[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / media / radio / Kconfig

#
# Multimedia Video device configuration
#

menuconfig RADIO_ADAPTERS
	bool "Radio Adapters"
	depends on VIDEO_V4L2
	default y
	---help---
	  Say Y here to enable selecting AM/FM radio adapters.

if RADIO_ADAPTERS && VIDEO_V4L2

config RADIO_CADET
	tristate "ADS Cadet AM/FM Tuner"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these AM/FM radio cards, and then
	  fill in the port address below.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  Further documentation on this driver can be found on the WWW at
	  <http://linux.blackhawke.net/cadet/>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-cadet.

config RADIO_RTRACK
	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  Note that newer AIMSlab RadioTrack cards have a different chipset
	  and are not supported by this driver.  For these cards, use the
	  RadioTrack II driver below.

	  If you have a GemTeks combined (PnP) sound- and radio card you must
	  use this driver as a module and setup the card with isapnptools.
	  You must also pass the module a suitable io parameter, 0x248 has
	  been reported to be used by these cards.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>. More information is
	  contained in the file
	  <file:Documentation/video4linux/radiotrack.txt>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-aimslab.

config RADIO_RTRACK_PORT
	hex "RadioTrack i/o port (0x20f or 0x30f)"
	depends on RADIO_RTRACK=y
	default "20f"
	help
	  Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
	  haven't changed the jumper setting on the card.

config RADIO_RTRACK2
	tristate "AIMSlab RadioTrack II support"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have this FM radio card, and then fill in the
	  port address below.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-rtrack2.

config RADIO_RTRACK2_PORT
	hex "RadioTrack II i/o port (0x20c or 0x30c)"
	depends on RADIO_RTRACK2=y
	default "30c"
	help
	  Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
	  haven't changed the jumper setting on the card.

config RADIO_AZTECH
	tristate "Aztech/Packard Bell Radio"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-aztech.

config RADIO_AZTECH_PORT
	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
	depends on RADIO_AZTECH=y
	default "350"
	help
	  Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
	  haven't changed the setting of jumper JP3 on the card.  Removing the
	  jumper sets the card to 0x358.

config RADIO_GEMTEK
	tristate "GemTek Radio card (or compatible) support"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have this FM radio card, and then fill in the
	  I/O port address and settings below. The following cards either have
	  GemTek Radio tuner or are rebranded GemTek Radio cards:

	  - Sound Vision 16 Gold with FM Radio
	  - Typhoon Radio card (some models)
	  - Hama Radio card

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-gemtek.

config RADIO_GEMTEK_PORT
	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
	depends on RADIO_GEMTEK=y
	default "34c"
	help
	  Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
	  0x34c, if you haven't changed the jumper setting on the card. On
	  Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
	  port is 0x20c, 0x248 or 0x28c.
	  If automatic I/O port probing is enabled this port will be used only
	  in case of automatic probing failure, ie. as a fallback.

config RADIO_GEMTEK_PROBE
	bool "Automatic I/O port probing"
	depends on RADIO_GEMTEK=y
	default y
	help
	  Say Y here to enable automatic probing for GemTek Radio card. The
	  following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
	  0x28c.

config RADIO_MAXIRADIO
	tristate "Guillemot MAXI Radio FM 2000 radio"
	depends on VIDEO_V4L2 && PCI
	---help---
	  Choose Y here if you have this radio card.  This card may also be
	  found as Gemtek PCI FM.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-maxiradio.

config RADIO_MIROPCM20
	tristate "miroSOUND PCM20 radio"
	depends on ISA && VIDEO_V4L2 && SND
	select SND_ISA
	select SND_MIRO
	---help---
	  Choose Y here if you have this FM radio card. You also need to enable
	  the ALSA sound system. This choice automatically selects the ALSA
	  sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
	  is required for the radio-miropcm20.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-miropcm20.

config RADIO_SF16FMI
	tristate "SF16-FMI/SF16-FMP Radio"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these FM radio cards.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-sf16fmi.

config RADIO_SF16FMR2
	tristate "SF16FMR2 Radio"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these FM radio cards.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found on the WWW at
	  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-sf16fmr2.

config RADIO_TERRATEC
	tristate "TerraTec ActiveRadio ISA Standalone"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have this FM radio card, and then fill in the
	  port address below. (TODO)

	  Note: This driver is in its early stages.  Right now volume and
	  frequency control and muting works at least for me, but
	  unfortunately I have not found anybody who wants to use this card
	  with Linux.  So if it is this what YOU are trying to do right now,
	  PLEASE DROP ME A NOTE!!  Rolf Offermanns <rolf@offermanns.de>.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-terratec.

config RADIO_TERRATEC_PORT
	hex "Terratec i/o port (normally 0x590)"
	depends on RADIO_TERRATEC=y
	default "590"
	help
	  Fill in the I/O port of your TerraTec FM radio card. If unsure, go
	  with the default.

config RADIO_TRUST
	tristate "Trust FM radio card"
	depends on ISA && VIDEO_V4L2
	help
	  This is a driver for the Trust FM radio cards. Say Y if you have
	  such a card and want to use it under Linux.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-trust.

config RADIO_TRUST_PORT
	hex "Trust i/o port (usually 0x350 or 0x358)"
	depends on RADIO_TRUST=y
	default "350"
	help
	  Enter the I/O port of your Trust FM radio card. If unsure, try the
	  values "0x350" or "0x358".

config RADIO_TYPHOON
	tristate "Typhoon Radio (a.k.a. EcoRadio)"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address and the frequency used for muting below.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-typhoon.

config RADIO_TYPHOON_PORT
	hex "Typhoon I/O port (0x316 or 0x336)"
	depends on RADIO_TYPHOON=y
	default "316"
	help
	  Enter the I/O port of your Typhoon or EcoRadio radio card.

config RADIO_TYPHOON_MUTEFREQ
	int "Typhoon frequency set when muting the device (kHz)"
	depends on RADIO_TYPHOON=y
	default "87500"
	help
	  Enter the frequency used for muting the radio. The device is never
	  completely silent. If the volume is just turned down, you can still
	  hear silent voices and music. For that reason, the frequency of the
	  radio device is set to the frequency you can enter here whenever
	  the device is muted. There should be no local radio station at that
	  frequency.

config RADIO_ZOLTRIX
	tristate "Zoltrix Radio"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-zoltrix.

config RADIO_ZOLTRIX_PORT
	hex "ZOLTRIX I/O port (0x20c or 0x30c)"
	depends on RADIO_ZOLTRIX=y
	default "20c"
	help
	  Enter the I/O port of your Zoltrix radio card.

config I2C_SI4713
	tristate "I2C driver for Silicon Labs Si4713 device"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want support to Si4713 I2C device.
	  This device driver supports only i2c bus.

	  To compile this driver as a module, choose M here: the
	  module will be called si4713.

config RADIO_SI4713
	tristate "Silicon Labs Si4713 FM Radio Transmitter support"
	depends on I2C && VIDEO_V4L2
	select I2C_SI4713
	---help---
	  Say Y here if you want support to Si4713 FM Radio Transmitter.
	  This device can transmit audio through FM. It can transmit
	  RDS and RBDS signals as well. This module is the v4l2 radio
	  interface for the i2c driver of this device.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-si4713.

config USB_DSBR
	tristate "D-Link/GemTek USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of radio to your
	  computer's USB port. Note that the audio is not digital, and
	  you must connect the line out connector to a sound card or a
	  set of speakers.

	  To compile this driver as a module, choose M here: the
	  module will be called dsbr100.

config RADIO_SI470X
	bool "Silicon Labs Si470x FM Radio Receiver support"
	depends on VIDEO_V4L2

source "drivers/media/radio/si470x/Kconfig"

config USB_MR800
	tristate "AverMedia MR 800 USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of radio to your
	  computer's USB port. Note that the audio is not digital, and
	  you must connect the line out connector to a sound card or a
	  set of speakers.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-mr800.

config RADIO_TEA5764
	tristate "TEA5764 I2C FM radio support"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the TEA5764 FM chip found in
	  EZX phones. This FM chip is present in EZX phones from Motorola,
	  connected to internal pxa I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-tea5764.

config RADIO_TEA5764_XTAL
	bool "TEA5764 crystal reference"
	depends on RADIO_TEA5764=y
	default y
	help
	  Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
	  here if TEA5764 reference frequency is connected in FREQIN.

config RADIO_SAA7706H
	tristate "SAA7706H Car Radio DSP"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the SAA7706H Car radio Digital
	  Signal Processor, found for instance on the Russellville development
	  board. On the russellville the device is connected to internal
	  timberdale I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called SAA7706H.

config RADIO_TEF6862
	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the TEF6862 Car Radio Enhanced
	  Selectivity Tuner, found for instance on the Russellville development
	  board. On the russellville the device is connected to internal
	  timberdale I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called TEF6862.

config RADIO_TIMBERDALE
	tristate "Enable the Timberdale radio driver"
	depends on MFD_TIMBERDALE && VIDEO_V4L2
	depends on I2C	# for RADIO_SAA7706H
	select RADIO_TEF6862
	select RADIO_SAA7706H
	---help---
	  This is a kind of umbrella driver for the Radio Tuner and DSP
	  found behind the Timberdale FPGA on the Russellville board.
	  Enabling this driver will automatically select the DSP and tuner.

config RADIO_WL1273
	tristate "Texas Instruments WL1273 I2C FM Radio"
	depends on I2C && VIDEO_V4L2
	select MFD_CORE
	select MFD_WL1273_CORE
	select FW_LOADER
	---help---
	  Choose Y here if you have this FM radio chip.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux 2 API.  Information on
	  this API and pointers to "v4l2" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-wl1273.

# TI's ST based wl128x FM radio
source "drivers/media/radio/wl128x/Kconfig"

endif # RADIO_ADAPTERS
Commit	Line	Data
1da177e4 LT	1	#
	2	# Multimedia Video device configuration
	3	#
	4
c5da5afb JE	5	menuconfig RADIO_ADAPTERS
c5da5afb JE	6	bool "Radio Adapters"
057596ee	7	depends on VIDEO_V4L2
c5da5afb	8	default y
ff01652c MCC	9	---help---
ff01652c MCC	10	Say Y here to enable selecting AM/FM radio adapters.
c5da5afb	11
057596ee	12	if RADIO_ADAPTERS && VIDEO_V4L2
1da177e4 LT	13
	14	config RADIO_CADET
	15	tristate "ADS Cadet AM/FM Tuner"
c0c7fa09	16	depends on ISA && VIDEO_V4L2
1da177e4 LT	17	---help---
	18	Choose Y here if you have one of these AM/FM radio cards, and then
	19	fill in the port address below.
	20
	21	In order to control your radio card, you will need to use programs
	22	that are compatible with the Video For Linux API. Information on
	23	this API and pointers to "v4l" programs may be found at
	24	<file:Documentation/video4linux/API.html>.
	25
	26	Further documentation on this driver can be found on the WWW at
	27	<http://linux.blackhawke.net/cadet/>.
	28
	29	To compile this driver as a module, choose M here: the
	30	module will be called radio-cadet.
	31
	32	config RADIO_RTRACK
	33	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
46ff2c72	34	depends on ISA && VIDEO_V4L2
1da177e4 LT	35	---help---
	36	Choose Y here if you have one of these FM radio cards, and then fill
	37	in the port address below.
	38
	39	Note that newer AIMSlab RadioTrack cards have a different chipset
	40	and are not supported by this driver. For these cards, use the
	41	RadioTrack II driver below.
	42
	43	If you have a GemTeks combined (PnP) sound- and radio card you must
	44	use this driver as a module and setup the card with isapnptools.
	45	You must also pass the module a suitable io parameter, 0x248 has
	46	been reported to be used by these cards.
	47
	48	In order to control your radio card, you will need to use programs
	49	that are compatible with the Video For Linux API. Information on
	50	this API and pointers to "v4l" programs may be found at
	51	<file:Documentation/video4linux/API.html>. More information is
	52	contained in the file
	53	<file:Documentation/video4linux/radiotrack.txt>.
	54
	55	To compile this driver as a module, choose M here: the
	56	module will be called radio-aimslab.
	57
	58	config RADIO_RTRACK_PORT
	59	hex "RadioTrack i/o port (0x20f or 0x30f)"
	60	depends on RADIO_RTRACK=y
	61	default "20f"
	62	help
	63	Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
	64	haven't changed the jumper setting on the card.
	65
	66	config RADIO_RTRACK2
	67	tristate "AIMSlab RadioTrack II support"
f8c559f8	68	depends on ISA && VIDEO_V4L2
1da177e4 LT	69	---help---
	70	Choose Y here if you have this FM radio card, and then fill in the
	71	port address below.
	72
	73	In order to control your radio card, you will need to use programs
	74	that are compatible with the Video For Linux API. Information on
	75	this API and pointers to "v4l" programs may be found at
	76	<file:Documentation/video4linux/API.html>.
	77
	78	To compile this driver as a module, choose M here: the
	79	module will be called radio-rtrack2.
	80
	81	config RADIO_RTRACK2_PORT
	82	hex "RadioTrack II i/o port (0x20c or 0x30c)"
	83	depends on RADIO_RTRACK2=y
	84	default "30c"
	85	help
	86	Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
	87	haven't changed the jumper setting on the card.
	88
	89	config RADIO_AZTECH
	90	tristate "Aztech/Packard Bell Radio"
a4366af4	91	depends on ISA && VIDEO_V4L2
1da177e4 LT	92	---help---
	93	Choose Y here if you have one of these FM radio cards, and then fill
	94	in the port address below.
	95
	96	In order to control your radio card, you will need to use programs
	97	that are compatible with the Video For Linux API. Information on
	98	this API and pointers to "v4l" programs may be found at
	99	<file:Documentation/video4linux/API.html>.
	100
	101	To compile this driver as a module, choose M here: the
	102	module will be called radio-aztech.
	103
	104	config RADIO_AZTECH_PORT
	105	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
	106	depends on RADIO_AZTECH=y
	107	default "350"
	108	help
	109	Enter either 0x350 or 0x358 here. The card default is 0x350, if you
	110	haven't changed the setting of jumper JP3 on the card. Removing the
	111	jumper sets the card to 0x358.
	112
	113	config RADIO_GEMTEK
3e7589c5	114	tristate "GemTek Radio card (or compatible) support"
d1c4ecde	115	depends on ISA && VIDEO_V4L2
1da177e4 LT	116	---help---
1da177e4 LT	117	Choose Y here if you have this FM radio card, and then fill in the
3e7589c5 PS	118	I/O port address and settings below. The following cards either have
	119	GemTek Radio tuner or are rebranded GemTek Radio cards:
	120
	121	- Sound Vision 16 Gold with FM Radio
	122	- Typhoon Radio card (some models)
	123	- Hama Radio card
1da177e4 LT	124
	125	In order to control your radio card, you will need to use programs
	126	that are compatible with the Video For Linux API. Information on
	127	this API and pointers to "v4l" programs may be found at
	128	<file:Documentation/video4linux/API.html>.
	129
	130	To compile this driver as a module, choose M here: the
	131	module will be called radio-gemtek.
	132
	133	config RADIO_GEMTEK_PORT
3e7589c5	134	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
1da177e4 LT	135	depends on RADIO_GEMTEK=y
	136	default "34c"
	137	help
	138	Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
	139	0x34c, if you haven't changed the jumper setting on the card. On
	140	Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
3e7589c5 PS	141	port is 0x20c, 0x248 or 0x28c.
	142	If automatic I/O port probing is enabled this port will be used only
	143	in case of automatic probing failure, ie. as a fallback.
	144
	145	config RADIO_GEMTEK_PROBE
	146	bool "Automatic I/O port probing"
	147	depends on RADIO_GEMTEK=y
	148	default y
	149	help
	150	Say Y here to enable automatic probing for GemTek Radio card. The
	151	following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
	152	0x28c.
1da177e4	153
1da177e4 LT	154	config RADIO_MAXIRADIO
1da177e4 LT	155	tristate "Guillemot MAXI Radio FM 2000 radio"
e84fef6b	156	depends on VIDEO_V4L2 && PCI
1da177e4 LT	157	---help---
	158	Choose Y here if you have this radio card. This card may also be
	159	found as Gemtek PCI FM.
	160
	161	In order to control your radio card, you will need to use programs
	162	that are compatible with the Video For Linux API. Information on
	163	this API and pointers to "v4l" programs may be found at
	164	<file:Documentation/video4linux/API.html>.
	165
	166	To compile this driver as a module, choose M here: the
	167	module will be called radio-maxiradio.
	168
8366fc39 KH	169	config RADIO_MIROPCM20
8366fc39 KH	170	tristate "miroSOUND PCM20 radio"
dd7cdb88 RD	171	depends on ISA && VIDEO_V4L2 && SND
dd7cdb88 RD	172	select SND_ISA
8366fc39 KH	173	select SND_MIRO
	174	---help---
	175	Choose Y here if you have this FM radio card. You also need to enable
	176	the ALSA sound system. This choice automatically selects the ALSA
	177	sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
	178	is required for the radio-miropcm20.
	179
	180	In order to control your radio card, you will need to use programs
	181	that are compatible with the Video For Linux API. Information on
	182	this API and pointers to "v4l" programs may be found at
	183	<file:Documentation/video4linux/API.html>.
	184
	185	To compile this driver as a module, choose M here: the
	186	module will be called radio-miropcm20.
1da177e4	187
1da177e4	188	config RADIO_SF16FMI
4b830374	189	tristate "SF16-FMI/SF16-FMP Radio"
a2ef73af	190	depends on ISA && VIDEO_V4L2
1da177e4	191	---help---
67cabf50	192	Choose Y here if you have one of these FM radio cards.
1da177e4 LT	193
	194	In order to control your radio card, you will need to use programs
	195	that are compatible with the Video For Linux API. Information on
	196	this API and pointers to "v4l" programs may be found at
	197	<file:Documentation/video4linux/API.html>.
	198
	199	To compile this driver as a module, choose M here: the
	200	module will be called radio-sf16fmi.
	201
	202	config RADIO_SF16FMR2
	203	tristate "SF16FMR2 Radio"
acda0e71	204	depends on ISA && VIDEO_V4L2
1da177e4 LT	205	---help---
	206	Choose Y here if you have one of these FM radio cards.
	207
	208	In order to control your radio card, you will need to use programs
	209	that are compatible with the Video For Linux API. Information on
	210	this API and pointers to "v4l" programs may be found on the WWW at
	211	<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
	212
	213	To compile this driver as a module, choose M here: the
	214	module will be called radio-sf16fmr2.
	215
	216	config RADIO_TERRATEC
	217	tristate "TerraTec ActiveRadio ISA Standalone"
55ac7b69	218	depends on ISA && VIDEO_V4L2
1da177e4 LT	219	---help---
	220	Choose Y here if you have this FM radio card, and then fill in the
	221	port address below. (TODO)
	222
	223	Note: This driver is in its early stages. Right now volume and
	224	frequency control and muting works at least for me, but
	225	unfortunately I have not found anybody who wants to use this card
	226	with Linux. So if it is this what YOU are trying to do right now,
	227	PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>.
	228
	229	In order to control your radio card, you will need to use programs
	230	that are compatible with the Video For Linux API. Information on
	231	this API and pointers to "v4l" programs may be found at
	232	<file:Documentation/video4linux/API.html>.
	233
	234	To compile this driver as a module, choose M here: the
	235	module will be called radio-terratec.
	236
	237	config RADIO_TERRATEC_PORT
	238	hex "Terratec i/o port (normally 0x590)"
	239	depends on RADIO_TERRATEC=y
	240	default "590"
	241	help
	242	Fill in the I/O port of your TerraTec FM radio card. If unsure, go
	243	with the default.
	244
	245	config RADIO_TRUST
	246	tristate "Trust FM radio card"
982eddb9	247	depends on ISA && VIDEO_V4L2
1da177e4 LT	248	help
	249	This is a driver for the Trust FM radio cards. Say Y if you have
	250	such a card and want to use it under Linux.
	251
	252	To compile this driver as a module, choose M here: the
	253	module will be called radio-trust.
	254
	255	config RADIO_TRUST_PORT
	256	hex "Trust i/o port (usually 0x350 or 0x358)"
	257	depends on RADIO_TRUST=y
	258	default "350"
	259	help
	260	Enter the I/O port of your Trust FM radio card. If unsure, try the
	261	values "0x350" or "0x358".
	262
	263	config RADIO_TYPHOON
	264	tristate "Typhoon Radio (a.k.a. EcoRadio)"
30c48305	265	depends on ISA && VIDEO_V4L2
1da177e4 LT	266	---help---
	267	Choose Y here if you have one of these FM radio cards, and then fill
	268	in the port address and the frequency used for muting below.
	269
	270	In order to control your radio card, you will need to use programs
	271	that are compatible with the Video For Linux API. Information on
	272	this API and pointers to "v4l" programs may be found at
	273	<file:Documentation/video4linux/API.html>.
	274
	275	To compile this driver as a module, choose M here: the
	276	module will be called radio-typhoon.
	277
1da177e4 LT	278	config RADIO_TYPHOON_PORT
	279	hex "Typhoon I/O port (0x316 or 0x336)"
	280	depends on RADIO_TYPHOON=y
	281	default "316"
	282	help
	283	Enter the I/O port of your Typhoon or EcoRadio radio card.
	284
	285	config RADIO_TYPHOON_MUTEFREQ
	286	int "Typhoon frequency set when muting the device (kHz)"
	287	depends on RADIO_TYPHOON=y
	288	default "87500"
	289	help
	290	Enter the frequency used for muting the radio. The device is never
	291	completely silent. If the volume is just turned down, you can still
	292	hear silent voices and music. For that reason, the frequency of the
	293	radio device is set to the frequency you can enter here whenever
	294	the device is muted. There should be no local radio station at that
	295	frequency.
	296
	297	config RADIO_ZOLTRIX
	298	tristate "Zoltrix Radio"
2ab65299	299	depends on ISA && VIDEO_V4L2
1da177e4 LT	300	---help---
	301	Choose Y here if you have one of these FM radio cards, and then fill
	302	in the port address below.
	303
	304	In order to control your radio card, you will need to use programs
	305	that are compatible with the Video For Linux API. Information on
	306	this API and pointers to "v4l" programs may be found at
	307	<file:Documentation/video4linux/API.html>.
	308
	309	To compile this driver as a module, choose M here: the
	310	module will be called radio-zoltrix.
	311
	312	config RADIO_ZOLTRIX_PORT
	313	hex "ZOLTRIX I/O port (0x20c or 0x30c)"
	314	depends on RADIO_ZOLTRIX=y
	315	default "20c"
	316	help
	317	Enter the I/O port of your Zoltrix radio card.
	318
9c9dbedf HV	319	config I2C_SI4713
	320	tristate "I2C driver for Silicon Labs Si4713 device"
	321	depends on I2C && VIDEO_V4L2
	322	---help---
	323	Say Y here if you want support to Si4713 I2C device.
	324	This device driver supports only i2c bus.
	325
	326	To compile this driver as a module, choose M here: the
	327	module will be called si4713.
	328
	329	config RADIO_SI4713
	330	tristate "Silicon Labs Si4713 FM Radio Transmitter support"
	331	depends on I2C && VIDEO_V4L2
	332	select I2C_SI4713
	333	---help---
	334	Say Y here if you want support to Si4713 FM Radio Transmitter.
	335	This device can transmit audio through FM. It can transmit
7a254f46	336	RDS and RBDS signals as well. This module is the v4l2 radio
9c9dbedf HV	337	interface for the i2c driver of this device.
	338
	339	To compile this driver as a module, choose M here: the
	340	module will be called radio-si4713.
	341
7fb65297	342	config USB_DSBR
b31c33bd DSL	343	tristate "D-Link/GemTek USB FM radio support"
b31c33bd DSL	344	depends on USB && VIDEO_V4L2
7fb65297 MCC	345	---help---
	346	Say Y here if you want to connect this type of radio to your
	347	computer's USB port. Note that the audio is not digital, and
	348	you must connect the line out connector to a sound card or a
	349	set of speakers.
1da177e4	350
7fb65297 MCC	351	To compile this driver as a module, choose M here: the
7fb65297 MCC	352	module will be called dsbr100.
c5da5afb	353
b09cd163 JS	354	config RADIO_SI470X
	355	bool "Silicon Labs Si470x FM Radio Receiver support"
	356	depends on VIDEO_V4L2
78656acd	357
b09cd163	358	source "drivers/media/radio/si470x/Kconfig"
78656acd	359
2aa72f3b AK	360	config USB_MR800
	361	tristate "AverMedia MR 800 USB FM radio support"
	362	depends on USB && VIDEO_V4L2
	363	---help---
	364	Say Y here if you want to connect this type of radio to your
	365	computer's USB port. Note that the audio is not digital, and
	366	you must connect the line out connector to a sound card or a
	367	set of speakers.
	368
	369	To compile this driver as a module, choose M here: the
	370	module will be called radio-mr800.
	371
46a60cfe FB	372	config RADIO_TEA5764
	373	tristate "TEA5764 I2C FM radio support"
	374	depends on I2C && VIDEO_V4L2
	375	---help---
	376	Say Y here if you want to use the TEA5764 FM chip found in
	377	EZX phones. This FM chip is present in EZX phones from Motorola,
	378	connected to internal pxa I2C bus.
	379
	380	To compile this driver as a module, choose M here: the
	381	module will be called radio-tea5764.
	382
	383	config RADIO_TEA5764_XTAL
	384	bool "TEA5764 crystal reference"
	385	depends on RADIO_TEA5764=y
	386	default y
	387	help
	388	Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
	389	here if TEA5764 reference frequency is connected in FREQIN.
	390
ee4b9dbb RR	391	config RADIO_SAA7706H
	392	tristate "SAA7706H Car Radio DSP"
	393	depends on I2C && VIDEO_V4L2
	394	---help---
	395	Say Y here if you want to use the SAA7706H Car radio Digital
	396	Signal Processor, found for instance on the Russellville development
	397	board. On the russellville the device is connected to internal
	398	timberdale I2C bus.
	399
	400	To compile this driver as a module, choose M here: the
	401	module will be called SAA7706H.
	402
eea85b0a RR	403	config RADIO_TEF6862
	404	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
	405	depends on I2C && VIDEO_V4L2
	406	---help---
	407	Say Y here if you want to use the TEF6862 Car Radio Enhanced
	408	Selectivity Tuner, found for instance on the Russellville development
	409	board. On the russellville the device is connected to internal
	410	timberdale I2C bus.
	411
	412	To compile this driver as a module, choose M here: the
	413	module will be called TEF6862.
	414
d44d1f3b RR	415	config RADIO_TIMBERDALE
	416	tristate "Enable the Timberdale radio driver"
	417	depends on MFD_TIMBERDALE && VIDEO_V4L2
53600440	418	depends on I2C # for RADIO_SAA7706H
d44d1f3b RR	419	select RADIO_TEF6862
	420	select RADIO_SAA7706H
	421	---help---
	422	This is a kind of umbrella driver for the Radio Tuner and DSP
	423	found behind the Timberdale FPGA on the Russellville board.
	424	Enabling this driver will automatically select the DSP and tuner.
	425
87d1a50c MA	426	config RADIO_WL1273
	427	tristate "Texas Instruments WL1273 I2C FM Radio"
	428	depends on I2C && VIDEO_V4L2
1b149bbe	429	select MFD_CORE
87d1a50c MA	430	select MFD_WL1273_CORE
	431	select FW_LOADER
	432	---help---
	433	Choose Y here if you have this FM radio chip.
	434
	435	In order to control your radio card, you will need to use programs
	436	that are compatible with the Video For Linux 2 API. Information on
	437	this API and pointers to "v4l2" programs may be found at
	438	<file:Documentation/video4linux/API.html>.
	439
	440	To compile this driver as a module, choose M here: the
	441	module will be called radio-wl1273.
	442
57f05bfa MH	443	# TI's ST based wl128x FM radio
	444	source "drivers/media/radio/wl128x/Kconfig"
	445
c5da5afb	446	endif # RADIO_ADAPTERS