Commit | Line | Data |
---|---|---|
e190d6b1 | 1 | /* |
2fb9d6f5 | 2 | * Blackfin On-Chip MAC Driver |
e190d6b1 | 3 | * |
2fb9d6f5 | 4 | * Copyright 2004-2007 Analog Devices Inc. |
e190d6b1 | 5 | * |
2fb9d6f5 | 6 | * Enter bugs at http://blackfin.uclinux.org/ |
e190d6b1 | 7 | * |
2fb9d6f5 | 8 | * Licensed under the GPL-2 or later. |
e190d6b1 BW |
9 | */ |
10 | ||
11 | #include <linux/init.h> | |
12 | #include <linux/module.h> | |
13 | #include <linux/kernel.h> | |
14 | #include <linux/sched.h> | |
15 | #include <linux/slab.h> | |
16 | #include <linux/delay.h> | |
17 | #include <linux/timer.h> | |
18 | #include <linux/errno.h> | |
19 | #include <linux/irq.h> | |
20 | #include <linux/io.h> | |
21 | #include <linux/ioport.h> | |
22 | #include <linux/crc32.h> | |
23 | #include <linux/device.h> | |
24 | #include <linux/spinlock.h> | |
25 | #include <linux/ethtool.h> | |
26 | #include <linux/mii.h> | |
4ae5a3ad | 27 | #include <linux/phy.h> |
e190d6b1 BW |
28 | #include <linux/netdevice.h> |
29 | #include <linux/etherdevice.h> | |
30 | #include <linux/skbuff.h> | |
e190d6b1 | 31 | #include <linux/platform_device.h> |
e190d6b1 BW |
32 | |
33 | #include <asm/dma.h> | |
34 | #include <linux/dma-mapping.h> | |
35 | ||
36 | #include <asm/blackfin.h> | |
37 | #include <asm/cacheflush.h> | |
38 | #include <asm/portmux.h> | |
39 | ||
40 | #include "bfin_mac.h" | |
41 | ||
42 | #define DRV_NAME "bfin_mac" | |
43 | #define DRV_VERSION "1.1" | |
44 | #define DRV_AUTHOR "Bryan Wu, Luke Yang" | |
45 | #define DRV_DESC "Blackfin BF53[67] on-chip Ethernet MAC driver" | |
46 | ||
47 | MODULE_AUTHOR(DRV_AUTHOR); | |
48 | MODULE_LICENSE("GPL"); | |
49 | MODULE_DESCRIPTION(DRV_DESC); | |
50 | ||
51 | #if defined(CONFIG_BFIN_MAC_USE_L1) | |
52 | # define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size) | |
53 | # define bfin_mac_free(dma_handle, ptr) l1_data_sram_free(ptr) | |
54 | #else | |
55 | # define bfin_mac_alloc(dma_handle, size) \ | |
56 | dma_alloc_coherent(NULL, size, dma_handle, GFP_KERNEL) | |
57 | # define bfin_mac_free(dma_handle, ptr) \ | |
58 | dma_free_coherent(NULL, sizeof(*ptr), ptr, dma_handle) | |
59 | #endif | |
60 | ||
61 | #define PKT_BUF_SZ 1580 | |
62 | ||
63 | #define MAX_TIMEOUT_CNT 500 | |
64 | ||
65 | /* pointers to maintain transmit list */ | |
66 | static struct net_dma_desc_tx *tx_list_head; | |
67 | static struct net_dma_desc_tx *tx_list_tail; | |
68 | static struct net_dma_desc_rx *rx_list_head; | |
69 | static struct net_dma_desc_rx *rx_list_tail; | |
70 | static struct net_dma_desc_rx *current_rx_ptr; | |
71 | static struct net_dma_desc_tx *current_tx_ptr; | |
72 | static struct net_dma_desc_tx *tx_desc; | |
73 | static struct net_dma_desc_rx *rx_desc; | |
74 | ||
4ae5a3ad BW |
75 | static void bf537mac_disable(void); |
76 | static void bf537mac_enable(void); | |
77 | ||
e190d6b1 BW |
78 | static void desc_list_free(void) |
79 | { | |
80 | struct net_dma_desc_rx *r; | |
81 | struct net_dma_desc_tx *t; | |
82 | int i; | |
83 | #if !defined(CONFIG_BFIN_MAC_USE_L1) | |
84 | dma_addr_t dma_handle = 0; | |
85 | #endif | |
86 | ||
87 | if (tx_desc) { | |
88 | t = tx_list_head; | |
89 | for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) { | |
90 | if (t) { | |
91 | if (t->skb) { | |
92 | dev_kfree_skb(t->skb); | |
93 | t->skb = NULL; | |
94 | } | |
95 | t = t->next; | |
96 | } | |
97 | } | |
98 | bfin_mac_free(dma_handle, tx_desc); | |
99 | } | |
100 | ||
101 | if (rx_desc) { | |
102 | r = rx_list_head; | |
103 | for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) { | |
104 | if (r) { | |
105 | if (r->skb) { | |
106 | dev_kfree_skb(r->skb); | |
107 | r->skb = NULL; | |
108 | } | |
109 | r = r->next; | |
110 | } | |
111 | } | |
112 | bfin_mac_free(dma_handle, rx_desc); | |
113 | } | |
114 | } | |
115 | ||
116 | static int desc_list_init(void) | |
117 | { | |
118 | int i; | |
119 | struct sk_buff *new_skb; | |
120 | #if !defined(CONFIG_BFIN_MAC_USE_L1) | |
121 | /* | |
122 | * This dma_handle is useless in Blackfin dma_alloc_coherent(). | |
123 | * The real dma handler is the return value of dma_alloc_coherent(). | |
124 | */ | |
125 | dma_addr_t dma_handle; | |
126 | #endif | |
127 | ||
128 | tx_desc = bfin_mac_alloc(&dma_handle, | |
129 | sizeof(struct net_dma_desc_tx) * | |
130 | CONFIG_BFIN_TX_DESC_NUM); | |
131 | if (tx_desc == NULL) | |
132 | goto init_error; | |
133 | ||
134 | rx_desc = bfin_mac_alloc(&dma_handle, | |
135 | sizeof(struct net_dma_desc_rx) * | |
136 | CONFIG_BFIN_RX_DESC_NUM); | |
137 | if (rx_desc == NULL) | |
138 | goto init_error; | |
139 | ||
140 | /* init tx_list */ | |
141 | tx_list_head = tx_list_tail = tx_desc; | |
142 | ||
143 | for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) { | |
144 | struct net_dma_desc_tx *t = tx_desc + i; | |
145 | struct dma_descriptor *a = &(t->desc_a); | |
146 | struct dma_descriptor *b = &(t->desc_b); | |
147 | ||
148 | /* | |
149 | * disable DMA | |
150 | * read from memory WNR = 0 | |
151 | * wordsize is 32 bits | |
152 | * 6 half words is desc size | |
153 | * large desc flow | |
154 | */ | |
155 | a->config = WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; | |
156 | a->start_addr = (unsigned long)t->packet; | |
157 | a->x_count = 0; | |
158 | a->next_dma_desc = b; | |
159 | ||
160 | /* | |
161 | * enabled DMA | |
162 | * write to memory WNR = 1 | |
163 | * wordsize is 32 bits | |
164 | * disable interrupt | |
165 | * 6 half words is desc size | |
166 | * large desc flow | |
167 | */ | |
168 | b->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; | |
169 | b->start_addr = (unsigned long)(&(t->status)); | |
170 | b->x_count = 0; | |
171 | ||
172 | t->skb = NULL; | |
173 | tx_list_tail->desc_b.next_dma_desc = a; | |
174 | tx_list_tail->next = t; | |
175 | tx_list_tail = t; | |
176 | } | |
177 | tx_list_tail->next = tx_list_head; /* tx_list is a circle */ | |
178 | tx_list_tail->desc_b.next_dma_desc = &(tx_list_head->desc_a); | |
179 | current_tx_ptr = tx_list_head; | |
180 | ||
181 | /* init rx_list */ | |
182 | rx_list_head = rx_list_tail = rx_desc; | |
183 | ||
184 | for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) { | |
185 | struct net_dma_desc_rx *r = rx_desc + i; | |
186 | struct dma_descriptor *a = &(r->desc_a); | |
187 | struct dma_descriptor *b = &(r->desc_b); | |
188 | ||
189 | /* allocate a new skb for next time receive */ | |
190 | new_skb = dev_alloc_skb(PKT_BUF_SZ + 2); | |
191 | if (!new_skb) { | |
192 | printk(KERN_NOTICE DRV_NAME | |
193 | ": init: low on mem - packet dropped\n"); | |
194 | goto init_error; | |
195 | } | |
196 | skb_reserve(new_skb, 2); | |
197 | r->skb = new_skb; | |
198 | ||
199 | /* | |
200 | * enabled DMA | |
201 | * write to memory WNR = 1 | |
202 | * wordsize is 32 bits | |
203 | * disable interrupt | |
204 | * 6 half words is desc size | |
205 | * large desc flow | |
206 | */ | |
207 | a->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; | |
208 | /* since RXDWA is enabled */ | |
209 | a->start_addr = (unsigned long)new_skb->data - 2; | |
210 | a->x_count = 0; | |
211 | a->next_dma_desc = b; | |
212 | ||
213 | /* | |
214 | * enabled DMA | |
215 | * write to memory WNR = 1 | |
216 | * wordsize is 32 bits | |
217 | * enable interrupt | |
218 | * 6 half words is desc size | |
219 | * large desc flow | |
220 | */ | |
221 | b->config = DMAEN | WNR | WDSIZE_32 | DI_EN | | |
222 | NDSIZE_6 | DMAFLOW_LARGE; | |
223 | b->start_addr = (unsigned long)(&(r->status)); | |
224 | b->x_count = 0; | |
225 | ||
226 | rx_list_tail->desc_b.next_dma_desc = a; | |
227 | rx_list_tail->next = r; | |
228 | rx_list_tail = r; | |
229 | } | |
230 | rx_list_tail->next = rx_list_head; /* rx_list is a circle */ | |
231 | rx_list_tail->desc_b.next_dma_desc = &(rx_list_head->desc_a); | |
232 | current_rx_ptr = rx_list_head; | |
233 | ||
234 | return 0; | |
235 | ||
236 | init_error: | |
237 | desc_list_free(); | |
238 | printk(KERN_ERR DRV_NAME ": kmalloc failed\n"); | |
239 | return -ENOMEM; | |
240 | } | |
241 | ||
242 | ||
243 | /*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/ | |
244 | ||
245 | /* Set FER regs to MUX in Ethernet pins */ | |
246 | static int setup_pin_mux(int action) | |
247 | { | |
248 | #if defined(CONFIG_BFIN_MAC_RMII) | |
249 | u16 pin_req[] = P_RMII0; | |
250 | #else | |
251 | u16 pin_req[] = P_MII0; | |
252 | #endif | |
253 | ||
254 | if (action) { | |
255 | if (peripheral_request_list(pin_req, DRV_NAME)) { | |
256 | printk(KERN_ERR DRV_NAME | |
257 | ": Requesting Peripherals failed\n"); | |
258 | return -EFAULT; | |
259 | } | |
260 | } else | |
261 | peripheral_free_list(pin_req); | |
262 | ||
263 | return 0; | |
264 | } | |
265 | ||
4ae5a3ad BW |
266 | /* |
267 | * MII operations | |
268 | */ | |
e190d6b1 | 269 | /* Wait until the previous MDC/MDIO transaction has completed */ |
4ae5a3ad | 270 | static void mdio_poll(void) |
e190d6b1 BW |
271 | { |
272 | int timeout_cnt = MAX_TIMEOUT_CNT; | |
273 | ||
274 | /* poll the STABUSY bit */ | |
275 | while ((bfin_read_EMAC_STAADD()) & STABUSY) { | |
6db9e461 | 276 | udelay(1); |
e190d6b1 BW |
277 | if (timeout_cnt-- < 0) { |
278 | printk(KERN_ERR DRV_NAME | |
279 | ": wait MDC/MDIO transaction to complete timeout\n"); | |
280 | break; | |
281 | } | |
282 | } | |
283 | } | |
284 | ||
285 | /* Read an off-chip register in a PHY through the MDC/MDIO port */ | |
4ae5a3ad | 286 | static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) |
e190d6b1 | 287 | { |
4ae5a3ad BW |
288 | mdio_poll(); |
289 | ||
e190d6b1 | 290 | /* read mode */ |
4ae5a3ad BW |
291 | bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) | |
292 | SET_REGAD((u16) regnum) | | |
e190d6b1 | 293 | STABUSY); |
e190d6b1 | 294 | |
4ae5a3ad BW |
295 | mdio_poll(); |
296 | ||
297 | return (int) bfin_read_EMAC_STADAT(); | |
e190d6b1 BW |
298 | } |
299 | ||
300 | /* Write an off-chip register in a PHY through the MDC/MDIO port */ | |
4ae5a3ad BW |
301 | static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, |
302 | u16 value) | |
e190d6b1 | 303 | { |
4ae5a3ad BW |
304 | mdio_poll(); |
305 | ||
306 | bfin_write_EMAC_STADAT((u32) value); | |
e190d6b1 BW |
307 | |
308 | /* write mode */ | |
4ae5a3ad BW |
309 | bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) | |
310 | SET_REGAD((u16) regnum) | | |
e190d6b1 BW |
311 | STAOP | |
312 | STABUSY); | |
313 | ||
4ae5a3ad BW |
314 | mdio_poll(); |
315 | ||
316 | return 0; | |
e190d6b1 BW |
317 | } |
318 | ||
4ae5a3ad | 319 | static int mdiobus_reset(struct mii_bus *bus) |
e190d6b1 | 320 | { |
4ae5a3ad | 321 | return 0; |
e190d6b1 BW |
322 | } |
323 | ||
4ae5a3ad | 324 | static void bf537_adjust_link(struct net_device *dev) |
e190d6b1 | 325 | { |
e190d6b1 | 326 | struct bf537mac_local *lp = netdev_priv(dev); |
4ae5a3ad BW |
327 | struct phy_device *phydev = lp->phydev; |
328 | unsigned long flags; | |
329 | int new_state = 0; | |
330 | ||
331 | spin_lock_irqsave(&lp->lock, flags); | |
332 | if (phydev->link) { | |
333 | /* Now we make sure that we can be in full duplex mode. | |
334 | * If not, we operate in half-duplex mode. */ | |
335 | if (phydev->duplex != lp->old_duplex) { | |
336 | u32 opmode = bfin_read_EMAC_OPMODE(); | |
337 | new_state = 1; | |
338 | ||
339 | if (phydev->duplex) | |
340 | opmode |= FDMODE; | |
341 | else | |
342 | opmode &= ~(FDMODE); | |
343 | ||
344 | bfin_write_EMAC_OPMODE(opmode); | |
345 | lp->old_duplex = phydev->duplex; | |
346 | } | |
e190d6b1 | 347 | |
4ae5a3ad BW |
348 | if (phydev->speed != lp->old_speed) { |
349 | #if defined(CONFIG_BFIN_MAC_RMII) | |
350 | u32 opmode = bfin_read_EMAC_OPMODE(); | |
4ae5a3ad BW |
351 | switch (phydev->speed) { |
352 | case 10: | |
353 | opmode |= RMII_10; | |
354 | break; | |
355 | case 100: | |
356 | opmode &= ~(RMII_10); | |
357 | break; | |
358 | default: | |
359 | printk(KERN_WARNING | |
360 | "%s: Ack! Speed (%d) is not 10/100!\n", | |
361 | DRV_NAME, phydev->speed); | |
362 | break; | |
363 | } | |
364 | bfin_write_EMAC_OPMODE(opmode); | |
4ae5a3ad | 365 | #endif |
e190d6b1 | 366 | |
4ae5a3ad BW |
367 | new_state = 1; |
368 | lp->old_speed = phydev->speed; | |
369 | } | |
e190d6b1 | 370 | |
4ae5a3ad BW |
371 | if (!lp->old_link) { |
372 | new_state = 1; | |
373 | lp->old_link = 1; | |
374 | netif_schedule(dev); | |
375 | } | |
376 | } else if (lp->old_link) { | |
377 | new_state = 1; | |
378 | lp->old_link = 0; | |
379 | lp->old_speed = 0; | |
380 | lp->old_duplex = -1; | |
e190d6b1 BW |
381 | } |
382 | ||
4ae5a3ad BW |
383 | if (new_state) { |
384 | u32 opmode = bfin_read_EMAC_OPMODE(); | |
385 | phy_print_status(phydev); | |
386 | pr_debug("EMAC_OPMODE = 0x%08x\n", opmode); | |
e190d6b1 | 387 | } |
4ae5a3ad BW |
388 | |
389 | spin_unlock_irqrestore(&lp->lock, flags); | |
e190d6b1 BW |
390 | } |
391 | ||
7cc8f381 BW |
392 | /* MDC = 2.5 MHz */ |
393 | #define MDC_CLK 2500000 | |
394 | ||
4ae5a3ad | 395 | static int mii_probe(struct net_device *dev) |
e190d6b1 | 396 | { |
e190d6b1 | 397 | struct bf537mac_local *lp = netdev_priv(dev); |
4ae5a3ad BW |
398 | struct phy_device *phydev = NULL; |
399 | unsigned short sysctl; | |
400 | int i; | |
7cc8f381 | 401 | u32 sclk, mdc_div; |
e190d6b1 | 402 | |
4ae5a3ad | 403 | /* Enable PHY output early */ |
e190d6b1 BW |
404 | if (!(bfin_read_VR_CTL() & PHYCLKOE)) |
405 | bfin_write_VR_CTL(bfin_read_VR_CTL() | PHYCLKOE); | |
406 | ||
7cc8f381 BW |
407 | sclk = get_sclk(); |
408 | mdc_div = ((sclk / MDC_CLK) / 2) - 1; | |
409 | ||
4ae5a3ad | 410 | sysctl = bfin_read_EMAC_SYSCTL(); |
7cc8f381 | 411 | sysctl |= SET_MDCDIV(mdc_div); |
e190d6b1 | 412 | bfin_write_EMAC_SYSCTL(sysctl); |
e190d6b1 | 413 | |
4ae5a3ad BW |
414 | /* search for connect PHY device */ |
415 | for (i = 0; i < PHY_MAX_ADDR; i++) { | |
416 | struct phy_device *const tmp_phydev = lp->mii_bus.phy_map[i]; | |
e190d6b1 | 417 | |
4ae5a3ad BW |
418 | if (!tmp_phydev) |
419 | continue; /* no PHY here... */ | |
e190d6b1 | 420 | |
4ae5a3ad BW |
421 | phydev = tmp_phydev; |
422 | break; /* found it */ | |
423 | } | |
424 | ||
425 | /* now we are supposed to have a proper phydev, to attach to... */ | |
426 | if (!phydev) { | |
427 | printk(KERN_INFO "%s: Don't found any phy device at all\n", | |
428 | dev->name); | |
429 | return -ENODEV; | |
e190d6b1 BW |
430 | } |
431 | ||
432 | #if defined(CONFIG_BFIN_MAC_RMII) | |
4ae5a3ad BW |
433 | phydev = phy_connect(dev, phydev->dev.bus_id, &bf537_adjust_link, 0, |
434 | PHY_INTERFACE_MODE_RMII); | |
435 | #else | |
436 | phydev = phy_connect(dev, phydev->dev.bus_id, &bf537_adjust_link, 0, | |
437 | PHY_INTERFACE_MODE_MII); | |
e190d6b1 BW |
438 | #endif |
439 | ||
4ae5a3ad BW |
440 | if (IS_ERR(phydev)) { |
441 | printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); | |
442 | return PTR_ERR(phydev); | |
443 | } | |
444 | ||
445 | /* mask with MAC supported features */ | |
446 | phydev->supported &= (SUPPORTED_10baseT_Half | |
447 | | SUPPORTED_10baseT_Full | |
448 | | SUPPORTED_100baseT_Half | |
449 | | SUPPORTED_100baseT_Full | |
450 | | SUPPORTED_Autoneg | |
451 | | SUPPORTED_Pause | SUPPORTED_Asym_Pause | |
452 | | SUPPORTED_MII | |
453 | | SUPPORTED_TP); | |
454 | ||
455 | phydev->advertising = phydev->supported; | |
456 | ||
457 | lp->old_link = 0; | |
458 | lp->old_speed = 0; | |
459 | lp->old_duplex = -1; | |
460 | lp->phydev = phydev; | |
461 | ||
462 | printk(KERN_INFO "%s: attached PHY driver [%s] " | |
7cc8f381 BW |
463 | "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)" |
464 | "@sclk=%dMHz)\n", | |
465 | DRV_NAME, phydev->drv->name, phydev->dev.bus_id, phydev->irq, | |
466 | MDC_CLK, mdc_div, sclk/1000000); | |
4ae5a3ad BW |
467 | |
468 | return 0; | |
469 | } | |
470 | ||
471 | /**************************************************************************/ | |
472 | void setup_system_regs(struct net_device *dev) | |
473 | { | |
474 | unsigned short sysctl; | |
475 | ||
476 | /* | |
477 | * Odd word alignment for Receive Frame DMA word | |
478 | * Configure checksum support and rcve frame word alignment | |
479 | */ | |
480 | sysctl = bfin_read_EMAC_SYSCTL(); | |
481 | #if defined(BFIN_MAC_CSUM_OFFLOAD) | |
482 | sysctl |= RXDWA | RXCKS; | |
483 | #else | |
484 | sysctl |= RXDWA; | |
485 | #endif | |
486 | bfin_write_EMAC_SYSCTL(sysctl); | |
e190d6b1 BW |
487 | |
488 | bfin_write_EMAC_MMC_CTL(RSTC | CROLL); | |
489 | ||
490 | /* Initialize the TX DMA channel registers */ | |
491 | bfin_write_DMA2_X_COUNT(0); | |
492 | bfin_write_DMA2_X_MODIFY(4); | |
493 | bfin_write_DMA2_Y_COUNT(0); | |
494 | bfin_write_DMA2_Y_MODIFY(0); | |
495 | ||
496 | /* Initialize the RX DMA channel registers */ | |
497 | bfin_write_DMA1_X_COUNT(0); | |
498 | bfin_write_DMA1_X_MODIFY(4); | |
499 | bfin_write_DMA1_Y_COUNT(0); | |
500 | bfin_write_DMA1_Y_MODIFY(0); | |
501 | } | |
502 | ||
73f83182 | 503 | static void setup_mac_addr(u8 *mac_addr) |
e190d6b1 BW |
504 | { |
505 | u32 addr_low = le32_to_cpu(*(__le32 *) & mac_addr[0]); | |
506 | u16 addr_hi = le16_to_cpu(*(__le16 *) & mac_addr[4]); | |
507 | ||
508 | /* this depends on a little-endian machine */ | |
509 | bfin_write_EMAC_ADDRLO(addr_low); | |
510 | bfin_write_EMAC_ADDRHI(addr_hi); | |
511 | } | |
512 | ||
73f83182 AL |
513 | static int bf537mac_set_mac_address(struct net_device *dev, void *p) |
514 | { | |
515 | struct sockaddr *addr = p; | |
516 | if (netif_running(dev)) | |
517 | return -EBUSY; | |
518 | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | |
519 | setup_mac_addr(dev->dev_addr); | |
520 | return 0; | |
521 | } | |
522 | ||
e190d6b1 BW |
523 | static void adjust_tx_list(void) |
524 | { | |
525 | int timeout_cnt = MAX_TIMEOUT_CNT; | |
526 | ||
527 | if (tx_list_head->status.status_word != 0 | |
528 | && current_tx_ptr != tx_list_head) { | |
529 | goto adjust_head; /* released something, just return; */ | |
530 | } | |
531 | ||
532 | /* | |
533 | * if nothing released, check wait condition | |
534 | * current's next can not be the head, | |
535 | * otherwise the dma will not stop as we want | |
536 | */ | |
537 | if (current_tx_ptr->next->next == tx_list_head) { | |
538 | while (tx_list_head->status.status_word == 0) { | |
6db9e461 | 539 | mdelay(1); |
e190d6b1 BW |
540 | if (tx_list_head->status.status_word != 0 |
541 | || !(bfin_read_DMA2_IRQ_STATUS() & 0x08)) { | |
542 | goto adjust_head; | |
543 | } | |
544 | if (timeout_cnt-- < 0) { | |
545 | printk(KERN_ERR DRV_NAME | |
546 | ": wait for adjust tx list head timeout\n"); | |
547 | break; | |
548 | } | |
549 | } | |
550 | if (tx_list_head->status.status_word != 0) { | |
551 | goto adjust_head; | |
552 | } | |
553 | } | |
554 | ||
555 | return; | |
556 | ||
557 | adjust_head: | |
558 | do { | |
559 | tx_list_head->desc_a.config &= ~DMAEN; | |
560 | tx_list_head->status.status_word = 0; | |
561 | if (tx_list_head->skb) { | |
562 | dev_kfree_skb(tx_list_head->skb); | |
563 | tx_list_head->skb = NULL; | |
564 | } else { | |
565 | printk(KERN_ERR DRV_NAME | |
566 | ": no sk_buff in a transmitted frame!\n"); | |
567 | } | |
568 | tx_list_head = tx_list_head->next; | |
569 | } while (tx_list_head->status.status_word != 0 | |
570 | && current_tx_ptr != tx_list_head); | |
571 | return; | |
572 | ||
573 | } | |
574 | ||
575 | static int bf537mac_hard_start_xmit(struct sk_buff *skb, | |
576 | struct net_device *dev) | |
577 | { | |
578 | struct bf537mac_local *lp = netdev_priv(dev); | |
579 | unsigned int data; | |
580 | ||
581 | current_tx_ptr->skb = skb; | |
582 | ||
583 | /* | |
584 | * Is skb->data always 16-bit aligned? | |
585 | * Do we need to memcpy((char *)(tail->packet + 2), skb->data, len)? | |
586 | */ | |
587 | if ((((unsigned int)(skb->data)) & 0x02) == 2) { | |
588 | /* move skb->data to current_tx_ptr payload */ | |
589 | data = (unsigned int)(skb->data) - 2; | |
590 | *((unsigned short *)data) = (unsigned short)(skb->len); | |
591 | current_tx_ptr->desc_a.start_addr = (unsigned long)data; | |
592 | /* this is important! */ | |
593 | blackfin_dcache_flush_range(data, (data + (skb->len)) + 2); | |
594 | ||
595 | } else { | |
596 | *((unsigned short *)(current_tx_ptr->packet)) = | |
597 | (unsigned short)(skb->len); | |
598 | memcpy((char *)(current_tx_ptr->packet + 2), skb->data, | |
599 | (skb->len)); | |
600 | current_tx_ptr->desc_a.start_addr = | |
601 | (unsigned long)current_tx_ptr->packet; | |
602 | if (current_tx_ptr->status.status_word != 0) | |
603 | current_tx_ptr->status.status_word = 0; | |
604 | blackfin_dcache_flush_range((unsigned int)current_tx_ptr-> | |
605 | packet, | |
606 | (unsigned int)(current_tx_ptr-> | |
607 | packet + skb->len) + | |
608 | 2); | |
609 | } | |
610 | ||
611 | /* enable this packet's dma */ | |
612 | current_tx_ptr->desc_a.config |= DMAEN; | |
613 | ||
614 | /* tx dma is running, just return */ | |
615 | if (bfin_read_DMA2_IRQ_STATUS() & 0x08) | |
616 | goto out; | |
617 | ||
618 | /* tx dma is not running */ | |
619 | bfin_write_DMA2_NEXT_DESC_PTR(&(current_tx_ptr->desc_a)); | |
620 | /* dma enabled, read from memory, size is 6 */ | |
621 | bfin_write_DMA2_CONFIG(current_tx_ptr->desc_a.config); | |
622 | /* Turn on the EMAC tx */ | |
623 | bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE); | |
624 | ||
625 | out: | |
626 | adjust_tx_list(); | |
627 | current_tx_ptr = current_tx_ptr->next; | |
628 | dev->trans_start = jiffies; | |
09f75cd7 JG |
629 | dev->stats.tx_packets++; |
630 | dev->stats.tx_bytes += (skb->len); | |
e190d6b1 BW |
631 | return 0; |
632 | } | |
633 | ||
634 | static void bf537mac_rx(struct net_device *dev) | |
635 | { | |
636 | struct sk_buff *skb, *new_skb; | |
637 | struct bf537mac_local *lp = netdev_priv(dev); | |
638 | unsigned short len; | |
639 | ||
640 | /* allocate a new skb for next time receive */ | |
641 | skb = current_rx_ptr->skb; | |
642 | new_skb = dev_alloc_skb(PKT_BUF_SZ + 2); | |
643 | if (!new_skb) { | |
644 | printk(KERN_NOTICE DRV_NAME | |
645 | ": rx: low on mem - packet dropped\n"); | |
09f75cd7 | 646 | dev->stats.rx_dropped++; |
e190d6b1 BW |
647 | goto out; |
648 | } | |
649 | /* reserve 2 bytes for RXDWA padding */ | |
650 | skb_reserve(new_skb, 2); | |
651 | current_rx_ptr->skb = new_skb; | |
652 | current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2; | |
653 | ||
654 | len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN); | |
655 | skb_put(skb, len); | |
656 | blackfin_dcache_invalidate_range((unsigned long)skb->head, | |
657 | (unsigned long)skb->tail); | |
658 | ||
659 | dev->last_rx = jiffies; | |
660 | skb->dev = dev; | |
661 | skb->protocol = eth_type_trans(skb, dev); | |
662 | #if defined(BFIN_MAC_CSUM_OFFLOAD) | |
663 | skb->csum = current_rx_ptr->status.ip_payload_csum; | |
00ff49a9 | 664 | skb->ip_summed = CHECKSUM_COMPLETE; |
e190d6b1 BW |
665 | #endif |
666 | ||
667 | netif_rx(skb); | |
09f75cd7 JG |
668 | dev->stats.rx_packets++; |
669 | dev->stats.rx_bytes += len; | |
e190d6b1 BW |
670 | current_rx_ptr->status.status_word = 0x00000000; |
671 | current_rx_ptr = current_rx_ptr->next; | |
672 | ||
673 | out: | |
674 | return; | |
675 | } | |
676 | ||
677 | /* interrupt routine to handle rx and error signal */ | |
678 | static irqreturn_t bf537mac_interrupt(int irq, void *dev_id) | |
679 | { | |
680 | struct net_device *dev = dev_id; | |
681 | int number = 0; | |
682 | ||
683 | get_one_packet: | |
684 | if (current_rx_ptr->status.status_word == 0) { | |
685 | /* no more new packet received */ | |
686 | if (number == 0) { | |
687 | if (current_rx_ptr->next->status.status_word != 0) { | |
688 | current_rx_ptr = current_rx_ptr->next; | |
689 | goto real_rx; | |
690 | } | |
691 | } | |
692 | bfin_write_DMA1_IRQ_STATUS(bfin_read_DMA1_IRQ_STATUS() | | |
693 | DMA_DONE | DMA_ERR); | |
694 | return IRQ_HANDLED; | |
695 | } | |
696 | ||
697 | real_rx: | |
698 | bf537mac_rx(dev); | |
699 | number++; | |
700 | goto get_one_packet; | |
701 | } | |
702 | ||
703 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
704 | static void bf537mac_poll(struct net_device *dev) | |
705 | { | |
706 | disable_irq(IRQ_MAC_RX); | |
707 | bf537mac_interrupt(IRQ_MAC_RX, dev); | |
708 | enable_irq(IRQ_MAC_RX); | |
709 | } | |
710 | #endif /* CONFIG_NET_POLL_CONTROLLER */ | |
711 | ||
496a34c2 | 712 | static void bf537mac_disable(void) |
e190d6b1 BW |
713 | { |
714 | unsigned int opmode; | |
715 | ||
716 | opmode = bfin_read_EMAC_OPMODE(); | |
717 | opmode &= (~RE); | |
718 | opmode &= (~TE); | |
719 | /* Turn off the EMAC */ | |
720 | bfin_write_EMAC_OPMODE(opmode); | |
721 | } | |
722 | ||
723 | /* | |
724 | * Enable Interrupts, Receive, and Transmit | |
725 | */ | |
4ae5a3ad | 726 | static void bf537mac_enable(void) |
e190d6b1 BW |
727 | { |
728 | u32 opmode; | |
729 | ||
4ae5a3ad | 730 | pr_debug("%s: %s\n", DRV_NAME, __FUNCTION__); |
e190d6b1 BW |
731 | |
732 | /* Set RX DMA */ | |
733 | bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a)); | |
734 | bfin_write_DMA1_CONFIG(rx_list_head->desc_a.config); | |
735 | ||
736 | /* Wait MII done */ | |
4ae5a3ad | 737 | mdio_poll(); |
e190d6b1 BW |
738 | |
739 | /* We enable only RX here */ | |
740 | /* ASTP : Enable Automatic Pad Stripping | |
741 | PR : Promiscuous Mode for test | |
742 | PSF : Receive frames with total length less than 64 bytes. | |
743 | FDMODE : Full Duplex Mode | |
744 | LB : Internal Loopback for test | |
745 | RE : Receiver Enable */ | |
746 | opmode = bfin_read_EMAC_OPMODE(); | |
747 | if (opmode & FDMODE) | |
748 | opmode |= PSF; | |
749 | else | |
750 | opmode |= DRO | DC | PSF; | |
751 | opmode |= RE; | |
752 | ||
753 | #if defined(CONFIG_BFIN_MAC_RMII) | |
754 | opmode |= RMII; /* For Now only 100MBit are supported */ | |
755 | #ifdef CONFIG_BF_REV_0_2 | |
756 | opmode |= TE; | |
757 | #endif | |
758 | #endif | |
759 | /* Turn on the EMAC rx */ | |
760 | bfin_write_EMAC_OPMODE(opmode); | |
e190d6b1 BW |
761 | } |
762 | ||
763 | /* Our watchdog timed out. Called by the networking layer */ | |
764 | static void bf537mac_timeout(struct net_device *dev) | |
765 | { | |
766 | pr_debug("%s: %s\n", dev->name, __FUNCTION__); | |
767 | ||
496a34c2 | 768 | bf537mac_disable(); |
e190d6b1 BW |
769 | |
770 | /* reset tx queue */ | |
771 | tx_list_tail = tx_list_head->next; | |
772 | ||
4ae5a3ad | 773 | bf537mac_enable(); |
e190d6b1 BW |
774 | |
775 | /* We can accept TX packets again */ | |
776 | dev->trans_start = jiffies; | |
777 | netif_wake_queue(dev); | |
778 | } | |
779 | ||
775919bc AW |
780 | static void bf537mac_multicast_hash(struct net_device *dev) |
781 | { | |
782 | u32 emac_hashhi, emac_hashlo; | |
783 | struct dev_mc_list *dmi = dev->mc_list; | |
784 | char *addrs; | |
785 | int i; | |
786 | u32 crc; | |
787 | ||
788 | emac_hashhi = emac_hashlo = 0; | |
789 | ||
790 | for (i = 0; i < dev->mc_count; i++) { | |
791 | addrs = dmi->dmi_addr; | |
792 | dmi = dmi->next; | |
793 | ||
794 | /* skip non-multicast addresses */ | |
795 | if (!(*addrs & 1)) | |
796 | continue; | |
797 | ||
798 | crc = ether_crc(ETH_ALEN, addrs); | |
799 | crc >>= 26; | |
800 | ||
801 | if (crc & 0x20) | |
802 | emac_hashhi |= 1 << (crc & 0x1f); | |
803 | else | |
804 | emac_hashlo |= 1 << (crc & 0x1f); | |
805 | } | |
806 | ||
807 | bfin_write_EMAC_HASHHI(emac_hashhi); | |
808 | bfin_write_EMAC_HASHLO(emac_hashlo); | |
809 | ||
810 | return; | |
811 | } | |
812 | ||
e190d6b1 BW |
813 | /* |
814 | * This routine will, depending on the values passed to it, | |
815 | * either make it accept multicast packets, go into | |
816 | * promiscuous mode (for TCPDUMP and cousins) or accept | |
817 | * a select set of multicast packets | |
818 | */ | |
819 | static void bf537mac_set_multicast_list(struct net_device *dev) | |
820 | { | |
821 | u32 sysctl; | |
822 | ||
823 | if (dev->flags & IFF_PROMISC) { | |
824 | printk(KERN_INFO "%s: set to promisc mode\n", dev->name); | |
825 | sysctl = bfin_read_EMAC_OPMODE(); | |
826 | sysctl |= RAF; | |
827 | bfin_write_EMAC_OPMODE(sysctl); | |
775919bc | 828 | } else if (dev->flags & IFF_ALLMULTI) { |
e190d6b1 BW |
829 | /* accept all multicast */ |
830 | sysctl = bfin_read_EMAC_OPMODE(); | |
831 | sysctl |= PAM; | |
832 | bfin_write_EMAC_OPMODE(sysctl); | |
775919bc AW |
833 | } else if (dev->mc_count) { |
834 | /* set up multicast hash table */ | |
835 | sysctl = bfin_read_EMAC_OPMODE(); | |
836 | sysctl |= HM; | |
837 | bfin_write_EMAC_OPMODE(sysctl); | |
838 | bf537mac_multicast_hash(dev); | |
e190d6b1 BW |
839 | } else { |
840 | /* clear promisc or multicast mode */ | |
841 | sysctl = bfin_read_EMAC_OPMODE(); | |
842 | sysctl &= ~(RAF | PAM); | |
843 | bfin_write_EMAC_OPMODE(sysctl); | |
844 | } | |
845 | } | |
846 | ||
847 | /* | |
848 | * this puts the device in an inactive state | |
849 | */ | |
850 | static void bf537mac_shutdown(struct net_device *dev) | |
851 | { | |
852 | /* Turn off the EMAC */ | |
853 | bfin_write_EMAC_OPMODE(0x00000000); | |
854 | /* Turn off the EMAC RX DMA */ | |
855 | bfin_write_DMA1_CONFIG(0x0000); | |
856 | bfin_write_DMA2_CONFIG(0x0000); | |
857 | } | |
858 | ||
859 | /* | |
860 | * Open and Initialize the interface | |
861 | * | |
862 | * Set up everything, reset the card, etc.. | |
863 | */ | |
864 | static int bf537mac_open(struct net_device *dev) | |
865 | { | |
4ae5a3ad | 866 | struct bf537mac_local *lp = netdev_priv(dev); |
4af4b840 | 867 | int retval; |
e190d6b1 BW |
868 | pr_debug("%s: %s\n", dev->name, __FUNCTION__); |
869 | ||
870 | /* | |
871 | * Check that the address is valid. If its not, refuse | |
872 | * to bring the device up. The user must specify an | |
873 | * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx | |
874 | */ | |
875 | if (!is_valid_ether_addr(dev->dev_addr)) { | |
876 | printk(KERN_WARNING DRV_NAME ": no valid ethernet hw addr\n"); | |
877 | return -EINVAL; | |
878 | } | |
879 | ||
880 | /* initial rx and tx list */ | |
4af4b840 MH |
881 | retval = desc_list_init(); |
882 | ||
883 | if (retval) | |
884 | return retval; | |
e190d6b1 | 885 | |
4ae5a3ad | 886 | phy_start(lp->phydev); |
e190d6b1 | 887 | setup_system_regs(dev); |
496a34c2 | 888 | bf537mac_disable(); |
4ae5a3ad | 889 | bf537mac_enable(); |
e190d6b1 BW |
890 | |
891 | pr_debug("hardware init finished\n"); | |
892 | netif_start_queue(dev); | |
893 | netif_carrier_on(dev); | |
894 | ||
895 | return 0; | |
896 | } | |
897 | ||
898 | /* | |
899 | * | |
900 | * this makes the board clean up everything that it can | |
901 | * and not talk to the outside world. Caused by | |
902 | * an 'ifconfig ethX down' | |
903 | */ | |
904 | static int bf537mac_close(struct net_device *dev) | |
905 | { | |
4ae5a3ad | 906 | struct bf537mac_local *lp = netdev_priv(dev); |
e190d6b1 BW |
907 | pr_debug("%s: %s\n", dev->name, __FUNCTION__); |
908 | ||
909 | netif_stop_queue(dev); | |
910 | netif_carrier_off(dev); | |
911 | ||
4ae5a3ad BW |
912 | phy_stop(lp->phydev); |
913 | ||
e190d6b1 BW |
914 | /* clear everything */ |
915 | bf537mac_shutdown(dev); | |
916 | ||
917 | /* free the rx/tx buffers */ | |
918 | desc_list_free(); | |
919 | ||
920 | return 0; | |
921 | } | |
922 | ||
923 | static int __init bf537mac_probe(struct net_device *dev) | |
924 | { | |
925 | struct bf537mac_local *lp = netdev_priv(dev); | |
926 | int retval; | |
4ae5a3ad | 927 | int i; |
e190d6b1 BW |
928 | |
929 | /* Grab the MAC address in the MAC */ | |
930 | *(__le32 *) (&(dev->dev_addr[0])) = cpu_to_le32(bfin_read_EMAC_ADDRLO()); | |
931 | *(__le16 *) (&(dev->dev_addr[4])) = cpu_to_le16((u16) bfin_read_EMAC_ADDRHI()); | |
932 | ||
933 | /* probe mac */ | |
934 | /*todo: how to proble? which is revision_register */ | |
935 | bfin_write_EMAC_ADDRLO(0x12345678); | |
936 | if (bfin_read_EMAC_ADDRLO() != 0x12345678) { | |
937 | pr_debug("can't detect bf537 mac!\n"); | |
938 | retval = -ENODEV; | |
939 | goto err_out; | |
940 | } | |
941 | ||
942 | /* set the GPIO pins to Ethernet mode */ | |
943 | retval = setup_pin_mux(1); | |
e190d6b1 BW |
944 | if (retval) |
945 | return retval; | |
946 | ||
947 | /*Is it valid? (Did bootloader initialize it?) */ | |
948 | if (!is_valid_ether_addr(dev->dev_addr)) { | |
949 | /* Grab the MAC from the board somehow - this is done in the | |
950 | arch/blackfin/mach-bf537/boards/eth_mac.c */ | |
9862cc52 | 951 | bfin_get_ether_addr(dev->dev_addr); |
e190d6b1 BW |
952 | } |
953 | ||
954 | /* If still not valid, get a random one */ | |
955 | if (!is_valid_ether_addr(dev->dev_addr)) { | |
956 | random_ether_addr(dev->dev_addr); | |
957 | } | |
958 | ||
959 | setup_mac_addr(dev->dev_addr); | |
960 | ||
4ae5a3ad BW |
961 | /* MDIO bus initial */ |
962 | lp->mii_bus.priv = dev; | |
963 | lp->mii_bus.read = mdiobus_read; | |
964 | lp->mii_bus.write = mdiobus_write; | |
965 | lp->mii_bus.reset = mdiobus_reset; | |
966 | lp->mii_bus.name = "bfin_mac_mdio"; | |
967 | lp->mii_bus.id = 0; | |
968 | lp->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL); | |
969 | for (i = 0; i < PHY_MAX_ADDR; ++i) | |
970 | lp->mii_bus.irq[i] = PHY_POLL; | |
971 | ||
972 | mdiobus_register(&lp->mii_bus); | |
973 | ||
974 | retval = mii_probe(dev); | |
975 | if (retval) | |
976 | return retval; | |
977 | ||
e190d6b1 BW |
978 | /* Fill in the fields of the device structure with ethernet values. */ |
979 | ether_setup(dev); | |
980 | ||
981 | dev->open = bf537mac_open; | |
982 | dev->stop = bf537mac_close; | |
983 | dev->hard_start_xmit = bf537mac_hard_start_xmit; | |
73f83182 | 984 | dev->set_mac_address = bf537mac_set_mac_address; |
e190d6b1 | 985 | dev->tx_timeout = bf537mac_timeout; |
e190d6b1 BW |
986 | dev->set_multicast_list = bf537mac_set_multicast_list; |
987 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
988 | dev->poll_controller = bf537mac_poll; | |
989 | #endif | |
990 | ||
e190d6b1 BW |
991 | spin_lock_init(&lp->lock); |
992 | ||
993 | /* now, enable interrupts */ | |
994 | /* register irq handler */ | |
995 | if (request_irq | |
996 | (IRQ_MAC_RX, bf537mac_interrupt, IRQF_DISABLED | IRQF_SHARED, | |
997 | "BFIN537_MAC_RX", dev)) { | |
998 | printk(KERN_WARNING DRV_NAME | |
999 | ": Unable to attach BlackFin MAC RX interrupt\n"); | |
1000 | return -EBUSY; | |
1001 | } | |
1002 | ||
e190d6b1 BW |
1003 | |
1004 | retval = register_netdev(dev); | |
1005 | if (retval == 0) { | |
1006 | /* now, print out the card info, in a short format.. */ | |
1007 | printk(KERN_INFO "%s: Version %s, %s\n", | |
1008 | DRV_NAME, DRV_VERSION, DRV_DESC); | |
1009 | } | |
1010 | ||
1011 | err_out: | |
1012 | return retval; | |
1013 | } | |
1014 | ||
1015 | static int bfin_mac_probe(struct platform_device *pdev) | |
1016 | { | |
1017 | struct net_device *ndev; | |
1018 | ||
1019 | ndev = alloc_etherdev(sizeof(struct bf537mac_local)); | |
1020 | if (!ndev) { | |
1021 | printk(KERN_WARNING DRV_NAME ": could not allocate device\n"); | |
1022 | return -ENOMEM; | |
1023 | } | |
1024 | ||
e190d6b1 BW |
1025 | SET_NETDEV_DEV(ndev, &pdev->dev); |
1026 | ||
1027 | platform_set_drvdata(pdev, ndev); | |
1028 | ||
1029 | if (bf537mac_probe(ndev) != 0) { | |
1030 | platform_set_drvdata(pdev, NULL); | |
1031 | free_netdev(ndev); | |
1032 | printk(KERN_WARNING DRV_NAME ": not found\n"); | |
1033 | return -ENODEV; | |
1034 | } | |
1035 | ||
1036 | return 0; | |
1037 | } | |
1038 | ||
1039 | static int bfin_mac_remove(struct platform_device *pdev) | |
1040 | { | |
1041 | struct net_device *ndev = platform_get_drvdata(pdev); | |
1042 | ||
1043 | platform_set_drvdata(pdev, NULL); | |
1044 | ||
1045 | unregister_netdev(ndev); | |
1046 | ||
1047 | free_irq(IRQ_MAC_RX, ndev); | |
1048 | ||
1049 | free_netdev(ndev); | |
1050 | ||
1051 | setup_pin_mux(0); | |
1052 | ||
1053 | return 0; | |
1054 | } | |
1055 | ||
496a34c2 BW |
1056 | #ifdef CONFIG_PM |
1057 | static int bfin_mac_suspend(struct platform_device *pdev, pm_message_t mesg) | |
e190d6b1 | 1058 | { |
496a34c2 BW |
1059 | struct net_device *net_dev = platform_get_drvdata(pdev); |
1060 | ||
1061 | if (netif_running(net_dev)) | |
1062 | bf537mac_close(net_dev); | |
1063 | ||
e190d6b1 BW |
1064 | return 0; |
1065 | } | |
1066 | ||
1067 | static int bfin_mac_resume(struct platform_device *pdev) | |
1068 | { | |
496a34c2 BW |
1069 | struct net_device *net_dev = platform_get_drvdata(pdev); |
1070 | ||
1071 | if (netif_running(net_dev)) | |
1072 | bf537mac_open(net_dev); | |
1073 | ||
e190d6b1 BW |
1074 | return 0; |
1075 | } | |
496a34c2 BW |
1076 | #else |
1077 | #define bfin_mac_suspend NULL | |
1078 | #define bfin_mac_resume NULL | |
1079 | #endif /* CONFIG_PM */ | |
e190d6b1 BW |
1080 | |
1081 | static struct platform_driver bfin_mac_driver = { | |
1082 | .probe = bfin_mac_probe, | |
1083 | .remove = bfin_mac_remove, | |
1084 | .resume = bfin_mac_resume, | |
1085 | .suspend = bfin_mac_suspend, | |
1086 | .driver = { | |
1087 | .name = DRV_NAME, | |
1088 | }, | |
1089 | }; | |
1090 | ||
1091 | static int __init bfin_mac_init(void) | |
1092 | { | |
1093 | return platform_driver_register(&bfin_mac_driver); | |
1094 | } | |
1095 | ||
1096 | module_init(bfin_mac_init); | |
1097 | ||
1098 | static void __exit bfin_mac_cleanup(void) | |
1099 | { | |
1100 | platform_driver_unregister(&bfin_mac_driver); | |
1101 | } | |
1102 | ||
1103 | module_exit(bfin_mac_cleanup); |