Commit | Line | Data |
---|---|---|
39549eef WG |
1 | /* |
2 | * Copyright (C) 2005 Marc Kleine-Budde, Pengutronix | |
3 | * Copyright (C) 2006 Andrey Volkov, Varma Electronics | |
4 | * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the version 2 of the GNU General Public License | |
8 | * as published by the Free Software Foundation | |
9 | * | |
10 | * This program is distributed in the hope that it will be useful, | |
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | * GNU General Public License for more details. | |
14 | * | |
15 | * You should have received a copy of the GNU General Public License | |
16 | * along with this program; if not, write to the Free Software | |
17 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
18 | */ | |
19 | ||
20 | #include <linux/module.h> | |
21 | #include <linux/kernel.h> | |
22 | #include <linux/netdevice.h> | |
23 | #include <linux/if_arp.h> | |
24 | #include <linux/can.h> | |
25 | #include <linux/can/dev.h> | |
26 | #include <linux/can/netlink.h> | |
27 | #include <net/rtnetlink.h> | |
28 | ||
29 | #define MOD_DESC "CAN device driver interface" | |
30 | ||
31 | MODULE_DESCRIPTION(MOD_DESC); | |
32 | MODULE_LICENSE("GPL v2"); | |
33 | MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>"); | |
34 | ||
35 | #ifdef CONFIG_CAN_CALC_BITTIMING | |
36 | #define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */ | |
37 | ||
38 | /* | |
39 | * Bit-timing calculation derived from: | |
40 | * | |
41 | * Code based on LinCAN sources and H8S2638 project | |
42 | * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz | |
43 | * Copyright 2005 Stanislav Marek | |
44 | * email: pisa@cmp.felk.cvut.cz | |
45 | * | |
46 | * Calculates proper bit-timing parameters for a specified bit-rate | |
47 | * and sample-point, which can then be used to set the bit-timing | |
48 | * registers of the CAN controller. You can find more information | |
49 | * in the header file linux/can/netlink.h. | |
50 | */ | |
51 | static int can_update_spt(const struct can_bittiming_const *btc, | |
52 | int sampl_pt, int tseg, int *tseg1, int *tseg2) | |
53 | { | |
54 | *tseg2 = tseg + 1 - (sampl_pt * (tseg + 1)) / 1000; | |
55 | if (*tseg2 < btc->tseg2_min) | |
56 | *tseg2 = btc->tseg2_min; | |
57 | if (*tseg2 > btc->tseg2_max) | |
58 | *tseg2 = btc->tseg2_max; | |
59 | *tseg1 = tseg - *tseg2; | |
60 | if (*tseg1 > btc->tseg1_max) { | |
61 | *tseg1 = btc->tseg1_max; | |
62 | *tseg2 = tseg - *tseg1; | |
63 | } | |
64 | return 1000 * (tseg + 1 - *tseg2) / (tseg + 1); | |
65 | } | |
66 | ||
67 | static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt) | |
68 | { | |
69 | struct can_priv *priv = netdev_priv(dev); | |
70 | const struct can_bittiming_const *btc = priv->bittiming_const; | |
71 | long rate, best_rate = 0; | |
72 | long best_error = 1000000000, error = 0; | |
73 | int best_tseg = 0, best_brp = 0, brp = 0; | |
74 | int tsegall, tseg = 0, tseg1 = 0, tseg2 = 0; | |
75 | int spt_error = 1000, spt = 0, sampl_pt; | |
76 | u64 v64; | |
77 | ||
78 | if (!priv->bittiming_const) | |
79 | return -ENOTSUPP; | |
80 | ||
81 | /* Use CIA recommended sample points */ | |
82 | if (bt->sample_point) { | |
83 | sampl_pt = bt->sample_point; | |
84 | } else { | |
85 | if (bt->bitrate > 800000) | |
86 | sampl_pt = 750; | |
87 | else if (bt->bitrate > 500000) | |
88 | sampl_pt = 800; | |
89 | else | |
90 | sampl_pt = 875; | |
91 | } | |
92 | ||
93 | /* tseg even = round down, odd = round up */ | |
94 | for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1; | |
95 | tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) { | |
96 | tsegall = 1 + tseg / 2; | |
97 | /* Compute all possible tseg choices (tseg=tseg1+tseg2) */ | |
98 | brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2; | |
99 | /* chose brp step which is possible in system */ | |
100 | brp = (brp / btc->brp_inc) * btc->brp_inc; | |
101 | if ((brp < btc->brp_min) || (brp > btc->brp_max)) | |
102 | continue; | |
103 | rate = priv->clock.freq / (brp * tsegall); | |
104 | error = bt->bitrate - rate; | |
105 | /* tseg brp biterror */ | |
106 | if (error < 0) | |
107 | error = -error; | |
108 | if (error > best_error) | |
109 | continue; | |
110 | best_error = error; | |
111 | if (error == 0) { | |
112 | spt = can_update_spt(btc, sampl_pt, tseg / 2, | |
113 | &tseg1, &tseg2); | |
114 | error = sampl_pt - spt; | |
115 | if (error < 0) | |
116 | error = -error; | |
117 | if (error > spt_error) | |
118 | continue; | |
119 | spt_error = error; | |
120 | } | |
121 | best_tseg = tseg / 2; | |
122 | best_brp = brp; | |
123 | best_rate = rate; | |
124 | if (error == 0) | |
125 | break; | |
126 | } | |
127 | ||
128 | if (best_error) { | |
129 | /* Error in one-tenth of a percent */ | |
130 | error = (best_error * 1000) / bt->bitrate; | |
131 | if (error > CAN_CALC_MAX_ERROR) { | |
132 | dev_err(dev->dev.parent, | |
133 | "bitrate error %ld.%ld%% too high\n", | |
134 | error / 10, error % 10); | |
135 | return -EDOM; | |
136 | } else { | |
137 | dev_warn(dev->dev.parent, "bitrate error %ld.%ld%%\n", | |
138 | error / 10, error % 10); | |
139 | } | |
140 | } | |
141 | ||
142 | /* real sample point */ | |
143 | bt->sample_point = can_update_spt(btc, sampl_pt, best_tseg, | |
144 | &tseg1, &tseg2); | |
145 | ||
146 | v64 = (u64)best_brp * 1000000000UL; | |
147 | do_div(v64, priv->clock.freq); | |
148 | bt->tq = (u32)v64; | |
149 | bt->prop_seg = tseg1 / 2; | |
150 | bt->phase_seg1 = tseg1 - bt->prop_seg; | |
151 | bt->phase_seg2 = tseg2; | |
152 | bt->sjw = 1; | |
153 | bt->brp = best_brp; | |
154 | /* real bit-rate */ | |
155 | bt->bitrate = priv->clock.freq / (bt->brp * (tseg1 + tseg2 + 1)); | |
156 | ||
157 | return 0; | |
158 | } | |
159 | #else /* !CONFIG_CAN_CALC_BITTIMING */ | |
160 | static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt) | |
161 | { | |
162 | dev_err(dev->dev.parent, "bit-timing calculation not available\n"); | |
163 | return -EINVAL; | |
164 | } | |
165 | #endif /* CONFIG_CAN_CALC_BITTIMING */ | |
166 | ||
167 | /* | |
168 | * Checks the validity of the specified bit-timing parameters prop_seg, | |
169 | * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate | |
170 | * prescaler value brp. You can find more information in the header | |
171 | * file linux/can/netlink.h. | |
172 | */ | |
173 | static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt) | |
174 | { | |
175 | struct can_priv *priv = netdev_priv(dev); | |
176 | const struct can_bittiming_const *btc = priv->bittiming_const; | |
177 | int tseg1, alltseg; | |
178 | u64 brp64; | |
179 | ||
180 | if (!priv->bittiming_const) | |
181 | return -ENOTSUPP; | |
182 | ||
183 | tseg1 = bt->prop_seg + bt->phase_seg1; | |
184 | if (!bt->sjw) | |
185 | bt->sjw = 1; | |
186 | if (bt->sjw > btc->sjw_max || | |
187 | tseg1 < btc->tseg1_min || tseg1 > btc->tseg1_max || | |
188 | bt->phase_seg2 < btc->tseg2_min || bt->phase_seg2 > btc->tseg2_max) | |
189 | return -ERANGE; | |
190 | ||
191 | brp64 = (u64)priv->clock.freq * (u64)bt->tq; | |
192 | if (btc->brp_inc > 1) | |
193 | do_div(brp64, btc->brp_inc); | |
194 | brp64 += 500000000UL - 1; | |
195 | do_div(brp64, 1000000000UL); /* the practicable BRP */ | |
196 | if (btc->brp_inc > 1) | |
197 | brp64 *= btc->brp_inc; | |
198 | bt->brp = (u32)brp64; | |
199 | ||
200 | if (bt->brp < btc->brp_min || bt->brp > btc->brp_max) | |
201 | return -EINVAL; | |
202 | ||
203 | alltseg = bt->prop_seg + bt->phase_seg1 + bt->phase_seg2 + 1; | |
204 | bt->bitrate = priv->clock.freq / (bt->brp * alltseg); | |
205 | bt->sample_point = ((tseg1 + 1) * 1000) / alltseg; | |
206 | ||
207 | return 0; | |
208 | } | |
209 | ||
210 | int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt) | |
211 | { | |
212 | struct can_priv *priv = netdev_priv(dev); | |
213 | int err; | |
214 | ||
215 | /* Check if the CAN device has bit-timing parameters */ | |
216 | if (priv->bittiming_const) { | |
217 | ||
218 | /* Non-expert mode? Check if the bitrate has been pre-defined */ | |
219 | if (!bt->tq) | |
220 | /* Determine bit-timing parameters */ | |
221 | err = can_calc_bittiming(dev, bt); | |
222 | else | |
223 | /* Check bit-timing params and calculate proper brp */ | |
224 | err = can_fixup_bittiming(dev, bt); | |
225 | if (err) | |
226 | return err; | |
227 | } | |
228 | ||
229 | return 0; | |
230 | } | |
231 | ||
232 | /* | |
233 | * Local echo of CAN messages | |
234 | * | |
235 | * CAN network devices *should* support a local echo functionality | |
236 | * (see Documentation/networking/can.txt). To test the handling of CAN | |
237 | * interfaces that do not support the local echo both driver types are | |
238 | * implemented. In the case that the driver does not support the echo | |
239 | * the IFF_ECHO remains clear in dev->flags. This causes the PF_CAN core | |
240 | * to perform the echo as a fallback solution. | |
241 | */ | |
242 | static void can_flush_echo_skb(struct net_device *dev) | |
243 | { | |
244 | struct can_priv *priv = netdev_priv(dev); | |
245 | struct net_device_stats *stats = &dev->stats; | |
246 | int i; | |
247 | ||
248 | for (i = 0; i < CAN_ECHO_SKB_MAX; i++) { | |
249 | if (priv->echo_skb[i]) { | |
250 | kfree_skb(priv->echo_skb[i]); | |
251 | priv->echo_skb[i] = NULL; | |
252 | stats->tx_dropped++; | |
253 | stats->tx_aborted_errors++; | |
254 | } | |
255 | } | |
256 | } | |
257 | ||
258 | /* | |
259 | * Put the skb on the stack to be looped backed locally lateron | |
260 | * | |
261 | * The function is typically called in the start_xmit function | |
262 | * of the device driver. The driver must protect access to | |
263 | * priv->echo_skb, if necessary. | |
264 | */ | |
265 | void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx) | |
266 | { | |
267 | struct can_priv *priv = netdev_priv(dev); | |
268 | ||
269 | /* check flag whether this packet has to be looped back */ | |
270 | if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK) { | |
271 | kfree_skb(skb); | |
272 | return; | |
273 | } | |
274 | ||
275 | if (!priv->echo_skb[idx]) { | |
276 | struct sock *srcsk = skb->sk; | |
277 | ||
278 | if (atomic_read(&skb->users) != 1) { | |
279 | struct sk_buff *old_skb = skb; | |
280 | ||
281 | skb = skb_clone(old_skb, GFP_ATOMIC); | |
282 | kfree_skb(old_skb); | |
283 | if (!skb) | |
284 | return; | |
285 | } else | |
286 | skb_orphan(skb); | |
287 | ||
288 | skb->sk = srcsk; | |
289 | ||
290 | /* make settings for echo to reduce code in irq context */ | |
291 | skb->protocol = htons(ETH_P_CAN); | |
292 | skb->pkt_type = PACKET_BROADCAST; | |
293 | skb->ip_summed = CHECKSUM_UNNECESSARY; | |
294 | skb->dev = dev; | |
295 | ||
296 | /* save this skb for tx interrupt echo handling */ | |
297 | priv->echo_skb[idx] = skb; | |
298 | } else { | |
299 | /* locking problem with netif_stop_queue() ?? */ | |
300 | dev_err(dev->dev.parent, "%s: BUG! echo_skb is occupied!\n", | |
301 | __func__); | |
302 | kfree_skb(skb); | |
303 | } | |
304 | } | |
305 | EXPORT_SYMBOL_GPL(can_put_echo_skb); | |
306 | ||
307 | /* | |
308 | * Get the skb from the stack and loop it back locally | |
309 | * | |
310 | * The function is typically called when the TX done interrupt | |
311 | * is handled in the device driver. The driver must protect | |
312 | * access to priv->echo_skb, if necessary. | |
313 | */ | |
314 | void can_get_echo_skb(struct net_device *dev, int idx) | |
315 | { | |
316 | struct can_priv *priv = netdev_priv(dev); | |
317 | ||
39e3ab6f | 318 | if (priv->echo_skb[idx]) { |
39549eef WG |
319 | netif_rx(priv->echo_skb[idx]); |
320 | priv->echo_skb[idx] = NULL; | |
321 | } | |
322 | } | |
323 | EXPORT_SYMBOL_GPL(can_get_echo_skb); | |
324 | ||
39e3ab6f WG |
325 | /* |
326 | * Remove the skb from the stack and free it. | |
327 | * | |
328 | * The function is typically called when TX failed. | |
329 | */ | |
330 | void can_free_echo_skb(struct net_device *dev, int idx) | |
331 | { | |
332 | struct can_priv *priv = netdev_priv(dev); | |
333 | ||
334 | if (priv->echo_skb[idx]) { | |
335 | kfree_skb(priv->echo_skb[idx]); | |
336 | priv->echo_skb[idx] = NULL; | |
337 | } | |
338 | } | |
339 | EXPORT_SYMBOL_GPL(can_free_echo_skb); | |
340 | ||
39549eef WG |
341 | /* |
342 | * CAN device restart for bus-off recovery | |
343 | */ | |
344 | void can_restart(unsigned long data) | |
345 | { | |
346 | struct net_device *dev = (struct net_device *)data; | |
347 | struct can_priv *priv = netdev_priv(dev); | |
348 | struct net_device_stats *stats = &dev->stats; | |
349 | struct sk_buff *skb; | |
350 | struct can_frame *cf; | |
351 | int err; | |
352 | ||
353 | BUG_ON(netif_carrier_ok(dev)); | |
354 | ||
355 | /* | |
356 | * No synchronization needed because the device is bus-off and | |
357 | * no messages can come in or go out. | |
358 | */ | |
359 | can_flush_echo_skb(dev); | |
360 | ||
361 | /* send restart message upstream */ | |
362 | skb = dev_alloc_skb(sizeof(struct can_frame)); | |
363 | if (skb == NULL) { | |
364 | err = -ENOMEM; | |
b3d0df7c | 365 | goto restart; |
39549eef WG |
366 | } |
367 | skb->dev = dev; | |
368 | skb->protocol = htons(ETH_P_CAN); | |
369 | cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); | |
370 | memset(cf, 0, sizeof(struct can_frame)); | |
371 | cf->can_id = CAN_ERR_FLAG | CAN_ERR_RESTARTED; | |
372 | cf->can_dlc = CAN_ERR_DLC; | |
373 | ||
374 | netif_rx(skb); | |
375 | ||
39549eef WG |
376 | stats->rx_packets++; |
377 | stats->rx_bytes += cf->can_dlc; | |
378 | ||
b3d0df7c | 379 | restart: |
39549eef WG |
380 | dev_dbg(dev->dev.parent, "restarted\n"); |
381 | priv->can_stats.restarts++; | |
382 | ||
383 | /* Now restart the device */ | |
384 | err = priv->do_set_mode(dev, CAN_MODE_START); | |
385 | ||
39549eef WG |
386 | netif_carrier_on(dev); |
387 | if (err) | |
388 | dev_err(dev->dev.parent, "Error %d during restart", err); | |
389 | } | |
390 | ||
391 | int can_restart_now(struct net_device *dev) | |
392 | { | |
393 | struct can_priv *priv = netdev_priv(dev); | |
394 | ||
395 | /* | |
396 | * A manual restart is only permitted if automatic restart is | |
397 | * disabled and the device is in the bus-off state | |
398 | */ | |
399 | if (priv->restart_ms) | |
400 | return -EINVAL; | |
401 | if (priv->state != CAN_STATE_BUS_OFF) | |
402 | return -EBUSY; | |
403 | ||
404 | /* Runs as soon as possible in the timer context */ | |
405 | mod_timer(&priv->restart_timer, jiffies); | |
406 | ||
407 | return 0; | |
408 | } | |
409 | ||
410 | /* | |
411 | * CAN bus-off | |
412 | * | |
413 | * This functions should be called when the device goes bus-off to | |
414 | * tell the netif layer that no more packets can be sent or received. | |
415 | * If enabled, a timer is started to trigger bus-off recovery. | |
416 | */ | |
417 | void can_bus_off(struct net_device *dev) | |
418 | { | |
419 | struct can_priv *priv = netdev_priv(dev); | |
420 | ||
421 | dev_dbg(dev->dev.parent, "bus-off\n"); | |
422 | ||
423 | netif_carrier_off(dev); | |
424 | priv->can_stats.bus_off++; | |
425 | ||
426 | if (priv->restart_ms) | |
427 | mod_timer(&priv->restart_timer, | |
428 | jiffies + (priv->restart_ms * HZ) / 1000); | |
429 | } | |
430 | EXPORT_SYMBOL_GPL(can_bus_off); | |
431 | ||
432 | static void can_setup(struct net_device *dev) | |
433 | { | |
434 | dev->type = ARPHRD_CAN; | |
435 | dev->mtu = sizeof(struct can_frame); | |
436 | dev->hard_header_len = 0; | |
437 | dev->addr_len = 0; | |
438 | dev->tx_queue_len = 10; | |
439 | ||
440 | /* New-style flags. */ | |
441 | dev->flags = IFF_NOARP; | |
442 | dev->features = NETIF_F_NO_CSUM; | |
443 | } | |
444 | ||
445 | /* | |
446 | * Allocate and setup space for the CAN network device | |
447 | */ | |
448 | struct net_device *alloc_candev(int sizeof_priv) | |
449 | { | |
450 | struct net_device *dev; | |
451 | struct can_priv *priv; | |
452 | ||
453 | dev = alloc_netdev(sizeof_priv, "can%d", can_setup); | |
454 | if (!dev) | |
455 | return NULL; | |
456 | ||
457 | priv = netdev_priv(dev); | |
458 | ||
459 | priv->state = CAN_STATE_STOPPED; | |
460 | ||
461 | init_timer(&priv->restart_timer); | |
462 | ||
463 | return dev; | |
464 | } | |
465 | EXPORT_SYMBOL_GPL(alloc_candev); | |
466 | ||
467 | /* | |
468 | * Free space of the CAN network device | |
469 | */ | |
470 | void free_candev(struct net_device *dev) | |
471 | { | |
472 | free_netdev(dev); | |
473 | } | |
474 | EXPORT_SYMBOL_GPL(free_candev); | |
475 | ||
476 | /* | |
477 | * Common open function when the device gets opened. | |
478 | * | |
479 | * This function should be called in the open function of the device | |
480 | * driver. | |
481 | */ | |
482 | int open_candev(struct net_device *dev) | |
483 | { | |
484 | struct can_priv *priv = netdev_priv(dev); | |
485 | ||
486 | if (!priv->bittiming.tq && !priv->bittiming.bitrate) { | |
487 | dev_err(dev->dev.parent, "bit-timing not yet defined\n"); | |
488 | return -EINVAL; | |
489 | } | |
490 | ||
1b0d9224 WG |
491 | /* Switch carrier on if device was stopped while in bus-off state */ |
492 | if (!netif_carrier_ok(dev)) | |
493 | netif_carrier_on(dev); | |
494 | ||
39549eef WG |
495 | setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev); |
496 | ||
497 | return 0; | |
498 | } | |
128ced8f | 499 | EXPORT_SYMBOL_GPL(open_candev); |
39549eef WG |
500 | |
501 | /* | |
502 | * Common close function for cleanup before the device gets closed. | |
503 | * | |
504 | * This function should be called in the close function of the device | |
505 | * driver. | |
506 | */ | |
507 | void close_candev(struct net_device *dev) | |
508 | { | |
509 | struct can_priv *priv = netdev_priv(dev); | |
510 | ||
511 | if (del_timer_sync(&priv->restart_timer)) | |
512 | dev_put(dev); | |
513 | can_flush_echo_skb(dev); | |
514 | } | |
515 | EXPORT_SYMBOL_GPL(close_candev); | |
516 | ||
517 | /* | |
518 | * CAN netlink interface | |
519 | */ | |
520 | static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = { | |
521 | [IFLA_CAN_STATE] = { .type = NLA_U32 }, | |
522 | [IFLA_CAN_CTRLMODE] = { .len = sizeof(struct can_ctrlmode) }, | |
523 | [IFLA_CAN_RESTART_MS] = { .type = NLA_U32 }, | |
524 | [IFLA_CAN_RESTART] = { .type = NLA_U32 }, | |
525 | [IFLA_CAN_BITTIMING] = { .len = sizeof(struct can_bittiming) }, | |
526 | [IFLA_CAN_BITTIMING_CONST] | |
527 | = { .len = sizeof(struct can_bittiming_const) }, | |
528 | [IFLA_CAN_CLOCK] = { .len = sizeof(struct can_clock) }, | |
529 | }; | |
530 | ||
531 | static int can_changelink(struct net_device *dev, | |
532 | struct nlattr *tb[], struct nlattr *data[]) | |
533 | { | |
534 | struct can_priv *priv = netdev_priv(dev); | |
535 | int err; | |
536 | ||
537 | /* We need synchronization with dev->stop() */ | |
538 | ASSERT_RTNL(); | |
539 | ||
540 | if (data[IFLA_CAN_CTRLMODE]) { | |
541 | struct can_ctrlmode *cm; | |
542 | ||
543 | /* Do not allow changing controller mode while running */ | |
544 | if (dev->flags & IFF_UP) | |
545 | return -EBUSY; | |
546 | cm = nla_data(data[IFLA_CAN_CTRLMODE]); | |
547 | priv->ctrlmode &= ~cm->mask; | |
548 | priv->ctrlmode |= cm->flags; | |
549 | } | |
550 | ||
551 | if (data[IFLA_CAN_BITTIMING]) { | |
552 | struct can_bittiming bt; | |
553 | ||
554 | /* Do not allow changing bittiming while running */ | |
555 | if (dev->flags & IFF_UP) | |
556 | return -EBUSY; | |
557 | memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); | |
558 | if ((!bt.bitrate && !bt.tq) || (bt.bitrate && bt.tq)) | |
559 | return -EINVAL; | |
560 | err = can_get_bittiming(dev, &bt); | |
561 | if (err) | |
562 | return err; | |
563 | memcpy(&priv->bittiming, &bt, sizeof(bt)); | |
564 | ||
565 | if (priv->do_set_bittiming) { | |
566 | /* Finally, set the bit-timing registers */ | |
567 | err = priv->do_set_bittiming(dev); | |
568 | if (err) | |
569 | return err; | |
570 | } | |
571 | } | |
572 | ||
573 | if (data[IFLA_CAN_RESTART_MS]) { | |
574 | /* Do not allow changing restart delay while running */ | |
575 | if (dev->flags & IFF_UP) | |
576 | return -EBUSY; | |
577 | priv->restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]); | |
578 | } | |
579 | ||
580 | if (data[IFLA_CAN_RESTART]) { | |
581 | /* Do not allow a restart while not running */ | |
582 | if (!(dev->flags & IFF_UP)) | |
583 | return -EINVAL; | |
584 | err = can_restart_now(dev); | |
585 | if (err) | |
586 | return err; | |
587 | } | |
588 | ||
589 | return 0; | |
590 | } | |
591 | ||
592 | static int can_fill_info(struct sk_buff *skb, const struct net_device *dev) | |
593 | { | |
594 | struct can_priv *priv = netdev_priv(dev); | |
595 | struct can_ctrlmode cm = {.flags = priv->ctrlmode}; | |
596 | enum can_state state = priv->state; | |
597 | ||
598 | if (priv->do_get_state) | |
599 | priv->do_get_state(dev, &state); | |
600 | NLA_PUT_U32(skb, IFLA_CAN_STATE, state); | |
601 | NLA_PUT(skb, IFLA_CAN_CTRLMODE, sizeof(cm), &cm); | |
602 | NLA_PUT_U32(skb, IFLA_CAN_RESTART_MS, priv->restart_ms); | |
603 | NLA_PUT(skb, IFLA_CAN_BITTIMING, | |
604 | sizeof(priv->bittiming), &priv->bittiming); | |
605 | NLA_PUT(skb, IFLA_CAN_CLOCK, sizeof(cm), &priv->clock); | |
606 | if (priv->bittiming_const) | |
607 | NLA_PUT(skb, IFLA_CAN_BITTIMING_CONST, | |
608 | sizeof(*priv->bittiming_const), priv->bittiming_const); | |
609 | ||
610 | return 0; | |
611 | ||
612 | nla_put_failure: | |
613 | return -EMSGSIZE; | |
614 | } | |
615 | ||
616 | static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev) | |
617 | { | |
618 | struct can_priv *priv = netdev_priv(dev); | |
619 | ||
620 | NLA_PUT(skb, IFLA_INFO_XSTATS, | |
621 | sizeof(priv->can_stats), &priv->can_stats); | |
622 | ||
623 | return 0; | |
624 | ||
625 | nla_put_failure: | |
626 | return -EMSGSIZE; | |
627 | } | |
628 | ||
993e6f2f OH |
629 | static int can_newlink(struct net_device *dev, |
630 | struct nlattr *tb[], struct nlattr *data[]) | |
631 | { | |
632 | return -EOPNOTSUPP; | |
633 | } | |
634 | ||
39549eef WG |
635 | static struct rtnl_link_ops can_link_ops __read_mostly = { |
636 | .kind = "can", | |
637 | .maxtype = IFLA_CAN_MAX, | |
638 | .policy = can_policy, | |
639 | .setup = can_setup, | |
993e6f2f | 640 | .newlink = can_newlink, |
39549eef WG |
641 | .changelink = can_changelink, |
642 | .fill_info = can_fill_info, | |
643 | .fill_xstats = can_fill_xstats, | |
644 | }; | |
645 | ||
646 | /* | |
647 | * Register the CAN network device | |
648 | */ | |
649 | int register_candev(struct net_device *dev) | |
650 | { | |
651 | dev->rtnl_link_ops = &can_link_ops; | |
652 | return register_netdev(dev); | |
653 | } | |
654 | EXPORT_SYMBOL_GPL(register_candev); | |
655 | ||
656 | /* | |
657 | * Unregister the CAN network device | |
658 | */ | |
659 | void unregister_candev(struct net_device *dev) | |
660 | { | |
661 | unregister_netdev(dev); | |
662 | } | |
663 | EXPORT_SYMBOL_GPL(unregister_candev); | |
664 | ||
665 | static __init int can_dev_init(void) | |
666 | { | |
667 | int err; | |
668 | ||
669 | err = rtnl_link_register(&can_link_ops); | |
670 | if (!err) | |
671 | printk(KERN_INFO MOD_DESC "\n"); | |
672 | ||
673 | return err; | |
674 | } | |
675 | module_init(can_dev_init); | |
676 | ||
677 | static __exit void can_dev_exit(void) | |
678 | { | |
679 | rtnl_link_unregister(&can_link_ops); | |
680 | } | |
681 | module_exit(can_dev_exit); | |
682 | ||
683 | MODULE_ALIAS_RTNL_LINK("can"); |