Commit | Line | Data |
---|---|---|
65dbf343 | 1 | /* |
70f10482 | 2 | * linux/drivers/mmc/host/at91_mci.c - ATMEL AT91 MCI Driver |
65dbf343 AV |
3 | * |
4 | * Copyright (C) 2005 Cougar Creek Computing Devices Ltd, All Rights Reserved | |
5 | * | |
6 | * Copyright (C) 2006 Malcolm Noyes | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License version 2 as | |
10 | * published by the Free Software Foundation. | |
11 | */ | |
12 | ||
13 | /* | |
99eeb8df | 14 | This is the AT91 MCI driver that has been tested with both MMC cards |
65dbf343 AV |
15 | and SD-cards. Boards that support write protect are now supported. |
16 | The CCAT91SBC001 board does not support SD cards. | |
17 | ||
18 | The three entry points are at91_mci_request, at91_mci_set_ios | |
19 | and at91_mci_get_ro. | |
20 | ||
21 | SET IOS | |
22 | This configures the device to put it into the correct mode and clock speed | |
23 | required. | |
24 | ||
25 | MCI REQUEST | |
26 | MCI request processes the commands sent in the mmc_request structure. This | |
27 | can consist of a processing command and a stop command in the case of | |
28 | multiple block transfers. | |
29 | ||
30 | There are three main types of request, commands, reads and writes. | |
31 | ||
32 | Commands are straight forward. The command is submitted to the controller and | |
33 | the request function returns. When the controller generates an interrupt to indicate | |
34 | the command is finished, the response to the command are read and the mmc_request_done | |
35 | function called to end the request. | |
36 | ||
37 | Reads and writes work in a similar manner to normal commands but involve the PDC (DMA) | |
38 | controller to manage the transfers. | |
39 | ||
40 | A read is done from the controller directly to the scatterlist passed in from the request. | |
99eeb8df AV |
41 | Due to a bug in the AT91RM9200 controller, when a read is completed, all the words are byte |
42 | swapped in the scatterlist buffers. AT91SAM926x are not affected by this bug. | |
65dbf343 AV |
43 | |
44 | The sequence of read interrupts is: ENDRX, RXBUFF, CMDRDY | |
45 | ||
46 | A write is slightly different in that the bytes to write are read from the scatterlist | |
47 | into a dma memory buffer (this is in case the source buffer should be read only). The | |
48 | entire write buffer is then done from this single dma memory buffer. | |
49 | ||
50 | The sequence of write interrupts is: ENDTX, TXBUFE, NOTBUSY, CMDRDY | |
51 | ||
52 | GET RO | |
53 | Gets the status of the write protect pin, if available. | |
54 | */ | |
55 | ||
65dbf343 AV |
56 | #include <linux/module.h> |
57 | #include <linux/moduleparam.h> | |
58 | #include <linux/init.h> | |
59 | #include <linux/ioport.h> | |
60 | #include <linux/platform_device.h> | |
61 | #include <linux/interrupt.h> | |
62 | #include <linux/blkdev.h> | |
63 | #include <linux/delay.h> | |
64 | #include <linux/err.h> | |
65 | #include <linux/dma-mapping.h> | |
66 | #include <linux/clk.h> | |
93a3ddc2 | 67 | #include <linux/atmel_pdc.h> |
65dbf343 AV |
68 | |
69 | #include <linux/mmc/host.h> | |
65dbf343 AV |
70 | |
71 | #include <asm/io.h> | |
72 | #include <asm/irq.h> | |
6e996ee8 DB |
73 | #include <asm/gpio.h> |
74 | ||
a09e64fb RK |
75 | #include <mach/board.h> |
76 | #include <mach/cpu.h> | |
77 | #include <mach/at91_mci.h> | |
65dbf343 AV |
78 | |
79 | #define DRIVER_NAME "at91_mci" | |
80 | ||
df05a303 AV |
81 | #define FL_SENT_COMMAND (1 << 0) |
82 | #define FL_SENT_STOP (1 << 1) | |
65dbf343 | 83 | |
df05a303 AV |
84 | #define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \ |
85 | | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \ | |
37b758e8 | 86 | | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE) |
65dbf343 | 87 | |
e0b19b83 AV |
88 | #define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg)) |
89 | #define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg)) | |
65dbf343 | 90 | |
3780d906 WM |
91 | #define MCI_BLKSIZE 512 |
92 | #define MCI_MAXBLKSIZE 4095 | |
93 | #define MCI_BLKATONCE 256 | |
94 | #define MCI_BUFSIZE (MCI_BLKSIZE * MCI_BLKATONCE) | |
65dbf343 AV |
95 | |
96 | /* | |
97 | * Low level type for this driver | |
98 | */ | |
99 | struct at91mci_host | |
100 | { | |
101 | struct mmc_host *mmc; | |
102 | struct mmc_command *cmd; | |
103 | struct mmc_request *request; | |
104 | ||
e0b19b83 | 105 | void __iomem *baseaddr; |
17ea0595 | 106 | int irq; |
e0b19b83 | 107 | |
65dbf343 AV |
108 | struct at91_mmc_data *board; |
109 | int present; | |
110 | ||
3dd3b039 AV |
111 | struct clk *mci_clk; |
112 | ||
65dbf343 AV |
113 | /* |
114 | * Flag indicating when the command has been sent. This is used to | |
115 | * work out whether or not to send the stop | |
116 | */ | |
117 | unsigned int flags; | |
118 | /* flag for current bus settings */ | |
119 | u32 bus_mode; | |
120 | ||
121 | /* DMA buffer used for transmitting */ | |
122 | unsigned int* buffer; | |
123 | dma_addr_t physical_address; | |
124 | unsigned int total_length; | |
125 | ||
126 | /* Latest in the scatterlist that has been enabled for transfer, but not freed */ | |
127 | int in_use_index; | |
128 | ||
129 | /* Latest in the scatterlist that has been enabled for transfer */ | |
130 | int transfer_index; | |
e181dce8 MP |
131 | |
132 | /* Timer for timeouts */ | |
133 | struct timer_list timer; | |
65dbf343 AV |
134 | }; |
135 | ||
c5a89c6c MP |
136 | /* |
137 | * Reset the controller and restore most of the state | |
138 | */ | |
139 | static void at91_reset_host(struct at91mci_host *host) | |
140 | { | |
141 | unsigned long flags; | |
142 | u32 mr; | |
143 | u32 sdcr; | |
144 | u32 dtor; | |
145 | u32 imr; | |
146 | ||
147 | local_irq_save(flags); | |
148 | imr = at91_mci_read(host, AT91_MCI_IMR); | |
149 | ||
150 | at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); | |
151 | ||
152 | /* save current state */ | |
153 | mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff; | |
154 | sdcr = at91_mci_read(host, AT91_MCI_SDCR); | |
155 | dtor = at91_mci_read(host, AT91_MCI_DTOR); | |
156 | ||
157 | /* reset the controller */ | |
158 | at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST); | |
159 | ||
160 | /* restore state */ | |
161 | at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN); | |
162 | at91_mci_write(host, AT91_MCI_MR, mr); | |
163 | at91_mci_write(host, AT91_MCI_SDCR, sdcr); | |
164 | at91_mci_write(host, AT91_MCI_DTOR, dtor); | |
165 | at91_mci_write(host, AT91_MCI_IER, imr); | |
166 | ||
167 | /* make sure sdio interrupts will fire */ | |
168 | at91_mci_read(host, AT91_MCI_SR); | |
169 | ||
170 | local_irq_restore(flags); | |
171 | } | |
172 | ||
e181dce8 MP |
173 | static void at91_timeout_timer(unsigned long data) |
174 | { | |
175 | struct at91mci_host *host; | |
176 | ||
177 | host = (struct at91mci_host *)data; | |
178 | ||
179 | if (host->request) { | |
180 | dev_err(host->mmc->parent, "Timeout waiting end of packet\n"); | |
181 | ||
182 | if (host->cmd && host->cmd->data) { | |
183 | host->cmd->data->error = -ETIMEDOUT; | |
184 | } else { | |
185 | if (host->cmd) | |
186 | host->cmd->error = -ETIMEDOUT; | |
187 | else | |
188 | host->request->cmd->error = -ETIMEDOUT; | |
189 | } | |
190 | ||
c5a89c6c | 191 | at91_reset_host(host); |
e181dce8 MP |
192 | mmc_request_done(host->mmc, host->request); |
193 | } | |
194 | } | |
195 | ||
65dbf343 AV |
196 | /* |
197 | * Copy from sg to a dma block - used for transfers | |
198 | */ | |
e8d04d3d | 199 | static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data) |
65dbf343 AV |
200 | { |
201 | unsigned int len, i, size; | |
202 | unsigned *dmabuf = host->buffer; | |
203 | ||
5385edc5 | 204 | size = data->blksz * data->blocks; |
65dbf343 AV |
205 | len = data->sg_len; |
206 | ||
5385edc5 VS |
207 | /* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */ |
208 | if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) | |
209 | if (host->total_length == 12) | |
210 | memset(dmabuf, 0, 12); | |
211 | ||
65dbf343 AV |
212 | /* |
213 | * Just loop through all entries. Size might not | |
214 | * be the entire list though so make sure that | |
215 | * we do not transfer too much. | |
216 | */ | |
217 | for (i = 0; i < len; i++) { | |
218 | struct scatterlist *sg; | |
219 | int amount; | |
65dbf343 AV |
220 | unsigned int *sgbuffer; |
221 | ||
222 | sg = &data->sg[i]; | |
223 | ||
45711f1a | 224 | sgbuffer = kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; |
65dbf343 AV |
225 | amount = min(size, sg->length); |
226 | size -= amount; | |
65dbf343 | 227 | |
99eeb8df AV |
228 | if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */ |
229 | int index; | |
230 | ||
231 | for (index = 0; index < (amount / 4); index++) | |
232 | *dmabuf++ = swab32(sgbuffer[index]); | |
5385edc5 | 233 | } else { |
0b3520f2 WM |
234 | char *tmpv = (char *)dmabuf; |
235 | memcpy(tmpv, sgbuffer, amount); | |
236 | tmpv += amount; | |
237 | dmabuf = (unsigned *)tmpv; | |
5385edc5 | 238 | } |
65dbf343 | 239 | |
0b3520f2 | 240 | kunmap_atomic(((void *)sgbuffer) - sg->offset, KM_BIO_SRC_IRQ); |
65dbf343 AV |
241 | |
242 | if (size == 0) | |
243 | break; | |
244 | } | |
245 | ||
246 | /* | |
247 | * Check that we didn't get a request to transfer | |
248 | * more data than can fit into the SG list. | |
249 | */ | |
250 | BUG_ON(size != 0); | |
251 | } | |
252 | ||
253 | /* | |
254 | * Prepare a dma read | |
255 | */ | |
e8d04d3d | 256 | static void at91_mci_pre_dma_read(struct at91mci_host *host) |
65dbf343 AV |
257 | { |
258 | int i; | |
259 | struct scatterlist *sg; | |
260 | struct mmc_command *cmd; | |
261 | struct mmc_data *data; | |
262 | ||
b44fb7a0 | 263 | pr_debug("pre dma read\n"); |
65dbf343 AV |
264 | |
265 | cmd = host->cmd; | |
266 | if (!cmd) { | |
b44fb7a0 | 267 | pr_debug("no command\n"); |
65dbf343 AV |
268 | return; |
269 | } | |
270 | ||
271 | data = cmd->data; | |
272 | if (!data) { | |
b44fb7a0 | 273 | pr_debug("no data\n"); |
65dbf343 AV |
274 | return; |
275 | } | |
276 | ||
277 | for (i = 0; i < 2; i++) { | |
278 | /* nothing left to transfer */ | |
279 | if (host->transfer_index >= data->sg_len) { | |
b44fb7a0 | 280 | pr_debug("Nothing left to transfer (index = %d)\n", host->transfer_index); |
65dbf343 AV |
281 | break; |
282 | } | |
283 | ||
284 | /* Check to see if this needs filling */ | |
285 | if (i == 0) { | |
93a3ddc2 | 286 | if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) { |
b44fb7a0 | 287 | pr_debug("Transfer active in current\n"); |
65dbf343 AV |
288 | continue; |
289 | } | |
290 | } | |
291 | else { | |
93a3ddc2 | 292 | if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) { |
b44fb7a0 | 293 | pr_debug("Transfer active in next\n"); |
65dbf343 AV |
294 | continue; |
295 | } | |
296 | } | |
297 | ||
298 | /* Setup the next transfer */ | |
b44fb7a0 | 299 | pr_debug("Using transfer index %d\n", host->transfer_index); |
65dbf343 AV |
300 | |
301 | sg = &data->sg[host->transfer_index++]; | |
b44fb7a0 | 302 | pr_debug("sg = %p\n", sg); |
65dbf343 | 303 | |
45711f1a | 304 | sg->dma_address = dma_map_page(NULL, sg_page(sg), sg->offset, sg->length, DMA_FROM_DEVICE); |
65dbf343 | 305 | |
b44fb7a0 | 306 | pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length); |
65dbf343 AV |
307 | |
308 | if (i == 0) { | |
93a3ddc2 | 309 | at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address); |
80f92546 | 310 | at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ? sg->length : sg->length / 4); |
65dbf343 AV |
311 | } |
312 | else { | |
93a3ddc2 | 313 | at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address); |
80f92546 | 314 | at91_mci_write(host, ATMEL_PDC_RNCR, (data->blksz & 0x3) ? sg->length : sg->length / 4); |
65dbf343 AV |
315 | } |
316 | } | |
317 | ||
b44fb7a0 | 318 | pr_debug("pre dma read done\n"); |
65dbf343 AV |
319 | } |
320 | ||
321 | /* | |
322 | * Handle after a dma read | |
323 | */ | |
e8d04d3d | 324 | static void at91_mci_post_dma_read(struct at91mci_host *host) |
65dbf343 AV |
325 | { |
326 | struct mmc_command *cmd; | |
327 | struct mmc_data *data; | |
328 | ||
b44fb7a0 | 329 | pr_debug("post dma read\n"); |
65dbf343 AV |
330 | |
331 | cmd = host->cmd; | |
332 | if (!cmd) { | |
b44fb7a0 | 333 | pr_debug("no command\n"); |
65dbf343 AV |
334 | return; |
335 | } | |
336 | ||
337 | data = cmd->data; | |
338 | if (!data) { | |
b44fb7a0 | 339 | pr_debug("no data\n"); |
65dbf343 AV |
340 | return; |
341 | } | |
342 | ||
343 | while (host->in_use_index < host->transfer_index) { | |
65dbf343 AV |
344 | struct scatterlist *sg; |
345 | ||
b44fb7a0 | 346 | pr_debug("finishing index %d\n", host->in_use_index); |
65dbf343 AV |
347 | |
348 | sg = &data->sg[host->in_use_index++]; | |
349 | ||
b44fb7a0 | 350 | pr_debug("Unmapping page %08X\n", sg->dma_address); |
65dbf343 AV |
351 | |
352 | dma_unmap_page(NULL, sg->dma_address, sg->length, DMA_FROM_DEVICE); | |
353 | ||
99eeb8df | 354 | if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */ |
ed99c541 | 355 | unsigned int *buffer; |
99eeb8df | 356 | int index; |
65dbf343 | 357 | |
ed99c541 | 358 | /* Swap the contents of the buffer */ |
45711f1a | 359 | buffer = kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; |
ed99c541 NF |
360 | pr_debug("buffer = %p, length = %d\n", buffer, sg->length); |
361 | ||
99eeb8df AV |
362 | for (index = 0; index < (sg->length / 4); index++) |
363 | buffer[index] = swab32(buffer[index]); | |
ed99c541 NF |
364 | |
365 | kunmap_atomic(buffer, KM_BIO_SRC_IRQ); | |
65dbf343 | 366 | } |
99eeb8df | 367 | |
45711f1a | 368 | flush_dcache_page(sg_page(sg)); |
4ac24a87 NF |
369 | |
370 | data->bytes_xfered += sg->length; | |
65dbf343 AV |
371 | } |
372 | ||
373 | /* Is there another transfer to trigger? */ | |
374 | if (host->transfer_index < data->sg_len) | |
e8d04d3d | 375 | at91_mci_pre_dma_read(host); |
65dbf343 | 376 | else { |
ed99c541 | 377 | at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_ENDRX); |
e0b19b83 | 378 | at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF); |
65dbf343 AV |
379 | } |
380 | ||
b44fb7a0 | 381 | pr_debug("post dma read done\n"); |
65dbf343 AV |
382 | } |
383 | ||
384 | /* | |
385 | * Handle transmitted data | |
386 | */ | |
387 | static void at91_mci_handle_transmitted(struct at91mci_host *host) | |
388 | { | |
389 | struct mmc_command *cmd; | |
390 | struct mmc_data *data; | |
391 | ||
b44fb7a0 | 392 | pr_debug("Handling the transmit\n"); |
65dbf343 AV |
393 | |
394 | /* Disable the transfer */ | |
93a3ddc2 | 395 | at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); |
65dbf343 AV |
396 | |
397 | /* Now wait for cmd ready */ | |
e0b19b83 | 398 | at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE); |
65dbf343 AV |
399 | |
400 | cmd = host->cmd; | |
401 | if (!cmd) return; | |
402 | ||
403 | data = cmd->data; | |
404 | if (!data) return; | |
405 | ||
be0192aa | 406 | if (cmd->data->blocks > 1) { |
ed99c541 NF |
407 | pr_debug("multiple write : wait for BLKE...\n"); |
408 | at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE); | |
409 | } else | |
410 | at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); | |
4ac24a87 NF |
411 | } |
412 | ||
413 | /* | |
414 | * Update bytes tranfered count during a write operation | |
415 | */ | |
416 | static void at91_mci_update_bytes_xfered(struct at91mci_host *host) | |
417 | { | |
418 | struct mmc_data *data; | |
ed99c541 | 419 | |
4ac24a87 NF |
420 | /* always deal with the effective request (and not the current cmd) */ |
421 | ||
422 | if (host->request->cmd && host->request->cmd->error != 0) | |
423 | return; | |
424 | ||
425 | if (host->request->data) { | |
426 | data = host->request->data; | |
427 | if (data->flags & MMC_DATA_WRITE) { | |
428 | /* card is in IDLE mode now */ | |
429 | pr_debug("-> bytes_xfered %d, total_length = %d\n", | |
430 | data->bytes_xfered, host->total_length); | |
5385edc5 | 431 | data->bytes_xfered = data->blksz * data->blocks; |
4ac24a87 NF |
432 | } |
433 | } | |
65dbf343 AV |
434 | } |
435 | ||
4ac24a87 | 436 | |
ed99c541 NF |
437 | /*Handle after command sent ready*/ |
438 | static int at91_mci_handle_cmdrdy(struct at91mci_host *host) | |
439 | { | |
440 | if (!host->cmd) | |
441 | return 1; | |
442 | else if (!host->cmd->data) { | |
443 | if (host->flags & FL_SENT_STOP) { | |
444 | /*After multi block write, we must wait for NOTBUSY*/ | |
445 | at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); | |
446 | } else return 1; | |
447 | } else if (host->cmd->data->flags & MMC_DATA_WRITE) { | |
448 | /*After sendding multi-block-write command, start DMA transfer*/ | |
4ac24a87 | 449 | at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE | AT91_MCI_BLKE); |
ed99c541 NF |
450 | at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); |
451 | } | |
452 | ||
453 | /* command not completed, have to wait */ | |
454 | return 0; | |
455 | } | |
456 | ||
457 | ||
65dbf343 AV |
458 | /* |
459 | * Enable the controller | |
460 | */ | |
e0b19b83 | 461 | static void at91_mci_enable(struct at91mci_host *host) |
65dbf343 | 462 | { |
ed99c541 NF |
463 | unsigned int mr; |
464 | ||
e0b19b83 | 465 | at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN); |
f3a8efa9 | 466 | at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); |
e0b19b83 | 467 | at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC); |
ed99c541 NF |
468 | mr = AT91_MCI_PDCMODE | 0x34a; |
469 | ||
470 | if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) | |
471 | mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF; | |
472 | ||
473 | at91_mci_write(host, AT91_MCI_MR, mr); | |
99eeb8df AV |
474 | |
475 | /* use Slot A or B (only one at same time) */ | |
476 | at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b); | |
65dbf343 AV |
477 | } |
478 | ||
479 | /* | |
480 | * Disable the controller | |
481 | */ | |
e0b19b83 | 482 | static void at91_mci_disable(struct at91mci_host *host) |
65dbf343 | 483 | { |
e0b19b83 | 484 | at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST); |
65dbf343 AV |
485 | } |
486 | ||
487 | /* | |
488 | * Send a command | |
65dbf343 | 489 | */ |
ed99c541 | 490 | static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd) |
65dbf343 AV |
491 | { |
492 | unsigned int cmdr, mr; | |
493 | unsigned int block_length; | |
494 | struct mmc_data *data = cmd->data; | |
495 | ||
496 | unsigned int blocks; | |
497 | unsigned int ier = 0; | |
498 | ||
499 | host->cmd = cmd; | |
500 | ||
ed99c541 | 501 | /* Needed for leaving busy state before CMD1 */ |
e0b19b83 | 502 | if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) { |
b44fb7a0 | 503 | pr_debug("Clearing timeout\n"); |
e0b19b83 AV |
504 | at91_mci_write(host, AT91_MCI_ARGR, 0); |
505 | at91_mci_write(host, AT91_MCI_CMDR, AT91_MCI_OPDCMD); | |
506 | while (!(at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_CMDRDY)) { | |
65dbf343 | 507 | /* spin */ |
e0b19b83 | 508 | pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR)); |
65dbf343 AV |
509 | } |
510 | } | |
ed99c541 | 511 | |
65dbf343 AV |
512 | cmdr = cmd->opcode; |
513 | ||
514 | if (mmc_resp_type(cmd) == MMC_RSP_NONE) | |
515 | cmdr |= AT91_MCI_RSPTYP_NONE; | |
516 | else { | |
517 | /* if a response is expected then allow maximum response latancy */ | |
518 | cmdr |= AT91_MCI_MAXLAT; | |
519 | /* set 136 bit response for R2, 48 bit response otherwise */ | |
520 | if (mmc_resp_type(cmd) == MMC_RSP_R2) | |
521 | cmdr |= AT91_MCI_RSPTYP_136; | |
522 | else | |
523 | cmdr |= AT91_MCI_RSPTYP_48; | |
524 | } | |
525 | ||
526 | if (data) { | |
1d4de9ed | 527 | |
9da3cbaf VS |
528 | if (cpu_is_at91rm9200() || cpu_is_at91sam9261()) { |
529 | if (data->blksz & 0x3) { | |
530 | pr_debug("Unsupported block size\n"); | |
531 | cmd->error = -EINVAL; | |
532 | mmc_request_done(host->mmc, host->request); | |
533 | return; | |
534 | } | |
535 | if (data->flags & MMC_DATA_STREAM) { | |
536 | pr_debug("Stream commands not supported\n"); | |
537 | cmd->error = -EINVAL; | |
538 | mmc_request_done(host->mmc, host->request); | |
539 | return; | |
540 | } | |
1d4de9ed MP |
541 | } |
542 | ||
a3fd4a1b | 543 | block_length = data->blksz; |
65dbf343 AV |
544 | blocks = data->blocks; |
545 | ||
546 | /* always set data start - also set direction flag for read */ | |
547 | if (data->flags & MMC_DATA_READ) | |
548 | cmdr |= (AT91_MCI_TRDIR | AT91_MCI_TRCMD_START); | |
549 | else if (data->flags & MMC_DATA_WRITE) | |
550 | cmdr |= AT91_MCI_TRCMD_START; | |
551 | ||
552 | if (data->flags & MMC_DATA_STREAM) | |
553 | cmdr |= AT91_MCI_TRTYP_STREAM; | |
be0192aa | 554 | if (data->blocks > 1) |
65dbf343 AV |
555 | cmdr |= AT91_MCI_TRTYP_MULTIPLE; |
556 | } | |
557 | else { | |
558 | block_length = 0; | |
559 | blocks = 0; | |
560 | } | |
561 | ||
b6cedb38 | 562 | if (host->flags & FL_SENT_STOP) |
65dbf343 AV |
563 | cmdr |= AT91_MCI_TRCMD_STOP; |
564 | ||
565 | if (host->bus_mode == MMC_BUSMODE_OPENDRAIN) | |
566 | cmdr |= AT91_MCI_OPDCMD; | |
567 | ||
568 | /* | |
569 | * Set the arguments and send the command | |
570 | */ | |
f3a8efa9 | 571 | pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08X)\n", |
e0b19b83 | 572 | cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR)); |
65dbf343 AV |
573 | |
574 | if (!data) { | |
93a3ddc2 AV |
575 | at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS); |
576 | at91_mci_write(host, ATMEL_PDC_RPR, 0); | |
577 | at91_mci_write(host, ATMEL_PDC_RCR, 0); | |
578 | at91_mci_write(host, ATMEL_PDC_RNPR, 0); | |
579 | at91_mci_write(host, ATMEL_PDC_RNCR, 0); | |
580 | at91_mci_write(host, ATMEL_PDC_TPR, 0); | |
581 | at91_mci_write(host, ATMEL_PDC_TCR, 0); | |
582 | at91_mci_write(host, ATMEL_PDC_TNPR, 0); | |
583 | at91_mci_write(host, ATMEL_PDC_TNCR, 0); | |
ed99c541 NF |
584 | ier = AT91_MCI_CMDRDY; |
585 | } else { | |
586 | /* zero block length and PDC mode */ | |
12bd2575 | 587 | mr = at91_mci_read(host, AT91_MCI_MR) & 0x5fff; |
80f92546 MP |
588 | mr |= (data->blksz & 0x3) ? AT91_MCI_PDCFBYTE : 0; |
589 | mr |= (block_length << 16); | |
590 | mr |= AT91_MCI_PDCMODE; | |
591 | at91_mci_write(host, AT91_MCI_MR, mr); | |
e0b19b83 | 592 | |
9da3cbaf | 593 | if (!(cpu_is_at91rm9200() || cpu_is_at91sam9261())) |
c5a89c6c MP |
594 | at91_mci_write(host, AT91_MCI_BLKR, |
595 | AT91_MCI_BLKR_BCNT(blocks) | | |
596 | AT91_MCI_BLKR_BLKLEN(block_length)); | |
597 | ||
ed99c541 NF |
598 | /* |
599 | * Disable the PDC controller | |
600 | */ | |
601 | at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); | |
65dbf343 | 602 | |
ed99c541 NF |
603 | if (cmdr & AT91_MCI_TRCMD_START) { |
604 | data->bytes_xfered = 0; | |
605 | host->transfer_index = 0; | |
606 | host->in_use_index = 0; | |
607 | if (cmdr & AT91_MCI_TRDIR) { | |
608 | /* | |
609 | * Handle a read | |
610 | */ | |
ed99c541 NF |
611 | host->total_length = 0; |
612 | ||
613 | at91_mci_pre_dma_read(host); | |
614 | ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */; | |
615 | } | |
616 | else { | |
617 | /* | |
618 | * Handle a write | |
619 | */ | |
620 | host->total_length = block_length * blocks; | |
5385edc5 VS |
621 | /* |
622 | * AT91SAM926[0/3] Data Write Operation and | |
623 | * number of bytes erratum | |
624 | */ | |
625 | if (cpu_is_at91sam9260 () || cpu_is_at91sam9263()) | |
626 | if (host->total_length < 12) | |
627 | host->total_length = 12; | |
e385ea63 | 628 | |
ed99c541 NF |
629 | at91_mci_sg_to_dma(host, data); |
630 | ||
631 | pr_debug("Transmitting %d bytes\n", host->total_length); | |
632 | ||
633 | at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address); | |
80f92546 MP |
634 | at91_mci_write(host, ATMEL_PDC_TCR, (data->blksz & 0x3) ? |
635 | host->total_length : host->total_length / 4); | |
636 | ||
ed99c541 NF |
637 | ier = AT91_MCI_CMDRDY; |
638 | } | |
65dbf343 AV |
639 | } |
640 | } | |
641 | ||
642 | /* | |
643 | * Send the command and then enable the PDC - not the other way round as | |
644 | * the data sheet says | |
645 | */ | |
646 | ||
e0b19b83 AV |
647 | at91_mci_write(host, AT91_MCI_ARGR, cmd->arg); |
648 | at91_mci_write(host, AT91_MCI_CMDR, cmdr); | |
65dbf343 AV |
649 | |
650 | if (cmdr & AT91_MCI_TRCMD_START) { | |
651 | if (cmdr & AT91_MCI_TRDIR) | |
93a3ddc2 | 652 | at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN); |
65dbf343 | 653 | } |
65dbf343 | 654 | |
ed99c541 | 655 | /* Enable selected interrupts */ |
df05a303 | 656 | at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier); |
65dbf343 AV |
657 | } |
658 | ||
659 | /* | |
660 | * Process the next step in the request | |
661 | */ | |
e8d04d3d | 662 | static void at91_mci_process_next(struct at91mci_host *host) |
65dbf343 AV |
663 | { |
664 | if (!(host->flags & FL_SENT_COMMAND)) { | |
665 | host->flags |= FL_SENT_COMMAND; | |
ed99c541 | 666 | at91_mci_send_command(host, host->request->cmd); |
65dbf343 AV |
667 | } |
668 | else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) { | |
669 | host->flags |= FL_SENT_STOP; | |
ed99c541 | 670 | at91_mci_send_command(host, host->request->stop); |
e181dce8 MP |
671 | } else { |
672 | del_timer(&host->timer); | |
c5a89c6c MP |
673 | /* the at91rm9200 mci controller hangs after some transfers, |
674 | * and the workaround is to reset it after each transfer. | |
675 | */ | |
676 | if (cpu_is_at91rm9200()) | |
677 | at91_reset_host(host); | |
65dbf343 | 678 | mmc_request_done(host->mmc, host->request); |
e181dce8 | 679 | } |
65dbf343 AV |
680 | } |
681 | ||
682 | /* | |
683 | * Handle a command that has been completed | |
684 | */ | |
ba7deeed | 685 | static void at91_mci_completed_command(struct at91mci_host *host, unsigned int status) |
65dbf343 AV |
686 | { |
687 | struct mmc_command *cmd = host->cmd; | |
fa1fe010 | 688 | struct mmc_data *data = cmd->data; |
65dbf343 | 689 | |
7a6588ba | 690 | at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); |
65dbf343 | 691 | |
e0b19b83 AV |
692 | cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0)); |
693 | cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1)); | |
694 | cmd->resp[2] = at91_mci_read(host, AT91_MCI_RSPR(2)); | |
695 | cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3)); | |
65dbf343 | 696 | |
ba7deeed NF |
697 | pr_debug("Status = %08X/%08x [%08X %08X %08X %08X]\n", |
698 | status, at91_mci_read(host, AT91_MCI_SR), | |
699 | cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); | |
65dbf343 | 700 | |
9e3866b5 | 701 | if (status & AT91_MCI_ERRORS) { |
b6cedb38 | 702 | if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) { |
17b0429d | 703 | cmd->error = 0; |
65dbf343 AV |
704 | } |
705 | else { | |
fa1fe010 NF |
706 | if (status & (AT91_MCI_DTOE | AT91_MCI_DCRCE)) { |
707 | if (data) { | |
708 | if (status & AT91_MCI_DTOE) | |
709 | data->error = -ETIMEDOUT; | |
710 | else if (status & AT91_MCI_DCRCE) | |
711 | data->error = -EILSEQ; | |
712 | } | |
713 | } else { | |
714 | if (status & AT91_MCI_RTOE) | |
715 | cmd->error = -ETIMEDOUT; | |
716 | else if (status & AT91_MCI_RCRCE) | |
717 | cmd->error = -EILSEQ; | |
718 | else | |
719 | cmd->error = -EIO; | |
720 | } | |
65dbf343 | 721 | |
fa1fe010 NF |
722 | pr_debug("Error detected and set to %d/%d (cmd = %d, retries = %d)\n", |
723 | cmd->error, data ? data->error : 0, | |
724 | cmd->opcode, cmd->retries); | |
65dbf343 AV |
725 | } |
726 | } | |
727 | else | |
17b0429d | 728 | cmd->error = 0; |
65dbf343 | 729 | |
e8d04d3d | 730 | at91_mci_process_next(host); |
65dbf343 AV |
731 | } |
732 | ||
733 | /* | |
734 | * Handle an MMC request | |
735 | */ | |
736 | static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq) | |
737 | { | |
738 | struct at91mci_host *host = mmc_priv(mmc); | |
739 | host->request = mrq; | |
740 | host->flags = 0; | |
741 | ||
a04ac5b9 WM |
742 | /* more than 1s timeout needed with slow SD cards */ |
743 | mod_timer(&host->timer, jiffies + msecs_to_jiffies(2000)); | |
e181dce8 | 744 | |
e8d04d3d | 745 | at91_mci_process_next(host); |
65dbf343 AV |
746 | } |
747 | ||
748 | /* | |
749 | * Set the IOS | |
750 | */ | |
751 | static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | |
752 | { | |
753 | int clkdiv; | |
754 | struct at91mci_host *host = mmc_priv(mmc); | |
3dd3b039 | 755 | unsigned long at91_master_clock = clk_get_rate(host->mci_clk); |
65dbf343 | 756 | |
b44fb7a0 | 757 | host->bus_mode = ios->bus_mode; |
65dbf343 AV |
758 | |
759 | if (ios->clock == 0) { | |
760 | /* Disable the MCI controller */ | |
e0b19b83 | 761 | at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS); |
65dbf343 AV |
762 | clkdiv = 0; |
763 | } | |
764 | else { | |
765 | /* Enable the MCI controller */ | |
e0b19b83 | 766 | at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN); |
65dbf343 AV |
767 | |
768 | if ((at91_master_clock % (ios->clock * 2)) == 0) | |
769 | clkdiv = ((at91_master_clock / ios->clock) / 2) - 1; | |
770 | else | |
771 | clkdiv = (at91_master_clock / ios->clock) / 2; | |
772 | ||
b44fb7a0 | 773 | pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv, |
65dbf343 AV |
774 | at91_master_clock / (2 * (clkdiv + 1))); |
775 | } | |
776 | if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) { | |
b44fb7a0 | 777 | pr_debug("MMC: Setting controller bus width to 4\n"); |
e0b19b83 | 778 | at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) | AT91_MCI_SDCBUS); |
65dbf343 AV |
779 | } |
780 | else { | |
b44fb7a0 | 781 | pr_debug("MMC: Setting controller bus width to 1\n"); |
e0b19b83 | 782 | at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS); |
65dbf343 AV |
783 | } |
784 | ||
785 | /* Set the clock divider */ | |
e0b19b83 | 786 | at91_mci_write(host, AT91_MCI_MR, (at91_mci_read(host, AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv); |
65dbf343 AV |
787 | |
788 | /* maybe switch power to the card */ | |
b44fb7a0 | 789 | if (host->board->vcc_pin) { |
65dbf343 AV |
790 | switch (ios->power_mode) { |
791 | case MMC_POWER_OFF: | |
6e996ee8 | 792 | gpio_set_value(host->board->vcc_pin, 0); |
65dbf343 AV |
793 | break; |
794 | case MMC_POWER_UP: | |
6e996ee8 | 795 | gpio_set_value(host->board->vcc_pin, 1); |
65dbf343 | 796 | break; |
e5c0ef90 MP |
797 | case MMC_POWER_ON: |
798 | break; | |
799 | default: | |
800 | WARN_ON(1); | |
65dbf343 AV |
801 | } |
802 | } | |
803 | } | |
804 | ||
805 | /* | |
806 | * Handle an interrupt | |
807 | */ | |
7d12e780 | 808 | static irqreturn_t at91_mci_irq(int irq, void *devid) |
65dbf343 AV |
809 | { |
810 | struct at91mci_host *host = devid; | |
811 | int completed = 0; | |
df05a303 | 812 | unsigned int int_status, int_mask; |
65dbf343 | 813 | |
e0b19b83 | 814 | int_status = at91_mci_read(host, AT91_MCI_SR); |
df05a303 | 815 | int_mask = at91_mci_read(host, AT91_MCI_IMR); |
37b758e8 | 816 | |
f3a8efa9 | 817 | pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask, |
df05a303 | 818 | int_status & int_mask); |
37b758e8 | 819 | |
df05a303 AV |
820 | int_status = int_status & int_mask; |
821 | ||
822 | if (int_status & AT91_MCI_ERRORS) { | |
65dbf343 | 823 | completed = 1; |
37b758e8 | 824 | |
df05a303 AV |
825 | if (int_status & AT91_MCI_UNRE) |
826 | pr_debug("MMC: Underrun error\n"); | |
827 | if (int_status & AT91_MCI_OVRE) | |
828 | pr_debug("MMC: Overrun error\n"); | |
829 | if (int_status & AT91_MCI_DTOE) | |
830 | pr_debug("MMC: Data timeout\n"); | |
831 | if (int_status & AT91_MCI_DCRCE) | |
832 | pr_debug("MMC: CRC error in data\n"); | |
833 | if (int_status & AT91_MCI_RTOE) | |
834 | pr_debug("MMC: Response timeout\n"); | |
835 | if (int_status & AT91_MCI_RENDE) | |
836 | pr_debug("MMC: Response end bit error\n"); | |
837 | if (int_status & AT91_MCI_RCRCE) | |
838 | pr_debug("MMC: Response CRC error\n"); | |
839 | if (int_status & AT91_MCI_RDIRE) | |
840 | pr_debug("MMC: Response direction error\n"); | |
841 | if (int_status & AT91_MCI_RINDE) | |
842 | pr_debug("MMC: Response index error\n"); | |
843 | } else { | |
844 | /* Only continue processing if no errors */ | |
65dbf343 | 845 | |
65dbf343 | 846 | if (int_status & AT91_MCI_TXBUFE) { |
b44fb7a0 | 847 | pr_debug("TX buffer empty\n"); |
65dbf343 AV |
848 | at91_mci_handle_transmitted(host); |
849 | } | |
850 | ||
ed99c541 NF |
851 | if (int_status & AT91_MCI_ENDRX) { |
852 | pr_debug("ENDRX\n"); | |
853 | at91_mci_post_dma_read(host); | |
854 | } | |
855 | ||
65dbf343 | 856 | if (int_status & AT91_MCI_RXBUFF) { |
b44fb7a0 | 857 | pr_debug("RX buffer full\n"); |
ed99c541 NF |
858 | at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); |
859 | at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_RXBUFF | AT91_MCI_ENDRX); | |
860 | completed = 1; | |
65dbf343 AV |
861 | } |
862 | ||
df05a303 | 863 | if (int_status & AT91_MCI_ENDTX) |
b44fb7a0 | 864 | pr_debug("Transmit has ended\n"); |
65dbf343 | 865 | |
65dbf343 | 866 | if (int_status & AT91_MCI_NOTBUSY) { |
b44fb7a0 | 867 | pr_debug("Card is ready\n"); |
4ac24a87 | 868 | at91_mci_update_bytes_xfered(host); |
ed99c541 | 869 | completed = 1; |
65dbf343 AV |
870 | } |
871 | ||
df05a303 | 872 | if (int_status & AT91_MCI_DTIP) |
b44fb7a0 | 873 | pr_debug("Data transfer in progress\n"); |
65dbf343 | 874 | |
ed99c541 | 875 | if (int_status & AT91_MCI_BLKE) { |
b44fb7a0 | 876 | pr_debug("Block transfer has ended\n"); |
4ac24a87 NF |
877 | if (host->request->data && host->request->data->blocks > 1) { |
878 | /* multi block write : complete multi write | |
879 | * command and send stop */ | |
880 | completed = 1; | |
881 | } else { | |
882 | at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); | |
883 | } | |
ed99c541 | 884 | } |
65dbf343 | 885 | |
7a6588ba EB |
886 | if (int_status & AT91_MCI_SDIOIRQA) |
887 | mmc_signal_sdio_irq(host->mmc); | |
888 | ||
889 | if (int_status & AT91_MCI_SDIOIRQB) | |
890 | mmc_signal_sdio_irq(host->mmc); | |
891 | ||
df05a303 | 892 | if (int_status & AT91_MCI_TXRDY) |
b44fb7a0 | 893 | pr_debug("Ready to transmit\n"); |
65dbf343 | 894 | |
df05a303 | 895 | if (int_status & AT91_MCI_RXRDY) |
b44fb7a0 | 896 | pr_debug("Ready to receive\n"); |
65dbf343 AV |
897 | |
898 | if (int_status & AT91_MCI_CMDRDY) { | |
b44fb7a0 | 899 | pr_debug("Command ready\n"); |
ed99c541 | 900 | completed = at91_mci_handle_cmdrdy(host); |
65dbf343 AV |
901 | } |
902 | } | |
65dbf343 AV |
903 | |
904 | if (completed) { | |
b44fb7a0 | 905 | pr_debug("Completed command\n"); |
7a6588ba | 906 | at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); |
ba7deeed | 907 | at91_mci_completed_command(host, int_status); |
df05a303 | 908 | } else |
7a6588ba | 909 | at91_mci_write(host, AT91_MCI_IDR, int_status & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); |
65dbf343 AV |
910 | |
911 | return IRQ_HANDLED; | |
912 | } | |
913 | ||
7d12e780 | 914 | static irqreturn_t at91_mmc_det_irq(int irq, void *_host) |
65dbf343 AV |
915 | { |
916 | struct at91mci_host *host = _host; | |
6e996ee8 | 917 | int present = !gpio_get_value(irq_to_gpio(irq)); |
65dbf343 AV |
918 | |
919 | /* | |
920 | * we expect this irq on both insert and remove, | |
921 | * and use a short delay to debounce. | |
922 | */ | |
923 | if (present != host->present) { | |
924 | host->present = present; | |
b44fb7a0 | 925 | pr_debug("%s: card %s\n", mmc_hostname(host->mmc), |
65dbf343 AV |
926 | present ? "insert" : "remove"); |
927 | if (!present) { | |
b44fb7a0 | 928 | pr_debug("****** Resetting SD-card bus width ******\n"); |
99eeb8df | 929 | at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS); |
65dbf343 | 930 | } |
a04ac5b9 WM |
931 | /* 0.5s needed because of early card detect switch firing */ |
932 | mmc_detect_change(host->mmc, msecs_to_jiffies(500)); | |
65dbf343 AV |
933 | } |
934 | return IRQ_HANDLED; | |
935 | } | |
936 | ||
a26b498c | 937 | static int at91_mci_get_ro(struct mmc_host *mmc) |
65dbf343 | 938 | { |
65dbf343 AV |
939 | struct at91mci_host *host = mmc_priv(mmc); |
940 | ||
08f80bb5 AV |
941 | if (host->board->wp_pin) |
942 | return !!gpio_get_value(host->board->wp_pin); | |
943 | /* | |
944 | * Board doesn't support read only detection; let the mmc core | |
945 | * decide what to do. | |
946 | */ | |
947 | return -ENOSYS; | |
65dbf343 AV |
948 | } |
949 | ||
7a6588ba EB |
950 | static void at91_mci_enable_sdio_irq(struct mmc_host *mmc, int enable) |
951 | { | |
952 | struct at91mci_host *host = mmc_priv(mmc); | |
953 | ||
954 | pr_debug("%s: sdio_irq %c : %s\n", mmc_hostname(host->mmc), | |
955 | host->board->slot_b ? 'B':'A', enable ? "enable" : "disable"); | |
956 | at91_mci_write(host, enable ? AT91_MCI_IER : AT91_MCI_IDR, | |
957 | host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA); | |
958 | ||
959 | } | |
960 | ||
ab7aefd0 | 961 | static const struct mmc_host_ops at91_mci_ops = { |
65dbf343 AV |
962 | .request = at91_mci_request, |
963 | .set_ios = at91_mci_set_ios, | |
964 | .get_ro = at91_mci_get_ro, | |
7a6588ba | 965 | .enable_sdio_irq = at91_mci_enable_sdio_irq, |
65dbf343 AV |
966 | }; |
967 | ||
968 | /* | |
969 | * Probe for the device | |
970 | */ | |
a26b498c | 971 | static int __init at91_mci_probe(struct platform_device *pdev) |
65dbf343 AV |
972 | { |
973 | struct mmc_host *mmc; | |
974 | struct at91mci_host *host; | |
17ea0595 | 975 | struct resource *res; |
65dbf343 AV |
976 | int ret; |
977 | ||
17ea0595 AV |
978 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
979 | if (!res) | |
980 | return -ENXIO; | |
981 | ||
982 | if (!request_mem_region(res->start, res->end - res->start + 1, DRIVER_NAME)) | |
983 | return -EBUSY; | |
984 | ||
65dbf343 AV |
985 | mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev); |
986 | if (!mmc) { | |
6e996ee8 DB |
987 | ret = -ENOMEM; |
988 | dev_dbg(&pdev->dev, "couldn't allocate mmc host\n"); | |
989 | goto fail6; | |
65dbf343 AV |
990 | } |
991 | ||
992 | mmc->ops = &at91_mci_ops; | |
993 | mmc->f_min = 375000; | |
994 | mmc->f_max = 25000000; | |
995 | mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; | |
23af6039 | 996 | mmc->caps = MMC_CAP_SDIO_IRQ; |
65dbf343 | 997 | |
3780d906 WM |
998 | mmc->max_blk_size = MCI_MAXBLKSIZE; |
999 | mmc->max_blk_count = MCI_BLKATONCE; | |
1000 | mmc->max_req_size = MCI_BUFSIZE; | |
fe4a3c7a | 1001 | |
65dbf343 AV |
1002 | host = mmc_priv(mmc); |
1003 | host->mmc = mmc; | |
65dbf343 AV |
1004 | host->bus_mode = 0; |
1005 | host->board = pdev->dev.platform_data; | |
1006 | if (host->board->wire4) { | |
ed99c541 NF |
1007 | if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) |
1008 | mmc->caps |= MMC_CAP_4_BIT_DATA; | |
1009 | else | |
6e996ee8 | 1010 | dev_warn(&pdev->dev, "4 wire bus mode not supported" |
ed99c541 | 1011 | " - using 1 wire\n"); |
65dbf343 AV |
1012 | } |
1013 | ||
3780d906 WM |
1014 | host->buffer = dma_alloc_coherent(&pdev->dev, MCI_BUFSIZE, |
1015 | &host->physical_address, GFP_KERNEL); | |
1016 | if (!host->buffer) { | |
1017 | ret = -ENOMEM; | |
1018 | dev_err(&pdev->dev, "Can't allocate transmit buffer\n"); | |
1019 | goto fail5; | |
1020 | } | |
1021 | ||
6e996ee8 DB |
1022 | /* |
1023 | * Reserve GPIOs ... board init code makes sure these pins are set | |
1024 | * up as GPIOs with the right direction (input, except for vcc) | |
1025 | */ | |
1026 | if (host->board->det_pin) { | |
1027 | ret = gpio_request(host->board->det_pin, "mmc_detect"); | |
1028 | if (ret < 0) { | |
1029 | dev_dbg(&pdev->dev, "couldn't claim card detect pin\n"); | |
3780d906 | 1030 | goto fail4b; |
6e996ee8 DB |
1031 | } |
1032 | } | |
1033 | if (host->board->wp_pin) { | |
1034 | ret = gpio_request(host->board->wp_pin, "mmc_wp"); | |
1035 | if (ret < 0) { | |
1036 | dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n"); | |
1037 | goto fail4; | |
1038 | } | |
1039 | } | |
1040 | if (host->board->vcc_pin) { | |
1041 | ret = gpio_request(host->board->vcc_pin, "mmc_vcc"); | |
1042 | if (ret < 0) { | |
1043 | dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n"); | |
1044 | goto fail3; | |
1045 | } | |
1046 | } | |
1047 | ||
65dbf343 AV |
1048 | /* |
1049 | * Get Clock | |
1050 | */ | |
3dd3b039 AV |
1051 | host->mci_clk = clk_get(&pdev->dev, "mci_clk"); |
1052 | if (IS_ERR(host->mci_clk)) { | |
6e996ee8 DB |
1053 | ret = -ENODEV; |
1054 | dev_dbg(&pdev->dev, "no mci_clk?\n"); | |
1055 | goto fail2; | |
65dbf343 | 1056 | } |
65dbf343 | 1057 | |
17ea0595 AV |
1058 | /* |
1059 | * Map I/O region | |
1060 | */ | |
1061 | host->baseaddr = ioremap(res->start, res->end - res->start + 1); | |
1062 | if (!host->baseaddr) { | |
6e996ee8 DB |
1063 | ret = -ENOMEM; |
1064 | goto fail1; | |
17ea0595 | 1065 | } |
e0b19b83 AV |
1066 | |
1067 | /* | |
1068 | * Reset hardware | |
1069 | */ | |
3dd3b039 | 1070 | clk_enable(host->mci_clk); /* Enable the peripheral clock */ |
e0b19b83 AV |
1071 | at91_mci_disable(host); |
1072 | at91_mci_enable(host); | |
1073 | ||
65dbf343 AV |
1074 | /* |
1075 | * Allocate the MCI interrupt | |
1076 | */ | |
17ea0595 | 1077 | host->irq = platform_get_irq(pdev, 0); |
6e996ee8 DB |
1078 | ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, |
1079 | mmc_hostname(mmc), host); | |
65dbf343 | 1080 | if (ret) { |
6e996ee8 DB |
1081 | dev_dbg(&pdev->dev, "request MCI interrupt failed\n"); |
1082 | goto fail0; | |
65dbf343 AV |
1083 | } |
1084 | ||
99ba0405 NF |
1085 | setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host); |
1086 | ||
65dbf343 AV |
1087 | platform_set_drvdata(pdev, mmc); |
1088 | ||
1089 | /* | |
1090 | * Add host to MMC layer | |
1091 | */ | |
63b66438 | 1092 | if (host->board->det_pin) { |
6e996ee8 | 1093 | host->present = !gpio_get_value(host->board->det_pin); |
63b66438 | 1094 | } |
65dbf343 AV |
1095 | else |
1096 | host->present = -1; | |
1097 | ||
1098 | mmc_add_host(mmc); | |
1099 | ||
1100 | /* | |
1101 | * monitor card insertion/removal if we can | |
1102 | */ | |
1103 | if (host->board->det_pin) { | |
6e996ee8 DB |
1104 | ret = request_irq(gpio_to_irq(host->board->det_pin), |
1105 | at91_mmc_det_irq, 0, mmc_hostname(mmc), host); | |
65dbf343 | 1106 | if (ret) |
6e996ee8 DB |
1107 | dev_warn(&pdev->dev, "request MMC detect irq failed\n"); |
1108 | else | |
1109 | device_init_wakeup(&pdev->dev, 1); | |
65dbf343 AV |
1110 | } |
1111 | ||
f3a8efa9 | 1112 | pr_debug("Added MCI driver\n"); |
65dbf343 AV |
1113 | |
1114 | return 0; | |
6e996ee8 DB |
1115 | |
1116 | fail0: | |
1117 | clk_disable(host->mci_clk); | |
1118 | iounmap(host->baseaddr); | |
1119 | fail1: | |
1120 | clk_put(host->mci_clk); | |
1121 | fail2: | |
1122 | if (host->board->vcc_pin) | |
1123 | gpio_free(host->board->vcc_pin); | |
1124 | fail3: | |
1125 | if (host->board->wp_pin) | |
1126 | gpio_free(host->board->wp_pin); | |
1127 | fail4: | |
1128 | if (host->board->det_pin) | |
1129 | gpio_free(host->board->det_pin); | |
3780d906 WM |
1130 | fail4b: |
1131 | if (host->buffer) | |
1132 | dma_free_coherent(&pdev->dev, MCI_BUFSIZE, | |
1133 | host->buffer, host->physical_address); | |
6e996ee8 DB |
1134 | fail5: |
1135 | mmc_free_host(mmc); | |
1136 | fail6: | |
1137 | release_mem_region(res->start, res->end - res->start + 1); | |
1138 | dev_err(&pdev->dev, "probe failed, err %d\n", ret); | |
1139 | return ret; | |
65dbf343 AV |
1140 | } |
1141 | ||
1142 | /* | |
1143 | * Remove a device | |
1144 | */ | |
a26b498c | 1145 | static int __exit at91_mci_remove(struct platform_device *pdev) |
65dbf343 AV |
1146 | { |
1147 | struct mmc_host *mmc = platform_get_drvdata(pdev); | |
1148 | struct at91mci_host *host; | |
17ea0595 | 1149 | struct resource *res; |
65dbf343 AV |
1150 | |
1151 | if (!mmc) | |
1152 | return -1; | |
1153 | ||
1154 | host = mmc_priv(mmc); | |
1155 | ||
3780d906 WM |
1156 | if (host->buffer) |
1157 | dma_free_coherent(&pdev->dev, MCI_BUFSIZE, | |
1158 | host->buffer, host->physical_address); | |
1159 | ||
e0cda54e | 1160 | if (host->board->det_pin) { |
6e996ee8 DB |
1161 | if (device_can_wakeup(&pdev->dev)) |
1162 | free_irq(gpio_to_irq(host->board->det_pin), host); | |
63b66438 | 1163 | device_init_wakeup(&pdev->dev, 0); |
6e996ee8 | 1164 | gpio_free(host->board->det_pin); |
65dbf343 AV |
1165 | } |
1166 | ||
e0b19b83 | 1167 | at91_mci_disable(host); |
e181dce8 | 1168 | del_timer_sync(&host->timer); |
17ea0595 AV |
1169 | mmc_remove_host(mmc); |
1170 | free_irq(host->irq, host); | |
65dbf343 | 1171 | |
3dd3b039 AV |
1172 | clk_disable(host->mci_clk); /* Disable the peripheral clock */ |
1173 | clk_put(host->mci_clk); | |
65dbf343 | 1174 | |
6e996ee8 DB |
1175 | if (host->board->vcc_pin) |
1176 | gpio_free(host->board->vcc_pin); | |
1177 | if (host->board->wp_pin) | |
1178 | gpio_free(host->board->wp_pin); | |
1179 | ||
17ea0595 AV |
1180 | iounmap(host->baseaddr); |
1181 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
1182 | release_mem_region(res->start, res->end - res->start + 1); | |
65dbf343 | 1183 | |
17ea0595 AV |
1184 | mmc_free_host(mmc); |
1185 | platform_set_drvdata(pdev, NULL); | |
b44fb7a0 | 1186 | pr_debug("MCI Removed\n"); |
65dbf343 AV |
1187 | |
1188 | return 0; | |
1189 | } | |
1190 | ||
1191 | #ifdef CONFIG_PM | |
1192 | static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state) | |
1193 | { | |
1194 | struct mmc_host *mmc = platform_get_drvdata(pdev); | |
63b66438 | 1195 | struct at91mci_host *host = mmc_priv(mmc); |
65dbf343 AV |
1196 | int ret = 0; |
1197 | ||
e0cda54e | 1198 | if (host->board->det_pin && device_may_wakeup(&pdev->dev)) |
63b66438 MP |
1199 | enable_irq_wake(host->board->det_pin); |
1200 | ||
65dbf343 AV |
1201 | if (mmc) |
1202 | ret = mmc_suspend_host(mmc, state); | |
1203 | ||
1204 | return ret; | |
1205 | } | |
1206 | ||
1207 | static int at91_mci_resume(struct platform_device *pdev) | |
1208 | { | |
1209 | struct mmc_host *mmc = platform_get_drvdata(pdev); | |
63b66438 | 1210 | struct at91mci_host *host = mmc_priv(mmc); |
65dbf343 AV |
1211 | int ret = 0; |
1212 | ||
e0cda54e | 1213 | if (host->board->det_pin && device_may_wakeup(&pdev->dev)) |
63b66438 MP |
1214 | disable_irq_wake(host->board->det_pin); |
1215 | ||
65dbf343 AV |
1216 | if (mmc) |
1217 | ret = mmc_resume_host(mmc); | |
1218 | ||
1219 | return ret; | |
1220 | } | |
1221 | #else | |
1222 | #define at91_mci_suspend NULL | |
1223 | #define at91_mci_resume NULL | |
1224 | #endif | |
1225 | ||
1226 | static struct platform_driver at91_mci_driver = { | |
a26b498c | 1227 | .remove = __exit_p(at91_mci_remove), |
65dbf343 AV |
1228 | .suspend = at91_mci_suspend, |
1229 | .resume = at91_mci_resume, | |
1230 | .driver = { | |
1231 | .name = DRIVER_NAME, | |
1232 | .owner = THIS_MODULE, | |
1233 | }, | |
1234 | }; | |
1235 | ||
1236 | static int __init at91_mci_init(void) | |
1237 | { | |
a26b498c | 1238 | return platform_driver_probe(&at91_mci_driver, at91_mci_probe); |
65dbf343 AV |
1239 | } |
1240 | ||
1241 | static void __exit at91_mci_exit(void) | |
1242 | { | |
1243 | platform_driver_unregister(&at91_mci_driver); | |
1244 | } | |
1245 | ||
1246 | module_init(at91_mci_init); | |
1247 | module_exit(at91_mci_exit); | |
1248 | ||
1249 | MODULE_DESCRIPTION("AT91 Multimedia Card Interface driver"); | |
1250 | MODULE_AUTHOR("Nick Randell"); | |
1251 | MODULE_LICENSE("GPL"); | |
bc65c724 | 1252 | MODULE_ALIAS("platform:at91_mci"); |