Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * bt856 - BT856A Digital Video Encoder (Rockwell Part) | |
3 | * | |
4 | * Copyright (C) 1999 Mike Bernson <mike@mlb.org> | |
5 | * Copyright (C) 1998 Dave Perks <dperks@ibm.net> | |
6 | * | |
7 | * Modifications for LML33/DC10plus unified driver | |
8 | * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> | |
9 | * | |
10 | * This code was modify/ported from the saa7111 driver written | |
11 | * by Dave Perks. | |
12 | * | |
13 | * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net> | |
14 | * - moved over to linux>=2.4.x i2c protocol (9/9/2002) | |
15 | * | |
16 | * This program is free software; you can redistribute it and/or modify | |
17 | * it under the terms of the GNU General Public License as published by | |
18 | * the Free Software Foundation; either version 2 of the License, or | |
19 | * (at your option) any later version. | |
20 | * | |
21 | * This program is distributed in the hope that it will be useful, | |
22 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
23 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
24 | * GNU General Public License for more details. | |
25 | * | |
26 | * You should have received a copy of the GNU General Public License | |
27 | * along with this program; if not, write to the Free Software | |
28 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
29 | */ | |
30 | ||
31 | #include <linux/module.h> | |
32 | #include <linux/init.h> | |
33 | #include <linux/delay.h> | |
34 | #include <linux/errno.h> | |
35 | #include <linux/fs.h> | |
36 | #include <linux/kernel.h> | |
37 | #include <linux/major.h> | |
38 | #include <linux/slab.h> | |
39 | #include <linux/mm.h> | |
40 | #include <linux/pci.h> | |
41 | #include <linux/signal.h> | |
42 | #include <asm/io.h> | |
43 | #include <asm/pgtable.h> | |
44 | #include <asm/page.h> | |
45 | #include <linux/sched.h> | |
46 | #include <asm/segment.h> | |
47 | #include <linux/types.h> | |
48 | ||
49 | #include <linux/videodev.h> | |
50 | #include <asm/uaccess.h> | |
51 | ||
52 | MODULE_DESCRIPTION("Brooktree-856A video encoder driver"); | |
53 | MODULE_AUTHOR("Mike Bernson & Dave Perks"); | |
54 | MODULE_LICENSE("GPL"); | |
55 | ||
56 | #include <linux/i2c.h> | |
57 | #include <linux/i2c-dev.h> | |
58 | ||
59 | #define I2C_NAME(s) (s)->name | |
60 | ||
61 | #include <linux/video_encoder.h> | |
62 | ||
63 | static int debug = 0; | |
64 | module_param(debug, int, 0); | |
65 | MODULE_PARM_DESC(debug, "Debug level (0-1)"); | |
66 | ||
67 | #define dprintk(num, format, args...) \ | |
68 | do { \ | |
69 | if (debug >= num) \ | |
70 | printk(format, ##args); \ | |
71 | } while (0) | |
72 | ||
73 | /* ----------------------------------------------------------------------- */ | |
74 | ||
75 | #define REG_OFFSET 0xCE | |
76 | ||
77 | struct bt856 { | |
78 | unsigned char reg[32]; | |
79 | ||
80 | int norm; | |
81 | int enable; | |
82 | int bright; | |
83 | int contrast; | |
84 | int hue; | |
85 | int sat; | |
86 | }; | |
87 | ||
88 | #define I2C_BT856 0x88 | |
89 | ||
90 | /* ----------------------------------------------------------------------- */ | |
91 | ||
92 | static inline int | |
93 | bt856_write (struct i2c_client *client, | |
94 | u8 reg, | |
95 | u8 value) | |
96 | { | |
97 | struct bt856 *encoder = i2c_get_clientdata(client); | |
98 | ||
99 | encoder->reg[reg - REG_OFFSET] = value; | |
100 | return i2c_smbus_write_byte_data(client, reg, value); | |
101 | } | |
102 | ||
103 | static inline int | |
104 | bt856_setbit (struct i2c_client *client, | |
105 | u8 reg, | |
106 | u8 bit, | |
107 | u8 value) | |
108 | { | |
109 | struct bt856 *encoder = i2c_get_clientdata(client); | |
110 | ||
111 | return bt856_write(client, reg, | |
112 | (encoder-> | |
113 | reg[reg - REG_OFFSET] & ~(1 << bit)) | | |
114 | (value ? (1 << bit) : 0)); | |
115 | } | |
116 | ||
117 | static void | |
118 | bt856_dump (struct i2c_client *client) | |
119 | { | |
120 | int i; | |
121 | struct bt856 *encoder = i2c_get_clientdata(client); | |
122 | ||
123 | printk(KERN_INFO "%s: register dump:", I2C_NAME(client)); | |
124 | for (i = 0xd6; i <= 0xde; i += 2) | |
125 | printk(" %02x", encoder->reg[i - REG_OFFSET]); | |
126 | printk("\n"); | |
127 | } | |
128 | ||
129 | /* ----------------------------------------------------------------------- */ | |
130 | ||
131 | static int | |
132 | bt856_command (struct i2c_client *client, | |
133 | unsigned int cmd, | |
134 | void *arg) | |
135 | { | |
136 | struct bt856 *encoder = i2c_get_clientdata(client); | |
137 | ||
138 | switch (cmd) { | |
139 | ||
140 | case 0: | |
141 | /* This is just for testing!!! */ | |
142 | dprintk(1, KERN_INFO "bt856: init\n"); | |
143 | bt856_write(client, 0xdc, 0x18); | |
144 | bt856_write(client, 0xda, 0); | |
145 | bt856_write(client, 0xde, 0); | |
146 | ||
147 | bt856_setbit(client, 0xdc, 3, 1); | |
148 | //bt856_setbit(client, 0xdc, 6, 0); | |
149 | bt856_setbit(client, 0xdc, 4, 1); | |
150 | ||
151 | switch (encoder->norm) { | |
152 | ||
153 | case VIDEO_MODE_NTSC: | |
154 | bt856_setbit(client, 0xdc, 2, 0); | |
155 | break; | |
156 | ||
157 | case VIDEO_MODE_PAL: | |
158 | bt856_setbit(client, 0xdc, 2, 1); | |
159 | break; | |
160 | } | |
161 | ||
162 | bt856_setbit(client, 0xdc, 1, 1); | |
163 | bt856_setbit(client, 0xde, 4, 0); | |
164 | bt856_setbit(client, 0xde, 3, 1); | |
165 | if (debug != 0) | |
166 | bt856_dump(client); | |
167 | break; | |
168 | ||
169 | case ENCODER_GET_CAPABILITIES: | |
170 | { | |
171 | struct video_encoder_capability *cap = arg; | |
172 | ||
173 | dprintk(1, KERN_INFO "%s: get capabilities\n", | |
174 | I2C_NAME(client)); | |
175 | ||
176 | cap->flags = VIDEO_ENCODER_PAL | | |
177 | VIDEO_ENCODER_NTSC | | |
178 | VIDEO_ENCODER_CCIR; | |
179 | cap->inputs = 2; | |
180 | cap->outputs = 1; | |
181 | } | |
182 | break; | |
183 | ||
184 | case ENCODER_SET_NORM: | |
185 | { | |
186 | int *iarg = arg; | |
187 | ||
188 | dprintk(1, KERN_INFO "%s: set norm %d\n", I2C_NAME(client), | |
189 | *iarg); | |
190 | ||
191 | switch (*iarg) { | |
192 | ||
193 | case VIDEO_MODE_NTSC: | |
194 | bt856_setbit(client, 0xdc, 2, 0); | |
195 | break; | |
196 | ||
197 | case VIDEO_MODE_PAL: | |
198 | bt856_setbit(client, 0xdc, 2, 1); | |
199 | bt856_setbit(client, 0xda, 0, 0); | |
200 | //bt856_setbit(client, 0xda, 0, 1); | |
201 | break; | |
202 | ||
203 | default: | |
204 | return -EINVAL; | |
205 | ||
206 | } | |
207 | encoder->norm = *iarg; | |
208 | if (debug != 0) | |
209 | bt856_dump(client); | |
210 | } | |
211 | break; | |
212 | ||
213 | case ENCODER_SET_INPUT: | |
214 | { | |
215 | int *iarg = arg; | |
216 | ||
217 | dprintk(1, KERN_INFO "%s: set input %d\n", I2C_NAME(client), | |
218 | *iarg); | |
219 | ||
220 | /* We only have video bus. | |
221 | * iarg = 0: input is from bt819 | |
222 | * iarg = 1: input is from ZR36060 */ | |
223 | ||
224 | switch (*iarg) { | |
225 | ||
226 | case 0: | |
227 | bt856_setbit(client, 0xde, 4, 0); | |
228 | bt856_setbit(client, 0xde, 3, 1); | |
229 | bt856_setbit(client, 0xdc, 3, 1); | |
230 | bt856_setbit(client, 0xdc, 6, 0); | |
231 | break; | |
232 | case 1: | |
233 | bt856_setbit(client, 0xde, 4, 0); | |
234 | bt856_setbit(client, 0xde, 3, 1); | |
235 | bt856_setbit(client, 0xdc, 3, 1); | |
236 | bt856_setbit(client, 0xdc, 6, 1); | |
237 | break; | |
238 | case 2: // Color bar | |
239 | bt856_setbit(client, 0xdc, 3, 0); | |
240 | bt856_setbit(client, 0xde, 4, 1); | |
241 | break; | |
242 | default: | |
243 | return -EINVAL; | |
244 | ||
245 | } | |
246 | ||
247 | if (debug != 0) | |
248 | bt856_dump(client); | |
249 | } | |
250 | break; | |
251 | ||
252 | case ENCODER_SET_OUTPUT: | |
253 | { | |
254 | int *iarg = arg; | |
255 | ||
256 | dprintk(1, KERN_INFO "%s: set output %d\n", I2C_NAME(client), | |
257 | *iarg); | |
258 | ||
259 | /* not much choice of outputs */ | |
260 | if (*iarg != 0) { | |
261 | return -EINVAL; | |
262 | } | |
263 | } | |
264 | break; | |
265 | ||
266 | case ENCODER_ENABLE_OUTPUT: | |
267 | { | |
268 | int *iarg = arg; | |
269 | ||
270 | encoder->enable = !!*iarg; | |
271 | ||
272 | dprintk(1, KERN_INFO "%s: enable output %d\n", | |
273 | I2C_NAME(client), encoder->enable); | |
274 | } | |
275 | break; | |
276 | ||
277 | default: | |
278 | return -EINVAL; | |
279 | } | |
280 | ||
281 | return 0; | |
282 | } | |
283 | ||
284 | /* ----------------------------------------------------------------------- */ | |
285 | ||
286 | /* | |
287 | * Generic i2c probe | |
288 | * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' | |
289 | */ | |
290 | static unsigned short normal_i2c[] = { I2C_BT856 >> 1, I2C_CLIENT_END }; | |
291 | static unsigned short normal_i2c_range[] = { I2C_CLIENT_END }; | |
292 | ||
293 | static unsigned short probe[2] = { I2C_CLIENT_END, I2C_CLIENT_END }; | |
294 | static unsigned short probe_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END }; | |
295 | static unsigned short ignore[2] = { I2C_CLIENT_END, I2C_CLIENT_END }; | |
296 | static unsigned short ignore_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END }; | |
297 | static unsigned short force[2] = { I2C_CLIENT_END , I2C_CLIENT_END }; | |
298 | ||
299 | static struct i2c_client_address_data addr_data = { | |
300 | .normal_i2c = normal_i2c, | |
301 | .normal_i2c_range = normal_i2c_range, | |
302 | .probe = probe, | |
303 | .probe_range = probe_range, | |
304 | .ignore = ignore, | |
305 | .ignore_range = ignore_range, | |
306 | .force = force | |
307 | }; | |
308 | ||
309 | static struct i2c_driver i2c_driver_bt856; | |
310 | ||
311 | static int | |
312 | bt856_detect_client (struct i2c_adapter *adapter, | |
313 | int address, | |
314 | int kind) | |
315 | { | |
316 | int i; | |
317 | struct i2c_client *client; | |
318 | struct bt856 *encoder; | |
319 | ||
320 | dprintk(1, | |
321 | KERN_INFO | |
322 | "bt856.c: detecting bt856 client on address 0x%x\n", | |
323 | address << 1); | |
324 | ||
325 | /* Check if the adapter supports the needed features */ | |
326 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
327 | return 0; | |
328 | ||
329 | client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); | |
330 | if (client == 0) | |
331 | return -ENOMEM; | |
332 | memset(client, 0, sizeof(struct i2c_client)); | |
333 | client->addr = address; | |
334 | client->adapter = adapter; | |
335 | client->driver = &i2c_driver_bt856; | |
336 | client->flags = I2C_CLIENT_ALLOW_USE; | |
337 | strlcpy(I2C_NAME(client), "bt856", sizeof(I2C_NAME(client))); | |
338 | ||
339 | encoder = kmalloc(sizeof(struct bt856), GFP_KERNEL); | |
340 | if (encoder == NULL) { | |
341 | kfree(client); | |
342 | return -ENOMEM; | |
343 | } | |
344 | memset(encoder, 0, sizeof(struct bt856)); | |
345 | encoder->norm = VIDEO_MODE_NTSC; | |
346 | encoder->enable = 1; | |
347 | i2c_set_clientdata(client, encoder); | |
348 | ||
349 | i = i2c_attach_client(client); | |
350 | if (i) { | |
351 | kfree(client); | |
352 | kfree(encoder); | |
353 | return i; | |
354 | } | |
355 | ||
356 | bt856_write(client, 0xdc, 0x18); | |
357 | bt856_write(client, 0xda, 0); | |
358 | bt856_write(client, 0xde, 0); | |
359 | ||
360 | bt856_setbit(client, 0xdc, 3, 1); | |
361 | //bt856_setbit(client, 0xdc, 6, 0); | |
362 | bt856_setbit(client, 0xdc, 4, 1); | |
363 | ||
364 | switch (encoder->norm) { | |
365 | ||
366 | case VIDEO_MODE_NTSC: | |
367 | bt856_setbit(client, 0xdc, 2, 0); | |
368 | break; | |
369 | ||
370 | case VIDEO_MODE_PAL: | |
371 | bt856_setbit(client, 0xdc, 2, 1); | |
372 | break; | |
373 | } | |
374 | ||
375 | bt856_setbit(client, 0xdc, 1, 1); | |
376 | bt856_setbit(client, 0xde, 4, 0); | |
377 | bt856_setbit(client, 0xde, 3, 1); | |
378 | ||
379 | if (debug != 0) | |
380 | bt856_dump(client); | |
381 | ||
382 | dprintk(1, KERN_INFO "%s_attach: at address 0x%x\n", I2C_NAME(client), | |
383 | client->addr << 1); | |
384 | ||
385 | return 0; | |
386 | } | |
387 | ||
388 | static int | |
389 | bt856_attach_adapter (struct i2c_adapter *adapter) | |
390 | { | |
391 | dprintk(1, | |
392 | KERN_INFO | |
393 | "bt856.c: starting probe for adapter %s (0x%x)\n", | |
394 | I2C_NAME(adapter), adapter->id); | |
395 | return i2c_probe(adapter, &addr_data, &bt856_detect_client); | |
396 | } | |
397 | ||
398 | static int | |
399 | bt856_detach_client (struct i2c_client *client) | |
400 | { | |
401 | struct bt856 *encoder = i2c_get_clientdata(client); | |
402 | int err; | |
403 | ||
404 | err = i2c_detach_client(client); | |
405 | if (err) { | |
406 | return err; | |
407 | } | |
408 | ||
409 | kfree(encoder); | |
410 | kfree(client); | |
411 | ||
412 | return 0; | |
413 | } | |
414 | ||
415 | /* ----------------------------------------------------------------------- */ | |
416 | ||
417 | static struct i2c_driver i2c_driver_bt856 = { | |
418 | .owner = THIS_MODULE, | |
419 | .name = "bt856", | |
420 | ||
421 | .id = I2C_DRIVERID_BT856, | |
422 | .flags = I2C_DF_NOTIFY, | |
423 | ||
424 | .attach_adapter = bt856_attach_adapter, | |
425 | .detach_client = bt856_detach_client, | |
426 | .command = bt856_command, | |
427 | }; | |
428 | ||
429 | static int __init | |
430 | bt856_init (void) | |
431 | { | |
432 | return i2c_add_driver(&i2c_driver_bt856); | |
433 | } | |
434 | ||
435 | static void __exit | |
436 | bt856_exit (void) | |
437 | { | |
438 | i2c_del_driver(&i2c_driver_bt856); | |
439 | } | |
440 | ||
441 | module_init(bt856_init); | |
442 | module_exit(bt856_exit); |