Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
d3f20848 BP |
2 | * IDE ATAPI floppy driver. |
3 | * | |
59bca8cc BZ |
4 | * Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il> |
5 | * Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net> | |
6 | * Copyright (C) 2005 Bartlomiej Zolnierkiewicz | |
1da177e4 LT |
7 | */ |
8 | ||
9 | /* | |
1da177e4 LT |
10 | * The driver currently doesn't have any fancy features, just the bare |
11 | * minimum read/write support. | |
12 | * | |
13 | * This driver supports the following IDE floppy drives: | |
14 | * | |
15 | * LS-120/240 SuperDisk | |
16 | * Iomega Zip 100/250 | |
17 | * Iomega PC Card Clik!/PocketZip | |
18 | * | |
d3f20848 BP |
19 | * For a historical changelog see |
20 | * Documentation/ide/ChangeLog.ide-floppy.1996-2002 | |
1da177e4 LT |
21 | */ |
22 | ||
23 | #define IDEFLOPPY_VERSION "0.99.newide" | |
24 | ||
1da177e4 LT |
25 | #include <linux/module.h> |
26 | #include <linux/types.h> | |
27 | #include <linux/string.h> | |
28 | #include <linux/kernel.h> | |
29 | #include <linux/delay.h> | |
30 | #include <linux/timer.h> | |
31 | #include <linux/mm.h> | |
32 | #include <linux/interrupt.h> | |
33 | #include <linux/major.h> | |
34 | #include <linux/errno.h> | |
35 | #include <linux/genhd.h> | |
36 | #include <linux/slab.h> | |
37 | #include <linux/cdrom.h> | |
38 | #include <linux/ide.h> | |
39 | #include <linux/bitops.h> | |
cf8b8975 | 40 | #include <linux/mutex.h> |
1da177e4 | 41 | |
89636af2 BZ |
42 | #include <scsi/scsi_ioctl.h> |
43 | ||
1da177e4 | 44 | #include <asm/byteorder.h> |
7e8b163b BP |
45 | #include <linux/irq.h> |
46 | #include <linux/uaccess.h> | |
47 | #include <linux/io.h> | |
1da177e4 LT |
48 | #include <asm/unaligned.h> |
49 | ||
50 | /* | |
51 | * The following are used to debug the driver. | |
52 | */ | |
53 | #define IDEFLOPPY_DEBUG_LOG 0 | |
54 | #define IDEFLOPPY_DEBUG_INFO 0 | |
55 | #define IDEFLOPPY_DEBUG_BUGS 1 | |
56 | ||
57 | /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */ | |
58 | #define IDEFLOPPY_DEBUG( fmt, args... ) | |
59 | ||
60 | #if IDEFLOPPY_DEBUG_LOG | |
bcc77d9c BP |
61 | #define debug_log(fmt, args...) \ |
62 | printk(KERN_INFO "ide-floppy: " fmt, ## args) | |
1da177e4 LT |
63 | #else |
64 | #define debug_log(fmt, args... ) do {} while(0) | |
65 | #endif | |
66 | ||
67 | ||
68 | /* | |
69 | * Some drives require a longer irq timeout. | |
70 | */ | |
71 | #define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD) | |
72 | ||
73 | /* | |
74 | * After each failed packet command we issue a request sense command | |
75 | * and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times. | |
76 | */ | |
77 | #define IDEFLOPPY_MAX_PC_RETRIES 3 | |
78 | ||
79 | /* | |
80 | * With each packet command, we allocate a buffer of | |
81 | * IDEFLOPPY_PC_BUFFER_SIZE bytes. | |
82 | */ | |
83 | #define IDEFLOPPY_PC_BUFFER_SIZE 256 | |
84 | ||
85 | /* | |
86 | * In various places in the driver, we need to allocate storage | |
87 | * for packet commands and requests, which will remain valid while | |
88 | * we leave the driver to wait for an interrupt or a timeout event. | |
89 | */ | |
90 | #define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES) | |
91 | ||
92 | /* | |
93 | * Our view of a packet command. | |
94 | */ | |
95 | typedef struct idefloppy_packet_command_s { | |
96 | u8 c[12]; /* Actual packet bytes */ | |
97 | int retries; /* On each retry, we increment retries */ | |
98 | int error; /* Error code */ | |
99 | int request_transfer; /* Bytes to transfer */ | |
100 | int actually_transferred; /* Bytes actually transferred */ | |
101 | int buffer_size; /* Size of our data buffer */ | |
102 | int b_count; /* Missing/Available data on the current buffer */ | |
103 | struct request *rq; /* The corresponding request */ | |
104 | u8 *buffer; /* Data buffer */ | |
105 | u8 *current_position; /* Pointer into the above buffer */ | |
106 | void (*callback) (ide_drive_t *); /* Called when this packet command is completed */ | |
107 | u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */ | |
108 | unsigned long flags; /* Status/Action bit flags: long for set_bit */ | |
109 | } idefloppy_pc_t; | |
110 | ||
111 | /* | |
112 | * Packet command flag bits. | |
113 | */ | |
114 | #define PC_ABORT 0 /* Set when an error is considered normal - We won't retry */ | |
115 | #define PC_DMA_RECOMMENDED 2 /* 1 when we prefer to use DMA if possible */ | |
116 | #define PC_DMA_IN_PROGRESS 3 /* 1 while DMA in progress */ | |
117 | #define PC_DMA_ERROR 4 /* 1 when encountered problem during DMA */ | |
118 | #define PC_WRITING 5 /* Data direction */ | |
119 | ||
120 | #define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */ | |
121 | ||
1da177e4 LT |
122 | /* |
123 | * Format capacity | |
124 | */ | |
125 | typedef struct { | |
126 | u8 reserved[3]; | |
127 | u8 length; /* Length of the following descriptors in bytes */ | |
128 | } idefloppy_capacity_header_t; | |
129 | ||
130 | typedef struct { | |
131 | u32 blocks; /* Number of blocks */ | |
132 | #if defined(__LITTLE_ENDIAN_BITFIELD) | |
133 | unsigned dc :2; /* Descriptor Code */ | |
134 | unsigned reserved :6; | |
135 | #elif defined(__BIG_ENDIAN_BITFIELD) | |
136 | unsigned reserved :6; | |
137 | unsigned dc :2; /* Descriptor Code */ | |
138 | #else | |
139 | #error "Bitfield endianness not defined! Check your byteorder.h" | |
140 | #endif | |
141 | u8 length_msb; /* Block Length (MSB)*/ | |
142 | u16 length; /* Block Length */ | |
143 | } idefloppy_capacity_descriptor_t; | |
144 | ||
145 | #define CAPACITY_INVALID 0x00 | |
146 | #define CAPACITY_UNFORMATTED 0x01 | |
147 | #define CAPACITY_CURRENT 0x02 | |
148 | #define CAPACITY_NO_CARTRIDGE 0x03 | |
149 | ||
150 | /* | |
151 | * Most of our global data which we need to save even as we leave the | |
152 | * driver due to an interrupt or a timer event is stored in a variable | |
153 | * of type idefloppy_floppy_t, defined below. | |
154 | */ | |
155 | typedef struct ide_floppy_obj { | |
156 | ide_drive_t *drive; | |
157 | ide_driver_t *driver; | |
158 | struct gendisk *disk; | |
159 | struct kref kref; | |
c94964a4 | 160 | unsigned int openers; /* protected by BKL for now */ |
1da177e4 LT |
161 | |
162 | /* Current packet command */ | |
163 | idefloppy_pc_t *pc; | |
164 | /* Last failed packet command */ | |
165 | idefloppy_pc_t *failed_pc; | |
166 | /* Packet command stack */ | |
167 | idefloppy_pc_t pc_stack[IDEFLOPPY_PC_STACK]; | |
168 | /* Next free packet command storage space */ | |
169 | int pc_stack_index; | |
170 | struct request rq_stack[IDEFLOPPY_PC_STACK]; | |
171 | /* We implement a circular array */ | |
172 | int rq_stack_index; | |
173 | ||
174 | /* | |
175 | * Last error information | |
176 | */ | |
177 | u8 sense_key, asc, ascq; | |
178 | /* delay this long before sending packet command */ | |
179 | u8 ticks; | |
180 | int progress_indication; | |
181 | ||
182 | /* | |
183 | * Device information | |
184 | */ | |
185 | /* Current format */ | |
186 | int blocks, block_size, bs_factor; | |
187 | /* Last format capacity */ | |
188 | idefloppy_capacity_descriptor_t capacity; | |
189 | /* Copy of the flexible disk page */ | |
8e81bbba | 190 | u8 flexible_disk_page[32]; |
1da177e4 LT |
191 | /* Write protect */ |
192 | int wp; | |
193 | /* Supports format progress report */ | |
194 | int srfp; | |
195 | /* Status/Action flags */ | |
196 | unsigned long flags; | |
197 | } idefloppy_floppy_t; | |
198 | ||
c40d3d38 | 199 | #define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */ |
1da177e4 LT |
200 | |
201 | /* | |
202 | * Floppy flag bits values. | |
203 | */ | |
204 | #define IDEFLOPPY_DRQ_INTERRUPT 0 /* DRQ interrupt device */ | |
205 | #define IDEFLOPPY_MEDIA_CHANGED 1 /* Media may have changed */ | |
206 | #define IDEFLOPPY_USE_READ12 2 /* Use READ12/WRITE12 or READ10/WRITE10 */ | |
207 | #define IDEFLOPPY_FORMAT_IN_PROGRESS 3 /* Format in progress */ | |
208 | #define IDEFLOPPY_CLIK_DRIVE 4 /* Avoid commands not supported in Clik drive */ | |
209 | #define IDEFLOPPY_ZIP_DRIVE 5 /* Requires BH algorithm for packets */ | |
210 | ||
1da177e4 LT |
211 | /* |
212 | * Defines for the mode sense command | |
213 | */ | |
214 | #define MODE_SENSE_CURRENT 0x00 | |
215 | #define MODE_SENSE_CHANGEABLE 0x01 | |
216 | #define MODE_SENSE_DEFAULT 0x02 | |
217 | #define MODE_SENSE_SAVED 0x03 | |
218 | ||
219 | /* | |
220 | * IOCTLs used in low-level formatting. | |
221 | */ | |
222 | ||
223 | #define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600 | |
224 | #define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601 | |
225 | #define IDEFLOPPY_IOCTL_FORMAT_START 0x4602 | |
226 | #define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603 | |
227 | ||
1da177e4 LT |
228 | /* |
229 | * Error codes which are returned in rq->errors to the higher part | |
230 | * of the driver. | |
231 | */ | |
232 | #define IDEFLOPPY_ERROR_GENERAL 101 | |
233 | ||
234 | /* | |
235 | * The following is used to format the general configuration word of | |
236 | * the ATAPI IDENTIFY DEVICE command. | |
237 | */ | |
238 | struct idefloppy_id_gcw { | |
239 | #if defined(__LITTLE_ENDIAN_BITFIELD) | |
240 | unsigned packet_size :2; /* Packet Size */ | |
241 | unsigned reserved234 :3; /* Reserved */ | |
242 | unsigned drq_type :2; /* Command packet DRQ type */ | |
243 | unsigned removable :1; /* Removable media */ | |
244 | unsigned device_type :5; /* Device type */ | |
245 | unsigned reserved13 :1; /* Reserved */ | |
246 | unsigned protocol :2; /* Protocol type */ | |
247 | #elif defined(__BIG_ENDIAN_BITFIELD) | |
248 | unsigned protocol :2; /* Protocol type */ | |
249 | unsigned reserved13 :1; /* Reserved */ | |
250 | unsigned device_type :5; /* Device type */ | |
251 | unsigned removable :1; /* Removable media */ | |
252 | unsigned drq_type :2; /* Command packet DRQ type */ | |
253 | unsigned reserved234 :3; /* Reserved */ | |
254 | unsigned packet_size :2; /* Packet Size */ | |
255 | #else | |
256 | #error "Bitfield endianness not defined! Check your byteorder.h" | |
257 | #endif | |
258 | }; | |
259 | ||
1da177e4 | 260 | /* |
948391d1 BP |
261 | * Pages of the SELECT SENSE / MODE SENSE packet commands. |
262 | * See SFF-8070i spec. | |
1da177e4 LT |
263 | */ |
264 | #define IDEFLOPPY_CAPABILITIES_PAGE 0x1b | |
265 | #define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05 | |
266 | ||
cf8b8975 | 267 | static DEFINE_MUTEX(idefloppy_ref_mutex); |
1da177e4 LT |
268 | |
269 | #define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref) | |
270 | ||
271 | #define ide_floppy_g(disk) \ | |
272 | container_of((disk)->private_data, struct ide_floppy_obj, driver) | |
273 | ||
274 | static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk) | |
275 | { | |
276 | struct ide_floppy_obj *floppy = NULL; | |
277 | ||
cf8b8975 | 278 | mutex_lock(&idefloppy_ref_mutex); |
1da177e4 LT |
279 | floppy = ide_floppy_g(disk); |
280 | if (floppy) | |
281 | kref_get(&floppy->kref); | |
cf8b8975 | 282 | mutex_unlock(&idefloppy_ref_mutex); |
1da177e4 LT |
283 | return floppy; |
284 | } | |
285 | ||
9a24b63d | 286 | static void idefloppy_cleanup_obj(struct kref *); |
1da177e4 LT |
287 | |
288 | static void ide_floppy_put(struct ide_floppy_obj *floppy) | |
289 | { | |
cf8b8975 | 290 | mutex_lock(&idefloppy_ref_mutex); |
9a24b63d | 291 | kref_put(&floppy->kref, idefloppy_cleanup_obj); |
cf8b8975 | 292 | mutex_unlock(&idefloppy_ref_mutex); |
1da177e4 LT |
293 | } |
294 | ||
295 | /* | |
296 | * Too bad. The drive wants to send us data which we are not ready to accept. | |
297 | * Just throw it away. | |
298 | */ | |
299 | static void idefloppy_discard_data (ide_drive_t *drive, unsigned int bcount) | |
300 | { | |
301 | while (bcount--) | |
302 | (void) HWIF(drive)->INB(IDE_DATA_REG); | |
303 | } | |
304 | ||
305 | #if IDEFLOPPY_DEBUG_BUGS | |
306 | static void idefloppy_write_zeros (ide_drive_t *drive, unsigned int bcount) | |
307 | { | |
308 | while (bcount--) | |
309 | HWIF(drive)->OUTB(0, IDE_DATA_REG); | |
310 | } | |
311 | #endif /* IDEFLOPPY_DEBUG_BUGS */ | |
312 | ||
313 | ||
314 | /* | |
315 | * idefloppy_do_end_request is used to finish servicing a request. | |
316 | * | |
317 | * For read/write requests, we will call ide_end_request to pass to the | |
318 | * next buffer. | |
319 | */ | |
320 | static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) | |
321 | { | |
322 | idefloppy_floppy_t *floppy = drive->driver_data; | |
323 | struct request *rq = HWGROUP(drive)->rq; | |
324 | int error; | |
325 | ||
bcc77d9c | 326 | debug_log("Reached %s\n", __func__); |
1da177e4 LT |
327 | |
328 | switch (uptodate) { | |
329 | case 0: error = IDEFLOPPY_ERROR_GENERAL; break; | |
330 | case 1: error = 0; break; | |
331 | default: error = uptodate; | |
332 | } | |
333 | if (error) | |
334 | floppy->failed_pc = NULL; | |
335 | /* Why does this happen? */ | |
336 | if (!rq) | |
337 | return 0; | |
4aff5e23 | 338 | if (!blk_special_request(rq)) { |
1da177e4 LT |
339 | /* our real local end request function */ |
340 | ide_end_request(drive, uptodate, nsecs); | |
341 | return 0; | |
342 | } | |
343 | rq->errors = error; | |
344 | /* fixme: need to move this local also */ | |
345 | ide_end_drive_cmd(drive, 0, 0); | |
346 | return 0; | |
347 | } | |
348 | ||
349 | static void idefloppy_input_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount) | |
350 | { | |
351 | struct request *rq = pc->rq; | |
352 | struct bio_vec *bvec; | |
5705f702 | 353 | struct req_iterator iter; |
1da177e4 LT |
354 | unsigned long flags; |
355 | char *data; | |
5705f702 | 356 | int count, done = 0; |
1da177e4 | 357 | |
5705f702 | 358 | rq_for_each_segment(bvec, rq, iter) { |
6c92e699 JA |
359 | if (!bcount) |
360 | break; | |
1da177e4 | 361 | |
6c92e699 | 362 | count = min(bvec->bv_len, bcount); |
1da177e4 | 363 | |
6c92e699 JA |
364 | data = bvec_kmap_irq(bvec, &flags); |
365 | drive->hwif->atapi_input_bytes(drive, data, count); | |
366 | bvec_kunmap_irq(data, &flags); | |
1da177e4 | 367 | |
6c92e699 JA |
368 | bcount -= count; |
369 | pc->b_count += count; | |
370 | done += count; | |
1da177e4 LT |
371 | } |
372 | ||
373 | idefloppy_do_end_request(drive, 1, done >> 9); | |
374 | ||
375 | if (bcount) { | |
376 | printk(KERN_ERR "%s: leftover data in idefloppy_input_buffers, bcount == %d\n", drive->name, bcount); | |
377 | idefloppy_discard_data(drive, bcount); | |
378 | } | |
379 | } | |
380 | ||
381 | static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount) | |
382 | { | |
383 | struct request *rq = pc->rq; | |
5705f702 | 384 | struct req_iterator iter; |
1da177e4 LT |
385 | struct bio_vec *bvec; |
386 | unsigned long flags; | |
5705f702 | 387 | int count, done = 0; |
1da177e4 LT |
388 | char *data; |
389 | ||
5705f702 | 390 | rq_for_each_segment(bvec, rq, iter) { |
6c92e699 JA |
391 | if (!bcount) |
392 | break; | |
1da177e4 | 393 | |
6c92e699 | 394 | count = min(bvec->bv_len, bcount); |
1da177e4 | 395 | |
6c92e699 JA |
396 | data = bvec_kmap_irq(bvec, &flags); |
397 | drive->hwif->atapi_output_bytes(drive, data, count); | |
398 | bvec_kunmap_irq(data, &flags); | |
1da177e4 | 399 | |
6c92e699 JA |
400 | bcount -= count; |
401 | pc->b_count += count; | |
402 | done += count; | |
1da177e4 LT |
403 | } |
404 | ||
405 | idefloppy_do_end_request(drive, 1, done >> 9); | |
406 | ||
c7ea4b31 | 407 | #if IDEFLOPPY_DEBUG_BUGS |
1da177e4 LT |
408 | if (bcount) { |
409 | printk(KERN_ERR "%s: leftover data in idefloppy_output_buffers, bcount == %d\n", drive->name, bcount); | |
410 | idefloppy_write_zeros(drive, bcount); | |
411 | } | |
c7ea4b31 | 412 | #endif |
1da177e4 LT |
413 | } |
414 | ||
415 | static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc) | |
416 | { | |
417 | struct request *rq = pc->rq; | |
418 | struct bio *bio = rq->bio; | |
419 | ||
420 | while ((bio = rq->bio) != NULL) | |
421 | idefloppy_do_end_request(drive, 1, 0); | |
422 | } | |
423 | ||
424 | /* | |
425 | * idefloppy_queue_pc_head generates a new packet command request in front | |
426 | * of the request queue, before the current request, so that it will be | |
427 | * processed immediately, on the next pass through the driver. | |
428 | */ | |
429 | static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struct request *rq) | |
430 | { | |
431 | struct ide_floppy_obj *floppy = drive->driver_data; | |
432 | ||
433 | ide_init_drive_cmd(rq); | |
434 | rq->buffer = (char *) pc; | |
4aff5e23 | 435 | rq->cmd_type = REQ_TYPE_SPECIAL; |
1da177e4 LT |
436 | rq->rq_disk = floppy->disk; |
437 | (void) ide_do_drive_cmd(drive, rq, ide_preempt); | |
438 | } | |
439 | ||
440 | static idefloppy_pc_t *idefloppy_next_pc_storage (ide_drive_t *drive) | |
441 | { | |
442 | idefloppy_floppy_t *floppy = drive->driver_data; | |
443 | ||
444 | if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK) | |
445 | floppy->pc_stack_index=0; | |
446 | return (&floppy->pc_stack[floppy->pc_stack_index++]); | |
447 | } | |
448 | ||
449 | static struct request *idefloppy_next_rq_storage (ide_drive_t *drive) | |
450 | { | |
451 | idefloppy_floppy_t *floppy = drive->driver_data; | |
452 | ||
453 | if (floppy->rq_stack_index == IDEFLOPPY_PC_STACK) | |
454 | floppy->rq_stack_index = 0; | |
455 | return (&floppy->rq_stack[floppy->rq_stack_index++]); | |
456 | } | |
457 | ||
a6ff2d3b | 458 | static void idefloppy_request_sense_callback(ide_drive_t *drive) |
1da177e4 LT |
459 | { |
460 | idefloppy_floppy_t *floppy = drive->driver_data; | |
a6ff2d3b | 461 | u8 *buf = floppy->pc->buffer; |
1da177e4 | 462 | |
bcc77d9c BP |
463 | debug_log("Reached %s\n", __func__); |
464 | ||
1da177e4 | 465 | if (!floppy->pc->error) { |
a6ff2d3b BP |
466 | floppy->sense_key = buf[2] & 0x0F; |
467 | floppy->asc = buf[12]; | |
468 | floppy->ascq = buf[13]; | |
469 | floppy->progress_indication = buf[15] & 0x80 ? | |
470 | (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; | |
471 | ||
472 | if (floppy->failed_pc) | |
473 | debug_log("pc = %x, sense key = %x, asc = %x," | |
474 | " ascq = %x\n", | |
475 | floppy->failed_pc->c[0], | |
476 | floppy->sense_key, | |
477 | floppy->asc, | |
478 | floppy->ascq); | |
479 | else | |
480 | debug_log("sense key = %x, asc = %x, ascq = %x\n", | |
481 | floppy->sense_key, | |
482 | floppy->asc, | |
483 | floppy->ascq); | |
484 | ||
485 | ||
1da177e4 LT |
486 | idefloppy_do_end_request(drive, 1, 0); |
487 | } else { | |
a6ff2d3b BP |
488 | printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting" |
489 | " request!\n"); | |
1da177e4 LT |
490 | idefloppy_do_end_request(drive, 0, 0); |
491 | } | |
492 | } | |
493 | ||
494 | /* | |
495 | * General packet command callback function. | |
496 | */ | |
497 | static void idefloppy_pc_callback (ide_drive_t *drive) | |
498 | { | |
499 | idefloppy_floppy_t *floppy = drive->driver_data; | |
bcc77d9c BP |
500 | |
501 | debug_log("Reached %s\n", __func__); | |
1da177e4 LT |
502 | |
503 | idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0); | |
504 | } | |
505 | ||
506 | /* | |
507 | * idefloppy_init_pc initializes a packet command. | |
508 | */ | |
509 | static void idefloppy_init_pc (idefloppy_pc_t *pc) | |
510 | { | |
511 | memset(pc->c, 0, 12); | |
512 | pc->retries = 0; | |
513 | pc->flags = 0; | |
514 | pc->request_transfer = 0; | |
515 | pc->buffer = pc->pc_buffer; | |
516 | pc->buffer_size = IDEFLOPPY_PC_BUFFER_SIZE; | |
517 | pc->callback = &idefloppy_pc_callback; | |
518 | } | |
519 | ||
520 | static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc) | |
521 | { | |
30d67099 BP |
522 | idefloppy_init_pc(pc); |
523 | pc->c[0] = GPCMD_REQUEST_SENSE; | |
1da177e4 LT |
524 | pc->c[4] = 255; |
525 | pc->request_transfer = 18; | |
526 | pc->callback = &idefloppy_request_sense_callback; | |
527 | } | |
528 | ||
529 | /* | |
530 | * idefloppy_retry_pc is called when an error was detected during the | |
531 | * last packet command. We queue a request sense packet command in | |
532 | * the head of the request list. | |
533 | */ | |
534 | static void idefloppy_retry_pc (ide_drive_t *drive) | |
535 | { | |
536 | idefloppy_pc_t *pc; | |
537 | struct request *rq; | |
1da177e4 | 538 | |
0e38a66a | 539 | (void)drive->hwif->INB(IDE_ERROR_REG); |
1da177e4 LT |
540 | pc = idefloppy_next_pc_storage(drive); |
541 | rq = idefloppy_next_rq_storage(drive); | |
542 | idefloppy_create_request_sense_cmd(pc); | |
543 | idefloppy_queue_pc_head(drive, pc, rq); | |
544 | } | |
545 | ||
546 | /* | |
547 | * idefloppy_pc_intr is the usual interrupt handler which will be called | |
548 | * during a packet command. | |
549 | */ | |
550 | static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) | |
551 | { | |
552 | idefloppy_floppy_t *floppy = drive->driver_data; | |
790d1239 | 553 | ide_hwif_t *hwif = drive->hwif; |
1da177e4 LT |
554 | idefloppy_pc_t *pc = floppy->pc; |
555 | struct request *rq = pc->rq; | |
556 | unsigned int temp; | |
790d1239 | 557 | u16 bcount; |
8e7657ae | 558 | u8 stat, ireason; |
1da177e4 | 559 | |
bcc77d9c | 560 | debug_log("Reached %s interrupt handler\n", __func__); |
1da177e4 LT |
561 | |
562 | if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { | |
563 | if (HWIF(drive)->ide_dma_end(drive)) { | |
564 | set_bit(PC_DMA_ERROR, &pc->flags); | |
565 | } else { | |
566 | pc->actually_transferred = pc->request_transfer; | |
567 | idefloppy_update_buffers(drive, pc); | |
568 | } | |
bcc77d9c | 569 | debug_log("DMA finished\n"); |
1da177e4 LT |
570 | } |
571 | ||
572 | /* Clear the interrupt */ | |
22c525b9 | 573 | stat = drive->hwif->INB(IDE_STATUS_REG); |
1da177e4 | 574 | |
22c525b9 | 575 | if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ |
bcc77d9c BP |
576 | debug_log("Packet command completed, %d bytes transferred\n", |
577 | pc->actually_transferred); | |
1da177e4 LT |
578 | clear_bit(PC_DMA_IN_PROGRESS, &pc->flags); |
579 | ||
366c7f55 | 580 | local_irq_enable_in_hardirq(); |
1da177e4 | 581 | |
22c525b9 | 582 | if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { |
1da177e4 | 583 | /* Error detected */ |
bcc77d9c | 584 | debug_log("%s: I/O error\n", drive->name); |
1da177e4 | 585 | rq->errors++; |
30d67099 | 586 | if (pc->c[0] == GPCMD_REQUEST_SENSE) { |
1da177e4 LT |
587 | printk(KERN_ERR "ide-floppy: I/O error in " |
588 | "request sense command\n"); | |
589 | return ide_do_reset(drive); | |
590 | } | |
591 | /* Retry operation */ | |
592 | idefloppy_retry_pc(drive); | |
593 | /* queued, but not started */ | |
594 | return ide_stopped; | |
595 | } | |
596 | pc->error = 0; | |
597 | if (floppy->failed_pc == pc) | |
598 | floppy->failed_pc = NULL; | |
599 | /* Command finished - Call the callback function */ | |
600 | pc->callback(drive); | |
601 | return ide_stopped; | |
602 | } | |
603 | ||
604 | if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { | |
605 | printk(KERN_ERR "ide-floppy: The floppy wants to issue " | |
606 | "more interrupts in DMA mode\n"); | |
7469aaf6 | 607 | ide_dma_off(drive); |
1da177e4 LT |
608 | return ide_do_reset(drive); |
609 | } | |
610 | ||
611 | /* Get the number of bytes to transfer */ | |
790d1239 BZ |
612 | bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) | |
613 | hwif->INB(IDE_BCOUNTL_REG); | |
1da177e4 | 614 | /* on this interrupt */ |
8e7657ae | 615 | ireason = hwif->INB(IDE_IREASON_REG); |
1da177e4 | 616 | |
8e7657ae | 617 | if (ireason & CD) { |
1da177e4 LT |
618 | printk(KERN_ERR "ide-floppy: CoD != 0 in idefloppy_pc_intr\n"); |
619 | return ide_do_reset(drive); | |
620 | } | |
8e7657ae | 621 | if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) { |
1da177e4 LT |
622 | /* Hopefully, we will never get here */ |
623 | printk(KERN_ERR "ide-floppy: We wanted to %s, ", | |
8e7657ae | 624 | (ireason & IO) ? "Write" : "Read"); |
1da177e4 | 625 | printk(KERN_ERR "but the floppy wants us to %s !\n", |
8e7657ae | 626 | (ireason & IO) ? "Read" : "Write"); |
1da177e4 LT |
627 | return ide_do_reset(drive); |
628 | } | |
629 | if (!test_bit(PC_WRITING, &pc->flags)) { | |
630 | /* Reading - Check that we have enough space */ | |
790d1239 | 631 | temp = pc->actually_transferred + bcount; |
1da177e4 LT |
632 | if (temp > pc->request_transfer) { |
633 | if (temp > pc->buffer_size) { | |
634 | printk(KERN_ERR "ide-floppy: The floppy wants " | |
635 | "to send us more data than expected " | |
636 | "- discarding data\n"); | |
790d1239 | 637 | idefloppy_discard_data(drive, bcount); |
0078df2e | 638 | |
1da177e4 LT |
639 | ide_set_handler(drive, |
640 | &idefloppy_pc_intr, | |
641 | IDEFLOPPY_WAIT_CMD, | |
642 | NULL); | |
643 | return ide_started; | |
644 | } | |
bcc77d9c BP |
645 | debug_log("The floppy wants to send us more data than" |
646 | " expected - allowing transfer\n"); | |
1da177e4 LT |
647 | } |
648 | } | |
649 | if (test_bit(PC_WRITING, &pc->flags)) { | |
650 | if (pc->buffer != NULL) | |
651 | /* Write the current buffer */ | |
790d1239 BZ |
652 | hwif->atapi_output_bytes(drive, pc->current_position, |
653 | bcount); | |
1da177e4 | 654 | else |
790d1239 | 655 | idefloppy_output_buffers(drive, pc, bcount); |
1da177e4 LT |
656 | } else { |
657 | if (pc->buffer != NULL) | |
658 | /* Read the current buffer */ | |
790d1239 BZ |
659 | hwif->atapi_input_bytes(drive, pc->current_position, |
660 | bcount); | |
1da177e4 | 661 | else |
790d1239 | 662 | idefloppy_input_buffers(drive, pc, bcount); |
1da177e4 LT |
663 | } |
664 | /* Update the current position */ | |
790d1239 BZ |
665 | pc->actually_transferred += bcount; |
666 | pc->current_position += bcount; | |
1da177e4 | 667 | |
1da177e4 LT |
668 | ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* And set the interrupt handler again */ |
669 | return ide_started; | |
670 | } | |
671 | ||
672 | /* | |
673 | * This is the original routine that did the packet transfer. | |
674 | * It fails at high speeds on the Iomega ZIP drive, so there's a slower version | |
675 | * for that drive below. The algorithm is chosen based on drive type | |
676 | */ | |
677 | static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive) | |
678 | { | |
679 | ide_startstop_t startstop; | |
680 | idefloppy_floppy_t *floppy = drive->driver_data; | |
8e7657ae | 681 | u8 ireason; |
1da177e4 LT |
682 | |
683 | if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { | |
684 | printk(KERN_ERR "ide-floppy: Strange, packet command " | |
685 | "initiated yet DRQ isn't asserted\n"); | |
686 | return startstop; | |
687 | } | |
8e7657ae BZ |
688 | ireason = drive->hwif->INB(IDE_IREASON_REG); |
689 | if ((ireason & CD) == 0 || (ireason & IO)) { | |
1da177e4 LT |
690 | printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while " |
691 | "issuing a packet command\n"); | |
692 | return ide_do_reset(drive); | |
693 | } | |
0078df2e | 694 | |
1da177e4 LT |
695 | /* Set the interrupt routine */ |
696 | ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); | |
697 | /* Send the actual packet */ | |
698 | HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12); | |
699 | return ide_started; | |
700 | } | |
701 | ||
702 | ||
703 | /* | |
704 | * What we have here is a classic case of a top half / bottom half | |
705 | * interrupt service routine. In interrupt mode, the device sends | |
706 | * an interrupt to signal it's ready to receive a packet. However, | |
707 | * we need to delay about 2-3 ticks before issuing the packet or we | |
708 | * gets in trouble. | |
709 | * | |
710 | * So, follow carefully. transfer_pc1 is called as an interrupt (or | |
711 | * directly). In either case, when the device says it's ready for a | |
712 | * packet, we schedule the packet transfer to occur about 2-3 ticks | |
713 | * later in transfer_pc2. | |
714 | */ | |
715 | static int idefloppy_transfer_pc2 (ide_drive_t *drive) | |
716 | { | |
717 | idefloppy_floppy_t *floppy = drive->driver_data; | |
718 | ||
719 | /* Send the actual packet */ | |
720 | HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12); | |
721 | /* Timeout for the packet command */ | |
722 | return IDEFLOPPY_WAIT_CMD; | |
723 | } | |
724 | ||
725 | static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) | |
726 | { | |
727 | idefloppy_floppy_t *floppy = drive->driver_data; | |
728 | ide_startstop_t startstop; | |
8e7657ae | 729 | u8 ireason; |
1da177e4 LT |
730 | |
731 | if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { | |
732 | printk(KERN_ERR "ide-floppy: Strange, packet command " | |
733 | "initiated yet DRQ isn't asserted\n"); | |
734 | return startstop; | |
735 | } | |
8e7657ae BZ |
736 | ireason = drive->hwif->INB(IDE_IREASON_REG); |
737 | if ((ireason & CD) == 0 || (ireason & IO)) { | |
1da177e4 LT |
738 | printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) " |
739 | "while issuing a packet command\n"); | |
740 | return ide_do_reset(drive); | |
741 | } | |
742 | /* | |
743 | * The following delay solves a problem with ATAPI Zip 100 drives | |
744 | * where the Busy flag was apparently being deasserted before the | |
745 | * unit was ready to receive data. This was happening on a | |
746 | * 1200 MHz Athlon system. 10/26/01 25msec is too short, | |
747 | * 40 and 50msec work well. idefloppy_pc_intr will not be actually | |
748 | * used until after the packet is moved in about 50 msec. | |
749 | */ | |
0078df2e | 750 | |
1da177e4 LT |
751 | ide_set_handler(drive, |
752 | &idefloppy_pc_intr, /* service routine for packet command */ | |
753 | floppy->ticks, /* wait this long before "failing" */ | |
754 | &idefloppy_transfer_pc2); /* fail == transfer_pc2 */ | |
755 | return ide_started; | |
756 | } | |
757 | ||
758 | /** | |
759 | * idefloppy_should_report_error() | |
760 | * | |
761 | * Supresses error messages resulting from Medium not present | |
762 | */ | |
763 | static inline int idefloppy_should_report_error(idefloppy_floppy_t *floppy) | |
764 | { | |
765 | if (floppy->sense_key == 0x02 && | |
766 | floppy->asc == 0x3a && | |
767 | floppy->ascq == 0x00) | |
768 | return 0; | |
769 | return 1; | |
770 | } | |
771 | ||
772 | /* | |
773 | * Issue a packet command | |
774 | */ | |
775 | static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *pc) | |
776 | { | |
777 | idefloppy_floppy_t *floppy = drive->driver_data; | |
778 | ide_hwif_t *hwif = drive->hwif; | |
1da177e4 | 779 | ide_handler_t *pkt_xfer_routine; |
790d1239 | 780 | u16 bcount; |
e5f9f5a8 | 781 | u8 dma; |
1da177e4 | 782 | |
1da177e4 | 783 | if (floppy->failed_pc == NULL && |
30d67099 | 784 | pc->c[0] != GPCMD_REQUEST_SENSE) |
1da177e4 LT |
785 | floppy->failed_pc = pc; |
786 | /* Set the current packet command */ | |
787 | floppy->pc = pc; | |
788 | ||
789 | if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES || | |
790 | test_bit(PC_ABORT, &pc->flags)) { | |
791 | /* | |
792 | * We will "abort" retrying a packet command in case | |
793 | * a legitimate error code was received. | |
794 | */ | |
795 | if (!test_bit(PC_ABORT, &pc->flags)) { | |
796 | if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) { | |
797 | if (idefloppy_should_report_error(floppy)) | |
798 | printk(KERN_ERR "ide-floppy: %s: I/O error, " | |
799 | "pc = %2x, key = %2x, " | |
800 | "asc = %2x, ascq = %2x\n", | |
801 | drive->name, pc->c[0], | |
802 | floppy->sense_key, | |
803 | floppy->asc, floppy->ascq); | |
804 | } | |
805 | /* Giving up */ | |
806 | pc->error = IDEFLOPPY_ERROR_GENERAL; | |
807 | } | |
808 | floppy->failed_pc = NULL; | |
809 | pc->callback(drive); | |
810 | return ide_stopped; | |
811 | } | |
812 | ||
bcc77d9c | 813 | debug_log("Retry number - %d\n", pc->retries); |
1da177e4 LT |
814 | |
815 | pc->retries++; | |
816 | /* We haven't transferred any data yet */ | |
817 | pc->actually_transferred = 0; | |
818 | pc->current_position = pc->buffer; | |
790d1239 | 819 | bcount = min(pc->request_transfer, 63 * 1024); |
1da177e4 | 820 | |
7469aaf6 BZ |
821 | if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) |
822 | ide_dma_off(drive); | |
823 | ||
e5f9f5a8 | 824 | dma = 0; |
1da177e4 LT |
825 | |
826 | if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma) | |
e5f9f5a8 | 827 | dma = !hwif->dma_setup(drive); |
1da177e4 | 828 | |
2fc57388 BZ |
829 | ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | |
830 | IDE_TFLAG_OUT_DEVICE, bcount, dma); | |
1da177e4 | 831 | |
e5f9f5a8 | 832 | if (dma) { /* Begin DMA, if necessary */ |
1da177e4 LT |
833 | set_bit(PC_DMA_IN_PROGRESS, &pc->flags); |
834 | hwif->dma_start(drive); | |
835 | } | |
836 | ||
837 | /* Can we transfer the packet when we get the interrupt or wait? */ | |
838 | if (test_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags)) { | |
839 | /* wait */ | |
840 | pkt_xfer_routine = &idefloppy_transfer_pc1; | |
841 | } else { | |
842 | /* immediate */ | |
843 | pkt_xfer_routine = &idefloppy_transfer_pc; | |
844 | } | |
845 | ||
846 | if (test_bit (IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags)) { | |
847 | /* Issue the packet command */ | |
848 | ide_execute_command(drive, WIN_PACKETCMD, | |
849 | pkt_xfer_routine, | |
850 | IDEFLOPPY_WAIT_CMD, | |
851 | NULL); | |
852 | return ide_started; | |
853 | } else { | |
854 | /* Issue the packet command */ | |
855 | HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); | |
856 | return (*pkt_xfer_routine) (drive); | |
857 | } | |
858 | } | |
859 | ||
860 | static void idefloppy_rw_callback (ide_drive_t *drive) | |
861 | { | |
bcc77d9c | 862 | debug_log("Reached %s\n", __func__); |
1da177e4 LT |
863 | |
864 | idefloppy_do_end_request(drive, 1, 0); | |
865 | return; | |
866 | } | |
867 | ||
868 | static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent) | |
869 | { | |
bcc77d9c | 870 | debug_log("creating prevent removal command, prevent = %d\n", prevent); |
1da177e4 LT |
871 | |
872 | idefloppy_init_pc(pc); | |
30d67099 | 873 | pc->c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL; |
1da177e4 LT |
874 | pc->c[4] = prevent; |
875 | } | |
876 | ||
877 | static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t *pc) | |
878 | { | |
879 | idefloppy_init_pc(pc); | |
30d67099 | 880 | pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES; |
1da177e4 LT |
881 | pc->c[7] = 255; |
882 | pc->c[8] = 255; | |
883 | pc->request_transfer = 255; | |
884 | } | |
885 | ||
886 | static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l, | |
887 | int flags) | |
888 | { | |
889 | idefloppy_init_pc(pc); | |
30d67099 | 890 | pc->c[0] = GPCMD_FORMAT_UNIT; |
1da177e4 LT |
891 | pc->c[1] = 0x17; |
892 | ||
893 | memset(pc->buffer, 0, 12); | |
894 | pc->buffer[1] = 0xA2; | |
895 | /* Default format list header, u8 1: FOV/DCRT/IMM bits set */ | |
896 | ||
897 | if (flags & 1) /* Verify bit on... */ | |
898 | pc->buffer[1] ^= 0x20; /* ... turn off DCRT bit */ | |
899 | pc->buffer[3] = 8; | |
900 | ||
8f622430 BP |
901 | put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4])); |
902 | put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8])); | |
1da177e4 LT |
903 | pc->buffer_size=12; |
904 | set_bit(PC_WRITING, &pc->flags); | |
905 | } | |
906 | ||
907 | /* | |
908 | * A mode sense command is used to "sense" floppy parameters. | |
909 | */ | |
910 | static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u8 type) | |
911 | { | |
24a5d703 | 912 | u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */ |
1da177e4 LT |
913 | |
914 | idefloppy_init_pc(pc); | |
30d67099 | 915 | pc->c[0] = GPCMD_MODE_SENSE_10; |
1da177e4 LT |
916 | pc->c[1] = 0; |
917 | pc->c[2] = page_code + (type << 6); | |
918 | ||
919 | switch (page_code) { | |
920 | case IDEFLOPPY_CAPABILITIES_PAGE: | |
921 | length += 12; | |
922 | break; | |
923 | case IDEFLOPPY_FLEXIBLE_DISK_PAGE: | |
924 | length += 32; | |
925 | break; | |
926 | default: | |
927 | printk(KERN_ERR "ide-floppy: unsupported page code " | |
928 | "in create_mode_sense_cmd\n"); | |
929 | } | |
8f622430 | 930 | put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]); |
1da177e4 LT |
931 | pc->request_transfer = length; |
932 | } | |
933 | ||
934 | static void idefloppy_create_start_stop_cmd (idefloppy_pc_t *pc, int start) | |
935 | { | |
936 | idefloppy_init_pc(pc); | |
30d67099 | 937 | pc->c[0] = GPCMD_START_STOP_UNIT; |
1da177e4 LT |
938 | pc->c[4] = start; |
939 | } | |
940 | ||
941 | static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc) | |
942 | { | |
943 | idefloppy_init_pc(pc); | |
30d67099 | 944 | pc->c[0] = GPCMD_TEST_UNIT_READY; |
1da177e4 LT |
945 | } |
946 | ||
947 | static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq, unsigned long sector) | |
948 | { | |
949 | int block = sector / floppy->bs_factor; | |
950 | int blocks = rq->nr_sectors / floppy->bs_factor; | |
951 | int cmd = rq_data_dir(rq); | |
952 | ||
953 | debug_log("create_rw1%d_cmd: block == %d, blocks == %d\n", | |
954 | 2 * test_bit (IDEFLOPPY_USE_READ12, &floppy->flags), | |
955 | block, blocks); | |
956 | ||
957 | idefloppy_init_pc(pc); | |
958 | if (test_bit(IDEFLOPPY_USE_READ12, &floppy->flags)) { | |
30d67099 | 959 | pc->c[0] = cmd == READ ? GPCMD_READ_12 : GPCMD_WRITE_12; |
8f622430 | 960 | put_unaligned(cpu_to_be32(blocks), (unsigned int *) &pc->c[6]); |
1da177e4 | 961 | } else { |
30d67099 | 962 | pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; |
8f622430 | 963 | put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); |
1da177e4 | 964 | } |
8f622430 | 965 | put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); |
1da177e4 LT |
966 | pc->callback = &idefloppy_rw_callback; |
967 | pc->rq = rq; | |
968 | pc->b_count = cmd == READ ? 0 : rq->bio->bi_size; | |
4aff5e23 | 969 | if (rq->cmd_flags & REQ_RW) |
1da177e4 LT |
970 | set_bit(PC_WRITING, &pc->flags); |
971 | pc->buffer = NULL; | |
972 | pc->request_transfer = pc->buffer_size = blocks * floppy->block_size; | |
973 | set_bit(PC_DMA_RECOMMENDED, &pc->flags); | |
974 | } | |
975 | ||
3d6392cf | 976 | static void |
1da177e4 LT |
977 | idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq) |
978 | { | |
1da177e4 | 979 | idefloppy_init_pc(pc); |
3d6392cf | 980 | pc->callback = &idefloppy_rw_callback; |
1da177e4 | 981 | memcpy(pc->c, rq->cmd, sizeof(pc->c)); |
3d6392cf JA |
982 | pc->rq = rq; |
983 | pc->b_count = rq->data_len; | |
984 | if (rq->data_len && rq_data_dir(rq) == WRITE) | |
985 | set_bit(PC_WRITING, &pc->flags); | |
986 | pc->buffer = rq->data; | |
987 | if (rq->bio) | |
988 | set_bit(PC_DMA_RECOMMENDED, &pc->flags); | |
989 | ||
990 | /* | |
991 | * possibly problematic, doesn't look like ide-floppy correctly | |
992 | * handled scattered requests if dma fails... | |
993 | */ | |
994 | pc->request_transfer = pc->buffer_size = rq->data_len; | |
1da177e4 LT |
995 | } |
996 | ||
997 | /* | |
998 | * idefloppy_do_request is our request handling function. | |
999 | */ | |
1000 | static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request *rq, sector_t block_s) | |
1001 | { | |
1002 | idefloppy_floppy_t *floppy = drive->driver_data; | |
1003 | idefloppy_pc_t *pc; | |
1004 | unsigned long block = (unsigned long)block_s; | |
1005 | ||
bcc77d9c | 1006 | debug_log("dev: %s, cmd_type: %x, errors: %d\n", |
18cddac3 | 1007 | rq->rq_disk ? rq->rq_disk->disk_name : "?", |
bcc77d9c BP |
1008 | rq->cmd_type, rq->errors); |
1009 | debug_log("sector: %ld, nr_sectors: %ld, " | |
1da177e4 LT |
1010 | "current_nr_sectors: %d\n", (long)rq->sector, |
1011 | rq->nr_sectors, rq->current_nr_sectors); | |
1012 | ||
1013 | if (rq->errors >= ERROR_MAX) { | |
1014 | if (floppy->failed_pc != NULL) { | |
1015 | if (idefloppy_should_report_error(floppy)) | |
1016 | printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x," | |
1017 | " key = %2x, asc = %2x, ascq = %2x\n", | |
1018 | drive->name, floppy->failed_pc->c[0], | |
1019 | floppy->sense_key, floppy->asc, floppy->ascq); | |
1020 | } | |
1021 | else | |
1022 | printk(KERN_ERR "ide-floppy: %s: I/O error\n", | |
1023 | drive->name); | |
1024 | idefloppy_do_end_request(drive, 0, 0); | |
1025 | return ide_stopped; | |
1026 | } | |
4aff5e23 | 1027 | if (blk_fs_request(rq)) { |
1da177e4 LT |
1028 | if (((long)rq->sector % floppy->bs_factor) || |
1029 | (rq->nr_sectors % floppy->bs_factor)) { | |
1030 | printk("%s: unsupported r/w request size\n", | |
1031 | drive->name); | |
1032 | idefloppy_do_end_request(drive, 0, 0); | |
1033 | return ide_stopped; | |
1034 | } | |
1035 | pc = idefloppy_next_pc_storage(drive); | |
1036 | idefloppy_create_rw_cmd(floppy, pc, rq, block); | |
4aff5e23 | 1037 | } else if (blk_special_request(rq)) { |
1da177e4 | 1038 | pc = (idefloppy_pc_t *) rq->buffer; |
4aff5e23 | 1039 | } else if (blk_pc_request(rq)) { |
1da177e4 | 1040 | pc = idefloppy_next_pc_storage(drive); |
3d6392cf | 1041 | idefloppy_blockpc_cmd(floppy, pc, rq); |
1da177e4 LT |
1042 | } else { |
1043 | blk_dump_rq_flags(rq, | |
1044 | "ide-floppy: unsupported command in queue"); | |
1045 | idefloppy_do_end_request(drive, 0, 0); | |
1046 | return ide_stopped; | |
1047 | } | |
1048 | ||
1049 | pc->rq = rq; | |
1050 | return idefloppy_issue_pc(drive, pc); | |
1051 | } | |
1052 | ||
1053 | /* | |
1054 | * idefloppy_queue_pc_tail adds a special packet command request to the | |
1055 | * tail of the request queue, and waits for it to be serviced. | |
1056 | */ | |
1057 | static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc) | |
1058 | { | |
1059 | struct ide_floppy_obj *floppy = drive->driver_data; | |
1060 | struct request rq; | |
1061 | ||
1062 | ide_init_drive_cmd (&rq); | |
1063 | rq.buffer = (char *) pc; | |
4aff5e23 | 1064 | rq.cmd_type = REQ_TYPE_SPECIAL; |
1da177e4 LT |
1065 | rq.rq_disk = floppy->disk; |
1066 | ||
1067 | return ide_do_drive_cmd(drive, &rq, ide_wait); | |
1068 | } | |
1069 | ||
1070 | /* | |
8e81bbba BP |
1071 | * Look at the flexible disk page parameters. We ignore the CHS capacity |
1072 | * parameters and use the LBA parameters instead. | |
1da177e4 | 1073 | */ |
8e81bbba | 1074 | static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) |
1da177e4 LT |
1075 | { |
1076 | idefloppy_floppy_t *floppy = drive->driver_data; | |
1077 | idefloppy_pc_t pc; | |
8e81bbba | 1078 | u8 *page; |
1da177e4 | 1079 | int capacity, lba_capacity; |
8e81bbba BP |
1080 | u16 transfer_rate, sector_size, cyls, rpm; |
1081 | u8 heads, sectors; | |
1da177e4 | 1082 | |
8e81bbba BP |
1083 | idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, |
1084 | MODE_SENSE_CURRENT); | |
1085 | ||
1086 | if (idefloppy_queue_pc_tail(drive, &pc)) { | |
1087 | printk(KERN_ERR "ide-floppy: Can't get flexible disk page" | |
1088 | " parameters\n"); | |
1da177e4 LT |
1089 | return 1; |
1090 | } | |
24a5d703 | 1091 | floppy->wp = !!(pc.buffer[3] & 0x80); |
1da177e4 | 1092 | set_disk_ro(floppy->disk, floppy->wp); |
8e81bbba BP |
1093 | page = &pc.buffer[8]; |
1094 | ||
1095 | transfer_rate = be16_to_cpu(*(u16 *)&pc.buffer[8 + 2]); | |
1096 | sector_size = be16_to_cpu(*(u16 *)&pc.buffer[8 + 6]); | |
1097 | cyls = be16_to_cpu(*(u16 *)&pc.buffer[8 + 8]); | |
1098 | rpm = be16_to_cpu(*(u16 *)&pc.buffer[8 + 28]); | |
1099 | heads = pc.buffer[8 + 4]; | |
1100 | sectors = pc.buffer[8 + 5]; | |
1101 | ||
1102 | capacity = cyls * heads * sectors * sector_size; | |
1103 | ||
1104 | if (memcmp(page, &floppy->flexible_disk_page, 32)) | |
1da177e4 LT |
1105 | printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, " |
1106 | "%d sector size, %d rpm\n", | |
8e81bbba BP |
1107 | drive->name, capacity / 1024, cyls, heads, |
1108 | sectors, transfer_rate / 8, sector_size, rpm); | |
1109 | ||
1110 | memcpy(&floppy->flexible_disk_page, page, 32); | |
1111 | drive->bios_cyl = cyls; | |
1112 | drive->bios_head = heads; | |
1113 | drive->bios_sect = sectors; | |
1da177e4 | 1114 | lba_capacity = floppy->blocks * floppy->block_size; |
8e81bbba | 1115 | |
1da177e4 LT |
1116 | if (capacity < lba_capacity) { |
1117 | printk(KERN_NOTICE "%s: The disk reports a capacity of %d " | |
1118 | "bytes, but the drive only handles %d\n", | |
1119 | drive->name, lba_capacity, capacity); | |
8e81bbba BP |
1120 | floppy->blocks = floppy->block_size ? |
1121 | capacity / floppy->block_size : 0; | |
1da177e4 LT |
1122 | } |
1123 | return 0; | |
1124 | } | |
1125 | ||
948391d1 | 1126 | static int idefloppy_get_sfrp_bit(ide_drive_t *drive) |
1da177e4 LT |
1127 | { |
1128 | idefloppy_floppy_t *floppy = drive->driver_data; | |
1129 | idefloppy_pc_t pc; | |
1da177e4 LT |
1130 | |
1131 | floppy->srfp = 0; | |
1132 | idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE, | |
1133 | MODE_SENSE_CURRENT); | |
1134 | ||
1135 | set_bit(PC_SUPPRESS_ERROR, &pc.flags); | |
948391d1 | 1136 | if (idefloppy_queue_pc_tail(drive, &pc)) |
1da177e4 | 1137 | return 1; |
1da177e4 | 1138 | |
948391d1 | 1139 | floppy->srfp = pc.buffer[8 + 2] & 0x40; |
1da177e4 LT |
1140 | return (0); |
1141 | } | |
1142 | ||
1143 | /* | |
1144 | * Determine if a media is present in the floppy drive, and if so, | |
1145 | * its LBA capacity. | |
1146 | */ | |
1147 | static int idefloppy_get_capacity (ide_drive_t *drive) | |
1148 | { | |
1149 | idefloppy_floppy_t *floppy = drive->driver_data; | |
1150 | idefloppy_pc_t pc; | |
1151 | idefloppy_capacity_header_t *header; | |
1152 | idefloppy_capacity_descriptor_t *descriptor; | |
1153 | int i, descriptors, rc = 1, blocks, length; | |
1154 | ||
1155 | drive->bios_cyl = 0; | |
1156 | drive->bios_head = drive->bios_sect = 0; | |
fdb77da4 AC |
1157 | floppy->blocks = 0; |
1158 | floppy->bs_factor = 1; | |
1da177e4 LT |
1159 | set_capacity(floppy->disk, 0); |
1160 | ||
1161 | idefloppy_create_read_capacity_cmd(&pc); | |
1162 | if (idefloppy_queue_pc_tail(drive, &pc)) { | |
1163 | printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); | |
1164 | return 1; | |
1165 | } | |
1166 | header = (idefloppy_capacity_header_t *) pc.buffer; | |
1167 | descriptors = header->length / sizeof(idefloppy_capacity_descriptor_t); | |
1168 | descriptor = (idefloppy_capacity_descriptor_t *) (header + 1); | |
1169 | ||
1170 | for (i = 0; i < descriptors; i++, descriptor++) { | |
8f622430 BP |
1171 | blocks = descriptor->blocks = be32_to_cpu(descriptor->blocks); |
1172 | length = descriptor->length = be16_to_cpu(descriptor->length); | |
1da177e4 LT |
1173 | |
1174 | if (!i) | |
1175 | { | |
1176 | switch (descriptor->dc) { | |
1177 | /* Clik! drive returns this instead of CAPACITY_CURRENT */ | |
1178 | case CAPACITY_UNFORMATTED: | |
1179 | if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) | |
1180 | /* | |
1181 | * If it is not a clik drive, break out | |
1182 | * (maintains previous driver behaviour) | |
1183 | */ | |
1184 | break; | |
1185 | case CAPACITY_CURRENT: | |
1186 | /* Normal Zip/LS-120 disks */ | |
1187 | if (memcmp(descriptor, &floppy->capacity, sizeof (idefloppy_capacity_descriptor_t))) | |
1188 | printk(KERN_INFO "%s: %dkB, %d blocks, %d " | |
1189 | "sector size\n", drive->name, | |
1190 | blocks * length / 1024, blocks, length); | |
1191 | floppy->capacity = *descriptor; | |
1192 | if (!length || length % 512) { | |
1193 | printk(KERN_NOTICE "%s: %d bytes block size " | |
1194 | "not supported\n", drive->name, length); | |
1195 | } else { | |
1196 | floppy->blocks = blocks; | |
1197 | floppy->block_size = length; | |
1198 | if ((floppy->bs_factor = length / 512) != 1) | |
1199 | printk(KERN_NOTICE "%s: warning: non " | |
1200 | "512 bytes block size not " | |
1201 | "fully supported\n", | |
1202 | drive->name); | |
1203 | rc = 0; | |
1204 | } | |
1205 | break; | |
1206 | case CAPACITY_NO_CARTRIDGE: | |
1207 | /* | |
1208 | * This is a KERN_ERR so it appears on screen | |
1209 | * for the user to see | |
1210 | */ | |
1211 | printk(KERN_ERR "%s: No disk in drive\n", drive->name); | |
1212 | break; | |
1213 | case CAPACITY_INVALID: | |
1214 | printk(KERN_ERR "%s: Invalid capacity for disk " | |
1215 | "in drive\n", drive->name); | |
1216 | break; | |
1217 | } | |
1218 | } | |
1219 | if (!i) { | |
bcc77d9c | 1220 | debug_log("Descriptor 0 Code: %d\n", descriptor->dc); |
1da177e4 | 1221 | } |
bcc77d9c BP |
1222 | debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", |
1223 | i, blocks * length / 1024, blocks, length); | |
1da177e4 LT |
1224 | } |
1225 | ||
1226 | /* Clik! disk does not support get_flexible_disk_page */ | |
1227 | if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { | |
8e81bbba | 1228 | (void) ide_floppy_get_flexible_disk_page(drive); |
1da177e4 LT |
1229 | } |
1230 | ||
1231 | set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor); | |
1232 | return rc; | |
1233 | } | |
1234 | ||
1235 | /* | |
1236 | ** Obtain the list of formattable capacities. | |
1237 | ** Very similar to idefloppy_get_capacity, except that we push the capacity | |
1238 | ** descriptors to userland, instead of our own structures. | |
1239 | ** | |
1240 | ** Userland gives us the following structure: | |
1241 | ** | |
1242 | ** struct idefloppy_format_capacities { | |
1243 | ** int nformats; | |
1244 | ** struct { | |
1245 | ** int nblocks; | |
1246 | ** int blocksize; | |
1247 | ** } formats[]; | |
1248 | ** } ; | |
1249 | ** | |
1250 | ** userland initializes nformats to the number of allocated formats[] | |
1251 | ** records. On exit we set nformats to the number of records we've | |
1252 | ** actually initialized. | |
1253 | ** | |
1254 | */ | |
1255 | ||
1256 | static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) | |
1257 | { | |
1258 | idefloppy_pc_t pc; | |
1259 | idefloppy_capacity_header_t *header; | |
1260 | idefloppy_capacity_descriptor_t *descriptor; | |
1261 | int i, descriptors, blocks, length; | |
1262 | int u_array_size; | |
1263 | int u_index; | |
1264 | int __user *argp; | |
1265 | ||
1266 | if (get_user(u_array_size, arg)) | |
1267 | return (-EFAULT); | |
1268 | ||
1269 | if (u_array_size <= 0) | |
1270 | return (-EINVAL); | |
1271 | ||
1272 | idefloppy_create_read_capacity_cmd(&pc); | |
1273 | if (idefloppy_queue_pc_tail(drive, &pc)) { | |
1274 | printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); | |
1275 | return (-EIO); | |
1276 | } | |
1277 | header = (idefloppy_capacity_header_t *) pc.buffer; | |
1278 | descriptors = header->length / | |
1279 | sizeof(idefloppy_capacity_descriptor_t); | |
1280 | descriptor = (idefloppy_capacity_descriptor_t *) (header + 1); | |
1281 | ||
1282 | u_index = 0; | |
1283 | argp = arg + 1; | |
1284 | ||
1285 | /* | |
1286 | ** We always skip the first capacity descriptor. That's the | |
1287 | ** current capacity. We are interested in the remaining descriptors, | |
1288 | ** the formattable capacities. | |
1289 | */ | |
1290 | ||
1291 | for (i=0; i<descriptors; i++, descriptor++) { | |
1292 | if (u_index >= u_array_size) | |
1293 | break; /* User-supplied buffer too small */ | |
1294 | if (i == 0) | |
1295 | continue; /* Skip the first descriptor */ | |
1296 | ||
8f622430 BP |
1297 | blocks = be32_to_cpu(descriptor->blocks); |
1298 | length = be16_to_cpu(descriptor->length); | |
1da177e4 LT |
1299 | |
1300 | if (put_user(blocks, argp)) | |
1301 | return(-EFAULT); | |
1302 | ++argp; | |
1303 | ||
1304 | if (put_user(length, argp)) | |
1305 | return (-EFAULT); | |
1306 | ++argp; | |
1307 | ||
1308 | ++u_index; | |
1309 | } | |
1310 | ||
1311 | if (put_user(u_index, arg)) | |
1312 | return (-EFAULT); | |
1313 | return (0); | |
1314 | } | |
1315 | ||
1316 | /* | |
1317 | ** Send ATAPI_FORMAT_UNIT to the drive. | |
1318 | ** | |
1319 | ** Userland gives us the following structure: | |
1320 | ** | |
1321 | ** struct idefloppy_format_command { | |
1322 | ** int nblocks; | |
1323 | ** int blocksize; | |
1324 | ** int flags; | |
1325 | ** } ; | |
1326 | ** | |
1327 | ** flags is a bitmask, currently, the only defined flag is: | |
1328 | ** | |
1329 | ** 0x01 - verify media after format. | |
1330 | */ | |
1331 | ||
1332 | static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg) | |
1333 | { | |
1334 | int blocks; | |
1335 | int length; | |
1336 | int flags; | |
1337 | idefloppy_pc_t pc; | |
1338 | ||
1339 | if (get_user(blocks, arg) || | |
1340 | get_user(length, arg+1) || | |
1341 | get_user(flags, arg+2)) { | |
1342 | return (-EFAULT); | |
1343 | } | |
1344 | ||
948391d1 | 1345 | (void) idefloppy_get_sfrp_bit(drive); |
1da177e4 LT |
1346 | idefloppy_create_format_unit_cmd(&pc, blocks, length, flags); |
1347 | if (idefloppy_queue_pc_tail(drive, &pc)) { | |
1348 | return (-EIO); | |
1349 | } | |
1350 | ||
1351 | return (0); | |
1352 | } | |
1353 | ||
1354 | /* | |
1355 | ** Get ATAPI_FORMAT_UNIT progress indication. | |
1356 | ** | |
0779bf2d | 1357 | ** Userland gives a pointer to an int. The int is set to a progress |
1da177e4 LT |
1358 | ** indicator 0-65536, with 65536=100%. |
1359 | ** | |
1360 | ** If the drive does not support format progress indication, we just check | |
1361 | ** the dsc bit, and return either 0 or 65536. | |
1362 | */ | |
1363 | ||
1364 | static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) | |
1365 | { | |
1366 | idefloppy_floppy_t *floppy = drive->driver_data; | |
1367 | idefloppy_pc_t pc; | |
1368 | int progress_indication = 0x10000; | |
1369 | ||
1370 | if (floppy->srfp) { | |
1371 | idefloppy_create_request_sense_cmd(&pc); | |
1372 | if (idefloppy_queue_pc_tail(drive, &pc)) { | |
1373 | return (-EIO); | |
1374 | } | |
1375 | ||
1376 | if (floppy->sense_key == 2 && | |
1377 | floppy->asc == 4 && | |
1378 | floppy->ascq == 4) { | |
1379 | progress_indication = floppy->progress_indication; | |
1380 | } | |
1381 | /* Else assume format_unit has finished, and we're | |
1382 | ** at 0x10000 */ | |
1383 | } else { | |
1da177e4 | 1384 | unsigned long flags; |
22c525b9 | 1385 | u8 stat; |
1da177e4 LT |
1386 | |
1387 | local_irq_save(flags); | |
22c525b9 | 1388 | stat = drive->hwif->INB(IDE_STATUS_REG); |
1da177e4 LT |
1389 | local_irq_restore(flags); |
1390 | ||
22c525b9 | 1391 | progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000; |
1da177e4 LT |
1392 | } |
1393 | if (put_user(progress_indication, arg)) | |
1394 | return (-EFAULT); | |
1395 | ||
1396 | return (0); | |
1397 | } | |
1398 | ||
1399 | /* | |
1400 | * Return the current floppy capacity. | |
1401 | */ | |
1402 | static sector_t idefloppy_capacity (ide_drive_t *drive) | |
1403 | { | |
1404 | idefloppy_floppy_t *floppy = drive->driver_data; | |
1405 | unsigned long capacity = floppy->blocks * floppy->bs_factor; | |
1406 | ||
1407 | return capacity; | |
1408 | } | |
1409 | ||
1410 | /* | |
1411 | * idefloppy_identify_device checks if we can support a drive, | |
1412 | * based on the ATAPI IDENTIFY command results. | |
1413 | */ | |
1414 | static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id) | |
1415 | { | |
1416 | struct idefloppy_id_gcw gcw; | |
1417 | #if IDEFLOPPY_DEBUG_INFO | |
1da177e4 LT |
1418 | char buffer[80]; |
1419 | #endif /* IDEFLOPPY_DEBUG_INFO */ | |
1420 | ||
1421 | *((u16 *) &gcw) = id->config; | |
1422 | ||
1423 | #ifdef CONFIG_PPC | |
1424 | /* kludge for Apple PowerBook internal zip */ | |
1425 | if ((gcw.device_type == 5) && | |
1426 | !strstr(id->model, "CD-ROM") && | |
1427 | strstr(id->model, "ZIP")) | |
1428 | gcw.device_type = 0; | |
1429 | #endif | |
1430 | ||
1431 | #if IDEFLOPPY_DEBUG_INFO | |
1432 | printk(KERN_INFO "Dumping ATAPI Identify Device floppy parameters\n"); | |
1433 | switch (gcw.protocol) { | |
1434 | case 0: case 1: sprintf(buffer, "ATA");break; | |
1435 | case 2: sprintf(buffer, "ATAPI");break; | |
1436 | case 3: sprintf(buffer, "Reserved (Unknown to ide-floppy)");break; | |
1437 | } | |
1438 | printk(KERN_INFO "Protocol Type: %s\n", buffer); | |
1439 | switch (gcw.device_type) { | |
1440 | case 0: sprintf(buffer, "Direct-access Device");break; | |
1441 | case 1: sprintf(buffer, "Streaming Tape Device");break; | |
1442 | case 2: case 3: case 4: sprintf (buffer, "Reserved");break; | |
1443 | case 5: sprintf(buffer, "CD-ROM Device");break; | |
1444 | case 6: sprintf(buffer, "Reserved"); | |
1445 | case 7: sprintf(buffer, "Optical memory Device");break; | |
1446 | case 0x1f: sprintf(buffer, "Unknown or no Device type");break; | |
1447 | default: sprintf(buffer, "Reserved"); | |
1448 | } | |
1449 | printk(KERN_INFO "Device Type: %x - %s\n", gcw.device_type, buffer); | |
1450 | printk(KERN_INFO "Removable: %s\n",gcw.removable ? "Yes":"No"); | |
1451 | switch (gcw.drq_type) { | |
1452 | case 0: sprintf(buffer, "Microprocessor DRQ");break; | |
1453 | case 1: sprintf(buffer, "Interrupt DRQ");break; | |
1454 | case 2: sprintf(buffer, "Accelerated DRQ");break; | |
1455 | case 3: sprintf(buffer, "Reserved");break; | |
1456 | } | |
1457 | printk(KERN_INFO "Command Packet DRQ Type: %s\n", buffer); | |
1458 | switch (gcw.packet_size) { | |
1459 | case 0: sprintf(buffer, "12 bytes");break; | |
1460 | case 1: sprintf(buffer, "16 bytes");break; | |
1461 | default: sprintf(buffer, "Reserved");break; | |
1462 | } | |
1463 | printk(KERN_INFO "Command Packet Size: %s\n", buffer); | |
1da177e4 LT |
1464 | #endif /* IDEFLOPPY_DEBUG_INFO */ |
1465 | ||
1466 | if (gcw.protocol != 2) | |
1467 | printk(KERN_ERR "ide-floppy: Protocol is not ATAPI\n"); | |
1468 | else if (gcw.device_type != 0) | |
1469 | printk(KERN_ERR "ide-floppy: Device type is not set to floppy\n"); | |
1470 | else if (!gcw.removable) | |
1471 | printk(KERN_ERR "ide-floppy: The removable flag is not set\n"); | |
1472 | else if (gcw.drq_type == 3) { | |
1473 | printk(KERN_ERR "ide-floppy: Sorry, DRQ type %d not supported\n", gcw.drq_type); | |
1474 | } else if (gcw.packet_size != 0) { | |
1475 | printk(KERN_ERR "ide-floppy: Packet size is not 12 bytes long\n"); | |
1476 | } else | |
1477 | return 1; | |
1478 | return 0; | |
1479 | } | |
1480 | ||
7662d046 | 1481 | #ifdef CONFIG_IDE_PROC_FS |
1da177e4 LT |
1482 | static void idefloppy_add_settings(ide_drive_t *drive) |
1483 | { | |
1484 | idefloppy_floppy_t *floppy = drive->driver_data; | |
1485 | ||
1486 | /* | |
1497943e | 1487 | * drive setting name read/write data type min max mul_factor div_factor data pointer set function |
1da177e4 | 1488 | */ |
1497943e BZ |
1489 | ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); |
1490 | ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); | |
1491 | ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); | |
1492 | ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &floppy->ticks, NULL); | |
1da177e4 | 1493 | } |
7662d046 BZ |
1494 | #else |
1495 | static inline void idefloppy_add_settings(ide_drive_t *drive) { ; } | |
1496 | #endif | |
1da177e4 LT |
1497 | |
1498 | /* | |
1499 | * Driver initialization. | |
1500 | */ | |
1501 | static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) | |
1502 | { | |
1503 | struct idefloppy_id_gcw gcw; | |
1504 | ||
1505 | *((u16 *) &gcw) = drive->id->config; | |
1506 | floppy->pc = floppy->pc_stack; | |
1507 | if (gcw.drq_type == 1) | |
1508 | set_bit(IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags); | |
1509 | /* | |
1510 | * We used to check revisions here. At this point however | |
1511 | * I'm giving up. Just assume they are all broken, its easier. | |
1512 | * | |
1513 | * The actual reason for the workarounds was likely | |
1514 | * a driver bug after all rather than a firmware bug, | |
1515 | * and the workaround below used to hide it. It should | |
1516 | * be fixed as of version 1.9, but to be on the safe side | |
1517 | * we'll leave the limitation below for the 2.2.x tree. | |
1518 | */ | |
1519 | ||
1520 | if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) { | |
1521 | set_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags); | |
1522 | /* This value will be visible in the /proc/ide/hdx/settings */ | |
1523 | floppy->ticks = IDEFLOPPY_TICKS_DELAY; | |
1524 | blk_queue_max_sectors(drive->queue, 64); | |
1525 | } | |
1526 | ||
1527 | /* | |
1528 | * Guess what? The IOMEGA Clik! drive also needs the | |
1529 | * above fix. It makes nasty clicking noises without | |
1530 | * it, so please don't remove this. | |
1531 | */ | |
1532 | if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) { | |
1533 | blk_queue_max_sectors(drive->queue, 64); | |
1534 | set_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags); | |
1535 | } | |
1536 | ||
1537 | ||
1538 | (void) idefloppy_get_capacity(drive); | |
1539 | idefloppy_add_settings(drive); | |
1540 | } | |
1541 | ||
4031bbe4 | 1542 | static void ide_floppy_remove(ide_drive_t *drive) |
1da177e4 LT |
1543 | { |
1544 | idefloppy_floppy_t *floppy = drive->driver_data; | |
1545 | struct gendisk *g = floppy->disk; | |
1546 | ||
7662d046 | 1547 | ide_proc_unregister_driver(drive, floppy->driver); |
1da177e4 LT |
1548 | |
1549 | del_gendisk(g); | |
1550 | ||
1551 | ide_floppy_put(floppy); | |
1da177e4 LT |
1552 | } |
1553 | ||
9a24b63d | 1554 | static void idefloppy_cleanup_obj(struct kref *kref) |
1da177e4 LT |
1555 | { |
1556 | struct ide_floppy_obj *floppy = to_ide_floppy(kref); | |
1557 | ide_drive_t *drive = floppy->drive; | |
1558 | struct gendisk *g = floppy->disk; | |
1559 | ||
1560 | drive->driver_data = NULL; | |
1561 | g->private_data = NULL; | |
1562 | put_disk(g); | |
1563 | kfree(floppy); | |
1564 | } | |
1565 | ||
ecfd80e4 | 1566 | #ifdef CONFIG_IDE_PROC_FS |
1da177e4 LT |
1567 | static int proc_idefloppy_read_capacity |
1568 | (char *page, char **start, off_t off, int count, int *eof, void *data) | |
1569 | { | |
1570 | ide_drive_t*drive = (ide_drive_t *)data; | |
1571 | int len; | |
1572 | ||
1573 | len = sprintf(page,"%llu\n", (long long)idefloppy_capacity(drive)); | |
1574 | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | |
1575 | } | |
1576 | ||
1577 | static ide_proc_entry_t idefloppy_proc[] = { | |
1578 | { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, | |
1579 | { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, | |
1580 | { NULL, 0, NULL, NULL } | |
1581 | }; | |
ecfd80e4 | 1582 | #endif /* CONFIG_IDE_PROC_FS */ |
1da177e4 | 1583 | |
4031bbe4 | 1584 | static int ide_floppy_probe(ide_drive_t *); |
1da177e4 | 1585 | |
1da177e4 | 1586 | static ide_driver_t idefloppy_driver = { |
8604affd | 1587 | .gen_driver = { |
4ef3b8f4 | 1588 | .owner = THIS_MODULE, |
8604affd BZ |
1589 | .name = "ide-floppy", |
1590 | .bus = &ide_bus_type, | |
8604affd | 1591 | }, |
4031bbe4 RK |
1592 | .probe = ide_floppy_probe, |
1593 | .remove = ide_floppy_remove, | |
1da177e4 LT |
1594 | .version = IDEFLOPPY_VERSION, |
1595 | .media = ide_floppy, | |
1da177e4 | 1596 | .supports_dsc_overlap = 0, |
1da177e4 LT |
1597 | .do_request = idefloppy_do_request, |
1598 | .end_request = idefloppy_do_end_request, | |
1599 | .error = __ide_error, | |
1600 | .abort = __ide_abort, | |
7662d046 | 1601 | #ifdef CONFIG_IDE_PROC_FS |
1da177e4 | 1602 | .proc = idefloppy_proc, |
7662d046 | 1603 | #endif |
1da177e4 LT |
1604 | }; |
1605 | ||
1606 | static int idefloppy_open(struct inode *inode, struct file *filp) | |
1607 | { | |
1608 | struct gendisk *disk = inode->i_bdev->bd_disk; | |
1609 | struct ide_floppy_obj *floppy; | |
1610 | ide_drive_t *drive; | |
1611 | idefloppy_pc_t pc; | |
1612 | int ret = 0; | |
1613 | ||
bcc77d9c | 1614 | debug_log("Reached %s\n", __func__); |
1da177e4 LT |
1615 | |
1616 | if (!(floppy = ide_floppy_get(disk))) | |
1617 | return -ENXIO; | |
1618 | ||
1619 | drive = floppy->drive; | |
1620 | ||
c94964a4 | 1621 | floppy->openers++; |
1da177e4 | 1622 | |
c94964a4 | 1623 | if (floppy->openers == 1) { |
1da177e4 LT |
1624 | clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); |
1625 | /* Just in case */ | |
1626 | ||
1627 | idefloppy_create_test_unit_ready_cmd(&pc); | |
1628 | if (idefloppy_queue_pc_tail(drive, &pc)) { | |
1629 | idefloppy_create_start_stop_cmd(&pc, 1); | |
1630 | (void) idefloppy_queue_pc_tail(drive, &pc); | |
1631 | } | |
1632 | ||
1633 | if (idefloppy_get_capacity (drive) | |
1634 | && (filp->f_flags & O_NDELAY) == 0 | |
1635 | /* | |
1636 | ** Allow O_NDELAY to open a drive without a disk, or with | |
1637 | ** an unreadable disk, so that we can get the format | |
1638 | ** capacity of the drive or begin the format - Sam | |
1639 | */ | |
1640 | ) { | |
1da177e4 LT |
1641 | ret = -EIO; |
1642 | goto out_put_floppy; | |
1643 | } | |
1644 | ||
1645 | if (floppy->wp && (filp->f_mode & 2)) { | |
1da177e4 LT |
1646 | ret = -EROFS; |
1647 | goto out_put_floppy; | |
1648 | } | |
1649 | set_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags); | |
1650 | /* IOMEGA Clik! drives do not support lock/unlock commands */ | |
1651 | if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { | |
1652 | idefloppy_create_prevent_cmd(&pc, 1); | |
1653 | (void) idefloppy_queue_pc_tail(drive, &pc); | |
1654 | } | |
1655 | check_disk_change(inode->i_bdev); | |
1656 | } else if (test_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags)) { | |
1da177e4 LT |
1657 | ret = -EBUSY; |
1658 | goto out_put_floppy; | |
1659 | } | |
1660 | return 0; | |
1661 | ||
1662 | out_put_floppy: | |
c94964a4 | 1663 | floppy->openers--; |
1da177e4 LT |
1664 | ide_floppy_put(floppy); |
1665 | return ret; | |
1666 | } | |
1667 | ||
1668 | static int idefloppy_release(struct inode *inode, struct file *filp) | |
1669 | { | |
1670 | struct gendisk *disk = inode->i_bdev->bd_disk; | |
1671 | struct ide_floppy_obj *floppy = ide_floppy_g(disk); | |
1672 | ide_drive_t *drive = floppy->drive; | |
1673 | idefloppy_pc_t pc; | |
bcc77d9c BP |
1674 | |
1675 | debug_log("Reached %s\n", __func__); | |
1da177e4 | 1676 | |
c94964a4 | 1677 | if (floppy->openers == 1) { |
1da177e4 LT |
1678 | /* IOMEGA Clik! drives do not support lock/unlock commands */ |
1679 | if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { | |
1680 | idefloppy_create_prevent_cmd(&pc, 0); | |
1681 | (void) idefloppy_queue_pc_tail(drive, &pc); | |
1682 | } | |
1683 | ||
1684 | clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); | |
1685 | } | |
c94964a4 BZ |
1686 | |
1687 | floppy->openers--; | |
1da177e4 LT |
1688 | |
1689 | ide_floppy_put(floppy); | |
1690 | ||
1691 | return 0; | |
1692 | } | |
1693 | ||
a885c8c4 CH |
1694 | static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo) |
1695 | { | |
1696 | struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); | |
1697 | ide_drive_t *drive = floppy->drive; | |
1698 | ||
1699 | geo->heads = drive->bios_head; | |
1700 | geo->sectors = drive->bios_sect; | |
1701 | geo->cylinders = (u16)drive->bios_cyl; /* truncate */ | |
1702 | return 0; | |
1703 | } | |
1704 | ||
1da177e4 LT |
1705 | static int idefloppy_ioctl(struct inode *inode, struct file *file, |
1706 | unsigned int cmd, unsigned long arg) | |
1707 | { | |
1708 | struct block_device *bdev = inode->i_bdev; | |
1709 | struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); | |
1710 | ide_drive_t *drive = floppy->drive; | |
1711 | void __user *argp = (void __user *)arg; | |
07203f64 | 1712 | int err; |
1da177e4 LT |
1713 | int prevent = (arg) ? 1 : 0; |
1714 | idefloppy_pc_t pc; | |
1da177e4 LT |
1715 | |
1716 | switch (cmd) { | |
1717 | case CDROMEJECT: | |
1718 | prevent = 0; | |
1719 | /* fall through */ | |
1720 | case CDROM_LOCKDOOR: | |
c94964a4 | 1721 | if (floppy->openers > 1) |
1da177e4 LT |
1722 | return -EBUSY; |
1723 | ||
1724 | /* The IOMEGA Clik! Drive doesn't support this command - no room for an eject mechanism */ | |
1725 | if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { | |
1726 | idefloppy_create_prevent_cmd(&pc, prevent); | |
1727 | (void) idefloppy_queue_pc_tail(drive, &pc); | |
1728 | } | |
1729 | if (cmd == CDROMEJECT) { | |
1730 | idefloppy_create_start_stop_cmd(&pc, 2); | |
1731 | (void) idefloppy_queue_pc_tail(drive, &pc); | |
1732 | } | |
1733 | return 0; | |
1734 | case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED: | |
1735 | return 0; | |
1736 | case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY: | |
1737 | return idefloppy_get_format_capacities(drive, argp); | |
1738 | case IDEFLOPPY_IOCTL_FORMAT_START: | |
1739 | ||
1740 | if (!(file->f_mode & 2)) | |
1741 | return -EPERM; | |
1742 | ||
c94964a4 | 1743 | if (floppy->openers > 1) { |
1da177e4 LT |
1744 | /* Don't format if someone is using the disk */ |
1745 | ||
1746 | clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, | |
1747 | &floppy->flags); | |
1748 | return -EBUSY; | |
1749 | } | |
1750 | ||
1751 | set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); | |
1752 | ||
1753 | err = idefloppy_begin_format(drive, argp); | |
1754 | if (err) | |
1755 | clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); | |
1756 | return err; | |
1757 | /* | |
1758 | ** Note, the bit will be cleared when the device is | |
1759 | ** closed. This is the cleanest way to handle the | |
1760 | ** situation where the drive does not support | |
1761 | ** format progress reporting. | |
1762 | */ | |
1763 | case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS: | |
1764 | return idefloppy_get_format_progress(drive, argp); | |
1765 | } | |
89636af2 BZ |
1766 | |
1767 | /* | |
1768 | * skip SCSI_IOCTL_SEND_COMMAND (deprecated) | |
1769 | * and CDROM_SEND_PACKET (legacy) ioctls | |
1770 | */ | |
1771 | if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND) | |
1772 | err = scsi_cmd_ioctl(file, bdev->bd_disk->queue, | |
1773 | bdev->bd_disk, cmd, argp); | |
1774 | else | |
1775 | err = -ENOTTY; | |
1776 | ||
1777 | if (err == -ENOTTY) | |
1778 | err = generic_ide_ioctl(drive, file, bdev, cmd, arg); | |
1779 | ||
1780 | return err; | |
1da177e4 LT |
1781 | } |
1782 | ||
1783 | static int idefloppy_media_changed(struct gendisk *disk) | |
1784 | { | |
1785 | struct ide_floppy_obj *floppy = ide_floppy_g(disk); | |
1786 | ide_drive_t *drive = floppy->drive; | |
1787 | ||
1788 | /* do not scan partitions twice if this is a removable device */ | |
1789 | if (drive->attach) { | |
1790 | drive->attach = 0; | |
1791 | return 0; | |
1792 | } | |
1793 | return test_and_clear_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags); | |
1794 | } | |
1795 | ||
1796 | static int idefloppy_revalidate_disk(struct gendisk *disk) | |
1797 | { | |
1798 | struct ide_floppy_obj *floppy = ide_floppy_g(disk); | |
1799 | set_capacity(disk, idefloppy_capacity(floppy->drive)); | |
1800 | return 0; | |
1801 | } | |
1802 | ||
1803 | static struct block_device_operations idefloppy_ops = { | |
1804 | .owner = THIS_MODULE, | |
1805 | .open = idefloppy_open, | |
1806 | .release = idefloppy_release, | |
1807 | .ioctl = idefloppy_ioctl, | |
a885c8c4 | 1808 | .getgeo = idefloppy_getgeo, |
1da177e4 LT |
1809 | .media_changed = idefloppy_media_changed, |
1810 | .revalidate_disk= idefloppy_revalidate_disk | |
1811 | }; | |
1812 | ||
4031bbe4 | 1813 | static int ide_floppy_probe(ide_drive_t *drive) |
1da177e4 LT |
1814 | { |
1815 | idefloppy_floppy_t *floppy; | |
1816 | struct gendisk *g; | |
1817 | ||
1818 | if (!strstr("ide-floppy", drive->driver_req)) | |
1819 | goto failed; | |
1820 | if (!drive->present) | |
1821 | goto failed; | |
1822 | if (drive->media != ide_floppy) | |
1823 | goto failed; | |
1824 | if (!idefloppy_identify_device (drive, drive->id)) { | |
1825 | printk (KERN_ERR "ide-floppy: %s: not supported by this version of ide-floppy\n", drive->name); | |
1826 | goto failed; | |
1827 | } | |
1828 | if (drive->scsi) { | |
1829 | printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name); | |
1830 | goto failed; | |
1831 | } | |
5cbded58 | 1832 | if ((floppy = kzalloc(sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) { |
1da177e4 LT |
1833 | printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name); |
1834 | goto failed; | |
1835 | } | |
1836 | ||
1837 | g = alloc_disk(1 << PARTN_BITS); | |
1838 | if (!g) | |
1839 | goto out_free_floppy; | |
1840 | ||
1841 | ide_init_disk(g, drive); | |
1842 | ||
7662d046 | 1843 | ide_proc_register_driver(drive, &idefloppy_driver); |
1da177e4 | 1844 | |
1da177e4 LT |
1845 | kref_init(&floppy->kref); |
1846 | ||
1847 | floppy->drive = drive; | |
1848 | floppy->driver = &idefloppy_driver; | |
1849 | floppy->disk = g; | |
1850 | ||
1851 | g->private_data = &floppy->driver; | |
1852 | ||
1853 | drive->driver_data = floppy; | |
1854 | ||
1da177e4 | 1855 | idefloppy_setup (drive, floppy); |
8604affd | 1856 | |
1da177e4 LT |
1857 | g->minors = 1 << PARTN_BITS; |
1858 | g->driverfs_dev = &drive->gendev; | |
1da177e4 LT |
1859 | g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0; |
1860 | g->fops = &idefloppy_ops; | |
1861 | drive->attach = 1; | |
1862 | add_disk(g); | |
1863 | return 0; | |
1864 | ||
1da177e4 LT |
1865 | out_free_floppy: |
1866 | kfree(floppy); | |
1867 | failed: | |
8604affd | 1868 | return -ENODEV; |
1da177e4 LT |
1869 | } |
1870 | ||
1871 | MODULE_DESCRIPTION("ATAPI FLOPPY Driver"); | |
1872 | ||
1873 | static void __exit idefloppy_exit (void) | |
1874 | { | |
8604affd | 1875 | driver_unregister(&idefloppy_driver.gen_driver); |
1da177e4 LT |
1876 | } |
1877 | ||
17514e8a | 1878 | static int __init idefloppy_init(void) |
1da177e4 LT |
1879 | { |
1880 | printk("ide-floppy driver " IDEFLOPPY_VERSION "\n"); | |
8604affd | 1881 | return driver_register(&idefloppy_driver.gen_driver); |
1da177e4 LT |
1882 | } |
1883 | ||
263756ec | 1884 | MODULE_ALIAS("ide:*m-floppy*"); |
1da177e4 LT |
1885 | module_init(idefloppy_init); |
1886 | module_exit(idefloppy_exit); | |
1887 | MODULE_LICENSE("GPL"); |