Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Multimedia Video device configuration | |
3 | # | |
4 | ||
c5da5afb JE |
5 | menuconfig RADIO_ADAPTERS |
6 | bool "Radio Adapters" | |
057596ee | 7 | depends on VIDEO_V4L2 |
c5da5afb | 8 | default y |
ff01652c MCC |
9 | ---help--- |
10 | Say Y here to enable selecting AM/FM radio adapters. | |
c5da5afb | 11 | |
057596ee | 12 | if RADIO_ADAPTERS && VIDEO_V4L2 |
1da177e4 LT |
13 | |
14 | config RADIO_CADET | |
15 | tristate "ADS Cadet AM/FM Tuner" | |
c0c7fa09 | 16 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
17 | ---help--- |
18 | Choose Y here if you have one of these AM/FM radio cards, and then | |
19 | fill in the port address below. | |
20 | ||
21 | In order to control your radio card, you will need to use programs | |
22 | that are compatible with the Video For Linux API. Information on | |
23 | this API and pointers to "v4l" programs may be found at | |
24 | <file:Documentation/video4linux/API.html>. | |
25 | ||
26 | Further documentation on this driver can be found on the WWW at | |
27 | <http://linux.blackhawke.net/cadet/>. | |
28 | ||
29 | To compile this driver as a module, choose M here: the | |
30 | module will be called radio-cadet. | |
31 | ||
32 | config RADIO_RTRACK | |
33 | tristate "AIMSlab RadioTrack (aka RadioReveal) support" | |
46ff2c72 | 34 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
35 | ---help--- |
36 | Choose Y here if you have one of these FM radio cards, and then fill | |
37 | in the port address below. | |
38 | ||
39 | Note that newer AIMSlab RadioTrack cards have a different chipset | |
40 | and are not supported by this driver. For these cards, use the | |
41 | RadioTrack II driver below. | |
42 | ||
43 | If you have a GemTeks combined (PnP) sound- and radio card you must | |
44 | use this driver as a module and setup the card with isapnptools. | |
45 | You must also pass the module a suitable io parameter, 0x248 has | |
46 | been reported to be used by these cards. | |
47 | ||
48 | In order to control your radio card, you will need to use programs | |
49 | that are compatible with the Video For Linux API. Information on | |
50 | this API and pointers to "v4l" programs may be found at | |
51 | <file:Documentation/video4linux/API.html>. More information is | |
52 | contained in the file | |
53 | <file:Documentation/video4linux/radiotrack.txt>. | |
54 | ||
55 | To compile this driver as a module, choose M here: the | |
56 | module will be called radio-aimslab. | |
57 | ||
58 | config RADIO_RTRACK_PORT | |
59 | hex "RadioTrack i/o port (0x20f or 0x30f)" | |
60 | depends on RADIO_RTRACK=y | |
61 | default "20f" | |
62 | help | |
63 | Enter either 0x30f or 0x20f here. The card default is 0x30f, if you | |
64 | haven't changed the jumper setting on the card. | |
65 | ||
66 | config RADIO_RTRACK2 | |
67 | tristate "AIMSlab RadioTrack II support" | |
f8c559f8 | 68 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
69 | ---help--- |
70 | Choose Y here if you have this FM radio card, and then fill in the | |
71 | port address below. | |
72 | ||
73 | In order to control your radio card, you will need to use programs | |
74 | that are compatible with the Video For Linux API. Information on | |
75 | this API and pointers to "v4l" programs may be found at | |
76 | <file:Documentation/video4linux/API.html>. | |
77 | ||
78 | To compile this driver as a module, choose M here: the | |
79 | module will be called radio-rtrack2. | |
80 | ||
81 | config RADIO_RTRACK2_PORT | |
82 | hex "RadioTrack II i/o port (0x20c or 0x30c)" | |
83 | depends on RADIO_RTRACK2=y | |
84 | default "30c" | |
85 | help | |
86 | Enter either 0x30c or 0x20c here. The card default is 0x30c, if you | |
87 | haven't changed the jumper setting on the card. | |
88 | ||
89 | config RADIO_AZTECH | |
90 | tristate "Aztech/Packard Bell Radio" | |
a4366af4 | 91 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
92 | ---help--- |
93 | Choose Y here if you have one of these FM radio cards, and then fill | |
94 | in the port address below. | |
95 | ||
96 | In order to control your radio card, you will need to use programs | |
97 | that are compatible with the Video For Linux API. Information on | |
98 | this API and pointers to "v4l" programs may be found at | |
99 | <file:Documentation/video4linux/API.html>. | |
100 | ||
101 | To compile this driver as a module, choose M here: the | |
102 | module will be called radio-aztech. | |
103 | ||
104 | config RADIO_AZTECH_PORT | |
105 | hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" | |
106 | depends on RADIO_AZTECH=y | |
107 | default "350" | |
108 | help | |
109 | Enter either 0x350 or 0x358 here. The card default is 0x350, if you | |
110 | haven't changed the setting of jumper JP3 on the card. Removing the | |
111 | jumper sets the card to 0x358. | |
112 | ||
113 | config RADIO_GEMTEK | |
3e7589c5 | 114 | tristate "GemTek Radio card (or compatible) support" |
d1c4ecde | 115 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
116 | ---help--- |
117 | Choose Y here if you have this FM radio card, and then fill in the | |
3e7589c5 PS |
118 | I/O port address and settings below. The following cards either have |
119 | GemTek Radio tuner or are rebranded GemTek Radio cards: | |
120 | ||
121 | - Sound Vision 16 Gold with FM Radio | |
122 | - Typhoon Radio card (some models) | |
123 | - Hama Radio card | |
1da177e4 LT |
124 | |
125 | In order to control your radio card, you will need to use programs | |
126 | that are compatible with the Video For Linux API. Information on | |
127 | this API and pointers to "v4l" programs may be found at | |
128 | <file:Documentation/video4linux/API.html>. | |
129 | ||
130 | To compile this driver as a module, choose M here: the | |
131 | module will be called radio-gemtek. | |
132 | ||
133 | config RADIO_GEMTEK_PORT | |
3e7589c5 | 134 | hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)" |
1da177e4 LT |
135 | depends on RADIO_GEMTEK=y |
136 | default "34c" | |
137 | help | |
138 | Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is | |
139 | 0x34c, if you haven't changed the jumper setting on the card. On | |
140 | Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O | |
3e7589c5 PS |
141 | port is 0x20c, 0x248 or 0x28c. |
142 | If automatic I/O port probing is enabled this port will be used only | |
143 | in case of automatic probing failure, ie. as a fallback. | |
144 | ||
145 | config RADIO_GEMTEK_PROBE | |
146 | bool "Automatic I/O port probing" | |
147 | depends on RADIO_GEMTEK=y | |
148 | default y | |
149 | help | |
150 | Say Y here to enable automatic probing for GemTek Radio card. The | |
151 | following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and | |
152 | 0x28c. | |
1da177e4 LT |
153 | |
154 | config RADIO_GEMTEK_PCI | |
155 | tristate "GemTek PCI Radio Card support" | |
52afbc2f | 156 | depends on VIDEO_V4L2 && PCI |
1da177e4 LT |
157 | ---help--- |
158 | Choose Y here if you have this PCI FM radio card. | |
159 | ||
160 | In order to control your radio card, you will need to use programs | |
4286c6f6 | 161 | that are compatible with the Video for Linux API. Information on |
1da177e4 LT |
162 | this API and pointers to "v4l" programs may be found at |
163 | <file:Documentation/video4linux/API.html>. | |
164 | ||
165 | To compile this driver as a module, choose M here: the | |
166 | module will be called radio-gemtek-pci. | |
167 | ||
168 | config RADIO_MAXIRADIO | |
169 | tristate "Guillemot MAXI Radio FM 2000 radio" | |
e84fef6b | 170 | depends on VIDEO_V4L2 && PCI |
1da177e4 LT |
171 | ---help--- |
172 | Choose Y here if you have this radio card. This card may also be | |
173 | found as Gemtek PCI FM. | |
174 | ||
175 | In order to control your radio card, you will need to use programs | |
176 | that are compatible with the Video For Linux API. Information on | |
177 | this API and pointers to "v4l" programs may be found at | |
178 | <file:Documentation/video4linux/API.html>. | |
179 | ||
180 | To compile this driver as a module, choose M here: the | |
181 | module will be called radio-maxiradio. | |
182 | ||
183 | config RADIO_MAESTRO | |
184 | tristate "Maestro on board radio" | |
b6055d7b | 185 | depends on VIDEO_V4L2 && PCI |
1da177e4 LT |
186 | ---help--- |
187 | Say Y here to directly support the on-board radio tuner on the | |
188 | Maestro 2 or 2E sound card. | |
189 | ||
190 | In order to control your radio card, you will need to use programs | |
191 | that are compatible with the Video For Linux API. Information on | |
192 | this API and pointers to "v4l" programs may be found at | |
193 | <file:Documentation/video4linux/API.html>. | |
194 | ||
195 | To compile this driver as a module, choose M here: the | |
196 | module will be called radio-maestro. | |
8366fc39 KH |
197 | |
198 | config RADIO_MIROPCM20 | |
199 | tristate "miroSOUND PCM20 radio" | |
200 | depends on ISA && VIDEO_V4L2 | |
201 | select SND_MIRO | |
202 | ---help--- | |
203 | Choose Y here if you have this FM radio card. You also need to enable | |
204 | the ALSA sound system. This choice automatically selects the ALSA | |
205 | sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this | |
206 | is required for the radio-miropcm20. | |
207 | ||
208 | In order to control your radio card, you will need to use programs | |
209 | that are compatible with the Video For Linux API. Information on | |
210 | this API and pointers to "v4l" programs may be found at | |
211 | <file:Documentation/video4linux/API.html>. | |
212 | ||
213 | To compile this driver as a module, choose M here: the | |
214 | module will be called radio-miropcm20. | |
1da177e4 | 215 | |
1da177e4 LT |
216 | config RADIO_SF16FMI |
217 | tristate "SF16FMI Radio" | |
a2ef73af | 218 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
219 | ---help--- |
220 | Choose Y here if you have one of these FM radio cards. If you | |
221 | compile the driver into the kernel and your card is not PnP one, you | |
222 | have to add "sf16fm=<io>" to the kernel command line (I/O address is | |
223 | 0x284 or 0x384). | |
224 | ||
225 | In order to control your radio card, you will need to use programs | |
226 | that are compatible with the Video For Linux API. Information on | |
227 | this API and pointers to "v4l" programs may be found at | |
228 | <file:Documentation/video4linux/API.html>. | |
229 | ||
230 | To compile this driver as a module, choose M here: the | |
231 | module will be called radio-sf16fmi. | |
232 | ||
233 | config RADIO_SF16FMR2 | |
234 | tristate "SF16FMR2 Radio" | |
acda0e71 | 235 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
236 | ---help--- |
237 | Choose Y here if you have one of these FM radio cards. | |
238 | ||
239 | In order to control your radio card, you will need to use programs | |
240 | that are compatible with the Video For Linux API. Information on | |
241 | this API and pointers to "v4l" programs may be found on the WWW at | |
242 | <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. | |
243 | ||
244 | To compile this driver as a module, choose M here: the | |
245 | module will be called radio-sf16fmr2. | |
246 | ||
247 | config RADIO_TERRATEC | |
248 | tristate "TerraTec ActiveRadio ISA Standalone" | |
55ac7b69 | 249 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
250 | ---help--- |
251 | Choose Y here if you have this FM radio card, and then fill in the | |
252 | port address below. (TODO) | |
253 | ||
254 | Note: This driver is in its early stages. Right now volume and | |
255 | frequency control and muting works at least for me, but | |
256 | unfortunately I have not found anybody who wants to use this card | |
257 | with Linux. So if it is this what YOU are trying to do right now, | |
258 | PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>. | |
259 | ||
260 | In order to control your radio card, you will need to use programs | |
261 | that are compatible with the Video For Linux API. Information on | |
262 | this API and pointers to "v4l" programs may be found at | |
263 | <file:Documentation/video4linux/API.html>. | |
264 | ||
265 | To compile this driver as a module, choose M here: the | |
266 | module will be called radio-terratec. | |
267 | ||
268 | config RADIO_TERRATEC_PORT | |
269 | hex "Terratec i/o port (normally 0x590)" | |
270 | depends on RADIO_TERRATEC=y | |
271 | default "590" | |
272 | help | |
273 | Fill in the I/O port of your TerraTec FM radio card. If unsure, go | |
274 | with the default. | |
275 | ||
276 | config RADIO_TRUST | |
277 | tristate "Trust FM radio card" | |
982eddb9 | 278 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
279 | help |
280 | This is a driver for the Trust FM radio cards. Say Y if you have | |
281 | such a card and want to use it under Linux. | |
282 | ||
283 | To compile this driver as a module, choose M here: the | |
284 | module will be called radio-trust. | |
285 | ||
286 | config RADIO_TRUST_PORT | |
287 | hex "Trust i/o port (usually 0x350 or 0x358)" | |
288 | depends on RADIO_TRUST=y | |
289 | default "350" | |
290 | help | |
291 | Enter the I/O port of your Trust FM radio card. If unsure, try the | |
292 | values "0x350" or "0x358". | |
293 | ||
294 | config RADIO_TYPHOON | |
295 | tristate "Typhoon Radio (a.k.a. EcoRadio)" | |
30c48305 | 296 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
297 | ---help--- |
298 | Choose Y here if you have one of these FM radio cards, and then fill | |
299 | in the port address and the frequency used for muting below. | |
300 | ||
301 | In order to control your radio card, you will need to use programs | |
302 | that are compatible with the Video For Linux API. Information on | |
303 | this API and pointers to "v4l" programs may be found at | |
304 | <file:Documentation/video4linux/API.html>. | |
305 | ||
306 | To compile this driver as a module, choose M here: the | |
307 | module will be called radio-typhoon. | |
308 | ||
1da177e4 LT |
309 | config RADIO_TYPHOON_PORT |
310 | hex "Typhoon I/O port (0x316 or 0x336)" | |
311 | depends on RADIO_TYPHOON=y | |
312 | default "316" | |
313 | help | |
314 | Enter the I/O port of your Typhoon or EcoRadio radio card. | |
315 | ||
316 | config RADIO_TYPHOON_MUTEFREQ | |
317 | int "Typhoon frequency set when muting the device (kHz)" | |
318 | depends on RADIO_TYPHOON=y | |
319 | default "87500" | |
320 | help | |
321 | Enter the frequency used for muting the radio. The device is never | |
322 | completely silent. If the volume is just turned down, you can still | |
323 | hear silent voices and music. For that reason, the frequency of the | |
324 | radio device is set to the frequency you can enter here whenever | |
325 | the device is muted. There should be no local radio station at that | |
326 | frequency. | |
327 | ||
328 | config RADIO_ZOLTRIX | |
329 | tristate "Zoltrix Radio" | |
2ab65299 | 330 | depends on ISA && VIDEO_V4L2 |
1da177e4 LT |
331 | ---help--- |
332 | Choose Y here if you have one of these FM radio cards, and then fill | |
333 | in the port address below. | |
334 | ||
335 | In order to control your radio card, you will need to use programs | |
336 | that are compatible with the Video For Linux API. Information on | |
337 | this API and pointers to "v4l" programs may be found at | |
338 | <file:Documentation/video4linux/API.html>. | |
339 | ||
340 | To compile this driver as a module, choose M here: the | |
341 | module will be called radio-zoltrix. | |
342 | ||
343 | config RADIO_ZOLTRIX_PORT | |
344 | hex "ZOLTRIX I/O port (0x20c or 0x30c)" | |
345 | depends on RADIO_ZOLTRIX=y | |
346 | default "20c" | |
347 | help | |
348 | Enter the I/O port of your Zoltrix radio card. | |
349 | ||
9c9dbedf HV |
350 | config I2C_SI4713 |
351 | tristate "I2C driver for Silicon Labs Si4713 device" | |
352 | depends on I2C && VIDEO_V4L2 | |
353 | ---help--- | |
354 | Say Y here if you want support to Si4713 I2C device. | |
355 | This device driver supports only i2c bus. | |
356 | ||
357 | To compile this driver as a module, choose M here: the | |
358 | module will be called si4713. | |
359 | ||
360 | config RADIO_SI4713 | |
361 | tristate "Silicon Labs Si4713 FM Radio Transmitter support" | |
362 | depends on I2C && VIDEO_V4L2 | |
363 | select I2C_SI4713 | |
364 | ---help--- | |
365 | Say Y here if you want support to Si4713 FM Radio Transmitter. | |
366 | This device can transmit audio through FM. It can transmit | |
7a254f46 | 367 | RDS and RBDS signals as well. This module is the v4l2 radio |
9c9dbedf HV |
368 | interface for the i2c driver of this device. |
369 | ||
370 | To compile this driver as a module, choose M here: the | |
371 | module will be called radio-si4713. | |
372 | ||
7fb65297 | 373 | config USB_DSBR |
b31c33bd DSL |
374 | tristate "D-Link/GemTek USB FM radio support" |
375 | depends on USB && VIDEO_V4L2 | |
7fb65297 MCC |
376 | ---help--- |
377 | Say Y here if you want to connect this type of radio to your | |
378 | computer's USB port. Note that the audio is not digital, and | |
379 | you must connect the line out connector to a sound card or a | |
380 | set of speakers. | |
1da177e4 | 381 | |
7fb65297 MCC |
382 | To compile this driver as a module, choose M here: the |
383 | module will be called dsbr100. | |
c5da5afb | 384 | |
b09cd163 JS |
385 | config RADIO_SI470X |
386 | bool "Silicon Labs Si470x FM Radio Receiver support" | |
387 | depends on VIDEO_V4L2 | |
78656acd | 388 | |
b09cd163 | 389 | source "drivers/media/radio/si470x/Kconfig" |
78656acd | 390 | |
2aa72f3b AK |
391 | config USB_MR800 |
392 | tristate "AverMedia MR 800 USB FM radio support" | |
393 | depends on USB && VIDEO_V4L2 | |
394 | ---help--- | |
395 | Say Y here if you want to connect this type of radio to your | |
396 | computer's USB port. Note that the audio is not digital, and | |
397 | you must connect the line out connector to a sound card or a | |
398 | set of speakers. | |
399 | ||
400 | To compile this driver as a module, choose M here: the | |
401 | module will be called radio-mr800. | |
402 | ||
46a60cfe FB |
403 | config RADIO_TEA5764 |
404 | tristate "TEA5764 I2C FM radio support" | |
405 | depends on I2C && VIDEO_V4L2 | |
406 | ---help--- | |
407 | Say Y here if you want to use the TEA5764 FM chip found in | |
408 | EZX phones. This FM chip is present in EZX phones from Motorola, | |
409 | connected to internal pxa I2C bus. | |
410 | ||
411 | To compile this driver as a module, choose M here: the | |
412 | module will be called radio-tea5764. | |
413 | ||
414 | config RADIO_TEA5764_XTAL | |
415 | bool "TEA5764 crystal reference" | |
416 | depends on RADIO_TEA5764=y | |
417 | default y | |
418 | help | |
419 | Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N | |
420 | here if TEA5764 reference frequency is connected in FREQIN. | |
421 | ||
c5da5afb | 422 | endif # RADIO_ADAPTERS |