pl_intr = readl(adapter->regs + A_PL_CAUSE); | |
8199d3a7 | 862 | |
f1d3d38a SH |
863 | writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX, |
864 | adapter->regs + A_PL_CAUSE); | |
865 | } | |
8199d3a7 CL |
866 | |
867 | /* PCI-X interrupts */ | |
868 | pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff); | |
869 | } | |
870 | ||
871 | /* | |
872 | * Slow path interrupt handler for ASICs. | |
873 | */ | |
f1d3d38a | 874 | static int asic_slow_intr(adapter_t *adapter) |
8199d3a7 | 875 | { |
559fb51b | 876 | u32 cause = readl(adapter->regs + A_PL_CAUSE); |
8199d3a7 CL |
877 | |
878 | cause &= adapter->slow_intr_mask; | |
879 | if (!cause) | |
880 | return 0; | |
881 | if (cause & F_PL_INTR_SGE_ERR) | |
882 | t1_sge_intr_error_handler(adapter->sge); | |
f1d3d38a SH |
883 | if (cause & F_PL_INTR_TP) |
884 | t1_tp_intr_handler(adapter->tp); | |
8199d3a7 CL |
885 | if (cause & F_PL_INTR_ESPI) |
886 | t1_espi_intr_handler(adapter->espi); | |
887 | if (cause & F_PL_INTR_PCIX) | |
888 | t1_pci_intr_handler(adapter); | |
889 | if (cause & F_PL_INTR_EXT) | |
33a85aa1 | 890 | t1_elmer0_ext_intr(adapter); |
8199d3a7 CL |
891 | |
892 | /* Clear the interrupts just processed. */ | |
559fb51b | 893 | writel(cause, adapter->regs + A_PL_CAUSE); |
f1d3d38a | 894 | readl(adapter->regs + A_PL_CAUSE); /* flush writes */ |
8199d3a7 CL |
895 | return 1; |
896 | } | |
897 | ||
f1d3d38a | 898 | int t1_slow_intr_handler(adapter_t *adapter) |
8199d3a7 | 899 | { |
352c417d SH |
900 | #ifdef CONFIG_CHELSIO_T1_1G |
901 | if (!t1_is_asic(adapter)) | |
902 | return fpga_slow_intr(adapter); | |
903 | #endif | |
f1d3d38a | 904 | return asic_slow_intr(adapter); |
559fb51b | 905 | } |
8199d3a7 | 906 | |
f1d3d38a SH |
907 | /* Power sequencing is a work-around for Intel's XPAKs. */ |
908 | static void power_sequence_xpak(adapter_t* adapter) | |
559fb51b | 909 | { |
356bd146 FR |
910 | u32 mod_detect; |
911 | u32 gpo; | |
559fb51b | 912 | |
356bd146 FR |
913 | /* Check for XPAK */ |
914 | t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); | |
f1d3d38a SH |
915 | if (!(ELMER0_GP_BIT5 & mod_detect)) { |
916 | /* XPAK is present */ | |
917 | t1_tpi_read(adapter, A_ELMER0_GPO, &gpo); | |
918 | gpo |= ELMER0_GP_BIT18; | |
919 | t1_tpi_write(adapter, A_ELMER0_GPO, gpo); | |
8199d3a7 CL |
920 | } |
921 | } | |
922 | ||
923 | int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, | |
924 | struct adapter_params *p) | |
925 | { | |
926 | p->chip_version = bi->chip_term; | |
f1d3d38a | 927 | p->is_asic = (p->chip_version != CHBT_TERM_FPGA); |
8199d3a7 | 928 | if (p->chip_version == CHBT_TERM_T1 || |
f1d3d38a SH |
929 | p->chip_version == CHBT_TERM_T2 || |
930 | p->chip_version == CHBT_TERM_FPGA) { | |
559fb51b | 931 | u32 val = readl(adapter->regs + A_TP_PC_CONFIG); |
8199d3a7 CL |
932 | |
933 | val = G_TP_PC_REV(val); | |
934 | if (val == 2) | |
935 | p->chip_revision = TERM_T1B; | |
936 | else if (val == 3) | |
937 | p->chip_revision = TERM_T2; | |
938 | else | |
939 | return -1; | |
940 | } else | |
941 | return -1; | |
942 | return 0; | |
943 | } | |
944 | ||
945 | /* | |
946 | * Enable board components other than the Chelsio chip, such as external MAC | |
947 | * and PHY. | |
948 | */ | |
949 | static int board_init(adapter_t *adapter, const struct board_info *bi) | |
950 | { | |
951 | switch (bi->board) { | |
f1d3d38a | 952 | case CHBT_BOARD_8000: |
8199d3a7 CL |
953 | case CHBT_BOARD_N110: |
954 | case CHBT_BOARD_N210: | |
f1d3d38a SH |
955 | case CHBT_BOARD_CHT210: |
956 | case CHBT_BOARD_COUGAR: | |
356bd146 FR |
957 | t1_tpi_par(adapter, 0xf); |
958 | t1_tpi_write(adapter, A_ELMER0_GPO, 0x800); | |
f1d3d38a SH |
959 | break; |
960 | case CHBT_BOARD_CHT110: | |
356bd146 FR |
961 | t1_tpi_par(adapter, 0xf); |
962 | t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800); | |
f1d3d38a | 963 | |
356bd146 FR |
964 | /* TBD XXX Might not need. This fixes a problem |
965 | * described in the Intel SR XPAK errata. | |
966 | */ | |
967 | power_sequence_xpak(adapter); | |
8199d3a7 | 968 | break; |
352c417d | 969 | #ifdef CONFIG_CHELSIO_T1_1G |
356bd146 FR |
970 | case CHBT_BOARD_CHT204E: |
971 | /* add config space write here */ | |
352c417d SH |
972 | case CHBT_BOARD_CHT204: |
973 | case CHBT_BOARD_CHT204V: | |
974 | case CHBT_BOARD_CHN204: | |
356bd146 FR |
975 | t1_tpi_par(adapter, 0xf); |
976 | t1_tpi_write(adapter, A_ELMER0_GPO, 0x804); | |
977 | break; | |
352c417d SH |
978 | case CHBT_BOARD_CHT101: |
979 | case CHBT_BOARD_7500: | |
356bd146 FR |
980 | t1_tpi_par(adapter, 0xf); |
981 | t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804); | |
352c417d SH |
982 | break; |
983 | #endif | |
8199d3a7 CL |
984 | } |
985 | return 0; | |
986 | } | |
987 | ||
988 | /* | |
989 | * Initialize and configure the Terminator HW modules. Note that external | |
990 | * MAC and PHYs are initialized separately. | |
991 | */ | |
992 | int t1_init_hw_modules(adapter_t *adapter) | |
993 | { | |
994 | int err = -EIO; | |
995 | const struct board_info *bi = board_info(adapter); | |
996 | ||
559fb51b SB |
997 | if (!bi->clock_mc4) { |
998 | u32 val = readl(adapter->regs + A_MC4_CFG); | |
8199d3a7 | 999 | |
559fb51b SB |
1000 | writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG); |
1001 | writel(F_M_BUS_ENABLE | F_TCAM_RESET, | |
1002 | adapter->regs + A_MC5_CONFIG); | |
8199d3a7 CL |
1003 | } |
1004 | ||
352c417d SH |
1005 | #ifdef CONFIG_CHELSIO_T1_COUGAR |
1006 | if (adapter->cspi && t1_cspi_init(adapter->cspi)) | |
1007 | goto out_err; | |
1008 | #endif | |
8199d3a7 CL |
1009 | if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac, |
1010 | bi->espi_nports)) | |
1011 | goto out_err; | |
1012 | ||
f1d3d38a SH |
1013 | if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core)) |
1014 | goto out_err; | |
8199d3a7 CL |
1015 | |
1016 | err = t1_sge_configure(adapter->sge, &adapter->params.sge); | |
1017 | if (err) | |
1018 | goto out_err; | |
1019 | ||
1020 | err = 0; | |
356bd146 | 1021 | out_err: |
8199d3a7 CL |
1022 | return err; |
1023 | } | |
1024 | ||
1025 | /* | |
1026 | * Determine a card's PCI mode. | |
1027 | */ | |
559fb51b | 1028 | static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p) |
8199d3a7 | 1029 | { |
f71e1309 | 1030 | static const unsigned short speed_map[] = { 33, 66, 100, 133 }; |
8199d3a7 CL |
1031 | u32 pci_mode; |
1032 | ||
1033 | pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode); | |
1034 | p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)]; | |
1035 | p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32; | |
1036 | p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0; | |
1037 | } | |
1038 | ||
1039 | /* | |
1040 | * Release the structures holding the SW per-Terminator-HW-module state. | |
1041 | */ | |
1042 | void t1_free_sw_modules(adapter_t *adapter) | |
1043 | { | |
1044 | unsigned int i; | |
1045 | ||
1046 | for_each_port(adapter, i) { | |
1047 | struct cmac *mac = adapter->port[i].mac; | |
1048 | struct cphy *phy = adapter->port[i].phy; | |
1049 | ||
1050 | if (mac) | |
1051 | mac->ops->destroy(mac); | |
1052 | if (phy) | |
1053 | phy->ops->destroy(phy); | |
1054 | } | |
1055 | ||
1056 | if (adapter->sge) | |
1057 | t1_sge_destroy(adapter->sge); | |
f1d3d38a SH |
1058 | if (adapter->tp) |
1059 | t1_tp_destroy(adapter->tp); | |
8199d3a7 CL |
1060 | if (adapter->espi) |
1061 | t1_espi_destroy(adapter->espi); | |
352c417d | 1062 | #ifdef CONFIG_CHELSIO_T1_COUGAR |
356bd146 | 1063 | if (adapter->cspi) |
352c417d SH |
1064 | t1_cspi_destroy(adapter->cspi); |
1065 | #endif | |
8199d3a7 CL |
1066 | } |
1067 | ||
1068 | static void __devinit init_link_config(struct link_config *lc, | |
1069 | const struct board_info *bi) | |
1070 | { | |
1071 | lc->supported = bi->caps; | |
1072 | lc->requested_speed = lc->speed = SPEED_INVALID; | |
1073 | lc->requested_duplex = lc->duplex = DUPLEX_INVALID; | |
1074 | lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; | |
1075 | if (lc->supported & SUPPORTED_Autoneg) { | |
1076 | lc->advertising = lc->supported; | |
1077 | lc->autoneg = AUTONEG_ENABLE; | |
1078 | lc->requested_fc |= PAUSE_AUTONEG; | |
1079 | } else { | |
1080 | lc->advertising = 0; | |
1081 | lc->autoneg = AUTONEG_DISABLE; | |
1082 | } | |
1083 | } | |
1084 | ||
352c417d SH |
1085 | #ifdef CONFIG_CHELSIO_T1_COUGAR |
1086 | if (bi->clock_cspi && !(adapter->cspi = t1_cspi_create(adapter))) { | |
1087 | CH_ERR("%s: CSPI initialization failed\n", | |
1088 | adapter->name); | |
1089 | goto error; | |
356bd146 | 1090 | } |
352c417d | 1091 | #endif |
8199d3a7 CL |
1092 | |
1093 | /* | |
1094 | * Allocate and initialize the data structures that hold the SW state of | |
1095 | * the Terminator HW modules. | |
1096 | */ | |
1097 | int __devinit t1_init_sw_modules(adapter_t *adapter, | |
1098 | const struct board_info *bi) | |
1099 | { | |
1100 | unsigned int i; | |
1101 | ||
1102 | adapter->params.brd_info = bi; | |
1103 | adapter->params.nports = bi->port_number; | |
1104 | adapter->params.stats_update_period = bi->gmac->stats_update_period; | |
1105 | ||
1106 | adapter->sge = t1_sge_create(adapter, &adapter->params.sge); | |
1107 | if (!adapter->sge) { | |
1108 | CH_ERR("%s: SGE initialization failed\n", | |
1109 | adapter->name); | |
1110 | goto error; | |
1111 | } | |
1112 | ||
8199d3a7 CL |
1113 | if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) { |
1114 | CH_ERR("%s: ESPI initialization failed\n", | |
1115 | adapter->name); | |
1116 | goto error; | |
1117 | } | |
1118 | ||
f1d3d38a SH |
1119 | adapter->tp = t1_tp_create(adapter, &adapter->params.tp); |
1120 | if (!adapter->tp) { | |
1121 | CH_ERR("%s: TP initialization failed\n", | |
1122 | adapter->name); | |
1123 | goto error; | |
1124 | } | |
1125 | ||
8199d3a7 CL |
1126 | board_init(adapter, bi); |
1127 | bi->mdio_ops->init(adapter, bi); | |
1128 | if (bi->gphy->reset) | |
1129 | bi->gphy->reset(adapter); | |
1130 | if (bi->gmac->reset) | |
1131 | bi->gmac->reset(adapter); | |
1132 | ||
1133 | for_each_port(adapter, i) { | |
1134 | u8 hw_addr[6]; | |
1135 | struct cmac *mac; | |
1136 | int phy_addr = bi->mdio_phybaseaddr + i; | |
1137 | ||
703cebab DLR |
1138 | adapter->port[i].phy = bi->gphy->create(adapter->port[i].dev, |
1139 | phy_addr, bi->mdio_ops); | |
8199d3a7 CL |
1140 | if (!adapter->port[i].phy) { |
1141 | CH_ERR("%s: PHY %d initialization failed\n", | |
1142 | adapter->name, i); | |
1143 | goto error; | |
1144 | } | |
1145 | ||
1146 | adapter->port[i].mac = mac = bi->gmac->create(adapter, i); | |
1147 | if (!mac) { | |
1148 | CH_ERR("%s: MAC %d initialization failed\n", | |
1149 | adapter->name, i); | |
1150 | goto error; | |
1151 | } | |
1152 | ||
1153 | /* | |
1154 | * Get the port's MAC addresses either from the EEPROM if one | |
1155 | * exists or the one hardcoded in the MAC. | |
1156 | */ | |
f1d3d38a SH |
1157 | if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY) |
1158 | mac->ops->macaddress_get(mac, hw_addr); | |
1159 | else if (vpd_macaddress_get(adapter, i, hw_addr)) { | |
8199d3a7 | 1160 | CH_ERR("%s: could not read MAC address from VPD ROM\n", |
559fb51b | 1161 | adapter->port[i].dev->name); |
8199d3a7 CL |
1162 | goto error; |
1163 | } | |
559fb51b | 1164 | memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN); |
8199d3a7 CL |
1165 | init_link_config(&adapter->port[i].link_config, bi); |
1166 | } | |
1167 | ||
1168 | get_pci_mode(adapter, &adapter->params.pci); | |
1169 | t1_interrupts_clear(adapter); | |
1170 | return 0; | |
1171 | ||
f1d3d38a | 1172 | error: |
8199d3a7 CL |
1173 | t1_free_sw_modules(adapter); |
1174 | return -1; | |
1175 | } |