Commit | Line | Data |
---|---|---|
2add87a9 JS |
1 | /* |
2 | * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III | |
3 | * | |
4 | * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC. | |
5 | * | |
6 | * see flexcop.c for copyright information. | |
7 | */ | |
8 | #include "flexcop.h" | |
9 | ||
10 | #include "stv0299.h" | |
11 | #include "mt352.h" | |
12 | #include "nxt2002.h" | |
55f51efd | 13 | #include "bcm3510.h" |
2add87a9 JS |
14 | #include "stv0297.h" |
15 | #include "mt312.h" | |
16 | ||
17 | /* lnb control */ | |
18 | ||
19 | static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) | |
20 | { | |
21 | struct flexcop_device *fc = fe->dvb->priv; | |
22 | flexcop_ibi_value v; | |
23 | deb_tuner("polarity/voltage = %u\n", voltage); | |
24 | ||
25 | v = fc->read_ibi_reg(fc, misc_204); | |
26 | switch (voltage) { | |
27 | case SEC_VOLTAGE_OFF: | |
28 | v.misc_204.ACPI1_sig = 1; | |
29 | break; | |
30 | case SEC_VOLTAGE_13: | |
31 | v.misc_204.ACPI1_sig = 0; | |
32 | v.misc_204.LNB_L_H_sig = 0; | |
33 | break; | |
34 | case SEC_VOLTAGE_18: | |
35 | v.misc_204.ACPI1_sig = 0; | |
36 | v.misc_204.LNB_L_H_sig = 1; | |
37 | break; | |
38 | default: | |
39 | err("unknown SEC_VOLTAGE value"); | |
40 | return -EINVAL; | |
41 | } | |
42 | return fc->write_ibi_reg(fc, misc_204, v); | |
43 | } | |
44 | ||
45 | static int flexcop_sleep(struct dvb_frontend* fe) | |
46 | { | |
47 | struct flexcop_device *fc = fe->dvb->priv; | |
48 | /* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */ | |
49 | ||
50 | if (fc->fe_sleep) | |
51 | return fc->fe_sleep(fe); | |
52 | ||
53 | /* v.misc_204.ACPI3_sig = 1; | |
54 | fc->write_ibi_reg(fc,misc_204,v);*/ | |
55 | ||
56 | return 0; | |
57 | } | |
58 | ||
59 | static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) | |
60 | { | |
61 | /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ | |
62 | struct flexcop_device *fc = fe->dvb->priv; | |
63 | flexcop_ibi_value v; | |
64 | u16 ax; | |
65 | v.raw = 0; | |
66 | ||
67 | deb_tuner("tone = %u\n",tone); | |
68 | ||
69 | switch (tone) { | |
70 | case SEC_TONE_ON: | |
71 | ax = 0x01ff; | |
72 | break; | |
73 | case SEC_TONE_OFF: | |
74 | ax = 0; | |
75 | break; | |
76 | default: | |
77 | err("unknown SEC_TONE value"); | |
78 | return -EINVAL; | |
79 | } | |
80 | ||
81 | v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ | |
82 | ||
958706c1 JS |
83 | v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax; |
84 | v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax; | |
2add87a9 JS |
85 | |
86 | return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); | |
87 | } | |
88 | ||
89 | static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) | |
90 | { | |
91 | flexcop_set_tone(fe, SEC_TONE_ON); | |
92 | udelay(data ? 500 : 1000); | |
93 | flexcop_set_tone(fe, SEC_TONE_OFF); | |
94 | udelay(data ? 1000 : 500); | |
95 | } | |
96 | ||
97 | static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) | |
98 | { | |
99 | int i, par = 1, d; | |
100 | ||
101 | for (i = 7; i >= 0; i--) { | |
102 | d = (data >> i) & 1; | |
103 | par ^= d; | |
104 | flexcop_diseqc_send_bit(fe, d); | |
105 | } | |
106 | ||
107 | flexcop_diseqc_send_bit(fe, par); | |
108 | } | |
109 | ||
110 | static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst) | |
111 | { | |
112 | int i; | |
113 | ||
114 | flexcop_set_tone(fe, SEC_TONE_OFF); | |
115 | mdelay(16); | |
116 | ||
117 | for (i = 0; i < len; i++) | |
118 | flexcop_diseqc_send_byte(fe,msg[i]); | |
119 | ||
120 | mdelay(16); | |
121 | ||
122 | if (burst != -1) { | |
123 | if (burst) | |
124 | flexcop_diseqc_send_byte(fe, 0xff); | |
125 | else { | |
126 | flexcop_set_tone(fe, SEC_TONE_ON); | |
127 | udelay(12500); | |
128 | flexcop_set_tone(fe, SEC_TONE_OFF); | |
129 | } | |
130 | msleep(20); | |
131 | } | |
132 | return 0; | |
133 | } | |
134 | ||
135 | static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) | |
136 | { | |
137 | return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); | |
138 | } | |
139 | ||
140 | static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) | |
141 | { | |
142 | return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); | |
143 | } | |
144 | ||
145 | /* dvb-s stv0299 */ | |
146 | static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) | |
147 | { | |
148 | u8 aclk = 0; | |
149 | u8 bclk = 0; | |
150 | ||
151 | if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } | |
152 | else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } | |
153 | else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } | |
154 | else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } | |
155 | else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } | |
156 | else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } | |
157 | ||
158 | stv0299_writereg (fe, 0x13, aclk); | |
159 | stv0299_writereg (fe, 0x14, bclk); | |
160 | stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); | |
161 | stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); | |
162 | stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); | |
163 | ||
164 | return 0; | |
165 | } | |
166 | ||
cfbfce15 | 167 | static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params) |
2add87a9 JS |
168 | { |
169 | u8 buf[4]; | |
170 | u32 div; | |
171 | struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; | |
2add87a9 JS |
172 | |
173 | div = params->frequency / 125; | |
174 | ||
175 | buf[0] = (div >> 8) & 0x7f; | |
176 | buf[1] = div & 0xff; | |
177 | buf[2] = 0x84; /* 0xC4 */ | |
178 | buf[3] = 0x08; | |
179 | ||
180 | if (params->frequency < 1500000) buf[3] |= 0x10; | |
181 | ||
cfbfce15 | 182 | if (i2c_transfer(i2c, &msg, 1) != 1) |
2add87a9 JS |
183 | return -EIO; |
184 | return 0; | |
185 | } | |
186 | ||
187 | static u8 samsung_tbmu24112_inittab[] = { | |
188 | 0x01, 0x15, | |
189 | 0x02, 0x30, | |
190 | 0x03, 0x00, | |
191 | 0x04, 0x7D, | |
192 | 0x05, 0x35, | |
193 | 0x06, 0x02, | |
194 | 0x07, 0x00, | |
195 | 0x08, 0xC3, | |
196 | 0x0C, 0x00, | |
197 | 0x0D, 0x81, | |
198 | 0x0E, 0x23, | |
199 | 0x0F, 0x12, | |
200 | 0x10, 0x7E, | |
201 | 0x11, 0x84, | |
202 | 0x12, 0xB9, | |
203 | 0x13, 0x88, | |
204 | 0x14, 0x89, | |
205 | 0x15, 0xC9, | |
206 | 0x16, 0x00, | |
207 | 0x17, 0x5C, | |
208 | 0x18, 0x00, | |
209 | 0x19, 0x00, | |
210 | 0x1A, 0x00, | |
211 | 0x1C, 0x00, | |
212 | 0x1D, 0x00, | |
213 | 0x1E, 0x00, | |
214 | 0x1F, 0x3A, | |
215 | 0x20, 0x2E, | |
216 | 0x21, 0x80, | |
217 | 0x22, 0xFF, | |
218 | 0x23, 0xC1, | |
219 | 0x28, 0x00, | |
220 | 0x29, 0x1E, | |
221 | 0x2A, 0x14, | |
222 | 0x2B, 0x0F, | |
223 | 0x2C, 0x09, | |
224 | 0x2D, 0x05, | |
225 | 0x31, 0x1F, | |
226 | 0x32, 0x19, | |
227 | 0x33, 0xFE, | |
228 | 0x34, 0x93, | |
229 | 0xff, 0xff, | |
230 | }; | |
231 | ||
232 | static struct stv0299_config samsung_tbmu24112_config = { | |
233 | .demod_address = 0x68, | |
234 | .inittab = samsung_tbmu24112_inittab, | |
235 | .mclk = 88000000UL, | |
236 | .invert = 0, | |
237 | .enhanced_tuning = 0, | |
238 | .skip_reinit = 0, | |
239 | .lock_output = STV0229_LOCKOUTPUT_LK, | |
240 | .volt13_op0_op1 = STV0299_VOLT13_OP1, | |
241 | .min_delay_ms = 100, | |
242 | .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, | |
243 | .pll_set = samsung_tbmu24112_pll_set, | |
244 | }; | |
245 | ||
246 | /* dvb-t mt352 */ | |
247 | static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) | |
248 | { | |
249 | static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d }; | |
250 | static u8 mt352_reset [] = { 0x50, 0x80 }; | |
251 | static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; | |
252 | static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; | |
253 | static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; | |
254 | ||
255 | mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); | |
256 | udelay(2000); | |
257 | mt352_write(fe, mt352_reset, sizeof(mt352_reset)); | |
258 | mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); | |
259 | ||
260 | mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); | |
261 | mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); | |
262 | ||
263 | return 0; | |
264 | } | |
265 | ||
266 | static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf) | |
267 | { | |
268 | u32 div; | |
269 | unsigned char bs = 0; | |
270 | ||
271 | #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ | |
272 | div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; | |
273 | ||
274 | if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; | |
275 | if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; | |
276 | if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; | |
277 | ||
278 | pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */ | |
279 | pllbuf[1] = div >> 8; | |
280 | pllbuf[2] = div & 0xff; | |
281 | pllbuf[3] = 0xcc; | |
282 | pllbuf[4] = bs; | |
283 | ||
284 | return 0; | |
285 | } | |
286 | ||
287 | static struct mt352_config samsung_tdtc9251dh0_config = { | |
2add87a9 | 288 | .demod_address = 0x0f, |
55f51efd JS |
289 | .demod_init = samsung_tdtc9251dh0_demod_init, |
290 | .pll_set = samsung_tdtc9251dh0_pll_set, | |
2add87a9 JS |
291 | }; |
292 | ||
55f51efd | 293 | static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) |
2add87a9 JS |
294 | { |
295 | struct flexcop_device *fc = fe->dvb->priv; | |
296 | return request_firmware(fw, name, fc->dev); | |
297 | } | |
298 | ||
299 | static struct nxt2002_config samsung_tbmv_config = { | |
55f51efd JS |
300 | .demod_address = 0x0a, |
301 | .request_firmware = flexcop_fe_request_firmware, | |
302 | }; | |
303 | ||
304 | static struct bcm3510_config air2pc_atsc_first_gen_config = { | |
305 | .demod_address = 0x0f, | |
306 | .request_firmware = flexcop_fe_request_firmware, | |
2add87a9 JS |
307 | }; |
308 | ||
309 | static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) | |
310 | { | |
311 | u8 buf[4]; | |
312 | u32 div; | |
313 | struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; | |
314 | struct flexcop_device *fc = fe->dvb->priv; | |
315 | ||
316 | div = (params->frequency + (125/2)) / 125; | |
317 | ||
318 | buf[0] = (div >> 8) & 0x7f; | |
319 | buf[1] = (div >> 0) & 0xff; | |
320 | buf[2] = 0x84 | ((div >> 10) & 0x60); | |
321 | buf[3] = 0x80; | |
322 | ||
323 | if (params->frequency < 1550000) | |
324 | buf[3] |= 0x02; | |
325 | ||
326 | if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) | |
327 | return -EIO; | |
328 | return 0; | |
329 | } | |
330 | ||
331 | static struct mt312_config skystar23_samsung_tbdu18132_config = { | |
332 | ||
333 | .demod_address = 0x0e, | |
334 | .pll_set = skystar23_samsung_tbdu18132_pll_set, | |
335 | }; | |
336 | ||
337 | static struct stv0297_config alps_tdee4_stv0297_config = { | |
338 | .demod_address = 0x1c, | |
339 | // .invert = 1, | |
340 | // .pll_set = alps_tdee4_stv0297_pll_set, | |
341 | }; | |
342 | ||
343 | /* try to figure out the frontend, each card/box can have on of the following list */ | |
344 | int flexcop_frontend_init(struct flexcop_device *fc) | |
345 | { | |
346 | /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */ | |
347 | if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) { | |
348 | fc->fe->ops->set_voltage = flexcop_set_voltage; | |
349 | ||
350 | fc->fe_sleep = fc->fe->ops->sleep; | |
351 | fc->fe->ops->sleep = flexcop_sleep; | |
352 | ||
353 | fc->dev_type = FC_SKY; | |
354 | info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address); | |
355 | } else | |
356 | /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ | |
357 | if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) { | |
358 | fc->dev_type = FC_AIR_DVB; | |
359 | info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address); | |
360 | } else | |
55f51efd | 361 | /* try the air atsc 2nd generation (nxt2002) */ |
2add87a9 | 362 | if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) { |
55f51efd | 363 | fc->dev_type = FC_AIR_ATSC2; |
2add87a9 JS |
364 | info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); |
365 | } else | |
55f51efd JS |
366 | /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */ |
367 | if ((fc->fe = bcm3510_attach(&air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) { | |
368 | fc->dev_type = FC_AIR_ATSC1; | |
369 | info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address); | |
370 | } else | |
2add87a9 JS |
371 | /* try the cable dvb (stv0297) */ |
372 | if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) { | |
373 | fc->dev_type = FC_CABLE; | |
374 | info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address); | |
375 | } else | |
376 | /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ | |
377 | if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) { | |
378 | fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; | |
379 | fc->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst; | |
380 | fc->fe->ops->set_tone = flexcop_set_tone; | |
381 | fc->fe->ops->set_voltage = flexcop_set_voltage; | |
382 | ||
383 | fc->fe_sleep = fc->fe->ops->sleep; | |
384 | fc->fe->ops->sleep = flexcop_sleep; | |
385 | ||
386 | fc->dev_type = FC_SKY_OLD; | |
387 | info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address); | |
388 | } | |
389 | ||
390 | if (fc->fe == NULL) { | |
391 | err("no frontend driver found for this B2C2/FlexCop adapter"); | |
392 | return -ENODEV; | |
393 | } else { | |
394 | if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { | |
395 | err("frontend registration failed!"); | |
396 | if (fc->fe->ops->release != NULL) | |
397 | fc->fe->ops->release(fc->fe); | |
398 | fc->fe = NULL; | |
399 | return -EINVAL; | |
400 | } | |
401 | } | |
402 | fc->init_state |= FC_STATE_FE_INIT; | |
403 | return 0; | |
404 | } | |
405 | ||
406 | void flexcop_frontend_exit(struct flexcop_device *fc) | |
407 | { | |
408 | if (fc->init_state & FC_STATE_FE_INIT) | |
409 | dvb_unregister_frontend(fc->fe); | |
410 | ||
411 | fc->init_state &= ~FC_STATE_FE_INIT; | |
412 | } |