projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[PATCH] frv: fix uninitialised variable in atm nicstar driver
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / ide / pci / serverworks.c
CommitLineData
1da177e4
LT		 1/*
2 * linux/drivers/ide/pci/serverworks.c Version 0.8 25 Ebr 2003
3 *
4 * Copyright (C) 1998-2000 Michel Aubry
5 * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
6 * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
7 * Portions copyright (c) 2001 Sun Microsystems
8 *
9 *
10 * RCC/ServerWorks IDE driver for Linux
11 *
12 * OSB4: `Open South Bridge' IDE Interface (fn 1)
13 * supports UDMA mode 2 (33 MB/s)
14 *
15 * CSB5: `Champion South Bridge' IDE Interface (fn 1)
16 * all revisions support UDMA mode 4 (66 MB/s)
17 * revision A2.0 and up support UDMA mode 5 (100 MB/s)
18 *
19 * *** The CSB5 does not provide ANY register ***
20 * *** to detect 80-conductor cable presence. ***
21 *
22 * CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
23 *
84f57fbc
NS		 24 * HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE
25 * controller same as the CSB6. Single channel ATA100 only.
26 *
1da177e4
LT		 27 * Documentation:
28 * Available under NDA only. Errata info very hard to get.
29 *
30 */
31
32#include <linux/config.h>
33#include <linux/types.h>
34#include <linux/module.h>
35#include <linux/kernel.h>
36#include <linux/ioport.h>
37#include <linux/pci.h>
38#include <linux/hdreg.h>
39#include <linux/ide.h>
40#include <linux/init.h>
41#include <linux/delay.h>
42
43#include <asm/io.h>
44
45#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
46#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
47
48/* Seagate Barracuda ATA IV Family drives in UDMA mode 5
49 * can overrun their FIFOs when used with the CSB5 */
50static const char *svwks_bad_ata100[] = {
51 "ST320011A",
52 "ST340016A",
53 "ST360021A",
54 "ST380021A",
55 NULL
56};
57
58static u8 svwks_revision = 0;
59static struct pci_dev *isa_dev;
60
61static int check_in_drive_lists (ide_drive_t *drive, const char **list)
62{
63 while (*list)
64 if (!strcmp(*list++, drive->id->model))
65 return 1;
66 return 0;
67}
68
69static u8 svwks_ratemask (ide_drive_t *drive)
70{
71 struct pci_dev *dev = HWIF(drive)->pci_dev;
72 u8 mode;
73
74 if (!svwks_revision)
75 pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
76
84f57fbc
NS		 77 if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
78 return 2;
1da177e4
LT		 79 if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
80 u32 reg = 0;
81 if (isa_dev)
82 pci_read_config_dword(isa_dev, 0x64, &reg);
83
84 /*
85 * Don't enable UDMA on disk devices for the moment
86 */
87 if(drive->media == ide_disk)
88 return 0;
89 /* Check the OSB4 DMA33 enable bit */
90 return ((reg & 0x00004000) == 0x00004000) ? 1 : 0;
91 } else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) {
92 return 1;
93 } else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) {
94 u8 btr = 0;
95 pci_read_config_byte(dev, 0x5A, &btr);
96 mode = btr & 0x3;
97 if (!eighty_ninty_three(drive))
98 mode = min(mode, (u8)1);
99 /* If someone decides to do UDMA133 on CSB5 the same
100 issue will bite so be inclusive */
101 if (mode > 2 && check_in_drive_lists(drive, svwks_bad_ata100))
102 mode = 2;
103 }
104 if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
105 (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) &&
106 (!(PCI_FUNC(dev->devfn) & 1)))
107 mode = 2;
108 return mode;
109}
110
111static u8 svwks_csb_check (struct pci_dev *dev)
112{
113 switch (dev->device) {
114 case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
115 case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
116 case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
84f57fbc 117 case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
1da177e4
LT		 118 return 1;
119 default:
120 break;
121 }
122 return 0;
123}
124static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
125{
126 u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
127 u8 dma_modes[] = { 0x77, 0x21, 0x20 };
128 u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
129 u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
130 u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 };
131
132 ide_hwif_t *hwif = HWIF(drive);
133 struct pci_dev *dev = hwif->pci_dev;
134 u8 speed;
135 u8 pio = ide_get_best_pio_mode(drive, 255, 5, NULL);
136 u8 unit = (drive->select.b.unit & 0x01);
137 u8 csb5 = svwks_csb_check(dev);
138 u8 ultra_enable = 0, ultra_timing = 0;
139 u8 dma_timing = 0, pio_timing = 0;
140 u16 csb5_pio = 0;
141
142 if (xferspeed == 255) /* PIO auto-tuning */
143 speed = XFER_PIO_0 + pio;
144 else
145 speed = ide_rate_filter(svwks_ratemask(drive), xferspeed);
146
147 /* If we are about to put a disk into UDMA mode we screwed up.
148 Our code assumes we never _ever_ do this on an OSB4 */
149
150 if(dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4 &&
151 drive->media == ide_disk && speed >= XFER_UDMA_0)
152 BUG();
153
154 pci_read_config_byte(dev, drive_pci[drive->dn], &pio_timing);
155 pci_read_config_byte(dev, drive_pci2[drive->dn], &dma_timing);
156 pci_read_config_byte(dev, (0x56|hwif->channel), &ultra_timing);
157 pci_read_config_word(dev, 0x4A, &csb5_pio);
158 pci_read_config_byte(dev, 0x54, &ultra_enable);
159
160 /* Per Specified Design by OEM, and ASIC Architect */
161 if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
162 (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
163 if (!drive->init_speed) {
164 u8 dma_stat = hwif->INB(hwif->dma_status);
165
166dma_pio:
167 if (((ultra_enable << (7-drive->dn) & 0x80) == 0x80) &&
168 ((dma_stat & (1<<(5+unit))) == (1<<(5+unit)))) {
169 drive->current_speed = drive->init_speed = XFER_UDMA_0 + udma_modes[(ultra_timing >> (4*unit)) & ~(0xF0)];
170 return 0;
171 } else if ((dma_timing) &&
172 ((dma_stat&(1<<(5+unit)))==(1<<(5+unit)))) {
173 u8 dmaspeed = dma_timing;
174
175 dma_timing &= ~0xFF;
176 if ((dmaspeed & 0x20) == 0x20)
177 dmaspeed = XFER_MW_DMA_2;
178 else if ((dmaspeed & 0x21) == 0x21)
179 dmaspeed = XFER_MW_DMA_1;
180 else if ((dmaspeed & 0x77) == 0x77)
181 dmaspeed = XFER_MW_DMA_0;
182 else
183 goto dma_pio;
184 drive->current_speed = drive->init_speed = dmaspeed;
185 return 0;
186 } else if (pio_timing) {
187 u8 piospeed = pio_timing;
188
189 pio_timing &= ~0xFF;
190 if ((piospeed & 0x20) == 0x20)
191 piospeed = XFER_PIO_4;
192 else if ((piospeed & 0x22) == 0x22)
193 piospeed = XFER_PIO_3;
194 else if ((piospeed & 0x34) == 0x34)
195 piospeed = XFER_PIO_2;
196 else if ((piospeed & 0x47) == 0x47)
197 piospeed = XFER_PIO_1;
198 else if ((piospeed & 0x5d) == 0x5d)
199 piospeed = XFER_PIO_0;
200 else
201 goto oem_setup_failed;
202 drive->current_speed = drive->init_speed = piospeed;
203 return 0;
204 }
205 }
206 }
207
208oem_setup_failed:
209
210 pio_timing &= ~0xFF;
211 dma_timing &= ~0xFF;
212 ultra_timing &= ~(0x0F << (4*unit));
213 ultra_enable &= ~(0x01 << drive->dn);
214 csb5_pio &= ~(0x0F << (4*drive->dn));
215
216 switch(speed) {
217 case XFER_PIO_4:
218 case XFER_PIO_3:
219 case XFER_PIO_2:
220 case XFER_PIO_1:
221 case XFER_PIO_0:
222 pio_timing |= pio_modes[speed - XFER_PIO_0];
223 csb5_pio |= ((speed - XFER_PIO_0) << (4*drive->dn));
224 break;
225
226 case XFER_MW_DMA_2:
227 case XFER_MW_DMA_1:
228 case XFER_MW_DMA_0:
229 pio_timing |= pio_modes[pio];
230 csb5_pio |= (pio << (4*drive->dn));
231 dma_timing |= dma_modes[speed - XFER_MW_DMA_0];
232 break;
233
234 case XFER_UDMA_5:
235 case XFER_UDMA_4:
236 case XFER_UDMA_3:
237 case XFER_UDMA_2:
238 case XFER_UDMA_1:
239 case XFER_UDMA_0:
240 pio_timing |= pio_modes[pio];
241 csb5_pio |= (pio << (4*drive->dn));
242 dma_timing |= dma_modes[2];
243 ultra_timing |= ((udma_modes[speed - XFER_UDMA_0]) << (4*unit));
244 ultra_enable |= (0x01 << drive->dn);
245 default:
246 break;
247 }
248
249 pci_write_config_byte(dev, drive_pci[drive->dn], pio_timing);
250 if (csb5)
251 pci_write_config_word(dev, 0x4A, csb5_pio);
252
253 pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing);
254 pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing);
255 pci_write_config_byte(dev, 0x54, ultra_enable);
256
257 return (ide_config_drive_speed(drive, speed));
258}
259
260static void config_chipset_for_pio (ide_drive_t *drive)
261{
262 u16 eide_pio_timing[6] = {960, 480, 240, 180, 120, 90};
263 u16 xfer_pio = drive->id->eide_pio_modes;
264 u8 timing, speed, pio;
265
266 pio = ide_get_best_pio_mode(drive, 255, 5, NULL);
267
268 if (xfer_pio > 4)
269 xfer_pio = 0;
270
271 if (drive->id->eide_pio_iordy > 0)
272 for (xfer_pio = 5;
273 xfer_pio>0 &&
274 drive->id->eide_pio_iordy>eide_pio_timing[xfer_pio];
275 xfer_pio--);
276 else
277 xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 :
278 (drive->id->eide_pio_modes & 2) ? 0x04 :
279 (drive->id->eide_pio_modes & 1) ? 0x03 :
280 (drive->id->tPIO & 2) ? 0x02 :
281 (drive->id->tPIO & 1) ? 0x01 : xfer_pio;
282
283 timing = (xfer_pio >= pio) ? xfer_pio : pio;
284
285 switch(timing) {
286 case 4: speed = XFER_PIO_4;break;
287 case 3: speed = XFER_PIO_3;break;
288 case 2: speed = XFER_PIO_2;break;
289 case 1: speed = XFER_PIO_1;break;
290 default:
291 speed = (!drive->id->tPIO) ? XFER_PIO_0 : XFER_PIO_SLOW;
292 break;
293 }
294 (void) svwks_tune_chipset(drive, speed);
295 drive->current_speed = speed;
296}
297
298static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
299{
300 if(pio == 255)
301 (void) svwks_tune_chipset(drive, 255);
302 else
303 (void) svwks_tune_chipset(drive, (XFER_PIO_0 + pio));
304}
305
306static int config_chipset_for_dma (ide_drive_t *drive)
307{
308 u8 speed = ide_dma_speed(drive, svwks_ratemask(drive));
309
310 if (!(speed))
311 speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL);
312
313 (void) svwks_tune_chipset(drive, speed);
314 return ide_dma_enable(drive);
315}
316
317static int svwks_config_drive_xfer_rate (ide_drive_t *drive)
318{
319 ide_hwif_t *hwif = HWIF(drive);
320 struct hd_driveid *id = drive->id;
321
322 drive->init_speed = 0;
323
324 if ((id->capability & 1) && drive->autodma) {
325
326 if (ide_use_dma(drive)) {
327 if (config_chipset_for_dma(drive))
328 return hwif->ide_dma_on(drive);
329 }
330
331 goto fast_ata_pio;
332
333 } else if ((id->capability & 8) || (id->field_valid & 2)) {
334fast_ata_pio:
335 config_chipset_for_pio(drive);
336 // hwif->tuneproc(drive, 5);
337 return hwif->ide_dma_off_quietly(drive);
338 }
339 /* IORDY not supported */
340 return 0;
341}
342
343/* This can go soon */
344
345static int svwks_ide_dma_end (ide_drive_t *drive)
346{
347 return __ide_dma_end(drive);
348}
349
350static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const char *name)
351{
352 unsigned int reg;
353 u8 btr;
354
355 /* save revision id to determine DMA capability */
356 pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
357
358 /* force Master Latency Timer value to 64 PCICLKs */
359 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
360
361 /* OSB4 : South Bridge and IDE */
362 if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
363 isa_dev = pci_find_device(PCI_VENDOR_ID_SERVERWORKS,
364 PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
365 if (isa_dev) {
366 pci_read_config_dword(isa_dev, 0x64, &reg);
367 reg &= ~0x00002000; /* disable 600ns interrupt mask */
368 if(!(reg & 0x00004000))
369 printk(KERN_DEBUG "%s: UDMA not BIOS enabled.\n", name);
370 reg |= 0x00004000; /* enable UDMA/33 support */
371 pci_write_config_dword(isa_dev, 0x64, reg);
372 }
373 }
374
375 /* setup CSB5/CSB6 : South Bridge and IDE option RAID */
376 else if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ||
377 (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
378 (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
379
380 /* Third Channel Test */
381 if (!(PCI_FUNC(dev->devfn) & 1)) {
382 struct pci_dev * findev = NULL;
383 u32 reg4c = 0;
384 findev = pci_find_device(PCI_VENDOR_ID_SERVERWORKS,
385 PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL);
386 if (findev) {
387 pci_read_config_dword(findev, 0x4C, &reg4c);
388 reg4c &= ~0x000007FF;
389 reg4c |= 0x00000040;
390 reg4c |= 0x00000020;
391 pci_write_config_dword(findev, 0x4C, reg4c);
392 }
393 outb_p(0x06, 0x0c00);
394 dev->irq = inb_p(0x0c01);
395#if 0
396 printk("%s: device class (0x%04x)\n",
397 name, dev->class);
398 if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) {
399 dev->class &= ~0x000F0F00;
400 // dev->class |= ~0x00000400;
401 dev->class |= ~0x00010100;
402 /**/
403 }
404#endif
405 } else {
406 struct pci_dev * findev = NULL;
407 u8 reg41 = 0;
408
409 findev = pci_find_device(PCI_VENDOR_ID_SERVERWORKS,
410 PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL);
411 if (findev) {
412 pci_read_config_byte(findev, 0x41, &reg41);
413 reg41 &= ~0x40;
414 pci_write_config_byte(findev, 0x41, reg41);
415 }
416 /*
417 * This is a device pin issue on CSB6.
418 * Since there will be a future raid mode,
419 * early versions of the chipset require the
420 * interrupt pin to be set, and it is a compatibility
421 * mode issue.
422 */
423 if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)
424 dev->irq = 0;
425 }
426// pci_read_config_dword(dev, 0x40, &pioreg)
427// pci_write_config_dword(dev, 0x40, 0x99999999);
428// pci_read_config_dword(dev, 0x44, &dmareg);
429// pci_write_config_dword(dev, 0x44, 0xFFFFFFFF);
430 /* setup the UDMA Control register
431 *
432 * 1. clear bit 6 to enable DMA
433 * 2. enable DMA modes with bits 0-1
434 * 00 : legacy
435 * 01 : udma2
436 * 10 : udma2/udma4
437 * 11 : udma2/udma4/udma5
438 */
439 pci_read_config_byte(dev, 0x5A, &btr);
440 btr &= ~0x40;
441 if (!(PCI_FUNC(dev->devfn) & 1))
442 btr |= 0x2;
443 else
444 btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
445 pci_write_config_byte(dev, 0x5A, btr);
446 }
84f57fbc
NS		 447 /* Setup HT1000 SouthBridge Controller - Single Channel Only */
448 else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
449 pci_read_config_byte(dev, 0x5A, &btr);
450 btr &= ~0x40;
451 btr |= 0x3;
452 pci_write_config_byte(dev, 0x5A, btr);
453 }
1da177e4
LT		 454
455 return (dev->irq) ? dev->irq : 0;
456}
457
bb732d7b 458static unsigned int __devinit ata66_svwks_svwks (ide_hwif_t *hwif)
1da177e4
LT		 459{
460 return 1;
461}
462
463/* On Dell PowerEdge servers with a CSB5/CSB6, the top two bits
464 * of the subsystem device ID indicate presence of an 80-pin cable.
465 * Bit 15 clear = secondary IDE channel does not have 80-pin cable.
466 * Bit 15 set = secondary IDE channel has 80-pin cable.
467 * Bit 14 clear = primary IDE channel does not have 80-pin cable.
468 * Bit 14 set = primary IDE channel has 80-pin cable.
469 */
bb732d7b 470static unsigned int __devinit ata66_svwks_dell (ide_hwif_t *hwif)
1da177e4
LT		 471{
472 struct pci_dev *dev = hwif->pci_dev;
473 if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
474 dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
475 (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE ||
476 dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE))
477 return ((1 << (hwif->channel + 14)) &
478 dev->subsystem_device) ? 1 : 0;
479 return 0;
480}
481
482/* Sun Cobalt Alpine hardware avoids the 80-pin cable
483 * detect issue by attaching the drives directly to the board.
484 * This check follows the Dell precedent (how scary is that?!)
485 *
486 * WARNING: this only works on Alpine hardware!
487 */
bb732d7b 488static unsigned int __devinit ata66_svwks_cobalt (ide_hwif_t *hwif)
1da177e4
LT		 489{
490 struct pci_dev *dev = hwif->pci_dev;
491 if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN &&
492 dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
493 dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
494 return ((1 << (hwif->channel + 14)) &
495 dev->subsystem_device) ? 1 : 0;
496 return 0;
497}
498
bb732d7b 499static unsigned int __devinit ata66_svwks (ide_hwif_t *hwif)
1da177e4
LT		 500{
501 struct pci_dev *dev = hwif->pci_dev;
502
503 /* Per Specified Design by OEM, and ASIC Architect */
504 if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
505 (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2))
506 return 1;
507
508 /* Server Works */
509 if (dev->subsystem_vendor == PCI_VENDOR_ID_SERVERWORKS)
510 return ata66_svwks_svwks (hwif);
511
512 /* Dell PowerEdge */
513 if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL)
514 return ata66_svwks_dell (hwif);
515
516 /* Cobalt Alpine */
517 if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN)
518 return ata66_svwks_cobalt (hwif);
519
520 return 0;
521}
522
523#undef CAN_SW_DMA
524static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
525{
526 u8 dma_stat = 0;
527
528 if (!hwif->irq)
529 hwif->irq = hwif->channel ? 15 : 14;
530
531 hwif->tuneproc = &svwks_tune_drive;
532 hwif->speedproc = &svwks_tune_chipset;
533
534 hwif->atapi_dma = 1;
535
536 if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE)
537 hwif->ultra_mask = 0x3f;
538
539 hwif->mwdma_mask = 0x07;
540#ifdef CAN_SW_DMA
541 hwif->swdma_mask = 0x07;
542#endif /* CAN_SW_DMA */
543
544 hwif->autodma = 0;
545
546 if (!hwif->dma_base) {
547 hwif->drives[0].autotune = 1;
548 hwif->drives[1].autotune = 1;
549 return;
550 }
551
552 hwif->ide_dma_check = &svwks_config_drive_xfer_rate;
553 if (hwif->pci_dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE)
554 hwif->ide_dma_end = &svwks_ide_dma_end;
555 else if (!(hwif->udma_four))
556 hwif->udma_four = ata66_svwks(hwif);
557 if (!noautodma)
558 hwif->autodma = 1;
559
560 dma_stat = hwif->INB(hwif->dma_status);
561 hwif->drives[0].autodma = (dma_stat & 0x20);
562 hwif->drives[1].autodma = (dma_stat & 0x40);
563 hwif->drives[0].autotune = (!(dma_stat & 0x20));
564 hwif->drives[1].autotune = (!(dma_stat & 0x40));
565// hwif->drives[0].autodma = hwif->autodma;
566// hwif->drives[1].autodma = hwif->autodma;
567}
568
569/*
570 * We allow the BM-DMA driver to only work on enabled interfaces.
571 */
572static void __devinit init_dma_svwks (ide_hwif_t *hwif, unsigned long dmabase)
573{
574 struct pci_dev *dev = hwif->pci_dev;
575
576 if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
577 (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) &&
578 (!(PCI_FUNC(dev->devfn) & 1)) && (hwif->channel))
579 return;
580
581 ide_setup_dma(hwif, dmabase, 8);
582}
583
584static int __devinit init_setup_svwks (struct pci_dev *dev, ide_pci_device_t *d)
585{
586 return ide_setup_pci_device(dev, d);
587}
588
bb732d7b 589static int __devinit init_setup_csb6 (struct pci_dev *dev, ide_pci_device_t *d)
1da177e4
LT		 590{
591 if (!(PCI_FUNC(dev->devfn) & 1)) {
592 d->bootable = NEVER_BOARD;
593 if (dev->resource[0].start == 0x01f1)
594 d->bootable = ON_BOARD;
595 }
596#if 0
597 if ((IDE_PCI_DEVID_EQ(d->devid, DEVID_CSB6) &&
598 (!(PCI_FUNC(dev->devfn) & 1)))
599 d->autodma = AUTODMA;
600#endif
601
602 d->channels = ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE ||
603 dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) &&
604 (!(PCI_FUNC(dev->devfn) & 1))) ? 1 : 2;
605
606 return ide_setup_pci_device(dev, d);
607}
608
609static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
610 { /* 0 */
611 .name = "SvrWks OSB4",
612 .init_setup = init_setup_svwks,
613 .init_chipset = init_chipset_svwks,
614 .init_hwif = init_hwif_svwks,
615 .channels = 2,
616 .autodma = AUTODMA,
617 .bootable = ON_BOARD,
618 },{ /* 1 */
619 .name = "SvrWks CSB5",
620 .init_setup = init_setup_svwks,
621 .init_chipset = init_chipset_svwks,
622 .init_hwif = init_hwif_svwks,
623 .init_dma = init_dma_svwks,
624 .channels = 2,
625 .autodma = AUTODMA,
626 .bootable = ON_BOARD,
627 },{ /* 2 */
628 .name = "SvrWks CSB6",
629 .init_setup = init_setup_csb6,
630 .init_chipset = init_chipset_svwks,
631 .init_hwif = init_hwif_svwks,
632 .init_dma = init_dma_svwks,
633 .channels = 2,
634 .autodma = AUTODMA,
635 .bootable = ON_BOARD,
636 },{ /* 3 */
637 .name = "SvrWks CSB6",
638 .init_setup = init_setup_csb6,
639 .init_chipset = init_chipset_svwks,
640 .init_hwif = init_hwif_svwks,
641 .init_dma = init_dma_svwks,
642 .channels = 1, /* 2 */
643 .autodma = AUTODMA,
644 .bootable = ON_BOARD,
84f57fbc
NS		 645 },{ /* 4 */
646 .name = "SvrWks HT1000",
647 .init_setup = init_setup_svwks,
648 .init_chipset = init_chipset_svwks,
649 .init_hwif = init_hwif_svwks,
650 .init_dma = init_dma_svwks,
651 .channels = 1, /* 2 */
652 .autodma = AUTODMA,
653 .bootable = ON_BOARD,
1da177e4
LT		 654 }
655};
656
657/**
658 * svwks_init_one - called when a OSB/CSB is found
659 * @dev: the svwks device
660 * @id: the matching pci id
661 *
662 * Called when the PCI registration layer (or the IDE initialization)
663 * finds a device matching our IDE device tables.
664 */
665
666static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id)
667{
668 ide_pci_device_t *d = &serverworks_chipsets[id->driver_data];
669
670 return d->init_setup(dev, d);
671}
672
673static struct pci_device_id svwks_pci_tbl[] = {
674 { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
675 { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
676 { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
677 { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
84f57fbc 678 { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
1da177e4
LT		 679 { 0, },
680};
681MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);
682
683static struct pci_driver driver = {
684 .name = "Serverworks_IDE",
685 .id_table = svwks_pci_tbl,
686 .probe = svwks_init_one,
687};
688
689static int svwks_ide_init(void)
690{
691 return ide_pci_register_driver(&driver);
692}
693
694module_init(svwks_ide_init);
695
696MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick");
697MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE");
698MODULE_LICENSE("GPL");
kernel source for telekom puls (alcatel/mediatek)