[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / bluetooth / Kconfig


menu "Bluetooth device drivers"
	depends on BT

config BT_HCIBTUSB
	tristate "HCI USB driver"
	depends on USB
	help
	  Bluetooth HCI USB driver.
	  This driver is required if you want to use Bluetooth devices with
	  USB interface.

	  Say Y here to compile support for Bluetooth USB devices into the
	  kernel or say M to compile it as module (btusb).

config BT_HCIBTSDIO
	tristate "HCI SDIO driver"
	depends on MMC
	help
	  Bluetooth HCI SDIO driver.
	  This driver is required if you want to use Bluetooth device with
	  SDIO interface.

	  Say Y here to compile support for Bluetooth SDIO devices into the
	  kernel or say M to compile it as module (btsdio).

config BT_HCIUART
	tristate "HCI UART driver"
	help
	  Bluetooth HCI UART driver.
	  This driver is required if you want to use Bluetooth devices with
	  serial port interface. You will also need this driver if you have 
	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card 
	  adapter and BrainBoxes Bluetooth PC Card.

	  Say Y here to compile support for Bluetooth UART devices into the
	  kernel or say M to compile it as module (hci_uart).

config BT_HCIUART_H4
	bool "UART (H4) protocol support"
	depends on BT_HCIUART
	help
	  UART (H4) is serial protocol for communication between Bluetooth 
	  device and host. This protocol is required for most Bluetooth devices 
	  with UART interface, including PCMCIA and CF cards. 

	  Say Y here to compile support for HCI UART (H4) protocol.

config BT_HCIUART_BCSP
	bool "BCSP protocol support"
	depends on BT_HCIUART
	select BITREVERSE
	help
	  BCSP (BlueCore Serial Protocol) is serial protocol for communication 
	  between Bluetooth device and host. This protocol is required for non
	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	  CF cards.

	  Say Y here to compile support for HCI BCSP protocol.

config BT_HCIUART_ATH3K
	bool "Atheros AR300x serial support"
	depends on BT_HCIUART
	help
	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	  communication between host and Atheros AR300x Bluetooth devices.
	  This protocol enables AR300x chips to be enabled with
	  power management support.
	  Enable this if you have Atheros AR300x serial Bluetooth device.

	  Say Y here to compile support for HCI UART ATH3K protocol.

config BT_HCIUART_LL
	bool "HCILL protocol support"
	depends on BT_HCIUART
	help
	  HCILL (HCI Low Level) is a serial protocol for communication
	  between Bluetooth device and host. This protocol is required for
	  serial Bluetooth devices that are based on Texas Instruments'
	  BRF chips.

	  Say Y here to compile support for HCILL protocol.

config BT_HCIBCM203X
	tristate "HCI BCM203x USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BCM203x USB driver.
	  This driver provides the firmware loading mechanism for the Broadcom
	  Blutonium based devices.

	  Say Y here to compile support for HCI BCM203x devices into the
	  kernel or say M to compile it as module (bcm203x).

config BT_HCIBPA10X
	tristate "HCI BPA10x USB driver"
	depends on USB
	help
	  Bluetooth HCI BPA10x USB driver.
	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
	  sniffer devices.

	  Say Y here to compile support for HCI BPA10x devices into the
	  kernel or say M to compile it as module (bpa10x).

config BT_HCIBFUSB
	tristate "HCI BlueFRITZ! USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BlueFRITZ! USB driver.
	  This driver provides support for Bluetooth USB devices with AVM
	  interface:
	     AVM BlueFRITZ! USB

	  Say Y here to compile support for HCI BFUSB devices into the
	  kernel or say M to compile it as module (bfusb).

config BT_HCIDTL1
	tristate "HCI DTL1 (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI DTL1 (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Nokia DTL1 interface:
	     Nokia Bluetooth Card
	     Socket Bluetooth CF Card

	  Say Y here to compile support for HCI DTL1 devices into the
	  kernel or say M to compile it as module (dtl1_cs).

config BT_HCIBT3C
	tristate "HCI BT3C (PC Card) driver"
	depends on PCMCIA
	select FW_LOADER
	help
	  Bluetooth HCI BT3C (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  3Com BT3C interface:
	     3Com Bluetooth Card (3CRWB6096)
	     HP Bluetooth Card

	  Say Y here to compile support for HCI BT3C devices into the
	  kernel or say M to compile it as module (bt3c_cs).

config BT_HCIBLUECARD
	tristate "HCI BlueCard (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI BlueCard (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Anycom BlueCard interface:
	     Anycom Bluetooth PC Card
	     Anycom Bluetooth CF Card

	  Say Y here to compile support for HCI BlueCard devices into the
	  kernel or say M to compile it as module (bluecard_cs).

config BT_HCIBTUART
	tristate "HCI UART (PC Card) device driver"
	depends on PCMCIA
	help
	  Bluetooth HCI UART (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  an UART interface:
	     Xircom CreditCard Bluetooth Adapter
	     Xircom RealPort2 Bluetooth Adapter
	     Sphinx PICO Card
	     H-Soft blue+Card
	     Cyber-blue Compact Flash Card

	  Say Y here to compile support for HCI UART devices into the
	  kernel or say M to compile it as module (btuart_cs).

config BT_HCIVHCI
	tristate "HCI VHCI (Virtual HCI device) driver"
	help
	  Bluetooth Virtual HCI device driver.
	  This driver is required if you want to use HCI Emulation software.

	  Say Y here to compile support for virtual HCI devices into the
	  kernel or say M to compile it as module (hci_vhci).

config BT_MRVL
	tristate "Marvell Bluetooth driver support"
	help
	  The core driver to support Marvell Bluetooth devices.

	  This driver is required if you want to support
	  Marvell Bluetooth devices, such as 8688/8787.

	  Say Y here to compile Marvell Bluetooth driver
	  into the kernel or say M to compile it as module.

config BT_MRVL_SDIO
	tristate "Marvell BT-over-SDIO driver"
	depends on BT_MRVL && MMC
	select FW_LOADER
	help
	  The driver for Marvell Bluetooth chipsets with SDIO interface.

	  This driver is required if you want to use Marvell Bluetooth
	  devices with SDIO interface. Currently SD8688/SD8787 chipsets are
	  supported.

	  Say Y here to compile support for Marvell BT-over-SDIO driver
	  into the kernel or say M to compile it as module.

config BT_ATH3K
	tristate "Atheros firmware download driver"
	depends on BT_HCIBTUSB
	select FW_LOADER
	help
	  Bluetooth firmware download driver.
	  This driver loads the firmware into the Atheros Bluetooth
	  chipset.

	  Say Y here to compile support for "Atheros firmware download driver"
	  into the kernel or say M to compile it as module (ath3k).

config BT_WILINK
	tristate "Texas Instruments WiLink7 driver"
	depends on TI_ST
	help
	  This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	  combo devices. This makes use of shared transport line discipline
	  core driver to communicate with the BT core of the combo chip.

	  Say Y here to compile support for Texas Instrument's WiLink7 driver
	  into the kernel or say M to compile it as module.
endmenu
Commit	Line	Data
1da177e4 LT	1
	2	menu "Bluetooth device drivers"
	3	depends on BT
	4
5e23b923	5	config BT_HCIBTUSB
9bfa35fe MH	6	tristate "HCI USB driver"
9bfa35fe MH	7	depends on USB
5e23b923 MH	8	help
	9	Bluetooth HCI USB driver.
	10	This driver is required if you want to use Bluetooth devices with
	11	USB interface.
	12
5e23b923 MH	13	Say Y here to compile support for Bluetooth USB devices into the
	14	kernel or say M to compile it as module (btusb).
	15
ddbaf13e MH	16	config BT_HCIBTSDIO
	17	tristate "HCI SDIO driver"
	18	depends on MMC
	19	help
	20	Bluetooth HCI SDIO driver.
	21	This driver is required if you want to use Bluetooth device with
	22	SDIO interface.
	23
	24	Say Y here to compile support for Bluetooth SDIO devices into the
	25	kernel or say M to compile it as module (btsdio).
	26
1da177e4 LT	27	config BT_HCIUART
	28	tristate "HCI UART driver"
	29	help
	30	Bluetooth HCI UART driver.
	31	This driver is required if you want to use Bluetooth devices with
	32	serial port interface. You will also need this driver if you have
	33	UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
	34	adapter and BrainBoxes Bluetooth PC Card.
	35
	36	Say Y here to compile support for Bluetooth UART devices into the
	37	kernel or say M to compile it as module (hci_uart).
	38
	39	config BT_HCIUART_H4
	40	bool "UART (H4) protocol support"
	41	depends on BT_HCIUART
	42	help
	43	UART (H4) is serial protocol for communication between Bluetooth
	44	device and host. This protocol is required for most Bluetooth devices
	45	with UART interface, including PCMCIA and CF cards.
	46
	47	Say Y here to compile support for HCI UART (H4) protocol.
	48
	49	config BT_HCIUART_BCSP
	50	bool "BCSP protocol support"
	51	depends on BT_HCIUART
d3a8eab0	52	select BITREVERSE
1da177e4 LT	53	help
	54	BCSP (BlueCore Serial Protocol) is serial protocol for communication
	55	between Bluetooth device and host. This protocol is required for non
	56	USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	57	CF cards.
	58
	59	Say Y here to compile support for HCI BCSP protocol.
	60
b3190df6 SS	61	config BT_HCIUART_ATH3K
	62	bool "Atheros AR300x serial support"
	63	depends on BT_HCIUART
	64	help
	65	HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	66	communication between host and Atheros AR300x Bluetooth devices.
	67	This protocol enables AR300x chips to be enabled with
	68	power management support.
	69	Enable this if you have Atheros AR300x serial Bluetooth device.
	70
	71	Say Y here to compile support for HCI UART ATH3K protocol.
	72
166d2f6a OBC	73	config BT_HCIUART_LL
	74	bool "HCILL protocol support"
	75	depends on BT_HCIUART
	76	help
	77	HCILL (HCI Low Level) is a serial protocol for communication
	78	between Bluetooth device and host. This protocol is required for
	79	serial Bluetooth devices that are based on Texas Instruments'
	80	BRF chips.
	81
	82	Say Y here to compile support for HCILL protocol.
	83
1da177e4 LT	84	config BT_HCIBCM203X
	85	tristate "HCI BCM203x USB driver"
	86	depends on USB
	87	select FW_LOADER
	88	help
	89	Bluetooth HCI BCM203x USB driver.
	90	This driver provides the firmware loading mechanism for the Broadcom
	91	Blutonium based devices.
	92
	93	Say Y here to compile support for HCI BCM203x devices into the
	94	kernel or say M to compile it as module (bcm203x).
	95
	96	config BT_HCIBPA10X
	97	tristate "HCI BPA10x USB driver"
	98	depends on USB
	99	help
	100	Bluetooth HCI BPA10x USB driver.
	101	This driver provides support for the Digianswer BPA 100/105 Bluetooth
	102	sniffer devices.
	103
	104	Say Y here to compile support for HCI BPA10x devices into the
	105	kernel or say M to compile it as module (bpa10x).
	106
	107	config BT_HCIBFUSB
	108	tristate "HCI BlueFRITZ! USB driver"
	109	depends on USB
	110	select FW_LOADER
	111	help
	112	Bluetooth HCI BlueFRITZ! USB driver.
	113	This driver provides support for Bluetooth USB devices with AVM
	114	interface:
	115	AVM BlueFRITZ! USB
	116
	117	Say Y here to compile support for HCI BFUSB devices into the
	118	kernel or say M to compile it as module (bfusb).
	119
	120	config BT_HCIDTL1
	121	tristate "HCI DTL1 (PC Card) driver"
	122	depends on PCMCIA
	123	help
	124	Bluetooth HCI DTL1 (PC Card) driver.
	125	This driver provides support for Bluetooth PCMCIA devices with
	126	Nokia DTL1 interface:
	127	Nokia Bluetooth Card
	128	Socket Bluetooth CF Card
	129
	130	Say Y here to compile support for HCI DTL1 devices into the
	131	kernel or say M to compile it as module (dtl1_cs).
	132
	133	config BT_HCIBT3C
	134	tristate "HCI BT3C (PC Card) driver"
	135	depends on PCMCIA
	136	select FW_LOADER
	137	help
	138	Bluetooth HCI BT3C (PC Card) driver.
	139	This driver provides support for Bluetooth PCMCIA devices with
	140	3Com BT3C interface:
	141	3Com Bluetooth Card (3CRWB6096)
	142	HP Bluetooth Card
	143
	144	Say Y here to compile support for HCI BT3C devices into the
	145	kernel or say M to compile it as module (bt3c_cs).
	146
	147	config BT_HCIBLUECARD
148	tristate "HCI BlueCard (PC Card) driver"
149	depends on PCMCIA
150	help
151	Bluetooth HCI BlueCard (PC Card) driver.
152	This driver provides support for Bluetooth PCMCIA devices with
153	Anycom BlueCard interface:
154	Anycom Bluetooth PC Card
155	Anycom Bluetooth CF Card
156
157	Say Y here to compile support for HCI BlueCard devices into the
158	kernel or say M to compile it as module (bluecard_cs).
159
160	config BT_HCIBTUART
161	tristate "HCI UART (PC Card) device driver"
162	depends on PCMCIA
163	help
164	Bluetooth HCI UART (PC Card) driver.
165	This driver provides support for Bluetooth PCMCIA devices with
166	an UART interface:
167	Xircom CreditCard Bluetooth Adapter
168	Xircom RealPort2 Bluetooth Adapter
169	Sphinx PICO Card
170	H-Soft blue+Card
171	Cyber-blue Compact Flash Card
172
173	Say Y here to compile support for HCI UART devices into the
174	kernel or say M to compile it as module (btuart_cs).
175
176	config BT_HCIVHCI
177	tristate "HCI VHCI (Virtual HCI device) driver"
178	help
179	Bluetooth Virtual HCI device driver.
180	This driver is required if you want to use HCI Emulation software.
181
182	Say Y here to compile support for virtual HCI devices into the
183	kernel or say M to compile it as module (hci_vhci).
184
132ff4e5 BZ	185	config BT_MRVL
132ff4e5 BZ	186	tristate "Marvell Bluetooth driver support"
132ff4e5 BZ	187	help
	188	The core driver to support Marvell Bluetooth devices.
	189
	190	This driver is required if you want to support
9f72c1d9	191	Marvell Bluetooth devices, such as 8688/8787.
132ff4e5 BZ	192
	193	Say Y here to compile Marvell Bluetooth driver
	194	into the kernel or say M to compile it as module.
	195
789221ec BZ	196	config BT_MRVL_SDIO
	197	tristate "Marvell BT-over-SDIO driver"
	198	depends on BT_MRVL && MMC
e7a25f98	199	select FW_LOADER
789221ec BZ	200	help
	201	The driver for Marvell Bluetooth chipsets with SDIO interface.
	202
	203	This driver is required if you want to use Marvell Bluetooth
9f72c1d9	204	devices with SDIO interface. Currently SD8688/SD8787 chipsets are
789221ec BZ	205	supported.
	206
	207	Say Y here to compile support for Marvell BT-over-SDIO driver
	208	into the kernel or say M to compile it as module.
	209
9670d80a VK	210	config BT_ATH3K
	211	tristate "Atheros firmware download driver"
	212	depends on BT_HCIBTUSB
	213	select FW_LOADER
	214	help
	215	Bluetooth firmware download driver.
	216	This driver loads the firmware into the Atheros Bluetooth
	217	chipset.
1da177e4	218
9670d80a VK	219	Say Y here to compile support for "Atheros firmware download driver"
	220	into the kernel or say M to compile it as module (ath3k).
	221
363907af PS	222	config BT_WILINK
	223	tristate "Texas Instruments WiLink7 driver"
	224	depends on TI_ST
	225	help
	226	This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	227	combo devices. This makes use of shared transport line discipline
	228	core driver to communicate with the BT core of the combo chip.
	229
	230	Say Y here to compile support for Texas Instrument's WiLink7 driver
	231	into the kernel or say M to compile it as module.
9670d80a	232	endmenu