Commit | Line | Data |
---|---|---|
43250ddd JY |
1 | /* |
2 | * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved. | |
3 | * | |
4 | * Derived from Intel e1000 driver | |
5 | * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify it | |
8 | * under the terms of the GNU General Public License as published by the Free | |
9 | * Software Foundation; either version 2 of the License, or (at your option) | |
10 | * any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, but WITHOUT | |
13 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
14 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
15 | * more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License along with | |
18 | * this program; if not, write to the Free Software Foundation, Inc., 59 | |
19 | * Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
20 | */ | |
21 | ||
22 | #ifndef _ATL1C_HW_H_ | |
23 | #define _ATL1C_HW_H_ | |
24 | ||
25 | #include <linux/types.h> | |
26 | #include <linux/mii.h> | |
27 | ||
28 | struct atl1c_adapter; | |
29 | struct atl1c_hw; | |
30 | ||
31 | /* function prototype */ | |
32 | void atl1c_phy_disable(struct atl1c_hw *hw); | |
33 | void atl1c_hw_set_mac_addr(struct atl1c_hw *hw); | |
34 | int atl1c_phy_reset(struct atl1c_hw *hw); | |
35 | int atl1c_read_mac_addr(struct atl1c_hw *hw); | |
36 | int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex); | |
37 | u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr); | |
38 | void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value); | |
39 | int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data); | |
40 | int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data); | |
41 | bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value); | |
42 | int atl1c_phy_init(struct atl1c_hw *hw); | |
43 | int atl1c_check_eeprom_exist(struct atl1c_hw *hw); | |
44 | int atl1c_restart_autoneg(struct atl1c_hw *hw); | |
45 | ||
46 | /* register definition */ | |
47 | #define REG_DEVICE_CAP 0x5C | |
48 | #define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7 | |
49 | #define DEVICE_CAP_MAX_PAYLOAD_SHIFT 0 | |
50 | ||
51 | #define REG_DEVICE_CTRL 0x60 | |
52 | #define DEVICE_CTRL_MAX_PAYLOAD_MASK 0x7 | |
53 | #define DEVICE_CTRL_MAX_PAYLOAD_SHIFT 5 | |
54 | #define DEVICE_CTRL_MAX_RREQ_SZ_MASK 0x7 | |
55 | #define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT 12 | |
56 | ||
57 | #define REG_LINK_CTRL 0x68 | |
58 | #define LINK_CTRL_L0S_EN 0x01 | |
59 | #define LINK_CTRL_L1_EN 0x02 | |
60 | ||
61 | #define REG_VPD_CAP 0x6C | |
62 | #define VPD_CAP_ID_MASK 0xff | |
63 | #define VPD_CAP_ID_SHIFT 0 | |
64 | #define VPD_CAP_NEXT_PTR_MASK 0xFF | |
65 | #define VPD_CAP_NEXT_PTR_SHIFT 8 | |
66 | #define VPD_CAP_VPD_ADDR_MASK 0x7FFF | |
67 | #define VPD_CAP_VPD_ADDR_SHIFT 16 | |
68 | #define VPD_CAP_VPD_FLAG 0x80000000 | |
69 | ||
70 | #define REG_VPD_DATA 0x70 | |
71 | ||
72 | #define REG_PCIE_UC_SEVERITY 0x10C | |
73 | #define PCIE_UC_SERVRITY_TRN 0x00000001 | |
74 | #define PCIE_UC_SERVRITY_DLP 0x00000010 | |
75 | #define PCIE_UC_SERVRITY_PSN_TLP 0x00001000 | |
76 | #define PCIE_UC_SERVRITY_FCP 0x00002000 | |
77 | #define PCIE_UC_SERVRITY_CPL_TO 0x00004000 | |
78 | #define PCIE_UC_SERVRITY_CA 0x00008000 | |
79 | #define PCIE_UC_SERVRITY_UC 0x00010000 | |
80 | #define PCIE_UC_SERVRITY_ROV 0x00020000 | |
81 | #define PCIE_UC_SERVRITY_MLFP 0x00040000 | |
82 | #define PCIE_UC_SERVRITY_ECRC 0x00080000 | |
83 | #define PCIE_UC_SERVRITY_UR 0x00100000 | |
84 | ||
85 | #define REG_DEV_SERIALNUM_CTRL 0x200 | |
86 | #define REG_DEV_MAC_SEL_MASK 0x0 /* 0:EUI; 1:MAC */ | |
87 | #define REG_DEV_MAC_SEL_SHIFT 0 | |
88 | #define REG_DEV_SERIAL_NUM_EN_MASK 0x1 | |
89 | #define REG_DEV_SERIAL_NUM_EN_SHIFT 1 | |
90 | ||
91 | #define REG_TWSI_CTRL 0x218 | |
92 | #define TWSI_CTRL_LD_OFFSET_MASK 0xFF | |
93 | #define TWSI_CTRL_LD_OFFSET_SHIFT 0 | |
94 | #define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7 | |
95 | #define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8 | |
96 | #define TWSI_CTRL_SW_LDSTART 0x800 | |
97 | #define TWSI_CTRL_HW_LDSTART 0x1000 | |
98 | #define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F | |
99 | #define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15 | |
100 | #define TWSI_CTRL_LD_EXIST 0x400000 | |
101 | #define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3 | |
102 | #define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23 | |
103 | #define TWSI_CTRL_FREQ_SEL_100K 0 | |
104 | #define TWSI_CTRL_FREQ_SEL_200K 1 | |
105 | #define TWSI_CTRL_FREQ_SEL_300K 2 | |
106 | #define TWSI_CTRL_FREQ_SEL_400K 3 | |
107 | #define TWSI_CTRL_SMB_SLV_ADDR | |
108 | #define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3 | |
109 | #define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24 | |
110 | ||
111 | ||
112 | #define REG_PCIE_DEV_MISC_CTRL 0x21C | |
113 | #define PCIE_DEV_MISC_EXT_PIPE 0x2 | |
114 | #define PCIE_DEV_MISC_RETRY_BUFDIS 0x1 | |
115 | #define PCIE_DEV_MISC_SPIROM_EXIST 0x4 | |
116 | #define PCIE_DEV_MISC_SERDES_ENDIAN 0x8 | |
117 | #define PCIE_DEV_MISC_SERDES_SEL_DIN 0x10 | |
118 | ||
119 | #define REG_PCIE_PHYMISC 0x1000 | |
120 | #define PCIE_PHYMISC_FORCE_RCV_DET 0x4 | |
121 | ||
122 | #define REG_TWSI_DEBUG 0x1108 | |
123 | #define TWSI_DEBUG_DEV_EXIST 0x20000000 | |
124 | ||
125 | #define REG_EEPROM_CTRL 0x12C0 | |
126 | #define EEPROM_CTRL_DATA_HI_MASK 0xFFFF | |
127 | #define EEPROM_CTRL_DATA_HI_SHIFT 0 | |
128 | #define EEPROM_CTRL_ADDR_MASK 0x3FF | |
129 | #define EEPROM_CTRL_ADDR_SHIFT 16 | |
130 | #define EEPROM_CTRL_ACK 0x40000000 | |
131 | #define EEPROM_CTRL_RW 0x80000000 | |
132 | ||
133 | #define REG_EEPROM_DATA_LO 0x12C4 | |
134 | ||
135 | #define REG_OTP_CTRL 0x12F0 | |
136 | #define OTP_CTRL_CLK_EN 0x0002 | |
137 | ||
138 | #define REG_PM_CTRL 0x12F8 | |
139 | #define PM_CTRL_SDES_EN 0x00000001 | |
140 | #define PM_CTRL_RBER_EN 0x00000002 | |
141 | #define PM_CTRL_CLK_REQ_EN 0x00000004 | |
142 | #define PM_CTRL_ASPM_L1_EN 0x00000008 | |
143 | #define PM_CTRL_SERDES_L1_EN 0x00000010 | |
144 | #define PM_CTRL_SERDES_PLL_L1_EN 0x00000020 | |
145 | #define PM_CTRL_SERDES_PD_EX_L1 0x00000040 | |
146 | #define PM_CTRL_SERDES_BUDS_RX_L1_EN 0x00000080 | |
147 | #define PM_CTRL_L0S_ENTRY_TIMER_MASK 0xF | |
148 | #define PM_CTRL_L0S_ENTRY_TIMER_SHIFT 8 | |
149 | #define PM_CTRL_ASPM_L0S_EN 0x00001000 | |
150 | #define PM_CTRL_CLK_SWH_L1 0x00002000 | |
151 | #define PM_CTRL_CLK_PWM_VER1_1 0x00004000 | |
152 | #define PM_CTRL_PCIE_RECV 0x00008000 | |
153 | #define PM_CTRL_L1_ENTRY_TIMER_MASK 0xF | |
154 | #define PM_CTRL_L1_ENTRY_TIMER_SHIFT 16 | |
155 | #define PM_CTRL_PM_REQ_TIMER_MASK 0xF | |
156 | #define PM_CTRL_PM_REQ_TIMER_SHIFT 20 | |
157 | #define PM_CTRL_LCKDET_TIMER_MASK 0x3F | |
158 | #define PM_CTRL_LCKDET_TIMER_SHIFT 24 | |
159 | #define PM_CTRL_MAC_ASPM_CHK 0x40000000 | |
160 | #define PM_CTRL_HOTRST 0x80000000 | |
161 | ||
162 | /* Selene Master Control Register */ | |
163 | #define REG_MASTER_CTRL 0x1400 | |
164 | #define MASTER_CTRL_SOFT_RST 0x1 | |
165 | #define MASTER_CTRL_TEST_MODE_MASK 0x3 | |
166 | #define MASTER_CTRL_TEST_MODE_SHIFT 2 | |
167 | #define MASTER_CTRL_BERT_START 0x10 | |
168 | #define MASTER_CTRL_MTIMER_EN 0x100 | |
169 | #define MASTER_CTRL_MANUAL_INT 0x200 | |
170 | #define MASTER_CTRL_TX_ITIMER_EN 0x400 | |
171 | #define MASTER_CTRL_RX_ITIMER_EN 0x800 | |
172 | #define MASTER_CTRL_CLK_SEL_DIS 0x1000 | |
173 | #define MASTER_CTRL_CLK_SWH_MODE 0x2000 | |
174 | #define MASTER_CTRL_INT_RDCLR 0x4000 | |
175 | #define MASTER_CTRL_REV_NUM_SHIFT 16 | |
176 | #define MASTER_CTRL_REV_NUM_MASK 0xff | |
177 | #define MASTER_CTRL_DEV_ID_SHIFT 24 | |
178 | #define MASTER_CTRL_DEV_ID_MASK 0x7f | |
179 | #define MASTER_CTRL_OTP_SEL 0x80000000 | |
180 | ||
181 | /* Timer Initial Value Register */ | |
182 | #define REG_MANUAL_TIMER_INIT 0x1404 | |
183 | ||
184 | /* IRQ ModeratorTimer Initial Value Register */ | |
185 | #define REG_IRQ_MODRT_TIMER_INIT 0x1408 | |
186 | #define IRQ_MODRT_TIMER_MASK 0xffff | |
187 | #define IRQ_MODRT_TX_TIMER_SHIFT 0 | |
188 | #define IRQ_MODRT_RX_TIMER_SHIFT 16 | |
189 | ||
190 | #define REG_GPHY_CTRL 0x140C | |
191 | #define GPHY_CTRL_EXT_RESET 0x1 | |
192 | #define GPHY_CTRL_RTL_MODE 0x2 | |
193 | #define GPHY_CTRL_LED_MODE 0x4 | |
194 | #define GPHY_CTRL_ANEG_NOW 0x8 | |
195 | #define GPHY_CTRL_REV_ANEG 0x10 | |
196 | #define GPHY_CTRL_GATE_25M_EN 0x20 | |
197 | #define GPHY_CTRL_LPW_EXIT 0x40 | |
198 | #define GPHY_CTRL_PHY_IDDQ 0x80 | |
199 | #define GPHY_CTRL_PHY_IDDQ_DIS 0x100 | |
200 | #define GPHY_CTRL_GIGA_DIS 0x200 | |
201 | #define GPHY_CTRL_HIB_EN 0x400 | |
202 | #define GPHY_CTRL_HIB_PULSE 0x800 | |
203 | #define GPHY_CTRL_SEL_ANA_RST 0x1000 | |
204 | #define GPHY_CTRL_PHY_PLL_ON 0x2000 | |
205 | #define GPHY_CTRL_PWDOWN_HW 0x4000 | |
206 | #define GPHY_CTRL_PHY_PLL_BYPASS 0x8000 | |
207 | ||
208 | #define GPHY_CTRL_DEFAULT ( \ | |
209 | GPHY_CTRL_SEL_ANA_RST |\ | |
210 | GPHY_CTRL_HIB_PULSE |\ | |
211 | GPHY_CTRL_HIB_EN) | |
212 | ||
213 | #define GPHY_CTRL_PW_WOL_DIS ( \ | |
214 | GPHY_CTRL_SEL_ANA_RST |\ | |
215 | GPHY_CTRL_HIB_PULSE |\ | |
216 | GPHY_CTRL_HIB_EN |\ | |
217 | GPHY_CTRL_PWDOWN_HW |\ | |
218 | GPHY_CTRL_PHY_IDDQ) | |
219 | ||
220 | /* Block IDLE Status Register */ | |
221 | #define REG_IDLE_STATUS 0x1410 | |
222 | #define IDLE_STATUS_MASK 0x00FF | |
223 | #define IDLE_STATUS_RXMAC_NO_IDLE 0x1 | |
224 | #define IDLE_STATUS_TXMAC_NO_IDLE 0x2 | |
225 | #define IDLE_STATUS_RXQ_NO_IDLE 0x4 | |
226 | #define IDLE_STATUS_TXQ_NO_IDLE 0x8 | |
227 | #define IDLE_STATUS_DMAR_NO_IDLE 0x10 | |
228 | #define IDLE_STATUS_DMAW_NO_IDLE 0x20 | |
229 | #define IDLE_STATUS_SMB_NO_IDLE 0x40 | |
230 | #define IDLE_STATUS_CMB_NO_IDLE 0x80 | |
231 | ||
232 | /* MDIO Control Register */ | |
233 | #define REG_MDIO_CTRL 0x1414 | |
234 | #define MDIO_DATA_MASK 0xffff /* On MDIO write, the 16-bit | |
235 | * control data to write to PHY | |
236 | * MII management register */ | |
237 | #define MDIO_DATA_SHIFT 0 /* On MDIO read, the 16-bit | |
238 | * status data that was read | |
239 | * from the PHY MII management register */ | |
240 | #define MDIO_REG_ADDR_MASK 0x1f /* MDIO register address */ | |
241 | #define MDIO_REG_ADDR_SHIFT 16 | |
242 | #define MDIO_RW 0x200000 /* 1: read, 0: write */ | |
243 | #define MDIO_SUP_PREAMBLE 0x400000 /* Suppress preamble */ | |
244 | #define MDIO_START 0x800000 /* Write 1 to initiate the MDIO | |
245 | * master. And this bit is self | |
246 | * cleared after one cycle */ | |
247 | #define MDIO_CLK_SEL_SHIFT 24 | |
248 | #define MDIO_CLK_25_4 0 | |
249 | #define MDIO_CLK_25_6 2 | |
250 | #define MDIO_CLK_25_8 3 | |
251 | #define MDIO_CLK_25_10 4 | |
252 | #define MDIO_CLK_25_14 5 | |
253 | #define MDIO_CLK_25_20 6 | |
254 | #define MDIO_CLK_25_28 7 | |
255 | #define MDIO_BUSY 0x8000000 | |
256 | #define MDIO_AP_EN 0x10000000 | |
257 | #define MDIO_WAIT_TIMES 10 | |
258 | ||
259 | /* MII PHY Status Register */ | |
260 | #define REG_PHY_STATUS 0x1418 | |
261 | #define PHY_GENERAL_STATUS_MASK 0xFFFF | |
262 | #define PHY_STATUS_RECV_ENABLE 0x0001 | |
263 | #define PHY_OE_PWSP_STATUS_MASK 0x07FF | |
264 | #define PHY_OE_PWSP_STATUS_SHIFT 16 | |
265 | #define PHY_STATUS_LPW_STATE 0x80000000 | |
266 | /* BIST Control and Status Register0 (for the Packet Memory) */ | |
267 | #define REG_BIST0_CTRL 0x141c | |
268 | #define BIST0_NOW 0x1 | |
269 | #define BIST0_SRAM_FAIL 0x2 /* 1: The SRAM failure is | |
270 | * un-repairable because | |
271 | * it has address decoder | |
272 | * failure or more than 1 cell | |
273 | * stuck-to-x failure */ | |
274 | #define BIST0_FUSE_FLAG 0x4 | |
275 | ||
276 | /* BIST Control and Status Register1(for the retry buffer of PCI Express) */ | |
277 | #define REG_BIST1_CTRL 0x1420 | |
278 | #define BIST1_NOW 0x1 | |
279 | #define BIST1_SRAM_FAIL 0x2 | |
280 | #define BIST1_FUSE_FLAG 0x4 | |
281 | ||
282 | /* SerDes Lock Detect Control and Status Register */ | |
283 | #define REG_SERDES_LOCK 0x1424 | |
284 | #define SERDES_LOCK_DETECT 0x1 /* SerDes lock detected. This signal | |
285 | * comes from Analog SerDes */ | |
286 | #define SERDES_LOCK_DETECT_EN 0x2 /* 1: Enable SerDes Lock detect function */ | |
287 | ||
288 | /* MAC Control Register */ | |
289 | #define REG_MAC_CTRL 0x1480 | |
290 | #define MAC_CTRL_TX_EN 0x1 | |
291 | #define MAC_CTRL_RX_EN 0x2 | |
292 | #define MAC_CTRL_TX_FLOW 0x4 | |
293 | #define MAC_CTRL_RX_FLOW 0x8 | |
294 | #define MAC_CTRL_LOOPBACK 0x10 | |
295 | #define MAC_CTRL_DUPLX 0x20 | |
296 | #define MAC_CTRL_ADD_CRC 0x40 | |
297 | #define MAC_CTRL_PAD 0x80 | |
298 | #define MAC_CTRL_LENCHK 0x100 | |
299 | #define MAC_CTRL_HUGE_EN 0x200 | |
300 | #define MAC_CTRL_PRMLEN_SHIFT 10 | |
301 | #define MAC_CTRL_PRMLEN_MASK 0xf | |
302 | #define MAC_CTRL_RMV_VLAN 0x4000 | |
303 | #define MAC_CTRL_PROMIS_EN 0x8000 | |
304 | #define MAC_CTRL_TX_PAUSE 0x10000 | |
305 | #define MAC_CTRL_SCNT 0x20000 | |
306 | #define MAC_CTRL_SRST_TX 0x40000 | |
307 | #define MAC_CTRL_TX_SIMURST 0x80000 | |
308 | #define MAC_CTRL_SPEED_SHIFT 20 | |
309 | #define MAC_CTRL_SPEED_MASK 0x3 | |
310 | #define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 | |
311 | #define MAC_CTRL_TX_HUGE 0x800000 | |
312 | #define MAC_CTRL_RX_CHKSUM_EN 0x1000000 | |
313 | #define MAC_CTRL_MC_ALL_EN 0x2000000 | |
314 | #define MAC_CTRL_BC_EN 0x4000000 | |
315 | #define MAC_CTRL_DBG 0x8000000 | |
316 | #define MAC_CTRL_SINGLE_PAUSE_EN 0x10000000 | |
317 | ||
318 | /* MAC IPG/IFG Control Register */ | |
319 | #define REG_MAC_IPG_IFG 0x1484 | |
320 | #define MAC_IPG_IFG_IPGT_SHIFT 0 /* Desired back to back | |
321 | * inter-packet gap. The | |
322 | * default is 96-bit time */ | |
323 | #define MAC_IPG_IFG_IPGT_MASK 0x7f | |
324 | #define MAC_IPG_IFG_MIFG_SHIFT 8 /* Minimum number of IFG to | |
325 | * enforce in between RX frames */ | |
326 | #define MAC_IPG_IFG_MIFG_MASK 0xff /* Frame gap below such IFP is dropped */ | |
327 | #define MAC_IPG_IFG_IPGR1_SHIFT 16 /* 64bit Carrier-Sense window */ | |
328 | #define MAC_IPG_IFG_IPGR1_MASK 0x7f | |
329 | #define MAC_IPG_IFG_IPGR2_SHIFT 24 /* 96-bit IPG window */ | |
330 | #define MAC_IPG_IFG_IPGR2_MASK 0x7f | |
331 | ||
332 | /* MAC STATION ADDRESS */ | |
333 | #define REG_MAC_STA_ADDR 0x1488 | |
334 | ||
335 | /* Hash table for multicast address */ | |
336 | #define REG_RX_HASH_TABLE 0x1490 | |
337 | ||
338 | /* MAC Half-Duplex Control Register */ | |
339 | #define REG_MAC_HALF_DUPLX_CTRL 0x1498 | |
340 | #define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 /* Collision Window */ | |
341 | #define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff | |
342 | #define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 | |
343 | #define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf | |
344 | #define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 | |
345 | #define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 | |
346 | #define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 /* No back-off on backpressure, | |
347 | * immediately start the | |
348 | * transmission after back pressure */ | |
349 | #define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */ | |
350 | #define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 /* Maximum binary exponential number */ | |
351 | #define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf | |
352 | #define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 /* IPG to start JAM for collision based flow control in half-duplex */ | |
353 | #define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf /* mode. In unit of 8-bit time */ | |
354 | ||
355 | /* Maximum Frame Length Control Register */ | |
356 | #define REG_MTU 0x149c | |
357 | ||
358 | /* Wake-On-Lan control register */ | |
359 | #define REG_WOL_CTRL 0x14a0 | |
360 | #define WOL_PATTERN_EN 0x00000001 | |
361 | #define WOL_PATTERN_PME_EN 0x00000002 | |
362 | #define WOL_MAGIC_EN 0x00000004 | |
363 | #define WOL_MAGIC_PME_EN 0x00000008 | |
364 | #define WOL_LINK_CHG_EN 0x00000010 | |
365 | #define WOL_LINK_CHG_PME_EN 0x00000020 | |
366 | #define WOL_PATTERN_ST 0x00000100 | |
367 | #define WOL_MAGIC_ST 0x00000200 | |
368 | #define WOL_LINKCHG_ST 0x00000400 | |
369 | #define WOL_CLK_SWITCH_EN 0x00008000 | |
370 | #define WOL_PT0_EN 0x00010000 | |
371 | #define WOL_PT1_EN 0x00020000 | |
372 | #define WOL_PT2_EN 0x00040000 | |
373 | #define WOL_PT3_EN 0x00080000 | |
374 | #define WOL_PT4_EN 0x00100000 | |
375 | #define WOL_PT5_EN 0x00200000 | |
376 | #define WOL_PT6_EN 0x00400000 | |
377 | ||
378 | /* WOL Length ( 2 DWORD ) */ | |
379 | #define REG_WOL_PATTERN_LEN 0x14a4 | |
380 | #define WOL_PT_LEN_MASK 0x7f | |
381 | #define WOL_PT0_LEN_SHIFT 0 | |
382 | #define WOL_PT1_LEN_SHIFT 8 | |
383 | #define WOL_PT2_LEN_SHIFT 16 | |
384 | #define WOL_PT3_LEN_SHIFT 24 | |
385 | #define WOL_PT4_LEN_SHIFT 0 | |
386 | #define WOL_PT5_LEN_SHIFT 8 | |
387 | #define WOL_PT6_LEN_SHIFT 16 | |
388 | ||
389 | /* Internal SRAM Partition Register */ | |
390 | #define RFDX_HEAD_ADDR_MASK 0x03FF | |
391 | #define RFDX_HARD_ADDR_SHIFT 0 | |
392 | #define RFDX_TAIL_ADDR_MASK 0x03FF | |
393 | #define RFDX_TAIL_ADDR_SHIFT 16 | |
394 | ||
395 | #define REG_SRAM_RFD0_INFO 0x1500 | |
396 | #define REG_SRAM_RFD1_INFO 0x1504 | |
397 | #define REG_SRAM_RFD2_INFO 0x1508 | |
398 | #define REG_SRAM_RFD3_INFO 0x150C | |
399 | ||
400 | #define REG_RFD_NIC_LEN 0x1510 /* In 8-bytes */ | |
401 | #define RFD_NIC_LEN_MASK 0x03FF | |
402 | ||
403 | #define REG_SRAM_TRD_ADDR 0x1518 | |
404 | #define TPD_HEAD_ADDR_MASK 0x03FF | |
405 | #define TPD_HEAD_ADDR_SHIFT 0 | |
406 | #define TPD_TAIL_ADDR_MASK 0x03FF | |
407 | #define TPD_TAIL_ADDR_SHIFT 16 | |
408 | ||
409 | #define REG_SRAM_TRD_LEN 0x151C /* In 8-bytes */ | |
410 | #define TPD_NIC_LEN_MASK 0x03FF | |
411 | ||
412 | #define REG_SRAM_RXF_ADDR 0x1520 | |
413 | #define REG_SRAM_RXF_LEN 0x1524 | |
414 | #define REG_SRAM_TXF_ADDR 0x1528 | |
415 | #define REG_SRAM_TXF_LEN 0x152C | |
416 | #define REG_SRAM_TCPH_ADDR 0x1530 | |
417 | #define REG_SRAM_PKTH_ADDR 0x1532 | |
418 | ||
419 | /* | |
420 | * Load Ptr Register | |
421 | * Software sets this bit after the initialization of the head and tail */ | |
422 | #define REG_LOAD_PTR 0x1534 | |
423 | ||
424 | /* | |
425 | * addresses of all descriptors, as well as the following descriptor | |
426 | * control register, which triggers each function block to load the head | |
427 | * pointer to prepare for the operation. This bit is then self-cleared | |
428 | * after one cycle. | |
429 | */ | |
430 | #define REG_RX_BASE_ADDR_HI 0x1540 | |
431 | #define REG_TX_BASE_ADDR_HI 0x1544 | |
432 | #define REG_SMB_BASE_ADDR_HI 0x1548 | |
433 | #define REG_SMB_BASE_ADDR_LO 0x154C | |
434 | #define REG_RFD0_HEAD_ADDR_LO 0x1550 | |
435 | #define REG_RFD1_HEAD_ADDR_LO 0x1554 | |
436 | #define REG_RFD2_HEAD_ADDR_LO 0x1558 | |
437 | #define REG_RFD3_HEAD_ADDR_LO 0x155C | |
438 | #define REG_RFD_RING_SIZE 0x1560 | |
439 | #define RFD_RING_SIZE_MASK 0x0FFF | |
440 | #define REG_RX_BUF_SIZE 0x1564 | |
441 | #define RX_BUF_SIZE_MASK 0xFFFF | |
442 | #define REG_RRD0_HEAD_ADDR_LO 0x1568 | |
443 | #define REG_RRD1_HEAD_ADDR_LO 0x156C | |
444 | #define REG_RRD2_HEAD_ADDR_LO 0x1570 | |
445 | #define REG_RRD3_HEAD_ADDR_LO 0x1574 | |
446 | #define REG_RRD_RING_SIZE 0x1578 | |
447 | #define RRD_RING_SIZE_MASK 0x0FFF | |
448 | #define REG_HTPD_HEAD_ADDR_LO 0x157C | |
449 | #define REG_NTPD_HEAD_ADDR_LO 0x1580 | |
450 | #define REG_TPD_RING_SIZE 0x1584 | |
451 | #define TPD_RING_SIZE_MASK 0xFFFF | |
452 | #define REG_CMB_BASE_ADDR_LO 0x1588 | |
453 | ||
454 | /* RSS about */ | |
455 | #define REG_RSS_KEY0 0x14B0 | |
456 | #define REG_RSS_KEY1 0x14B4 | |
457 | #define REG_RSS_KEY2 0x14B8 | |
458 | #define REG_RSS_KEY3 0x14BC | |
459 | #define REG_RSS_KEY4 0x14C0 | |
460 | #define REG_RSS_KEY5 0x14C4 | |
461 | #define REG_RSS_KEY6 0x14C8 | |
462 | #define REG_RSS_KEY7 0x14CC | |
463 | #define REG_RSS_KEY8 0x14D0 | |
464 | #define REG_RSS_KEY9 0x14D4 | |
465 | #define REG_IDT_TABLE0 0x14E0 | |
466 | #define REG_IDT_TABLE1 0x14E4 | |
467 | #define REG_IDT_TABLE2 0x14E8 | |
468 | #define REG_IDT_TABLE3 0x14EC | |
469 | #define REG_IDT_TABLE4 0x14F0 | |
470 | #define REG_IDT_TABLE5 0x14F4 | |
471 | #define REG_IDT_TABLE6 0x14F8 | |
472 | #define REG_IDT_TABLE7 0x14FC | |
473 | #define REG_IDT_TABLE REG_IDT_TABLE0 | |
474 | #define REG_RSS_HASH_VALUE 0x15B0 | |
475 | #define REG_RSS_HASH_FLAG 0x15B4 | |
476 | #define REG_BASE_CPU_NUMBER 0x15B8 | |
477 | ||
478 | /* TXQ Control Register */ | |
479 | #define REG_TXQ_CTRL 0x1590 | |
480 | #define TXQ_NUM_TPD_BURST_MASK 0xF | |
481 | #define TXQ_NUM_TPD_BURST_SHIFT 0 | |
482 | #define TXQ_CTRL_IP_OPTION_EN 0x10 | |
483 | #define TXQ_CTRL_EN 0x20 | |
484 | #define TXQ_CTRL_ENH_MODE 0x40 | |
485 | #define TXQ_CTRL_LS_8023_EN 0x80 | |
486 | #define TXQ_TXF_BURST_NUM_SHIFT 16 | |
487 | #define TXQ_TXF_BURST_NUM_MASK 0xFFFF | |
488 | ||
489 | /* Jumbo packet Threshold for task offload */ | |
490 | #define REG_TX_TSO_OFFLOAD_THRESH 0x1594 /* In 8-bytes */ | |
491 | #define TX_TSO_OFFLOAD_THRESH_MASK 0x07FF | |
492 | ||
493 | #define REG_TXF_WATER_MARK 0x1598 /* In 8-bytes */ | |
494 | #define TXF_WATER_MARK_MASK 0x0FFF | |
495 | #define TXF_LOW_WATER_MARK_SHIFT 0 | |
496 | #define TXF_HIGH_WATER_MARK_SHIFT 16 | |
497 | #define TXQ_CTRL_BURST_MODE_EN 0x80000000 | |
498 | ||
499 | #define REG_THRUPUT_MON_CTRL 0x159C | |
500 | #define THRUPUT_MON_RATE_MASK 0x3 | |
501 | #define THRUPUT_MON_RATE_SHIFT 0 | |
502 | #define THRUPUT_MON_EN 0x80 | |
503 | ||
504 | /* RXQ Control Register */ | |
505 | #define REG_RXQ_CTRL 0x15A0 | |
506 | #define ASPM_THRUPUT_LIMIT_MASK 0x3 | |
507 | #define ASPM_THRUPUT_LIMIT_SHIFT 0 | |
508 | #define ASPM_THRUPUT_LIMIT_NO 0x00 | |
509 | #define ASPM_THRUPUT_LIMIT_1M 0x01 | |
510 | #define ASPM_THRUPUT_LIMIT_10M 0x02 | |
511 | #define ASPM_THRUPUT_LIMIT_100M 0x04 | |
512 | #define RXQ1_CTRL_EN 0x10 | |
513 | #define RXQ2_CTRL_EN 0x20 | |
514 | #define RXQ3_CTRL_EN 0x40 | |
515 | #define IPV6_CHKSUM_CTRL_EN 0x80 | |
516 | #define RSS_HASH_BITS_MASK 0x00FF | |
517 | #define RSS_HASH_BITS_SHIFT 8 | |
518 | #define RSS_HASH_IPV4 0x10000 | |
519 | #define RSS_HASH_IPV4_TCP 0x20000 | |
520 | #define RSS_HASH_IPV6 0x40000 | |
521 | #define RSS_HASH_IPV6_TCP 0x80000 | |
522 | #define RXQ_RFD_BURST_NUM_MASK 0x003F | |
523 | #define RXQ_RFD_BURST_NUM_SHIFT 20 | |
524 | #define RSS_MODE_MASK 0x0003 | |
525 | #define RSS_MODE_SHIFT 26 | |
526 | #define RSS_NIP_QUEUE_SEL_MASK 0x1 | |
527 | #define RSS_NIP_QUEUE_SEL_SHIFT 28 | |
528 | #define RRS_HASH_CTRL_EN 0x20000000 | |
529 | #define RX_CUT_THRU_EN 0x40000000 | |
530 | #define RXQ_CTRL_EN 0x80000000 | |
531 | ||
532 | #define REG_RFD_FREE_THRESH 0x15A4 | |
533 | #define RFD_FREE_THRESH_MASK 0x003F | |
534 | #define RFD_FREE_HI_THRESH_SHIFT 0 | |
535 | #define RFD_FREE_LO_THRESH_SHIFT 6 | |
536 | ||
537 | /* RXF flow control register */ | |
538 | #define REG_RXQ_RXF_PAUSE_THRESH 0x15A8 | |
539 | #define RXQ_RXF_PAUSE_TH_HI_SHIFT 0 | |
540 | #define RXQ_RXF_PAUSE_TH_HI_MASK 0x0FFF | |
541 | #define RXQ_RXF_PAUSE_TH_LO_SHIFT 16 | |
542 | #define RXQ_RXF_PAUSE_TH_LO_MASK 0x0FFF | |
543 | ||
544 | #define REG_RXD_DMA_CTRL 0x15AC | |
545 | #define RXD_DMA_THRESH_MASK 0x0FFF /* In 8-bytes */ | |
546 | #define RXD_DMA_THRESH_SHIFT 0 | |
547 | #define RXD_DMA_DOWN_TIMER_MASK 0xFFFF | |
548 | #define RXD_DMA_DOWN_TIMER_SHIFT 16 | |
549 | ||
550 | /* DMA Engine Control Register */ | |
551 | #define REG_DMA_CTRL 0x15C0 | |
552 | #define DMA_CTRL_DMAR_IN_ORDER 0x1 | |
553 | #define DMA_CTRL_DMAR_ENH_ORDER 0x2 | |
554 | #define DMA_CTRL_DMAR_OUT_ORDER 0x4 | |
555 | #define DMA_CTRL_RCB_VALUE 0x8 | |
556 | #define DMA_CTRL_DMAR_BURST_LEN_MASK 0x0007 | |
557 | #define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4 | |
558 | #define DMA_CTRL_DMAW_BURST_LEN_MASK 0x0007 | |
559 | #define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7 | |
560 | #define DMA_CTRL_DMAR_REQ_PRI 0x400 | |
561 | #define DMA_CTRL_DMAR_DLY_CNT_MASK 0x001F | |
562 | #define DMA_CTRL_DMAR_DLY_CNT_SHIFT 11 | |
563 | #define DMA_CTRL_DMAW_DLY_CNT_MASK 0x000F | |
564 | #define DMA_CTRL_DMAW_DLY_CNT_SHIFT 16 | |
565 | #define DMA_CTRL_CMB_EN 0x100000 | |
566 | #define DMA_CTRL_SMB_EN 0x200000 | |
567 | #define DMA_CTRL_CMB_NOW 0x400000 | |
568 | #define MAC_CTRL_SMB_DIS 0x1000000 | |
569 | #define DMA_CTRL_SMB_NOW 0x80000000 | |
570 | ||
571 | /* CMB/SMB Control Register */ | |
572 | #define REG_SMB_STAT_TIMER 0x15C4 /* 2us resolution */ | |
573 | #define SMB_STAT_TIMER_MASK 0xFFFFFF | |
574 | #define REG_CMB_TPD_THRESH 0x15C8 | |
575 | #define CMB_TPD_THRESH_MASK 0xFFFF | |
576 | #define REG_CMB_TX_TIMER 0x15CC /* 2us resolution */ | |
577 | #define CMB_TX_TIMER_MASK 0xFFFF | |
578 | ||
579 | /* Mail box */ | |
580 | #define MB_RFDX_PROD_IDX_MASK 0xFFFF | |
581 | #define REG_MB_RFD0_PROD_IDX 0x15E0 | |
582 | #define REG_MB_RFD1_PROD_IDX 0x15E4 | |
583 | #define REG_MB_RFD2_PROD_IDX 0x15E8 | |
584 | #define REG_MB_RFD3_PROD_IDX 0x15EC | |
585 | ||
586 | #define MB_PRIO_PROD_IDX_MASK 0xFFFF | |
587 | #define REG_MB_PRIO_PROD_IDX 0x15F0 | |
588 | #define MB_HTPD_PROD_IDX_SHIFT 0 | |
589 | #define MB_NTPD_PROD_IDX_SHIFT 16 | |
590 | ||
591 | #define MB_PRIO_CONS_IDX_MASK 0xFFFF | |
592 | #define REG_MB_PRIO_CONS_IDX 0x15F4 | |
593 | #define MB_HTPD_CONS_IDX_SHIFT 0 | |
594 | #define MB_NTPD_CONS_IDX_SHIFT 16 | |
595 | ||
596 | #define REG_MB_RFD01_CONS_IDX 0x15F8 | |
597 | #define MB_RFD0_CONS_IDX_MASK 0x0000FFFF | |
598 | #define MB_RFD1_CONS_IDX_MASK 0xFFFF0000 | |
599 | #define REG_MB_RFD23_CONS_IDX 0x15FC | |
600 | #define MB_RFD2_CONS_IDX_MASK 0x0000FFFF | |
601 | #define MB_RFD3_CONS_IDX_MASK 0xFFFF0000 | |
602 | ||
603 | /* Interrupt Status Register */ | |
604 | #define REG_ISR 0x1600 | |
605 | #define ISR_SMB 0x00000001 | |
606 | #define ISR_TIMER 0x00000002 | |
607 | /* | |
608 | * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set | |
609 | * in Table 51 Selene Master Control Register (Offset 0x1400). | |
610 | */ | |
611 | #define ISR_MANUAL 0x00000004 | |
612 | #define ISR_HW_RXF_OV 0x00000008 /* RXF overflow interrupt */ | |
613 | #define ISR_RFD0_UR 0x00000010 /* RFD0 under run */ | |
614 | #define ISR_RFD1_UR 0x00000020 | |
615 | #define ISR_RFD2_UR 0x00000040 | |
616 | #define ISR_RFD3_UR 0x00000080 | |
617 | #define ISR_TXF_UR 0x00000100 | |
618 | #define ISR_DMAR_TO_RST 0x00000200 | |
619 | #define ISR_DMAW_TO_RST 0x00000400 | |
620 | #define ISR_TX_CREDIT 0x00000800 | |
621 | #define ISR_GPHY 0x00001000 | |
622 | /* GPHY low power state interrupt */ | |
623 | #define ISR_GPHY_LPW 0x00002000 | |
624 | #define ISR_TXQ_TO_RST 0x00004000 | |
625 | #define ISR_TX_PKT 0x00008000 | |
626 | #define ISR_RX_PKT_0 0x00010000 | |
627 | #define ISR_RX_PKT_1 0x00020000 | |
628 | #define ISR_RX_PKT_2 0x00040000 | |
629 | #define ISR_RX_PKT_3 0x00080000 | |
630 | #define ISR_MAC_RX 0x00100000 | |
631 | #define ISR_MAC_TX 0x00200000 | |
632 | #define ISR_UR_DETECTED 0x00400000 | |
633 | #define ISR_FERR_DETECTED 0x00800000 | |
634 | #define ISR_NFERR_DETECTED 0x01000000 | |
635 | #define ISR_CERR_DETECTED 0x02000000 | |
636 | #define ISR_PHY_LINKDOWN 0x04000000 | |
637 | #define ISR_DIS_INT 0x80000000 | |
638 | ||
639 | /* Interrupt Mask Register */ | |
640 | #define REG_IMR 0x1604 | |
641 | ||
642 | #define IMR_NORMAL_MASK (\ | |
643 | ISR_MANUAL |\ | |
644 | ISR_HW_RXF_OV |\ | |
645 | ISR_RFD0_UR |\ | |
646 | ISR_TXF_UR |\ | |
647 | ISR_DMAR_TO_RST |\ | |
648 | ISR_TXQ_TO_RST |\ | |
649 | ISR_DMAW_TO_RST |\ | |
650 | ISR_GPHY |\ | |
651 | ISR_TX_PKT |\ | |
652 | ISR_RX_PKT_0 |\ | |
653 | ISR_GPHY_LPW |\ | |
654 | ISR_PHY_LINKDOWN) | |
655 | ||
656 | #define ISR_RX_PKT (\ | |
657 | ISR_RX_PKT_0 |\ | |
658 | ISR_RX_PKT_1 |\ | |
659 | ISR_RX_PKT_2 |\ | |
660 | ISR_RX_PKT_3) | |
661 | ||
662 | #define ISR_OVER (\ | |
663 | ISR_RFD0_UR |\ | |
664 | ISR_RFD1_UR |\ | |
665 | ISR_RFD2_UR |\ | |
666 | ISR_RFD3_UR |\ | |
667 | ISR_HW_RXF_OV |\ | |
668 | ISR_TXF_UR) | |
669 | ||
670 | #define ISR_ERROR (\ | |
671 | ISR_DMAR_TO_RST |\ | |
672 | ISR_TXQ_TO_RST |\ | |
673 | ISR_DMAW_TO_RST |\ | |
674 | ISR_PHY_LINKDOWN) | |
675 | ||
676 | #define REG_INT_RETRIG_TIMER 0x1608 | |
677 | #define INT_RETRIG_TIMER_MASK 0xFFFF | |
678 | ||
679 | #define REG_HDS_CTRL 0x160C | |
680 | #define HDS_CTRL_EN 0x0001 | |
681 | #define HDS_CTRL_BACKFILLSIZE_SHIFT 8 | |
682 | #define HDS_CTRL_BACKFILLSIZE_MASK 0x0FFF | |
683 | #define HDS_CTRL_MAX_HDRSIZE_SHIFT 20 | |
684 | #define HDS_CTRL_MAC_HDRSIZE_MASK 0x0FFF | |
685 | ||
686 | #define REG_MAC_RX_STATUS_BIN 0x1700 | |
687 | #define REG_MAC_RX_STATUS_END 0x175c | |
688 | #define REG_MAC_TX_STATUS_BIN 0x1760 | |
689 | #define REG_MAC_TX_STATUS_END 0x17c0 | |
690 | ||
691 | /* DEBUG ADDR */ | |
692 | #define REG_DEBUG_DATA0 0x1900 | |
693 | #define REG_DEBUG_DATA1 0x1904 | |
694 | ||
695 | /* PHY Control Register */ | |
696 | #define MII_BMCR 0x00 | |
697 | #define BMCR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ | |
698 | #define BMCR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ | |
699 | #define BMCR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ | |
700 | #define BMCR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ | |
701 | #define BMCR_ISOLATE 0x0400 /* Isolate PHY from MII */ | |
702 | #define BMCR_POWER_DOWN 0x0800 /* Power down */ | |
703 | #define BMCR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ | |
704 | #define BMCR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ | |
705 | #define BMCR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ | |
706 | #define BMCR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ | |
707 | #define BMCR_SPEED_MASK 0x2040 | |
708 | #define BMCR_SPEED_1000 0x0040 | |
709 | #define BMCR_SPEED_100 0x2000 | |
710 | #define BMCR_SPEED_10 0x0000 | |
711 | ||
712 | /* PHY Status Register */ | |
713 | #define MII_BMSR 0x01 | |
714 | #define BMMSR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ | |
715 | #define BMSR_JABBER_DETECT 0x0002 /* Jabber Detected */ | |
716 | #define BMSR_LINK_STATUS 0x0004 /* Link Status 1 = link */ | |
717 | #define BMSR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ | |
718 | #define BMSR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ | |
719 | #define BMSR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ | |
720 | #define BMSR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ | |
721 | #define BMSR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ | |
722 | #define BMSR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ | |
723 | #define BMSR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ | |
724 | #define BMSR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ | |
725 | #define BMSR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ | |
726 | #define BMSR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ | |
727 | #define BMMII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ | |
728 | #define BMMII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ | |
729 | ||
730 | #define MII_PHYSID1 0x02 | |
731 | #define MII_PHYSID2 0x03 | |
732 | ||
733 | /* Autoneg Advertisement Register */ | |
734 | #define MII_ADVERTISE 0x04 | |
735 | #define ADVERTISE_SPEED_MASK 0x01E0 | |
736 | #define ADVERTISE_DEFAULT_CAP 0x0DE0 | |
737 | ||
738 | /* 1000BASE-T Control Register */ | |
739 | #define MII_GIGA_CR 0x09 | |
740 | #define GIGA_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port 0=DTE device */ | |
741 | ||
742 | #define GIGA_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master 0=Configure PHY as Slave */ | |
743 | #define GIGA_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value 0=Automatic Master/Slave config */ | |
744 | #define GIGA_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ | |
745 | #define GIGA_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ | |
746 | #define GIGA_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ | |
747 | #define GIGA_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ | |
748 | #define GIGA_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ | |
749 | #define GIGA_CR_1000T_SPEED_MASK 0x0300 | |
750 | #define GIGA_CR_1000T_DEFAULT_CAP 0x0300 | |
751 | ||
752 | /* PHY Specific Status Register */ | |
753 | #define MII_GIGA_PSSR 0x11 | |
754 | #define GIGA_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ | |
755 | #define GIGA_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ | |
756 | #define GIGA_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ | |
757 | #define GIGA_PSSR_10MBS 0x0000 /* 00=10Mbs */ | |
758 | #define GIGA_PSSR_100MBS 0x4000 /* 01=100Mbs */ | |
759 | #define GIGA_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ | |
760 | ||
761 | /* PHY Interrupt Enable Register */ | |
762 | #define MII_IER 0x12 | |
763 | #define IER_LINK_UP 0x0400 | |
764 | #define IER_LINK_DOWN 0x0800 | |
765 | ||
766 | /* PHY Interrupt Status Register */ | |
767 | #define MII_ISR 0x13 | |
768 | #define ISR_LINK_UP 0x0400 | |
769 | #define ISR_LINK_DOWN 0x0800 | |
770 | ||
771 | /* Cable-Detect-Test Control Register */ | |
772 | #define MII_CDTC 0x16 | |
773 | #define CDTC_EN_OFF 0 /* sc */ | |
774 | #define CDTC_EN_BITS 1 | |
775 | #define CDTC_PAIR_OFF 8 | |
776 | #define CDTC_PAIR_BIT 2 | |
777 | ||
778 | /* Cable-Detect-Test Status Register */ | |
779 | #define MII_CDTS 0x1C | |
780 | #define CDTS_STATUS_OFF 8 | |
781 | #define CDTS_STATUS_BITS 2 | |
782 | #define CDTS_STATUS_NORMAL 0 | |
783 | #define CDTS_STATUS_SHORT 1 | |
784 | #define CDTS_STATUS_OPEN 2 | |
785 | #define CDTS_STATUS_INVALID 3 | |
786 | ||
787 | #define MII_DBG_ADDR 0x1D | |
788 | #define MII_DBG_DATA 0x1E | |
789 | ||
790 | #define MII_ANA_CTRL_0 0x0 | |
791 | #define ANA_RESTART_CAL 0x0001 | |
792 | #define ANA_MANUL_SWICH_ON_SHIFT 0x1 | |
793 | #define ANA_MANUL_SWICH_ON_MASK 0xF | |
794 | #define ANA_MAN_ENABLE 0x0020 | |
795 | #define ANA_SEL_HSP 0x0040 | |
796 | #define ANA_EN_HB 0x0080 | |
797 | #define ANA_EN_HBIAS 0x0100 | |
798 | #define ANA_OEN_125M 0x0200 | |
799 | #define ANA_EN_LCKDT 0x0400 | |
800 | #define ANA_LCKDT_PHY 0x0800 | |
801 | #define ANA_AFE_MODE 0x1000 | |
802 | #define ANA_VCO_SLOW 0x2000 | |
803 | #define ANA_VCO_FAST 0x4000 | |
804 | #define ANA_SEL_CLK125M_DSP 0x8000 | |
805 | ||
806 | #define MII_ANA_CTRL_4 0x4 | |
807 | #define ANA_IECHO_ADJ_MASK 0xF | |
808 | #define ANA_IECHO_ADJ_3_SHIFT 0 | |
809 | #define ANA_IECHO_ADJ_2_SHIFT 4 | |
810 | #define ANA_IECHO_ADJ_1_SHIFT 8 | |
811 | #define ANA_IECHO_ADJ_0_SHIFT 12 | |
812 | ||
813 | #define MII_ANA_CTRL_5 0x5 | |
814 | #define ANA_SERDES_CDR_BW_SHIFT 0 | |
815 | #define ANA_SERDES_CDR_BW_MASK 0x3 | |
816 | #define ANA_MS_PAD_DBG 0x0004 | |
817 | #define ANA_SPEEDUP_DBG 0x0008 | |
818 | #define ANA_SERDES_TH_LOS_SHIFT 4 | |
819 | #define ANA_SERDES_TH_LOS_MASK 0x3 | |
820 | #define ANA_SERDES_EN_DEEM 0x0040 | |
821 | #define ANA_SERDES_TXELECIDLE 0x0080 | |
822 | #define ANA_SERDES_BEACON 0x0100 | |
823 | #define ANA_SERDES_HALFTXDR 0x0200 | |
824 | #define ANA_SERDES_SEL_HSP 0x0400 | |
825 | #define ANA_SERDES_EN_PLL 0x0800 | |
826 | #define ANA_SERDES_EN 0x1000 | |
827 | #define ANA_SERDES_EN_LCKDT 0x2000 | |
828 | ||
829 | #define MII_ANA_CTRL_11 0xB | |
830 | #define ANA_PS_HIB_EN 0x8000 | |
831 | ||
832 | #define MII_ANA_CTRL_18 0x12 | |
833 | #define ANA_TEST_MODE_10BT_01SHIFT 0 | |
834 | #define ANA_TEST_MODE_10BT_01MASK 0x3 | |
835 | #define ANA_LOOP_SEL_10BT 0x0004 | |
836 | #define ANA_RGMII_MODE_SW 0x0008 | |
837 | #define ANA_EN_LONGECABLE 0x0010 | |
838 | #define ANA_TEST_MODE_10BT_2 0x0020 | |
839 | #define ANA_EN_10BT_IDLE 0x0400 | |
840 | #define ANA_EN_MASK_TB 0x0800 | |
841 | #define ANA_TRIGGER_SEL_TIMER_SHIFT 12 | |
842 | #define ANA_TRIGGER_SEL_TIMER_MASK 0x3 | |
843 | #define ANA_INTERVAL_SEL_TIMER_SHIFT 14 | |
844 | #define ANA_INTERVAL_SEL_TIMER_MASK 0x3 | |
845 | ||
846 | #define MII_ANA_CTRL_41 0x29 | |
847 | #define ANA_TOP_PS_EN 0x8000 | |
848 | ||
849 | #define MII_ANA_CTRL_54 0x36 | |
850 | #define ANA_LONG_CABLE_TH_100_SHIFT 0 | |
851 | #define ANA_LONG_CABLE_TH_100_MASK 0x3F | |
852 | #define ANA_DESERVED 0x0040 | |
853 | #define ANA_EN_LIT_CH 0x0080 | |
854 | #define ANA_SHORT_CABLE_TH_100_SHIFT 8 | |
855 | #define ANA_SHORT_CABLE_TH_100_MASK 0x3F | |
856 | #define ANA_BP_BAD_LINK_ACCUM 0x4000 | |
857 | #define ANA_BP_SMALL_BW 0x8000 | |
858 | ||
859 | #endif /*_ATL1C_HW_H_*/ |