Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
1da177e4 | 2 | * Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org> |
1da177e4 | 3 | * Copyright (C) 2000 Mark Lord <mlord@pobox.com> |
5fd216bb BZ |
4 | * Copyright (C) 2007 Bartlomiej Zolnierkiewicz |
5 | * | |
1da177e4 LT |
6 | * May be copied or modified under the terms of the GNU General Public License |
7 | * | |
8 | * Development of this chipset driver was funded | |
9 | * by the nice folks at National Semiconductor. | |
10 | * | |
11 | * Documentation: | |
12 | * CS5530 documentation available from National Semiconductor. | |
13 | */ | |
14 | ||
1da177e4 LT |
15 | #include <linux/module.h> |
16 | #include <linux/types.h> | |
17 | #include <linux/kernel.h> | |
18 | #include <linux/delay.h> | |
19 | #include <linux/timer.h> | |
20 | #include <linux/mm.h> | |
21 | #include <linux/ioport.h> | |
22 | #include <linux/blkdev.h> | |
23 | #include <linux/hdreg.h> | |
24 | #include <linux/interrupt.h> | |
25 | #include <linux/pci.h> | |
26 | #include <linux/init.h> | |
27 | #include <linux/ide.h> | |
28 | #include <asm/io.h> | |
29 | #include <asm/irq.h> | |
30 | ||
1da177e4 LT |
31 | /* |
32 | * Here are the standard PIO mode 0-4 timings for each "format". | |
33 | * Format-0 uses fast data reg timings, with slower command reg timings. | |
34 | * Format-1 uses fast timings for all registers, but won't work with all drives. | |
35 | */ | |
36 | static unsigned int cs5530_pio_timings[2][5] = { | |
37 | {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, | |
38 | {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010} | |
39 | }; | |
40 | ||
41 | /* | |
42 | * After chip reset, the PIO timings are set to 0x0000e132, which is not valid. | |
43 | */ | |
44 | #define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132) | |
45 | #define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20)) | |
46 | ||
47 | /** | |
88b2b32b | 48 | * cs5530_set_pio_mode - set host controller for PIO mode |
26bcb879 BZ |
49 | * @drive: drive |
50 | * @pio: PIO mode number | |
1da177e4 | 51 | * |
88b2b32b | 52 | * Handles setting of PIO mode for the chipset. |
1da177e4 | 53 | * |
26bcb879 | 54 | * The init_hwif_cs5530() routine guarantees that all drives |
1da177e4 LT |
55 | * will have valid default PIO timings set up before we get here. |
56 | */ | |
57 | ||
26bcb879 | 58 | static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio) |
1da177e4 | 59 | { |
88b2b32b BZ |
60 | unsigned long basereg = CS5530_BASEREG(drive->hwif); |
61 | unsigned int format = (inl(basereg + 4) >> 31) & 1; | |
62 | ||
63 | outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); | |
1da177e4 LT |
64 | } |
65 | ||
66 | /** | |
5fd216bb BZ |
67 | * cs5530_udma_filter - UDMA filter |
68 | * @drive: drive | |
69 | * | |
70 | * cs5530_udma_filter() does UDMA mask filtering for the given drive | |
71 | * taking into the consideration capabilities of the mate device. | |
72 | * | |
73 | * The CS5530 specifies that two drives sharing a cable cannot mix | |
74 | * UDMA/MDMA. It has to be one or the other, for the pair, though | |
75 | * different timings can still be chosen for each drive. We could | |
76 | * set the appropriate timing bits on the fly, but that might be | |
77 | * a bit confusing. So, for now we statically handle this requirement | |
78 | * by looking at our mate drive to see what it is capable of, before | |
79 | * choosing a mode for our own drive. | |
80 | * | |
81 | * Note: This relies on the fact we never fail from UDMA to MWDMA2 | |
82 | * but instead drop to PIO. | |
83 | */ | |
84 | ||
85 | static u8 cs5530_udma_filter(ide_drive_t *drive) | |
86 | { | |
87 | ide_hwif_t *hwif = drive->hwif; | |
88 | ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1]; | |
89 | struct hd_driveid *mateid = mate->id; | |
90 | u8 mask = hwif->ultra_mask; | |
91 | ||
92 | if (mate->present == 0) | |
93 | goto out; | |
94 | ||
95 | if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) { | |
96 | if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7)) | |
97 | goto out; | |
98 | if ((mateid->field_valid & 2) && (mateid->dma_mword & 7)) | |
99 | mask = 0; | |
100 | } | |
101 | out: | |
102 | return mask; | |
103 | } | |
104 | ||
88b2b32b | 105 | static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) |
3c3f5d2c | 106 | { |
5fd216bb | 107 | unsigned long basereg; |
3c3f5d2c | 108 | unsigned int reg, timings = 0; |
1da177e4 | 109 | |
1da177e4 LT |
110 | switch (mode) { |
111 | case XFER_UDMA_0: timings = 0x00921250; break; | |
112 | case XFER_UDMA_1: timings = 0x00911140; break; | |
113 | case XFER_UDMA_2: timings = 0x00911030; break; | |
114 | case XFER_MW_DMA_0: timings = 0x00077771; break; | |
115 | case XFER_MW_DMA_1: timings = 0x00012121; break; | |
116 | case XFER_MW_DMA_2: timings = 0x00002020; break; | |
1da177e4 | 117 | } |
3c3f5d2c | 118 | basereg = CS5530_BASEREG(drive->hwif); |
0ecdca26 | 119 | reg = inl(basereg + 4); /* get drive0 config register */ |
1da177e4 | 120 | timings |= reg & 0x80000000; /* preserve PIO format bit */ |
3c3f5d2c | 121 | if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */ |
0ecdca26 | 122 | outl(timings, basereg + 4); /* write drive0 config register */ |
1da177e4 LT |
123 | } else { |
124 | if (timings & 0x00100000) | |
125 | reg |= 0x00100000; /* enable UDMA timings for both drives */ | |
126 | else | |
127 | reg &= ~0x00100000; /* disable UDMA timings for both drives */ | |
0ecdca26 BZ |
128 | outl(reg, basereg + 4); /* write drive0 config register */ |
129 | outl(timings, basereg + 12); /* write drive1 config register */ | |
1da177e4 | 130 | } |
1da177e4 LT |
131 | } |
132 | ||
133 | /** | |
134 | * init_chipset_5530 - set up 5530 bridge | |
135 | * @dev: PCI device | |
136 | * @name: device name | |
137 | * | |
138 | * Initialize the cs5530 bridge for reliable IDE DMA operation. | |
139 | */ | |
140 | ||
88de8e99 | 141 | static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const char *name) |
1da177e4 LT |
142 | { |
143 | struct pci_dev *master_0 = NULL, *cs5530_0 = NULL; | |
1da177e4 | 144 | |
f7b0d2df BZ |
145 | if (pci_resource_start(dev, 4) == 0) |
146 | return -EFAULT; | |
147 | ||
1da177e4 | 148 | dev = NULL; |
652aa162 | 149 | while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) { |
1da177e4 LT |
150 | switch (dev->device) { |
151 | case PCI_DEVICE_ID_CYRIX_PCI_MASTER: | |
652aa162 | 152 | master_0 = pci_dev_get(dev); |
1da177e4 LT |
153 | break; |
154 | case PCI_DEVICE_ID_CYRIX_5530_LEGACY: | |
652aa162 | 155 | cs5530_0 = pci_dev_get(dev); |
1da177e4 LT |
156 | break; |
157 | } | |
158 | } | |
159 | if (!master_0) { | |
160 | printk(KERN_ERR "%s: unable to locate PCI MASTER function\n", name); | |
652aa162 | 161 | goto out; |
1da177e4 LT |
162 | } |
163 | if (!cs5530_0) { | |
164 | printk(KERN_ERR "%s: unable to locate CS5530 LEGACY function\n", name); | |
652aa162 | 165 | goto out; |
1da177e4 LT |
166 | } |
167 | ||
1da177e4 LT |
168 | /* |
169 | * Enable BusMaster and MemoryWriteAndInvalidate for the cs5530: | |
170 | * --> OR 0x14 into 16-bit PCI COMMAND reg of function 0 of the cs5530 | |
171 | */ | |
172 | ||
173 | pci_set_master(cs5530_0); | |
694625c0 | 174 | pci_try_set_mwi(cs5530_0); |
1da177e4 LT |
175 | |
176 | /* | |
177 | * Set PCI CacheLineSize to 16-bytes: | |
178 | * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530 | |
179 | */ | |
180 | ||
181 | pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04); | |
182 | ||
183 | /* | |
184 | * Disable trapping of UDMA register accesses (Win98 hack): | |
185 | * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530 | |
186 | */ | |
187 | ||
188 | pci_write_config_word(cs5530_0, 0xd0, 0x5006); | |
189 | ||
190 | /* | |
191 | * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus: | |
192 | * The other settings are what is necessary to get the register | |
193 | * into a sane state for IDE DMA operation. | |
194 | */ | |
195 | ||
196 | pci_write_config_byte(master_0, 0x40, 0x1e); | |
197 | ||
198 | /* | |
199 | * Set max PCI burst size (16-bytes seems to work best): | |
200 | * 16bytes: set bit-1 at 0x41 (reg value of 0x16) | |
201 | * all others: clear bit-1 at 0x41, and do: | |
202 | * 128bytes: OR 0x00 at 0x41 | |
203 | * 256bytes: OR 0x04 at 0x41 | |
204 | * 512bytes: OR 0x08 at 0x41 | |
205 | * 1024bytes: OR 0x0c at 0x41 | |
206 | */ | |
207 | ||
208 | pci_write_config_byte(master_0, 0x41, 0x14); | |
209 | ||
210 | /* | |
211 | * These settings are necessary to get the chip | |
212 | * into a sane state for IDE DMA operation. | |
213 | */ | |
214 | ||
215 | pci_write_config_byte(master_0, 0x42, 0x00); | |
216 | pci_write_config_byte(master_0, 0x43, 0xc1); | |
217 | ||
652aa162 AC |
218 | out: |
219 | pci_dev_put(master_0); | |
220 | pci_dev_put(cs5530_0); | |
1da177e4 LT |
221 | return 0; |
222 | } | |
223 | ||
224 | /** | |
225 | * init_hwif_cs5530 - initialise an IDE channel | |
226 | * @hwif: IDE to initialize | |
227 | * | |
228 | * This gets invoked by the IDE driver once for each channel. It | |
229 | * performs channel-specific pre-initialization before drive probing. | |
230 | */ | |
231 | ||
88de8e99 | 232 | static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) |
1da177e4 LT |
233 | { |
234 | unsigned long basereg; | |
235 | u32 d0_timings; | |
1da177e4 | 236 | |
26bcb879 | 237 | hwif->set_pio_mode = &cs5530_set_pio_mode; |
88b2b32b | 238 | hwif->set_dma_mode = &cs5530_set_dma_mode; |
3c3f5d2c | 239 | |
1da177e4 | 240 | basereg = CS5530_BASEREG(hwif); |
0ecdca26 | 241 | d0_timings = inl(basereg + 0); |
93104654 | 242 | if (CS5530_BAD_PIO(d0_timings)) |
0ecdca26 | 243 | outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0); |
93104654 | 244 | if (CS5530_BAD_PIO(inl(basereg + 8))) |
0ecdca26 | 245 | outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8); |
93104654 | 246 | |
f7b0d2df BZ |
247 | if (hwif->dma_base == 0) |
248 | return; | |
249 | ||
5fd216bb | 250 | hwif->udma_filter = cs5530_udma_filter; |
1da177e4 LT |
251 | } |
252 | ||
85620436 | 253 | static const struct ide_port_info cs5530_chipset __devinitdata = { |
1da177e4 LT |
254 | .name = "CS5530", |
255 | .init_chipset = init_chipset_cs5530, | |
256 | .init_hwif = init_hwif_cs5530, | |
1c51361a BZ |
257 | .host_flags = IDE_HFLAG_SERIALIZE | |
258 | IDE_HFLAG_POST_SET_MODE | | |
259 | IDE_HFLAG_BOOTABLE, | |
4099d143 | 260 | .pio_mask = ATA_PIO4, |
5f8b6c34 BZ |
261 | .mwdma_mask = ATA_MWDMA2, |
262 | .udma_mask = ATA_UDMA2, | |
1da177e4 LT |
263 | }; |
264 | ||
265 | static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |
266 | { | |
267 | return ide_setup_pci_device(dev, &cs5530_chipset); | |
268 | } | |
269 | ||
9cbcc5e3 BZ |
270 | static const struct pci_device_id cs5530_pci_tbl[] = { |
271 | { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), 0 }, | |
1da177e4 LT |
272 | { 0, }, |
273 | }; | |
274 | MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl); | |
275 | ||
276 | static struct pci_driver driver = { | |
277 | .name = "CS5530 IDE", | |
278 | .id_table = cs5530_pci_tbl, | |
279 | .probe = cs5530_init_one, | |
280 | }; | |
281 | ||
82ab1eec | 282 | static int __init cs5530_ide_init(void) |
1da177e4 LT |
283 | { |
284 | return ide_pci_register_driver(&driver); | |
285 | } | |
286 | ||
287 | module_init(cs5530_ide_init); | |
288 | ||
289 | MODULE_AUTHOR("Mark Lord"); | |
290 | MODULE_DESCRIPTION("PCI driver module for Cyrix/NS 5530 IDE"); | |
291 | MODULE_LICENSE("GPL"); |