Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Promise TX2/TX4/TX2000/133 IDE driver | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or | |
5 | * modify it under the terms of the GNU General Public License | |
6 | * as published by the Free Software Foundation; either version | |
7 | * 2 of the License, or (at your option) any later version. | |
8 | * | |
9 | * Split from: | |
10 | * linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002 | |
11 | * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> | |
35198234 | 12 | * Copyright (C) 2005-2007 MontaVista Software, Inc. |
1da177e4 LT |
13 | * Portions Copyright (C) 1999 Promise Technology, Inc. |
14 | * Author: Frank Tiernan (frankt@promise.com) | |
15 | * Released under terms of General Public License | |
16 | */ | |
17 | ||
1da177e4 LT |
18 | #include <linux/module.h> |
19 | #include <linux/types.h> | |
20 | #include <linux/kernel.h> | |
21 | #include <linux/delay.h> | |
22 | #include <linux/timer.h> | |
23 | #include <linux/mm.h> | |
24 | #include <linux/ioport.h> | |
25 | #include <linux/blkdev.h> | |
26 | #include <linux/hdreg.h> | |
27 | #include <linux/interrupt.h> | |
28 | #include <linux/pci.h> | |
29 | #include <linux/init.h> | |
30 | #include <linux/ide.h> | |
31 | ||
32 | #include <asm/io.h> | |
33 | #include <asm/irq.h> | |
34 | ||
35 | #ifdef CONFIG_PPC_PMAC | |
36 | #include <asm/prom.h> | |
37 | #include <asm/pci-bridge.h> | |
38 | #endif | |
39 | ||
47694bb8 SS |
40 | #undef DEBUG |
41 | ||
42 | #ifdef DEBUG | |
43 | #define DBG(fmt, args...) printk("%s: " fmt, __FUNCTION__, ## args) | |
44 | #else | |
45 | #define DBG(fmt, args...) | |
46 | #endif | |
47 | ||
3c6bee1d | 48 | static const char *pdc_quirk_drives[] = { |
1da177e4 LT |
49 | "QUANTUM FIREBALLlct08 08", |
50 | "QUANTUM FIREBALLP KA6.4", | |
51 | "QUANTUM FIREBALLP KA9.1", | |
52 | "QUANTUM FIREBALLP LM20.4", | |
53 | "QUANTUM FIREBALLP KX13.6", | |
54 | "QUANTUM FIREBALLP KX20.5", | |
55 | "QUANTUM FIREBALLP KX27.3", | |
56 | "QUANTUM FIREBALLP LM20.5", | |
57 | NULL | |
58 | }; | |
59 | ||
47694bb8 | 60 | static u8 max_dma_rate(struct pci_dev *pdev) |
1da177e4 LT |
61 | { |
62 | u8 mode; | |
63 | ||
47694bb8 | 64 | switch(pdev->device) { |
1da177e4 LT |
65 | case PCI_DEVICE_ID_PROMISE_20277: |
66 | case PCI_DEVICE_ID_PROMISE_20276: | |
67 | case PCI_DEVICE_ID_PROMISE_20275: | |
68 | case PCI_DEVICE_ID_PROMISE_20271: | |
69 | case PCI_DEVICE_ID_PROMISE_20269: | |
70 | mode = 4; | |
71 | break; | |
72 | case PCI_DEVICE_ID_PROMISE_20270: | |
73 | case PCI_DEVICE_ID_PROMISE_20268: | |
74 | mode = 3; | |
75 | break; | |
76 | default: | |
77 | return 0; | |
78 | } | |
47694bb8 | 79 | |
1da177e4 LT |
80 | return mode; |
81 | } | |
82 | ||
47694bb8 SS |
83 | /** |
84 | * get_indexed_reg - Get indexed register | |
85 | * @hwif: for the port address | |
86 | * @index: index of the indexed register | |
87 | */ | |
88 | static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index) | |
89 | { | |
90 | u8 value; | |
91 | ||
0ecdca26 BZ |
92 | outb(index, hwif->dma_vendor1); |
93 | value = inb(hwif->dma_vendor3); | |
47694bb8 SS |
94 | |
95 | DBG("index[%02X] value[%02X]\n", index, value); | |
96 | return value; | |
97 | } | |
98 | ||
99 | /** | |
100 | * set_indexed_reg - Set indexed register | |
101 | * @hwif: for the port address | |
102 | * @index: index of the indexed register | |
103 | */ | |
104 | static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value) | |
105 | { | |
0ecdca26 BZ |
106 | outb(index, hwif->dma_vendor1); |
107 | outb(value, hwif->dma_vendor3); | |
47694bb8 SS |
108 | DBG("index[%02X] value[%02X]\n", index, value); |
109 | } | |
110 | ||
111 | /* | |
112 | * ATA Timing Tables based on 133 MHz PLL output clock. | |
113 | * | |
114 | * If the PLL outputs 100 MHz clock, the ASIC hardware will set | |
115 | * the timing registers automatically when "set features" command is | |
116 | * issued to the device. However, if the PLL output clock is 133 MHz, | |
117 | * the following tables must be used. | |
118 | */ | |
119 | static struct pio_timing { | |
120 | u8 reg0c, reg0d, reg13; | |
121 | } pio_timings [] = { | |
122 | { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */ | |
123 | { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */ | |
124 | { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */ | |
125 | { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */ | |
126 | { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ | |
127 | }; | |
128 | ||
129 | static struct mwdma_timing { | |
130 | u8 reg0e, reg0f; | |
131 | } mwdma_timings [] = { | |
132 | { 0xdf, 0x5f }, /* MWDMA mode 0 */ | |
133 | { 0x6b, 0x27 }, /* MWDMA mode 1 */ | |
134 | { 0x69, 0x25 }, /* MWDMA mode 2 */ | |
135 | }; | |
136 | ||
137 | static struct udma_timing { | |
138 | u8 reg10, reg11, reg12; | |
139 | } udma_timings [] = { | |
140 | { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ | |
141 | { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */ | |
142 | { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */ | |
143 | { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */ | |
144 | { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */ | |
145 | { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */ | |
146 | { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ | |
147 | }; | |
148 | ||
ad4ba7dc | 149 | static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed) |
1da177e4 LT |
150 | { |
151 | ide_hwif_t *hwif = HWIF(drive); | |
47694bb8 | 152 | u8 adj = (drive->dn & 1) ? 0x08 : 0x00; |
1da177e4 | 153 | |
47694bb8 | 154 | /* |
88b2b32b BZ |
155 | * IDE core issues SETFEATURES_XFER to the drive first (thanks to |
156 | * IDE_HFLAG_POST_SET_MODE in ->host_flags). PDC202xx hardware will | |
47694bb8 | 157 | * automatically set the timing registers based on 100 MHz PLL output. |
88b2b32b | 158 | * |
47694bb8 SS |
159 | * As we set up the PLL to output 133 MHz for UltraDMA/133 capable |
160 | * chips, we must override the default register settings... | |
161 | */ | |
162 | if (max_dma_rate(hwif->pci_dev) == 4) { | |
163 | u8 mode = speed & 0x07; | |
164 | ||
4db90a14 BZ |
165 | if (speed >= XFER_UDMA_0) { |
166 | set_indexed_reg(hwif, 0x10 + adj, | |
167 | udma_timings[mode].reg10); | |
168 | set_indexed_reg(hwif, 0x11 + adj, | |
169 | udma_timings[mode].reg11); | |
170 | set_indexed_reg(hwif, 0x12 + adj, | |
171 | udma_timings[mode].reg12); | |
172 | } else { | |
173 | set_indexed_reg(hwif, 0x0e + adj, | |
174 | mwdma_timings[mode].reg0e); | |
175 | set_indexed_reg(hwif, 0x0f + adj, | |
176 | mwdma_timings[mode].reg0f); | |
47694bb8 SS |
177 | } |
178 | } else if (speed == XFER_UDMA_2) { | |
179 | /* Set tHOLD bit to 0 if using UDMA mode 2 */ | |
180 | u8 tmp = get_indexed_reg(hwif, 0x10 + adj); | |
181 | ||
182 | set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f); | |
183 | } | |
1da177e4 LT |
184 | } |
185 | ||
26bcb879 | 186 | static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) |
1da177e4 | 187 | { |
ad4ba7dc BZ |
188 | ide_hwif_t *hwif = drive->hwif; |
189 | u8 adj = (drive->dn & 1) ? 0x08 : 0x00; | |
190 | ||
191 | if (max_dma_rate(hwif->pci_dev) == 4) { | |
192 | set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c); | |
193 | set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d); | |
194 | set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13); | |
195 | } | |
1da177e4 LT |
196 | } |
197 | ||
47694bb8 | 198 | static u8 pdcnew_cable_detect(ide_hwif_t *hwif) |
1da177e4 | 199 | { |
49521f97 BZ |
200 | if (get_indexed_reg(hwif, 0x0b) & 0x04) |
201 | return ATA_CBL_PATA40; | |
202 | else | |
203 | return ATA_CBL_PATA80; | |
1da177e4 | 204 | } |
47694bb8 | 205 | |
f01393e4 | 206 | static void pdcnew_quirkproc(ide_drive_t *drive) |
1da177e4 | 207 | { |
d24ec426 SS |
208 | const char **list, *model = drive->id->model; |
209 | ||
210 | for (list = pdc_quirk_drives; *list != NULL; list++) | |
f01393e4 BZ |
211 | if (strstr(model, *list) != NULL) { |
212 | drive->quirk_list = 2; | |
213 | return; | |
214 | } | |
215 | ||
216 | drive->quirk_list = 0; | |
1da177e4 LT |
217 | } |
218 | ||
47694bb8 | 219 | static void pdcnew_reset(ide_drive_t *drive) |
1da177e4 LT |
220 | { |
221 | /* | |
222 | * Deleted this because it is redundant from the caller. | |
223 | */ | |
47694bb8 | 224 | printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n", |
1da177e4 LT |
225 | HWIF(drive)->channel ? "Secondary" : "Primary"); |
226 | } | |
227 | ||
47694bb8 SS |
228 | /** |
229 | * read_counter - Read the byte count registers | |
230 | * @dma_base: for the port address | |
231 | */ | |
232 | static long __devinit read_counter(u32 dma_base) | |
233 | { | |
234 | u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08; | |
235 | u8 cnt0, cnt1, cnt2, cnt3; | |
236 | long count = 0, last; | |
237 | int retry = 3; | |
238 | ||
239 | do { | |
240 | last = count; | |
241 | ||
242 | /* Read the current count */ | |
243 | outb(0x20, pri_dma_base + 0x01); | |
244 | cnt0 = inb(pri_dma_base + 0x03); | |
245 | outb(0x21, pri_dma_base + 0x01); | |
246 | cnt1 = inb(pri_dma_base + 0x03); | |
247 | outb(0x20, sec_dma_base + 0x01); | |
248 | cnt2 = inb(sec_dma_base + 0x03); | |
249 | outb(0x21, sec_dma_base + 0x01); | |
250 | cnt3 = inb(sec_dma_base + 0x03); | |
251 | ||
252 | count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0; | |
253 | ||
254 | /* | |
255 | * The 30-bit decrementing counter is read in 4 pieces. | |
256 | * Incorrect value may be read when the most significant bytes | |
257 | * are changing... | |
258 | */ | |
259 | } while (retry-- && (((last ^ count) & 0x3fff8000) || last < count)); | |
260 | ||
261 | DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n", | |
262 | cnt0, cnt1, cnt2, cnt3); | |
263 | ||
264 | return count; | |
265 | } | |
266 | ||
267 | /** | |
268 | * detect_pll_input_clock - Detect the PLL input clock in Hz. | |
269 | * @dma_base: for the port address | |
270 | * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock. | |
271 | */ | |
272 | static long __devinit detect_pll_input_clock(unsigned long dma_base) | |
273 | { | |
8006bf56 | 274 | struct timeval start_time, end_time; |
47694bb8 | 275 | long start_count, end_count; |
8006bf56 | 276 | long pll_input, usec_elapsed; |
47694bb8 SS |
277 | u8 scr1; |
278 | ||
279 | start_count = read_counter(dma_base); | |
8006bf56 | 280 | do_gettimeofday(&start_time); |
47694bb8 SS |
281 | |
282 | /* Start the test mode */ | |
283 | outb(0x01, dma_base + 0x01); | |
284 | scr1 = inb(dma_base + 0x03); | |
285 | DBG("scr1[%02X]\n", scr1); | |
286 | outb(scr1 | 0x40, dma_base + 0x03); | |
287 | ||
288 | /* Let the counter run for 10 ms. */ | |
289 | mdelay(10); | |
290 | ||
291 | end_count = read_counter(dma_base); | |
8006bf56 | 292 | do_gettimeofday(&end_time); |
47694bb8 SS |
293 | |
294 | /* Stop the test mode */ | |
295 | outb(0x01, dma_base + 0x01); | |
296 | scr1 = inb(dma_base + 0x03); | |
297 | DBG("scr1[%02X]\n", scr1); | |
298 | outb(scr1 & ~0x40, dma_base + 0x03); | |
299 | ||
300 | /* | |
301 | * Calculate the input clock in Hz | |
302 | * (the clock counter is 30 bit wide and counts down) | |
303 | */ | |
8006bf56 AL |
304 | usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 + |
305 | (end_time.tv_usec - start_time.tv_usec); | |
56fe23d5 | 306 | pll_input = ((start_count - end_count) & 0x3fffffff) / 10 * |
8006bf56 | 307 | (10000000 / usec_elapsed); |
47694bb8 SS |
308 | |
309 | DBG("start[%ld] end[%ld]\n", start_count, end_count); | |
310 | ||
311 | return pll_input; | |
312 | } | |
313 | ||
1da177e4 LT |
314 | #ifdef CONFIG_PPC_PMAC |
315 | static void __devinit apple_kiwi_init(struct pci_dev *pdev) | |
316 | { | |
317 | struct device_node *np = pci_device_to_OF_node(pdev); | |
1da177e4 LT |
318 | u8 conf; |
319 | ||
55b61fec | 320 | if (np == NULL || !of_device_is_compatible(np, "kiwi-root")) |
1da177e4 LT |
321 | return; |
322 | ||
fc212bb1 | 323 | if (pdev->revision >= 0x03) { |
1da177e4 | 324 | /* Setup chip magic config stuff (from darwin) */ |
47694bb8 SS |
325 | pci_read_config_byte (pdev, 0x40, &conf); |
326 | pci_write_config_byte(pdev, 0x40, (conf | 0x01)); | |
1da177e4 | 327 | } |
1da177e4 LT |
328 | } |
329 | #endif /* CONFIG_PPC_PMAC */ | |
330 | ||
331 | static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name) | |
332 | { | |
47694bb8 SS |
333 | unsigned long dma_base = pci_resource_start(dev, 4); |
334 | unsigned long sec_dma_base = dma_base + 0x08; | |
335 | long pll_input, pll_output, ratio; | |
336 | int f, r; | |
337 | u8 pll_ctl0, pll_ctl1; | |
338 | ||
01cc643a BZ |
339 | if (dma_base == 0) |
340 | return -EFAULT; | |
341 | ||
1da177e4 LT |
342 | #ifdef CONFIG_PPC_PMAC |
343 | apple_kiwi_init(dev); | |
344 | #endif | |
345 | ||
47694bb8 SS |
346 | /* Calculate the required PLL output frequency */ |
347 | switch(max_dma_rate(dev)) { | |
348 | case 4: /* it's 133 MHz for Ultra133 chips */ | |
349 | pll_output = 133333333; | |
350 | break; | |
351 | case 3: /* and 100 MHz for Ultra100 chips */ | |
352 | default: | |
353 | pll_output = 100000000; | |
354 | break; | |
355 | } | |
356 | ||
357 | /* | |
358 | * Detect PLL input clock. | |
359 | * On some systems, where PCI bus is running at non-standard clock rate | |
360 | * (e.g. 25 or 40 MHz), we have to adjust the cycle time. | |
361 | * PDC20268 and newer chips employ PLL circuit to help correct timing | |
362 | * registers setting. | |
363 | */ | |
364 | pll_input = detect_pll_input_clock(dma_base); | |
365 | printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000); | |
366 | ||
367 | /* Sanity check */ | |
368 | if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) { | |
369 | printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n", | |
370 | name, pll_input); | |
371 | goto out; | |
372 | } | |
373 | ||
374 | #ifdef DEBUG | |
375 | DBG("pll_output is %ld Hz\n", pll_output); | |
376 | ||
377 | /* Show the current clock value of PLL control register | |
378 | * (maybe already configured by the BIOS) | |
379 | */ | |
380 | outb(0x02, sec_dma_base + 0x01); | |
381 | pll_ctl0 = inb(sec_dma_base + 0x03); | |
382 | outb(0x03, sec_dma_base + 0x01); | |
383 | pll_ctl1 = inb(sec_dma_base + 0x03); | |
384 | ||
385 | DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); | |
386 | #endif | |
387 | ||
388 | /* | |
389 | * Calculate the ratio of F, R and NO | |
390 | * POUT = (F + 2) / (( R + 2) * NO) | |
391 | */ | |
392 | ratio = pll_output / (pll_input / 1000); | |
393 | if (ratio < 8600L) { /* 8.6x */ | |
394 | /* Using NO = 0x01, R = 0x0d */ | |
395 | r = 0x0d; | |
396 | } else if (ratio < 12900L) { /* 12.9x */ | |
397 | /* Using NO = 0x01, R = 0x08 */ | |
398 | r = 0x08; | |
399 | } else if (ratio < 16100L) { /* 16.1x */ | |
400 | /* Using NO = 0x01, R = 0x06 */ | |
401 | r = 0x06; | |
402 | } else if (ratio < 64000L) { /* 64x */ | |
403 | r = 0x00; | |
404 | } else { | |
405 | /* Invalid ratio */ | |
406 | printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio); | |
407 | goto out; | |
408 | } | |
409 | ||
410 | f = (ratio * (r + 2)) / 1000 - 2; | |
411 | ||
412 | DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio); | |
413 | ||
414 | if (unlikely(f < 0 || f > 127)) { | |
415 | /* Invalid F */ | |
416 | printk(KERN_ERR "%s: F[%d] invalid!\n", name, f); | |
417 | goto out; | |
418 | } | |
419 | ||
420 | pll_ctl0 = (u8) f; | |
421 | pll_ctl1 = (u8) r; | |
422 | ||
423 | DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); | |
424 | ||
425 | outb(0x02, sec_dma_base + 0x01); | |
426 | outb(pll_ctl0, sec_dma_base + 0x03); | |
427 | outb(0x03, sec_dma_base + 0x01); | |
428 | outb(pll_ctl1, sec_dma_base + 0x03); | |
429 | ||
430 | /* Wait the PLL circuit to be stable */ | |
431 | mdelay(30); | |
432 | ||
433 | #ifdef DEBUG | |
434 | /* | |
435 | * Show the current clock value of PLL control register | |
436 | */ | |
437 | outb(0x02, sec_dma_base + 0x01); | |
438 | pll_ctl0 = inb(sec_dma_base + 0x03); | |
439 | outb(0x03, sec_dma_base + 0x01); | |
440 | pll_ctl1 = inb(sec_dma_base + 0x03); | |
441 | ||
442 | DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); | |
443 | #endif | |
444 | ||
445 | out: | |
1da177e4 LT |
446 | return dev->irq; |
447 | } | |
448 | ||
449 | static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) | |
450 | { | |
26bcb879 | 451 | hwif->set_pio_mode = &pdcnew_set_pio_mode; |
ad4ba7dc | 452 | hwif->set_dma_mode = &pdcnew_set_dma_mode; |
26bcb879 | 453 | |
1da177e4 | 454 | hwif->quirkproc = &pdcnew_quirkproc; |
47694bb8 | 455 | hwif->resetproc = &pdcnew_reset; |
1da177e4 | 456 | |
01cc643a BZ |
457 | if (hwif->dma_base == 0) |
458 | return; | |
459 | ||
49521f97 BZ |
460 | if (hwif->cbl != ATA_CBL_PATA40_SHORT) |
461 | hwif->cbl = pdcnew_cable_detect(hwif); | |
1da177e4 LT |
462 | } |
463 | ||
099b1f42 | 464 | static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) |
1da177e4 | 465 | { |
099b1f42 BZ |
466 | struct pci_dev *dev2; |
467 | ||
eadb6ecf | 468 | dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 1, |
099b1f42 | 469 | PCI_FUNC(dev->devfn))); |
eadb6ecf | 470 | |
099b1f42 BZ |
471 | if (dev2 && |
472 | dev2->vendor == dev->vendor && | |
473 | dev2->device == dev->device) { | |
474 | ||
475 | if (dev2->irq != dev->irq) { | |
476 | dev2->irq = dev->irq; | |
477 | printk(KERN_INFO "PDC20270: PCI config space " | |
478 | "interrupt fixed\n"); | |
1da177e4 | 479 | } |
07047935 | 480 | |
099b1f42 | 481 | return dev2; |
1da177e4 | 482 | } |
099b1f42 BZ |
483 | |
484 | return NULL; | |
1da177e4 LT |
485 | } |
486 | ||
05d7e6cb BZ |
487 | #define DECLARE_PDCNEW_DEV(name_str, udma) \ |
488 | { \ | |
489 | .name = name_str, \ | |
490 | .init_chipset = init_chipset_pdcnew, \ | |
491 | .init_hwif = init_hwif_pdc202new, \ | |
492 | .host_flags = IDE_HFLAG_POST_SET_MODE | \ | |
ed67b923 | 493 | IDE_HFLAG_ERROR_STOPS_FIFO | \ |
05d7e6cb BZ |
494 | IDE_HFLAG_OFF_BOARD, \ |
495 | .pio_mask = ATA_PIO4, \ | |
496 | .mwdma_mask = ATA_MWDMA2, \ | |
497 | .udma_mask = udma, \ | |
1da177e4 | 498 | } |
05d7e6cb | 499 | |
85620436 | 500 | static const struct ide_port_info pdcnew_chipsets[] __devinitdata = { |
05d7e6cb BZ |
501 | /* 0 */ DECLARE_PDCNEW_DEV("PDC20268", ATA_UDMA5), |
502 | /* 1 */ DECLARE_PDCNEW_DEV("PDC20269", ATA_UDMA6), | |
503 | /* 2 */ DECLARE_PDCNEW_DEV("PDC20270", ATA_UDMA5), | |
504 | /* 3 */ DECLARE_PDCNEW_DEV("PDC20271", ATA_UDMA6), | |
505 | /* 4 */ DECLARE_PDCNEW_DEV("PDC20275", ATA_UDMA6), | |
506 | /* 5 */ DECLARE_PDCNEW_DEV("PDC20276", ATA_UDMA6), | |
507 | /* 6 */ DECLARE_PDCNEW_DEV("PDC20277", ATA_UDMA6), | |
1da177e4 LT |
508 | }; |
509 | ||
510 | /** | |
511 | * pdc202new_init_one - called when a pdc202xx is found | |
512 | * @dev: the pdc202new device | |
513 | * @id: the matching pci id | |
514 | * | |
515 | * Called when the PCI registration layer (or the IDE initialization) | |
516 | * finds a device matching our IDE device tables. | |
517 | */ | |
518 | ||
519 | static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |
520 | { | |
85620436 | 521 | const struct ide_port_info *d; |
099b1f42 BZ |
522 | struct pci_dev *bridge = dev->bus->self; |
523 | u8 idx = id->driver_data; | |
524 | ||
525 | d = &pdcnew_chipsets[idx]; | |
526 | ||
527 | if (idx == 2 && bridge && | |
528 | bridge->vendor == PCI_VENDOR_ID_DEC && | |
529 | bridge->device == PCI_DEVICE_ID_DEC_21150) { | |
530 | struct pci_dev *dev2; | |
531 | ||
532 | if (PCI_SLOT(dev->devfn) & 2) | |
533 | return -ENODEV; | |
1da177e4 | 534 | |
099b1f42 BZ |
535 | dev2 = pdc20270_get_dev2(dev); |
536 | ||
537 | if (dev2) { | |
538 | int ret = ide_setup_pci_devices(dev, dev2, d); | |
539 | if (ret < 0) | |
540 | pci_dev_put(dev2); | |
541 | return ret; | |
542 | } | |
543 | } | |
544 | ||
545 | if (idx == 5 && bridge && | |
546 | bridge->vendor == PCI_VENDOR_ID_INTEL && | |
547 | (bridge->device == PCI_DEVICE_ID_INTEL_I960 || | |
548 | bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) { | |
549 | printk(KERN_INFO "PDC20276: attached to I2O RAID controller, " | |
550 | "skipping\n"); | |
551 | return -ENODEV; | |
552 | } | |
553 | ||
554 | return ide_setup_pci_device(dev, d); | |
1da177e4 LT |
555 | } |
556 | ||
9cbcc5e3 BZ |
557 | static const struct pci_device_id pdc202new_pci_tbl[] = { |
558 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), 0 }, | |
559 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), 1 }, | |
560 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), 2 }, | |
561 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), 3 }, | |
562 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), 4 }, | |
563 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), 5 }, | |
564 | { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), 6 }, | |
1da177e4 LT |
565 | { 0, }, |
566 | }; | |
567 | MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl); | |
568 | ||
569 | static struct pci_driver driver = { | |
570 | .name = "Promise_IDE", | |
571 | .id_table = pdc202new_pci_tbl, | |
572 | .probe = pdc202new_init_one, | |
573 | }; | |
574 | ||
82ab1eec | 575 | static int __init pdc202new_ide_init(void) |
1da177e4 LT |
576 | { |
577 | return ide_pci_register_driver(&driver); | |
578 | } | |
579 | ||
580 | module_init(pdc202new_ide_init); | |
581 | ||
582 | MODULE_AUTHOR("Andre Hedrick, Frank Tiernan"); | |
583 | MODULE_DESCRIPTION("PCI driver module for Promise PDC20268 and higher"); | |
584 | MODULE_LICENSE("GPL"); |