[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / ata / pata_pdc202xx_old.c

/*
 * pata_pdc202xx_old.c 	- Promise PDC202xx PATA for new ATA layer
 *			  (C) 2005 Red Hat Inc
 *			  Alan Cox <alan@redhat.com>
 *
 * Based in part on linux/drivers/ide/pci/pdc202xx_old.c
 *
 * First cut with LBA48/ATAPI
 *
 * TODO:
 *	Channel interlock/reset on both required ?
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>

#define DRV_NAME "pata_pdc202xx_old"
#define DRV_VERSION "0.2.1"

/**
 *	pdc2024x_pre_reset		-	probe begin
 *	@ap: ATA port
 *
 *	Set up cable type and use generic probe init
 */

static int pdc2024x_pre_reset(struct ata_port *ap)
{
	ap->cbl = ATA_CBL_PATA40;
	return ata_std_prereset(ap);
}


static void pdc2024x_error_handler(struct ata_port *ap)
{
	ata_bmdma_drive_eh(ap, pdc2024x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
}


static int pdc2026x_pre_reset(struct ata_port *ap)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	u16 cis;

	pci_read_config_word(pdev, 0x50, &cis);
	if (cis & (1 << (10 + ap->port_no)))
		ap->cbl = ATA_CBL_PATA80;
	else
		ap->cbl = ATA_CBL_PATA40;

	return ata_std_prereset(ap);
}

static void pdc2026x_error_handler(struct ata_port *ap)
{
	ata_bmdma_drive_eh(ap, pdc2026x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
}

/**
 *	pdc_configure_piomode	-	set chip PIO timing
 *	@ap: ATA interface
 *	@adev: ATA device
 *	@pio: PIO mode
 *
 *	Called to do the PIO mode setup. Our timing registers are shared
 *	so a configure_dmamode call will undo any work we do here and vice
 *	versa
 */

static void pdc_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
	static u16 pio_timing[5] = {
		0x0913, 0x050C , 0x0308, 0x0206, 0x0104
	};
	u8 r_ap, r_bp;

	pci_read_config_byte(pdev, port, &r_ap);
	pci_read_config_byte(pdev, port + 1, &r_bp);
	r_ap &= ~0x3F;	/* Preserve ERRDY_EN, SYNC_IN */
	r_bp &= ~0x07;
	r_ap |= (pio_timing[pio] >> 8);
	r_bp |= (pio_timing[pio] & 0xFF);

	if (ata_pio_need_iordy(adev))
		r_ap |= 0x20;	/* IORDY enable */
	if (adev->class == ATA_DEV_ATA)
		r_ap |= 0x10;	/* FIFO enable */
	pci_write_config_byte(pdev, port, r_ap);
	pci_write_config_byte(pdev, port + 1, r_bp);
}

/**
 *	pdc_set_piomode	-	set initial PIO mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Called to do the PIO mode setup. Our timing registers are shared
 *	but we want to set the PIO timing by default.
 */

static void pdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
	pdc_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
}

/**
 *	pdc_configure_dmamode	-	set DMA mode in chip
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Load DMA cycle times into the chip ready for a DMA transfer
 *	to occur.
 */

static void pdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
	static u8 udma_timing[6][2] = {
		{ 0x60, 0x03 },	/* 33 Mhz Clock */
		{ 0x40, 0x02 },
		{ 0x20, 0x01 },
		{ 0x40, 0x02 },	/* 66 Mhz Clock */
		{ 0x20, 0x01 },
		{ 0x20, 0x01 }
	};
	u8 r_bp, r_cp;

	pci_read_config_byte(pdev, port + 1, &r_bp);
	pci_read_config_byte(pdev, port + 2, &r_cp);

	r_bp &= ~0xF0;
	r_cp &= ~0x0F;

	if (adev->dma_mode >= XFER_UDMA_0) {
		int speed = adev->dma_mode - XFER_UDMA_0;
		r_bp |= udma_timing[speed][0];
		r_cp |= udma_timing[speed][1];

	} else {
		int speed = adev->dma_mode - XFER_MW_DMA_0;
		r_bp |= 0x60;
		r_cp |= (5 - speed);
	}
	pci_write_config_byte(pdev, port + 1, r_bp);
	pci_write_config_byte(pdev, port + 2, r_cp);

}

/**
 *	pdc2026x_bmdma_start		-	DMA engine begin
 *	@qc: ATA command
 *
 *	In UDMA3 or higher we have to clock switch for the duration of the
 *	DMA transfer sequence.
 */

static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct ata_device *adev = qc->dev;
	struct ata_taskfile *tf = &qc->tf;
	int sel66 = ap->port_no ? 0x08: 0x02;

	unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr;
	unsigned long clock = master + 0x11;
	unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no);

	u32 len;

	/* Check we keep host level locking here */
	if (adev->dma_mode >= XFER_UDMA_2)
		outb(inb(clock) | sel66, clock);
	else
		outb(inb(clock) & ~sel66, clock);

	/* The DMA clocks may have been trashed by a reset. FIXME: make conditional
	   and move to qc_issue ? */
	pdc_set_dmamode(ap, qc->dev);

	/* Cases the state machine will not complete correctly without help */
	if ((tf->flags & ATA_TFLAG_LBA48) ||  tf->protocol == ATA_PROT_ATAPI_DMA)
	{
		if (tf->flags & ATA_TFLAG_LBA48)
			len = qc->nsect * 512;
		else
			len = qc->nbytes;

		if (tf->flags & ATA_TFLAG_WRITE)
			len |= 0x06000000;
		else
			len |= 0x05000000;

		outl(len, atapi_reg);
	}

	/* Activate DMA */
	ata_bmdma_start(qc);
}

/**
 *	pdc2026x_bmdma_end		-	DMA engine stop
 *	@qc: ATA command
 *
 *	After a DMA completes we need to put the clock back to 33MHz for
 *	PIO timings.
 */

static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct ata_device *adev = qc->dev;
	struct ata_taskfile *tf = &qc->tf;

	int sel66 = ap->port_no ? 0x08: 0x02;
	/* The clock bits are in the same register for both channels */
	unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr;
	unsigned long clock = master + 0x11;
	unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no);

	/* Cases the state machine will not complete correctly */
	if (tf->protocol == ATA_PROT_ATAPI_DMA || ( tf->flags & ATA_TFLAG_LBA48)) {
		outl(0, atapi_reg);
		outb(inb(clock) & ~sel66, clock);
	}
	/* Check we keep host level locking here */
	/* Flip back to 33Mhz for PIO */
	if (adev->dma_mode >= XFER_UDMA_2)
		outb(inb(clock) & ~sel66, clock);

	ata_bmdma_stop(qc);
}

/**
 *	pdc2026x_dev_config	-	device setup hook
 *	@ap: ATA port
 *	@adev: newly found device
 *
 *	Perform chip specific early setup. We need to lock the transfer
 *	sizes to 8bit to avoid making the state engine on the 2026x cards
 *	barf.
 */

static void pdc2026x_dev_config(struct ata_port *ap, struct ata_device *adev)
{
	adev->max_sectors = 256;
}

static struct scsi_host_template pdc_sht = {
	.module			= THIS_MODULE,
	.name			= DRV_NAME,
	.ioctl			= ata_scsi_ioctl,
	.queuecommand		= ata_scsi_queuecmd,
	.can_queue		= ATA_DEF_QUEUE,
	.this_id		= ATA_SHT_THIS_ID,
	.sg_tablesize		= LIBATA_MAX_PRD,
	.max_sectors		= ATA_MAX_SECTORS,
	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
	.emulated		= ATA_SHT_EMULATED,
	.use_clustering		= ATA_SHT_USE_CLUSTERING,
	.proc_name		= DRV_NAME,
	.dma_boundary		= ATA_DMA_BOUNDARY,
	.slave_configure	= ata_scsi_slave_config,
	.slave_destroy		= ata_scsi_slave_destroy,
	.bios_param		= ata_std_bios_param,
};

static struct ata_port_operations pdc2024x_port_ops = {
	.port_disable	= ata_port_disable,
	.set_piomode	= pdc_set_piomode,
	.set_dmamode	= pdc_set_dmamode,
	.mode_filter	= ata_pci_default_filter,
	.tf_load	= ata_tf_load,
	.tf_read	= ata_tf_read,
	.check_status 	= ata_check_status,
	.exec_command	= ata_exec_command,
	.dev_select 	= ata_std_dev_select,

	.freeze		= ata_bmdma_freeze,
	.thaw		= ata_bmdma_thaw,
	.error_handler	= pdc2024x_error_handler,
	.post_internal_cmd = ata_bmdma_post_internal_cmd,

	.bmdma_setup 	= ata_bmdma_setup,
	.bmdma_start 	= ata_bmdma_start,
	.bmdma_stop	= ata_bmdma_stop,
	.bmdma_status 	= ata_bmdma_status,

	.qc_prep 	= ata_qc_prep,
	.qc_issue	= ata_qc_issue_prot,
	.data_xfer	= ata_pio_data_xfer,

	.irq_handler	= ata_interrupt,
	.irq_clear	= ata_bmdma_irq_clear,

	.port_start	= ata_port_start,
	.port_stop	= ata_port_stop,
	.host_stop	= ata_host_stop
};

static struct ata_port_operations pdc2026x_port_ops = {
	.port_disable	= ata_port_disable,
	.set_piomode	= pdc_set_piomode,
	.set_dmamode	= pdc_set_dmamode,
	.mode_filter	= ata_pci_default_filter,
	.tf_load	= ata_tf_load,
	.tf_read	= ata_tf_read,
	.check_status 	= ata_check_status,
	.exec_command	= ata_exec_command,
	.dev_select 	= ata_std_dev_select,
	.dev_config	= pdc2026x_dev_config,

	.freeze		= ata_bmdma_freeze,
	.thaw		= ata_bmdma_thaw,
	.error_handler	= pdc2026x_error_handler,
	.post_internal_cmd = ata_bmdma_post_internal_cmd,

	.bmdma_setup 	= ata_bmdma_setup,
	.bmdma_start 	= pdc2026x_bmdma_start,
	.bmdma_stop	= pdc2026x_bmdma_stop,
	.bmdma_status 	= ata_bmdma_status,

	.qc_prep 	= ata_qc_prep,
	.qc_issue	= ata_qc_issue_prot,
	.data_xfer	= ata_pio_data_xfer,

	.irq_handler	= ata_interrupt,
	.irq_clear	= ata_bmdma_irq_clear,

	.port_start	= ata_port_start,
	.port_stop	= ata_port_stop,
	.host_stop	= ata_host_stop
};

static int pdc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	static struct ata_port_info info[3] = {
		{
			.sht = &pdc_sht,
			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
			.pio_mask = 0x1f,
			.mwdma_mask = 0x07,
			.udma_mask = ATA_UDMA2,
			.port_ops = &pdc2024x_port_ops
		},
		{
			.sht = &pdc_sht,
			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
			.pio_mask = 0x1f,
			.mwdma_mask = 0x07,
			.udma_mask = ATA_UDMA4,
			.port_ops = &pdc2026x_port_ops
		},
		{
			.sht = &pdc_sht,
			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
			.pio_mask = 0x1f,
			.mwdma_mask = 0x07,
			.udma_mask = ATA_UDMA5,
			.port_ops = &pdc2026x_port_ops
		}

	};
	static struct ata_port_info *port_info[2];

	port_info[0] = port_info[1] = &info[id->driver_data];

	if (dev->device == PCI_DEVICE_ID_PROMISE_20265) {
		struct pci_dev *bridge = dev->bus->self;
		/* Don't grab anything behind a Promise I2O RAID */
		if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
			if( bridge->device == PCI_DEVICE_ID_INTEL_I960)
				return -ENODEV;
			if( bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
				return -ENODEV;
		}
	}
	return ata_pci_init_one(dev, port_info, 2);
}

static const struct pci_device_id pdc[] = {
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 },

	{ },
};

static struct pci_driver pdc_pci_driver = {
	.name 		= DRV_NAME,
	.id_table	= pdc,
	.probe 		= pdc_init_one,
	.remove		= ata_pci_remove_one
};

static int __init pdc_init(void)
{
	return pci_register_driver(&pdc_pci_driver);
}

static void __exit pdc_exit(void)
{
	pci_unregister_driver(&pdc_pci_driver);
}

MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for Promise 2024x and 20262-20267");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, pdc);
MODULE_VERSION(DRV_VERSION);

module_init(pdc_init);
module_exit(pdc_exit);
Commit	Line	Data
669a5db4 JG	1	/*
	2	* pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer
	3	* (C) 2005 Red Hat Inc
	4	* Alan Cox <alan@redhat.com>
	5	*
	6	* Based in part on linux/drivers/ide/pci/pdc202xx_old.c
	7	*
	8	* First cut with LBA48/ATAPI
	9	*
	10	* TODO:
	11	* Channel interlock/reset on both required ?
	12	*/
85cd7251	13
669a5db4 JG	14	#include <linux/kernel.h>
	15	#include <linux/module.h>
	16	#include <linux/pci.h>
	17	#include <linux/init.h>
	18	#include <linux/blkdev.h>
	19	#include <linux/delay.h>
	20	#include <scsi/scsi_host.h>
	21	#include <linux/libata.h>
	22
	23	#define DRV_NAME "pata_pdc202xx_old"
	24	#define DRV_VERSION "0.2.1"
	25
	26	/**
	27	* pdc2024x_pre_reset - probe begin
	28	* @ap: ATA port
	29	*
	30	* Set up cable type and use generic probe init
	31	*/
85cd7251	32
669a5db4 JG	33	static int pdc2024x_pre_reset(struct ata_port *ap)
	34	{
	35	ap->cbl = ATA_CBL_PATA40;
	36	return ata_std_prereset(ap);
	37	}
	38
	39
	40	static void pdc2024x_error_handler(struct ata_port *ap)
	41	{
	42	ata_bmdma_drive_eh(ap, pdc2024x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
	43	}
	44
	45
	46	static int pdc2026x_pre_reset(struct ata_port *ap)
	47	{
	48	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	49	u16 cis;
85cd7251	50
669a5db4 JG	51	pci_read_config_word(pdev, 0x50, &cis);
	52	if (cis & (1 << (10 + ap->port_no)))
	53	ap->cbl = ATA_CBL_PATA80;
	54	else
	55	ap->cbl = ATA_CBL_PATA40;
	56
	57	return ata_std_prereset(ap);
	58	}
	59
	60	static void pdc2026x_error_handler(struct ata_port *ap)
	61	{
	62	ata_bmdma_drive_eh(ap, pdc2026x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
	63	}
	64
	65	/**
	66	* pdc_configure_piomode - set chip PIO timing
	67	* @ap: ATA interface
	68	* @adev: ATA device
	69	* @pio: PIO mode
	70	*
	71	* Called to do the PIO mode setup. Our timing registers are shared
	72	* so a configure_dmamode call will undo any work we do here and vice
	73	* versa
	74	*/
85cd7251	75
669a5db4 JG	76	static void pdc_configure_piomode(struct ata_port ap, struct ata_device adev, int pio)
	77	{
	78	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	79	int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
	80	static u16 pio_timing[5] = {
	81	0x0913, 0x050C , 0x0308, 0x0206, 0x0104
	82	};
	83	u8 r_ap, r_bp;
	84
	85	pci_read_config_byte(pdev, port, &r_ap);
	86	pci_read_config_byte(pdev, port + 1, &r_bp);
	87	r_ap &= ~0x3F; /* Preserve ERRDY_EN, SYNC_IN */
	88	r_bp &= ~0x07;
	89	r_ap \|= (pio_timing[pio] >> 8);
	90	r_bp \|= (pio_timing[pio] & 0xFF);
85cd7251	91
669a5db4 JG	92	if (ata_pio_need_iordy(adev))
	93	r_ap \|= 0x20; /* IORDY enable */
	94	if (adev->class == ATA_DEV_ATA)
	95	r_ap \|= 0x10; /* FIFO enable */
	96	pci_write_config_byte(pdev, port, r_ap);
	97	pci_write_config_byte(pdev, port + 1, r_bp);
	98	}
	99
	100	/**
	101	* pdc_set_piomode - set initial PIO mode data
	102	* @ap: ATA interface
	103	* @adev: ATA device
	104	*
	105	* Called to do the PIO mode setup. Our timing registers are shared
	106	* but we want to set the PIO timing by default.
	107	*/
85cd7251	108
669a5db4 JG	109	static void pdc_set_piomode(struct ata_port ap, struct ata_device adev)
	110	{
	111	pdc_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
	112	}
	113
	114	/**
	115	* pdc_configure_dmamode - set DMA mode in chip
	116	* @ap: ATA interface
	117	* @adev: ATA device
	118	*
	119	* Load DMA cycle times into the chip ready for a DMA transfer
	120	* to occur.
	121	*/
85cd7251	122
669a5db4 JG	123	static void pdc_set_dmamode(struct ata_port ap, struct ata_device adev)
	124	{
	125	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	126	int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
	127	static u8 udma_timing[6][2] = {
	128	{ 0x60, 0x03 }, /* 33 Mhz Clock */
	129	{ 0x40, 0x02 },
	130	{ 0x20, 0x01 },
	131	{ 0x40, 0x02 }, /* 66 Mhz Clock */
	132	{ 0x20, 0x01 },
85cd7251	133	{ 0x20, 0x01 }
669a5db4 JG	134	};
669a5db4 JG	135	u8 r_bp, r_cp;
85cd7251	136
669a5db4 JG	137	pci_read_config_byte(pdev, port + 1, &r_bp);
669a5db4 JG	138	pci_read_config_byte(pdev, port + 2, &r_cp);
85cd7251	139
669a5db4 JG	140	r_bp &= ~0xF0;
669a5db4 JG	141	r_cp &= ~0x0F;
85cd7251	142
669a5db4 JG	143	if (adev->dma_mode >= XFER_UDMA_0) {
	144	int speed = adev->dma_mode - XFER_UDMA_0;
	145	r_bp \|= udma_timing[speed][0];
	146	r_cp \|= udma_timing[speed][1];
85cd7251	147
669a5db4 JG	148	} else {
	149	int speed = adev->dma_mode - XFER_MW_DMA_0;
	150	r_bp \|= 0x60;
	151	r_cp \|= (5 - speed);
	152	}
	153	pci_write_config_byte(pdev, port + 1, r_bp);
	154	pci_write_config_byte(pdev, port + 2, r_cp);
85cd7251	155
669a5db4 JG	156	}
	157
	158	/**
	159	* pdc2026x_bmdma_start - DMA engine begin
	160	* @qc: ATA command
	161	*
	162	* In UDMA3 or higher we have to clock switch for the duration of the
	163	* DMA transfer sequence.
	164	*/
85cd7251	165
669a5db4 JG	166	static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
	167	{
	168	struct ata_port *ap = qc->ap;
	169	struct ata_device *adev = qc->dev;
	170	struct ata_taskfile *tf = &qc->tf;
	171	int sel66 = ap->port_no ? 0x08: 0x02;
	172
	173	unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr;
	174	unsigned long clock = master + 0x11;
	175	unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no);
85cd7251	176
669a5db4	177	u32 len;
85cd7251	178
669a5db4 JG	179	/* Check we keep host level locking here */
	180	if (adev->dma_mode >= XFER_UDMA_2)
	181	outb(inb(clock) \| sel66, clock);
	182	else
	183	outb(inb(clock) & ~sel66, clock);
	184
85cd7251	185	/* The DMA clocks may have been trashed by a reset. FIXME: make conditional
669a5db4 JG	186	and move to qc_issue ? */
	187	pdc_set_dmamode(ap, qc->dev);
	188
	189	/* Cases the state machine will not complete correctly without help */
	190	if ((tf->flags & ATA_TFLAG_LBA48) \|\| tf->protocol == ATA_PROT_ATAPI_DMA)
	191	{
	192	if (tf->flags & ATA_TFLAG_LBA48)
	193	len = qc->nsect * 512;
	194	else
	195	len = qc->nbytes;
85cd7251	196
669a5db4 JG	197	if (tf->flags & ATA_TFLAG_WRITE)
	198	len \|= 0x06000000;
	199	else
	200	len \|= 0x05000000;
85cd7251	201
669a5db4 JG	202	outl(len, atapi_reg);
669a5db4 JG	203	}
85cd7251 JG	204
85cd7251 JG	205	/* Activate DMA */
669a5db4 JG	206	ata_bmdma_start(qc);
	207	}
	208
	209	/**
	210	* pdc2026x_bmdma_end - DMA engine stop
	211	* @qc: ATA command
	212	*
	213	* After a DMA completes we need to put the clock back to 33MHz for
	214	* PIO timings.
	215	*/
85cd7251	216
669a5db4 JG	217	static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
	218	{
	219	struct ata_port *ap = qc->ap;
	220	struct ata_device *adev = qc->dev;
	221	struct ata_taskfile *tf = &qc->tf;
85cd7251	222
669a5db4 JG	223	int sel66 = ap->port_no ? 0x08: 0x02;
	224	/* The clock bits are in the same register for both channels */
	225	unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr;
	226	unsigned long clock = master + 0x11;
	227	unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no);
85cd7251	228
669a5db4 JG	229	/* Cases the state machine will not complete correctly */
	230	if (tf->protocol == ATA_PROT_ATAPI_DMA \|\| ( tf->flags & ATA_TFLAG_LBA48)) {
	231	outl(0, atapi_reg);
	232	outb(inb(clock) & ~sel66, clock);
	233	}
	234	/* Check we keep host level locking here */
	235	/* Flip back to 33Mhz for PIO */
	236	if (adev->dma_mode >= XFER_UDMA_2)
	237	outb(inb(clock) & ~sel66, clock);
	238
	239	ata_bmdma_stop(qc);
	240	}
	241
	242	/**
	243	* pdc2026x_dev_config - device setup hook
	244	* @ap: ATA port
	245	* @adev: newly found device
	246	*
	247	* Perform chip specific early setup. We need to lock the transfer
	248	* sizes to 8bit to avoid making the state engine on the 2026x cards
	249	* barf.
	250	*/
85cd7251	251
669a5db4 JG	252	static void pdc2026x_dev_config(struct ata_port ap, struct ata_device adev)
	253	{
	254	adev->max_sectors = 256;
	255	}
	256
	257	static struct scsi_host_template pdc_sht = {
	258	.module = THIS_MODULE,
	259	.name = DRV_NAME,
	260	.ioctl = ata_scsi_ioctl,
	261	.queuecommand = ata_scsi_queuecmd,
	262	.can_queue = ATA_DEF_QUEUE,
	263	.this_id = ATA_SHT_THIS_ID,
	264	.sg_tablesize = LIBATA_MAX_PRD,
	265	.max_sectors = ATA_MAX_SECTORS,
	266	.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
	267	.emulated = ATA_SHT_EMULATED,
	268	.use_clustering = ATA_SHT_USE_CLUSTERING,
	269	.proc_name = DRV_NAME,
	270	.dma_boundary = ATA_DMA_BOUNDARY,
	271	.slave_configure = ata_scsi_slave_config,
afdfe899	272	.slave_destroy = ata_scsi_slave_destroy,
669a5db4 JG	273	.bios_param = ata_std_bios_param,
	274	};
	275
	276	static struct ata_port_operations pdc2024x_port_ops = {
	277	.port_disable = ata_port_disable,
	278	.set_piomode = pdc_set_piomode,
	279	.set_dmamode = pdc_set_dmamode,
	280	.mode_filter = ata_pci_default_filter,
	281	.tf_load = ata_tf_load,
	282	.tf_read = ata_tf_read,
	283	.check_status = ata_check_status,
	284	.exec_command = ata_exec_command,
	285	.dev_select = ata_std_dev_select,
	286
	287	.freeze = ata_bmdma_freeze,
	288	.thaw = ata_bmdma_thaw,
	289	.error_handler = pdc2024x_error_handler,
	290	.post_internal_cmd = ata_bmdma_post_internal_cmd,
	291
	292	.bmdma_setup = ata_bmdma_setup,
	293	.bmdma_start = ata_bmdma_start,
	294	.bmdma_stop = ata_bmdma_stop,
	295	.bmdma_status = ata_bmdma_status,
	296
	297	.qc_prep = ata_qc_prep,
	298	.qc_issue = ata_qc_issue_prot,
	299	.data_xfer = ata_pio_data_xfer,
	300
	301	.irq_handler = ata_interrupt,
	302	.irq_clear = ata_bmdma_irq_clear,
85cd7251	303
669a5db4 JG	304	.port_start = ata_port_start,
	305	.port_stop = ata_port_stop,
	306	.host_stop = ata_host_stop
85cd7251	307	};
669a5db4 JG	308
	309	static struct ata_port_operations pdc2026x_port_ops = {
	310	.port_disable = ata_port_disable,
	311	.set_piomode = pdc_set_piomode,
	312	.set_dmamode = pdc_set_dmamode,
	313	.mode_filter = ata_pci_default_filter,
	314	.tf_load = ata_tf_load,
	315	.tf_read = ata_tf_read,
	316	.check_status = ata_check_status,
	317	.exec_command = ata_exec_command,
	318	.dev_select = ata_std_dev_select,
	319	.dev_config = pdc2026x_dev_config,
	320
	321	.freeze = ata_bmdma_freeze,
	322	.thaw = ata_bmdma_thaw,
	323	.error_handler = pdc2026x_error_handler,
	324	.post_internal_cmd = ata_bmdma_post_internal_cmd,
	325
	326	.bmdma_setup = ata_bmdma_setup,
	327	.bmdma_start = pdc2026x_bmdma_start,
	328	.bmdma_stop = pdc2026x_bmdma_stop,
	329	.bmdma_status = ata_bmdma_status,
	330
	331	.qc_prep = ata_qc_prep,
	332	.qc_issue = ata_qc_issue_prot,
	333	.data_xfer = ata_pio_data_xfer,
	334
	335	.irq_handler = ata_interrupt,
	336	.irq_clear = ata_bmdma_irq_clear,
85cd7251	337
669a5db4 JG	338	.port_start = ata_port_start,
	339	.port_stop = ata_port_stop,
	340	.host_stop = ata_host_stop
85cd7251	341	};
669a5db4 JG	342
	343	static int pdc_init_one(struct pci_dev dev, const struct pci_device_id id)
	344	{
	345	static struct ata_port_info info[3] = {
	346	{
	347	.sht = &pdc_sht,
	348	.flags = ATA_FLAG_SLAVE_POSS \| ATA_FLAG_SRST,
	349	.pio_mask = 0x1f,
	350	.mwdma_mask = 0x07,
	351	.udma_mask = ATA_UDMA2,
	352	.port_ops = &pdc2024x_port_ops
85cd7251	353	},
669a5db4 JG	354	{
	355	.sht = &pdc_sht,
	356	.flags = ATA_FLAG_SLAVE_POSS \| ATA_FLAG_SRST,
	357	.pio_mask = 0x1f,
	358	.mwdma_mask = 0x07,
	359	.udma_mask = ATA_UDMA4,
	360	.port_ops = &pdc2026x_port_ops
	361	},
	362	{
	363	.sht = &pdc_sht,
	364	.flags = ATA_FLAG_SLAVE_POSS \| ATA_FLAG_SRST,
	365	.pio_mask = 0x1f,
	366	.mwdma_mask = 0x07,
	367	.udma_mask = ATA_UDMA5,
	368	.port_ops = &pdc2026x_port_ops
	369	}
85cd7251	370
669a5db4 JG	371	};
	372	static struct ata_port_info *port_info[2];
	373
	374	port_info[0] = port_info[1] = &info[id->driver_data];
85cd7251	375
669a5db4 JG	376	if (dev->device == PCI_DEVICE_ID_PROMISE_20265) {
	377	struct pci_dev *bridge = dev->bus->self;
	378	/* Don't grab anything behind a Promise I2O RAID */
	379	if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
	380	if( bridge->device == PCI_DEVICE_ID_INTEL_I960)
	381	return -ENODEV;
	382	if( bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
	383	return -ENODEV;
	384	}
	385	}
	386	return ata_pci_init_one(dev, port_info, 2);
	387	}
	388
2d2744fc JG	389	static const struct pci_device_id pdc[] = {
	390	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
	391	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
	392	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 },
	393	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 },
	394	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 },
	395
	396	{ },
669a5db4 JG	397	};
	398
	399	static struct pci_driver pdc_pci_driver = {
2d2744fc	400	.name = DRV_NAME,
669a5db4 JG	401	.id_table = pdc,
	402	.probe = pdc_init_one,
	403	.remove = ata_pci_remove_one
	404	};
	405
	406	static int __init pdc_init(void)
	407	{
	408	return pci_register_driver(&pdc_pci_driver);
	409	}
	410
669a5db4 JG	411	static void __exit pdc_exit(void)
	412	{
	413	pci_unregister_driver(&pdc_pci_driver);
	414	}
	415
669a5db4 JG	416	MODULE_AUTHOR("Alan Cox");
	417	MODULE_DESCRIPTION("low-level driver for Promise 2024x and 20262-20267");
	418	MODULE_LICENSE("GPL");
	419	MODULE_DEVICE_TABLE(pci, pdc);
	420	MODULE_VERSION(DRV_VERSION);
	421
	422	module_init(pdc_init);
	423	module_exit(pdc_exit);