Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Misc strange devices | |
3 | # | |
4 | ||
7bf1fc43 | 5 | menuconfig MISC_DEVICES |
376df37a JE |
6 | bool "Misc devices" |
7 | default y | |
06bfb7eb JE |
8 | ---help--- |
9 | Say Y here to get to see options for device drivers from various | |
10 | different categories. This option alone does not add any kernel code. | |
11 | ||
12 | If you say N, all options in this submenu will be skipped and disabled. | |
376df37a | 13 | |
7bf1fc43 | 14 | if MISC_DEVICES |
1da177e4 | 15 | |
9a1e8eb1 DB |
16 | config ATMEL_PWM |
17 | tristate "Atmel AT32/AT91 PWM support" | |
8b6e47ad | 18 | depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 |
9a1e8eb1 DB |
19 | help |
20 | This option enables device driver support for the PWM channels | |
692105b8 ML |
21 | on certain Atmel processors. Pulse Width Modulation is used for |
22 | purposes including software controlled power-efficient backlights | |
9a1e8eb1 DB |
23 | on LCD displays, motor control, and waveform generation. |
24 | ||
2a341f5c DB |
25 | config ATMEL_TCLIB |
26 | bool "Atmel AT32/AT91 Timer/Counter Library" | |
27 | depends on (AVR32 || ARCH_AT91) | |
28 | help | |
29 | Select this if you want a library to allocate the Timer/Counter | |
30 | blocks found on many Atmel processors. This facilitates using | |
31 | these blocks by different drivers despite processor differences. | |
32 | ||
4d243f92 DB |
33 | config ATMEL_TCB_CLKSRC |
34 | bool "TC Block Clocksource" | |
35 | depends on ATMEL_TCLIB && GENERIC_TIME | |
36 | default y | |
37 | help | |
38 | Select this to get a high precision clocksource based on a | |
39 | TC block with a 5+ MHz base clock rate. Two timer channels | |
40 | are combined to make a single 32-bit timer. | |
41 | ||
42 | When GENERIC_CLOCKEVENTS is defined, the third timer channel | |
43 | may be used as a clock event device supporting oneshot mode | |
44 | (delays of up to two seconds) based on the 32 KiHz clock. | |
45 | ||
46 | config ATMEL_TCB_CLKSRC_BLOCK | |
47 | int | |
48 | depends on ATMEL_TCB_CLKSRC | |
49 | prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X | |
50 | default 0 | |
51 | range 0 1 | |
52 | help | |
53 | Some chips provide more than one TC block, so you have the | |
54 | choice of which one to use for the clock framework. The other | |
55 | TC can be used for other purposes, such as PWM generation and | |
56 | interval timing. | |
57 | ||
1da177e4 LT |
58 | config IBM_ASM |
59 | tristate "Device driver for IBM RSA service processor" | |
ff294cba | 60 | depends on X86 && PCI && INPUT && EXPERIMENTAL |
1da177e4 LT |
61 | ---help--- |
62 | This option enables device driver support for in-band access to the | |
63 | IBM RSA (Condor) service processor in eServer xSeries systems. | |
64 | The ibmasm device driver allows user space application to access | |
65 | ASM (Advanced Systems Management) functions on the service | |
66 | processor. The driver is meant to be used in conjunction with | |
67 | a user space API. | |
68 | The ibmasm driver also enables the OS to use the UART on the | |
69 | service processor board as a regular serial port. To make use of | |
70 | this feature serial driver support (CONFIG_SERIAL_8250) must be | |
71 | enabled. | |
f9565129 | 72 | |
1da177e4 LT |
73 | WARNING: This software may not be supported or function |
74 | correctly on your IBM server. Please consult the IBM ServerProven | |
01e77d31 | 75 | website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for |
1da177e4 LT |
76 | information on the specific driver level and support statement |
77 | for your IBM server. | |
78 | ||
cef2cf07 | 79 | config PHANTOM |
ec905a18 | 80 | tristate "Sensable PHANToM (PCI)" |
cef2cf07 JS |
81 | depends on PCI |
82 | help | |
83 | Say Y here if you want to build a driver for Sensable PHANToM device. | |
84 | ||
ec905a18 JS |
85 | This driver is only for PCI PHANToMs. |
86 | ||
cef2cf07 JS |
87 | If you choose to build module, its name will be phantom. If unsure, |
88 | say N here. | |
89 | ||
59f14800 BC |
90 | config SGI_IOC4 |
91 | tristate "SGI IOC4 Base IO support" | |
aa6c2e62 | 92 | depends on PCI |
59f14800 BC |
93 | ---help--- |
94 | This option enables basic support for the IOC4 chip on certain | |
95 | SGI IO controller cards (IO9, IO10, and PCI-RT). This option | |
96 | does not enable any specific functions on such a card, but provides | |
97 | necessary infrastructure for other drivers to utilize. | |
98 | ||
99 | If you have an SGI Altix with an IOC4-based card say Y. | |
100 | Otherwise say N. | |
101 | ||
f9565129 AD |
102 | config TIFM_CORE |
103 | tristate "TI Flash Media interface support (EXPERIMENTAL)" | |
9f3bed5f | 104 | depends on EXPERIMENTAL && PCI |
f9565129 AD |
105 | help |
106 | If you want support for Texas Instruments(R) Flash Media adapters | |
107 | you should select this option and then also choose an appropriate | |
108 | host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter | |
109 | support', if you have a TI PCI74xx compatible card reader, for | |
110 | example. | |
111 | You will also have to select some flash card format drivers. MMC/SD | |
112 | cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD | |
113 | Interface support (MMC_TIFM_SD)'. | |
114 | ||
8c36790a | 115 | To compile this driver as a module, choose M here: the module will |
f9565129 | 116 | be called tifm_core. |
1da177e4 | 117 | |
f9565129 AD |
118 | config TIFM_7XX1 |
119 | tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)" | |
120 | depends on PCI && TIFM_CORE && EXPERIMENTAL | |
121 | default TIFM_CORE | |
122 | help | |
123 | This option enables support for Texas Instruments(R) PCI74xx and | |
124 | PCI76xx families of Flash Media adapters, found in many laptops. | |
125 | To make actual use of the device, you will have to select some | |
126 | flash card format drivers, as outlined in the TIFM_CORE Help. | |
127 | ||
8c36790a | 128 | To compile this driver as a module, choose M here: the module will |
f9565129 AD |
129 | be called tifm_7xx1. |
130 | ||
a412ae3f DW |
131 | config ICS932S401 |
132 | tristate "Integrated Circuits ICS932S401" | |
133 | depends on I2C && EXPERIMENTAL | |
134 | help | |
135 | If you say yes here you get support for the Integrated Circuits | |
136 | ICS932S401 clock control chips. | |
137 | ||
138 | This driver can also be built as a module. If so, the module | |
139 | will be called ics932s401. | |
140 | ||
eb1f2930 HCE |
141 | config ATMEL_SSC |
142 | tristate "Device driver for Atmel SSC peripheral" | |
143 | depends on AVR32 || ARCH_AT91 | |
144 | ---help--- | |
692105b8 | 145 | This option enables device driver support for Atmel Synchronized |
eb1f2930 HCE |
146 | Serial Communication peripheral (SSC). |
147 | ||
148 | The SSC peripheral supports a wide variety of serial frame based | |
149 | communications, i.e. I2S, SPI, etc. | |
150 | ||
151 | If unsure, say N. | |
152 | ||
d569d5bb JB |
153 | config ENCLOSURE_SERVICES |
154 | tristate "Enclosure Services" | |
155 | default n | |
156 | help | |
157 | Provides support for intelligent enclosures (bays which | |
158 | contain storage devices). You also need either a host | |
159 | driver (SCSI/ATA) which supports enclosures | |
160 | or a SCSI enclosure device (SES) to use these services. | |
161 | ||
45d9ca49 DN |
162 | config SGI_XP |
163 | tristate "Support communication between SGI SSIs" | |
3b0de7b3 | 164 | depends on NET |
03b48632 | 165 | depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP |
45d9ca49 DN |
166 | select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 |
167 | select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 | |
1bc4faa5 | 168 | select SGI_GRU if X86_64 && SMP |
45d9ca49 DN |
169 | ---help--- |
170 | An SGI machine can be divided into multiple Single System | |
171 | Images which act independently of each other and have | |
172 | hardware based memory protection from the others. Enabling | |
173 | this feature will allow for direct communication between SSIs | |
174 | based on a network adapter and DMA messaging. | |
175 | ||
89bcb05d DA |
176 | config HP_ILO |
177 | tristate "Channel interface driver for HP iLO/iLO2 processor" | |
f38954c9 | 178 | depends on PCI |
89bcb05d DA |
179 | default n |
180 | help | |
181 | The channel interface driver allows applications to communicate | |
182 | with iLO/iLO2 management processors present on HP ProLiant | |
183 | servers. Upon loading, the driver creates /dev/hpilo/dXccbN files, | |
184 | which can be used to gather data from the management processor, | |
185 | via read and write system calls. | |
186 | ||
187 | To compile this driver as a module, choose M here: the | |
188 | module will be called hpilo. | |
189 | ||
3d919e5f JS |
190 | config SGI_GRU |
191 | tristate "SGI GRU driver" | |
1bc4faa5 | 192 | depends on X86_UV && SMP |
3d919e5f JS |
193 | default n |
194 | select MMU_NOTIFIER | |
195 | ---help--- | |
196 | The GRU is a hardware resource located in the system chipset. The GRU | |
197 | contains memory that can be mmapped into the user address space. This memory is | |
198 | used to communicate with the GRU to perform functions such as load/store, | |
199 | scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user | |
200 | instructions using user virtual addresses. GRU instructions (ex., bcopy) use | |
201 | user virtual addresses for operands. | |
202 | ||
203 | If you are not running on a SGI UV system, say N. | |
204 | ||
205 | config SGI_GRU_DEBUG | |
206 | bool "SGI GRU driver debug" | |
207 | depends on SGI_GRU | |
208 | default n | |
209 | ---help--- | |
210 | This option enables addition debugging code for the SGI GRU driver. If | |
211 | you are unsure, say N. | |
212 | ||
ad8f07cc MG |
213 | config DELL_LAPTOP |
214 | tristate "Dell Laptop Extras (EXPERIMENTAL)" | |
215 | depends on X86 | |
216 | depends on DCDBAS | |
217 | depends on EXPERIMENTAL | |
218 | depends on BACKLIGHT_CLASS_DEVICE | |
219 | depends on RFKILL | |
77a59265 | 220 | depends on POWER_SUPPLY |
ad8f07cc MG |
221 | default n |
222 | ---help--- | |
223 | This driver adds support for rfkill and backlight control to Dell | |
224 | laptops. | |
225 | ||
3cdbbeeb DM |
226 | config ISL29003 |
227 | tristate "Intersil ISL29003 ambient light sensor" | |
228 | depends on I2C && SYSFS | |
229 | help | |
230 | If you say yes here you get support for the Intersil ISL29003 | |
231 | ambient light sensor. | |
232 | ||
233 | This driver can also be built as a module. If so, the module | |
234 | will be called isl29003. | |
235 | ||
4e17e1db | 236 | source "drivers/misc/c2port/Kconfig" |
5195e509 | 237 | source "drivers/misc/eeprom/Kconfig" |
5f5bac82 | 238 | source "drivers/misc/cb710/Kconfig" |
4e17e1db | 239 | |
7bf1fc43 | 240 | endif # MISC_DEVICES |