[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / leds / Kconfig

config LEDS_GPIO_REGISTER
	bool
	help
	  This option provides the function gpio_led_register_device.
	  As this function is used by arch code it must not be compiled as a
	  module.

menuconfig NEW_LEDS
	bool "LED Support"
	help
	  Say Y to enable Linux LED support.  This allows control of supported
	  LEDs from both userspace and optionally, by kernel events (triggers).

	  This is not related to standard keyboard LEDs which are controlled
	  via the input system.

if NEW_LEDS

config LEDS_CLASS
	tristate "LED Class Support"
	help
	  This option enables the led sysfs class in /sys/class/leds.  You'll
	  need this to do anything useful with LEDs.  If unsure, say N.

comment "LED drivers"

config LEDS_88PM860X
	tristate "LED Support for Marvell 88PM860x PMIC"
	depends on LEDS_CLASS
	depends on MFD_88PM860X
	help
	  This option enables support for on-chip LED drivers found on Marvell
	  Semiconductor 88PM8606 PMIC.

config LEDS_ATMEL_PWM
	tristate "LED Support using Atmel PWM outputs"
	depends on LEDS_CLASS
	depends on ATMEL_PWM
	help
	  This option enables support for LEDs driven using outputs
	  of the dedicated PWM controller found on newer Atmel SOCs.

config LEDS_LM3530
	tristate "LCD Backlight driver for LM3530"
	depends on LEDS_CLASS
	depends on I2C
	help
	  This option enables support for the LCD backlight using
	  LM3530 ambient light sensor chip. This ALS chip can be
	  controlled manually or using PWM input or using ambient
	  light automatically.

config LEDS_LM3533
	tristate "LED support for LM3533"
	depends on LEDS_CLASS
	depends on MFD_LM3533
	help
	  This option enables support for the LEDs on National Semiconductor /
	  TI LM3533 Lighting Power chips.

	  The LEDs can be controlled directly, through PWM input, or by the
	  ambient-light-sensor interface. The chip supports
	  hardware-accelerated blinking with maximum on and off periods of 9.8
	  and 77 seconds respectively.

config LEDS_LM3642
	tristate "LED support for LM3642 Chip"
	depends on LEDS_CLASS && I2C
	select REGMAP_I2C
	help
	  This option enables support for LEDs connected to LM3642.
	  The LM3642 is a 4MHz fixed-frequency synchronous boost
	  converter plus 1.5A constant current driver for a high-current
	  white LED.


config LEDS_LOCOMO
	tristate "LED Support for Locomo device"
	depends on LEDS_CLASS
	depends on SHARP_LOCOMO
	help
	  This option enables support for the LEDs on Sharp Locomo.
	  Zaurus models SL-5500 and SL-5600.

config LEDS_MIKROTIK_RB532
	tristate "LED Support for Mikrotik Routerboard 532"
	depends on LEDS_CLASS
	depends on MIKROTIK_RB532
	help
	  This option enables support for the so called "User LED" of
	  Mikrotik's Routerboard 532.

config LEDS_S3C24XX
	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
	depends on LEDS_CLASS
	depends on ARCH_S3C24XX
	help
	  This option enables support for LEDs connected to GPIO lines
	  on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.

config LEDS_NET48XX
	tristate "LED Support for Soekris net48xx series Error LED"
	depends on LEDS_CLASS
	depends on SCx200_GPIO
	help
	  This option enables support for the Soekris net4801 and net4826 error
	  LED.

config LEDS_FSG
	tristate "LED Support for the Freecom FSG-3"
	depends on LEDS_CLASS
	depends on MACH_FSG
	help
	  This option enables support for the LEDs on the Freecom FSG-3.

config LEDS_WRAP
	tristate "LED Support for the WRAP series LEDs"
	depends on LEDS_CLASS
	depends on SCx200_GPIO
	help
	  This option enables support for the PCEngines WRAP programmable LEDs.

config LEDS_COBALT_QUBE
	tristate "LED Support for the Cobalt Qube series front LED"
	depends on LEDS_CLASS
	depends on MIPS_COBALT
	help
	  This option enables support for the front LED on Cobalt Qube series

config LEDS_COBALT_RAQ
	bool "LED Support for the Cobalt Raq series"
	depends on LEDS_CLASS=y && MIPS_COBALT
	select LEDS_TRIGGERS
	help
	  This option enables support for the Cobalt Raq series LEDs.

config LEDS_SUNFIRE
	tristate "LED support for SunFire servers."
	depends on LEDS_CLASS
	depends on SPARC64
	select LEDS_TRIGGERS
	help
	  This option enables support for the Left, Middle, and Right
	  LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.

config LEDS_HP6XX
	tristate "LED Support for the HP Jornada 6xx"
	depends on LEDS_CLASS
	depends on SH_HP6XX
	help
	  This option enables LED support for the handheld
	  HP Jornada 620/660/680/690.

config LEDS_PCA9532
	tristate "LED driver for PCA9532 dimmer"
	depends on LEDS_CLASS
	depends on I2C && INPUT
	help
	  This option enables support for NXP pca9532
	  LED controller. It is generally only useful
	  as a platform driver

config LEDS_PCA9532_GPIO
	bool "Enable GPIO support for PCA9532"
	depends on LEDS_PCA9532
	depends on GPIOLIB
	help
	  Allow unused pins on PCA9532 to be used as gpio.

	  To use a pin as gpio pca9532_type in pca9532_platform data needs to
	  set to PCA9532_TYPE_GPIO.

config LEDS_GPIO
	tristate "LED Support for GPIO connected LEDs"
	depends on LEDS_CLASS
	depends on GPIOLIB
	help
	  This option enables support for the LEDs connected to GPIO
	  outputs. To be useful the particular board must have LEDs
	  and they must be connected to the GPIO lines.  The LEDs must be
	  defined as platform devices and/or OpenFirmware platform devices.
	  The code to use these bindings can be selected below.

config LEDS_LP3944
	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
	depends on LEDS_CLASS
	depends on I2C
	help
	  This option enables support for LEDs connected to the National
	  Semiconductor LP3944 Lighting Management Unit (LMU) also known as
	  Fun Light Chip.

	  To compile this driver as a module, choose M here: the
	  module will be called leds-lp3944.

config LEDS_LP55XX_COMMON
	tristate "Common Driver for TI/National LP5521, LP5523/55231 and LP5562"
	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562
	select FW_LOADER
	help
	  This option supports common operations for LP5521 and LP5523/55231
	  devices.

config LEDS_LP5521
	tristate "LED Support for N.S. LP5521 LED driver chip"
	depends on LEDS_CLASS && I2C
	select LEDS_LP55XX_COMMON
	help
	  If you say yes here you get support for the National Semiconductor
	  LP5521 LED driver. It is 3 channel chip with programmable engines.
	  Driver provides direct control via LED class and interface for
	  programming the engines.

config LEDS_LP5523
	tristate "LED Support for TI/National LP5523/55231 LED driver chip"
	depends on LEDS_CLASS && I2C
	select LEDS_LP55XX_COMMON
	help
	  If you say yes here you get support for TI/National Semiconductor
	  LP5523/55231 LED driver.
	  It is 9 channel chip with programmable engines.
	  Driver provides direct control via LED class and interface for
	  programming the engines.

config LEDS_LP5562
	tristate "LED Support for TI LP5562 LED driver chip"
	depends on LEDS_CLASS && I2C
	select LEDS_LP55XX_COMMON
	help
	  If you say yes here you get support for TI LP5562 LED driver.
	  It is 4 channels chip with programmable engines.
	  Driver provides direct control via LED class and interface for
	  programming the engines.

config LEDS_LP8788
	tristate "LED support for the TI LP8788 PMIC"
	depends on LEDS_CLASS
	depends on MFD_LP8788
	help
	  This option enables support for the Keyboard LEDs on the LP8788 PMIC.

config LEDS_CLEVO_MAIL
	tristate "Mail LED on Clevo notebook"
	depends on LEDS_CLASS
	depends on X86 && SERIO_I8042 && DMI
	help
	  This driver makes the mail LED accessible from userspace
	  programs through the leds subsystem. This LED have three
	  known mode: off, blink at 0.5Hz and blink at 1Hz.

	  The driver supports two kinds of interface: using ledtrig-timer
	  or through /sys/class/leds/clevo::mail/brightness. As this LED
	  cannot change it's brightness it blinks instead. The brightness
	  value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
	  blink at 1Hz.

	  This module can drive the mail LED for the following notebooks:

	  	Clevo D400P
	  	Clevo D410J
	  	Clevo D410V
	  	Clevo D400V/D470V (not tested, but might work)
	  	Clevo M540N
	  	Clevo M5x0N (not tested, but might work)
	  	Positivo Mobile (Clevo M5x0V)

	  If your model is not listed here you can try the "nodetect"
	  module parameter.

	  To compile this driver as a module, choose M here: the
	  module will be called leds-clevo-mail.

config LEDS_PCA955X
	tristate "LED Support for PCA955x I2C chips"
	depends on LEDS_CLASS
	depends on I2C
	help
	  This option enables support for LEDs connected to PCA955x
	  LED driver chips accessed via the I2C bus.  Supported
	  devices include PCA9550, PCA9551, PCA9552, and PCA9553.

config LEDS_PCA9633
	tristate "LED support for PCA9633 I2C chip"
	depends on LEDS_CLASS
	depends on I2C
	help
	  This option enables support for LEDs connected to the PCA9633
	  LED driver chip accessed via the I2C bus.

config LEDS_WM831X_STATUS
	tristate "LED support for status LEDs on WM831x PMICs"
	depends on LEDS_CLASS
	depends on MFD_WM831X
	help
	  This option enables support for the status LEDs of the WM831x
          series of PMICs.

config LEDS_WM8350
	tristate "LED Support for WM8350 AudioPlus PMIC"
	depends on LEDS_CLASS
	depends on MFD_WM8350
	help
	  This option enables support for LEDs driven by the Wolfson
	  Microelectronics WM8350 AudioPlus PMIC.

config LEDS_DA903X
	tristate "LED Support for DA9030/DA9034 PMIC"
	depends on LEDS_CLASS
	depends on PMIC_DA903X
	help
	  This option enables support for on-chip LED drivers found
	  on Dialog Semiconductor DA9030/DA9034 PMICs.

config LEDS_DA9052
	tristate "Dialog DA9052/DA9053 LEDS"
	depends on LEDS_CLASS
	depends on PMIC_DA9052
	help
	  This option enables support for on-chip LED drivers found
	  on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.

config LEDS_DAC124S085
	tristate "LED Support for DAC124S085 SPI DAC"
	depends on LEDS_CLASS
	depends on SPI
	help
	  This option enables support for DAC124S085 SPI DAC from NatSemi,
	  which can be used to control up to four LEDs.

config LEDS_PWM
	tristate "PWM driven LED Support"
	depends on LEDS_CLASS
	depends on PWM
	help
	  This option enables support for pwm driven LEDs

config LEDS_REGULATOR
	tristate "REGULATOR driven LED support"
	depends on LEDS_CLASS
	depends on REGULATOR
	help
	  This option enables support for regulator driven LEDs.

config LEDS_BD2802
	tristate "LED driver for BD2802 RGB LED"
	depends on LEDS_CLASS
	depends on I2C
	help
	  This option enables support for BD2802GU RGB LED driver chips
	  accessed via the I2C bus.

config LEDS_INTEL_SS4200
	tristate "LED driver for Intel NAS SS4200 series"
	depends on LEDS_CLASS
	depends on PCI && DMI
	help
	  This option enables support for the Intel SS4200 series of
	  Network Attached Storage servers.  You may control the hard
	  drive or power LEDs on the front panel.  Using this driver
	  can stop the front LED from blinking after startup.

config LEDS_LT3593
	tristate "LED driver for LT3593 controllers"
	depends on LEDS_CLASS
	depends on GPIOLIB
	help
	  This option enables support for LEDs driven by a Linear Technology
	  LT3593 controller. This controller uses a special one-wire pulse
	  coding protocol to set the brightness.

config LEDS_ADP5520
	tristate "LED Support for ADP5520/ADP5501 PMIC"
	depends on LEDS_CLASS
	depends on PMIC_ADP5520
	help
	  This option enables support for on-chip LED drivers found
	  on Analog Devices ADP5520/ADP5501 PMICs.

	  To compile this driver as a module, choose M here: the module will
	  be called leds-adp5520.

config LEDS_DELL_NETBOOKS
	tristate "External LED on Dell Business Netbooks"
	depends on LEDS_CLASS
	depends on X86 && ACPI_WMI
	help
	  This adds support for the Latitude 2100 and similar
	  notebooks that have an external LED.

config LEDS_MC13783
	tristate "LED Support for MC13783 PMIC"
	depends on LEDS_CLASS
	depends on MFD_MC13783
	help
	  This option enable support for on-chip LED drivers found
	  on Freescale Semiconductor MC13783 PMIC.

config LEDS_NS2
	tristate "LED support for Network Space v2 GPIO LEDs"
	depends on LEDS_CLASS
	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \
		   MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2 || \
		   MACH_NETSPACE_V2_DT || MACH_INETSPACE_V2_DT || \
		   MACH_NETSPACE_MAX_V2_DT || MACH_NETSPACE_MINI_V2_DT
	default y
	help
	  This option enable support for the dual-GPIO LED found on the
	  Network Space v2 board (and parents). This include Internet Space v2,
	  Network Space (Max) v2 and d2 Network v2 boards.

config LEDS_NETXBIG
	tristate "LED support for Big Network series LEDs"
	depends on MACH_NET2BIG_V2 || MACH_NET5BIG_V2
	depends on LEDS_CLASS
	default y
	help
	  This option enable support for LEDs found on the LaCie 2Big
	  and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
	  controlled through a GPIO extension bus.

config LEDS_ASIC3
	bool "LED support for the HTC ASIC3"
	depends on LEDS_CLASS=y
	depends on MFD_ASIC3
	default y
	help
	  This option enables support for the LEDs on the HTC ASIC3. The HTC
	  ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
	  cannot be used. This driver supports hardware blinking with an on+off
	  period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.

config LEDS_RENESAS_TPU
	bool "LED support for Renesas TPU"
	depends on LEDS_CLASS=y && HAVE_CLK && GPIOLIB
	help
	  This option enables build of the LED TPU platform driver,
	  suitable to drive any TPU channel on newer Renesas SoCs.
	  The driver controls the GPIO pin connected to the LED via
	  the GPIO framework and expects the LED to be connected to
	  a pin that can be driven in both GPIO mode and using TPU
	  pin function. The latter to support brightness control.
	  Brightness control is supported but hardware blinking is not.

config LEDS_TCA6507
	tristate "LED Support for TCA6507 I2C chip"
	depends on LEDS_CLASS && I2C
	help
	  This option enables support for LEDs connected to TC6507
	  LED driver chips accessed via the I2C bus.
	  Driver support brightness control and hardware-assisted blinking.

config LEDS_MAX8997
	tristate "LED support for MAX8997 PMIC"
	depends on LEDS_CLASS && MFD_MAX8997
	help
	  This option enables support for on-chip LED drivers on
	  MAXIM MAX8997 PMIC.

config LEDS_LM355x
	tristate "LED support for LM355x Chips, LM3554 and LM3556"
	depends on LEDS_CLASS && I2C
	select REGMAP_I2C
	help
	  This option enables support for LEDs connected to LM355x.
	  LM355x includes Torch, Flash and Indicator functions.

config LEDS_OT200
	tristate "LED support for the Bachmann OT200"
	depends on LEDS_CLASS && HAS_IOMEM
	help
	  This option enables support for the LEDs on the Bachmann OT200.
	  Say Y to enable LEDs on the Bachmann OT200.

config LEDS_BLINKM
	tristate "LED support for the BlinkM I2C RGB LED"
	depends on LEDS_CLASS
	depends on I2C
	help
	  This option enables support for the BlinkM RGB LED connected
	  through I2C. Say Y to enable support for the BlinkM LED.

comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"

endif # NEW_LEDS
Commit	Line	Data
be5ce2f1 UKK	1	config LEDS_GPIO_REGISTER
	2	bool
	3	help
	4	This option provides the function gpio_led_register_device.
	5	As this function is used by arch code it must not be compiled as a
	6	module.
	7
66242f7e	8	menuconfig NEW_LEDS
c72a1d60 RP	9	bool "LED Support"
c72a1d60 RP	10	help
a8d2e7d9 RP	11	Say Y to enable Linux LED support. This allows control of supported
	12	LEDs from both userspace and optionally, by kernel events (triggers).
	13
	14	This is not related to standard keyboard LEDs which are controlled
	15	via the input system.
c72a1d60	16
45d16f09 EM	17	if NEW_LEDS
45d16f09 EM	18
c72a1d60	19	config LEDS_CLASS
a403d930	20	tristate "LED Class Support"
c72a1d60 RP	21	help
	22	This option enables the led sysfs class in /sys/class/leds. You'll
	23	need this to do anything useful with LEDs. If unsure, say N.
	24
24f51e81	25	comment "LED drivers"
c3bc9956	26
0a2f915b HZ	27	config LEDS_88PM860X
0a2f915b HZ	28	tristate "LED Support for Marvell 88PM860x PMIC"
0bae35e1	29	depends on LEDS_CLASS
37814fdc	30	depends on MFD_88PM860X
0a2f915b HZ	31	help
	32	This option enables support for on-chip LED drivers found on Marvell
	33	Semiconductor 88PM8606 PMIC.
	34
de5c9ede DB	35	config LEDS_ATMEL_PWM
de5c9ede DB	36	tristate "LED Support using Atmel PWM outputs"
0bae35e1	37	depends on LEDS_CLASS
d09e1666	38	depends on ATMEL_PWM
de5c9ede DB	39	help
	40	This option enables support for LEDs driven using outputs
	41	of the dedicated PWM controller found on newer Atmel SOCs.
	42
b1e6b706 SKS	43	config LEDS_LM3530
	44	tristate "LCD Backlight driver for LM3530"
	45	depends on LEDS_CLASS
	46	depends on I2C
	47	help
	48	This option enables support for the LCD backlight using
	49	LM3530 ambient light sensor chip. This ALS chip can be
	50	controlled manually or using PWM input or using ambient
	51	light automatically.
	52
401dea7f JH	53	config LEDS_LM3533
	54	tristate "LED support for LM3533"
	55	depends on LEDS_CLASS
	56	depends on MFD_LM3533
	57	help
	58	This option enables support for the LEDs on National Semiconductor /
	59	TI LM3533 Lighting Power chips.
	60
	61	The LEDs can be controlled directly, through PWM input, or by the
	62	ambient-light-sensor interface. The chip supports
	63	hardware-accelerated blinking with maximum on and off periods of 9.8
	64	and 77 seconds respectively.
	65
8b7cfbec SJ	66	config LEDS_LM3642
	67	tristate "LED support for LM3642 Chip"
	68	depends on LEDS_CLASS && I2C
	69	select REGMAP_I2C
	70	help
	71	This option enables support for LEDs connected to LM3642.
	72	The LM3642 is a 4MHz fixed-frequency synchronous boost
	73	converter plus 1.5A constant current driver for a high-current
	74	white LED.
	75
	76
4d3cb354 RP	77	config LEDS_LOCOMO
4d3cb354 RP	78	tristate "LED Support for Locomo device"
0bae35e1	79	depends on LEDS_CLASS
d09e1666	80	depends on SHARP_LOCOMO
4d3cb354 RP	81	help
	82	This option enables support for the LEDs on Sharp Locomo.
	83	Zaurus models SL-5500 and SL-5600.
	84
ac67e23b PS	85	config LEDS_MIKROTIK_RB532
ac67e23b PS	86	tristate "LED Support for Mikrotik Routerboard 532"
0bae35e1	87	depends on LEDS_CLASS
d09e1666	88	depends on MIKROTIK_RB532
ac67e23b PS	89	help
	90	This option enables support for the so called "User LED" of
	91	Mikrotik's Routerboard 532.
	92
54bdc470 BD	93	config LEDS_S3C24XX
54bdc470 BD	94	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
0bae35e1	95	depends on LEDS_CLASS
b130d5c2	96	depends on ARCH_S3C24XX
54bdc470 BD	97	help
	98	This option enables support for LEDs connected to GPIO lines
	99	on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
	100
1a87d942 CB	101	config LEDS_NET48XX
1a87d942 CB	102	tristate "LED Support for Soekris net48xx series Error LED"
0bae35e1	103	depends on LEDS_CLASS
d09e1666	104	depends on SCx200_GPIO
1a87d942 CB	105	help
	106	This option enables support for the Soekris net4801 and net4826 error
	107	LED.
	108
3b2e46f8 RW	109	config LEDS_FSG
3b2e46f8 RW	110	tristate "LED Support for the Freecom FSG-3"
0bae35e1	111	depends on LEDS_CLASS
d09e1666	112	depends on MACH_FSG
3b2e46f8 RW	113	help
	114	This option enables support for the LEDs on the Freecom FSG-3.
	115
0d75565f KK	116	config LEDS_WRAP
0d75565f KK	117	tristate "LED Support for the WRAP series LEDs"
0bae35e1	118	depends on LEDS_CLASS
d09e1666	119	depends on SCx200_GPIO
0d75565f KK	120	help
	121	This option enables support for the PCEngines WRAP programmable LEDs.
	122
f3b6b6cd YY	123	config LEDS_COBALT_QUBE
f3b6b6cd YY	124	tristate "LED Support for the Cobalt Qube series front LED"
0bae35e1	125	depends on LEDS_CLASS
d09e1666	126	depends on MIPS_COBALT
2fea6f35	127	help
f3b6b6cd	128	This option enables support for the front LED on Cobalt Qube series
2fea6f35	129
97da7aaf YY	130	config LEDS_COBALT_RAQ
97da7aaf YY	131	bool "LED Support for the Cobalt Raq series"
ec149619	132	depends on LEDS_CLASS=y && MIPS_COBALT
97da7aaf YY	133	select LEDS_TRIGGERS
	134	help
	135	This option enables support for the Cobalt Raq series LEDs.
	136
5843492c DM	137	config LEDS_SUNFIRE
5843492c DM	138	tristate "LED support for SunFire servers."
0bae35e1	139	depends on LEDS_CLASS
d09e1666	140	depends on SPARC64
5843492c DM	141	select LEDS_TRIGGERS
	142	help
	143	This option enables support for the Left, Middle, and Right
	144	LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
	145
d39a7a63 KE	146	config LEDS_HP6XX
d39a7a63 KE	147	tristate "LED Support for the HP Jornada 6xx"
0bae35e1	148	depends on LEDS_CLASS
d09e1666	149	depends on SH_HP6XX
d39a7a63	150	help
692105b8	151	This option enables LED support for the handheld
d39a7a63 KE	152	HP Jornada 620/660/680/690.
d39a7a63 KE	153
e14fa824 RV	154	config LEDS_PCA9532
e14fa824 RV	155	tristate "LED driver for PCA9532 dimmer"
0bae35e1	156	depends on LEDS_CLASS
5e0b080d	157	depends on I2C && INPUT
e14fa824 RV	158	help
e14fa824 RV	159	This option enables support for NXP pca9532
692105b8	160	LED controller. It is generally only useful
e14fa824 RV	161	as a platform driver
e14fa824 RV	162
3c1ab50d JE	163	config LEDS_PCA9532_GPIO
	164	bool "Enable GPIO support for PCA9532"
	165	depends on LEDS_PCA9532
	166	depends on GPIOLIB
	167	help
	168	Allow unused pins on PCA9532 to be used as gpio.
	169
	170	To use a pin as gpio pca9532_type in pca9532_platform data needs to
	171	set to PCA9532_TYPE_GPIO.
	172
22e03f3b RA	173	config LEDS_GPIO
22e03f3b RA	174	tristate "LED Support for GPIO connected LEDs"
0bae35e1	175	depends on LEDS_CLASS
76ec9d18	176	depends on GPIOLIB
22e03f3b RA	177	help
	178	This option enables support for the LEDs connected to GPIO
	179	outputs. To be useful the particular board must have LEDs
a7d878af TP	180	and they must be connected to the GPIO lines. The LEDs must be
	181	defined as platform devices and/or OpenFirmware platform devices.
	182	The code to use these bindings can be selected below.
	183
5054d39e AO	184	config LEDS_LP3944
5054d39e AO	185	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
0bae35e1	186	depends on LEDS_CLASS
d09e1666	187	depends on I2C
5054d39e	188	help
7f1be819 AO	189	This option enables support for LEDs connected to the National
	190	Semiconductor LP3944 Lighting Management Unit (LMU) also known as
	191	Fun Light Chip.
5054d39e AO	192
	193	To compile this driver as a module, choose M here: the
	194	module will be called leds-lp3944.
	195
c93d08fa	196	config LEDS_LP55XX_COMMON
ff45262a KM	197	tristate "Common Driver for TI/National LP5521, LP5523/55231 and LP5562"
ff45262a KM	198	depends on LEDS_LP5521 \|\| LEDS_LP5523 \|\| LEDS_LP5562
10c06d17	199	select FW_LOADER
c93d08fa MWK	200	help
	201	This option supports common operations for LP5521 and LP5523/55231
	202	devices.
	203
f4920f67 SO	204	config LEDS_LP5521
	205	tristate "LED Support for N.S. LP5521 LED driver chip"
	206	depends on LEDS_CLASS && I2C
c93d08fa	207	select LEDS_LP55XX_COMMON
f4920f67 SO	208	help
	209	If you say yes here you get support for the National Semiconductor
	210	LP5521 LED driver. It is 3 channel chip with programmable engines.
	211	Driver provides direct control via LED class and interface for
	212	programming the engines.
	213
	214	config LEDS_LP5523
ca705321	215	tristate "LED Support for TI/National LP5523/55231 LED driver chip"
f4920f67	216	depends on LEDS_CLASS && I2C
c93d08fa	217	select LEDS_LP55XX_COMMON
f4920f67	218	help
ca705321 KM	219	If you say yes here you get support for TI/National Semiconductor
	220	LP5523/55231 LED driver.
	221	It is 9 channel chip with programmable engines.
f4920f67 SO	222	Driver provides direct control via LED class and interface for
	223	programming the engines.
	224
ff45262a KM	225	config LEDS_LP5562
	226	tristate "LED Support for TI LP5562 LED driver chip"
	227	depends on LEDS_CLASS && I2C
	228	select LEDS_LP55XX_COMMON
	229	help
	230	If you say yes here you get support for TI LP5562 LED driver.
	231	It is 4 channels chip with programmable engines.
	232	Driver provides direct control via LED class and interface for
	233	programming the engines.
	234
eb80411b KM	235	config LEDS_LP8788
	236	tristate "LED support for the TI LP8788 PMIC"
	237	depends on LEDS_CLASS
	238	depends on MFD_LP8788
	239	help
	240	This option enables support for the Keyboard LEDs on the LP8788 PMIC.
	241
cec035de	242	config LEDS_CLEVO_MAIL
95dc5768	243	tristate "Mail LED on Clevo notebook"
0bae35e1	244	depends on LEDS_CLASS
d09e1666	245	depends on X86 && SERIO_I8042 && DMI
cec035de MN	246	help
	247	This driver makes the mail LED accessible from userspace
	248	programs through the leds subsystem. This LED have three
	249	known mode: off, blink at 0.5Hz and blink at 1Hz.
	250
92e015cb MN	251	The driver supports two kinds of interface: using ledtrig-timer
	252	or through /sys/class/leds/clevo::mail/brightness. As this LED
	253	cannot change it's brightness it blinks instead. The brightness
	254	value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
	255	blink at 1Hz.
cec035de MN	256
	257	This module can drive the mail LED for the following notebooks:
	258
b3ba31f8	259	Clevo D400P
cec035de MN	260	Clevo D410J
	261	Clevo D410V
	262	Clevo D400V/D470V (not tested, but might work)
	263	Clevo M540N
	264	Clevo M5x0N (not tested, but might work)
	265	Positivo Mobile (Clevo M5x0V)
	266
b3ba31f8	267	If your model is not listed here you can try the "nodetect"
692105b8	268	module parameter.
b3ba31f8	269
cec035de MN	270	To compile this driver as a module, choose M here: the
	271	module will be called leds-clevo-mail.
	272
f46e9203 NC	273	config LEDS_PCA955X
f46e9203 NC	274	tristate "LED Support for PCA955x I2C chips"
0bae35e1	275	depends on LEDS_CLASS
d09e1666	276	depends on I2C
f46e9203 NC	277	help
	278	This option enables support for LEDs connected to PCA955x
	279	LED driver chips accessed via the I2C bus. Supported
	280	devices include PCA9550, PCA9551, PCA9552, and PCA9553.
	281
75cb2e1d PM	282	config LEDS_PCA9633
	283	tristate "LED support for PCA9633 I2C chip"
	284	depends on LEDS_CLASS
	285	depends on I2C
	286	help
	287	This option enables support for LEDs connected to the PCA9633
	288	LED driver chip accessed via the I2C bus.
	289
c746b551 MB	290	config LEDS_WM831X_STATUS
c746b551 MB	291	tristate "LED support for status LEDs on WM831x PMICs"
0bae35e1	292	depends on LEDS_CLASS
d09e1666	293	depends on MFD_WM831X
c746b551 MB	294	help
	295	This option enables support for the status LEDs of the WM831x
	296	series of PMICs.
	297
0081e802 MB	298	config LEDS_WM8350
0081e802 MB	299	tristate "LED Support for WM8350 AudioPlus PMIC"
0bae35e1	300	depends on LEDS_CLASS
d09e1666	301	depends on MFD_WM8350
0081e802 MB	302	help
	303	This option enables support for LEDs driven by the Wolfson
	304	Microelectronics WM8350 AudioPlus PMIC.
	305
9e84561c MR	306	config LEDS_DA903X
9e84561c MR	307	tristate "LED Support for DA9030/DA9034 PMIC"
0bae35e1	308	depends on LEDS_CLASS
d09e1666	309	depends on PMIC_DA903X
9e84561c MR	310	help
	311	This option enables support for on-chip LED drivers found
	312	on Dialog Semiconductor DA9030/DA9034 PMICs.
	313
5ba73631 DDC	314	config LEDS_DA9052
	315	tristate "Dialog DA9052/DA9053 LEDS"
	316	depends on LEDS_CLASS
	317	depends on PMIC_DA9052
	318	help
	319	This option enables support for on-chip LED drivers found
	320	on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.
	321
ac2dd0f1 GL	322	config LEDS_DAC124S085
ac2dd0f1 GL	323	tristate "LED Support for DAC124S085 SPI DAC"
0bae35e1	324	depends on LEDS_CLASS
d09e1666	325	depends on SPI
ac2dd0f1 GL	326	help
	327	This option enables support for DAC124S085 SPI DAC from NatSemi,
	328	which can be used to control up to four LEDs.
	329
41c42ff5 LF	330	config LEDS_PWM
41c42ff5 LF	331	tristate "PWM driven LED Support"
0bae35e1	332	depends on LEDS_CLASS
ad0ba85f	333	depends on PWM
41c42ff5 LF	334	help
	335	This option enables support for pwm driven LEDs
	336
d4cc6a2e AO	337	config LEDS_REGULATOR
d4cc6a2e AO	338	tristate "REGULATOR driven LED support"
0bae35e1	339	depends on LEDS_CLASS
d09e1666	340	depends on REGULATOR
d4cc6a2e AO	341	help
	342	This option enables support for regulator driven LEDs.
	343
0b56129b KK	344	config LEDS_BD2802
0b56129b KK	345	tristate "LED driver for BD2802 RGB LED"
0bae35e1	346	depends on LEDS_CLASS
d09e1666	347	depends on I2C
0b56129b KK	348	help
	349	This option enables support for BD2802GU RGB LED driver chips
	350	accessed via the I2C bus.
	351
a328e95b DH	352	config LEDS_INTEL_SS4200
a328e95b DH	353	tristate "LED driver for Intel NAS SS4200 series"
0bae35e1	354	depends on LEDS_CLASS
d09e1666	355	depends on PCI && DMI
a328e95b DH	356	help
	357	This option enables support for the Intel SS4200 series of
	358	Network Attached Storage servers. You may control the hard
	359	drive or power LEDs on the front panel. Using this driver
	360	can stop the front LED from blinking after startup.
	361
a8dd18fe DM	362	config LEDS_LT3593
a8dd18fe DM	363	tristate "LED driver for LT3593 controllers"
0bae35e1	364	depends on LEDS_CLASS
76ec9d18	365	depends on GPIOLIB
a8dd18fe DM	366	help
	367	This option enables support for LEDs driven by a Linear Technology
	368	LT3593 controller. This controller uses a special one-wire pulse
	369	coding protocol to set the brightness.
	370
ed4a10b4 MH	371	config LEDS_ADP5520
ed4a10b4 MH	372	tristate "LED Support for ADP5520/ADP5501 PMIC"
0bae35e1	373	depends on LEDS_CLASS
d09e1666	374	depends on PMIC_ADP5520
ed4a10b4 MH	375	help
	376	This option enables support for on-chip LED drivers found
	377	on Analog Devices ADP5520/ADP5501 PMICs.
	378
	379	To compile this driver as a module, choose M here: the module will
	380	be called leds-adp5520.
	381
72dcd8d0 BR	382	config LEDS_DELL_NETBOOKS
72dcd8d0 BR	383	tristate "External LED on Dell Business Netbooks"
0bae35e1	384	depends on LEDS_CLASS
72dcd8d0 BR	385	depends on X86 && ACPI_WMI
	386	help
	387	This adds support for the Latitude 2100 and similar
	388	notebooks that have an external LED.
	389
7fdcef8a PR	390	config LEDS_MC13783
7fdcef8a PR	391	tristate "LED Support for MC13783 PMIC"
0bae35e1	392	depends on LEDS_CLASS
7fdcef8a PR	393	depends on MFD_MC13783
	394	help
	395	This option enable support for on-chip LED drivers found
	396	on Freescale Semiconductor MC13783 PMIC.
	397
11efe71f SG	398	config LEDS_NS2
11efe71f SG	399	tristate "LED support for Network Space v2 GPIO LEDs"
0bae35e1	400	depends on LEDS_CLASS
b12e2c12	401	depends on MACH_NETSPACE_V2 \|\| MACH_INETSPACE_V2 \|\| \
ecee1e47 SG	402	MACH_NETSPACE_MAX_V2 \|\| MACH_D2NET_V2 \|\| \
ecee1e47 SG	403	MACH_NETSPACE_V2_DT \|\| MACH_INETSPACE_V2_DT \|\| \
7f9871d9	404	MACH_NETSPACE_MAX_V2_DT \|\| MACH_NETSPACE_MINI_V2_DT
11efe71f SG	405	default y
	406	help
	407	This option enable support for the dual-GPIO LED found on the
	408	Network Space v2 board (and parents). This include Internet Space v2,
	409	Network Space (Max) v2 and d2 Network v2 boards.
	410
24467832 SG	411	config LEDS_NETXBIG
	412	tristate "LED support for Big Network series LEDs"
	413	depends on MACH_NET2BIG_V2 \|\| MACH_NET5BIG_V2
2504f6da	414	depends on LEDS_CLASS
24467832 SG	415	default y
	416	help
	417	This option enable support for LEDs found on the LaCie 2Big
	418	and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
	419	controlled through a GPIO extension bus.
	420
7d9e7e9f PP	421	config LEDS_ASIC3
7d9e7e9f PP	422	bool "LED support for the HTC ASIC3"
9473c4c1	423	depends on LEDS_CLASS=y
7d9e7e9f PP	424	depends on MFD_ASIC3
	425	default y
	426	help
	427	This option enables support for the LEDs on the HTC ASIC3. The HTC
	428	ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
	429	cannot be used. This driver supports hardware blinking with an on+off
	430	period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
	431
f59b6f9f MD	432	config LEDS_RENESAS_TPU
f59b6f9f MD	433	bool "LED support for Renesas TPU"
76ec9d18	434	depends on LEDS_CLASS=y && HAVE_CLK && GPIOLIB
f59b6f9f MD	435	help
	436	This option enables build of the LED TPU platform driver,
	437	suitable to drive any TPU channel on newer Renesas SoCs.
	438	The driver controls the GPIO pin connected to the LED via
	439	the GPIO framework and expects the LED to be connected to
	440	a pin that can be driven in both GPIO mode and using TPU
	441	pin function. The latter to support brightness control.
	442	Brightness control is supported but hardware blinking is not.
	443
a6d511e5 N	444	config LEDS_TCA6507
	445	tristate "LED Support for TCA6507 I2C chip"
	446	depends on LEDS_CLASS && I2C
	447	help
	448	This option enables support for LEDs connected to TC6507
	449	LED driver chips accessed via the I2C bus.
	450	Driver support brightness control and hardware-assisted blinking.
	451
8584cb82 DK	452	config LEDS_MAX8997
	453	tristate "LED support for MAX8997 PMIC"
	454	depends on LEDS_CLASS && MFD_MAX8997
	455	help
	456	This option enables support for on-chip LED drivers on
	457	MAXIM MAX8997 PMIC.
	458
b98d13c7 SJ	459	config LEDS_LM355x
b98d13c7 SJ	460	tristate "LED support for LM355x Chips, LM3554 and LM3556"
32abb478 SJ	461	depends on LEDS_CLASS && I2C
	462	select REGMAP_I2C
	463	help
b98d13c7 SJ	464	This option enables support for LEDs connected to LM355x.
b98d13c7 SJ	465	LM355x includes Torch, Flash and Indicator functions.
32abb478	466
e9a4593c SAS	467	config LEDS_OT200
	468	tristate "LED support for the Bachmann OT200"
	469	depends on LEDS_CLASS && HAS_IOMEM
	470	help
	471	This option enables support for the LEDs on the Bachmann OT200.
	472	Say Y to enable LEDs on the Bachmann OT200.
	473
b54cf35a JSM	474	config LEDS_BLINKM
	475	tristate "LED support for the BlinkM I2C RGB LED"
	476	depends on LEDS_CLASS
	477	depends on I2C
	478	help
	479	This option enables support for the BlinkM RGB LED connected
	480	through I2C. Say Y to enable support for the BlinkM LED.
	481
d09e1666	482	comment "LED Triggers"
f07fb521	483	source "drivers/leds/trigger/Kconfig"
44e1e9f8	484
66242f7e	485	endif # NEW_LEDS